From: YueHaibing yuehaibing@huawei.com
[ Upstream commit 28535877ac5b2b84f0d394fd67a5ec71c0c48b10 ]
It should use ad7797_attribute_group in ad7797_info, according to commit ("iio:ad7793: Add support for the ad7796 and ad7797").
Scale is fixed for the ad7796 and not programmable, hence should not have the scale_available attribute.
Fixes: fd1a8b912841 ("iio:ad7793: Add support for the ad7796 and ad7797") Signed-off-by: YueHaibing yuehaibing@huawei.com Reviewed-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/adc/ad7793.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index 91d34ed756eaf..fe0c5a155e211 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -579,7 +579,7 @@ static const struct iio_info ad7797_info = { .read_raw = &ad7793_read_raw, .write_raw = &ad7793_write_raw, .write_raw_get_fmt = &ad7793_write_raw_get_fmt, - .attrs = &ad7793_attribute_group, + .attrs = &ad7797_attribute_group, .validate_trigger = ad_sd_validate_trigger, .driver_module = THIS_MODULE, };
From: Tyler Hicks tyhicks@linux.microsoft.com
[ Upstream commit b87080eab4c1377706c113fc9c0157f19ea8fed1 ]
After successfully running the IPC msgque test once, subsequent runs result in a test failure:
$ sudo ./run_kselftest.sh TAP version 13 1..1 # selftests: ipc: msgque # Failed to get stats for IPC queue with id 0 # Failed to dump queue: -22 # Bail out! # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 not ok 1 selftests: ipc: msgque # exit=1
The dump_queue() function loops through the possible message queue index values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id represents the index value. The first time the test is ran, the initial index value of 0 is valid and the test is able to complete. The index value of 0 is not valid in subsequent test runs and the loop attempts to try index values of 1, 2, 3, and so on until a valid index value is found that corresponds to the message queue created earlier in the test.
The msgctl() syscall returns -1 and sets errno to EINVAL when invalid index values are used. The test failure is caused by incorrectly comparing errno to -EINVAL when cycling through possible index values.
Fix invalid test failures on subsequent runs of the msgque test by correctly comparing errno values to a non-negated EINVAL.
Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test") Signed-off-by: Tyler Hicks tyhicks@linux.microsoft.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/ipc/msgque.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ipc/msgque.c b/tools/testing/selftests/ipc/msgque.c index 1b2ce334bb3f0..47c074d73e610 100644 --- a/tools/testing/selftests/ipc/msgque.c +++ b/tools/testing/selftests/ipc/msgque.c @@ -135,7 +135,7 @@ int dump_queue(struct msgque_data *msgque) for (kern_id = 0; kern_id < 256; kern_id++) { ret = msgctl(kern_id, MSG_STAT, &ds); if (ret < 0) { - if (errno == -EINVAL) + if (errno == EINVAL) continue; printf("Failed to get stats for IPC queue with id %d\n", kern_id);
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit 7717cbec172c3554d470023b4020d5781961187e ]
i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the refcount of the "notif_urb".
When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which forget to decrease the refcnt increased by usb_get_urb(), causing a refcnt leak.
Fix this issue by calling usb_put_urb() before the i2400mu_bus_bm_wait_for_ack() returns.
Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wimax/i2400m/usb-fw.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c index e74664b84925e..4e4167976acf6 100644 --- a/drivers/net/wimax/i2400m/usb-fw.c +++ b/drivers/net/wimax/i2400m/usb-fw.c @@ -354,6 +354,7 @@ out: usb_autopm_put_interface(i2400mu->usb_iface); d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n", i2400m, ack, ack_size, (long) result); + usb_put_urb(¬if_urb); return result;
error_exceeded:
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ]
When team mode is changed or set, the team_mode_get() is called to check whether the mode module is inserted or not. If the mode module is not inserted, it calls the request_module(). In the request_module(), it creates a child process, which is the "modprobe" process and waits for the done of the child process. At this point, the following locks were used. down_read(&cb_lock()); by genl_rcv() genl_lock(); by genl_rcv_msc() rtnl_lock(); by team_nl_cmd_options_set() mutex_lock(&team->lock); by team_nl_team_get()
Concurrently, the team module could be removed by rmmod or "modprobe -r" The __exit function of team module is team_module_exit(), which calls team_nl_fini() and it tries to acquire following locks. down_write(&cb_lock); genl_lock(); Because of the genl_lock() and cb_lock, this process can't be finished earlier than request_module() routine.
The problem secenario. CPU0 CPU1 team_mode_get request_module() modprobe -r team_mode_roundrobin team <--(B) modprobe team <--(A) team_mode_roundrobin
By request_module(), the "modprobe team_mode_roundrobin" command will be executed. At this point, the modprobe process will decide that the team module should be inserted before team_mode_roundrobin. Because the team module is being removed.
By the module infrastructure, the same module insert/remove operations can't be executed concurrently. So, (A) waits for (B) but (B) also waits for (A) because of locks. So that the hang occurs at this point.
Test commands: while : do teamd -d & killall teamd & modprobe -rv team_mode_roundrobin & done
The approach of this patch is to hold the reference count of the team module if the team module is compiled as a module. If the reference count of the team module is not zero while request_module() is being called, the team module will not be removed at that moment. So that the above scenario could not occur.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo ap420073@gmail.com Reviewed-by: Jiri Pirko jiri@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/team/team.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index e51fb7cb77282..d0943415aeff1 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -466,6 +466,9 @@ static const struct team_mode *team_mode_get(const char *kind) struct team_mode_item *mitem; const struct team_mode *mode = NULL;
+ if (!try_module_get(THIS_MODULE)) + return NULL; + spin_lock(&mode_list_lock); mitem = __find_mode(kind); if (!mitem) { @@ -481,6 +484,7 @@ static const struct team_mode *team_mode_get(const char *kind) }
spin_unlock(&mode_list_lock); + module_put(THIS_MODULE); return mode; }
From: Ronnie Sahlberg lsahlber@redhat.com
[ Upstream commit fada37f6f62995cc449b36ebba1220594bfe55fe ]
We use a spinlock while we are reading and accessing the destination address for a server. We need to also use this spinlock to protect when we are modifying this address from reconn_set_ipaddr().
Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index cf104bbe30a14..c9793ce0d3368 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -338,8 +338,10 @@ static int reconn_set_ipaddr(struct TCP_Server_Info *server) return rc; }
+ spin_lock(&cifs_tcp_ses_lock); rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr, strlen(ipaddr)); + spin_unlock(&cifs_tcp_ses_lock); kfree(ipaddr);
return !rc ? -1 : 0;
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 4dee15b4fd0d61ec6bbd179238191e959d34cf7a ]
In the macvlan_device_event(), the list_first_entry_or_null() is used. This function could return null pointer if there is no node. But, the macvlan module doesn't check the null pointer. So, null-ptr-deref would occur.
bond0 | +----+-----+ | | macvlan0 macvlan1 | | dummy0 dummy1
The problem scenario. If dummy1 is removed, 1. ->dellink() of dummy1 is called. 2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module. 3. ->dellink() of macvlan1 is called. 4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module. 5. __bond_release_one() is called and it internally calls dev_set_mac_address(). 6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1, which is macvlan_set_mac_address(). 7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1. 8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module. 9. In the macvlan_device_event(), it calls list_first_entry_or_null(). At this point, dummy1 and macvlan1 were removed. So, list_first_entry_or_null() will return NULL.
Test commands: ip netns add nst ip netns exec nst ip link add bond0 type bond for i in {0..10} do ip netns exec nst ip link add dummy$i type dummy ip netns exec nst ip link add macvlan$i link dummy$i \ type macvlan mode passthru ip netns exec nst ip link set macvlan$i master bond0 done ip netns del nst
Splat looks like: [ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI [ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532 [ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.590469][ T146] Workqueue: netns cleanup_net [ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan] [ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2 [ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246 [ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360 [ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421 [ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008 [ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a [ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000 [ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0 [ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.603443][ T146] Call Trace: [ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables] [ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan] [ 40.605212][ T146] ? __module_text_address+0x13/0x140 [ 40.605842][ T146] notifier_call_chain+0x90/0x160 [ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0 [ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.607762][ T146] ? __module_text_address+0x13/0x140 [ 40.608440][ T146] ? notifier_call_chain+0x90/0x160 [ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0 [ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0 [ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding] [ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding] [ 40.617642][ T146] ? lock_downgrade+0x730/0x730 [ 40.618218][ T146] ? check_flags.part.42+0x450/0x450 [ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670 [ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180 [ 40.620117][ T146] ? wait_for_completion+0x250/0x250 [ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding] [ 40.621460][ T146] ? __module_text_address+0x13/0x140 [ 40.622097][ T146] notifier_call_chain+0x90/0x160 [ 40.622806][ T146] rollback_registered_many+0x660/0xcf0 [ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780 [ 40.624290][ T146] ? notifier_call_chain+0x90/0x160 [ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180 [ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30 [ 40.626421][ T146] ? mutex_is_locked+0x13/0x50 [ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240 [ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0 [ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390 [ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40 [ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0 [ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0 [ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140 [ 40.631554][ T146] cleanup_net+0x441/0x890 [ ... ]
Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/macvlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 84767722065a8..d5d4d109ee106 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1561,7 +1561,7 @@ static int macvlan_device_event(struct notifier_block *unused, struct macvlan_dev, list);
- if (macvlan_sync_address(vlan->dev, dev->dev_addr)) + if (vlan && macvlan_sync_address(vlan->dev, dev->dev_addr)) return NOTIFY_BAD;
break;
From: "Jeremie Francois (on alpha)" jeremie.francois@gmail.com
[ Upstream commit e461bc9f9ab105637b86065d24b0b83f182d477c ]
Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK.
E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s'
Signed-off-by: Jeremie Francois (on alpha) jeremie.francois@gmail.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/config | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/scripts/config b/scripts/config index 026aeb4f32ee3..73de17d396987 100755 --- a/scripts/config +++ b/scripts/config @@ -6,6 +6,9 @@ myname=${0##*/} # If no prefix forced, use the default CONFIG_ CONFIG_="${CONFIG_-CONFIG_}"
+# We use an uncommon delimiter for sed substitutions +SED_DELIM=$(echo -en "\001") + usage() { cat >&2 <<EOL Manipulate options in a .config file from the command line. @@ -82,7 +85,7 @@ txt_subst() { local infile="$3" local tmpfile="$infile.swp"
- sed -e "s:$before:$after:" "$infile" >"$tmpfile" + sed -e "s$SED_DELIM$before$SED_DELIM$after$SED_DELIM" "$infile" >"$tmpfile" # replace original file with the edited one mv "$tmpfile" "$infile" }
From: Ian Rogers irogers@google.com
[ Upstream commit f3bed55e850926614b9898fe982f66d2541a36a5 ]
Current logic yields the child task as the parent.
Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/
After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265)
Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by: KP Singh kpsingh@google.com Signed-off-by: Ian Rogers irogers@google.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/20200417182842.12522-1-irogers@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/events/core.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c index 203384a71feed..feff3ba98cc9f 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -5810,10 +5810,17 @@ static void perf_event_task_output(struct perf_event *event, goto out;
task_event->event_id.pid = perf_event_pid(event, task); - task_event->event_id.ppid = perf_event_pid(event, current); - task_event->event_id.tid = perf_event_tid(event, task); - task_event->event_id.ptid = perf_event_tid(event, current); + + if (task_event->event_id.header.type == PERF_RECORD_EXIT) { + task_event->event_id.ppid = perf_event_pid(event, + task->real_parent); + task_event->event_id.ptid = perf_event_pid(event, + task->real_parent); + } else { /* PERF_RECORD_FORK */ + task_event->event_id.ppid = perf_event_pid(event, current); + task_event->event_id.ptid = perf_event_tid(event, current); + }
task_event->event_id.time = perf_event_clock(event);
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 5990cdee689c6885b27c6d969a3d58b09002b0bc ]
0day reports over and over on an powerpc randconfig with clang:
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions
Remove the superfluous casts, which have been done previously for x86 and arm32 in commit dea632cadd12 ("lib/mpi: fix build with clang") and commit 7b7c1df2883d ("lib/mpi/longlong.h: fix building with 32-bit x86").
Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Acked-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://github.com/ClangBuiltLinux/linux/issues/991 Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- lib/mpi/longlong.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index d2ecf0a09180c..f1f31c754b3e6 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -756,22 +756,22 @@ do { \ do { \ if (__builtin_constant_p(bh) && (bh) == 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "%r" ((USItype)(ah)), \ "%r" ((USItype)(al)), \ "rI" ((USItype)(bl))); \ else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "%r" ((USItype)(ah)), \ "%r" ((USItype)(al)), \ "rI" ((USItype)(bl))); \ else \ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "%r" ((USItype)(ah)), \ "r" ((USItype)(bh)), \ "%r" ((USItype)(al)), \ @@ -781,36 +781,36 @@ do { \ do { \ if (__builtin_constant_p(ah) && (ah) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(bh)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else if (__builtin_constant_p(ah) && (ah) == ~(USItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(bh)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else if (__builtin_constant_p(bh) && (bh) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(ah)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(ah)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else \ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(ah)), \ "r" ((USItype)(bh)), \ "rI" ((USItype)(al)), \ @@ -821,7 +821,7 @@ do { \ do { \ USItype __m0 = (m0), __m1 = (m1); \ __asm__ ("mulhwu %0,%1,%2" \ - : "=r" ((USItype) ph) \ + : "=r" (ph) \ : "%r" (__m0), \ "r" (__m1)); \ (pl) = __m0 * __m1; \
From: Doug Berger opendmb@gmail.com
[ Upstream commit ecaeceb8a8a145d93c7e136f170238229165348f ]
The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign.
However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing.
This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface.
Signed-off-by: Doug Berger opendmb@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 34fae5576b603..4b3b396bd8ebe 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1575,7 +1575,8 @@ static struct sk_buff *bcmgenet_rx_refill(struct bcmgenet_priv *priv, dma_addr_t mapping;
/* Allocate a new Rx skb */ - skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT); + skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT, + GFP_ATOMIC | __GFP_NOWARN); if (!skb) { priv->mib.alloc_rx_buff_failed++; netif_err(priv, rx_err, priv->dev,
From: Doug Berger opendmb@gmail.com
[ Upstream commit 3554e54a46125030c534820c297ed7f6c3907e24 ]
The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign.
However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing.
This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface.
Signed-off-by: Doug Berger opendmb@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bcmsysport.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 3cb99ce7325b7..d46ea7a5e0886 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -526,7 +526,8 @@ static struct sk_buff *bcm_sysport_rx_refill(struct bcm_sysport_priv *priv, dma_addr_t mapping;
/* Allocate a new SKB for a new packet */ - skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH); + skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH, + GFP_ATOMIC | __GFP_NOWARN); if (!skb) { priv->mib.alloc_rx_buff_failed++; netif_err(priv, rx_err, ndev, "SKB alloc failed\n");
linux-stable-mirror@lists.linaro.org
-
Sasha Levin