This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.1.51-rc1
Yonghong Song yonghong.song@linux.dev kallsyms: Fix kallsyms_selftest failure
Helge Deller deller@gmx.de io_uring/parisc: Adjust pgoff in io_uring mmap() for parisc
Helge Deller deller@gmx.de parisc: sys_parisc: parisc_personality() is called from asm code
John David Anglin dave@parisc-linux.org parisc: Cleanup mmap implementation regarding color alignment
Helge Deller deller@gmx.de lockdep: fix static memory detection even more
James Morse james.morse@arm.com ARM: module: Use module_init_layout_section() to spot init sections
James Morse james.morse@arm.com arm64: module: Use module_init_layout_section() to spot init sections
Arnd Bergmann arnd@arndb.de arm64: module-plts: inline linux/moduleloader.h
James Morse james.morse@arm.com module: Expose module_init_layout_section()
Mario Limonciello mario.limonciello@amd.com ACPI: thermal: Drop nocrt parameter
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 4 - Makefile | 4 +- arch/arm/kernel/module-plts.c | 2 +- arch/arm64/kernel/module-plts.c | 3 +- arch/parisc/kernel/sys_parisc.c | 173 +++++++++--------------- arch/x86/include/asm/sections.h | 18 --- drivers/acpi/thermal.c | 6 +- include/linux/moduleloader.h | 5 + io_uring/io_uring.c | 46 +++++++ kernel/kallsyms.c | 17 +-- kernel/locking/lockdep.c | 36 ++--- kernel/module/main.c | 2 +- 12 files changed, 146 insertions(+), 170 deletions(-)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello mario.limonciello@amd.com
commit 5f641174a12b8a876a4101201a21ef4675ecc014 upstream.
The `nocrt` module parameter has no code associated with it and does nothing. As `crt=-1` has same functionality as what nocrt should be doing drop `nocrt` and associated documentation.
This should fix a quirk for Gigabyte GA-7ZX that used `nocrt` and thus didn't function properly.
Fixes: 8c99fdce3078 ("ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX") Signed-off-by: Mario Limonciello mario.limonciello@amd.com Cc: All applicable stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/admin-guide/kernel-parameters.txt | 4 ---- drivers/acpi/thermal.c | 6 +----- 2 files changed, 1 insertion(+), 9 deletions(-)
--- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -6164,10 +6164,6 @@ -1: disable all critical trip points in all thermal zones <degrees C>: override all critical trip points
- thermal.nocrt= [HW,ACPI] - Set to disable actions on ACPI thermal zone - critical and hot trip points. - thermal.off= [HW,ACPI] 1: disable ACPI thermal control
--- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -59,10 +59,6 @@ static int tzp; module_param(tzp, int, 0444); MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
-static int nocrt; -module_param(nocrt, int, 0); -MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points."); - static int off; module_param(off, int, 0); MODULE_PARM_DESC(off, "Set to disable ACPI thermal support."); @@ -1128,7 +1124,7 @@ static int thermal_act(const struct dmi_ static int thermal_nocrt(const struct dmi_system_id *d) { pr_notice("%s detected: disabling all critical thermal trip point actions.\n", d->ident); - nocrt = 1; + crt = -1; return 0; } static int thermal_tzp(const struct dmi_system_id *d) {
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Morse james.morse@arm.com
commit 2abcc4b5a64a65a2d2287ba0be5c2871c1552416 upstream.
module_init_layout_section() choses whether the core module loader considers a section as init or not. This affects the placement of the exit section when module unloading is disabled. This code will never run, so it can be free()d once the module has been initialised.
arm and arm64 need to count the number of PLTs they need before applying relocations based on the section name. The init PLTs are stored separately so they can be free()d. arm and arm64 both use within_module_init() to decide which list of PLTs to use when applying the relocation.
Because within_module_init()'s behaviour changes when module unloading is disabled, both architecture would need to take this into account when counting the PLTs.
Today neither architecture does this, meaning when module unloading is disabled there are insufficient PLTs in the init section to load some modules, resulting in warnings: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194
Instead of duplicating module_init_layout_section()s logic, expose it.
Reported-by: Adam Johnston adam.johnston@arm.com Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse james.morse@arm.com Signed-off-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/moduleloader.h | 5 +++++ kernel/module/main.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)
--- a/include/linux/moduleloader.h +++ b/include/linux/moduleloader.h @@ -39,6 +39,11 @@ bool module_init_section(const char *nam */ bool module_exit_section(const char *name);
+/* Describes whether within_module_init() will consider this an init section + * or not. This behaviour changes with CONFIG_MODULE_UNLOAD. + */ +bool module_init_layout_section(const char *sname); + /* * Apply the given relocation to the (simplified) ELF. Return -error * or 0. --- a/kernel/module/main.c +++ b/kernel/module/main.c @@ -1401,7 +1401,7 @@ long module_get_offset(struct module *mo return ret; }
-static bool module_init_layout_section(const char *sname) +bool module_init_layout_section(const char *sname) { #ifndef CONFIG_MODULE_UNLOAD if (module_exit_section(sname))
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann arnd@arndb.de
commit 60a0aab7463ee69296692d980b96510ccce3934e upstream.
module_frob_arch_sections() is declared in moduleloader.h, but that is not included before the definition:
arch/arm64/kernel/module-plts.c:286:5: error: no previous prototype for 'module_frob_arch_sections' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Kees Cook keescook@chromium.org Acked-by: Ard Biesheuvel ardb@kernel.org Link: https://lore.kernel.org/r/20230516160642.523862-11-arnd@kernel.org Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kernel/module-plts.c | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -7,6 +7,7 @@ #include <linux/ftrace.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/moduleloader.h> #include <linux/sort.h>
static struct plt_entry __get_adrp_add_pair(u64 dst, u64 pc,
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Morse james.morse@arm.com
commit f928f8b1a2496e7af95b860f9acf553f20f68f16 upstream.
Today module_frob_arch_sections() spots init sections from their 'init' prefix, and uses this to keep the init PLTs separate from the rest.
module_emit_plt_entry() uses within_module_init() to determine if a location is in the init text or not, but this depends on whether core code thought this was an init section.
Naturally the logic is different.
module_init_layout_section() groups the init and exit text together if module unloading is disabled, as the exit code will never run. The result is kernels with this configuration can't load all their modules because there are not enough PLTs for the combined init+exit section.
This results in the following: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194
A previous patch exposed module_init_layout_section(), use that so the logic is the same.
Reported-by: Adam Johnston adam.johnston@arm.com Tested-by: Adam Johnston adam.johnston@arm.com Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org # 5.15.x: 60a0aab7463ee69 arm64: module-plts: inline linux/moduleloader.h Cc: stable@vger.kernel.org # 5.15.x Signed-off-by: James Morse james.morse@arm.com Acked-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kernel/module-plts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -344,7 +344,7 @@ int module_frob_arch_sections(Elf_Ehdr * if (nents) sort(rels, nents, sizeof(Elf64_Rela), cmp_rela, NULL);
- if (!str_has_prefix(secstrings + dstsec->sh_name, ".init")) + if (!module_init_layout_section(secstrings + dstsec->sh_name)) core_plts += count_plts(syms, rels, numrels, sechdrs[i].sh_info, dstsec); else
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Morse james.morse@arm.com
commit a6846234f45801441f0e31a8b37f901ef0abd2df upstream.
Today module_frob_arch_sections() spots init sections from their 'init' prefix, and uses this to keep the init PLTs separate from the rest.
get_module_plt() uses within_module_init() to determine if a location is in the init text or not, but this depends on whether core code thought this was an init section.
Naturally the logic is different.
module_init_layout_section() groups the init and exit text together if module unloading is disabled, as the exit code will never run. The result is kernels with this configuration can't load all their modules because there are not enough PLTs for the combined init+exit section.
A previous patch exposed module_init_layout_section(), use that so the logic is the same.
Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse james.morse@arm.com Signed-off-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/kernel/module-plts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -256,7 +256,7 @@ int module_frob_arch_sections(Elf_Ehdr * /* sort by type and symbol index */ sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
- if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0) + if (!module_init_layout_section(secstrings + dstsec->sh_name)) core_plts += count_plts(syms, dstsec->sh_addr, rels, numrels, s->sh_info); else
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
commit 0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195 upstream.
