From: Kamil Duljas kamil.duljas@gmail.com
[ Upstream commit f8ba14b780273fd290ddf7ee0d7d7decb44cc365 ]
skl_platform_register() uses krealloc. When krealloc is fail, then previous memory is not freed. The leak is also when soc component registration failed.
Signed-off-by: Kamil Duljas kamil.duljas@gmail.com Reviewed-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/skylake/skl-pcm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 6b2c8c6e7a00f..5195e012dc6d4 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1450,6 +1450,7 @@ int skl_platform_register(struct device *dev) dais = krealloc(skl->dais, sizeof(skl_fe_dai) + sizeof(skl_platform_dai), GFP_KERNEL); if (!dais) { + kfree(skl->dais); ret = -ENOMEM; goto err; } @@ -1462,8 +1463,10 @@ int skl_platform_register(struct device *dev)
ret = devm_snd_soc_register_component(dev, &skl_component, skl->dais, num_dais); - if (ret) + if (ret) { + kfree(skl->dais); dev_err(dev, "soc component registration failed %d\n", ret); + } err: return ret; }
From: Maciej Strozek mstrozek@opensource.cirrus.com
[ Upstream commit e7f289a59e76a5890a57bc27b198f69f175f75d9 ]
Signed-off-by: Maciej Strozek mstrozek@opensource.cirrus.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs43130.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index cf29dec28b5e3..95060ae7dbb40 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1686,7 +1686,7 @@ static ssize_t cs43130_show_dc_r(struct device *dev, return cs43130_show_dc(dev, buf, HP_RIGHT); }
-static u16 const cs43130_ac_freq[CS43130_AC_FREQ] = { +static const u16 cs43130_ac_freq[CS43130_AC_FREQ] = { 24, 43, 93, @@ -2365,7 +2365,7 @@ static const struct regmap_config cs43130_regmap = { .use_single_rw = true, /* needed for regcache_sync */ };
-static u16 const cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { +static const u16 cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { 50, 120, };
From: Maciej Strozek mstrozek@opensource.cirrus.com
[ Upstream commit aa7e8e5e4011571022dc06e4d7a2f108feb53d1a ]
Signed-off-by: Maciej Strozek mstrozek@opensource.cirrus.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs43130.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index 95060ae7dbb40..0ffd935645553 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -581,7 +581,7 @@ static int cs43130_set_sp_fmt(int dai_id, unsigned int bitwidth_sclk, break; case SND_SOC_DAIFMT_LEFT_J: hi_size = bitwidth_sclk; - frm_delay = 2; + frm_delay = 0; frm_phase = 1; break; case SND_SOC_DAIFMT_DSP_A:
From: Shuming Fan shumingf@realtek.com
[ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ]
This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status.
Signed-off-by: Shuming Fan shumingf@realtek.com Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5645.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index a713e9649b56b..37ad3bee66a47 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -419,6 +419,7 @@ struct rt5645_priv { struct regulator_bulk_data supplies[ARRAY_SIZE(rt5645_supply_names)]; struct rt5645_eq_param_s *eq_param; struct timer_list btn_check_timer; + struct mutex jd_mutex;
int codec_type; int sysclk; @@ -3216,6 +3217,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse rt5645_enable_push_button_irq(component, true); } } else { + if (rt5645->en_button_func) + rt5645_enable_push_button_irq(component, false); snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); rt5645->jack_type = SND_JACK_HEADPHONE; @@ -3296,6 +3299,8 @@ static void rt5645_jack_detect_work(struct work_struct *work) if (!rt5645->component) return;
+ mutex_lock(&rt5645->jd_mutex); + switch (rt5645->pdata.jd_mode) { case 0: /* Not using rt5645 JD */ if (rt5645->gpiod_hp_det) { @@ -3320,7 +3325,7 @@ static void rt5645_jack_detect_work(struct work_struct *work)
if (!val && (rt5645->jack_type == 0)) { /* jack in */ report = rt5645_jack_detect(rt5645->component, 1); - } else if (!val && rt5645->jack_type != 0) { + } else if (!val && rt5645->jack_type == SND_JACK_HEADSET) { /* for push button and jack out */ btn_type = 0; if (snd_soc_component_read32(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) { @@ -3376,6 +3381,8 @@ static void rt5645_jack_detect_work(struct work_struct *work) rt5645_jack_detect(rt5645->component, 0); }
+ mutex_unlock(&rt5645->jd_mutex); + snd_soc_jack_report(rt5645->hp_jack, report, SND_JACK_HEADPHONE); snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE); if (rt5645->en_button_func) @@ -4072,6 +4079,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, } timer_setup(&rt5645->btn_check_timer, rt5645_btn_check_callback, 0);
+ mutex_init(&rt5645->jd_mutex); INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work); INIT_DELAYED_WORK(&rt5645->rcclock_work, rt5645_rcclock_work);
From: Thinh Tran thinhtr@linux.vnet.ibm.com
[ Upstream commit 16b55b1f2269962fb6b5154b8bf43f37c9a96637 ]
When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below:
enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, };
If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action.
EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device
To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate.
Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state.
Signed-off-by: Thinh Tran thinhtr@linux.vnet.ibm.com Tested-by: Venkata Sai Duggi venkata.sai.duggi@ibm.com Reviewed-by: David Christensen drc@linux.vnet.ibm.com Reviewed-by: Michael Chan michael.chan@broadcom.com Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/tg3.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index f0b5c8a4d29f5..2fbcbdd650229 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6449,6 +6449,14 @@ static void tg3_dump_state(struct tg3 *tp) int i; u32 *regs;
+ /* If it is a PCI error, all registers will be 0xffff, + * we don't dump them out, just report the error and return + */ + if (tp->pdev->error_state != pci_channel_io_normal) { + netdev_err(tp->dev, "PCI channel ERROR!\n"); + return; + } + regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC); if (!regs) return; @@ -11190,7 +11198,8 @@ static void tg3_reset_task(struct work_struct *work) rtnl_lock(); tg3_full_lock(tp, 0);
- if (tp->pcierr_recovery || !netif_running(tp->dev)) { + if (tp->pcierr_recovery || !netif_running(tp->dev) || + tp->pdev->error_state != pci_channel_io_normal) { tg3_flag_clear(tp, RESET_TASK_PENDING); tg3_full_unlock(tp); rtnl_unlock();
From: David Rau David.Rau.opensource@dm.renesas.com
[ Upstream commit 5f44de697383fcc9a9a1a78f99e09d1838704b90 ]
Change the default MIC detection impedance threshold to 200ohm to support low mic DC impedance headset.
Signed-off-by: David Rau David.Rau.opensource@dm.renesas.com Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.ren... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/da7219-aad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index 7e18e007a639f..e3515ac8b223f 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -659,7 +659,7 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct snd_soc_component aad_pdata->mic_det_thr = da7219_aad_fw_mic_det_thr(component, fw_val32); else - aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_500_OHMS; + aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_200_OHMS;
if (fwnode_property_read_u32(aad_np, "dlg,jack-ins-deb", &fw_val32) >= 0) aad_pdata->jack_ins_deb =
From: Xiang Yang xiangyang3@huawei.com
[ Upstream commit 73bf1c9ae6c054c53b8e84452c5e46f86dd28246 ]
Smatch reports the warning below: drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind() error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV), which can not be used directly. Fix this by checking the return value before using it.
Signed-off-by: Xiang Yang xiangyang3@huawei.com Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 2092a650df7d5..551a97e45d973 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1840,6 +1840,8 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) return ret;
crtc = exynos_drm_crtc_get_by_type(drm_dev, EXYNOS_DISPLAY_TYPE_HDMI); + if (IS_ERR(crtc)) + return PTR_ERR(crtc); crtc->pipe_clk = &hdata->phy_clk;
ret = hdmi_create_connector(encoder);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin