From: Lorenzo Bianconi lorenzo@kernel.org
[ Upstream commit d941f47caa386931c3b598ad1b43d5ddd65869aa ]
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design
Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c index b4d0795154e3d..a2afd1a3c51ba 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c @@ -206,10 +206,11 @@ mt7615_queues_acq(struct seq_file *s, void *data) int i;
for (i = 0; i < 16; i++) { - int j, acs = i / 4, index = i % 4; + int j, wmm_idx = i % MT7615_MAX_WMM_SETS; + int acs = i / MT7615_MAX_WMM_SETS; u32 ctrl, val, qlen = 0;
- val = mt76_rr(dev, MT_PLE_AC_QEMPTY(acs, index)); + val = mt76_rr(dev, MT_PLE_AC_QEMPTY(acs, wmm_idx)); ctrl = BIT(31) | BIT(15) | (acs << 8);
for (j = 0; j < 32; j++) { @@ -217,11 +218,11 @@ mt7615_queues_acq(struct seq_file *s, void *data) continue;
mt76_wr(dev, MT_PLE_FL_Q0_CTRL, - ctrl | (j + (index << 5))); + ctrl | (j + (wmm_idx << 5))); qlen += mt76_get_field(dev, MT_PLE_FL_Q3_CTRL, GENMASK(11, 0)); } - seq_printf(s, "AC%d%d: queued=%d\n", acs, index, qlen); + seq_printf(s, "AC%d%d: queued=%d\n", wmm_idx, acs, qlen); }
return 0;
From: Jiri Slaby jslaby@suse.cz
[ Upstream commit ea0cca61d628662e4a1b26c77c7646f9a0257069 ]
The tlv passed to iwl_dbg_tlv_alloc_trigger comes from a loaded firmware file. The memory can be marked as read-only as firmware could be shared. In anyway, writing to this memory is not expected. So, iwl_dbg_tlv_alloc_trigger can crash now:
BUG: unable to handle page fault for address: ffffae2c01bfa794 PF: supervisor write access in kernel mode PF: error_code(0x0003) - permissions violation PGD 107d51067 P4D 107d51067 PUD 107d52067 PMD 659ad2067 PTE 8000000662298161 CPU: 2 PID: 161 Comm: kworker/2:1 Not tainted 5.7.0-3.gad96a07-default #1 openSUSE Tumbleweed (unreleased) RIP: 0010:iwl_dbg_tlv_alloc_trigger+0x25/0x60 [iwlwifi] Code: eb f2 0f 1f 00 66 66 66 66 90 83 7e 04 33 48 89 f8 44 8b 46 10 48 89 f7 76 40 41 8d 50 ff 83 fa 19 77 23 8b 56 20 85 d2 75 07 <c7> 46 20 ff ff ff ff 4b 8d 14 40 48 c1 e2 04 48 8d b4 10 00 05 00 RSP: 0018:ffffae2c00417ce8 EFLAGS: 00010246 RAX: ffff8f0522334018 RBX: ffff8f0522334018 RCX: ffffffffc0fc26c0 RDX: 0000000000000000 RSI: ffffae2c01bfa774 RDI: ffffae2c01bfa774 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000001 R10: 0000000000000034 R11: ffffae2c01bfa77c R12: ffff8f0522334230 R13: 0000000001000009 R14: ffff8f0523fdbc00 R15: ffff8f051f395800 FS: 0000000000000000(0000) GS:ffff8f0527c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffae2c01bfa794 CR3: 0000000389eba000 CR4: 00000000000006e0 Call Trace: iwl_dbg_tlv_alloc+0x79/0x120 [iwlwifi] iwl_parse_tlv_firmware.isra.0+0x57d/0x1550 [iwlwifi] iwl_req_fw_callback+0x3f8/0x6a0 [iwlwifi] request_firmware_work_func+0x47/0x90 process_one_work+0x1e3/0x3b0 worker_thread+0x46/0x340 kthread+0x115/0x140 ret_from_fork+0x1f/0x40
As can be seen, write bit is not set in the PTE. Read of trig->occurrences succeeds in iwl_dbg_tlv_alloc_trigger, but trig->occurrences = cpu_to_le32(-1); fails there, obviously.
This is likely because we (at SUSE) use compressed firmware and that is marked as RO after decompression (see fw_map_paged_buf).
Fix it by creating a temporary buffer in case we need to change the memory.
