On 04/11/2022 10:20, Johan Hovold wrote:

There are three UFS reference clocks on SC8280XP which are used as follows:

• The GCC_UFS_REF_CLKREF_CLK clock is fed to any UFS device connected to either controller.

• The GCC_UFS_1_CARD_CLKREF_CLK and GCC_UFS_CARD_CLKREF_CLK clocks provide reference clocks to the two PHYs.

Note that this depends on first updating the clock driver to reflect that all three clocks are sourced from CXO. Specifically, the UFS controller driver expects the device reference clock to have a valid frequency:

ufshcd-qcom 1d84000.ufs: invalid ref_clk setting = 0

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Fixes: 8d6b458ce6e9 ("arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clock") Fixes: f3aa975e230e ("arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy") Link: https://lore.kernel.org/lkml/Y2OEjNAPXg5BfOxH@hovoldconsulting.com/ Cc: stable@vger.kernel.org # 5.20 Signed-off-by: Johan Hovold johan+linaro@kernel.org

---

Reviewed-by: Konrad Dybcio konrad.dybcio@somainline.org

Konrad

arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 21ac119e0382..e0d0fb6994b5 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -912,7 +912,7 @@ ufs_mem_hc: ufs@1d84000 { <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,

• 		 <&rpmhcc RPMH_CXO_CLK>,
  

• 		 <&gcc GCC_UFS_REF_CLKREF_CLK>,
  	 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
  	 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
  	 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
  

@@ -943,7 +943,7 @@ ufs_mem_phy: phy@1d87000 { ranges; clock-names = "ref", "ref_aux";

• 	clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
  

• 	clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
  	 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
  

resets = <&ufs_mem_hc 0>; @@ -980,7 +980,7 @@ ufs_card_hc: ufs@1da4000 { <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, <&gcc GCC_UFS_CARD_AHB_CLK>, <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,

• 		 <&rpmhcc RPMH_CXO_CLK>,
  

• 		 <&gcc GCC_UFS_REF_CLKREF_CLK>,
  	 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
  	 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
  	 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
  

@@ -1011,7 +1011,7 @@ ufs_card_phy: phy@1da7000 { ranges; clock-names = "ref", "ref_aux";

• 	clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
  

• 	clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
  	 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
  

resets = <&ufs_card_hc 0>;