From: Philipp Zabel p.zabel@pengutronix.de
[ Upstream commit 4fb873c9648e383206e0a91cef9b03aa54066aca ]
This patch fixes backtraces like the following when sending SIGKILL to a process with a currently pending plane update:
[drm:ipu_plane_atomic_check] CRTC should be enabled [drm:drm_framebuffer_remove] *ERROR* failed to commit ------------[ cut here ]------------ WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498 atomic remove_fb failed with -22
Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/imx/ipuv3-plane.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 203f247d4854..a323a0db2fc1 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -375,9 +375,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if (ret) return ret;
- /* CRTC should be enabled */ + /* nothing to check when disabling or disabled */ if (!crtc_state->enable) - return -EINVAL; + return 0;
switch (plane->type) { case DRM_PLANE_TYPE_PRIMARY:
From: Alexander Shiyan shc_work@mail.ru
[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ]
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan shc_work@mail.ru Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/ipu-v3/ipu-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index 474b00e19697..5b7cdbfe062f 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -898,8 +898,8 @@ static struct ipu_devtype ipu_type_imx51 = { .cpmem_ofs = 0x1f000000, .srm_ofs = 0x1f040000, .tpm_ofs = 0x1f060000, - .csi0_ofs = 0x1f030000, - .csi1_ofs = 0x1f038000, + .csi0_ofs = 0x1e030000, + .csi1_ofs = 0x1e038000, .ic_ofs = 0x1e020000, .disp0_ofs = 0x1e040000, .disp1_ofs = 0x1e048000,
From: Julia Lawall Julia.Lawall@lip6.fr
[ Upstream commit aa3312012f103f91f123600bbf768b11c8f431bc ]
The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put.
Move the initialization channel->child = child; down to just before the call to imx_ldb_register so that intervening failures don't need to clear it. Add a label at the end of the function to do all the of_node_puts.
The semantic patch that finds part of this problem is as follows (http://coccinelle.lip6.fr):
// <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@
for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // </smpl>
Signed-off-by: Julia Lawall Julia.Lawall@lip6.fr Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/imx/imx-ldb.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 3bd0f8a18e74..42daa5c9ff8e 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -651,8 +651,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) int bus_format;
ret = of_property_read_u32(child, "reg", &i); - if (ret || i < 0 || i > 1) - return -EINVAL; + if (ret || i < 0 || i > 1) { + ret = -EINVAL; + goto free_child; + }
if (!of_device_is_available(child)) continue; @@ -665,7 +667,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) channel = &imx_ldb->channel[i]; channel->ldb = imx_ldb; channel->chno = i; - channel->child = child;
/* * The output port is port@4 with an external 4-port mux or @@ -675,13 +676,13 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) imx_ldb->lvds_mux ? 4 : 2, 0, &channel->panel, &channel->bridge); if (ret && ret != -ENODEV) - return ret; + goto free_child;
/* panel ddc only if there is no bridge */ if (!channel->bridge) { ret = imx_ldb_panel_ddc(dev, channel, child); if (ret) - return ret; + goto free_child; }
bus_format = of_get_bus_format(dev, child); @@ -697,18 +698,26 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) if (bus_format < 0) { dev_err(dev, "could not determine data mapping: %d\n", bus_format); - return bus_format; + ret = bus_format; + goto free_child; } channel->bus_format = bus_format; + channel->child = child;
ret = imx_ldb_register(drm, channel); - if (ret) - return ret; + if (ret) { + channel->child = NULL; + goto free_child; + } }
dev_set_drvdata(dev, imx_ldb);
return 0; + +free_child: + of_node_put(child); + return ret; }
static void imx_ldb_unbind(struct device *dev, struct device *master,
From: Steve Longerbeam slongerbeam@gmail.com
[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ]
The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam slongerbeam@gmail.com Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/ipu-v3/ipu-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index 5b7cdbfe062f..0a7d4395d427 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -914,8 +914,8 @@ static struct ipu_devtype ipu_type_imx53 = { .cpmem_ofs = 0x07000000, .srm_ofs = 0x07040000, .tpm_ofs = 0x07060000, - .csi0_ofs = 0x07030000, - .csi1_ofs = 0x07038000, + .csi0_ofs = 0x06030000, + .csi1_ofs = 0x06038000, .ic_ofs = 0x06020000, .disp0_ofs = 0x06040000, .disp1_ofs = 0x06048000,
From: Shuming Fan shumingf@realtek.com
[ Upstream commit 8077ec011b1ea26abb7ca786f28ecccfb352717f ]
AD/DA ASRC function control two ASRC clock sources separately. Whether AD/DA filter select which clock source, we enable AD/DA ASRC function for all cases.
Signed-off-by: Shuming Fan shumingf@realtek.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5682.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index afe7d5b19313..79ebcc239786 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -1757,7 +1757,9 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = { {"ADC Stereo1 Filter", NULL, "ADC STO1 ASRC", is_using_asrc}, {"DAC Stereo1 Filter", NULL, "DAC STO1 ASRC", is_using_asrc}, {"ADC STO1 ASRC", NULL, "AD ASRC"}, + {"ADC STO1 ASRC", NULL, "DA ASRC"}, {"ADC STO1 ASRC", NULL, "CLKDET"}, + {"DAC STO1 ASRC", NULL, "AD ASRC"}, {"DAC STO1 ASRC", NULL, "DA ASRC"}, {"DAC STO1 ASRC", NULL, "CLKDET"},
From: Tony Lindgren tony@atomide.com
[ Upstream commit 983a5a43ec254cd5ddf3254db80ca96e8f8bb2a4 ]
Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer where we now try to reparent the clock to itself with the following:
omap_dm_timer_of_set_source: failed to set parent
With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. So we should be able to remove omap_dm_timer_of_set_source with clean-up patches later on. But for now, let's just fix it first by checking if parent and fck are the same and bail out of so.
Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski bgolaszewski@baylibre.com Cc: Daniel Lezcano daniel.lezcano@linaro.org Cc: H. Nikolaus Schaller hns@goldelico.com Cc: Keerthy j-keerthy@ti.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Pavel Machek pavel@ucw.cz Cc: Sebastian Reichel sre@kernel.org Cc: Tero Kristo t-kristo@ti.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Thomas Gleixner tglx@linutronix.de Reported-by: H. Nikolaus Schaller hns@goldelico.com Tested-By: Andreas Kemnade andreas@kemnade.info Tested-By: H. Nikolaus Schaller hns@goldelico.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clocksource/timer-ti-dm.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c index 4cce6b224b87..3ecf84706640 100644 --- a/drivers/clocksource/timer-ti-dm.c +++ b/drivers/clocksource/timer-ti-dm.c @@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer) if (IS_ERR(parent)) return -ENODEV;
+ /* Bail out if both clocks point to fck */ + if (clk_is_match(parent, timer->fclk)) + return 0; + ret = clk_set_parent(timer->fclk, parent); if (ret < 0) pr_err("%s: failed to set parent\n", __func__);
From: Julien Thierry julien.thierry@arm.com
[ Upstream commit fc3bc475231e12e9c0142f60100cf84d077c79e1 ]
vgic_dist->lpi_list_lock must always be taken with interrupts disabled as it is used in interrupt context.
For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible.
Signed-off-by: Julien Thierry julien.thierry@arm.com Acked-by: Christoffer Dall christoffer.dall@arm.com Acked-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Christoffer Dall christoffer.dall@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/kvm/arm_vgic.h | 2 +- virt/kvm/arm/vgic/vgic-init.c | 2 +- virt/kvm/arm/vgic/vgic-its.c | 8 ++++---- virt/kvm/arm/vgic/vgic.c | 10 +++++----- 4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h index 4f31f96bbfab..90ac450745f1 100644 --- a/include/kvm/arm_vgic.h +++ b/include/kvm/arm_vgic.h @@ -256,7 +256,7 @@ struct vgic_dist { u64 propbaser;
/* Protects the lpi_list and the count value below. */ - spinlock_t lpi_list_lock; + raw_spinlock_t lpi_list_lock; struct list_head lpi_list_head; int lpi_list_count;
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c index c0c0b88af1d5..33e7ee814f7b 100644 --- a/virt/kvm/arm/vgic/vgic-init.c +++ b/virt/kvm/arm/vgic/vgic-init.c @@ -64,7 +64,7 @@ void kvm_vgic_early_init(struct kvm *kvm) struct vgic_dist *dist = &kvm->arch.vgic;
INIT_LIST_HEAD(&dist->lpi_list_head); - spin_lock_init(&dist->lpi_list_lock); + raw_spin_lock_init(&dist->lpi_list_lock); }
/* CREATION */ diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index 12502251727e..f376c82afb61 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c @@ -73,7 +73,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid, irq->target_vcpu = vcpu; irq->group = 1;
- spin_lock_irqsave(&dist->lpi_list_lock, flags); + raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
/* * There could be a race with another vgic_add_lpi(), so we need to @@ -101,7 +101,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid, dist->lpi_list_count++;
out_unlock: - spin_unlock_irqrestore(&dist->lpi_list_lock, flags); + raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
/* * We "cache" the configuration table entries in our struct vgic_irq's. @@ -339,7 +339,7 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr) if (!intids) return -ENOMEM;
- spin_lock_irqsave(&dist->lpi_list_lock, flags); + raw_spin_lock_irqsave(&dist->lpi_list_lock, flags); list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) { if (i == irq_count) break; @@ -348,7 +348,7 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr) continue; intids[i++] = irq->intid; } - spin_unlock_irqrestore(&dist->lpi_list_lock, flags); + raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
*intid_ptr = intids; return i; diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index f884a54b2601..c5165e3b80cb 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -72,7 +72,7 @@ static struct vgic_irq *vgic_get_lpi(struct kvm *kvm, u32 intid) struct vgic_irq *irq = NULL; unsigned long flags;
- spin_lock_irqsave(&dist->lpi_list_lock, flags); + raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) { if (irq->intid != intid) @@ -88,7 +88,7 @@ static struct vgic_irq *vgic_get_lpi(struct kvm *kvm, u32 intid) irq = NULL;
out_unlock: - spin_unlock_irqrestore(&dist->lpi_list_lock, flags); + raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
return irq; } @@ -138,15 +138,15 @@ void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq) if (irq->intid < VGIC_MIN_LPI) return;
- spin_lock_irqsave(&dist->lpi_list_lock, flags); + raw_spin_lock_irqsave(&dist->lpi_list_lock, flags); if (!kref_put(&irq->refcount, vgic_irq_release)) { - spin_unlock_irqrestore(&dist->lpi_list_lock, flags); + raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags); return; };
list_del(&irq->lpi_list); dist->lpi_list_count--; - spin_unlock_irqrestore(&dist->lpi_list_lock, flags); + raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
kfree(irq); }
From: Enric Balletbo i Serra enric.balletbo@collabora.com
[ Upstream commit 26cd8657c7e745686a4c54a5cccf721ede208a25 ]
Ports are described by child 'port' nodes contained in the device node. 'ports' is optional and is used to group all 'port' nodes which is not the case here.
This patch fixes the following warnings:
arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port'
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index 1ee0dc0d9f10..d1cf404b8708 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -22,7 +22,7 @@ backlight = <&backlight>; power-supply = <&pp3300_disp>;
- ports { + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 2cc7c47d6a85..65637a5a4b21 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -43,7 +43,7 @@ backlight = <&backlight>; power-supply = <&pp3300_disp>;
- ports { + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index fef2c0608999..b14d83919f14 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -50,7 +50,7 @@ pinctrl-0 = <&lcd_panel_reset>; power-supply = <&vcc3v3_s0>;
- ports { + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; };
From: Stefan Haberland sth@linux.ibm.com
[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ]
Dan Carpenter reported the following:
The patch 52898025cf7d: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning:
drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]'
drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake.
4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) {
kzalloc() returns a ZERO_SIZE_PTR (0x16).
4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len))
That all works great.
4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1];
But now we're assuming that "->psf_data_len" was at least 2 bytes.
Fix this by checking the user specified length psf_data_len.
Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Stefan Haberland sth@linux.ibm.com Signed-off-by: Martin Schwidefsky schwidefsky@de.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/block/dasd_eckd.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 4e7b55a14b1a..6e294b4d3635 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -4469,6 +4469,14 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp) usrparm.psf_data &= 0x7fffffffULL; usrparm.rssd_result &= 0x7fffffffULL; } + /* at least 2 bytes are accessed and should be allocated */ + if (usrparm.psf_data_len < 2) { + DBF_DEV_EVENT(DBF_WARNING, device, + "Symmetrix ioctl invalid data length %d", + usrparm.psf_data_len); + rc = -EINVAL; + goto out; + } /* alloc I/O data area */ psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
From: Jonathan Bakker xc-racer2@live.ca
[ Upstream commit 3ca232df9921f083c3b37ba5fbc76f4d9046268b ]
pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device.
Signed-off-by: Jonathan Bakker xc-racer2@live.ca Signed-off-by: Paweł Chmiel pawel.mikolaj.chmiel@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/pwm-vibra.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c index 55da191ae550..9df87431d7d4 100644 --- a/drivers/input/misc/pwm-vibra.c +++ b/drivers/input/misc/pwm-vibra.c @@ -34,6 +34,7 @@ struct pwm_vibrator { struct work_struct play_work; u16 level; u32 direction_duty_cycle; + bool vcc_on; };
static int pwm_vibrator_start(struct pwm_vibrator *vibrator) @@ -42,10 +43,13 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) struct pwm_state state; int err;
- err = regulator_enable(vibrator->vcc); - if (err) { - dev_err(pdev, "failed to enable regulator: %d", err); - return err; + if (!vibrator->vcc_on) { + err = regulator_enable(vibrator->vcc); + if (err) { + dev_err(pdev, "failed to enable regulator: %d", err); + return err; + } + vibrator->vcc_on = true; }
pwm_get_state(vibrator->pwm, &state); @@ -76,7 +80,10 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) { - regulator_disable(vibrator->vcc); + if (vibrator->vcc_on) { + regulator_disable(vibrator->vcc); + vibrator->vcc_on = false; + }
if (vibrator->pwm_dir) pwm_disable(vibrator->pwm_dir);
From: Paweł Chmiel pawel.mikolaj.chmiel@gmail.com
[ Upstream commit 94803aef3533676194c772383472636c453e3147 ]
This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start.
Signed-off-by: Paweł Chmiel pawel.mikolaj.chmiel@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/pwm-vibra.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c index 9df87431d7d4..dbb6d9e1b947 100644 --- a/drivers/input/misc/pwm-vibra.c +++ b/drivers/input/misc/pwm-vibra.c @@ -80,14 +80,14 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) { + if (vibrator->pwm_dir) + pwm_disable(vibrator->pwm_dir); + pwm_disable(vibrator->pwm); + if (vibrator->vcc_on) { regulator_disable(vibrator->vcc); vibrator->vcc_on = false; } - - if (vibrator->pwm_dir) - pwm_disable(vibrator->pwm_dir); - pwm_disable(vibrator->pwm); }
static void pwm_vibrator_play_work(struct work_struct *work)
From: Tony Lindgren tony@atomide.com
[ Upstream commit 0840242e887586268f665bf58d5e1a7d6ebf35ed ]
Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer for reparenting of the timer clock.
With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents.
Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski bgolaszewski@baylibre.com Cc: Daniel Lezcano daniel.lezcano@linaro.org Cc: H. Nikolaus Schaller hns@goldelico.com Cc: Keerthy j-keerthy@ti.com Cc: Ladislav Michl ladis@linux-mips.org Cc: Pavel Machek pavel@ucw.cz Cc: Sebastian Reichel sre@kernel.org Cc: Tero Kristo t-kristo@ti.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Thomas Gleixner tglx@linutronix.de Reported-by: H. Nikolaus Schaller hns@goldelico.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 04758a2a87f0..67d77eee9433 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -644,6 +644,17 @@ }; };
+/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + /* * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for * uart1 wakeirq.
From: Yizhuo yzhai003@ucr.edu
[ Upstream commit dc30e70391376ba3987aeb856ae6d9c0706534f1 ]
In function omap4_dsi_mux_pads(), local variable "reg" could be uninitialized if function regmap_read() returns -EINVAL. However, it will be used directly in the later context, which is potentially unsafe.
Signed-off-by: Yizhuo yzhai003@ucr.edu Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/display.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 9500b6e27380..5d73f2c0b117 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -83,6 +83,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) u32 enable_mask, enable_shift; u32 pipd_mask, pipd_shift; u32 reg; + int ret;
if (dsi_id == 0) { enable_mask = OMAP4_DSI1_LANEENABLE_MASK; @@ -98,7 +99,11 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return -ENODEV; }
- regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®); + ret = regmap_read(omap4_dsi_mux_syscon, + OMAP4_DSIPHY_SYSCON_OFFSET, + ®); + if (ret) + return ret;
reg &= ~enable_mask; reg &= ~pipd_mask;
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit c16e12010060c6c7a31f08b4a99513064cb53b7d ]
KASAN reports and additional traces point to out-of-bounds accesses to the dapm_up_seq and dapm_down_seq lookup tables. The indices used are larger than the array definition.
Fix by adding missing entries for the new widget types in these two lookup tables, and align them with PGA values.
Also the sequences for the following widgets were not defined. Since their values defaulted to zero, assign them explicitly
snd_soc_dapm_input snd_soc_dapm_output snd_soc_dapm_vmid snd_soc_dapm_siggen snd_soc_dapm_sink
Fixes: 8a70b4544ef4 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.'). Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-dapm.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 461d951917c0..0a2cf09cac92 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -71,12 +71,16 @@ static int dapm_up_seq[] = { [snd_soc_dapm_clock_supply] = 1, [snd_soc_dapm_supply] = 2, [snd_soc_dapm_micbias] = 3, + [snd_soc_dapm_vmid] = 3, [snd_soc_dapm_dai_link] = 2, [snd_soc_dapm_dai_in] = 4, [snd_soc_dapm_dai_out] = 4, [snd_soc_dapm_aif_in] = 4, [snd_soc_dapm_aif_out] = 4, [snd_soc_dapm_mic] = 5, + [snd_soc_dapm_siggen] = 5, + [snd_soc_dapm_input] = 5, + [snd_soc_dapm_output] = 5, [snd_soc_dapm_mux] = 6, [snd_soc_dapm_demux] = 6, [snd_soc_dapm_dac] = 7, @@ -84,11 +88,19 @@ static int dapm_up_seq[] = { [snd_soc_dapm_mixer] = 8, [snd_soc_dapm_mixer_named_ctl] = 8, [snd_soc_dapm_pga] = 9, + [snd_soc_dapm_buffer] = 9, + [snd_soc_dapm_scheduler] = 9, + [snd_soc_dapm_effect] = 9, + [snd_soc_dapm_src] = 9, + [snd_soc_dapm_asrc] = 9, + [snd_soc_dapm_encoder] = 9, + [snd_soc_dapm_decoder] = 9, [snd_soc_dapm_adc] = 10, [snd_soc_dapm_out_drv] = 11, [snd_soc_dapm_hp] = 11, [snd_soc_dapm_spk] = 11, [snd_soc_dapm_line] = 11, + [snd_soc_dapm_sink] = 11, [snd_soc_dapm_kcontrol] = 12, [snd_soc_dapm_post] = 13, }; @@ -101,13 +113,25 @@ static int dapm_down_seq[] = { [snd_soc_dapm_spk] = 3, [snd_soc_dapm_line] = 3, [snd_soc_dapm_out_drv] = 3, + [snd_soc_dapm_sink] = 3, [snd_soc_dapm_pga] = 4, + [snd_soc_dapm_buffer] = 4, + [snd_soc_dapm_scheduler] = 4, + [snd_soc_dapm_effect] = 4, + [snd_soc_dapm_src] = 4, + [snd_soc_dapm_asrc] = 4, + [snd_soc_dapm_encoder] = 4, + [snd_soc_dapm_decoder] = 4, [snd_soc_dapm_switch] = 5, [snd_soc_dapm_mixer_named_ctl] = 5, [snd_soc_dapm_mixer] = 5, [snd_soc_dapm_dac] = 6, [snd_soc_dapm_mic] = 7, + [snd_soc_dapm_siggen] = 7, + [snd_soc_dapm_input] = 7, + [snd_soc_dapm_output] = 7, [snd_soc_dapm_micbias] = 8, + [snd_soc_dapm_vmid] = 8, [snd_soc_dapm_mux] = 9, [snd_soc_dapm_demux] = 9, [snd_soc_dapm_aif_in] = 10,
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
[ Upstream commit d9111d36024de07784f2e1ba2ccf70b16035f378 ]
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue.
Fixes: commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by: Yusuke Goda yusuke.goda.sx@renesas.com Reported-by: Valentine Barshak valentine.barshak@cogentembedded.com Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Tested-by: Yusuke Goda yusuke.goda.sx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index a566dae3ec8a..9410e0a9b14b 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -283,7 +283,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, if (rsnd_ssi_is_multi_slave(mod, io)) return 0;
- if (ssi->usrcnt > 1) { + if (ssi->usrcnt > 0) { if (ssi->rate != rate) { dev_err(dev, "SSI parent/child should use same rate\n"); return -EINVAL;
From: Christoffer Dall christoffer.dall@arm.com
[ Upstream commit e761a927bc9a7ee6ceb7c4f63d5922dbced87f0d ]
We have two ways to reset a vcpu: - either through VCPU_INIT - or through a PSCI_ON call
The first one is easy to reason about. The second one is implemented in a more bizarre way, as it is the vcpu that handles PSCI_ON that resets the vcpu that is being powered-on. As we need to turn the logic around and have the target vcpu to reset itself, we must take some preliminary steps.
Resetting the VCPU state modifies the system register state in memory, but this may interact with vcpu_load/vcpu_put if running with preemption disabled, which in turn may lead to corrupted system register state.
Address this by disabling preemption and doing put/load if required around the reset logic.
Reviewed-by: Andrew Jones drjones@redhat.com Signed-off-by: Christoffer Dall christoffer.dall@arm.com Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kvm/reset.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index e37c78bbe1ca..644dd0050766 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -99,16 +99,33 @@ int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext) * This function finds the right table above and sets the registers on * the virtual CPU struct to their architecturally defined reset * values. + * + * Note: This function can be called from two paths: The KVM_ARM_VCPU_INIT + * ioctl or as part of handling a request issued by another VCPU in the PSCI + * handling code. In the first case, the VCPU will not be loaded, and in the + * second case the VCPU will be loaded. Because this function operates purely + * on the memory-backed valus of system registers, we want to do a full put if + * we were loaded (handling a request) and load the values back at the end of + * the function. Otherwise we leave the state alone. In both cases, we + * disable preemption around the vcpu reset as we would otherwise race with + * preempt notifiers which also call put/load. */ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { const struct kvm_regs *cpu_reset; + int ret = -EINVAL; + bool loaded; + + preempt_disable(); + loaded = (vcpu->cpu != -1); + if (loaded) + kvm_arch_vcpu_put(vcpu);
switch (vcpu->arch.target) { default: if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) { if (!cpu_has_32bit_el1()) - return -EINVAL; + goto out; cpu_reset = &default_regs_reset32; } else { cpu_reset = &default_regs_reset; @@ -131,5 +148,10 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) vcpu->arch.workaround_flags |= VCPU_WORKAROUND_2_FLAG;
/* Reset timer */ - return kvm_timer_vcpu_reset(vcpu); + ret = kvm_timer_vcpu_reset(vcpu); +out: + if (loaded) + kvm_arch_vcpu_load(vcpu, smp_processor_id()); + preempt_enable(); + return ret; }
From: Marc Zyngier marc.zyngier@arm.com
[ Upstream commit 358b28f09f0ab074d781df72b8a671edb1547789 ]
The current kvm_psci_vcpu_on implementation will directly try to manipulate the state of the VCPU to reset it. However, since this is not done on the thread that runs the VCPU, we can end up in a strangely corrupted state when the source and target VCPUs are running at the same time.
Fix this by factoring out all reset logic from the PSCI implementation and forwarding the required information along with a request to the target VCPU.
Reviewed-by: Andrew Jones drjones@redhat.com Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Christoffer Dall christoffer.dall@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/include/asm/kvm_host.h | 10 +++++++++ arch/arm/kvm/reset.c | 24 +++++++++++++++++++++ arch/arm64/include/asm/kvm_host.h | 11 ++++++++++ arch/arm64/kvm/reset.c | 24 +++++++++++++++++++++ virt/kvm/arm/arm.c | 10 +++++++++ virt/kvm/arm/psci.c | 36 ++++++++++++++----------------- 6 files changed, 95 insertions(+), 20 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 3ad482d2f1eb..d0d0227fc70d 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -48,6 +48,7 @@ #define KVM_REQ_SLEEP \ KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_IRQ_PENDING KVM_ARCH_REQ(1) +#define KVM_REQ_VCPU_RESET KVM_ARCH_REQ(2)
DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
@@ -147,6 +148,13 @@ struct kvm_cpu_context {
typedef struct kvm_cpu_context kvm_cpu_context_t;
+struct vcpu_reset_state { + unsigned long pc; + unsigned long r0; + bool be; + bool reset; +}; + struct kvm_vcpu_arch { struct kvm_cpu_context ctxt;
@@ -186,6 +194,8 @@ struct kvm_vcpu_arch { /* Cache some mmu pages needed inside spinlock regions */ struct kvm_mmu_memory_cache mmu_page_cache;
+ struct vcpu_reset_state reset_state; + /* Detect first run of a vcpu */ bool has_run_once; }; diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 5ed0c3ee33d6..e53327912adc 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -26,6 +26,7 @@ #include <asm/cputype.h> #include <asm/kvm_arm.h> #include <asm/kvm_coproc.h> +#include <asm/kvm_emulate.h>
#include <kvm/arm_arch_timer.h>
@@ -69,6 +70,29 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) /* Reset CP15 registers */ kvm_reset_coprocs(vcpu);
+ /* + * Additional reset state handling that PSCI may have imposed on us. + * Must be done after all the sys_reg reset. + */ + if (READ_ONCE(vcpu->arch.reset_state.reset)) { + unsigned long target_pc = vcpu->arch.reset_state.pc; + + /* Gracefully handle Thumb2 entry point */ + if (target_pc & 1) { + target_pc &= ~1UL; + vcpu_set_thumb(vcpu); + } + + /* Propagate caller endianness */ + if (vcpu->arch.reset_state.be) + kvm_vcpu_set_be(vcpu); + + *vcpu_pc(vcpu) = target_pc; + vcpu_set_reg(vcpu, 0, vcpu->arch.reset_state.r0); + + vcpu->arch.reset_state.reset = false; + } + /* Reset arch_timer context */ return kvm_timer_vcpu_reset(vcpu); } diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 3d6d7336f871..6abe4002945f 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -48,6 +48,7 @@ #define KVM_REQ_SLEEP \ KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_IRQ_PENDING KVM_ARCH_REQ(1) +#define KVM_REQ_VCPU_RESET KVM_ARCH_REQ(2)
DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
@@ -206,6 +207,13 @@ struct kvm_cpu_context {
typedef struct kvm_cpu_context kvm_cpu_context_t;
+struct vcpu_reset_state { + unsigned long pc; + unsigned long r0; + bool be; + bool reset; +}; + struct kvm_vcpu_arch { struct kvm_cpu_context ctxt;
@@ -295,6 +303,9 @@ struct kvm_vcpu_arch { /* Virtual SError ESR to restore when HCR_EL2.VSE is set */ u64 vsesr_el2;
+ /* Additional reset state */ + struct vcpu_reset_state reset_state; + /* True when deferrable sysregs are loaded on the physical CPU, * see kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs. */ bool sysregs_loaded_on_cpu; diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index 644dd0050766..18b9a522a2b3 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -31,6 +31,7 @@ #include <asm/kvm_arm.h> #include <asm/kvm_asm.h> #include <asm/kvm_coproc.h> +#include <asm/kvm_emulate.h> #include <asm/kvm_mmu.h>
/* @@ -140,6 +141,29 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) /* Reset system registers */ kvm_reset_sys_regs(vcpu);
+ /* + * Additional reset state handling that PSCI may have imposed on us. + * Must be done after all the sys_reg reset. + */ + if (vcpu->arch.reset_state.reset) { + unsigned long target_pc = vcpu->arch.reset_state.pc; + + /* Gracefully handle Thumb2 entry point */ + if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) { + target_pc &= ~1UL; + vcpu_set_thumb(vcpu); + } + + /* Propagate caller endianness */ + if (vcpu->arch.reset_state.be) + kvm_vcpu_set_be(vcpu); + + *vcpu_pc(vcpu) = target_pc; + vcpu_set_reg(vcpu, 0, vcpu->arch.reset_state.r0); + + vcpu->arch.reset_state.reset = false; + } + /* Reset PMU */ kvm_pmu_vcpu_reset(vcpu);
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c index 91495045ad5a..1415e36fed3d 100644 --- a/virt/kvm/arm/arm.c +++ b/virt/kvm/arm/arm.c @@ -624,6 +624,13 @@ static void vcpu_req_sleep(struct kvm_vcpu *vcpu) /* Awaken to handle a signal, request we sleep again later. */ kvm_make_request(KVM_REQ_SLEEP, vcpu); } + + /* + * Make sure we will observe a potential reset request if we've + * observed a change to the power state. Pairs with the smp_wmb() in + * kvm_psci_vcpu_on(). + */ + smp_rmb(); }
static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) @@ -637,6 +644,9 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu) if (kvm_check_request(KVM_REQ_SLEEP, vcpu)) vcpu_req_sleep(vcpu);
+ if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu)) + kvm_reset_vcpu(vcpu); + /* * Clear IRQ_PENDING requests that were made to guarantee * that a VCPU sees new virtual interrupts. diff --git a/virt/kvm/arm/psci.c b/virt/kvm/arm/psci.c index 9b73d3ad918a..34d08ee63747 100644 --- a/virt/kvm/arm/psci.c +++ b/virt/kvm/arm/psci.c @@ -104,12 +104,10 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { + struct vcpu_reset_state *reset_state; struct kvm *kvm = source_vcpu->kvm; struct kvm_vcpu *vcpu = NULL; - struct swait_queue_head *wq; unsigned long cpu_id; - unsigned long context_id; - phys_addr_t target_pc;
cpu_id = smccc_get_arg1(source_vcpu) & MPIDR_HWID_BITMASK; if (vcpu_mode_is_32bit(source_vcpu)) @@ -130,32 +128,30 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) return PSCI_RET_INVALID_PARAMS; }
- target_pc = smccc_get_arg2(source_vcpu); - context_id = smccc_get_arg3(source_vcpu); + reset_state = &vcpu->arch.reset_state;
- kvm_reset_vcpu(vcpu); - - /* Gracefully handle Thumb2 entry point */ - if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) { - target_pc &= ~((phys_addr_t) 1); - vcpu_set_thumb(vcpu); - } + reset_state->pc = smccc_get_arg2(source_vcpu);
/* Propagate caller endianness */ - if (kvm_vcpu_is_be(source_vcpu)) - kvm_vcpu_set_be(vcpu); + reset_state->be = kvm_vcpu_is_be(source_vcpu);
- *vcpu_pc(vcpu) = target_pc; /* * NOTE: We always update r0 (or x0) because for PSCI v0.1 * the general puspose registers are undefined upon CPU_ON. */ - smccc_set_retval(vcpu, context_id, 0, 0, 0); - vcpu->arch.power_off = false; - smp_mb(); /* Make sure the above is visible */ + reset_state->r0 = smccc_get_arg3(source_vcpu); + + WRITE_ONCE(reset_state->reset, true); + kvm_make_request(KVM_REQ_VCPU_RESET, vcpu);
- wq = kvm_arch_vcpu_wq(vcpu); - swake_up_one(wq); + /* + * Make sure the reset request is observed if the change to + * power_state is observed. + */ + smp_wmb(); + + vcpu->arch.power_off = false; + kvm_vcpu_wake_up(vcpu);
return PSCI_RET_SUCCESS; }
From: Marc Zyngier marc.zyngier@arm.com
[ Upstream commit 20589c8cc47dce5854c8bf1b44a9fc63d798d26d ]
Failing to properly reset system registers is pretty bad. But not quite as bad as bringing the whole machine down... So warn loudly, but slightly more gracefully.
Signed-off-by: Marc Zyngier marc.zyngier@arm.com Acked-by: Christoffer Dall christoffer.dall@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/kvm/coproc.c | 4 ++-- arch/arm64/kvm/sys_regs.c | 8 +++++--- 2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index cb094e55dc5f..fd6cde23bb5d 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -1450,6 +1450,6 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) reset_coproc_regs(vcpu, table, num);
for (num = 1; num < NR_CP15_REGS; num++) - if (vcpu_cp15(vcpu, num) == 0x42424242) - panic("Didn't reset vcpu_cp15(vcpu, %zi)", num); + WARN(vcpu_cp15(vcpu, num) == 0x42424242, + "Didn't reset vcpu_cp15(vcpu, %zi)", num); } diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 22fbbdbece3c..fe18e68f9a20 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -2586,7 +2586,9 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu) table = get_target_table(vcpu->arch.target, true, &num); reset_sys_reg_descs(vcpu, table, num);
- for (num = 1; num < NR_SYS_REGS; num++) - if (__vcpu_sys_reg(vcpu, num) == 0x4242424242424242) - panic("Didn't reset __vcpu_sys_reg(%zi)", num); + for (num = 1; num < NR_SYS_REGS; num++) { + if (WARN(__vcpu_sys_reg(vcpu, num) == 0x4242424242424242, + "Didn't reset __vcpu_sys_reg(%zi)\n", num)) + break; + } }
From: Christoffer Dall christoffer.dall@arm.com
[ Upstream commit ab2d5eb03dbb7b37a1c6356686fb48626ab0c93e ]
We currently initialize the group of private IRQs during kvm_vgic_vcpu_init, and the value of the group depends on the GIC model we are emulating. However, CPUs created before creating (and initializing) the VGIC might end up with the wrong group if the VGIC is created as GICv3 later.
Since we have no enforced ordering of creating the VGIC and creating VCPUs, we can end up with part the VCPUs being properly intialized and the remaining incorrectly initialized. That also means that we have no single place to do the per-cpu data structure initialization which depends on knowing the emulated GIC model (which is only the group field).
This patch removes the incorrect comment from kvm_vgic_vcpu_init and initializes the group of all previously created VCPUs's private interrupts in vgic_init in addition to the existing initialization in kvm_vgic_vcpu_init.
Signed-off-by: Christoffer Dall christoffer.dall@arm.com Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- virt/kvm/arm/vgic/vgic-init.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c index 33e7ee814f7b..8196e4f8731f 100644 --- a/virt/kvm/arm/vgic/vgic-init.c +++ b/virt/kvm/arm/vgic/vgic-init.c @@ -231,13 +231,6 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu) irq->config = VGIC_CONFIG_LEVEL; }
- /* - * GICv3 can only be created via the KVM_DEVICE_CREATE API and - * so we always know the emulation type at this point as it's - * either explicitly configured as GICv3, or explicitly - * configured as GICv2, or not configured yet which also - * implies GICv2. - */ if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) irq->group = 1; else @@ -281,7 +274,7 @@ int vgic_init(struct kvm *kvm) { struct vgic_dist *dist = &kvm->arch.vgic; struct kvm_vcpu *vcpu; - int ret = 0, i; + int ret = 0, i, idx;
if (vgic_initialized(kvm)) return 0; @@ -298,6 +291,19 @@ int vgic_init(struct kvm *kvm) if (ret) goto out;
+ /* Initialize groups on CPUs created before the VGIC type was known */ + kvm_for_each_vcpu(idx, vcpu, kvm) { + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + + for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) { + struct vgic_irq *irq = &vgic_cpu->private_irqs[i]; + if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) + irq->group = 1; + else + irq->group = 0; + } + } + if (vgic_has_its(kvm)) { ret = vgic_v4_init(kvm); if (ret)
From: James Morse james.morse@arm.com
[ Upstream commit 7d82602909ed9c73b34ad26f05d10db4850a4f8c ]
On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text.
__hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic.
echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8"
# lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474 Info: Placing fdt at 0x8fe00000 - 0x8fffffff Info: virtio-mmio.devices=0x200@0x10000:36
Info: virtio-mmio.devices=0x200@0x10200:37
Info: virtio-mmio.devices=0x200@0x10400:38
[ 614.178186] Kernel panic - not syncing: HYP panic: [ 614.178186] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.178186] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.178186] VCPU:00000000f8de32f1 [ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799 [ 614.178446] Call trace: [ 614.178480] dump_backtrace+0x0/0x148 [ 614.178567] show_stack+0x24/0x30 [ 614.178658] dump_stack+0x90/0xb4 [ 614.178710] panic+0x13c/0x2d8 [ 614.178793] hyp_panic+0xac/0xd8 [ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0 [ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798 [ 614.179038] kvm_vcpu_ioctl+0x360/0x898 [ 614.179087] do_vfs_ioctl+0xc4/0x858 [ 614.179174] ksys_ioctl+0x84/0xb8 [ 614.179261] __arm64_sys_ioctl+0x28/0x38 [ 614.179348] el0_svc_common+0x94/0x108 [ 614.179401] el0_svc_handler+0x38/0x78 [ 614.179487] el0_svc+0x8/0xc [ 614.179558] SMP: stopping secondary CPUs [ 614.179661] Kernel Offset: disabled [ 614.179695] CPU features: 0x003,2a80aa38 [ 614.179758] Memory Limit: none [ 614.179858] ---[ end Kernel panic - not syncing: HYP panic: [ 614.179858] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.179858] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.179858] VCPU:00000000f8de32f1 ]---
Annotate the VHE world-switch functions that aren't marked __hyp_text using NOKPROBE_SYMBOL().
Signed-off-by: James Morse james.morse@arm.com Fixes: 3f5c90b890ac ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run") Acked-by: Masami Hiramatsu mhiramat@kernel.org Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kvm/hyp/switch.c | 5 +++++ arch/arm64/kvm/hyp/sysreg-sr.c | 5 +++++ 2 files changed, 10 insertions(+)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index a1c32c1f2267..6290a4e81d57 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -23,6 +23,7 @@ #include <kvm/arm_psci.h>
#include <asm/cpufeature.h> +#include <asm/kprobes.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> #include <asm/kvm_host.h> @@ -107,6 +108,7 @@ static void activate_traps_vhe(struct kvm_vcpu *vcpu)
write_sysreg(kvm_get_hyp_vector(), vbar_el1); } +NOKPROBE_SYMBOL(activate_traps_vhe);
static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu) { @@ -146,6 +148,7 @@ static void deactivate_traps_vhe(void) write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1); write_sysreg(vectors, vbar_el1); } +NOKPROBE_SYMBOL(deactivate_traps_vhe);
static void __hyp_text __deactivate_traps_nvhe(void) { @@ -529,6 +532,7 @@ int kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
return exit_code; } +NOKPROBE_SYMBOL(kvm_vcpu_run_vhe);
/* Switch to the guest for legacy non-VHE systems */ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu) @@ -636,6 +640,7 @@ static void __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par, read_sysreg_el2(esr), read_sysreg_el2(far), read_sysreg(hpfar_el2), par, vcpu); } +NOKPROBE_SYMBOL(__hyp_call_panic_vhe);
void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt) { diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index 9ce223944983..963d669ae3a2 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -18,6 +18,7 @@ #include <linux/compiler.h> #include <linux/kvm_host.h>
+#include <asm/kprobes.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> #include <asm/kvm_hyp.h> @@ -98,12 +99,14 @@ void sysreg_save_host_state_vhe(struct kvm_cpu_context *ctxt) { __sysreg_save_common_state(ctxt); } +NOKPROBE_SYMBOL(sysreg_save_host_state_vhe);
void sysreg_save_guest_state_vhe(struct kvm_cpu_context *ctxt) { __sysreg_save_common_state(ctxt); __sysreg_save_el2_return_state(ctxt); } +NOKPROBE_SYMBOL(sysreg_save_guest_state_vhe);
static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctxt) { @@ -171,12 +174,14 @@ void sysreg_restore_host_state_vhe(struct kvm_cpu_context *ctxt) { __sysreg_restore_common_state(ctxt); } +NOKPROBE_SYMBOL(sysreg_restore_host_state_vhe);
void sysreg_restore_guest_state_vhe(struct kvm_cpu_context *ctxt) { __sysreg_restore_common_state(ctxt); __sysreg_restore_el2_return_state(ctxt); } +NOKPROBE_SYMBOL(sysreg_restore_guest_state_vhe);
void __hyp_text __sysreg32_save_state(struct kvm_vcpu *vcpu) {
From: Sylwester Nawrocki s.nawrocki@samsung.com
[ Upstream commit 860b454c2c0cbda6892954f5cdbbb48931b3c8db ]
This patch moves clk_get_rate() call from trigger() to hw_params() callback to avoid calling sleeping clk API from atomic context and prevent deadlock as indicated below.
Before this change clk_get_rate() was being called with same spinlock held as the one passed to the clk API when registering clocks exposed by the I2S driver.
[ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test [ 82.124235] 3 locks held by speaker-test/1554: [ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38 [ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268 [ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.154650] irq event stamp: 8144 [ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c [ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58 [ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c [ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168 [ 82.188964] Preemption disabled at: [ 82.188967] [<00000000>] (null) [ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191 [ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14) [ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8) [ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8) [ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c) [ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24) [ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec) [ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c) [ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4) [ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140) [ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30) [ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78) [ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268) [ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec) [ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60) [ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) [ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0) [ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80 [ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000 [ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c [ 82.355789] [ 82.357245] ====================================================== [ 82.363397] WARNING: possible circular locking dependency detected [ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W [ 82.376395] ------------------------------------------------------ [ 82.382548] speaker-test/1554 is trying to acquire lock: [ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec [ 82.394593] [ 82.394593] but task is already holding lock: [ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.408197] [ 82.408197] which lock already depends on the new lock. [ 82.416343] [ 82.416343] the existing dependency chain (in reverse order) is: [ 82.423795] [ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}: [ 82.430472] clk_mux_set_parent+0x34/0xb8 [ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c [ 82.440347] clk_set_parent+0x38/0x6c [ 82.444509] of_clk_set_defaults+0xc8/0x308 [ 82.449186] of_clk_add_provider+0x84/0xd0 [ 82.453779] samsung_i2s_probe+0x408/0x5f8 [ 82.458376] platform_drv_probe+0x48/0x98 [ 82.462879] really_probe+0x224/0x3f4 [ 82.467037] driver_probe_device+0x70/0x1c4 [ 82.471716] bus_for_each_drv+0x44/0x8c [ 82.476049] __device_attach+0xa0/0x138 [ 82.480382] bus_probe_device+0x88/0x90 [ 82.484715] deferred_probe_work_func+0x6c/0xbc [ 82.489741] process_one_work+0x200/0x740 [ 82.494246] worker_thread+0x2c/0x4c8 [ 82.498408] kthread+0x128/0x164 [ 82.502131] ret_from_fork+0x14/0x20 [ 82.506204] (null) [ 82.508976] [ 82.508976] -> #0 (prepare_lock){+.+.}: [ 82.514264] __mutex_lock+0x60/0xa3c [ 82.518336] mutex_lock_nested+0x1c/0x24 [ 82.522756] clk_prepare_lock+0x78/0xec [ 82.527088] clk_core_get_rate+0xc/0x5c [ 82.531421] i2s_trigger+0x490/0x6d4 [ 82.535494] soc_pcm_trigger+0x100/0x140 [ 82.539913] snd_pcm_do_start+0x2c/0x30 [ 82.544246] snd_pcm_action_single+0x38/0x78 [ 82.549012] snd_pcm_ioctl+0x910/0x1268 [ 82.553345] do_vfs_ioctl+0x90/0x9ec [ 82.557417] ksys_ioctl+0x34/0x60 [ 82.561229] ret_fast_syscall+0x0/0x28 [ 82.565477] 0xbeea384c [ 82.568421] [ 82.568421] other info that might help us debug this: [ 82.568421] [ 82.576394] Possible unsafe locking scenario: [ 82.576394] [ 82.582285] CPU0 CPU1 [ 82.586792] ---- ---- [ 82.591297] lock(&(&pri_dai->spinlock)->rlock); [ 82.595977] lock(prepare_lock); [ 82.601782] lock(&(&pri_dai->spinlock)->rlock); [ 82.608975] lock(prepare_lock); [ 82.612268] [ 82.612268] *** DEADLOCK ***
Fixes: 647d04f8e07a ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined") Reported-by: Krzysztof Kozłowski krzk@kernel.org Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/samsung/i2s.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index d6c62aa13041..ce00fe2f6aae 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -700,6 +700,7 @@ static int i2s_hw_params(struct snd_pcm_substream *substream, { struct i2s_dai *i2s = to_info(dai); u32 mod, mask = 0, val = 0; + struct clk *rclksrc; unsigned long flags;
WARN_ON(!pm_runtime_active(dai->dev)); @@ -782,6 +783,10 @@ static int i2s_hw_params(struct snd_pcm_substream *substream,
i2s->frmclk = params_rate(params);
+ rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC]; + if (rclksrc && !IS_ERR(rclksrc)) + i2s->rclk_srcrate = clk_get_rate(rclksrc); + return 0; }
@@ -886,11 +891,6 @@ static int config_setup(struct i2s_dai *i2s) return 0;
if (!(i2s->quirks & QUIRK_NO_MUXPSR)) { - struct clk *rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC]; - - if (rclksrc && !IS_ERR(rclksrc)) - i2s->rclk_srcrate = clk_get_rate(rclksrc); - psr = i2s->rclk_srcrate / i2s->frmclk / rfs; writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR); dev_dbg(&i2s->pdev->dev,
From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit 50d6b3cf9403879911e06d69c7ef41e43f8f7b4b ]
If we have a kernel configured for periodic timer interrupts, and we have cpuidle enabled, then we end up with CPU1 losing timer interupts after a hotplug.
This can manifest itself in RCU stall warnings, or userspace becoming unresponsive.
The problem is that the kernel initially wants to use the TWD timer for interrupts, but the TWD loses context when we enter the C3 cpuidle state. Nothing reprograms the TWD after idle.
We have solved this in the past by switching to broadcast timer ticks, and cpuidle44xx switches to that mode at boot time. However, there is nothing to switch from periodic mode local timers after a hotplug operation.
We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one would expect would take care of the issue, but internally this only deals with one-shot local timers - tick_broadcast_enable() on the other hand only deals with periodic local timers. So, we need to call both.
Signed-off-by: Russell King rmk+kernel@armlinux.org.uk [tony@atomide.com: just standardized the subject line] Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/cpuidle44xx.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index a8b291f00109..dae514c8276a 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -152,6 +152,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) && (cx->mpu_logic_state == PWRDM_POWER_OFF);
+ /* Enter broadcast mode for periodic timers */ + tick_broadcast_enable(); + + /* Enter broadcast mode for one-shot timers */ tick_broadcast_enter();
/* @@ -218,15 +222,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, return index; }
-/* - * For each cpu, setup the broadcast timer because local timers - * stops for the states above C1. - */ -static void omap_setup_broadcast_timer(void *arg) -{ - tick_broadcast_enable(); -} - static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, @@ -319,8 +314,5 @@ int __init omap4_idle_init(void) if (!cpu_clkdm[0] || !cpu_clkdm[1]) return -ENODEV;
- /* Configure the broadcast timer on each cpu */ - on_each_cpu(omap_setup_broadcast_timer, NULL, 1); - return cpuidle_register(idle_driver, cpu_online_mask); }
From: Dmitry Torokhov dmitry.torokhov@gmail.com
[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ]
Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it.
As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind.
Reported-by: Sven Van Asbroeck thesven73@gmail.com Reviewed-by: Sven Van Asbroeck TheSven73@googlemail.com Acked-by: Jacek Anaszewski jacek.anaszewski@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/keyboard/cap11xx.c | 35 ++++++++++---------------------- 1 file changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c index 312916f99597..73686c2460ce 100644 --- a/drivers/input/keyboard/cap11xx.c +++ b/drivers/input/keyboard/cap11xx.c @@ -75,9 +75,7 @@ struct cap11xx_led { struct cap11xx_priv *priv; struct led_classdev cdev; - struct work_struct work; u32 reg; - enum led_brightness new_brightness; }; #endif
@@ -233,30 +231,21 @@ static void cap11xx_input_close(struct input_dev *idev) }
#ifdef CONFIG_LEDS_CLASS -static void cap11xx_led_work(struct work_struct *work) +static int cap11xx_led_set(struct led_classdev *cdev, + enum led_brightness value) { - struct cap11xx_led *led = container_of(work, struct cap11xx_led, work); + struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); struct cap11xx_priv *priv = led->priv; - int value = led->new_brightness;
/* - * All LEDs share the same duty cycle as this is a HW limitation. - * Brightness levels per LED are either 0 (OFF) and 1 (ON). + * All LEDs share the same duty cycle as this is a HW + * limitation. Brightness levels per LED are either + * 0 (OFF) and 1 (ON). */ - regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL, - BIT(led->reg), value ? BIT(led->reg) : 0); -} - -static void cap11xx_led_set(struct led_classdev *cdev, - enum led_brightness value) -{ - struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); - - if (led->new_brightness == value) - return; - - led->new_brightness = value; - schedule_work(&led->work); + return regmap_update_bits(priv->regmap, + CAP11XX_REG_LED_OUTPUT_CONTROL, + BIT(led->reg), + value ? BIT(led->reg) : 0); }
static int cap11xx_init_leds(struct device *dev, @@ -299,7 +288,7 @@ static int cap11xx_init_leds(struct device *dev, led->cdev.default_trigger = of_get_property(child, "linux,default-trigger", NULL); led->cdev.flags = 0; - led->cdev.brightness_set = cap11xx_led_set; + led->cdev.brightness_set_blocking = cap11xx_led_set; led->cdev.max_brightness = 1; led->cdev.brightness = LED_OFF;
@@ -312,8 +301,6 @@ static int cap11xx_init_leds(struct device *dev, led->reg = reg; led->priv = priv;
- INIT_WORK(&led->work, cap11xx_led_work); - error = devm_led_classdev_register(dev, &led->cdev); if (error) { of_node_put(child);
From: Dmitry Torokhov dmitry.torokhov@gmail.com
[ Upstream commit 33a841ce5cef4ca6c18ad333248b6d273f54c839 ]
To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port.
Reported-by: Sven Van Asbroeck thesven73@gmail.com Acked-by: Danilo Krummrich danilokrummrich@dk-develop.de Reviewed-by: Sven Van Asbroeck TheSven73@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/ps2-gpio.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c index c62cceb97bb1..5e8d8384aa2a 100644 --- a/drivers/input/serio/ps2-gpio.c +++ b/drivers/input/serio/ps2-gpio.c @@ -76,6 +76,7 @@ static void ps2_gpio_close(struct serio *serio) { struct ps2_gpio_data *drvdata = serio->port_data;
+ flush_delayed_work(&drvdata->tx_work); disable_irq(drvdata->irq); }
From: Dmitry Torokhov dmitry.torokhov@gmail.com
[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ]
We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet).
Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/keyboard/matrix_keypad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 403452ef00e6..3d1cb7bf5e35 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -222,7 +222,7 @@ static void matrix_keypad_stop(struct input_dev *dev) keypad->stopped = true; spin_unlock_irq(&keypad->lock);
- flush_work(&keypad->work.work); + flush_delayed_work(&keypad->work); /* * matrix_keypad_scan() will leave IRQs enabled; * we should disable them now.
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 4926b51bfaa6d36bd6f398fb7698679d3962e19d ]
If a driver does any significant activity in its ibss_join method, then it will very well expect that to be called during restart, before any stations are added. Do that.
Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/util.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 716cd6442d86..3deaa01ebee4 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -5,7 +5,7 @@ * Copyright 2007 Johannes Berg johannes@sipsolutions.net * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018 Intel Corporation + * Copyright (C) 2018-2019 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -2020,6 +2020,10 @@ int ieee80211_reconfig(struct ieee80211_local *local) case NL80211_IFTYPE_AP_VLAN: case NL80211_IFTYPE_MONITOR: break; + case NL80211_IFTYPE_ADHOC: + if (sdata->vif.bss_conf.ibss_joined) + WARN_ON(drv_join_ibss(local, sdata)); + /* fall through */ default: ieee80211_reconfig_stations(sdata); /* fall through */
From: Ilan Peer ilan.peer@intel.com
[ Upstream commit 6157ca0d6bfe437691b1e98a62e2efe12b6714da ]
When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue.
However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped.
Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation.
Signed-off-by: Ilan Peer ilan.peer@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/agg-tx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 69e831bc317b..54821fb1a960 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -8,7 +8,7 @@ * Copyright 2007, Michael Wu flamingice@sourmilk.net * Copyright 2007-2010, Intel Corporation * Copyright(c) 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018 Intel Corporation + * Copyright (C) 2018 - 2019 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -366,6 +366,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
+ ieee80211_agg_stop_txq(sta, tid); + spin_unlock_bh(&sta->lock);
ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
From: Francesco Ruggeri fruggeri@arista.com
[ Upstream commit 8d29d16d21342a0c86405d46de0c4ac5daf1760f ]
If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running
% ebtables -t broute -F BROUTING
from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt.
[ 474.680846] BUG: unable to handle kernel paging request at 0000000009600920 [ 474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0 [ 474.693838] Oops: 0000 [#1] SMP [ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1 [ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013 [ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables] [ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d [ 474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207 [ 474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249 [ 474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124 [ 474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f [ 474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001 [ 474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8 [ 474.780234] FS: 0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700 [ 474.788612] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0 [ 474.802052] Call Trace: [ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables] [ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables] [ 474.815605] ? try_module_get+0x37/0x42 [ 474.819716] compat_nf_setsockopt+0x4f/0x6d [ 474.824172] compat_ip_setsockopt+0x7e/0x8c [ 474.828641] compat_raw_setsockopt+0x16/0x3a [ 474.833220] compat_sock_common_setsockopt+0x1d/0x24 [ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1 [ 474.843343] ? __check_object_size+0x76/0x19a [ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b [ 474.853276] do_fast_syscall_32+0xaf/0xf6 [ 474.857548] entry_SYSENTER_compat+0x6b/0x7a
Signed-off-by: Francesco Ruggeri fruggeri@arista.com Acked-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/x_tables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index aecadd471e1d..13e1ac333fa4 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -1899,7 +1899,7 @@ static int __init xt_init(void) seqcount_init(&per_cpu(xt_recseq, i)); }
- xt = kmalloc_array(NFPROTO_NUMPROTO, sizeof(struct xt_af), GFP_KERNEL); + xt = kcalloc(NFPROTO_NUMPROTO, sizeof(struct xt_af), GFP_KERNEL); if (!xt) return -ENOMEM;
From: Jianchao Wang jianchao.w.wang@oracle.com
[ Upstream commit aef1897cd36dcf5e296f1d2bae7e0d268561b685 ]
When requeue, if RQF_DONTPREP, rq has contained some driver specific data, so insert it to hctx dispatch list to avoid any merge. Take scsi as example, here is the trace event log (no io scheduler, because RQF_STARTED would prevent merging),
kworker/0:1H-339 [000] ...1 2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H] scsi_inert_test-1987 [000] .... 2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test] scsi_inert_test-1987 [000] ...2 2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test] kworker/0:1H-339 [000] .... 2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H] scsi_inert_test-1996 [000] ..s1 2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0] scsi_inert_test-1996 [000] .Ns1 2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0] kworker/0:1H-339 [000] ...1 2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] kworker/0:1H-339 [000] ...1 2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] scsi_inert_test-1986 [000] ..s1 2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0]
(32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP. Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP, the sdb only contained the part of (32768 + 8), then only that part was completed. The lucky thing was that scsi_io_completion detected it and requeued the remaining part. So we didn't get corrupted data. However, the requeue of (32776 + 8) is not expected.
Suggested-by: Jens Axboe axboe@kernel.dk Signed-off-by: Jianchao Wang jianchao.w.wang@oracle.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-mq.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c index 23a53b67cf0d..7d53f2314d7c 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -701,12 +701,20 @@ static void blk_mq_requeue_work(struct work_struct *work) spin_unlock_irq(&q->requeue_lock);
list_for_each_entry_safe(rq, next, &rq_list, queuelist) { - if (!(rq->rq_flags & RQF_SOFTBARRIER)) + if (!(rq->rq_flags & (RQF_SOFTBARRIER | RQF_DONTPREP))) continue;
rq->rq_flags &= ~RQF_SOFTBARRIER; list_del_init(&rq->queuelist); - blk_mq_sched_insert_request(rq, true, false, false); + /* + * If RQF_DONTPREP, rq has contained some driver specific + * data, so insert it to hctx dispatch list to avoid any + * merge. + */ + if (rq->rq_flags & RQF_DONTPREP) + blk_mq_request_bypass_insert(rq, false); + else + blk_mq_sched_insert_request(rq, true, false, false); }
while (!list_empty(&rq_list)) {
From: Andrea Claudi aclaudi@redhat.com
[ Upstream commit 098e13f5b21d3398065fce8780f07a3ef62f4812 ]
ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation, but lacks proper Kconfig dependencies and does not explicitly request defrag features.
As a result, if netfilter hooks are not loaded, when IPv6 fragmented packet are handled by ipvs only the first fragment makes through.
Fix it properly declaring the dependency on Kconfig and registering netfilter hooks on ip_vs_add_service() and ip_vs_new_dest().
Reported-by: Li Shuang shuali@redhat.com Signed-off-by: Andrea Claudi aclaudi@redhat.com Acked-by: Julian Anastasov ja@ssi.bg Acked-by: Simon Horman horms@verge.net.au Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/ipvs/Kconfig | 1 + net/netfilter/ipvs/ip_vs_core.c | 10 ++++------ net/netfilter/ipvs/ip_vs_ctl.c | 10 ++++++++++ 3 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig index cad48d07c818..8401cefd9f65 100644 --- a/net/netfilter/ipvs/Kconfig +++ b/net/netfilter/ipvs/Kconfig @@ -29,6 +29,7 @@ config IP_VS_IPV6 bool "IPv6 support for IPVS" depends on IPV6 = y || IP_VS = IPV6 select IP6_NF_IPTABLES + select NF_DEFRAG_IPV6 ---help--- Add IPv6 support to IPVS.
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 7ca926a03b81..3f963ea22277 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1536,14 +1536,12 @@ ip_vs_try_to_schedule(struct netns_ipvs *ipvs, int af, struct sk_buff *skb, /* sorry, all this trouble for a no-hit :) */ IP_VS_DBG_PKT(12, af, pp, skb, iph->off, "ip_vs_in: packet continues traversal as normal"); - if (iph->fragoffs) { - /* Fragment that couldn't be mapped to a conn entry - * is missing module nf_defrag_ipv6 - */ - IP_VS_DBG_RL("Unhandled frag, load nf_defrag_ipv6\n"); + + /* Fragment couldn't be mapped to a conn entry */ + if (iph->fragoffs) IP_VS_DBG_PKT(7, af, pp, skb, iph->off, "unhandled fragment"); - } + *verdict = NF_ACCEPT; return 0; } diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 518364f4abcc..3bcc4b222a82 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -43,6 +43,7 @@ #ifdef CONFIG_IP_VS_IPV6 #include <net/ipv6.h> #include <net/ip6_route.h> +#include <net/netfilter/ipv6/nf_defrag_ipv6.h> #endif #include <net/route.h> #include <net/sock.h> @@ -895,6 +896,7 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest, { struct ip_vs_dest *dest; unsigned int atype, i; + int ret = 0;
EnterFunction(2);
@@ -905,6 +907,10 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest, atype & IPV6_ADDR_LINKLOCAL) && !__ip_vs_addr_is_local_v6(svc->ipvs->net, &udest->addr.in6)) return -EINVAL; + + ret = nf_defrag_ipv6_enable(svc->ipvs->net); + if (ret) + return ret; } else #endif { @@ -1228,6 +1234,10 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u, ret = -EINVAL; goto out_err; } + + ret = nf_defrag_ipv6_enable(ipvs->net); + if (ret) + goto out_err; } #endif
From: Yufen Yu yuyufen@huawei.com
[ Upstream commit 96d7cb932e826219ec41ac02e5af037ffae6098c ]
floppy_check_events() is supposed to return bit flags to say which events occured. We should return zero to say that no event flags are set. Only BIT(0) and BIT(1) are used in the caller. And .check_events interface also expect to return an unsigned int value.
However, after commit a0c80efe5956, it may return -EINTR (-4u). Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't affect runtime, but it obviously is still worth fixing.
Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Fixes: a0c80efe5956 ("floppy: fix lock_fdc() signal handling") Signed-off-by: Yufen Yu yuyufen@huawei.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/floppy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index fdabd0b74492..a8de56f1936d 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4084,7 +4084,7 @@ static unsigned int floppy_check_events(struct gendisk *disk,
if (time_after(jiffies, UDRS->last_checked + UDP->checkfreq)) { if (lock_fdc(drive)) - return -EINTR; + return 0; poll_drive(false, 0); process_fd_request(); }
From: Nicolas Morey-Chaisemartin nmoreychaisemartin@suse.com
[ Upstream commit a4cb5bdb754afe21f3e9e7164213e8600cf69427 ]
Make sure the device has at least 2 completion vectors before allocating to compvec#1
Fixes: a4699f5647f3 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode) Signed-off-by: Nicolas Morey-Chaisemartin nmoreychaisemartin@suse.com Reviewed-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/xprtrdma/verbs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 3d6bf790cf1f..5ddbf227e7c6 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -546,7 +546,8 @@ rpcrdma_ep_create(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia,
sendcq = ib_alloc_cq(ia->ri_device, NULL, ep->rep_attr.cap.max_send_wr + 1, - 1, IB_POLL_WORKQUEUE); + ia->ri_device->num_comp_vectors > 1 ? 1 : 0, + IB_POLL_WORKQUEUE); if (IS_ERR(sendcq)) { rc = PTR_ERR(sendcq); dprintk("RPC: %s: failed to create send CQ: %i\n",
From: Benjamin Coddington bcodding@redhat.com
[ Upstream commit d2ceb7e57086750ea6198a31fd942d98099a0786 ]
If nfs_page_async_flush() removes the page from the mapping, then we can't use page_file_mapping() on it as nfs_updatepate() is wont to do when receiving an error. Instead, push the mapping to the stack before the page is possibly truncated.
Fixes: 8fc75bed96bb ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()") Signed-off-by: Benjamin Coddington bcodding@redhat.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/write.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c index d790faff8e47..51d0b7913c04 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -238,9 +238,9 @@ static void nfs_grow_file(struct page *page, unsigned int offset, unsigned int c }
/* A writeback failed: mark the page as bad, and invalidate the page cache */ -static void nfs_set_pageerror(struct page *page) +static void nfs_set_pageerror(struct address_space *mapping) { - nfs_zap_mapping(page_file_mapping(page)->host, page_file_mapping(page)); + nfs_zap_mapping(mapping->host, mapping); }
/* @@ -994,7 +994,7 @@ static void nfs_write_completion(struct nfs_pgio_header *hdr) nfs_list_remove_request(req); if (test_bit(NFS_IOHDR_ERROR, &hdr->flags) && (hdr->good_bytes < bytes)) { - nfs_set_pageerror(req->wb_page); + nfs_set_pageerror(page_file_mapping(req->wb_page)); nfs_context_set_write_error(req->wb_context, hdr->error); goto remove_req; } @@ -1330,7 +1330,8 @@ int nfs_updatepage(struct file *file, struct page *page, unsigned int offset, unsigned int count) { struct nfs_open_context *ctx = nfs_file_open_context(file); - struct inode *inode = page_file_mapping(page)->host; + struct address_space *mapping = page_file_mapping(page); + struct inode *inode = mapping->host; int status = 0;
nfs_inc_stats(inode, NFSIOS_VFSUPDATEPAGE); @@ -1348,7 +1349,7 @@ int nfs_updatepage(struct file *file, struct page *page,
status = nfs_writepage_setup(ctx, page, offset, count); if (status < 0) - nfs_set_pageerror(page); + nfs_set_pageerror(mapping); else __set_page_dirty_nobuffers(page); out:
From: Yu Zhao yuzhao@google.com
[ Upstream commit 414fd080d125408cb15d04ff4907e1dd8145c8c7 ]
For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb.
Link: http://lkml.kernel.org/r/20190111034033.601-1-yuzhao@google.com Signed-off-by: Yu Zhao yuzhao@google.com Reviewed-by: Jan Kara jack@suse.cz Cc: Dan Williams dan.j.williams@intel.com Cc: Huang Ying ying.huang@intel.com Cc: Matthew Wilcox willy@infradead.org Cc: Keith Busch keith.busch@intel.com Cc: "Michael S . Tsirkin" mst@redhat.com Cc: John Hubbard jhubbard@nvidia.com Cc: Wei Yang richard.weiyang@gmail.com Cc: Mike Rapoport rppt@linux.ibm.com Cc: Andrea Arcangeli aarcange@redhat.com Cc: "Kirill A . Shutemov" kirill.shutemov@linux.intel.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/gup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mm/gup.c b/mm/gup.c index 1abc8b4afff6..0a5374e6e82d 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -1649,7 +1649,8 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, if (!pmd_present(pmd)) return 0;
- if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd))) { + if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) || + pmd_devmap(pmd))) { /* * NUMA hinting faults need to be handled in the GUP * slowpath for accounting purposes and so that they
From: Qian Cai cai@lca.pw
[ Upstream commit 2f1ee0913ce58efe7f18fbd518bd54c598559b89 ]
This reverts commit fe53ca54270a ("mm: use early_pfn_to_nid in page_ext_init").
When booting a system with "page_owner=on",
start_kernel page_ext_init invoke_init_callbacks init_section_page_ext init_page_owner init_early_allocated_pages init_zones_in_node init_pages_in_zone lookup_page_ext page_to_nid
The issue here is that page_to_nid() will not work since some page flags have no node information until later in page_alloc_init_late() due to DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds access with an invalid nid.
UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50 index 7 is out of range for type 'zone [5]'
Also, kernel will panic since flags were poisoned earlier with,
CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_NODE_NOT_IN_PAGE_FLAGS=n
start_kernel setup_arch pagetable_init paging_init sparse_init sparse_init_nid memblock_alloc_try_nid_raw
It did not handle it well in init_pages_in_zone() which ends up calling page_to_nid().
page:ffffea0004200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) page_owner info is not active (free page?) kernel BUG at include/linux/mm.h:990! RIP: 0010:init_page_owner+0x486/0x520
This means that assumptions behind commit fe53ca54270a ("mm: use early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert the commit for now. A proper way to move the page_owner initialization to sooner is to hook into memmap initialization.
Link: http://lkml.kernel.org/r/20190115202812.75820-1-cai@lca.pw Signed-off-by: Qian Cai cai@lca.pw Acked-by: Michal Hocko mhocko@kernel.org Cc: Pasha Tatashin Pavel.Tatashin@microsoft.com Cc: Mel Gorman mgorman@techsingularity.net Cc: Yang Shi yang.shi@linaro.org Cc: Joonsoo Kim iamjoonsoo.kim@lge.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- init/main.c | 3 ++- mm/page_ext.c | 4 +--- 2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/init/main.c b/init/main.c index 18f8f0140fa0..e083fac08aed 100644 --- a/init/main.c +++ b/init/main.c @@ -689,7 +689,6 @@ asmlinkage __visible void __init start_kernel(void) initrd_start = 0; } #endif - page_ext_init(); kmemleak_init(); debug_objects_mem_init(); setup_per_cpu_pageset(); @@ -1140,6 +1139,8 @@ static noinline void __init kernel_init_freeable(void) sched_init_smp();
page_alloc_init_late(); + /* Initialize page ext after all struct pages are initialized. */ + page_ext_init();
do_basic_setup();
diff --git a/mm/page_ext.c b/mm/page_ext.c index a9826da84ccb..4961f13b6ec1 100644 --- a/mm/page_ext.c +++ b/mm/page_ext.c @@ -398,10 +398,8 @@ void __init page_ext_init(void) * We know some arch can have a nodes layout such as * -------------pfn--------------> * N0 | N1 | N2 | N0 | N1 | N2|.... - * - * Take into account DEFERRED_STRUCT_PAGE_INIT. */ - if (early_pfn_to_nid(pfn) != nid) + if (pfn_to_nid(pfn) != nid) continue; if (init_section_page_ext(pfn, nid)) goto oom;
From: Bill Kuzeja William.Kuzeja@stratus.com
[ Upstream commit 388a49959ee4e4e99f160241d9599efa62cd4299 ]
In qla2x00_async_tm_cmd, we reference off sp after it has been freed. This caused a panic on a system running a slub debug kernel. Since fcport is passed in anyways, just use that instead.
Signed-off-by: Bill Kuzeja william.kuzeja@stratus.com Acked-by: Giridhar Malavali gmalavali@marvell.com Acked-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 5352c9bbcaf7..2271a2cd29d2 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1719,13 +1719,13 @@ qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun,
/* Issue Marker IOCB */ qla2x00_marker(vha, vha->hw->req_q_map[0], - vha->hw->rsp_q_map[0], sp->fcport->loop_id, lun, + vha->hw->rsp_q_map[0], fcport->loop_id, lun, flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID); }
done_free_sp: sp->free(sp); - sp->fcport->flags &= ~FCF_ASYNC_SENT; + fcport->flags &= ~FCF_ASYNC_SENT; done: return rval; }
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 8d6ea932856c7087ce8c3d0e79494b7d5386f962 ]
The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read.
Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Vivien Didelot vivien.didelot@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/bcm_sf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index fc8b48adf38b..bb26a193361e 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -692,7 +692,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) * port, the other ones have already been disabled during * bcm_sf2_sw_setup */ - for (port = 0; port < DSA_MAX_PORTS; port++) { + for (port = 0; port < ds->num_ports; port++) { if (dsa_is_user_port(ds, port) || dsa_is_cpu_port(ds, port)) bcm_sf2_port_disable(ds, port, NULL); }
From: Rajneesh Bhardwaj rajneesh.bhardwaj@linux.intel.com
[ Upstream commit 8cd8f0ce0d6aafe661cb3d6781c8b82bc696c04d ]
Add the CPUID model number of Icelake (ICL) mobile processors to the Intel family list. Icelake U/Y series uses model number 0x7E.
Signed-off-by: Rajneesh Bhardwaj rajneesh.bhardwaj@linux.intel.com Signed-off-by: Borislav Petkov bp@suse.de Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Dave Hansen dave.hansen@linux.intel.com Cc: "David E. Box" david.e.box@intel.com Cc: dvhart@infradead.org Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Cc: platform-driver-x86@vger.kernel.org Cc: Qiuxu Zhuo qiuxu.zhuo@intel.com Cc: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20190214115712.19642-2-rajneesh.bhardwaj@linux.int... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/intel-family.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h index 7ed08a7c3398..0ad25cc895ae 100644 --- a/arch/x86/include/asm/intel-family.h +++ b/arch/x86/include/asm/intel-family.h @@ -55,6 +55,8 @@
#define INTEL_FAM6_CANNONLAKE_MOBILE 0x66
+#define INTEL_FAM6_ICELAKE_MOBILE 0x7E + /* "Small Core" Processors (Atom) */
#define INTEL_FAM6_ATOM_PINEVIEW 0x1C
From: Jann Horn jannh@google.com
[ Upstream commit 2c2ade81741c66082f8211f0b96cf509cc4c0218 ]
The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum number of references that we might need to create in the fastpath later, the bump-allocation fastpath only has to modify the non-atomic bias value that tracks the number of extra references we hold instead of the atomic refcount. The maximum number of allocations we can serve (under the assumption that no allocation is made with size 0) is nc->size, so that's the bias used.
However, even when all memory in the allocation has been given away, a reference to the page is still held; and in the `offset < 0` slowpath, the page may be reused if everyone else has dropped their references. This means that the necessary number of references is actually `nc->size+1`.
Luckily, from a quick grep, it looks like the only path that can call page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which requires CAP_NET_ADMIN in the init namespace and is only intended to be used for kernel testing and fuzzing.
To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the `offset < 0` path, below the virt_to_page() call, and then repeatedly call writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI, with a vector consisting of 15 elements containing 1 byte each.
Signed-off-by: Jann Horn jannh@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- mm/page_alloc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a9de1dbb9a6c..ef99971c13dd 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4532,11 +4532,11 @@ void *page_frag_alloc(struct page_frag_cache *nc, /* Even if we own the page, we do not use atomic_set(). * This would break get_page_unless_zero() users. */ - page_ref_add(page, size - 1); + page_ref_add(page, size);
/* reset page count bias and offset to start of new frag */ nc->pfmemalloc = page_is_pfmemalloc(page); - nc->pagecnt_bias = size; + nc->pagecnt_bias = size + 1; nc->offset = size; }
@@ -4552,10 +4552,10 @@ void *page_frag_alloc(struct page_frag_cache *nc, size = nc->size; #endif /* OK, page count is 0, we can safely set it */ - set_page_count(page, size); + set_page_count(page, size + 1);
/* reset page count bias and offset to start of new frag */ - nc->pagecnt_bias = size; + nc->pagecnt_bias = size + 1; offset = size - fragsz; }
From: Huang Zijiang huang.zijiang@zte.com.cn
[ Upstream commit c969c6e7ab8cb42b5c787c567615474fdbad9d6a ]
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference.
Signed-off-by: Huang Zijiang huang.zijiang@zte.com.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index 3b9e74be5fbd..b8155f5e71b4 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -3081,6 +3081,7 @@ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset) dsaf_dev = dev_get_drvdata(&pdev->dev); if (!dsaf_dev) { dev_err(&pdev->dev, "dsaf_dev is NULL\n"); + put_device(&pdev->dev); return -ENODEV; }
@@ -3088,6 +3089,7 @@ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset) if (AE_IS_VER1(dsaf_dev->dsaf_ver)) { dev_err(dsaf_dev->dev, "%s v1 chip doesn't support RoCE!\n", dsaf_dev->ae_dev.name); + put_device(&pdev->dev); return -ENODEV; }
From: Shubhrajyoti Datta shubhrajyoti.datta@xilinx.com
[ Upstream commit d358def706880defa4c9e87381c5bf086a97d5f9 ]
In case the hold bit is not needed we are carrying the old values. Fix the same by resetting the bit when not needed.
Fixes the sporadic i2c bus lockups on National Instruments Zynq-based devices.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Reported-by: Kyle Roeschley kyle.roeschley@ni.com Acked-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Shubhrajyoti Datta shubhrajyoti.datta@xilinx.com Tested-by: Kyle Roeschley kyle.roeschley@ni.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-cadence.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index b13605718291..d917cefc5a19 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -382,8 +382,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if (id->recv_count > CDNS_I2C_FIFO_DEPTH) + if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) ctrl_reg |= CDNS_I2C_CR_HOLD; + else + ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -440,8 +442,11 @@ static void cdns_i2c_msend(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if (id->send_count > CDNS_I2C_FIFO_DEPTH) + if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) ctrl_reg |= CDNS_I2C_CR_HOLD; + else + ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; + cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
From: Paul Kocialkowski paul.kocialkowski@bootlin.com
[ Upstream commit f275a4659484716259cc46268d9043424e51cf0f ]
The driver's interrupt handler checks whether a message is currently being handled with the curr_msg pointer. When it is NULL, the interrupt is considered to be unexpected. Similarly, the i2c_start_transfer routine checks for the remaining number of messages to handle in num_msgs.
However, these values are never cleared and always keep the message and number relevant to the latest transfer (which might be done already and the underlying message memory might have been freed).
When an unexpected interrupt hits with the DONE bit set, the isr will then try to access the flags field of the curr_msg structure, leading to a fatal page fault.
The msg_buf and msg_buf_remaining fields are also never cleared at the end of the transfer, which can lead to similar pitfalls.
Fix these issues by introducing a cleanup function and always calling it after a transfer is finished.
Fixes: e2474541032d ("i2c: bcm2835: Fix hang for writing messages larger than 16 bytes") Signed-off-by: Paul Kocialkowski paul.kocialkowski@bootlin.com Acked-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-bcm2835.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 44deae78913e..4d19254f78c8 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -191,6 +191,15 @@ static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev) bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); }
+static void bcm2835_i2c_finish_transfer(struct bcm2835_i2c_dev *i2c_dev) +{ + i2c_dev->curr_msg = NULL; + i2c_dev->num_msgs = 0; + + i2c_dev->msg_buf = NULL; + i2c_dev->msg_buf_remaining = 0; +} + /* * Note about I2C_C_CLEAR on error: * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in @@ -291,6 +300,9 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
time_left = wait_for_completion_timeout(&i2c_dev->completion, adap->timeout); + + bcm2835_i2c_finish_transfer(i2c_dev); + if (!time_left) { bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
From: Miguel Ojeda miguel.ojeda.sandonis@gmail.com
[ Upstream commit 69ef9bc54715fb1cb7786ada15774e469e822209 ]
On module unload/remove, we need to ensure that work does not run after we have freed resources. Concretely, cancel_delayed_work() may return while the callback function is still running.
From kernel/workqueue.c:
The work callback function may still be running on return, unless it returns true and the work doesn't re-arm itself. Explicitly flush or use cancel_delayed_work_sync() to wait on it.
Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com... Reported-by: Sven Van Asbroeck thesven73@gmail.com Reviewed-by: Dmitry Torokhov dmitry.torokhov@gmail.com Reviewed-by: Sven Van Asbroeck TheSven73@gmail.com Acked-by: Robin van der Gracht robin@protonic.nl Signed-off-by: Miguel Ojeda miguel.ojeda.sandonis@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/auxdisplay/ht16k33.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index a43276c76fc6..21393ec3b9a4 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -509,7 +509,7 @@ static int ht16k33_remove(struct i2c_client *client) struct ht16k33_priv *priv = i2c_get_clientdata(client); struct ht16k33_fbdev *fbdev = &priv->fbdev;
- cancel_delayed_work(&fbdev->work); + cancel_delayed_work_sync(&fbdev->work); unregister_framebuffer(fbdev->info); framebuffer_release(fbdev->info); free_page((unsigned long) fbdev->buffer);
From: Gabriel Fernandez gabriel.fernandez@st.com
[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ]
This patch fixes the following static checker warning:
drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev'
Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Gabriel Fernandez gabriel.fernandez@st.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/keyboard/st-keyscan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c index babcfb165e4f..3b85631fde91 100644 --- a/drivers/input/keyboard/st-keyscan.c +++ b/drivers/input/keyboard/st-keyscan.c @@ -153,6 +153,8 @@ static int keyscan_probe(struct platform_device *pdev)
input_dev->id.bustype = BUS_HOST;
+ keypad_data->input_dev = input_dev; + error = keypad_matrix_key_parse_dt(keypad_data); if (error) return error; @@ -168,8 +170,6 @@ static int keyscan_probe(struct platform_device *pdev)
input_set_drvdata(input_dev, keypad_data);
- keypad_data->input_dev = input_dev; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); keypad_data->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(keypad_data->base))
linux-stable-mirror@lists.linaro.org
-
Sasha Levin