Signed-off-by: Jiri Slaby jslaby@suse.cz Reported-by: Dieter Nützel Dieter@nuetzel-hh.de Tested-by: Dieter Nützel Dieter@nuetzel-hh.de Cc: Johannes Berg johannes.berg@intel.com Cc: Emmanuel Grumbach emmanuel.grumbach@intel.com Cc: Luca Coelho luciano.coelho@intel.com Cc: Intel Linux Wireless linuxwifi@intel.com Cc: Kalle Valo kvalo@codeaurora.org Cc: "David S. Miller" davem@davemloft.net Cc: Jakub Kicinski kuba@kernel.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200612073800.27742-1-jslaby@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c index bf2f00b892140..85b132a77787d 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c @@ -263,6 +263,8 @@ static int iwl_dbg_tlv_alloc_trigger(struct iwl_trans *trans, { struct iwl_fw_ini_trigger_tlv *trig = (void *)tlv->data; u32 tp = le32_to_cpu(trig->time_point); + struct iwl_ucode_tlv *dup = NULL; + int ret;
if (le32_to_cpu(tlv->length) < sizeof(*trig)) return -EINVAL; @@ -275,10 +277,20 @@ static int iwl_dbg_tlv_alloc_trigger(struct iwl_trans *trans, return -EINVAL; }
- if (!le32_to_cpu(trig->occurrences)) + if (!le32_to_cpu(trig->occurrences)) { + dup = kmemdup(tlv, sizeof(*tlv) + le32_to_cpu(tlv->length), + GFP_KERNEL); + if (!dup) + return -ENOMEM; + trig = (void *)dup->data; trig->occurrences = cpu_to_le32(-1); + tlv = dup; + } + + ret = iwl_dbg_tlv_add(tlv, &trans->dbg.time_point[tp].trig_list); + kfree(dup);
- return iwl_dbg_tlv_add(tlv, &trans->dbg.time_point[tp].trig_list); + return ret; }
static int (*dbg_tlv_alloc[])(struct iwl_trans *trans,
From: Geert Uytterhoeven geert@linux-m68k.org
[ Upstream commit e0484010ec05191a8edf980413fc92f28050c1cc ]
On sparc32, tcflag_t is "unsigned long", unlike on all other architectures, where it is "unsigned int":
drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’: include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~
As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t parameters to "unsigned int". While at it, use "%u" to format unsigned numbers.
Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/hso.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index bb8c34d746ab3..5f123a8cf68ed 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1390,8 +1390,9 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) unsigned long flags;
if (old) - hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", - tty->termios.c_cflag, old->c_cflag); + hso_dbg(0x16, "Termios called with: cflags new[%u] - old[%u]\n", + (unsigned int)tty->termios.c_cflag, + (unsigned int)old->c_cflag);
/* the actual setup */ spin_lock_irqsave(&serial->serial_lock, flags);
From: Paolo Pisati paolo.pisati@canonical.com
[ Upstream commit 651149f60376758a4759f761767965040f9e4464 ]
During setup(): ... for ns in h0 r1 h1 h2 h3 do create_ns ${ns} done ...
while in cleanup(): ... for n in h1 r1 h2 h3 h4 do ip netns del ${n} 2>/dev/null done ...
and after removing the stderr redirection in cleanup():
$ sudo ./fib_nexthop_multiprefix.sh ... TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ] Cannot remove namespace file "/run/netns/h4": No such file or directory $ echo $? 1
and a non-zero return code, make kselftests fail (even if the test itself is fine):
... not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1 ...
Signed-off-by: Paolo Pisati paolo.pisati@canonical.com Reviewed-by: David Ahern dsahern@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/fib_nexthop_multiprefix.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh index 9dc35a16e4159..51df5e305855a 100755 --- a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh +++ b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh @@ -144,7 +144,7 @@ setup()
cleanup() { - for n in h1 r1 h2 h3 h4 + for n in h0 r1 h1 h2 h3 do ip netns del ${n} 2>/dev/null done
From: Laurence Oberman loberman@redhat.com
[ Upstream commit 1d61e21852d3161f234b9656797669fe185c251b ]
This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver.
Signed-off-by: Laurence Oberman loberman@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index 9f5113639eaf0..4bccaafca8b28 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -1172,7 +1172,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) index, attn_bits, attn_acks, asserted_bits, deasserted_bits, p_sb_attn_sw->known_attn); } else if (asserted_bits == 0x100) { - DP_INFO(p_hwfn, "MFW indication via attention\n"); + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, + "MFW indication via attention\n"); } else { DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "MFW indication [deassertion]\n");
From: Paolo Pisati paolo.pisati@canonical.com
[ Upstream commit aba69d49fb49c9166596dd78926514173b7f9ab5 ]
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m:
$ sudo ./ip_defrag.sh + set -e + mktemp -u XXXXXX + readonly NETNS=ns-rGlXcw + trap cleanup EXIT + setup + ip netns add ns-rGlXcw + ip -netns ns-rGlXcw link set lo up + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 + cleanup + ip netns del ns-rGlXcw
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory
$ sudo modprobe nf_defrag_ipv6 $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh -rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
Signed-off-by: Paolo Pisati paolo.pisati@canonical.com Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/ip_defrag.sh | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/ip_defrag.sh b/tools/testing/selftests/net/ip_defrag.sh index 15d3489ecd9ce..ceb7ad4dbd945 100755 --- a/tools/testing/selftests/net/ip_defrag.sh +++ b/tools/testing/selftests/net/ip_defrag.sh @@ -6,6 +6,8 @@ set +x set -e
+modprobe -q nf_defrag_ipv6 + readonly NETNS="ns-$(mktemp -u XXXXXX)"
setup() {
From: Daniele Albano d.albano@gmail.com
[ Upstream commit 61710e437f2807e26a3402543bdbb7217a9c8620 ]
We currently filter these for timeout_remove/async_cancel/files_update, but we only should be filtering for fixed file and buffer select. This also causes a second read of sqe->flags, which isn't needed.
Just check req->flags for the relevant bits. This then allows these commands to be used in links, for example, like everything else.