On the parisc architecture, lockdep reports for all static objects which are in the __initdata section (e.g. "setup_done" in devtmpfs, "kthreadd_done" in init/main.c) this warning:
INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the __initdata section, but the section itself is on parisc outside of range from _stext to _end, which is why the static_obj() functions returns a wrong answer.
While fixing this issue, I noticed that the whole existing check can be simplified a lot. Instead of checking against the _stext and _end symbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existing is_kernel_core_data() macro.
In addition objects in the __initdata section can be checked with init_section_contains(), and is_kernel_rodata() allows keys to be in the _ro_after_init section.
This partly reverts and simplifies commit bac59d18c701 ("x86/setup: Fix static memory detection").
Link: https://lkml.kernel.org/r/ZNqrLRaOi/3wPAdp@p100 Fixes: bac59d18c701 ("x86/setup: Fix static memory detection") Signed-off-by: Helge Deller deller@gmx.de Cc: Borislav Petkov bp@suse.de Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Guenter Roeck linux@roeck-us.net Cc: Peter Zijlstra peterz@infradead.org Cc: "Rafael J. Wysocki" rafael@kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/sections.h | 18 ------------------ kernel/locking/lockdep.c | 36 ++++++++++++++---------------------- 2 files changed, 14 insertions(+), 40 deletions(-)
--- a/arch/x86/include/asm/sections.h +++ b/arch/x86/include/asm/sections.h @@ -2,8 +2,6 @@ #ifndef _ASM_X86_SECTIONS_H #define _ASM_X86_SECTIONS_H
-#define arch_is_kernel_initmem_freed arch_is_kernel_initmem_freed - #include <asm-generic/sections.h> #include <asm/extable.h>
@@ -18,20 +16,4 @@ extern char __end_of_kernel_reserve[];
extern unsigned long _brk_start, _brk_end;
-static inline bool arch_is_kernel_initmem_freed(unsigned long addr) -{ - /* - * If _brk_start has not been cleared, brk allocation is incomplete, - * and we can not make assumptions about its use. - */ - if (_brk_start) - return 0; - - /* - * After brk allocation is complete, space between _brk_end and _end - * is available for allocation. - */ - return addr >= _brk_end && addr < (unsigned long)&_end; -} - #endif /* _ASM_X86_SECTIONS_H */ --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -817,34 +817,26 @@ static int very_verbose(struct lock_clas * Is this the address of a static object: */ #ifdef __KERNEL__ -/* - * Check if an address is part of freed initmem. After initmem is freed, - * memory can be allocated from it, and such allocations would then have - * addresses within the range [_stext, _end]. - */ -#ifndef arch_is_kernel_initmem_freed -static int arch_is_kernel_initmem_freed(unsigned long addr) -{ - if (system_state < SYSTEM_FREEING_INITMEM) - return 0; - - return init_section_contains((void *)addr, 1); -} -#endif - static int static_obj(const void *obj) { - unsigned long start = (unsigned long) &_stext, - end = (unsigned long) &_end, - addr = (unsigned long) obj; + unsigned long addr = (unsigned long) obj;
- if (arch_is_kernel_initmem_freed(addr)) - return 0; + if (is_kernel_core_data(addr)) + return 1; + + /* + * keys are allowed in the __ro_after_init section. + */ + if (is_kernel_rodata(addr)) + return 1;
/* - * static variable? + * in initdata section and used during bootup only? + * NOTE: On some platforms the initdata section is + * outside of the _stext ... _end range. */ - if ((addr >= start) && (addr < end)) + if (system_state < SYSTEM_FREEING_INITMEM && + init_section_contains((void *)addr, 1)) return 1;
/*
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: John David Anglin dave@parisc-linux.org
commit 567b35159e76997e95b643b9a8a5d9d2198f2522 upstream.
This change simplifies the randomization of file mapping regions. It reworks the code to remove duplication. The flow is now similar to that for mips. Finally, we consistently use the do_color_align variable to determine when color alignment is needed.
Tested on rp3440.
