The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 128b0c9781c9f2651bea163cb85e52a6c7be0f9e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2023102936-encounter-impatient-894d@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 128b0c9781c9f2651bea163cb85e52a6c7be0f9e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner tglx@linutronix.de Date: Wed, 25 Oct 2023 23:04:15 +0200 Subject: [PATCH] x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility

David and a few others reported that on certain newer systems some legacy interrupts fail to work correctly.

Debugging revealed that the BIOS of these systems leaves the legacy PIC in uninitialized state which makes the PIC detection fail and the kernel switches to a dummy implementation.

Unfortunately this fallback causes quite some code to fail as it depends on checks for the number of legacy PIC interrupts or the availability of the real PIC.

In theory there is no reason to use the PIC on any modern system when IO/APIC is available, but the dependencies on the related checks cannot be resolved trivially and on short notice. This needs lots of analysis and rework.

The PIC detection has been added to avoid quirky checks and force selection of the dummy implementation all over the place, especially in VM guest scenarios. So it's not an option to revert the relevant commit as that would break a lot of other scenarios.

One solution would be to try to initialize the PIC on detection fail and retry the detection, but that puts the burden on everything which does not have a PIC.

Fortunately the ACPI/MADT table header has a flag field, which advertises in bit 0 that the system is PCAT compatible, which means it has a legacy 8259 PIC.

Evaluate that bit and if set avoid the detection routine and keep the real PIC installed, which then gets initialized (for nothing) and makes the rest of the code with all the dependencies work again.

Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately") Reported-by: David Lazar dlazar@gmail.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: David Lazar dlazar@gmail.com Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Mario Limonciello mario.limonciello@amd.com Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003 Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx

diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index 637fa1df3512..c715097e92fd 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -69,6 +69,8 @@ struct legacy_pic { void (*make_irq)(unsigned int irq); };

+void legacy_pic_pcat_compat(void); + extern struct legacy_pic *legacy_pic; extern struct legacy_pic null_legacy_pic;

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 2a0ea38955df..c55c0ef47a18 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -148,6 +148,9 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) pr_debug("Local APIC address 0x%08x\n", madt->address); }

+ if (madt->flags & ACPI_MADT_PCAT_COMPAT) + legacy_pic_pcat_compat(); + /* ACPI 6.3 and newer support the online capable bit. */ if (acpi_gbl_FADT.header.revision > 6 || (acpi_gbl_FADT.header.revision == 6 && diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 30a55207c000..c20d1832c481 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -32,6 +32,7 @@ */ static void init_8259A(int auto_eoi);

+static bool pcat_compat __ro_after_init; static int i8259A_auto_eoi; DEFINE_RAW_SPINLOCK(i8259A_lock);

@@ -299,15 +300,32 @@ static void unmask_8259A(void)

static int probe_8259A(void) { + unsigned char new_val, probe_val = ~(1 << PIC_CASCADE_IR); unsigned long flags; - unsigned char probe_val = ~(1 << PIC_CASCADE_IR); - unsigned char new_val; + + /* + * If MADT has the PCAT_COMPAT flag set, then do not bother probing + * for the PIC. Some BIOSes leave the PIC uninitialized and probing + * fails. + * + * Right now this causes problems as quite some code depends on + * nr_legacy_irqs() > 0 or has_legacy_pic() == true. This is silly + * when the system has an IO/APIC because then PIC is not required + * at all, except for really old machines where the timer interrupt + * must be routed through the PIC. So just pretend that the PIC is + * there and let legacy_pic->init() initialize it for nothing. + * + * Alternatively this could just try to initialize the PIC and + * repeat the probe, but for cases where there is no PIC that's + * just pointless. + */ + if (pcat_compat) + return nr_legacy_irqs(); + /* - * Check to see if we have a PIC. - * Mask all except the cascade and read - * back the value we just wrote. If we don't - * have a PIC, we will read 0xff as opposed to the - * value we wrote. + * Check to see if we have a PIC. Mask all except the cascade and + * read back the value we just wrote. If we don't have a PIC, we + * will read 0xff as opposed to the value we wrote. */ raw_spin_lock_irqsave(&i8259A_lock, flags);

@@ -429,5 +447,9 @@ static int __init i8259A_init_ops(void)

return 0; } - device_initcall(i8259A_init_ops); + +void __init legacy_pic_pcat_compat(void) +{ + pcat_compat = true; +}