This is the start of the stable review cycle for the 5.4.55 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.4.55-rc1
Vladimir Oltean vladimir.oltean@nxp.com Revert "dpaa_eth: fix usage as DSA master, try 3"
zhuguangqing zhuguangqing@xiaomi.com PM: wakeup: Show statistics for deleted wakeup sources again
Peng Fan peng.fan@nxp.com regmap: debugfs: check count when read regmap file
Kuniyuki Iwashima kuniyu@amazon.co.jp udp: Improve load balancing for SO_REUSEPORT.
Kuniyuki Iwashima kuniyu@amazon.co.jp udp: Copy has_conns in reuseport_grow().
Xin Long lucien.xin@gmail.com sctp: shrink stream outq when fails to do addstream reconf
Xin Long lucien.xin@gmail.com sctp: shrink stream outq only when new outcnt < old outcnt
Dan Carpenter dan.carpenter@oracle.com AX.25: Prevent integer overflows in connect and sendmsg
Yuchung Cheng ycheng@google.com tcp: allow at most one TLP probe per flight
David Howells dhowells@redhat.com rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA
Weilong Chen chenweilong@huawei.com rtnetlink: Fix memory(net_device) leak when ->newlink fails
Cong Wang xiyou.wangcong@gmail.com qrtr: orphan socket in qrtr_release()
Miaohe Lin linmiaohe@huawei.com net: udp: Fix wrong clean up for IS_UDPLITE macro
Xiongfeng Wang wangxiongfeng2@huawei.com net-sysfs: add a newline when printing 'tx_timeout' by sysfs
Wei Yongjun weiyongjun1@huawei.com ip6_gre: fix null-ptr-deref in ip6gre_init_net()
Xie He xie.he.0141@gmail.com drivers/net/wan/x25_asy: Fix to make it work
Subash Abhinov Kasiviswanathan subashab@codeaurora.org dev: Defer free of skbs in flush_backlog
Peilin Ye yepeilin.cs@gmail.com AX.25: Prevent out-of-bounds read in ax25_sendmsg()
Peilin Ye yepeilin.cs@gmail.com AX.25: Fix out-of-bounds read in ax25_connect()
-------------
Diffstat:
Makefile | 4 ++-- drivers/base/power/wakeup.c | 3 +++ drivers/base/regmap/regmap-debugfs.c | 6 ++++++ drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +- drivers/net/wan/x25_asy.c | 21 +++++++++++++------- include/linux/tcp.h | 4 +++- net/ax25/af_ax25.c | 10 ++++++++-- net/core/dev.c | 2 +- net/core/net-sysfs.c | 2 +- net/core/rtnetlink.c | 3 ++- net/core/sock_reuseport.c | 1 + net/ipv4/tcp_input.c | 11 ++++++----- net/ipv4/tcp_output.c | 13 ++++++++----- net/ipv4/udp.c | 17 +++++++++------- net/ipv6/ip6_gre.c | 11 ++++++----- net/ipv6/udp.c | 17 +++++++++------- net/qrtr/qrtr.c | 1 + net/rxrpc/recvmsg.c | 2 +- net/rxrpc/sendmsg.c | 2 +- net/sctp/stream.c | 27 +++++++++++++++++--------- 20 files changed, 103 insertions(+), 56 deletions(-)
From: Peilin Ye yepeilin.cs@gmail.com
[ Upstream commit 2f2a7ffad5c6cbf3d438e813cfdc88230e185ba6 ]
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient. ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis` equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such a case, ax25_connect() reaches into the uninitialized portion of the `struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)`.
Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af6... Signed-off-by: Peilin Ye yepeilin.cs@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ax25/af_ax25.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1187,7 +1187,9 @@ static int __must_check ax25_connect(str if (addr_len > sizeof(struct sockaddr_ax25) && fsa->fsa_ax25.sax25_ndigis != 0) { /* Valid number of digipeaters ? */ - if (fsa->fsa_ax25.sax25_ndigis < 1 || fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS) { + if (fsa->fsa_ax25.sax25_ndigis < 1 || + addr_len < sizeof(struct sockaddr_ax25) + + sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) { err = -EINVAL; goto out_release; }
From: Peilin Ye yepeilin.cs@gmail.com
[ Upstream commit 8885bb0621f01a6c82be60a91e5fc0f6e2f71186 ]
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient. ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7 or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye yepeilin.cs@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ax25/af_ax25.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1509,7 +1509,8 @@ static int ax25_sendmsg(struct socket *s struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
/* Valid number of digipeaters ? */ - if (usax->sax25_ndigis < 1 || usax->sax25_ndigis > AX25_MAX_DIGIS) { + if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) + + sizeof(ax25_address) * usax->sax25_ndigis) { err = -EINVAL; goto out; }
From: Subash Abhinov Kasiviswanathan subashab@codeaurora.org
[ Upstream commit 7df5cb75cfb8acf96c7f2342530eb41e0c11f4c3 ]
IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan subashab@codeaurora.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/dev.c +++ b/net/core/dev.c @@ -5229,7 +5229,7 @@ static void flush_backlog(struct work_st skb_queue_walk_safe(&sd->input_pkt_queue, skb, tmp) { if (skb->dev->reg_state == NETREG_UNREGISTERING) { __skb_unlink(skb, &sd->input_pkt_queue); - kfree_skb(skb); + dev_kfree_skb_irq(skb); input_queue_head_incr(sd); } }
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ]