Signed-off-by: John David Anglin dave.anglin@bell.net Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/parisc/kernel/sys_parisc.c | 166 +++++++++++++++------------------------- 1 file changed, 63 insertions(+), 103 deletions(-)
--- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -25,31 +25,26 @@ #include <linux/random.h> #include <linux/compat.h>
-/* we construct an artificial offset for the mapping based on the physical - * address of the kernel mapping variable */ -#define GET_LAST_MMAP(filp) \ - (filp ? ((unsigned long) filp->f_mapping) >> 8 : 0UL) -#define SET_LAST_MMAP(filp, val) \ - { /* nothing */ } - -static int get_offset(unsigned int last_mmap) -{ - return (last_mmap & (SHM_COLOUR-1)) >> PAGE_SHIFT; -} +/* + * Construct an artificial page offset for the mapping based on the physical + * address of the kernel file mapping variable. + */ +#define GET_FILP_PGOFF(filp) \ + (filp ? (((unsigned long) filp->f_mapping) >> 8) \ + & ((SHM_COLOUR-1) >> PAGE_SHIFT) : 0UL)
-static unsigned long shared_align_offset(unsigned int last_mmap, +static unsigned long shared_align_offset(unsigned long filp_pgoff, unsigned long pgoff) { - return (get_offset(last_mmap) + pgoff) << PAGE_SHIFT; + return (filp_pgoff + pgoff) << PAGE_SHIFT; }
static inline unsigned long COLOR_ALIGN(unsigned long addr, - unsigned int last_mmap, unsigned long pgoff) + unsigned long filp_pgoff, unsigned long pgoff) { unsigned long base = (addr+SHM_COLOUR-1) & ~(SHM_COLOUR-1); unsigned long off = (SHM_COLOUR-1) & - (shared_align_offset(last_mmap, pgoff) << PAGE_SHIFT); - + shared_align_offset(filp_pgoff, pgoff); return base + off; }
@@ -98,126 +93,91 @@ static unsigned long mmap_upper_limit(st return PAGE_ALIGN(STACK_TOP - stack_base); }
+enum mmap_allocation_direction {UP, DOWN};
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags) +static unsigned long arch_get_unmapped_area_common(struct file *filp, + unsigned long addr, unsigned long len, unsigned long pgoff, + unsigned long flags, enum mmap_allocation_direction dir) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma, *prev; - unsigned long task_size = TASK_SIZE; - int do_color_align, last_mmap; + unsigned long filp_pgoff; + int do_color_align; struct vm_unmapped_area_info info;
- if (len > task_size) + if (unlikely(len > TASK_SIZE)) return -ENOMEM;
do_color_align = 0; if (filp || (flags & MAP_SHARED)) do_color_align = 1; - last_mmap = GET_LAST_MMAP(filp); + filp_pgoff = GET_FILP_PGOFF(filp);
if (flags & MAP_FIXED) { - if ((flags & MAP_SHARED) && last_mmap && - (addr - shared_align_offset(last_mmap, pgoff)) + /* Even MAP_FIXED mappings must reside within TASK_SIZE */ + if (TASK_SIZE - len < addr) + return -EINVAL; + + if ((flags & MAP_SHARED) && filp && + (addr - shared_align_offset(filp_pgoff, pgoff)) & (SHM_COLOUR - 1)) return -EINVAL; - goto found_addr; + return addr; }
if (addr) { - if (do_color_align && last_mmap) - addr = COLOR_ALIGN(addr, last_mmap, pgoff); + if (do_color_align) + addr = COLOR_ALIGN(addr, filp_pgoff, pgoff); else addr = PAGE_ALIGN(addr);
vma = find_vma_prev(mm, addr, &prev); - if (task_size - len >= addr && + if (TASK_SIZE - len >= addr && (!vma || addr + len <= vm_start_gap(vma)) && (!prev || addr >= vm_end_gap(prev))) - goto found_addr; + return addr; }
- info.flags = 0; info.length = len; - info.low_limit = mm->mmap_legacy_base; - info.high_limit = mmap_upper_limit(NULL); - info.align_mask = last_mmap ? (PAGE_MASK & (SHM_COLOUR - 1)) : 0; - info.align_offset = shared_align_offset(last_mmap, pgoff); - addr = vm_unmapped_area(&info); + info.align_mask = do_color_align ? (PAGE_MASK & (SHM_COLOUR - 1)) : 0; + info.align_offset = shared_align_offset(filp_pgoff, pgoff);
