Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com ---
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -3695,6 +3695,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
+ context_tracking_guest_exit(); + set_irq_happened(trap);
spin_lock(&vc->lock); @@ -3726,9 +3728,15 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
kvmppc_set_host_core(pcpu);
- guest_exit_irqoff(); - local_irq_enable(); + /* + * Wait until after servicing IRQs to account guest time so that any + * ticks that occurred while running the guest are properly accounted + * to the guest. Waiting until IRQs are enabled degrades the accuracy + * of accounting via context tracking, but the loss of accuracy is + * acceptable for all known use cases. + */ + vtime_account_guest_exit();
/* Let secondaries go back to the offline loop */ for (i = 0; i < controlled_threads; ++i) { @@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
srcu_read_unlock(&kvm->srcu, srcu_idx);
+ context_tracking_guest_exit(); + set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
- guest_exit_irqoff(); - local_irq_enable(); + /* + * Wait until after servicing IRQs to account guest time so that any + * ticks that occurred while running the guest are properly accounted + * to the guest. Waiting until IRQs are enabled degrades the accuracy + * of accounting via context tracking, but the loss of accuracy is + * acceptable for all known use cases. + */ + vtime_account_guest_exit();
cpumask_clear_cpu(pcpu, &kvm->arch.cpu_in_guest);
On Thu, 7 Oct 2021 16:28:56 +0200 Laurent Vivier lvivier@redhat.com wrote:
Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
Works for me. As you stated in your answer, someone can polish the code later on.
Reviewed-by: Greg Kurz groug@kaod.org
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -3695,6 +3695,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap);
spin_lock(&vc->lock); @@ -3726,9 +3728,15 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
/* Let secondaries go back to the offline loop */ for (i = 0; i < controlled_threads; ++i) { @@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, srcu_read_unlock(&kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
cpumask_clear_cpu(pcpu, &kvm->arch.cpu_in_guest);
Laurent Vivier lvivier@redhat.com writes:
Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c
...
@@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, srcu_read_unlock(&kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
This pops a warning for me, running guest(s) on Power8:
[ 270.745303][T16661] ------------[ cut here ]------------ [ 270.745374][T16661] WARNING: CPU: 72 PID: 16661 at arch/powerpc/kernel/time.c:311 vtime_account_kernel+0xe0/0xf0 [ 270.745397][T16661] Modules linked in: nf_conntrack_netlink xfrm_user xfrm_algo xt_addrtype xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink ip6table_filter ip6_tables iptable_filter tun overlay fuse kvm_hv kvm binfmt_misc squashfs mlx4_ib dm_multipath scsi_dh_rdac ib_uverbs scsi_dh_alua mlx4_en ib_core sr_mod cdrom lpfc bnx2x sg mlx4_core mdio crc_t10dif crct10dif_generic scsi_transport_fc vmx_crypto gf128mul leds_powernv crct10dif_vpmsum powernv_rng led_class crct10dif_common powernv_op_panel rng_core crc32c_vpmsum sunrpc ip_tables x_tables autofs4 [ 270.745565][T16661] CPU: 72 PID: 16661 Comm: qemu-system-ppc Not tainted 5.15.0-rc5-01885-g5e96f0599cff #1 [ 270.745578][T16661] NIP: c000000000027c20 LR: c00800000b6e9ca8 CTR: c000000000027b40 [ 270.745588][T16661] REGS: c00000081043f4f0 TRAP: 0700 Not tainted (5.15.0-rc5-01885-g5e96f0599cff) [ 270.745599][T16661] MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 22442222 XER: 20000000 [ 270.745635][T16661] CFAR: c000000000027b7c IRQMASK: 0 [ 270.745635][T16661] GPR00: c00800000b6e9ca8 c00000081043f790 c00000000248f900 c000000ffffda820 [ 270.745635][T16661] GPR04: c00000080b93b488 0000000000000006 00000000000f4240 c000001fffffc000 [ 270.745635][T16661] GPR08: 0000000ffa6f0000 0000000000000000 0000000000008002 c00800000b6ffba8 [ 270.745635][T16661] GPR12: c000000000027b40 c000000ffffd9e00 0000000000000001 0000000000000000 [ 270.745635][T16661] GPR16: 0000000000000000 c00000000254c0b0 0000000000000000 c000000941e84414 [ 270.745635][T16661] GPR20: 0000000000000001 0000000000000048 c00800000b710f0c 0000000000000001 [ 270.745635][T16661] GPR24: c000000941e90aa8 0000000000000000 c0000000024c6d60 0000000000000001 [ 270.745635][T16661] GPR28: c000000803222470 c00000080b93aa00 0000000000000008 c000000ffffd9e00 [ 270.745747][T16661] NIP [c000000000027c20] vtime_account_kernel+0xe0/0xf0 [ 270.745756][T16661] LR [c00800000b6e9ca8] kvmppc_run_core+0xda0/0x16c0 [kvm_hv] [ 270.745773][T16661] Call Trace: [ 270.745779][T16661] [c00000081043f790] [c00000081043f7d0] 0xc00000081043f7d0 (unreliable) [ 270.745793][T16661] [c00000081043f7d0] [c00800000b6e9ca8] kvmppc_run_core+0xda0/0x16c0 [kvm_hv] [ 270.745808][T16661] [c00000081043f950] [c00800000b6eee28] kvmppc_vcpu_run_hv+0x570/0xce0 [kvm_hv] [ 270.745823][T16661] [c00000081043fa10] [c00800000b5d2afc] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 270.745847][T16661] [c00000081043fa30] [c00800000b5ce728] kvm_arch_vcpu_ioctl_run+0x340/0x450 [kvm] [ 270.745870][T16661] [c00000081043fac0] [c00800000b5bc060] kvm_vcpu_ioctl+0x338/0x930 [kvm] [ 270.745890][T16661] [c00000081043fca0] [c00000000050b7b4] sys_ioctl+0x6b4/0x13b0 [ 270.745901][T16661] [c00000081043fdb0] [c00000000002fa54] system_call_exception+0x184/0x330 [ 270.745912][T16661] [c00000081043fe10] [c00000000000c84c] system_call_common+0xec/0x268 [ 270.745923][T16661] --- interrupt: c00 at 0x7fff9eb9f010 [ 270.745930][T16661] NIP: 00007fff9eb9f010 LR: 0000000136aa3670 CTR: 0000000000000000 [ 270.745937][T16661] REGS: c00000081043fe80 TRAP: 0c00 Not tainted (5.15.0-rc5-01885-g5e96f0599cff) [ 270.745945][T16661] MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 22444802 XER: 00000000 [ 270.745974][T16661] IRQMASK: 0 [ 270.745974][T16661] GPR00: 0000000000000036 00007fff9d5bdc30 00007fff9ec97100 000000000000000d [ 270.745974][T16661] GPR04: 000000002000ae80 0000000000000000 0000000000000000 0000000000000000 [ 270.745974][T16661] GPR08: 000000000000000d 0000000000000000 0000000000000000 0000000000000000 [ 270.745974][T16661] GPR12: 0000000000000000 00007fff9d5c6290 00007fff9ece4410 0000000000000000 [ 270.745974][T16661] GPR16: 00007fff9f970000 00007fff9ece0320 00007fff9d5bebe0 00007fff9f8d0028 [ 270.745974][T16661] GPR20: 0000000000000000 0000000000000000 00000001370fd068 000000002000ae80 [ 270.745974][T16661] GPR24: 00007fff9d7100ae 0000000000000000 00007fff9d5bf290 00007fff9d720010 [ 270.745974][T16661] GPR28: 00000001376611c0 00007fff9d720010 0000000000000000 000000002000ae80 [ 270.746064][T16661] NIP [00007fff9eb9f010] 0x7fff9eb9f010 [ 270.746071][T16661] LR [0000000136aa3670] 0x136aa3670 [ 270.746078][T16661] --- interrupt: c00 [ 270.746083][T16661] Instruction dump: [ 270.746090][T16661] 7c691a14 f89f0a40 f87f0a30 e8010010 eba1ffe8 ebc1fff0 ebe1fff8 7c0803a6 [ 270.746109][T16661] 4e800020 60000000 60000000 60420000 <0fe00000> 60000000 60000000 60420000 [ 270.746128][T16661] irq event stamp: 2118 [ 270.746133][T16661] hardirqs last enabled at (2117): [<c00800000b6e9c8c>] kvmppc_run_core+0xd84/0x16c0 [kvm_hv] [ 270.746146][T16661] hardirqs last disabled at (2118): [<c0000000000293dc>] interrupt_enter_prepare.constprop.0+0xfc/0x140 [ 270.746156][T16661] softirqs last enabled at (1940): [<c000000000fd6b8c>] __do_softirq+0x5ec/0x658 [ 270.746166][T16661] softirqs last disabled at (1935): [<c00000000011a6e8>] __irq_exit_rcu+0x158/0x1c0 [ 270.746176][T16661] ---[ end trace b1b029e8dc7c2667 ]---
cheers
On 13/10/2021 01:18, Michael Ellerman wrote:
Laurent Vivier lvivier@redhat.com writes:
Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c
...
@@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, srcu_read_unlock(&kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
This pops a warning for me, running guest(s) on Power8: [ 270.745303][T16661] ------------[ cut here ]------------ [ 270.745374][T16661] WARNING: CPU: 72 PID: 16661 at arch/powerpc/kernel/time.c:311 vtime_account_kernel+0xe0/0xf0
Thank you, I missed that...
My patch is wrong, I have to add vtime_account_guest_exit() before the local_irq_enable().
arch/powerpc/kernel/time.c
305 static unsigned long vtime_delta(struct cpu_accounting_data *acct, 306 unsigned long *stime_scaled, 307 unsigned long *steal_time) 308 { 309 unsigned long now, stime; 310 311 WARN_ON_ONCE(!irqs_disabled()); ...
But I don't understand how ticks can be accounted now if irqs are still disabled.
Not sure it is as simple as expected...
Thanks, Laurent
Excerpts from Laurent Vivier's message of October 13, 2021 7:30 pm:
On 13/10/2021 01:18, Michael Ellerman wrote:
Laurent Vivier lvivier@redhat.com writes:
Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c
...
@@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, srcu_read_unlock(&kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
This pops a warning for me, running guest(s) on Power8: [ 270.745303][T16661] ------------[ cut here ]------------ [ 270.745374][T16661] WARNING: CPU: 72 PID: 16661 at arch/powerpc/kernel/time.c:311 vtime_account_kernel+0xe0/0xf0
Thank you, I missed that...
My patch is wrong, I have to add vtime_account_guest_exit() before the local_irq_enable().
I thought so because if we take an interrupt after exiting the guest that should be accounted to kernel not guest.
arch/powerpc/kernel/time.c
305 static unsigned long vtime_delta(struct cpu_accounting_data *acct, 306 unsigned long *stime_scaled, 307 unsigned long *steal_time) 308 { 309 unsigned long now, stime; 310 311 WARN_ON_ONCE(!irqs_disabled()); ...
But I don't understand how ticks can be accounted now if irqs are still disabled.
Not sure it is as simple as expected...
I don't know all the timer stuff too well. The !CONFIG_VIRT_CPU_ACCOUNTING case is relying on PF_VCPU to be set when the host timer interrupt runs irqtime_account_process_tick runs so it can accumulate that tick to the guest?
That probably makes sense then, but it seems like we need that in a different place. Timer interrupts are not guaranteed to be the first one to occur when interrupts are enabled.
Maybe a new tick_account_guest_exit() and move PF_VCPU clearing to that for tick based accounting. Call it after local_irq_enable and call the vtime accounting before it. Would that work?
Thanks, Nick
On 15/10/2021 04:23, Nicholas Piggin wrote:
Excerpts from Laurent Vivier's message of October 13, 2021 7:30 pm:
On 13/10/2021 01:18, Michael Ellerman wrote:
Laurent Vivier lvivier@redhat.com writes:
Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c
...
@@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, srcu_read_unlock(&kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap); kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
This pops a warning for me, running guest(s) on Power8: [ 270.745303][T16661] ------------[ cut here ]------------ [ 270.745374][T16661] WARNING: CPU: 72 PID: 16661 at arch/powerpc/kernel/time.c:311 vtime_account_kernel+0xe0/0xf0
Thank you, I missed that...
My patch is wrong, I have to add vtime_account_guest_exit() before the local_irq_enable().
I thought so because if we take an interrupt after exiting the guest that should be accounted to kernel not guest.
arch/powerpc/kernel/time.c
305 static unsigned long vtime_delta(struct cpu_accounting_data *acct, 306 unsigned long *stime_scaled, 307 unsigned long *steal_time) 308 { 309 unsigned long now, stime; 310 311 WARN_ON_ONCE(!irqs_disabled()); ...
But I don't understand how ticks can be accounted now if irqs are still disabled.
Not sure it is as simple as expected...
I don't know all the timer stuff too well. The !CONFIG_VIRT_CPU_ACCOUNTING case is relying on PF_VCPU to be set when the host timer interrupt runs irqtime_account_process_tick runs so it can accumulate that tick to the guest?
That probably makes sense then, but it seems like we need that in a different place. Timer interrupts are not guaranteed to be the first one to occur when interrupts are enabled.
Maybe a new tick_account_guest_exit() and move PF_VCPU clearing to that for tick based accounting. Call it after local_irq_enable and call the vtime accounting before it. Would that work?
Hi Nick,
I think I will not have the time to have a look to fix that?
Could you try?
Thanks, Laurent
Excerpts from Laurent Vivier's message of October 20, 2021 4:29 pm:
On 15/10/2021 04:23, Nicholas Piggin wrote:
Excerpts from Laurent Vivier's message of October 13, 2021 7:30 pm:
On 13/10/2021 01:18, Michael Ellerman wrote:
Laurent Vivier lvivier@redhat.com writes:
Commit 112665286d08 moved guest_exit() in the interrupt protected area to avoid wrong context warning (or worse), but the tick counter cannot be updated and the guest time is accounted to the system time.
To fix the problem port to POWER the x86 fix 160457140187 ("Defer vtime accounting 'til after IRQ handling"):
"Defer the call to account guest time until after servicing any IRQ(s) that happened in the guest or immediately after VM-Exit. Tick-based accounting of vCPU time relies on PF_VCPU being set when the tick IRQ handler runs, and IRQs are blocked throughout the main sequence of vcpu_enter_guest(), including the call into vendor code to actually enter and exit the guest."
Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: npiggin@gmail.com Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Laurent Vivier lvivier@redhat.com
Notes: v2: remove reference to commit 61bd0f66ff92 cc stable 5.12 add the same comment in the code as for x86
arch/powerpc/kvm/book3s_hv.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2acb1c96cfaf..a694d1a8f6ce 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c
...
@@ -4506,13 +4514,21 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, srcu_read_unlock(&kvm->srcu, srcu_idx);
- context_tracking_guest_exit();
- set_irq_happened(trap); kvmppc_set_host_core(pcpu);
- guest_exit_irqoff();
- local_irq_enable();
- /*
* Wait until after servicing IRQs to account guest time so that any* ticks that occurred while running the guest are properly accounted* to the guest. Waiting until IRQs are enabled degrades the accuracy* of accounting via context tracking, but the loss of accuracy is* acceptable for all known use cases.*/- vtime_account_guest_exit();
This pops a warning for me, running guest(s) on Power8: [ 270.745303][T16661] ------------[ cut here ]------------ [ 270.745374][T16661] WARNING: CPU: 72 PID: 16661 at arch/powerpc/kernel/time.c:311 vtime_account_kernel+0xe0/0xf0
Thank you, I missed that...
My patch is wrong, I have to add vtime_account_guest_exit() before the local_irq_enable().
I thought so because if we take an interrupt after exiting the guest that should be accounted to kernel not guest.
arch/powerpc/kernel/time.c
305 static unsigned long vtime_delta(struct cpu_accounting_data *acct, 306 unsigned long *stime_scaled, 307 unsigned long *steal_time) 308 { 309 unsigned long now, stime; 310 311 WARN_ON_ONCE(!irqs_disabled()); ...
But I don't understand how ticks can be accounted now if irqs are still disabled.
Not sure it is as simple as expected...
I don't know all the timer stuff too well. The !CONFIG_VIRT_CPU_ACCOUNTING case is relying on PF_VCPU to be set when the host timer interrupt runs irqtime_account_process_tick runs so it can accumulate that tick to the guest?
That probably makes sense then, but it seems like we need that in a different place. Timer interrupts are not guaranteed to be the first one to occur when interrupts are enabled.
Maybe a new tick_account_guest_exit() and move PF_VCPU clearing to that for tick based accounting. Call it after local_irq_enable and call the vtime accounting before it. Would that work?
Hi Nick,
I think I will not have the time to have a look to fix that?
Could you try?
Hey Laurent, sure I can take a look at it.
Thanks, Nick
linux-stable-mirror@lists.linaro.org
-
Greg Kurz -
Laurent Vivier -
Michael Ellerman -
Nicholas Piggin