The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes") Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee ryder.lee@mediatek.com --- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index fe0c875..14a1028 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -227,16 +227,6 @@ #reset-cells = <1>; };
- timer: timer@10004000 { - compatible = "mediatek,mt7622-timer", - "mediatek,mt6577-timer"; - reg = <0 0x10004000 0 0x80>; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_APXGPT_PD>, - <&topckgen CLK_TOP_RTC>; - clock-names = "system-clk", "rtc-clk"; - }; - scpsys: scpsys@10006000 { compatible = "mediatek,mt7622-scpsys", "syscon";
On Mon, Nov 12, 2018 at 09:28:08AM +0800, Ryder Lee wrote:
The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes") Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee ryder.lee@mediatek.com
To confirm: the patch this fixes was added in v4.20-rc1, which means that this current patch doesn't apply to any of the stable trees.
Did we miss something?
-- Thanks, Sasha
On Sun, 2018-11-11 at 21:45 -0500, Sasha Levin wrote:
On Mon, Nov 12, 2018 at 09:28:08AM +0800, Ryder Lee wrote:
The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes") Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee ryder.lee@mediatek.com
To confirm: the patch this fixes was added in v4.20-rc1, which means that this current patch doesn't apply to any of the stable trees.
Did we miss something?
I didn't see any fixup for this?
Ryder
On Mon, 2018-11-12 at 11:33 +0800, Ryder Lee wrote:
On Sun, 2018-11-11 at 21:45 -0500, Sasha Levin wrote:
On Mon, Nov 12, 2018 at 09:28:08AM +0800, Ryder Lee wrote:
The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes") Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee ryder.lee@mediatek.com
To confirm: the patch this fixes was added in v4.20-rc1, which means that this current patch doesn't apply to any of the stable trees.
Did we miss something?
I didn't see any fixup for this?
Ryder
Oh, I didn't get it right. Yes, there is no need to apply to the stable trees.
@Matthias, could you help to drop the CC tag when you take this patch through your tree?
Sorry for the inconvenience.
Thanks Ryder
On 12/11/2018 02:28, Ryder Lee wrote:
The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
I suppose the root cause is, that the driver doesn't check the error timer_of_init returned.
Would you mind to test the following patch to see if this fixes the problem?
--->8
From be91e56ed527261137335af340845eb3dd3dd33a Mon Sep 17 00:00:00 2001
From: Matthias Brugger matthias.bgg@gmail.com Date: Fri, 23 Nov 2018 17:04:08 +0100 Subject: [PATCH] clocksource/drivers/timer-mediatek: error out on probe defer
If the clocks are not yet present, because they are loaded after the timer is initialized, we are unable to boot. Check if the return value of timer_of_init and return on EPROBE_DEFER.
