From: Heiko Stuebner heiko.stuebner@bq.com
[ Upstream commit 61170ee9386888f1e6f7e9cc58e8d9a8c2a3c1dd ]
Commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") made the parse-dt function return early when using an auto- generated brightness-table, but didn't take into account that some more settings were handled below the brightness handling, like power-on-delays and also setting the pdata enable-gpio to -EINVAL.
This surfaces for example in the case of a backlight without any enable-gpio which then tries to use gpio-0 in error.
Fix this by simply moving the trailing settings above the brightness handling.
Fixes: 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") Signed-off-by: Heiko Stuebner heiko.stuebner@bq.com Acked-by: Daniel Thompson daniel.thompson@linaro.org Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/backlight/pwm_bl.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index f9ef0673a083..aded3213bfb5 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -268,6 +268,16 @@ static int pwm_backlight_parse_dt(struct device *dev,
memset(data, 0, sizeof(*data));
+ /* + * These values are optional and set as 0 by default, the out values + * are modified only if a valid u32 value can be decoded. + */ + of_property_read_u32(node, "post-pwm-on-delay-ms", + &data->post_pwm_on_delay); + of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay); + + data->enable_gpio = -EINVAL; + /* * Determine the number of brightness levels, if this property is not * set a default table of brightness levels will be used. @@ -380,15 +390,6 @@ static int pwm_backlight_parse_dt(struct device *dev, data->max_brightness--; }
- /* - * These values are optional and set as 0 by default, the out values - * are modified only if a valid u32 value can be decoded. - */ - of_property_read_u32(node, "post-pwm-on-delay-ms", - &data->post_pwm_on_delay); - of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay); - - data->enable_gpio = -EINVAL; return 0; }
From: Vignesh R vigneshr@ti.com
[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]
Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that different instances are uniquely identified. This is required in order to support registering of multiple instances of same ti_am335x_tscadc IP.
Signed-off-by: Vignesh R vigneshr@ti.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/ti_am335x_tscadc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index c2d47d78705b..fd111296b959 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -264,8 +264,9 @@ static int ti_tscadc_probe(struct platform_device *pdev) cell->pdata_size = sizeof(tscadc); }
- err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells, - tscadc->used_cells, NULL, 0, NULL); + err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, + tscadc->cells, tscadc->used_cells, NULL, + 0, NULL); if (err < 0) goto err_disable_clk;
From: Stefano Stabellini sstabellini@kernel.org
[ Upstream commit b79470b64fa9266948d1ce8d825ced94c4f63293 ]
When a connection is closing in_error is set to ENOTCONN. There could still be outstanding data on the ring left by the backend. Before closing the connection on the frontend side, drain the ring.
Signed-off-by: Stefano Stabellini stefanos@xilinx.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-front.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c index 77224d8f3e6f..e5d95aab2cb8 100644 --- a/drivers/xen/pvcalls-front.c +++ b/drivers/xen/pvcalls-front.c @@ -560,15 +560,13 @@ static int __read_ring(struct pvcalls_data_intf *intf, error = intf->in_error; /* get pointers before reading from the ring */ virt_rmb(); - if (error < 0) - return error;
size = pvcalls_queued(prod, cons, array_size); masked_prod = pvcalls_mask(prod, array_size); masked_cons = pvcalls_mask(cons, array_size);
if (size == 0) - return 0; + return error ?: size;
if (len > size) len = size;
From: Stefano Stabellini sstabellini@kernel.org
[ Upstream commit 96283f9a084e23d7cda2d3c5d1ffa6df6cf1ecec ]
inflight_req_id is 0 when initialized. If inflight_req_id is 0, there is no accept_map to free. Fix the check in pvcalls_front_release.
Signed-off-by: Stefano Stabellini stefanos@xilinx.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-front.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c index e5d95aab2cb8..4f3d664b3f39 100644 --- a/drivers/xen/pvcalls-front.c +++ b/drivers/xen/pvcalls-front.c @@ -1030,8 +1030,8 @@ int pvcalls_front_release(struct socket *sock) spin_lock(&bedata->socket_lock); list_del(&map->list); spin_unlock(&bedata->socket_lock); - if (READ_ONCE(map->passive.inflight_req_id) != - PVCALLS_INVALID_ID) { + if (READ_ONCE(map->passive.inflight_req_id) != PVCALLS_INVALID_ID && + READ_ONCE(map->passive.inflight_req_id) != 0) { pvcalls_front_free_map(bedata, map->passive.accept_map); }
From: Stefano Stabellini sstabellini@kernel.org
[ Upstream commit beee1fbe8f7d57d6ebaa5188f9f4db89c2077196 ]
Don't use kzalloc: it ends up leaving sk->sk_prot not properly initialized. Use sk_alloc instead and define our own trivial struct proto.
Signed-off-by: Stefano Stabellini stefanos@xilinx.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-front.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c index 4f3d664b3f39..01588582ae66 100644 --- a/drivers/xen/pvcalls-front.c +++ b/drivers/xen/pvcalls-front.c @@ -31,6 +31,12 @@ #define PVCALLS_NR_RSP_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE) #define PVCALLS_FRONT_MAX_SPIN 5000
+static struct proto pvcalls_proto = { + .name = "PVCalls", + .owner = THIS_MODULE, + .obj_size = sizeof(struct sock), +}; + struct pvcalls_bedata { struct xen_pvcalls_front_ring ring; grant_ref_t ref; @@ -837,7 +843,7 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
received: map2->sock = newsock; - newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL); + newsock->sk = sk_alloc(sock_net(sock->sk), PF_INET, GFP_KERNEL, &pvcalls_proto, false); if (!newsock->sk) { bedata->rsp[req_id].req_id = PVCALLS_INVALID_ID; map->passive.inflight_req_id = PVCALLS_INVALID_ID;
From: Stefano Stabellini sstabellini@kernel.org
[ Upstream commit e6587cdbd732eacb4c7ce592ed46f7bbcefb655f ]
When a connection is closing we receive on pvcalls_sk_state_change notification. Instead of setting the connection as closed immediately (-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read will set the connection as closed when necessary.
That way, we avoid races between pvcalls_sk_state_change and pvcalls_back_ioworker.
Signed-off-by: Stefano Stabellini stefanos@xilinx.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-back.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c index 2e5d845b5091..71b628774c6f 100644 --- a/drivers/xen/pvcalls-back.c +++ b/drivers/xen/pvcalls-back.c @@ -160,9 +160,10 @@ static void pvcalls_conn_back_read(void *opaque)
/* write the data, then modify the indexes */ virt_wmb(); - if (ret < 0) + if (ret < 0) { + atomic_set(&map->read, 0); intf->in_error = ret; - else + } else intf->in_prod = prod + ret; /* update the indexes, then notify the other end */ virt_wmb(); @@ -288,7 +289,7 @@ static void pvcalls_sk_state_change(struct sock *sock) return;
intf = map->ring; - intf->in_error = -ENOTCONN; + atomic_inc(&map->read); notify_remote_via_irq(map->irq); }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]
When building the kernel with Clang, the following section mismatch warning appears:
WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master() The function twl_probe() references the function __init unprotect_pm_master(). This is often because twl_probe lacks a __init annotation or the annotation of unprotect_pm_master is wrong.
Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch.
Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/twl-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 4be3d239da9e..299016bc46d9 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -979,7 +979,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, * letting it generate the right frequencies for USB, MADC, and * other purposes. */ -static inline int __init protect_pm_master(void) +static inline int protect_pm_master(void) { int e = 0;
@@ -988,7 +988,7 @@ static inline int __init protect_pm_master(void) return e; }
-static inline int __init unprotect_pm_master(void) +static inline int unprotect_pm_master(void) { int e = 0;
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]
When building the kernel with Clang, the following section mismatch warnings appear:
WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:init_prcm_registers() The function db8500_prcmu_probe() references the function __init init_prcm_registers(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of init_prcm_registers is wrong.
WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:fw_project_name() The function db8500_prcmu_probe() references the function __init fw_project_name(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of fw_project_name is wrong.
db8500_prcmu_probe should not be marked as __init so remove the __init annotation from fw_project_name and init_prcm_registers.
Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/db8500-prcmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5970b8def548..aec20e1c7d3d 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2584,7 +2584,7 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, };
-static __init char *fw_project_name(u32 project) +static char *fw_project_name(u32 project) { switch (project) { case PRCMU_FW_PROJECT_U8500: @@ -2732,7 +2732,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size) INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work); }
-static void __init init_prcm_registers(void) +static void init_prcm_registers(void) { u32 val;
From: Nicolas Boichat drinkcat@chromium.org
[ Upstream commit a177276aa098aa47a100d51a13eaaef029604b6d ]
If the PMIC ID is unknown, the current code would call irq_domain_remove and panic, as pmic->irq_domain is only initialized by mt6397_irq_init.
Return immediately with an error, if the chip ID is unsupported.
Signed-off-by: Nicolas Boichat drinkcat@chromium.org Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/mt6397-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c index 77b64bd64df3..ab24e176ef44 100644 --- a/drivers/mfd/mt6397-core.c +++ b/drivers/mfd/mt6397-core.c @@ -329,8 +329,7 @@ static int mt6397_probe(struct platform_device *pdev)
default: dev_err(&pdev->dev, "unsupported chip: %d\n", id); - ret = -ENODEV; - break; + return -ENODEV; }
if (ret) {
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]
This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success.
I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time.
Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/ab8500-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 30d09d177171..11ab17f64c64 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -261,7 +261,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank, mutex_unlock(&ab8500->lock); dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
- return ret; + return (ret < 0) ? ret : 0; }
static int ab8500_get_register(struct device *dev, u8 bank,
From: Dien Pham dien.pham.ry@renesas.com
[ Upstream commit b0aff01e7aa6ad2d6998ef1323843212d1db8b04 ]
Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table, the physical register value is not updated by regmap and DVFS doesn't work as expected. Fix it!
Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver") Signed-off-by: Dien Pham dien.pham.ry@renesas.com [wsa: rebase, add 'Fixes', reword commit message] Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Marek Vasut marek.vasut@gmail.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/bd9571mwv.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c index 503979c81dae..fab3cdc27ed6 100644 --- a/drivers/mfd/bd9571mwv.c +++ b/drivers/mfd/bd9571mwv.c @@ -59,6 +59,7 @@ static const struct regmap_access_table bd9571mwv_writable_table = { };
static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = { + regmap_reg_range(BD9571MWV_DVFS_MONIVDAC, BD9571MWV_DVFS_MONIVDAC), regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN), regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT), regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
From: Jean Delvare jdelvare@suse.de
[ Upstream commit 628f3dfe4c7b35bbe63ec194ca6da857b00b0083 ]
It doesn't make sense to present option MFD_AT91_USART by default if not building an AT91 kernel, as the drivers which depend on it are not available.
Fixes: 7d3aa342cef7 ("mfd: at91-usart: Add MFD driver for USART") Signed-off-by: Jean Delvare jdelvare@suse.de Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8c5dfdce4326..f461460a2aeb 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -102,6 +102,7 @@ config MFD_AAT2870_CORE config MFD_AT91_USART tristate "AT91 USART Driver" select MFD_CORE + depends on ARCH_AT91 || COMPILE_TEST help Select this to get support for AT91 USART IP. This is a wrapper over at91-usart-serial driver and usart-spi-driver. Only one function
From: Jonathan Marek jonathan@marek.ca
[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]
This is required as part of the initialization sequence on certain SoCs.
If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device).
Signed-off-by: Jonathan Marek jonathan@marek.ca Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/qcom_rpm.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c index 52fafea06067..8d420c37b2a6 100644 --- a/drivers/mfd/qcom_rpm.c +++ b/drivers/mfd/qcom_rpm.c @@ -638,6 +638,10 @@ static int qcom_rpm_probe(struct platform_device *pdev) return -EFAULT; }
+ writel(fw_version[0], RPM_CTRL_REG(rpm, 0)); + writel(fw_version[1], RPM_CTRL_REG(rpm, 1)); + writel(fw_version[2], RPM_CTRL_REG(rpm, 2)); + dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0], fw_version[1], fw_version[2]);
From: Charles Keepax ckeepax@opensource.cirrus.com
[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/wm5110-tables.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 1ee68bd440fb..16c6e2accfaa 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -1618,6 +1618,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */ { 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */ { 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */ + { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */ { 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */ { 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */ { 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */ @@ -2869,6 +2870,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_ASRC_ENABLE: case ARIZONA_ASRC_STATUS: case ARIZONA_ASRC_RATE1: + case ARIZONA_ASRC_RATE2: case ARIZONA_ISRC_1_CTRL_1: case ARIZONA_ISRC_1_CTRL_2: case ARIZONA_ISRC_1_CTRL_3:
From: Oskari Lemmela oskari@lemmela.net
[ Upstream commit 4a19f9a65375ca9781b3ca9e810ece92edfc3e78 ]
As axp20x-ac-power-supply now supports AXP813, add a cell for it.
Signed-off-by: Oskari Lemmela oskari@lemmela.net Reviewed-by: Quentin Schulz quentin.schulz@bootlin.com Reviewed-by: Chen-Yu Tsai wens@csie.org Tested-by: Vasily Khoruzhick anarsoul@gmail.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/axp20x.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 0be511dd93d0..dfc3cff1d08b 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -778,6 +778,11 @@ static const struct mfd_cell axp813_cells[] = { }, { .name = "axp20x-battery-power-supply", .of_compatible = "x-powers,axp813-battery-power-supply", + }, { + .name = "axp20x-ac-power-supply", + .of_compatible = "x-powers,axp813-ac-power-supply", + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), + .resources = axp20x_ac_power_supply_resources, }, };
From: Chen-Yu Tsai wens@csie.org
[ Upstream commit 753a8d083e085c6f552c7982749de4cc7c40e2ac ]
In the axp20x driver, the various mfd_cell lists had varying amounts of indentation, sometimes even within the same list. For the axp288, there's no alignment at all.
Re-align the right hand side of the assignments with the least amount of tabs possible. Also collapse the closing bracket and the opening bracket of the next entry onto the same line for the axp288, to be consistent with all the other mfd_cell lists.
This patch is whitespace change only. No functionality is modified.
Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Oskari Lemmela oskari@lemmela.net Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/axp20x.c | 107 +++++++++++++++++++++---------------------- 1 file changed, 51 insertions(+), 56 deletions(-)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index dfc3cff1d08b..8037b4e01ed6 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -640,9 +640,9 @@ static const struct mfd_cell axp221_cells[] = {
static const struct mfd_cell axp223_cells[] = { { - .name = "axp221-pek", - .num_resources = ARRAY_SIZE(axp22x_pek_resources), - .resources = axp22x_pek_resources, + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp22x_pek_resources), + .resources = axp22x_pek_resources, }, { .name = "axp22x-adc", .of_compatible = "x-powers,axp221-adc", @@ -650,7 +650,7 @@ static const struct mfd_cell axp223_cells[] = { .name = "axp20x-battery-power-supply", .of_compatible = "x-powers,axp221-battery-power-supply", }, { - .name = "axp20x-regulator", + .name = "axp20x-regulator", }, { .name = "axp20x-ac-power-supply", .of_compatible = "x-powers,axp221-ac-power-supply", @@ -666,9 +666,9 @@ static const struct mfd_cell axp223_cells[] = {
static const struct mfd_cell axp152_cells[] = { { - .name = "axp20x-pek", - .num_resources = ARRAY_SIZE(axp152_pek_resources), - .resources = axp152_pek_resources, + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp152_pek_resources), + .resources = axp152_pek_resources, }, };
@@ -697,84 +697,79 @@ static const struct resource axp288_charger_resources[] = {
static const struct mfd_cell axp288_cells[] = { { - .name = "axp288_adc", - .num_resources = ARRAY_SIZE(axp288_adc_resources), - .resources = axp288_adc_resources, - }, - { - .name = "axp288_extcon", - .num_resources = ARRAY_SIZE(axp288_extcon_resources), - .resources = axp288_extcon_resources, - }, - { - .name = "axp288_charger", - .num_resources = ARRAY_SIZE(axp288_charger_resources), - .resources = axp288_charger_resources, - }, - { - .name = "axp288_fuel_gauge", - .num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources), - .resources = axp288_fuel_gauge_resources, - }, - { - .name = "axp221-pek", - .num_resources = ARRAY_SIZE(axp288_power_button_resources), - .resources = axp288_power_button_resources, - }, - { - .name = "axp288_pmic_acpi", + .name = "axp288_adc", + .num_resources = ARRAY_SIZE(axp288_adc_resources), + .resources = axp288_adc_resources, + }, { + .name = "axp288_extcon", + .num_resources = ARRAY_SIZE(axp288_extcon_resources), + .resources = axp288_extcon_resources, + }, { + .name = "axp288_charger", + .num_resources = ARRAY_SIZE(axp288_charger_resources), + .resources = axp288_charger_resources, + }, { + .name = "axp288_fuel_gauge", + .num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources), + .resources = axp288_fuel_gauge_resources, + }, { + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp288_power_button_resources), + .resources = axp288_power_button_resources, + }, { + .name = "axp288_pmic_acpi", }, };
static const struct mfd_cell axp803_cells[] = { { - .name = "axp221-pek", - .num_resources = ARRAY_SIZE(axp803_pek_resources), - .resources = axp803_pek_resources, + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp803_pek_resources), + .resources = axp803_pek_resources, }, - { .name = "axp20x-regulator" }, + { .name = "axp20x-regulator" }, };
static const struct mfd_cell axp806_self_working_cells[] = { { - .name = "axp221-pek", - .num_resources = ARRAY_SIZE(axp806_pek_resources), - .resources = axp806_pek_resources, + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp806_pek_resources), + .resources = axp806_pek_resources, }, - { .name = "axp20x-regulator" }, + { .name = "axp20x-regulator" }, };
static const struct mfd_cell axp806_cells[] = { { - .id = 2, - .name = "axp20x-regulator", + .id = 2, + .name = "axp20x-regulator", }, };
static const struct mfd_cell axp809_cells[] = { { - .name = "axp221-pek", - .num_resources = ARRAY_SIZE(axp809_pek_resources), - .resources = axp809_pek_resources, + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp809_pek_resources), + .resources = axp809_pek_resources, }, { - .id = 1, - .name = "axp20x-regulator", + .id = 1, + .name = "axp20x-regulator", }, };
static const struct mfd_cell axp813_cells[] = { { - .name = "axp221-pek", - .num_resources = ARRAY_SIZE(axp803_pek_resources), - .resources = axp803_pek_resources, + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp803_pek_resources), + .resources = axp803_pek_resources, }, { - .name = "axp20x-regulator", + .name = "axp20x-regulator", }, { - .name = "axp20x-gpio", - .of_compatible = "x-powers,axp813-gpio", + .name = "axp20x-gpio", + .of_compatible = "x-powers,axp813-gpio", }, { - .name = "axp813-adc", - .of_compatible = "x-powers,axp813-adc", + .name = "axp813-adc", + .of_compatible = "x-powers,axp813-adc", }, { .name = "axp20x-battery-power-supply", .of_compatible = "x-powers,axp813-battery-power-supply",
From: Oskari Lemmela oskari@lemmela.net
[ Upstream commit ea90e7b47f0a8bd2fe14e9a88f523de7c67db90a ]
Parts of the AXP803 are compatible with their counterparts on the AXP813. These include the GPIO, ADC, AC and battery power supplies.
Signed-off-by: Oskari Lemmela oskari@lemmela.net Reviewed-by: Chen-Yu Tsai wens@csie.org Tested-by: Vasily Khoruzhick anarsoul@gmail.com Signed-off-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/axp20x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 8037b4e01ed6..f8e0fa97bb31 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -726,6 +726,20 @@ static const struct mfd_cell axp803_cells[] = { .name = "axp221-pek", .num_resources = ARRAY_SIZE(axp803_pek_resources), .resources = axp803_pek_resources, + }, { + .name = "axp20x-gpio", + .of_compatible = "x-powers,axp813-gpio", + }, { + .name = "axp813-adc", + .of_compatible = "x-powers,axp813-adc", + }, { + .name = "axp20x-battery-power-supply", + .of_compatible = "x-powers,axp813-battery-power-supply", + }, { + .name = "axp20x-ac-power-supply", + .of_compatible = "x-powers,axp813-ac-power-supply", + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), + .resources = axp20x_ac_power_supply_resources, }, { .name = "axp20x-regulator" }, };
From: Enric Balletbo i Serra enric.balletbo@collabora.com
[ Upstream commit 18e294ddafaeb80a1e2e10c9bd750a6cb8388d5b ]
The driver adds different MFD child devices via mfd_add_devices() and hence it is required to call mfd_remove_devices() to remove MFD child devices.
Fixes: 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd") Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/cros_ec_dev.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index b99a194ce5a4..2d0fee488c5a 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -499,6 +499,7 @@ static int ec_device_remove(struct platform_device *pdev)
cros_ec_debugfs_remove(ec);
+ mfd_remove_devices(ec->dev); cdev_del(&ec->cdev); device_unregister(&ec->class_dev); return 0;
From: Keerthy j-keerthy@ti.com
[ Upstream commit 75d4c5e03c2ae9902ab521024b10291f6fc9515b ]
Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function.
Reported-by: Christian Hohnstaedt Christian.Hohnstaedt@wago.com Signed-off-by: Keerthy j-keerthy@ti.com Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/tps65218.c | 24 +++--------------------- 1 file changed, 3 insertions(+), 21 deletions(-)
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index 910f569ff77c..8bcdecf494d0 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -235,9 +235,9 @@ static int tps65218_probe(struct i2c_client *client,
mutex_init(&tps->tps_lock);
- ret = regmap_add_irq_chip(tps->regmap, tps->irq, - IRQF_ONESHOT, 0, &tps65218_irq_chip, - &tps->irq_data); + ret = devm_regmap_add_irq_chip(&client->dev, tps->regmap, tps->irq, + IRQF_ONESHOT, 0, &tps65218_irq_chip, + &tps->irq_data); if (ret < 0) return ret;
@@ -253,26 +253,9 @@ static int tps65218_probe(struct i2c_client *client, ARRAY_SIZE(tps65218_cells), NULL, 0, regmap_irq_get_domain(tps->irq_data));
- if (ret < 0) - goto err_irq; - - return 0; - -err_irq: - regmap_del_irq_chip(tps->irq, tps->irq_data); - return ret; }
-static int tps65218_remove(struct i2c_client *client) -{ - struct tps65218 *tps = i2c_get_clientdata(client); - - regmap_del_irq_chip(tps->irq, tps->irq_data); - - return 0; -} - static const struct i2c_device_id tps65218_id_table[] = { { "tps65218", TPS65218 }, { }, @@ -285,7 +268,6 @@ static struct i2c_driver tps65218_driver = { .of_match_table = of_tps65218_match_table, }, .probe = tps65218_probe, - .remove = tps65218_remove, .id_table = tps65218_id_table, };
From: Kangjie Lu kjlu@umn.edu
[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]
When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails.
Signed-off-by: Kangjie Lu kjlu@umn.edu Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/mc13xxx-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index f475e848252f..d0bf50e3568d 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
- mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0); + ret = mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0); + if (ret) + goto out;
adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2 | MC13XXX_ADC0_CHRGRAWDIV;
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit 1f8ce09b36c41a026a37a24b20efa32000892a64 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change': drivers/xen/pvcalls-back.c:286:28: warning: variable 'intf' set but not used [-Wunused-but-set-variable]
It not used since e6587cdbd732 ("pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read")
Signed-off-by: YueHaibing yuehaibing@huawei.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-back.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c index 71b628774c6f..7aa64d1b119c 100644 --- a/drivers/xen/pvcalls-back.c +++ b/drivers/xen/pvcalls-back.c @@ -283,12 +283,10 @@ static int pvcalls_back_socket(struct xenbus_device *dev, static void pvcalls_sk_state_change(struct sock *sock) { struct sock_mapping *map = sock->sk_user_data; - struct pvcalls_data_intf *intf;
if (map == NULL) return;
- intf = map->ring; atomic_inc(&map->read); notify_remote_via_irq(map->irq); }
From: Wen Yang wen.yang99@zte.com.cn
[ Upstream commit 8d68100ab4ad92560a16a68b72e068613ac4d573 ]
Currently there are some issues with the ucc_of_parse_tdm function: 1, a possible null pointer dereference in ucc_of_parse_tdm, detected by the semantic patch deref_null.cocci, with the following warning: drivers/soc/fsl/qe/qe_tdm.c:177:21-24: ERROR: pdev is NULL but dereferenced. 2, dev gets modified, so in any case that devm_iounmap() will fail even when the new pdev is valid, because the iomap was done with a different pdev. 3, there is no driver bind with the "fsl,t1040-qe-si" or "fsl,t1040-qe-siram" device. So allocating resources using devm_*() with these devices won't provide a cleanup path for these resources when the caller fails.
This patch fixes them.
Suggested-by: Li Yang leoyang.li@nxp.com Suggested-by: Christophe LEROY christophe.leroy@c-s.fr Signed-off-by: Wen Yang wen.yang99@zte.com.cn Reviewed-by: Peng Hao peng.hao2@zte.com.cn CC: Julia Lawall julia.lawall@lip6.fr CC: Zhao Qiang qiang.zhao@nxp.com CC: David S. Miller davem@davemloft.net CC: netdev@vger.kernel.org CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/fsl_ucc_hdlc.c | 62 +++++++++++++++++++++++++++++++++- drivers/soc/fsl/qe/qe_tdm.c | 55 ------------------------------ 2 files changed, 61 insertions(+), 56 deletions(-)
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c index 4d6409605207..af13d8cf94ad 100644 --- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -1049,6 +1049,54 @@ static const struct net_device_ops uhdlc_ops = { .ndo_tx_timeout = uhdlc_tx_timeout, };
+static int hdlc_map_iomem(char *name, int init_flag, void __iomem **ptr) +{ + struct device_node *np; + struct platform_device *pdev; + struct resource *res; + static int siram_init_flag; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, name); + if (!np) + return -EINVAL; + + pdev = of_find_device_by_node(np); + if (!pdev) { + pr_err("%pOFn: failed to lookup pdev\n", np); + of_node_put(np); + return -EINVAL; + } + + of_node_put(np); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -EINVAL; + goto error_put_device; + } + *ptr = ioremap(res->start, resource_size(res)); + if (!*ptr) { + ret = -ENOMEM; + goto error_put_device; + } + + /* We've remapped the addresses, and we don't need the device any + * more, so we should release it. + */ + put_device(&pdev->dev); + + if (init_flag && siram_init_flag == 0) { + memset_io(*ptr, 0, resource_size(res)); + siram_init_flag = 1; + } + return 0; + +error_put_device: + put_device(&pdev->dev); + + return ret; +} + static int ucc_hdlc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -1143,6 +1191,15 @@ static int ucc_hdlc_probe(struct platform_device *pdev) ret = ucc_of_parse_tdm(np, utdm, ut_info); if (ret) goto free_utdm; + + ret = hdlc_map_iomem("fsl,t1040-qe-si", 0, + (void __iomem **)&utdm->si_regs); + if (ret) + goto free_utdm; + ret = hdlc_map_iomem("fsl,t1040-qe-siram", 1, + (void __iomem **)&utdm->siram); + if (ret) + goto unmap_si_regs; }
if (of_property_read_u16(np, "fsl,hmask", &uhdlc_priv->hmask)) @@ -1151,7 +1208,7 @@ static int ucc_hdlc_probe(struct platform_device *pdev) ret = uhdlc_init(uhdlc_priv); if (ret) { dev_err(&pdev->dev, "Failed to init uhdlc\n"); - goto free_utdm; + goto undo_uhdlc_init; }
dev = alloc_hdlcdev(uhdlc_priv); @@ -1181,6 +1238,9 @@ static int ucc_hdlc_probe(struct platform_device *pdev) free_dev: free_netdev(dev); undo_uhdlc_init: + iounmap(utdm->siram); +unmap_si_regs: + iounmap(utdm->si_regs); free_utdm: if (uhdlc_priv->tsa) kfree(utdm); diff --git a/drivers/soc/fsl/qe/qe_tdm.c b/drivers/soc/fsl/qe/qe_tdm.c index f78c34647ca2..76480df195a8 100644 --- a/drivers/soc/fsl/qe/qe_tdm.c +++ b/drivers/soc/fsl/qe/qe_tdm.c @@ -44,10 +44,6 @@ int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm, const char *sprop; int ret = 0; u32 val; - struct resource *res; - struct device_node *np2; - static int siram_init_flag; - struct platform_device *pdev;
sprop = of_get_property(np, "fsl,rx-sync-clock", NULL); if (sprop) { @@ -124,57 +120,6 @@ int ucc_of_parse_tdm(struct device_node *np, struct ucc_tdm *utdm, utdm->siram_entry_id = val;
set_si_param(utdm, ut_info); - - np2 = of_find_compatible_node(NULL, NULL, "fsl,t1040-qe-si"); - if (!np2) - return -EINVAL; - - pdev = of_find_device_by_node(np2); - if (!pdev) { - pr_err("%pOFn: failed to lookup pdev\n", np2); - of_node_put(np2); - return -EINVAL; - } - - of_node_put(np2); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - utdm->si_regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(utdm->si_regs)) { - ret = PTR_ERR(utdm->si_regs); - goto err_miss_siram_property; - } - - np2 = of_find_compatible_node(NULL, NULL, "fsl,t1040-qe-siram"); - if (!np2) { - ret = -EINVAL; - goto err_miss_siram_property; - } - - pdev = of_find_device_by_node(np2); - if (!pdev) { - ret = -EINVAL; - pr_err("%pOFn: failed to lookup pdev\n", np2); - of_node_put(np2); - goto err_miss_siram_property; - } - - of_node_put(np2); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - utdm->siram = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(utdm->siram)) { - ret = PTR_ERR(utdm->siram); - goto err_miss_siram_property; - } - - if (siram_init_flag == 0) { - memset_io(utdm->siram, 0, resource_size(res)); - siram_init_flag = 1; - } - - return ret; - -err_miss_siram_property: - devm_iounmap(&pdev->dev, utdm->si_regs); return ret; } EXPORT_SYMBOL(ucc_of_parse_tdm);
From: Denis Bolotin dbolotin@marvell.com
[ Upstream commit 2d533a9287f2011632977e87ce2783f4c689c984 ]
In PBL chains with non power of 2 page count, the producer is not at the beginning of the chain when index is 0 after a wrap. Therefore, after the producer index wrap around, page index should be calculated more carefully.
Signed-off-by: Denis Bolotin dbolotin@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/qed/qed_chain.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h index 59ddf9af909e..2dd0a9ed5b36 100644 --- a/include/linux/qed/qed_chain.h +++ b/include/linux/qed/qed_chain.h @@ -663,6 +663,37 @@ out: static inline void qed_chain_set_prod(struct qed_chain *p_chain, u32 prod_idx, void *p_prod_elem) { + if (p_chain->mode == QED_CHAIN_MODE_PBL) { + u32 cur_prod, page_mask, page_cnt, page_diff; + + cur_prod = is_chain_u16(p_chain) ? p_chain->u.chain16.prod_idx : + p_chain->u.chain32.prod_idx; + + /* Assume that number of elements in a page is power of 2 */ + page_mask = ~p_chain->elem_per_page_mask; + + /* Use "cur_prod - 1" and "prod_idx - 1" since producer index + * reaches the first element of next page before the page index + * is incremented. See qed_chain_produce(). + * Index wrap around is not a problem because the difference + * between current and given producer indices is always + * positive and lower than the chain's capacity. + */ + page_diff = (((cur_prod - 1) & page_mask) - + ((prod_idx - 1) & page_mask)) / + p_chain->elem_per_page; + + page_cnt = qed_chain_get_page_cnt(p_chain); + if (is_chain_u16(p_chain)) + p_chain->pbl.c.u16.prod_page_idx = + (p_chain->pbl.c.u16.prod_page_idx - + page_diff + page_cnt) % page_cnt; + else + p_chain->pbl.c.u32.prod_page_idx = + (p_chain->pbl.c.u32.prod_page_idx - + page_diff + page_cnt) % page_cnt; + } + if (is_chain_u16(p_chain)) p_chain->u.chain16.prod_idx = (u16) prod_idx; else
From: Denis Bolotin dbolotin@marvell.com
[ Upstream commit 46721c3d9e273aea880e9ff835b0e1271e1cd2fb ]
Make sure chain element is updated before ringing the doorbell.
Signed-off-by: Denis Bolotin dbolotin@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index c6f4bab67a5f..9e728ec82c21 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -1603,6 +1603,10 @@ static void qed_ll2_post_rx_buffer_notify_fw(struct qed_hwfn *p_hwfn, cq_prod = qed_chain_get_prod_idx(&p_rx->rcq_chain); rx_prod.bd_prod = cpu_to_le16(bd_prod); rx_prod.cqe_prod = cpu_to_le16(cq_prod); + + /* Make sure chain element is updated before ringing the doorbell */ + dma_wmb(); + DIRECT_REG_WR(p_rx->set_prod_addr, *((u32 *)&rx_prod)); }
From: Yonglong Liu liuyonglong@huawei.com
[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug:
[134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290
struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic.
This patch frees vf_cb after hnae_handle used.
Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: Huazhong Tan tanhuazhong@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c index ad1779fc410e..a78bfafd212c 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c @@ -147,12 +147,10 @@ static void hns_ae_put_handle(struct hnae_handle *handle) struct hnae_vf_cb *vf_cb = hns_ae_get_vf_cb(handle); int i;
- vf_cb->mac_cb = NULL; - - kfree(vf_cb); - for (i = 0; i < handle->q_num; i++) hns_ae_get_ring_pair(handle->qs[i])->used_by_vf = 0; + + kfree(vf_cb); }
static int hns_ae_wait_flow_down(struct hnae_handle *handle)
From: Peter Oskolkov posk@google.com
[ Upstream commit 3271a4821882a64214acc1bd7b173900ec70c9bf ]
Commit ade446403bfb ("net: ipv4: do not handle duplicate fragments as overlapping") changed IPv4 defragmentation so that duplicate fragments, as well as _some_ fragments completely covered by previously delivered fragments, do not lead to the whole frag queue being discarded. This makes the existing ip_defrag selftest flaky.
This patch * makes sure that negative IPv4 defrag tests generate truly overlapping fragments that trigger defrag queue drops; * tests that duplicate IPv4 fragments do not trigger defrag queue drops; * makes a couple of minor tweaks to the test aimed at increasing its code coverage and reduce flakiness.
Signed-off-by: Peter Oskolkov posk@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/ip_defrag.c | 96 +++++++++++++++++++++--- tools/testing/selftests/net/ip_defrag.sh | 9 ++- 2 files changed, 95 insertions(+), 10 deletions(-)
diff --git a/tools/testing/selftests/net/ip_defrag.c b/tools/testing/selftests/net/ip_defrag.c index 61ae2782388e..5d56cc0838f6 100644 --- a/tools/testing/selftests/net/ip_defrag.c +++ b/tools/testing/selftests/net/ip_defrag.c @@ -203,6 +203,7 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, { struct ip *iphdr = (struct ip *)ip_frame; struct ip6_hdr *ip6hdr = (struct ip6_hdr *)ip_frame; + const bool ipv4 = !ipv6; int res; int offset; int frag_len; @@ -239,19 +240,53 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, iphdr->ip_sum = 0; }
+ /* Occasionally test in-order fragments. */ + if (!cfg_overlap && (rand() % 100 < 15)) { + offset = 0; + while (offset < (UDP_HLEN + payload_len)) { + send_fragment(fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } + return; + } + + /* Occasionally test IPv4 "runs" (see net/ipv4/ip_fragment.c) */ + if (ipv4 && !cfg_overlap && (rand() % 100 < 20) && + (payload_len > 9 * max_frag_len)) { + offset = 6 * max_frag_len; + while (offset < (UDP_HLEN + payload_len)) { + send_fragment(fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } + offset = 3 * max_frag_len; + while (offset < 6 * max_frag_len) { + send_fragment(fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } + offset = 0; + while (offset < 3 * max_frag_len) { + send_fragment(fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } + return; + } + /* Odd fragments. */ offset = max_frag_len; while (offset < (UDP_HLEN + payload_len)) { send_fragment(fd_raw, addr, alen, offset, ipv6); + /* IPv4 ignores duplicates, so randomly send a duplicate. */ + if (ipv4 && (1 == rand() % 100)) + send_fragment(fd_raw, addr, alen, offset, ipv6); offset += 2 * max_frag_len; }
if (cfg_overlap) { /* Send an extra random fragment. */ - offset = rand() % (UDP_HLEN + payload_len - 1); - /* sendto() returns EINVAL if offset + frag_len is too small. */ if (ipv6) { struct ip6_frag *fraghdr = (struct ip6_frag *)(ip_frame + IP6_HLEN); + /* sendto() returns EINVAL if offset + frag_len is too small. */ + offset = rand() % (UDP_HLEN + payload_len - 1); frag_len = max_frag_len + rand() % 256; /* In IPv6 if !!(frag_len % 8), the fragment is dropped. */ frag_len &= ~0x7; @@ -259,13 +294,29 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, ip6hdr->ip6_plen = htons(frag_len); frag_len += IP6_HLEN; } else { - frag_len = IP4_HLEN + UDP_HLEN + rand() % 256; + /* In IPv4, duplicates and some fragments completely inside + * previously sent fragments are dropped/ignored. So + * random offset and frag_len can result in a dropped + * fragment instead of a dropped queue/packet. So we + * hard-code offset and frag_len. + * + * See ade446403bfb ("net: ipv4: do not handle duplicate + * fragments as overlapping"). + */ + if (max_frag_len * 4 < payload_len || max_frag_len < 16) { + /* not enough payload to play with random offset and frag_len. */ + offset = 8; + frag_len = IP4_HLEN + UDP_HLEN + max_frag_len; + } else { + offset = rand() % (payload_len / 2); + frag_len = 2 * max_frag_len + 1 + rand() % 256; + } iphdr->ip_off = htons(offset / 8 | IP4_MF); iphdr->ip_len = htons(frag_len); } res = sendto(fd_raw, ip_frame, frag_len, 0, addr, alen); if (res < 0) - error(1, errno, "sendto overlap"); + error(1, errno, "sendto overlap: %d", frag_len); if (res != frag_len) error(1, 0, "sendto overlap: %d vs %d", (int)res, frag_len); frag_counter++; @@ -275,6 +326,9 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, offset = 0; while (offset < (UDP_HLEN + payload_len)) { send_fragment(fd_raw, addr, alen, offset, ipv6); + /* IPv4 ignores duplicates, so randomly send a duplicate. */ + if (ipv4 && (1 == rand() % 100)) + send_fragment(fd_raw, addr, alen, offset, ipv6); offset += 2 * max_frag_len; } } @@ -282,7 +336,11 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, static void run_test(struct sockaddr *addr, socklen_t alen, bool ipv6) { int fd_tx_raw, fd_rx_udp; - struct timeval tv = { .tv_sec = 0, .tv_usec = 10 * 1000 }; + /* Frag queue timeout is set to one second in the calling script; + * socket timeout should be just a bit longer to avoid tests interfering + * with each other. + */ + struct timeval tv = { .tv_sec = 1, .tv_usec = 10 }; int idx; int min_frag_len = ipv6 ? 1280 : 8;
@@ -308,12 +366,32 @@ static void run_test(struct sockaddr *addr, socklen_t alen, bool ipv6) payload_len += (rand() % 4096)) { if (cfg_verbose) printf("payload_len: %d\n", payload_len); - max_frag_len = min_frag_len; - do { + + if (cfg_overlap) { + /* With overlaps, one send/receive pair below takes + * at least one second (== timeout) to run, so there + * is not enough test time to run a nested loop: + * the full overlap test takes 20-30 seconds. + */ + max_frag_len = min_frag_len + + rand() % (1500 - FRAG_HLEN - min_frag_len); send_udp_frags(fd_tx_raw, addr, alen, ipv6); recv_validate_udp(fd_rx_udp); - max_frag_len += 8 * (rand() % 8); - } while (max_frag_len < (1500 - FRAG_HLEN) && max_frag_len <= payload_len); + } else { + /* Without overlaps, each packet reassembly (== one + * send/receive pair below) takes very little time to + * run, so we can easily afford more thourough testing + * with a nested loop: the full non-overlap test takes + * less than one second). + */ + max_frag_len = min_frag_len; + do { + send_udp_frags(fd_tx_raw, addr, alen, ipv6); + recv_validate_udp(fd_rx_udp); + max_frag_len += 8 * (rand() % 8); + } while (max_frag_len < (1500 - FRAG_HLEN) && + max_frag_len <= payload_len); + } }
/* Cleanup. */ diff --git a/tools/testing/selftests/net/ip_defrag.sh b/tools/testing/selftests/net/ip_defrag.sh index f34672796044..7dd79a9efb17 100755 --- a/tools/testing/selftests/net/ip_defrag.sh +++ b/tools/testing/selftests/net/ip_defrag.sh @@ -11,10 +11,17 @@ readonly NETNS="ns-$(mktemp -u XXXXXX)" setup() { ip netns add "${NETNS}" ip -netns "${NETNS}" link set lo up + ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_high_thresh=9000000 >/dev/null 2>&1 ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_low_thresh=7000000 >/dev/null 2>&1 + ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_time=1 >/dev/null 2>&1 + ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_high_thresh=9000000 >/dev/null 2>&1 ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_low_thresh=7000000 >/dev/null 2>&1 + ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_time=1 >/dev/null 2>&1 + + # DST cache can get full with a lot of frags, with GC not keeping up with the test. + ip netns exec "${NETNS}" sysctl -w net.ipv6.route.max_size=65536 >/dev/null 2>&1 }
cleanup() { @@ -27,7 +34,6 @@ setup echo "ipv4 defrag" ip netns exec "${NETNS}" ./ip_defrag -4
- echo "ipv4 defrag with overlaps" ip netns exec "${NETNS}" ./ip_defrag -4o
@@ -37,3 +43,4 @@ ip netns exec "${NETNS}" ./ip_defrag -6 echo "ipv6 defrag with overlaps" ip netns exec "${NETNS}" ./ip_defrag -6o
+echo "all tests done"
From: Andrey Ignatov rdna@fb.com
[ Upstream commit e8e36984080b55ac5e57bdb09a5b570f2fc8e963 ]
sys_sendmsg has supported unspecified destination IPv6 (wildcard) for unconnected UDP sockets since 876c7f41. When [::] is passed by user as destination, sys_sendmsg rewrites it with [::1] to be consistent with BSD (see "BSD'ism" comment in the code).
This didn't work when cgroup-bpf was enabled though since the rewrite [::] -> [::1] happened before passing control to cgroup-bpf block where fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that might or might not be changed by BPF program). That way if user passed [::] as dst IPv6 it was first rewritten with [::1] by original code from 876c7f41, but then rewritten back with [::] by cgroup-bpf block.
It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present (CONFIG_CGROUP_BPF=y was enough).
The fix is to apply BSD'ism after cgroup-bpf block so that [::] is replaced with [::1] no matter where it came from: passed by user to sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.
Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Reported-by: Nitin Rawat nitin.rawat@intel.com Signed-off-by: Andrey Ignatov rdna@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/udp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index d01ec252cb81..848dd38a907a 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1322,10 +1322,7 @@ do_udp_sendmsg: ipc6.opt = opt;
fl6.flowi6_proto = sk->sk_protocol; - if (!ipv6_addr_any(daddr)) - fl6.daddr = *daddr; - else - fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */ + fl6.daddr = *daddr; if (ipv6_addr_any(&fl6.saddr) && !ipv6_addr_any(&np->saddr)) fl6.saddr = np->saddr; fl6.fl6_sport = inet->inet_sport; @@ -1353,6 +1350,9 @@ do_udp_sendmsg: } }
+ if (ipv6_addr_any(&fl6.daddr)) + fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */ + final_p = fl6_update_dst(&fl6, opt, &final); if (final_p) connected = false;
From: Andrey Ignatov rdna@fb.com
[ Upstream commit 976b4f3a4646fbf0d189caca25f91f82e4be4b5a ]
Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to rewrite destination IPv6 = [::] with [::1] (BSD'ism).
Two test cases are added:
1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program doesn't touch it.
2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program rewrites it with [::].
In both cases [::1] is used by sys_sendmsg code eventually and datagram is sent successfully for unconnected UDP socket.
Example of relevant output: Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS] Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]
Signed-off-by: Andrey Ignatov rdna@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/test_sock_addr.c | 53 ++++++++++++++++++-- 1 file changed, 50 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_sock_addr.c b/tools/testing/selftests/bpf/test_sock_addr.c index aeeb76a54d63..e38f1cb7089d 100644 --- a/tools/testing/selftests/bpf/test_sock_addr.c +++ b/tools/testing/selftests/bpf/test_sock_addr.c @@ -44,6 +44,7 @@ #define SERV6_V4MAPPED_IP "::ffff:192.168.0.4" #define SRC6_IP "::1" #define SRC6_REWRITE_IP "::6" +#define WILDCARD6_IP "::" #define SERV6_PORT 6060 #define SERV6_REWRITE_PORT 6666
@@ -85,12 +86,14 @@ static int bind4_prog_load(const struct sock_addr_test *test); static int bind6_prog_load(const struct sock_addr_test *test); static int connect4_prog_load(const struct sock_addr_test *test); static int connect6_prog_load(const struct sock_addr_test *test); +static int sendmsg_allow_prog_load(const struct sock_addr_test *test); static int sendmsg_deny_prog_load(const struct sock_addr_test *test); static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test); static int sendmsg4_rw_c_prog_load(const struct sock_addr_test *test); static int sendmsg6_rw_asm_prog_load(const struct sock_addr_test *test); static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test); static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test); +static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test);
static struct sock_addr_test tests[] = { /* bind */ @@ -462,6 +465,34 @@ static struct sock_addr_test tests[] = { SRC6_REWRITE_IP, SYSCALL_ENOTSUPP, }, + { + "sendmsg6: set dst IP = [::] (BSD'ism)", + sendmsg6_rw_wildcard_prog_load, + BPF_CGROUP_UDP6_SENDMSG, + BPF_CGROUP_UDP6_SENDMSG, + AF_INET6, + SOCK_DGRAM, + SERV6_IP, + SERV6_PORT, + SERV6_REWRITE_IP, + SERV6_REWRITE_PORT, + SRC6_REWRITE_IP, + SUCCESS, + }, + { + "sendmsg6: preserve dst IP = [::] (BSD'ism)", + sendmsg_allow_prog_load, + BPF_CGROUP_UDP6_SENDMSG, + BPF_CGROUP_UDP6_SENDMSG, + AF_INET6, + SOCK_DGRAM, + WILDCARD6_IP, + SERV6_PORT, + SERV6_REWRITE_IP, + SERV6_PORT, + SRC6_IP, + SUCCESS, + }, { "sendmsg6: deny call", sendmsg_deny_prog_load, @@ -714,16 +745,27 @@ static int connect6_prog_load(const struct sock_addr_test *test) return load_path(test, CONNECT6_PROG_PATH); }
-static int sendmsg_deny_prog_load(const struct sock_addr_test *test) +static int sendmsg_ret_only_prog_load(const struct sock_addr_test *test, + int32_t rc) { struct bpf_insn insns[] = { - /* return 0 */ - BPF_MOV64_IMM(BPF_REG_0, 0), + /* return rc */ + BPF_MOV64_IMM(BPF_REG_0, rc), BPF_EXIT_INSN(), }; return load_insns(test, insns, sizeof(insns) / sizeof(struct bpf_insn)); }
+static int sendmsg_allow_prog_load(const struct sock_addr_test *test) +{ + return sendmsg_ret_only_prog_load(test, /*rc*/ 1); +} + +static int sendmsg_deny_prog_load(const struct sock_addr_test *test) +{ + return sendmsg_ret_only_prog_load(test, /*rc*/ 0); +} + static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test) { struct sockaddr_in dst4_rw_addr; @@ -844,6 +886,11 @@ static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test) return sendmsg6_rw_dst_asm_prog_load(test, SERV6_V4MAPPED_IP); }
+static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test) +{ + return sendmsg6_rw_dst_asm_prog_load(test, WILDCARD6_IP); +} + static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test) { return load_path(test, SENDMSG6_PROG_PATH);
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit 264142bc70ec039e26d8f3b46a717e8037f59ca0 ]
The chip ID is 0xd42[8-f], not 0xd45[8-f].
Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D") Reported-by: Michael Cook mcook@mackal.net Cc: Michael Cook mcook@mackal.net Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/nct6775.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index c3040079b1cb..8f91e366866f 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -44,8 +44,8 @@ * nct6796d 14 7 7 2+6 0xd420 0xc1 0x5ca3 * nct6797d 14 7 7 2+6 0xd450 0xc1 0x5ca3 * (0xd451) - * nct6798d 14 7 7 2+6 0xd458 0xc1 0x5ca3 - * (0xd459) + * nct6798d 14 7 7 2+6 0xd428 0xc1 0x5ca3 + * (0xd429) * * #temp lists the number of monitored temperature sources (first value) plus * the number of directly connectable temperature sensors (second value). @@ -138,7 +138,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define SIO_NCT6795_ID 0xd350 #define SIO_NCT6796_ID 0xd420 #define SIO_NCT6797_ID 0xd450 -#define SIO_NCT6798_ID 0xd458 +#define SIO_NCT6798_ID 0xd428 #define SIO_ID_MASK 0xFFF8
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit 9de15c95a63f527c8f7a968cd95e6ec71fc6891d ]
Similar to other recent chips from Nuvoton, IO mapping may be disabled by default. Enable it when instantiating the driver and after resume.
Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D") Fixes: e41da286a2fd ("hwmon: (nct6775) Add support for NCT6797D") Reported-by: Michael Cook mcook@mackal.net Cc: Michael Cook mcook@mackal.net Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/nct6775.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 8f91e366866f..4adec4ab7d06 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -4508,7 +4508,8 @@ static int __maybe_unused nct6775_resume(struct device *dev)
if (data->kind == nct6791 || data->kind == nct6792 || data->kind == nct6793 || data->kind == nct6795 || - data->kind == nct6796) + data->kind == nct6796 || data->kind == nct6797 || + data->kind == nct6798) nct6791_enable_io_mapping(sioreg);
superio_exit(sioreg); @@ -4644,7 +4645,8 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || sio_data->kind == nct6793 || sio_data->kind == nct6795 || - sio_data->kind == nct6796) + sio_data->kind == nct6796 || sio_data->kind == nct6797 || + sio_data->kind == nct6798) nct6791_enable_io_mapping(sioaddr);
superio_exit(sioaddr);
From: NeilBrown neil@brown.name
[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ]
These files need #include <linux/mod_devicetable.h> to compile correctly.
Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: NeilBrown neil@brown.name Reviewed-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/watchdog/mt7621_wdt.c | 1 + drivers/watchdog/rt2880_wdt.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c index 5c4a764717c4..81208cd3f4ec 100644 --- a/drivers/watchdog/mt7621_wdt.c +++ b/drivers/watchdog/mt7621_wdt.c @@ -17,6 +17,7 @@ #include <linux/watchdog.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> +#include <linux/mod_devicetable.h>
#include <asm/mach-ralink/ralink_regs.h>
diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c index 98967f0a7d10..db7c57d82cfd 100644 --- a/drivers/watchdog/rt2880_wdt.c +++ b/drivers/watchdog/rt2880_wdt.c @@ -18,6 +18,7 @@ #include <linux/watchdog.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> +#include <linux/mod_devicetable.h>
#include <asm/mach-ralink/ralink_regs.h>
From: Stephen Warren swarren@nvidia.com
[ Upstream commit f65e192af35058e5c82da9e90871b472d24912bc ]
This patch solves a crash at the time of mlx4 driver unload or system shutdown. The crash occurs because dma_alloc_coherent() returns one value in mlx4_alloc_icm_coherent(), but a different value is passed to dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because when allocated, that pointer is passed to sg_set_buf() to record it, then when freed it is re-calculated by calling lowmem_page_address(sg_page()) which returns a different value. Solve this by recording the value that dma_alloc_coherent() returns, and passing this to dma_free_coherent().
This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get rid of page operation after dma_alloc_coherent").