This driver is not working because of problems of its receiving code. This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet edumazet@google.com Cc: Martin Schiller ms@dev.tdt.de Signed-off-by: Xie He xie.he.0141@gmail.com Reviewed-by: Martin Schiller ms@dev.tdt.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wan/x25_asy.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -183,7 +183,7 @@ static inline void x25_asy_unlock(struct netif_wake_queue(sl->dev); }
-/* Send one completely decapsulated IP datagram to the IP layer. */ +/* Send an LAPB frame to the LAPB module to process. */
static void x25_asy_bump(struct x25_asy *sl) { @@ -195,13 +195,12 @@ static void x25_asy_bump(struct x25_asy count = sl->rcount; dev->stats.rx_bytes += count;
- skb = dev_alloc_skb(count+1); + skb = dev_alloc_skb(count); if (skb == NULL) { netdev_warn(sl->dev, "memory squeeze, dropping packet\n"); dev->stats.rx_dropped++; return; } - skb_push(skb, 1); /* LAPB internal control */ skb_put_data(skb, sl->rbuff, count); skb->protocol = x25_type_trans(skb, sl->dev); err = lapb_data_received(skb->dev, skb); @@ -209,7 +208,6 @@ static void x25_asy_bump(struct x25_asy kfree_skb(skb); printk(KERN_DEBUG "x25_asy: data received err - %d\n", err); } else { - netif_rx(skb); dev->stats.rx_packets++; } } @@ -356,12 +354,21 @@ static netdev_tx_t x25_asy_xmit(struct s */
/* - * Called when I frame data arrives. We did the work above - throw it - * at the net layer. + * Called when I frame data arrive. We add a pseudo header for upper + * layers and pass it to upper layers. */
static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb) { + if (skb_cow(skb, 1)) { + kfree_skb(skb); + return NET_RX_DROP; + } + skb_push(skb, 1); + skb->data[0] = X25_IFACE_DATA; + + skb->protocol = x25_type_trans(skb, dev); + return netif_rx(skb); }
@@ -657,7 +664,7 @@ static void x25_asy_unesc(struct x25_asy switch (s) { case X25_END: if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && - sl->rcount > 2) + sl->rcount >= 2) x25_asy_bump(sl); clear_bit(SLF_ESCAPE, &sl->flags); sl->rcount = 0;
From: Wei Yongjun weiyongjun1@huawei.com
[ Upstream commit 46ef5b89ec0ecf290d74c4aee844f063933c4da4 ]
KASAN report null-ptr-deref error when register_netdev() failed:
KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7] CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12 Call Trace: ip6gre_init_net+0x4ab/0x580 ? ip6gre_tunnel_uninit+0x3f0/0x3f0 ops_init+0xa8/0x3c0 setup_net+0x2de/0x7e0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? ops_init+0x3c0/0x3c0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 copy_net_ns+0x27d/0x530 create_new_namespaces+0x382/0xa30 unshare_nsproxy_namespaces+0xa1/0x1d0 ksys_unshare+0x39c/0x780 ? walk_process_tree+0x2a0/0x2a0 ? trace_hardirqs_on+0x4a/0x1b0 ? _raw_spin_unlock_irq+0x1f/0x30 ? syscall_trace_enter+0x1a7/0x330 ? do_syscall_64+0x1c/0xa0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x56/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9
ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving 'ign->fb_tunnel_dev' to local variable ndev.
Fixes: dafabb6590cb ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/ip6_gre.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
--- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1560,17 +1560,18 @@ static void ip6gre_destroy_tunnels(struc static int __net_init ip6gre_init_net(struct net *net) { struct ip6gre_net *ign = net_generic(net, ip6gre_net_id); + struct net_device *ndev; int err;
if (!net_has_fallback_tunnels(net)) return 0; - ign->fb_tunnel_dev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0", - NET_NAME_UNKNOWN, - ip6gre_tunnel_setup); - if (!ign->fb_tunnel_dev) { + ndev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0", + NET_NAME_UNKNOWN, ip6gre_tunnel_setup); + if (!ndev) { err = -ENOMEM; goto err_alloc_dev; } + ign->fb_tunnel_dev = ndev; dev_net_set(ign->fb_tunnel_dev, net); /* FB netdevice is special: we have one, and only one per netns. * Allowing to move it to another netns is clearly unsafe. @@ -1590,7 +1591,7 @@ static int __net_init ip6gre_init_net(st return 0;
err_reg_dev: - free_netdev(ign->fb_tunnel_dev); + free_netdev(ndev); err_alloc_dev: return err; }
From: Xiongfeng Wang wangxiongfeng2@huawei.com
[ Upstream commit 9bb5fbea59f36a589ef886292549ca4052fe676c ]
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout 0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang wangxiongfeng2@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/net-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -1036,7 +1036,7 @@ static ssize_t tx_timeout_show(struct ne trans_timeout = queue->trans_timeout; spin_unlock_irq(&queue->_xmit_lock);
- return sprintf(buf, "%lu", trans_timeout); + return sprintf(buf, fmt_ulong, trans_timeout); }
static unsigned int get_netdev_queue_index(struct netdev_queue *queue)
From: Miaohe Lin linmiaohe@huawei.com
[ Upstream commit b0a422772fec29811e293c7c0e6f991c0fd9241d ]
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is checked.
Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro") Signed-off-by: Miaohe Lin linmiaohe@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/udp.c | 2 +- net/ipv6/udp.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2045,7 +2045,7 @@ static int udp_queue_rcv_one_skb(struct /* * UDP-Lite specific tests, ignored on UDP sockets */ - if ((is_udplite & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) { + if ((up->pcflag & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) {
/* * MIB statistics other than incrementing the error count are --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -643,7 +643,7 @@ static int udpv6_queue_rcv_one_skb(struc /* * UDP-Lite specific tests, ignored on UDP sockets (see net/ipv4/udp.c). */ - if ((is_udplite & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) { + if ((up->pcflag & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) {
if (up->pcrlen == 0) { /* full coverage was set */ net_dbg_ratelimited("UDPLITE6: partial coverage %d while full coverage %d requested\n",
From: Cong Wang xiyou.wangcong@gmail.com
[ Upstream commit af9f691f0f5bdd1ade65a7b84927639882d7c3e5 ]
We have to detach sock from socket in qrtr_release(), otherwise skb->sk may still reference to this socket when the skb is released in tun->queue, particularly sk->sk_wq still points to &sock->wq, which leads to a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson bjorn.andersson@linaro.org Cc: Eric Dumazet eric.dumazet@gmail.com Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/qrtr/qrtr.c | 1 + 1 file changed, 1 insertion(+)
--- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -1004,6 +1004,7 @@ static int qrtr_release(struct socket *s sk->sk_state_change(sk);
sock_set_flag(sk, SOCK_DEAD); + sock_orphan(sk); sock->sk = NULL;
if (!sock_flag(sk, SOCK_ZAPPED))
From: Weilong Chen chenweilong@huawei.com
[ Upstream commit cebb69754f37d68e1355a5e726fdac317bcda302 ]
When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED.
BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Weilong Chen chenweilong@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/rtnetlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -3231,7 +3231,8 @@ replay: */ if (err < 0) { /* If device is not registered at all, free it now */ - if (dev->reg_state == NETREG_UNINITIALIZED) + if (dev->reg_state == NETREG_UNINITIALIZED || + dev->reg_state == NETREG_UNREGISTERED) free_netdev(dev); goto out; }
From: David Howells dhowells@redhat.com
[ Upstream commit 639f181f0ee20d3249dbc55f740f0167267180f0 ]
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.
Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core.
Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by).
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/rxrpc/recvmsg.c | 2 +- net/rxrpc/sendmsg.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/rxrpc/recvmsg.c +++ b/net/rxrpc/recvmsg.c @@ -464,7 +464,7 @@ try_again: list_empty(&rx->recvmsg_q) && rx->sk.sk_state != RXRPC_SERVER_LISTENING) { release_sock(&rx->sk); - return -ENODATA; + return -EAGAIN; }
if (list_empty(&rx->recvmsg_q)) { --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -306,7 +306,7 @@ static int rxrpc_send_data(struct rxrpc_ /* this should be in poll */ sk_clear_bit(SOCKWQ_ASYNC_NOSPACE, sk);
- if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN)) + if (sk->sk_shutdown & SEND_SHUTDOWN) return -EPIPE;
more = msg->msg_flags & MSG_MORE;
From: Yuchung Cheng ycheng@google.com
[ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ]
Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight.
Note that if the sender is app-limited, TLP retransmits old data and did not have this issue.
Signed-off-by: Yuchung Cheng ycheng@google.com Signed-off-by: Neal Cardwell ncardwell@google.com Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/tcp.h | 4 +++- net/ipv4/tcp_input.c | 11 ++++++----- net/ipv4/tcp_output.c | 13 ++++++++----- 3 files changed, 17 insertions(+), 11 deletions(-)
--- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -216,6 +216,8 @@ struct tcp_sock { } rack; u16 advmss; /* Advertised MSS */ u8 compressed_ack; + u8 tlp_retrans:1, /* TLP is a retransmission */ + unused_1:7; u32 chrono_start; /* Start time in jiffies of a TCP chrono */ u32 chrono_stat[3]; /* Time in jiffies for chrono_stat stats */ u8 chrono_type:2, /* current chronograph type */ @@ -238,7 +240,7 @@ struct tcp_sock { save_syn:1, /* Save headers of SYN packet */ is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */ syn_smc:1; /* SYN includes SMC */ - u32 tlp_high_seq; /* snd_nxt at the time of TLP retransmit. */ + u32 tlp_high_seq; /* snd_nxt at the time of TLP */
u32 tcp_tx_delay; /* delay (in usec) added to TX packets */ u64 tcp_wstamp_ns; /* departure time for next sent data packet */ --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3505,10 +3505,8 @@ static void tcp_replace_ts_recent(struct } }
-/* This routine deals with acks during a TLP episode. - * We mark the end of a TLP episode on receiving TLP dupack or when - * ack is after tlp_high_seq. - * Ref: loss detection algorithm in draft-dukkipati-tcpm-tcp-loss-probe. +/* This routine deals with acks during a TLP episode and ends an episode by + * resetting tlp_high_seq. Ref: TLP algorithm in draft-ietf-tcpm-rack */ static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag) { @@ -3517,7 +3515,10 @@ static void tcp_process_tlp_ack(struct s if (before(ack, tp->tlp_high_seq)) return;
- if (flag & FLAG_DSACKING_ACK) { + if (!tp->tlp_retrans) { + /* TLP of new data has been acknowledged */ + tp->tlp_high_seq = 0; + } else if (flag & FLAG_DSACKING_ACK) { /* This DSACK means original and TLP probe arrived; no loss */ tp->tlp_high_seq = 0; } else if (after(ack, tp->tlp_high_seq)) { --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2564,6 +2564,11 @@ void tcp_send_loss_probe(struct sock *sk int pcount; int mss = tcp_current_mss(sk);
+ /* At most one outstanding TLP */ + if (tp->tlp_high_seq) + goto rearm_timer; + + tp->tlp_retrans = 0; skb = tcp_send_head(sk); if (skb && tcp_snd_wnd_test(tp, skb, mss)) { pcount = tp->packets_out; @@ -2581,10 +2586,6 @@ void tcp_send_loss_probe(struct sock *sk return; }
- /* At most one outstanding TLP retransmission. */ - if (tp->tlp_high_seq) - goto rearm_timer; - if (skb_still_in_host_queue(sk, skb)) goto rearm_timer;
@@ -2606,10 +2607,12 @@ void tcp_send_loss_probe(struct sock *sk if (__tcp_retransmit_skb(sk, skb, 1)) goto rearm_timer;
+ tp->tlp_retrans = 1; + +probe_sent: /* Record snd_nxt for loss detection. */ tp->tlp_high_seq = tp->snd_nxt;
-probe_sent: NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPLOSSPROBES); /* Reset s.t. tcp_rearm_rto will restart timer from now */ inet_csk(sk)->icsk_pending = 0;
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 17ad73e941b71f3bec7523ea4e9cbc3752461c2d ]
We recently added some bounds checking in ax25_connect() and ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows so I have added them back.
Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ax25/af_ax25.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -1188,6 +1188,7 @@ static int __must_check ax25_connect(str fsa->fsa_ax25.sax25_ndigis != 0) { /* Valid number of digipeaters ? */ if (fsa->fsa_ax25.sax25_ndigis < 1 || + fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS || addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) { err = -EINVAL; @@ -1509,7 +1510,9 @@ static int ax25_sendmsg(struct socket *s struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
/* Valid number of digipeaters ? */ - if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) + + if (usax->sax25_ndigis < 1 || + usax->sax25_ndigis > AX25_MAX_DIGIS || + addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * usax->sax25_ndigis) { err = -EINVAL; goto out;
From: Xin Long lucien.xin@gmail.com
[ Upstream commit 8f13399db22f909a35735bf8ae2f932e0c8f0e30 ]
It's not necessary to go list_for_each for outq->out_chunk_list when new outcnt >= old outcnt, as no chunk with higher sid than new (outcnt - 1) exists in the outqueue.
While at it, also move the list_for_each code in a new function sctp_stream_shrink_out(), which will be used in the next patch.
Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sctp/stream.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
--- a/net/sctp/stream.c +++ b/net/sctp/stream.c @@ -22,17 +22,11 @@ #include <net/sctp/sm.h> #include <net/sctp/stream_sched.h>
-/* Migrates chunks from stream queues to new stream queues if needed, - * but not across associations. Also, removes those chunks to streams - * higher than the new max. - */ -static void sctp_stream_outq_migrate(struct sctp_stream *stream, - struct sctp_stream *new, __u16 outcnt) +static void sctp_stream_shrink_out(struct sctp_stream *stream, __u16 outcnt) { struct sctp_association *asoc; struct sctp_chunk *ch, *temp; struct sctp_outq *outq; - int i;
asoc = container_of(stream, struct sctp_association, stream); outq = &asoc->outqueue; @@ -56,6 +50,19 @@ static void sctp_stream_outq_migrate(str
sctp_chunk_free(ch); } +} + +/* Migrates chunks from stream queues to new stream queues if needed, + * but not across associations. Also, removes those chunks to streams + * higher than the new max. + */ +static void sctp_stream_outq_migrate(struct sctp_stream *stream, + struct sctp_stream *new, __u16 outcnt) +{ + int i; + + if (stream->outcnt > outcnt) + sctp_stream_shrink_out(stream, outcnt);
if (new) { /* Here we actually move the old ext stuff into the new
From: Xin Long lucien.xin@gmail.com
[ Upstream commit 3ecdda3e9ad837cf9cb41b6faa11b1af3a5abc0c ]
When adding a stream with stream reconf, the new stream firstly is in CLOSED state but new out chunks can still be enqueued. Then once gets the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when doing that, it only sets the stream outcnt back, and the chunks already in the new stream don't get purged. It caused these chunks can still be dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head again by sctp_outq_head_data(). This chunk will never be sent out, and the chunks after it can never be dequeued. The assoc will be 'hung' in a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new stream by calling sctp_stream_shrink_out() when failing to do the addstream reconf.
Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu yinxu@redhat.com Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sctp/stream.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/sctp/stream.c +++ b/net/sctp/stream.c @@ -1045,11 +1045,13 @@ struct sctp_chunk *sctp_process_strreset nums = ntohs(addstrm->number_of_streams); number = stream->outcnt - nums;
- if (result == SCTP_STRRESET_PERFORMED) + if (result == SCTP_STRRESET_PERFORMED) { for (i = number; i < stream->outcnt; i++) SCTP_SO(stream, i)->state = SCTP_STREAM_OPEN; - else + } else { + sctp_stream_shrink_out(stream, number); stream->outcnt = number; + }
*evp = sctp_ulpevent_make_stream_change_event(asoc, flags, 0, nums, GFP_ATOMIC);
From: Kuniyuki Iwashima kuniyu@amazon.co.jp
[ Upstream commit f2b2c55e512879a05456eaf5de4d1ed2f7757509 ]
If an unconnected socket in a UDP reuseport group connect()s, has_conns is set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all sockets in udp_hslot looking for the connected socket with the highest score.
However, when the number of sockets bound to the port exceeds max_socks, reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2() to return without scanning all sockets, resulting in that packets sent to connected sockets may be distributed to unconnected sockets.
Therefore, reuseport_grow() should copy has_conns.
Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn willemb@google.com Reviewed-by: Benjamin Herrenschmidt benh@amazon.com Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.co.jp Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/sock_reuseport.c | 1 + 1 file changed, 1 insertion(+)
--- a/net/core/sock_reuseport.c +++ b/net/core/sock_reuseport.c @@ -112,6 +112,7 @@ static struct sock_reuseport *reuseport_ more_reuse->prog = reuse->prog; more_reuse->reuseport_id = reuse->reuseport_id; more_reuse->bind_inany = reuse->bind_inany; + more_reuse->has_conns = reuse->has_conns;
memcpy(more_reuse->socks, reuse->socks, reuse->num_socks * sizeof(struct sock *));
From: Kuniyuki Iwashima kuniyu@amazon.co.jp
[ Upstream commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace ]
Currently, SO_REUSEPORT does not work well if connected sockets are in a UDP reuseport group.
Then reuseport_has_conns() returns true and the result of reuseport_select_sock() is discarded. Also, unconnected sockets have the same score, hence only does the first unconnected socket in udp_hslot always receive all packets sent to unconnected sockets.
So, the result of reuseport_select_sock() should be used for load balancing.
The noteworthy point is that the unconnected sockets placed after connected sockets in sock_reuseport.socks will receive more packets than others because of the algorithm in reuseport_select_sock().
index | connected | reciprocal_scale | result --------------------------------------------- 0 | no | 20% | 40% 1 | no | 20% | 20% 2 | yes | 20% | 0% 3 | no | 20% | 40% 4 | yes | 20% | 0%
If most of the sockets are connected, this can be a problem, but it still works better than now.
Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn willemb@google.com Reviewed-by: Benjamin Herrenschmidt benh@amazon.com Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.co.jp Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/udp.c | 15 +++++++++------ net/ipv6/udp.c | 15 +++++++++------ 2 files changed, 18 insertions(+), 12 deletions(-)
--- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -413,7 +413,7 @@ static struct sock *udp4_lib_lookup2(str struct udp_hslot *hslot2, struct sk_buff *skb) { - struct sock *sk, *result; + struct sock *sk, *result, *reuseport_result; int score, badness; u32 hash = 0;
@@ -423,17 +423,20 @@ static struct sock *udp4_lib_lookup2(str score = compute_score(sk, net, saddr, sport, daddr, hnum, dif, sdif); if (score > badness) { + reuseport_result = NULL; + if (sk->sk_reuseport && sk->sk_state != TCP_ESTABLISHED) { hash = udp_ehashfn(net, daddr, hnum, saddr, sport); - result = reuseport_select_sock(sk, hash, skb, - sizeof(struct udphdr)); - if (result && !reuseport_has_conns(sk, false)) - return result; + reuseport_result = reuseport_select_sock(sk, hash, skb, + sizeof(struct udphdr)); + if (reuseport_result && !reuseport_has_conns(sk, false)) + return reuseport_result; } + + result = reuseport_result ? : sk; badness = score; - result = sk; } } return result; --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -148,7 +148,7 @@ static struct sock *udp6_lib_lookup2(str int dif, int sdif, struct udp_hslot *hslot2, struct sk_buff *skb) { - struct sock *sk, *result; + struct sock *sk, *result, *reuseport_result; int score, badness; u32 hash = 0;
@@ -158,17 +158,20 @@ static struct sock *udp6_lib_lookup2(str score = compute_score(sk, net, saddr, sport, daddr, hnum, dif, sdif); if (score > badness) { + reuseport_result = NULL; + if (sk->sk_reuseport && sk->sk_state != TCP_ESTABLISHED) { hash = udp6_ehashfn(net, daddr, hnum, saddr, sport);
- result = reuseport_select_sock(sk, hash, skb, - sizeof(struct udphdr)); - if (result && !reuseport_has_conns(sk, false)) - return result; + reuseport_result = reuseport_select_sock(sk, hash, skb, + sizeof(struct udphdr)); + if (reuseport_result && !reuseport_has_conns(sk, false)) + return reuseport_result; } - result = sk; + + result = reuseport_result ? : sk; badness = score; } }
From: Peng Fan peng.fan@nxp.com
commit 74edd08a4fbf51d65fd8f4c7d8289cd0f392bd91 upstream.
When executing the following command, we met kernel dump. dmesg -c > /dev/null; cd /sys; for i in `ls /sys/kernel/debug/regmap/* -d`; do echo "Checking regmap in $i"; cat $i/registers; done && grep -ri "0x02d0" *;
It is because the count value is too big, and kmalloc fails. So add an upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.
Signed-off-by: Peng Fan peng.fan@nxp.com Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/base/regmap/regmap-debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -227,6 +227,9 @@ static ssize_t regmap_read_debugfs(struc if (*ppos < 0 || !count) return -EINVAL;
+ if (count > (PAGE_SIZE << (MAX_ORDER - 1))) + count = PAGE_SIZE << (MAX_ORDER - 1); + buf = kmalloc(count, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -371,6 +374,9 @@ static ssize_t regmap_reg_ranges_read_fi if (*ppos < 0 || !count) return -EINVAL;
+ if (count > (PAGE_SIZE << (MAX_ORDER - 1))) + count = PAGE_SIZE << (MAX_ORDER - 1); + buf = kmalloc(count, GFP_KERNEL); if (!buf) return -ENOMEM;
From: zhuguangqing zhuguangqing@xiaomi.com
commit e976eb4b91e906f20ec25b20c152d53c472fc3fd upstream.
After commit 00ee22c28915 (PM / wakeup: Use seq_open() to show wakeup stats), print_wakeup_source_stats(m, &deleted_ws) is not called from wakeup_sources_stats_seq_show() any more.
Because deleted_ws is one of the wakeup sources, it should be shown too, so add it to the end of all other wakeup sources.
Signed-off-by: zhuguangqing zhuguangqing@xiaomi.com [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/base/power/wakeup.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -1073,6 +1073,9 @@ static void *wakeup_sources_stats_seq_ne break; }
+ if (!next_ws) + print_wakeup_source_stats(m, &deleted_ws); + return next_ws; }
From: Vladimir Oltean vladimir.oltean@nxp.com
This reverts commit 40a904b1c2e57b22dd002dfce73688871cb0bac8.
The patch is not wrong, but the Fixes: tag is. It should have been:
Fixes: 060ad66f9795 ("dpaa_eth: change DMA device")
which means that it's fixing a commit which was introduced in:
git tag --contains 060ad66f97954 v5.5
which then means it should have not been backported to linux-5.4.y, where things _were_ working and now they're not.
Reported-by: Joakim Tjernlund joakim.tjernlund@infinera.com Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Changes in v1: Adjusted the commit message from linux-4.19.y to linux-5.4.y
Changes in v2: Fixed the sha1sum of the reverted commit.
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2802,7 +2802,7 @@ static int dpaa_eth_probe(struct platfor }
/* Do this here, so we can be verbose early */ - SET_NETDEV_DEV(net_dev, dev->parent); + SET_NETDEV_DEV(net_dev, dev); dev_set_drvdata(dev, net_dev);
priv = netdev_priv(net_dev);
On Thu, Jul 30, 2020 at 10:04:02AM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.4.55 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000. Anything received after that time might be too late.
Build results: total: 157 pass: 157 fail: 0 Qemu test results: total: 429 pass: 429 fail: 0
Guenter
On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.4.55 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 Juno-r2 device running LTP controllers-tests
CONFIG_ARM64_64K_PAGES=y
Unable to handle kernel paging request at virtual address dead000000000108 [dead000000000108] address between user and kernel address ranges Internal error: Oops: 96000044 [#1] PREEMPT SMP
pc : get_page_from_freelist+0xa64/0x1030 lr : get_page_from_freelist+0x9c4/0x1030
We are trying to reproduce this kernel panic and trying to narrow down to specific test cases.
Summary ------------------------------------------------------------------------
kernel: 5.4.55-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-5.4.y git commit: 6666ca784e9e47288180a15935061d88debc9e4b git describe: v5.4.54-20-g6666ca784e9e Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.54-20-g...
arm64 kernel config and details: config: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/kernel.config vmlinux: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/vmlinux.xz System.map: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/System.map
steps to reproduce: - boot juno-r2 with 64k page size config - run ltp controllers # cd /opt/ltp # ./runltp -f controllers
memcg_process: shmget() failed: Invalid argument [ 248.372285] Unable to handle kernel paging request at virtual address dead000000000108 [ 248.380223] Mem abort info: [ 248.383015] ESR = 0x96000044 [ 248.386071] EC = 0x25: DABT (current EL), IL = 32 bits [ 248.391387] SET = 0, FnV = 0 [ 248.394440] EA = 0, S1PTW = 0 [ 248.397580] Data abort info: [ 248.400460] ISV = 0, ISS = 0x00000044 [ 248.404296] CM = 0, WnR = 1 [ 248.407264] [dead000000000108] address between user and kernel address ranges [ 248.414410] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 248.419989] Modules linked in: tda998x drm_kms_helper drm crct10dif_ce fuse [ 248.426975] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.55-rc1 #1 [ 248.433249] Hardware name: ARM Juno development board (r2) (DT) [ 248.439178] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 248.443984] pc : get_page_from_freelist+0xa64/0x1030 [ 248.448955] lr : get_page_from_freelist+0x9c4/0x1030 [ 248.453923] sp : ffff80001000fbb0 [ 248.457238] x29: ffff80001000fbb0 x28: ffff00097fdbfe48 [ 248.462557] x27: 0000000000000010 x26: 0000000000000000 [ 248.467877] x25: ffff00097feabdc0 x24: 0000000000000000 [ 248.473196] x23: 0000000000000000 x22: 0000000000000000 [ 248.478515] x21: 0000fff680154180 x20: ffff00097fdbfe38 [ 248.483835] x19: 0000000000000000 x18: 0000000000000000 [ 248.489154] x17: 0000000000000000 x16: 0000000000000000 [ 248.494473] x15: 0000000000000000 x14: 0000000000000000 [ 248.499792] x13: 0000000000000000 x12: 0000000034d4d91d [ 248.505111] x11: 0000000000000000 x10: 0000000000000000 [ 248.510430] x9 : ffff80096e790000 x8 : ffffffffffffff40 [ 248.515749] x7 : 0000000000000000 x6 : ffffffe002308b48 [ 248.521068] x5 : ffff00097fdbfe38 x4 : dead000000000100 [ 248.526387] x3 : 0000000000000000 x2 : 0000000000000000 [ 248.531706] x1 : 0000000000000000 x0 : ffffffe002308b40 [ 248.537026] Call trace: [ 248.539475] get_page_from_freelist+0xa64/0x1030 [ 248.544099] __alloc_pages_nodemask+0x144/0x280 [ 248.548635] page_frag_alloc+0x70/0x140 [ 248.552479] __netdev_alloc_skb+0x158/0x188 [ 248.556667] smsc911x_poll+0x90/0x268 [ 248.560342] net_rx_action+0x114/0x340 [ 248.564096] __do_softirq+0x120/0x25c [ 248.567766] irq_exit+0xb8/0xd8 [ 248.570910] __handle_domain_irq+0x64/0xb8 [ 248.575010] gic_handle_irq+0x50/0xa8 [ 248.578675] el1_irq+0xb8/0x180 [ 248.581820] tick_check_broadcast_expired+0x34/0x40 [ 248.586705] do_idle+0x8c/0x280 [ 248.589848] cpu_startup_entry+0x20/0x80 [ 248.593777] rest_init+0xd4/0xe0 [ 248.597010] arch_call_rest_init+0xc/0x14 [ 248.601024] start_kernel+0x418/0x44c [ 248.604693] Code: 54000a00 f10020c0 540009c0 a9400cc4 (f9000483) [ 248.610803] ---[ end trace 358f513e280e4dfd ]--- [ 248.615426] Kernel panic - not syncing: Fatal exception in interrupt [ 248.621789] SMP: stopping secondary CPUs [ 249.740564] SMP: failed to stop secondary CPUs 0-2 [ 249.745359] Kernel Offset: disabled [ 249.748849] CPU features: 0x0002,24006000 [ 249.752859] Memory Limit: none [ 249.755921] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
-- Linaro LKFT https://lkft.linaro.org
On Fri, Jul 31, 2020 at 12:32 PM Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.4.55 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 Juno-r2 device running LTP controllers-tests
CONFIG_ARM64_64K_PAGES=y
Unable to handle kernel paging request at virtual address dead000000000108
This is LIST_POISON1+8, so something was following a list_head that got deleted from a list.
[dead000000000108] address between user and kernel address ranges Internal error: Oops: 96000044 [#1] PREEMPT SMP
pc : get_page_from_freelist+0xa64/0x1030 lr : get_page_from_freelist+0x9c4/0x1030
We are trying to reproduce this kernel panic and trying to narrow down to specific test cases.
Summary
kernel: 5.4.55-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-5.4.y git commit: 6666ca784e9e47288180a15935061d88debc9e4b git describe: v5.4.54-20-g6666ca784e9e Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.54-20-g...
arm64 kernel config and details: config: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/kernel.config vmlinux: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/vmlinux.xz System.map: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/System.map
steps to reproduce:
- boot juno-r2 with 64k page size config
- run ltp controllers # cd /opt/ltp # ./runltp -f controllers
memcg_process: shmget() failed: Invalid argument [ 248.372285] Unable to handle kernel paging request at virtual address dead000000000108 [ 248.380223] Mem abort info: [ 248.383015] ESR = 0x96000044 [ 248.386071] EC = 0x25: DABT (current EL), IL = 32 bits [ 248.391387] SET = 0, FnV = 0 [ 248.394440] EA = 0, S1PTW = 0 [ 248.397580] Data abort info: [ 248.400460] ISV = 0, ISS = 0x00000044 [ 248.404296] CM = 0, WnR = 1 [ 248.407264] [dead000000000108] address between user and kernel address ranges [ 248.414410] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 248.419989] Modules linked in: tda998x drm_kms_helper drm crct10dif_ce fuse [ 248.426975] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.55-rc1 #1 [ 248.433249] Hardware name: ARM Juno development board (r2) (DT) [ 248.439178] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 248.443984] pc : get_page_from_freelist+0xa64/0x1030 [ 248.448955] lr : get_page_from_freelist+0x9c4/0x1030
The function is a little too long for me to see immediately which list this is. Using addr2line should help.
