[PATCH AUTOSEL 6.1 01/26] Input: soc_button_array - add invalid acpi_index DMI quirk handling
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 20a99a291d564a559cc2fd013b4824a3bb3f1db7 ]
Some devices have a wrong entry in their button array which points to a GPIO which is required in another driver, so soc_button_array must not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L, where the PNP0C40 home button entry points to a GPIO which is not a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L to this new DMI quirk table.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/soc_button_array.c | 30 +++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 09489380afda7..e79f5497948b8 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -108,6 +108,27 @@ static const struct dmi_system_id dmi_use_low_level_irq[] = { {} /* Terminating entry */ };
+/* + * Some devices have a wrong entry which points to a GPIO which is + * required in another driver, so this driver must not claim it. + */ +static const struct dmi_system_id dmi_invalid_acpi_index[] = { + { + /* + * Lenovo Yoga Book X90F / X90L, the PNP0C40 home button entry + * points to a GPIO which is not a home button and which is + * required by the lenovo-yogabook driver. + */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), + }, + .driver_data = (void *)1l, + }, + {} /* Terminating entry */ +}; + /* * Get the Nth GPIO number from the ACPI object. */ @@ -137,6 +158,8 @@ soc_button_device_create(struct platform_device *pdev, struct platform_device *pd; struct gpio_keys_button *gpio_keys; struct gpio_keys_platform_data *gpio_keys_pdata; + const struct dmi_system_id *dmi_id; + int invalid_acpi_index = -1; int error, gpio, irq; int n_buttons = 0;
@@ -154,10 +177,17 @@ soc_button_device_create(struct platform_device *pdev, gpio_keys = (void *)(gpio_keys_pdata + 1); n_buttons = 0;
+ dmi_id = dmi_first_match(dmi_invalid_acpi_index); + if (dmi_id) + invalid_acpi_index = (long)dmi_id->driver_data; + for (info = button_info; info->name; info++) { if (info->autorepeat != autorepeat) continue;
+ if (info->acpi_index == invalid_acpi_index) + continue; + error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq); if (error || irq < 0) { /*
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit ca8fc6814844d8787e7fec61b2544a871ea8b675 ]
The WCD938x audio codec Soundwire interface part is not a DAI and does not allow sound-dai-cells:
sc7280-idp.dtb: codec@0,4: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Douglas Anderson dianders@chromium.org Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Bjorn Andersson andersson@kernel.org Link: https://lore.kernel.org/r/20230220095401.64196-1-krzysztof.kozlowski@linaro.... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ca50f0ba9b815..1c370dcfe60b9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -488,7 +488,6 @@ &swr0 { wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; - #sound-dai-cells = <1>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -499,7 +498,6 @@ &swr1 { wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - #sound-dai-cells = <1>; qcom,tx-port-mapping = <1 2 3 4>; }; };
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit 16bd455d0897d1b8b7a9aee2ed51d75b14a34563 ]
The WCD938x audio codec Soundwire interface part is not a DAI and does not allow sound-dai-cells:
sc7280-herobrine-crd.dtb: codec@0,4: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Douglas Anderson dianders@chromium.org Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Bjorn Andersson andersson@kernel.org Link: https://lore.kernel.org/r/20230220095401.64196-2-krzysztof.kozlowski@linaro.... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index f7665b3799233..c358abc052eb8 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -418,7 +418,6 @@ &swr0 { wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; - #sound-dai-cells = <1>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -427,7 +426,6 @@ &swr1 { wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - #sound-dai-cells = <1>; qcom,tx-port-mapping = <1 2 3 4>; }; };
From: Vineeth Vijayan vneethv@linux.ibm.com
[ Upstream commit 89c0c62e947a01e7a36b54582fd9c9e346170255 ]
Currently, if the device is offline and all the channel paths are either configured or varied offline, the associated subchannel gets unregistered. Don't unregister the subchannel, instead unregister offline device.
