From: Tomer Tayar Tomer.Tayar@cavium.com
[ Upstream commit f00d25f3154b676fcea4502a25b94bd7f142ca74 ]
The MFW might be reset and re-update its shared memory. Upon the detection of such a reset the driver rereads this memory, but it has to wait till the data is valid. This patch adds the missing wait for a data ready indication.
Signed-off-by: Tomer Tayar Tomer.Tayar@cavium.com Signed-off-by: Ariel Elior Ariel.Elior@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 50 +++++++++++++++++++---- 1 file changed, 41 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 3c469355f5a4..9348d367cfdf 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -182,18 +182,57 @@ int qed_mcp_free(struct qed_hwfn *p_hwfn) return 0; }
+/* Maximum of 1 sec to wait for the SHMEM ready indication */ +#define QED_MCP_SHMEM_RDY_MAX_RETRIES 20 +#define QED_MCP_SHMEM_RDY_ITER_MS 50 + static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { struct qed_mcp_info *p_info = p_hwfn->mcp_info; + u8 cnt = QED_MCP_SHMEM_RDY_MAX_RETRIES; + u8 msec = QED_MCP_SHMEM_RDY_ITER_MS; u32 drv_mb_offsize, mfw_mb_offsize; u32 mcp_pf_id = MCP_PF_ID(p_hwfn);
p_info->public_base = qed_rd(p_hwfn, p_ptt, MISC_REG_SHARED_MEM_ADDR); - if (!p_info->public_base) - return 0; + if (!p_info->public_base) { + DP_NOTICE(p_hwfn, + "The address of the MCP scratch-pad is not configured\n"); + return -EINVAL; + }
p_info->public_base |= GRCBASE_MCP;
+ /* Get the MFW MB address and number of supported messages */ + mfw_mb_offsize = qed_rd(p_hwfn, p_ptt, + SECTION_OFFSIZE_ADDR(p_info->public_base, + PUBLIC_MFW_MB)); + p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id); + p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, + p_info->mfw_mb_addr + + offsetof(struct public_mfw_mb, + sup_msgs)); + + /* The driver can notify that there was an MCP reset, and might read the + * SHMEM values before the MFW has completed initializing them. + * To avoid this, the "sup_msgs" field in the MFW mailbox is used as a + * data ready indication. + */ + while (!p_info->mfw_mb_length && --cnt) { + msleep(msec); + p_info->mfw_mb_length = + (u16)qed_rd(p_hwfn, p_ptt, + p_info->mfw_mb_addr + + offsetof(struct public_mfw_mb, sup_msgs)); + } + + if (!cnt) { + DP_NOTICE(p_hwfn, + "Failed to get the SHMEM ready notification after %d msec\n", + QED_MCP_SHMEM_RDY_MAX_RETRIES * msec); + return -EBUSY; + } + /* Calculate the driver and MFW mailbox address */ drv_mb_offsize = qed_rd(p_hwfn, p_ptt, SECTION_OFFSIZE_ADDR(p_info->public_base, @@ -203,13 +242,6 @@ static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) "drv_mb_offsiz = 0x%x, drv_mb_addr = 0x%x mcp_pf_id = 0x%x\n", drv_mb_offsize, p_info->drv_mb_addr, mcp_pf_id);
- /* Set the MFW MB address */ - mfw_mb_offsize = qed_rd(p_hwfn, p_ptt, - SECTION_OFFSIZE_ADDR(p_info->public_base, - PUBLIC_MFW_MB)); - p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id); - p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, p_info->mfw_mb_addr); - /* Get the current driver mailbox sequence before sending * the first command */
From: Tomer Tayar Tomer.Tayar@cavium.com
[ Upstream commit 76271809f49056f079e202bf6513d17b0d6dd34d ]
Successive iterations of halting and resuming the management chip (MCP) might fail, since currently the driver doesn't wait for these operations to actually take place. This patch prevents the driver from moving forward before the operations are reflected in the state register.
Signed-off-by: Tomer Tayar Tomer.Tayar@cavium.com Signed-off-by: Ariel Elior Ariel.Elior@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 46 +++++++++++++++---- .../net/ethernet/qlogic/qed/qed_reg_addr.h | 1 + 2 files changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 9348d367cfdf..5748bcb26d40 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1998,31 +1998,61 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn, return rc; }
+/* A maximal 100 msec waiting time for the MCP to halt */ +#define QED_MCP_HALT_SLEEP_MS 10 +#define QED_MCP_HALT_MAX_RETRIES 10 + int qed_mcp_halt(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { - u32 resp = 0, param = 0; + u32 resp = 0, param = 0, cpu_state, cnt = 0; int rc;
rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_MCP_HALT, 0, &resp, ¶m); - if (rc) + if (rc) { DP_ERR(p_hwfn, "MCP response failure, aborting\n"); + return rc; + }
- return rc; + do { + msleep(QED_MCP_HALT_SLEEP_MS); + cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE); + if (cpu_state & MCP_REG_CPU_STATE_SOFT_HALTED) + break; + } while (++cnt < QED_MCP_HALT_MAX_RETRIES); + + if (cnt == QED_MCP_HALT_MAX_RETRIES) { + DP_NOTICE(p_hwfn, + "Failed to halt the MCP [CPU_MODE = 0x%08x, CPU_STATE = 0x%08x]\n", + qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE), cpu_state); + return -EBUSY; + } + + return 0; }
+#define QED_MCP_RESUME_SLEEP_MS 10 + int qed_mcp_resume(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { - u32 value, cpu_mode; + u32 cpu_mode, cpu_state;
qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_STATE, 0xffffffff);
- value = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE); - value &= ~MCP_REG_CPU_MODE_SOFT_HALT; - qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_MODE, value); cpu_mode = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE); + cpu_mode &= ~MCP_REG_CPU_MODE_SOFT_HALT; + qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_MODE, cpu_mode); + msleep(QED_MCP_RESUME_SLEEP_MS); + cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
- return (cpu_mode & MCP_REG_CPU_MODE_SOFT_HALT) ? -EAGAIN : 0; + if (cpu_state & MCP_REG_CPU_STATE_SOFT_HALTED) { + DP_NOTICE(p_hwfn, + "Failed to resume the MCP [CPU_MODE = 0x%08x, CPU_STATE = 0x%08x]\n", + cpu_mode, cpu_state); + return -EBUSY; + } + + return 0; }
int qed_mcp_ov_update_current_config(struct qed_hwfn *p_hwfn, diff --git a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h index 0cdb4337b3a0..887cfb16b53e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h +++ b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h @@ -554,6 +554,7 @@ 0 #define MCP_REG_CPU_STATE \ 0xe05004UL +#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1UL << 10) #define MCP_REG_CPU_EVENT_MASK \ 0xe05008UL #define PGLUE_B_REG_PF_BAR0_SIZE \
From: Tomer Tayar Tomer.Tayar@cavium.com
[ Upstream commit eaa50fc59e5841910987e90b0438b2643041f508 ]
The MFW manages an internal lock to prevent concurrent hardware (de)initialization of different PFs. This, together with the busy-waiting for the MFW's responses for commands, might lead to a deadlock during concurrent load or unload of PFs. This patch adds the option to sleep within the busy-waiting, and uses it for the (un)load requests (which are not sent from an interrupt context) to prevent the possible deadlock.
Signed-off-by: Tomer Tayar Tomer.Tayar@cavium.com Signed-off-by: Ariel Elior Ariel.Elior@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 43 ++++++++++++++++------- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 21 ++++++----- 2 files changed, 44 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 5748bcb26d40..a1e1092fa3ce 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -47,7 +47,7 @@ #include "qed_reg_addr.h" #include "qed_sriov.h"
-#define CHIP_MCP_RESP_ITER_US 10 +#define QED_MCP_RESP_ITER_US 10
#define QED_DRV_MB_MAX_RETRIES (500 * 1000) /* Account for 5 sec */ #define QED_MCP_RESET_RETRIES (50 * 1000) /* Account for 500 msec */ @@ -316,7 +316,7 @@ static void qed_mcp_reread_offsets(struct qed_hwfn *p_hwfn,
int qed_mcp_reset(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { - u32 org_mcp_reset_seq, seq, delay = CHIP_MCP_RESP_ITER_US, cnt = 0; + u32 org_mcp_reset_seq, seq, delay = QED_MCP_RESP_ITER_US, cnt = 0; int rc = 0;
/* Ensure that only a single thread is accessing the mailbox */ @@ -448,10 +448,10 @@ static int _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, struct qed_mcp_mb_params *p_mb_params, - u32 max_retries, u32 delay) + u32 max_retries, u32 usecs) { + u32 cnt = 0, msecs = DIV_ROUND_UP(usecs, 1000); struct qed_mcp_cmd_elem *p_cmd_elem; - u32 cnt = 0; u16 seq_num; int rc = 0;
@@ -474,7 +474,11 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, goto err;
spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock); - udelay(delay); + + if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP)) + msleep(msecs); + else + udelay(usecs); } while (++cnt < max_retries);
if (cnt >= max_retries) { @@ -503,7 +507,11 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, * The spinlock stays locked until the list element is removed. */
- udelay(delay); + if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP)) + msleep(msecs); + else + udelay(usecs); + spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
if (p_cmd_elem->b_is_completed) @@ -538,7 +546,7 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, "MFW mailbox: response 0x%08x param 0x%08x [after %d.%03d ms]\n", p_mb_params->mcp_resp, p_mb_params->mcp_param, - (cnt * delay) / 1000, (cnt * delay) % 1000); + (cnt * usecs) / 1000, (cnt * usecs) % 1000);
/* Clear the sequence number from the MFW response */ p_mb_params->mcp_resp &= FW_MSG_CODE_MASK; @@ -556,7 +564,7 @@ static int qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, { size_t union_data_size = sizeof(union drv_union_data); u32 max_retries = QED_DRV_MB_MAX_RETRIES; - u32 delay = CHIP_MCP_RESP_ITER_US; + u32 usecs = QED_MCP_RESP_ITER_US;
/* MCP not initialized */ if (!qed_mcp_is_init(p_hwfn)) { @@ -573,8 +581,13 @@ static int qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, return -EINVAL; }
+ if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP)) { + max_retries = DIV_ROUND_UP(max_retries, 1000); + usecs *= 1000; + } + return _qed_mcp_cmd_and_union(p_hwfn, p_ptt, p_mb_params, max_retries, - delay); + usecs); }
int qed_mcp_cmd(struct qed_hwfn *p_hwfn, @@ -763,6 +776,7 @@ __qed_mcp_load_req(struct qed_hwfn *p_hwfn, mb_params.data_src_size = sizeof(load_req); mb_params.p_data_dst = &load_rsp; mb_params.data_dst_size = sizeof(load_rsp); + mb_params.flags = QED_MB_FLAG_CAN_SLEEP;
DP_VERBOSE(p_hwfn, QED_MSG_SP, "Load Request: param 0x%08x [init_hw %d, drv_type %d, hsi_ver %d, pda 0x%04x]\n", @@ -984,7 +998,8 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn,
int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { - u32 wol_param, mcp_resp, mcp_param; + struct qed_mcp_mb_params mb_params; + u32 wol_param;
switch (p_hwfn->cdev->wol_config) { case QED_OV_WOL_DISABLED: @@ -1002,8 +1017,12 @@ int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) wol_param = DRV_MB_PARAM_UNLOAD_WOL_MCP; }
- return qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_UNLOAD_REQ, wol_param, - &mcp_resp, &mcp_param); + memset(&mb_params, 0, sizeof(mb_params)); + mb_params.cmd = DRV_MSG_CODE_UNLOAD_REQ; + mb_params.param = wol_param; + mb_params.flags = QED_MB_FLAG_CAN_SLEEP; + + return qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params); }
int qed_mcp_unload_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h index c7ec2395d1ce..e5d0483f3c44 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h @@ -565,14 +565,19 @@ struct qed_mcp_info { };
struct qed_mcp_mb_params { - u32 cmd; - u32 param; - void *p_data_src; - u8 data_src_size; - void *p_data_dst; - u8 data_dst_size; - u32 mcp_resp; - u32 mcp_param; + u32 cmd; + u32 param; + void *p_data_src; + void *p_data_dst; + u8 data_src_size; + u8 data_dst_size; + u32 mcp_resp; + u32 mcp_param; + u32 flags; +#define QED_MB_FLAG_CAN_SLEEP (0x1 << 0) +#define QED_MB_FLAGS_IS_SET(params, flag) \ + ({ typeof(params) __params = (params); \ + (__params && (__params->flags & QED_MB_FLAG_ ## flag)); }) };
/**
From: Anson Huang Anson.Huang@nxp.com
[ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ]
When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled.
Signed-off-by: Anson Huang Anson.Huang@nxp.com Signed-off-by: Eduardo Valentin edubezval@gmail.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/thermal/of-thermal.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index d04ec3b9e5ff..8a70b57d129c 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -278,10 +278,13 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
mutex_lock(&tz->lock);
- if (mode == THERMAL_DEVICE_ENABLED) + if (mode == THERMAL_DEVICE_ENABLED) { tz->polling_delay = data->polling_delay; - else + tz->passive_delay = data->passive_delay; + } else { tz->polling_delay = 0; + tz->passive_delay = 0; + }
mutex_unlock(&tz->lock);
From: Tomer Tayar Tomer.Tayar@cavium.com
[ Upstream commit b310974e041913231b6e3d5d475d4df55c312301 ]
Keep sending mailbox commands to the MFW when it is not responsive ends up with a redundant amount of timeout expiries. This patch prints the MCP status on the first command which is not responded, and blocks the following commands. Since the (un)load request commands might be not responded due to other PFs, the patch also adds the option to skip the blocking upon a failure.
Signed-off-by: Tomer Tayar Tomer.Tayar@cavium.com Signed-off-by: Ariel Elior Ariel.Elior@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 52 ++++++++++++++++++- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 6 ++- .../net/ethernet/qlogic/qed/qed_reg_addr.h | 1 + 3 files changed, 56 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index a1e1092fa3ce..7938abe9a301 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -319,6 +319,12 @@ int qed_mcp_reset(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) u32 org_mcp_reset_seq, seq, delay = QED_MCP_RESP_ITER_US, cnt = 0; int rc = 0;
+ if (p_hwfn->mcp_info->b_block_cmd) { + DP_NOTICE(p_hwfn, + "The MFW is not responsive. Avoid sending MCP_RESET mailbox command.\n"); + return -EBUSY; + } + /* Ensure that only a single thread is accessing the mailbox */ spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
@@ -444,6 +450,33 @@ static void __qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, (p_mb_params->cmd | seq_num), p_mb_params->param); }
+static void qed_mcp_cmd_set_blocking(struct qed_hwfn *p_hwfn, bool block_cmd) +{ + p_hwfn->mcp_info->b_block_cmd = block_cmd; + + DP_INFO(p_hwfn, "%s sending of mailbox commands to the MFW\n", + block_cmd ? "Block" : "Unblock"); +} + +static void qed_mcp_print_cpu_info(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt) +{ + u32 cpu_mode, cpu_state, cpu_pc_0, cpu_pc_1, cpu_pc_2; + u32 delay = QED_MCP_RESP_ITER_US; + + cpu_mode = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE); + cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE); + cpu_pc_0 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER); + udelay(delay); + cpu_pc_1 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER); + udelay(delay); + cpu_pc_2 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER); + + DP_NOTICE(p_hwfn, + "MCP CPU info: mode 0x%08x, state 0x%08x, pc {0x%08x, 0x%08x, 0x%08x}\n", + cpu_mode, cpu_state, cpu_pc_0, cpu_pc_1, cpu_pc_2); +} + static int _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, @@ -530,11 +563,15 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, DP_NOTICE(p_hwfn, "The MFW failed to respond to command 0x%08x [param 0x%08x].\n", p_mb_params->cmd, p_mb_params->param); + qed_mcp_print_cpu_info(p_hwfn, p_ptt);
spin_lock_bh(&p_hwfn->mcp_info->cmd_lock); qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem); spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
+ if (!QED_MB_FLAGS_IS_SET(p_mb_params, AVOID_BLOCK)) + qed_mcp_cmd_set_blocking(p_hwfn, true); + return -EAGAIN; }
@@ -572,6 +609,13 @@ static int qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn, return -EBUSY; }
+ if (p_hwfn->mcp_info->b_block_cmd) { + DP_NOTICE(p_hwfn, + "The MFW is not responsive. Avoid sending mailbox command 0x%08x [param 0x%08x].\n", + p_mb_params->cmd, p_mb_params->param); + return -EBUSY; + } + if (p_mb_params->data_src_size > union_data_size || p_mb_params->data_dst_size > union_data_size) { DP_ERR(p_hwfn, @@ -776,7 +820,7 @@ __qed_mcp_load_req(struct qed_hwfn *p_hwfn, mb_params.data_src_size = sizeof(load_req); mb_params.p_data_dst = &load_rsp; mb_params.data_dst_size = sizeof(load_rsp); - mb_params.flags = QED_MB_FLAG_CAN_SLEEP; + mb_params.flags = QED_MB_FLAG_CAN_SLEEP | QED_MB_FLAG_AVOID_BLOCK;
DP_VERBOSE(p_hwfn, QED_MSG_SP, "Load Request: param 0x%08x [init_hw %d, drv_type %d, hsi_ver %d, pda 0x%04x]\n", @@ -1020,7 +1064,7 @@ int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) memset(&mb_params, 0, sizeof(mb_params)); mb_params.cmd = DRV_MSG_CODE_UNLOAD_REQ; mb_params.param = wol_param; - mb_params.flags = QED_MB_FLAG_CAN_SLEEP; + mb_params.flags = QED_MB_FLAG_CAN_SLEEP | QED_MB_FLAG_AVOID_BLOCK;
return qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params); } @@ -2047,6 +2091,8 @@ int qed_mcp_halt(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) return -EBUSY; }
+ qed_mcp_cmd_set_blocking(p_hwfn, true); + return 0; }
@@ -2071,6 +2117,8 @@ int qed_mcp_resume(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) return -EBUSY; }
+ qed_mcp_cmd_set_blocking(p_hwfn, false); + return 0; }
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h index e5d0483f3c44..f1fe5e3427ea 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h @@ -540,11 +540,14 @@ struct qed_mcp_info { */ spinlock_t cmd_lock;
+ /* Flag to indicate whether sending a MFW mailbox command is blocked */ + bool b_block_cmd; + /* Spinlock used for syncing SW link-changes and link-changes * originating from attention context. */ spinlock_t link_lock; - bool block_mb_sending; + u32 public_base; u32 drv_mb_addr; u32 mfw_mb_addr; @@ -575,6 +578,7 @@ struct qed_mcp_mb_params { u32 mcp_param; u32 flags; #define QED_MB_FLAG_CAN_SLEEP (0x1 << 0) +#define QED_MB_FLAG_AVOID_BLOCK (0x1 << 1) #define QED_MB_FLAGS_IS_SET(params, flag) \ ({ typeof(params) __params = (params); \ (__params && (__params->flags & QED_MB_FLAG_ ## flag)); }) diff --git a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h index 887cfb16b53e..d1201bb2d4bb 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h +++ b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h @@ -557,6 +557,7 @@ #define MCP_REG_CPU_STATE_SOFT_HALTED (0x1UL << 10) #define MCP_REG_CPU_EVENT_MASK \ 0xe05008UL +#define MCP_REG_CPU_PROGRAM_COUNTER 0xe0501cUL #define PGLUE_B_REG_PF_BAR0_SIZE \ 0x2aae60UL #define PGLUE_B_REG_PF_BAR1_SIZE \
From: Eric Sandeen sandeen@redhat.com
[ Upstream commit 09a4e0be5826aa66c4ce9954841f110ffe63ef4f ]
The largest block size supported by isofs is ISOFS_BLOCK_SIZE (2048), but isofs_fill_super calls sb_min_blocksize and sets the blocksize to the device's logical block size if it's larger than what we ended up with after option parsing.
If for some reason we try to mount a hard 4k device as an isofs filesystem, we'll set opt.blocksize to 4096, and when we try to read the superblock we found via:
block = iso_blknum << (ISOFS_BLOCK_BITS - s->s_blocksize_bits)
with s_blocksize_bits greater than ISOFS_BLOCK_BITS, we'll have a negative shift and the bread will fail somewhat cryptically:
isofs_fill_super: bread failed, dev=sda, iso_blknum=17, block=-2147483648
It seems best to just catch and clearly reject mounts of such a device.
Reported-by: Bryan Gurney bgurney@redhat.com Signed-off-by: Eric Sandeen sandeen@redhat.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- fs/isofs/inode.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c index ed4edcd2bc56..a4994e25e19e 100644 --- a/fs/isofs/inode.c +++ b/fs/isofs/inode.c @@ -24,6 +24,7 @@ #include <linux/mpage.h> #include <linux/user_namespace.h> #include <linux/seq_file.h> +#include <linux/blkdev.h>
#include "isofs.h" #include "zisofs.h" @@ -653,6 +654,12 @@ static int isofs_fill_super(struct super_block *s, void *data, int silent) /* * What if bugger tells us to go beyond page size? */ + if (bdev_logical_block_size(s->s_bdev) > 2048) { + printk(KERN_WARNING + "ISOFS: unsupported/invalid hardware sector size %d\n", + bdev_logical_block_size(s->s_bdev)); + goto out_freesbi; + } opt.blocksize = sb_min_blocksize(s, opt.blocksize);
sbi->s_high_sierra = 0; /* default is iso9660 */
From: John Fastabend john.fastabend@gmail.com
[ Upstream commit 67db7cd249e71f64346f481b629724376d063e08 ]
Currently, the lower protocols sk_write_space handler is not called if TLS is sending a scatterlist via tls_push_sg. However, normally tls_push_sg calls do_tcp_sendpage, which may be under memory pressure, that in turn may trigger a wait via sk_wait_event. Typically, this happens when the in-flight bytes exceed the sdnbuf size. In the normal case when enough ACKs are received sk_write_space() will be called and the sk_wait_event will be woken up allowing it to send more data and/or return to the user.
But, in the TLS case because the sk_write_space() handler does not wake up the events the above send will wait until the sndtimeo is exceeded. By default this is MAX_SCHEDULE_TIMEOUT so it look like a hang to the user (especially this impatient user). To fix this pass the sk_write_space event to the lower layers sk_write_space event which in the TCP case will wake any pending events.
I observed the above while integrating sockmap and ktls. It initially appeared as test_sockmap (modified to use ktls) occasionally hanging. To reliably reproduce this reduce the sndbuf size and stress the tls layer by sending many 1B sends. This results in every byte needing a header and each byte individually being sent to the crypto layer.
Signed-off-by: John Fastabend john.fastabend@gmail.com Acked-by: Dave Watson davejwatson@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/tls/tls_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 055b9992d8c7..fa011318ffe4 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -195,9 +195,14 @@ static void tls_write_space(struct sock *sk) { struct tls_context *ctx = tls_get_ctx(sk);
- /* We are already sending pages, ignore notification */ - if (ctx->in_tcp_sendpages) + /* If in_tcp_sendpages call lower protocol write space handler + * to ensure we wake up any waiting operations there. For example + * if do_tcp_sendpages where to call sk_wait_event. + */ + if (ctx->in_tcp_sendpages) { + ctx->sk_write_space(sk); return; + }
if (!sk->sk_write_pending && tls_is_pending_closed_record(ctx)) { gfp_t sk_allocation = sk->sk_allocation;
From: Huazhong Tan tanhuazhong@huawei.com
[ Upstream commit 3ed614dce3ca9912d22be215ff0f11104b69fe62 ]
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE is 65536(64K). But the type of length and page_offset are u16, they will overflow. So change them to u32.
Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Huazhong Tan tanhuazhong@huawei.com Signed-off-by: Salil Mehta salil.mehta@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/hisilicon/hns/hnae.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.h b/drivers/net/ethernet/hisilicon/hns/hnae.h index fa5b30f547f6..cad52bd331f7 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.h +++ b/drivers/net/ethernet/hisilicon/hns/hnae.h @@ -220,10 +220,10 @@ struct hnae_desc_cb {
/* priv data for the desc, e.g. skb when use with ip stack*/ void *priv; - u16 page_offset; - u16 reuse_flag; + u32 page_offset; + u32 length; /* length of the buffer */
- u16 length; /* length of the buffer */ + u16 reuse_flag;
/* desc type, used by the ring user to mark the type of the priv data */ u16 type;
From: John Fastabend john.fastabend@gmail.com
[ Upstream commit 9b2e0388bec8ec5427403e23faff3b58dd1c3200 ]
When sockmap code is using the stream parser it also handles the write space events in order to handle the case where (a) verdict redirects skb to another socket and (b) the sockmap then sends the skb but due to memory constraints (or other EAGAIN errors) needs to do a retry.
But the initial code missed a third case where the skb_send_sock_locked() triggers an sk_wait_event(). A typically case would be when sndbuf size is exceeded. If this happens because we do not pass the write_space event to the lower layers we never wake up the event and it will wait for sndtimeo. Which as noted in ktls fix may be rather large and look like a hang to the user.
To reproduce the best test is to reduce the sndbuf size and send 1B data chunks to stress the memory handling. To fix this pass the event from the upper layer to the lower layer.
Signed-off-by: John Fastabend john.fastabend@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- kernel/bpf/sockmap.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 53a4787c08d8..20eaddfa691c 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -313,12 +313,15 @@ static void smap_tx_work(struct work_struct *w) static void smap_write_space(struct sock *sk) { struct smap_psock *psock; + void (*write_space)(struct sock *sk);
rcu_read_lock(); psock = smap_psock_sk(sk); if (likely(psock && test_bit(SMAP_TX_RUNNING, &psock->state))) schedule_work(&psock->tx_work); + write_space = psock->save_write_space; rcu_read_unlock(); + write_space(sk); }
static void smap_stop_sock(struct smap_psock *psock, struct sock *sk)
From: Huazhong Tan tanhuazhong@huawei.com
[ Upstream commit b1ccd4c0ab6ef499f47dd84ed4920502a7147bba ]
skb->truesize is not meant to be tracking amount of used bytes in a skb, but amount of reserved/consumed bytes in memory.
For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment.
So skb_add_rx_frag needs to calculate the length of the entire buffer into turesize.
Fixes: 9cbe9fd5214e ("net: hns: optimize XGE capability by reducing cpu usage") Signed-off-by: Huazhong tan tanhuazhong@huawei.com Signed-off-by: Salil Mehta salil.mehta@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index e77192683dba..25a9732afc84 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -530,7 +530,7 @@ static void hns_nic_reuse_page(struct sk_buff *skb, int i, }
skb_add_rx_frag(skb, i, desc_cb->priv, desc_cb->page_offset + pull_len, - size - pull_len, truesize - pull_len); + size - pull_len, truesize);
/* avoid re-using remote pages,flag default unreuse */ if (unlikely(page_to_nid(desc_cb->priv) != numa_node_id()))
From: Bo Chen chenbo@pdx.edu
[ Upstream commit cf1acec008f8d7761aa3fd7c4bca7e17b2d2512d ]
When the device is not up, the call to 'e1000_up()' from the error handling path of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer dereference. The null-pointer dereference is triggered in function 'e1000_alloc_rx_buffers()' at line 'buffer_info = &rx_ring->buffer_info[i]'.
This bug was reported by COD, a tool for testing kernel module binaries I am building. This bug was also detected by KFI from Dr. Kai Cong.
This patch fixes the bug by checking on 'netif_running()' before calling 'e1000_up()' in 'e1000_set_ringparam()'.
Signed-off-by: Bo Chen chenbo@pdx.edu Acked-by: Alexander Duyck alexander.h.duyck@intel.com Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 3b3983a1ffbb..d44d3643677d 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -664,7 +664,8 @@ static int e1000_set_ringparam(struct net_device *netdev, err_alloc_rx: kfree(txdr); err_alloc_tx: - e1000_up(adapter); + if (netif_running(adapter->netdev)) + e1000_up(adapter); err_setup: clear_bit(__E1000_RESETTING, &adapter->flags); return err;
From: Bo Chen chenbo@pdx.edu
[ Upstream commit ee400a3f1bfe7004a3e14b81c38ccc5583c26295 ]
In 'e1000_set_ringparam()', the tx_ring and rx_ring are updated with new value and the old tx/rx rings are freed only when the device is up. There are resource leaks on old tx/rx rings when the device is not up. This bug is reported by COD, a tool for testing kernel module binaries I am building.
This patch fixes the bug by always calling 'kfree()' on old tx/rx rings in 'e1000_set_ringparam()'.
Signed-off-by: Bo Chen chenbo@pdx.edu Reviewed-by: Alexander Duyck alexander.h.duyck@intel.com Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index d44d3643677d..10df2d60c181 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -644,14 +644,14 @@ static int e1000_set_ringparam(struct net_device *netdev, adapter->tx_ring = tx_old; e1000_free_all_rx_resources(adapter); e1000_free_all_tx_resources(adapter); - kfree(tx_old); - kfree(rx_old); adapter->rx_ring = rxdr; adapter->tx_ring = txdr; err = e1000_up(adapter); if (err) goto err_setup; } + kfree(tx_old); + kfree(rx_old);
clear_bit(__E1000_RESETTING, &adapter->flags); return 0;
From: Srikanth Jampala Jampala.Srikanth@cavium.com
[ Upstream commit 3d7c82060d1fe65bde4023aac41a0b1bd7718e07 ]
Earlier used to post the current command without checking queue full after backlog submissions. So, post the current command only after confirming the space in queue after backlog submissions.
Maintain host write index instead of reading device registers to get the next free slot to post the command.
Return -ENOSPC in queue full case.
Signed-off-by: Srikanth Jampala Jampala.Srikanth@cavium.com Reviewed-by: Gadam Sreerama sgadam@cavium.com Tested-by: Jha, Chandan Chandan.Jha@cavium.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/crypto/cavium/nitrox/nitrox_dev.h | 3 +- drivers/crypto/cavium/nitrox/nitrox_lib.c | 1 + drivers/crypto/cavium/nitrox/nitrox_reqmgr.c | 57 +++++++++++--------- 3 files changed, 35 insertions(+), 26 deletions(-)
diff --git a/drivers/crypto/cavium/nitrox/nitrox_dev.h b/drivers/crypto/cavium/nitrox/nitrox_dev.h index 9a476bb6d4c7..af596455b420 100644 --- a/drivers/crypto/cavium/nitrox/nitrox_dev.h +++ b/drivers/crypto/cavium/nitrox/nitrox_dev.h @@ -35,6 +35,7 @@ struct nitrox_cmdq { /* requests in backlog queues */ atomic_t backlog_count;
+ int write_idx; /* command size 32B/64B */ u8 instr_size; u8 qno; @@ -87,7 +88,7 @@ struct nitrox_bh { struct bh_data *slc; };
-/* NITROX-5 driver state */ +/* NITROX-V driver state */ #define NITROX_UCODE_LOADED 0 #define NITROX_READY 1
diff --git a/drivers/crypto/cavium/nitrox/nitrox_lib.c b/drivers/crypto/cavium/nitrox/nitrox_lib.c index 4fdc921ba611..9906c0086647 100644 --- a/drivers/crypto/cavium/nitrox/nitrox_lib.c +++ b/drivers/crypto/cavium/nitrox/nitrox_lib.c @@ -36,6 +36,7 @@ static int cmdq_common_init(struct nitrox_cmdq *cmdq) cmdq->head = PTR_ALIGN(cmdq->head_unaligned, PKT_IN_ALIGN); cmdq->dma = PTR_ALIGN(cmdq->dma_unaligned, PKT_IN_ALIGN); cmdq->qsize = (qsize + PKT_IN_ALIGN); + cmdq->write_idx = 0;
spin_lock_init(&cmdq->response_lock); spin_lock_init(&cmdq->cmdq_lock); diff --git a/drivers/crypto/cavium/nitrox/nitrox_reqmgr.c b/drivers/crypto/cavium/nitrox/nitrox_reqmgr.c index 4addc238a6ef..4adf28176a4e 100644 --- a/drivers/crypto/cavium/nitrox/nitrox_reqmgr.c +++ b/drivers/crypto/cavium/nitrox/nitrox_reqmgr.c @@ -43,6 +43,16 @@ * Invalid flag options in AES-CCM IV. */
+static inline int incr_index(int index, int count, int max) +{ + if ((index + count) >= max) + index = index + count - max; + else + index += count; + + return index; +} + /** * dma_free_sglist - unmap and free the sg lists. * @ndev: N5 device @@ -427,30 +437,29 @@ static void post_se_instr(struct nitrox_softreq *sr, struct nitrox_cmdq *cmdq) { struct nitrox_device *ndev = sr->ndev; - union nps_pkt_in_instr_baoff_dbell pkt_in_baoff_dbell; - u64 offset; + int idx; u8 *ent;
spin_lock_bh(&cmdq->cmdq_lock);
- /* get the next write offset */ - offset = NPS_PKT_IN_INSTR_BAOFF_DBELLX(cmdq->qno); - pkt_in_baoff_dbell.value = nitrox_read_csr(ndev, offset); + idx = cmdq->write_idx; /* copy the instruction */ - ent = cmdq->head + pkt_in_baoff_dbell.s.aoff; + ent = cmdq->head + (idx * cmdq->instr_size); memcpy(ent, &sr->instr, cmdq->instr_size); - /* flush the command queue updates */ - dma_wmb();
- sr->tstamp = jiffies; atomic_set(&sr->status, REQ_POSTED); response_list_add(sr, cmdq); + sr->tstamp = jiffies; + /* flush the command queue updates */ + dma_wmb();
/* Ring doorbell with count 1 */ writeq(1, cmdq->dbell_csr_addr); /* orders the doorbell rings */ mmiowb();
+ cmdq->write_idx = incr_index(idx, 1, ndev->qlen); + spin_unlock_bh(&cmdq->cmdq_lock); }
@@ -460,6 +469,9 @@ static int post_backlog_cmds(struct nitrox_cmdq *cmdq) struct nitrox_softreq *sr, *tmp; int ret = 0;
+ if (!atomic_read(&cmdq->backlog_count)) + return 0; + spin_lock_bh(&cmdq->backlog_lock);
list_for_each_entry_safe(sr, tmp, &cmdq->backlog_head, backlog) { @@ -467,7 +479,7 @@ static int post_backlog_cmds(struct nitrox_cmdq *cmdq)
/* submit until space available */ if (unlikely(cmdq_full(cmdq, ndev->qlen))) { - ret = -EBUSY; + ret = -ENOSPC; break; } /* delete from backlog list */ @@ -492,23 +504,20 @@ static int nitrox_enqueue_request(struct nitrox_softreq *sr) { struct nitrox_cmdq *cmdq = sr->cmdq; struct nitrox_device *ndev = sr->ndev; - int ret = -EBUSY; + + /* try to post backlog requests */ + post_backlog_cmds(cmdq);
if (unlikely(cmdq_full(cmdq, ndev->qlen))) { if (!(sr->flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) - return -EAGAIN; - + return -ENOSPC; + /* add to backlog list */ backlog_list_add(sr, cmdq); - } else { - ret = post_backlog_cmds(cmdq); - if (ret) { - backlog_list_add(sr, cmdq); - return ret; - } - post_se_instr(sr, cmdq); - ret = -EINPROGRESS; + return -EBUSY; } - return ret; + post_se_instr(sr, cmdq); + + return -EINPROGRESS; }
/** @@ -625,11 +634,9 @@ int nitrox_process_se_request(struct nitrox_device *ndev, */ sr->instr.fdata[0] = *((u64 *)&req->gph); sr->instr.fdata[1] = 0; - /* flush the soft_req changes before posting the cmd */ - wmb();
ret = nitrox_enqueue_request(sr); - if (ret == -EAGAIN) + if (ret == -ENOSPC) goto send_fail;
return ret;
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit f196dec6d50abb2e65fb54a0621b2f1b4d922995 ]
The adt7475_read_word() function was meant to return negative error codes on failure.
Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Tokunori Ikegami ikegami@allied-telesis.co.jp Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/hwmon/adt7475.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 9ef84998c7f3..37db2eb66ed7 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -303,14 +303,18 @@ static inline u16 volt2reg(int channel, long volt, u8 bypass_attn) return clamp_val(reg, 0, 1023) & (0xff << 2); }
-static u16 adt7475_read_word(struct i2c_client *client, int reg) +static int adt7475_read_word(struct i2c_client *client, int reg) { - u16 val; + int val1, val2;
- val = i2c_smbus_read_byte_data(client, reg); - val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8); + val1 = i2c_smbus_read_byte_data(client, reg); + if (val1 < 0) + return val1; + val2 = i2c_smbus_read_byte_data(client, reg + 1); + if (val2 < 0) + return val2;
- return val; + return val1 | (val2 << 8); }
static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
From: Lothar Felten lothar.felten@gmail.com
[ Upstream commit 3ad867001c91657c46dcf6656d52eb6080286fd5 ]
fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents.
update email address
Signed-off-by: Lothar Felten lothar.felten@gmail.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- Documentation/hwmon/ina2xx | 2 +- drivers/hwmon/ina2xx.c | 13 +++++++++++-- include/linux/platform_data/ina2xx.h | 2 +- 3 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index cfd31d94c872..f8bf14055c2f 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -32,7 +32,7 @@ Supported chips: Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/
-Author: Lothar Felten l-felten@ti.com +Author: Lothar Felten lothar.felten@gmail.com
Description ----------- diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index e9e6aeabbf84..71d3445ba869 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -17,7 +17,7 @@ * Bi-directional Current/Power Monitor with I2C Interface * Datasheet: http://www.ti.com/product/ina230 * - * Copyright (C) 2012 Lothar Felten l-felten@ti.com + * Copyright (C) 2012 Lothar Felten lothar.felten@gmail.com * Thanks to Jan Volkering * * This program is free software; you can redistribute it and/or modify @@ -329,6 +329,15 @@ static int ina2xx_set_shunt(struct ina2xx_data *data, long val) return 0; }
+static ssize_t ina2xx_show_shunt(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct ina2xx_data *data = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%li\n", data->rshunt); +} + static ssize_t ina2xx_store_shunt(struct device *dev, struct device_attribute *da, const char *buf, size_t count) @@ -403,7 +412,7 @@ static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
/* shunt resistance */ static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR, - ina2xx_show_value, ina2xx_store_shunt, + ina2xx_show_shunt, ina2xx_store_shunt, INA2XX_CALIBRATION);
/* update interval (ina226 only) */ diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9abc0ca7259b..9f0aa1b48c78 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -1,7 +1,7 @@ /* * Driver for Texas Instruments INA219, INA226 power monitor chips * - * Copyright (C) 2012 Lothar Felten l-felten@ti.com + * Copyright (C) 2012 Lothar Felten lothar.felten@gmail.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
From: Leonard Crestez leonard.crestez@nxp.com
[ Upstream commit 538d6e9d597584e80514698e24321645debde78f ]
This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d.
That commit followed the reference manual but unfortunately the imx7d manual is incorrect.
Tested with ath9k pcie card and confirmed internally.
Signed-off-by: Leonard Crestez leonard.crestez@nxp.com Acked-by: Lucas Stach l.stach@pengutronix.de Fixes: 1c86c9dd82f8 ("ARM: dts: imx7d: Invert legacy PCI irq mapping") Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/arm/boot/dts/imx7d.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 4d308d17f040..119b63ffb0fe 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -144,10 +144,14 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
From: Rex Zhu Rex.Zhu@amd.com
[ Upstream commit 8ef23364b654d44244400d79988e677e504b21ba ]
This is required by gfx hw and can fix the rlc hang when do s3 stree test on Cz/St.
Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Hang Zhou hang.zhou@amd.com Signed-off-by: Rex Zhu Rex.Zhu@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index a7e54820a330..85bcd236890e 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -5479,6 +5479,11 @@ static int gfx_v8_0_set_powergating_state(void *handle, if (amdgpu_sriov_vf(adev)) return 0;
+ if (adev->pg_flags & (AMD_PG_SUPPORT_GFX_SMG | + AMD_PG_SUPPORT_RLC_SMU_HS | + AMD_PG_SUPPORT_CP | + AMD_PG_SUPPORT_GFX_DMG)) + adev->gfx.rlc.funcs->enter_safe_mode(adev); switch (adev->asic_type) { case CHIP_CARRIZO: case CHIP_STONEY: @@ -5527,7 +5532,11 @@ static int gfx_v8_0_set_powergating_state(void *handle, default: break; } - + if (adev->pg_flags & (AMD_PG_SUPPORT_GFX_SMG | + AMD_PG_SUPPORT_RLC_SMU_HS | + AMD_PG_SUPPORT_CP | + AMD_PG_SUPPORT_GFX_DMG)) + adev->gfx.rlc.funcs->exit_safe_mode(adev); return 0; }
From: Rex Zhu Rex.Zhu@amd.com
[ Upstream commit 2ab4d0e74256fc49b7b270f63c1d1e47c2455abc ]
For SI/Kv, the power state is managed by function amdgpu_pm_compute_clocks.
when dpm enabled, we should call amdgpu_pm_compute_clocks to update current power state instand of set boot state.
this change can fix the oops when kfd driver was enabled on Kv.
Reviewed-by: Alex Deucher alexander.deucher@amd.com Tested-by: Michel Dänzer michel.daenzer@amd.com Signed-off-by: Rex Zhu Rex.Zhu@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 4 +--- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 3 +-- 2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c index 3bbf2ccfca89..c76073b422d6 100644 --- a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c @@ -1352,8 +1352,6 @@ static int kv_dpm_enable(struct amdgpu_device *adev) return ret; }
- kv_update_current_ps(adev, adev->pm.dpm.boot_ps); - if (adev->irq.installed && amdgpu_is_internal_thermal_sensor(adev->pm.int_thermal_type)) { ret = kv_set_thermal_temperature_range(adev, KV_TEMP_RANGE_MIN, KV_TEMP_RANGE_MAX); @@ -3054,7 +3052,7 @@ static int kv_dpm_hw_init(void *handle) else adev->pm.dpm_enabled = true; mutex_unlock(&adev->pm.mutex); - + amdgpu_pm_compute_clocks(adev); return ret; }
diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 6f1dea157a77..55613f425931 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -6884,7 +6884,6 @@ static int si_dpm_enable(struct amdgpu_device *adev)
si_enable_auto_throttle_source(adev, AMDGPU_DPM_AUTO_THROTTLE_SRC_THERMAL, true); si_thermal_start_thermal_controller(adev); - ni_update_current_ps(adev, boot_ps);
return 0; } @@ -7758,7 +7757,7 @@ static int si_dpm_hw_init(void *handle) else adev->pm.dpm_enabled = true; mutex_unlock(&adev->pm.mutex); - + amdgpu_pm_compute_clocks(adev); return ret; }
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit 46cb52ad414ac829680d0bb8cc7090ac2b577ca7 ]
The DMA is broken on this specific device for some unknown reason (probably badly designed or plain broken interface electronics) and will only work with PIO. Other users of the same hardware does not have this problem.
Add a specific quirk so that this Gemini device gets DMA turned off. Also fix up some code around passing the port information around in probe while we're at it.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/ata/pata_ftide010.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/pata_ftide010.c b/drivers/ata/pata_ftide010.c index 5d4b72e21161..569a4a662dcd 100644 --- a/drivers/ata/pata_ftide010.c +++ b/drivers/ata/pata_ftide010.c @@ -256,14 +256,12 @@ static struct ata_port_operations pata_ftide010_port_ops = { .qc_issue = ftide010_qc_issue, };
-static struct ata_port_info ftide010_port_info[] = { - { - .flags = ATA_FLAG_SLAVE_POSS, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA6, - .pio_mask = ATA_PIO4, - .port_ops = &pata_ftide010_port_ops, - }, +static struct ata_port_info ftide010_port_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .pio_mask = ATA_PIO4, + .port_ops = &pata_ftide010_port_ops, };
#if IS_ENABLED(CONFIG_SATA_GEMINI) @@ -349,6 +347,7 @@ static int pata_ftide010_gemini_cable_detect(struct ata_port *ap) }
static int pata_ftide010_gemini_init(struct ftide010 *ftide, + struct ata_port_info *pi, bool is_ata1) { struct device *dev = ftide->dev; @@ -373,7 +372,13 @@ static int pata_ftide010_gemini_init(struct ftide010 *ftide,
/* Flag port as SATA-capable */ if (gemini_sata_bridge_enabled(sg, is_ata1)) - ftide010_port_info[0].flags |= ATA_FLAG_SATA; + pi->flags |= ATA_FLAG_SATA; + + /* This device has broken DMA, only PIO works */ + if (of_machine_is_compatible("itian,sq201")) { + pi->mwdma_mask = 0; + pi->udma_mask = 0; + }
/* * We assume that a simple 40-wire cable is used in the PATA mode. @@ -435,6 +440,7 @@ static int pata_ftide010_gemini_init(struct ftide010 *ftide, } #else static int pata_ftide010_gemini_init(struct ftide010 *ftide, + struct ata_port_info *pi, bool is_ata1) { return -ENOTSUPP; @@ -446,7 +452,7 @@ static int pata_ftide010_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; - const struct ata_port_info pi = ftide010_port_info[0]; + struct ata_port_info pi = ftide010_port_info; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ftide010 *ftide; struct resource *res; @@ -490,6 +496,7 @@ static int pata_ftide010_probe(struct platform_device *pdev) * are ATA0. This will also set up the cable types. */ ret = pata_ftide010_gemini_init(ftide, + &pi, (res->start == 0x63400000)); if (ret) goto err_dis_clk;
From: James Smart jsmart2021@gmail.com
[ Upstream commit afd299ca996929f4f98ac20da0044c0cdc124879 ]
When a targetport is removed from the config, fcloop will avoid calling the LS done() routine thinking the targetport is gone. This leaves the initiator reset/reconnect hanging as it waits for a status on the Create_Association LS for the reconnect.
Change the filter in the LS callback path. If tport null (set when failed validation before "sending to remote port"), be sure to call done. This was the main bug. But, continue the logic that only calls done if tport was set but there is no remoteport (e.g. case where remoteport has been removed, thus host doesn't expect a completion).
Signed-off-by: James Smart james.smart@broadcom.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/nvme/target/fcloop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c index c0080f6ab2f5..0b0a4825b3eb 100644 --- a/drivers/nvme/target/fcloop.c +++ b/drivers/nvme/target/fcloop.c @@ -300,7 +300,7 @@ fcloop_tgt_lsrqst_done_work(struct work_struct *work) struct fcloop_tport *tport = tls_req->tport; struct nvmefc_ls_req *lsreq = tls_req->lsreq;
- if (tport->remoteport) + if (!tport || tport->remoteport) lsreq->done(lsreq, tls_req->status); }
@@ -318,6 +318,7 @@ fcloop_ls_req(struct nvme_fc_local_port *localport,
if (!rport->targetport) { tls_req->status = -ECONNREFUSED; + tls_req->tport = NULL; schedule_work(&tls_req->work); return ret; }
From: Tony Lindgren tony@atomide.com
[ Upstream commit 2d59bb602314a4b2593fde267734266b5e872dd0 ]
Otherwise we can get the following errors occasionally on some devices:
mmc1: tried to HW reset card, got error -110 mmcblk1: error -110 requesting status mmcblk1: recovery failed! print_req_error: I/O error, dev mmcblk1, sector 14329 ...
I have one device that hits this error almost on every boot, and another one that hits it only rarely with the other ones I've used behave without problems. I'm not sure if the issue is related to a particular eMMC card model, but in case it is, both of the machines with issues have:
# cat /sys/class/mmc_host/mmc1/mmc1:0001/manfid \ /sys/class/mmc_host/mmc1/mmc1:0001/oemid \ /sys/class/mmc_host/mmc1/mmc1:0001/name 0x000045 0x0100 SEM16G
and the working ones have:
0x000011 0x0100 016G92
Note that "ti,non-removable" is different as omap_hsmmc_reg_get() does not call omap_hsmmc_disable_boot_regulators() if no_regulator_off_init is set. And currently we set no_regulator_off_init only for "ti,non-removable" and not for "non-removable". It seems that we should have "non-removable" with some other mmc generic property behave in the same way instead of having to use a non-generic property. But let's fix the issue first.
Fixes: 7e2f8c0ae670 ("ARM: dts: Add minimal support for motorola droid 4 xt894") Cc: Marcel Partap mpartap@gmx.net Cc: Merlijn Wajer merlijn@wizzup.org Cc: Michael Scott hashcode0f@gmail.com Cc: NeKit nekit1000@gmail.com Cc: Pavel Machek pavel@ucw.cz Cc: Sebastian Reichel sre@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 8b93d37310f2..bad690b23081 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -314,7 +314,7 @@ &mmc2 { vmmc-supply = <&vsdio>; bus-width = <8>; - non-removable; + ti,non-removable; };
&mmc3 {
From: Marc Zyngier marc.zyngier@arm.com
[ Upstream commit 1d8f574708a3fb6f18c85486d0c5217df893c0cf ]
An unfortunate consequence of having a strong typing for the input values to the SMC call is that it also affects the type of the return values, limiting r0 to 32 bits and r{1,2,3} to whatever was passed as an input.
Let's turn everything into "unsigned long", which satisfies the requirements of both architectures, and allows for the full range of return values.