Based-on-code-from: Christoph Hellwig hch@lst.de Signed-off-by: Stephen Warren swarren@nvidia.com Reviewed-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx4/icm.c | 92 ++++++++++++++---------- drivers/net/ethernet/mellanox/mlx4/icm.h | 22 +++++- 2 files changed, 75 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c index 4b4351141b94..76b84d08a058 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.c +++ b/drivers/net/ethernet/mellanox/mlx4/icm.c @@ -57,12 +57,12 @@ static void mlx4_free_icm_pages(struct mlx4_dev *dev, struct mlx4_icm_chunk *chu int i;
if (chunk->nsg > 0) - pci_unmap_sg(dev->persist->pdev, chunk->mem, chunk->npages, + pci_unmap_sg(dev->persist->pdev, chunk->sg, chunk->npages, PCI_DMA_BIDIRECTIONAL);
for (i = 0; i < chunk->npages; ++i) - __free_pages(sg_page(&chunk->mem[i]), - get_order(chunk->mem[i].length)); + __free_pages(sg_page(&chunk->sg[i]), + get_order(chunk->sg[i].length)); }
static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *chunk) @@ -71,9 +71,9 @@ static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *
for (i = 0; i < chunk->npages; ++i) dma_free_coherent(&dev->persist->pdev->dev, - chunk->mem[i].length, - lowmem_page_address(sg_page(&chunk->mem[i])), - sg_dma_address(&chunk->mem[i])); + chunk->buf[i].size, + chunk->buf[i].addr, + chunk->buf[i].dma_addr); }
void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent) @@ -111,22 +111,21 @@ static int mlx4_alloc_icm_pages(struct scatterlist *mem, int order, return 0; }
-static int mlx4_alloc_icm_coherent(struct device *dev, struct scatterlist *mem, - int order, gfp_t gfp_mask) +static int mlx4_alloc_icm_coherent(struct device *dev, struct mlx4_icm_buf *buf, + int order, gfp_t gfp_mask) { - void *buf = dma_alloc_coherent(dev, PAGE_SIZE << order, - &sg_dma_address(mem), gfp_mask); - if (!buf) + buf->addr = dma_alloc_coherent(dev, PAGE_SIZE << order, + &buf->dma_addr, gfp_mask); + if (!buf->addr) return -ENOMEM;
- if (offset_in_page(buf)) { - dma_free_coherent(dev, PAGE_SIZE << order, - buf, sg_dma_address(mem)); + if (offset_in_page(buf->addr)) { + dma_free_coherent(dev, PAGE_SIZE << order, buf->addr, + buf->dma_addr); return -ENOMEM; }
- sg_set_buf(mem, buf, PAGE_SIZE << order); - sg_dma_len(mem) = PAGE_SIZE << order; + buf->size = PAGE_SIZE << order; return 0; }
@@ -159,21 +158,21 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
while (npages > 0) { if (!chunk) { - chunk = kmalloc_node(sizeof(*chunk), + chunk = kzalloc_node(sizeof(*chunk), gfp_mask & ~(__GFP_HIGHMEM | __GFP_NOWARN), dev->numa_node); if (!chunk) { - chunk = kmalloc(sizeof(*chunk), + chunk = kzalloc(sizeof(*chunk), gfp_mask & ~(__GFP_HIGHMEM | __GFP_NOWARN)); if (!chunk) goto fail; } + chunk->coherent = coherent;
- sg_init_table(chunk->mem, MLX4_ICM_CHUNK_LEN); - chunk->npages = 0; - chunk->nsg = 0; + if (!coherent) + sg_init_table(chunk->sg, MLX4_ICM_CHUNK_LEN); list_add_tail(&chunk->list, &icm->chunk_list); }
@@ -186,10 +185,10 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
if (coherent) ret = mlx4_alloc_icm_coherent(&dev->persist->pdev->dev, - &chunk->mem[chunk->npages], - cur_order, mask); + &chunk->buf[chunk->npages], + cur_order, mask); else - ret = mlx4_alloc_icm_pages(&chunk->mem[chunk->npages], + ret = mlx4_alloc_icm_pages(&chunk->sg[chunk->npages], cur_order, mask, dev->numa_node);
@@ -205,7 +204,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages, if (coherent) ++chunk->nsg; else if (chunk->npages == MLX4_ICM_CHUNK_LEN) { - chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->mem, + chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->sg, chunk->npages, PCI_DMA_BIDIRECTIONAL);
@@ -220,7 +219,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages, }
if (!coherent && chunk) { - chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->mem, + chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->sg, chunk->npages, PCI_DMA_BIDIRECTIONAL);
@@ -320,7 +319,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, u64 idx; struct mlx4_icm_chunk *chunk; struct mlx4_icm *icm; - struct page *page = NULL; + void *addr = NULL;
if (!table->lowmem) return NULL; @@ -336,28 +335,49 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,
list_for_each_entry(chunk, &icm->chunk_list, list) { for (i = 0; i < chunk->npages; ++i) { + dma_addr_t dma_addr; + size_t len; + + if (table->coherent) { + len = chunk->buf[i].size; + dma_addr = chunk->buf[i].dma_addr; + addr = chunk->buf[i].addr; + } else { + struct page *page; + + len = sg_dma_len(&chunk->sg[i]); + dma_addr = sg_dma_address(&chunk->sg[i]); + + /* XXX: we should never do this for highmem + * allocation. This function either needs + * to be split, or the kernel virtual address + * return needs to be made optional. + */ + page = sg_page(&chunk->sg[i]); + addr = lowmem_page_address(page); + } + if (dma_handle && dma_offset >= 0) { - if (sg_dma_len(&chunk->mem[i]) > dma_offset) - *dma_handle = sg_dma_address(&chunk->mem[i]) + - dma_offset; - dma_offset -= sg_dma_len(&chunk->mem[i]); + if (len > dma_offset) + *dma_handle = dma_addr + dma_offset; + dma_offset -= len; } + /* * DMA mapping can merge pages but not split them, * so if we found the page, dma_handle has already * been assigned to. */ - if (chunk->mem[i].length > offset) { - page = sg_page(&chunk->mem[i]); + if (len > offset) goto out; - } - offset -= chunk->mem[i].length; + offset -= len; } }
+ addr = NULL; out: mutex_unlock(&table->mutex); - return page ? lowmem_page_address(page) + offset : NULL; + return addr ? addr + offset : NULL; }
int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h index c9169a490557..d199874b1c07 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.h +++ b/drivers/net/ethernet/mellanox/mlx4/icm.h @@ -47,11 +47,21 @@ enum { MLX4_ICM_PAGE_SIZE = 1 << MLX4_ICM_PAGE_SHIFT, };
+struct mlx4_icm_buf { + void *addr; + size_t size; + dma_addr_t dma_addr; +}; + struct mlx4_icm_chunk { struct list_head list; int npages; int nsg; - struct scatterlist mem[MLX4_ICM_CHUNK_LEN]; + bool coherent; + union { + struct scatterlist sg[MLX4_ICM_CHUNK_LEN]; + struct mlx4_icm_buf buf[MLX4_ICM_CHUNK_LEN]; + }; };
struct mlx4_icm { @@ -114,12 +124,18 @@ static inline void mlx4_icm_next(struct mlx4_icm_iter *iter)
static inline dma_addr_t mlx4_icm_addr(struct mlx4_icm_iter *iter) { - return sg_dma_address(&iter->chunk->mem[iter->page_idx]); + if (iter->chunk->coherent) + return iter->chunk->buf[iter->page_idx].dma_addr; + else + return sg_dma_address(&iter->chunk->sg[iter->page_idx]); }
static inline unsigned long mlx4_icm_size(struct mlx4_icm_iter *iter) { - return sg_dma_len(&iter->chunk->mem[iter->page_idx]); + if (iter->chunk->coherent) + return iter->chunk->buf[iter->page_idx].size; + else + return sg_dma_len(&iter->chunk->sg[iter->page_idx]); }
int mlx4_MAP_ICM_AUX(struct mlx4_dev *dev, struct mlx4_icm *icm);
From: Alban Bedel albeu@free.fr
[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]
CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box.
Signed-off-by: Alban Bedel albeu@free.fr Signed-off-by: Paul Burton paul.burton@mips.com Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/configs/ath79_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig index 951c4231bdb8..4c47b3fd958b 100644 --- a/arch/mips/configs/ath79_defconfig +++ b/arch/mips/configs/ath79_defconfig @@ -71,6 +71,7 @@ CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AR933X=y CONFIG_SERIAL_AR933X_CONSOLE=y # CONFIG_HW_RANDOM is not set
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 6e17f58c486d9554341f70aa5b63b8fbed07b3fa ]
The clean up is handled by the caller, rpcrdma_buffer_create(), so this call to rpcrdma_sendctxs_destroy() leads to a double free.
Fixes: ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/xprtrdma/verbs.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index b9bc7f9f6bb9..4ffa6db804bb 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -913,17 +913,13 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt) for (i = 0; i <= buf->rb_sc_last; i++) { sc = rpcrdma_sendctx_create(&r_xprt->rx_ia); if (!sc) - goto out_destroy; + return -ENOMEM;
sc->sc_xprt = r_xprt; buf->rb_sc_ctxs[i] = sc; }
return 0; - -out_destroy: - rpcrdma_sendctxs_destroy(buf); - return -ENOMEM; }
/* The sendctx queue is not guaranteed to have a size that is a
From: Nir Dotan nird@mellanox.com
[ Upstream commit ff0db43cd6c530ff944773ccf48ece55d32d0c22 ]
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert(). In case of C-TCAM HW insertion error, the opposite action should take place. Add error handling case in which the C-TCAM region entry is removed, by calling cregion->ops->entry_remove().
Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM") Signed-off-by: Nir Dotan nird@mellanox.com Reviewed-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c index e3c6fe8b1d40..1dcf152b2813 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c @@ -75,7 +75,15 @@ mlxsw_sp_acl_ctcam_region_entry_insert(struct mlxsw_sp *mlxsw_sp, act_set = mlxsw_afa_block_first_set(rulei->act_block); mlxsw_reg_ptce2_flex_action_set_memcpy_to(ptce2_pl, act_set);
- return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptce2), ptce2_pl); + err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptce2), ptce2_pl); + if (err) + goto err_ptce2_write; + + return 0; + +err_ptce2_write: + cregion->ops->entry_remove(cregion, centry); + return err; }
static void
From: Ido Schimmel idosch@mellanox.com
[ Upstream commit 143a8e038ac599ca73c6354c8af6a8fdeee9fa7d ]
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in:
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined reference to `vxlan_fdb_find_uc'
Add Kconfig dependency to enforce usable configurations.
Fixes: 1231e04f5bba ("mlxsw: spectrum_switchdev: Add support for VxLAN encapsulation") Signed-off-by: Ido Schimmel idosch@mellanox.com Reported-by: kbuild test robot lkp@intel.com Reviewed-by: Petr Machata petrm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlxsw/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig index 8a291eb36c64..7338c9bac4e6 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig +++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig @@ -78,6 +78,7 @@ config MLXSW_SPECTRUM depends on IPV6 || IPV6=n depends on NET_IPGRE || NET_IPGRE=n depends on IPV6_GRE || IPV6_GRE=n + depends on VXLAN || VXLAN=n select GENERIC_ALLOCATOR select PARMAN select MLXFW
From: Ido Schimmel idosch@mellanox.com
[ Upstream commit 4fabf3bf93a194c7fa5288da3e0af37e4b943cf3 ]
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected.
Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/net/forwarding/bridge_vlan_aware.sh | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index d8313d0438b7..04c6431b2bd8 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0
-ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding" +ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion" NUM_NETIFS=4 CHECK_TC="yes" source lib.sh @@ -96,6 +96,19 @@ flooding() flood_test $swp2 $h1 $h2 }
+vlan_deletion() +{ + # Test that the deletion of a VLAN on a bridge port does not affect + # the PVID VLAN + log_info "Add and delete a VLAN on bridge port $swp1" + + bridge vlan add vid 10 dev $swp1 + bridge vlan del vid 10 dev $swp1 + + ping_ipv4 + ping_ipv6 +} + trap cleanup EXIT
setup_prepare
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit b91d9036883793122cf6575ca4dfbfbdd201a83d ]
There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects.
Test commands: $nft add table ip filter $nft add counter ip filter c1 $nft add map ip filter m1 { type ipv4_addr : counter ;} $nft add element ip filter m1 { 1 : c1 } $nft add element ip filter m1 { 1 : c1 } $nft delete element ip filter m1 { 1 } $nft delete counter ip filter c1
Result: Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST. But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'.
Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 6e548d7c9f67..aba6ec4a14ce 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4474,6 +4474,8 @@ err6: err5: kfree(trans); err4: + if (obj) + obj->use--; kfree(elem.priv); err3: if (nla[NFTA_SET_ELEM_DATA] != NULL)
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]
The return code should be check while qla4xxx_copy_from_fwddb_param fails.
Signed-off-by: YueHaibing yuehaibing@huawei.com Acked-by: Manish Rangankar mrangankar@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla4xxx/ql4_os.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 051164f755a4..a13396c56a6a 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -7237,6 +7237,8 @@ static int qla4xxx_sysfs_ddb_tgt_create(struct scsi_qla_host *ha,
rc = qla4xxx_copy_from_fwddb_param(fnode_sess, fnode_conn, fw_ddb_entry); + if (rc) + goto free_sess;
ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n", __func__, fnode_sess->dev.kobj.name);
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur.
However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed.
The bug was noticed after the struct request size was reduced by commit 9d037ad707ed ("block: remove req->timeout_list")
Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at:
RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ>
sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete().
To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard().
Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com Signed-off-by: Logan Gunthorpe logang@deltatee.com Cc: Intel SCU Linux support intel-linux-scu@intel.com Cc: Artur Paszkiewicz artur.paszkiewicz@intel.com Cc: "James E.J. Bottomley" jejb@linux.ibm.com Cc: "Martin K. Petersen" martin.petersen@oracle.com Cc: Christoph Hellwig hch@lst.de Cc: Jens Axboe axboe@kernel.dk Cc: Jeff Moyer jmoyer@redhat.com Reviewed-by: Jeff Moyer jmoyer@redhat.com Reviewed-by: Jens Axboe axboe@kernel.dk Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/isci/init.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 08c7b1e25fe4..dde84f744313 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -588,6 +588,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) shost->max_lun = ~0; shost->max_cmd_len = MAX_COMMAND_SIZE;
+ /* turn on DIF support */ + scsi_host_set_prot(shost, + SHOST_DIF_TYPE1_PROTECTION | + SHOST_DIF_TYPE2_PROTECTION | + SHOST_DIF_TYPE3_PROTECTION); + scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); + err = scsi_add_host(shost, &pdev->dev); if (err) goto err_shost; @@ -675,13 +682,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_host_alloc; } pci_info->hosts[i] = h; - - /* turn on DIF support */ - scsi_host_set_prot(to_shost(h), - SHOST_DIF_TYPE1_PROTECTION | - SHOST_DIF_TYPE2_PROTECTION | - SHOST_DIF_TYPE3_PROTECTION); - scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC); }
err = isci_setup_interrupts(pdev);
From: "Michael S. Tsirkin" mst@redhat.com
[ Upstream commit 3e2ffd655cc6a694608d997738989ff5572a8266 ]
Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable.
Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef.
Also fix up comments to match reality since we are no longer overriding any macros.
Build-tested with gcc and clang.
Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Eli Friedman efriedma@codeaurora.org Cc: Joe Perches joe@perches.com Cc: Linus Torvalds torvalds@linux-foundation.org Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Miguel Ojeda miguel.ojeda.sandonis@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/compiler-clang.h | 5 ++--- include/linux/compiler-gcc.h | 4 ---- include/linux/compiler-intel.h | 4 +--- include/linux/compiler.h | 4 +++- 4 files changed, 6 insertions(+), 11 deletions(-)
diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index 3e7dafb3ea80..7ddaeb5182e3 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -3,9 +3,8 @@ #error "Please don't include <linux/compiler-clang.h> directly, include <linux/compiler.h> instead." #endif
-/* Some compiler specific definitions are overwritten here - * for Clang compiler - */ +/* Compiler specific definitions for Clang compiler */ + #define uninitialized_var(x) x = *(&(x))
/* same as gcc, this was present in clang-2.6 so we can assume it works diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 977ddf2774f9..c61c4bb2bd15 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -58,10 +58,6 @@ (typeof(ptr)) (__ptr + (off)); \ })
-/* Make the optimizer believe the variable can be manipulated arbitrarily. */ -#define OPTIMIZER_HIDE_VAR(var) \ - __asm__ ("" : "=r" (var) : "0" (var)) - /* * A trick to suppress uninitialized variable warning without generating any * code diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index 517bd14e1222..b17f3cd18334 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -5,9 +5,7 @@
#ifdef __ECC
-/* Some compiler specific definitions are overwritten here - * for Intel ECC compiler - */ +/* Compiler specific definitions for Intel ECC compiler */
#include <asm/intrinsics.h>
diff --git a/include/linux/compiler.h b/include/linux/compiler.h index fc5004a4b07d..445348facea9 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -161,7 +161,9 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, #endif
#ifndef OPTIMIZER_HIDE_VAR -#define OPTIMIZER_HIDE_VAR(var) barrier() +/* Make the optimizer believe the variable can be manipulated arbitrarily. */ +#define OPTIMIZER_HIDE_VAR(var) \ + __asm__ ("" : "=r" (var) : "0" (var)) #endif
/* Not-quite-unique ID. */
From: Thomas Bogendoerfer tbogendoerfer@suse.de
[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]
64bit JAZZ builds failed with
linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this.
Signed-off-by: Thomas Bogendoerfer tbogendoerfer@suse.de Signed-off-by: Paul Burton paul.burton@mips.com Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/jazz/jazzdma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index 4c41ed0a637e..415a08376c36 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -74,14 +74,15 @@ static int __init vdma_init(void) get_order(VDMA_PGTBL_SIZE)); BUG_ON(!pgtbl); dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE); - pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); + pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
/* * Clear the R4030 translation table */ vdma_pgtbl_init();
- r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); + r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, + CPHYSADDR((unsigned long)pgtbl)); r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE); r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
From: wenxu wenxu@ucloud.cn
[ Upstream commit a799aea0988ea0d1b1f263e996fdad2f6133c680 ]
Using the following example:
client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server
The first reply packet (ie. syn+ack) uses an incorrect destination address for the reverse route lookup since it uses:
daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;
which is 2.2.2.7 in the scenario that is described above, while this should be:
daddr = ct->tuplehash[dir].tuple.src.u3.ip;
that is 10.0.0.7.
Signed-off-by: wenxu wenxu@ucloud.cn Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_flow_offload.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c index 974525eb92df..ccdb8f5ababb 100644 --- a/net/netfilter/nft_flow_offload.c +++ b/net/netfilter/nft_flow_offload.c @@ -29,10 +29,10 @@ static int nft_flow_route(const struct nft_pktinfo *pkt, memset(&fl, 0, sizeof(fl)); switch (nft_pf(pkt)) { case NFPROTO_IPV4: - fl.u.ip4.daddr = ct->tuplehash[!dir].tuple.dst.u3.ip; + fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip; break; case NFPROTO_IPV6: - fl.u.ip6.daddr = ct->tuplehash[!dir].tuple.dst.u3.in6; + fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6; break; }
From: Yuchung Cheng ycheng@google.com
[ Upstream commit 31aa6503a15ba00182ea6dbbf51afb63bf9e851d ]
The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally.
Fixes: fc7478103c84 ("bpf: Adds support for setting initial cwnd") Signed-off-by: Yuchung Cheng ycheng@google.com Reviewed-by: Neal Cardwell ncardwell@google.com Acked-by: Lawrence Brakmo brakmo@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/filter.c b/net/core/filter.c index eb0007f30142..fa9452406f21 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -4019,7 +4019,7 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock, /* Only some options are supported */ switch (optname) { case TCP_BPF_IW: - if (val <= 0 || tp->data_segs_out > 0) + if (val <= 0 || tp->data_segs_out > tp->syn_data) ret = -EINVAL; else tp->snd_cwnd = val;
From: Wen Yang wen.yang99@zte.com.cn
[ Upstream commit 9f51c05dc41a6d69423e3d03d18eb7ab22f9ec19 ]
The problem is that we call this with a spin lock held. The call tree is: pvcalls_front_accept() holds bedata->socket_lock. -> create_active() -> __get_free_pages() uses GFP_KERNEL
The create_active() function is only called from pvcalls_front_accept() with a spin_lock held, The allocation is not allowed to sleep and GFP_KERNEL is not sufficient.
This issue was detected by using the Coccinelle software.
v2: Add a function doing the allocations which is called outside the lock and passing the allocated data to create_active().
v3: Use the matching deallocators i.e., free_page() and free_pages(), respectively.
v4: It would be better to pre-populate map (struct sock_mapping), rather than introducing one more new struct.
v5: Since allocating the data outside of this call it should also be freed outside, when create_active() fails. Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and use GFP_KERNEL instead.
v6: Drop the superfluous calls.
Suggested-by: Juergen Gross jgross@suse.com Suggested-by: Boris Ostrovsky boris.ostrovsky@oracle.com Suggested-by: Stefano Stabellini sstabellini@kernel.org Signed-off-by: Wen Yang wen.yang99@zte.com.cn Acked-by: Stefano Stabellini sstabellini@kernel.org CC: Julia Lawall julia.lawall@lip6.fr CC: Boris Ostrovsky boris.ostrovsky@oracle.com CC: Juergen Gross jgross@suse.com CC: Stefano Stabellini sstabellini@kernel.org CC: xen-devel@lists.xenproject.org CC: linux-kernel@vger.kernel.org Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-front.c | 81 +++++++++++++++++++++++++++---------- 1 file changed, 59 insertions(+), 22 deletions(-)
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c index 01588582ae66..6357160d466a 100644 --- a/drivers/xen/pvcalls-front.c +++ b/drivers/xen/pvcalls-front.c @@ -341,6 +341,39 @@ int pvcalls_front_socket(struct socket *sock) return ret; }
+static void free_active_ring(struct sock_mapping *map) +{ + free_pages((unsigned long)map->active.data.in, + map->active.ring->ring_order); + free_page((unsigned long)map->active.ring); +} + +static int alloc_active_ring(struct sock_mapping *map) +{ + void *bytes; + + map->active.ring = (struct pvcalls_data_intf *) + get_zeroed_page(GFP_KERNEL); + if (!map->active.ring) + goto out; + + map->active.ring->ring_order = PVCALLS_RING_ORDER; + bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + PVCALLS_RING_ORDER); + if (!bytes) + goto out; + + map->active.data.in = bytes; + map->active.data.out = bytes + + XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER); + + return 0; + +out: + free_active_ring(map); + return -ENOMEM; +} + static int create_active(struct sock_mapping *map, int *evtchn) { void *bytes; @@ -349,15 +382,7 @@ static int create_active(struct sock_mapping *map, int *evtchn) *evtchn = -1; init_waitqueue_head(&map->active.inflight_conn_req);
- map->active.ring = (struct pvcalls_data_intf *) - __get_free_page(GFP_KERNEL | __GFP_ZERO); - if (map->active.ring == NULL) - goto out_error; - map->active.ring->ring_order = PVCALLS_RING_ORDER; - bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, - PVCALLS_RING_ORDER); - if (bytes == NULL) - goto out_error; + bytes = map->active.data.in; for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++) map->active.ring->ref[i] = gnttab_grant_foreign_access( pvcalls_front_dev->otherend_id, @@ -367,10 +392,6 @@ static int create_active(struct sock_mapping *map, int *evtchn) pvcalls_front_dev->otherend_id, pfn_to_gfn(virt_to_pfn((void *)map->active.ring)), 0);
- map->active.data.in = bytes; - map->active.data.out = bytes + - XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER); - ret = xenbus_alloc_evtchn(pvcalls_front_dev, evtchn); if (ret) goto out_error; @@ -391,8 +412,6 @@ static int create_active(struct sock_mapping *map, int *evtchn) out_error: if (*evtchn >= 0) xenbus_free_evtchn(pvcalls_front_dev, *evtchn); - free_pages((unsigned long)map->active.data.in, PVCALLS_RING_ORDER); - free_page((unsigned long)map->active.ring); return ret; }
@@ -412,17 +431,24 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr, return PTR_ERR(map);
bedata = dev_get_drvdata(&pvcalls_front_dev->dev); + ret = alloc_active_ring(map); + if (ret < 0) { + pvcalls_exit_sock(sock); + return ret; + }
spin_lock(&bedata->socket_lock); ret = get_request(bedata, &req_id); if (ret < 0) { spin_unlock(&bedata->socket_lock); + free_active_ring(map); pvcalls_exit_sock(sock); return ret; } ret = create_active(map, &evtchn); if (ret < 0) { spin_unlock(&bedata->socket_lock); + free_active_ring(map); pvcalls_exit_sock(sock); return ret; } @@ -784,25 +810,36 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags) } }
- spin_lock(&bedata->socket_lock); - ret = get_request(bedata, &req_id); - if (ret < 0) { + map2 = kzalloc(sizeof(*map2), GFP_KERNEL); + if (map2 == NULL) { clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags); - spin_unlock(&bedata->socket_lock); + pvcalls_exit_sock(sock); + return -ENOMEM; + } + ret = alloc_active_ring(map2); + if (ret < 0) { + clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, + (void *)&map->passive.flags); + kfree(map2); pvcalls_exit_sock(sock); return ret; } - map2 = kzalloc(sizeof(*map2), GFP_ATOMIC); - if (map2 == NULL) { + spin_lock(&bedata->socket_lock); + ret = get_request(bedata, &req_id); + if (ret < 0) { clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags); spin_unlock(&bedata->socket_lock); + free_active_ring(map2); + kfree(map2); pvcalls_exit_sock(sock); - return -ENOMEM; + return ret; } + ret = create_active(map2, &evtchn); if (ret < 0) { + free_active_ring(map2); kfree(map2); clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags);
From: Anders Roxell anders.roxell@linaro.org
[ Upstream commit f98937c6bb73ae11717a15aec85c187d33ca5d34 ]
When test_tcpbpf_user runs it complains that it can't find files tcp_server.py and tcp_client.py.
Rework so that tcp_server.py and tcp_client.py gets installed, added them to the variable TEST_PROGS_EXTENDED.
Fixes: d6d4f60c3a09 ("bpf: add selftest for tcpbpf") Signed-off-by: Anders Roxell anders.roxell@linaro.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index ecd79b7fb107..74ece4f9fcce 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -53,7 +53,9 @@ TEST_PROGS := test_kmod.sh \ test_flow_dissector.sh \ test_xdp_vlan.sh
-TEST_PROGS_EXTENDED := with_addr.sh +TEST_PROGS_EXTENDED := with_addr.sh \ + tcp_client.py \ + tcp_server.py
# Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
From: Song Liu songliubraving@fb.com
[ Upstream commit beaf3d1901f4ea46fbd5c9d857227d99751de469 ]
As Naresh reported, test_stacktrace_build_id() causes panic on i386 and arm32 systems. This is caused by page_address() returns NULL in certain cases.
This patch fixes this error by using kmap_atomic/kunmap_atomic instead of page_address.
Fixes: 615755a77b24 (" bpf: extend stackmap to save binary_build_id+offset instead of address") Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Signed-off-by: Song Liu songliubraving@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/stackmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c index 90daf285de03..d9e2483669d0 100644 --- a/kernel/bpf/stackmap.c +++ b/kernel/bpf/stackmap.c @@ -260,7 +260,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma, return -EFAULT; /* page not mapped */
ret = -EINVAL; - page_addr = page_address(page); + page_addr = kmap_atomic(page); ehdr = (Elf32_Ehdr *)page_addr;
/* compare magic x7f "ELF" */ @@ -276,6 +276,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma, else if (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ret = stack_map_get_build_id_64(page_addr, build_id); out: + kunmap_atomic(page_addr); put_page(page); return ret; }
From: Marc Dionne marc.dionne@auristor.com
[ Upstream commit 5edc22cc1d33d6a88d175d25adc38d2a5cee134d ]
A lock type of 0 is "LockRead", which makes the fileserver record an unintentional read lock on the new file. This will cause problems later on if the file is the subject of locking operations.
The correct default value should be -1 ("LockNone").
Fix the operation marshalling code to set the value and provide an enum to symbolise the values whilst we're at it.
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client") Signed-off-by: Marc Dionne marc.dionne@auristor.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/protocol_yfs.h | 11 +++++++++++ fs/afs/yfsclient.c | 2 +- 2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/fs/afs/protocol_yfs.h b/fs/afs/protocol_yfs.h index 07bc10f076aa..d443e2bfa094 100644 --- a/fs/afs/protocol_yfs.h +++ b/fs/afs/protocol_yfs.h @@ -161,3 +161,14 @@ struct yfs_xdr_YFSStoreVolumeStatus { struct yfs_xdr_u64 max_quota; struct yfs_xdr_u64 file_quota; } __packed; + +enum yfs_lock_type { + yfs_LockNone = -1, + yfs_LockRead = 0, + yfs_LockWrite = 1, + yfs_LockExtend = 2, + yfs_LockRelease = 3, + yfs_LockMandatoryRead = 0x100, + yfs_LockMandatoryWrite = 0x101, + yfs_LockMandatoryExtend = 0x102, +}; diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c index 12658c1363ae..5aa57929e8c2 100644 --- a/fs/afs/yfsclient.c +++ b/fs/afs/yfsclient.c @@ -803,7 +803,7 @@ int yfs_fs_create_file(struct afs_fs_cursor *fc, bp = xdr_encode_YFSFid(bp, &vnode->fid); bp = xdr_encode_string(bp, name, namesz); bp = xdr_encode_YFSStoreStatus_mode(bp, mode); - bp = xdr_encode_u32(bp, 0); /* ViceLockType */ + bp = xdr_encode_u32(bp, yfs_LockNone); /* ViceLockType */ yfs_check_req(call, bp);
afs_use_fs_server(call, fc->cbi);
From: wenxu wenxu@ucloud.cn
[ Upstream commit 10f4e765879e514e1ce7f52ed26603047af196e2 ]
In the forward chain, the iif is changed from slave device to master vrf device. Thus, flow offload does not find a match on the lower slave device.
This patch uses the cached route, ie. dst->dev, to update the iif and oif fields in the flow entry.
After this patch, the following example works fine:
# ip addr add dev eth0 1.1.1.1/24 # ip addr add dev eth1 10.0.0.1/24 # ip link add user1 type vrf table 1 # ip l set user1 up # ip l set dev eth0 master user1 # ip l set dev eth1 master user1
# nft add table firewall # nft add flowtable f fb1 { hook ingress priority 0 ; devices = { eth0, eth1 } ; } # nft add chain f ftb-all {type filter hook forward priority 0 ; policy accept ; } # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1
Signed-off-by: wenxu wenxu@ucloud.cn Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_flow_table.h | 1 - net/netfilter/nf_flow_table_core.c | 5 +++-- net/netfilter/nft_flow_offload.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h index 77e2761d4f2f..ff4eb9869e5b 100644 --- a/include/net/netfilter/nf_flow_table.h +++ b/include/net/netfilter/nf_flow_table.h @@ -84,7 +84,6 @@ struct flow_offload { struct nf_flow_route { struct { struct dst_entry *dst; - int ifindex; } tuple[FLOW_OFFLOAD_DIR_MAX]; };
diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c index b7a4816add76..cc91b4d6aa22 100644 --- a/net/netfilter/nf_flow_table_core.c +++ b/net/netfilter/nf_flow_table_core.c @@ -28,6 +28,7 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct, { struct flow_offload_tuple *ft = &flow->tuplehash[dir].tuple; struct nf_conntrack_tuple *ctt = &ct->tuplehash[dir].tuple; + struct dst_entry *other_dst = route->tuple[!dir].dst; struct dst_entry *dst = route->tuple[dir].dst;
ft->dir = dir; @@ -50,8 +51,8 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct, ft->src_port = ctt->src.u.tcp.port; ft->dst_port = ctt->dst.u.tcp.port;
- ft->iifidx = route->tuple[dir].ifindex; - ft->oifidx = route->tuple[!dir].ifindex; + ft->iifidx = other_dst->dev->ifindex; + ft->oifidx = dst->dev->ifindex; ft->dst_cache = dst; }
diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c index ccdb8f5ababb..188c6bbf4e16 100644 --- a/net/netfilter/nft_flow_offload.c +++ b/net/netfilter/nft_flow_offload.c @@ -30,9 +30,11 @@ static int nft_flow_route(const struct nft_pktinfo *pkt, switch (nft_pf(pkt)) { case NFPROTO_IPV4: fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip; + fl.u.ip4.flowi4_oif = nft_in(pkt)->ifindex; break; case NFPROTO_IPV6: fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6; + fl.u.ip6.flowi6_oif = nft_in(pkt)->ifindex; break; }
@@ -41,9 +43,7 @@ static int nft_flow_route(const struct nft_pktinfo *pkt, return -ENOENT;
route->tuple[dir].dst = this_dst; - route->tuple[dir].ifindex = nft_in(pkt)->ifindex; route->tuple[!dir].dst = other_dst; - route->tuple[!dir].ifindex = nft_out(pkt)->ifindex;
return 0; }
From: Leon Romanovsky leonro@mellanox.com
[ Upstream commit 9d9f59b4204bc41896c866b3e5856e5b416aa199 ]
As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp().
CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64 Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib] RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core] RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699 RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20 RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400 R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000 FS: 0000000000000000(0000) GS:ffff8d1bf7ac0000(0000) knlGS:0000000000000000 Trace: ib_destroy_qp+0xc9/0x240 [ib_core] ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib] process_one_work+0x1a1/0x3a0 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40
Reported-by: Alexander Murashkin AlexanderMurashkin@msn.com Tested-by: Alexander Murashkin AlexanderMurashkin@msn.com Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp") Signed-off-by: Parav Pandit parav@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mthca/mthca_provider.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 691c6f048938..2428c7d89c6b 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -533,7 +533,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd, { struct mthca_ucontext *context;
- qp = kmalloc(sizeof *qp, GFP_KERNEL); + qp = kzalloc(sizeof(*qp), GFP_KERNEL); if (!qp) return ERR_PTR(-ENOMEM);
@@ -599,7 +599,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd, if (pd->uobject) return ERR_PTR(-EINVAL);
- qp = kmalloc(sizeof (struct mthca_sqp), GFP_KERNEL); + qp = kzalloc(sizeof(struct mthca_sqp), GFP_KERNEL); if (!qp) return ERR_PTR(-ENOMEM);
From: Christophe Leroy christophe.leroy@c-s.fr
[ Upstream commit fb0bdec51a4901b7dd088de0a1e365e1b9f5cd21 ]
Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI.
Fixes: 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") Signed-off-by: Christophe Leroy christophe.leroy@c-s.fr Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/head_8xx.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 3b67b9533c82..438512759e82 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -927,11 +927,12 @@ start_here:
/* set up the PTE pointers for the Abatron bdiGDB. */ - tovirt(r6,r6) lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l stw r5, 0xf0(0) /* Must match your Abatron config file */ tophys(r5,r5) + lis r6, swapper_pg_dir@h + ori r6, r6, swapper_pg_dir@l stw r6, 0(r5)
/* Now turn on the MMU for real! */
From: Tony Luck tony.luck@intel.com
[ Upstream commit 0919871ac37fdcf46c7657da0f1742efe096b399 ]
Possible race accessing memdev structures after dropping the mutex. Dan Williams says this could race against another thread that is doing:
# echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind
Reported-by: Jane Chu jane.chu@oracle.com Fixes: 23222f8f8dce ("acpi, nfit: Add function to look up nvdimm...") Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/nfit/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 8535e7999769..2a2d7ec77252 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -724,6 +724,7 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags) struct acpi_nfit_memory_map *memdev; struct acpi_nfit_desc *acpi_desc; struct nfit_mem *nfit_mem; + u16 physical_id;
mutex_lock(&acpi_desc_lock); list_for_each_entry(acpi_desc, &acpi_descs, list) { @@ -731,10 +732,11 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags) list_for_each_entry(nfit_mem, &acpi_desc->dimms, list) { memdev = __to_nfit_memdev(nfit_mem); if (memdev->device_handle == device_handle) { + *flags = memdev->flags; + physical_id = memdev->physical_id; mutex_unlock(&acpi_desc->init_mutex); mutex_unlock(&acpi_desc_lock); - *flags = memdev->flags; - return memdev->physical_id; + return physical_id; } } mutex_unlock(&acpi_desc->init_mutex);
From: Jose Abreu jose.abreu@synopsys.com
[ Upstream commit 6dea7e1881fd86b80da64e476ac398008daed857 ]
Since commit b7d0f08e9129, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac.
Fix this by manually unmapping regions on remove callback.
Changes from v1: - Fix build error
Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Jose Abreu joabreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index c54a50dbd5ac..d819e8eaba12 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -299,7 +299,17 @@ static int stmmac_pci_probe(struct pci_dev *pdev, */ static void stmmac_pci_remove(struct pci_dev *pdev) { + int i; + stmmac_dvr_remove(&pdev->dev); + + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + pcim_iounmap_regions(pdev, BIT(i)); + break; + } + pci_disable_device(pdev); }
From: Jose Abreu jose.abreu@synopsys.com
[ Upstream commit fcc509eb10ff4794641e6ad3082118287a750d0a ]
In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts.
Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Jose Abreu joabreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c index 6c5092e7771c..c5e25580a43f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c @@ -263,6 +263,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x, u32 chan) { u32 intr_status = readl(ioaddr + XGMAC_DMA_CH_STATUS(chan)); + u32 intr_en = readl(ioaddr + XGMAC_DMA_CH_INT_EN(chan)); int ret = 0;
/* ABNORMAL interrupts */ @@ -282,8 +283,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, x->normal_irq_n++;
if (likely(intr_status & XGMAC_RI)) { - u32 value = readl(ioaddr + XGMAC_DMA_CH_INT_EN(chan)); - if (likely(value & XGMAC_RIE)) { + if (likely(intr_en & XGMAC_RIE)) { x->rx_normal_irq_n++; ret |= handle_rx; } @@ -295,7 +295,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, }
/* Clear interrupts */ - writel(~0x0, ioaddr + XGMAC_DMA_CH_STATUS(chan)); + writel(intr_en & intr_status, ioaddr + XGMAC_DMA_CH_STATUS(chan));
return ret; }
From: Jose Abreu jose.abreu@synopsys.com
[ Upstream commit 0650d4017f4d2eee67230a02285a7ae5204240c2 ]
Check if CBS is currently supported before trying to configure it in HW.
Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Jose Abreu joabreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index 531294f4978b..58ea18af9813 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -301,6 +301,8 @@ static int tc_setup_cbs(struct stmmac_priv *priv, /* Queue 0 is not AVB capable */ if (queue <= 0 || queue >= tx_queues_count) return -EINVAL; + if (!priv->dma_cap.av) + return -EOPNOTSUPP; if (priv->speed != SPEED_100 && priv->speed != SPEED_1000) return -EOPNOTSUPP;
From: Jose Abreu jose.abreu@synopsys.com
[ Upstream commit 3b5094665e273c4a2a99f7f5f16977c0f1e19095 ]
RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not.
Fix this by checking earlier if user wants Watchdog disabled or not.
Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Jose Abreu joabreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c4a35e932f05..fe9240e15aea 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4194,6 +4194,18 @@ static int stmmac_hw_init(struct stmmac_priv *priv) return ret; }
+ /* Rx Watchdog is available in the COREs newer than the 3.40. + * In some case, for example on bugged HW this feature + * has to be disable and this can be done by passing the + * riwt_off field from the platform. + */ + if (((priv->synopsys_id >= DWMAC_CORE_3_50) || + (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) { + priv->use_riwt = 1; + dev_info(priv->device, + "Enable RX Mitigation via HW Watchdog Timer\n"); + } + return 0; }
@@ -4326,18 +4338,6 @@ int stmmac_dvr_probe(struct device *device, if (flow_ctrl) priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
- /* Rx Watchdog is available in the COREs newer than the 3.40. - * In some case, for example on bugged HW this feature - * has to be disable and this can be done by passing the - * riwt_off field from the platform. - */ - if (((priv->synopsys_id >= DWMAC_CORE_3_50) || - (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) { - priv->use_riwt = 1; - dev_info(priv->device, - "Enable RX Mitigation via HW Watchdog Timer\n"); - } - /* Setup channels NAPI */ maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
From: Jose Abreu jose.abreu@synopsys.com
[ Upstream commit fa0be0a43f101888ac677dba31b590963eafeaa1 ]
Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget.
This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low.
Let's give always the same budget for RX and TX clean.
While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status.
Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Jose Abreu joabreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 27 ++++++++++--------- 1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index fe9240e15aea..5d83d6a7694b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3525,27 +3525,28 @@ static int stmmac_napi_poll(struct napi_struct *napi, int budget) struct stmmac_channel *ch = container_of(napi, struct stmmac_channel, napi); struct stmmac_priv *priv = ch->priv_data; - int work_done = 0, work_rem = budget; + int work_done, rx_done = 0, tx_done = 0; u32 chan = ch->index;
priv->xstats.napi_poll++;
- if (ch->has_tx) { - int done = stmmac_tx_clean(priv, work_rem, chan); + if (ch->has_tx) + tx_done = stmmac_tx_clean(priv, budget, chan); + if (ch->has_rx) + rx_done = stmmac_rx(priv, budget, chan);
- work_done += done; - work_rem -= done; - } - - if (ch->has_rx) { - int done = stmmac_rx(priv, work_rem, chan); + work_done = max(rx_done, tx_done); + work_done = min(work_done, budget);
- work_done += done; - work_rem -= done; - } + if (work_done < budget && napi_complete_done(napi, work_done)) { + int stat;
- if (work_done < budget && napi_complete_done(napi, work_done)) stmmac_enable_dma_irq(priv, priv->ioaddr, chan); + stat = stmmac_dma_interrupt_status(priv, priv->ioaddr, + &priv->xstats, chan); + if (stat && napi_reschedule(napi)) + stmmac_disable_dma_irq(priv, priv->ioaddr, chan); + }
return work_done; }
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]
The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed.
isdn_tty_tiocmset isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr);
isdn_tty_set_termios isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr);
Thus, some concurrency double-free bugs may occur.
These possible bugs are found by a static tool written by myself and my manual code review.
To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios().
Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/i4l/isdn_tty.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index 1b2239c1d569..dc1cded716c1 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1437,15 +1437,19 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { modem_info *info = (modem_info *) tty->driver_data;
+ mutex_lock(&modem_info_mutex); if (!old_termios) isdn_tty_change_speed(info); else { if (tty->termios.c_cflag == old_termios->c_cflag && tty->termios.c_ispeed == old_termios->c_ispeed && - tty->termios.c_ospeed == old_termios->c_ospeed) + tty->termios.c_ospeed == old_termios->c_ospeed) { + mutex_unlock(&modem_info_mutex); return; + } isdn_tty_change_speed(info); } + mutex_unlock(&modem_info_mutex); }
/*
From: Xiubo Li xiubli@redhat.com
[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ]
Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached.
This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue.
Signed-off-by: Xiubo Li xiubli@redhat.com Acked-by: Mike Christie mchristi@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_user.c | 88 +++++++++++++++++++++---------- 1 file changed, 61 insertions(+), 27 deletions(-)
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 9cd404acdb82..ac7620120491 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -148,7 +148,7 @@ struct tcmu_dev { size_t ring_size;
struct mutex cmdr_lock; - struct list_head cmdr_queue; + struct list_head qfull_queue;
uint32_t dbi_max; uint32_t dbi_thresh; @@ -159,6 +159,7 @@ struct tcmu_dev {
struct timer_list cmd_timer; unsigned int cmd_time_out; + struct list_head inflight_queue;
struct timer_list qfull_timer; int qfull_time_out; @@ -179,7 +180,7 @@ struct tcmu_dev { struct tcmu_cmd { struct se_cmd *se_cmd; struct tcmu_dev *tcmu_dev; - struct list_head cmdr_queue_entry; + struct list_head queue_entry;
uint16_t cmd_id;
@@ -192,6 +193,7 @@ struct tcmu_cmd { unsigned long deadline;
#define TCMU_CMD_BIT_EXPIRED 0 +#define TCMU_CMD_BIT_INFLIGHT 1 unsigned long flags; }; /* @@ -586,7 +588,7 @@ static struct tcmu_cmd *tcmu_alloc_cmd(struct se_cmd *se_cmd) if (!tcmu_cmd) return NULL;
- INIT_LIST_HEAD(&tcmu_cmd->cmdr_queue_entry); + INIT_LIST_HEAD(&tcmu_cmd->queue_entry); tcmu_cmd->se_cmd = se_cmd; tcmu_cmd->tcmu_dev = udev;
@@ -915,11 +917,13 @@ setup_timer: return 0;
tcmu_cmd->deadline = round_jiffies_up(jiffies + msecs_to_jiffies(tmo)); - mod_timer(timer, tcmu_cmd->deadline); + if (!timer_pending(timer)) + mod_timer(timer, tcmu_cmd->deadline); + return 0; }
-static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd) +static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd) { struct tcmu_dev *udev = tcmu_cmd->tcmu_dev; unsigned int tmo; @@ -942,7 +946,7 @@ static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd) if (ret) return ret;
- list_add_tail(&tcmu_cmd->cmdr_queue_entry, &udev->cmdr_queue); + list_add_tail(&tcmu_cmd->queue_entry, &udev->qfull_queue); pr_debug("adding cmd %u on dev %s to ring space wait queue\n", tcmu_cmd->cmd_id, udev->name); return 0; @@ -999,7 +1003,7 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err) base_command_size = tcmu_cmd_get_base_cmd_size(tcmu_cmd->dbi_cnt); command_size = tcmu_cmd_get_cmd_size(tcmu_cmd, base_command_size);
- if (!list_empty(&udev->cmdr_queue)) + if (!list_empty(&udev->qfull_queue)) goto queue;
mb = udev->mb_addr; @@ -1096,13 +1100,16 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err) UPDATE_HEAD(mb->cmd_head, command_size, udev->cmdr_size); tcmu_flush_dcache_range(mb, sizeof(*mb));
+ list_add_tail(&tcmu_cmd->queue_entry, &udev->inflight_queue); + set_bit(TCMU_CMD_BIT_INFLIGHT, &tcmu_cmd->flags); + /* TODO: only if FLUSH and FUA? */ uio_event_notify(&udev->uio_info);
return 0;
queue: - if (add_to_cmdr_queue(tcmu_cmd)) { + if (add_to_qfull_queue(tcmu_cmd)) { *scsi_err = TCM_OUT_OF_RESOURCES; return -1; } @@ -1145,6 +1152,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) goto out;
+ list_del_init(&cmd->queue_entry); + tcmu_cmd_reset_dbi_cur(cmd);
if (entry->hdr.uflags & TCMU_UFLAG_UNKNOWN_OP) { @@ -1194,9 +1203,29 @@ out: tcmu_free_cmd(cmd); }
+static void tcmu_set_next_deadline(struct list_head *queue, + struct timer_list *timer) +{ + struct tcmu_cmd *tcmu_cmd, *tmp_cmd; + unsigned long deadline = 0; + + list_for_each_entry_safe(tcmu_cmd, tmp_cmd, queue, queue_entry) { + if (!time_after(jiffies, tcmu_cmd->deadline)) { + deadline = tcmu_cmd->deadline; + break; + } + } + + if (deadline) + mod_timer(timer, deadline); + else + del_timer(timer); +} + static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) { struct tcmu_mailbox *mb; + struct tcmu_cmd *cmd; int handled = 0;
if (test_bit(TCMU_DEV_BIT_BROKEN, &udev->flags)) { @@ -1210,7 +1239,6 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) while (udev->cmdr_last_cleaned != READ_ONCE(mb->cmd_tail)) {
struct tcmu_cmd_entry *entry = (void *) mb + CMDR_OFF + udev->cmdr_last_cleaned; - struct tcmu_cmd *cmd;
tcmu_flush_dcache_range(entry, sizeof(*entry));
@@ -1243,7 +1271,7 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) /* no more pending commands */ del_timer(&udev->cmd_timer);
- if (list_empty(&udev->cmdr_queue)) { + if (list_empty(&udev->qfull_queue)) { /* * no more pending or waiting commands so try to * reclaim blocks if needed. @@ -1252,6 +1280,8 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) tcmu_global_max_blocks) schedule_delayed_work(&tcmu_unmap_work, 0); } + } else if (udev->cmd_time_out) { + tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer); }
return handled; @@ -1271,7 +1301,7 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data) if (!time_after(jiffies, cmd->deadline)) return 0;
- is_running = list_empty(&cmd->cmdr_queue_entry); + is_running = test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags); se_cmd = cmd->se_cmd;
if (is_running) { @@ -1288,12 +1318,11 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data) */ scsi_status = SAM_STAT_CHECK_CONDITION; } else { - list_del_init(&cmd->cmdr_queue_entry); - idr_remove(&udev->commands, id); tcmu_free_cmd(cmd); scsi_status = SAM_STAT_TASK_SET_FULL; } + list_del_init(&cmd->queue_entry);
pr_debug("Timing out cmd %u on dev %s that is %s.\n", id, udev->name, is_running ? "inflight" : "queued"); @@ -1372,7 +1401,8 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
INIT_LIST_HEAD(&udev->node); INIT_LIST_HEAD(&udev->timedout_entry); - INIT_LIST_HEAD(&udev->cmdr_queue); + INIT_LIST_HEAD(&udev->qfull_queue); + INIT_LIST_HEAD(&udev->inflight_queue); idr_init(&udev->commands);
timer_setup(&udev->qfull_timer, tcmu_qfull_timedout, 0); @@ -1383,7 +1413,7 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name) return &udev->se_dev; }
-static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail) +static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) { struct tcmu_cmd *tcmu_cmd, *tmp_cmd; LIST_HEAD(cmds); @@ -1391,15 +1421,15 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail) sense_reason_t scsi_ret; int ret;
- if (list_empty(&udev->cmdr_queue)) + if (list_empty(&udev->qfull_queue)) return true;
pr_debug("running %s's cmdr queue forcefail %d\n", udev->name, fail);
- list_splice_init(&udev->cmdr_queue, &cmds); + list_splice_init(&udev->qfull_queue, &cmds);
- list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, cmdr_queue_entry) { - list_del_init(&tcmu_cmd->cmdr_queue_entry); + list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, queue_entry) { + list_del_init(&tcmu_cmd->queue_entry);
pr_debug("removing cmd %u on dev %s from queue\n", tcmu_cmd->cmd_id, udev->name); @@ -1437,14 +1467,13 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail) * cmd was requeued, so just put all cmds back in * the queue */ - list_splice_tail(&cmds, &udev->cmdr_queue); + list_splice_tail(&cmds, &udev->qfull_queue); drained = false; - goto done; + break; } } - if (list_empty(&udev->cmdr_queue)) - del_timer(&udev->qfull_timer); -done: + + tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer); return drained; }
@@ -1454,7 +1483,7 @@ static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on)
mutex_lock(&udev->cmdr_lock); tcmu_handle_completions(udev); - run_cmdr_queue(udev, false); + run_qfull_queue(udev, false); mutex_unlock(&udev->cmdr_lock);
return 0; @@ -1982,7 +2011,7 @@ static void tcmu_block_dev(struct tcmu_dev *udev) /* complete IO that has executed successfully */ tcmu_handle_completions(udev); /* fail IO waiting to be queued */ - run_cmdr_queue(udev, true); + run_qfull_queue(udev, true);
unlock: mutex_unlock(&udev->cmdr_lock); @@ -1997,7 +2026,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level) mutex_lock(&udev->cmdr_lock);
idr_for_each_entry(&udev->commands, cmd, i) { - if (!list_empty(&cmd->cmdr_queue_entry)) + if (!test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags)) continue;
pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n", @@ -2006,6 +2035,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
idr_remove(&udev->commands, i); if (!test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) { + list_del_init(&cmd->queue_entry); if (err_level == 1) { /* * Userspace was not able to start the @@ -2666,6 +2696,10 @@ static void check_timedout_devices(void)
mutex_lock(&udev->cmdr_lock); idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL); + + tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer); + tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer); + mutex_unlock(&udev->cmdr_lock);
spin_lock_bh(&timed_out_udevs_lock);
From: Stanley Chu stanley.chu@mediatek.com
[ Upstream commit ce9e7bce43526626f7cffe2e657953997870197e ]
hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume.
According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned.
Simply fix this flag to correct host status logs.
Signed-off-by: Stanley Chu stanley.chu@mediatek.com Reviewed-by: Avri Altman avri.altman@wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 1cb35ab8a4ec..2772ff4357fc 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -7924,6 +7924,8 @@ out: trace_ufshcd_system_resume(dev_name(hba->dev), ret, ktime_to_us(ktime_sub(ktime_get(), start)), hba->curr_dev_pwr_mode, hba->uic_link_state); + if (!ret) + hba->is_sys_suspended = false; return ret; } EXPORT_SYMBOL(ufshcd_system_resume);
From: Manish Rangankar mrangankar@marvell.com
[ Upstream commit 34a2ce887668db9dda4b56e6f155c49ac13f3e54 ]
When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets.
Signed-off-by: Manish Rangankar mrangankar@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedi/qedi_iscsi.c | 3 +++ drivers/scsi/qedi/qedi_iscsi.h | 1 + 2 files changed, 4 insertions(+)
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 2f0a4f2c5ff8..d4821b9dea45 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -954,6 +954,7 @@ static int qedi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
qedi_ep = ep->dd_data; if (qedi_ep->state == EP_STATE_IDLE || + qedi_ep->state == EP_STATE_OFLDCONN_NONE || qedi_ep->state == EP_STATE_OFLDCONN_FAILED) return -1;
@@ -1036,6 +1037,7 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
switch (qedi_ep->state) { case EP_STATE_OFLDCONN_START: + case EP_STATE_OFLDCONN_NONE: goto ep_release_conn; case EP_STATE_OFLDCONN_FAILED: break; @@ -1226,6 +1228,7 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)
if (!is_valid_ether_addr(&path_data->mac_addr[0])) { QEDI_NOTICE(&qedi->dbg_ctx, "dst mac NOT VALID\n"); + qedi_ep->state = EP_STATE_OFLDCONN_NONE; ret = -EIO; goto set_path_exit; } diff --git a/drivers/scsi/qedi/qedi_iscsi.h b/drivers/scsi/qedi/qedi_iscsi.h index 11260776212f..892d70d54553 100644 --- a/drivers/scsi/qedi/qedi_iscsi.h +++ b/drivers/scsi/qedi/qedi_iscsi.h @@ -59,6 +59,7 @@ enum { EP_STATE_OFLDCONN_FAILED = 0x2000, EP_STATE_CONNECT_FAILED = 0x4000, EP_STATE_DISCONN_TIMEDOUT = 0x8000, + EP_STATE_OFLDCONN_NONE = 0x10000, };
struct qedi_conn;
From: Avri Altman avri.altman@wdc.com
[ Upstream commit 9be9db9f78f52ef03ee90063730cb9d730e7032b ]
Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0.
[mkp: typo]
Fixes: c720c091222e (scsi: ufs: sysfs: geometry descriptor) Signed-off-by: Avri Altman avri.altman@wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index 58087d3916d0..5417ce09b105 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -195,7 +195,7 @@ enum ufs_desc_def_size { QUERY_DESC_CONFIGURATION_DEF_SIZE = 0x90, QUERY_DESC_UNIT_DEF_SIZE = 0x23, QUERY_DESC_INTERCONNECT_DEF_SIZE = 0x06, - QUERY_DESC_GEOMETRY_DEF_SIZE = 0x44, + QUERY_DESC_GEOMETRY_DEF_SIZE = 0x48, QUERY_DESC_POWER_DEF_SIZE = 0x62, QUERY_DESC_HEALTH_DEF_SIZE = 0x25, };
From: Thomas Bogendoerfer tbogendoerfer@suse.de
[ Upstream commit 4a01ab60f55041b1ccc760e43258a5b3aeeca1bc ]
After Commit 54aed4dd3526 ("MIPS: IP27: use dma_direct_ops") qla1280 driver failed on SGI IP27 machines with
qla1280: QLA1040 found on PCI bus 0, dev 0 qla1280 0000:00:00.0: enabling device (0006 -> 0007) qla1280: Failed to get request memory qla1280: probe of 0000:00:00.0 failed with error -12
Reason is that SGI IP27 always generates 64bit DMA addresses and has no fallback mode for 32bit DMA addresses implemented. QLA1280 supports 64bit addressing for all DMA accesses so setting coherent mask to 64bit fixes the issue.
Signed-off-by: Thomas Bogendoerfer tbogendoerfer@suse.de Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla1280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 15a50cc7e4b3..c8589926014d 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -4259,7 +4259,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->devnum = devnum; /* specifies microcode load address */
#ifdef QLA_64BIT_PTR - if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) { + if (dma_set_mask_and_coherent(&ha->pdev->dev, DMA_BIT_MASK(64))) { if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no);
From: Varun Prakash varun@chelsio.com
[ Upstream commit 9e8f1c79831424d30c0e3df068be7f4a244157c9 ]
In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion().
Signed-off-by: Varun Prakash varun@chelsio.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 9 ++++----- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 28 ++++++++++++++++++++-------- drivers/scsi/cxgbi/libcxgbi.c | 7 ++++--- drivers/scsi/cxgbi/libcxgbi.h | 5 +++-- 4 files changed, 31 insertions(+), 18 deletions(-)
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c index bf07735275a4..0fc382cb977b 100644 --- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c @@ -1144,7 +1144,7 @@ static void ddp_clear_map(struct cxgbi_device *cdev, struct cxgbi_ppm *ppm, }
static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, - unsigned int tid, int pg_idx, bool reply) + unsigned int tid, int pg_idx) { struct sk_buff *skb = alloc_wr(sizeof(struct cpl_set_tcb_field), 0, GFP_KERNEL); @@ -1160,7 +1160,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, req = (struct cpl_set_tcb_field *)skb->head; req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); - req->reply = V_NO_REPLY(reply ? 0 : 1); + req->reply = V_NO_REPLY(1); req->cpu_idx = 0; req->word = htons(31); req->mask = cpu_to_be64(0xF0000000); @@ -1177,11 +1177,10 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, * @tid: connection id * @hcrc: header digest enabled * @dcrc: data digest enabled - * @reply: request reply from h/w * set up the iscsi digest settings for a connection identified by tid */ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, - int hcrc, int dcrc, int reply) + int hcrc, int dcrc) { struct sk_buff *skb = alloc_wr(sizeof(struct cpl_set_tcb_field), 0, GFP_KERNEL); @@ -1197,7 +1196,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, req = (struct cpl_set_tcb_field *)skb->head; req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); - req->reply = V_NO_REPLY(reply ? 0 : 1); + req->reply = V_NO_REPLY(1); req->cpu_idx = 0; req->word = htons(31); req->mask = cpu_to_be64(0x0F000000); diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c index 064ef5735182..bd6cc014cab0 100644 --- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c @@ -1548,16 +1548,22 @@ static void do_set_tcb_rpl(struct cxgbi_device *cdev, struct sk_buff *skb) struct cxgbi_sock *csk;
csk = lookup_tid(t, tid); - if (!csk) + if (!csk) { pr_err("can't find conn. for tid %u.\n", tid); + return; + }
log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, "csk 0x%p,%u,%lx,%u, status 0x%x.\n", csk, csk->state, csk->flags, csk->tid, rpl->status);
- if (rpl->status != CPL_ERR_NONE) + if (rpl->status != CPL_ERR_NONE) { pr_err("csk 0x%p,%u, SET_TCB_RPL status %u.\n", csk, tid, rpl->status); + csk->err = -EINVAL; + } + + complete(&csk->cmpl);
__kfree_skb(skb); } @@ -1984,7 +1990,7 @@ static int ddp_set_map(struct cxgbi_ppm *ppm, struct cxgbi_sock *csk, }
static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid, - int pg_idx, bool reply) + int pg_idx) { struct sk_buff *skb; struct cpl_set_tcb_field *req; @@ -2000,7 +2006,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid, req = (struct cpl_set_tcb_field *)skb->head; INIT_TP_WR(req, csk->tid); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, csk->tid)); - req->reply_ctrl = htons(NO_REPLY_V(reply) | QUEUENO_V(csk->rss_qid)); + req->reply_ctrl = htons(NO_REPLY_V(0) | QUEUENO_V(csk->rss_qid)); req->word_cookie = htons(0); req->mask = cpu_to_be64(0x3 << 8); req->val = cpu_to_be64(pg_idx << 8); @@ -2009,12 +2015,15 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid, log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, "csk 0x%p, tid 0x%x, pg_idx %u.\n", csk, csk->tid, pg_idx);
+ reinit_completion(&csk->cmpl); cxgb4_ofld_send(csk->cdev->ports[csk->port_id], skb); - return 0; + wait_for_completion(&csk->cmpl); + + return csk->err; }
static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, - int hcrc, int dcrc, int reply) + int hcrc, int dcrc) { struct sk_buff *skb; struct cpl_set_tcb_field *req; @@ -2032,7 +2041,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, req = (struct cpl_set_tcb_field *)skb->head; INIT_TP_WR(req, tid); OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); - req->reply_ctrl = htons(NO_REPLY_V(reply) | QUEUENO_V(csk->rss_qid)); + req->reply_ctrl = htons(NO_REPLY_V(0) | QUEUENO_V(csk->rss_qid)); req->word_cookie = htons(0); req->mask = cpu_to_be64(0x3 << 4); req->val = cpu_to_be64(((hcrc ? ULP_CRC_HEADER : 0) | @@ -2042,8 +2051,11 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, "csk 0x%p, tid 0x%x, crc %d,%d.\n", csk, csk->tid, hcrc, dcrc);
+ reinit_completion(&csk->cmpl); cxgb4_ofld_send(csk->cdev->ports[csk->port_id], skb); - return 0; + wait_for_completion(&csk->cmpl); + + return csk->err; }
static struct cxgbi_ppm *cdev2ppm(struct cxgbi_device *cdev) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index 75f876409fb9..245742557c03 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -573,6 +573,7 @@ static struct cxgbi_sock *cxgbi_sock_create(struct cxgbi_device *cdev) skb_queue_head_init(&csk->receive_queue); skb_queue_head_init(&csk->write_queue); timer_setup(&csk->retry_timer, NULL, 0); + init_completion(&csk->cmpl); rwlock_init(&csk->callback_lock); csk->cdev = cdev; csk->flags = 0; @@ -2251,14 +2252,14 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn, if (!err && conn->hdrdgst_en) err = csk->cdev->csk_ddp_setup_digest(csk, csk->tid, conn->hdrdgst_en, - conn->datadgst_en, 0); + conn->datadgst_en); break; case ISCSI_PARAM_DATADGST_EN: err = iscsi_set_param(cls_conn, param, buf, buflen); if (!err && conn->datadgst_en) err = csk->cdev->csk_ddp_setup_digest(csk, csk->tid, conn->hdrdgst_en, - conn->datadgst_en, 0); + conn->datadgst_en); break; case ISCSI_PARAM_MAX_R2T: return iscsi_tcp_set_max_r2t(conn, buf); @@ -2384,7 +2385,7 @@ int cxgbi_bind_conn(struct iscsi_cls_session *cls_session,
ppm = csk->cdev->cdev2ppm(csk->cdev); err = csk->cdev->csk_ddp_setup_pgidx(csk, csk->tid, - ppm->tformat.pgsz_idx_dflt, 0); + ppm->tformat.pgsz_idx_dflt); if (err < 0) return err;
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h index 5d5d8b50d842..1917ff57651d 100644 --- a/drivers/scsi/cxgbi/libcxgbi.h +++ b/drivers/scsi/cxgbi/libcxgbi.h @@ -149,6 +149,7 @@ struct cxgbi_sock { struct sk_buff_head receive_queue; struct sk_buff_head write_queue; struct timer_list retry_timer; + struct completion cmpl; int err; rwlock_t callback_lock; void *user_data; @@ -490,9 +491,9 @@ struct cxgbi_device { struct cxgbi_ppm *, struct cxgbi_task_tag_info *); int (*csk_ddp_setup_digest)(struct cxgbi_sock *, - unsigned int, int, int, int); + unsigned int, int, int); int (*csk_ddp_setup_pgidx)(struct cxgbi_sock *, - unsigned int, int, bool); + unsigned int, int);
void (*csk_release_offload_resources)(struct cxgbi_sock *); int (*csk_rx_pdu_ready)(struct cxgbi_sock *, struct sk_buff *);
From: Henry Yen henry.yen@mediatek.com
[ Upstream commit 2314e879747e82896f51cce4488f6a00f3e1af7b ]
This patch uses nfct_help() to detect whether an established connection needs conntrack helper instead of using test_bit(IPS_HELPER_BIT, &ct->status).
The reason is that IPS_HELPER_BIT is only set when using explicit CT target.
However, in the case that a device enables conntrack helper via command "echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of IPS_HELPER_BIT will not present any change, and consequently it loses the checking ability in the context.
Signed-off-by: Henry Yen henry.yen@mediatek.com Reviewed-by: Ryder Lee ryder.lee@mediatek.com Tested-by: John Crispin john@phrozen.org Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_flow_offload.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c index 188c6bbf4e16..6e6b9adf7d38 100644 --- a/net/netfilter/nft_flow_offload.c +++ b/net/netfilter/nft_flow_offload.c @@ -12,6 +12,7 @@ #include <net/netfilter/nf_conntrack_core.h> #include <linux/netfilter/nf_conntrack_common.h> #include <net/netfilter/nf_flow_table.h> +#include <net/netfilter/nf_conntrack_helper.h>
struct nft_flow_offload { struct nft_flowtable *flowtable; @@ -66,6 +67,7 @@ static void nft_flow_offload_eval(const struct nft_expr *expr, { struct nft_flow_offload *priv = nft_expr_priv(expr); struct nf_flowtable *flowtable = &priv->flowtable->data; + const struct nf_conn_help *help; enum ip_conntrack_info ctinfo; struct nf_flow_route route; struct flow_offload *flow; @@ -88,7 +90,8 @@ static void nft_flow_offload_eval(const struct nft_expr *expr, goto out; }
- if (test_bit(IPS_HELPER_BIT, &ct->status)) + help = nfct_help(ct); + if (help) goto out;
if (ctinfo == IP_CT_NEW ||
From: Talons Lee xin.li@citrix.com
[ Upstream commit 5268c8f39e0efef81af2aaed160272d9eb507beb ]
Commit e657fcc clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit.
Signed-off-by: Talons Lee xin.li@citrix.com Reviewed-by: Juergen Gross jgross@suse.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/xen/enlighten_pv.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 2f6787fc7106..c54a493e139a 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -898,10 +898,7 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err) val = native_read_msr_safe(msr, err); switch (msr) { case MSR_IA32_APICBASE: -#ifdef CONFIG_X86_X2APIC - if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31)))) -#endif - val &= ~X2APIC_ENABLE; + val &= ~X2APIC_ENABLE; break; } return val;
From: Julia Lawall Julia.Lawall@lip6.fr
[ Upstream commit f672b93e4a0a4947d2e1103ed8780e01e13eadb6 ]
Add an of_node_put when the result of of_graph_get_remote_port_parent is not available.
An of_node_put is also needed when meson_probe_remote completes. This was present at the recursive call, but not in the call from meson_drv_probe.
The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr):
// <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl>
Signed-off-by: Julia Lawall Julia.Lawall@lip6.fr Acked-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://patchwork.freedesktop.org/patch/msgid/1547372691-28324-4-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/meson/meson_drv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index bf5f294f172f..611ac340fb28 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -368,8 +368,10 @@ static int meson_probe_remote(struct platform_device *pdev, remote_node = of_graph_get_remote_port_parent(ep); if (!remote_node || remote_node == parent || /* Ignore parent endpoint */ - !of_device_is_available(remote_node)) + !of_device_is_available(remote_node)) { + of_node_put(remote_node); continue; + }
count += meson_probe_remote(pdev, match, remote, remote_node);
@@ -388,10 +390,13 @@ static int meson_drv_probe(struct platform_device *pdev)
for_each_endpoint_of_node(np, ep) { remote = of_graph_get_remote_port_parent(ep); - if (!remote || !of_device_is_available(remote)) + if (!remote || !of_device_is_available(remote)) { + of_node_put(remote); continue; + }
count += meson_probe_remote(pdev, &match, np, remote); + of_node_put(remote); }
if (count && !match)
From: Felix Kuehling Felix.Kuehling@amd.com
[ Upstream commit bbdf514fe5648566b0754476cbcb92ac3422dde2 ]
dGPUs need their own topology devices. Don't assign them to APU topology devices with CPU cores.
Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66 Signed-off-by: Felix Kuehling Felix.Kuehling@amd.com Tested-by: Elias Konstantinidis ekondis@gmail.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index e3843c5929ed..fffece5e42c5 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -1074,8 +1074,6 @@ static uint32_t kfd_generate_gpu_id(struct kfd_dev *gpu) * the GPU device is not already present in the topology device * list then return NULL. This means a new topology device has to * be created for this GPU. - * TODO: Rather than assiging @gpu to first topology device withtout - * gpu attached, it will better to have more stringent check. */ static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu) { @@ -1083,12 +1081,20 @@ static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu) struct kfd_topology_device *out_dev = NULL;
down_write(&topology_lock); - list_for_each_entry(dev, &topology_device_list, list) + list_for_each_entry(dev, &topology_device_list, list) { + /* Discrete GPUs need their own topology device list + * entries. Don't assign them to CPU/APU nodes. + */ + if (!gpu->device_info->needs_iommu_device && + dev->node_props.cpu_cores_count) + continue; + if (!dev->gpu && (dev->node_props.simd_count > 0)) { dev->gpu = gpu; out_dev = dev; break; } + } up_write(&topology_lock); return out_dev; }
From: Charlene Liu charlene.liu@amd.com
[ Upstream commit 20300db4aec5ba5edf6f0ad6f7111a51fbea7e10 ]
[Why] PPLIB not receive the PME when unplug.
Signed-off-by: Charlene Liu charlene.liu@amd.com Reviewed-by: Chris Park Chris.Park@amd.com Acked-by: Leo Li sunpeng.li@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index a6bcb90e8419..0ae41693cd9f 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1000,7 +1000,7 @@ void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx)
pipe_ctx->stream_res.audio->funcs->az_enable(pipe_ctx->stream_res.audio);
- if (num_audio == 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL) + if (num_audio >= 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL) /*this is the first audio. apply the PME w/a in order to wake AZ from D3*/ pp_smu->set_pme_wa_enable(&pp_smu->pp_smu); /* un-mute audio */ @@ -1017,6 +1017,8 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option) pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control( pipe_ctx->stream_res.stream_enc, true); if (pipe_ctx->stream_res.audio) { + struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu; + if (option != KEEP_ACQUIRED_RESOURCE || !dc->debug.az_endpoint_mute_only) { /*only disalbe az_endpoint if power down or free*/ @@ -1036,6 +1038,9 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option) update_audio_usage(&dc->current_state->res_ctx, dc->res_pool, pipe_ctx->stream_res.audio, false); pipe_ctx->stream_res.audio = NULL; } + if (pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL) + /*this is the first audio. apply the PME w/a in order to wake AZ from D3*/ + pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
/* TODO: notify audio driver for if audio modes list changed * add audio mode list change flag */
From: Pavel Tikhomirov ptikhomirov@virtuozzo.com
[ Upstream commit 74ad7419489ddade8044e3c9ab064ad656520306 ]
We've failed to copy and process vhost_iotlb_msg so let userspace at least know about it. For instance before these patch the code below runs without any error:
int main() { struct vhost_msg msg; struct iovec iov; int fd;
fd = open("/dev/vhost-net", O_RDWR); if (fd == -1) { perror("open"); return 1; }
iov.iov_base = &msg; iov.iov_len = sizeof(msg)-4;
if (writev(fd, &iov,1) == -1) { perror("writev"); return 1; }
return 0; }
Signed-off-by: Pavel Tikhomirov ptikhomirov@virtuozzo.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/vhost.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index cf82e7266397..7a07b0e86644 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1035,8 +1035,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev, int type, ret;
ret = copy_from_iter(&type, sizeof(type), from); - if (ret != sizeof(type)) + if (ret != sizeof(type)) { + ret = -EINVAL; goto done; + }
switch (type) { case VHOST_IOTLB_MSG: @@ -1055,8 +1057,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
iov_iter_advance(from, offset); ret = copy_from_iter(&msg, sizeof(msg), from); - if (ret != sizeof(msg)) + if (ret != sizeof(msg)) { + ret = -EINVAL; goto done; + } if (vhost_process_iotlb_msg(dev, &msg)) { ret = -EFAULT; goto done;
From: Bijan Mottahedeh bijan.mottahedeh@oracle.com
[ Upstream commit 8e5dadfe76cf2862ebf3e4f22adef29982df7766 ]
Uses copy_to_iter() instead of __copy_to_user() in order to ensure we support arbitrary layouts and an input buffer split across iov entries.
Fixes: 0d02dbd68c47b ("vhost/scsi: Respond to control queue operations") Signed-off-by: Bijan Mottahedeh bijan.mottahedeh@oracle.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/scsi.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 73a4adeab096..11bd8b6422eb 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -1132,16 +1132,18 @@ vhost_scsi_send_tmf_reject(struct vhost_scsi *vs, struct vhost_virtqueue *vq, struct vhost_scsi_ctx *vc) { - struct virtio_scsi_ctrl_tmf_resp __user *resp; struct virtio_scsi_ctrl_tmf_resp rsp; + struct iov_iter iov_iter; int ret;
pr_debug("%s\n", __func__); memset(&rsp, 0, sizeof(rsp)); rsp.response = VIRTIO_SCSI_S_FUNCTION_REJECTED; - resp = vq->iov[vc->out].iov_base; - ret = __copy_to_user(resp, &rsp, sizeof(rsp)); - if (!ret) + + iov_iter_init(&iov_iter, READ, &vq->iov[vc->out], vc->in, sizeof(rsp)); + + ret = copy_to_iter(&rsp, sizeof(rsp), &iov_iter); + if (likely(ret == sizeof(rsp))) vhost_add_used_and_signal(&vs->dev, vq, vc->head, 0); else pr_err("Faulted on virtio_scsi_ctrl_tmf_resp\n"); @@ -1152,16 +1154,18 @@ vhost_scsi_send_an_resp(struct vhost_scsi *vs, struct vhost_virtqueue *vq, struct vhost_scsi_ctx *vc) { - struct virtio_scsi_ctrl_an_resp __user *resp; struct virtio_scsi_ctrl_an_resp rsp; + struct iov_iter iov_iter; int ret;
pr_debug("%s\n", __func__); memset(&rsp, 0, sizeof(rsp)); /* event_actual = 0 */ rsp.response = VIRTIO_SCSI_S_OK; - resp = vq->iov[vc->out].iov_base; - ret = __copy_to_user(resp, &rsp, sizeof(rsp)); - if (!ret) + + iov_iter_init(&iov_iter, READ, &vq->iov[vc->out], vc->in, sizeof(rsp)); + + ret = copy_to_iter(&rsp, sizeof(rsp), &iov_iter); + if (likely(ret == sizeof(rsp))) vhost_add_used_and_signal(&vs->dev, vq, vc->head, 0); else pr_err("Faulted on virtio_scsi_ctrl_an_resp\n");
From: Krzysztof Kazimierczak krzysztof.kazimierczak@intel.com
[ Upstream commit cc5b5d3565048ae57d14e5674a5fb085b2ab0193 ]
In the xdp_umem_assign_dev() path, the xsk code does not check if a queue for which umem is to be created exists. It leads to a situation where umem is not assigned to any Tx/Rx queue of a netdevice, without notifying the stack about an error. This affects both XDP_SKB and XDP_DRV modes - in case of XDP_DRV_ZC, queue index is checked by the driver.
This patch fixes xsk code, so that in both XDP_SKB and XDP_DRV mode of AF_XDP, an error is returned when requested queue index exceedes an existing maximum.
Fixes: c9b47cc1fabca ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Reported-by: Jakub Spizewski jakub.spizewski@intel.com Signed-off-by: Krzysztof Kazimierczak krzysztof.kazimierczak@intel.com Acked-by: Björn Töpel bjorn.topel@intel.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/xdp/xdp_umem.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/net/xdp/xdp_umem.c b/net/xdp/xdp_umem.c index a264cf2accd0..d4de871e7d4d 100644 --- a/net/xdp/xdp_umem.c +++ b/net/xdp/xdp_umem.c @@ -41,13 +41,20 @@ void xdp_del_sk_umem(struct xdp_umem *umem, struct xdp_sock *xs) * not know if the device has more tx queues than rx, or the opposite. * This might also change during run time. */ -static void xdp_reg_umem_at_qid(struct net_device *dev, struct xdp_umem *umem, - u16 queue_id) +static int xdp_reg_umem_at_qid(struct net_device *dev, struct xdp_umem *umem, + u16 queue_id) { + if (queue_id >= max_t(unsigned int, + dev->real_num_rx_queues, + dev->real_num_tx_queues)) + return -EINVAL; + if (queue_id < dev->real_num_rx_queues) dev->_rx[queue_id].umem = umem; if (queue_id < dev->real_num_tx_queues) dev->_tx[queue_id].umem = umem; + + return 0; }
struct xdp_umem *xdp_get_umem_from_qid(struct net_device *dev, @@ -88,7 +95,10 @@ int xdp_umem_assign_dev(struct xdp_umem *umem, struct net_device *dev, goto out_rtnl_unlock; }
- xdp_reg_umem_at_qid(dev, umem, queue_id); + err = xdp_reg_umem_at_qid(dev, umem, queue_id); + if (err) + goto out_rtnl_unlock; + umem->dev = dev; umem->queue_id = queue_id; if (force_copy)
From: Stanislav Fomichev sdf@google.com
[ Upstream commit 1be72f29bfb98be27a95309f18b4ab5249967b59 ]
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh However, we install only with_addr.sh.
Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets installed as well.
Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x
Fixes: ef4ab8447aa26 ("selftests: bpf: install script with_addr.sh") Signed-off-by: Stanislav Fomichev sdf@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/Makefile | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 74ece4f9fcce..d5e992f7c7dd 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -54,6 +54,7 @@ TEST_PROGS := test_kmod.sh \ test_xdp_vlan.sh
TEST_PROGS_EXTENDED := with_addr.sh \ + with_tunnels.sh \ tcp_client.py \ tcp_server.py
From: Yonghong Song yhs@fb.com
[ Upstream commit 6bf3bbe1f4d4cf405e3c2bf07bbdff56d3223ec8 ]
x86 compilation has required asm goto support since 4.17. Since clang does not support asm goto, at 4.17, Commit b1ae32dbab50 ("x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation") worked around the issue by permitting an alternative implementation without asm goto for clang.
At 5.0, more asm goto usages appeared. [yhs@148 x86]$ egrep -r asm_volatile_goto include/asm/cpufeature.h: asm_volatile_goto("1: jmp 6f\n" include/asm/jump_label.h: asm_volatile_goto("1:" include/asm/jump_label.h: asm_volatile_goto("1:" include/asm/rmwcc.h: asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \ include/asm/uaccess.h: asm_volatile_goto("\n" \ include/asm/uaccess.h: asm_volatile_goto("\n" \ [yhs@148 x86]$
Compiling samples/bpf directories, most bpf programs failed compilation with error messages like: In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2: In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6: In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15: In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5: In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5: In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9: In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72: /home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl", ^ /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc' __GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc, \ ^ /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc' asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \ ^ /home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto' #define asm_volatile_goto(x...) asm goto(x)
Most implementation does not even provide an alternative implementation. And it is also not practical to make changes for each call site.
This patch workarounded the asm goto issue by redefining the macro like below: #define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto")
If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes.
With this patch, all bpf programs under samples/bpf can pass compilation.
Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as they do not access kernel internal headers.
Fixes: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Fixes: 18fe58229d80 ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition") Acked-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Yonghong Song yhs@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- samples/bpf/Makefile | 1 + samples/bpf/asm_goto_workaround.h | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) create mode 100644 samples/bpf/asm_goto_workaround.h
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index be0a961450bc..f5ce993c78e4 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -273,6 +273,7 @@ $(obj)/%.o: $(src)/%.c -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -Wno-unknown-warning-option $(CLANG_ARCH_ARGS) \ + -I$(srctree)/samples/bpf/ -include asm_goto_workaround.h \ -O2 -emit-llvm -c $< -o -| $(LLC) -march=bpf $(LLC_FLAGS) -filetype=obj -o $@ ifeq ($(DWARF2BTF),y) $(BTF_PAHOLE) -J $@ diff --git a/samples/bpf/asm_goto_workaround.h b/samples/bpf/asm_goto_workaround.h new file mode 100644 index 000000000000..5cd7c1d1a5d5 --- /dev/null +++ b/samples/bpf/asm_goto_workaround.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019 Facebook */ +#ifndef __ASM_GOTO_WORKAROUND_H +#define __ASM_GOTO_WORKAROUND_H + +/* this will bring in asm_volatile_goto macro definition + * if enabled by compiler and config options. + */ +#include <linux/types.h> + +#ifdef asm_volatile_goto +#undef asm_volatile_goto +#define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto") +#endif + +#endif
From: Trond Myklebust trondmy@gmail.com
[ Upstream commit e66721f0436396f779291a29616858b76bfd9415 ]
When we resend a request, ensure that the 'rq_bytes_sent' is reset to zero.
Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/clnt.c | 1 - net/sunrpc/xprt.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 24cbddc44c88..2189fbc4c570 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1738,7 +1738,6 @@ rpc_xdr_encode(struct rpc_task *task) xdr_buf_init(&req->rq_rcv_buf, req->rq_rbuffer, req->rq_rcvsize); - req->rq_bytes_sent = 0;
p = rpc_encode_header(task); if (p == NULL) { diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 943f08be7c38..f1ec2110efeb 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -1151,6 +1151,7 @@ xprt_request_enqueue_transmit(struct rpc_task *task) struct rpc_xprt *xprt = req->rq_xprt;
if (xprt_request_need_enqueue_transmit(task, req)) { + req->rq_bytes_sent = 0; spin_lock(&xprt->queue_lock); /* * Requests that carry congestion control credits are added
From: Trond Myklebust trondmy@gmail.com
[ Upstream commit 97b78ae96ba76f4ca2d8f5afee6a2e567ccb8f45 ]
According to RFC2203, the RPCSEC_GSS sequence numbers are bounded to an upper limit of MAXSEQ = 0x80000000. Ensure that we handle that correctly.
Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/auth_gss/auth_gss.c | 12 +++++++++--- net/sunrpc/clnt.c | 19 ++++++++++++------- 2 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index ba765473d1f0..efeee5586b2a 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1563,8 +1563,10 @@ gss_marshal(struct rpc_task *task, __be32 *p) cred_len = p++;
spin_lock(&ctx->gc_seq_lock); - req->rq_seqno = ctx->gc_seq++; + req->rq_seqno = (ctx->gc_seq < MAXSEQ) ? ctx->gc_seq++ : MAXSEQ; spin_unlock(&ctx->gc_seq_lock); + if (req->rq_seqno == MAXSEQ) + goto out_expired;
*p++ = htonl((u32) RPC_GSS_VERSION); *p++ = htonl((u32) ctx->gc_proc); @@ -1586,14 +1588,18 @@ gss_marshal(struct rpc_task *task, __be32 *p) mic.data = (u8 *)(p + 1); maj_stat = gss_get_mic(ctx->gc_gss_ctx, &verf_buf, &mic); if (maj_stat == GSS_S_CONTEXT_EXPIRED) { - clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags); + goto out_expired; } else if (maj_stat != 0) { - printk("gss_marshal: gss_get_mic FAILED (%d)\n", maj_stat); + pr_warn("gss_marshal: gss_get_mic FAILED (%d)\n", maj_stat); + task->tk_status = -EIO; goto out_put_ctx; } p = xdr_encode_opaque(p, NULL, mic.len); gss_put_ctx(ctx); return p; +out_expired: + clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags); + task->tk_status = -EKEYEXPIRED; out_put_ctx: gss_put_ctx(ctx); return NULL; diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 2189fbc4c570..1ee04e0ec4bc 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1740,11 +1740,8 @@ rpc_xdr_encode(struct rpc_task *task) req->rq_rcvsize);
p = rpc_encode_header(task); - if (p == NULL) { - printk(KERN_INFO "RPC: couldn't encode RPC header, exit EIO\n"); - rpc_exit(task, -EIO); + if (p == NULL) return; - }
encode = task->tk_msg.rpc_proc->p_encode; if (encode == NULL) @@ -1769,10 +1766,17 @@ call_encode(struct rpc_task *task) /* Did the encode result in an error condition? */ if (task->tk_status != 0) { /* Was the error nonfatal? */ - if (task->tk_status == -EAGAIN || task->tk_status == -ENOMEM) + switch (task->tk_status) { + case -EAGAIN: + case -ENOMEM: rpc_delay(task, HZ >> 4); - else + break; + case -EKEYEXPIRED: + task->tk_action = call_refresh; + break; + default: rpc_exit(task, task->tk_status); + } return; }
@@ -2334,7 +2338,8 @@ rpc_encode_header(struct rpc_task *task) *p++ = htonl(clnt->cl_vers); /* program version */ *p++ = htonl(task->tk_msg.rpc_proc->p_proc); /* procedure */ p = rpcauth_marshcred(task, p); - req->rq_slen = xdr_adjust_iovec(&req->rq_svec[0], p); + if (p) + req->rq_slen = xdr_adjust_iovec(&req->rq_svec[0], p); return p; }
From: Julia Lawall Julia.Lawall@lip6.fr
[ Upstream commit 4bb0e6d7258213d4893c2c876712fbba40e712fe ]
The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put.
Remote and port also have augmented reference counts, so drop them on each iteration and at the end of the function, respectively. Remote is only used for the address it contains, not for the contents of that address, so the reference count can be dropped immediately.
The semantic patch that fixes the first part of this problem is as follows (http://coccinelle.lip6.fr):
// <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@
for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl>
Signed-off-by: Julia Lawall Julia.Lawall@lip6.fr Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-5-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index bf49c55b0f2c..9f27d5464804 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -704,17 +704,18 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv, remote = of_graph_get_remote_port_parent(ep); if (!remote) continue; + of_node_put(remote);
/* does this node match any registered engines? */ list_for_each_entry(frontend, &drv->frontend_list, list) { if (remote == frontend->node) { - of_node_put(remote); of_node_put(port); + of_node_put(ep); return frontend; } } } - + of_node_put(port); return ERR_PTR(-EINVAL); }
From: Wen Yang wen.yang99@zte.com.cn
[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]
static checker warning: drivers/xen/pvcalls-front.c:373 alloc_active_ring() error: we previously assumed 'map->active.ring' could be null (see line 357)
drivers/xen/pvcalls-front.c 351 static int alloc_active_ring(struct sock_mapping *map) 352 { 353 void *bytes; 354 355 map->active.ring = (struct pvcalls_data_intf *) 356 get_zeroed_page(GFP_KERNEL); 357 if (!map->active.ring) ^^^^^^^^^^^^^^^^^ Check
358 goto out; 359 360 map->active.ring->ring_order = PVCALLS_RING_ORDER; 361 bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 362 PVCALLS_RING_ORDER); 363 if (!bytes) 364 goto out; 365 366 map->active.data.in = bytes; 367 map->active.data.out = bytes + 368 XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER); 369 370 return 0; 371 372 out: --> 373 free_active_ring(map); ^^^ Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences.
Fixes: 9f51c05dc41a ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock") Reported-by: Dan Carpenter dan.carpenter@oracle.com Suggested-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Wen Yang wen.yang99@zte.com.cn Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com CC: Boris Ostrovsky boris.ostrovsky@oracle.com CC: Juergen Gross jgross@suse.com CC: Stefano Stabellini sstabellini@kernel.org CC: Dan Carpenter dan.carpenter@oracle.com CC: xen-devel@lists.xenproject.org CC: linux-kernel@vger.kernel.org Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-front.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c index 6357160d466a..91da7e44d5d4 100644 --- a/drivers/xen/pvcalls-front.c +++ b/drivers/xen/pvcalls-front.c @@ -343,6 +343,9 @@ int pvcalls_front_socket(struct socket *sock)
static void free_active_ring(struct sock_mapping *map) { + if (!map->active.ring) + return; + free_pages((unsigned long)map->active.data.in, map->active.ring->ring_order); free_page((unsigned long)map->active.ring);
From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com
[ Upstream commit b1c0330823fe842dbb34641f1410f0afa51c29d3 ]
Some systems have had functional issues since commit 5a8361f7ecce (ACPICA: Integrate package handling with module-level code) that, among other things, changed the initial values of the acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to be called before acpi_load_tables() on the vast majority of platforms.
Namely, before commit 5a8361f7ecce, acpi_load_tables() was called from acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and acpi_gbl_group_module_level_code was TRUE, which almost always was the case as FALSE and TRUE were their initial values, respectively. The acpi_gbl_parse_table_as_term_list value would be changed to TRUE for a couple of platforms in acpi_quirks_dmi_table[], but it remained FALSE in the vast majority of cases.
After commit 5a8361f7ecce, the initial values of the two flags have been reversed, so in effect acpi_load_tables() has not been called from acpi_early_init() any more. That, in turn, affects acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now and it is not possible to evaluate the _REG method for the EC address space handler installed by it. That effectively causes the EC address space to be inaccessible to AML on platforms with an ECDT matching the EC device definition in the DSDT and functional problems ensue in there.
Because the default behavior before commit 5a8361f7ecce was to call acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to do that again. Moreover, the EC address space handler installed by acpi_ec_ecdt_probe() is only needed for AML to be able to access the EC address space and the only AML that can run during acpi_load_tables() is module-level code which only is allowed to access address spaces with default handlers (memory, I/O and PCI config space).
For this reason, move the acpi_ec_ecdt_probe() invocation back to acpi_bus_init(), from where it was taken away by commit d737f333b211 (ACPI: probe ECDT before loading AML tables regardless of module-level code flag), and put it after the invocation of acpi_load_tables() to restore the original code ordering from before commit 5a8361f7ecce.
Fixes: 5a8361f7ecce ("ACPICA: Integrate package handling with module-level code") Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981 Reported-by: step-ali sunmooon15@gmail.com Reported-by: Charles Stanhope charles.stanhope@gmail.com Tested-by: Charles Stanhope charles.stanhope@gmail.com Reported-by: Paulo Nascimento paulo.ulusu@googlemail.com Reported-by: David Purton dcpurton@marshwiggle.net Reported-by: Adam Harvey adam@adamharvey.name Reported-by: Zhang Rui rui.zhang@intel.com Tested-by: Zhang Rui rui.zhang@intel.com Tested-by: Jean-Marc Lenoir archlinux@jihemel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/bus.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index bb3d96dea6db..26d4164d394f 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1054,18 +1054,6 @@ void __init acpi_early_init(void) goto error0; }
- /* - * ACPI 2.0 requires the EC driver to be loaded and work before - * the EC device is found in the namespace (i.e. before - * acpi_load_tables() is called). - * - * This is accomplished by looking for the ECDT table, and getting - * the EC parameters out of that. - * - * Ignore the result. Not having an ECDT is not fatal. - */ - status = acpi_ec_ecdt_probe(); - #ifdef CONFIG_X86 if (!acpi_ioapic) { /* compatible (0) means level (3) */ @@ -1142,6 +1130,18 @@ static int __init acpi_bus_init(void) goto error1; }
+ /* + * ACPI 2.0 requires the EC driver to be loaded and work before the EC + * device is found in the namespace. + * + * This is accomplished by looking for the ECDT table and getting the EC + * parameters out of that. + * + * Do that before calling acpi_initialize_objects() which may trigger EC + * address space accesses. + */ + acpi_ec_ecdt_probe(); + status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX
From: Heiner Kallweit hkallweit1@gmail.com
[ Upstream commit 1d16073a326891c2a964e4cb95bc18fbcafb5f74 ]
So far genphy_soft_reset was used automatically if the PHY driver didn't implement the soft_reset callback. This changed with the mentioned commit and broke KSZ9031. To fix this configure the KSZ9031 PHY driver to use genphy_soft_reset.
Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Reported-by: Tony Lindgren tony@atomide.com Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Tested-by: Tony Lindgren tony@atomide.com Tested-by: Sekhar Nori nsekhar@ti.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 51611c7a23d1..22dfbd4c6aaf 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1076,6 +1076,7 @@ static struct phy_driver ksphy_driver[] = { .driver_data = &ksz9021_type, .probe = kszphy_probe, .config_init = ksz9031_config_init, + .soft_reset = genphy_soft_reset, .read_status = ksz9031_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr,
From: Davide Caratti dcaratti@redhat.com
[ Upstream commit e413615502a3324daba038f529932ba9a5248af0 ]
After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase:
ba4e - Add tunnel_key set action with missing mandatory id parameter
because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels.
Signed-off-by: Davide Caratti dcaratti@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../tc-tests/actions/tunnel_key.json | 29 ------------------- 1 file changed, 29 deletions(-)
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json index 10b2d894e436..af5e99d27229 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json @@ -81,35 +81,6 @@ ] ] }, - { - "id": "ba4e", - "name": "Add tunnel_key set action with missing mandatory id parameter", - "category": [ - "actions", - "tunnel_key" - ], - "setup": [ - [ - "$TC actions flush action tunnel_key", - 0, - 1, - 255 - ] - ], - "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2", - "expExitCode": "255", - "verifyCmd": "$TC actions list action tunnel_key", - "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2", - "matchCount": "0", - "teardown": [ - [ - "$TC actions flush action tunnel_key", - 0, - 1, - 255 - ] - ] - }, { "id": "a5e0", "name": "Add tunnel_key set action with invalid src_ip parameter",
From: Davide Caratti dcaratti@redhat.com
[ Upstream commit 5216bd77798e2ed773ecd45f3f368dcaec63e5dd ]
After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case:
7a88 - Add tunnel_key action with cookie parameter
Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again.
Signed-off-by: Davide Caratti dcaratti@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/tc-testing/tc-tests/actions/tunnel_key.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json index af5e99d27229..e7e15a7336b6 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json @@ -605,7 +605,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7 index 4 cookie aa11bb22cc33dd44ee55ff66aa11b1b2", "expExitCode": "0", "verifyCmd": "$TC actions get action tunnel_key index 4", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*dst_port 0.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2", "matchCount": "1", "teardown": [ "$TC actions flush action tunnel_key"
From: Davide Caratti dcaratti@redhat.com
[ Upstream commit 91fa038d9446b5bf5ea80822790af7dd9bcbb5a2 ]
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases:
7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control dccb - Create valid ife decode action with pipe control 7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control 219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control b330 - Create ife encode action with cookie
Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries. While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
Signed-off-by: Davide Caratti dcaratti@redhat.com Acked-by: Stephen Hemminger stephen@networkplumber.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../tc-testing/tc-tests/actions/ife.json | 88 +++++++++---------- 1 file changed, 44 insertions(+), 44 deletions(-)
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json index 637ea0219617..0da3545cabdb 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json @@ -17,7 +17,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 2", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -41,7 +41,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 10 pipe index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark.*index 2", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -65,7 +65,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark continue index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*allow mark.*index 2", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*allow mark.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -89,7 +89,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 789 drop index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*use mark 789.*index 2", + "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*use mark 789.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -113,7 +113,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 656768 reclassify index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 656768.*index 2", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 656768.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -137,7 +137,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 65 jump 1 index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0xED3E.*use mark 65.*index 2", + "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0[xX]ED3E.*use mark 65.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -161,7 +161,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295 reclassify index 90", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 90", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 4294967295.*index 90", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 4294967295.*index 90", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -185,7 +185,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295999 pipe index 90", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 90", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark 4294967295999.*index 90", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark 4294967295999.*index 90", "matchCount": "0", "teardown": [] }, @@ -207,7 +207,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio pass index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow prio.*index 9", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow prio.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -231,7 +231,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 7 pipe index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 7.*index 9", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 7.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -255,7 +255,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 3 continue index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use prio 3.*index 9", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use prio 3.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -279,7 +279,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio drop index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow prio.*index 9", + "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow prio.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -303,7 +303,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 998877 reclassify index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 998877.*index 9", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 998877.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -327,7 +327,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 998877 jump 10 index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0xED3E.*use prio 998877.*index 9", + "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0[xX]ED3E.*use prio 998877.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -351,7 +351,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 4294967295 reclassify index 99", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 99", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 4294967295.*index 99", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 4294967295.*index 99", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -375,7 +375,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 4294967298 pipe index 99", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 99", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 4294967298.*index 99", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 4294967298.*index 99", "matchCount": "0", "teardown": [] }, @@ -397,7 +397,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -421,7 +421,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 111 pipe index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 111.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 111.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -445,7 +445,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -469,7 +469,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -493,7 +493,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex drop index 77", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 77", - "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow tcindex.*index 77", + "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow tcindex.*index 77", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -517,7 +517,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex reclassify index 77", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 77", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*allow tcindex.*index 77", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*allow tcindex.*index 77", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -541,7 +541,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex jump 999 index 77", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 77", - "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0xED3E.*allow tcindex.*index 77", + "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0[xX]ED3E.*allow tcindex.*index 77", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -565,7 +565,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 65535 pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*use tcindex 65535.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*use tcindex 65535.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -589,7 +589,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 65539 pipe index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 65539.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 65539.*index 1", "matchCount": "0", "teardown": [] }, @@ -611,7 +611,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark src 00:11:22:33:44:55 pipe index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow mark src 00:11:22:33:44:55.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow mark src 00:11:22:33:44:55.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -635,7 +635,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 9876 dst 00:11:22:33:44:55 reclassify index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -659,7 +659,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex src 00:aa:bb:cc:dd:ee dst 00:11:22:33:44:55 pass index 11", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 11", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -683,7 +683,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 7 type 0xfefe pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xFEFE.*use mark 7.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]FEFE.*use mark 7.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -707,7 +707,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 444 type 0xabba pipe index 21", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 21", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xABBA.*use prio 444.*index 21", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ABBA.*use prio 444.*index 21", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -731,7 +731,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 5000 type 0xabcd reclassify index 21", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 21", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xABCD.*use tcindex 5000.*index 21", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ABCD.*use tcindex 5000.*index 21", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -739,7 +739,7 @@ }, { "id": "fac3", - "name": "Create valid ife encode action with index at 32-bit maximnum", + "name": "Create valid ife encode action with index at 32-bit maximum", "category": [ "actions", "ife" @@ -755,7 +755,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 4294967295", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -779,7 +779,7 @@ "cmdUnderTest": "$TC actions add action ife decode pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action pass.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action pass.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -803,7 +803,7 @@ "cmdUnderTest": "$TC actions add action ife decode pipe index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -827,7 +827,7 @@ "cmdUnderTest": "$TC actions add action ife decode continue index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action continue.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action continue.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -851,7 +851,7 @@ "cmdUnderTest": "$TC actions add action ife decode drop index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action drop.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action drop.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -875,7 +875,7 @@ "cmdUnderTest": "$TC actions add action ife decode reclassify index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -899,7 +899,7 @@ "cmdUnderTest": "$TC actions add action ife decode jump 10 index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -923,7 +923,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295999", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4294967295999", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295999", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295999", "matchCount": "0", "teardown": [] }, @@ -945,7 +945,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark kuka index 4", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0xED3E.*allow mark.*index 4", + "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0[xX]ED3E.*allow mark.*index 4", "matchCount": "0", "teardown": [] }, @@ -967,7 +967,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio pipe index 4 cookie aabbccddeeff112233445566778800a1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1", "matchCount": "1", "teardown": [ "$TC actions flush action ife" @@ -991,7 +991,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow foo pipe index 4", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow foo.*index 4", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow foo.*index 4", "matchCount": "0", "teardown": [] }, @@ -1013,7 +1013,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio type 70000 pipe index 4", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0x11170.*allow prio.*index 4", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]11170.*allow prio.*index 4", "matchCount": "0", "teardown": [] },
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit d2fd6e81912a665993b24dcdc1c1384a42a54f7e ]
The disable_acs_redir parameter stores a pointer to the string passed to pci_setup(). However, the string passed to PCI setup is actually a temporary copy allocated in static __initdata memory. After init, once the memory is freed, it is no longer valid to reference this pointer.
This bug was noticed in v5.0-rc1 after a change in commit c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") caused pci_disable_acs_redir() to be called during shutdown which manifested as an unable to handle kernel paging request at:
RIP: 0010:pci_enable_acs+0x3f/0x1e0 Call Trace: pci_restore_state.part.44+0x159/0x3c0 pci_restore_standard_config+0x33/0x40 pci_pm_runtime_resume+0x2b/0xd0 ? pci_restore_standard_config+0x40/0x40 __rpm_callback+0xbc/0x1b0 rpm_callback+0x1f/0x70 ? pci_restore_standard_config+0x40/0x40 rpm_resume+0x4f9/0x710 ? pci_conf1_read+0xb6/0xf0 ? pci_conf1_write+0xb2/0xe0 __pm_runtime_resume+0x47/0x70 pci_device_shutdown+0x1e/0x60 device_shutdown+0x14a/0x1f0 kernel_restart+0xe/0x50 __do_sys_reboot+0x1ee/0x210 ? __fput+0x144/0x1d0 do_writev+0x5e/0xf0 ? do_writev+0x5e/0xf0 do_syscall_64+0x48/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9
It was also likely possible to trigger this bug when hotplugging PCI devices.
To fix this, instead of storing a pointer, we use kstrdup() to copy the disable_acs_redir_param to its own buffer which will never be freed.
Fixes: aaca43fda742 ("PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support") Tested-by: Jarkko Nikula jarkko.nikula@linux.intel.com Signed-off-by: Logan Gunthorpe logang@deltatee.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Jarkko Nikula jarkko.nikula@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c9d8e3c837de..c25acace7d91 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -6195,7 +6195,8 @@ static int __init pci_setup(char *str) } else if (!strncmp(str, "pcie_scan_all", 13)) { pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); } else if (!strncmp(str, "disable_acs_redir=", 18)) { - disable_acs_redir_param = str + 18; + disable_acs_redir_param = + kstrdup(str + 18, GFP_KERNEL); } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str);
From: Marc Dionne marc.dionne@auristor.com
[ Upstream commit 4882a27cec24319d10f95e978ecc80050e3e3e15 ]
A cb_interest record is not necessarily attached to the vnode on entry to afs_validate(), which can cause an oops when we try to bring the vnode's cb_s_break up to date in the default case (ie. no current callback promise and the vnode has not been deleted).
Fix this by simply removing the line, as vnode->cb_s_break will be set when needed by afs_register_server_cb_interest() when we next get a callback promise from RPC call.
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 ... RIP: 0010:afs_validate+0x66/0x250 [kafs] ... Call Trace: afs_d_revalidate+0x8d/0x340 [kafs] ? __d_lookup+0x61/0x150 lookup_dcache+0x44/0x70 ? lookup_dcache+0x44/0x70 __lookup_hash+0x24/0xa0 do_unlinkat+0x11d/0x2c0 __x64_sys_unlink+0x23/0x30 do_syscall_64+0x4d/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: ae3b7361dc0e ("afs: Fix validation/callback interaction") Signed-off-by: Marc Dionne marc.dionne@auristor.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/inode.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 6b17d3620414..211343831c30 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -414,7 +414,6 @@ int afs_validate(struct afs_vnode *vnode, struct key *key) } else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) { valid = true; } else { - vnode->cb_s_break = vnode->cb_interest->server->cb_s_break; vnode->cb_v_break = vnode->volume->cb_v_break; valid = false; }
From: David Howells dhowells@redhat.com
[ Upstream commit 59d49076ae3e6912e6d7df2fd68e2337f3d02036 ]
Fix the refcounting of the authentication keys in the file locking code. The vnode->lock_key member points to a key on which it expects to be holding a ref, but it isn't always given an extra ref, however.
Fixes: 0fafdc9f888b ("afs: Fix file locking") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/flock.c | 4 ++-- fs/afs/inode.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/afs/flock.c b/fs/afs/flock.c index 0568fd986821..e432bd27a2e7 100644 --- a/fs/afs/flock.c +++ b/fs/afs/flock.c @@ -208,7 +208,7 @@ again: /* The new front of the queue now owns the state variables. */ next = list_entry(vnode->pending_locks.next, struct file_lock, fl_u.afs.link); - vnode->lock_key = afs_file_key(next->fl_file); + vnode->lock_key = key_get(afs_file_key(next->fl_file)); vnode->lock_type = (next->fl_type == F_RDLCK) ? AFS_LOCK_READ : AFS_LOCK_WRITE; vnode->lock_state = AFS_VNODE_LOCK_WAITING_FOR_CB; goto again; @@ -413,7 +413,7 @@ static void afs_dequeue_lock(struct afs_vnode *vnode, struct file_lock *fl) /* The new front of the queue now owns the state variables. */ next = list_entry(vnode->pending_locks.next, struct file_lock, fl_u.afs.link); - vnode->lock_key = afs_file_key(next->fl_file); + vnode->lock_key = key_get(afs_file_key(next->fl_file)); vnode->lock_type = (next->fl_type == F_RDLCK) ? AFS_LOCK_READ : AFS_LOCK_WRITE; vnode->lock_state = AFS_VNODE_LOCK_WAITING_FOR_CB; afs_lock_may_be_available(vnode); diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 211343831c30..1a4ce07fb406 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -545,6 +545,8 @@ void afs_evict_inode(struct inode *inode) #endif
afs_put_permits(rcu_access_pointer(vnode->permit_cache)); + key_put(vnode->lock_key); + vnode->lock_key = NULL; _leave(""); }
From: David Howells dhowells@redhat.com
[ Upstream commit 7a75b0079a1d54e342c502c3c8107ba97e05d3d3 ]
Provide a function to get a reference on an afs_call struct.
Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/rxrpc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index a7b44863d502..4830e0a6bf1d 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -203,20 +203,26 @@ void afs_put_call(struct afs_call *call) } }
+static struct afs_call *afs_get_call(struct afs_call *call, + enum afs_call_trace why) +{ + int u = atomic_inc_return(&call->usage); + + trace_afs_call(call, why, u, + atomic_read(&call->net->nr_outstanding_calls), + __builtin_return_address(0)); + return call; +} + /* * Queue the call for actual work. */ static void afs_queue_call_work(struct afs_call *call) { if (call->type->work) { - int u = atomic_inc_return(&call->usage); - - trace_afs_call(call, afs_call_trace_work, u, - atomic_read(&call->net->nr_outstanding_calls), - __builtin_return_address(0)); - INIT_WORK(&call->work, call->type->work);
+ afs_get_call(call, afs_call_trace_work); if (!queue_work(afs_wq, &call->work)) afs_put_call(call); }
From: David Howells dhowells@redhat.com
[ Upstream commit 34fa47612bfe5d7de7fcaf658a6952b6aeec3b13 ]
There's a race between afs_make_call() and afs_wake_up_async_call() in the case that an error is returned from rxrpc_kernel_send_data() after it has queued the final packet.
afs_make_call() will try and clean up the mess, but the call state may have been moved on thereby causing afs_process_async_call() to also try and to delete the call.
Fix this by:
(1) Getting an extra ref for an asynchronous call for the call itself to hold. This makes sure the call doesn't evaporate on us accidentally and will allow the call to be retained by the caller in a future patch. The ref is released on leaving afs_make_call() or afs_wait_for_call_to_complete().
(2) In the event of an error from rxrpc_kernel_send_data():
(a) Don't set the call state to AFS_CALL_COMPLETE until *after* the call has been aborted and ended. This prevents afs_deliver_to_call() from doing anything with any notifications it gets.
(b) Explicitly end the call immediately to prevent further callbacks.
(c) Cancel any queued async_work and wait for the work if it's executing. This allows us to be sure the race won't recur when we change the state. We put the work queue's ref on the call if we managed to cancel it.
(d) Put the call's ref that we got in (1). This belongs to us as long as the call is in state AFS_CALL_CL_REQUESTING.
Fixes: 341f741f04be ("afs: Refcount the afs_call struct") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/rxrpc.c | 35 ++++++++++++++++++++++++++++++----- include/trace/events/afs.h | 2 ++ 2 files changed, 32 insertions(+), 5 deletions(-)
diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index 4830e0a6bf1d..2c588f9bbbda 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -23,6 +23,7 @@ struct workqueue_struct *afs_async_calls; static void afs_wake_up_call_waiter(struct sock *, struct rxrpc_call *, unsigned long); static long afs_wait_for_call_to_complete(struct afs_call *, struct afs_addr_cursor *); static void afs_wake_up_async_call(struct sock *, struct rxrpc_call *, unsigned long); +static void afs_delete_async_call(struct work_struct *); static void afs_process_async_call(struct work_struct *); static void afs_rx_new_call(struct sock *, struct rxrpc_call *, unsigned long); static void afs_rx_discard_new_call(struct rxrpc_call *, unsigned long); @@ -404,6 +405,12 @@ long afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, } }
+ /* If the call is going to be asynchronous, we need an extra ref for + * the call to hold itself so the caller need not hang on to its ref. + */ + if (call->async) + afs_get_call(call, afs_call_trace_get); + /* create a call */ rxcall = rxrpc_kernel_begin_call(call->net->socket, srx, call->key, (unsigned long)call, @@ -444,15 +451,17 @@ long afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, goto error_do_abort; }
- /* at this point, an async call may no longer exist as it may have - * already completed */ - if (call->async) + /* Note that at this point, we may have received the reply or an abort + * - and an asynchronous call may already have completed. + */ + if (call->async) { + afs_put_call(call); return -EINPROGRESS; + }
return afs_wait_for_call_to_complete(call, ac);
error_do_abort: - call->state = AFS_CALL_COMPLETE; if (ret != -ECONNABORTED) { rxrpc_kernel_abort_call(call->net->socket, rxcall, RX_USER_ABORT, ret, "KSD"); @@ -469,8 +478,24 @@ error_do_abort: error_kill_call: if (call->type->done) call->type->done(call); - afs_put_call(call); + + /* We need to dispose of the extra ref we grabbed for an async call. + * The call, however, might be queued on afs_async_calls and we need to + * make sure we don't get any more notifications that might requeue it. + */ + if (call->rxcall) { + rxrpc_kernel_end_call(call->net->socket, call->rxcall); + call->rxcall = NULL; + } + if (call->async) { + if (cancel_work_sync(&call->async_work)) + afs_put_call(call); + afs_put_call(call); + } + ac->error = ret; + call->state = AFS_CALL_COMPLETE; + afs_put_call(call); _leave(" = %d", ret); return ret; } diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h index 33d291888ba9..e3f005eae1f7 100644 --- a/include/trace/events/afs.h +++ b/include/trace/events/afs.h @@ -25,6 +25,7 @@ enum afs_call_trace { afs_call_trace_alloc, afs_call_trace_free, + afs_call_trace_get, afs_call_trace_put, afs_call_trace_wake, afs_call_trace_work, @@ -159,6 +160,7 @@ enum afs_file_error { #define afs_call_traces \ EM(afs_call_trace_alloc, "ALLOC") \ EM(afs_call_trace_free, "FREE ") \ + EM(afs_call_trace_get, "GET ") \ EM(afs_call_trace_put, "PUT ") \ EM(afs_call_trace_wake, "WAKE ") \ E_(afs_call_trace_work, "WORK ")
From: Stanislav Fomichev sdf@google.com
[ Upstream commit 0b698005a9d11c0e91141ec11a2c4918a129f703 ]
Build-id length is not fixed to 20, it can be (`man ld` /--build-id): * 128-bit (uuid) * 160-bit (sha1) * any length specified in ld --build-id=0xhexstring
To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20. Set the remaining bytes to zero.
v2: * don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition
Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu songliubraving@fb.com Signed-off-by: Stanislav Fomichev sdf@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/stackmap.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c index d9e2483669d0..f9df545e92f6 100644 --- a/kernel/bpf/stackmap.c +++ b/kernel/bpf/stackmap.c @@ -180,11 +180,14 @@ static inline int stack_map_parse_build_id(void *page_addr,
if (nhdr->n_type == BPF_BUILD_ID && nhdr->n_namesz == sizeof("GNU") && - nhdr->n_descsz == BPF_BUILD_ID_SIZE) { + nhdr->n_descsz > 0 && + nhdr->n_descsz <= BPF_BUILD_ID_SIZE) { memcpy(build_id, note_start + note_offs + ALIGN(sizeof("GNU"), 4) + sizeof(Elf32_Nhdr), - BPF_BUILD_ID_SIZE); + nhdr->n_descsz); + memset(build_id + nhdr->n_descsz, 0, + BPF_BUILD_ID_SIZE - nhdr->n_descsz); return 0; } new_offs = note_offs + sizeof(Elf32_Nhdr) +
From: Stanislav Fomichev sdf@google.com
[ Upstream commit 4af396ae4836c4ecab61e975b8e61270c551894d ]
When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id.
Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu songliubraving@fb.com Signed-off-by: Stanislav Fomichev sdf@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/stackmap.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c index f9df545e92f6..d43b14535827 100644 --- a/kernel/bpf/stackmap.c +++ b/kernel/bpf/stackmap.c @@ -314,6 +314,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs, for (i = 0; i < trace_nr; i++) { id_offs[i].status = BPF_STACK_BUILD_ID_IP; id_offs[i].ip = ips[i]; + memset(id_offs[i].build_id, 0, BPF_BUILD_ID_SIZE); } return; } @@ -324,6 +325,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs, /* per entry fall back to ips */ id_offs[i].status = BPF_STACK_BUILD_ID_IP; id_offs[i].ip = ips[i]; + memset(id_offs[i].build_id, 0, BPF_BUILD_ID_SIZE); continue; } id_offs[i].offset = (vma->vm_pgoff << PAGE_SHIFT) + ips[i]
From: Stanislav Fomichev sdf@google.com
[ Upstream commit f67ad87ab3120e82845521b18a2b99273a340308 ]
While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error.
Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem).
Let's retry this test a single time.
Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context") Acked-by: Song Liu songliubraving@fb.com Signed-off-by: Stanislav Fomichev sdf@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/test_progs.c | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c index 2d3c04f45530..998b6cc77ed6 100644 --- a/tools/testing/selftests/bpf/test_progs.c +++ b/tools/testing/selftests/bpf/test_progs.c @@ -1136,7 +1136,9 @@ static void test_stacktrace_build_id(void) int i, j; struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH]; int build_id_matches = 0; + int retry = 1;
+retry: err = bpf_prog_load(file, BPF_PROG_TYPE_TRACEPOINT, &obj, &prog_fd); if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno)) goto out; @@ -1249,6 +1251,19 @@ static void test_stacktrace_build_id(void) previous_key = key; } while (bpf_map_get_next_key(stackmap_fd, &previous_key, &key) == 0);
+ /* stack_map_get_build_id_offset() is racy and sometimes can return + * BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID; + * try it one more time. + */ + if (build_id_matches < 1 && retry--) { + ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE); + close(pmu_fd); + bpf_object__close(obj); + printf("%s:WARN:Didn't find expected build ID from the map, retrying\n", + __func__); + goto retry; + } + if (CHECK(build_id_matches < 1, "build id match", "Didn't find expected build ID from the map\n")) goto disable_pmu; @@ -1289,7 +1304,9 @@ static void test_stacktrace_build_id_nmi(void) int i, j; struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH]; int build_id_matches = 0; + int retry = 1;
+retry: err = bpf_prog_load(file, BPF_PROG_TYPE_PERF_EVENT, &obj, &prog_fd); if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno)) return; @@ -1384,6 +1401,19 @@ static void test_stacktrace_build_id_nmi(void) previous_key = key; } while (bpf_map_get_next_key(stackmap_fd, &previous_key, &key) == 0);
+ /* stack_map_get_build_id_offset() is racy and sometimes can return + * BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID; + * try it one more time. + */ + if (build_id_matches < 1 && retry--) { + ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE); + close(pmu_fd); + bpf_object__close(obj); + printf("%s:WARN:Didn't find expected build ID from the map, retrying\n", + __func__); + goto retry; + } + if (CHECK(build_id_matches < 1, "build id match", "Didn't find expected build ID from the map\n")) goto disable_pmu;
From: Colin Ian King colin.king@canonical.com
[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]
Shifting the 1 by exp by an int can lead to sign-extension overlow when exp is 31 since 1 is an signed int and sign-extending this result to an unsigned long long will set the upper 32 bits. Fix this by shifting an unsigned long.
Detected by cppcheck: (warning) Shifting signed 32-bit value by 31 bits is undefined behaviour
Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/he.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 29f102dcfec4..329ce9072ee9 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -717,7 +717,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev) instead of '/ 512', use '>> 9' to prevent a call to divdu3 on x86 platforms */ - rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9; + rate_cps = (unsigned long long) (1UL << exp) * (man + 512) >> 9;
if (rate_cps < 10) rate_cps = 10; /* 2.2.1 minimum payload rate is 10 cps */
From: Cheng-Min Ao tony_ao@wiwynn.com
[ Upstream commit f422449b58548a41e98fc97b259a283718e527db ]
Correct a typo in OF device ID table The last one should be 'ti,tmp442'
Signed-off-by: Cheng-Min Ao tony_ao@wiwynn.com Signed-off-by: Yu-Hsiang Chen matt_chen@wiwynn.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/tmp421.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 8844c9565d2a..7053be59ad2e 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -88,7 +88,7 @@ static const struct of_device_id tmp421_of_match[] = { .data = (void *)2 }, { - .compatible = "ti,tmp422", + .compatible = "ti,tmp442", .data = (void *)3 }, { },
From: Kangjie Lu kjlu@umn.edu
[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]
When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors.
The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code.
Signed-off-by: Kangjie Lu kjlu@umn.edu Signed-off-by: Jacek Anaszewski jacek.anaszewski@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/leds/leds-lp5523.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index a2e74feee2b2..fd64df5a57a5 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -318,7 +318,9 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
/* Let the programs run for couple of ms and check the engine status */ usleep_range(3000, 6000); - lp55xx_read(chip, LP5523_REG_STATUS, &status); + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); + if (ret) + return ret; status &= LP5523_ENG_STATUS_MASK;
if (status != LP5523_ENG_STATUS_MASK) {
From: Peter Oskolkov posk@google.com
[ Upstream commit f4924f24da8c7ef64195096817f3cde324091d97 ]
In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt().
Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf") Reported-by: Maciej Żenczykowski maze@google.com Signed-off-by: Peter Oskolkov posk@google.com Acked-by: Martin KaFai Lau kafai@fb.com Reviewed-by: Maciej Żenczykowski maze@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/filter.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/core/filter.c b/net/core/filter.c index fa9452406f21..e176b335ddc0 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3948,7 +3948,10 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock, sk->sk_rcvlowat = val ? : 1; break; case SO_MARK: - sk->sk_mark = val; + if (sk->sk_mark != val) { + sk->sk_mark = val; + sk_dst_reset(sk); + } break; default: ret = -EINVAL;
From: Yuchung Cheng ycheng@google.com
[ Upstream commit e224c390a6259c529f7b2a6bd215a087b3344f5c ]
If sch_fq packet scheduler is not used, TCP can fallback to internal pacing, but this requires sk_pacing_status to be properly set.
Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf") Signed-off-by: Yuchung Cheng ycheng@google.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: Lawrence Brakmo brakmo@fb.com Acked-by: Martin KaFai Lau kafai@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/filter.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/core/filter.c b/net/core/filter.c index e176b335ddc0..16350f8c8815 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3935,6 +3935,10 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock, sk->sk_sndbuf = max_t(int, val * 2, SOCK_MIN_SNDBUF); break; case SO_MAX_PACING_RATE: /* 32bit version */ + if (val != ~0U) + cmpxchg(&sk->sk_pacing_status, + SK_PACING_NONE, + SK_PACING_NEEDED); sk->sk_max_pacing_rate = (val == ~0U) ? ~0UL : val; sk->sk_pacing_rate = min(sk->sk_pacing_rate, sk->sk_max_pacing_rate);
From: Madalin Bucur madalin.bucur@nxp.com
[ Upstream commit c6ddfb9a963f0cac0f7365acfc87f3f3b33a3b69 ]
As txq_trans_update() only updates trans_start when the lock is held, trans_start does not get updated if NETIF_F_LLTX is declared.
Signed-off-by: Madalin Bucur madalin.bucur@nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 6e0f47f2c8a3..3e53be0fcd7e 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2051,6 +2051,7 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) bool nonlinear = skb_is_nonlinear(skb); struct rtnl_link_stats64 *percpu_stats; struct dpaa_percpu_priv *percpu_priv; + struct netdev_queue *txq; struct dpaa_priv *priv; struct qm_fd fd; int offset = 0; @@ -2100,6 +2101,11 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) if (unlikely(err < 0)) goto skb_to_fd_failed;
+ txq = netdev_get_tx_queue(net_dev, queue_mapping); + + /* LLTX requires to do our own update of trans_start */ + txq->trans_start = jiffies; + if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { fd.cmd |= cpu_to_be32(FM_FD_CMD_UPD); skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
From: Nir Dotan nird@mellanox.com
[ Upstream commit 67c14cc9b35055264fc0efed00159a7de1819f1b ]
Return an appropriate error in the case when the driver timeouts on waiting for firmware to go out of PCI reset.
Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Nir Dotan nird@mellanox.com Acked-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlxsw/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index c7901a3f2a79..a903e97793f9 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1367,10 +1367,10 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci, u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY);
if ((val & MLXSW_PCI_FW_READY_MASK) == MLXSW_PCI_FW_READY_MAGIC) - break; + return 0; cond_resched(); } while (time_before(jiffies, end)); - return 0; + return -EBUSY; }
static int mlxsw_pci_alloc_irq_vectors(struct mlxsw_pci *mlxsw_pci)
From: Ido Schimmel idosch@mellanox.com
[ Upstream commit 710ae72877378e7cde611efd30fe90502a6e5b30 ]
Externally learned entries can be added by a user or by a switch driver that is notifying the bridge driver about entries that were learned in hardware.
In the first case, the entries are not marked with the 'added_by_user' flag, which causes switch drivers to ignore them and not offload them.
The 'added_by_user' flag can be set on externally learned FDB entries based on the 'swdev_notify' parameter in br_fdb_external_learn_add(), which effectively means if the created / updated FDB entry was added by a user or not.
Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by: Ido Schimmel idosch@mellanox.com Reported-by: Alexander Petrovskiy alexpe@mellanox.com Reviewed-by: Petr Machata petrm@mellanox.com Cc: Roopa Prabhu roopa@cumulusnetworks.com Cc: Nikolay Aleksandrov nikolay@cumulusnetworks.com Cc: bridge@lists.linux-foundation.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/br_fdb.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index e56ba3912a90..8b8abf88befb 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -1102,6 +1102,8 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p, err = -ENOMEM; goto err_unlock; } + if (swdev_notify) + fdb->added_by_user = 1; fdb->added_by_external_learn = 1; fdb_notify(br, fdb, RTM_NEWNEIGH, swdev_notify); } else { @@ -1121,6 +1123,9 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p, modified = true; }
+ if (swdev_notify) + fdb->added_by_user = 1; + if (modified) fdb_notify(br, fdb, RTM_NEWNEIGH, swdev_notify); }
From: Ido Schimmel idosch@mellanox.com
[ Upstream commit 64254a2054611205798e6bde634639bc704573ac ]
The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning.
Fix this by configuring static entries with ageing disabled and roaming enabled.
In net-next we can add proper support for the newly introduced 'sticky' flag.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel idosch@mellanox.com Reported-by: Alexander Petrovskiy alexpe@mellanox.com Reviewed-by: Petr Machata petrm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 69f556ddb934..9fc6b609834b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1244,7 +1244,7 @@ mlxsw_sp_bridge_port_fdb_flush(struct mlxsw_sp *mlxsw_sp, static enum mlxsw_reg_sfd_rec_policy mlxsw_sp_sfd_rec_policy(bool dynamic) { return dynamic ? MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS : - MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY; + MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG; }
static enum mlxsw_reg_sfd_op mlxsw_sp_sfd_op(bool adding) @@ -1301,7 +1301,7 @@ out: static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port, const char *mac, u16 fid, bool adding, enum mlxsw_reg_sfd_rec_action action, - bool dynamic) + enum mlxsw_reg_sfd_rec_policy policy) { char *sfd_pl; u8 num_rec; @@ -1312,8 +1312,7 @@ static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port, return -ENOMEM;
mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0); - mlxsw_reg_sfd_uc_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic), - mac, fid, action, local_port); + mlxsw_reg_sfd_uc_pack(sfd_pl, 0, policy, mac, fid, action, local_port); num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl); err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl); if (err) @@ -1332,7 +1331,8 @@ static int mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port, bool dynamic) { return __mlxsw_sp_port_fdb_uc_op(mlxsw_sp, local_port, mac, fid, adding, - MLXSW_REG_SFD_REC_ACTION_NOP, dynamic); + MLXSW_REG_SFD_REC_ACTION_NOP, + mlxsw_sp_sfd_rec_policy(dynamic)); }
int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid, @@ -1340,7 +1340,7 @@ int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid, { return __mlxsw_sp_port_fdb_uc_op(mlxsw_sp, 0, mac, fid, adding, MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER, - false); + MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY); }
static int mlxsw_sp_port_fdb_uc_lag_op(struct mlxsw_sp *mlxsw_sp, u16 lag_id,
From: Ido Schimmel idosch@mellanox.com
[ Upstream commit 479a2b761d61c04e2ae97325aa391a8a8c99c23e ]
Test that externally learned FDB entries can roam, but not age out.
Signed-off-by: Ido Schimmel idosch@mellanox.com Reviewed-by: Petr Machata petrm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/forwarding/bridge_vlan_aware.sh | 34 ++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index 04c6431b2bd8..b90dff8d3a94 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0
-ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion" +ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn" NUM_NETIFS=4 CHECK_TC="yes" source lib.sh @@ -109,6 +109,38 @@ vlan_deletion() ping_ipv6 }
+extern_learn() +{ + local mac=de:ad:be:ef:13:37 + local ageing_time + + # Test that externally learned FDB entries can roam, but not age out + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn vlan 1 + + bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37 + check_err $? "Did not find FDB entry when should" + + # Wait for 10 seconds after the ageing time to make sure the FDB entry + # was not aged out + ageing_time=$(bridge_ageing_time_get br0) + sleep $((ageing_time + 10)) + + bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37 + check_err $? "FDB entry was aged out when should not" + + $MZ $h2 -c 1 -p 64 -a $mac -t ip -q + + bridge fdb show brport $swp2 | grep -q de:ad:be:ef:13:37 + check_err $? "FDB entry did not roam when should" + + log_test "Externally learned FDB entry - ageing & roaming" + + bridge fdb del de:ad:be:ef:13:37 dev $swp2 master vlan 1 &> /dev/null + bridge fdb del de:ad:be:ef:13:37 dev $swp1 master vlan 1 &> /dev/null +} + trap cleanup EXIT
setup_prepare
From: Daniel Borkmann daniel@iogearbox.net
[ Upstream commit ad6dd7a9c47ba587c0aba57f73737764cd31136f ]
Dan reported that bpftool does not compile for him:
$ make tools/bpf DESCEND bpf
Auto-detecting system features: .. libbfd: [ on ] .. disassembler-four-args: [ OFF ]
DESCEND bpftool
Auto-detecting system features: .. libbfd: [ on ] .. disassembler-four-args: [ OFF ]
CC /opt/linux.git/tools/bpf/bpftool/net.o In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0, from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14, from net.c:13: net.c: In function 'show_dev_tc_bpf': net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function) handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS); [...]
Fix it by importing pkt_sched.h header copy into tooling infrastructure.
Fixes: 49a249c38726 ("tools/bpftool: copy a few net uapi headers to tools directory") Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support") Reported-by: Dan Gilson dan_gilson@yahoo.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315 Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Martin KaFai Lau kafai@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/include/uapi/linux/pkt_sched.h | 1163 ++++++++++++++++++++++++++ 1 file changed, 1163 insertions(+) create mode 100644 tools/include/uapi/linux/pkt_sched.h
diff --git a/tools/include/uapi/linux/pkt_sched.h b/tools/include/uapi/linux/pkt_sched.h new file mode 100644 index 000000000000..0d18b1d1fbbc --- /dev/null +++ b/tools/include/uapi/linux/pkt_sched.h @@ -0,0 +1,1163 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_SCHED_H +#define __LINUX_PKT_SCHED_H + +#include <linux/types.h> + +/* Logical priority bands not depending on specific packet scheduler. + Every scheduler will map them to real traffic classes, if it has + no more precise mechanism to classify packets. + + These numbers have no special meaning, though their coincidence + with obsolete IPv6 values is not occasional :-). New IPv6 drafts + preferred full anarchy inspired by diffserv group. + + Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy + class, actually, as rule it will be handled with more care than + filler or even bulk. + */ + +#define TC_PRIO_BESTEFFORT 0 +#define TC_PRIO_FILLER 1 +#define TC_PRIO_BULK 2 +#define TC_PRIO_INTERACTIVE_BULK 4 +#define TC_PRIO_INTERACTIVE 6 +#define TC_PRIO_CONTROL 7 + +#define TC_PRIO_MAX 15 + +/* Generic queue statistics, available for all the elements. + Particular schedulers may have also their private records. + */ + +struct tc_stats { + __u64 bytes; /* Number of enqueued bytes */ + __u32 packets; /* Number of enqueued packets */ + __u32 drops; /* Packets dropped because of lack of resources */ + __u32 overlimits; /* Number of throttle events when this + * flow goes out of allocated bandwidth */ + __u32 bps; /* Current flow byte rate */ + __u32 pps; /* Current flow packet rate */ + __u32 qlen; + __u32 backlog; +}; + +struct tc_estimator { + signed char interval; + unsigned char ewma_log; +}; + +/* "Handles" + --------- + + All the traffic control objects have 32bit identifiers, or "handles". + + They can be considered as opaque numbers from user API viewpoint, + but actually they always consist of two fields: major and + minor numbers, which are interpreted by kernel specially, + that may be used by applications, though not recommended. + + F.e. qdisc handles always have minor number equal to zero, + classes (or flows) have major equal to parent qdisc major, and + minor uniquely identifying class inside qdisc. + + Macros to manipulate handles: + */ + +#define TC_H_MAJ_MASK (0xFFFF0000U) +#define TC_H_MIN_MASK (0x0000FFFFU) +#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK) +#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK) +#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK)) + +#define TC_H_UNSPEC (0U) +#define TC_H_ROOT (0xFFFFFFFFU) +#define TC_H_INGRESS (0xFFFFFFF1U) +#define TC_H_CLSACT TC_H_INGRESS + +#define TC_H_MIN_PRIORITY 0xFFE0U +#define TC_H_MIN_INGRESS 0xFFF2U +#define TC_H_MIN_EGRESS 0xFFF3U + +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + +struct tc_ratespec { + unsigned char cell_log; + __u8 linklayer; /* lower 4 bits */ + unsigned short overhead; + short cell_align; + unsigned short mpu; + __u32 rate; +}; + +#define TC_RTAB_SIZE 1024 + +struct tc_sizespec { + unsigned char cell_log; + unsigned char size_log; + short cell_align; + int overhead; + unsigned int linklayer; + unsigned int mpu; + unsigned int mtu; + unsigned int tsize; +}; + +enum { + TCA_STAB_UNSPEC, + TCA_STAB_BASE, + TCA_STAB_DATA, + __TCA_STAB_MAX +}; + +#define TCA_STAB_MAX (__TCA_STAB_MAX - 1) + +/* FIFO section */ + +struct tc_fifo_qopt { + __u32 limit; /* Queue length: bytes for bfifo, packets for pfifo */ +}; + +/* SKBPRIO section */ + +/* + * Priorities go from zero to (SKBPRIO_MAX_PRIORITY - 1). + * SKBPRIO_MAX_PRIORITY should be at least 64 in order for skbprio to be able + * to map one to one the DS field of IPV4 and IPV6 headers. + * Memory allocation grows linearly with SKBPRIO_MAX_PRIORITY. + */ + +#define SKBPRIO_MAX_PRIORITY 64 + +struct tc_skbprio_qopt { + __u32 limit; /* Queue length in packets. */ +}; + +/* PRIO section */ + +#define TCQ_PRIO_BANDS 16 +#define TCQ_MIN_PRIO_BANDS 2 + +struct tc_prio_qopt { + int bands; /* Number of bands */ + __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */ +}; + +/* MULTIQ section */ + +struct tc_multiq_qopt { + __u16 bands; /* Number of bands */ + __u16 max_bands; /* Maximum number of queues */ +}; + +/* PLUG section */ + +#define TCQ_PLUG_BUFFER 0 +#define TCQ_PLUG_RELEASE_ONE 1 +#define TCQ_PLUG_RELEASE_INDEFINITE 2 +#define TCQ_PLUG_LIMIT 3 + +struct tc_plug_qopt { + /* TCQ_PLUG_BUFFER: Inset a plug into the queue and + * buffer any incoming packets + * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head + * to beginning of the next plug. + * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. + * Stop buffering packets until the next TCQ_PLUG_BUFFER + * command is received (just act as a pass-thru queue). + * TCQ_PLUG_LIMIT: Increase/decrease queue size + */ + int action; + __u32 limit; +}; + +/* TBF section */ + +struct tc_tbf_qopt { + struct tc_ratespec rate; + struct tc_ratespec peakrate; + __u32 limit; + __u32 buffer; + __u32 mtu; +}; + +enum { + TCA_TBF_UNSPEC, + TCA_TBF_PARMS, + TCA_TBF_RTAB, + TCA_TBF_PTAB, + TCA_TBF_RATE64, + TCA_TBF_PRATE64, + TCA_TBF_BURST, + TCA_TBF_PBURST, + TCA_TBF_PAD, + __TCA_TBF_MAX, +}; + +#define TCA_TBF_MAX (__TCA_TBF_MAX - 1) + + +/* TEQL section */ + +/* TEQL does not require any parameters */ + +/* SFQ section */ + +struct tc_sfq_qopt { + unsigned quantum; /* Bytes per round allocated to flow */ + int perturb_period; /* Period of hash perturbation */ + __u32 limit; /* Maximal packets in queue */ + unsigned divisor; /* Hash divisor */ + unsigned flows; /* Maximal number of flows */ +}; + +struct tc_sfqred_stats { + __u32 prob_drop; /* Early drops, below max threshold */ + __u32 forced_drop; /* Early drops, after max threshold */ + __u32 prob_mark; /* Marked packets, below max threshold */ + __u32 forced_mark; /* Marked packets, after max threshold */ + __u32 prob_mark_head; /* Marked packets, below max threshold */ + __u32 forced_mark_head;/* Marked packets, after max threshold */ +}; + +struct tc_sfq_qopt_v1 { + struct tc_sfq_qopt v0; + unsigned int depth; /* max number of packets per flow */ + unsigned int headdrop; +/* SFQRED parameters */ + __u32 limit; /* HARD maximal flow queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; + __u32 max_P; /* probability, high resolution */ +/* SFQRED stats */ + struct tc_sfqred_stats stats; +}; + + +struct tc_sfq_xstats { + __s32 allot; +}; + +/* RED section */ + +enum { + TCA_RED_UNSPEC, + TCA_RED_PARMS, + TCA_RED_STAB, + TCA_RED_MAX_P, + __TCA_RED_MAX, +}; + +#define TCA_RED_MAX (__TCA_RED_MAX - 1) + +struct tc_red_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; +#define TC_RED_ECN 1 +#define TC_RED_HARDDROP 2 +#define TC_RED_ADAPTATIVE 4 +}; + +struct tc_red_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ +}; + +/* GRED section */ + +#define MAX_DPs 16 + +enum { + TCA_GRED_UNSPEC, + TCA_GRED_PARMS, + TCA_GRED_STAB, + TCA_GRED_DPS, + TCA_GRED_MAX_P, + TCA_GRED_LIMIT, + TCA_GRED_VQ_LIST, /* nested TCA_GRED_VQ_ENTRY */ + __TCA_GRED_MAX, +}; + +#define TCA_GRED_MAX (__TCA_GRED_MAX - 1) + +enum { + TCA_GRED_VQ_ENTRY_UNSPEC, + TCA_GRED_VQ_ENTRY, /* nested TCA_GRED_VQ_* */ + __TCA_GRED_VQ_ENTRY_MAX, +}; +#define TCA_GRED_VQ_ENTRY_MAX (__TCA_GRED_VQ_ENTRY_MAX - 1) + +enum { + TCA_GRED_VQ_UNSPEC, + TCA_GRED_VQ_PAD, + TCA_GRED_VQ_DP, /* u32 */ + TCA_GRED_VQ_STAT_BYTES, /* u64 */ + TCA_GRED_VQ_STAT_PACKETS, /* u32 */ + TCA_GRED_VQ_STAT_BACKLOG, /* u32 */ + TCA_GRED_VQ_STAT_PROB_DROP, /* u32 */ + TCA_GRED_VQ_STAT_PROB_MARK, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_DROP, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_MARK, /* u32 */ + TCA_GRED_VQ_STAT_PDROP, /* u32 */ + TCA_GRED_VQ_STAT_OTHER, /* u32 */ + TCA_GRED_VQ_FLAGS, /* u32 */ + __TCA_GRED_VQ_MAX +}; + +#define TCA_GRED_VQ_MAX (__TCA_GRED_VQ_MAX - 1) + +struct tc_gred_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + __u32 DP; /* up to 2^32 DPs */ + __u32 backlog; + __u32 qave; + __u32 forced; + __u32 early; + __u32 other; + __u32 pdrop; + __u8 Wlog; /* log(W) */ + __u8 Plog; /* log(P_max/(qth_max-qth_min)) */ + __u8 Scell_log; /* cell size for idle damping */ + __u8 prio; /* prio of this VQ */ + __u32 packets; + __u32 bytesin; +}; + +/* gred setup */ +struct tc_gred_sopt { + __u32 DPs; + __u32 def_DP; + __u8 grio; + __u8 flags; + __u16 pad1; +}; + +/* CHOKe section */ + +enum { + TCA_CHOKE_UNSPEC, + TCA_CHOKE_PARMS, + TCA_CHOKE_STAB, + TCA_CHOKE_MAX_P, + __TCA_CHOKE_MAX, +}; + +#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1) + +struct tc_choke_qopt { + __u32 limit; /* Hard queue length (packets) */ + __u32 qth_min; /* Min average threshold (packets) */ + __u32 qth_max; /* Max average threshold (packets) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; /* see RED flags */ +}; + +struct tc_choke_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ + __u32 matched; /* Drops due to flow match */ +}; + +/* HTB section */ +#define TC_HTB_NUMPRIO 8 +#define TC_HTB_MAXDEPTH 8 +#define TC_HTB_PROTOVER 3 /* the same as HTB and TC's major */ + +struct tc_htb_opt { + struct tc_ratespec rate; + struct tc_ratespec ceil; + __u32 buffer; + __u32 cbuffer; + __u32 quantum; + __u32 level; /* out only */ + __u32 prio; +}; +struct tc_htb_glob { + __u32 version; /* to match HTB/TC */ + __u32 rate2quantum; /* bps->quantum divisor */ + __u32 defcls; /* default class number */ + __u32 debug; /* debug flags */ + + /* stats */ + __u32 direct_pkts; /* count of non shaped packets */ +}; +enum { + TCA_HTB_UNSPEC, + TCA_HTB_PARMS, + TCA_HTB_INIT, + TCA_HTB_CTAB, + TCA_HTB_RTAB, + TCA_HTB_DIRECT_QLEN, + TCA_HTB_RATE64, + TCA_HTB_CEIL64, + TCA_HTB_PAD, + __TCA_HTB_MAX, +}; + +#define TCA_HTB_MAX (__TCA_HTB_MAX - 1) + +struct tc_htb_xstats { + __u32 lends; + __u32 borrows; + __u32 giants; /* unused since 'Make HTB scheduler work with TSO.' */ + __s32 tokens; + __s32 ctokens; +}; + +/* HFSC section */ + +struct tc_hfsc_qopt { + __u16 defcls; /* default class */ +}; + +struct tc_service_curve { + __u32 m1; /* slope of the first segment in bps */ + __u32 d; /* x-projection of the first segment in us */ + __u32 m2; /* slope of the second segment in bps */ +}; + +struct tc_hfsc_stats { + __u64 work; /* total work done */ + __u64 rtwork; /* work done by real-time criteria */ + __u32 period; /* current period */ + __u32 level; /* class level in hierarchy */ +}; + +enum { + TCA_HFSC_UNSPEC, + TCA_HFSC_RSC, + TCA_HFSC_FSC, + TCA_HFSC_USC, + __TCA_HFSC_MAX, +}; + +#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) + + +/* CBQ section */ + +#define TC_CBQ_MAXPRIO 8 +#define TC_CBQ_MAXLEVEL 8 +#define TC_CBQ_DEF_EWMA 5 + +struct tc_cbq_lssopt { + unsigned char change; + unsigned char flags; +#define TCF_CBQ_LSS_BOUNDED 1 +#define TCF_CBQ_LSS_ISOLATED 2 + unsigned char ewma_log; + unsigned char level; +#define TCF_CBQ_LSS_FLAGS 1 +#define TCF_CBQ_LSS_EWMA 2 +#define TCF_CBQ_LSS_MAXIDLE 4 +#define TCF_CBQ_LSS_MINIDLE 8 +#define TCF_CBQ_LSS_OFFTIME 0x10 +#define TCF_CBQ_LSS_AVPKT 0x20 + __u32 maxidle; + __u32 minidle; + __u32 offtime; + __u32 avpkt; +}; + +struct tc_cbq_wrropt { + unsigned char flags; + unsigned char priority; + unsigned char cpriority; + unsigned char __reserved; + __u32 allot; + __u32 weight; +}; + +struct tc_cbq_ovl { + unsigned char strategy; +#define TC_CBQ_OVL_CLASSIC 0 +#define TC_CBQ_OVL_DELAY 1 +#define TC_CBQ_OVL_LOWPRIO 2 +#define TC_CBQ_OVL_DROP 3 +#define TC_CBQ_OVL_RCLASSIC 4 + unsigned char priority2; + __u16 pad; + __u32 penalty; +}; + +struct tc_cbq_police { + unsigned char police; + unsigned char __res1; + unsigned short __res2; +}; + +struct tc_cbq_fopt { + __u32 split; + __u32 defmap; + __u32 defchange; +}; + +struct tc_cbq_xstats { + __u32 borrows; + __u32 overactions; + __s32 avgidle; + __s32 undertime; +}; + +enum { + TCA_CBQ_UNSPEC, + TCA_CBQ_LSSOPT, + TCA_CBQ_WRROPT, + TCA_CBQ_FOPT, + TCA_CBQ_OVL_STRATEGY, + TCA_CBQ_RATE, + TCA_CBQ_RTAB, + TCA_CBQ_POLICE, + __TCA_CBQ_MAX, +}; + +#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1) + +/* dsmark section */ + +enum { + TCA_DSMARK_UNSPEC, + TCA_DSMARK_INDICES, + TCA_DSMARK_DEFAULT_INDEX, + TCA_DSMARK_SET_TC_INDEX, + TCA_DSMARK_MASK, + TCA_DSMARK_VALUE, + __TCA_DSMARK_MAX, +}; + +#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1) + +/* ATM section */ + +enum { + TCA_ATM_UNSPEC, + TCA_ATM_FD, /* file/socket descriptor */ + TCA_ATM_PTR, /* pointer to descriptor - later */ + TCA_ATM_HDR, /* LL header */ + TCA_ATM_EXCESS, /* excess traffic class (0 for CLP) */ + TCA_ATM_ADDR, /* PVC address (for output only) */ + TCA_ATM_STATE, /* VC state (ATM_VS_*; for output only) */ + __TCA_ATM_MAX, +}; + +#define TCA_ATM_MAX (__TCA_ATM_MAX - 1) + +/* Network emulator */ + +enum { + TCA_NETEM_UNSPEC, + TCA_NETEM_CORR, + TCA_NETEM_DELAY_DIST, + TCA_NETEM_REORDER, + TCA_NETEM_CORRUPT, + TCA_NETEM_LOSS, + TCA_NETEM_RATE, + TCA_NETEM_ECN, + TCA_NETEM_RATE64, + TCA_NETEM_PAD, + TCA_NETEM_LATENCY64, + TCA_NETEM_JITTER64, + TCA_NETEM_SLOT, + TCA_NETEM_SLOT_DIST, + __TCA_NETEM_MAX, +}; + +#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1) + +struct tc_netem_qopt { + __u32 latency; /* added delay (us) */ + __u32 limit; /* fifo limit (packets) */ + __u32 loss; /* random packet loss (0=none ~0=100%) */ + __u32 gap; /* re-ordering gap (0 for none) */ + __u32 duplicate; /* random packet dup (0=none ~0=100%) */ + __u32 jitter; /* random jitter in latency (us) */ +}; + +struct tc_netem_corr { + __u32 delay_corr; /* delay correlation */ + __u32 loss_corr; /* packet loss correlation */ + __u32 dup_corr; /* duplicate correlation */ +}; + +struct tc_netem_reorder { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_corrupt { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_rate { + __u32 rate; /* byte/s */ + __s32 packet_overhead; + __u32 cell_size; + __s32 cell_overhead; +}; + +struct tc_netem_slot { + __s64 min_delay; /* nsec */ + __s64 max_delay; + __s32 max_packets; + __s32 max_bytes; + __s64 dist_delay; /* nsec */ + __s64 dist_jitter; /* nsec */ +}; + +enum { + NETEM_LOSS_UNSPEC, + NETEM_LOSS_GI, /* General Intuitive - 4 state model */ + NETEM_LOSS_GE, /* Gilbert Elliot models */ + __NETEM_LOSS_MAX +}; +#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) + +/* State transition probabilities for 4 state model */ +struct tc_netem_gimodel { + __u32 p13; + __u32 p31; + __u32 p32; + __u32 p14; + __u32 p23; +}; + +/* Gilbert-Elliot models */ +struct tc_netem_gemodel { + __u32 p; + __u32 r; + __u32 h; + __u32 k1; +}; + +#define NETEM_DIST_SCALE 8192 +#define NETEM_DIST_MAX 16384 + +/* DRR */ + +enum { + TCA_DRR_UNSPEC, + TCA_DRR_QUANTUM, + __TCA_DRR_MAX +}; + +#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) + +struct tc_drr_stats { + __u32 deficit; +}; + +/* MQPRIO */ +#define TC_QOPT_BITMASK 15 +#define TC_QOPT_MAX_QUEUE 16 + +enum { + TC_MQPRIO_HW_OFFLOAD_NONE, /* no offload requested */ + TC_MQPRIO_HW_OFFLOAD_TCS, /* offload TCs, no queue counts */ + __TC_MQPRIO_HW_OFFLOAD_MAX +}; + +#define TC_MQPRIO_HW_OFFLOAD_MAX (__TC_MQPRIO_HW_OFFLOAD_MAX - 1) + +enum { + TC_MQPRIO_MODE_DCB, + TC_MQPRIO_MODE_CHANNEL, + __TC_MQPRIO_MODE_MAX +}; + +#define __TC_MQPRIO_MODE_MAX (__TC_MQPRIO_MODE_MAX - 1) + +enum { + TC_MQPRIO_SHAPER_DCB, + TC_MQPRIO_SHAPER_BW_RATE, /* Add new shapers below */ + __TC_MQPRIO_SHAPER_MAX +}; + +#define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) + +struct tc_mqprio_qopt { + __u8 num_tc; + __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; + __u8 hw; + __u16 count[TC_QOPT_MAX_QUEUE]; + __u16 offset[TC_QOPT_MAX_QUEUE]; +}; + +#define TC_MQPRIO_F_MODE 0x1 +#define TC_MQPRIO_F_SHAPER 0x2 +#define TC_MQPRIO_F_MIN_RATE 0x4 +#define TC_MQPRIO_F_MAX_RATE 0x8 + +enum { + TCA_MQPRIO_UNSPEC, + TCA_MQPRIO_MODE, + TCA_MQPRIO_SHAPER, + TCA_MQPRIO_MIN_RATE64, + TCA_MQPRIO_MAX_RATE64, + __TCA_MQPRIO_MAX, +}; + +#define TCA_MQPRIO_MAX (__TCA_MQPRIO_MAX - 1) + +/* SFB */ + +enum { + TCA_SFB_UNSPEC, + TCA_SFB_PARMS, + __TCA_SFB_MAX, +}; + +#define TCA_SFB_MAX (__TCA_SFB_MAX - 1) + +/* + * Note: increment, decrement are Q0.16 fixed-point values. + */ +struct tc_sfb_qopt { + __u32 rehash_interval; /* delay between hash move, in ms */ + __u32 warmup_time; /* double buffering warmup time in ms (warmup_time < rehash_interval) */ + __u32 max; /* max len of qlen_min */ + __u32 bin_size; /* maximum queue length per bin */ + __u32 increment; /* probability increment, (d1 in Blue) */ + __u32 decrement; /* probability decrement, (d2 in Blue) */ + __u32 limit; /* max SFB queue length */ + __u32 penalty_rate; /* inelastic flows are rate limited to 'rate' pps */ + __u32 penalty_burst; +}; + +struct tc_sfb_xstats { + __u32 earlydrop; + __u32 penaltydrop; + __u32 bucketdrop; + __u32 queuedrop; + __u32 childdrop; /* drops in child qdisc */ + __u32 marked; + __u32 maxqlen; + __u32 maxprob; + __u32 avgprob; +}; + +#define SFB_MAX_PROB 0xFFFF + +/* QFQ */ +enum { + TCA_QFQ_UNSPEC, + TCA_QFQ_WEIGHT, + TCA_QFQ_LMAX, + __TCA_QFQ_MAX +}; + +#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) + +struct tc_qfq_stats { + __u32 weight; + __u32 lmax; +}; + +/* CODEL */ + +enum { + TCA_CODEL_UNSPEC, + TCA_CODEL_TARGET, + TCA_CODEL_LIMIT, + TCA_CODEL_INTERVAL, + TCA_CODEL_ECN, + TCA_CODEL_CE_THRESHOLD, + __TCA_CODEL_MAX +}; + +#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) + +struct tc_codel_xstats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 count; /* how many drops we've done since the last time we + * entered dropping state + */ + __u32 lastcount; /* count at entry to dropping state */ + __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */ + __s32 drop_next; /* time to drop next packet */ + __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */ + __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */ + __u32 dropping; /* are we in dropping state ? */ + __u32 ce_mark; /* number of CE marked packets because of ce_threshold */ +}; + +/* FQ_CODEL */ + +enum { + TCA_FQ_CODEL_UNSPEC, + TCA_FQ_CODEL_TARGET, + TCA_FQ_CODEL_LIMIT, + TCA_FQ_CODEL_INTERVAL, + TCA_FQ_CODEL_ECN, + TCA_FQ_CODEL_FLOWS, + TCA_FQ_CODEL_QUANTUM, + TCA_FQ_CODEL_CE_THRESHOLD, + TCA_FQ_CODEL_DROP_BATCH_SIZE, + TCA_FQ_CODEL_MEMORY_LIMIT, + __TCA_FQ_CODEL_MAX +}; + +#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) + +enum { + TCA_FQ_CODEL_XSTATS_QDISC, + TCA_FQ_CODEL_XSTATS_CLASS, +}; + +struct tc_fq_codel_qd_stats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 drop_overlimit; /* number of time max qdisc + * packet limit was hit + */ + __u32 ecn_mark; /* number of packets we ECN marked + * instead of being dropped + */ + __u32 new_flow_count; /* number of time packets + * created a 'new flow' + */ + __u32 new_flows_len; /* count of flows in new list */ + __u32 old_flows_len; /* count of flows in old list */ + __u32 ce_mark; /* packets above ce_threshold */ + __u32 memory_usage; /* in bytes */ + __u32 drop_overmemory; +}; + +struct tc_fq_codel_cl_stats { + __s32 deficit; + __u32 ldelay; /* in-queue delay seen by most recently + * dequeued packet + */ + __u32 count; + __u32 lastcount; + __u32 dropping; + __s32 drop_next; +}; + +struct tc_fq_codel_xstats { + __u32 type; + union { + struct tc_fq_codel_qd_stats qdisc_stats; + struct tc_fq_codel_cl_stats class_stats; + }; +}; + +/* FQ */ + +enum { + TCA_FQ_UNSPEC, + + TCA_FQ_PLIMIT, /* limit of total number of packets in queue */ + + TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */ + + TCA_FQ_QUANTUM, /* RR quantum */ + + TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */ + + TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */ + + TCA_FQ_FLOW_DEFAULT_RATE,/* obsolete, do not use */ + + TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */ + + TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */ + + TCA_FQ_FLOW_REFILL_DELAY, /* flow credit refill delay in usec */ + + TCA_FQ_ORPHAN_MASK, /* mask applied to orphaned skb hashes */ + + TCA_FQ_LOW_RATE_THRESHOLD, /* per packet delay under this rate */ + + TCA_FQ_CE_THRESHOLD, /* DCTCP-like CE-marking threshold */ + + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +struct tc_fq_qd_stats { + __u64 gc_flows; + __u64 highprio_packets; + __u64 tcp_retrans; + __u64 throttled; + __u64 flows_plimit; + __u64 pkts_too_long; + __u64 allocation_errors; + __s64 time_next_delayed_flow; + __u32 flows; + __u32 inactive_flows; + __u32 throttled_flows; + __u32 unthrottle_latency_ns; + __u64 ce_mark; /* packets above ce_threshold */ +}; + +/* Heavy-Hitter Filter */ + +enum { + TCA_HHF_UNSPEC, + TCA_HHF_BACKLOG_LIMIT, + TCA_HHF_QUANTUM, + TCA_HHF_HH_FLOWS_LIMIT, + TCA_HHF_RESET_TIMEOUT, + TCA_HHF_ADMIT_BYTES, + TCA_HHF_EVICT_TIMEOUT, + TCA_HHF_NON_HH_WEIGHT, + __TCA_HHF_MAX +}; + +#define TCA_HHF_MAX (__TCA_HHF_MAX - 1) + +struct tc_hhf_xstats { + __u32 drop_overlimit; /* number of times max qdisc packet limit + * was hit + */ + __u32 hh_overlimit; /* number of times max heavy-hitters was hit */ + __u32 hh_tot_count; /* number of captured heavy-hitters so far */ + __u32 hh_cur_count; /* number of current heavy-hitters */ +}; + +/* PIE */ +enum { + TCA_PIE_UNSPEC, + TCA_PIE_TARGET, + TCA_PIE_LIMIT, + TCA_PIE_TUPDATE, + TCA_PIE_ALPHA, + TCA_PIE_BETA, + TCA_PIE_ECN, + TCA_PIE_BYTEMODE, + __TCA_PIE_MAX +}; +#define TCA_PIE_MAX (__TCA_PIE_MAX - 1) + +struct tc_pie_xstats { + __u32 prob; /* current probability */ + __u32 delay; /* current delay in ms */ + __u32 avg_dq_rate; /* current average dq_rate in bits/pie_time */ + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to pie_action */ + __u32 overlimit; /* dropped due to lack of space in queue */ + __u32 maxq; /* maximum queue size */ + __u32 ecn_mark; /* packets marked with ecn*/ +}; + +/* CBS */ +struct tc_cbs_qopt { + __u8 offload; + __u8 _pad[3]; + __s32 hicredit; + __s32 locredit; + __s32 idleslope; + __s32 sendslope; +}; + +enum { + TCA_CBS_UNSPEC, + TCA_CBS_PARMS, + __TCA_CBS_MAX, +}; + +#define TCA_CBS_MAX (__TCA_CBS_MAX - 1) + + +/* ETF */ +struct tc_etf_qopt { + __s32 delta; + __s32 clockid; + __u32 flags; +#define TC_ETF_DEADLINE_MODE_ON BIT(0) +#define TC_ETF_OFFLOAD_ON BIT(1) +}; + +enum { + TCA_ETF_UNSPEC, + TCA_ETF_PARMS, + __TCA_ETF_MAX, +}; + +#define TCA_ETF_MAX (__TCA_ETF_MAX - 1) + + +/* CAKE */ +enum { + TCA_CAKE_UNSPEC, + TCA_CAKE_PAD, + TCA_CAKE_BASE_RATE64, + TCA_CAKE_DIFFSERV_MODE, + TCA_CAKE_ATM, + TCA_CAKE_FLOW_MODE, + TCA_CAKE_OVERHEAD, + TCA_CAKE_RTT, + TCA_CAKE_TARGET, + TCA_CAKE_AUTORATE, + TCA_CAKE_MEMORY, + TCA_CAKE_NAT, + TCA_CAKE_RAW, + TCA_CAKE_WASH, + TCA_CAKE_MPU, + TCA_CAKE_INGRESS, + TCA_CAKE_ACK_FILTER, + TCA_CAKE_SPLIT_GSO, + __TCA_CAKE_MAX +}; +#define TCA_CAKE_MAX (__TCA_CAKE_MAX - 1) + +enum { + __TCA_CAKE_STATS_INVALID, + TCA_CAKE_STATS_PAD, + TCA_CAKE_STATS_CAPACITY_ESTIMATE64, + TCA_CAKE_STATS_MEMORY_LIMIT, + TCA_CAKE_STATS_MEMORY_USED, + TCA_CAKE_STATS_AVG_NETOFF, + TCA_CAKE_STATS_MIN_NETLEN, + TCA_CAKE_STATS_MAX_NETLEN, + TCA_CAKE_STATS_MIN_ADJLEN, + TCA_CAKE_STATS_MAX_ADJLEN, + TCA_CAKE_STATS_TIN_STATS, + TCA_CAKE_STATS_DEFICIT, + TCA_CAKE_STATS_COBALT_COUNT, + TCA_CAKE_STATS_DROPPING, + TCA_CAKE_STATS_DROP_NEXT_US, + TCA_CAKE_STATS_P_DROP, + TCA_CAKE_STATS_BLUE_TIMER_US, + __TCA_CAKE_STATS_MAX +}; +#define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1) + +enum { + __TCA_CAKE_TIN_STATS_INVALID, + TCA_CAKE_TIN_STATS_PAD, + TCA_CAKE_TIN_STATS_SENT_PACKETS, + TCA_CAKE_TIN_STATS_SENT_BYTES64, + TCA_CAKE_TIN_STATS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ECN_MARKED_PACKETS, + TCA_CAKE_TIN_STATS_ECN_MARKED_BYTES64, + TCA_CAKE_TIN_STATS_BACKLOG_PACKETS, + TCA_CAKE_TIN_STATS_BACKLOG_BYTES, + TCA_CAKE_TIN_STATS_THRESHOLD_RATE64, + TCA_CAKE_TIN_STATS_TARGET_US, + TCA_CAKE_TIN_STATS_INTERVAL_US, + TCA_CAKE_TIN_STATS_WAY_INDIRECT_HITS, + TCA_CAKE_TIN_STATS_WAY_MISSES, + TCA_CAKE_TIN_STATS_WAY_COLLISIONS, + TCA_CAKE_TIN_STATS_PEAK_DELAY_US, + TCA_CAKE_TIN_STATS_AVG_DELAY_US, + TCA_CAKE_TIN_STATS_BASE_DELAY_US, + TCA_CAKE_TIN_STATS_SPARSE_FLOWS, + TCA_CAKE_TIN_STATS_BULK_FLOWS, + TCA_CAKE_TIN_STATS_UNRESPONSIVE_FLOWS, + TCA_CAKE_TIN_STATS_MAX_SKBLEN, + TCA_CAKE_TIN_STATS_FLOW_QUANTUM, + __TCA_CAKE_TIN_STATS_MAX +}; +#define TCA_CAKE_TIN_STATS_MAX (__TCA_CAKE_TIN_STATS_MAX - 1) +#define TC_CAKE_MAX_TINS (8) + +enum { + CAKE_FLOW_NONE = 0, + CAKE_FLOW_SRC_IP, + CAKE_FLOW_DST_IP, + CAKE_FLOW_HOSTS, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_DST_IP */ + CAKE_FLOW_FLOWS, + CAKE_FLOW_DUAL_SRC, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_DUAL_DST, /* = CAKE_FLOW_DST_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_TRIPLE, /* = CAKE_FLOW_HOSTS | CAKE_FLOW_FLOWS */ + CAKE_FLOW_MAX, +}; + +enum { + CAKE_DIFFSERV_DIFFSERV3 = 0, + CAKE_DIFFSERV_DIFFSERV4, + CAKE_DIFFSERV_DIFFSERV8, + CAKE_DIFFSERV_BESTEFFORT, + CAKE_DIFFSERV_PRECEDENCE, + CAKE_DIFFSERV_MAX +}; + +enum { + CAKE_ACK_NONE = 0, + CAKE_ACK_FILTER, + CAKE_ACK_AGGRESSIVE, + CAKE_ACK_MAX +}; + +enum { + CAKE_ATM_NONE = 0, + CAKE_ATM_ATM, + CAKE_ATM_PTM, + CAKE_ATM_MAX +}; + + +/* TAPRIO */ +enum { + TC_TAPRIO_CMD_SET_GATES = 0x00, + TC_TAPRIO_CMD_SET_AND_HOLD = 0x01, + TC_TAPRIO_CMD_SET_AND_RELEASE = 0x02, +}; + +enum { + TCA_TAPRIO_SCHED_ENTRY_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_CMD, /* u8 */ + TCA_TAPRIO_SCHED_ENTRY_GATE_MASK, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_INTERVAL, /* u32 */ + __TCA_TAPRIO_SCHED_ENTRY_MAX, +}; +#define TCA_TAPRIO_SCHED_ENTRY_MAX (__TCA_TAPRIO_SCHED_ENTRY_MAX - 1) + +/* The format for schedule entry list is: + * [TCA_TAPRIO_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_SCHED_ENTRY] + * [TCA_TAPRIO_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_SCHED_ENTRY_INTERVAL] + */ +enum { + TCA_TAPRIO_SCHED_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY, + __TCA_TAPRIO_SCHED_MAX, +}; + +#define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1) + +enum { + TCA_TAPRIO_ATTR_UNSPEC, + TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ + TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST, /* nested of entry */ + TCA_TAPRIO_ATTR_SCHED_BASE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY, /* single entry */ + TCA_TAPRIO_ATTR_SCHED_CLOCKID, /* s32 */ + TCA_TAPRIO_PAD, + __TCA_TAPRIO_ATTR_MAX, +}; + +#define TCA_TAPRIO_ATTR_MAX (__TCA_TAPRIO_ATTR_MAX - 1) + +#endif
From: Cong Wang xiyou.wangcong@gmail.com
[ Upstream commit e8c8b53ccaff568fef4c13a6ccaf08bf241aa01a ]
When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, we have a switch which pads non-zero octets, this causes kernel hardware checksum fault repeatedly.
Prior to: commit '88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE ...")' skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated, like what we do for RXFCS. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it is not worthy the effort as the packets are so small that CHECKSUM_COMPLETE can't save anything.
Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), Cc: Eric Dumazet edumazet@google.com Cc: Tariq Toukan tariqt@mellanox.com Cc: Nikola Ciprich nikola.ciprich@linuxbox.cz Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 0b5ef6d4e815..7185f0dd58eb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -732,6 +732,8 @@ static u8 get_ip_proto(struct sk_buff *skb, int network_depth, __be16 proto) ((struct ipv6hdr *)ip_p)->nexthdr; }
+#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN) + static inline void mlx5e_handle_csum(struct net_device *netdev, struct mlx5_cqe64 *cqe, struct mlx5e_rq *rq, @@ -754,6 +756,17 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (unlikely(test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state))) goto csum_unnecessary;
+ /* CQE csum doesn't cover padding octets in short ethernet + * frames. And the pad field is appended prior to calculating + * and appending the FCS field. + * + * Detecting these padded frames requires to verify and parse + * IP headers, so we simply force all those small frames to be + * CHECKSUM_UNNECESSARY even if they are not padded. + */ + if (short_frame(skb->len)) + goto csum_unnecessary; + if (likely(is_last_ethertype_ip(skb, &network_depth, &proto))) { if (unlikely(get_ip_proto(skb, network_depth, proto) == IPPROTO_SCTP)) goto csum_unnecessary;
From: Tariq Toukan tariqt@mellanox.com
[ Upstream commit 7fdc1adc52d3975740547a78c2df329bb207f15d ]
For representors, the TX dropped counter is not folded from the per-ring counters. Fix it.
Signed-off-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 820fe85100b0..4dccc84fdcf2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -143,6 +143,7 @@ static void mlx5e_rep_update_sw_counters(struct mlx5e_priv *priv)
s->tx_packets += sq_stats->packets; s->tx_bytes += sq_stats->bytes; + s->tx_queue_dropped += sq_stats->dropped; } } }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 7afa81c55fca0cad589722cb4bce698b4803b0e1 ]
A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file.
drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated.
This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage.
Link: https://github.com/ClangBuiltLinux/linux/issues/309 Suggested-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/avm/b1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c index 4ac378e48902..40ca1e8fa09f 100644 --- a/drivers/isdn/hardware/avm/b1.c +++ b/drivers/isdn/hardware/avm/b1.c @@ -423,7 +423,7 @@ void b1_parse_version(avmctrl_info *cinfo) int i, j;
for (j = 0; j < AVM_MAXVERSION; j++) - cinfo->version[j] = "\0\0" + 1; + cinfo->version[j] = ""; for (i = 0, j = 0; j < AVM_MAXVERSION && i < cinfo->versionlen; j++, i += cinfo->versionbuf[i] + 1)
linux-stable-mirror@lists.linaro.org