Signed-off-by: Daniele Albano d.albano@gmail.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c index 51be3a20ade17..12ab983474dff 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4803,7 +4803,9 @@ static int io_timeout_remove_prep(struct io_kiocb *req, { if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; - if (sqe->flags || sqe->ioprio || sqe->buf_index || sqe->len) + if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT))) + return -EINVAL; + if (sqe->ioprio || sqe->buf_index || sqe->len) return -EINVAL;
req->timeout.addr = READ_ONCE(sqe->addr); @@ -5009,8 +5011,9 @@ static int io_async_cancel_prep(struct io_kiocb *req, { if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; - if (sqe->flags || sqe->ioprio || sqe->off || sqe->len || - sqe->cancel_flags) + if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT))) + return -EINVAL; + if (sqe->ioprio || sqe->off || sqe->len || sqe->cancel_flags) return -EINVAL;
req->cancel.addr = READ_ONCE(sqe->addr); @@ -5028,7 +5031,9 @@ static int io_async_cancel(struct io_kiocb *req) static int io_files_update_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) { - if (sqe->flags || sqe->ioprio || sqe->rw_flags) + if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT))) + return -EINVAL; + if (sqe->ioprio || sqe->rw_flags) return -EINVAL;
req->files_update.offset = READ_ONCE(sqe->off);
From: Oded Gabbay oded.gabbay@gmail.com
[ Upstream commit cea7a0449ea3fa4883bf5dc8397f000d6b67d6cd ]
Queue index is received from the user. Therefore, we must validate it before using it to access the queue props array.
Signed-off-by: Oded Gabbay oded.gabbay@gmail.com Reviewed-by: Tomer Tayar ttayar@habana.ai Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/command_submission.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c index 409276b6374d7..e7c8e7473226f 100644 --- a/drivers/misc/habanalabs/command_submission.c +++ b/drivers/misc/habanalabs/command_submission.c @@ -425,11 +425,19 @@ static int validate_queue_index(struct hl_device *hdev, struct asic_fixed_properties *asic = &hdev->asic_prop; struct hw_queue_properties *hw_queue_prop;
+ /* This must be checked here to prevent out-of-bounds access to + * hw_queues_props array + */ + if (chunk->queue_index >= HL_MAX_QUEUES) { + dev_err(hdev->dev, "Queue index %d is invalid\n", + chunk->queue_index); + return -EINVAL; + } + hw_queue_prop = &asic->hw_queues_props[chunk->queue_index];
- if ((chunk->queue_index >= HL_MAX_QUEUES) || - (hw_queue_prop->type == QUEUE_TYPE_NA)) { - dev_err(hdev->dev, "Queue index %d is invalid\n", + if (hw_queue_prop->type == QUEUE_TYPE_NA) { + dev_err(hdev->dev, "Queue index %d is not applicable\n", chunk->queue_index); return -EINVAL; }
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit 1e8fd3a97f2d83a7197876ceb4f37b4c2b00a0f3 ]
The implementation of s3fwrn5_recv_frame() is supposed to consume skb on all execution paths. Release skb before returning -ENODEV.
Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nfc/s3fwrn5/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c index 91d4d5b28a7d9..ba6c486d64659 100644 --- a/drivers/nfc/s3fwrn5/core.c +++ b/drivers/nfc/s3fwrn5/core.c @@ -198,6 +198,7 @@ int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, case S3FWRN5_MODE_FW: return s3fwrn5_fw_recv_frame(ndev, skb); default: + kfree_skb(skb); return -ENODEV; } }
From: Ming Lei ming.lei@redhat.com
[ Upstream commit 3f0dcfbcd2e162fc0a11c1f59b7acd42ee45f126 ]
I/O requests may be held in scheduler queue because of resource contention. The starvation scenario was handled properly in the regular completion path but we failed to account for it during I/O submission. This lead to the hang captured below. Make sure we run the queue when resource contention is encountered in the submission path.
[ 39.054963] scsi 13:0:0:0: rejecting I/O to dead device [ 39.058700] scsi 13:0:0:0: rejecting I/O to dead device [ 39.087855] sd 13:0:0:1: [sdd] Synchronizing SCSI cache [ 39.088909] scsi 13:0:0:1: rejecting I/O to dead device [ 39.095351] scsi 13:0:0:1: rejecting I/O to dead device [ 39.096962] scsi 13:0:0:1: rejecting I/O to dead device [ 247.021859] INFO: task scsi-stress-rem:813 blocked for more than 122 seconds. [ 247.023258] Not tainted 5.8.0-rc2 #8 [ 247.024069] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.025331] scsi-stress-rem D 0 813 802 0x00004000 [ 247.025334] Call Trace: [ 247.025354] __schedule+0x504/0x55f [ 247.027987] schedule+0x72/0xa8 [ 247.027991] blk_mq_freeze_queue_wait+0x63/0x8c [ 247.027994] ? do_wait_intr_irq+0x7a/0x7a [ 247.027996] blk_cleanup_queue+0x4b/0xc9 [ 247.028000] __scsi_remove_device+0xf6/0x14e [ 247.028002] scsi_remove_device+0x21/0x2b [ 247.029037] sdev_store_delete+0x58/0x7c [ 247.029041] kernfs_fop_write+0x10d/0x14f [ 247.031281] vfs_write+0xa2/0xdf [ 247.032670] ksys_write+0x6b/0xb3 [ 247.032673] do_syscall_64+0x56/0x82 [ 247.034053] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 247.034059] RIP: 0033:0x7f69f39e9008 [ 247.036330] Code: Bad RIP value. [ 247.036331] RSP: 002b:00007ffdd8116498 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.037613] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f69f39e9008 [ 247.039714] RDX: 0000000000000002 RSI: 000055cde92a0ab0 RDI: 0000000000000001 [ 247.039715] RBP: 000055cde92a0ab0 R08: 000000000000000a R09: 00007f69f3a79e80 [ 247.039716] R10: 000000000000000a R11: 0000000000000246 R12: 00007f69f3abb780 [ 247.039717] R13: 0000000000000002 R14: 00007f69f3ab6740 R15: 0000000000000002
Link: https://lore.kernel.org/r/20200720025435.812030-1-ming.lei@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig hch@lst.de Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Ming Lei ming.lei@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_lib.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b8b4366f12001..887b6a47f5dac 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -564,6 +564,15 @@ static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd) scsi_uninit_cmd(cmd); }
+static void scsi_run_queue_async(struct scsi_device *sdev) +{ + if (scsi_target(sdev)->single_lun || + !list_empty(&sdev->host->starved_list)) + kblockd_schedule_work(&sdev->requeue_work); + else + blk_mq_run_hw_queues(sdev->request_queue, true); +} + /* Returns false when no more bytes to process, true if there are more */ static bool scsi_end_request(struct request *req, blk_status_t error, unsigned int bytes) @@ -608,11 +617,7 @@ static bool scsi_end_request(struct request *req, blk_status_t error,
__blk_mq_end_request(req, error);
- if (scsi_target(sdev)->single_lun || - !list_empty(&sdev->host->starved_list)) - kblockd_schedule_work(&sdev->requeue_work); - else - blk_mq_run_hw_queues(q, true); + scsi_run_queue_async(sdev);
percpu_ref_put(&q->q_usage_counter); return false; @@ -1706,6 +1711,7 @@ static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx, */ if (req->rq_flags & RQF_DONTPREP) scsi_mq_uninit_cmd(cmd); + scsi_run_queue_async(sdev); break; } return ret;
From: Vincent Chen vincent.chen@sifive.com
[ Upstream commit 4cb699d0447be8e0906539f93cbe41e19598ee5a ]
It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init and kasan_early_init use uninitialized __sbi_rfence as executing the tlb_flush_all(). Actually, at this moment, only the CPU which is responsible for the system initialization enables the MMU. Other CPUs are parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be replaced by local_tlb_flush_all() to avoid using uninitialized __sbi_rfence.
Signed-off-by: Vincent Chen vincent.chen@sifive.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/mm/kasan_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c index ec0ca90dd9000..7a580c8ad6034 100644 --- a/arch/riscv/mm/kasan_init.c +++ b/arch/riscv/mm/kasan_init.c @@ -44,7 +44,7 @@ asmlinkage void __init kasan_early_init(void) (__pa(((uintptr_t) kasan_early_shadow_pmd))), __pgprot(_PAGE_TABLE)));
- flush_tlb_all(); + local_flush_tlb_all(); }
static void __init populate(void *start, void *end) @@ -79,7 +79,7 @@ static void __init populate(void *start, void *end) pfn_pgd(PFN_DOWN(__pa(&pmd[offset])), __pgprot(_PAGE_TABLE)));
- flush_tlb_all(); + local_flush_tlb_all(); memset(start, 0, end - start); }
From: Liam Beguin liambeguin@gmail.com
[ Upstream commit b344d6a83d01c52fddbefa6b3b4764da5b1022a0 ]
The kernel test bot reported[1] that using set_mask_bits on a u8 causes the following issue on parisc:
hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe': >> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer' >> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer' hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'
Add support for cmpxchg on u8 pointers.
[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Liam Beguin liambeguin@gmail.com Tested-by: Dave Anglin dave.anglin@bell.net Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/include/asm/cmpxchg.h | 2 ++ arch/parisc/lib/bitops.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)
diff --git a/arch/parisc/include/asm/cmpxchg.h b/arch/parisc/include/asm/cmpxchg.h index ab5c215cf46c3..0689585758717 100644 --- a/arch/parisc/include/asm/cmpxchg.h +++ b/arch/parisc/include/asm/cmpxchg.h @@ -60,6 +60,7 @@ extern void __cmpxchg_called_with_bad_pointer(void); extern unsigned long __cmpxchg_u32(volatile unsigned int *m, unsigned int old, unsigned int new_); extern u64 __cmpxchg_u64(volatile u64 *ptr, u64 old, u64 new_); +extern u8 __cmpxchg_u8(volatile u8 *ptr, u8 old, u8 new_);
/* don't worry...optimizer will get rid of most of this */ static inline unsigned long @@ -71,6 +72,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size) #endif case 4: return __cmpxchg_u32((unsigned int *)ptr, (unsigned int)old, (unsigned int)new_); + case 1: return __cmpxchg_u8((u8 *)ptr, (u8)old, (u8)new_); } __cmpxchg_called_with_bad_pointer(); return old; diff --git a/arch/parisc/lib/bitops.c b/arch/parisc/lib/bitops.c index 70ffbcf889b8e..2e4d1f05a9264 100644 --- a/arch/parisc/lib/bitops.c +++ b/arch/parisc/lib/bitops.c @@ -79,3 +79,15 @@ unsigned long __cmpxchg_u32(volatile unsigned int *ptr, unsigned int old, unsign _atomic_spin_unlock_irqrestore(ptr, flags); return (unsigned long)prev; } + +u8 __cmpxchg_u8(volatile u8 *ptr, u8 old, u8 new) +{ + unsigned long flags; + u8 prev; + + _atomic_spin_lock_irqsave(ptr, flags); + if ((prev = *ptr) == old) + *ptr = new; + _atomic_spin_unlock_irqrestore(ptr, flags); + return prev; +}
From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
[ Upstream commit 015c5d5e6aa3523c758a70eb87b291cece2dbbb4 ]
According to the report of [1], this driver is possible to cause the following error in ravb_tx_timeout_work().
ravb e6800000.ethernet ethernet: failed to switch device to config mode
This error means that the hardware could not change the state from "Operation" to "Configuration" while some tx and/or rx queue are operating. After that, ravb_config() in ravb_dmac_init() will fail, and then any descriptors will be not allocaled anymore so that NULL pointer dereference happens after that on ravb_start_xmit().
To fix the issue, the ravb_tx_timeout_work() should check the return values of ravb_stop_dma() and ravb_dmac_init(). If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX and just exits. If ravb_dmac_init() fails, just exits.
[1] https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@d...
Reported-by: Dirk Behme dirk.behme@de.bosch.com Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Sergei Shtylyov sergei.shtylyov@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/renesas/ravb_main.c | 26 ++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 067ad25553b92..ab335f7dab828 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1444,6 +1444,7 @@ static void ravb_tx_timeout_work(struct work_struct *work) struct ravb_private *priv = container_of(work, struct ravb_private, work); struct net_device *ndev = priv->ndev; + int error;
netif_tx_stop_all_queues(ndev);
@@ -1452,15 +1453,36 @@ static void ravb_tx_timeout_work(struct work_struct *work) ravb_ptp_stop(ndev);
/* Wait for DMA stopping */ - ravb_stop_dma(ndev); + if (ravb_stop_dma(ndev)) { + /* If ravb_stop_dma() fails, the hardware is still operating + * for TX and/or RX. So, this should not call the following + * functions because ravb_dmac_init() is possible to fail too. + * Also, this should not retry ravb_stop_dma() again and again + * here because it's possible to wait forever. So, this just + * re-enables the TX and RX and skip the following + * re-initialization procedure. + */ + ravb_rcv_snd_enable(ndev); + goto out; + }
ravb_ring_free(ndev, RAVB_BE); ravb_ring_free(ndev, RAVB_NC);
/* Device init */ - ravb_dmac_init(ndev); + error = ravb_dmac_init(ndev); + if (error) { + /* If ravb_dmac_init() fails, descriptors are freed. So, this + * should return here to avoid re-enabling the TX and RX in + * ravb_emac_init(). + */ + netdev_err(ndev, "%s: ravb_dmac_init() failed, error %d\n", + __func__, error); + return; + } ravb_emac_init(ndev);
+out: /* Initialise PTP Clock driver */ if (priv->chip_id == RCAR_GEN2) ravb_ptp_init(ndev, priv->pdev);
From: Paolo Pisati paolo.pisati@canonical.com
[ Upstream commit b346c0c85892cb8c53e8715734f71ba5bbec3387 ]
According to 'man 8 ip-netns', if `ip netns identify` returns an empty string, there's no net namespace associated with current PID: fix the net ns entrance logic.
Signed-off-by: Paolo Pisati paolo.pisati@canonical.com Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/txtimestamp.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/txtimestamp.sh b/tools/testing/selftests/net/txtimestamp.sh index eea6f5193693f..31637769f59f6 100755 --- a/tools/testing/selftests/net/txtimestamp.sh +++ b/tools/testing/selftests/net/txtimestamp.sh @@ -75,7 +75,7 @@ main() { fi }
-if [[ "$(ip netns identify)" == "root" ]]; then +if [[ -z "$(ip netns identify)" ]]; then ./in_netns.sh $0 $@ else main $@
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ]
This driver is not working because of problems of its receiving code. This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame to the LAPB module to process. After processing, the LAPB module passes the data (the packet) back to the driver, the driver should then add a one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the "x25_asy_data_indication" function are to correctly implement this procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter than 3 bytes. However the shortest frames are 2-byte long. So we need to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet edumazet@google.com Cc: Martin Schiller ms@dev.tdt.de Signed-off-by: Xie He xie.he.0141@gmail.com Reviewed-by: Martin Schiller ms@dev.tdt.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/x25_asy.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 69773d228ec17..84640a0c13f35 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -183,7 +183,7 @@ static inline void x25_asy_unlock(struct x25_asy *sl) netif_wake_queue(sl->dev); }
-/* Send one completely decapsulated IP datagram to the IP layer. */ +/* Send an LAPB frame to the LAPB module to process. */
static void x25_asy_bump(struct x25_asy *sl) { @@ -195,13 +195,12 @@ static void x25_asy_bump(struct x25_asy *sl) count = sl->rcount; dev->stats.rx_bytes += count;
- skb = dev_alloc_skb(count+1); + skb = dev_alloc_skb(count); if (skb == NULL) { netdev_warn(sl->dev, "memory squeeze, dropping packet\n"); dev->stats.rx_dropped++; return; } - skb_push(skb, 1); /* LAPB internal control */ skb_put_data(skb, sl->rbuff, count); skb->protocol = x25_type_trans(skb, sl->dev); err = lapb_data_received(skb->dev, skb); @@ -209,7 +208,6 @@ static void x25_asy_bump(struct x25_asy *sl) kfree_skb(skb); printk(KERN_DEBUG "x25_asy: data received err - %d\n", err); } else { - netif_rx(skb); dev->stats.rx_packets++; } } @@ -356,12 +354,21 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb, */
/* - * Called when I frame data arrives. We did the work above - throw it - * at the net layer. + * Called when I frame data arrive. We add a pseudo header for upper + * layers and pass it to upper layers. */
static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb) { + if (skb_cow(skb, 1)) { + kfree_skb(skb); + return NET_RX_DROP; + } + skb_push(skb, 1); + skb->data[0] = X25_IFACE_DATA; + + skb->protocol = x25_type_trans(skb, dev); + return netif_rx(skb); }
@@ -657,7 +664,7 @@ static void x25_asy_unesc(struct x25_asy *sl, unsigned char s) switch (s) { case X25_END: if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && - sl->rcount > 2) + sl->rcount >= 2) x25_asy_bump(sl); clear_bit(SLF_ESCAPE, &sl->flags); sl->rcount = 0;
From: Raviteja Narayanam raviteja.narayanam@xilinx.com
[ Upstream commit 0db9254d6b896b587759e2c844c277fb1a6da5b9 ]
This reverts commit d358def706880defa4c9e87381c5bf086a97d5f9.
There are two issues with "i2c: cadence: Fix the hold bit setting" commit.
1. In case of combined message request from user space, when the HOLD bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent on the bus even before the last message is started. This is because when the HOLD bit is cleared, the FIFOS are empty and there is no pending transfer. The STOP condition should occur only after the last message is completed.
2. The code added by the commit is redundant. Driver is handling the setting/clearing of HOLD bit in right way before the commit.
The setting of HOLD bit based on 'bus_hold_flag' is taken care in cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv functions.
The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and cdns_i2c_recv functions based on bus_hold_flag and byte count. Since clearing of HOLD bit is done after the slave address is written to the register (writing to address register triggers the message transfer), it is ensured that STOP condition occurs at the right time after completion of the pending transfer (last message).
Signed-off-by: Raviteja Narayanam raviteja.narayanam@xilinx.com Acked-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-cadence.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 89d58f7d2a253..97a0bd6ea31f1 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -382,10 +382,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->recv_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -442,11 +440,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->send_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; - cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
From: Raviteja Narayanam raviteja.narayanam@xilinx.com
[ Upstream commit 12d4d9ec5eeecd712c73772e422b6d082e66b046 ]
There are few issues on Zynq SOC observed in the stress tests causing timeout errors. Even though all the data is received, timeout error is thrown. This is due to an IP bug in which the COMP bit in ISR is not set at end of transfer and completion interrupt is not generated.
This bug is seen on Zynq platforms when the following condition occurs: Master read & HOLD bit set & Transfer size register reaches '0'.
One workaround is to clear the HOLD bit before the transfer size register reaches '0'. The current implementation checks for this at the start of the loop and also only for less than FIFO DEPTH case (ignoring the equal to case).
So clear the HOLD bit when the data yet to receive is less than or equal to the FIFO DEPTH. This avoids the IP bug condition.
Signed-off-by: Raviteja Narayanam raviteja.narayanam@xilinx.com Acked-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-cadence.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 97a0bd6ea31f1..1efdabb5adca0 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -230,20 +230,21 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) /* Read data if receive data valid is set */ while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_RXDV) { - /* - * Clear hold bit that was set for FIFO control if - * RX data left is less than FIFO depth, unless - * repeated start is selected. - */ - if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) && - !id->bus_hold_flag) - cdns_i2c_clear_bus_hold(id); - if (id->recv_count > 0) { *(id->p_recv_buf)++ = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET); id->recv_count--; id->curr_recv_count--; + + /* + * Clear hold bit that was set for FIFO control + * if RX data left is less than or equal to + * FIFO DEPTH unless repeated start is selected + */ + if (id->recv_count <= CDNS_I2C_FIFO_DEPTH && + !id->bus_hold_flag) + cdns_i2c_clear_bus_hold(id); + } else { dev_err(id->adap.dev.parent, "xfer_size reg rollover. xfer aborted!\n");
From: Josh Poimboeuf jpoimboe@redhat.com
[ Upstream commit 372a8eaa05998cd45b3417d0e0ffd3a70978211a ]
The ORC unwinder fails to unwind newly forked tasks which haven't yet run on the CPU. It correctly reads the 'ret_from_fork' instruction pointer from the stack, but it incorrectly interprets that value as a call stack address rather than a "signal" one, so the address gets incorrectly decremented in the call to orc_find(), resulting in bad ORC data.
Fix it by forcing 'ret_from_fork' frames to be signal frames.
Reported-by: Wang ShaoBo bobo.shaobowang@huawei.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Wang ShaoBo bobo.shaobowang@huawei.com Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.159499437... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/unwind_orc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c index 7f969b2d240fd..ec88bbe08a328 100644 --- a/arch/x86/kernel/unwind_orc.c +++ b/arch/x86/kernel/unwind_orc.c @@ -440,8 +440,11 @@ bool unwind_next_frame(struct unwind_state *state) /* * Find the orc_entry associated with the text address. * - * Decrement call return addresses by one so they work for sibling - * calls and calls to noreturn functions. + * For a call frame (as opposed to a signal frame), state->ip points to + * the instruction after the call. That instruction's stack layout + * could be different from the call instruction's layout, for example + * if the call was to a noreturn function. So get the ORC data for the + * call instruction itself. */ orc = orc_find(state->signal ? state->ip : state->ip - 1); if (!orc) { @@ -662,6 +665,7 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task, state->sp = task->thread.sp; state->bp = READ_ONCE_NOCHECK(frame->bp); state->ip = READ_ONCE_NOCHECK(frame->ret_addr); + state->signal = (void *)state->ip == ret_from_fork; }
if (get_stack_info((unsigned long *)state->sp, state->task,
From: Josh Poimboeuf jpoimboe@redhat.com
[ Upstream commit 039a7a30ec102ec866d382a66f87f6f7654f8140 ]
If a user task's stack is empty, or if it only has user regs, ORC reports it as a reliable empty stack. But arch_stack_walk_reliable() incorrectly treats it as unreliable.
That happens because the only success path for user tasks is inside the loop, which only iterates on non-empty stacks. Generally, a user task must end in a user regs frame, but an empty stack is an exception to that rule.
Thanks to commit 71c95825289f ("x86/unwind/orc: Fix error handling in __unwind_start()"), unwind_start() now sets state->error appropriately. So now for both ORC and FP unwinders, unwind_done() and !unwind_error() always means the end of the stack was successfully reached. So the success path for kthreads is no longer needed -- it can also be used for empty user tasks.
Reported-by: Wang ShaoBo bobo.shaobowang@huawei.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Wang ShaoBo bobo.shaobowang@huawei.com Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.159499437... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/stacktrace.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 6ad43fc44556e..2fd698e28e4d5 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -58,7 +58,6 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry, * or a page fault), which can make frame pointers * unreliable. */ - if (IS_ENABLED(CONFIG_FRAME_POINTER)) return -EINVAL; } @@ -81,10 +80,6 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry, if (unwind_error(&state)) return -EINVAL;
- /* Success path for non-user tasks, i.e. kthreads and idle tasks */ - if (!(task->flags & (PF_KTHREAD | PF_IDLE))) - return -EINVAL; - return 0; }
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit e6827d1abdc9b061a57d7b7d3019c4e99fabea2f ]
In the implementation of uld_send(), the skb is consumed on all execution paths except one. Release skb when returning NET_XMIT_DROP.
Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 28ce9856a0784..0f5ca68c98542 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2925,6 +2925,7 @@ static inline int uld_send(struct adapter *adap, struct sk_buff *skb, txq_info = adap->sge.uld_txq_info[tx_uld_type]; if (unlikely(!txq_info)) { WARN_ON(true); + kfree_skb(skb); return NET_XMIT_DROP; }
From: Pavel Begunkov asml.silence@gmail.com
[ Upstream commit 3e863ea3bb1a2203ae648eb272db0ce6a1a2072c ]
IOSQE_ASYNC branch of io_queue_sqe() is another place where an unitialised req->work can be accessed (i.e. prior io_req_init_async()). Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag.
Signed-off-by: Pavel Begunkov asml.silence@gmail.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/io_uring.c b/fs/io_uring.c index 12ab983474dff..5153286345714 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5794,6 +5794,7 @@ static void io_queue_sqe(struct io_kiocb *req, const struct io_uring_sqe *sqe) * Never try inline submit of IOSQE_ASYNC is set, go straight * to async execution. */ + io_req_init_async(req); req->work.flags |= IO_WQ_WORK_CONCURRENT; io_queue_async_work(req); } else {
From: Andrea Righi andrea.righi@canonical.com
[ Upstream commit c2c633106453611be07821f53dff9e93a9d1c3f0 ]
There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device:
1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi andrea.righi@canonical.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netfront.c | 64 +++++++++++++++++++++++++------------- 1 file changed, 42 insertions(+), 22 deletions(-)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 482c6c8b0fb7e..88280057e0321 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -63,6 +63,8 @@ module_param_named(max_queues, xennet_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, "Maximum number of queues per virtual interface");
+#define XENNET_TIMEOUT (5 * HZ) + static const struct ethtool_ops xennet_ethtool_ops;
struct netfront_cb { @@ -1334,12 +1336,15 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
netif_carrier_off(netdev);
- xenbus_switch_state(dev, XenbusStateInitialising); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) != - XenbusStateClosed && - xenbus_read_driver_state(dev->otherend) != - XenbusStateUnknown); + do { + xenbus_switch_state(dev, XenbusStateInitialising); + err = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) != + XenbusStateClosed && + xenbus_read_driver_state(dev->otherend) != + XenbusStateUnknown, XENNET_TIMEOUT); + } while (!err); + return netdev;
exit: @@ -2139,28 +2144,43 @@ static const struct attribute_group xennet_dev_group = { }; #endif /* CONFIG_SYSFS */
-static int xennet_remove(struct xenbus_device *dev) +static void xennet_bus_close(struct xenbus_device *dev) { - struct netfront_info *info = dev_get_drvdata(&dev->dev); - - dev_dbg(&dev->dev, "%s\n", dev->nodename); + int ret;
- if (xenbus_read_driver_state(dev->otherend) != XenbusStateClosed) { + if (xenbus_read_driver_state(dev->otherend) == XenbusStateClosed) + return; + do { xenbus_switch_state(dev, XenbusStateClosing); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) == - XenbusStateClosing || - xenbus_read_driver_state(dev->otherend) == - XenbusStateUnknown); + ret = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosing || + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosed || + xenbus_read_driver_state(dev->otherend) == + XenbusStateUnknown, + XENNET_TIMEOUT); + } while (!ret); + + if (xenbus_read_driver_state(dev->otherend) == XenbusStateClosed) + return;
+ do { xenbus_switch_state(dev, XenbusStateClosed); - wait_event(module_wq, - xenbus_read_driver_state(dev->otherend) == - XenbusStateClosed || - xenbus_read_driver_state(dev->otherend) == - XenbusStateUnknown); - } + ret = wait_event_timeout(module_wq, + xenbus_read_driver_state(dev->otherend) == + XenbusStateClosed || + xenbus_read_driver_state(dev->otherend) == + XenbusStateUnknown, + XENNET_TIMEOUT); + } while (!ret); +} + +static int xennet_remove(struct xenbus_device *dev) +{ + struct netfront_info *info = dev_get_drvdata(&dev->dev);
+ xennet_bus_close(dev); xennet_disconnect_backend(info);
if (info->netdev->reg_state == NETREG_REGISTERED)
From: Atish Patra atish.patra@wdc.com
[ Upstream commit d0d8aae64566b753c4330fbd5944b88af035f299 ]
Currently, maximum number of mapper pages are set to the pfn calculated from the memblock size of the memblock containing kernel. This will work until that memblock spans the entire memory. However, it will be set to a wrong value if there are multiple memblocks defined in kernel (e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Signed-off-by: Atish Patra atish.patra@wdc.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index fdc772f57edc3..753f2cdbeab8f 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -149,9 +149,9 @@ void __init setup_bootmem(void) /* Reserve from the start of the kernel to the end of the kernel */ memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
- set_max_mapnr(PFN_DOWN(mem_size)); max_pfn = PFN_DOWN(memblock_end_of_DRAM()); max_low_pfn = max_pfn; + set_max_mapnr(max_low_pfn);
#ifdef CONFIG_BLK_DEV_INITRD setup_initrd();
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 8754e1379e7089516a449821f88e1fe1ebbae5e1 ]
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers "lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the safety of skb_push. But in "lapbether", it is incorrectly called after skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of netif_rx, which is called by this function with "return netif_rx(skb);". So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2 logical issues: a) skb_push is not protected by skb_cow; b) An extra headroom of 1 byte is ensured after skb_push. This extra headroom has no use in this function. It also has no use in the upper-layer function that this function passes the skb to (x25_lapb_receive_frame in net/x25/x25_dev.c). So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet edumazet@google.com Cc: Martin Schiller ms@dev.tdt.de Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/hdlc_x25.c | 4 +++- drivers/net/wan/lapbether.c | 8 +++++--- 2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index c84536b03aa84..f70336bb6f524 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -71,8 +71,10 @@ static int x25_data_indication(struct net_device *dev, struct sk_buff *skb) { unsigned char *ptr;
- if (skb_cow(skb, 1)) + if (skb_cow(skb, 1)) { + kfree_skb(skb); return NET_RX_DROP; + }
skb_push(skb, 1); skb_reset_network_header(skb); diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index e30d91a38cfb6..b73b347ed731d 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -128,10 +128,12 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb) { unsigned char *ptr;
- skb_push(skb, 1); - - if (skb_cow(skb, 1)) + if (skb_cow(skb, 1)) { + kfree_skb(skb); return NET_RX_DROP; + } + + skb_push(skb, 1);
ptr = skb->data; *ptr = X25_IFACE_DATA;
From: Atish Patra atish.patra@wdc.com
[ Upstream commit fa5a198359053c8e21dcc2b39c0e13871059bc9f ]
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks.
Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place.
Signed-off-by: Atish Patra atish.patra@wdc.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/mm/init.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 753f2cdbeab8f..5e3dccf74ca92 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -125,26 +125,29 @@ void __init setup_bootmem(void) { struct memblock_region *reg; phys_addr_t mem_size = 0; + phys_addr_t total_mem = 0; + phys_addr_t mem_start, end = 0; phys_addr_t vmlinux_end = __pa_symbol(&_end); phys_addr_t vmlinux_start = __pa_symbol(&_start);
/* Find the memory region containing the kernel */ for_each_memblock(memory, reg) { - phys_addr_t end = reg->base + reg->size; - - if (reg->base <= vmlinux_start && vmlinux_end <= end) { - mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET); - - /* - * Remove memblock from the end of usable area to the - * end of region - */ - if (reg->base + mem_size < end) - memblock_remove(reg->base + mem_size, - end - reg->base - mem_size); - } + end = reg->base + reg->size; + if (!total_mem) + mem_start = reg->base; + if (reg->base <= vmlinux_start && vmlinux_end <= end) + BUG_ON(reg->size == 0); + total_mem = total_mem + reg->size; } - BUG_ON(mem_size == 0); + + /* + * Remove memblock from the end of usable area to the + * end of region + */ + mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET); + if (mem_start + mem_size < end) + memblock_remove(mem_start + mem_size, + end - mem_start - mem_size);
/* Reserve from the start of the kernel to the end of the kernel */ memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin