[PATCH AUTOSEL 6.0 01/44] Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
From: Aman Dhoot amandhoot12@gmail.com
[ Upstream commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 ]
The device works fine in native RMI mode, there is no reason to use legacy PS/2 mode with it.
Signed-off-by: Aman Dhoot amandhoot12@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index ffad142801b3..973a4c1d5d09 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -191,6 +191,7 @@ static const char * const smbus_pnp_ids[] = { "SYN3221", /* HP 15-ay000 */ "SYN323d", /* HP Spectre X360 13-w013dx */ "SYN3257", /* HP Envy 13-ad105ng */ + "SYN3286", /* HP Laptop 15-da3001TU */ NULL };
From: Sheng-Liang Pan sheng-liang.pan@quanta.corp-partner.google.com
[ Upstream commit a01aca4b05174b6dee2392ec44406f85e0f8bd46 ]
Add a compatible for Goodix touch screen chip GT7986U which is is expected to be fully compatible with a driver written for GT7375P.
Signed-off-by: Sheng-Liang Pan sheng-liang.pan@quanta.corp-partner.google.com Reviewed-by: Douglas Anderson dianders@chromium.org Acked-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/20221006185333.v7.3.I52e4b4b20e2eb0ae20f2a9bb198aa... Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/devicetree/bindings/input/goodix,gt7375p.yaml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index fe1c5016f7f3..1c191bc5a178 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -16,8 +16,11 @@ description:
properties: compatible: - items: + oneOf: - const: goodix,gt7375p + - items: + - const: goodix,gt7986u + - const: goodix,gt7375p
reg: enum:
From: Brent Mendelsohn mendiebm@gmail.com
[ Upstream commit d40b6529c6269cd5afddb1116a383cab9f126694 ]
This model requires an additional detection quirk to enable the internal microphone - BIOS doesn't seem to support AcpDmicConnected (nothing in acpidump output).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216590 Signed-off-by: Brent Mendelsohn mendiebm@gmail.com Reviewed-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20221024174227.4160-1-mendiebm@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 2cb50d5cf1a9..a868a890f00c 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -185,6 +185,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UM5302TA"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Alienware"), + DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"), + } + }, {} };
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 8bb0ac0e6f64ebdf15d963c26b028de391c9bcf9 ]
The Nanote UMPC-01 mini laptop has stereo speakers, while the default bytcht_es8316 settings assume a mono speaker setup. Add a quirk for this.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221025140942.509066-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcht_es8316.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 6432b83f616f..a935c5fd9edb 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -443,6 +443,13 @@ static const struct dmi_system_id byt_cht_es8316_quirk_table[] = { | BYT_CHT_ES8316_INTMIC_IN2_MAP | BYT_CHT_ES8316_JD_INVERTED), }, + { /* Nanote UMPC-01 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "RWC CO.,LTD"), + DMI_MATCH(DMI_PRODUCT_NAME, "UMPC-01"), + }, + .driver_data = (void *)BYT_CHT_ES8316_INTMIC_IN1_MAP, + }, { /* Teclast X98 Plus II */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 9a1d248bb4beaf1b43d17ba12481ee0629fa29b9 ]
Missing entry to find a machine driver for ES83x6-based platforms.
Link: https://github.com/thesofproject/linux/issues/3873 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20221031195836.250193-1-pierre-louis.bossart@linux... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/common/soc-acpi-intel-icl-match.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/sound/soc/intel/common/soc-acpi-intel-icl-match.c b/sound/soc/intel/common/soc-acpi-intel-icl-match.c index b032bc07de8b..d0062f2cd256 100644 --- a/sound/soc/intel/common/soc-acpi-intel-icl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-icl-match.c @@ -10,6 +10,11 @@ #include <sound/soc-acpi-intel-match.h> #include "../skylake/skl.h"
+static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static struct skl_machine_pdata icl_pdata = { .use_tplg_pcm = true, }; @@ -27,6 +32,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_icl_machines[] = { .drv_name = "sof_rt5682", .sof_tplg_filename = "sof-icl-rt5682.tplg", }, + { + .comp_ids = &essx_83x6, + .drv_name = "sof-essx8336", + .sof_tplg_filename = "sof-icl-es8336", /* the tplg suffix is added at run time */ + .tplg_quirk_mask = SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER | + SND_SOC_ACPI_TPLG_INTEL_SSP_MSB | + SND_SOC_ACPI_TPLG_INTEL_DMIC_NUMBER, + }, {}, }; EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_icl_machines);
From: Matti Vaittinen mazziesaccount@gmail.com
[ Upstream commit 7c919b619bcc68158921b1bd968f0e704549bbb6 ]
When noevents is true and small buffer is used the allocated memory for holding the data may be smaller than the hard-coded 64 bytes. This can cause the iio_generic_buffer to crash.
Following was recorded on beagle bone black with v6.0 kernel and the digit fix patch: https://lore.kernel.org/all/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dna... using valgrind;
==339== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info ==339== Command: /iio_generic_buffer -n kx022-accel -T0 -e -l 10 -a -w 2000000 ==339== Parent PID: 307 ==339== ==339== Syscall param read(buf) points to unaddressable byte(s) ==339== at 0x496BFA4: read (read.c:26) ==339== by 0x11699: main (iio_generic_buffer.c:724) ==339== Address 0x4ab3518 is 0 bytes after a block of size 160 alloc'd ==339== at 0x4864B70: malloc (vg_replace_malloc.c:381) ==339== by 0x115BB: main (iio_generic_buffer.c:677)
Fix this by always using the same size for reading as was used for data storage allocation.
Signed-off-by: Matti Vaittinen mazziesaccount@gmail.com Link: https://lore.kernel.org/r/Y0kMh0t5qUXJw3nQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnain... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/iio/iio_generic_buffer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c index 2491c54a5e4f..f8deae4e26a1 100644 --- a/tools/iio/iio_generic_buffer.c +++ b/tools/iio/iio_generic_buffer.c @@ -715,12 +715,12 @@ int main(int argc, char **argv) continue; }
- toread = buf_len; } else { usleep(timedelay); - toread = 64; }
+ toread = buf_len; + read_size = read(buf_fd, data, toread * scan_size); if (read_size < 0) { if (errno == EAGAIN) {
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 5d73263f9e7c54ccb20814dc50809b9deb9e2bc7 ]
Yet another hardware variant we need to handle.
Link: https://github.com/thesofproject/linux/issues/3873 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20221031195639.250062-1-pierre-louis.bossart@linux... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/hda/intel-dsp-config.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index b9eb3208f288..ae31bb127594 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -320,6 +320,11 @@ static const struct config_entry config_table[] = { {} } }, + { + .flags = FLAG_SOF, + .device = 0x34c8, + .codec_hid = &essx_83x6, + }, { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, .device = 0x34c8,
From: Kai Vehmanen kai.vehmanen@linux.intel.com
[ Upstream commit 003b786b678919e072c2b12ffa73901ef840963e ]
Originally in commit b2ebcf42a48f ("ASoC: SOF: free widgets in sof_tear_down_pipelines() for static pipelines"), freeing of pipeline components at suspend was only done with recent FW as there were known limitations in older firmware versions.
Tests show that if static pipelines are used, i.e. all pipelines are setup whenever firmware is powered up, the reverse action of freeing all components at power down, leads to firmware failures with also SOF2.0 and SOF2.1 based firmware.
The problems can be specific to certain topologies with e.g. components not prepared to be freed at suspend (as this did not happen with older SOF kernels).
To avoid hitting these problems when kernel is upgraded and used with an older firmware, bump the firmware requirement to SOF2.2 or newer. If an older firmware is used, and pipeline is a static one, do not free the components at suspend. This ensures the suspend flow remains backwards compatible with older firmware versions. This limitation does not apply if the product configuration is updated to dynamic pipelines.
The limitation is not linked to firmware ABI, as the interface to free pipeline components has been available already before ABI3.19. The problem is in the implementation, so firmware version should be used to decide whether it is safe to use the newer flow or not. This patch adds a new SOF_FW_VER() macro to compare SOF firmware release versions.
Link: https://github.com/thesofproject/sof/issues/6475 Signed-off-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20221101114913.1292671-1-kai.vehmanen@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/sound/sof/info.h | 4 ++++ sound/soc/sof/ipc3-topology.c | 15 ++++++++++----- 2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/include/sound/sof/info.h b/include/sound/sof/info.h index 65e86e4e9fd8..75193850ead0 100644 --- a/include/sound/sof/info.h +++ b/include/sound/sof/info.h @@ -36,6 +36,10 @@ enum sof_ipc_ext_data { SOF_IPC_EXT_USER_ABI_INFO = 4, };
+/* Build u32 number in format MMmmmppp */ +#define SOF_FW_VER(MAJOR, MINOR, PATCH) ((uint32_t)( \ + ((MAJOR) << 24) | ((MINOR) << 12) | (PATCH))) + /* FW version - SOF_IPC_GLB_VERSION */ struct sof_ipc_fw_version { struct sof_ipc_hdr hdr; diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c index a39b43850f0e..bf8a46463cec 100644 --- a/sound/soc/sof/ipc3-topology.c +++ b/sound/soc/sof/ipc3-topology.c @@ -2242,6 +2242,7 @@ static int sof_ipc3_tear_down_all_pipelines(struct snd_sof_dev *sdev, bool verif struct sof_ipc_fw_version *v = &sdev->fw_ready.version; struct snd_sof_widget *swidget; struct snd_sof_route *sroute; + bool dyn_widgets = false; int ret;
/* @@ -2251,12 +2252,14 @@ static int sof_ipc3_tear_down_all_pipelines(struct snd_sof_dev *sdev, bool verif * topology loading the sound card unavailable to open PCMs. */ list_for_each_entry(swidget, &sdev->widget_list, list) { - if (swidget->dynamic_pipeline_widget) + if (swidget->dynamic_pipeline_widget) { + dyn_widgets = true; continue; + }
- /* Do not free widgets for static pipelines with FW ABI older than 3.19 */ + /* Do not free widgets for static pipelines with FW older than SOF2.2 */ if (!verify && !swidget->dynamic_pipeline_widget && - v->abi_version < SOF_ABI_VER(3, 19, 0)) { + SOF_FW_VER(v->major, v->minor, v->micro) < SOF_FW_VER(2, 2, 0)) { swidget->use_count = 0; swidget->complete = 0; continue; @@ -2270,9 +2273,11 @@ static int sof_ipc3_tear_down_all_pipelines(struct snd_sof_dev *sdev, bool verif /* * Tear down all pipelines associated with PCMs that did not get suspended * and unset the prepare flag so that they can be set up again during resume. - * Skip this step for older firmware. + * Skip this step for older firmware unless topology has any + * dynamic pipeline (in which case the step is mandatory). */ - if (!verify && v->abi_version >= SOF_ABI_VER(3, 19, 0)) { + if (!verify && (dyn_widgets || SOF_FW_VER(v->major, v->minor, v->micro) >= + SOF_FW_VER(2, 2, 0))) { ret = sof_tear_down_left_over_pipelines(sdev); if (ret < 0) { dev_err(sdev->dev, "failed to tear down paused pipelines\n");
From: Lukas Wunner lukas@wunner.de
[ Upstream commit 038ee49fef18710bedd38b531d173ccd746b2d8d ]
RS485-enabled UART ports on TI Sitara SoCs with active-low polarity exhibit a Transmit Enable glitch on ->set_termios():
omap8250_restore_regs(), which is called from omap_8250_set_termios(), sets the TCRTLR bit in the MCR register and clears all other bits, including RTS. If RTS uses active-low polarity, it is now asserted for no reason.
