I searched through https://github.com/Xilinx/linux-xlnx/tree/xlnx_rebase_v4.9 for commits that got backported from mainline, and categorized them to see if we want them in an LTS kernel.
Most of the contents are specific to xilinx hardware, but some changes are for generic drivers.
These commits look like we should have them in the LTS kernel, and they apply cleanly:
d86c5a676e5b ("usb: dwc3: gadget: always try to prepare on started_list first") 63b7c83ebea0 ("microblaze: Fix return value from xilinx_timer_init") 7181e5590e5b ("microblaze: Add missing syscalls") 8ee80500ad78 ("microblaze: Add missing release version code v9.6 and v10") 3400606d8ffd ("microblaze: Add new fpga families") 26b54be568ad ("PCI: xilinx-nwl: Remove mask for messages not supported by AXI") acf6ef1d6c96 ("i2c: mux: pca954x: Export OF device ID table as module aliases") dbe4d69d252e ("i2c: mux: pca954x: Add missing pca9546 definition to chip_desc") 360a3a90c626 ("[media] uvcvideo: Fix empty packet statistic") a753499d4360 ("microblaze: mm: Flush TLB to ensure correct mapping when higmem ON") faf154cd49ba ("microblaze: Separate GP registers from MSR handling") 14ef905bb2ee ("microblaze: Fix MSR flags when returning from exception") 8064c616984e ("i2c: cadance: fix ctrl/addr reg write order") 48767fd8982d ("spi: cadence: change sequence of calling runtime_enable") 802740890c42 ("spi: cadence: Add support for context loss") e11de4de28c0 ("gpio: zynq: Add support for suspend resume") a5685781dfe9 ("cpufreq: dt: Add zynqmp to the cpufreq dt platdev") 5c8f124893c4 ("mfd: Kconfig: Add missing Kconfig dependency for TPS65086") d15c56cad0e6 ("arm64: dts: xilinx: fix PCI bus dtc warnings") 17e76f95a4be ("arm64: zynqmp: Add dcc console for zynqmp") 8c50b1e435d1 ("arm64: zynqmp: Add CCI-400 node") e199f2cc1e55 ("arm64: zynqmp: Correct IRQ nr for the SMMU") db202f4d5c24 ("watchdog: cadence_wdt: Enable access to module parameters") 3df3e41c3152 ("video: fbdev: Enable Xilinx FB for ZynqMP") 1d67243a8e77 ("tty: xilinx_uartps: move to arch_initcall for earlier console") 3c48d62de237 ("dmaengine: zynqmp_dma: Fix warning variable 'val' set but not used") 8d90035e379c ("dmaengine: zynqmp_dma: Fix issues with overflow interrupt") 23059408b6a3 ("dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario") 48c62fb051af ("dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma") 4b597c634a2a ("dmaengine: xilinx_dma: Fix warning variable prev set but not used") 1fd4c45d6cd3 ("usb: gadget: udc-xilinx: remove redundant pointer udc")
These look useful, but require a backport to apply:
06aa09081d44 ("gpio: zynq: Provided workaround for GPIO") 6e037fb77086 ("ata: ceva: Correct the AXI bus configuration for SATA ports") f8251f1dfda9 ("i2c: mux: pca954x: Add missing pca9542 definition to chip_desc") 25cd9721c2b1 ("usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held") 51218298a25e ("alarmtimer: Ensure RTC module is not unloaded")
These seem harmless but not necessary for stable backports, they could easily get applied if there is a reason for them:
99c494077e2d ("idr: add ida_is_empty") f59d4418c420 ("[media] media: adv7604: fix bindings inconsistency for default-input") 6ab1a322dcaf ("[media] vivid: Enable 4k resolution for webcam capture device") 10eeb5e645b5 ("net: xilinx: constify net_device_ops structure") e0d4fa5f7a50 ("microblaze: Update defconfigs") 17f4977ccd2b ("microblaze: Enabling CONFIGS related to MTD") e16f1ad442e2 ("microblaze: Enabling CONFIG_BRIDGE in mmu_defconfig") 3638bd4a066c ("gpio: zynq: Clarify quirk and provide helper function") 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") fdc71ce97c13 ("PCI: xilinx: Make of_device_ids const") 011e29e7d93d ("watchdog: cadence_wdt: make of_device_ids const.") ce0d37614083 ("iio: adc: xadc: Fix coding style violations") ef2b56df5a8a ("char: xilinx_hwicap: Fix kernel doc warnings") 4cb4142ba02c ("pinctrl: zynq: Fix kernel doc warnings") 6c2c9bd27cc5 ("pinctrl: zynq: Fix warnings in the driver") 6ae5104cbaa5 ("gpio: zynq: Fix kernel doc warnings") 2717cfcaf564 ("gpio: zynq: Fix warnings in the driver") b09034892210 ("arm: zynq: Add adv7511 on i2c bus for zc70x") e5e6f6872c7a ("arm: zynq: Add device-type property for zynq ethernet phy nodes") 3c220bf42090 ("arm: zynq: Label whole PL part as fpga_full region") 1188c024f216 ("arm: zynq: Use C pre-processor for includes in dts") 21ad06cc9e63 ("arm: zynq: Remove earlycon from bootargs") 26db4d8bc7cb ("arm64: zynqmp: Remove leading 0s from mtd table for spi flashes") 63301178e9a9 ("arm64: zynqmp: Move nodes which have no reg property out of bus") 400e188fa895 ("arm64: zynqmp: Add references to cpu nodes") 1e4e25c8ae8f ("arm64: zynqmp: Add idle state for ZynqMP") e31b7bb8e21e ("arm64: zynqmp: Add operating points") 4a6514d523b5 ("arm64: zynqmp: Adding prefetchable memory space to pcie node") 7fb7820c579b ("arm64: zynqmp: Add support for RTC") 27af3993f77d ("arm64: zynqmp: Add new uartps compatible string") 2f9ed1999a41 ("arm64: zynqmp: Set status disabled in dtsi") 932bd0d8dbe8 ("arm64: zynqmp: Add fpd/lpd dmas") e881e58709a7 ("arm64: zynqmp: Use C pre-processor for includes") 05e0bd10a9ee ("arm64: zynqmp: Added clocks to DT for ep108") 142574873e2b ("arm64: zynqmp: Enable can1 for ep108") 0286f3ea26a4 ("arm64: zynqmp: Add missing mmc aliases in ep108") b6bc41645547 ("watchdog: of_xilinx_wdt: Add support for reading freq via CCF") 6f671c6b6288 ("watchdog: of_xilinx_wdt: Add suspend/resume support") c7a03599b58f ("dmaengine: xilinx_dma: Differentiate probe based on the ip type") 025ba1841e5d ("ARM: dts: zynq: Add mmc alias for zc702/zc706/zed/zybo") e7abd89466df ("arm64: dts: zynqmp: Add DDRC node") c2df3de0d07e ("gpio: zynq: properly support runtime PM for GPIO used as interrupts") d2920ef5d094 ("dt-bindings: spi: Add device tree binding documentation for Zynq QSPI controller") 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
And finally, these were backported into the xilinx tree, but are clearly not material for an lts kernel.
0f57dc6ae1ff ("remoteproc: Keep local copy of firmware name") 2aefbef04149 ("remoteproc: Add a sysfs interface for firmware and state") 2bfc311a57f5 ("remoteproc: Drop wait in __rproc_boot()") dbf499cf720a ("usb: gadget: f_hid add super speed support") 39a842e22c1b ("of/overlay: add of overlay notifications") 9dce0287a60d ("fpga: add method to get fpga manager from device") 40e83578fd1e ("doc: fpga-mgr: add fpga image info to api") a33ddf80b67a ("fpga: add bindings document for fpga region") 1df2865f8dd9 ("fpga-mgr: add fpga image information struct") 12e2508213ac ("add sysfs document for fpga bridge class") 21aeda950c5f ("fpga: add fpga bridge framework") 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA") 1930c2865108 ("fpga zynq: Add missing \n to messages") 80baf649c277 ("fpga zynq: Remove priv->dev") 340c0c53ea30 ("fpga zynq: Fix incorrect ISR state on bootup") 7fe91fccc49f ("ARM: zynq: Remove skeleton.dtsi") da457d57594b ("ARM: zynq: Fix W=1 dtc 1.4 warnings") 5935a2b3a57c ("serial: xuartps: Enable uart loopback mode") 6f05afcbb031 ("scripts/dtc: Update to upstream version 0931cea3ba20") 608d792192d7 ("remoteproc: Add RPROC_DELETED state") 7a20c64ddb3d ("remoteproc: Reduce asynchronous request_firmware to auto-boot only") f2114795f721 ("i2c: mux: pca954x: Add interrupt controller support") ae3696c167cc ("net: macb: fix phy interrupt parsing") 52276df0b1ce ("[media] uvcvideo: Don't record timespec_sub") 89d123106a97 ("scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6") d62100f1aac2 ("serial: xilinx_uartps: Add pm runtime support") 81e33b51ed69 ("serial: xuartps: Cleanup the clock enable") ecfc5771ef06 ("serial: xuartps: Enable clocks in the pm disable case also") d653c43aefed ("serial: xilinx_uartps: Fix the error path") 094094a9373f ("serial: uartps: Fix kernel doc warnings") f3a7f6f67fc7 ("watchdog: cadence_wdt: Show information when driver is probed") 00a0af9a6b04 ("video: fbdev: Fix multiple style issues in xilinxfb") 9053f4b9855c ("devicetree: bindings: Add sata port phy config parameters in ahci-ceva") fe8365bbf8ac ("ata: ceva: Move sata port phy oob settings to device-tree") e8fc8b858cd8 ("ata: ceva: Add gen 3 mode support in driver") ff0d63778ca0 ("ata: ceva: Disable Device Sleep capability") 05e890d84386 ("ata: ceva: Make RxWaterMark value as module parameter") 3bc867de85b5 ("ata: ceva: Add CCI support for SATA if CCI is enabled") 26bf3b6658a2 ("ata: ceva: Correct the suspend and resume logic for SATA") f0a559aae57c ("ata: ceva: Add SMMU support for SATA IP") b2b60bcc7d09 ("media: imx274: device tree binding file") 64c6f7da8c2c ("dmaengine: zynqmp_dma: Add runtime pm support") 30df4574e432 ("dmaengine: zynqmp_dma: Fix kernel doc-format") 49a83f002731 ("net: emaclite: Fix block comments style") da7bf20e7758 ("tty: serial: uartlite: Add structure for private data") 14288befeb57 ("tty: serial: uartlite: Add clock adaptation") a3a10614ca0f ("tty: serial: uartlite: Add support for suspend and resume")
Hi Arnd,
On 15. 08. 19 23:34, Arnd Bergmann wrote:
I searched through https://github.com/Xilinx/linux-xlnx/tree/xlnx_rebase_v4.9 for commits that got backported from mainline, and categorized them to see if we want them in an LTS kernel.
This is not how we are working. Normally these patches are done against Xilinx tree and then sent to mainline. And Xilinx kernel was pretty close to mainline version that's why it was easy to do.
I expect that v4.9 is mentioned here because extended EOL. There are also xlnx_rebase_v4.14/xlnx_rebase_v4.19. I see that v4.14 is another candidate too.
What's the purpose of this work? Make v4.9 better?
Thanks, Michal
On Fri, Aug 16, 2019 at 8:54 AM Michal Simek michal.simek@xilinx.com wrote:
What's the purpose of this work? Make v4.9 better?
Yes. The purpose is to pick all stuff you have backported and see if it should actually be in -stable so that stable is stable for everyone. It's kind of crowdfunding stable development.
Yours, Linus Walleij
On 20. 08. 19 15:29, Linus Walleij wrote:
On Fri, Aug 16, 2019 at 8:54 AM Michal Simek michal.simek@xilinx.com wrote:
What's the purpose of this work? Make v4.9 better?
Yes. The purpose is to pick all stuff you have backported and see if it should actually be in -stable so that stable is stable for everyone. It's kind of crowdfunding stable development.
Ok. I wasn't aware about it. What's the expectation from us in this? Comment that list or it is just for information that this is happening and stable maintainers should pick it up?
Thanks, Michal
On Tue, Aug 20, 2019 at 3:46 PM Michal Simek michal.simek@xilinx.com wrote:
On 20. 08. 19 15:29, Linus Walleij wrote:
On Fri, Aug 16, 2019 at 8:54 AM Michal Simek michal.simek@xilinx.com wrote:
What's the purpose of this work? Make v4.9 better?
Yes. The purpose is to pick all stuff you have backported and see if it should actually be in -stable so that stable is stable for everyone. It's kind of crowdfunding stable development.
Ok. I wasn't aware about it. What's the expectation from us in this? Comment that list or it is just for information that this is happening and stable maintainers should pick it up?
Something like that.
I think Arnd will get around to sending them to Greg, Sasha et al once he have them on the archaic stable patch format. But he can answer once he has time.
I guess it also illustrates stuff you should ideally mail stable about directly, but I understand as well as everyone that this takes time and effort and I know why all processes are not always optimal. We are stepping in and helping out a bit, at least for a one-off.
Yours, Linus Walleij
linux-stable-mirror@lists.linaro.org
-
Arnd Bergmann -
Linus Walleij -
Michal Simek