-found_addr: - if (do_color_align && !last_mmap && !(addr & ~PAGE_MASK)) - SET_LAST_MMAP(filp, addr - (pgoff << PAGE_SHIFT)); + if (dir == DOWN) { + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + addr = vm_unmapped_area(&info); + if (!(addr & ~PAGE_MASK)) + return addr; + VM_BUG_ON(addr != -ENOMEM); + + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + }
- return addr; + info.flags = 0; + info.low_limit = mm->mmap_legacy_base; + info.high_limit = mmap_upper_limit(NULL); + return vm_unmapped_area(&info); }
-unsigned long -arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, - const unsigned long len, const unsigned long pgoff, - const unsigned long flags) +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) { - struct vm_area_struct *vma, *prev; - struct mm_struct *mm = current->mm; - unsigned long addr = addr0; - int do_color_align, last_mmap; - struct vm_unmapped_area_info info; - - /* requested length too big for entire address space */ - if (len > TASK_SIZE) - return -ENOMEM; - - do_color_align = 0; - if (filp || (flags & MAP_SHARED)) - do_color_align = 1; - last_mmap = GET_LAST_MMAP(filp); - - if (flags & MAP_FIXED) { - if ((flags & MAP_SHARED) && last_mmap && - (addr - shared_align_offset(last_mmap, pgoff)) - & (SHM_COLOUR - 1)) - return -EINVAL; - goto found_addr; - } - - /* requesting a specific address */ - if (addr) { - if (do_color_align && last_mmap) - addr = COLOR_ALIGN(addr, last_mmap, pgoff); - else - addr = PAGE_ALIGN(addr); - - vma = find_vma_prev(mm, addr, &prev); - if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vm_start_gap(vma)) && - (!prev || addr >= vm_end_gap(prev))) - goto found_addr; - } - - info.flags = VM_UNMAPPED_AREA_TOPDOWN; - info.length = len; - info.low_limit = PAGE_SIZE; - info.high_limit = mm->mmap_base; - info.align_mask = last_mmap ? (PAGE_MASK & (SHM_COLOUR - 1)) : 0; - info.align_offset = shared_align_offset(last_mmap, pgoff); - addr = vm_unmapped_area(&info); - if (!(addr & ~PAGE_MASK)) - goto found_addr; - VM_BUG_ON(addr != -ENOMEM); - - /* - * A failed mmap() very likely causes application failure, - * so fall back to the bottom-up function here. This scenario - * can happen with large stack limits and large mmap() - * allocations. - */ - return arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - -found_addr: - if (do_color_align && !last_mmap && !(addr & ~PAGE_MASK)) - SET_LAST_MMAP(filp, addr - (pgoff << PAGE_SHIFT)); + return arch_get_unmapped_area_common(filp, + addr, len, pgoff, flags, UP); +}
- return addr; +unsigned long arch_get_unmapped_area_topdown(struct file *filp, + unsigned long addr, unsigned long len, unsigned long pgoff, + unsigned long flags) +{ + return arch_get_unmapped_area_common(filp, + addr, len, pgoff, flags, DOWN); }
static int mmap_is_legacy(void)
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
commit b5d89408b9fb21258f7c371d6d48a674f60f7181 upstream.
Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/parisc/kernel/sys_parisc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -24,6 +24,7 @@ #include <linux/personality.h> #include <linux/random.h> #include <linux/compat.h> +#include <linux/elf-randomize.h>
/* * Construct an artificial page offset for the mapping based on the physical @@ -339,7 +340,7 @@ asmlinkage long parisc_fallocate(int fd, ((u64)lenhi << 32) | lenlo); }
-long parisc_personality(unsigned long personality) +asmlinkage long parisc_personality(unsigned long personality) { long err;
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
Vidra Jonas reported issues on parisc with libuv which then triggers build errors with cmake. Debugging shows that those issues stem from io_uring().