The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR register. That variable is always zero, so the RTS bit is still cleared (incorrectly so if RTS is active-high).
(up->mcr is not, as one might think, a cache of the MCR register's current value. Rather, it only caches a single bit of that register, the AFE bit. And it only does so if the UART supports the AFE bit, which OMAP does not. For details see serial8250_do_set_termios() and serial8250_do_set_mctrl().)
Finally at the end of omap8250_restore_regs(), the MCR register is restored (and RTS deasserted) by a call to up->port.ops->set_mctrl() (which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().
So there's an RTS glitch between setting TCRTLR and calling serial8250_em485_stop_tx(). Avoid by using a read-modify-write when setting TCRTLR.
While at it, drop a redundant initialization of up->mcr. As explained above, the variable isn't used by the driver and it is already initialized to zero because it is part of the static struct serial8250_ports[] declared in 8250_core.c. (Static structs are initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)
Cc: Jan Kiszka jan.kiszka@siemens.com Cc: Su Bao Cheng baocheng.su@siemens.com Tested-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Signed-off-by: Lukas Wunner lukas@wunner.de Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.166427894... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_omap.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 38ee3e42251a..8b30ae553d0a 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -292,6 +292,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) { struct omap8250_priv *priv = up->port.private_data; struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up);
if (dma && dma->tx_running) { /* @@ -308,7 +309,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial8250_out_MCR(up, UART_MCR_TCRTLR); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr);
omap8250_update_scr(up, priv); @@ -324,7 +325,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0);
/* drop TCR + TLR access, we setup XON/XOFF later */ - serial8250_out_MCR(up, up->mcr); + serial8250_out_MCR(up, mcr); + serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -669,7 +671,6 @@ static int omap_8250_startup(struct uart_port *port)
pm_runtime_get_sync(port->dev);
- up->mcr = 0; serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
serial_out(up, UART_LCR, UART_LCR_WLEN8);
From: Fedor Pchelkin pchelkin@ispras.ru
[ Upstream commit acdab4cb4ba7e5f94d2b422ebd7bf4bf68178fb2 ]
This reverts commit 902e02ea9385373ce4b142576eef41c642703955.
The above commit is reverted as the usage of tx_mutex seems not to solve the problem described in 902e02ea9385 ("tty: n_gsm: avoid call of sleeping functions from atomic context") and just moves the bug to another place.
Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Reviewed-by: Daniel Starke daniel.starke@siemens.com Link: https://lore.kernel.org/r/20221008110221.13645-2-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/n_gsm.c | 53 +++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 01c112e2e214..e23225aff5d9 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -248,7 +248,7 @@ struct gsm_mux { bool constipated; /* Asked by remote to shut up */ bool has_devices; /* Devices were registered */
- struct mutex tx_mutex; + spinlock_t tx_lock; unsigned int tx_bytes; /* TX data outstanding */ #define TX_THRESH_HI 8192 #define TX_THRESH_LO 2048 @@ -680,6 +680,7 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) struct gsm_msg *msg; u8 *dp; int ocr; + unsigned long flags;
msg = gsm_data_alloc(gsm, addr, 0, control); if (!msg) @@ -701,10 +702,10 @@ static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
gsm_print_packet("Q->", addr, cr, control, NULL, 0);
- mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); list_add_tail(&msg->list, &gsm->tx_ctrl_list); gsm->tx_bytes += msg->len; - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); gsmld_write_trigger(gsm);
return 0; @@ -729,7 +730,7 @@ static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci) spin_unlock_irqrestore(&dlci->lock, flags);
/* Clear data packets in MUX write queue */ - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) { if (msg->addr != addr) continue; @@ -737,7 +738,7 @@ static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci) list_del(&msg->list); kfree(msg); } - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); }
/** @@ -1023,9 +1024,10 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) { - mutex_lock(&dlci->gsm->tx_mutex); + unsigned long flags; + spin_lock_irqsave(&dlci->gsm->tx_lock, flags); __gsm_data_queue(dlci, msg); - mutex_unlock(&dlci->gsm->tx_mutex); + spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); }
/** @@ -1037,7 +1039,7 @@ static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) * is data. Keep to the MRU of the mux. This path handles the usual tty * interface which is a byte stream with optional modem data. * - * Caller must hold the tx_mutex of the mux. + * Caller must hold the tx_lock of the mux. */
static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) @@ -1097,7 +1099,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) * is data. Keep to the MRU of the mux. This path handles framed data * queued as skbuffs to the DLCI. * - * Caller must hold the tx_mutex of the mux. + * Caller must hold the tx_lock of the mux. */
static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, @@ -1113,7 +1115,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, if (dlci->adaption == 4) overhead = 1;
- /* dlci->skb is locked by tx_mutex */ + /* dlci->skb is locked by tx_lock */ if (dlci->skb == NULL) { dlci->skb = skb_dequeue_tail(&dlci->skb_list); if (dlci->skb == NULL) @@ -1167,7 +1169,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, * Push an empty frame in to the transmit queue to update the modem status * bits and to transmit an optional break. * - * Caller must hold the tx_mutex of the mux. + * Caller must hold the tx_lock of the mux. */
static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci, @@ -1281,12 +1283,13 @@ static int gsm_dlci_data_sweep(struct gsm_mux *gsm)
static void gsm_dlci_data_kick(struct gsm_dlci *dlci) { + unsigned long flags; int sweep;
if (dlci->constipated) return;
- mutex_lock(&dlci->gsm->tx_mutex); + spin_lock_irqsave(&dlci->gsm->tx_lock, flags); /* If we have nothing running then we need to fire up */ sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO); if (dlci->gsm->tx_bytes == 0) { @@ -1297,7 +1300,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) } if (sweep) gsm_dlci_data_sweep(dlci->gsm); - mutex_unlock(&dlci->gsm->tx_mutex); + spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); }
/* @@ -1991,13 +1994,14 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) static void gsm_kick_timeout(struct work_struct *work) { struct gsm_mux *gsm = container_of(work, struct gsm_mux, kick_timeout.work); + unsigned long flags; int sent = 0;
- mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); /* If we have nothing running then we need to fire up */ if (gsm->tx_bytes < TX_THRESH_LO) sent = gsm_dlci_data_sweep(gsm); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags);
if (sent && debug & 4) pr_info("%s TX queue stalled\n", __func__); @@ -2527,7 +2531,6 @@ static void gsm_free_mux(struct gsm_mux *gsm) break; } } - mutex_destroy(&gsm->tx_mutex); mutex_destroy(&gsm->mutex); kfree(gsm->txframe); kfree(gsm->buf); @@ -2599,7 +2602,6 @@ static struct gsm_mux *gsm_alloc_mux(void) } spin_lock_init(&gsm->lock); mutex_init(&gsm->mutex); - mutex_init(&gsm->tx_mutex); kref_init(&gsm->ref); INIT_LIST_HEAD(&gsm->tx_ctrl_list); INIT_LIST_HEAD(&gsm->tx_data_list); @@ -2608,6 +2610,7 @@ static struct gsm_mux *gsm_alloc_mux(void) INIT_WORK(&gsm->tx_work, gsmld_write_task); init_waitqueue_head(&gsm->event); spin_lock_init(&gsm->control_lock); + spin_lock_init(&gsm->tx_lock);
gsm->t1 = T1; gsm->t2 = T2; @@ -2632,7 +2635,6 @@ static struct gsm_mux *gsm_alloc_mux(void) } spin_unlock(&gsm_mux_lock); if (i == MAX_MUX) { - mutex_destroy(&gsm->tx_mutex); mutex_destroy(&gsm->mutex); kfree(gsm->txframe); kfree(gsm->buf); @@ -2788,16 +2790,17 @@ static void gsmld_write_trigger(struct gsm_mux *gsm) static void gsmld_write_task(struct work_struct *work) { struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work); + unsigned long flags; int i, ret;
/* All outstanding control channel and control messages and one data * frame is sent. */ ret = -ENODEV; - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); if (gsm->tty) ret = gsm_data_kick(gsm); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags);
if (ret >= 0) for (i = 0; i < NUM_DLCI; i++) @@ -3005,6 +3008,7 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, const unsigned char *buf, size_t nr) { struct gsm_mux *gsm = tty->disc_data; + unsigned long flags; int space; int ret;
@@ -3012,13 +3016,13 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, return -ENODEV;
ret = -ENOBUFS; - mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); space = tty_write_room(tty); if (space >= nr) ret = tty->ops->write(tty, buf, nr); else set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags);
return ret; } @@ -3315,13 +3319,14 @@ static struct tty_ldisc_ops tty_ldisc_packet = { static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk) { struct gsm_mux *gsm = dlci->gsm; + unsigned long flags;
if (dlci->state != DLCI_OPEN || dlci->adaption != 2) return;
- mutex_lock(&gsm->tx_mutex); + spin_lock_irqsave(&gsm->tx_lock, flags); gsm_dlci_modem_output(gsm, dlci, brk); - mutex_unlock(&gsm->tx_mutex); + spin_unlock_irqrestore(&gsm->tx_lock, flags); }
/**
From: Fedor Pchelkin pchelkin@ispras.ru
[ Upstream commit 15743ae50e04aa907131e3ae8d66e9a2964ea232 ]
This reverts commit c9ab053e56ce13a949977398c8edc12e6c02fc95.
The above commit is reverted as it was a prerequisite for tx_mutex introduction and tx_mutex has been removed as it does not correctly work in order to protect tx data.
Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Reviewed-by: Daniel Starke daniel.starke@siemens.com Link: https://lore.kernel.org/r/20221008110221.13645-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/n_gsm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index e23225aff5d9..d6598ca3640f 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -256,7 +256,7 @@ struct gsm_mux { struct list_head tx_data_list; /* Pending data packets */
/* Control messages */ - struct delayed_work kick_timeout; /* Kick TX queuing on timeout */ + struct timer_list kick_timer; /* Kick TX queuing on timeout */ struct timer_list t2_timer; /* Retransmit timer for commands */ int cretries; /* Command retry counter */ struct gsm_control *pending_cmd;/* Our current pending command */ @@ -1009,7 +1009,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) gsm->tx_bytes += msg->len;
gsmld_write_trigger(gsm); - schedule_delayed_work(&gsm->kick_timeout, 10 * gsm->t1 * HZ / 100); + mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100); }
/** @@ -1984,16 +1984,16 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) }
/** - * gsm_kick_timeout - transmit if possible - * @work: work contained in our gsm object + * gsm_kick_timer - transmit if possible + * @t: timer contained in our gsm object * * Transmit data from DLCIs if the queue is empty. We can't rely on * a tty wakeup except when we filled the pipe so we need to fire off * new data ourselves in other cases. */ -static void gsm_kick_timeout(struct work_struct *work) +static void gsm_kick_timer(struct timer_list *t) { - struct gsm_mux *gsm = container_of(work, struct gsm_mux, kick_timeout.work); + struct gsm_mux *gsm = from_timer(gsm, t, kick_timer); unsigned long flags; int sent = 0;
@@ -2458,7 +2458,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc) }
/* Finish outstanding timers, making sure they are done */ - cancel_delayed_work_sync(&gsm->kick_timeout); + del_timer_sync(&gsm->kick_timer); del_timer_sync(&gsm->t2_timer);
/* Finish writing to ldisc */ @@ -2605,7 +2605,7 @@ static struct gsm_mux *gsm_alloc_mux(void) kref_init(&gsm->ref); INIT_LIST_HEAD(&gsm->tx_ctrl_list); INIT_LIST_HEAD(&gsm->tx_data_list); - INIT_DELAYED_WORK(&gsm->kick_timeout, gsm_kick_timeout); + timer_setup(&gsm->kick_timer, gsm_kick_timer, 0); timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); INIT_WORK(&gsm->tx_work, gsmld_write_task); init_waitqueue_head(&gsm->event);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit c7e37cc6240767f794678d11704935d49cc81d59 ]
On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver does not reset the controller at probe time, because sometimes the system firmware loads a config and resetting might loose this config.
On the Nanote UMPC-01 device OTOH the config is in flash of the controller, the controller needs a reset to load this; and the system firmware does not reset the controller on a cold boot.
To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try resetting the controller and then re-reading the config when encountering a config with 0 width/height/max_touch_num value and the controller has not already been reset by goodix_ts_probe().
This should be safe to do in general because normally we should never encounter a config with 0 width/height/max_touch_num. Doing this in general not only avoids the need for a DMI quirk, but also might help other systems.
Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Bastien Nocera hadess@hadess.net Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/goodix.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 21c0dddbe41d..25e6ba132bbc 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -1158,6 +1158,7 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+retry_read_config: /* Read configuration and apply touchscreen parameters */ goodix_read_config(ts);
@@ -1165,6 +1166,16 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) { + if (!ts->reset_controller_at_probe && + ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) { + dev_info(&ts->client->dev, "Config not set, resetting controller\n"); + /* Retry after a controller reset */ + ts->reset_controller_at_probe = true; + error = goodix_reset(ts); + if (error) + return error; + goto retry_read_config; + } dev_err(&ts->client->dev, "Invalid config (%d, %d, %d), using defaults\n", ts->prop.max_x, ts->prop.max_y, ts->max_touch_num);
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit c86df29d11dfba27c0a1f5039cd6fe387fbf4239 ]
The dispatcher function is currently abusing the ftrace __fentry__ call location for its own purposes -- this obviously gives trouble when the dispatcher and ftrace are both in use.
A previous solution tried using __attribute__((patchable_function_entry())) which works, except it is GCC-8+ only, breaking the build on the earlier still supported compilers. Instead use static_call() -- which has its own annotations and does not conflict with ftrace -- to rewrite the dispatch function.
By using: return static_call()(ctx, insni, bpf_func) you get a perfect forwarding tail call as function body (iow a single jmp instruction). By having the default static_call() target be bpf_dispatcher_nop_func() it retains the default behaviour (an indirect call to the argument function). Only once a dispatcher program is attached is the target rewritten to directly call the JIT'ed image.
Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Tested-by: Björn Töpel bjorn@kernel.org Tested-by: Jiri Olsa jolsa@kernel.org Acked-by: Björn Töpel bjorn@kernel.org Acked-by: Jiri Olsa jolsa@kernel.org Link: https://lkml.kernel.org/r/Y1/oBlK0yFk5c/Im@hirez.programming.kicks-ass.net Link: https://lore.kernel.org/bpf/20221103120647.796772565@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf.h | 39 ++++++++++++++++++++++++++++++++++++++- kernel/bpf/dispatcher.c | 22 ++++++++-------------- 2 files changed, 46 insertions(+), 15 deletions(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 80fc8a88c610..0466aa9cd46c 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -27,6 +27,7 @@ #include <linux/bpfptr.h> #include <linux/btf.h> #include <linux/rcupdate_trace.h> +#include <linux/static_call.h>
struct bpf_verifier_env; struct bpf_verifier_log; @@ -894,6 +895,10 @@ struct bpf_dispatcher { void *rw_image; u32 image_off; struct bpf_ksym ksym; +#ifdef CONFIG_HAVE_STATIC_CALL + struct static_call_key *sc_key; + void *sc_tramp; +#endif };
static __always_inline __nocfi unsigned int bpf_dispatcher_nop_func( @@ -911,6 +916,34 @@ struct bpf_trampoline *bpf_trampoline_get(u64 key, struct bpf_attach_target_info *tgt_info); void bpf_trampoline_put(struct bpf_trampoline *tr); int arch_prepare_bpf_dispatcher(void *image, void *buf, s64 *funcs, int num_funcs); + +/* + * When the architecture supports STATIC_CALL replace the bpf_dispatcher_fn + * indirection with a direct call to the bpf program. If the architecture does + * not have STATIC_CALL, avoid a double-indirection. + */ +#ifdef CONFIG_HAVE_STATIC_CALL + +#define __BPF_DISPATCHER_SC_INIT(_name) \ + .sc_key = &STATIC_CALL_KEY(_name), \ + .sc_tramp = STATIC_CALL_TRAMP_ADDR(_name), + +#define __BPF_DISPATCHER_SC(name) \ + DEFINE_STATIC_CALL(bpf_dispatcher_##name##_call, bpf_dispatcher_nop_func) + +#define __BPF_DISPATCHER_CALL(name) \ + static_call(bpf_dispatcher_##name##_call)(ctx, insnsi, bpf_func) + +#define __BPF_DISPATCHER_UPDATE(_d, _new) \ + __static_call_update((_d)->sc_key, (_d)->sc_tramp, (_new)) + +#else +#define __BPF_DISPATCHER_SC_INIT(name) +#define __BPF_DISPATCHER_SC(name) +#define __BPF_DISPATCHER_CALL(name) bpf_func(ctx, insnsi) +#define __BPF_DISPATCHER_UPDATE(_d, _new) +#endif + #define BPF_DISPATCHER_INIT(_name) { \ .mutex = __MUTEX_INITIALIZER(_name.mutex), \ .func = &_name##_func, \ @@ -922,25 +955,29 @@ int arch_prepare_bpf_dispatcher(void *image, void *buf, s64 *funcs, int num_func .name = #_name, \ .lnode = LIST_HEAD_INIT(_name.ksym.lnode), \ }, \ + __BPF_DISPATCHER_SC_INIT(_name##_call) \ }
#define DEFINE_BPF_DISPATCHER(name) \ + __BPF_DISPATCHER_SC(name); \ noinline __nocfi unsigned int bpf_dispatcher_##name##_func( \ const void *ctx, \ const struct bpf_insn *insnsi, \ bpf_func_t bpf_func) \ { \ - return bpf_func(ctx, insnsi); \ + return __BPF_DISPATCHER_CALL(name); \ } \ EXPORT_SYMBOL(bpf_dispatcher_##name##_func); \ struct bpf_dispatcher bpf_dispatcher_##name = \ BPF_DISPATCHER_INIT(bpf_dispatcher_##name); + #define DECLARE_BPF_DISPATCHER(name) \ unsigned int bpf_dispatcher_##name##_func( \ const void *ctx, \ const struct bpf_insn *insnsi, \ bpf_func_t bpf_func); \ extern struct bpf_dispatcher bpf_dispatcher_##name; + #define BPF_DISPATCHER_FUNC(name) bpf_dispatcher_##name##_func #define BPF_DISPATCHER_PTR(name) (&bpf_dispatcher_##name) void bpf_dispatcher_change_prog(struct bpf_dispatcher *d, struct bpf_prog *from, diff --git a/kernel/bpf/dispatcher.c b/kernel/bpf/dispatcher.c index fa64b80b8bca..7dfb8d0d5202 100644 --- a/kernel/bpf/dispatcher.c +++ b/kernel/bpf/dispatcher.c @@ -4,6 +4,7 @@ #include <linux/hash.h> #include <linux/bpf.h> #include <linux/filter.h> +#include <linux/static_call.h>
/* The BPF dispatcher is a multiway branch code generator. The * dispatcher is a mechanism to avoid the performance penalty of an @@ -104,17 +105,11 @@ static int bpf_dispatcher_prepare(struct bpf_dispatcher *d, void *image, void *b
static void bpf_dispatcher_update(struct bpf_dispatcher *d, int prev_num_progs) { - void *old, *new, *tmp; - u32 noff; - int err; - - if (!prev_num_progs) { - old = NULL; - noff = 0; - } else { - old = d->image + d->image_off; + void *new, *tmp; + u32 noff = 0; + + if (prev_num_progs) noff = d->image_off ^ (PAGE_SIZE / 2); - }
new = d->num_progs ? d->image + noff : NULL; tmp = d->num_progs ? d->rw_image + noff : NULL; @@ -128,11 +123,10 @@ static void bpf_dispatcher_update(struct bpf_dispatcher *d, int prev_num_progs) return; }
- err = bpf_arch_text_poke(d->func, BPF_MOD_JUMP, old, new); - if (err || !new) - return; + __BPF_DISPATCHER_UPDATE(d, new ?: &bpf_dispatcher_nop_func);
- d->image_off = noff; + if (new) + d->image_off = noff; }
void bpf_dispatcher_change_prog(struct bpf_dispatcher *d, struct bpf_prog *from,
From: Zhu Ning zhuning0077@gmail.com
[ Upstream commit 89cdb224f2abe37ec4ac21ba0d9ddeb5a6a9cf68 ]
The Speaker GPIO needs to be turned on slightly behind the codec turned on. It also need to be turned off slightly before the codec turned down. Current code uses delay in DAPM_EVENT to do it but the mdelay delays the DAPM itself and thus has no effect. A delayed_work is added to turn on the speaker. The Speaker is turned off in .trigger since trigger is called slightly before the DAPM events.
