The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 8d8bef50365847134b51c1ec46786bc2873e4e47 Mon Sep 17 00:00:00 2001

From: Lukas Wunner lukas@wunner.de Date: Wed, 3 Jul 2019 12:29:31 +0200 Subject: [PATCH] spi: bcm2835: Fix 3-wire mode if DMA is enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit

Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL.

Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled.

Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer.

Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by: Nuno Sá nuno.sa@analog.com Signed-off-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl kernel@martin.sperl.org Acked-by: Stefan Wahren wahrenst@gmx.net Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.156214852... Signed-off-by: Mark Brown broonie@kernel.org

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 6f243a90c844..840b1b8ff3dc 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -834,7 +834,8 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);

/* handle all the 3-wire mode */ - if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf)) + if (spi->mode & SPI_3WIRE && tfr->rx_buf && + tfr->rx_buf != ctlr->dummy_rx) cs |= BCM2835_SPI_CS_REN; else cs &= ~BCM2835_SPI_CS_REN;