From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

[ Upstream commit db264d4c66c0fe007b5d19fd007707cd0697603d ]

Since usb_register_dev() from imon_init_display() from imon_probe() holds minor_rwsem while display_open() which holds driver_lock and ictx->lock is called with minor_rwsem held from usb_open(), holding driver_lock or ictx->lock when calling usb_register_dev() causes circular locking dependency problem.

Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while display_open() which holds driver_lock is called with minor_rwsem held, holding driver_lock when calling usb_deregister_dev() also causes circular locking dependency problem.

Sean Young explained that the problem is there are imon devices which have two usb interfaces, even though it is one device. The probe and disconnect function of both usb interfaces can run concurrently.

Alan Stern responded that the driver and USB cores guarantee that when an interface is probed, both the interface and its USB device are locked. Ditto for when the disconnect callback gets run. So concurrent probing/ disconnection of multiple interfaces on the same device is not possible.

Therefore, we don't need locks for handling race between imon_probe() and imon_disconnect(). But we still need to handle race between display_open() /vfd_write()/lcd_write()/display_close() and imon_disconnect(), for disconnect event can happen while file descriptors are in use.

Since "struct file"->private_data is set by display_open(), vfd_write()/ lcd_write()/display_close() can assume that "struct file"->private_data is not NULL even after usb_set_intfdata(interface, NULL) was called.

Replace insufficiently held driver_lock with refcount_t based management. Add a boolean flag for recording whether imon_disconnect() was already called. Use RCU for accessing this boolean flag and refcount_t.

Since the boolean flag for imon_disconnect() is shared, disconnect event on either intf0 or intf1 affects both interfaces. But I assume that this change does not matter, for usually disconnect event would not happen while interfaces are in use.

Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497

Reported-by: syzbot syzbot+c558267ad910fc494497@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Tested-by: syzbot syzbot+c558267ad910fc494497@syzkaller.appspotmail.com Cc: Alan Stern stern@rowland.harvard.edu Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Stable-dep-of: fa0f61cc1d82 ("media: rc: fix races with imon_disconnect()") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/rc/imon.c | 99 +++++++++++++++++++---------------------- 1 file changed, 47 insertions(+), 52 deletions(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index be4f92d4e6b6b..b1a759e174841 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -153,6 +153,24 @@ struct imon_context { const struct imon_usb_dev_descr *dev_descr; /* device description with key */ /* table for front panels */ + /* + * Fields for deferring free_imon_context(). + * + * Since reference to "struct imon_context" is stored into + * "struct file"->private_data, we need to remember + * how many file descriptors might access this "struct imon_context". + */ + refcount_t users; + /* + * Use a flag for telling display_open()/vfd_write()/lcd_write() that + * imon_disconnect() was already called. + */ + bool disconnected; + /* + * We need to wait for RCU grace period in order to allow + * display_open() to safely check ->disconnected and increment ->users. + */ + struct rcu_head rcu; };

#define TOUCH_TIMEOUT (HZ/30) @@ -160,18 +178,18 @@ struct imon_context { /* vfd character device file operations */ static const struct file_operations vfd_fops = { .owner = THIS_MODULE, - .open = &display_open, - .write = &vfd_write, - .release = &display_close, + .open = display_open, + .write = vfd_write, + .release = display_close, .llseek = noop_llseek, };

/* lcd character device file operations */ static const struct file_operations lcd_fops = { .owner = THIS_MODULE, - .open = &display_open, - .write = &lcd_write, - .release = &display_close, + .open = display_open, + .write = lcd_write, + .release = display_close, .llseek = noop_llseek, };

@@ -439,9 +457,6 @@ static struct usb_driver imon_driver = { .id_table = imon_usb_id_table, };

-/* to prevent races between open() and disconnect(), probing, etc */ -static DEFINE_MUTEX(driver_lock); - /* Module bookkeeping bits */ MODULE_AUTHOR(MOD_AUTHOR); MODULE_DESCRIPTION(MOD_DESC); @@ -481,9 +496,11 @@ static void free_imon_context(struct imon_context *ictx) struct device *dev = ictx->dev;

usb_free_urb(ictx->tx_urb); + WARN_ON(ictx->dev_present_intf0); usb_free_urb(ictx->rx_urb_intf0); + WARN_ON(ictx->dev_present_intf1); usb_free_urb(ictx->rx_urb_intf1); - kfree(ictx); + kfree_rcu(ictx, rcu);

dev_dbg(dev, "%s: iMON context freed\n", __func__); } @@ -499,9 +516,6 @@ static int display_open(struct inode *inode, struct file *file) int subminor; int retval = 0;

- /* prevent races with disconnect */ - mutex_lock(&driver_lock); - subminor = iminor(inode); interface = usb_find_interface(&imon_driver, subminor); if (!interface) { @@ -509,13 +523,16 @@ static int display_open(struct inode *inode, struct file *file) retval = -ENODEV; goto exit; } - ictx = usb_get_intfdata(interface);

- if (!ictx) { + rcu_read_lock(); + ictx = usb_get_intfdata(interface); + if (!ictx || ictx->disconnected || !refcount_inc_not_zero(&ictx->users)) { + rcu_read_unlock(); pr_err("no context found for minor %d\n", subminor); retval = -ENODEV; goto exit; } + rcu_read_unlock();

mutex_lock(&ictx->lock);

@@ -533,8 +550,10 @@ static int display_open(struct inode *inode, struct file *file)

mutex_unlock(&ictx->lock);

+ if (retval && refcount_dec_and_test(&ictx->users)) + free_imon_context(ictx); + exit: - mutex_unlock(&driver_lock); return retval; }

@@ -544,16 +563,9 @@ static int display_open(struct inode *inode, struct file *file) */ static int display_close(struct inode *inode, struct file *file) { - struct imon_context *ictx = NULL; + struct imon_context *ictx = file->private_data; int retval = 0;

- ictx = file->private_data; - - if (!ictx) { - pr_err("no context for device\n"); - return -ENODEV; - } - mutex_lock(&ictx->lock);

if (!ictx->display_supported) { @@ -568,6 +580,8 @@ static int display_close(struct inode *inode, struct file *file) }

mutex_unlock(&ictx->lock); + if (refcount_dec_and_test(&ictx->users)) + free_imon_context(ictx); return retval; }

@@ -936,15 +950,12 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, int offset; int seq; int retval = 0; - struct imon_context *ictx; + struct imon_context *ictx = file->private_data; static const unsigned char vfd_packet6[] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };

- ictx = file->private_data; - if (!ictx) { - pr_err_ratelimited("no context for device\n"); + if (ictx->disconnected) return -ENODEV; - }

if (mutex_lock_interruptible(&ictx->lock)) return -ERESTARTSYS; @@ -1021,13 +1032,10 @@ static ssize_t lcd_write(struct file *file, const char __user *buf, size_t n_bytes, loff_t *pos) { int retval = 0; - struct imon_context *ictx; + struct imon_context *ictx = file->private_data;

- ictx = file->private_data; - if (!ictx) { - pr_err_ratelimited("no context for device\n"); + if (ictx->disconnected) return -ENODEV; - }

mutex_lock(&ictx->lock);

@@ -2402,7 +2410,6 @@ static int imon_probe(struct usb_interface *interface, int ifnum, sysfs_err; int ret = 0; struct imon_context *ictx = NULL; - struct imon_context *first_if_ctx = NULL; u16 vendor, product;

usbdev = usb_get_dev(interface_to_usbdev(interface)); @@ -2414,17 +2421,12 @@ static int imon_probe(struct usb_interface *interface, dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n", __func__, vendor, product, ifnum);

- /* prevent races probing devices w/multiple interfaces */ - mutex_lock(&driver_lock); - first_if = usb_ifnum_to_if(usbdev, 0); if (!first_if) { ret = -ENODEV; goto fail; }

- first_if_ctx = usb_get_intfdata(first_if); - if (ifnum == 0) { ictx = imon_init_intf0(interface, id); if (!ictx) { @@ -2432,9 +2434,11 @@ static int imon_probe(struct usb_interface *interface, ret = -ENODEV; goto fail; } + refcount_set(&ictx->users, 1);

} else { /* this is the secondary interface on the device */ + struct imon_context *first_if_ctx = usb_get_intfdata(first_if);

/* fail early if first intf failed to register */ if (!first_if_ctx) { @@ -2448,14 +2452,13 @@ static int imon_probe(struct usb_interface *interface, ret = -ENODEV; goto fail; } + refcount_inc(&ictx->users);

}

usb_set_intfdata(interface, ictx);

if (ifnum == 0) { - mutex_lock(&ictx->lock); - if (product == 0xffdc && ictx->rf_device) { sysfs_err = sysfs_create_group(&interface->dev.kobj, &imon_rf_attr_group); @@ -2466,21 +2469,17 @@ static int imon_probe(struct usb_interface *interface,

if (ictx->display_supported) imon_init_display(ictx, interface); - - mutex_unlock(&ictx->lock); }

dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n", vendor, product, ifnum, usbdev->bus->busnum, usbdev->devnum);

- mutex_unlock(&driver_lock); usb_put_dev(usbdev);

return 0;

fail: - mutex_unlock(&driver_lock); usb_put_dev(usbdev); dev_err(dev, "unable to register, err %d\n", ret);