I was not able to easily pull in upstream commits directly, so here is IMHO the least invasive manual backport of the following upstream commits to fix the cache aliasing issues on parisc on kernel 6.1 with io_uring:
56675f8b9f9b ("io_uring/parisc: Adjust pgoff in io_uring mmap() for parisc") 32832a407a71 ("io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()") d808459b2e31 ("io_uring: Adjust mapping wrt architecture aliasing requirements")
With this patch kernel 6.1 has all relevant mmap changes and is identical to kernel 6.5 with regard to mmap() in io_uring.
Signed-off-by: Helge Deller deller@gmx.de Reported-by: Vidra.Jonas@seznam.cz Link: https://lore.kernel.org/linux-parisc/520.NvTX.6mXZpmfh4Ju.1awpAS@seznam.cz/ Cc: Sam James sam@gentoo.org Cc: John David Anglin dave.anglin@bell.net Cc: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- io_uring/io_uring.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)
--- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -72,6 +72,7 @@ #include <linux/io_uring.h> #include <linux/audit.h> #include <linux/security.h> +#include <asm/shmparam.h>
#define CREATE_TRACE_POINTS #include <trace/events/io_uring.h> @@ -3110,6 +3111,49 @@ static __cold int io_uring_mmap(struct f return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot); }
+static unsigned long io_uring_mmu_get_unmapped_area(struct file *filp, + unsigned long addr, unsigned long len, + unsigned long pgoff, unsigned long flags) +{ + void *ptr; + + /* + * Do not allow to map to user-provided address to avoid breaking the + * aliasing rules. Userspace is not able to guess the offset address of + * kernel kmalloc()ed memory area. + */ + if (addr) + return -EINVAL; + + ptr = io_uring_validate_mmap_request(filp, pgoff, len); + if (IS_ERR(ptr)) + return -ENOMEM; + + /* + * Some architectures have strong cache aliasing requirements. + * For such architectures we need a coherent mapping which aliases + * kernel memory *and* userspace memory. To achieve that: + * - use a NULL file pointer to reference physical memory, and + * - use the kernel virtual address of the shared io_uring context + * (instead of the userspace-provided address, which has to be 0UL + * anyway). + * - use the same pgoff which the get_unmapped_area() uses to + * calculate the page colouring. + * For architectures without such aliasing requirements, the + * architecture will return any suitable mapping because addr is 0. + */ + filp = NULL; + flags |= MAP_SHARED; + pgoff = 0; /* has been translated to ptr above */ +#ifdef SHM_COLOUR + addr = (uintptr_t) ptr; + pgoff = addr >> PAGE_SHIFT; +#else + addr = 0UL; +#endif + return current->mm->get_unmapped_area(filp, addr, len, pgoff, flags); +} + #else /* !CONFIG_MMU */
static int io_uring_mmap(struct file *file, struct vm_area_struct *vma) @@ -3324,6 +3368,8 @@ static const struct file_operations io_u #ifndef CONFIG_MMU .get_unmapped_area = io_uring_nommu_get_unmapped_area, .mmap_capabilities = io_uring_nommu_mmap_capabilities, +#else + .get_unmapped_area = io_uring_mmu_get_unmapped_area, #endif .poll = io_uring_poll, #ifdef CONFIG_PROC_FS
6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yonghong Song yonghong.song@linux.dev
commit 33f0467fe06934d5e4ea6e24ce2b9c65ce618e26 upstream.
Kernel test robot reported a kallsyms_test failure when clang lto is enabled (thin or full) and CONFIG_KALLSYMS_SELFTEST is also enabled. I can reproduce in my local environment with the following error message with thin lto: [ 1.877897] kallsyms_selftest: Test for 1750th symbol failed: (tsc_cs_mark_unstable) addr=ffffffff81038090 [ 1.877901] kallsyms_selftest: abort
It appears that commit 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions") caused the failure. Commit 8cc32a9bbf29 changed cleanup_symbol_name() based on ".llvm." instead of '.' where ".llvm." is appended to a before-lto-optimization local symbol name. We need to propagate such knowledge in kallsyms_selftest.c as well.
Further more, compare_symbol_name() in kallsyms.c needs change as well. In scripts/kallsyms.c, kallsyms_names and kallsyms_seqs_of_names are used to record symbol names themselves and index to symbol names respectively. For example: kallsyms_names: ... __amd_smn_rw._entry <== seq 1000 __amd_smn_rw._entry.5 <== seq 1001 __amd_smn_rw.llvm.<hash> <== seq 1002 ...
kallsyms_seqs_of_names are sorted based on cleanup_symbol_name() through, so the order in kallsyms_seqs_of_names actually has
index 1000: seq 1002 <== __amd_smn_rw.llvm.<hash> (actual symbol comparison using '__amd_smn_rw') index 1001: seq 1000 <== __amd_smn_rw._entry index 1002: seq 1001 <== __amd_smn_rw._entry.5
Let us say at a particular point, at index 1000, symbol '__amd_smn_rw.llvm.<hash>' is comparing to '__amd_smn_rw._entry' where '__amd_smn_rw._entry' is the one to search e.g., with function kallsyms_on_each_match_symbol(). The current implementation will find out '__amd_smn_rw._entry' is less than '__amd_smn_rw.llvm.<hash>' and then continue to search e.g., index 999 and never found a match although the actual index 1001 is a match.
To fix this issue, let us do cleanup_symbol_name() first and then do comparison. In the above case, comparing '__amd_smn_rw' vs '__amd_smn_rw._entry' and '__amd_smn_rw._entry' being greater than '__amd_smn_rw', the next comparison will be > index 1000 and eventually index 1001 will be hit an a match is found.
For any symbols not having '.llvm.' substr, there is no functionality change for compare_symbol_name().
Fixes: 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions") Reported-by: kernel test robot oliver.sang@intel.com Closes: https://lore.kernel.org/oe-lkp/202308232200.1c932a90-oliver.sang@intel.com Signed-off-by: Yonghong Song yonghong.song@linux.dev Reviewed-by: Song Liu song@kernel.org Reviewed-by: Zhen Lei thunder.leizhen@huawei.com Link: https://lore.kernel.org/r/20230825034659.1037627-1-yonghong.song@linux.dev Cc: stable@vger.kernel.org Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/kallsyms.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-)
--- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -188,16 +188,13 @@ static bool cleanup_symbol_name(char *s)
static int compare_symbol_name(const char *name, char *namebuf) { - int ret; - - ret = strcmp(name, namebuf); - if (!ret) - return ret; - - if (cleanup_symbol_name(namebuf) && !strcmp(name, namebuf)) - return 0; - - return ret; + /* The kallsyms_seqs_of_names is sorted based on names after + * cleanup_symbol_name() (see scripts/kallsyms.c) if clang lto is enabled. + * To ensure correct bisection in kallsyms_lookup_names(), do + * cleanup_symbol_name(namebuf) before comparing name and namebuf. + */ + cleanup_symbol_name(namebuf); + return strcmp(name, namebuf); }
static int kallsyms_lookup_names(const char *name,
On 8/31/23 04:10, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli florian.fainelli@broadcom.com
Hello,
On Thu, 31 Aug 2023 13:10:40 +0200 Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
Tested-by: SeongJae Park sj@kernel.org
[1] https://github.com/awslabs/damon-tests/tree/next/corr [2] 1767553758a6 ("Linux 6.1.51-rc1")
Thanks, SJ
[...]
---
# .config:1408:warning: override: reassigning to symbol CGROUPS ok 15 selftests: damon-tests: build_nomemcg.sh # kselftest dir '/home/sjpark/damon-tests-cont/linux/tools/testing/selftests/damon-tests' is in dirty state. # the log is at '/home/sjpark/log'. [32m ok 1 selftests: damon: debugfs_attrs.sh ok 2 selftests: damon: debugfs_schemes.sh ok 3 selftests: damon: debugfs_target_ids.sh ok 4 selftests: damon: debugfs_empty_targets.sh ok 5 selftests: damon: debugfs_huge_count_read_write.sh ok 6 selftests: damon: debugfs_duplicate_context_creation.sh ok 7 selftests: damon: sysfs.sh ok 1 selftests: damon-tests: kunit.sh ok 2 selftests: damon-tests: huge_count_read_write.sh ok 3 selftests: damon-tests: buffer_overflow.sh ok 4 selftests: damon-tests: rm_contexts.sh ok 5 selftests: damon-tests: record_null_deref.sh ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh ok 8 selftests: damon-tests: damo_tests.sh ok 9 selftests: damon-tests: masim-record.sh ok 10 selftests: damon-tests: build_i386.sh ok 11 selftests: damon-tests: build_m68k.sh ok 12 selftests: damon-tests: build_arm64.sh ok 13 selftests: damon-tests: build_i386_idle_flag.sh ok 14 selftests: damon-tests: build_i386_highpte.sh ok 15 selftests: damon-tests: build_nomemcg.sh [33m [92mPASS [39m _remote_run_corr.sh SUCCESS
On 8/31/23 4:10 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
On Thu, 31 Aug 2023 at 16:41, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 6.1.51-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-6.1.y * git commit: 1767553758a66ae5cc765f89bc22c22273b382a4 * git describe: v6.1.50-11-g1767553758a6 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.50...
## Test Regressions (compared to v6.1.50)
## Metric Regressions (compared to v6.1.50)
## Test Fixes (compared to v6.1.50)
## Metric Fixes (compared to v6.1.50)
## Test result summary total: 136400, pass: 115230, fail: 2624, skip: 18376, xfail: 170
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 144 total, 142 passed, 2 failed * arm64: 56 total, 53 passed, 3 failed * i386: 37 total, 32 passed, 5 failed * mips: 30 total, 28 passed, 2 failed * parisc: 4 total, 4 passed, 0 failed * powerpc: 38 total, 36 passed, 2 failed * riscv: 15 total, 12 passed, 3 failed * s390: 16 total, 14 passed, 2 failed * sh: 14 total, 12 passed, 2 failed * sparc: 8 total, 8 passed, 0 failed * x86_64: 45 total, 39 passed, 6 failed
## Test suites summary * boot * kselftest-android * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-filesystems-epoll * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-user_events * kselftest-vDSO * kselftest-vm * kselftest-watchdog * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * perf * rcutorture * v4l2-compliance
-- Linaro LKFT https://lkft.linaro.org
On Thu, Aug 31, 2023 at 01:10:40PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Successfully compiled and installed bindeb-pkgs on my computer (Acer Aspire E15, Intel Core i3 Haswell). No noticeable regressions.
Tested-by: Bagas Sanjaya bagasdotme@gmail.com
Hi Greg,
On Thu, Aug 31, 2023 at 01:10:40PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
Build test (gcc version 12.3.1 20230829): mips: 52 configs -> no failure arm: 100 configs -> no failure arm64: 3 configs -> no failure x86_64: 4 configs -> no failure alpha allmodconfig -> no failure csky allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure
Boot test: x86_64: Booted on my test laptop. No regression. x86_64: Booted on qemu. No regression. [1] arm64: Booted on rpi4b (4GB model). No regression. [2] mips: Booted on ci20 board. No regression. [3]
[1]. https://openqa.qa.codethink.co.uk/tests/4888 [2]. https://openqa.qa.codethink.co.uk/tests/4890 [3]. https://openqa.qa.codethink.co.uk/tests/4889
Tested-by: Sudip Mukherjee sudip.mukherjee@codethink.co.uk
On 8/31/23 05:10, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
Hi Greg
On Thu, Aug 31, 2023 at 8:12 PM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
6.1.51-rc1 tested.
Build successfully completed. Boot successfully completed. No dmesg regressions. Video output normal. Sound output normal.
Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)
Thanks
Tested-by: Takeshi Ogasawara takeshi.ogasawara@futuring-girl.com
On Thu, 31 Aug 2023 13:10:40 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.51-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v6.1: 11 builds: 11 pass, 0 fail 28 boots: 28 pass, 0 fail 130 tests: 130 pass, 0 fail
Linux version: 6.1.51-rc1-g1767553758a6 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Thu, Aug 31, 2023 at 01:10:40PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.1.51 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 02 Sep 2023 11:08:22 +0000. Anything received after that time might be too late.
Build results: total: 157 pass: 157 fail: 0 Qemu test results: total: 521 pass: 521 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
linux-stable-mirror@lists.linaro.org