Signed-off-by: Zhu Ning zhuning@everest-semi.com
------------
v1: cancel delayed work while disabling speaker. Link: https://lore.kernel.org/r/20221028020456.90286-1-zhuning0077@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/sof_es8336.c | 60 ++++++++++++++++++++++------- 1 file changed, 46 insertions(+), 14 deletions(-)
diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c index 606cc3242a60..5c218a39ca20 100644 --- a/sound/soc/intel/boards/sof_es8336.c +++ b/sound/soc/intel/boards/sof_es8336.c @@ -63,6 +63,7 @@ struct sof_es8336_private { struct snd_soc_jack jack; struct list_head hdmi_pcm_list; bool speaker_en; + struct delayed_work pcm_pop_work; };
struct sof_hdmi_pcm { @@ -111,6 +112,46 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk headset at mic1 port enabled\n"); }
+static void pcm_pop_work_events(struct work_struct *work) +{ + struct sof_es8336_private *priv = + container_of(work, struct sof_es8336_private, pcm_pop_work.work); + + gpiod_set_value_cansleep(priv->gpio_speakers, priv->speaker_en); + + if (quirk & SOF_ES8336_HEADPHONE_GPIO) + gpiod_set_value_cansleep(priv->gpio_headphone, priv->speaker_en); + +} + +static int sof_8336_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_card *card = rtd->card; + struct sof_es8336_private *priv = snd_soc_card_get_drvdata(card); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + break; + + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_STOP: + if (priv->speaker_en == false) + if (substream->stream == 0) { + cancel_delayed_work(&priv->pcm_pop_work); + gpiod_set_value_cansleep(priv->gpio_speakers, true); + } + break; + default: + return -EINVAL; + } + + return 0; +} + static int sof_es8316_speaker_power_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -122,19 +163,7 @@ static int sof_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
priv->speaker_en = !SND_SOC_DAPM_EVENT_ON(event);
- if (SND_SOC_DAPM_EVENT_ON(event)) - msleep(70); - - gpiod_set_value_cansleep(priv->gpio_speakers, priv->speaker_en); - - if (!(quirk & SOF_ES8336_HEADPHONE_GPIO)) - return 0; - - if (SND_SOC_DAPM_EVENT_ON(event)) - msleep(70); - - gpiod_set_value_cansleep(priv->gpio_headphone, priv->speaker_en); - + queue_delayed_work(system_wq, &priv->pcm_pop_work, msecs_to_jiffies(70)); return 0; }
@@ -344,6 +373,7 @@ static int sof_es8336_hw_params(struct snd_pcm_substream *substream, /* machine stream operations */ static struct snd_soc_ops sof_es8336_ops = { .hw_params = sof_es8336_hw_params, + .trigger = sof_8336_trigger, };
static struct snd_soc_dai_link_component platform_component[] = { @@ -722,7 +752,8 @@ static int sof_es8336_probe(struct platform_device *pdev) }
INIT_LIST_HEAD(&priv->hdmi_pcm_list); - + INIT_DELAYED_WORK(&priv->pcm_pop_work, + pcm_pop_work_events); snd_soc_card_set_drvdata(card, priv);
if (mach->mach_params.dmic_num > 0) { @@ -751,6 +782,7 @@ static int sof_es8336_remove(struct platform_device *pdev) struct snd_soc_card *card = platform_get_drvdata(pdev); struct sof_es8336_private *priv = snd_soc_card_get_drvdata(card);
+ cancel_delayed_work(&priv->pcm_pop_work); gpiod_put(priv->gpio_speakers); device_remove_software_node(priv->codec_dev); put_device(priv->codec_dev);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 8e9ada1d0e72b4737df400fe1bba48dc42a68df7 ]
It seems that the Windows drivers for the ACPI0011 soc_button_array device use low level triggered IRQs rather then using edge triggering.
Some ACPI tables depend on this, directly poking the GPIO controller's registers to clear the trigger type when closing a laptop's/2-in-1's lid and re-instating the trigger when opening the lid again.
Linux sets the edge/level on which to trigger to both low+high since it is using edge type IRQs, the ACPI tables then ends up also setting the bit for level IRQs and since both low and high level have been selected by Linux we get an IRQ storm leading to soft lockups.
As a workaround for this the soc_button_array already contains a DMI quirk table with device models known to have this issue.
Add a module parameter for this so that users can easily test if their device is affected too and so that they can use the module parameter as a workaround.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20221106215320.67109-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/soc_button_array.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 480476121c01..50497dd05027 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -18,6 +18,10 @@ #include <linux/gpio.h> #include <linux/platform_device.h>
+static bool use_low_level_irq; +module_param(use_low_level_irq, bool, 0444); +MODULE_PARM_DESC(use_low_level_irq, "Use low-level triggered IRQ instead of edge triggered"); + struct soc_button_info { const char *name; int acpi_index; @@ -164,7 +168,8 @@ soc_button_device_create(struct platform_device *pdev, }
/* See dmi_use_low_level_irq[] comment */ - if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) { + if (!autorepeat && (use_low_level_irq || + dmi_check_system(dmi_use_low_level_irq))) { irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); gpio_keys[n_buttons].irq = irq; gpio_keys[n_buttons].gpio = -ENOENT;
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit e13757f52496444b994a7ac67b6e517a15d89bbc ]
Like on the Acer Switch 10 SW5-012, the Acer Switch V 10 SW5-017's _LID method messes with home- and power-button GPIO IRQ settings, causing an IRQ storm.
Add a quirk entry for the Acer Switch V 10 to the dmi_use_low_level_irq[] DMI quirk list, to use low-level IRQs on this model, fixing the IRQ storm.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20221106215320.67109-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/soc_button_array.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 50497dd05027..09489380afda 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -77,6 +77,13 @@ static const struct dmi_system_id dmi_use_low_level_irq[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), }, }, + { + /* Acer Switch V 10 SW5-017, same issue as Acer Switch 10 SW5-012. */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "SW5-017"), + }, + }, { /* * Acer One S1003. _LID method messes with power-button GPIO
From: Anjana Hari quic_ahari@quicinc.com
[ Upstream commit f04a2862f9c3f64962b8709c75d788efba6df26b ]
UFS reset pin offsets are wrongly configured for SC8280XP, correcting the same for both UFS instances here.
Signed-off-by: Anjana Hari quic_ahari@quicinc.com Signed-off-by: Bjorn Andersson quic_bjorande@quicinc.com Reviewed-by: Andrew Halaney ahalaney@redhat.com Tested-by: Andrew Halaney ahalaney@redhat.com # QDrive3 Link: https://lore.kernel.org/r/20221103181051.26912-1-quic_bjorande@quicinc.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/qcom/pinctrl-sc8280xp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-sc8280xp.c b/drivers/pinctrl/qcom/pinctrl-sc8280xp.c index aa2075390f3e..e96c00686a25 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc8280xp.c +++ b/drivers/pinctrl/qcom/pinctrl-sc8280xp.c @@ -1873,8 +1873,8 @@ static const struct msm_pingroup sc8280xp_groups[] = { [225] = PINGROUP(225, hs3_mi2s, phase_flag, _, _, _, _, egpio), [226] = PINGROUP(226, hs3_mi2s, phase_flag, _, _, _, _, egpio), [227] = PINGROUP(227, hs3_mi2s, phase_flag, _, _, _, _, egpio), - [228] = UFS_RESET(ufs_reset, 0xf1004), - [229] = UFS_RESET(ufs1_reset, 0xf3004), + [228] = UFS_RESET(ufs_reset, 0xf1000), + [229] = UFS_RESET(ufs1_reset, 0xf3000), [230] = SDC_QDSD_PINGROUP(sdc2_clk, 0xe8000, 14, 6), [231] = SDC_QDSD_PINGROUP(sdc2_cmd, 0xe8000, 11, 3), [232] = SDC_QDSD_PINGROUP(sdc2_data, 0xe8000, 9, 0),
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 26c263bf1847d4dadba016a0457c4c5f446407bf ]
There are yet a few more ASUS ZenBook models that require the deferred probe. At least, there are different ZenBook UX325x and UX425x models. Let's extend the DMI matching table entries for adapting those missing models.
Signed-off-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20221108142027.28480-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/i8042-x86ia64io.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 4fbec7bbecca..5043dc7b8fb3 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -114,18 +114,18 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_NEVER) }, { - /* ASUS ZenBook UX425UA */ + /* ASUS ZenBook UX425UA/QA */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425UA"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425"), }, .driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER) }, { - /* ASUS ZenBook UM325UA */ + /* ASUS ZenBook UM325UA/QA */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325"), }, .driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER) },
From: Olivier Moysan olivier.moysan@foss.st.com
[ Upstream commit 7d945b046be3d2605dbb1806e73095aadd7ae129 ]
Ensure that resources allocated by iio_channel_get_all_cb() are released on driver unbind.
Signed-off-by: Olivier Moysan olivier.moysan@foss.st.com Link: https://lore.kernel.org/r/20221109170849.273719-1-olivier.moysan@foss.st.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/stm/stm32_adfsdm.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c index 643fc8a17018..837c1848d9bf 100644 --- a/sound/soc/stm/stm32_adfsdm.c +++ b/sound/soc/stm/stm32_adfsdm.c @@ -304,6 +304,11 @@ static int stm32_adfsdm_dummy_cb(const void *data, void *private) return 0; }
+static void stm32_adfsdm_cleanup(void *data) +{ + iio_channel_release_all_cb(data); +} + static struct snd_soc_component_driver stm32_adfsdm_soc_platform = { .open = stm32_adfsdm_pcm_open, .close = stm32_adfsdm_pcm_close, @@ -350,6 +355,12 @@ static int stm32_adfsdm_probe(struct platform_device *pdev) if (IS_ERR(priv->iio_cb)) return PTR_ERR(priv->iio_cb);
+ ret = devm_add_action_or_reset(&pdev->dev, stm32_adfsdm_cleanup, priv->iio_cb); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to add action\n"); + return ret; + } + component = devm_kzalloc(&pdev->dev, sizeof(*component), GFP_KERNEL); if (!component) return -ENOMEM;
From: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com
[ Upstream commit 5e29500eba2aa19e1323df46f64dafcd4a327092 ]
When Xen domain configures MSI-X, the usual approach is to enable MSI-X together with masking all of them via the config space, then fill the table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via QEMU running in a stub domain.
Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE bit too.