@@ -2496,10 +2495,8 @@ static void imon_disconnect(struct usb_interface *interface) struct device *dev; int ifnum;

- /* prevent races with multi-interface device probing and display_open */ - mutex_lock(&driver_lock); - ictx = usb_get_intfdata(interface); + ictx->disconnected = true; dev = ictx->dev; ifnum = interface->cur_altsetting->desc.bInterfaceNumber;

@@ -2540,11 +2537,9 @@ static void imon_disconnect(struct usb_interface *interface) } }

- if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) + if (refcount_dec_and_test(&ictx->users)) free_imon_context(ictx);

- mutex_unlock(&driver_lock); - dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n", __func__, ifnum); }

From: Larshin Sergey Sergey.Larshin@kaspersky.com

[ Upstream commit fa0f61cc1d828178aa921475a9b786e7fbb65ccb ]

Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465

CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __create_pipe include/linux/usb.h:1945 [inline] send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991 vfs_write+0x2d7/0xdd0 fs/read_write.c:576 ksys_write+0x127/0x250 fs/read_write.c:631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The iMON driver improperly releases the usb_device reference in imon_disconnect without coordinating with active users of the device.

Specifically, the fields usbdev_intf0 and usbdev_intf1 are not protected by the users counter (ictx->users). During probe, imon_init_intf0 or imon_init_intf1 increments the usb_device reference count depending on the interface. However, during disconnect, usb_put_dev is called unconditionally, regardless of actual usage.

As a result, if vfd_write or other operations are still in progress after disconnect, this can lead to a use-after-free of the usb_device pointer.

Thread 1 vfd_write Thread 2 imon_disconnect ... if usb_put_dev(ictx->usbdev_intf0) else usb_put_dev(ictx->usbdev_intf1) ... while send_packet if pipe = usb_sndintpipe( ictx->usbdev_intf0) UAF else pipe = usb_sndctrlpipe( ictx->usbdev_intf0, 0) UAF

Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by checking ictx->disconnected in all writer paths. Add early return with -ENODEV in send_packet(), vfd_write(), lcd_write() and display_open() if the device is no longer present.

Set and read ictx->disconnected under ictx->lock to ensure memory synchronization. Acquire the lock in imon_disconnect() before setting the flag to synchronize with any ongoing operations.

Ensure writers exit early and safely after disconnect before the USB core proceeds with cleanup.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver") Cc: stable@vger.kernel.org

Signed-off-by: Larshin Sergey Sergey.Larshin@kaspersky.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Hans Verkuil hverkuil+cisco@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/rc/imon.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 02949597aaa64..8cab6e1500b70 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -536,7 +536,9 @@ static int display_open(struct inode *inode, struct file *file)

mutex_lock(&ictx->lock);

- if (!ictx->display_supported) { + if (ictx->disconnected) { + retval = -ENODEV; + } else if (!ictx->display_supported) { pr_err("display not supported by device\n"); retval = -ENODEV; } else if (ictx->display_isopen) { @@ -600,6 +602,9 @@ static int send_packet(struct imon_context *ictx)

lockdep_assert_held(&ictx->lock);

+ if (ictx->disconnected) + return -ENODEV; + /* Check if we need to use control or interrupt urb */ if (!ictx->tx_control) { pipe = usb_sndintpipe(ictx->usbdev_intf0, @@ -956,12 +961,14 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, static const unsigned char vfd_packet6[] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };

- if (ictx->disconnected) - return -ENODEV; - if (mutex_lock_interruptible(&ictx->lock)) return -ERESTARTSYS;

+ if (ictx->disconnected) { + retval = -ENODEV; + goto exit; + } + if (!ictx->dev_present_intf0) { pr_err_ratelimited("no iMON device present\n"); retval = -ENODEV; @@ -1036,11 +1043,13 @@ static ssize_t lcd_write(struct file *file, const char __user *buf, int retval = 0; struct imon_context *ictx = file->private_data;

- if (ictx->disconnected) - return -ENODEV; - mutex_lock(&ictx->lock);

+ if (ictx->disconnected) { + retval = -ENODEV; + goto exit; + } + if (!ictx->display_supported) { pr_err_ratelimited("no iMON display present\n"); retval = -ENODEV; @@ -2496,7 +2505,11 @@ static void imon_disconnect(struct usb_interface *interface) int ifnum;

ictx = usb_get_intfdata(interface); + + mutex_lock(&ictx->lock); ictx->disconnected = true; + mutex_unlock(&ictx->lock); + dev = ictx->dev; ifnum = interface->cur_altsetting->desc.bInterfaceNumber;