Signed-off-by: Vineeth Vijayan vneethv@linux.ibm.com Reviewed-by: Peter Oberparleiter oberpar@linux.ibm.com Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index ba4c69226c337..02813b63f90fd 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1367,6 +1367,7 @@ void ccw_device_set_notoper(struct ccw_device *cdev) enum io_sch_action { IO_SCH_UNREG, IO_SCH_ORPH_UNREG, + IO_SCH_UNREG_CDEV, IO_SCH_ATTACH, IO_SCH_UNREG_ATTACH, IO_SCH_ORPH_ATTACH, @@ -1399,7 +1400,7 @@ static enum io_sch_action sch_get_action(struct subchannel *sch) } if ((sch->schib.pmcw.pam & sch->opm) == 0) { if (ccw_device_notify(cdev, CIO_NO_PATH) != NOTIFY_OK) - return IO_SCH_UNREG; + return IO_SCH_UNREG_CDEV; return IO_SCH_DISC; } if (device_is_disconnected(cdev)) @@ -1461,6 +1462,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) case IO_SCH_ORPH_ATTACH: ccw_device_set_disconnected(cdev); break; + case IO_SCH_UNREG_CDEV: case IO_SCH_UNREG_ATTACH: case IO_SCH_UNREG: if (!cdev) @@ -1494,6 +1496,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) if (rc) goto out; break; + case IO_SCH_UNREG_CDEV: case IO_SCH_UNREG_ATTACH: spin_lock_irqsave(sch->lock, flags); sch_set_cdev(sch, NULL);
From: Clark Wang xiaoning.wang@nxp.com
[ Upstream commit 9728fb3ce11729aa8c276825ddf504edeb00611d ]
When all bits of IER are set to 0, we still can observe the lpspi irq events when using DMA mode to transfer data.
So disable irq to avoid the too much irq events.
Signed-off-by: Clark Wang xiaoning.wang@nxp.com Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-fsl-lpspi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index e8c1c8a4c6c82..9e324d72596af 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -905,9 +905,14 @@ static int fsl_lpspi_probe(struct platform_device *pdev) ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller); if (ret == -EPROBE_DEFER) goto out_pm_get; - if (ret < 0) dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret); + else + /* + * disable LPSPI module IRQ when enable DMA mode successfully, + * to prevent the unexpected LPSPI module IRQ events. + */ + disable_irq(irq);
ret = devm_spi_register_controller(&pdev->dev, controller); if (ret < 0) {
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
[ Upstream commit 2d7c2f9272de6347a9cec0fc07708913692c0ae3 ]
regmap-sdw does not support multi register writes, so there is no point in setting this flag. This also leads to incorrect programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wcd938x-sdw.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/sound/soc/codecs/wcd938x-sdw.c b/sound/soc/codecs/wcd938x-sdw.c index 402286dfaea44..9c10200ff34b2 100644 --- a/sound/soc/codecs/wcd938x-sdw.c +++ b/sound/soc/codecs/wcd938x-sdw.c @@ -1190,7 +1190,6 @@ static const struct regmap_config wcd938x_regmap_config = { .readable_reg = wcd938x_readable_register, .writeable_reg = wcd938x_writeable_register, .volatile_reg = wcd938x_volatile_register, - .can_multi_write = true, };
static const struct sdw_slave_ops wcd9380_slave_ops = {
From: Herve Codina herve.codina@bootlin.com
[ Upstream commit 8938f75a5e35c597a647c28984a0304da7a33d63 ]
In the error path, a of_node_put() for platform is missing. Just add it.
Signed-off-by: Herve Codina herve.codina@bootlin.com Acked-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/generic/simple-card.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index feb55b66239b8..fbb682747f598 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -416,6 +416,7 @@ static int __simple_for_each_link(struct asoc_simple_priv *priv,
if (ret < 0) { of_node_put(codec); + of_node_put(plat); of_node_put(np); goto error; }
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 700581ede41d029403feec935df4616309696fd7 ]
A BIOS/DMI update seems to have broken some devices, let's add a new mapping.
Link: https://github.com/thesofproject/linux/issues/4323 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Rander Wang rander.wang@intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230515074859.3097-1-yung-chuan.liao@linux.intel.... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/dmi-quirks.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index 58ea013fa918a..2a1096dab63d3 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -99,6 +99,13 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { }, .driver_data = (void *)intel_tgl_bios, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_BOARD_NAME, "8709"), + }, + .driver_data = (void *)intel_tgl_bios, + }, { /* quirk used for NUC15 'Bishop County' LAPBC510 and LAPBC710 skews */ .matches = {
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit 99e09b9c0ab43346c52f2787ca4e5c4b1798362e ]
Reverse actions in qcom_swrm_startup() error paths to avoid leaking stream memory and keeping runtime PM unbalanced.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230517163736.997553-1-krzysztof.kozlowski@linaro... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/qcom.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 21c50972047f5..b2eb3090f4b46 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1090,8 +1090,10 @@ static int qcom_swrm_startup(struct snd_pcm_substream *substream, }
sruntime = sdw_alloc_stream(dai->name); - if (!sruntime) - return -ENOMEM; + if (!sruntime) { + ret = -ENOMEM; + goto err_alloc; + }
ctrl->sruntime[dai->id] = sruntime;
@@ -1101,12 +1103,19 @@ static int qcom_swrm_startup(struct snd_pcm_substream *substream, if (ret < 0 && ret != -ENOTSUPP) { dev_err(dai->dev, "Failed to set sdw stream on %s\n", codec_dai->name); - sdw_release_stream(sruntime); - return ret; + goto err_set_stream; } }
return 0; + +err_set_stream: + sdw_release_stream(sruntime); +err_alloc: + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); + + return ret; }
static void qcom_swrm_shutdown(struct snd_pcm_substream *substream,
From: Edson Juliano Drosdeck edson.drosdeck@gmail.com
[ Upstream commit e384dba03e3294ce7ea69e4da558e9bf8f0e8946 ]
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the DMI table, so that active-high jack-detect will work properly on these laptops.
Signed-off-by: Edson Juliano Drosdeck edson.drosdeck@gmail.com Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/nau8824.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index 4f19fd9b65d11..5a4db8944d06a 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1903,6 +1903,30 @@ static const struct dmi_system_id nau8824_quirk_table[] = { }, .driver_data = (void *)(NAU8824_MONO_SPEAKER), }, + { + /* Positivo CW14Q01P */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "CW14Q01P"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, + { + /* Positivo K1424G */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "K1424G"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, + { + /* Positivo N14ZP74G */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "N14ZP74G"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, {} };
From: Sicong Jiang kevin.jiangsc@gmail.com
[ Upstream commit 57d1e8900495cf1751cec74db16fe1a0fe47efbb ]
Thinkpad Neo14 Ryzen Edition uses Ryzen 6800H processor, and adding to quirks list for acp6x will enable internal mic.
Signed-off-by: Sicong Jiang kevin.jiangsc@gmail.com Link: https://lore.kernel.org/r/20230531090635.89565-1-kevin.jiangsc@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 84b401b685f7f..c1ca3ceac5f2f 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -171,6 +171,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "21CL"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21EF"), + } + }, { .driver_data = &acp6x_card, .matches = {
From: Jammy Huang jammy_huang@aspeedtech.com
[ Upstream commit 3692ababa322b4d9ffbd973865bc88018e896fcd ]
If we switch display and update cursor together, it could lead to modeset failed because of concurrent access to IO registers.
Add lock protection in DP's edid access to avoid this problem.
Reviewed-by: Thomas Zimmermann tzimmermann@suse.de Signed-off-by: Jammy Huang jammy_huang@aspeedtech.com Signed-off-by: Thomas Zimmermann tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20230601004847.1115-1-jammy_hu... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/ast/ast_mode.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 1bc0220e6783e..38064e497b5d6 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1634,6 +1634,8 @@ static int ast_dp501_output_init(struct ast_private *ast) static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector) { void *edid; + struct drm_device *dev = connector->dev; + struct ast_device *ast = to_ast_device(dev);
int succ; int count; @@ -1642,9 +1644,17 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector) if (!edid) goto err_drm_connector_update_edid_property;
+ /* + * Protect access to I/O registers from concurrent modesetting + * by acquiring the I/O-register lock. + */ + mutex_lock(&ast->ioregs_lock); + succ = ast_astdp_read_edid(connector->dev, edid); if (succ < 0) - goto err_kfree; + goto err_mutex_unlock; + + mutex_unlock(&ast->ioregs_lock);
drm_connector_update_edid_property(connector, edid); count = drm_add_edid_modes(connector, edid); @@ -1652,7 +1662,8 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector)
return count;
-err_kfree: +err_mutex_unlock: + mutex_unlock(&ast->ioregs_lock); kfree(edid); err_drm_connector_update_edid_property: drm_connector_update_edid_property(connector, NULL);
From: Andreas Gruenbacher agruenba@redhat.com
[ Upstream commit fa58cc888d67e640e354d8b3ceef877ea167b0cf ]
When a direct I/O write is performed, iomap_dio_rw() invalidates the part of the page cache which the write is going to before carrying out the write. In the odd case, the direct I/O write will be reading from the same page it is writing to. gfs2 carries out writes with page faults disabled, so it should have been obvious that this page invalidation can cause iomap_dio_rw() to never make any progress. Currently, gfs2 will end up in an endless retry loop in gfs2_file_direct_write() instead, though.
Break this endless loop by limiting the number of retries and falling back to buffered I/O after that.
Also simplify should_fault_in_pages() sightly and add a comment to make the above case easier to understand.
Reported-by: Jan Kara jack@suse.cz Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/file.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 60c6fb91fb589..bc6cd5f4b1077 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -783,9 +783,13 @@ static inline bool should_fault_in_pages(struct iov_iter *i, if (!user_backed_iter(i)) return false;
+ /* + * Try to fault in multiple pages initially. When that doesn't result + * in any progress, fall back to a single page. + */ size = PAGE_SIZE; offs = offset_in_page(iocb->ki_pos); - if (*prev_count != count || !*window_size) { + if (*prev_count != count) { size_t nr_dirtied;
nr_dirtied = max(current->nr_dirtied_pause - @@ -869,6 +873,7 @@ static ssize_t gfs2_file_direct_write(struct kiocb *iocb, struct iov_iter *from, struct gfs2_inode *ip = GFS2_I(inode); size_t prev_count = 0, window_size = 0; size_t written = 0; + bool enough_retries; ssize_t ret;
/* @@ -912,11 +917,17 @@ static ssize_t gfs2_file_direct_write(struct kiocb *iocb, struct iov_iter *from, if (ret > 0) written = ret;
+ enough_retries = prev_count == iov_iter_count(from) && + window_size <= PAGE_SIZE; if (should_fault_in_pages(from, iocb, &prev_count, &window_size)) { gfs2_glock_dq(gh); window_size -= fault_in_iov_iter_readable(from, window_size); - if (window_size) - goto retry; + if (window_size) { + if (!enough_retries) + goto retry; + /* fall back to buffered I/O */ + ret = 0; + } } out_unlock: if (gfs2_holder_queued(gh))
From: Alexander Gordeev agordeev@linux.ibm.com
[ Upstream commit 03c5c83b70dca3729a3eb488e668e5044bd9a5ea ]
Avoid linker error for randomly generated config file that has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86 and also to commit 4bf3ec384edf ("s390: disable branch profiling for vdso").
Reviewed-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/purgatory/Makefile | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/s390/purgatory/Makefile b/arch/s390/purgatory/Makefile index d237bc6841cb8..4cbf306b8181f 100644 --- a/arch/s390/purgatory/Makefile +++ b/arch/s390/purgatory/Makefile @@ -26,6 +26,7 @@ KBUILD_CFLAGS += -Wno-pointer-sign -Wno-sign-compare KBUILD_CFLAGS += -fno-zero-initialized-in-bss -fno-builtin -ffreestanding KBUILD_CFLAGS += -c -MD -Os -m64 -msoft-float -fno-common KBUILD_CFLAGS += -fno-stack-protector +KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING KBUILD_CFLAGS += $(CLANG_FLAGS) KBUILD_CFLAGS += $(call cc-option,-fno-PIE) KBUILD_AFLAGS := $(filter-out -DCC_USING_EXPOLINE,$(KBUILD_AFLAGS))
From: Chancel Liu chancel.liu@nxp.com
[ Upstream commit 32cf0046a652116d6a216d575f3049a9ff9dd80d ]
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK from RX/TX it sync with if BYP bit is asserted. It's a workaround to fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk form RX and BYP=1. TX can get BCLK only if the following two conditions are valid: 1. SION of RX BCLK IOMUX pad is set to 1 2. BCI of TX is set to 1
Signed-off-by: Chancel Liu chancel.liu@nxp.com Acked-by: Shengjiu Wang shengjiu.wang@gmail.com Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/fsl_sai.c | 11 +++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 6d88af5b287fe..b33104715c7ba 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -491,14 +491,21 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK, FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
- if (savediv == 1) + if (savediv == 1) { regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, FSL_SAI_CR2_BYP); - else + if (fsl_sai_dir_is_synced(sai, adir)) + regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs), + FSL_SAI_CR2_BCI, FSL_SAI_CR2_BCI); + else + regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs), + FSL_SAI_CR2_BCI, 0); + } else { regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, savediv / 2 - 1); + }
if (sai->soc_data->max_register >= FSL_SAI_MCTL) { /* SAI is in master mode at this point, so enable MCLK */ diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 697f6690068c8..c5423f81e4560 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -116,6 +116,7 @@
/* SAI Transmit and Receive Configuration 2 Register */ #define FSL_SAI_CR2_SYNC BIT(30) +#define FSL_SAI_CR2_BCI BIT(28) #define FSL_SAI_CR2_MSEL_MASK (0x3 << 26) #define FSL_SAI_CR2_MSEL_BUS 0 #define FSL_SAI_CR2_MSEL_MCLK1 BIT(26)
From: "Sayed, Karimuddin" karimuddin.sayed@intel.com
[ Upstream commit 1a93f10c5b12bd766a537b24a50fca5373467303 ]
Add "Intel Reference boad" and "Intel NUC 13" SSID in the alc256. Enable jack headset volume buttons
Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Signed-off-by: Sayed, Karimuddin karimuddin.sayed@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230602193812.66768-1-pierre-louis.bossart@linux.... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7b5f194513c7b..42bd8ae5892b6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9588,6 +9588,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10ec, 0x124c, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x10ec, 0x1252, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x10ec, 0x1254, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), + SND_PCI_QUIRK(0x10ec, 0x12cc, "Intel Reference board", ALC225_FIXUP_HEADSET_JACK), SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_AMP), @@ -9807,6 +9808,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC), SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED), SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10), + SND_PCI_QUIRK(0x8086, 0x3038, "Intel NUC 13", ALC225_FIXUP_HEADSET_JACK), SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
#if 0
From: Simon Horman horms@kernel.org
[ Upstream commit 7ebfd881abe9e0ea9557b29dab6aa28d294fabb4 ]
Rather than casting pci1xxxx_i2c_shutdown to an incompatible function type, update the type to match that expected by __devm_add_action.
Reported by clang-16 with W-1:
.../i2c-mchp-pci1xxxx.c:1159:29: error: cast from 'void (*)(struct pci1xxxx_i2c *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/device.h:251:29: note: expanded from macro 'devm_add_action' __devm_add_action(release, action, data, #action) ^~~~~~
No functional change intended. Compile tested only.
Signed-off-by: Simon Horman horms@kernel.org Reviewed-by: Horatiu Vultur horatiu.vultur@microchip.com Reviewed-by: Andi Shyti andi.shyti@kernel.org Reviewed-by: Tharun Kumar Ptharunkumar.pasumarthi@microchip.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-mchp-pci1xxxx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c index b21ffd6df9276..5ef136c3ecb12 100644 --- a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c +++ b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c @@ -1118,8 +1118,10 @@ static int pci1xxxx_i2c_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_i2c_pm_ops, pci1xxxx_i2c_suspend, pci1xxxx_i2c_resume);
-static void pci1xxxx_i2c_shutdown(struct pci1xxxx_i2c *i2c) +static void pci1xxxx_i2c_shutdown(void *data) { + struct pci1xxxx_i2c *i2c = data; + pci1xxxx_i2c_config_padctrl(i2c, false); pci1xxxx_i2c_configure_core_reg(i2c, false); } @@ -1156,7 +1158,7 @@ static int pci1xxxx_i2c_probe_pci(struct pci_dev *pdev, init_completion(&i2c->i2c_xfer_done); pci1xxxx_i2c_init(i2c);
- ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c); + ret = devm_add_action(dev, pci1xxxx_i2c_shutdown, i2c); if (ret) return ret;
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit 4a672d500bfd6bb87092c33d5a2572c3d0a1cf83 ]
Several device tree files get the polarity of the pendown-gpios wrong: this signal is active low. Fix up all incorrect flags, so that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- arch/arm/boot/dts/at91sam9261ek.dts | 2 +- arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +- arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +- arch/arm/boot/dts/omap5-cm-t54.dts | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2fc9a5d5e0c0d..625b9b311b49d 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -527,7 +527,7 @@ touchscreen@1 {
interrupt-parent = <&gpio1>; interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; + pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 88869ca874d1a..045cb253f23a6 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -156,7 +156,7 @@ tsc2046@2 { compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <3000000>; - pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <150>; ti,x-max = /bits/ 16 <3830>; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts index d917dc4f2f227..6ad39dca70096 100644 --- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -64,7 +64,7 @@ ads7846@0 { interrupt-parent = <&gpio2>; interrupts = <7 0>; spi-max-frequency = <1000000>; - pendown-gpio = <&gpio2 7 0>; + pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vcc-supply = <®_3p3v>; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <4095>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f483bc0afe5ea..234e5fc647b22 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -205,7 +205,7 @@ tsc2046@0 { pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; touchscreen-max-pressure = <255>; wakeup-source; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e61b8a2bfb7de..51baedf1603bd 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -227,7 +227,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 3decc2d78a6ca..a7f99ae0c1fe9 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c595afe4181d7..d310b5c7bac36 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -311,7 +311,7 @@ tsc2046@0 { interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 1d6e88f99eb31..c3570acc35fad 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -149,7 +149,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e30f9d45790e..d95a0e130058c 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -160,7 +160,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 559853764487f..4c3b6bab179cc 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -651,7 +651,7 @@ tsc2046@0 { pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>; vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index ca759b7b8a580..e62ea8b6d53fd 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -354,7 +354,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
From: Nitesh Shetty nj.shetty@samsung.com
[ Upstream commit 8cfb98196cceec35416041c6b91212d2b99392e4 ]
Memory/pages are not freed, when unloading nullblk driver.
Steps to reproduce issue 1.free -h total used free shared buff/cache available Mem: 7.8Gi 260Mi 7.1Gi 3.0Mi 395Mi 7.3Gi Swap: 0B 0B 0B 2.modprobe null_blk memory_backed=1 3.dd if=/dev/urandom of=/dev/nullb0 oflag=direct bs=1M count=1000 4.modprobe -r null_blk 5.free -h total used free shared buff/cache available Mem: 7.8Gi 1.2Gi 6.1Gi 3.0Mi 398Mi 6.3Gi Swap: 0B 0B 0B
Signed-off-by: Anuj Gupta anuj20.g@samsung.com Signed-off-by: Nitesh Shetty nj.shetty@samsung.com Link: https://lore.kernel.org/r/20230605062354.24785-1-nj.shetty@samsung.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/null_blk/main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c index c45d09a9a9421..e8cb914223cdf 100644 --- a/drivers/block/null_blk/main.c +++ b/drivers/block/null_blk/main.c @@ -2194,6 +2194,7 @@ static void null_destroy_dev(struct nullb *nullb) struct nullb_device *dev = nullb->dev;
null_del_dev(nullb); + null_free_device_storage(dev, false); null_free_dev(dev); }
From: Inki Dae inki.dae@samsung.com
[ Upstream commit 4a059559809fd1ddbf16f847c4d2237309c08edf ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info then only what we have to is to free ctx->raw_edid so that driver removing can work correctly - it's not an error case.
Signed-off-by: Inki Dae inki.dae@samsung.com Reviewed-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 4d56c8c799c5a..f5e1adfcaa514 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -469,8 +469,6 @@ static int vidi_remove(struct platform_device *pdev) if (ctx->raw_edid != (struct edid *)fake_edid_info) { kfree(ctx->raw_edid); ctx->raw_edid = NULL; - - return -EINVAL; }
component_del(&pdev->dev, &vidi_component_ops);
From: Min Li lm0963hack@gmail.com
[ Upstream commit 48bfd02569f5db49cc033f259e66d57aa6efc9a3 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li lm0963hack@gmail.com Reviewed-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 471fd6c8135f2..27613abeed961 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1335,7 +1335,7 @@ int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data, /* Let the runqueue know that there is work to do. */ queue_work(g2d->g2d_workq, &g2d->runqueue_work);
- if (runqueue_node->async) + if (req->async) goto out;
wait_for_completion(&runqueue_node->complete);
From: Min Li lm0963hack@gmail.com
[ Upstream commit 982b173a6c6d9472730c3116051977e05d17c8c5 ]
Userspace can race to free the gobj(robj converted from), robj should not be accessed again after drm_gem_object_put, otherwith it will result in use-after-free.
Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Min Li lm0963hack@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/radeon_gem.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 261fcbae88d78..75d79c3110389 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -459,7 +459,6 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data, struct radeon_device *rdev = dev->dev_private; struct drm_radeon_gem_set_domain *args = data; struct drm_gem_object *gobj; - struct radeon_bo *robj; int r;
/* for now if someone requests domain CPU - @@ -472,13 +471,12 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data, up_read(&rdev->exclusive_lock); return -ENOENT; } - robj = gem_to_radeon_bo(gobj);
r = radeon_gem_set_domain(gobj, args->read_domains, args->write_domain);
drm_gem_object_put(gobj); up_read(&rdev->exclusive_lock); - r = radeon_gem_handle_lockup(robj->rdev, r); + r = radeon_gem_handle_lockup(rdev, r); return r; }
From: Theodore Ts'o tytso@mit.edu
[ Upstream commit 1b29243933098cdbc31b579b5616e183b4275e2f ]
This reverts commit a44be64bbecb15a452496f60db6eacfee2b59c79.
Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 5db1060b8684f..760249d9152d1 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -6341,7 +6341,6 @@ static int __ext4_remount(struct fs_context *fc, struct super_block *sb) struct ext4_mount_options old_opts; ext4_group_t g; int err = 0; - int enable_rw = 0; #ifdef CONFIG_QUOTA int enable_quota = 0; int i, j; @@ -6528,7 +6527,7 @@ static int __ext4_remount(struct fs_context *fc, struct super_block *sb) if (err) goto restore_opts;
- enable_rw = 1; + sb->s_flags &= ~SB_RDONLY; if (ext4_has_feature_mmp(sb)) { err = ext4_multi_mount_protect(sb, le64_to_cpu(es->s_mmp_block)); @@ -6575,9 +6574,6 @@ static int __ext4_remount(struct fs_context *fc, struct super_block *sb) if (!test_opt(sb, BLOCK_VALIDITY) && sbi->s_system_blks) ext4_release_system_zone(sb);
- if (enable_rw) - sb->s_flags &= ~SB_RDONLY; - /* * Reinitialize lazy itable initialization thread based on * current settings
From: Theodore Ts'o tytso@mit.edu
[ Upstream commit dea9d8f7643fab07bf89a1155f1f94f37d096a5e ]
ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/xattr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index fddde5045d0c8..51d642a95bd29 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2006,8 +2006,9 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode, else { u32 ref;
+#ifdef EXT4_XATTR_DEBUG WARN_ON_ONCE(dquot_initialize_needed(inode)); - +#endif /* The old block is released after updating the inode. */ error = dquot_alloc_block(inode, @@ -2070,8 +2071,9 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode, /* We need to allocate a new block */ ext4_fsblk_t goal, block;
+#ifdef EXT4_XATTR_DEBUG WARN_ON_ONCE(dquot_initialize_needed(inode)); - +#endif goal = ext4_group_first_block_no(sb, EXT4_I(inode)->i_block_group); block = ext4_new_meta_blocks(handle, inode, goal, 0,
From: Shannon Nelson shannon.nelson@amd.com
[ Upstream commit 376daf317753ccb6b1ecbdece66018f7f6313a7f ]
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs know about the features that have been negotiated. This allows vhost to more safely make decisions based on the features, such as when using PACKED vs split queues.
Signed-off-by: Shannon Nelson shannon.nelson@amd.com Acked-by: Jason Wang jasowang@redhat.com Message-Id: 20230424225031.18947-2-shannon.nelson@amd.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/vdpa.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index 6f532da59e08a..57f7c71da571c 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -377,7 +377,10 @@ static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep) { struct vdpa_device *vdpa = v->vdpa; const struct vdpa_config_ops *ops = vdpa->config; + struct vhost_dev *d = &v->vdev; + u64 actual_features; u64 features; + int i;
/* * It's not allowed to change the features after they have @@ -392,6 +395,16 @@ static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep) if (vdpa_set_features(vdpa, features)) return -EINVAL;
+ /* let the vqs know what has been configured */ + actual_features = ops->get_driver_features(vdpa); + for (i = 0; i < d->nvqs; ++i) { + struct vhost_virtqueue *vq = d->vqs[i]; + + mutex_lock(&vq->mutex); + vq->acked_features = actual_features; + mutex_unlock(&vq->mutex); + } + return 0; }
From: Andrey Smetanin asmetanin@yandex-team.ru
[ Upstream commit 1f5d2e3bab16369d5d4b4020a25db4ab1f4f082c ]
Fix possible virtqueue used buffers leak and corresponding stuck in case of temporary -EIO from sendmsg() which is produced by tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx to pass packet data (that is update used_idx in corresponding vhost_zerocopy_signal_used()) as if packet data has been transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN in case of fake successful transmit.
Signed-off-by: Andrey Smetanin asmetanin@yandex-team.ru Message-Id: 20230424204411.24888-1-asmetanin@yandex-team.ru Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Andrey Smetanin asmetanin@yandex-team.ru Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/net.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 4c538b30fd76d..4418192ab8aaa 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -934,13 +934,18 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock)
err = sock->ops->sendmsg(sock, &msg, len); if (unlikely(err < 0)) { + bool retry = err == -EAGAIN || err == -ENOMEM || err == -ENOBUFS; + if (zcopy_used) { if (vq->heads[ubuf->desc].len == VHOST_DMA_IN_PROGRESS) vhost_net_ubuf_put(ubufs); - nvq->upend_idx = ((unsigned)nvq->upend_idx - 1) - % UIO_MAXIOV; + if (retry) + nvq->upend_idx = ((unsigned)nvq->upend_idx - 1) + % UIO_MAXIOV; + else + vq->heads[ubuf->desc].len = VHOST_DMA_DONE_LEN; } - if (err == -EAGAIN || err == -ENOMEM || err == -ENOBUFS) { + if (retry) { vhost_discard_vq_desc(vq, 1); vhost_net_enable_vq(net, vq); break;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin