Fix the current check for number of channels (child nodes in the device tree). Before, this was:

if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)

RTL9300_I2C_MUX_NCHAN gives the maximum number of channels so checking with '>=' isn't correct because it doesn't allow the last channel number. Thus, fix it to:

if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)

Issue occured on a TP-Link TL-ST1008F v2.0 device (8 SFP+ ports) and fix is tested there.

Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller") Cc: stable@vger.kernel.org # v6.13+ Signed-off-by: Jonas Jelonek jelonek.jonas@gmail.com Tested-by: Sven Eckelmann sven@narfation.org --- drivers/i2c/busses/i2c-rtl9300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c index 4b215f9a24e6..19c367703eaf 100644 --- a/drivers/i2c/busses/i2c-rtl9300.c +++ b/drivers/i2c/busses/i2c-rtl9300.c @@ -382,7 +382,7 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, i2c);

- if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN) + if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN) return dev_err_probe(dev, -EINVAL, "Too many channels\n");

device_for_each_child_node(dev, child) {