This is a note to let you know that I've just added the patch titled

net: phy: micrel: Restore led_mode and clk_sel on resume

to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...

The filename of the patch is: net-phy-micrel-restore-led_mode-and-clk_sel-on-resume.patch and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.

From foo@baz Mon Apr 9 17:09:24 CEST 2018

From: Leonard Crestez leonard.crestez@nxp.com Date: Wed, 31 May 2017 13:29:30 +0300 Subject: net: phy: micrel: Restore led_mode and clk_sel on resume

From: Leonard Crestez leonard.crestez@nxp.com

[ Upstream commit 79e498a9c7da0737829ff864aae44df434105676 ]

These bits seem to be lost after a suspend/resume cycle so just set them again. Do this by splitting the handling of these bits into a function that is also called on resume.

This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.

Signed-off-by: Leonard Crestez leonard.crestez@nxp.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-)

--- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -268,23 +268,12 @@ out: return ret; }

-static int kszphy_config_init(struct phy_device *phydev) +/* Some config bits need to be set again on resume, handle them here. */ +static int kszphy_config_reset(struct phy_device *phydev) { struct kszphy_priv *priv = phydev->priv; - const struct kszphy_type *type; int ret;

- if (!priv) - return 0; - - type = priv->type; - - if (type->has_broadcast_disable) - kszphy_broadcast_disable(phydev); - - if (type->has_nand_tree_disable) - kszphy_nand_tree_disable(phydev); - if (priv->rmii_ref_clk_sel) { ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); if (ret) { @@ -295,7 +284,7 @@ static int kszphy_config_init(struct phy }

if (priv->led_mode >= 0) - kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode); + kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);

if (phy_interrupt_is_valid(phydev)) { int ctl = phy_read(phydev, MII_BMCR); @@ -311,6 +300,25 @@ static int kszphy_config_init(struct phy return 0; }

+static int kszphy_config_init(struct phy_device *phydev) +{ + struct kszphy_priv *priv = phydev->priv; + const struct kszphy_type *type; + + if (!priv) + return 0; + + type = priv->type; + + if (type->has_broadcast_disable) + kszphy_broadcast_disable(phydev); + + if (type->has_nand_tree_disable) + kszphy_nand_tree_disable(phydev); + + return kszphy_config_reset(phydev); +} + static int ksz8041_config_init(struct phy_device *phydev) { struct device_node *of_node = phydev->mdio.dev.of_node; @@ -715,8 +723,14 @@ static int kszphy_suspend(struct phy_dev

static int kszphy_resume(struct phy_device *phydev) { + int ret; + genphy_resume(phydev);

+ ret = kszphy_config_reset(phydev); + if (ret) + return ret; + /* Enable PHY Interrupts */ if (phy_interrupt_is_valid(phydev)) { phydev->interrupts = PHY_INTERRUPT_ENABLED;

Patches currently in stable-queue which might be from leonard.crestez@nxp.com are

queue-4.9/arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch queue-4.9/net-phy-micrel-restore-led_mode-and-clk_sel-on-resume.patch