The device release number for HX-type devices is configurable in EEPROM/OTPROM and cannot be used reliably for type detection.

Assume all (non-H) devices with bcdUSB 1.1 and unknown bcdDevice to be of HX type while adding a bcdDevice check for HXD and TB (1.1 and 2.0, respectively).

Reported-by: Chris chris@cyber-anlage.de Fixes: 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") Cc: stable@vger.kernel.org # 5.13 Signed-off-by: Johan Hovold johan@kernel.org --- drivers/usb/serial/pl2303.c | 41 ++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 2f2f5047452b..17601e32083e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -418,24 +418,33 @@ static int pl2303_detect_type(struct usb_serial *serial) bcdDevice = le16_to_cpu(desc->bcdDevice); bcdUSB = le16_to_cpu(desc->bcdUSB);

- switch (bcdDevice) { - case 0x100: - /* - * Assume it's an HXN-type if the device doesn't support the old read - * request value. - */ - if (bcdUSB == 0x200 && !pl2303_supports_hx_status(serial)) - return TYPE_HXN; + switch (bcdUSB) { + case 0x110: + switch (bcdDevice) { + case 0x300: + return TYPE_HX; + case 0x400: + return TYPE_HXD; + default: + return TYPE_HX; + } break; - case 0x300: - if (bcdUSB == 0x200) + case 0x200: + switch (bcdDevice) { + case 0x100: + /* + * Assume it's an HXN-type if the device doesn't + * support the old read request value. + */ + if (!pl2303_supports_hx_status(serial)) + return TYPE_HXN; + break; + case 0x300: return TYPE_TA; - - return TYPE_HX; - case 0x400: - return TYPE_HXD; - case 0x500: - return TYPE_TB; + case 0x500: + return TYPE_TB; + } + break; }

dev_err(&serial->interface->dev,