Reported-by: Julien Grall julien.grall@arm.com Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- include/linux/arm-smccc.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index ca1d2cc2cdfa..5a91ff33720b 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -199,31 +199,31 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1,
#define __declare_arg_0(a0, res) \ struct arm_smccc_res *___res = res; \ - register u32 r0 asm("r0") = a0; \ + register unsigned long r0 asm("r0") = (u32)a0; \ register unsigned long r1 asm("r1"); \ register unsigned long r2 asm("r2"); \ register unsigned long r3 asm("r3")
#define __declare_arg_1(a0, a1, res) \ struct arm_smccc_res *___res = res; \ - register u32 r0 asm("r0") = a0; \ - register typeof(a1) r1 asm("r1") = a1; \ + register unsigned long r0 asm("r0") = (u32)a0; \ + register unsigned long r1 asm("r1") = a1; \ register unsigned long r2 asm("r2"); \ register unsigned long r3 asm("r3")
#define __declare_arg_2(a0, a1, a2, res) \ struct arm_smccc_res *___res = res; \ - register u32 r0 asm("r0") = a0; \ - register typeof(a1) r1 asm("r1") = a1; \ - register typeof(a2) r2 asm("r2") = a2; \ + register unsigned long r0 asm("r0") = (u32)a0; \ + register unsigned long r1 asm("r1") = a1; \ + register unsigned long r2 asm("r2") = a2; \ register unsigned long r3 asm("r3")
#define __declare_arg_3(a0, a1, a2, a3, res) \ struct arm_smccc_res *___res = res; \ - register u32 r0 asm("r0") = a0; \ - register typeof(a1) r1 asm("r1") = a1; \ - register typeof(a2) r2 asm("r2") = a2; \ - register typeof(a3) r3 asm("r3") = a3 + register unsigned long r0 asm("r0") = (u32)a0; \ + register unsigned long r1 asm("r1") = a1; \ + register unsigned long r2 asm("r2") = a2; \ + register unsigned long r3 asm("r3") = a3
#define __declare_arg_4(a0, a1, a2, a3, a4, res) \ __declare_arg_3(a0, a1, a2, a3, res); \
From: Marc Zyngier marc.zyngier@arm.com
[ Upstream commit 755a8bf5579d22eb5636685c516d8dede799e27b ]
If someone has the silly idea to write something along those lines:
extern u64 foo(void);
void bar(struct arm_smccc_res *res) { arm_smccc_1_1_smc(0xbad, foo(), res); }
they are in for a surprise, as this gets compiled as:
0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d4000003 smc #0x0 5ac: b4000073 cbz x19, 5b8 <bar+0x30> 5b0: a9000660 stp x0, x1, [x19] 5b4: a9010e62 stp x2, x3, [x19, #16] 5b8: f9400bf3 ldr x19, [sp, #16] 5bc: a8c27bfd ldp x29, x30, [sp], #32 5c0: d65f03c0 ret 5c4: d503201f nop
The call to foo "overwrites" the x0 register for the return value, and we end up calling the wrong secure service.
A solution is to evaluate all the parameters before assigning anything to specific registers, leading to the expected result:
0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d28175a0 mov x0, #0xbad 5ac: d4000003 smc #0x0 5b0: b4000073 cbz x19, 5bc <bar+0x34> 5b4: a9000660 stp x0, x1, [x19] 5b8: a9010e62 stp x2, x3, [x19, #16] 5bc: f9400bf3 ldr x19, [sp, #16] 5c0: a8c27bfd ldp x29, x30, [sp], #32 5c4: d65f03c0 ret
Reported-by: Julien Grall julien.grall@arm.com Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- include/linux/arm-smccc.h | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index 5a91ff33720b..18863d56273c 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -205,41 +205,51 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1, register unsigned long r3 asm("r3")
#define __declare_arg_1(a0, a1, res) \ + typeof(a1) __a1 = a1; \ struct arm_smccc_res *___res = res; \ register unsigned long r0 asm("r0") = (u32)a0; \ - register unsigned long r1 asm("r1") = a1; \ + register unsigned long r1 asm("r1") = __a1; \ register unsigned long r2 asm("r2"); \ register unsigned long r3 asm("r3")
#define __declare_arg_2(a0, a1, a2, res) \ + typeof(a1) __a1 = a1; \ + typeof(a2) __a2 = a2; \ struct arm_smccc_res *___res = res; \ register unsigned long r0 asm("r0") = (u32)a0; \ - register unsigned long r1 asm("r1") = a1; \ - register unsigned long r2 asm("r2") = a2; \ + register unsigned long r1 asm("r1") = __a1; \ + register unsigned long r2 asm("r2") = __a2; \ register unsigned long r3 asm("r3")
#define __declare_arg_3(a0, a1, a2, a3, res) \ + typeof(a1) __a1 = a1; \ + typeof(a2) __a2 = a2; \ + typeof(a3) __a3 = a3; \ struct arm_smccc_res *___res = res; \ register unsigned long r0 asm("r0") = (u32)a0; \ - register unsigned long r1 asm("r1") = a1; \ - register unsigned long r2 asm("r2") = a2; \ - register unsigned long r3 asm("r3") = a3 + register unsigned long r1 asm("r1") = __a1; \ + register unsigned long r2 asm("r2") = __a2; \ + register unsigned long r3 asm("r3") = __a3
#define __declare_arg_4(a0, a1, a2, a3, a4, res) \ + typeof(a4) __a4 = a4; \ __declare_arg_3(a0, a1, a2, a3, res); \ - register typeof(a4) r4 asm("r4") = a4 + register unsigned long r4 asm("r4") = __a4
#define __declare_arg_5(a0, a1, a2, a3, a4, a5, res) \ + typeof(a5) __a5 = a5; \ __declare_arg_4(a0, a1, a2, a3, a4, res); \ - register typeof(a5) r5 asm("r5") = a5 + register unsigned long r5 asm("r5") = __a5
#define __declare_arg_6(a0, a1, a2, a3, a4, a5, a6, res) \ + typeof(a6) __a6 = a6; \ __declare_arg_5(a0, a1, a2, a3, a4, a5, res); \ - register typeof(a6) r6 asm("r6") = a6 + register unsigned long r6 asm("r6") = __a6
#define __declare_arg_7(a0, a1, a2, a3, a4, a5, a6, a7, res) \ + typeof(a7) __a7 = a7; \ __declare_arg_6(a0, a1, a2, a3, a4, a5, a6, res); \ - register typeof(a7) r7 asm("r7") = a7 + register unsigned long r7 asm("r7") = __a7
#define ___declare_args(count, ...) __declare_arg_ ## count(__VA_ARGS__) #define __declare_args(count, ...) ___declare_args(count, __VA_ARGS__)
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit 7fd6d98b89f382d414e1db528e29a67bbd749457 ]
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion.
However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers:
Device (SMBU) { ...
OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) }
Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (_SB.PCI0.SMBU.TCOB << 0x05) }
Return (TCBV) /* _SB_.PCI0.SMBU.TCBV */ }
OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } }
Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore.
Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus.
Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737 Reported-by: Yussuf Khalil dev@pp3345.net Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Reviewed-by: Jean Delvare jdelvare@suse.de Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/i2c/busses/i2c-i801.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ba8df2fde1b2..ec10aa1655f7 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1411,6 +1411,13 @@ static void i801_add_tco(struct i801_priv *priv) }
#ifdef CONFIG_ACPI +static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv, + acpi_physical_address address) +{ + return address >= priv->smba && + address <= pci_resource_end(priv->pci_dev, SMBBAR); +} + static acpi_status i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, u64 *value, void *handler_context, void *region_context) @@ -1426,7 +1433,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, */ mutex_lock(&priv->acpi_lock);
- if (!priv->acpi_reserved) { + if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) { priv->acpi_reserved = true;
dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit ff924c5a1ec7548825cc2d07980b03be4224ffac ]
Fix the section mismatch warning in arch/x86/mm/pti.c:
WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected.
Fixes: 85900ea51577 ("x86/pti: Map the vsyscall page if needed") Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Andy Lutomirski luto@kernel.org Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/x86/mm/pti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c index d6f11accd37a..3fa048a4eb6f 100644 --- a/arch/x86/mm/pti.c +++ b/arch/x86/mm/pti.c @@ -220,7 +220,7 @@ static __init pmd_t *pti_user_pagetable_walk_pmd(unsigned long address) * * Returns a pointer to a PTE on success, or NULL on failure. */ -static __init pte_t *pti_user_pagetable_walk_pte(unsigned long address) +static pte_t *pti_user_pagetable_walk_pte(unsigned long address) { gfp_t gfp = (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO); pmd_t *pmd = pti_user_pagetable_walk_pmd(address);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin