From: Pavel Skripkin paskripkin@gmail.com

commit c680ed46e418e9c785d76cf44eb33bfd1e8cf3f6 upstream.

syzbot reported WARNING in vmalloc. The problem was in zero size passed to vmalloc.

The root case was in wrong cxusb_bluebird_lgz201_properties definition. adapter array has only 1 entry, but num_adapters was 2.

Call Trace: __vmalloc_node mm/vmalloc.c:2963 [inline] vmalloc+0x67/0x80 mm/vmalloc.c:2996 dvb_dmx_init+0xe4/0xb90 drivers/media/dvb-core/dvb_demux.c:1251 dvb_usb_adapter_dvb_init+0x564/0x860 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:184 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline] dvb_usb_device_init.cold+0xc94/0x146e drivers/media/usb/dvb-usb/dvb-usb-init.c:308 cxusb_probe+0x159/0x5e0 drivers/media/usb/dvb-usb/cxusb.c:1634

Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device") Cc: stable@vger.kernel.org Reported-by: syzbot+7336195c02c1bd2f64e1@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/media/usb/dvb-usb/cxusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -1789,7 +1789,7 @@ static struct dvb_usb_device_properties

.size_of_priv = sizeof(struct cxusb_state),

- .num_adapters = 2, + .num_adapters = 1, .adapter = { { .num_frontends = 1,

From: Pavel Skripkin paskripkin@gmail.com

commit ab4a0b8fcb9a95c02909b62049811bd2e586aaa4 upstream.

In ems_usb_disconnect() dev pointer, which is netdev private data, is used after free_candev() call: | if (dev) { | unregister_netdev(dev->netdev); | free_candev(dev->netdev); | | unlink_all_urbs(dev); | | usb_free_urb(dev->intr_urb); | | kfree(dev->intr_in_buffer); | kfree(dev->tx_msg_buffer); | }

Fix it by simply moving free_candev() at the end of the block.

Fail log: | BUG: KASAN: use-after-free in ems_usb_disconnect | Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895 | | CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4 | Workqueue: usb_hub_wq hub_event | Call Trace: | dump_stack (lib/dump_stack.c:122) | print_address_description.constprop.0.cold (mm/kasan/report.c:234) | kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436) | ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058)

Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/20210617185130.5834-1-paskripkin@gmail.com Cc: linux-stable stable@vger.kernel.org Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/can/usb/ems_usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -1071,7 +1071,6 @@ static void ems_usb_disconnect(struct us

if (dev) { unregister_netdev(dev->netdev); - free_candev(dev->netdev);

unlink_all_urbs(dev);

@@ -1079,6 +1078,8 @@ static void ems_usb_disconnect(struct us

kfree(dev->intr_in_buffer); kfree(dev->tx_msg_buffer); + + free_candev(dev->netdev); } }

From: Hannu Hartikainen hannu@hrtk.in

commit 4897807753e078655a78de39ed76044d784f3e63 upstream.

The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be a CDC-ACM device in its descriptors but in fact is not. If it is run with echo disabled it returns garbled data, probably due to something that happens in the TTY layer. And when run with echo enabled (the default), it will mess up the calibration data of the sensor the first time any data is sent to the device.

In short, I had a bad time after connecting the sensor and trying to get it to work. I hope blacklisting it in the cdc-acm driver will save someone else a bit of trouble.

Signed-off-by: Hannu Hartikainen hannu@hrtk.in Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/class/cdc-acm.c | 5 +++++ 1 file changed, 5 insertions(+)

--- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1939,6 +1939,11 @@ static const struct usb_device_id acm_id .driver_info = IGNORE_DEVICE, },

+ /* Exclude Heimann Sensor GmbH USB appset demo */ + { USB_DEVICE(0x32a7, 0x0000), + .driver_info = IGNORE_DEVICE, + }, + /* control interfaces without any protocol set */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_PROTO_NONE) },

From: Al Viro viro@zeniv.linux.org.uk

commit 0e8f0d67401589a141950856902c7d0ec8d9c985 upstream.

... and actually should just check it's given an iovec-backed iterator in the first place.

Cc: stable@vger.kernel.org Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- lib/iov_iter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -311,7 +311,7 @@ int iov_iter_fault_in_readable(struct io int err; struct iovec v;

- if (!(i->type & (ITER_BVEC|ITER_KVEC))) { + if (iter_is_iovec(i)) { iterate_iovec(i, bytes, v, iov, skip, ({ err = fault_in_multipages_readable(v.iov_base, v.iov_len);

From: Ludovic Desroches ludovic.desroches@microchip.com

commit 253adffb0e98eaf6da2e7cf73ae68695e21f2f3c upstream.

Fix pinctrl muxing, PD28, PD29 and PD31 can be muxed to peripheral A. It allows to use SCK0, SCK1 and SPI0_NPCS2 signals.

Signed-off-by: Ludovic Desroches ludovic.desroches@microchip.com Fixes: 679f8d92bb01 ("ARM: at91/dt: sama5d4: add pioD pin mux mask and enable pioD") Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Claudiu Beznea claudiu.beznea@microchip.com Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Link: https://lore.kernel.org/r/20191025084210.14726-1-ludovic.desroches@microchip... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1363,7 +1363,7 @@ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ - 0x0003ff00 0x8002a800 0x00000000 /* pioD */ + 0xb003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >;

From: Anirudh Rayabharam mail@anirudhrb.com

commit ce3aba43599f0b50adbebff133df8d08a3d5fffe upstream.

Initialize eh_generation of struct ext4_extent_header to prevent leaking info to userspace. Fixes KMSAN kernel-infoleak bug reported by syzbot at: http://syzkaller.appspot.com/bug?id=78e9ad0e6952a3ca16e8234724b2fa92d041b9b8

Cc: stable@kernel.org Reported-by: syzbot+2dcfeaf8cb49b05e8f1a@syzkaller.appspotmail.com Fixes: a86c61812637 ("[PATCH] ext3: add extent map support") Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Link: https://lore.kernel.org/r/20210506185655.7118-1-mail@anirudhrb.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/ext4/extents.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -865,6 +865,7 @@ int ext4_ext_tree_init(handle_t *handle, eh->eh_entries = 0; eh->eh_magic = EXT4_EXT_MAGIC; eh->eh_max = cpu_to_le16(ext4_ext_space_root(inode, 0)); + eh->eh_generation = 0; ext4_mark_inode_dirty(handle, inode); return 0; } @@ -1128,6 +1129,7 @@ static int ext4_ext_split(handle_t *hand neh->eh_max = cpu_to_le16(ext4_ext_space_block(inode, 0)); neh->eh_magic = EXT4_EXT_MAGIC; neh->eh_depth = 0; + neh->eh_generation = 0;

/* move remainder of path[depth] to the new leaf */ if (unlikely(path[depth].p_hdr->eh_entries != @@ -1205,6 +1207,7 @@ static int ext4_ext_split(handle_t *hand neh->eh_magic = EXT4_EXT_MAGIC; neh->eh_max = cpu_to_le16(ext4_ext_space_block_idx(inode, 0)); neh->eh_depth = cpu_to_le16(depth - i); + neh->eh_generation = 0; fidx = EXT_FIRST_INDEX(neh); fidx->ei_block = border; ext4_idx_store_pblock(fidx, oldblock);

From: Zhang Yi yi.zhang@huawei.com

commit e5e7010e5444d923e4091cafff61d05f2d19cada upstream.

After converting fs shrinkers to new scan/count API, we are no longer pass zero nr_to_scan parameter to detect the number of objects to free, just remove this check.

Fixes: 1ab6c4997e04 ("fs: convert fs shrinkers to new scan/count API") Cc: stable@vger.kernel.org # 3.12+ Signed-off-by: Zhang Yi yi.zhang@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20210522103045.690103-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/ext4/extents_status.c | 3 --- 1 file changed, 3 deletions(-)

--- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -1080,9 +1080,6 @@ static unsigned long ext4_es_scan(struct ret = percpu_counter_read_positive(&sbi->s_es_stats.es_stats_shk_cnt); trace_ext4_es_shrink_scan_enter(sbi->s_sb, nr_to_scan, ret);

- if (!nr_to_scan) - return ret; - nr_shrunk = __es_shrink(sbi, nr_to_scan, NULL);

ret = percpu_counter_read_positive(&sbi->s_es_stats.es_stats_shk_cnt);

From: Zhang Xiaoxu zhangxiaoxu5@huawei.com

commit fcb170a9d825d7db4a3fb870b0300f5a40a8d096 upstream.

The 'queue->nr' will wraparound from 0 to 255 when only current priority queue has tasks. This maybe lead a deadlock same as commit dfe1fe75e00e ("NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()"):

Privileged delegreturn task is queued to privileged list because all the slots are assigned. When non-privileged task complete and release the slot, a non-privileged maybe picked out. It maybe allocate slot failed when the session on draining.

If the 'queue->nr' has wraparound to 255, and no enough slot to service it, then the privileged delegreturn will lost to wake up.

So we should avoid the wraparound on 'queue->nr'.

Reported-by: Hulk Robot hulkci@huawei.com Fixes: 5fcdfacc01f3 ("NFSv4: Return delegations synchronously in evict_inode") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/sunrpc/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -476,7 +476,8 @@ static struct rpc_task *__rpc_find_next_ * Service a batch of tasks from a single owner. */ q = &queue->tasks[queue->priority]; - if (!list_empty(q) && --queue->nr) { + if (!list_empty(q) && queue->nr) { + queue->nr--; task = list_first_entry(q, struct rpc_task, u.tk_wait.list); goto out; }

From: Vineeth Vijayan vneethv@linux.ibm.com

commit c749d8c018daf5fba6dfac7b6c5c78b27efd7d65 upstream.

Currently css_wait_for_slow_path() gets called inside the chp->lock. The path-verification-loop of slowpath inside this lock could lead to deadlock as reported by the lockdep validator.

The ccw_device_get_chp_desc() during the instance of a device-set-online would try to acquire the same 'chp->lock' to read the chp->desc. The instance of this function can get called from multiple scenario, like probing or setting-device online manually. This could, in some corner-cases lead to the deadlock.

lockdep validator reported this as,

CPU0 CPU1 ---- ---- lock(&chp->lock); lock(kn->active#43); lock(&chp->lock); lock((wq_completion)cio);

The chp->lock was introduced to serialize the access of struct channel_path. This lock is not needed for the css_wait_for_slow_path() function, so invoke the slow-path function outside this lock.

Fixes: b730f3a93395 ("[S390] cio: add lock to struct channel_path") Cc: stable@vger.kernel.org Reviewed-by: Peter Oberparleiter oberpar@linux.ibm.com Signed-off-by: Vineeth Vijayan vneethv@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/s390/cio/chp.c | 3 +++ drivers/s390/cio/chsc.c | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -257,6 +257,9 @@ static ssize_t chp_status_write(struct d if (!num_args) return count;

+ /* Wait until previous actions have settled. */ + css_wait_for_slow_path(); + if (!strncasecmp(cmd, "on", 2) || !strcmp(cmd, "1")) { mutex_lock(&cp->lock); error = s390_vary_chpid(cp->chpid, 1); --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -769,8 +769,6 @@ int chsc_chp_vary(struct chp_id chpid, i { struct channel_path *chp = chpid_to_chp(chpid);

- /* Wait until previous actions have settled. */ - css_wait_for_slow_path(); /* * Redo PathVerification on the devices the chpid connects to */

From: Oliver Lang Oliver.Lang@gossenmetrawatt.com

commit 421a26f3d7a7c3ca43f3a9dc0f3cb0f562d5bd95 upstream.

The ltr559 chip uses only the lowest bit of the ALS_CONTR register to configure between active and stand-by mode. In the original driver BIT(1) is used, which does a software reset instead.

This patch fixes the problem by using BIT(0) as als_mode_active for the ltr559 chip.

Fixes: 8592a7eefa54 ("iio: ltr501: Add support for ltr559 chip") Signed-off-by: Oliver Lang Oliver.Lang@gossenmetrawatt.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Tested-by: Nikita Travkin nikita@trvn.ru # ltr559 Link: https://lore.kernel.org/r/20210610134619.2101372-3-mkl@pengutronix.de Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/iio/light/ltr501.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -1183,7 +1183,7 @@ static struct ltr501_chip_info ltr501_ch .als_gain_tbl_size = ARRAY_SIZE(ltr559_als_gain_tbl), .ps_gain = ltr559_ps_gain_tbl, .ps_gain_tbl_size = ARRAY_SIZE(ltr559_ps_gain_tbl), - .als_mode_active = BIT(1), + .als_mode_active = BIT(0), .als_gain_mask = BIT(2) | BIT(3) | BIT(4), .als_gain_shift = 2, .info = &ltr501_info,

From: Ondrej Zary linux@zary.sk

commit d495dd743d5ecd47288156e25c4d9163294a0992 upstream.

Add support for Option International GSM-Ready 56K/ISDN PCMCIA modem card.

Signed-off-by: Ondrej Zary linux@zary.sk Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210611201940.23898-2-linux@zary.sk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/8250/serial_cs.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -771,6 +771,7 @@ static const struct pcmcia_device_id ser PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa), PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),

From: Michael Buesch m@bues.ch

commit 47ec636f7a25aa2549e198c48ecb6b1c25d05456 upstream.

It doesn't make sense to clobber the const driver-side buffer, if a write-to-device attempt failed. All other SSB variants (PCI, PCMCIA and SoC) also don't corrupt the buffer on any failure in block_write. Therefore, remove this memset from the SDIO variant.

Signed-off-by: Michael Büsch m@bues.ch Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210515210252.318be2ba@wiggum Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/ssb/sdio.c | 1 - 1 file changed, 1 deletion(-)

--- a/drivers/ssb/sdio.c +++ b/drivers/ssb/sdio.c @@ -411,7 +411,6 @@ static void ssb_sdio_block_write(struct sdio_claim_host(bus->host_sdio); if (unlikely(ssb_sdio_switch_core(bus, dev))) { error = -EIO; - memset((void *)buffer, 0xff, count); goto err_out; } offset |= bus->sdio_sbaddr & 0xffff;

From: Miklos Szeredi mszeredi@redhat.com

commit 80ef08670d4c28a06a3de954bd350368780bcfef upstream.

A request could end up on the fpq->io list after fuse_abort_conn() has reset fpq->connected and aborted requests on that list:

Thread-1 Thread-2 ======== ======== ->fuse_simple_request() ->shutdown ->__fuse_request_send() ->queue_request() ->fuse_abort_conn() ->fuse_dev_do_read() ->acquire(fpq->lock) ->wait_for(fpq->lock) ->set err to all req's in fpq->io ->release(fpq->lock) ->acquire(fpq->lock) ->add req to fpq->io

After the userspace copy is done the request will be ended, but req->out.h.error will remain uninitialized. Also the copy might block despite being already aborted.

Fix both issues by not allowing the request to be queued on the fpq->io list after fuse_abort_conn() has processed this list.

Reported-by: Pradeep P V K pragalla@codeaurora.org Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Cc: stable@vger.kernel.org # v4.2 Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/fuse/dev.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1315,6 +1315,15 @@ static ssize_t fuse_dev_do_read(struct f goto restart; } spin_lock(&fpq->lock); + /* + * Must not put request on fpq->io queue after having been shut down by + * fuse_abort_conn() + */ + if (!fpq->connected) { + req->out.h.error = err = -ECONNABORTED; + goto out_end; + + } list_add(&req->list, &fpq->io); spin_unlock(&fpq->lock); cs->req = req;

From: Tian Tao tiantao6@hisilicon.com

[ Upstream commit e7a1a3abea373e41ba7dfe0fbc93cb79b6a3a529 ]

word_len should be checked in the omap1_spi100k_setup_transfer function to see if it exceeds 32.

Signed-off-by: Tian Tao tiantao6@hisilicon.com Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilic... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-omap-100k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 1eccdc4a4581..2eeb0fe2eed2 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -251,7 +251,7 @@ static int omap1_spi100k_setup_transfer(struct spi_device *spi, else word_len = spi->bits_per_word;

- if (spi->bits_per_word > 32) + if (word_len > 32) return -EINVAL; cs->word_len = word_len;

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]

syzbot reported leak in cpia2 usb driver. The problem was in invalid error handling.

v4l2_device_register() is called in cpia2_init_camera_struct(), but all error cases after cpia2_init_camera_struct() did not call the v4l2_device_unregister()

Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/cpia2/cpia2.h | 1 + drivers/media/usb/cpia2/cpia2_core.c | 12 ++++++++++++ drivers/media/usb/cpia2/cpia2_usb.c | 13 +++++++------ 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h index cdef677d57ec..80a7af6482ae 100644 --- a/drivers/media/usb/cpia2/cpia2.h +++ b/drivers/media/usb/cpia2/cpia2.h @@ -442,6 +442,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd); int cpia2_do_command(struct camera_data *cam, unsigned int command, unsigned char direction, unsigned char param); +void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf); struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf); int cpia2_init_camera(struct camera_data *cam); int cpia2_allocate_buffers(struct camera_data *cam); diff --git a/drivers/media/usb/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c index 187012ce444b..35c9e00267d5 100644 --- a/drivers/media/usb/cpia2/cpia2_core.c +++ b/drivers/media/usb/cpia2/cpia2_core.c @@ -2158,6 +2158,18 @@ static void reset_camera_struct(struct camera_data *cam) cam->height = cam->params.roi.height; }

+/****************************************************************************** + * + * cpia2_init_camera_struct + * + * Deinitialize camera struct + *****************************************************************************/ +void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf) +{ + v4l2_device_unregister(&cam->v4l2_dev); + kfree(cam); +} + /****************************************************************************** * * cpia2_init_camera_struct diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c index 76b9cb940b87..7bd50feadfe4 100644 --- a/drivers/media/usb/cpia2/cpia2_usb.c +++ b/drivers/media/usb/cpia2/cpia2_usb.c @@ -835,15 +835,13 @@ static int cpia2_usb_probe(struct usb_interface *intf, ret = set_alternate(cam, USBIF_CMDONLY); if (ret < 0) { ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret); - kfree(cam); - return ret; + goto alt_err; }

if((ret = cpia2_init_camera(cam)) < 0) { ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret); - kfree(cam); - return ret; + goto alt_err; } LOG(" CPiA Version: %d.%02d (%d.%d)\n", cam->params.version.firmware_revision_hi, @@ -863,11 +861,14 @@ static int cpia2_usb_probe(struct usb_interface *intf, ret = cpia2_register_camera(cam); if (ret < 0) { ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret); - kfree(cam); - return ret; + goto alt_err; }

return 0; + +alt_err: + cpia2_deinit_camera_struct(cam, intf); + return ret; }

/******************************************************************************

From: Jack Xu jack.xu@intel.com

[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]

Check the return code of the function qat_hal_rd_rel_reg() and return it to the caller.

This is to fix the following warning when compiling the driver with clang scan-build:

drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value

Signed-off-by: Jack Xu jack.xu@intel.com Co-developed-by: Zhehui Xiang zhehui.xiang@intel.com Signed-off-by: Zhehui Xiang zhehui.xiang@intel.com Reviewed-by: Giovanni Cabiddu giovanni.cabiddu@intel.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/qat/qat_common/qat_hal.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c index 380e761801a7..5e5003379281 100644 --- a/drivers/crypto/qat/qat_common/qat_hal.c +++ b/drivers/crypto/qat/qat_common/qat_hal.c @@ -1210,7 +1210,11 @@ static int qat_hal_put_rel_wr_xfer(struct icp_qat_fw_loader_handle *handle, pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr); return -EINVAL; } - qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval); + status = qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval); + if (status) { + pr_err("QAT: failed to read register"); + return status; + } gpr_addr = qat_hal_get_reg_addr(ICP_GPB_REL, gprnum); data16low = 0xffff & data; data16hi = 0xffff & (data >> 0x10);

From: Lv Yunlong lyl2019@mail.ustc.edu.cn

[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]

A use after free bug caused by the dangling pointer filp->privitate_data in v4l2_fh_release. See https://lore.kernel.org/patchwork/patch/1419058/.

My patch sets the dangling pointer to NULL to provide robust.

Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/v4l2-core/v4l2-fh.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c index 1d076deb05a9..ce844ecc3340 100644 --- a/drivers/media/v4l2-core/v4l2-fh.c +++ b/drivers/media/v4l2-core/v4l2-fh.c @@ -107,6 +107,7 @@ int v4l2_fh_release(struct file *filp) v4l2_fh_del(fh); v4l2_fh_exit(fh); kfree(fh); + filp->private_data = NULL; } return 0; }

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ]

Before referencing 'host->data', the driver needs to check whether it is null pointer, otherwise it will cause a null pointer reference.

This log reveals it:

[ 29.355199] BUG: kernel NULL pointer dereference, address: 0000000000000014 [ 29.357323] #PF: supervisor write access in kernel mode [ 29.357706] #PF: error_code(0x0002) - not-present page [ 29.358088] PGD 0 P4D 0 [ 29.358280] Oops: 0002 [#1] PREEMPT SMP PTI [ 29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4- g70e7f0549188-dirty #102 [ 29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.362042] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.363604] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.364651] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.365235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.366170] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.367197] Call Trace: [ 29.367381] <IRQ> [ 29.367537] __handle_irq_event_percpu+0x53/0x3e0 [ 29.367916] handle_irq_event_percpu+0x35/0x90 [ 29.368247] handle_irq_event+0x39/0x60 [ 29.368632] handle_fasteoi_irq+0xc2/0x1d0 [ 29.368950] __common_interrupt+0x7f/0x150 [ 29.369254] common_interrupt+0xb4/0xd0 [ 29.369547] </IRQ> [ 29.369708] asm_common_interrupt+0x1e/0x40 [ 29.370016] RIP: 0010:native_safe_halt+0x17/0x20 [ 29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91 [ 29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 29.372079] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4 RDI: ffffffff85403406 [ 29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 29.373646] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86009188 [ 29.374160] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100258000 [ 29.374690] default_idle+0x9/0x10 [ 29.374944] arch_cpu_idle+0xa/0x10 [ 29.375198] default_idle_call+0x6e/0x250 [ 29.375491] do_idle+0x1f0/0x2d0 [ 29.375740] cpu_startup_entry+0x18/0x20 [ 29.376034] start_secondary+0x11f/0x160 [ 29.376328] secondary_startup_64_no_verify+0xb0/0xbb [ 29.376705] Modules linked in: [ 29.376939] Dumping ftrace buffer: [ 29.377187] (ftrace buffer empty) [ 29.377460] CR2: 0000000000000014 [ 29.377712] ---[ end trace 51a473dffb618c47 ]--- [ 29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.380098] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.381653] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.382697] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.383277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.384223] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.385260] Kernel panic - not syncing: Fatal exception in interrupt [ 29.385882] Dumping ftrace buffer: [ 29.386135] (ftrace buffer empty) [ 29.386401] Kernel Offset: disabled [ 29.386656] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/via-sdmmc.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index b455e9cf95af..a3472127bea3 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -859,6 +859,9 @@ static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask) { BUG_ON(intmask == 0);

+ if (!host->data) + return; + if (intmask & VIA_CRDR_SDSTS_DT) host->data->error = -ETIMEDOUT; else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))

From: Mauro Carvalho Chehab mchehab+huawei@kernel.org

[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]

The risk of especulation is actually almost-non-existing here, as there are very few users of TCP/IP using the DVB stack, as, this is mainly used with DVB-S/S2 cards, and only by people that receives TCP/IP from satellite connections, which limits a lot the number of users of such feature(*).

(*) In thesis, DVB-C cards could also benefit from it, but I'm yet to see a hardware that supports it.

Yet, fixing it is trivial.

Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index ce4332e80a91..735baa74043c 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -57,6 +57,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/nospec.h> #include <linux/etherdevice.h> #include <linux/dvb/net.h> #include <linux/uio.h> @@ -1350,14 +1351,20 @@ static int dvb_net_do_ioctl(struct file *file, struct net_device *netdev; struct dvb_net_priv *priv_data; struct dvb_net_if *dvbnetif = parg; + int if_num = dvbnetif->if_num;

- if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || - !dvbnet->state[dvbnetif->if_num]) { + if (if_num >= DVB_NET_DEVICES_MAX) { ret = -EINVAL; goto ioctl_error; } + if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);

- netdev = dvbnet->device[dvbnetif->if_num]; + if (!dvbnet->state[if_num]) { + ret = -EINVAL; + goto ioctl_error; + } + + netdev = dvbnet->device[if_num];

priv_data = netdev_priv(netdev); dvbnetif->pid=priv_data->pid; @@ -1410,14 +1417,20 @@ static int dvb_net_do_ioctl(struct file *file, struct net_device *netdev; struct dvb_net_priv *priv_data; struct __dvb_net_if_old *dvbnetif = parg; + int if_num = dvbnetif->if_num; + + if (if_num >= DVB_NET_DEVICES_MAX) { + ret = -EINVAL; + goto ioctl_error; + } + if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);

- if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || - !dvbnet->state[dvbnetif->if_num]) { + if (!dvbnet->state[if_num]) { ret = -EINVAL; goto ioctl_error; }

- netdev = dvbnet->device[dvbnetif->if_num]; + netdev = dvbnet->device[if_num];

priv_data = netdev_priv(netdev); dvbnetif->pid=priv_data->pid;

From: Axel Lin axel.lin@ingics.com

[ Upstream commit a336dc8f683e5be794186b5643cd34cb28dd2c53 ]

Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time.

Also fix returning negative value when new_sel < old_sel.

Signed-off-by: Axel Lin axel.lin@ingics.com Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/da9052-regulator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 12a25b40e473..fa9cb7df79de 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -258,7 +258,8 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev, case DA9052_ID_BUCK3: case DA9052_ID_LDO2: case DA9052_ID_LDO3: - ret = (new_sel - old_sel) * info->step_uV / 6250; + ret = DIV_ROUND_UP(abs(new_sel - old_sel) * info->step_uV, + 6250); break; }

From: zhangyi (F) yi.zhang@huawei.com

[ Upstream commit 12e0613715e1cf305fffafaf0e89d810d9a85cc0 ]

block_dump is an old debugging interface, one of it's functions is used to print the information about who write which file on disk. If we enable block_dump through /proc/sys/vm/block_dump and turn on debug log level, we can gather information about write process name, target file name and disk from kernel message. This feature is realized in block_dump___mark_inode_dirty(), it print above information into kernel message directly when marking inode dirty, so it is noisy and can easily trigger log storm. At the same time, get the dentry refcount is also not safe, we found it will lead to deadlock on ext4 file system with data=journal mode.

After tracepoints has been introduced into the kernel, we got a tracepoint in __mark_inode_dirty(), which is a better replacement of block_dump___mark_inode_dirty(). The only downside is that it only trace the inode number and not a file name, but it probably doesn't matter because the original printed file name in block_dump is not accurate in some cases, and we can still find it through the inode number and device id. So this patch delete the dirting inode part of block_dump feature.

Signed-off-by: zhangyi (F) yi.zhang@huawei.com Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20210313030146.2882027-2-yi.zhang@huawei.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fs-writeback.c | 25 ------------------------- 1 file changed, 25 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 7f068330edb6..958a1bd0b5fc 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -2040,28 +2040,6 @@ int dirtytime_interval_handler(struct ctl_table *table, int write, return ret; }

-static noinline void block_dump___mark_inode_dirty(struct inode *inode) -{ - if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) { - struct dentry *dentry; - const char *name = "?"; - - dentry = d_find_alias(inode); - if (dentry) { - spin_lock(&dentry->d_lock); - name = (const char *) dentry->d_name.name; - } - printk(KERN_DEBUG - "%s(%d): dirtied inode %lu (%s) on %s\n", - current->comm, task_pid_nr(current), inode->i_ino, - name, inode->i_sb->s_id); - if (dentry) { - spin_unlock(&dentry->d_lock); - dput(dentry); - } - } -} - /** * __mark_inode_dirty - internal function * @inode: inode to mark @@ -2120,9 +2098,6 @@ void __mark_inode_dirty(struct inode *inode, int flags) (dirtytime && (inode->i_state & I_DIRTY_INODE))) return;

- if (unlikely(block_dump)) - block_dump___mark_inode_dirty(inode); - spin_lock(&inode->i_lock); if (dirtytime && (inode->i_state & I_DIRTY_INODE)) goto out_unlock_inode;

From: Richard Fitzgerald rf@opensource.cirrus.com

[ Upstream commit d327ea15a305024ef0085252fa3657bbb1ce25f5 ]

sparse generates the following warning:

include/linux/prandom.h:114:45: sparse: sparse: cast truncates bits from constant value

This is because the 64-bit seed value is manipulated and then placed in a u32, causing an implicit cast and truncation. A forced cast to u32 doesn't prevent this warning, which is reasonable because a typecast doesn't prove that truncation was expected.

Logical-AND the value with 0xffffffff to make explicit that truncation to 32-bit is intended.

Reported-by: kernel test robot lkp@intel.com Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Petr Mladek pmladek@suse.com Signed-off-by: Petr Mladek pmladek@suse.com Link: https://lore.kernel.org/r/20210525122012.6336-3-rf@opensource.cirrus.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/prandom.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/prandom.h b/include/linux/prandom.h index cc1e71334e53..e20339c78a84 100644 --- a/include/linux/prandom.h +++ b/include/linux/prandom.h @@ -93,7 +93,7 @@ static inline u32 __seed(u32 x, u32 m) */ static inline void prandom_seed_state(struct rnd_state *state, u64 seed) { - u32 i = (seed >> 32) ^ (seed << 10) ^ seed; + u32 i = ((seed >> 32) ^ (seed << 10) ^ seed) & 0xffffffffUL;

state->s1 = __seed(i, 2U); state->s2 = __seed(i, 8U);

From: Jiapeng Chong jiapeng.chong@linux.alibaba.com

[ Upstream commit 28e367127718a9cb85d615a71e152f7acee41bfc ]

The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'error'.

Eliminate the follow smatch warning:

drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard() warn: missing error code 'error'.

Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@li... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/toshiba_acpi.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 1ff95b5a429d..974d4ac78d10 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -2448,6 +2448,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)

if (!dev->info_supported && !dev->system_event_supported) { pr_warn("No hotkey query interface found\n"); + error = -EINVAL; goto err_remove_filter; }

From: Corentin Labbe clabbe@baylibre.com

[ Upstream commit 9395c58fdddd79cdd3882132cdd04e8ac7ad525f ]

Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error: DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]

This is due to dma_unmap using the wrong address.

Fixes: 0d44dc59b2b4 ("crypto: ixp4xx - Fix handling of chained sg buffers") Signed-off-by: Corentin Labbe clabbe@baylibre.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/ixp4xx_crypto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 13657105cfb9..8d0613170d57 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -334,7 +334,7 @@ static void free_buf_chain(struct device *dev, struct buffer_desc *buf,u32 phys)

buf1 = buf->next; phys1 = buf->phys_next; - dma_unmap_single(dev, buf->phys_next, buf->buf_len, buf->dir); + dma_unmap_single(dev, buf->phys_addr, buf->buf_len, buf->dir); dma_pool_free(buffer_pool, buf, phys); buf = buf1; phys = phys1;

From: Sergey Shtylyov s.shtylyov@omprussia.ru

[ Upstream commit 4a24efa16e7db02306fb5db84518bb0a7ada5a46 ]

The driver overrides the error codes returned by platform_get_irq() to -EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Switch to propagating the error code upstream, still checking/overriding IRQ0 as libata regards it as "no IRQ" (thus polling) anyway...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Signed-off-by: Sergey Shtylyov s.shtylyov@omprussia.ru Link: https://lore.kernel.org/r/105b456d-1199-f6e9-ceb7-ffc5ba551d1a@omprussia.ru Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/sata_highbank.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 8638d575b2b9..77691154d2f1 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -483,10 +483,12 @@ static int ahci_highbank_probe(struct platform_device *pdev) }

irq = platform_get_irq(pdev, 0); - if (irq <= 0) { + if (irq < 0) { dev_err(dev, "no irq\n"); - return -EINVAL; + return irq; } + if (!irq) + return -EINVAL;

hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) {

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 8edcb5049ac29aa3c8acc5ef15dd4036543d747e ]

The use of an enum named 'RST' conflicts with a #define macro named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.

The MIPS use of RST was there first (AFAICT), so change the media/i2c/ uses of RST to be named 'RSET'. 'git grep -w RSET' does not report any naming conflicts with the new name.

This fixes multiple build errors:

arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST' 356 | RST, | ^~~

../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST' 180 | RST, | ^~~

../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST' 238 | RST, | ^~~

and some others that I have trimmed.

Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver") Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor") Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor") Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: kernel test robot lkp@intel.com Cc: Shawn Guo shawnguo@kernel.org Cc: Sascha Hauer s.hauer@pengutronix.de Cc: Pengutronix Kernel Team kernel@pengutronix.de Cc: Fabio Estevam festevam@gmail.com Cc: NXP Linux Team linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Cc: Andrzej Hajda a.hajda@samsung.com Cc: Sylwester Nawrocki s.nawrocki@samsung.com Cc: Sangwook Lee sangwook.lee@linaro.org Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 6 +++--- drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +- drivers/media/i2c/s5k4ecgx.c | 10 +++++----- drivers/media/i2c/s5k5baf.c | 6 +++--- drivers/media/i2c/s5k6aa.c | 10 +++++----- 5 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index 51b26010403c..376ffa19555d 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1393,7 +1393,7 @@ static int __s5c73m3_power_on(struct s5c73m3 *state) s5c73m3_gpio_deassert(state, STBY); usleep_range(100, 200);

- s5c73m3_gpio_deassert(state, RST); + s5c73m3_gpio_deassert(state, RSET); usleep_range(50, 100);

return 0; @@ -1408,7 +1408,7 @@ static int __s5c73m3_power_off(struct s5c73m3 *state) { int i, ret;

- if (s5c73m3_gpio_assert(state, RST)) + if (s5c73m3_gpio_assert(state, RSET)) usleep_range(10, 50);

if (s5c73m3_gpio_assert(state, STBY)) @@ -1613,7 +1613,7 @@ static int s5c73m3_get_platform_data(struct s5c73m3 *state)

state->mclk_frequency = pdata->mclk_frequency; state->gpio[STBY] = pdata->gpio_stby; - state->gpio[RST] = pdata->gpio_reset; + state->gpio[RSET] = pdata->gpio_reset; return 0; }

diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h index 13aed59f0f5d..01f57055e20f 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3.h +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h @@ -361,7 +361,7 @@ struct s5c73m3_ctrls {

enum s5c73m3_gpio_id { STBY, - RST, + RSET, GPIO_NUM, };

diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c index 97084237275d..4959edcb76cd 100644 --- a/drivers/media/i2c/s5k4ecgx.c +++ b/drivers/media/i2c/s5k4ecgx.c @@ -177,7 +177,7 @@ static const char * const s5k4ecgx_supply_names[] = {

enum s5k4ecgx_gpio_id { STBY, - RST, + RSET, GPIO_NUM, };

@@ -482,7 +482,7 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv) if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level)) usleep_range(30, 50);

- if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level)) + if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level)) usleep_range(30, 50);

return 0; @@ -490,7 +490,7 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)

static int __s5k4ecgx_power_off(struct s5k4ecgx *priv) { - if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level)) + if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level)) usleep_range(30, 50);

if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level)) @@ -878,7 +878,7 @@ static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv, int ret;

priv->gpio[STBY].gpio = -EINVAL; - priv->gpio[RST].gpio = -EINVAL; + priv->gpio[RSET].gpio = -EINVAL;

ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");

@@ -897,7 +897,7 @@ static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv, s5k4ecgx_free_gpios(priv); return ret; } - priv->gpio[RST] = *gpio; + priv->gpio[RSET] = *gpio; if (gpio_is_valid(gpio->gpio)) gpio_set_value(gpio->gpio, 0);

diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c index 774e0d0c94cb..a9052219a278 100644 --- a/drivers/media/i2c/s5k5baf.c +++ b/drivers/media/i2c/s5k5baf.c @@ -238,7 +238,7 @@ struct s5k5baf_gpio {

enum s5k5baf_gpio_id { STBY, - RST, + RSET, NUM_GPIOS, };

@@ -973,7 +973,7 @@ static int s5k5baf_power_on(struct s5k5baf *state)

s5k5baf_gpio_deassert(state, STBY); usleep_range(50, 100); - s5k5baf_gpio_deassert(state, RST); + s5k5baf_gpio_deassert(state, RSET); return 0;

err_reg_dis: @@ -991,7 +991,7 @@ static int s5k5baf_power_off(struct s5k5baf *state) state->apply_cfg = 0; state->apply_crop = 0;

- s5k5baf_gpio_assert(state, RST); + s5k5baf_gpio_assert(state, RSET); s5k5baf_gpio_assert(state, STBY);

if (!IS_ERR(state->clock)) diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c index 5ac2babe123b..ca1c0568a561 100644 --- a/drivers/media/i2c/s5k6aa.c +++ b/drivers/media/i2c/s5k6aa.c @@ -181,7 +181,7 @@ static const char * const s5k6aa_supply_names[] = {

enum s5k6aa_gpio_id { STBY, - RST, + RSET, GPIO_NUM, };

@@ -845,7 +845,7 @@ static int __s5k6aa_power_on(struct s5k6aa *s5k6aa) ret = s5k6aa->s_power(1); usleep_range(4000, 4000);

- if (s5k6aa_gpio_deassert(s5k6aa, RST)) + if (s5k6aa_gpio_deassert(s5k6aa, RSET)) msleep(20);

return ret; @@ -855,7 +855,7 @@ static int __s5k6aa_power_off(struct s5k6aa *s5k6aa) { int ret;

- if (s5k6aa_gpio_assert(s5k6aa, RST)) + if (s5k6aa_gpio_assert(s5k6aa, RSET)) usleep_range(100, 150);

if (s5k6aa->s_power) { @@ -1514,7 +1514,7 @@ static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa, int ret;

s5k6aa->gpio[STBY].gpio = -EINVAL; - s5k6aa->gpio[RST].gpio = -EINVAL; + s5k6aa->gpio[RSET].gpio = -EINVAL;

gpio = &pdata->gpio_stby; if (gpio_is_valid(gpio->gpio)) { @@ -1537,7 +1537,7 @@ static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa, if (ret < 0) return ret;

- s5k6aa->gpio[RST] = *gpio; + s5k6aa->gpio[RSET] = *gpio; }

return 0;

From: Sergey Shtylyov s.shtylyov@omprussia.ru

[ Upstream commit 5c8121262484d99bffb598f39a0df445cecd8efb ]

The driver overrides the error codes returned by platform_get_irq() to -ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Propagate the error code upstream, as it should have been done from the start...

Fixes: 2fff27512600 ("PATA host controller driver for ep93xx") Signed-off-by: Sergey Shtylyov s.shtylyov@omprussia.ru Link: https://lore.kernel.org/r/509fda88-2e0d-2cc7-f411-695d7e94b136@omprussia.ru Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/pata_ep93xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index 634c814cbeda..ebdd2dfabbeb 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -927,7 +927,7 @@ static int ep93xx_pata_probe(struct platform_device *pdev) /* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */ irq = platform_get_irq(pdev, 0); if (irq < 0) { - err = -ENXIO; + err = irq; goto err_rel_gpio; }

From: Gustavo A. R. Silva gustavoars@kernel.org

[ Upstream commit 13dfead49db07225335d4f587a560a2210391a1a ]

Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of its msg_data array from 4 to 5 elements. Notice that at some point the 5th element of msg_data is being accessed in function smscore_load_firmware_family2():

1006 trigger_msg->msg_data[4] = 4; /* Task ID */

Also, there is no need for the object _trigger_msg_ of type struct sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data in struct sms_msg_data is a one-element array, which causes multiple out-of-bounds warnings when accessing beyond its first element in function smscore_load_firmware_family2():

992 struct sms_msg_data *trigger_msg = 993 (struct sms_msg_data *) msg; 994 995 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n"); 996 SMS_INIT_MSG(&msg->x_msg_header, 997 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ, 998 sizeof(struct sms_msg_hdr) + 999 sizeof(u32) * 5); 1000 1001 trigger_msg->msg_data[0] = firmware->start_address; 1002 /* Entry point */ 1003 trigger_msg->msg_data[1] = 6; /* Priority */ 1004 trigger_msg->msg_data[2] = 0x200; /* Stack size */ 1005 trigger_msg->msg_data[3] = 0; /* Parameter */ 1006 trigger_msg->msg_data[4] = 4; /* Task ID */

even when enough dynamic memory is allocated for _msg_:

929 /* PAGE_SIZE buffer shall be enough and dma aligned */ 930 msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags);

but as _msg_ is casted to (struct sms_msg_data *):

992 struct sms_msg_data *trigger_msg = 993 (struct sms_msg_data *) msg;

the out-of-bounds warnings are actually valid and should be addressed.

Fix this by declaring object _msg_ of type struct sms_msg_data5 *, which contains a 5-elements array, instead of just 4. And use _msg_ directly, instead of creating object trigger_msg.

This helps with the ongoing efforts to enable -Warray-bounds by fixing the following warnings:

CC [M] drivers/media/common/siano/smscoreapi.o drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’: drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1003 | trigger_msg->msg_data[1] = 6; /* Priority */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1005 | trigger_msg->msg_data[3] = 0; /* Parameter */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1006 | trigger_msg->msg_data[4] = 4; /* Task ID */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~

Fixes: 018b0c6f8acb ("[media] siano: make load firmware logic to work with newer firmwares") Co-developed-by: Kees Cook keescook@chromium.org Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/common/siano/smscoreapi.c | 22 +++++++++------------- drivers/media/common/siano/smscoreapi.h | 4 ++-- 2 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/media/common/siano/smscoreapi.c b/drivers/media/common/siano/smscoreapi.c index 2a8d9a36d6f0..5cc68144771c 100644 --- a/drivers/media/common/siano/smscoreapi.c +++ b/drivers/media/common/siano/smscoreapi.c @@ -914,7 +914,7 @@ static int smscore_load_firmware_family2(struct smscore_device_t *coredev, void *buffer, size_t size) { struct sms_firmware *firmware = (struct sms_firmware *) buffer; - struct sms_msg_data4 *msg; + struct sms_msg_data5 *msg; u32 mem_address, calc_checksum = 0; u32 i, *ptr; u8 *payload = firmware->payload; @@ -995,24 +995,20 @@ static int smscore_load_firmware_family2(struct smscore_device_t *coredev, goto exit_fw_download;

if (coredev->mode == DEVICE_MODE_NONE) { - struct sms_msg_data *trigger_msg = - (struct sms_msg_data *) msg; - pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n"); SMS_INIT_MSG(&msg->x_msg_header, MSG_SMS_SWDOWNLOAD_TRIGGER_REQ, - sizeof(struct sms_msg_hdr) + - sizeof(u32) * 5); + sizeof(*msg));

- trigger_msg->msg_data[0] = firmware->start_address; + msg->msg_data[0] = firmware->start_address; /* Entry point */ - trigger_msg->msg_data[1] = 6; /* Priority */ - trigger_msg->msg_data[2] = 0x200; /* Stack size */ - trigger_msg->msg_data[3] = 0; /* Parameter */ - trigger_msg->msg_data[4] = 4; /* Task ID */ + msg->msg_data[1] = 6; /* Priority */ + msg->msg_data[2] = 0x200; /* Stack size */ + msg->msg_data[3] = 0; /* Parameter */ + msg->msg_data[4] = 4; /* Task ID */

- rc = smscore_sendrequest_and_wait(coredev, trigger_msg, - trigger_msg->x_msg_header.msg_length, + rc = smscore_sendrequest_and_wait(coredev, msg, + msg->x_msg_header.msg_length, &coredev->trigger_done); } else { SMS_INIT_MSG(&msg->x_msg_header, MSG_SW_RELOAD_EXEC_REQ, diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h index 4cc39e4a8318..55d02c27f124 100644 --- a/drivers/media/common/siano/smscoreapi.h +++ b/drivers/media/common/siano/smscoreapi.h @@ -636,9 +636,9 @@ struct sms_msg_data2 { u32 msg_data[2]; };

-struct sms_msg_data4 { +struct sms_msg_data5 { struct sms_msg_hdr x_msg_header; - u32 msg_data[4]; + u32 msg_data[5]; };

struct sms_data_download {

From: Dillon Min dillon.minfei@gmail.com

[ Upstream commit 5d11e6aad1811ea293ee2996cec9124f7fccb661 ]

The m2m_ctx resources was allocated by v4l2_m2m_ctx_init() in g2d_open() should be freed from g2d_release() when it's not used.

Fix it

Fixes: 918847341af0 ("[media] v4l: add G2D driver for s5p device family") Signed-off-by: Dillon Min dillon.minfei@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/s5p-g2d/g2d.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c index 2b939555cccb..21968ef9dc45 100644 --- a/drivers/media/platform/s5p-g2d/g2d.c +++ b/drivers/media/platform/s5p-g2d/g2d.c @@ -282,6 +282,9 @@ static int g2d_release(struct file *file) struct g2d_dev *dev = video_drvdata(file); struct g2d_ctx *ctx = fh2ctx(file->private_data);

+ mutex_lock(&dev->mutex); + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); + mutex_unlock(&dev->mutex); v4l2_ctrl_handler_free(&ctx->ctrl_handler); v4l2_fh_del(&ctx->fh); v4l2_fh_exit(&ctx->fh);

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit 2a96726bd0ccde4f12b9b9a9f61f7b1ac5af7e10 ]

The function nx842_OF_upd_status triggers a sparse RCU warning when it directly dereferences the RCU-protected devdata. This appears to be an accident as there was another variable of the same name that was passed in from the caller.

After it was removed (because the main purpose of using it, to update the status member was itself removed) the global variable unintenionally stood in as its replacement.

This patch restores the devdata parameter.

Fixes: 90fd73f912f0 ("crypto: nx - remove pSeries NX 'status' field") Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/nx/nx-842-pseries.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c index 2e5b4004f0ee..1b8c87770645 100644 --- a/drivers/crypto/nx/nx-842-pseries.c +++ b/drivers/crypto/nx/nx-842-pseries.c @@ -553,13 +553,15 @@ static int nx842_OF_set_defaults(struct nx842_devdata *devdata) * The status field indicates if the device is enabled when the status * is 'okay'. Otherwise the device driver will be disabled. * - * @prop - struct property point containing the maxsyncop for the update + * @devdata: struct nx842_devdata to use for dev_info + * @prop: struct property point containing the maxsyncop for the update * * Returns: * 0 - Device is available * -ENODEV - Device is not available */ -static int nx842_OF_upd_status(struct property *prop) +static int nx842_OF_upd_status(struct nx842_devdata *devdata, + struct property *prop) { const char *status = (const char *)prop->value;

@@ -773,7 +775,7 @@ static int nx842_OF_upd(struct property *new_prop) goto out;

/* Perform property updates */ - ret = nx842_OF_upd_status(status); + ret = nx842_OF_upd_status(new_devdata, status); if (ret) goto error_out;

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 9e3617a7b84512bf96c04f9cf82d1a7257d33794 ]

If GPIO controller is not available yet we need to defer the probe of GBE until provider will become available.

While here, drop GPIOF_EXPORT because it's deprecated and may not be available.

Fixes: f1a26fdf5944 ("pch_gbe: Add MinnowBoard support") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Flavio Suligoi f.suligoi@asem.it Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 3b98b263bad0..a7ec9492d126 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -2625,9 +2625,13 @@ static int pch_gbe_probe(struct pci_dev *pdev, adapter->pdev = pdev; adapter->hw.back = adapter; adapter->hw.reg = pcim_iomap_table(pdev)[PCH_GBE_PCI_BAR]; + adapter->pdata = (struct pch_gbe_privdata *)pci_id->driver_data; - if (adapter->pdata && adapter->pdata->platform_init) - adapter->pdata->platform_init(pdev); + if (adapter->pdata && adapter->pdata->platform_init) { + ret = adapter->pdata->platform_init(pdev); + if (ret) + goto err_free_netdev; + }

adapter->ptp_pdev = pci_get_bus_and_slot(adapter->pdev->bus->number, PCI_DEVFN(12, 4)); @@ -2717,7 +2721,7 @@ err_free_netdev: */ static int pch_gbe_minnow_platform_init(struct pci_dev *pdev) { - unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT; + unsigned long flags = GPIOF_OUT_INIT_HIGH; unsigned gpio = MINNOW_PHY_RESET_GPIO; int ret;

From: Colin Ian King colin.king@canonical.com

[ Upstream commit fbbf23ddb2a1cc0c12c9f78237d1561c24006f50 ]

The object surf is not fully initialized and the uninitialized field surf.data is being copied by the call to qxl_bo_create via the call to qxl_gem_object_create. Set surf.data to zero to ensure garbage data from the stack is not being copied.

Addresses-Coverity: ("Uninitialized scalar variable") Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)") Signed-off-by: Colin Ian King colin.king@canonical.com Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.k... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/qxl/qxl_dumb.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/qxl/qxl_dumb.c b/drivers/gpu/drm/qxl/qxl_dumb.c index d34bb4130ff0..5f757328fced 100644 --- a/drivers/gpu/drm/qxl/qxl_dumb.c +++ b/drivers/gpu/drm/qxl/qxl_dumb.c @@ -57,6 +57,8 @@ int qxl_mode_dumb_create(struct drm_file *file_priv, surf.height = args->height; surf.stride = pitch; surf.format = format; + surf.data = 0; + r = qxl_gem_object_create_with_handle(qdev, file_priv, QXL_GEM_DOMAIN_VRAM, args->size, &surf, &qobj,

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 9a25344d5177c2b9285532236dc3d10a091f39a8 ]

If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()' as already done in the remove function.

Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Acked-by: Arend van Spriel arend.vanspriel@broadcom.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/8fbc171a1a493b38db5a6f0873c6021fca026a6c.162085292... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index a4e1eec96c60..e3a500fb4e3c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1221,6 +1221,7 @@ static int brcms_bcma_probe(struct bcma_device *pdev) { struct brcms_info *wl; struct ieee80211_hw *hw; + int ret;

dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, @@ -1245,11 +1246,16 @@ static int brcms_bcma_probe(struct bcma_device *pdev) wl = brcms_attach(pdev); if (!wl) { pr_err("%s: brcms_attach failed!\n", __func__); - return -ENODEV; + ret = -ENODEV; + goto err_free_ieee80211; } brcms_led_register(wl);

return 0; + +err_free_ieee80211: + ieee80211_free_hw(hw); + return ret; }

static int brcms_suspend(struct bcma_device *pdev)

From: Liu Shixin liushixin2@huawei.com

[ Upstream commit b8f6b0522c298ae9267bd6584e19b942a0636910 ]

Hulk Robot reported memory leak in netlbl_mgmt_add_common. The problem is non-freed map in case of netlbl_domhsh_add() failed.

BUG: memory leak unreferenced object 0xffff888100ab7080 (size 96): comm "syz-executor537", pid 360, jiffies 4294862456 (age 22.678s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 ................ backtrace: [<0000000008b40026>] netlbl_mgmt_add_common.isra.0+0xb2a/0x1b40 [<000000003be10950>] netlbl_mgmt_add+0x271/0x3c0 [<00000000c70487ed>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 [<000000001f2ff614>] genl_rcv_msg+0x2bf/0x4f0 [<0000000089045792>] netlink_rcv_skb+0x134/0x3d0 [<0000000020e96fdd>] genl_rcv+0x24/0x40 [<0000000042810c66>] netlink_unicast+0x4a0/0x6a0 [<000000002e1659f0>] netlink_sendmsg+0x789/0xc70 [<000000006e43415f>] sock_sendmsg+0x139/0x170 [<00000000680a73d7>] ____sys_sendmsg+0x658/0x7d0 [<0000000065cbb8af>] ___sys_sendmsg+0xf8/0x170 [<0000000019932b6c>] __sys_sendmsg+0xd3/0x190 [<00000000643ac172>] do_syscall_64+0x37/0x90 [<000000009b79d6dc>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Liu Shixin liushixin2@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/netlabel/netlabel_mgmt.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c index 13f777f20995..5f1218dc9162 100644 --- a/net/netlabel/netlabel_mgmt.c +++ b/net/netlabel/netlabel_mgmt.c @@ -92,6 +92,7 @@ static const struct nla_policy netlbl_mgmt_genl_policy[NLBL_MGMT_A_MAX + 1] = { static int netlbl_mgmt_add_common(struct genl_info *info, struct netlbl_audit *audit_info) { + void *pmap = NULL; int ret_val = -EINVAL; struct netlbl_domaddr_map *addrmap = NULL; struct cipso_v4_doi *cipsov4 = NULL; @@ -165,6 +166,7 @@ static int netlbl_mgmt_add_common(struct genl_info *info, ret_val = -ENOMEM; goto add_free_addrmap; } + pmap = map; map->list.addr = addr->s_addr & mask->s_addr; map->list.mask = mask->s_addr; map->list.valid = 1; @@ -173,10 +175,8 @@ static int netlbl_mgmt_add_common(struct genl_info *info, map->def.cipso = cipsov4;

ret_val = netlbl_af4list_add(&map->list, &addrmap->list4); - if (ret_val != 0) { - kfree(map); - goto add_free_addrmap; - } + if (ret_val != 0) + goto add_free_map;

entry->def.type = NETLBL_NLTYPE_ADDRSELECT; entry->def.addrsel = addrmap; @@ -212,6 +212,7 @@ static int netlbl_mgmt_add_common(struct genl_info *info, ret_val = -ENOMEM; goto add_free_addrmap; } + pmap = map; map->list.addr = *addr; map->list.addr.s6_addr32[0] &= mask->s6_addr32[0]; map->list.addr.s6_addr32[1] &= mask->s6_addr32[1]; @@ -222,10 +223,8 @@ static int netlbl_mgmt_add_common(struct genl_info *info, map->def.type = entry->def.type;

ret_val = netlbl_af6list_add(&map->list, &addrmap->list6); - if (ret_val != 0) { - kfree(map); - goto add_free_addrmap; - } + if (ret_val != 0) + goto add_free_map;

entry->def.type = NETLBL_NLTYPE_ADDRSELECT; entry->def.addrsel = addrmap; @@ -234,10 +233,12 @@ static int netlbl_mgmt_add_common(struct genl_info *info,

ret_val = netlbl_domhsh_add(entry, audit_info); if (ret_val != 0) - goto add_free_addrmap; + goto add_free_map;

return 0;

+add_free_map: + kfree(pmap); add_free_addrmap: kfree(addrmap); add_doi_put_def:

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit e3a5de6d81d8b2199935c7eb3f7d17a50a7075b7 ]

static int greth_of_remove(struct platform_device *of_dev) { ... struct greth_private *greth = netdev_priv(ndev); ... unregister_netdev(ndev); free_netdev(ndev);

of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0])); ... }

greth is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing greth pointer. So, fix it by moving free_netdev() after of_iounmap() call.

Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/aeroflex/greth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c index 20bf55dbd76f..e3ca8abb14f4 100644 --- a/drivers/net/ethernet/aeroflex/greth.c +++ b/drivers/net/ethernet/aeroflex/greth.c @@ -1579,10 +1579,11 @@ static int greth_of_remove(struct platform_device *of_dev) mdiobus_unregister(greth->mdio);

unregister_netdev(ndev); - free_netdev(ndev);

of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));

+ free_netdev(ndev); + return 0; }

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit 0de449d599594f5472e00267d651615c7f2c6c1d ]

As documented at drivers/base/platform.c for platform_get_irq:

* Gets an IRQ for a platform device and prints an error message if finding the * IRQ fails. Device drivers should check the return value for errors so as to * not pass a negative integer value to the request_irq() APIs.

So, the driver should check that platform_get_irq() return value is _negative_, not that it's equal to zero, because -ENXIO (return value from request_irq() if irq was not found) will pass this check and it leads to passing negative irq to request_irq()

Fixes: 0dd077093636 ("NET: Add ezchip ethernet driver") Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/ezchip/nps_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c index 73d2bc349b2f..2cb20d8e6bdf 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.c +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -586,7 +586,7 @@ static s32 nps_enet_probe(struct platform_device *pdev)

/* Get IRQ number */ priv->irq = platform_get_irq(pdev, 0); - if (!priv->irq) { + if (priv->irq < 0) { dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n"); err = -ENODEV; goto out_netdev;

From: Dinghao Liu dinghao.liu@zju.edu.cn

[ Upstream commit 9c04cfcd4aad232e36306cdc5c74cd9fc9148a7e ]

When vsi->type == I40E_VSI_FDIR, we have caught the return value of i40e_vsi_request_irq() but without further handling. Check and execute memory clean on failure just like the other i40e_vsi_request_irq().

Fixes: 8a9eb7d3cbcab ("i40e: rework fdir setup and teardown") Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Tested-by: Tony Brelinski tonyx.brelinski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 8bdc17658f3f..d6d4faa5c542 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5409,6 +5409,8 @@ int i40e_vsi_open(struct i40e_vsi *vsi) dev_driver_string(&pf->pdev->dev), dev_name(&pf->pdev->dev)); err = i40e_vsi_request_irq(vsi, int_name); + if (err) + goto err_setup_rx;

} else { err = -EINVAL;

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 31a9a318255960d32ae183e95d0999daf2418608 ]

A 'request_irq()' call is not balanced by a corresponding 'free_irq()' in the error handling path, as already done in the remove function.

Add it.

Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result") Reviewed-by: Jiri Slaby jirislaby@kernel.org Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/4f0d2b3038e82f081d370ccb0cade3ad88463fe7.162058083... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/nozomi.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 5cc80b80c82b..880cfc780e67 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1479,6 +1479,7 @@ err_free_tty: tty_unregister_device(ntty_driver, dc->index_start + i); tty_port_destroy(&dc->port[i].port); } + free_irq(pdev->irq, dc); err_free_kfifo: for (i = 0; i < MAX_PORT; i++) kfifo_free(&dc->port[i].fifo_ul);

From: Jonathan Cameron Jonathan.Cameron@huawei.com

[ Upstream commit fc36da3131a747a9367a05caf06de19be1bcc972 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: b9a6a237ffc9 ("iio:bma180: Drop _update_scan_mode()") Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Cc: Peter Meerwald pmeerw@pmeerw.net Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20210501170121.512209-2-jic23@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/bma180.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index f04b88406995..68c9e5478fec 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -120,7 +120,11 @@ struct bma180_data { int scale; int bw; bool pmode; - u8 buff[16]; /* 3x 16-bit + 8-bit + padding + timestamp */ + /* Ensure timestamp is naturally aligned */ + struct { + s16 chan[4]; + s64 timestamp __aligned(8); + } scan; };

enum bma180_chan { @@ -666,12 +670,12 @@ static irqreturn_t bma180_trigger_handler(int irq, void *p) mutex_unlock(&data->mutex); goto err; } - ((s16 *)data->buff)[i++] = ret; + data->scan.chan[i++] = ret; }

mutex_unlock(&data->mutex);

- iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns); + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, time_ns); err: iio_trigger_notify_done(indio_dev->trig);

From: Jonathan Cameron Jonathan.Cameron@huawei.com

[ Upstream commit 334883894bc1e145a1e0f5de1b0d1b6a1133f0e6 ]

To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: db6a19b8251f ("iio: accel: Add trigger support for STK8BA50") Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20210501170121.512209-8-jic23@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/stk8ba50.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/accel/stk8ba50.c b/drivers/iio/accel/stk8ba50.c index 5709d9eb8f34..b6e2d15024c8 100644 --- a/drivers/iio/accel/stk8ba50.c +++ b/drivers/iio/accel/stk8ba50.c @@ -95,12 +95,11 @@ struct stk8ba50_data { u8 sample_rate_idx; struct iio_trigger *dready_trig; bool dready_trigger_on; - /* - * 3 x 16-bit channels (10-bit data, 6-bit padding) + - * 1 x 16 padding + - * 4 x 16 64-bit timestamp - */ - s16 buffer[8]; + /* Ensure timestamp is naturally aligned */ + struct { + s16 chans[3]; + s64 timetamp __aligned(8); + } scan; };

#define STK8BA50_ACCEL_CHANNEL(index, reg, axis) { \ @@ -330,7 +329,7 @@ static irqreturn_t stk8ba50_trigger_handler(int irq, void *p) ret = i2c_smbus_read_i2c_block_data(data->client, STK8BA50_REG_XOUT, STK8BA50_ALL_CHANNEL_SIZE, - (u8 *)data->buffer); + (u8 *)data->scan.chans); if (ret < STK8BA50_ALL_CHANNEL_SIZE) { dev_err(&data->client->dev, "register read failed\n"); goto err; @@ -343,10 +342,10 @@ static irqreturn_t stk8ba50_trigger_handler(int irq, void *p) if (ret < 0) goto err;

- data->buffer[i++] = ret; + data->scan.chans[i++] = ret; } } - iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, pf->timestamp); err: mutex_unlock(&data->lock);

From: Yu Kuai yukuai3@huawei.com

[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ]

Theoretically, it will cause index out of bounds error if 'num_bytes_read' is greater than 4. As we expect it(and was tested) never to be greater than 4, error out if it happens.

Fixes: c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver") Signed-off-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/20210521120617.138396-1-yukuai3@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/pcmcia/cm4000_cs.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index c115217c79ae..f8d98f7e6fb7 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -544,6 +544,10 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq) io_read_num_rec_bytes(iobase, &num_bytes_read); if (num_bytes_read >= 4) { DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read); + if (num_bytes_read > 4) { + rc = -EIO; + goto exit_setprotocol; + } break; } mdelay(10);

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ]

The BusLogic driver has build errors on ia64 due to a name collision (in the #included FlashPoint.c file). Rename the struct field in struct sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.