Error seen is: [ 0.008337] Failed to get clock for /timer@10004000 [ 0.013435] WARNING: CPU: 0 PID: 0 at ../drivers/clk/clk.c:3615 __clk_put+0xf0/0x120 [ 0.021453] Modules linked in: [ 0.024614] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0-rc1-00063-g2859d9abd7e8 #2 [ 0.032902] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.038580] pstate: 20000085 (nzCv daIf -PAN -UAO) [ 0.043538] pc : __clk_put+0xf0/0x120 [ 0.047328] lr : clk_put+0xc/0x18 [ 0.050753] sp : ffff000009163ed0 [ 0.054178] x29: ffff000009163ed0 x28: 0000000041010018 [ 0.059676] x27: 0000000000000000 x26: 0000000000000000 [ 0.065174] x25: ffff0000090cb008 x24: ffff80001dfd7800 [ 0.070672] x23: ffff000008f934b8 x22: ffff80001dfdeae0 [ 0.076169] x21: ffff80001dfdeae0 x20: fffffffffffffdfb [ 0.081668] x19: ffff00000929ac40 x18: ffffffffffffffff [ 0.087166] x17: 0000000000000000 x16: 0000000000000000 [ 0.092664] x15: ffff0000091696c8 x14: ffff0000892cd70f [ 0.098162] x13: ffff0000092cd71d x12: ffff000009181348 [ 0.103661] x11: ffff000009181000 x10: 0000000005f5e0ff [ 0.109159] x9 : 0000000000000040 x8 : ffff000009181400 [ 0.114657] x7 : ffff80001c800270 x6 : 0000000000000000 [ 0.120155] x5 : ffff80001c800248 x4 : 0000000000000000 [ 0.125653] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.131151] x1 : 0000000000000000 x0 : fffffffffffffdfb [ 0.136649] Call trace: [ 0.139175] __clk_put+0xf0/0x120 [ 0.142605] timer_of_cleanup+0x60/0x7c [ 0.146572] mtk_gpt_init+0x18c/0x1a0 [ 0.150359] timer_probe+0x74/0x10c [ 0.153969] time_init+0x14/0x44 [ 0.157307] start_kernel+0x29c/0x414 [ 0.161098] ---[ end trace c3137b005300b618 ]---
Fixes: a0858f937960 ("clocksource/drivers/timer-mediatek: Convert the driver to timer-of") Fixes: e3af677607d9 ("clocksource/drivers/timer-mediatek: Add support for system timer") Signed-off-by: Matthias Brugger matthias.bgg@gmail.com --- drivers/clocksource/timer-mediatek.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c index eb10321f8517..d40c77a65b08 100644 --- a/drivers/clocksource/timer-mediatek.c +++ b/drivers/clocksource/timer-mediatek.c @@ -276,8 +276,12 @@ static int __init mtk_syst_init(struct device_node *node) to.of_irq.handler = mtk_syst_handler;
ret = timer_of_init(node, &to); - if (ret) + if (ret) { + if (ret == -EPROBE_DEFER) + return ret; + goto err; + }
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), TIMER_SYNC_TICKS, 0xffffffff); @@ -301,8 +305,12 @@ static int __init mtk_gpt_init(struct device_node *node) to.of_irq.handler = mtk_gpt_interrupt;
ret = timer_of_init(node, &to); - if (ret) + if (ret) { + if (ret == -EPROBE_DEFER) + return ret; + goto err; + }
/* Configure clock source */ mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
On Fri, 2018-11-23 at 18:07 +0100, Matthias Brugger wrote:
On 12/11/2018 02:28, Ryder Lee wrote:
The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
I suppose the root cause is, that the driver doesn't check the error timer_of_init returned.
Would you mind to test the following patch to see if this fixes the problem?
--->8 From be91e56ed527261137335af340845eb3dd3dd33a Mon Sep 17 00:00:00 2001 From: Matthias Brugger matthias.bgg@gmail.com Date: Fri, 23 Nov 2018 17:04:08 +0100 Subject: [PATCH] clocksource/drivers/timer-mediatek: error out on probe defer
If the clocks are not yet present, because they are loaded after the timer is initialized, we are unable to boot. Check if the return value of timer_of_init and return on EPROBE_DEFER.
Error seen is: [ 0.008337] Failed to get clock for /timer@10004000 [ 0.013435] WARNING: CPU: 0 PID: 0 at ../drivers/clk/clk.c:3615 __clk_put+0xf0/0x120 [ 0.021453] Modules linked in: [ 0.024614] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0-rc1-00063-g2859d9abd7e8 #2 [ 0.032902] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.038580] pstate: 20000085 (nzCv daIf -PAN -UAO) [ 0.043538] pc : __clk_put+0xf0/0x120 [ 0.047328] lr : clk_put+0xc/0x18 [ 0.050753] sp : ffff000009163ed0 [ 0.054178] x29: ffff000009163ed0 x28: 0000000041010018 [ 0.059676] x27: 0000000000000000 x26: 0000000000000000 [ 0.065174] x25: ffff0000090cb008 x24: ffff80001dfd7800 [ 0.070672] x23: ffff000008f934b8 x22: ffff80001dfdeae0 [ 0.076169] x21: ffff80001dfdeae0 x20: fffffffffffffdfb [ 0.081668] x19: ffff00000929ac40 x18: ffffffffffffffff [ 0.087166] x17: 0000000000000000 x16: 0000000000000000 [ 0.092664] x15: ffff0000091696c8 x14: ffff0000892cd70f [ 0.098162] x13: ffff0000092cd71d x12: ffff000009181348 [ 0.103661] x11: ffff000009181000 x10: 0000000005f5e0ff [ 0.109159] x9 : 0000000000000040 x8 : ffff000009181400 [ 0.114657] x7 : ffff80001c800270 x6 : 0000000000000000 [ 0.120155] x5 : ffff80001c800248 x4 : 0000000000000000 [ 0.125653] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.131151] x1 : 0000000000000000 x0 : fffffffffffffdfb [ 0.136649] Call trace: [ 0.139175] __clk_put+0xf0/0x120 [ 0.142605] timer_of_cleanup+0x60/0x7c [ 0.146572] mtk_gpt_init+0x18c/0x1a0 [ 0.150359] timer_probe+0x74/0x10c [ 0.153969] time_init+0x14/0x44 [ 0.157307] start_kernel+0x29c/0x414 [ 0.161098] ---[ end trace c3137b005300b618 ]---
Fixes: a0858f937960 ("clocksource/drivers/timer-mediatek: Convert the driver to timer-of") Fixes: e3af677607d9 ("clocksource/drivers/timer-mediatek: Add support for system timer") Signed-off-by: Matthias Brugger matthias.bgg@gmail.com
drivers/clocksource/timer-mediatek.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c index eb10321f8517..d40c77a65b08 100644 --- a/drivers/clocksource/timer-mediatek.c +++ b/drivers/clocksource/timer-mediatek.c @@ -276,8 +276,12 @@ static int __init mtk_syst_init(struct device_node *node) to.of_irq.handler = mtk_syst_handler;
ret = timer_of_init(node, &to);
- if (ret)
if (ret) {
if (ret == -EPROBE_DEFER)return ret;goto err;
}
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), TIMER_SYNC_TICKS, 0xffffffff);
@@ -301,8 +305,12 @@ static int __init mtk_gpt_init(struct device_node *node) to.of_irq.handler = mtk_gpt_interrupt;
ret = timer_of_init(node, &to);
- if (ret)
if (ret) {
if (ret == -EPROBE_DEFER)return ret;goto err;
}
/* Configure clock source */ mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
I tried this patch, but it didn't work. I think *_OF_DECLARE() is not compatible with EPROBE_DEFER.
I also found the similar discussion about this issue: https://patchwork.kernel.org/patch/10580345/
Ryder
On 26/11/2018 04:49, Ryder Lee wrote:
On Fri, 2018-11-23 at 18:07 +0100, Matthias Brugger wrote:
On 12/11/2018 02:28, Ryder Lee wrote:
The crash http://termbin.com/zitb is caused by the timer register into system in early pahse during kernel boot, but the clock sources didn't get ready at that time.
A better way is to switch to use CLK_OF_DECLARE() in driver for things that need them early, but this node is actually useless in MT7622. So we drop it.
I suppose the root cause is, that the driver doesn't check the error timer_of_init returned.
Would you mind to test the following patch to see if this fixes the problem?
--->8 From be91e56ed527261137335af340845eb3dd3dd33a Mon Sep 17 00:00:00 2001 From: Matthias Brugger matthias.bgg@gmail.com Date: Fri, 23 Nov 2018 17:04:08 +0100 Subject: [PATCH] clocksource/drivers/timer-mediatek: error out on probe defer
If the clocks are not yet present, because they are loaded after the timer is initialized, we are unable to boot. Check if the return value of timer_of_init and return on EPROBE_DEFER.
Error seen is: [ 0.008337] Failed to get clock for /timer@10004000 [ 0.013435] WARNING: CPU: 0 PID: 0 at ../drivers/clk/clk.c:3615 __clk_put+0xf0/0x120 [ 0.021453] Modules linked in: [ 0.024614] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0-rc1-00063-g2859d9abd7e8 #2 [ 0.032902] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.038580] pstate: 20000085 (nzCv daIf -PAN -UAO) [ 0.043538] pc : __clk_put+0xf0/0x120 [ 0.047328] lr : clk_put+0xc/0x18 [ 0.050753] sp : ffff000009163ed0 [ 0.054178] x29: ffff000009163ed0 x28: 0000000041010018 [ 0.059676] x27: 0000000000000000 x26: 0000000000000000 [ 0.065174] x25: ffff0000090cb008 x24: ffff80001dfd7800 [ 0.070672] x23: ffff000008f934b8 x22: ffff80001dfdeae0 [ 0.076169] x21: ffff80001dfdeae0 x20: fffffffffffffdfb [ 0.081668] x19: ffff00000929ac40 x18: ffffffffffffffff [ 0.087166] x17: 0000000000000000 x16: 0000000000000000 [ 0.092664] x15: ffff0000091696c8 x14: ffff0000892cd70f [ 0.098162] x13: ffff0000092cd71d x12: ffff000009181348 [ 0.103661] x11: ffff000009181000 x10: 0000000005f5e0ff [ 0.109159] x9 : 0000000000000040 x8 : ffff000009181400 [ 0.114657] x7 : ffff80001c800270 x6 : 0000000000000000 [ 0.120155] x5 : ffff80001c800248 x4 : 0000000000000000 [ 0.125653] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.131151] x1 : 0000000000000000 x0 : fffffffffffffdfb [ 0.136649] Call trace: [ 0.139175] __clk_put+0xf0/0x120 [ 0.142605] timer_of_cleanup+0x60/0x7c [ 0.146572] mtk_gpt_init+0x18c/0x1a0 [ 0.150359] timer_probe+0x74/0x10c [ 0.153969] time_init+0x14/0x44 [ 0.157307] start_kernel+0x29c/0x414 [ 0.161098] ---[ end trace c3137b005300b618 ]---
Fixes: a0858f937960 ("clocksource/drivers/timer-mediatek: Convert the driver to timer-of") Fixes: e3af677607d9 ("clocksource/drivers/timer-mediatek: Add support for system timer") Signed-off-by: Matthias Brugger matthias.bgg@gmail.com
drivers/clocksource/timer-mediatek.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c index eb10321f8517..d40c77a65b08 100644 --- a/drivers/clocksource/timer-mediatek.c +++ b/drivers/clocksource/timer-mediatek.c @@ -276,8 +276,12 @@ static int __init mtk_syst_init(struct device_node *node) to.of_irq.handler = mtk_syst_handler;
ret = timer_of_init(node, &to);
- if (ret)
if (ret) {
if (ret == -EPROBE_DEFER)return ret;goto err;
}
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), TIMER_SYNC_TICKS, 0xffffffff);
@@ -301,8 +305,12 @@ static int __init mtk_gpt_init(struct device_node *node) to.of_irq.handler = mtk_gpt_interrupt;
ret = timer_of_init(node, &to);
- if (ret)
if (ret) {
if (ret == -EPROBE_DEFER)return ret;goto err;
}
/* Configure clock source */ mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
I tried this patch, but it didn't work. I think *_OF_DECLARE() is not compatible with EPROBE_DEFER.
I also found the similar discussion about this issue: https://patchwork.kernel.org/patch/10580345/
Got it. So from my research we would need to use CLK_OF_DECLARE_DRIVER for: mainpll (pll)
syspll4_d16 (div)
f10m_ref_sel (mux)
infra_apxgpt_pd (gate)
Anyway, as a quick fix we can delete the device node. I'll reword you commit message and I'll also reword commit message for 1/3
In the future please try to not put links into the commit message but explain what is happening.
Regards, Matthias
linux-stable-mirror@lists.linaro.org
-
Matthias Brugger -
Ryder Lee -
Sasha Levin