[ 248.453923] sp : ffff80001000fbb0 [ 248.457238] x29: ffff80001000fbb0 x28: ffff00097fdbfe48 [ 248.462557] x27: 0000000000000010 x26: 0000000000000000 [ 248.467877] x25: ffff00097feabdc0 x24: 0000000000000000 [ 248.473196] x23: 0000000000000000 x22: 0000000000000000 [ 248.478515] x21: 0000fff680154180 x20: ffff00097fdbfe38 [ 248.483835] x19: 0000000000000000 x18: 0000000000000000 [ 248.489154] x17: 0000000000000000 x16: 0000000000000000 [ 248.494473] x15: 0000000000000000 x14: 0000000000000000 [ 248.499792] x13: 0000000000000000 x12: 0000000034d4d91d [ 248.505111] x11: 0000000000000000 x10: 0000000000000000 [ 248.510430] x9 : ffff80096e790000 x8 : ffffffffffffff40 [ 248.515749] x7 : 0000000000000000 x6 : ffffffe002308b48 [ 248.521068] x5 : ffff00097fdbfe38 x4 : dead000000000100 [ 248.526387] x3 : 0000000000000000 x2 : 0000000000000000 [ 248.531706] x1 : 0000000000000000 x0 : ffffffe002308b40 [ 248.537026] Call trace: [ 248.539475] get_page_from_freelist+0xa64/0x1030 [ 248.544099] __alloc_pages_nodemask+0x144/0x280 [ 248.548635] page_frag_alloc+0x70/0x140 [ 248.552479] __netdev_alloc_skb+0x158/0x188 [ 248.556667] smsc911x_poll+0x90/0x268
This looks like a regular memory allocation, one common thing that may have gone wrong here would be an earlier double-free.
There are not a lot of commits in v5.4.55-rc1, and most of these are surely unrelated:
6666ca784e9e (HEAD, stable-rc/linux-5.4.y) Linux 5.4.55-rc1 ee4984bf5748 Revert "dpaa_eth: fix usage as DSA master, try 3" 783efa432aa4 PM: wakeup: Show statistics for deleted wakeup sources again 967783c61b31 regmap: debugfs: check count when read regmap file 3999cdbf89f0 drivers/net/wan/x25_asy: Fix to make it work eb8b6691d757 AX.25: Prevent integer overflows in connect and sendmsg 3c3ae3e4c529 AX.25: Prevent out-of-bounds read in ax25_sendmsg() e9380b1e9f82 AX.25: Fix out-of-bounds read in ax25_connect() 71e00f341e74 rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA a385dfd083fb ip6_gre: fix null-ptr-deref in ip6gre_init_net() 161727c98eb6 net-sysfs: add a newline when printing 'tx_timeout' by sysfs a93155189546 qrtr: orphan socket in qrtr_release()
I don't think any of the above are in use on your machine.
1365360e789d udp: Improve load balancing for SO_REUSEPORT. efb2848c55b3 udp: Copy has_conns in reuseport_grow(). 829a46fae4fd sctp: shrink stream outq when fails to do addstream reconf a4842355118b sctp: shrink stream outq only when new outcnt < old outcnt e99e79382d46 tcp: allow at most one TLP probe per flight 66007a7d7f4b net: udp: Fix wrong clean up for IS_UDPLITE macro
These seem possible but unlikely to be the culprit
8508b3ca8595 rtnetlink: Fix memory(net_device) leak when ->newlink fails c1efeaaebc74 dev: Defer free of skbs in flush_backlog
These both deal with memory allocation in some form, I would try reverting the last one first.
Arnd
On Fri, Jul 31, 2020 at 04:02:16PM +0530, Naresh Kamboju wrote:
On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.4.55 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. Regressions on arm64 Juno-r2 device running LTP controllers-tests
CONFIG_ARM64_64K_PAGES=y
Unable to handle kernel paging request at virtual address dead000000000108 [dead000000000108] address between user and kernel address ranges Internal error: Oops: 96000044 [#1] PREEMPT SMP
pc : get_page_from_freelist+0xa64/0x1030 lr : get_page_from_freelist+0x9c4/0x1030
We are trying to reproduce this kernel panic and trying to narrow down to specific test cases.
If you come up with something that needs to be reverted, please let me know.
Otherwise, thanks for testing all of these.
greg k-h
On Thu, 30 Jul 2020 10:04:02 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.4.55 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.4: 11 builds: 11 pass, 0 fail 26 boots: 26 pass, 0 fail 56 tests: 56 pass, 0 fail
Linux version: 5.4.55-rc1-g6666ca784e9e Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Jon
linux-stable-mirror@lists.linaro.org