This is the first problem. There are 50+ others after this one:

In file included from ../include/uapi/linux/signal.h:6, from ../include/linux/signal_types.h:10, from ../include/linux/sched.h:29, from ../include/linux/hardirq.h:9, from ../include/linux/interrupt.h:11, from ../drivers/scsi/BusLogic.c:27: ../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token 15 | #define si_flags _sifields._sigfault._flags | ^ ../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags' 43 | u16 si_flags; | ^~~~~~~~ In file included from ../drivers/scsi/BusLogic.c:51: ../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter': ../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields' 1076 | pCardInfo->si_flags = 0x0000; | ^~ ../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'

Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.") Cc: "James E.J. Bottomley" jejb@linux.ibm.com Cc: "Martin K. Petersen" martin.petersen@oracle.com Cc: Christoph Hellwig hch@lst.de Cc: Jens Axboe axboe@kernel.dk Cc: Hannes Reinecke hare@suse.de Cc: Khalid Aziz khalid.aziz@oracle.com Cc: Khalid Aziz khalid@gonehiking.org Reported-by: kernel test robot lkp@intel.com Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/FlashPoint.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c index 867b864f5047..4bca37d52bad 100644 --- a/drivers/scsi/FlashPoint.c +++ b/drivers/scsi/FlashPoint.c @@ -40,7 +40,7 @@ struct sccb_mgr_info { u16 si_per_targ_ultra_nego; u16 si_per_targ_no_disc; u16 si_per_targ_wide_nego; - u16 si_flags; + u16 si_mflags; unsigned char si_card_family; unsigned char si_bustype; unsigned char si_card_model[3]; @@ -1070,22 +1070,22 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo) ScamFlg = (unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);

- pCardInfo->si_flags = 0x0000; + pCardInfo->si_mflags = 0x0000;

if (i & 0x01) - pCardInfo->si_flags |= SCSI_PARITY_ENA; + pCardInfo->si_mflags |= SCSI_PARITY_ENA;

if (!(i & 0x02)) - pCardInfo->si_flags |= SOFT_RESET; + pCardInfo->si_mflags |= SOFT_RESET;

if (i & 0x10) - pCardInfo->si_flags |= EXTENDED_TRANSLATION; + pCardInfo->si_mflags |= EXTENDED_TRANSLATION;

if (ScamFlg & SCAM_ENABLED) - pCardInfo->si_flags |= FLAG_SCAM_ENABLED; + pCardInfo->si_mflags |= FLAG_SCAM_ENABLED;

if (ScamFlg & SCAM_LEVEL2) - pCardInfo->si_flags |= FLAG_SCAM_LEVEL2; + pCardInfo->si_mflags |= FLAG_SCAM_LEVEL2;

j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L); if (i & 0x04) { @@ -1101,7 +1101,7 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)

if (!(RD_HARPOON(ioport + hp_page_ctrl) & NARROW_SCSI_CARD))

- pCardInfo->si_flags |= SUPPORT_16TAR_32LUN; + pCardInfo->si_mflags |= SUPPORT_16TAR_32LUN;

pCardInfo->si_card_family = HARPOON_FAMILY; pCardInfo->si_bustype = BUSTYPE_PCI; @@ -1137,15 +1137,15 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)

if (pCardInfo->si_card_model[1] == '3') { if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7)) - pCardInfo->si_flags |= LOW_BYTE_TERM; + pCardInfo->si_mflags |= LOW_BYTE_TERM; } else if (pCardInfo->si_card_model[2] == '0') { temp = RD_HARPOON(ioport + hp_xfer_pad); WR_HARPOON(ioport + hp_xfer_pad, (temp & ~BIT(4))); if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7)) - pCardInfo->si_flags |= LOW_BYTE_TERM; + pCardInfo->si_mflags |= LOW_BYTE_TERM; WR_HARPOON(ioport + hp_xfer_pad, (temp | BIT(4))); if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7)) - pCardInfo->si_flags |= HIGH_BYTE_TERM; + pCardInfo->si_mflags |= HIGH_BYTE_TERM; WR_HARPOON(ioport + hp_xfer_pad, temp); } else { temp = RD_HARPOON(ioport + hp_ee_ctrl); @@ -1163,9 +1163,9 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo) WR_HARPOON(ioport + hp_ee_ctrl, temp); WR_HARPOON(ioport + hp_xfer_pad, temp2); if (!(temp3 & BIT(7))) - pCardInfo->si_flags |= LOW_BYTE_TERM; + pCardInfo->si_mflags |= LOW_BYTE_TERM; if (!(temp3 & BIT(6))) - pCardInfo->si_flags |= HIGH_BYTE_TERM; + pCardInfo->si_mflags |= HIGH_BYTE_TERM; }

ARAM_ACCESS(ioport); @@ -1272,7 +1272,7 @@ static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info WR_HARPOON(ioport + hp_arb_id, pCardInfo->si_id); CurrCard->ourId = pCardInfo->si_id;

- i = (unsigned char)pCardInfo->si_flags; + i = (unsigned char)pCardInfo->si_mflags; if (i & SCSI_PARITY_ENA) WR_HARPOON(ioport + hp_portctrl_1, (HOST_MODE8 | CHK_SCSI_P));

@@ -1286,14 +1286,14 @@ static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info j |= SCSI_TERM_ENA_H; WR_HARPOON(ioport + hp_ee_ctrl, j);

- if (!(pCardInfo->si_flags & SOFT_RESET)) { + if (!(pCardInfo->si_mflags & SOFT_RESET)) {

FPT_sresb(ioport, thisCard);

FPT_scini(thisCard, pCardInfo->si_id, 0); }

- if (pCardInfo->si_flags & POST_ALL_UNDERRRUNS) + if (pCardInfo->si_mflags & POST_ALL_UNDERRRUNS) CurrCard->globalFlags |= F_NO_FILTER;

if (pCurrNvRam) {

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 4a36e160856db8a8ddd6a3d2e5db5a850ab87f82 ]

There needs to be a check to verify that we don't read beyond the end of "buf". This function is called from do_rx(). The "buf" is the USB transfer_buffer and "len" is "urb->actual_length".

Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/YMcnl4zCwGWGDVMG@mwanda Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/gdm724x/gdm_lte.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/gdm724x/gdm_lte.c b/drivers/staging/gdm724x/gdm_lte.c index 79de678807cc..1eacf82d1bd0 100644 --- a/drivers/staging/gdm724x/gdm_lte.c +++ b/drivers/staging/gdm724x/gdm_lte.c @@ -689,6 +689,7 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len) struct multi_sdu *multi_sdu = (struct multi_sdu *)buf; struct sdu *sdu = NULL; u8 *data = (u8 *)multi_sdu->data; + int copied; u16 i = 0; u16 num_packet; u16 hci_len; @@ -702,6 +703,12 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len) multi_sdu->num_packet);

for (i = 0; i < num_packet; i++) { + copied = data - multi_sdu->data; + if (len < copied + sizeof(*sdu)) { + pr_err("rx prevent buffer overflow"); + return; + } + sdu = (struct sdu *)data;

cmd_evt = gdm_dev16_to_cpu(phy_dev-> @@ -715,7 +722,8 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len) pr_err("rx sdu wrong hci %04x\n", cmd_evt); return; } - if (hci_len < 12) { + if (hci_len < 12 || + len < copied + sizeof(*sdu) + (hci_len - 12)) { pr_err("rx sdu invalid len %d\n", hci_len); return; }

From: Zhen Lei thunder.leizhen@huawei.com

[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ]

When an expander does not contain any 'phys', an appropriate error code -1 should be returned, as done elsewhere in this function. However, we currently do not explicitly assign this error code to 'rc'. As a result, 0 was incorrectly returned.

Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 8735e4257028..49b751a8f5f3 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -5014,8 +5014,10 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) handle, parent_handle, (unsigned long long) sas_expander->sas_address, sas_expander->num_phys);

- if (!sas_expander->num_phys) + if (!sas_expander->num_phys) { + rc = -1; goto out_fail; + } sas_expander->phy = kcalloc(sas_expander->num_phys, sizeof(struct _sas_phy), GFP_KERNEL); if (!sas_expander->phy) {

From: Stephan Gerhold stephan@gerhold.net

[ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ]

When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data.

Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense.

Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver") Signed-off-by: Stephan Gerhold stephan@gerhold.net Signed-off-by: Chanwoo Choi cw00.choi@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/extcon/extcon-sm5502.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index f63f9961ac12..9b8c79bc3acd 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -92,7 +92,6 @@ static struct reg_data sm5502_reg_data[] = { | SM5502_REG_INTM2_MHL_MASK, .invert = true, }, - { } };

/* List of detectable cables */

From: Johan Hovold johan@kernel.org

commit 3c0bb3107703d2c58f7a0a7a2060bb57bc120326 upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Fix the SET_ROM_WAIT_STATES request which erroneously used usb_rcvctrlpipe().

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/mmc/host/vub300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2294,7 +2294,7 @@ static int vub300_probe(struct usb_inter if (retval < 0) goto error5; retval = - usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), + usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), SET_ROM_WAIT_STATES, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, firmware_rom_wait_states, 0x0000, NULL, 0, HZ);

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]

Sparse is not happy about handling of strict types in pch_ptp_match():

.../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types) .../pch_gbe_main.c:158:33: expected unsigned short [usertype] uid_hi .../pch_gbe_main.c:158:33: got restricted __be16 [usertype] .../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types) .../pch_gbe_main.c:158:45: expected unsigned int [usertype] uid_lo .../pch_gbe_main.c:158:45: got restricted __be32 [usertype] .../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types) .../pch_gbe_main.c:158:56: expected unsigned short [usertype] seqid .../pch_gbe_main.c:158:56: got restricted __be16 [usertype]

Fix that by switching to use proper accessors to BE data.

Reported-by: kernel test robot lkp@intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Flavio Suligoi f.suligoi@asem.it Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index a7ec9492d126..45cfb1a0933d 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -124,7 +124,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) { u8 *data = skb->data; unsigned int offset; - u16 *hi, *id; + u16 hi, id; u32 lo;

if (ptp_classify_raw(skb) == PTP_CLASS_NONE) @@ -135,14 +135,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid)) return 0;

- hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID); - id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID); + hi = get_unaligned_be16(data + offset + OFF_PTP_SOURCE_UUID + 0); + lo = get_unaligned_be32(data + offset + OFF_PTP_SOURCE_UUID + 2); + id = get_unaligned_be16(data + offset + OFF_PTP_SEQUENCE_ID);

- memcpy(&lo, &hi[1], sizeof(lo)); - - return (uid_hi == *hi && - uid_lo == lo && - seqid == *id); + return (uid_hi == hi && uid_lo == lo && seqid == id); }

static void @@ -152,7 +149,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb) struct pci_dev *pdev; u64 ns; u32 hi, lo, val; - u16 uid, seq;

if (!adapter->hwts_rx_en) return; @@ -168,10 +164,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb) lo = pch_src_uuid_lo_read(pdev); hi = pch_src_uuid_hi_read(pdev);

- uid = hi & 0xffff; - seq = (hi >> 16) & 0xffff; - - if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq))) + if (!pch_ptp_match(skb, hi, lo, hi >> 16)) goto out;

ns = pch_rx_snap_read(pdev);

From: Zou Wei zou_wei@huawei.com

[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]

This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 860a33a90ebf..dc1b7f11e6af 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -3296,7 +3296,7 @@ static void __exit ia_module_exit(void) { pci_unregister_driver(&ia_driver);

- del_timer(&ia_timer); + del_timer_sync(&ia_timer); }

module_init(ia_module_init);

From: Zou Wei zou_wei@huawei.com

[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]

This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/nicstar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 49da83f87170..486d7a114031 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -298,7 +298,7 @@ static void __exit nicstar_cleanup(void) { XPRINTK("nicstar: nicstar_cleanup() called.\n");

- del_timer(&ns_timer); + del_timer_sync(&ns_timer);

pci_unregister_driver(&nicstar_driver);

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]

syzbot reported divide error in reiserfs. The problem was in incorrect journal 1st block.

Syzbot's reproducer manualy generated wrong superblock with incorrect 1st block. In journal_init() wasn't any checks about this particular case.

For example, if 1st journal block is before superblock 1st block, it can cause zeroing important superblock members in do_journal_end().

Link: https://lore.kernel.org/r/20210517121545.29645-1-paskripkin@gmail.com Reported-by: syzbot+0ba9909df31c6a36974d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/reiserfs/journal.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)

diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 00985f9db9f7..6a0fa0cdc1ed 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2770,6 +2770,20 @@ int journal_init(struct super_block *sb, const char *j_dev_name, goto free_and_return; }

+ /* + * Sanity check to see if journal first block is correct. + * If journal first block is invalid it can cause + * zeroing important superblock members. + */ + if (!SB_ONDISK_JOURNAL_DEVICE(sb) && + SB_ONDISK_JOURNAL_1st_BLOCK(sb) < SB_JOURNAL_1st_RESERVED_BLOCK(sb)) { + reiserfs_warning(sb, "journal-1393", + "journal 1st super block is invalid: 1st reserved block %d, but actual 1st block is %d", + SB_JOURNAL_1st_RESERVED_BLOCK(sb), + SB_ONDISK_JOURNAL_1st_BLOCK(sb)); + goto free_and_return; + } + if (journal_init_dev(sb, journal, j_dev_name) != 0) { reiserfs_warning(sb, "sh-462", "unable to initialize journal device");

From: Arturo Giusti koredump@protonmail.com

[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]

In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails.

This fix adds a check to validate the value of epos.bh.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083 Signed-off-by: Arturo Giusti koredump@protonmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/udf/namei.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/fs/udf/namei.c b/fs/udf/namei.c index f34c545f4e54..074560ad190e 100644 --- a/fs/udf/namei.c +++ b/fs/udf/namei.c @@ -945,6 +945,10 @@ static int udf_symlink(struct inode *dir, struct dentry *dentry, iinfo->i_location.partitionReferenceNum, 0); epos.bh = udf_tgetblk(sb, block); + if (unlikely(!epos.bh)) { + err = -ENOMEM; + goto out_no_entry; + } lock_buffer(epos.bh); memset(epos.bh->b_data, 0x00, bsize); set_buffer_uptodate(epos.bh);

From: Willy Tarreau w@1wt.eu

[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]

This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash table for IP ID generation"), but focusing on some specific aspects of IPv6.

Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a minimum MTU of 1280, it's much less easy to force a remote peer to produce many fragments to explore its ID sequence. In addition packet IDs are 32-bit in IPv6, which further complicates their analysis. On the other hand, it is often easier to choose among plenty of possible source addresses and partially work around the bigger hash table the commit above permits, which leaves IPv6 partially exposed to some possibilities of remote analysis at the risk of weakening some protocols like DNS if some IDs can be predicted with a good enough probability.

Given the wide range of permitted IDs, the risk of collision is extremely low so there's no need to rely on the positive increment algorithm that is shared with the IPv4 code via ip_idents_reserve(). We have a fast PRNG, so let's simply call prandom_u32() and be done with it.

Performance measurements at 10 Gbps couldn't show any difference with the previous code, even when using a single core, because due to the large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost of the random generation is completely offset by other operations and by the network transfer time. In addition, this change removes the need to update a shared entry in the idents table so it may even end up being slightly faster on large scale systems where this matters.

The risk of at least one collision here is about 1/80 million among 10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs, which remains very low compared to IPv4 where all IDs are reused every 4 to 80ms on a 10 Gbps flow depending on packet sizes.

Reported-by: Amit Klein aksecurity@gmail.com Signed-off-by: Willy Tarreau w@1wt.eu Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/output_core.c | 28 +++++----------------------- 1 file changed, 5 insertions(+), 23 deletions(-)

diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c index 6b896cc9604e..e2de4b0479f6 100644 --- a/net/ipv6/output_core.c +++ b/net/ipv6/output_core.c @@ -14,29 +14,11 @@ static u32 __ipv6_select_ident(struct net *net, const struct in6_addr *dst, const struct in6_addr *src) { - const struct { - struct in6_addr dst; - struct in6_addr src; - } __aligned(SIPHASH_ALIGNMENT) combined = { - .dst = *dst, - .src = *src, - }; - u32 hash, id; - - /* Note the following code is not safe, but this is okay. */ - if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key))) - get_random_bytes(&net->ipv4.ip_id_key, - sizeof(net->ipv4.ip_id_key)); - - hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key); - - /* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve, - * set the hight order instead thus minimizing possible future - * collisions. - */ - id = ip_idents_reserve(hash, 1); - if (unlikely(!id)) - id = 1 << 31; + u32 id; + + do { + id = prandom_u32(); + } while (!id);

return id; }

From: Joe Thornber ejt@redhat.com

[ Upstream commit 5faafc77f7de69147d1e818026b9a0cbf036a7b2 ]

Current commit code resets the place where the search for free blocks will begin back to the start of the metadata device. There are a couple of repercussions to this:

- The first allocation after the commit is likely to take longer than normal as it searches for a free block in an area that is likely to have very few free blocks (if any).

- Any free blocks it finds will have been recently freed. Reusing them means we have fewer old copies of the metadata to aid recovery from hardware error.

Fix these issues by leaving the cursor alone, only resetting when the search hits the end of the metadata device.

Signed-off-by: Joe Thornber ejt@redhat.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/persistent-data/dm-space-map-disk.c | 9 ++++++++- drivers/md/persistent-data/dm-space-map-metadata.c | 9 ++++++++- 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c index bf4c5e2ccb6f..e0acae7a3815 100644 --- a/drivers/md/persistent-data/dm-space-map-disk.c +++ b/drivers/md/persistent-data/dm-space-map-disk.c @@ -171,6 +171,14 @@ static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b) * Any block we allocate has to be free in both the old and current ll. */ r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, smd->begin, smd->ll.nr_blocks, b); + if (r == -ENOSPC) { + /* + * There's no free block between smd->begin and the end of the metadata device. + * We search before smd->begin in case something has been freed. + */ + r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, 0, smd->begin, b); + } + if (r) return r;

@@ -199,7 +207,6 @@ static int sm_disk_commit(struct dm_space_map *sm) return r;

memcpy(&smd->old_ll, &smd->ll, sizeof(smd->old_ll)); - smd->begin = 0; smd->nr_allocated_this_transaction = 0;

r = sm_disk_get_nr_free(sm, &nr_free); diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c index 967d8f2a731f..62a4d7da9bd9 100644 --- a/drivers/md/persistent-data/dm-space-map-metadata.c +++ b/drivers/md/persistent-data/dm-space-map-metadata.c @@ -451,6 +451,14 @@ static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b) * Any block we allocate has to be free in both the old and current ll. */ r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, smm->begin, smm->ll.nr_blocks, b); + if (r == -ENOSPC) { + /* + * There's no free block between smm->begin and the end of the metadata device. + * We search before smm->begin in case something has been freed. + */ + r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, 0, smm->begin, b); + } + if (r) return r;

@@ -502,7 +510,6 @@ static int sm_metadata_commit(struct dm_space_map *sm) return r;

memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll)); - smm->begin = 0; smm->allocated_this_transaction = 0;

return 0;

From: Minchan Kim minchan@kernel.org

[ Upstream commit 648f2c6100cfa18e7dfe43bc0b9c3b73560d623c ]

In the field, we have seen lots of allocation failure from the call path below.

06-03 13:29:12.999 1010315 31557 31557 W Binder : 31542_2: page allocation failure: order:0, mode:0x800(GFP_NOWAIT), nodemask=(null),cpuset=background,mems_allowed=0 ... ... 06-03 13:29:12.999 1010315 31557 31557 W Call trace: 06-03 13:29:12.999 1010315 31557 31557 W : dump_backtrace.cfi_jt+0x0/0x8 06-03 13:29:12.999 1010315 31557 31557 W : dump_stack+0xc8/0x14c 06-03 13:29:12.999 1010315 31557 31557 W : warn_alloc+0x158/0x1c8 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_slowpath+0x9d8/0xb80 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_nodemask+0x1c4/0x430 06-03 13:29:12.999 1010315 31557 31557 W : allocate_slab+0xb4/0x390 06-03 13:29:12.999 1010315 31557 31557 W : ___slab_alloc+0x12c/0x3a4 06-03 13:29:12.999 1010315 31557 31557 W : kmem_cache_alloc+0x358/0x5e4 06-03 13:29:12.999 1010315 31557 31557 W : avc_alloc_node+0x30/0x184 06-03 13:29:12.999 1010315 31557 31557 W : avc_update_node+0x54/0x4f0 06-03 13:29:12.999 1010315 31557 31557 W : avc_has_extended_perms+0x1a4/0x460 06-03 13:29:12.999 1010315 31557 31557 W : selinux_file_ioctl+0x320/0x3d0 06-03 13:29:12.999 1010315 31557 31557 W : __arm64_sys_ioctl+0xec/0x1fc 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc_common+0xc0/0x24c 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc+0x28/0x88 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync_handler+0x8c/0xf0 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync+0x1a4/0x1c0 .. .. 06-03 13:29:12.999 1010315 31557 31557 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010315 31557 31557 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010315 31557 31557 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 10230 30892 30892 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0

Based on [1], selinux is tolerate for failure of memory allocation. Then, use __GFP_NOWARN together.

[1] 476accbe2f6e ("selinux: use GFP_NOWAIT in the AVC kmem_caches")

Signed-off-by: Minchan Kim minchan@kernel.org [PM: subj fix, line wraps, normalized commit refs] Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/selinux/avc.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/security/selinux/avc.c b/security/selinux/avc.c index f3c473791b69..a16c72c2a967 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -348,26 +348,27 @@ static struct avc_xperms_decision_node struct avc_xperms_decision_node *xpd_node; struct extended_perms_decision *xpd;

- xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep, GFP_NOWAIT); + xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep, + GFP_NOWAIT | __GFP_NOWARN); if (!xpd_node) return NULL;

xpd = &xpd_node->xpd; if (which & XPERMS_ALLOWED) { xpd->allowed = kmem_cache_zalloc(avc_xperms_data_cachep, - GFP_NOWAIT); + GFP_NOWAIT | __GFP_NOWARN); if (!xpd->allowed) goto error; } if (which & XPERMS_AUDITALLOW) { xpd->auditallow = kmem_cache_zalloc(avc_xperms_data_cachep, - GFP_NOWAIT); + GFP_NOWAIT | __GFP_NOWARN); if (!xpd->auditallow) goto error; } if (which & XPERMS_DONTAUDIT) { xpd->dontaudit = kmem_cache_zalloc(avc_xperms_data_cachep, - GFP_NOWAIT); + GFP_NOWAIT | __GFP_NOWARN); if (!xpd->dontaudit) goto error; } @@ -395,7 +396,7 @@ static struct avc_xperms_node *avc_xperms_alloc(void) { struct avc_xperms_node *xp_node;

- xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT); + xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT | __GFP_NOWARN); if (!xp_node) return xp_node; INIT_LIST_HEAD(&xp_node->xpd_head); @@ -548,7 +549,7 @@ static struct avc_node *avc_alloc_node(void) { struct avc_node *node;

- node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT); + node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT | __GFP_NOWARN); if (!node) goto out;

From: Tony Lindgren tony@atomide.com

[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]

At least on wl12xx, reading the MAC after boot can fail with a warning at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read. The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls after request_firmware_work_func().

After the error, no wireless interface is created. Reloading the wl12xx module makes the interface work.

Turns out the wlan controller can be in a low-power ELP state after the boot from the bootloader or kexec, and needs to be woken up first.

Let's wake the hardware and add a sleep after that similar to wl12xx_pre_boot() is already doing.

Note that a similar issue could exist for wl18xx, but I have not seen it so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not produce similar errors.

Cc: Carl Philipp Klemm philipp@uvos.xyz Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index e4b28d37046a..c453a634d769 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1515,6 +1515,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl) u32 mac1, mac2; int ret;

+ /* Device may be in ELP from the bootloader or kexec */ + ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + if (ret < 0) + goto out; + + usleep_range(500000, 700000); + ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]); if (ret < 0) goto out;

From: Zou Wei zou_wei@huawei.com

[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1620788714-14300-1-git-send-email-zou_wei@huawei.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/cw1200/cw1200_sdio.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c index d3acc85932a5..de92107549ee 100644 --- a/drivers/net/wireless/cw1200/cw1200_sdio.c +++ b/drivers/net/wireless/cw1200/cw1200_sdio.c @@ -62,6 +62,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = { { SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) }, { /* end: all zeroes */ }, }; +MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);

/* hwbus_ops implemetation */

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]

Because the error handling is sequential, the application of resources should be carried out in the order of error handling, so the operation of registering the interrupt handler should be put in front, so as not to free the unregistered interrupt handler during error handling.

This log reveals it:

[ 3.438724] Trying to free already-free IRQ 23 [ 3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480 [ 3.440039] Modules linked in: [ 3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.441561] RIP: 0010:free_irq+0xfb/0x480 [ 3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] FS: 0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000 [ 3.444994] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.444994] Call Trace: [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Kernel panic - not syncing: panic_on_warn set ... [ 3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.444994] Call Trace: [ 3.444994] dump_stack+0xba/0xf5 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] panic+0x155/0x3ed [ 3.444994] ? __warn+0xed/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] __warn+0x103/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] report_bug+0x119/0x1c0 [ 3.444994] handle_bug+0x3b/0x80 [ 3.444994] exc_invalid_op+0x18/0x70 [ 3.444994] asm_exc_invalid_op+0x12/0x20 [ 3.444994] RIP: 0010:free_irq+0xfb/0x480 [ 3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] ? vprintk_func+0x71/0x110 [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Dumping ftrace buffer: [ 3.444994] (ftrace buffer empty) [ 3.444994] Kernel Offset: disabled [ 3.444994] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/nicstar.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 86f3e72e686f..56d464b58768 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -525,6 +525,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev) /* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */ writel(0x00000000, card->membase + VPM);

+ card->intcnt = 0; + if (request_irq + (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) { + pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq); + error = 9; + ns_init_card_error(card, error); + return error; + } + /* Initialize TSQ */ card->tsq.org = dma_alloc_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT, @@ -751,15 +760,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)

card->efbie = 1;

- card->intcnt = 0; - if (request_irq - (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) { - printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq); - error = 9; - ns_init_card_error(card, error); - return error; - } - /* Register device */ card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops, -1, NULL);

From: Íñigo Huguet ihuguet@redhat.com

[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]

If SRIOV cannot be disabled during device removal or module unloading, return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a guest using Xen, but not with vfio/KVM. Despite that in that case the VFs won't work properly with PF removed and/or the module unloaded, I have let it as is because I don't know what side effects may have changing it, and also it seems to be the same that other drivers are doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior hasn't changed because the function is called with force=false.

Signed-off-by: Íñigo Huguet ihuguet@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c index b3c27331b374..8fce0c819a4b 100644 --- a/drivers/net/ethernet/sfc/ef10_sriov.c +++ b/drivers/net/ethernet/sfc/ef10_sriov.c @@ -378,12 +378,17 @@ fail1: return rc; }

+/* Disable SRIOV and remove VFs + * If some VFs are attached to a guest (using Xen, only) nothing is + * done if force=false, and vports are freed if force=true (for the non + * attachedc ones, only) but SRIOV is not disabled and VFs are not + * removed in either case. + */ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force) { struct pci_dev *dev = efx->pci_dev; - unsigned int vfs_assigned = 0; - - vfs_assigned = pci_vfs_assigned(dev); + unsigned int vfs_assigned = pci_vfs_assigned(dev); + int rc = 0;

if (vfs_assigned && !force) { netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; " @@ -393,10 +398,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)

if (!vfs_assigned) pci_disable_sriov(dev); + else + rc = -EBUSY;

efx_ef10_sriov_free_vf_vswitching(efx); efx->vf_count = 0; - return 0; + return rc; }

int efx_ef10_sriov_configure(struct efx_nic *efx, int num_vfs)

From: Gerd Rausch gerd.rausch@oracle.com

[ Upstream commit 74f160ead74bfe5f2b38afb4fcf86189f9ff40c9 ]

Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id".

This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.

Link: https://lore.kernel.org/r/f6662b7b-bdb7-2706-1e12-47c61d3474b6@oracle.com Signed-off-by: Gerd Rausch gerd.rausch@oracle.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/cma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index b59a4a819aaa..b5e7bd23857e 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2227,7 +2227,8 @@ static int cma_resolve_ib_route(struct rdma_id_private *id_priv, int timeout_ms) work->new_state = RDMA_CM_ROUTE_RESOLVED; work->event.event = RDMA_CM_EVENT_ROUTE_RESOLVED;

- route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL); + if (!route->path_rec) + route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL); if (!route->path_rec) { ret = -ENOMEM; goto err1;

From: Kai-Heng Feng kai.heng.feng@canonical.com

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working: [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb: [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue.

Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 041e719543fe..c478924198d5 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1666,14 +1666,6 @@ int hci_dev_do_close(struct hci_dev *hdev)

BT_DBG("%s %p", hdev->name, hdev);

- if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - test_bit(HCI_UP, &hdev->flags)) { - /* Execute vendor specific shutdown routine */ - if (hdev->shutdown) - hdev->shutdown(hdev); - } - cancel_delayed_work(&hdev->power_off);

hci_req_cancel(hdev, ENODEV); @@ -1746,6 +1738,14 @@ int hci_dev_do_close(struct hci_dev *hdev) clear_bit(HCI_INIT, &hdev->flags); }

+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + test_bit(HCI_UP, &hdev->flags)) { + /* Execute vendor specific shutdown routine */ + if (hdev->shutdown) + hdev->shutdown(hdev); + } + /* flush cmd work */ flush_work(&hdev->cmd_work);

From: Marcelo Ricardo Leitner marcelo.leitner@gmail.com

[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]

The first chunk in a packet is ensured to be present at the beginning of sctp_rcv(), as a packet needs to have at least 1 chunk. But the second one, may not be completely available and ch->length can be over uninitialized memory.

Fix here is by only trying to walk on the next chunk if there is enough to hold at least the header, and then proceed with the ch->length validation that is already there.

Reported-by: Ilja Van Sprundel ivansprundel@ioactive.com Signed-off-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/input.c b/net/sctp/input.c index 9fa89a35afcd..9dcc18db9918 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -1086,7 +1086,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,

ch = (sctp_chunkhdr_t *) ch_end; chunk_num++; - } while (ch_end < skb_tail_pointer(skb)); + } while (ch_end + sizeof(*ch) < skb_tail_pointer(skb));

return asoc; }

From: Oliver Hartkopp socketcan@hartkopp.net

commit fb8696ab14adadb2e3f6c17c18ed26b3ecd96691 upstream.

can_can_gw_rcv() is called under RCU protection, so after calling can_rx_unregister(), we have to call synchronize_rcu in order to wait for any RCU read-side critical sections to finish before removing the kmem_cache entry with the referenced gw job entry.

Link: https://lore.kernel.org/r/20210618173645.2238-1-socketcan@hartkopp.net Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing") Cc: linux-stable stable@vger.kernel.org Signed-off-by: Oliver Hartkopp socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/can/gw.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/net/can/gw.c +++ b/net/can/gw.c @@ -497,6 +497,7 @@ static int cgw_notifier(struct notifier_ if (gwj->src.dev == dev || gwj->dst.dev == dev) { hlist_del(&gwj->list); cgw_unregister_filter(gwj); + synchronize_rcu(); kmem_cache_free(cgw_cache, gwj); } } @@ -941,6 +942,7 @@ static void cgw_remove_all_jobs(void) hlist_for_each_entry_safe(gwj, nx, &cgw_list, list) { hlist_del(&gwj->list); cgw_unregister_filter(gwj); + synchronize_rcu(); kmem_cache_free(cgw_cache, gwj); } } @@ -1008,6 +1010,7 @@ static int cgw_remove_job(struct sk_buff

hlist_del(&gwj->list); cgw_unregister_filter(gwj); + synchronize_rcu(); kmem_cache_free(cgw_cache, gwj); err = 0; break;

From: Davis Mosenkovs davis@mosenkovs.lv

Commit e3d4030498c3 ("mac80211: do not accept/forward invalid EAPOL frames") uses skb_mac_header() before eth_type_trans() is called leading to incorrect pointer, the pointer gets written to. This issue has appeared during backporting to 4.4, 4.9 and 4.14.

Fixes: e3d4030498c3 ("mac80211: do not accept/forward invalid EAPOL frames") Link: https://lore.kernel.org/r/CAHQn7pKcyC_jYmGyTcPCdk9xxATwW5QPNph=bsZV8d-HPwNsy... Cc: stable@vger.kernel.org # 4.4.x Signed-off-by: Davis Mosenkovs davis@mosenkovs.lv Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/mac80211/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2234,7 +2234,7 @@ ieee80211_deliver_skb(struct ieee80211_r #endif

if (skb) { - struct ethhdr *ehdr = (void *)skb_mac_header(skb); + struct ethhdr *ehdr = (struct ethhdr *)skb->data;

/* deliver to local stack */ skb->protocol = eth_type_trans(skb, dev);

From: Al Cooper alcooperx@gmail.com

commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream.

When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value().

This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following command: "mmc rpmb read-counter /dev/mmcblk0rpmb".

Signed-off-by: Al Cooper alcooperx@gmail.com Acked-by: Adrian Hunter adrian.hunter@intel.com Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/mmc/host/sdhci.c | 4 ++++ drivers/mmc/host/sdhci.h | 1 + 2 files changed, 5 insertions(+)

--- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1134,6 +1134,10 @@ static u16 sdhci_get_preset_value(struct u16 preset = 0;

switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_HIGH_SPEED); + break; case MMC_TIMING_UHS_SDR12: preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12); break; --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -232,6 +232,7 @@

/* 60-FB reserved */

+#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64 #define SDHCI_PRESET_FOR_SDR12 0x66 #define SDHCI_PRESET_FOR_SDR25 0x68 #define SDHCI_PRESET_FOR_SDR50 0x6A

From: Dmitry Osipenko digetx@gmail.com

commit f6eb84fa596abf28959fc7e0b626f925eb1196c7 upstream.

The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise Tegra UCMs don't match by the path/name.

All Tegra machine drivers are specifying the card's name, but it has no effect if model name is specified in the device-tree since it overrides the card's name. We need to set the driver_name to "tegra" in order to get a usable lookup path for the updated ALSA UCMs. The new UCM lookup path has a form of driver_name/card_name.

The old lookup paths that are based on driver module name continue to work as before. Note that UCM matching never worked for Tegra ASoC drivers if they were compiled as built-in, this is fixed by supporting the new naming scheme.

Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko digetx@gmail.com Link: https://lore.kernel.org/r/20210529154649.25936-2-digetx@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/tegra/tegra_alc5632.c | 1 + sound/soc/tegra/tegra_max98090.c | 1 + sound/soc/tegra/tegra_rt5640.c | 1 + sound/soc/tegra/tegra_rt5677.c | 1 + sound/soc/tegra/tegra_wm8753.c | 1 + sound/soc/tegra/tegra_wm8903.c | 1 + sound/soc/tegra/tegra_wm9712.c | 1 + sound/soc/tegra/trimslice.c | 1 + 8 files changed, 8 insertions(+)

--- a/sound/soc/tegra/tegra_alc5632.c +++ b/sound/soc/tegra/tegra_alc5632.c @@ -149,6 +149,7 @@ static struct snd_soc_dai_link tegra_alc

static struct snd_soc_card snd_soc_tegra_alc5632 = { .name = "tegra-alc5632", + .driver_name = "tegra", .owner = THIS_MODULE, .remove = tegra_alc5632_card_remove, .dai_link = &tegra_alc5632_dai, --- a/sound/soc/tegra/tegra_max98090.c +++ b/sound/soc/tegra/tegra_max98090.c @@ -205,6 +205,7 @@ static struct snd_soc_dai_link tegra_max

static struct snd_soc_card snd_soc_tegra_max98090 = { .name = "tegra-max98090", + .driver_name = "tegra", .owner = THIS_MODULE, .remove = tegra_max98090_card_remove, .dai_link = &tegra_max98090_dai, --- a/sound/soc/tegra/tegra_rt5640.c +++ b/sound/soc/tegra/tegra_rt5640.c @@ -150,6 +150,7 @@ static struct snd_soc_dai_link tegra_rt5

static struct snd_soc_card snd_soc_tegra_rt5640 = { .name = "tegra-rt5640", + .driver_name = "tegra", .owner = THIS_MODULE, .remove = tegra_rt5640_card_remove, .dai_link = &tegra_rt5640_dai, --- a/sound/soc/tegra/tegra_rt5677.c +++ b/sound/soc/tegra/tegra_rt5677.c @@ -198,6 +198,7 @@ static struct snd_soc_dai_link tegra_rt5

static struct snd_soc_card snd_soc_tegra_rt5677 = { .name = "tegra-rt5677", + .driver_name = "tegra", .owner = THIS_MODULE, .remove = tegra_rt5677_card_remove, .dai_link = &tegra_rt5677_dai, --- a/sound/soc/tegra/tegra_wm8753.c +++ b/sound/soc/tegra/tegra_wm8753.c @@ -110,6 +110,7 @@ static struct snd_soc_dai_link tegra_wm8

static struct snd_soc_card snd_soc_tegra_wm8753 = { .name = "tegra-wm8753", + .driver_name = "tegra", .owner = THIS_MODULE, .dai_link = &tegra_wm8753_dai, .num_links = 1, --- a/sound/soc/tegra/tegra_wm8903.c +++ b/sound/soc/tegra/tegra_wm8903.c @@ -227,6 +227,7 @@ static struct snd_soc_dai_link tegra_wm8

static struct snd_soc_card snd_soc_tegra_wm8903 = { .name = "tegra-wm8903", + .driver_name = "tegra", .owner = THIS_MODULE, .dai_link = &tegra_wm8903_dai, .num_links = 1, --- a/sound/soc/tegra/tegra_wm9712.c +++ b/sound/soc/tegra/tegra_wm9712.c @@ -59,6 +59,7 @@ static struct snd_soc_dai_link tegra_wm9

static struct snd_soc_card snd_soc_tegra_wm9712 = { .name = "tegra-wm9712", + .driver_name = "tegra", .owner = THIS_MODULE, .dai_link = &tegra_wm9712_dai, .num_links = 1, --- a/sound/soc/tegra/trimslice.c +++ b/sound/soc/tegra/trimslice.c @@ -103,6 +103,7 @@ static struct snd_soc_dai_link trimslice

static struct snd_soc_card snd_soc_trimslice = { .name = "tegra-trimslice", + .driver_name = "tegra", .owner = THIS_MODULE, .dai_link = &trimslice_tlv320aic23_dai, .num_links = 1,

From: Linus Walleij linus.walleij@linaro.org

commit f1c74a6c07e76fcb31a4bcc1f437c4361a2674ce upstream.

Trying to get the AB8500 charging driver working I ran into a bit of bitrot: we haven't used the driver for a while so errors in refactorings won't be noticed.

This one is pretty self evident: use argument to the macro or we end up with a random pointer to something else.

Cc: stable@vger.kernel.org Cc: Krzysztof Kozlowski krzk@kernel.org Cc: Marcus Cooper codekipper@gmail.com Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/mfd/abx500/ux500_chargalg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/mfd/abx500/ux500_chargalg.h +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -15,7 +15,7 @@ * - POWER_SUPPLY_TYPE_USB, * because only them store as drv_data pointer to struct ux500_charger. */ -#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy) +#define psy_to_ux500_charger(x) power_supply_get_drvdata(x)

/* Forward declaration */ struct ux500_charger;

From: Lv Yunlong lyl2019@mail.ustc.edu.cn

commit 9272e5d0028d45a3b45b58c9255e6e0df53f7ad9 upstream.

In the out_err_bus_register error branch of tpci200_pci_probe, tpci200->info->cfg_regs is freed by tpci200_uninstall()-> tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs) in the first time.

But later, iounmap() is called to free tpci200->info->cfg_regs again.

My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall() to avoid the double free.

Fixes: cea2f7cdff2af ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode") Cc: stable stable@vger.kernel.org Acked-by: Samuel Iglesias Gonsalvez siglesias@igalia.com Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Link: https://lore.kernel.org/r/20210524093205.8333-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ipack/carriers/tpci200.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/ipack/carriers/tpci200.c +++ b/drivers/ipack/carriers/tpci200.c @@ -591,8 +591,11 @@ static int tpci200_pci_probe(struct pci_

out_err_bus_register: tpci200_uninstall(tpci200); + /* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */ + tpci200->info->cfg_regs = NULL; out_err_install: - iounmap(tpci200->info->cfg_regs); + if (tpci200->info->cfg_regs) + iounmap(tpci200->info->cfg_regs); out_err_ioremap: pci_release_region(pdev, TPCI200_CFG_MEM_BAR); out_err_pci_request:

From: Pavel Skripkin paskripkin@gmail.com

commit 0a045eac8d0427b64577a24d74bb8347c905ac65 upstream.

syzbot reported memory leak in zr364xx driver. The problem was in non-freed urb in case of usb_submit_urb() fail.

backtrace: [<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline] [<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022 [<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline] [<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516 [<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576

Fixes: ccbf035ae5de ("V4L/DVB (12278): zr364xx: implement V4L2_CAP_STREAMING") Cc: stable@vger.kernel.org Reported-by: syzbot+af4fa391ef18efdd5f69@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/usb/zr364xx/zr364xx.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -1068,6 +1068,7 @@ static int zr364xx_start_readpipe(struct DBG("submitting URB %p\n", pipe_info->stream_urb); retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL); if (retval) { + usb_free_urb(pipe_info->stream_urb); printk(KERN_ERR KBUILD_MODNAME ": start read pipe failed\n"); return retval; }

From: Johan Hovold johan@kernel.org

commit b4bb4d425b7b02424afea2dfdcd77b3b4794175e upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning.

Fix the single zero-length control request which was using the read-register helper, and update the helper so that zero-length reads fail with an error message instead.

Fixes: 6a7eba24e4f0 ("V4L/DVB (8157): gspca: all subdrivers") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/usb/gspca/sunplus.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/gspca/sunplus.c +++ b/drivers/media/usb/gspca/sunplus.c @@ -255,6 +255,10 @@ static void reg_r(struct gspca_dev *gspc PERR("reg_r: buffer overflow\n"); return; } + if (len == 0) { + PERR("reg_r: zero-length read\n"); + return; + } if (gspca_dev->usb_err < 0) return; ret = usb_control_msg(gspca_dev->dev, @@ -263,7 +267,7 @@ static void reg_r(struct gspca_dev *gspc USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, /* value */ index, - len ? gspca_dev->usb_buf : NULL, len, + gspca_dev->usb_buf, len, 500); if (ret < 0) { pr_err("reg_r err %d\n", ret); @@ -739,7 +743,7 @@ static int sd_start(struct gspca_dev *gs case MegaImageVI: reg_w_riv(gspca_dev, 0xf0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); - reg_r(gspca_dev, 0xf0, 4, 0); + reg_w_riv(gspca_dev, 0xf0, 4, 0); spca504B_WaitCmdStatus(gspca_dev); break; default:

From: Pavel Skripkin paskripkin@gmail.com

commit 9d574f985fe33efd6911f4d752de6f485a1ea732 upstream.

Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear:

struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap;

JFS_IP() will return invalid pointer when ipimap == NULL

Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

Reported-and-tested-by: syzbot+0a89a7b56db04c21a656@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/jfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/jfs/inode.c +++ b/fs/jfs/inode.c @@ -160,7 +160,8 @@ void jfs_evict_inode(struct inode *inode if (test_cflag(COMMIT_Freewmap, inode)) jfs_free_zero_link(inode);

- diFree(inode); + if (JFS_SBI(inode->i_sb)->ipimap) + diFree(inode);

/* * Free the inode from the quota allocation.

From: Lai Jiangshan laijs@linux.alibaba.com

commit f85d40160691881a17a397c448d799dfc90987ba upstream.

When the host is using debug registers but the guest is not using them nor is the guest in guest-debug state, the kvm code does not reset the host debug registers before kvm_x86->run(). Rather, it relies on the hardware vmentry instruction to automatically reset the dr7 registers which ensures that the host breakpoints do not affect the guest.

This however violates the non-instrumentable nature around VM entry and exit; for example, when a host breakpoint is set on vcpu->arch.cr2,

Another issue is consistency. When the guest debug registers are active, the host breakpoints are reset before kvm_x86->run(). But when the guest debug registers are inactive, the host breakpoints are delayed to be disabled. The host tracing tools may see different results depending on what the guest is doing.

To fix the problems, we clear %db7 unconditionally before kvm_x86->run() if the host has set any breakpoints, no matter if the guest is using them or not.

Signed-off-by: Lai Jiangshan laijs@linux.alibaba.com Message-Id: 20210628172632.81029-1-jiangshanlai@gmail.com Cc: stable@vger.kernel.org [Only clear %db7 instead of reloading all debug registers. - Paolo] Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6724,6 +6724,8 @@ static int vcpu_enter_guest(struct kvm_v set_debugreg(vcpu->arch.eff_db[3], 3); set_debugreg(vcpu->arch.dr6, 6); vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD; + } else if (unlikely(hw_breakpoint_active())) { + set_debugreg(0, 7); }

kvm_x86_ops->run(vcpu);

From: Lv Yunlong lyl2019@mail.ustc.edu.cn

[ Upstream commit 7272b591c4cb9327c43443f67b8fbae7657dd9ae ]

In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively.

In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.

My patch add a "error_init_remote" label to handle the error of ibmasm_init_remote_input_dev(), to avoid the uaf bugs.

Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Link: https://lore.kernel.org/r/20210426170620.10546-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/ibmasm/module.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c index 6b3bf9ab051d..706decef68a0 100644 --- a/drivers/misc/ibmasm/module.c +++ b/drivers/misc/ibmasm/module.c @@ -123,7 +123,7 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id) result = ibmasm_init_remote_input_dev(sp); if (result) { dev_err(sp->dev, "Failed to initialize remote queue\n"); - goto error_send_message; + goto error_init_remote; }

result = ibmasm_send_driver_vpd(sp); @@ -143,8 +143,9 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0;

error_send_message: - disable_sp_interrupts(sp->base_address); ibmasm_free_remote_input_dev(sp); +error_init_remote: + disable_sp_interrupts(sp->base_address); free_irq(sp->irq, (void *)sp); error_request_irq: iounmap(sp->base_address);

From: James Smart jsmart2021@gmail.com

[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ]

An 'unexpected timeout' message may be seen in a point-2-point topology. The message occurs when a PLOGI is received before the driver is notified of FLOGI completion. The FLOGI completion failure causes discovery to be triggered for a second time. The discovery timer is restarted but no new discovery activity is initiated, thus the timeout message eventually appears.

In point-2-point, when discovery has progressed before the FLOGI completion is processed, it is not a failure. Add code to FLOGI completion to detect that discovery has progressed and exit the FLOGI handling (noop'ing it).

Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com Co-developed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Justin Tee justin.tee@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_els.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 5be938b47f48..b66b1ed6d2af 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1142,6 +1142,15 @@ stop_rr_fcf_flogi: phba->fcf.fcf_redisc_attempted = 0; /* reset */ goto out; } + } else if (vport->port_state > LPFC_FLOGI && + vport->fc_flag & FC_PT2PT) { + /* + * In a p2p topology, it is possible that discovery has + * already progressed, and this completion can be ignored. + * Recheck the indicated topology. + */ + if (!sp->cmn.fPort) + goto out; }

flogifail:

From: Jiapeng Chong jiapeng.chong@linux.alibaba.com

[ Upstream commit 492109333c29e1bb16d8732e1d597b02e8e0bf2e ]

The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc.

Eliminate the follow smatch warning:

fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'.

Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_logmgr.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index a69bdf2a1085..d19542a88c2c 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -1339,6 +1339,7 @@ int lmLogInit(struct jfs_log * log) } else { if (memcmp(logsuper->uuid, log->uuid, 16)) { jfs_warn("wrong uuid on JFS log device"); + rc = -EINVAL; goto errout20; } log->size = le32_to_cpu(logsuper->size);

From: Zou Wei zou_wei@huawei.com

[ Upstream commit 4700ef326556ed74aba188f12396740a8c1c21dd ]

This patch adds/modifies MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/da9052-i2c.c | 1 + drivers/mfd/stmpe-i2c.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index 2697ffb08009..2992fd94bc0c 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -118,6 +118,7 @@ static const struct i2c_device_id da9052_i2c_id[] = { {"da9053-bc", DA9053_BC}, {} }; +MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);

#ifdef CONFIG_OF static const struct of_device_id dialog_dt_ids[] = { diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index c3f4aab53b07..663a6c1c3d0d 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -107,7 +107,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = { { "stmpe2403", STMPE2403 }, { } }; -MODULE_DEVICE_TABLE(i2c, stmpe_id); +MODULE_DEVICE_TABLE(i2c, stmpe_i2c_id);

static struct i2c_driver stmpe_i2c_driver = { .driver = {

From: Geoff Levand geoff@infradead.org

[ Upstream commit 9733862e50fdba55e7f1554e4286fcc5302ff28e ]

Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix potential NULL pointer dereference) added a null check on the dma_mask pointer of the kernel's device structure.

Add a dma_mask variable to the ps3_dma_region structure and set the device structure's dma_mask pointer to point to this new variable.

Fixes runtime errors like these: # WARNING: Fixes tag on line 10 doesn't match correct format # WARNING: Fixes tag on line 10 doesn't match correct format

ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0 ps3flash sb_01: ps3stor_setup:193: map DMA region failed

Signed-off-by: Geoff Levand geoff@infradead.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.162274642... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/ps3.h | 2 ++ arch/powerpc/platforms/ps3/mm.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)

diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index a1bc7e758422..2d729b53a556 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -83,6 +83,7 @@ struct ps3_dma_region_ops; * @bus_addr: The 'translated' bus address of the region. * @len: The length in bytes of the region. * @offset: The offset from the start of memory of the region. + * @dma_mask: Device dma_mask. * @ioid: The IOID of the device who owns this region * @chunk_list: Opaque variable used by the ioc page manager. * @region_ops: struct ps3_dma_region_ops - dma region operations @@ -97,6 +98,7 @@ struct ps3_dma_region { enum ps3_dma_region_type region_type; unsigned long len; unsigned long offset; + u64 dma_mask;

/* driver variables (set by ps3_dma_region_create) */ unsigned long bus_addr; diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 19bae78b1f25..76cbf1be9962 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -18,6 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */

+#include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/export.h> #include <linux/memblock.h> @@ -1132,6 +1133,7 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev, enum ps3_dma_region_type region_type, void *addr, unsigned long len) { unsigned long lpar_addr; + int result;

lpar_addr = addr ? ps3_mm_phys_to_lpar(__pa(addr)) : 0;

@@ -1143,6 +1145,16 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev, r->offset -= map.r1.offset; r->len = len ? len : _ALIGN_UP(map.total, 1 << r->page_size);

+ dev->core.dma_mask = &r->dma_mask; + + result = dma_set_mask_and_coherent(&dev->core, DMA_BIT_MASK(32)); + + if (result < 0) { + dev_err(&dev->core, "%s:%d: dma_set_mask_and_coherent failed: %d\n", + __func__, __LINE__, result); + return result; + } + switch (dev->dev_type) { case PS3_DEVICE_TYPE_SB: r->region_ops = (USE_DYNAMIC_DMA)

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 80b9c1be567c3c6bbe0d4b290af578e630485b5d ]

If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails, snd_pmac_probe() need return error code.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20210616021121.1991502-1-yangyingliang@huawei.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/ppc/powermac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c index 33c6be9fb388..7c70ba5e2540 100644 --- a/sound/ppc/powermac.c +++ b/sound/ppc/powermac.c @@ -90,7 +90,11 @@ static int snd_pmac_probe(struct platform_device *devptr) sprintf(card->shortname, "PowerMac %s", name_ext); sprintf(card->longname, "%s (Dev %d) Sub-frame %d", card->shortname, chip->device_id, chip->subframe); - if ( snd_pmac_tumbler_init(chip) < 0 || snd_pmac_tumbler_post_init() < 0) + err = snd_pmac_tumbler_init(chip); + if (err < 0) + goto __error; + err = snd_pmac_tumbler_post_init(); + if (err < 0) goto __error; break; case PMAC_AWACS:

From: Zhen Lei thunder.leizhen@huawei.com

[ Upstream commit 7d3865a10b9ff2669c531d5ddd60bf46b3d48f1e ]

When devm_kcalloc() fails, the error code -ENOMEM should be returned instead of -EINVAL.

Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Link: https://lore.kernel.org/r/20210617103729.1918-1-thunder.leizhen@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index b927f9c81d92..e69a7f8b6163 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3394,7 +3394,7 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card, if (!routes) { dev_err(card->dev, "ASoC: Could not allocate DAPM route table\n"); - return -EINVAL; + return -ENOMEM; }

for (i = 0; i < num_routes; i++) {

From: Ruslan Bilovol ruslan.bilovol@gmail.com

[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]

Running sparse checker it shows warning message about incorrect endianness used for descriptor initialization:

| f_hid.c:91:43: warning: incorrect type in initializer (different base types) | f_hid.c:91:43: expected restricted __le16 [usertype] bcdHID | f_hid.c:91:43: got int

Fixing issue with cpu_to_le16() macro, however this is not a real issue as the value is the same both endians.

Cc: Fabien Chouteau fabien.chouteau@barco.com Cc: Segiy Stetsyuk serg_stetsuk@ukr.net Signed-off-by: Ruslan Bilovol ruslan.bilovol@gmail.com Link: https://lore.kernel.org/r/20210617162755.29676-1-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/f_hid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index a5dae5bb62ab..590e056d3618 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -91,7 +91,7 @@ static struct usb_interface_descriptor hidg_interface_desc = { static struct hid_descriptor hidg_desc = { .bLength = sizeof hidg_desc, .bDescriptorType = HID_DT_HID, - .bcdHID = 0x0101, + .bcdHID = cpu_to_le16(0x0101), .bCountryCode = 0x00, .bNumDescriptors = 0x1, /*.desc[0].bDescriptorType = DYNAMIC */

From: Benjamin Herrenschmidt benh@kernel.crashing.org

[ Upstream commit c93f80849bdd9b45d834053ae1336e28f0026c84 ]

This fixes the core devtree.c functions and the ns16550 UART backend.

Signed-off-by: Benjamin Herrenschmidt benh@kernel.crashing.org Signed-off-by: Paul Mackerras paulus@ozlabs.org Reviewed-by: Segher Boessenkool segher@kernel.crashing.org Acked-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/YMwXrPT8nc4YUdJ9@thinks.paulus.ozlabs.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/boot/devtree.c | 59 +++++++++++++++++++++---------------- arch/powerpc/boot/ns16550.c | 9 ++++-- 2 files changed, 41 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index a7e21a35c03a..27c84b82b588 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -17,6 +17,7 @@ #include "string.h" #include "stdio.h" #include "ops.h" +#include "of.h"

void dt_fixup_memory(u64 start, u64 size) { @@ -27,21 +28,25 @@ void dt_fixup_memory(u64 start, u64 size) root = finddevice("/"); if (getprop(root, "#address-cells", &naddr, sizeof(naddr)) < 0) naddr = 2; + else + naddr = be32_to_cpu(naddr); if (naddr < 1 || naddr > 2) fatal("Can't cope with #address-cells == %d in /\n\r", naddr);

if (getprop(root, "#size-cells", &nsize, sizeof(nsize)) < 0) nsize = 1; + else + nsize = be32_to_cpu(nsize); if (nsize < 1 || nsize > 2) fatal("Can't cope with #size-cells == %d in /\n\r", nsize);

i = 0; if (naddr == 2) - memreg[i++] = start >> 32; - memreg[i++] = start & 0xffffffff; + memreg[i++] = cpu_to_be32(start >> 32); + memreg[i++] = cpu_to_be32(start & 0xffffffff); if (nsize == 2) - memreg[i++] = size >> 32; - memreg[i++] = size & 0xffffffff; + memreg[i++] = cpu_to_be32(size >> 32); + memreg[i++] = cpu_to_be32(size & 0xffffffff);

memory = finddevice("/memory"); if (! memory) { @@ -49,9 +54,9 @@ void dt_fixup_memory(u64 start, u64 size) setprop_str(memory, "device_type", "memory"); }

- printf("Memory <- <0x%x", memreg[0]); + printf("Memory <- <0x%x", be32_to_cpu(memreg[0])); for (i = 1; i < (naddr + nsize); i++) - printf(" 0x%x", memreg[i]); + printf(" 0x%x", be32_to_cpu(memreg[i])); printf("> (%ldMB)\n\r", (unsigned long)(size >> 20));

setprop(memory, "reg", memreg, (naddr + nsize)*sizeof(u32)); @@ -69,10 +74,10 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus) printf("CPU bus-frequency <- 0x%x (%dMHz)\n\r", bus, MHZ(bus));

while ((devp = find_node_by_devtype(devp, "cpu"))) { - setprop_val(devp, "clock-frequency", cpu); - setprop_val(devp, "timebase-frequency", tb); + setprop_val(devp, "clock-frequency", cpu_to_be32(cpu)); + setprop_val(devp, "timebase-frequency", cpu_to_be32(tb)); if (bus > 0) - setprop_val(devp, "bus-frequency", bus); + setprop_val(devp, "bus-frequency", cpu_to_be32(bus)); }

timebase_period_ns = 1000000000 / tb; @@ -84,7 +89,7 @@ void dt_fixup_clock(const char *path, u32 freq)

if (devp) { printf("%s: clock-frequency <- %x (%dMHz)\n\r", path, freq, MHZ(freq)); - setprop_val(devp, "clock-frequency", freq); + setprop_val(devp, "clock-frequency", cpu_to_be32(freq)); } }

@@ -137,8 +142,12 @@ void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize) { if (getprop(node, "#address-cells", naddr, 4) != 4) *naddr = 2; + else + *naddr = be32_to_cpu(*naddr); if (getprop(node, "#size-cells", nsize, 4) != 4) *nsize = 1; + else + *nsize = be32_to_cpu(*nsize); }

static void copy_val(u32 *dest, u32 *src, int naddr) @@ -167,9 +176,9 @@ static int add_reg(u32 *reg, u32 *add, int naddr) int i, carry = 0;

for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) { - u64 tmp = (u64)reg[i] + add[i] + carry; + u64 tmp = (u64)be32_to_cpu(reg[i]) + be32_to_cpu(add[i]) + carry; carry = tmp >> 32; - reg[i] = (u32)tmp; + reg[i] = cpu_to_be32((u32)tmp); }

return !carry; @@ -184,18 +193,18 @@ static int compare_reg(u32 *reg, u32 *range, u32 *rangesize) u32 end;

for (i = 0; i < MAX_ADDR_CELLS; i++) { - if (reg[i] < range[i]) + if (be32_to_cpu(reg[i]) < be32_to_cpu(range[i])) return 0; - if (reg[i] > range[i]) + if (be32_to_cpu(reg[i]) > be32_to_cpu(range[i])) break; }

for (i = 0; i < MAX_ADDR_CELLS; i++) { - end = range[i] + rangesize[i]; + end = be32_to_cpu(range[i]) + be32_to_cpu(rangesize[i]);

- if (reg[i] < end) + if (be32_to_cpu(reg[i]) < end) break; - if (reg[i] > end) + if (be32_to_cpu(reg[i]) > end) return 0; }

@@ -244,7 +253,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, return 0;

dt_get_reg_format(parent, &naddr, &nsize); - if (nsize > 2) return 0;

@@ -256,10 +264,10 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,

copy_val(last_addr, prop_buf + offset, naddr);

- ret_size = prop_buf[offset + naddr]; + ret_size = be32_to_cpu(prop_buf[offset + naddr]); if (nsize == 2) { ret_size <<= 32; - ret_size |= prop_buf[offset + naddr + 1]; + ret_size |= be32_to_cpu(prop_buf[offset + naddr + 1]); }

for (;;) { @@ -282,7 +290,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,

offset = find_range(last_addr, prop_buf, prev_naddr, naddr, prev_nsize, buflen / 4); - if (offset < 0) return 0;

@@ -300,8 +307,7 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, if (naddr > 2) return 0;

- ret_addr = ((u64)last_addr[2] << 32) | last_addr[3]; - + ret_addr = ((u64)be32_to_cpu(last_addr[2]) << 32) | be32_to_cpu(last_addr[3]); if (sizeof(void *) == 4 && (ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL || ret_addr + ret_size > 0x100000000ULL)) @@ -354,11 +360,14 @@ int dt_is_compatible(void *node, const char *compat) int dt_get_virtual_reg(void *node, void **addr, int nres) { unsigned long xaddr; - int n; + int n, i;

n = getprop(node, "virtual-reg", addr, nres * 4); - if (n > 0) + if (n > 0) { + for (i = 0; i < n/4; i ++) + ((u32 *)addr)[i] = be32_to_cpu(((u32 *)addr)[i]); return n / 4; + }

for (n = 0; n < nres; n++) { if (!dt_xlate_reg(node, n, &xaddr, NULL)) diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c index 8c9ead94be06..cea34a20085c 100644 --- a/arch/powerpc/boot/ns16550.c +++ b/arch/powerpc/boot/ns16550.c @@ -14,6 +14,7 @@ #include "stdio.h" #include "io.h" #include "ops.h" +#include "of.h"

#define UART_DLL 0 /* Out: Divisor Latch Low */ #define UART_DLM 1 /* Out: Divisor Latch High */ @@ -57,16 +58,20 @@ int ns16550_console_init(void *devp, struct serial_console_data *scdp) int n; u32 reg_offset;

- if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1) + if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1) { + printf("virt reg parse fail...\r\n"); return -1; + }

n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset)); if (n == sizeof(reg_offset)) - reg_base += reg_offset; + reg_base += be32_to_cpu(reg_offset);

n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift)); if (n != sizeof(reg_shift)) reg_shift = 0; + else + reg_shift = be32_to_cpu(reg_shift);

scdp->open = ns16550_open; scdp->putc = ns16550_putc;

From: Jiajun Cao jjcao20@fudan.edu.cn

[ Upstream commit 8c13212443230d03ff25014514ec0d53498c0912 ]

The function hda_tegra_first_init() neglects to check the return value after executing platform_get_irq().

hda_tegra_first_init() should check the return value (if negative error number) for errors so as to not pass a negative value to the devm_request_irq().

Fix it by adding a check for the return value irq_id.

Signed-off-by: Jiajun Cao jjcao20@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Reviewed-by: Thierry Reding treding@nvidia.com Link: https://lore.kernel.org/r/20210622131947.94346-1-jjcao20@fudan.edu.cn Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_tegra.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 039fbbb1e53c..89359a962e47 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -363,6 +363,9 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) unsigned short gcap; int irq_id = platform_get_irq(pdev, 0);

+ if (irq_id < 0) + return irq_id; + err = hda_tegra_init_chip(chip, pdev); if (err) return err;

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit b601a18f12383001e7a8da238de7ca1559ebc450 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver.

So drop the hardware modification from the .remove() callback.

Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-spear.c | 4 ---- 1 file changed, 4 deletions(-)

diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c index 6c6b44fd3f43..2d11ac277de8 100644 --- a/drivers/pwm/pwm-spear.c +++ b/drivers/pwm/pwm-spear.c @@ -231,10 +231,6 @@ static int spear_pwm_probe(struct platform_device *pdev) static int spear_pwm_remove(struct platform_device *pdev) { struct spear_pwm_chip *pc = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < NUM_PWM; i++) - pwm_disable(&pc->chip.pwms[i]);

/* clk was prepared in probe, hence unprepare it here */ clk_unprepare(pc->clk);

From: Bixuan Cui cuibixuan@huawei.com

[ Upstream commit ed3443fb4df4e140a22f65144546c8a8e1e27f4e ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Bixuan Cui cuibixuan@huawei.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/reset/gpio-poweroff.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c index be3d81ff51cc..a44e3427fdeb 100644 --- a/drivers/power/reset/gpio-poweroff.c +++ b/drivers/power/reset/gpio-poweroff.c @@ -84,6 +84,7 @@ static const struct of_device_id of_gpio_poweroff_match[] = { { .compatible = "gpio-poweroff", }, {}, }; +MODULE_DEVICE_TABLE(of, of_gpio_poweroff_match);

static struct platform_driver gpio_poweroff_driver = { .probe = gpio_poweroff_probe,

From: Zou Wei zou_wei@huawei.com

[ Upstream commit c08a6b31e4917034f0ed0cb457c3bb209576f542 ]

This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Reviewed-by: Guenter Roeck linux@roeck-us.net Link: https://lore.kernel.org/r/1620716495-108352-1-git-send-email-zou_wei@huawei.... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/watchdog/sbc60xxwdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index 2eef58a0cf05..152db059d5aa 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -152,7 +152,7 @@ static void wdt_startup(void) static void wdt_turnoff(void) { /* Stop the timer */ - del_timer(&timer); + del_timer_sync(&timer); inb_p(wdt_stop); pr_info("Watchdog timer is now disabled...\n"); }