Note the Xen hypervisor intercepts this write anyway, and may keep the PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the guest-requested state and will apply it eventually.
Signed-off-by: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com Reviewed-by: Jan Beulich jbeulich@suse.com Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingsl... Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/xen-pciback/conf_space_capability.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c index 5e53b4817f16..097316a74126 100644 --- a/drivers/xen/xen-pciback/conf_space_capability.c +++ b/drivers/xen/xen-pciback/conf_space_capability.c @@ -190,13 +190,16 @@ static const struct config_field caplist_pm[] = { };
static struct msi_msix_field_config { - u16 enable_bit; /* bit for enabling MSI/MSI-X */ - unsigned int int_type; /* interrupt type for exclusiveness check */ + u16 enable_bit; /* bit for enabling MSI/MSI-X */ + u16 allowed_bits; /* bits allowed to be changed */ + unsigned int int_type; /* interrupt type for exclusiveness check */ } msi_field_config = { .enable_bit = PCI_MSI_FLAGS_ENABLE, + .allowed_bits = PCI_MSI_FLAGS_ENABLE, .int_type = INTERRUPT_TYPE_MSI, }, msix_field_config = { .enable_bit = PCI_MSIX_FLAGS_ENABLE, + .allowed_bits = PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL, .int_type = INTERRUPT_TYPE_MSIX, };
@@ -229,7 +232,7 @@ static int msi_msix_flags_write(struct pci_dev *dev, int offset, u16 new_value, return 0;
if (!dev_data->allow_interrupt_control || - (new_value ^ old_value) & ~field_config->enable_bit) + (new_value ^ old_value) & ~field_config->allowed_bits) return PCIBIOS_SET_FAILED;
if (new_value & field_config->enable_bit) {
From: ruanjinjie ruanjinjie@huawei.com
[ Upstream commit c53717e1e3f0d0f9129b2e0dbc6dcc5e0a8132e9 ]
free_irq() is missing in case of error in platform_pci_probe(), fix that.
Signed-off-by: ruanjinjie ruanjinjie@huawei.com Reviewed-by: Oleksandr Tyshchenko oleksandr_tyshchenko@epam.com Link: https://lore.kernel.org/r/20221114112124.1965611-1-ruanjinjie@huawei.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/platform-pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index 18f0ed8b1f93..6ebd819338ec 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -144,7 +144,7 @@ static int platform_pci_probe(struct pci_dev *pdev, if (ret) { dev_warn(&pdev->dev, "Unable to set the evtchn callback " "err=%d\n", ret); - goto out; + goto irq_out; } }
@@ -152,13 +152,16 @@ static int platform_pci_probe(struct pci_dev *pdev, grant_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes); ret = gnttab_setup_auto_xlat_frames(grant_frames); if (ret) - goto out; + goto irq_out; ret = gnttab_init(); if (ret) goto grant_out; return 0; grant_out: gnttab_free_auto_xlat_frames(); +irq_out: + if (!xen_have_vector_callback) + free_irq(pdev->irq, pdev); out: pci_release_region(pdev, 0); mem_out:
From: Lennard Gäher gaeher@mpi-sws.org
[ Upstream commit 53e16a6e3e69425081f8352e13e9fd23bf1abfca ]
Previously, the s2idle quirk was only active for the 21A0 machine type of the P14s Gen2a product. This also enables it for the second 21A1 type, thus reducing wake-up times from s2idle.
Signed-off-by: Lennard Gäher gaeher@mpi-sws.org Suggested-by: Mario Limonciello mario.limonciello@amd.com Reviewed-by: Mario Limonciello mario.limonciello@amd.com Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2181 Link: https://lore.kernel.org/r/20221108072023.17069-1-gaeher@mpi-sws.org Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 2dbb9fc011a7..379dfd6fa1b2 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -4495,6 +4495,14 @@ static const struct dmi_system_id fwbug_list[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "21A0"), } }, + { + .ident = "P14s Gen2 AMD", + .driver_data = &quirk_s2idle_bug, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21A1"), + } + }, {} };
From: Xiongfeng Wang wangxiongfeng2@huawei.com
[ Upstream commit d0cdd85046b15089df71a50548617ac1025300d0 ]
pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before asus_wmi_set_xusb2pr() returns.
Signed-off-by: Xiongfeng Wang wangxiongfeng2@huawei.com Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-wmi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index eec7d0ed7cf2..8e1979b477a7 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1656,6 +1656,8 @@ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, cpu_to_le32(ports_available));
+ pci_dev_put(xhci_pdev); + pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n", orig_ports_available, ports_available); }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 1e817b889c7d8c14e7005258e15fec62edafe03c ]
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE through acer-wmi.
Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK (these devices have no other acer-wmi based functionality).
Cc: Rudolf Polzer rpolzer@google.com Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/acer-wmi.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index f1259d81d86d..df4c1f08f0c6 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -564,6 +564,15 @@ static const struct dmi_system_id acer_quirks[] __initconst = { }, .driver_data = (void *)ACER_CAP_KBD_DOCK, }, + { + .callback = set_force_caps, + .ident = "Acer Aspire Switch V 10 SW5-017", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SW5-017"), + }, + .driver_data = (void *)ACER_CAP_KBD_DOCK, + }, { .callback = set_force_caps, .ident = "Acer One 10 (S1003)",
From: Maximilian Luz luzmaximilian@gmail.com
[ Upstream commit d076f30957b1d026e9f6340691624926db0d369d ]
Add device nodes to enable support for battery and charger status, the ACPI platform profile, as well as internal and type-cover HID devices (including sensors, touchpad, keyboard, and other miscellaneous devices) on the Surface Pro 9.
This does not include support for a tablet-mode switch yet, as that is now handled via the POS subsystem (unlike the Surface Pro 8, where it is handled via the KIP subsystem) and therefore needs further changes.
While we're at it, also add the missing comment for the Surface Pro 8.
Signed-off-by: Maximilian Luz luzmaximilian@gmail.com Link: https://lore.kernel.org/r/20221113185951.224759-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../surface/surface_aggregator_registry.c | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 585911020cea..db82c2a7c567 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -268,6 +268,7 @@ static const struct software_node *ssam_node_group_sp7[] = { NULL, };
+/* Devices for Surface Pro 8 */ static const struct software_node *ssam_node_group_sp8[] = { &ssam_node_root, &ssam_node_hub_kip, @@ -284,6 +285,23 @@ static const struct software_node *ssam_node_group_sp8[] = { NULL, };
+/* Devices for Surface Pro 9 */ +static const struct software_node *ssam_node_group_sp9[] = { + &ssam_node_root, + &ssam_node_hub_kip, + &ssam_node_bat_ac, + &ssam_node_bat_main, + &ssam_node_tmp_pprof, + /* TODO: Tablet mode switch (via POS subsystem) */ + &ssam_node_hid_kip_keyboard, + &ssam_node_hid_kip_penstash, + &ssam_node_hid_kip_touchpad, + &ssam_node_hid_kip_fwupd, + &ssam_node_hid_sam_sensors, + &ssam_node_hid_sam_ucm_ucsi, + NULL, +}; +
/* -- SSAM platform/meta-hub driver. ---------------------------------------- */
@@ -303,6 +321,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = { /* Surface Pro 8 */ { "MSHW0263", (unsigned long)ssam_node_group_sp8 },
+ /* Surface Pro 9 */ + { "MSHW0343", (unsigned long)ssam_node_group_sp9 }, + /* Surface Book 2 */ { "MSHW0107", (unsigned long)ssam_node_group_gen5 },
From: Dillon Varone Dillon.Varone@amd.com
[ Upstream commit c149947b188c651b943c1d8ca1494d1a98a3e27f ]
[WHY?] DCN32 uses fclk pstate watermarks for dummy pstate, and must always be supported.
[HOW?] Validation needs to be run with fclk pstate latency set as the dummy pstate latency to get correct prefetch and bandwidth outputs.
Reviewed-by: Jun Lei Jun.Lei@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Dillon Varone Dillon.Varone@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index b9d3a4000c3d..6ed76e194423 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -1700,6 +1700,12 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, */ context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us; + /* For DCN32/321 need to validate with fclk pstate change latency equal to dummy so + * prefetch is scheduled correctly to account for dummy pstate. + */ + if (dummy_latency_index == 0) + context->bw_ctx.dml.soc.fclk_change_latency_us = + dc->clk_mgr->bw_params->dummy_pstate_table[dummy_latency_index].dummy_pstate_latency_us; dcn32_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, false); maxMpcComb = context->bw_ctx.dml.vba.maxMpcComb; dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb]; @@ -1879,6 +1885,10 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
context->perf_params.stutter_period_us = context->bw_ctx.dml.vba.StutterPeriod;
+ if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching && dummy_latency_index == 0) + context->bw_ctx.dml.soc.fclk_change_latency_us = + dc->clk_mgr->bw_params->dummy_pstate_table[dummy_latency_index].dummy_pstate_latency_us; + dcn32_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
if (!pstate_en) @@ -1886,8 +1896,12 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
- if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) + if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) { dcn30_setup_mclk_switch_using_fw_based_vblank_stretch(dc, context); + if (dummy_latency_index == 0) + context->bw_ctx.dml.soc.fclk_change_latency_us = + dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.fclk_change_latency_us; + } }
static void dcn32_get_optimal_dcfclk_fclk_for_uclk(unsigned int uclk_mts,
From: Guchun Chen guchun.chen@amd.com
[ Upstream commit 192039f12233c9063d040266e7c98188c7c89dec ]
Otherwise, some unexpected PCIE AER errors will be observed in runtime suspend/resume cycle.
Signed-off-by: Guchun Chen guchun.chen@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index 8292839bc42a..9ce0dcc5bb90 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -378,6 +378,10 @@ static void sienna_cichlid_check_bxco_support(struct smu_context *smu) ((adev->pdev->device == 0x73BF) && (adev->pdev->revision == 0xCF)) || ((adev->pdev->device == 0x7422) && + (adev->pdev->revision == 0x00)) || + ((adev->pdev->device == 0x73A3) && + (adev->pdev->revision == 0x00)) || + ((adev->pdev->device == 0x73E3) && (adev->pdev->revision == 0x00))) smu_baco->platform_support = false;
From: Eric Huang jinhuieric.huang@amd.com
[ Upstream commit 6f9eea4392a178af19360694b1db64f985d0b459 ]
It is to resolve a regression, which fails to allocate VRAM due to no free memory in application, the reason is we add check of vram_pin_size for memory limit, and application is pinning the memory for Peerdirect, KFD should not count it in memory limit. So removing vram_pin_size will resolve it.
Signed-off-by: Eric Huang jinhuieric.huang@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index 93ad00453f4b..7db4aef9c45c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -170,9 +170,7 @@ int amdgpu_amdkfd_reserve_mem_limit(struct amdgpu_device *adev, (kfd_mem_limit.ttm_mem_used + ttm_mem_needed > kfd_mem_limit.max_ttm_mem_limit) || (adev && adev->kfd.vram_used + vram_needed > - adev->gmc.real_vram_size - - atomic64_read(&adev->vram_pin_size) - - reserved_for_pt)) { + adev->gmc.real_vram_size - reserved_for_pt)) { ret = -ENOMEM; goto release; }
From: Damien Le Moal damien.lemoal@opensource.wdc.com
[ Upstream commit 7dd12d65ac646046a3fe0bbf9a4e86f4514207b3 ]
When an IO error occurs, the function __zonefs_io_error() is used to issue a zone report to obtain the latest zone information from the device. This function gets a zone report for all zones used as storage for a file, which is always 1 zone except for files representing aggregated conventional zones.
The number of zones of a zone report for a file is calculated in __zonefs_io_error() by doing a bit-shift of the inode i_zone_size field, which is equal to or larger than the device zone size. However, this calculation does not take into account that the last zone of a zoned device may be smaller than the zone size reported by bdev_zone_sectors() (which is used to set the bit shift size). As a result, if an error occurs for an IO targetting such last smaller zone, the zone report will ask for 0 zones, leading to an invalid zone report.
Fix this by using the fact that all files require a 1 zone report, except if the inode i_zone_size field indicates a zone size larger than the device zone size. This exception case corresponds to a mount with aggregated conventional zones.
A check for this exception is added to the file inode initialization during mount. If an invalid setup is detected, emit an error and fail the mount (check contributed by Johannes Thumshirn).
Signed-off-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/zonefs/super.c | 37 +++++++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 10 deletions(-)
diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index 860f0b1032c6..abc9a85106f2 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -478,14 +478,22 @@ static void __zonefs_io_error(struct inode *inode, bool write) struct super_block *sb = inode->i_sb; struct zonefs_sb_info *sbi = ZONEFS_SB(sb); unsigned int noio_flag; - unsigned int nr_zones = - zi->i_zone_size >> (sbi->s_zone_sectors_shift + SECTOR_SHIFT); + unsigned int nr_zones = 1; struct zonefs_ioerr_data err = { .inode = inode, .write = write, }; int ret;
+ /* + * The only files that have more than one zone are conventional zone + * files with aggregated conventional zones, for which the inode zone + * size is always larger than the device zone size. + */ + if (zi->i_zone_size > bdev_zone_sectors(sb->s_bdev)) + nr_zones = zi->i_zone_size >> + (sbi->s_zone_sectors_shift + SECTOR_SHIFT); + /* * Memory allocations in blkdev_report_zones() can trigger a memory * reclaim which may in turn cause a recursion into zonefs as well as @@ -1407,6 +1415,14 @@ static int zonefs_init_file_inode(struct inode *inode, struct blk_zone *zone, zi->i_ztype = type; zi->i_zsector = zone->start; zi->i_zone_size = zone->len << SECTOR_SHIFT; + if (zi->i_zone_size > bdev_zone_sectors(sb->s_bdev) << SECTOR_SHIFT && + !(sbi->s_features & ZONEFS_F_AGGRCNV)) { + zonefs_err(sb, + "zone size %llu doesn't match device's zone sectors %llu\n", + zi->i_zone_size, + bdev_zone_sectors(sb->s_bdev) << SECTOR_SHIFT); + return -EINVAL; + }
zi->i_max_size = min_t(loff_t, MAX_LFS_FILESIZE, zone->capacity << SECTOR_SHIFT); @@ -1456,11 +1472,11 @@ static struct dentry *zonefs_create_inode(struct dentry *parent, struct inode *dir = d_inode(parent); struct dentry *dentry; struct inode *inode; - int ret; + int ret = -ENOMEM;
dentry = d_alloc_name(parent, name); if (!dentry) - return NULL; + return ERR_PTR(ret);
inode = new_inode(parent->d_sb); if (!inode) @@ -1485,7 +1501,7 @@ static struct dentry *zonefs_create_inode(struct dentry *parent, dput: dput(dentry);
- return NULL; + return ERR_PTR(ret); }
struct zonefs_zone_data { @@ -1505,7 +1521,7 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, struct blk_zone *zone, *next, *end; const char *zgroup_name; char *file_name; - struct dentry *dir; + struct dentry *dir, *dent; unsigned int n = 0; int ret;
@@ -1523,8 +1539,8 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, zgroup_name = "seq";
dir = zonefs_create_inode(sb->s_root, zgroup_name, NULL, type); - if (!dir) { - ret = -ENOMEM; + if (IS_ERR(dir)) { + ret = PTR_ERR(dir); goto free; }
@@ -1570,8 +1586,9 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, * Use the file number within its group as file name. */ snprintf(file_name, ZONEFS_NAME_MAX - 1, "%u", n); - if (!zonefs_create_inode(dir, file_name, zone, type)) { - ret = -ENOMEM; + dent = zonefs_create_inode(dir, file_name, zone, type); + if (IS_ERR(dent)) { + ret = PTR_ERR(dent); goto free; }
From: Maximilian Luz luzmaximilian@gmail.com
[ Upstream commit 4a567d164d0e0c57e7b694b988db86361f130cb7 ]
Add device nodes to enable support for battery and charger status, the ACPI platform profile, as well as internal HID devices (including touchpad and keyboard) on the Surface Laptop 5.
Signed-off-by: Maximilian Luz luzmaximilian@gmail.com Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../surface/surface_aggregator_registry.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index db82c2a7c567..023f126121d7 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -234,6 +234,19 @@ static const struct software_node *ssam_node_group_sl3[] = { NULL, };
+/* Devices for Surface Laptop 5. */ +static const struct software_node *ssam_node_group_sl5[] = { + &ssam_node_root, + &ssam_node_bat_ac, + &ssam_node_bat_main, + &ssam_node_tmp_pprof, + &ssam_node_hid_main_keyboard, + &ssam_node_hid_main_touchpad, + &ssam_node_hid_main_iid5, + &ssam_node_hid_sam_ucm_ucsi, + NULL, +}; + /* Devices for Surface Laptop Studio. */ static const struct software_node *ssam_node_group_sls[] = { &ssam_node_root, @@ -345,6 +358,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = { /* Surface Laptop 4 (13", Intel) */ { "MSHW0250", (unsigned long)ssam_node_group_sl3 },
+ /* Surface Laptop 5 */ + { "MSHW0350", (unsigned long)ssam_node_group_sl5 }, + /* Surface Laptop Go 1 */ { "MSHW0118", (unsigned long)ssam_node_group_slg1 },
From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit 8b9b6a044b408283b086702b1d9e3cf4ba45b426 ]
Sometimes hp-wmi driver complains on system resume: [ 483.116451] hp_wmi: Unknown event_id - 33 - 0x0
According to HP it's a feature called "HP Smart Experience App" and it's safe to be ignored.
Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Link: https://lore.kernel.org/r/20221114073842.205392-1-kai.heng.feng@canonical.co... Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/hp-wmi.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 4fbe91769c91..788381e4c6a6 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -90,6 +90,7 @@ enum hp_wmi_event_ids { HPWMI_PEAKSHIFT_PERIOD = 0x0F, HPWMI_BATTERY_CHARGE_PERIOD = 0x10, HPWMI_SANITIZATION_MODE = 0x17, + HPWMI_SMART_EXPERIENCE_APP = 0x21, };
/* @@ -857,6 +858,8 @@ static void hp_wmi_notify(u32 value, void *context) break; case HPWMI_SANITIZATION_MODE: break; + case HPWMI_SMART_EXPERIENCE_APP: + break; default: pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data); break;
From: Arnav Rawat arnavr3@illinois.edu
[ Upstream commit 81a5603a0f50fd7cf17ff21d106052215eaf2028 ]
Commit 3ae86d2d4704 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops to manually toggle the fn-lock LED because the EC does not do it itself. However, the same WMI ID is also sent on some Yoga laptops. Here, setting the fn-lock state is not valid behavior, and causes the EC to spam interrupts until the laptop is rebooted.
Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to manually set the LED on models on this list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671 Cc: Meng Dong whenov@gmail.com Signed-off-by: Arnav Rawat arnavr3@illinois.edu Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora [hdegoede@redhat.com: Check DMI-id list only once and store the result] Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/ideapad-laptop.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index abd0c81d62c4..e789d4f56b40 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -136,6 +136,7 @@ struct ideapad_private { bool dytc : 1; bool fan_mode : 1; bool fn_lock : 1; + bool set_fn_lock_led : 1; bool hw_rfkill_switch : 1; bool kbd_bl : 1; bool touchpad_ctrl_via_ec : 1; @@ -1501,6 +1502,9 @@ static void ideapad_wmi_notify(u32 value, void *context) ideapad_input_report(priv, value); break; case 208: + if (!priv->features.set_fn_lock_led) + break; + if (!eval_hals(priv->adev->handle, &result)) { bool state = test_bit(HALS_FNLOCK_STATE_BIT, &result);
@@ -1514,6 +1518,18 @@ static void ideapad_wmi_notify(u32 value, void *context) } #endif
+/* On some models we need to call exec_sals(SALS_FNLOCK_ON/OFF) to set the LED */ +static const struct dmi_system_id set_fn_lock_led_list[] = { + { + /* https://bugzilla.kernel.org/show_bug.cgi?id=212671 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion R7000P2020H"), + } + }, + {} +}; + /* * Some ideapads have a hardware rfkill switch, but most do not have one. * Reading VPCCMD_R_RF always results in 0 on models without a hardware rfkill, @@ -1538,6 +1554,7 @@ static void ideapad_check_features(struct ideapad_private *priv) acpi_handle handle = priv->adev->handle; unsigned long val;
+ priv->features.set_fn_lock_led = dmi_check_system(set_fn_lock_led_list); priv->features.hw_rfkill_switch = dmi_check_system(hw_rfkill_list);
/* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit b44fd994e45112b58b6c1dec4451d9a925784589 ]
Add module parameters to allow setting the hw_rfkill_switch and set_fn_lock_led feature flags for testing these on laptops which are not on the DMI-id based allow lists for these 2 flags.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/ideapad-laptop.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index e789d4f56b40..9ab3cc02ad1b 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -155,7 +155,21 @@ MODULE_PARM_DESC(no_bt_rfkill, "No rfkill for bluetooth.");
static bool allow_v4_dytc; module_param(allow_v4_dytc, bool, 0444); -MODULE_PARM_DESC(allow_v4_dytc, "Enable DYTC version 4 platform-profile support."); +MODULE_PARM_DESC(allow_v4_dytc, + "Enable DYTC version 4 platform-profile support. " + "If you need this please report this to: platform-driver-x86@vger.kernel.org"); + +static bool hw_rfkill_switch; +module_param(hw_rfkill_switch, bool, 0444); +MODULE_PARM_DESC(hw_rfkill_switch, + "Enable rfkill support for laptops with a hw on/off wifi switch/slider. " + "If you need this please report this to: platform-driver-x86@vger.kernel.org"); + +static bool set_fn_lock_led; +module_param(set_fn_lock_led, bool, 0444); +MODULE_PARM_DESC(set_fn_lock_led, + "Enable driver based updates of the fn-lock LED on fn-lock changes. " + "If you need this please report this to: platform-driver-x86@vger.kernel.org");
/* * ACPI Helpers @@ -1554,8 +1568,10 @@ static void ideapad_check_features(struct ideapad_private *priv) acpi_handle handle = priv->adev->handle; unsigned long val;
- priv->features.set_fn_lock_led = dmi_check_system(set_fn_lock_led_list); - priv->features.hw_rfkill_switch = dmi_check_system(hw_rfkill_list); + priv->features.set_fn_lock_led = + set_fn_lock_led || dmi_check_system(set_fn_lock_led_list); + priv->features.hw_rfkill_switch = + hw_rfkill_switch || dmi_check_system(hw_rfkill_list);
/* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */ priv->features.touchpad_ctrl_via_ec = !acpi_dev_present("ELAN0634", NULL, -1);
From: Gleb Mazovetskiy glex.spb@gmail.com
[ Upstream commit aeac4ec8f46d610a10adbaeff5e2edf6a88ffc62 ]
On embedded systems with little memory and no relevant security concerns, it is beneficial to reduce the size of the table.
Reducing the size from 2^16 to 2^8 saves 255 KiB of kernel RAM.
Makes the table size configurable as an expert option.
The size was previously increased from 2^8 to 2^16 in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16").
Signed-off-by: Gleb Mazovetskiy glex.spb@gmail.com Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/Kconfig | 10 ++++++++++ net/ipv4/inet_hashtables.c | 10 +++++----- 2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index e983bb0c5012..2dfb12230f08 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -402,6 +402,16 @@ config INET_IPCOMP
If unsure, say Y.
+config INET_TABLE_PERTURB_ORDER + int "INET: Source port perturbation table size (as power of 2)" if EXPERT + default 16 + help + Source port perturbation table size (as power of 2) for + RFC 6056 3.3.4. Algorithm 4: Double-Hash Port Selection Algorithm. + + The default is almost always what you want. + Only change this if you know what you are doing. + config INET_XFRM_TUNNEL tristate select INET_TUNNEL diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index f5950a7172d6..1e45fe6276f7 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -679,13 +679,13 @@ EXPORT_SYMBOL_GPL(inet_unhash); * Note that we use 32bit integers (vs RFC 'short integers') * because 2^16 is not a multiple of num_ephemeral and this * property might be used by clever attacker. + * * RFC claims using TABLE_LENGTH=10 buckets gives an improvement, though - * attacks were since demonstrated, thus we use 65536 instead to really - * give more isolation and privacy, at the expense of 256kB of kernel - * memory. + * attacks were since demonstrated, thus we use 65536 by default instead + * to really give more isolation and privacy, at the expense of 256kB + * of kernel memory. */ -#define INET_TABLE_PERTURB_SHIFT 16 -#define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT) +#define INET_TABLE_PERTURB_SIZE (1 << CONFIG_INET_TABLE_PERTURB_ORDER) static u32 *table_perturb;
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
From: Keith Busch kbusch@kernel.org
[ Upstream commit c964d62f5cab7b43dd0534f22a96eab386c6ec5d ]
Device mappers had always been getting the default 511 dma mask, but the underlying device might have a larger alignment requirement. Since this value is used to determine alloweable direct-io alignment, this needs to be a stackable limit.
Signed-off-by: Keith Busch kbusch@kernel.org Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20221110184501.2451620-2-kbusch@meta.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-core.c | 1 - block/blk-settings.c | 8 +++++--- include/linux/blkdev.h | 15 ++++++++------- 3 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c index 651057c4146b..2fbdf17f2206 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -426,7 +426,6 @@ struct request_queue *blk_alloc_queue(int node_id, bool alloc_srcu) PERCPU_REF_INIT_ATOMIC, GFP_KERNEL)) goto fail_stats;
- blk_queue_dma_alignment(q, 511); blk_set_default_limits(&q->limits); q->nr_requests = BLKDEV_DEFAULT_RQ;
diff --git a/block/blk-settings.c b/block/blk-settings.c index 8bb9eef5310e..4949ed3ce7c9 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -57,6 +57,7 @@ void blk_set_default_limits(struct queue_limits *lim) lim->misaligned = 0; lim->zoned = BLK_ZONED_NONE; lim->zone_write_granularity = 0; + lim->dma_alignment = 511; } EXPORT_SYMBOL(blk_set_default_limits);
@@ -600,6 +601,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
t->io_min = max(t->io_min, b->io_min); t->io_opt = lcm_not_zero(t->io_opt, b->io_opt); + t->dma_alignment = max(t->dma_alignment, b->dma_alignment);
/* Set non-power-of-2 compatible chunk_sectors boundary */ if (b->chunk_sectors) @@ -773,7 +775,7 @@ EXPORT_SYMBOL(blk_queue_virt_boundary); **/ void blk_queue_dma_alignment(struct request_queue *q, int mask) { - q->dma_alignment = mask; + q->limits.dma_alignment = mask; } EXPORT_SYMBOL(blk_queue_dma_alignment);
@@ -795,8 +797,8 @@ void blk_queue_update_dma_alignment(struct request_queue *q, int mask) { BUG_ON(mask > PAGE_SIZE);
- if (mask > q->dma_alignment) - q->dma_alignment = mask; + if (mask > q->limits.dma_alignment) + q->limits.dma_alignment = mask; } EXPORT_SYMBOL(blk_queue_update_dma_alignment);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 84b13fdd34a7..79624711fda7 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -311,6 +311,13 @@ struct queue_limits { unsigned char discard_misaligned; unsigned char raid_partial_stripes_expensive; enum blk_zoned_model zoned; + + /* + * Drivers that set dma_alignment to less than 511 must be prepared to + * handle individual bvec's that are not a multiple of a SECTOR_SIZE + * due to possible offsets. + */ + unsigned int dma_alignment; };
typedef int (*report_zones_cb)(struct blk_zone *zone, unsigned int idx, @@ -456,12 +463,6 @@ struct request_queue { unsigned long nr_requests; /* Max # of requests */
unsigned int dma_pad_mask; - /* - * Drivers that set dma_alignment to less than 511 must be prepared to - * handle individual bvec's that are not a multiple of a SECTOR_SIZE - * due to possible offsets. - */ - unsigned int dma_alignment;
#ifdef CONFIG_BLK_INLINE_ENCRYPTION struct blk_crypto_profile *crypto_profile; @@ -1311,7 +1312,7 @@ static inline sector_t bdev_zone_sectors(struct block_device *bdev)
static inline int queue_dma_alignment(const struct request_queue *q) { - return q ? q->dma_alignment : 511; + return q ? q->limits.dma_alignment : 511; }
static inline unsigned int bdev_dma_alignment(struct block_device *bdev)
From: Keith Busch kbusch@kernel.org
[ Upstream commit b3228254bb6e91e57f920227f72a1a7d81925d81 ]
There are no external users of this function.
Signed-off-by: Keith Busch kbusch@kernel.org Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20221110184501.2451620-4-kbusch@meta.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-settings.c | 1 - block/blk.h | 1 + include/linux/blkdev.h | 1 - 3 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/block/blk-settings.c b/block/blk-settings.c index 4949ed3ce7c9..8ac1038d0c79 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -59,7 +59,6 @@ void blk_set_default_limits(struct queue_limits *lim) lim->zone_write_granularity = 0; lim->dma_alignment = 511; } -EXPORT_SYMBOL(blk_set_default_limits);
/** * blk_set_stacking_limits - set default limits for stacking devices diff --git a/block/blk.h b/block/blk.h index 52432eab621e..ff0bec16f0fa 100644 --- a/block/blk.h +++ b/block/blk.h @@ -324,6 +324,7 @@ void blk_rq_set_mixed_merge(struct request *rq); bool blk_rq_merge_ok(struct request *rq, struct bio *bio); enum elv_merge blk_try_merge(struct request *rq, struct bio *bio);
+void blk_set_default_limits(struct queue_limits *lim); int blk_dev_init(void);
/* diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 79624711fda7..e6bf06dc0770 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -946,7 +946,6 @@ extern void blk_queue_io_min(struct request_queue *q, unsigned int min); extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt); extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_queue_depth(struct request_queue *q, unsigned int depth); -extern void blk_set_default_limits(struct queue_limits *lim); extern void blk_set_stacking_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset);
From: Keith Busch kbusch@kernel.org
[ Upstream commit 29aa778bb66795e6a78b1c99beadc83887827868 ]
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly.
Signed-off-by: Keith Busch kbusch@kernel.org Reviewed-by: Mike Snitzer snitzer@kernel.org Link: https://lore.kernel.org/r/20221110184501.2451620-5-kbusch@meta.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-integrity.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index aaf2472df6e5..e1e7b205573f 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -3370,6 +3370,7 @@ static void dm_integrity_io_hints(struct dm_target *ti, struct queue_limits *lim limits->logical_block_size = ic->sectors_per_block << SECTOR_SHIFT; limits->physical_block_size = ic->sectors_per_block << SECTOR_SHIFT; blk_limits_io_min(limits, ic->sectors_per_block << SECTOR_SHIFT); + limits->dma_alignment = limits->logical_block_size - 1; } }
From: Keith Busch kbusch@kernel.org
[ Upstream commit 50a893359cd2643ee1afc96eedc9e7084cab49fa ]
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly.
Signed-off-by: Keith Busch kbusch@kernel.org Reviewed-by: Mike Snitzer snitzer@kernel.org Link: https://lore.kernel.org/r/20221110184501.2451620-6-kbusch@meta.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-log-writes.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c index 20fd688f72e7..178e13a5b059 100644 --- a/drivers/md/dm-log-writes.c +++ b/drivers/md/dm-log-writes.c @@ -875,6 +875,7 @@ static void log_writes_io_hints(struct dm_target *ti, struct queue_limits *limit limits->logical_block_size = bdev_logical_block_size(lc->dev->bdev); limits->physical_block_size = bdev_physical_block_size(lc->dev->bdev); limits->io_min = limits->physical_block_size; + limits->dma_alignment = limits->logical_block_size - 1; }
#if IS_ENABLED(CONFIG_FS_DAX)
From: Enrico Sau enrico.sau@gmail.com
[ Upstream commit e103ba33998d0f25653cc8ebe745b68d1ee10cda ]
Add the following Telit LE910C4-WWX composition:
0x103a: rmnet
Signed-off-by: Enrico Sau enrico.sau@gmail.com Acked-by: Bjørn Mork bjorn@mork.no Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 26c34a7c21bd..afd6faa4c2ec 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1357,6 +1357,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)}, /* Telit FN980 */
From: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com
[ Upstream commit 7d21fcfb409500dc9b114567f0ef8d30b3190dee ]
After it receives command reply, mpi3mr driver checks command result. If the result is not zero, it prints out command information. This debug information is confusing since they are printed even when the non-zero result is expected. "Power-on or device reset occurred" is printed for Test Unit Ready command at drive detection. Inquiry failure for unsupported VPD page header is also printed. They are harmless but look like failures.
To avoid the confusion, print the command reply debug information only when the module parameter logging_level has value MPI3_DEBUG_SCSI_ERROR= 64, in same manner as mpt3sas driver.
Signed-off-by: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com Link: https://lore.kernel.org/r/20221111014449.1649968-1-shinichiro.kawasaki@wdc.c... Reviewed-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/mpi3mr/mpi3mr_os.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c index bfa1165e23b6..1b4d1e562de8 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_os.c +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c @@ -2930,7 +2930,8 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, }
if (scmd->result != (DID_OK << 16) && (scmd->cmnd[0] != ATA_12) && - (scmd->cmnd[0] != ATA_16)) { + (scmd->cmnd[0] != ATA_16) && + mrioc->logging_level & MPI3_DEBUG_SCSI_ERROR) { ioc_info(mrioc, "%s :scmd->result 0x%x\n", __func__, scmd->result); scsi_print_command(scmd);
From: Zhou Guanghui zhouguanghui1@huawei.com
[ Upstream commit f014165faa7b953b81dcbf18835936e5f8d01f2a ]
If device_register() returns error, the name allocated by the dev_set_name() need be freed. As described in the comment of device_register(), we should use put_device() to give up the reference in the error path.
Fix this by calling put_device(), the name will be freed in the kobject_cleanup(), and this patch modified resources will be released by calling the corresponding callback function in the device_release().
Signed-off-by: Zhou Guanghui zhouguanghui1@huawei.com Link: https://lore.kernel.org/r/20221110033729.1555-1-zhouguanghui1@huawei.com Reviewed-by: Mike Christie michael.christie@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_transport_iscsi.c | 31 +++++++++++++++-------------- 1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index cd3db9684e52..f473c002fa4d 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -231,7 +231,7 @@ iscsi_create_endpoint(int dd_size) dev_set_name(&ep->dev, "ep-%d", id); err = device_register(&ep->dev); if (err) - goto free_id; + goto put_dev;
err = sysfs_create_group(&ep->dev.kobj, &iscsi_endpoint_group); if (err) @@ -245,10 +245,12 @@ iscsi_create_endpoint(int dd_size) device_unregister(&ep->dev); return NULL;
-free_id: +put_dev: mutex_lock(&iscsi_ep_idr_mutex); idr_remove(&iscsi_ep_idr, id); mutex_unlock(&iscsi_ep_idr_mutex); + put_device(&ep->dev); + return NULL; free_ep: kfree(ep); return NULL; @@ -766,7 +768,7 @@ iscsi_create_iface(struct Scsi_Host *shost, struct iscsi_transport *transport,
err = device_register(&iface->dev); if (err) - goto free_iface; + goto put_dev;
err = sysfs_create_group(&iface->dev.kobj, &iscsi_iface_group); if (err) @@ -780,9 +782,8 @@ iscsi_create_iface(struct Scsi_Host *shost, struct iscsi_transport *transport, device_unregister(&iface->dev); return NULL;
-free_iface: - put_device(iface->dev.parent); - kfree(iface); +put_dev: + put_device(&iface->dev); return NULL; } EXPORT_SYMBOL_GPL(iscsi_create_iface); @@ -1251,15 +1252,15 @@ iscsi_create_flashnode_sess(struct Scsi_Host *shost, int index,
err = device_register(&fnode_sess->dev); if (err) - goto free_fnode_sess; + goto put_dev;
if (dd_size) fnode_sess->dd_data = &fnode_sess[1];
return fnode_sess;
-free_fnode_sess: - kfree(fnode_sess); +put_dev: + put_device(&fnode_sess->dev); return NULL; } EXPORT_SYMBOL_GPL(iscsi_create_flashnode_sess); @@ -1299,15 +1300,15 @@ iscsi_create_flashnode_conn(struct Scsi_Host *shost,
err = device_register(&fnode_conn->dev); if (err) - goto free_fnode_conn; + goto put_dev;
if (dd_size) fnode_conn->dd_data = &fnode_conn[1];
return fnode_conn;
-free_fnode_conn: - kfree(fnode_conn); +put_dev: + put_device(&fnode_conn->dev); return NULL; } EXPORT_SYMBOL_GPL(iscsi_create_flashnode_conn); @@ -4815,7 +4816,7 @@ iscsi_register_transport(struct iscsi_transport *tt) dev_set_name(&priv->dev, "%s", tt->name); err = device_register(&priv->dev); if (err) - goto free_priv; + goto put_dev;
err = sysfs_create_group(&priv->dev.kobj, &iscsi_transport_group); if (err) @@ -4850,8 +4851,8 @@ iscsi_register_transport(struct iscsi_transport *tt) unregister_dev: device_unregister(&priv->dev); return NULL; -free_priv: - kfree(priv); +put_dev: + put_device(&priv->dev); return NULL; } EXPORT_SYMBOL_GPL(iscsi_register_transport);
From: Robin Murphy robin.murphy@arm.com
[ Upstream commit c2418f911a31a266af4fbaca998dc73d3676475a ]
Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with bus") quite some time ago, the GART driver has effectively disabled itself to avoid issues with the GPU driver expecting it to work in ways that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to IOMMU device registration") that bodge no longer works, but really the GPU driver should be responsible for its own behaviour anyway. Make the workaround explicit.
Reported-by: Jon Hunter jonathanh@nvidia.com Suggested-by: Dmitry Osipenko digetx@gmail.com Signed-off-by: Robin Murphy robin.murphy@arm.com Tested-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/tegra/drm.c | 4 ++++ drivers/gpu/host1x/dev.c | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 6748ec1e0005..a1f909dac89a 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -1093,6 +1093,10 @@ static bool host1x_drm_wants_iommu(struct host1x_device *dev) struct host1x *host1x = dev_get_drvdata(dev->dev.parent); struct iommu_domain *domain;
+ /* Our IOMMU usage policy doesn't currently play well with GART */ + if (of_machine_is_compatible("nvidia,tegra20")) + return false; + /* * If the Tegra DRM clients are backed by an IOMMU, push buffers are * likely to be allocated beyond the 32-bit boundary if sufficient diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index 0cd3f97e7e49..f60ea24db0ec 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -292,6 +292,10 @@ static void host1x_setup_virtualization_tables(struct host1x *host)
static bool host1x_wants_iommu(struct host1x *host1x) { + /* Our IOMMU usage policy doesn't currently play well with GART */ + if (of_machine_is_compatible("nvidia,tegra20")) + return false; + /* * If we support addressing a maximum of 32 bits of physical memory * and if the host1x firewall is enabled, there's no need to enable
From: Mikulas Patocka mpatocka@redhat.com
[ Upstream commit 5e5dab5ec763d600fe0a67837dd9155bdc42f961 ]
This commit flushes the journal on suspend. It is prerequisite for the next commit that enables activating dm integrity devices in read-only mode.
Note that we deliberately didn't flush the journal on suspend, so that the journal replay code would be tested. However, the dm-integrity code is 5 years old now, so that journal replay is well-tested, and we can make this change now.
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-integrity.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index e1e7b205573f..f26a6cd09e0c 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -2591,10 +2591,6 @@ static void integrity_writer(struct work_struct *w)
unsigned prev_free_sectors;
- /* the following test is not needed, but it tests the replay code */ - if (unlikely(dm_post_suspending(ic->ti)) && !ic->meta_dev) - return; - spin_lock_irq(&ic->endio_wait.lock); write_start = ic->committed_section; write_sections = ic->n_committed_sections; @@ -3101,8 +3097,7 @@ static void dm_integrity_postsuspend(struct dm_target *ti) drain_workqueue(ic->commit_wq);
if (ic->mode == 'J') { - if (ic->meta_dev) - queue_work(ic->writer_wq, &ic->writer_work); + queue_work(ic->writer_wq, &ic->writer_work); drain_workqueue(ic->writer_wq); dm_integrity_flush_buffers(ic, true); }
From: Mikulas Patocka mpatocka@redhat.com
[ Upstream commit 984bf2cc531e778e49298fdf6730e0396166aa21 ]
There was a problem that a user burned a dm-integrity image on CDROM and could not activate it because it had a non-empty journal.
Fix this problem by flushing the journal (done by the previous commit) and clearing the journal (done by this commit). Once the journal is cleared, dm-integrity won't attempt to replay it on the next activation.
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-integrity.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index f26a6cd09e0c..e97e9f97456d 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -263,6 +263,7 @@ struct dm_integrity_c {
struct completion crypto_backoff;
+ bool wrote_to_journal; bool journal_uptodate; bool just_formatted; bool recalculate_flag; @@ -2375,6 +2376,8 @@ static void integrity_commit(struct work_struct *w) if (!commit_sections) goto release_flush_bios;
+ ic->wrote_to_journal = true; + i = commit_start; for (n = 0; n < commit_sections; n++) { for (j = 0; j < ic->journal_section_entries; j++) { @@ -3100,6 +3103,14 @@ static void dm_integrity_postsuspend(struct dm_target *ti) queue_work(ic->writer_wq, &ic->writer_work); drain_workqueue(ic->writer_wq); dm_integrity_flush_buffers(ic, true); + if (ic->wrote_to_journal) { + init_journal(ic, ic->free_section, + ic->journal_sections - ic->free_section, ic->commit_seq); + if (ic->free_section) { + init_journal(ic, 0, ic->free_section, + next_commit_seq(ic->commit_seq)); + } + } }
if (ic->mode == 'B') { @@ -3127,6 +3138,8 @@ static void dm_integrity_resume(struct dm_target *ti)
DEBUG_print("resume\n");
+ ic->wrote_to_journal = false; + if (ic->provided_data_sectors != old_provided_data_sectors) { if (ic->provided_data_sectors > old_provided_data_sectors && ic->mode == 'B' &&
linux-stable-mirror@lists.linaro.org
-
Sasha Levin