From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 2a6852cb8ff0c8c1363cac648d68489343813212 ]

Due to some renaming, we ended up with the "indirect iomem" naming in Kconfig, following INDIRECT_PIO. However, clearly I missed following through on that in the ifdefs, but so far INDIRECT_IOMEM_FALLBACK isn't used by any architecture.

Reported-by: Lukas Bulwahn lukas.bulwahn@gmail.com Fixes: ca2e334232b6 ("lib: add iomem emulation (logic_iomem)") Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- lib/logic_iomem.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/lib/logic_iomem.c b/lib/logic_iomem.c index 549b22d4bcde..e7ea9b28d8db 100644 --- a/lib/logic_iomem.c +++ b/lib/logic_iomem.c @@ -68,7 +68,7 @@ int logic_iomem_add_region(struct resource *resource, } EXPORT_SYMBOL(logic_iomem_add_region);

-#ifndef CONFIG_LOGIC_IOMEM_FALLBACK +#ifndef CONFIG_INDIRECT_IOMEM_FALLBACK static void __iomem *real_ioremap(phys_addr_t offset, size_t size) { WARN(1, "invalid ioremap(0x%llx, 0x%zx)\n", @@ -81,7 +81,7 @@ static void real_iounmap(void __iomem *addr) WARN(1, "invalid iounmap for addr 0x%llx\n", (unsigned long long)(uintptr_t __force)addr); } -#endif /* CONFIG_LOGIC_IOMEM_FALLBACK */ +#endif /* CONFIG_INDIRECT_IOMEM_FALLBACK */

void __iomem *ioremap(phys_addr_t offset, size_t size) { @@ -168,7 +168,7 @@ void iounmap(void __iomem *addr) } EXPORT_SYMBOL(iounmap);

-#ifndef CONFIG_LOGIC_IOMEM_FALLBACK +#ifndef CONFIG_INDIRECT_IOMEM_FALLBACK #define MAKE_FALLBACK(op, sz) \ static u##sz real_raw_read ## op(const volatile void __iomem *addr) \ { \ @@ -213,7 +213,7 @@ static void real_memcpy_toio(volatile void __iomem *addr, const void *buffer, WARN(1, "Invalid memcpy_toio at address 0x%llx\n", (unsigned long long)(uintptr_t __force)addr); } -#endif /* CONFIG_LOGIC_IOMEM_FALLBACK */ +#endif /* CONFIG_INDIRECT_IOMEM_FALLBACK */

#define MAKE_OP(op, sz) \ u##sz __raw_read ## op(const volatile void __iomem *addr) \

From: Jiasheng Jiang jiasheng@iscas.ac.cn

[ Upstream commit 43f0269b6b89c1eec4ef83c48035608f4dcdd886 ]

As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, it need not free 'wm_rtc->rtc' since it will be freed automatically.

Fixes: 077eaf5b40ec ("rtc: rtc-wm8350: add support for WM8350 RTC") Signed-off-by: Jiasheng Jiang jiasheng@iscas.ac.cn Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Link: https://lore.kernel.org/r/20220303085030.291793-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-wm8350.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c index 2018614f258f..6eaa9321c074 100644 --- a/drivers/rtc/rtc-wm8350.c +++ b/drivers/rtc/rtc-wm8350.c @@ -432,14 +432,21 @@ static int wm8350_rtc_probe(struct platform_device *pdev) return ret; }

- wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + ret = wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, wm8350_rtc_update_handler, 0, "RTC Seconds", wm8350); + if (ret) + return ret; + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);

- wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + ret = wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, wm8350_rtc_alarm_handler, 0, "RTC Alarm", wm8350); + if (ret) { + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC, wm8350); + return ret; + }

return 0; }

From: Peter Gonda pgonda@google.com

[ Upstream commit 4a9e7b9ea252842bc8b14d495706ac6317fafd5d ]

Include kvm_cache_regs.h to pick up the definition of is_guest_mode(), which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove include from svm_onhpyerv.c which was done only because of lack of include in svm.h.

Fixes: 883b0a91f41ab ("KVM: SVM: Move Nested SVM Implementation to nested.c") Cc: Paolo Bonzini pbonzini@redhat.com Cc: Sean Christopherson seanjc@google.com Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda pgonda@google.com Message-Id: 20220304161032.2270688-1-pgonda@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/svm/svm.h | 2 ++ arch/x86/kvm/svm/svm_onhyperv.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h index 1b460e539926..01d35efaa646 100644 --- a/arch/x86/kvm/svm/svm.h +++ b/arch/x86/kvm/svm/svm.h @@ -22,6 +22,8 @@ #include <asm/svm.h> #include <asm/sev-common.h>

+#include "kvm_cache_regs.h" + #define __sme_page_pa(x) __sme_set(page_to_pfn(x) << PAGE_SHIFT)

#define IOPM_SIZE PAGE_SIZE * 3 diff --git a/arch/x86/kvm/svm/svm_onhyperv.c b/arch/x86/kvm/svm/svm_onhyperv.c index 98aa981c04ec..8cdc62c74a96 100644 --- a/arch/x86/kvm/svm/svm_onhyperv.c +++ b/arch/x86/kvm/svm/svm_onhyperv.c @@ -4,7 +4,6 @@ */

#include <linux/kvm_host.h> -#include "kvm_cache_regs.h"

#include <asm/mshyperv.h>

From: Like Xu likexu@tencent.com

[ Upstream commit e644896f5106aa3f6d7e8c7adf2e4dc0fce53555 ]

HSW_IN_TX* bits are used in generic code which are not supported on AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence using HSW_IN_TX* bits unconditionally in generic code is resulting in unintentional pmu behavior on AMD. For example, if EventSelect[11:8] is 0x2, pmc_reprogram_counter() wrongly assumes that HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.

Also per the SDM, both bits 32 and 33 "may only be set if the processor supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set for IA32_PERFEVTSEL2."

Opportunistically eliminate code redundancy, because if the HSW_IN_TX* bit is set in pmc->eventsel, it is already set in attr.config.

Reported-by: Ravi Bangoria ravi.bangoria@amd.com Reported-by: Jim Mattson jmattson@google.com Fixes: 103af0a98788 ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5") Co-developed-by: Ravi Bangoria ravi.bangoria@amd.com Signed-off-by: Ravi Bangoria ravi.bangoria@amd.com Signed-off-by: Like Xu likexu@tencent.com Message-Id: 20220309084257.88931-1-likexu@tencent.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/pmu.c | 15 +++++---------- arch/x86/kvm/vmx/pmu_intel.c | 13 ++++++++++--- 2 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index 255ef63a4354..227b06dd1fea 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -96,8 +96,7 @@ static void kvm_perf_overflow_intr(struct perf_event *perf_event,

static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type, u64 config, bool exclude_user, - bool exclude_kernel, bool intr, - bool in_tx, bool in_tx_cp) + bool exclude_kernel, bool intr) { struct perf_event *event; struct perf_event_attr attr = { @@ -113,16 +112,14 @@ static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type,

attr.sample_period = get_sample_period(pmc, pmc->counter);

- if (in_tx) - attr.config |= HSW_IN_TX; - if (in_tx_cp) { + if ((attr.config & HSW_IN_TX_CHECKPOINTED) && + guest_cpuid_is_intel(pmc->vcpu)) { /* * HSW_IN_TX_CHECKPOINTED is not supported with nonzero * period. Just clear the sample period so at least * allocating the counter doesn't fail. */ attr.sample_period = 0; - attr.config |= HSW_IN_TX_CHECKPOINTED; }

event = perf_event_create_kernel_counter(&attr, -1, current, @@ -229,9 +226,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel) pmc_reprogram_counter(pmc, type, config, !(eventsel & ARCH_PERFMON_EVENTSEL_USR), !(eventsel & ARCH_PERFMON_EVENTSEL_OS), - eventsel & ARCH_PERFMON_EVENTSEL_INT, - (eventsel & HSW_IN_TX), - (eventsel & HSW_IN_TX_CHECKPOINTED)); + eventsel & ARCH_PERFMON_EVENTSEL_INT); } EXPORT_SYMBOL_GPL(reprogram_gp_counter);

@@ -267,7 +262,7 @@ void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 ctrl, int idx) kvm_x86_ops.pmu_ops->find_fixed_event(idx), !(en_field & 0x2), /* exclude user */ !(en_field & 0x1), /* exclude kernel */ - pmi, false, false); + pmi); } EXPORT_SYMBOL_GPL(reprogram_fixed_counter);

diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c index 9e380a939c72..ee2452215e93 100644 --- a/arch/x86/kvm/vmx/pmu_intel.c +++ b/arch/x86/kvm/vmx/pmu_intel.c @@ -395,6 +395,7 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) struct kvm_pmc *pmc; u32 msr = msr_info->index; u64 data = msr_info->data; + u64 reserved_bits;

switch (msr) { case MSR_CORE_PERF_FIXED_CTR_CTRL: @@ -449,7 +450,11 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) } else if ((pmc = get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0))) { if (data == pmc->eventsel) return 0; - if (!(data & pmu->reserved_bits)) { + reserved_bits = pmu->reserved_bits; + if ((pmc->idx == 2) && + (pmu->raw_event_mask & HSW_IN_TX_CHECKPOINTED)) + reserved_bits ^= HSW_IN_TX_CHECKPOINTED; + if (!(data & reserved_bits)) { reprogram_gp_counter(pmc, data); return 0; } @@ -523,8 +528,10 @@ static void intel_pmu_refresh(struct kvm_vcpu *vcpu) entry = kvm_find_cpuid_entry(vcpu, 7, 0); if (entry && (boot_cpu_has(X86_FEATURE_HLE) || boot_cpu_has(X86_FEATURE_RTM)) && - (entry->ebx & (X86_FEATURE_HLE|X86_FEATURE_RTM))) - pmu->reserved_bits ^= HSW_IN_TX|HSW_IN_TX_CHECKPOINTED; + (entry->ebx & (X86_FEATURE_HLE|X86_FEATURE_RTM))) { + pmu->reserved_bits ^= HSW_IN_TX; + pmu->raw_event_mask |= (HSW_IN_TX|HSW_IN_TX_CHECKPOINTED); + }

bitmap_set(pmu->all_valid_pmc_idx, 0, pmu->nr_arch_gp_counters);

From: Anisse Astier anisse@astier.eu

[ Upstream commit 0b464ca3e0dd3cec65f28bc6d396d82f19080f69 ]

Panel is 800x1280, but mounted on a laptop form factor, sideways.

Signed-off-by: Anisse Astier anisse@astier.eu Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jani Nikula jani.nikula@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-3-anisse@... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index b910978d3e48..4e853acfd1e8 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -180,6 +180,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MicroPC"), }, .driver_data = (void *)&lcd720x1280_rightside_up, + }, { /* GPD Win Max */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "GPD"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "G1619-01"), + }, + .driver_data = (void *)&lcd800x1280_rightside_up, }, { /* * GPD Pocket, note that the the DMI data is less generic then * it seems, devices with a board-vendor of "AMI Corporation"

From: Dale Zhao dale.zhao@amd.com

[ Upstream commit 047db281c026de5971cedb5bb486aa29bd16a39d ]

[Why] For allow eDP hot-plug feature, the stream signal may change to VIRTUAL when plug-out and back to eDP when plug-in. OS will still setPathMode with same timing for each plugging, but eDP gets no stream update as we don't check signal type changing back as keeping it VIRTUAL. It's also unsafe for future cases that stream signal is switched with same timing.

[How] Check stream signal type change include previous HDMI signal case.

Reviewed-by: Aric Cyr Aric.Cyr@amd.com Acked-by: Wayne Lin wayne.lin@amd.com Signed-off-by: Dale Zhao dale.zhao@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 6b066ceab412..3aa2040d2475 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1640,6 +1640,9 @@ static bool are_stream_backends_same( if (is_timing_changed(stream_a, stream_b)) return false;

+ if (stream_a->signal != stream_b->signal) + return false; + if (stream_a->dpms_off != stream_b->dpms_off) return false;

From: Jani Nikula jani.nikula@intel.com

[ Upstream commit ce99534e978d4a36787dbe5e5c57749d12e6bf4a ]

Improve non-desktop quirk logging if the EDID indicates non-desktop. If both are set, note about redundant quirk. If there's no quirk but the EDID indicates non-desktop, don't log non-desktop is set to 0.

Cc: Philipp Zabel philipp.zabel@gmail.com Signed-off-by: Jani Nikula jani.nikula@intel.com Reviewed-by: Philipp Zabel philipp.zabel@gmail.com Tested-by: Philipp Zabel philipp.zabel@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20211228101051.317989-1-jani.n... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_edid.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a71b82668a98..83e5c115e754 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -5325,17 +5325,13 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi info->width_mm = edid->width_cm * 10; info->height_mm = edid->height_cm * 10;

- info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP); - drm_get_monitor_range(connector, edid);

- DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop); - if (edid->revision < 3) - return quirks; + goto out;

if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) - return quirks; + goto out;

info->color_formats |= DRM_COLOR_FORMAT_RGB444; drm_parse_cea_ext(connector, edid); @@ -5356,7 +5352,7 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi

/* Only defined for 1.4 with digital displays */ if (edid->revision < 4) - return quirks; + goto out;

switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) { case DRM_EDID_DIGITAL_DEPTH_6: @@ -5393,6 +5389,13 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi

drm_update_mso(connector, edid);

+out: + if (quirks & EDID_QUIRK_NON_DESKTOP) { + drm_dbg_kms(connector->dev, "Non-desktop display%s\n", + info->non_desktop ? " (redundant quirk)" : ""); + info->non_desktop = true; + } + return quirks; }

From: Yongzhi Liu lyz_cs@pku.edu.cn

[ Upstream commit 5d5c6dba2b43e28845d7d7ed32a36802329a5f52 ]

[why] Resource release is needed on the error handling path to prevent memory leak.

[how] Fix this by adding kfree on the error handling path.

Reviewed-by: Harry Wentland harry.wentland@amd.com Signed-off-by: Yongzhi Liu lyz_cs@pku.edu.cn Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 80 ++++++++++++++----- 1 file changed, 60 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c index f4e829ec8e10..ab58bcb11677 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c @@ -227,8 +227,10 @@ static ssize_t dp_link_settings_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -389,8 +391,10 @@ static ssize_t dp_phy_settings_read(struct file *f, char __user *buf, break;

r = put_user((*(rd_buf + result)), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -1317,8 +1321,10 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -1334,8 +1340,10 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -1504,8 +1512,10 @@ static ssize_t dp_dsc_slice_width_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -1521,8 +1531,10 @@ static ssize_t dp_dsc_slice_width_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -1689,8 +1701,10 @@ static ssize_t dp_dsc_slice_height_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -1706,8 +1720,10 @@ static ssize_t dp_dsc_slice_height_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -1870,8 +1886,10 @@ static ssize_t dp_dsc_bits_per_pixel_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -1887,8 +1905,10 @@ static ssize_t dp_dsc_bits_per_pixel_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -2046,8 +2066,10 @@ static ssize_t dp_dsc_pic_width_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -2063,8 +2085,10 @@ static ssize_t dp_dsc_pic_width_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -2103,8 +2127,10 @@ static ssize_t dp_dsc_pic_height_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -2120,8 +2146,10 @@ static ssize_t dp_dsc_pic_height_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -2175,8 +2203,10 @@ static ssize_t dp_dsc_chunk_size_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -2192,8 +2222,10 @@ static ssize_t dp_dsc_chunk_size_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -2247,8 +2279,10 @@ static ssize_t dp_dsc_slice_bpg_offset_read(struct file *f, char __user *buf, break; }

- if (!pipe_ctx) + if (!pipe_ctx) { + kfree(rd_buf); return -ENXIO; + }

dsc = pipe_ctx->stream_res.dsc; if (dsc) @@ -2264,8 +2298,10 @@ static ssize_t dp_dsc_slice_bpg_offset_read(struct file *f, char __user *buf, break;

r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + }

buf += 1; size -= 1; @@ -3255,8 +3291,10 @@ static ssize_t dcc_en_bits_read( dc->hwss.get_dcc_en_bits(dc, dcc_en_bits);

rd_buf = kcalloc(rd_buf_size, sizeof(char), GFP_KERNEL); - if (!rd_buf) + if (!rd_buf) { + kfree(dcc_en_bits); return -ENOMEM; + }

for (i = 0; i < num_pipes; i++) offset += snprintf(rd_buf + offset, rd_buf_size - offset, @@ -3269,8 +3307,10 @@ static ssize_t dcc_en_bits_read( if (*pos >= rd_buf_size) break; r = put_user(*(rd_buf + result), buf); - if (r) + if (r) { + kfree(rd_buf); return r; /* r = -EFAULT */ + } buf += 1; size -= 1; *pos += 1;

From: Wayne Chang waynec@nvidia.com

[ Upstream commit 62fb61580eb48fc890b7bc9fb5fd263367baeca8 ]

According to the Tegra Technical Reference Manual, SPARAM is a read-only register and should not be programmed in the driver.

The change removes the wrong SPARAM usage.

Signed-off-by: Wayne Chang waynec@nvidia.com Link: https://lore.kernel.org/r/20220107090443.149021-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/tegra-xudc.c | 8 -------- 1 file changed, 8 deletions(-)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index 43f1b0d461c1..716d9ab2d2ff 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -32,9 +32,6 @@ #include <linux/workqueue.h>

/* XUSB_DEV registers */ -#define SPARAM 0x000 -#define SPARAM_ERSTMAX_MASK GENMASK(20, 16) -#define SPARAM_ERSTMAX(x) (((x) << 16) & SPARAM_ERSTMAX_MASK) #define DB 0x004 #define DB_TARGET_MASK GENMASK(15, 8) #define DB_TARGET(x) (((x) << 8) & DB_TARGET_MASK) @@ -3295,11 +3292,6 @@ static void tegra_xudc_init_event_ring(struct tegra_xudc *xudc) unsigned int i; u32 val;

- val = xudc_readl(xudc, SPARAM); - val &= ~(SPARAM_ERSTMAX_MASK); - val |= SPARAM_ERSTMAX(XUDC_NR_EVENT_RINGS); - xudc_writel(xudc, val, SPARAM); - for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) { memset(xudc->event_ring[i], 0, XUDC_EVENT_RING_SIZE * sizeof(*xudc->event_ring[i]));

From: Pawel Laszczak pawell@cadence.com

[ Upstream commit 03db9289b5ab59437e42a111a34545a7cedb5190 ]

Variable ret in function cdnsp_decode_trb is initialized but not used. To fix this compiler warning patch adds checking whether the data buffer has not been overflowed.

Reported-by: kernel test robot lkp@intel.com Signed-off-by: Pawel Laszczak pawell@cadence.com Link: https://lore.kernel.org/r/20220112053237.14309-1-pawell@gli-login.cadence.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/cdnsp-debug.h | 305 ++++++++++++++++---------------- 1 file changed, 154 insertions(+), 151 deletions(-)

diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h index a8776df2d4e0..f0ca865cce2a 100644 --- a/drivers/usb/cdns3/cdnsp-debug.h +++ b/drivers/usb/cdns3/cdnsp-debug.h @@ -182,208 +182,211 @@ static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0, int ep_id = TRB_TO_EP_INDEX(field3) - 1; int type = TRB_FIELD_TO_TYPE(field3); unsigned int ep_num; - int ret = 0; + int ret; u32 temp;

ep_num = DIV_ROUND_UP(ep_id, 2);

switch (type) { case TRB_LINK: - ret += snprintf(str, size, - "LINK %08x%08x intr %ld type '%s' flags %c:%c:%c:%c", - field1, field0, GET_INTR_TARGET(field2), - cdnsp_trb_type_string(type), - field3 & TRB_IOC ? 'I' : 'i', - field3 & TRB_CHAIN ? 'C' : 'c', - field3 & TRB_TC ? 'T' : 't', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "LINK %08x%08x intr %ld type '%s' flags %c:%c:%c:%c", + field1, field0, GET_INTR_TARGET(field2), + cdnsp_trb_type_string(type), + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_TC ? 'T' : 't', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_TRANSFER: case TRB_COMPLETION: case TRB_PORT_STATUS: case TRB_HC_EVENT: - ret += snprintf(str, size, - "ep%d%s(%d) type '%s' TRB %08x%08x status '%s'" - " len %ld slot %ld flags %c:%c", - ep_num, ep_id % 2 ? "out" : "in", - TRB_TO_EP_INDEX(field3), - cdnsp_trb_type_string(type), field1, field0, - cdnsp_trb_comp_code_string(GET_COMP_CODE(field2)), - EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3), - field3 & EVENT_DATA ? 'E' : 'e', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "ep%d%s(%d) type '%s' TRB %08x%08x status '%s'" + " len %ld slot %ld flags %c:%c", + ep_num, ep_id % 2 ? "out" : "in", + TRB_TO_EP_INDEX(field3), + cdnsp_trb_type_string(type), field1, field0, + cdnsp_trb_comp_code_string(GET_COMP_CODE(field2)), + EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3), + field3 & EVENT_DATA ? 'E' : 'e', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_MFINDEX_WRAP: - ret += snprintf(str, size, "%s: flags %c", - cdnsp_trb_type_string(type), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, "%s: flags %c", + cdnsp_trb_type_string(type), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_SETUP: - ret += snprintf(str, size, - "type '%s' bRequestType %02x bRequest %02x " - "wValue %02x%02x wIndex %02x%02x wLength %d " - "length %ld TD size %ld intr %ld Setup ID %ld " - "flags %c:%c:%c", - cdnsp_trb_type_string(type), - field0 & 0xff, - (field0 & 0xff00) >> 8, - (field0 & 0xff000000) >> 24, - (field0 & 0xff0000) >> 16, - (field1 & 0xff00) >> 8, - field1 & 0xff, - (field1 & 0xff000000) >> 16 | - (field1 & 0xff0000) >> 16, - TRB_LEN(field2), GET_TD_SIZE(field2), - GET_INTR_TARGET(field2), - TRB_SETUPID_TO_TYPE(field3), - field3 & TRB_IDT ? 'D' : 'd', - field3 & TRB_IOC ? 'I' : 'i', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "type '%s' bRequestType %02x bRequest %02x " + "wValue %02x%02x wIndex %02x%02x wLength %d " + "length %ld TD size %ld intr %ld Setup ID %ld " + "flags %c:%c:%c", + cdnsp_trb_type_string(type), + field0 & 0xff, + (field0 & 0xff00) >> 8, + (field0 & 0xff000000) >> 24, + (field0 & 0xff0000) >> 16, + (field1 & 0xff00) >> 8, + field1 & 0xff, + (field1 & 0xff000000) >> 16 | + (field1 & 0xff0000) >> 16, + TRB_LEN(field2), GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + TRB_SETUPID_TO_TYPE(field3), + field3 & TRB_IDT ? 'D' : 'd', + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_DATA: - ret += snprintf(str, size, - "type '%s' Buffer %08x%08x length %ld TD size %ld " - "intr %ld flags %c:%c:%c:%c:%c:%c:%c", - cdnsp_trb_type_string(type), - field1, field0, TRB_LEN(field2), - GET_TD_SIZE(field2), - GET_INTR_TARGET(field2), - field3 & TRB_IDT ? 'D' : 'i', - field3 & TRB_IOC ? 'I' : 'i', - field3 & TRB_CHAIN ? 'C' : 'c', - field3 & TRB_NO_SNOOP ? 'S' : 's', - field3 & TRB_ISP ? 'I' : 'i', - field3 & TRB_ENT ? 'E' : 'e', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "type '%s' Buffer %08x%08x length %ld TD size %ld " + "intr %ld flags %c:%c:%c:%c:%c:%c:%c", + cdnsp_trb_type_string(type), + field1, field0, TRB_LEN(field2), + GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + field3 & TRB_IDT ? 'D' : 'i', + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_NO_SNOOP ? 'S' : 's', + field3 & TRB_ISP ? 'I' : 'i', + field3 & TRB_ENT ? 'E' : 'e', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_STATUS: - ret += snprintf(str, size, - "Buffer %08x%08x length %ld TD size %ld intr" - "%ld type '%s' flags %c:%c:%c:%c", - field1, field0, TRB_LEN(field2), - GET_TD_SIZE(field2), - GET_INTR_TARGET(field2), - cdnsp_trb_type_string(type), - field3 & TRB_IOC ? 'I' : 'i', - field3 & TRB_CHAIN ? 'C' : 'c', - field3 & TRB_ENT ? 'E' : 'e', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "Buffer %08x%08x length %ld TD size %ld intr" + "%ld type '%s' flags %c:%c:%c:%c", + field1, field0, TRB_LEN(field2), + GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + cdnsp_trb_type_string(type), + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_ENT ? 'E' : 'e', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_NORMAL: case TRB_ISOC: case TRB_EVENT_DATA: case TRB_TR_NOOP: - ret += snprintf(str, size, - "type '%s' Buffer %08x%08x length %ld " - "TD size %ld intr %ld " - "flags %c:%c:%c:%c:%c:%c:%c:%c:%c", - cdnsp_trb_type_string(type), - field1, field0, TRB_LEN(field2), - GET_TD_SIZE(field2), - GET_INTR_TARGET(field2), - field3 & TRB_BEI ? 'B' : 'b', - field3 & TRB_IDT ? 'T' : 't', - field3 & TRB_IOC ? 'I' : 'i', - field3 & TRB_CHAIN ? 'C' : 'c', - field3 & TRB_NO_SNOOP ? 'S' : 's', - field3 & TRB_ISP ? 'I' : 'i', - field3 & TRB_ENT ? 'E' : 'e', - field3 & TRB_CYCLE ? 'C' : 'c', - !(field3 & TRB_EVENT_INVALIDATE) ? 'V' : 'v'); + ret = snprintf(str, size, + "type '%s' Buffer %08x%08x length %ld " + "TD size %ld intr %ld " + "flags %c:%c:%c:%c:%c:%c:%c:%c:%c", + cdnsp_trb_type_string(type), + field1, field0, TRB_LEN(field2), + GET_TD_SIZE(field2), + GET_INTR_TARGET(field2), + field3 & TRB_BEI ? 'B' : 'b', + field3 & TRB_IDT ? 'T' : 't', + field3 & TRB_IOC ? 'I' : 'i', + field3 & TRB_CHAIN ? 'C' : 'c', + field3 & TRB_NO_SNOOP ? 'S' : 's', + field3 & TRB_ISP ? 'I' : 'i', + field3 & TRB_ENT ? 'E' : 'e', + field3 & TRB_CYCLE ? 'C' : 'c', + !(field3 & TRB_EVENT_INVALIDATE) ? 'V' : 'v'); break; case TRB_CMD_NOOP: case TRB_ENABLE_SLOT: - ret += snprintf(str, size, "%s: flags %c", - cdnsp_trb_type_string(type), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, "%s: flags %c", + cdnsp_trb_type_string(type), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_DISABLE_SLOT: - ret += snprintf(str, size, "%s: slot %ld flags %c", - cdnsp_trb_type_string(type), - TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, "%s: slot %ld flags %c", + cdnsp_trb_type_string(type), + TRB_TO_SLOT_ID(field3), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_ADDR_DEV: - ret += snprintf(str, size, - "%s: ctx %08x%08x slot %ld flags %c:%c", - cdnsp_trb_type_string(type), field1, field0, - TRB_TO_SLOT_ID(field3), - field3 & TRB_BSR ? 'B' : 'b', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "%s: ctx %08x%08x slot %ld flags %c:%c", + cdnsp_trb_type_string(type), field1, field0, + TRB_TO_SLOT_ID(field3), + field3 & TRB_BSR ? 'B' : 'b', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_CONFIG_EP: - ret += snprintf(str, size, - "%s: ctx %08x%08x slot %ld flags %c:%c", - cdnsp_trb_type_string(type), field1, field0, - TRB_TO_SLOT_ID(field3), - field3 & TRB_DC ? 'D' : 'd', - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "%s: ctx %08x%08x slot %ld flags %c:%c", + cdnsp_trb_type_string(type), field1, field0, + TRB_TO_SLOT_ID(field3), + field3 & TRB_DC ? 'D' : 'd', + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_EVAL_CONTEXT: - ret += snprintf(str, size, - "%s: ctx %08x%08x slot %ld flags %c", - cdnsp_trb_type_string(type), field1, field0, - TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "%s: ctx %08x%08x slot %ld flags %c", + cdnsp_trb_type_string(type), field1, field0, + TRB_TO_SLOT_ID(field3), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_RESET_EP: case TRB_HALT_ENDPOINT: case TRB_FLUSH_ENDPOINT: - ret += snprintf(str, size, - "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c", - cdnsp_trb_type_string(type), - ep_num, ep_id % 2 ? "out" : "in", - TRB_TO_EP_INDEX(field3), field1, field0, - TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c", + cdnsp_trb_type_string(type), + ep_num, ep_id % 2 ? "out" : "in", + TRB_TO_EP_INDEX(field3), field1, field0, + TRB_TO_SLOT_ID(field3), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_STOP_RING: - ret += snprintf(str, size, - "%s: ep%d%s(%d) slot %ld sp %d flags %c", - cdnsp_trb_type_string(type), - ep_num, ep_id % 2 ? "out" : "in", - TRB_TO_EP_INDEX(field3), - TRB_TO_SLOT_ID(field3), - TRB_TO_SUSPEND_PORT(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "%s: ep%d%s(%d) slot %ld sp %d flags %c", + cdnsp_trb_type_string(type), + ep_num, ep_id % 2 ? "out" : "in", + TRB_TO_EP_INDEX(field3), + TRB_TO_SLOT_ID(field3), + TRB_TO_SUSPEND_PORT(field3), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_SET_DEQ: - ret += snprintf(str, size, - "%s: ep%d%s(%d) deq %08x%08x stream %ld slot %ld flags %c", - cdnsp_trb_type_string(type), - ep_num, ep_id % 2 ? "out" : "in", - TRB_TO_EP_INDEX(field3), field1, field0, - TRB_TO_STREAM_ID(field2), - TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, + "%s: ep%d%s(%d) deq %08x%08x stream %ld slot %ld flags %c", + cdnsp_trb_type_string(type), + ep_num, ep_id % 2 ? "out" : "in", + TRB_TO_EP_INDEX(field3), field1, field0, + TRB_TO_STREAM_ID(field2), + TRB_TO_SLOT_ID(field3), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_RESET_DEV: - ret += snprintf(str, size, "%s: slot %ld flags %c", - cdnsp_trb_type_string(type), - TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + ret = snprintf(str, size, "%s: slot %ld flags %c", + cdnsp_trb_type_string(type), + TRB_TO_SLOT_ID(field3), + field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_ENDPOINT_NRDY: - temp = TRB_TO_HOST_STREAM(field2); - - ret += snprintf(str, size, - "%s: ep%d%s(%d) H_SID %x%s%s D_SID %lx flags %c:%c", - cdnsp_trb_type_string(type), - ep_num, ep_id % 2 ? "out" : "in", - TRB_TO_EP_INDEX(field3), temp, - temp == STREAM_PRIME_ACK ? "(PRIME)" : "", - temp == STREAM_REJECTED ? "(REJECTED)" : "", - TRB_TO_DEV_STREAM(field0), - field3 & TRB_STAT ? 'S' : 's', - field3 & TRB_CYCLE ? 'C' : 'c'); + temp = TRB_TO_HOST_STREAM(field2); + + ret = snprintf(str, size, + "%s: ep%d%s(%d) H_SID %x%s%s D_SID %lx flags %c:%c", + cdnsp_trb_type_string(type), + ep_num, ep_id % 2 ? "out" : "in", + TRB_TO_EP_INDEX(field3), temp, + temp == STREAM_PRIME_ACK ? "(PRIME)" : "", + temp == STREAM_REJECTED ? "(REJECTED)" : "", + TRB_TO_DEV_STREAM(field0), + field3 & TRB_STAT ? 'S' : 's', + field3 & TRB_CYCLE ? 'C' : 'c'); break; default: - ret += snprintf(str, size, - "type '%s' -> raw %08x %08x %08x %08x", - cdnsp_trb_type_string(type), - field0, field1, field2, field3); + ret = snprintf(str, size, + "type '%s' -> raw %08x %08x %08x %08x", + cdnsp_trb_type_string(type), + field0, field1, field2, field3); }

+ if (ret >= size) + pr_info("CDNSP: buffer overflowed.\n"); + return str; }

From: Magnus Karlsson magnus.karlsson@intel.com

[ Upstream commit 3b22523bca02b0d5618c08b93d8fd1fb578e1cc3 ]

After commit 710ad98c363a ("veth: Do not record rx queue hint in veth_xmit"), veth no longer receives traffic on the same queue as it was sent on. This breaks the bpf_res test for the AF_XDP selftests as the socket tied to queue 1 will not receive traffic anymore.

Modify the test so that two sockets are tied to queue id 0 using a shared umem instead. When killing the first socket enter the second socket into the xskmap so that traffic will flow to it. This will still test that the resources are not cleaned up until after the second socket dies, without having to rely on veth supporting rx_queue hints.

Reported-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Signed-off-by: Magnus Karlsson magnus.karlsson@intel.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Reviewed-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Acked-by: John Fastabend john.fastabend@gmail.com Link: https://lore.kernel.org/bpf/20220125082945.26179-1-magnus.karlsson@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/xdpxceiver.c | 80 +++++++++++++++--------- tools/testing/selftests/bpf/xdpxceiver.h | 2 +- 2 files changed, 50 insertions(+), 32 deletions(-)

diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c index 37d4873d9a2e..e475d0327c81 100644 --- a/tools/testing/selftests/bpf/xdpxceiver.c +++ b/tools/testing/selftests/bpf/xdpxceiver.c @@ -260,22 +260,24 @@ static int xsk_configure_umem(struct xsk_umem_info *umem, void *buffer, u64 size }

static int xsk_configure_socket(struct xsk_socket_info *xsk, struct xsk_umem_info *umem, - struct ifobject *ifobject, u32 qid) + struct ifobject *ifobject, bool shared) { - struct xsk_socket_config cfg; + struct xsk_socket_config cfg = {}; struct xsk_ring_cons *rxr; struct xsk_ring_prod *txr;

xsk->umem = umem; cfg.rx_size = xsk->rxqsize; cfg.tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS; - cfg.libbpf_flags = 0; + cfg.libbpf_flags = XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD; cfg.xdp_flags = ifobject->xdp_flags; cfg.bind_flags = ifobject->bind_flags; + if (shared) + cfg.bind_flags |= XDP_SHARED_UMEM;

txr = ifobject->tx_on ? &xsk->tx : NULL; rxr = ifobject->rx_on ? &xsk->rx : NULL; - return xsk_socket__create(&xsk->xsk, ifobject->ifname, qid, umem->umem, rxr, txr, &cfg); + return xsk_socket__create(&xsk->xsk, ifobject->ifname, 0, umem->umem, rxr, txr, &cfg); }

static struct option long_options[] = { @@ -381,7 +383,6 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx, for (i = 0; i < MAX_INTERFACES; i++) { struct ifobject *ifobj = i ? ifobj_rx : ifobj_tx;

- ifobj->umem = &ifobj->umem_arr[0]; ifobj->xsk = &ifobj->xsk_arr[0]; ifobj->use_poll = false; ifobj->pacing_on = true; @@ -395,11 +396,12 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx, ifobj->tx_on = false; }

+ memset(ifobj->umem, 0, sizeof(*ifobj->umem)); + ifobj->umem->num_frames = DEFAULT_UMEM_BUFFERS; + ifobj->umem->frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE; + for (j = 0; j < MAX_SOCKETS; j++) { - memset(&ifobj->umem_arr[j], 0, sizeof(ifobj->umem_arr[j])); memset(&ifobj->xsk_arr[j], 0, sizeof(ifobj->xsk_arr[j])); - ifobj->umem_arr[j].num_frames = DEFAULT_UMEM_BUFFERS; - ifobj->umem_arr[j].frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE; ifobj->xsk_arr[j].rxqsize = XSK_RING_CONS__DEFAULT_NUM_DESCS; } } @@ -946,7 +948,10 @@ static void tx_stats_validate(struct ifobject *ifobject)

static void thread_common_ops(struct test_spec *test, struct ifobject *ifobject) { + u64 umem_sz = ifobject->umem->num_frames * ifobject->umem->frame_size; int mmap_flags = MAP_PRIVATE | MAP_ANONYMOUS | MAP_NORESERVE; + int ret, ifindex; + void *bufs; u32 i;

ifobject->ns_fd = switch_namespace(ifobject->nsname); @@ -954,23 +959,20 @@ static void thread_common_ops(struct test_spec *test, struct ifobject *ifobject) if (ifobject->umem->unaligned_mode) mmap_flags |= MAP_HUGETLB;

- for (i = 0; i < test->nb_sockets; i++) { - u64 umem_sz = ifobject->umem->num_frames * ifobject->umem->frame_size; - u32 ctr = 0; - void *bufs; - int ret; + bufs = mmap(NULL, umem_sz, PROT_READ | PROT_WRITE, mmap_flags, -1, 0); + if (bufs == MAP_FAILED) + exit_with_error(errno);

- bufs = mmap(NULL, umem_sz, PROT_READ | PROT_WRITE, mmap_flags, -1, 0); - if (bufs == MAP_FAILED) - exit_with_error(errno); + ret = xsk_configure_umem(ifobject->umem, bufs, umem_sz); + if (ret) + exit_with_error(-ret);

- ret = xsk_configure_umem(&ifobject->umem_arr[i], bufs, umem_sz); - if (ret) - exit_with_error(-ret); + for (i = 0; i < test->nb_sockets; i++) { + u32 ctr = 0;

while (ctr++ < SOCK_RECONF_CTR) { - ret = xsk_configure_socket(&ifobject->xsk_arr[i], &ifobject->umem_arr[i], - ifobject, i); + ret = xsk_configure_socket(&ifobject->xsk_arr[i], ifobject->umem, + ifobject, !!i); if (!ret) break;

@@ -981,8 +983,22 @@ static void thread_common_ops(struct test_spec *test, struct ifobject *ifobject) } }

- ifobject->umem = &ifobject->umem_arr[0]; ifobject->xsk = &ifobject->xsk_arr[0]; + + if (!ifobject->rx_on) + return; + + ifindex = if_nametoindex(ifobject->ifname); + if (!ifindex) + exit_with_error(errno); + + ret = xsk_setup_xdp_prog(ifindex, &ifobject->xsk_map_fd); + if (ret) + exit_with_error(-ret); + + ret = xsk_socket__update_xskmap(ifobject->xsk->xsk, ifobject->xsk_map_fd); + if (ret) + exit_with_error(-ret); }

static void testapp_cleanup_xsk_res(struct ifobject *ifobj) @@ -1138,14 +1154,16 @@ static void testapp_bidi(struct test_spec *test)

static void swap_xsk_resources(struct ifobject *ifobj_tx, struct ifobject *ifobj_rx) { + int ret; + xsk_socket__delete(ifobj_tx->xsk->xsk); - xsk_umem__delete(ifobj_tx->umem->umem); xsk_socket__delete(ifobj_rx->xsk->xsk); - xsk_umem__delete(ifobj_rx->umem->umem); - ifobj_tx->umem = &ifobj_tx->umem_arr[1]; ifobj_tx->xsk = &ifobj_tx->xsk_arr[1]; - ifobj_rx->umem = &ifobj_rx->umem_arr[1]; ifobj_rx->xsk = &ifobj_rx->xsk_arr[1]; + + ret = xsk_socket__update_xskmap(ifobj_rx->xsk->xsk, ifobj_rx->xsk_map_fd); + if (ret) + exit_with_error(-ret); }

static void testapp_bpf_res(struct test_spec *test) @@ -1404,13 +1422,13 @@ static struct ifobject *ifobject_create(void) if (!ifobj->xsk_arr) goto out_xsk_arr;

- ifobj->umem_arr = calloc(MAX_SOCKETS, sizeof(*ifobj->umem_arr)); - if (!ifobj->umem_arr) - goto out_umem_arr; + ifobj->umem = calloc(1, sizeof(*ifobj->umem)); + if (!ifobj->umem) + goto out_umem;

return ifobj;

-out_umem_arr: +out_umem: free(ifobj->xsk_arr); out_xsk_arr: free(ifobj); @@ -1419,7 +1437,7 @@ static struct ifobject *ifobject_create(void)

static void ifobject_delete(struct ifobject *ifobj) { - free(ifobj->umem_arr); + free(ifobj->umem); free(ifobj->xsk_arr); free(ifobj); } diff --git a/tools/testing/selftests/bpf/xdpxceiver.h b/tools/testing/selftests/bpf/xdpxceiver.h index 2f705f44b748..62a3e6388632 100644 --- a/tools/testing/selftests/bpf/xdpxceiver.h +++ b/tools/testing/selftests/bpf/xdpxceiver.h @@ -125,10 +125,10 @@ struct ifobject { struct xsk_socket_info *xsk; struct xsk_socket_info *xsk_arr; struct xsk_umem_info *umem; - struct xsk_umem_info *umem_arr; thread_func_t func_ptr; struct pkt_stream *pkt_stream; int ns_fd; + int xsk_map_fd; u32 dst_ip; u32 src_ip; u32 xdp_flags;

From: Philip Yang Philip.Yang@amd.com

[ Upstream commit 367c9b0f1b8750a704070e7ae85234d591290434 ]

svm_deferred_list work should continue to handle deferred_range_list which maybe split to child range to avoid child range leak, and remove ranges mmu interval notifier to avoid mm mm_count leak. So taking mm reference when adding range to deferred list, to ensure mm is valid in the scheduled deferred_list_work, and drop the mm referrence after range is handled.

Signed-off-by: Philip Yang Philip.Yang@amd.com Reported-by: Ruili Ji ruili.ji@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 62 ++++++++++++++++------------ 1 file changed, 36 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index c0b8f4ff80b8..ea1c5aaf659a 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -1926,10 +1926,9 @@ svm_range_update_notifier_and_interval_tree(struct mm_struct *mm, }

static void -svm_range_handle_list_op(struct svm_range_list *svms, struct svm_range *prange) +svm_range_handle_list_op(struct svm_range_list *svms, struct svm_range *prange, + struct mm_struct *mm) { - struct mm_struct *mm = prange->work_item.mm; - switch (prange->work_item.op) { case SVM_OP_NULL: pr_debug("NULL OP 0x%p prange 0x%p [0x%lx 0x%lx]\n", @@ -2013,34 +2012,41 @@ static void svm_range_deferred_list_work(struct work_struct *work) pr_debug("enter svms 0x%p\n", svms);

p = container_of(svms, struct kfd_process, svms); - /* Avoid mm is gone when inserting mmu notifier */ - mm = get_task_mm(p->lead_thread); - if (!mm) { - pr_debug("svms 0x%p process mm gone\n", svms); - return; - } -retry: - mmap_write_lock(mm); - - /* Checking for the need to drain retry faults must be inside - * mmap write lock to serialize with munmap notifiers. - */ - if (unlikely(atomic_read(&svms->drain_pagefaults))) { - mmap_write_unlock(mm); - svm_range_drain_retry_fault(svms); - goto retry; - }

spin_lock(&svms->deferred_list_lock); while (!list_empty(&svms->deferred_range_list)) { prange = list_first_entry(&svms->deferred_range_list, struct svm_range, deferred_list); - list_del_init(&prange->deferred_list); spin_unlock(&svms->deferred_list_lock);

pr_debug("prange 0x%p [0x%lx 0x%lx] op %d\n", prange, prange->start, prange->last, prange->work_item.op);

+ mm = prange->work_item.mm; +retry: + mmap_write_lock(mm); + + /* Checking for the need to drain retry faults must be inside + * mmap write lock to serialize with munmap notifiers. + */ + if (unlikely(atomic_read(&svms->drain_pagefaults))) { + mmap_write_unlock(mm); + svm_range_drain_retry_fault(svms); + goto retry; + } + + /* Remove from deferred_list must be inside mmap write lock, for + * two race cases: + * 1. unmap_from_cpu may change work_item.op and add the range + * to deferred_list again, cause use after free bug. + * 2. svm_range_list_lock_and_flush_work may hold mmap write + * lock and continue because deferred_list is empty, but + * deferred_list work is actually waiting for mmap lock. + */ + spin_lock(&svms->deferred_list_lock); + list_del_init(&prange->deferred_list); + spin_unlock(&svms->deferred_list_lock); + mutex_lock(&svms->lock); mutex_lock(&prange->migrate_mutex); while (!list_empty(&prange->child_list)) { @@ -2051,19 +2057,20 @@ static void svm_range_deferred_list_work(struct work_struct *work) pr_debug("child prange 0x%p op %d\n", pchild, pchild->work_item.op); list_del_init(&pchild->child_list); - svm_range_handle_list_op(svms, pchild); + svm_range_handle_list_op(svms, pchild, mm); } mutex_unlock(&prange->migrate_mutex);

- svm_range_handle_list_op(svms, prange); + svm_range_handle_list_op(svms, prange, mm); mutex_unlock(&svms->lock); + mmap_write_unlock(mm); + + /* Pairs with mmget in svm_range_add_list_work */ + mmput(mm);

spin_lock(&svms->deferred_list_lock); } spin_unlock(&svms->deferred_list_lock); - - mmap_write_unlock(mm); - mmput(mm); pr_debug("exit svms 0x%p\n", svms); }

@@ -2081,6 +2088,9 @@ svm_range_add_list_work(struct svm_range_list *svms, struct svm_range *prange, prange->work_item.op = op; } else { prange->work_item.op = op; + + /* Pairs with mmput in deferred_list_work */ + mmget(mm); prange->work_item.mm = mm; list_add_tail(&prange->deferred_list, &prange->svms->deferred_range_list);

From: Maxim Kiselev bigunclemax@gmail.com

[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]

T1040RDB has two RTL8211E-VB phys which requires setting of internal delays for correct work.

Changing the phy-connection-type property to `rgmii-id` will fix this issue.

Signed-off-by: Maxim Kiselev bigunclemax@gmail.com Reviewed-by: Maxim Kochetkov fido_max@inbox.ru Reviewed-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi index 099a598c74c0..bfe1ed5be337 100644 --- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi @@ -139,12 +139,12 @@ fman@400000 { ethernet@e6000 { phy-handle = <&phy_rgmii_0>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; };

ethernet@e8000 { phy-handle = <&phy_rgmii_1>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; };

mdio0: mdio@fc000 {

From: Kalle Valo quic_kvalo@quicinc.com

[ Upstream commit b4f4c56459a5c744f7f066b9fc2b54ea995030c5 ]

Mario reported that the kernel was crashing on suspend if ath11k was not able to find a board file:

[ 473.693286] PM: Suspending system (s2idle) [ 473.693291] printk: Suspending console(s) (use no_console_suspend to debug) [ 474.407787] BUG: unable to handle page fault for address: 0000000000002070 [ 474.407791] #PF: supervisor read access in kernel mode [ 474.407794] #PF: error_code(0x0000) - not-present page [ 474.407798] PGD 0 P4D 0 [ 474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G W 5.16.0 #248 [...] [ 474.407868] Call Trace: [ 474.407870] <TASK> [ 474.407874] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 474.407882] ? lock_timer_base+0x72/0xa0 [ 474.407889] ? _raw_spin_unlock_irqrestore+0x29/0x3d [ 474.407892] ? try_to_del_timer_sync+0x54/0x80 [ 474.407896] ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k] [ 474.407912] ath11k_core_suspend+0x34/0x130 [ath11k] [ 474.407923] ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci] [ 474.407928] pci_pm_suspend+0x7e/0x170 [ 474.407935] ? pci_pm_freeze+0xc0/0xc0 [ 474.407939] dpm_run_callback+0x4e/0x150 [ 474.407947] __device_suspend+0x148/0x4c0 [ 474.407951] async_suspend+0x20/0x90 dmesg-efi-164255130401001: Oops#1 Part1 [ 474.407955] async_run_entry_fn+0x33/0x120 [ 474.407959] process_one_work+0x220/0x3f0 [ 474.407966] worker_thread+0x4a/0x3d0 [ 474.407971] kthread+0x17a/0x1a0 [ 474.407975] ? process_one_work+0x3f0/0x3f0 [ 474.407979] ? set_kthread_struct+0x40/0x40 [ 474.407983] ret_from_fork+0x22/0x30 [ 474.407991] </TASK>

The issue here is that board file loading happens after ath11k_pci_probe() succesfully returns (ath11k initialisation happends asynchronously) and the suspend handler is still enabled, of course failing as ath11k is not properly initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and resume.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Reported-by: Mario Limonciello mario.limonciello@amd.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215504 Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220127090117.2024-1-kvalo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index 4c348bacf2cb..754578f3dcf1 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -1419,6 +1419,11 @@ static __maybe_unused int ath11k_pci_pm_suspend(struct device *dev) struct ath11k_base *ab = dev_get_drvdata(dev); int ret;

+ if (test_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags)) { + ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot skipping pci suspend as qmi is not initialised\n"); + return 0; + } + ret = ath11k_core_suspend(ab); if (ret) ath11k_warn(ab, "failed to suspend core: %d\n", ret); @@ -1431,6 +1436,11 @@ static __maybe_unused int ath11k_pci_pm_resume(struct device *dev) struct ath11k_base *ab = dev_get_drvdata(dev); int ret;

+ if (test_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags)) { + ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot skipping pci resume as qmi is not initialised\n"); + return 0; + } + ret = ath11k_core_resume(ab); if (ret) ath11k_warn(ab, "failed to resume core: %d\n", ret);

From: Tony Lu tonylu@linux.alibaba.com

[ Upstream commit ea785a1a573b390a150010b3c5b81e1ccd8c98a8 ]

According to the man page of TCP_CORK [1], if set, don't send out partial frames. All queued partial frames are sent when option is cleared again.

When applications call setsockopt to disable TCP_CORK, this call is protected by lock_sock(), and tries to mod_delayed_work() to 0, in order to send pending data right now. However, the delayed work smc_tx_work is also protected by lock_sock(). There introduces lock contention for sending data.

To fix it, send pending data directly which acts like TCP, without lock_sock() protected in the context of setsockopt (already lock_sock()ed), and cancel unnecessary dealyed work, which is protected by lock.

[1] https://linux.die.net/man/7/tcp

Signed-off-by: Tony Lu tonylu@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/af_smc.c | 4 ++-- net/smc/smc_tx.c | 25 +++++++++++++++---------- net/smc/smc_tx.h | 1 + 3 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index a0fb596459a3..0ec721b8059a 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -2632,8 +2632,8 @@ static int smc_setsockopt(struct socket *sock, int level, int optname, sk->sk_state != SMC_CLOSED) { if (!val) { SMC_STAT_INC(smc, cork_cnt); - mod_delayed_work(smc->conn.lgr->tx_wq, - &smc->conn.tx_work, 0); + smc_tx_pending(&smc->conn); + cancel_delayed_work(&smc->conn.tx_work); } } break; diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c index be241d53020f..7b0b6e24582f 100644 --- a/net/smc/smc_tx.c +++ b/net/smc/smc_tx.c @@ -597,27 +597,32 @@ int smc_tx_sndbuf_nonempty(struct smc_connection *conn) return rc; }

-/* Wakeup sndbuf consumers from process context - * since there is more data to transmit - */ -void smc_tx_work(struct work_struct *work) +void smc_tx_pending(struct smc_connection *conn) { - struct smc_connection *conn = container_of(to_delayed_work(work), - struct smc_connection, - tx_work); struct smc_sock *smc = container_of(conn, struct smc_sock, conn); int rc;

- lock_sock(&smc->sk); if (smc->sk.sk_err) - goto out; + return;

rc = smc_tx_sndbuf_nonempty(conn); if (!rc && conn->local_rx_ctrl.prod_flags.write_blocked && !atomic_read(&conn->bytes_to_rcv)) conn->local_rx_ctrl.prod_flags.write_blocked = 0; +} + +/* Wakeup sndbuf consumers from process context + * since there is more data to transmit + */ +void smc_tx_work(struct work_struct *work) +{ + struct smc_connection *conn = container_of(to_delayed_work(work), + struct smc_connection, + tx_work); + struct smc_sock *smc = container_of(conn, struct smc_sock, conn);

-out: + lock_sock(&smc->sk); + smc_tx_pending(conn); release_sock(&smc->sk); }

diff --git a/net/smc/smc_tx.h b/net/smc/smc_tx.h index 07e6ad76224a..a59f370b8b43 100644 --- a/net/smc/smc_tx.h +++ b/net/smc/smc_tx.h @@ -27,6 +27,7 @@ static inline int smc_tx_prepared_sends(struct smc_connection *conn) return smc_curs_diff(conn->sndbuf_desc->len, &sent, &prep); }

+void smc_tx_pending(struct smc_connection *conn); void smc_tx_work(struct work_struct *work); void smc_tx_init(struct smc_sock *smc); int smc_tx_sendmsg(struct smc_sock *smc, struct msghdr *msg, size_t len);

From: Jakub Sitnicki jakub@cloudflare.com

[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ]

Menglong Dong reports that the documentation for the dst_port field in struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the field is a zero-padded 16-bit integer in network byte order. The value appears to the BPF user as if laid out in memory as so:

offsetof(struct bpf_sock, dst_port) + 0 <port MSB> + 8 <port LSB> +16 0x00 +24 0x00

32-, 16-, and 8-bit wide loads from the field are all allowed, but only if the offset into the field is 0.

32-bit wide loads from dst_port are especially confusing. The loaded value, after converting to host byte order with bpf_ntohl(dst_port), contains the port number in the upper 16-bits.

Remove the confusion by splitting the field into two 16-bit fields. For backward compatibility, allow 32-bit wide loads from offsetof(struct bpf_sock, dst_port).

While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.

Reported-by: Menglong Dong imagedong@tencent.com Signed-off-by: Jakub Sitnicki jakub@cloudflare.com Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/uapi/linux/bpf.h | 3 ++- net/core/filter.c | 10 +++++++++- 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 2b3c3f83076c..61bbaf340a89 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -5414,7 +5414,8 @@ struct bpf_sock { __u32 src_ip4; __u32 src_ip6[4]; __u32 src_port; /* host byte order */ - __u32 dst_port; /* network byte order */ + __be16 dst_port; /* network byte order */ + __u16 :16; /* zero padding */ __u32 dst_ip4; __u32 dst_ip6[4]; __u32 state; diff --git a/net/core/filter.c b/net/core/filter.c index d4cdf11656b3..4721ed65bcc5 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -7975,6 +7975,7 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type, struct bpf_insn_access_aux *info) { const int size_default = sizeof(__u32); + int field_size;

if (off < 0 || off >= sizeof(struct bpf_sock)) return false; @@ -7986,7 +7987,6 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type, case offsetof(struct bpf_sock, family): case offsetof(struct bpf_sock, type): case offsetof(struct bpf_sock, protocol): - case offsetof(struct bpf_sock, dst_port): case offsetof(struct bpf_sock, src_port): case offsetof(struct bpf_sock, rx_queue_mapping): case bpf_ctx_range(struct bpf_sock, src_ip4): @@ -7995,6 +7995,14 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type, case bpf_ctx_range_till(struct bpf_sock, dst_ip6[0], dst_ip6[3]): bpf_ctx_record_field_size(info, size_default); return bpf_ctx_narrow_access_ok(off, size, size_default); + case bpf_ctx_range(struct bpf_sock, dst_port): + field_size = size == size_default ? + size_default : sizeof_field(struct bpf_sock, dst_port); + bpf_ctx_record_field_size(info, field_size); + return bpf_ctx_narrow_access_ok(off, size, field_size); + case offsetofend(struct bpf_sock, dst_port) ... + offsetof(struct bpf_sock, dst_ip4) - 1: + return false; }

return size == size_default;

From: Yang Guang yang.guang5@zte.com.cn

[ Upstream commit 2245ea91fd3a04cafbe2f54911432a8657528c3b ]

coccinelle report: ./drivers/scsi/bfa/bfad_attr.c:908:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:860:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:888:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:853:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:808:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:728:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:822:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:927:9-17: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:900:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:874:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:714:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:839:8-16: WARNING: use scnprintf or sprintf

Use sysfs_emit() instead of scnprintf() or sprintf().

Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.164318146... Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Yang Guang yang.guang5@zte.com.cn Signed-off-by: David Yang davidcomponentone@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/bfa/bfad_attr.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index c8b947c16069..0254e610ea8f 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -711,7 +711,7 @@ bfad_im_serial_num_show(struct device *dev, struct device_attribute *attr, char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];

bfa_get_adapter_serial_num(&bfad->bfa, serial_num); - return snprintf(buf, PAGE_SIZE, "%s\n", serial_num); + return sysfs_emit(buf, "%s\n", serial_num); }

static ssize_t @@ -725,7 +725,7 @@ bfad_im_model_show(struct device *dev, struct device_attribute *attr, char model[BFA_ADAPTER_MODEL_NAME_LEN];

bfa_get_adapter_model(&bfad->bfa, model); - return snprintf(buf, PAGE_SIZE, "%s\n", model); + return sysfs_emit(buf, "%s\n", model); }

static ssize_t @@ -805,7 +805,7 @@ bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr, snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN, "Invalid Model");

- return snprintf(buf, PAGE_SIZE, "%s\n", model_descr); + return sysfs_emit(buf, "%s\n", model_descr); }

static ssize_t @@ -819,7 +819,7 @@ bfad_im_node_name_show(struct device *dev, struct device_attribute *attr, u64 nwwn;

nwwn = bfa_fcs_lport_get_nwwn(port->fcs_port); - return snprintf(buf, PAGE_SIZE, "0x%llx\n", cpu_to_be64(nwwn)); + return sysfs_emit(buf, "0x%llx\n", cpu_to_be64(nwwn)); }

static ssize_t @@ -836,7 +836,7 @@ bfad_im_symbolic_name_show(struct device *dev, struct device_attribute *attr, bfa_fcs_lport_get_attr(&bfad->bfa_fcs.fabric.bport, &port_attr); strlcpy(symname, port_attr.port_cfg.sym_name.symname, BFA_SYMNAME_MAXLEN); - return snprintf(buf, PAGE_SIZE, "%s\n", symname); + return sysfs_emit(buf, "%s\n", symname); }

static ssize_t @@ -850,14 +850,14 @@ bfad_im_hw_version_show(struct device *dev, struct device_attribute *attr, char hw_ver[BFA_VERSION_LEN];

bfa_get_pci_chip_rev(&bfad->bfa, hw_ver); - return snprintf(buf, PAGE_SIZE, "%s\n", hw_ver); + return sysfs_emit(buf, "%s\n", hw_ver); }

static ssize_t bfad_im_drv_version_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_VERSION); + return sysfs_emit(buf, "%s\n", BFAD_DRIVER_VERSION); }

static ssize_t @@ -871,7 +871,7 @@ bfad_im_optionrom_version_show(struct device *dev, char optrom_ver[BFA_VERSION_LEN];

bfa_get_adapter_optrom_ver(&bfad->bfa, optrom_ver); - return snprintf(buf, PAGE_SIZE, "%s\n", optrom_ver); + return sysfs_emit(buf, "%s\n", optrom_ver); }

static ssize_t @@ -885,7 +885,7 @@ bfad_im_fw_version_show(struct device *dev, struct device_attribute *attr, char fw_ver[BFA_VERSION_LEN];

bfa_get_adapter_fw_ver(&bfad->bfa, fw_ver); - return snprintf(buf, PAGE_SIZE, "%s\n", fw_ver); + return sysfs_emit(buf, "%s\n", fw_ver); }

static ssize_t @@ -897,7 +897,7 @@ bfad_im_num_of_ports_show(struct device *dev, struct device_attribute *attr, (struct bfad_im_port_s *) shost->hostdata[0]; struct bfad_s *bfad = im_port->bfad;

- return snprintf(buf, PAGE_SIZE, "%d\n", + return sysfs_emit(buf, "%d\n", bfa_get_nports(&bfad->bfa)); }

@@ -905,7 +905,7 @@ static ssize_t bfad_im_drv_name_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_NAME); + return sysfs_emit(buf, "%s\n", BFAD_DRIVER_NAME); }

static ssize_t @@ -924,14 +924,14 @@ bfad_im_num_of_discovered_ports_show(struct device *dev, rports = kcalloc(nrports, sizeof(struct bfa_rport_qualifier_s), GFP_ATOMIC); if (rports == NULL) - return snprintf(buf, PAGE_SIZE, "Failed\n"); + return sysfs_emit(buf, "Failed\n");

spin_lock_irqsave(&bfad->bfad_lock, flags); bfa_fcs_lport_get_rport_quals(port->fcs_port, rports, &nrports); spin_unlock_irqrestore(&bfad->bfad_lock, flags); kfree(rports);

- return snprintf(buf, PAGE_SIZE, "%d\n", nrports); + return sysfs_emit(buf, "%d\n", nrports); }

static DEVICE_ATTR(serial_number, S_IRUGO,

From: Evgeny Boger boger@wirenboard.com

[ Upstream commit d4f408cdcd26921c1268cb8dcbe8ffb6faf837f3 ]

As stated in [1], negative current values are used for discharging batteries.

AXP PMICs internally have two different ADC channels for shunt current measurement: one used during charging and one during discharging. The values reported by these ADCs are unsigned. While the driver properly selects ADC channel to get the data from, it doesn't apply negative sign when reporting discharging current.

[1] Documentation/ABI/testing/sysfs-class-power

Signed-off-by: Evgeny Boger boger@wirenboard.com Acked-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/axp20x_battery.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c index 18a9db0df4b1..335e12cc5e2f 100644 --- a/drivers/power/supply/axp20x_battery.c +++ b/drivers/power/supply/axp20x_battery.c @@ -186,7 +186,6 @@ static int axp20x_battery_get_prop(struct power_supply *psy, union power_supply_propval *val) { struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); - struct iio_channel *chan; int ret = 0, reg, val1;

switch (psp) { @@ -266,12 +265,12 @@ static int axp20x_battery_get_prop(struct power_supply *psy, if (ret) return ret;

- if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) - chan = axp20x_batt->batt_chrg_i; - else - chan = axp20x_batt->batt_dischrg_i; - - ret = iio_read_channel_processed(chan, &val->intval); + if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) { + ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval); + } else { + ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, &val1); + val->intval = -val1; + } if (ret) return ret;

From: Lorenzo Bianconi lorenzo@kernel.org

[ Upstream commit 577298ec55dfc8b9aece54520f0258c3f93a6573 ]

Even if it is only a false-positive since skip_buf0/skip_buf1 are only used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in mt76_dma_rx_fill in order to fix the following UBSAN report:

[ 13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13 [ 13.924909] load of value 225 is not a valid value for type '_Bool' [ 13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu [ 13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021 [ 13.924915] Call Trace: [ 13.924917] <TASK> [ 13.924920] show_stack+0x52/0x58 [ 13.924925] dump_stack_lvl+0x4a/0x5f [ 13.924931] dump_stack+0x10/0x12 [ 13.924932] ubsan_epilogue+0x9/0x45 [ 13.924934] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 13.924935] ? __iommu_dma_map+0x84/0xf0 [ 13.924939] mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76] [ 13.924949] mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76] [ 13.924954] mt76_dma_init+0xc9/0x150 [mt76] [ 13.924959] ? mt7921_dma_enable+0x110/0x110 [mt7921e] [ 13.924966] mt7921_dma_init+0x1e3/0x260 [mt7921e] [ 13.924970] mt7921_register_device+0x29d/0x510 [mt7921e] [ 13.924975] mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e] [ 13.924980] mt7921_pci_probe+0x43/0x60 [mt7921e] [ 13.924984] local_pci_probe+0x4b/0x90 [ 13.924987] pci_device_probe+0x115/0x1f0 [ 13.924989] really_probe+0x21e/0x420 [ 13.924992] __driver_probe_device+0x115/0x190 [ 13.924994] driver_probe_device+0x23/0xc0 [ 13.924996] __driver_attach+0xbd/0x1d0 [ 13.924998] ? __device_attach_driver+0x110/0x110 [ 13.924999] bus_for_each_dev+0x7e/0xc0 [ 13.925001] driver_attach+0x1e/0x20 [ 13.925003] bus_add_driver+0x135/0x200 [ 13.925005] driver_register+0x95/0xf0 [ 13.925008] ? 0xffffffffc0766000 [ 13.925010] __pci_register_driver+0x68/0x70 [ 13.925011] mt7921_pci_driver_init+0x23/0x1000 [mt7921e] [ 13.925015] do_one_initcall+0x48/0x1d0 [ 13.925019] ? kmem_cache_alloc_trace+0x19e/0x2e0 [ 13.925022] do_init_module+0x62/0x280 [ 13.925025] load_module+0xac9/0xbb0 [ 13.925027] __do_sys_finit_module+0xbf/0x120 [ 13.925029] __x64_sys_finit_module+0x18/0x20 [ 13.925030] do_syscall_64+0x5c/0xc0 [ 13.925033] ? do_syscall_64+0x69/0xc0 [ 13.925034] ? sysvec_reschedule_ipi+0x78/0xe0 [ 13.925036] ? asm_sysvec_reschedule_ipi+0xa/0x20 [ 13.925039] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 13.925040] RIP: 0033:0x7fbf2b90f94d [ 13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d [ 13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013 [ 13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441 [ 13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0 [ 13.925053] </TASK>

Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/dma.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c index 5e1c1506a4c6..7aecde35cb9a 100644 --- a/drivers/net/wireless/mediatek/mt76/dma.c +++ b/drivers/net/wireless/mediatek/mt76/dma.c @@ -465,6 +465,7 @@ mt76_dma_rx_fill(struct mt76_dev *dev, struct mt76_queue *q)

qbuf.addr = addr + offset; qbuf.len = len - offset; + qbuf.skip_unmap = false; mt76_dma_add_buf(dev, q, &qbuf, 1, 0, buf, NULL); frames++; }

From: Yonghong Song yhs@fb.com

[ Upstream commit 0908a66ad1124c1634c33847ac662106f7f2c198 ]

There are cases where clang compiler is packaged in a way readelf is a symbolic link to llvm-readelf. In such cases, llvm-readelf will be used instead of default binutils readelf, and the following error will appear during libbpf build:

# Warning: Num of global symbols in # /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367) # does NOT match with num of versioned symbols in # /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383). # Please make sure all LIBBPF_API symbols are versioned in libbpf.map. # --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ... # +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ... # @@ -324,6 +324,22 @@ # btf__str_by_offset # btf__type_by_id # btf__type_cnt # +LIBBPF_0.0.1 # +LIBBPF_0.0.2 # +LIBBPF_0.0.3 # +LIBBPF_0.0.4 # +LIBBPF_0.0.5 # +LIBBPF_0.0.6 # +LIBBPF_0.0.7 # +LIBBPF_0.0.8 # +LIBBPF_0.0.9 # +LIBBPF_0.1.0 # +LIBBPF_0.2.0 # +LIBBPF_0.3.0 # +LIBBPF_0.4.0 # +LIBBPF_0.5.0 # +LIBBPF_0.6.0 # +LIBBPF_0.7.0 # libbpf_attach_type_by_name # libbpf_find_kernel_btf # libbpf_find_vmlinux_btf_id # make[2]: *** [Makefile:184: check_abi] Error 1 # make[1]: *** [Makefile:140: all] Error 2

The above failure is due to different printouts for some ABS versioned symbols. For example, with the same libbpf.so, $ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS 134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0 202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0 ... $ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS 134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0@@LIBBPF_0.5.0 202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0@@LIBBPF_0.6.0 ... The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does. Such a difference caused libbpf build failure with llvm-readelf.

The proposed fix filters out all ABS symbols as they are not part of the comparison. This works for both binutils readelf and llvm-readelf.

Reported-by: Delyan Kratunov delyank@fb.com Signed-off-by: Yonghong Song yhs@fb.com Signed-off-by: Andrii Nakryiko andrii@kernel.org Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/lib/bpf/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/lib/bpf/Makefile +++ b/tools/lib/bpf/Makefile @@ -129,7 +129,7 @@ GLOBAL_SYM_COUNT = $(shell readelf -s -- sort -u | wc -l) VERSIONED_SYM_COUNT = $(shell readelf --dyn-syms --wide $(OUTPUT)libbpf.so | \ sed 's/[.*]//' | \ - awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}' | \ + awk '/GLOBAL/ && /DEFAULT/ && !/UND|ABS/ {print $$NF}' | \ grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | sort -u | wc -l)

CMD_TARGETS = $(LIB_TARGET) $(PC_FILE) @@ -192,7 +192,7 @@ check_abi: $(OUTPUT)libbpf.so $(VERSION_ sort -u > $(OUTPUT)libbpf_global_syms.tmp; \ readelf --dyn-syms --wide $(OUTPUT)libbpf.so | \ sed 's/[.*]//' | \ - awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}'| \ + awk '/GLOBAL/ && /DEFAULT/ && !/UND|ABS/ {print $$NF}'| \ grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | \ sort -u > $(OUTPUT)libbpf_versioned_syms.tmp; \ diff -u $(OUTPUT)libbpf_global_syms.tmp \

From: Eric Dumazet edumazet@google.com

[ Upstream commit 9c1be1935fb68b2413796cdc03d019b8cf35ab51 ]

While testing a patch that will follow later ("net: add netns refcount tracker to struct nsproxy") I found that devtmpfs_init() was called before init_net was initialized.

This is a bug, because devtmpfs_setup() calls ksys_unshare(CLONE_NEWNS);

This has the effect of increasing init_net refcount, which will be later overwritten to 1, as part of setup_net(&init_net)

We had too many prior patches [1] trying to work around the root cause.

Really, make sure init_net is in BSS section, and that net_ns_init() is called earlier at boot time.

Note that another patch ("vfs: add netns refcount tracker to struct fs_context") also will need net_ns_init() being called before vfs_caches_init()

As a bonus, this patch saves around 4KB in .data section.

[1]

f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace") b5082df8019a ("net: Initialise init_net.count to 1") 734b65417b24 ("net: Statically initialize init_net.dev_base_head")

v2: fixed a build error reported by kernel build bots (CONFIG_NET=n)

Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/net_namespace.h | 6 ++++++ init/main.c | 2 ++ net/core/dev.c | 3 +-- net/core/net_namespace.c | 17 +++++------------ 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index bb5fa5914032..2ba326f9e004 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -479,4 +479,10 @@ static inline void fnhe_genid_bump(struct net *net) atomic_inc(&net->fnhe_genid); }

+#ifdef CONFIG_NET +void net_ns_init(void); +#else +static inline void net_ns_init(void) {} +#endif + #endif /* __NET_NET_NAMESPACE_H */ diff --git a/init/main.c b/init/main.c index bb984ed79de0..cb68bc48a682 100644 --- a/init/main.c +++ b/init/main.c @@ -99,6 +99,7 @@ #include <linux/kcsan.h> #include <linux/init_syscalls.h> #include <linux/stackdepot.h> +#include <net/net_namespace.h>

#include <asm/io.h> #include <asm/bugs.h> @@ -1113,6 +1114,7 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void) key_init(); security_init(); dbg_late_init(); + net_ns_init(); vfs_caches_init(); pagecache_init(); signals_init(); diff --git a/net/core/dev.c b/net/core/dev.c index 2078d04c6482..8c47e0f2075d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -11403,8 +11403,7 @@ static int __net_init netdev_init(struct net *net) BUILD_BUG_ON(GRO_HASH_BUCKETS > 8 * sizeof_field(struct napi_struct, gro_bitmask));

- if (net != &init_net) - INIT_LIST_HEAD(&net->dev_base_head); + INIT_LIST_HEAD(&net->dev_base_head);

net->dev_name_head = netdev_create_hash(); if (net->dev_name_head == NULL) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 9702d2b0d920..9745cb6fdf51 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -44,13 +44,7 @@ EXPORT_SYMBOL_GPL(net_rwsem); static struct key_tag init_net_key_domain = { .usage = REFCOUNT_INIT(1) }; #endif

-struct net init_net = { - .ns.count = REFCOUNT_INIT(1), - .dev_base_head = LIST_HEAD_INIT(init_net.dev_base_head), -#ifdef CONFIG_KEYS - .key_domain = &init_net_key_domain, -#endif -}; +struct net init_net; EXPORT_SYMBOL(init_net);

static bool init_net_initialized; @@ -1081,7 +1075,7 @@ static void rtnl_net_notifyid(struct net *net, int cmd, int id, u32 portid, rtnl_set_sk_err(net, RTNLGRP_NSID, err); }

-static int __init net_ns_init(void) +void __init net_ns_init(void) { struct net_generic *ng;

@@ -1102,6 +1096,9 @@ static int __init net_ns_init(void)

rcu_assign_pointer(init_net.gen, ng);

+#ifdef CONFIG_KEYS + init_net.key_domain = &init_net_key_domain; +#endif down_write(&pernet_ops_rwsem); if (setup_net(&init_net, &init_user_ns)) panic("Could not setup the initial network namespace"); @@ -1116,12 +1113,8 @@ static int __init net_ns_init(void) RTNL_FLAG_DOIT_UNLOCKED); rtnl_register(PF_UNSPEC, RTM_GETNSID, rtnl_net_getid, rtnl_net_dumpid, RTNL_FLAG_DOIT_UNLOCKED); - - return 0; }

-pure_initcall(net_ns_init); - static void free_exit_list(struct pernet_operations *ops, struct list_head *net_exit_list) { ops_pre_exit_list(ops, net_exit_list);

From: Rajneesh Bhardwaj rajneesh.bhardwaj@amd.com

[ Upstream commit 447c7997b62a5115ba4da846dcdee4fc12298a6a ]

Noticed the below warning while running a pytorch workload on vega10 GPUs. Change to trylock to avoid conflicts with already held reservation locks.

[ +0.000003] WARNING: possible recursive locking detected [ +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted [ +0.000004] -------------------------------------------- [ +0.000002] python/4822 is trying to acquire lock: [ +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000203] but task is already holding lock: [ +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000017] other info that might help us debug this: [ +0.000002] Possible unsafe locking scenario:

[ +0.000003] CPU0 [ +0.000002] ---- [ +0.000002] lock(reservation_ww_class_mutex); [ +0.000004] lock(reservation_ww_class_mutex); [ +0.000003] *** DEADLOCK ***

[ +0.000002] May be due to missing lock nesting notation

[ +0.000003] 7 locks held by python/4822: [ +0.000003] #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at: kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu] [ +0.000232] #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu] [ +0.000241] #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu] [ +0.000236] #3: ffffb2b35606fd28 (reservation_ww_class_acquire){+.+.}-{0:0}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu] [ +0.000235] #4: ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000015] #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at: drm_dev_enter+0x5/0xa0 [drm] [ +0.000038] #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3}, at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu] [ +0.000195] stack backtrace: [ +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted 5.13.0-kfd-rajneesh #1030 [ +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02 08/29/2018 [ +0.000003] Call Trace: [ +0.000003] dump_stack+0x6d/0x89 [ +0.000010] __lock_acquire+0xb93/0x1a90 [ +0.000009] lock_acquire+0x25d/0x2d0 [ +0.000005] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] __ww_mutex_lock.constprop.17+0xca/0x1060 [ +0.000007] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] ? lock_release+0x13f/0x270 [ +0.000005] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000185] ttm_bo_release+0x4c6/0x580 [ttm] [ +0.000010] amdgpu_bo_unref+0x1a/0x30 [amdgpu] [ +0.000183] amdgpu_vm_free_table+0x76/0xa0 [amdgpu] [ +0.000189] amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu] [ +0.000189] amdgpu_vm_update_ptes+0x411/0x770 [amdgpu] [ +0.000191] amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu] [ +0.000191] amdgpu_vm_bo_update+0x251/0x610 [amdgpu] [ +0.000191] update_gpuvm_pte+0xcc/0x290 [amdgpu] [ +0.000229] ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu] [ +0.000190] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60 [amdgpu] [ +0.000234] kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu] [ +0.000218] kfd_ioctl+0x2b9/0x600 [amdgpu] [ +0.000216] ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu] [ +0.000216] ? lock_release+0x13f/0x270 [ +0.000006] ? __fget_files+0x107/0x1e0 [ +0.000007] __x64_sys_ioctl+0x8b/0xd0 [ +0.000007] do_syscall_64+0x36/0x70 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000007] RIP: 0033:0x7fbff90a7317 [ +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 [ +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX: 00007fbff90a7317 [ +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI: 0000000000000004 [ +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09: 00007fbcc402d880 [ +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12: 00000000c0184b18 [ +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15: 00007fbcc402d820

Cc: Christian König christian.koenig@amd.com Cc: Felix Kuehling Felix.Kuehling@amd.com Cc: Alex Deucher Alexander.Deucher@amd.com

Reviewed-by: Christian König christian.koenig@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Rajneesh Bhardwaj rajneesh.bhardwaj@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index 4fcfc2313b8c..ea792b6a1c0f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -1286,7 +1286,8 @@ void amdgpu_bo_release_notify(struct ttm_buffer_object *bo) !(abo->flags & AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE)) return;

- dma_resv_lock(bo->base.resv, NULL); + if (WARN_ON_ONCE(!dma_resv_trylock(bo->base.resv))) + return;

r = amdgpu_fill_buffer(abo, AMDGPU_POISON, bo->base.resv, &fence); if (!WARN_ON(r)) {

From: Mahesh Rajashekhara mahesh.rajashekhara@microchip.com

[ Upstream commit 3ada501d602abf02353445c03bb3258146445d90 ]

Avoid dropping into shell if the controller is in locked up state.

Driver issues SIS soft reset to bring back the controller to SIS mode while OS boots into kdump mode.

If the controller is in lockup state, SIS soft reset does not work.

Since the controller lockup code has not been cleared, driver considers the firmware is no longer up and running. Driver returns back an error code to OS and the kdump fails.

Link: https://lore.kernel.org/r/164375212337.440833.11955356190354940369.stgit@bru... Reviewed-by: Kevin Barnett kevin.barnett@microchip.com Reviewed-by: Scott Benesh scott.benesh@microchip.com Reviewed-by: Scott Teel scott.teel@microchip.com Signed-off-by: Mahesh Rajashekhara mahesh.rajashekhara@microchip.com Signed-off-by: Don Brace don.brace@microchip.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/smartpqi/smartpqi_init.c | 39 ++++++++++++++++----------- 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index 2db9f874cc51..f3749e508673 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -7855,6 +7855,21 @@ static int pqi_force_sis_mode(struct pqi_ctrl_info *ctrl_info) return pqi_revert_to_sis_mode(ctrl_info); }

+static void pqi_perform_lockup_action(void) +{ + switch (pqi_lockup_action) { + case PANIC: + panic("FATAL: Smart Family Controller lockup detected"); + break; + case REBOOT: + emergency_restart(); + break; + case NONE: + default: + break; + } +} + static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info) { int rc; @@ -7879,8 +7894,15 @@ static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info) * commands. */ rc = sis_wait_for_ctrl_ready(ctrl_info); - if (rc) + if (rc) { + if (reset_devices) { + dev_err(&ctrl_info->pci_dev->dev, + "kdump init failed with error %d\n", rc); + pqi_lockup_action = REBOOT; + pqi_perform_lockup_action(); + } return rc; + }

/* * Get the controller properties. This allows us to determine @@ -8605,21 +8627,6 @@ static int pqi_ofa_ctrl_restart(struct pqi_ctrl_info *ctrl_info, unsigned int de return pqi_ctrl_init_resume(ctrl_info); }

-static void pqi_perform_lockup_action(void) -{ - switch (pqi_lockup_action) { - case PANIC: - panic("FATAL: Smart Family Controller lockup detected"); - break; - case REBOOT: - emergency_restart(); - break; - case NONE: - default: - break; - } -} - static struct pqi_raid_error_info pqi_ctrl_offline_raid_error_info = { .data_out_result = PQI_DATA_IN_OUT_HARDWARE_ERROR, .status = SAM_STAT_CHECK_CONDITION,

From: Zhou Guanghui zhouguanghui1@huawei.com

[ Upstream commit 30de2b541af98179780054836b48825fcfba4408 ]

During event processing, events are read from the event queue one by one until the queue is empty.If the master device continuously requests address access at the same time and the SMMU generates events, the cyclic processing of the event takes a long time and softlockup warnings may be reported.

arm-smmu-v3 arm-smmu-v3.34.auto: event 0x0a received: arm-smmu-v3 arm-smmu-v3.34.auto: 0x00007f220000280a arm-smmu-v3 arm-smmu-v3.34.auto: 0x000010000000007e arm-smmu-v3 arm-smmu-v3.34.auto: 0x00000000034e8670 watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [irq/268-arm-smm:247] Call trace: _dev_info+0x7c/0xa0 arm_smmu_evtq_thread+0x1c0/0x230 irq_thread_fn+0x30/0x80 irq_thread+0x128/0x210 kthread+0x134/0x138 ret_from_fork+0x10/0x1c Kernel panic - not syncing: softlockup: hung tasks

Fix this by calling cond_resched() after the event information is printed.

Signed-off-by: Zhou Guanghui zhouguanghui1@huawei.com Link: https://lore.kernel.org/r/20220119070754.26528-1-zhouguanghui1@huawei.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index f5848b351b19..af00714c8056 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -1558,6 +1558,7 @@ static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev) dev_info(smmu->dev, "\t0x%016llx\n", (unsigned long long)evt[i]);

+ cond_resched(); }

/*

From: Marc Zyngier maz@kernel.org

[ Upstream commit 5177fe91e4cf78a659aada2c9cf712db4d788481 ]

Userspace can specify which events a guest is allowed to use with the KVM_ARM_VCPU_PMU_V3_FILTER attribute. The list of allowed events can be identified by a guest from reading the PMCEID{0,1}_EL0 registers.

Changing the PMU event filter after a VCPU has run can cause reads of the registers performed before the filter is changed to return different values than reads performed with the new event filter in place. The architecture defines the two registers as read-only, and this behaviour contradicts that.

Keep track when the first VCPU has run and deny changes to the PMU event filter to prevent this from happening.

Signed-off-by: Marc Zyngier maz@kernel.org [ Alexandru E: Added commit message, updated ioctl documentation ] Signed-off-by: Alexandru Elisei alexandru.elisei@arm.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20220127161759.53553-2-alexandru.elisei@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/virt/kvm/devices/vcpu.rst | 2 +- arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 4 +++ arch/arm64/kvm/pmu-emul.c | 33 +++++++++++++++---------- 4 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst index 60a29972d3f1..d063aaee5bb7 100644 --- a/Documentation/virt/kvm/devices/vcpu.rst +++ b/Documentation/virt/kvm/devices/vcpu.rst @@ -70,7 +70,7 @@ irqchip. -ENODEV PMUv3 not supported or GIC not initialized -ENXIO PMUv3 not properly configured or in-kernel irqchip not configured as required prior to calling this attribute - -EBUSY PMUv3 already initialized + -EBUSY PMUv3 already initialized or a VCPU has already run -EINVAL Invalid filter range ======= ======================================================

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index d016f27af6da..8c7ba346d713 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -137,6 +137,7 @@ struct kvm_arch {

/* Memory Tagging Extension enabled for the guest */ bool mte_enabled; + bool ran_once; };

struct kvm_vcpu_fault_info { diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 1eadf9088880..6f3be4d44abe 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -629,6 +629,10 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu) if (kvm_vm_is_protected(kvm)) kvm_call_hyp_nvhe(__pkvm_vcpu_init_traps, vcpu);

+ mutex_lock(&kvm->lock); + kvm->arch.ran_once = true; + mutex_unlock(&kvm->lock); + return ret; }

diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index a5e4bbf5e68f..c996fc562da4 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -921,6 +921,8 @@ static bool pmu_irq_is_valid(struct kvm *kvm, int irq)

int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) { + struct kvm *kvm = vcpu->kvm; + if (!kvm_vcpu_has_pmu(vcpu)) return -ENODEV;

@@ -938,7 +940,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) int __user *uaddr = (int __user *)(long)attr->addr; int irq;

- if (!irqchip_in_kernel(vcpu->kvm)) + if (!irqchip_in_kernel(kvm)) return -EINVAL;

if (get_user(irq, uaddr)) @@ -948,7 +950,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) if (!(irq_is_ppi(irq) || irq_is_spi(irq))) return -EINVAL;

- if (!pmu_irq_is_valid(vcpu->kvm, irq)) + if (!pmu_irq_is_valid(kvm, irq)) return -EINVAL;

if (kvm_arm_pmu_irq_initialized(vcpu)) @@ -963,7 +965,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) struct kvm_pmu_event_filter filter; int nr_events;

- nr_events = kvm_pmu_event_mask(vcpu->kvm) + 1; + nr_events = kvm_pmu_event_mask(kvm) + 1;

uaddr = (struct kvm_pmu_event_filter __user *)(long)attr->addr;

@@ -975,12 +977,17 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) filter.action != KVM_PMU_EVENT_DENY)) return -EINVAL;

- mutex_lock(&vcpu->kvm->lock); + mutex_lock(&kvm->lock); + + if (kvm->arch.ran_once) { + mutex_unlock(&kvm->lock); + return -EBUSY; + }

- if (!vcpu->kvm->arch.pmu_filter) { - vcpu->kvm->arch.pmu_filter = bitmap_alloc(nr_events, GFP_KERNEL_ACCOUNT); - if (!vcpu->kvm->arch.pmu_filter) { - mutex_unlock(&vcpu->kvm->lock); + if (!kvm->arch.pmu_filter) { + kvm->arch.pmu_filter = bitmap_alloc(nr_events, GFP_KERNEL_ACCOUNT); + if (!kvm->arch.pmu_filter) { + mutex_unlock(&kvm->lock); return -ENOMEM; }

@@ -991,17 +998,17 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) * events, the default is to allow. */ if (filter.action == KVM_PMU_EVENT_ALLOW) - bitmap_zero(vcpu->kvm->arch.pmu_filter, nr_events); + bitmap_zero(kvm->arch.pmu_filter, nr_events); else - bitmap_fill(vcpu->kvm->arch.pmu_filter, nr_events); + bitmap_fill(kvm->arch.pmu_filter, nr_events); }

if (filter.action == KVM_PMU_EVENT_ALLOW) - bitmap_set(vcpu->kvm->arch.pmu_filter, filter.base_event, filter.nevents); + bitmap_set(kvm->arch.pmu_filter, filter.base_event, filter.nevents); else - bitmap_clear(vcpu->kvm->arch.pmu_filter, filter.base_event, filter.nevents); + bitmap_clear(kvm->arch.pmu_filter, filter.base_event, filter.nevents);

- mutex_unlock(&vcpu->kvm->lock); + mutex_unlock(&kvm->lock);

return 0; }

From: Sebastian Andrzej Siewior bigeasy@linutronix.de

[ Upstream commit 4f9bf2a2f5aacf988e6d5e56b961ba45c5a25248 ]

Commit 9652dc2eb9e40 ("tcp: relax listening_hash operations")

removed the need to disable bottom half while acquiring listening_hash.lock. There are still two callers left which disable bottom half before the lock is acquired.

On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts as a lock to ensure that resources, that are protected by disabling bottom halves, remain protected. This leads to a circular locking dependency if the lock acquired with disabled bottom halves is also acquired with enabled bottom halves followed by disabling bottom halves. This is the reverse locking order. It has been observed with inet_listen_hashbucket::lock:

local_bh_disable() + spin_lock(&ilb->lock): inet_listen() inet_csk_listen_start() sk->sk_prot->hash() := inet_hash() local_bh_disable() __inet_hash() spin_lock(&ilb->lock); acquire(&ilb->lock);

Reverse order: spin_lock(&ilb2->lock) + local_bh_disable(): tcp_seq_next() listening_get_next() spin_lock(&ilb2->lock); acquire(&ilb2->lock);

tcp4_seq_show() get_tcp4_sock() sock_i_ino() read_lock_bh(&sk->sk_callback_lock); acquire(softirq_ctrl) // <---- whoops acquire(&sk->sk_callback_lock)

Drop local_bh_disable() around __inet_hash() which acquires listening_hash->lock. Split inet_unhash() and acquire the listen_hashbucket lock without disabling bottom halves; the inet_ehash lock with disabled bottom halves.

Reported-by: Mike Galbraith efault@gmx.de Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx... Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/inet_hashtables.c | 53 ++++++++++++++++++++++--------------- net/ipv6/inet6_hashtables.c | 5 +--- 2 files changed, 33 insertions(+), 25 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 75737267746f..7bd1e10086f0 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -637,7 +637,9 @@ int __inet_hash(struct sock *sk, struct sock *osk) int err = 0;

if (sk->sk_state != TCP_LISTEN) { + local_bh_disable(); inet_ehash_nolisten(sk, osk, NULL); + local_bh_enable(); return 0; } WARN_ON(!sk_unhashed(sk)); @@ -669,45 +671,54 @@ int inet_hash(struct sock *sk) { int err = 0;

- if (sk->sk_state != TCP_CLOSE) { - local_bh_disable(); + if (sk->sk_state != TCP_CLOSE) err = __inet_hash(sk, NULL); - local_bh_enable(); - }

return err; } EXPORT_SYMBOL_GPL(inet_hash);

-void inet_unhash(struct sock *sk) +static void __inet_unhash(struct sock *sk, struct inet_listen_hashbucket *ilb) { - struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo; - struct inet_listen_hashbucket *ilb = NULL; - spinlock_t *lock; - if (sk_unhashed(sk)) return;

- if (sk->sk_state == TCP_LISTEN) { - ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)]; - lock = &ilb->lock; - } else { - lock = inet_ehash_lockp(hashinfo, sk->sk_hash); - } - spin_lock_bh(lock); - if (sk_unhashed(sk)) - goto unlock; - if (rcu_access_pointer(sk->sk_reuseport_cb)) reuseport_stop_listen_sock(sk); if (ilb) { + struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo; + inet_unhash2(hashinfo, sk); ilb->count--; } __sk_nulls_del_node_init_rcu(sk); sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1); -unlock: - spin_unlock_bh(lock); +} + +void inet_unhash(struct sock *sk) +{ + struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo; + + if (sk_unhashed(sk)) + return; + + if (sk->sk_state == TCP_LISTEN) { + struct inet_listen_hashbucket *ilb; + + ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)]; + /* Don't disable bottom halves while acquiring the lock to + * avoid circular locking dependency on PREEMPT_RT. + */ + spin_lock(&ilb->lock); + __inet_unhash(sk, ilb); + spin_unlock(&ilb->lock); + } else { + spinlock_t *lock = inet_ehash_lockp(hashinfo, sk->sk_hash); + + spin_lock_bh(lock); + __inet_unhash(sk, NULL); + spin_unlock_bh(lock); + } } EXPORT_SYMBOL_GPL(inet_unhash);

diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 67c9114835c8..0a2e7f228391 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -333,11 +333,8 @@ int inet6_hash(struct sock *sk) { int err = 0;

- if (sk->sk_state != TCP_CLOSE) { - local_bh_disable(); + if (sk->sk_state != TCP_CLOSE) err = __inet_hash(sk, NULL); - local_bh_enable(); - }

return err; }

From: Sreekanth Reddy sreekanth.reddy@broadcom.com

[ Upstream commit 9992246127246a27cc7184f05cce6f62ac48f84e ]

The driver is missing to set the residual size while completing an I/O. Ensure proper data transfer size is reported to the kernel on I/O completion based on the transfer length reported by the firmware.

Link: https://lore.kernel.org/r/20220210095817.22828-7-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy sreekanth.reddy@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/mpi3mr/mpi3mr_os.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c index fe10f257b5a4..224a4155d9b4 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_os.c +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c @@ -2204,6 +2204,8 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, scmd->result = DID_OK << 16; goto out_success; } + + scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_count); if (ioc_status == MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_count == 0 && (scsi_status == MPI3_SCSI_STATUS_BUSY || scsi_status == MPI3_SCSI_STATUS_RESERVATION_CONFLICT ||

From: Christophe Leroy christophe.leroy@csgroup.eu

[ Upstream commit a4c182ecf33584b9b2d1aa9dad073014a504c01f ]

Commit 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines") included a spin_lock() to change_page_attr() in order to safely perform the three step operations. But then commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses") modify it to use pte_update() and do the operation safely against concurrent access.

In the meantime, Maxime reported some spinlock recursion.

[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217 [ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0 [ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523 [ 15.373350] Workqueue: events do_free_init [ 15.377615] Call Trace: [ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable) [ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4 [ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0 [ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8 [ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94 [ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134 [ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8 [ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c [ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8 [ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94 [ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8 [ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8 [ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210 [ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c

Remove the read / modify / write sequence to make the operation atomic and remove the spin_lock() in change_page_attr().

To do the operation atomically, we can't use pte modification helpers anymore. Because all platforms have different combination of bits, it is not easy to use those bits directly. But all have the _PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare two sets to know which bits are set or cleared.

For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you know which bit gets cleared and which bit get set when changing exec permission.

Reported-by: Maxime Bizon mbizon@freebox.fr Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/ Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.164034401... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/mm/pageattr.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/mm/pageattr.c b/arch/powerpc/mm/pageattr.c index 3bb9d168e3b3..85753e32a4de 100644 --- a/arch/powerpc/mm/pageattr.c +++ b/arch/powerpc/mm/pageattr.c @@ -15,12 +15,14 @@ #include <asm/pgtable.h>

+static pte_basic_t pte_update_delta(pte_t *ptep, unsigned long addr, + unsigned long old, unsigned long new) +{ + return pte_update(&init_mm, addr, ptep, old & ~new, new & ~old, 0); +} + /* - * Updates the attributes of a page in three steps: - * - * 1. take the page_table_lock - * 2. install the new entry with the updated attributes - * 3. flush the TLB + * Updates the attributes of a page atomically. * * This sequence is safe against concurrent updates, and also allows updating the * attributes of a page currently being executed or accessed. @@ -28,25 +30,21 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data) { long action = (long)data; - pte_t pte;

- spin_lock(&init_mm.page_table_lock); - - pte = ptep_get(ptep); - - /* modify the PTE bits as desired, then apply */ + /* modify the PTE bits as desired */ switch (action) { case SET_MEMORY_RO: - pte = pte_wrprotect(pte); + /* Don't clear DIRTY bit */ + pte_update_delta(ptep, addr, _PAGE_KERNEL_RW & ~_PAGE_DIRTY, _PAGE_KERNEL_RO); break; case SET_MEMORY_RW: - pte = pte_mkwrite(pte_mkdirty(pte)); + pte_update_delta(ptep, addr, _PAGE_KERNEL_RO, _PAGE_KERNEL_RW); break; case SET_MEMORY_NX: - pte = pte_exprotect(pte); + pte_update_delta(ptep, addr, _PAGE_KERNEL_ROX, _PAGE_KERNEL_RO); break; case SET_MEMORY_X: - pte = pte_mkexec(pte); + pte_update_delta(ptep, addr, _PAGE_KERNEL_RO, _PAGE_KERNEL_ROX); break; case SET_MEMORY_NP: pte_update(&init_mm, addr, ptep, _PAGE_PRESENT, 0, 0); @@ -59,16 +57,12 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data) break; }

- pte_update(&init_mm, addr, ptep, ~0UL, pte_val(pte), 0); - /* See ptesync comment in radix__set_pte_at() */ if (radix_enabled()) asm volatile("ptesync": : :"memory");

flush_tlb_kernel_range(addr, addr + PAGE_SIZE);

- spin_unlock(&init_mm.page_table_lock); - return 0; }

From: Sung Joon Kim sungkim@amd.com

[ Upstream commit 3b853c316c9321e195414a6fb121d1c2d45b1e87 ]

[why] In LTTPR non-transparent mode, we need to reset the cached lane settings before performing link training on the next PHY repeater. Otherwise, the cached lane settings will be used for the next clock recovery e.g. VS = MAX (3) which should not be the case according to the DP specs. We expect to use minimum lane settings on each clock recovery sequence.

[how] Reset DPCD and HW lane settings on each repeater LT. Set training pattern to 0 for the repeater that failed LT at the proper place.

Reviewed-by: Meenakshikumar Somasundaram Meenakshikumar.Somasundaram@amd.com Reviewed-by: Jun Lei Jun.Lei@amd.com Acked-by: Jasdeep Dhillon jdhillon@amd.com Signed-off-by: Sung Joon Kim sungkim@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 135ea1c422f2..f46aa7f8c35d 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -2124,21 +2124,26 @@ static enum link_training_result dp_perform_8b_10b_link_training( repeater_id--) { status = perform_clock_recovery_sequence(link, lt_settings, repeater_id);

- if (status != LINK_TRAINING_SUCCESS) + if (status != LINK_TRAINING_SUCCESS) { + repeater_training_done(link, repeater_id); break; + }

status = perform_channel_equalization_sequence(link, lt_settings, repeater_id);

+ repeater_training_done(link, repeater_id); + if (status != LINK_TRAINING_SUCCESS) break;

- repeater_training_done(link, repeater_id); + for (lane = 0; lane < LANE_COUNT_DP_MAX; lane++) { + lt_settings->dpcd_lane_settings[lane].raw = 0; + lt_settings->hw_lane_settings[lane].VOLTAGE_SWING = 0; + lt_settings->hw_lane_settings[lane].PRE_EMPHASIS = 0; + } } - - for (lane = 0; lane < (uint8_t)lt_settings->link_settings.lane_count; lane++) - lt_settings->dpcd_lane_settings[lane].raw = 0; }

if (status == LINK_TRAINING_SUCCESS) {

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit e285cb403994419e997749c9a52b9370884ae0c8 ]

The quirk handling may need to set some different properties which means using a different swnode, move the setting of the swnode to inside dwc3_pci_quirks() so that the quirk handling can choose a different swnode.

Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20220213130524.18748-4-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/dwc3-pci.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 06d0e88ec8af..4d9608cc55f7 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -185,7 +185,8 @@ static const struct software_node dwc3_pci_amd_mr_swnode = { .properties = dwc3_pci_mr_properties, };

-static int dwc3_pci_quirks(struct dwc3_pci *dwc) +static int dwc3_pci_quirks(struct dwc3_pci *dwc, + const struct software_node *swnode) { struct pci_dev *pdev = dwc->pci;

@@ -242,7 +243,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) } }

- return 0; + return device_add_software_node(&dwc->dwc3->dev, swnode); }

#ifdef CONFIG_PM @@ -307,11 +308,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) dwc->dwc3->dev.parent = dev; ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));

- ret = device_add_software_node(&dwc->dwc3->dev, (void *)id->driver_data); - if (ret < 0) - goto err; - - ret = dwc3_pci_quirks(dwc); + ret = dwc3_pci_quirks(dwc, (void *)id->driver_data); if (ret) goto err;

From: Luca Coelho luciano.coelho@intel.com

[ Upstream commit 3009c797c4b3840495e8f48d8d07f48d2ddfed80 ]

There was a small copy and paste mistake in the doc declaration of iwl_fw_ini_addr_val. Fix it.

Signed-off-by: Luca Coelho luciano.coelho@intel.com Link: https://lore.kernel.org/r/iwlwifi.20220205112029.aeec71c397b3.I0ba3234419eb8... Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h b/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h index 3988f5fea33a..6b2a2828cb83 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * Copyright (C) 2018-2021 Intel Corporation + * Copyright (C) 2018-2022 Intel Corporation */ #ifndef __iwl_fw_dbg_tlv_h__ #define __iwl_fw_dbg_tlv_h__ @@ -244,11 +244,10 @@ struct iwl_fw_ini_hcmd_tlv { } __packed; /* FW_TLV_DEBUG_HCMD_API_S_VER_1 */

/** -* struct iwl_fw_ini_conf_tlv - preset configuration TLV +* struct iwl_fw_ini_addr_val - Address and value to set it to * * @address: the base address * @value: value to set at address - */ struct iwl_fw_ini_addr_val { __le32 address;

From: Daniel Thompson daniel.thompson@linaro.org

[ Upstream commit 24b176d8827d167ac3b379317f60c0985f6e95aa ]

Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of irqs (and for "normal" kernels it is a nop). In this case I can find no evidence that suppressing forced threading is intentional. Had it been intentional then a driver must adopt the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels (and avoid calling any kernel API that uses regular spinlocks).

Fix this by removing the spurious additional flag.

This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI with PREEMPT_RT enabled.

Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20220201174734.196718-2-daniel.thompson@linaro.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 0afc3b756f92..09f8fa111dcc 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1871,7 +1871,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)

/* do not autoenable, will be enabled later */ ret = devm_request_irq(&pdev->dev, msm_host->irq, dsi_host_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN, + IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN, "dsi_isr", msm_host); if (ret < 0) { dev_err(&pdev->dev, "failed to request IRQ%u: %d\n",

From: Ido Schimmel idosch@nvidia.com

[ Upstream commit 0c51e12e218f20b7d976158fdc18019627326f7a ]

In case user space sends a packet destined to a broadcast address when a matching broadcast route is not configured, the kernel will create a unicast neighbour entry that will never be resolved [1].

When the broadcast route is configured, the unicast neighbour entry will not be invalidated and continue to linger, resulting in packets being dropped.

Solve this by invalidating unresolved neighbour entries for broadcast addresses after routes for these addresses are internally configured by the kernel. This allows the kernel to create a broadcast neighbour entry following the next route lookup.

Another possible solution that is more generic but also more complex is to have the ARP code register a listener to the FIB notification chain and invalidate matching neighbour entries upon the addition of broadcast routes.

It is also possible to wave off the issue as a user space problem, but it seems a bit excessive to expect user space to be that intimately familiar with the inner workings of the FIB/neighbour kernel code.

[1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.c...

Reported-by: Wang Hai wanghai38@huawei.com Signed-off-by: Ido Schimmel idosch@nvidia.com Tested-by: Wang Hai wanghai38@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/arp.h | 1 + net/ipv4/arp.c | 9 +++++++-- net/ipv4/fib_frontend.c | 5 ++++- 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/include/net/arp.h b/include/net/arp.h index 4950191f6b2b..4a23a97195f3 100644 --- a/include/net/arp.h +++ b/include/net/arp.h @@ -71,6 +71,7 @@ void arp_send(int type, int ptype, __be32 dest_ip, const unsigned char *src_hw, const unsigned char *th); int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir); void arp_ifdown(struct net_device *dev); +int arp_invalidate(struct net_device *dev, __be32 ip, bool force);

struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, struct net_device *dev, __be32 src_ip, diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 857a144b1ea9..5ee382309a9d 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1116,13 +1116,18 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev) return err; }

-static int arp_invalidate(struct net_device *dev, __be32 ip) +int arp_invalidate(struct net_device *dev, __be32 ip, bool force) { struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev); int err = -ENXIO; struct neigh_table *tbl = &arp_tbl;

if (neigh) { + if ((neigh->nud_state & NUD_VALID) && !force) { + neigh_release(neigh); + return 0; + } + if (neigh->nud_state & ~NUD_NOARP) err = neigh_update(neigh, NULL, NUD_FAILED, NEIGH_UPDATE_F_OVERRIDE| @@ -1169,7 +1174,7 @@ static int arp_req_delete(struct net *net, struct arpreq *r, if (!dev) return -EINVAL; } - return arp_invalidate(dev, ip); + return arp_invalidate(dev, ip, true); }

/* diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 4d61ddd8a0ec..1eb7795edb9d 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -1112,9 +1112,11 @@ void fib_add_ifaddr(struct in_ifaddr *ifa) return;

/* Add broadcast address, if it is explicitly assigned. */ - if (ifa->ifa_broadcast && ifa->ifa_broadcast != htonl(0xFFFFFFFF)) + if (ifa->ifa_broadcast && ifa->ifa_broadcast != htonl(0xFFFFFFFF)) { fib_magic(RTM_NEWROUTE, RTN_BROADCAST, ifa->ifa_broadcast, 32, prim, 0); + arp_invalidate(dev, ifa->ifa_broadcast, false); + }

if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) && (prefix != addr || ifa->ifa_prefixlen < 32)) { @@ -1128,6 +1130,7 @@ void fib_add_ifaddr(struct in_ifaddr *ifa) if (ifa->ifa_prefixlen < 31) { fib_magic(RTM_NEWROUTE, RTN_BROADCAST, prefix | ~mask, 32, prim, 0); + arp_invalidate(dev, prefix | ~mask, false); } } }

From: Mike Snitzer snitzer@redhat.com

[ Upstream commit fa247089de9936a46e290d4724cb5f0b845600f5 ]

Update both bio-based and request-based DM to requeue IO if the mapping table not available.

This race of IO being submitted before the DM device ready is so narrow, yet possible for initial table load given that the DM device's request_queue is created prior, that it best to requeue IO to handle this unlikely case.

Reported-by: Zhang Yi yi.zhang@huawei.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-rq.c | 7 ++++++- drivers/md/dm.c | 11 +++-------- 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c index 579ab6183d4d..dffeb47a9efb 100644 --- a/drivers/md/dm-rq.c +++ b/drivers/md/dm-rq.c @@ -499,8 +499,13 @@ static blk_status_t dm_mq_queue_rq(struct blk_mq_hw_ctx *hctx,

if (unlikely(!ti)) { int srcu_idx; - struct dm_table *map = dm_get_live_table(md, &srcu_idx); + struct dm_table *map;

+ map = dm_get_live_table(md, &srcu_idx); + if (unlikely(!map)) { + dm_put_live_table(md, srcu_idx); + return BLK_STS_RESOURCE; + } ti = dm_table_find_target(map, 0); dm_put_live_table(md, srcu_idx); } diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 5fd3660e07b5..af12c0accb59 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1587,15 +1587,10 @@ static void dm_submit_bio(struct bio *bio) struct dm_table *map;

map = dm_get_live_table(md, &srcu_idx); - if (unlikely(!map)) { - DMERR_LIMIT("%s: mapping table unavailable, erroring io", - dm_device_name(md)); - bio_io_error(bio); - goto out; - }

- /* If suspended, queue this IO for later */ - if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags))) { + /* If suspended, or map not yet available, queue this IO for later */ + if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) || + unlikely(!map)) { if (bio->bi_opf & REQ_NOWAIT) bio_wouldblock_error(bio); else if (bio->bi_opf & REQ_RAHEAD)

From: Alex Williamson alex.williamson@redhat.com

[ Upstream commit 6e031ec0e5a2dda53e12e0d2a7e9b15b47a3c502 ]

Resolve build errors reported against UML build for undefined ioport_map() and ioport_unmap() functions. Without this config option a device cannot have vfio_pci_core_device.has_vga set, so the existing function would always return -EINVAL anyway.

Reported-by: Geert Uytterhoeven geert@linux-m68k.org Link: https://lore.kernel.org/r/20220123125737.2658758-1-geert@linux-m68k.org Link: https://lore.kernel.org/r/164306582968.3758255.15192949639574660648.stgit@om... Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/vfio_pci_rdwr.c | 2 ++ include/linux/vfio_pci_core.h | 9 +++++++++ 2 files changed, 11 insertions(+)

diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c index 57d3b2cbbd8e..82ac1569deb0 100644 --- a/drivers/vfio/pci/vfio_pci_rdwr.c +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -288,6 +288,7 @@ ssize_t vfio_pci_bar_rw(struct vfio_pci_core_device *vdev, char __user *buf, return done; }

+#ifdef CONFIG_VFIO_PCI_VGA ssize_t vfio_pci_vga_rw(struct vfio_pci_core_device *vdev, char __user *buf, size_t count, loff_t *ppos, bool iswrite) { @@ -355,6 +356,7 @@ ssize_t vfio_pci_vga_rw(struct vfio_pci_core_device *vdev, char __user *buf,

return done; } +#endif

static void vfio_pci_ioeventfd_do_write(struct vfio_pci_ioeventfd *ioeventfd, bool test_mem) diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h index ef9a44b6cf5d..ae6f4838ab75 100644 --- a/include/linux/vfio_pci_core.h +++ b/include/linux/vfio_pci_core.h @@ -159,8 +159,17 @@ extern ssize_t vfio_pci_config_rw(struct vfio_pci_core_device *vdev, extern ssize_t vfio_pci_bar_rw(struct vfio_pci_core_device *vdev, char __user *buf, size_t count, loff_t *ppos, bool iswrite);

+#ifdef CONFIG_VFIO_PCI_VGA extern ssize_t vfio_pci_vga_rw(struct vfio_pci_core_device *vdev, char __user *buf, size_t count, loff_t *ppos, bool iswrite); +#else +static inline ssize_t vfio_pci_vga_rw(struct vfio_pci_core_device *vdev, + char __user *buf, size_t count, + loff_t *ppos, bool iswrite) +{ + return -EINVAL; +} +#endif

extern long vfio_pci_ioeventfd(struct vfio_pci_core_device *vdev, loff_t offset, uint64_t data, int count, int fd);

From: Damien Le Moal damien.lemoal@opensource.wdc.com

[ Upstream commit 7e6b7e740addcea450041b5be8e42f0a4ceece0f ]

The call to pm8001_ccb_task_free() at the end of pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.

Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.... Reviewed-by: Jack Wang jinpu.wang@ionos.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_hwi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 6332cf23bf6b..1b1860f305ef 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3717,12 +3717,11 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) mb();

if (pm8001_dev->id & NCQ_ABORT_ALL_FLAG) { - pm8001_tag_free(pm8001_ha, tag); sas_free_task(t); - /* clear the flag */ - pm8001_dev->id &= 0xBFFFFFFF; - } else + pm8001_dev->id &= ~NCQ_ABORT_ALL_FLAG; + } else { t->task_done(t); + }

return 0; }

From: Damien Le Moal damien.lemoal@opensource.wdc.com

[ Upstream commit 4c8f04b1905cd4b776d0b720463c091545478ef7 ]

In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails.

Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free().

Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.... Reviewed-by: John Garry john.garry@huawei.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_hwi.c | 9 +++++++++ drivers/scsi/pm8001/pm8001_sas.c | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 9 +++++++-- 3 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 7351e767b68d..e447b714df2b 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -4492,6 +4492,9 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, SAS_ADDR_SIZE); rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, sizeof(payload), 0); + if (rc) + pm8001_tag_free(pm8001_ha, tag); + return rc; }

@@ -4904,6 +4907,9 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha, ccb->ccb_tag = tag; rc = pm8001_chip_fw_flash_update_build(pm8001_ha, &flash_update_info, tag); + if (rc) + pm8001_tag_free(pm8001_ha, tag); + return rc; }

@@ -5008,6 +5014,9 @@ pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha, payload.nds = cpu_to_le32(state); rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, sizeof(payload), 0); + if (rc) + pm8001_tag_free(pm8001_ha, tag); + return rc;

} diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index c0b45b8a513d..2a9ea08c7fe6 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -831,10 +831,10 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,

res = PM8001_CHIP_DISP->task_abort(pm8001_ha, pm8001_dev, flag, task_tag, ccb_tag); - if (res) { del_timer(&task->slow_task->timer); pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n"); + pm8001_tag_free(pm8001_ha, ccb_tag); goto ex_err; } wait_for_completion(&task->slow_task->completion); diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 00498e3660e1..d7c88d0f1899 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -4928,8 +4928,13 @@ static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, payload.tag = cpu_to_le32(tag); payload.phyop_phyid = cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF)); - return pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, - sizeof(payload), 0); + + rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, + sizeof(payload), 0); + if (rc) + pm8001_tag_free(pm8001_ha, tag); + + return rc; }

static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)

From: Johan Almbladh johan.almbladh@anyfinetworks.com

[ Upstream commit 28225a6ef80ebf46c46e5fbd5b1ee231a0b2b5b7 ]

Before, the hardware would be allowed to transmit injected 802.11 MPDUs as A-MSDU. This resulted in corrupted frames being transmitted. Now, injected MPDUs are transmitted as-is, without A-MSDU.

The fix was verified with frame injection on MT7915 hardware, both with and without the injected frame being encrypted.

If the hardware cannot do A-MSDU aggregation on MPDUs, this problem would also be present in the TX path where mac80211 does the 802.11 encapsulation. However, I have not observed any such problem when disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode. Therefore this fix is isolated to injected frames only.

The same A-MSDU logic is also present in the mt7921 driver, so it is likely that this fix should be applied there too. I do not have access to mt7921 hardware so I have not been able to test that.

Signed-off-by: Johan Almbladh johan.almbladh@anyfinetworks.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c index a1da514ca256..d1a00cd47073 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c @@ -982,6 +982,7 @@ mt7915_mac_write_txwi_80211(struct mt7915_dev *dev, __le32 *txwi, val = MT_TXD3_SN_VALID | FIELD_PREP(MT_TXD3_SEQ, IEEE80211_SEQ_TO_SN(seqno)); txwi[3] |= cpu_to_le32(val); + txwi[7] &= ~cpu_to_le32(MT_TXD7_HW_AMSDU); }

val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |

From: Yang Li yang.lee@linux.alibaba.com

[ Upstream commit 9273ffcc9a11942bd586bb42584337ef3962b692 ]

Smatch reports the following: drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned variable 'def_th' drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned variable 'def_th'

Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Yang Li yang.lee@linux.alibaba.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index ed8f7bc18977..f8f3c1db488c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -1732,7 +1732,7 @@ mt7615_mac_adjust_sensitivity(struct mt7615_phy *phy, struct mt7615_dev *dev = phy->dev; int false_cca = ofdm ? phy->false_cca_ofdm : phy->false_cca_cck; bool ext_phy = phy != &dev->phy; - u16 def_th = ofdm ? -98 : -110; + s16 def_th = ofdm ? -98 : -110; bool update = false; s8 *sensitivity; int signal;

From: Qi Liu liuqi115@huawei.com

[ Upstream commit 554fb72ee34f4732c7f694f56c3c6e67790352a0 ]

If the driver probe fails to request the channel IRQ or fatal IRQ, the driver will free the IRQ vectors before freeing the IRQs in free_irq(), and this will cause a kernel BUG like this:

------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:369! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: free_msi_irqs+0x118/0x13c pci_disable_msi+0xfc/0x120 pci_free_irq_vectors+0x24/0x3c hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw] local_pci_probe+0x44/0xb0 work_for_cpu_fn+0x20/0x34 process_one_work+0x1d0/0x340 worker_thread+0x2e0/0x460 kthread+0x180/0x190 ret_from_fork+0x10/0x20 ---[ end trace b88990335b610c11 ]---

So we use devm_add_action() to control the order in which we free the vectors.

Link: https://lore.kernel.org/r/1645703489-87194-4-git-send-email-john.garry@huawe... Signed-off-by: Qi Liu liuqi115@huawei.com Signed-off-by: John Garry john.garry@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index b3bdbea3c955..8392463d57de 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2390,17 +2390,25 @@ static irqreturn_t cq_interrupt_v3_hw(int irq_no, void *p) return IRQ_WAKE_THREAD; }

+static void hisi_sas_v3_free_vectors(void *data) +{ + struct pci_dev *pdev = data; + + pci_free_irq_vectors(pdev); +} + static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba) { int vectors; int max_msi = HISI_SAS_MSI_COUNT_V3_HW, min_msi; struct Scsi_Host *shost = hisi_hba->shost; + struct pci_dev *pdev = hisi_hba->pci_dev; struct irq_affinity desc = { .pre_vectors = BASE_VECTORS_V3_HW, };

min_msi = MIN_AFFINE_VECTORS_V3_HW; - vectors = pci_alloc_irq_vectors_affinity(hisi_hba->pci_dev, + vectors = pci_alloc_irq_vectors_affinity(pdev, min_msi, max_msi, PCI_IRQ_MSI | PCI_IRQ_AFFINITY, @@ -2412,6 +2420,7 @@ static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba) hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW; shost->nr_hw_queues = hisi_hba->cq_nvecs;

+ devm_add_action(&pdev->dev, hisi_sas_v3_free_vectors, pdev); return 0; }

@@ -4763,7 +4772,7 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)

rc = scsi_add_host(shost, dev); if (rc) - goto err_out_free_irq_vectors; + goto err_out_debugfs;

rc = sas_register_ha(sha); if (rc) @@ -4792,8 +4801,6 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id) sas_unregister_ha(sha); err_out_register_ha: scsi_remove_host(shost); -err_out_free_irq_vectors: - pci_free_irq_vectors(pdev); err_out_debugfs: debugfs_exit_v3_hw(hisi_hba); err_out_ha: @@ -4817,7 +4824,6 @@ hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)

devm_free_irq(&pdev->dev, pci_irq_vector(pdev, nr), cq); } - pci_free_irq_vectors(pdev); }

static void hisi_sas_v3_remove(struct pci_dev *pdev)

From: Dust Li dust.li@linux.alibaba.com

[ Upstream commit 6bf536eb5c8ca011d1ff57b5c5f7c57ceac06a37 ]

rmbe_update_limit is used to limit announcing receive window updating too frequently. RFC7609 request a minimal increase in the window size of 10% of the receive buffer space. But current implementation used:

min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)

and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost always less then 10% of the receive buffer space.

This causes the receiver always sending CDC message to update its consumer cursor when it consumes more then 2K of data. And as a result, we may encounter something like "TCP silly window syndrome" when sending 2.5~8K message.

This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).

With this patch and SMC autocorking enabled, qperf 2K/4K/8K tcp_bw test shows 45%/75%/40% increase in throughput respectively.

Signed-off-by: Dust Li dust.li@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/smc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index d1cdc891c211..f1dc5b914771 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1904,7 +1904,7 @@ static struct smc_buf_desc *smc_buf_get_slot(int compressed_bufsize, */ static inline int smc_rmb_wnd_update_limit(int rmbe_size) { - return min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2); + return max_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2); }

/* map an rmb buf to a link */

From: Sven Eckelmann sven@narfation.org

[ Upstream commit a02192151b7dbf855084c38dca380d77c7658353 ]

Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. This fixes iproute2 which otherwise resolved the link interface to an interface in the wrong namespace.

Test commands:

ip netns add nst ip link add dummy0 type dummy ip link add link macvtap0 link dummy0 type macvtap ip link set macvtap0 netns nst ip -netns nst link show macvtap0

Before:

10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500 link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff

After:

10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500 link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0

Reported-by: Leonardo Mörlein freifunk@irrelefant.net Signed-off-by: Sven Eckelmann sven@narfation.org Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/macvtap.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 6b12902a803f..cecf8c63096c 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -133,11 +133,17 @@ static void macvtap_setup(struct net_device *dev) dev->tx_queue_len = TUN_READQ_SIZE; }

+static struct net *macvtap_link_net(const struct net_device *dev) +{ + return dev_net(macvlan_dev_real_dev(dev)); +} + static struct rtnl_link_ops macvtap_link_ops __read_mostly = { .kind = "macvtap", .setup = macvtap_setup, .newlink = macvtap_newlink, .dellink = macvtap_dellink, + .get_link_net = macvtap_link_net, .priv_size = sizeof(struct macvtap_dev), };

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

[ Upstream commit 9b392e0e0b6d026da5a62bb79a08f32e27af858e ]

This fixes attemting to print hdev->name directly which causes them to print an error:

kernel: read_version:367: (efault): sock 000000006a3008f2

Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/bluetooth/bluetooth.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index a1093994e5e4..720316467127 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -204,19 +204,21 @@ void bt_err_ratelimited(const char *fmt, ...); #define BT_DBG(fmt, ...) pr_debug(fmt "\n", ##__VA_ARGS__) #endif

+#define bt_dev_name(hdev) ((hdev) ? (hdev)->name : "null") + #define bt_dev_info(hdev, fmt, ...) \ - BT_INFO("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_INFO("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__) #define bt_dev_warn(hdev, fmt, ...) \ - BT_WARN("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_WARN("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__) #define bt_dev_err(hdev, fmt, ...) \ - BT_ERR("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_ERR("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__) #define bt_dev_dbg(hdev, fmt, ...) \ - BT_DBG("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_DBG("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)

#define bt_dev_warn_ratelimited(hdev, fmt, ...) \ - bt_warn_ratelimited("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + bt_warn_ratelimited("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__) #define bt_dev_err_ratelimited(hdev, fmt, ...) \ - bt_err_ratelimited("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + bt_err_ratelimited("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)

/* Connection and socket states */ enum {

From: Michael Chan michael.chan@broadcom.com

[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ]

If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds.

The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl.

Reviewed-by: Colin Winegarden colin.winegarden@broadcom.com Reviewed-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index f147ad5a6531..a47753a4498e 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2076,9 +2076,7 @@ static int bnxt_set_pauseparam(struct net_device *dev, }

link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL; - if (bp->hwrm_spec_code >= 0x10201) - link_info->req_flow_ctrl = - PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE; + link_info->req_flow_ctrl = 0; } else { /* when transition from auto pause to force pause, * force a link change

From: Alexander Lobakin alobakin@pm.me

[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]

With KCFLAGS="-O3", I was able to trigger a fortify-source memcpy() overflow panic on set_vi_srs_handler(). Although O3 level is not supported in the mainline, under some conditions that may've happened with any optimization settings, it's just a matter of inlining luck. The panic itself is correct, more precisely, 50/50 false-positive and not at the same time.

From the one side, no real overflow happens. Exception handler

defined in asm just gets copied to some reserved places in the memory. But the reason behind is that C code refers to that exception handler declares it as `char`, i.e. something of 1 byte length. It's obvious that the asm function itself is way more than 1 byte, so fortify logics thought we are going to past the symbol declared. The standard way to refer to asm symbols from C code which is not supposed to be called from C is to declare them as `extern const u8[]`. This is fully correct from any point of view, as any code itself is just a bunch of bytes (including 0 as it is for syms like _stext/_etext/etc.), and the exact size is not known at the moment of compilation. Adjust the type of the except_vec_vi_*() and related variables. Make set_handler() take `const` as a second argument to avoid cast-away warnings and give a little more room for optimization.

Signed-off-by: Alexander Lobakin alobakin@pm.me Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/include/asm/setup.h | 2 +- arch/mips/kernel/traps.c | 22 +++++++++++----------- 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h index bb36a400203d..8c56b862fd9c 100644 --- a/arch/mips/include/asm/setup.h +++ b/arch/mips/include/asm/setup.h @@ -16,7 +16,7 @@ static inline void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift, unsigned int timeout) {} #endif

-extern void set_handler(unsigned long offset, void *addr, unsigned long len); +void set_handler(unsigned long offset, const void *addr, unsigned long len); extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);

typedef void (*vi_handler_t)(void); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d26b0fb8ea06..b9b31b13062d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2091,19 +2091,19 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) * If no shadow set is selected then use the default handler * that does normal register saving and standard interrupt exit */ - extern char except_vec_vi, except_vec_vi_lui; - extern char except_vec_vi_ori, except_vec_vi_end; - extern char rollback_except_vec_vi; - char *vec_start = using_rollback_handler() ? - &rollback_except_vec_vi : &except_vec_vi; + extern const u8 except_vec_vi[], except_vec_vi_lui[]; + extern const u8 except_vec_vi_ori[], except_vec_vi_end[]; + extern const u8 rollback_except_vec_vi[]; + const u8 *vec_start = using_rollback_handler() ? + rollback_except_vec_vi : except_vec_vi; #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN) - const int lui_offset = &except_vec_vi_lui - vec_start + 2; - const int ori_offset = &except_vec_vi_ori - vec_start + 2; + const int lui_offset = except_vec_vi_lui - vec_start + 2; + const int ori_offset = except_vec_vi_ori - vec_start + 2; #else - const int lui_offset = &except_vec_vi_lui - vec_start; - const int ori_offset = &except_vec_vi_ori - vec_start; + const int lui_offset = except_vec_vi_lui - vec_start; + const int ori_offset = except_vec_vi_ori - vec_start; #endif - const int handler_len = &except_vec_vi_end - vec_start; + const int handler_len = except_vec_vi_end - vec_start;

if (handler_len > VECTORSPACING) { /* @@ -2311,7 +2311,7 @@ void per_cpu_trap_init(bool is_boot_cpu) }

/* Install CPU exception handler */ -void set_handler(unsigned long offset, void *addr, unsigned long size) +void set_handler(unsigned long offset, const void *addr, unsigned long size) { #ifdef CONFIG_CPU_MICROMIPS memcpy((void *)(ebase + offset), ((unsigned char *)addr - 1), size);

From: Hangyu Hua hbh25y@gmail.com

[ Upstream commit d601fd24e6964967f115f036a840f4f28488f63f ]

Refcount leak will happen when format_show returns failure in multiple cases. Unified management of of_node_put can fix this problem.

Signed-off-by: Hangyu Hua hbh25y@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20220302021959.10959-1-hbh25y@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/secvar-sysfs.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c index a0a78aba2083..1ee4640a2641 100644 --- a/arch/powerpc/kernel/secvar-sysfs.c +++ b/arch/powerpc/kernel/secvar-sysfs.c @@ -26,15 +26,18 @@ static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr, const char *format;

node = of_find_compatible_node(NULL, NULL, "ibm,secvar-backend"); - if (!of_device_is_available(node)) - return -ENODEV; + if (!of_device_is_available(node)) { + rc = -ENODEV; + goto out; + }

rc = of_property_read_string(node, "format", &format); if (rc) - return rc; + goto out;

rc = sprintf(buf, "%s\n", format);

+out: of_node_put(node);

return rc;

From: Oliver Hartkopp socketcan@hartkopp.net

[ Upstream commit 530e0d46c61314c59ecfdb8d3bcb87edbc0f85d3 ]

The N_As value describes the time a CAN frame needs on the wire when transmitted by the CAN controller. Even very short CAN FD frames need arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).

Having N_As to be zero (the former default) leads to 'no CAN frame separation' when STmin is set to zero by the receiving node. This 'burst mode' should not be enabled by default as it could potentially dump a high number of CAN frames into the netdev queue from the soft hrtimer context. This does not affect the system stability but is just not nice and cooperative.

With this N_As/frame_txtime value the 'burst mode' is disabled by default.

As user space applications usually do not set the frame_txtime element of struct can_isotp_options the new in-kernel default is very likely overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked. To make sure that a N_As value of zero is only set intentional the value '0' is now interpreted as 'do not change the current value'. When a frame_txtime of zero is required for testing purposes this CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.

Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- include/uapi/linux/can/isotp.h | 28 ++++++++++++++++++++++------ net/can/isotp.c | 12 +++++++++++- 2 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index c55935b64ccc..590f8aea2b6d 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -137,20 +137,16 @@ struct can_isotp_ll_options { #define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ #define CAN_ISOTP_SF_BROADCAST 0x800 /* 1-to-N functional addressing */

-/* default values */ +/* protocol machine default values */

#define CAN_ISOTP_DEFAULT_FLAGS 0 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00 #define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */ -#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000 /* 50 micro seconds */ #define CAN_ISOTP_DEFAULT_RECV_BS 0 #define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0

-#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU -#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN -#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 - /* * Remark on CAN_ISOTP_DEFAULT_RECV_* values: * @@ -162,4 +158,24 @@ struct can_isotp_ll_options { * consistency and copied directly into the flow control (FC) frame. */

+/* link layer default values => make use of Classical CAN frames */ + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* + * The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as + * it only makes sense for isotp implementation tests to run without + * a N_As value. As user space applications usually do not set the + * frame_txtime element of struct can_isotp_options the new in-kernel + * default is very likely overwritten with zero when the sockopt() + * CAN_ISOTP_OPTS is invoked. + * To make sure that a N_As value of zero is only set intentional the + * value '0' is now interpreted as 'do not change the current value'. + * When a frame_txtime of zero is required for testing purposes this + * CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime. + */ +#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF + #endif /* !_UAPI_CAN_ISOTP_H */ diff --git a/net/can/isotp.c b/net/can/isotp.c index a95d171b3a64..5bce7c66c121 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -141,6 +141,7 @@ struct isotp_sock { struct can_isotp_options opt; struct can_isotp_fc_options rxfc, txfc; struct can_isotp_ll_options ll; + u32 frame_txtime; u32 force_tx_stmin; u32 force_rx_stmin; struct tpcon rx, tx; @@ -360,7 +361,7 @@ static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae)

so->tx_gap = ktime_set(0, 0); /* add transmission time for CAN frame N_As */ - so->tx_gap = ktime_add_ns(so->tx_gap, so->opt.frame_txtime); + so->tx_gap = ktime_add_ns(so->tx_gap, so->frame_txtime); /* add waiting time for consecutive frames N_Cs */ if (so->opt.flags & CAN_ISOTP_FORCE_TXSTMIN) so->tx_gap = ktime_add_ns(so->tx_gap, @@ -1247,6 +1248,14 @@ static int isotp_setsockopt_locked(struct socket *sock, int level, int optname, /* no separate rx_ext_address is given => use ext_address */ if (!(so->opt.flags & CAN_ISOTP_RX_EXT_ADDR)) so->opt.rx_ext_address = so->opt.ext_address; + + /* check for frame_txtime changes (0 => no changes) */ + if (so->opt.frame_txtime) { + if (so->opt.frame_txtime == CAN_ISOTP_FRAME_TXTIME_ZERO) + so->frame_txtime = 0; + else + so->frame_txtime = so->opt.frame_txtime; + } break;

case CAN_ISOTP_RECV_FC: @@ -1448,6 +1457,7 @@ static int isotp_init(struct sock *sk) so->opt.rxpad_content = CAN_ISOTP_DEFAULT_PAD_CONTENT; so->opt.txpad_content = CAN_ISOTP_DEFAULT_PAD_CONTENT; so->opt.frame_txtime = CAN_ISOTP_DEFAULT_FRAME_TXTIME; + so->frame_txtime = CAN_ISOTP_DEFAULT_FRAME_TXTIME; so->rxfc.bs = CAN_ISOTP_DEFAULT_RECV_BS; so->rxfc.stmin = CAN_ISOTP_DEFAULT_RECV_STMIN; so->rxfc.wftmax = CAN_ISOTP_DEFAULT_RECV_WFTMAX;

From: Michael T. Kloos michael@michaelkloos.com

[ Upstream commit 9d1f0ec9f71780e69ceb9d91697600c747d6e02e ]

Rewrote the RISC-V memmove() assembly implementation. The previous implementation did not check memory alignment and it compared 2 pointers with a signed comparison. The misaligned memory access would cause the kernel to crash on systems that did not emulate it in firmware and did not support it in hardware. Firmware emulation is slow and may not exist. The RISC-V spec does not guarantee that support for misaligned memory accesses will exist. It should not be depended on.

This patch now checks for XLEN granularity of co-alignment between the pointers. Failing that, copying is done by loading from the 2 contiguous and naturally aligned XLEN memory locations containing the overlapping XLEN sized data to be copied. The data is shifted into the correct place and binary or'ed together on each iteration. The result is then stored into the corresponding naturally aligned XLEN sized location in the destination. For unaligned data at the terminations of the regions to be copied or for copies less than (2 * XLEN) in size, byte copy is used.

This patch also now uses unsigned comparison for the pointers and migrates to the newer assembler annotations from the now deprecated ones.

Signed-off-by: Michael T. Kloos michael@michaelkloos.com Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/lib/memmove.S | 368 +++++++++++++++++++++++++++++++++------ 1 file changed, 310 insertions(+), 58 deletions(-)

diff --git a/arch/riscv/lib/memmove.S b/arch/riscv/lib/memmove.S index 07d1d2152ba5..e0609e1f0864 100644 --- a/arch/riscv/lib/memmove.S +++ b/arch/riscv/lib/memmove.S @@ -1,64 +1,316 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022 Michael T. Kloos michael@michaelkloos.com + */

#include <linux/linkage.h> #include <asm/asm.h>

-ENTRY(__memmove) -WEAK(memmove) - move t0, a0 - move t1, a1 - - beq a0, a1, exit_memcpy - beqz a2, exit_memcpy - srli t2, a2, 0x2 - - slt t3, a0, a1 - beqz t3, do_reverse - - andi a2, a2, 0x3 - li t4, 1 - beqz t2, byte_copy - -word_copy: - lw t3, 0(a1) - addi t2, t2, -1 - addi a1, a1, 4 - sw t3, 0(a0) - addi a0, a0, 4 - bnez t2, word_copy - beqz a2, exit_memcpy - j byte_copy - -do_reverse: - add a0, a0, a2 - add a1, a1, a2 - andi a2, a2, 0x3 - li t4, -1 - beqz t2, reverse_byte_copy - -reverse_word_copy: - addi a1, a1, -4 - addi t2, t2, -1 - lw t3, 0(a1) - addi a0, a0, -4 - sw t3, 0(a0) - bnez t2, reverse_word_copy - beqz a2, exit_memcpy - -reverse_byte_copy: - addi a0, a0, -1 - addi a1, a1, -1 +SYM_FUNC_START(__memmove) +SYM_FUNC_START_WEAK(memmove) + /* + * Returns + * a0 - dest + * + * Parameters + * a0 - Inclusive first byte of dest + * a1 - Inclusive first byte of src + * a2 - Length of copy n + * + * Because the return matches the parameter register a0, + * we will not clobber or modify that register. + * + * Note: This currently only works on little-endian. + * To port to big-endian, reverse the direction of shifts + * in the 2 misaligned fixup copy loops. + */

+ /* Return if nothing to do */ + beq a0, a1, return_from_memmove + beqz a2, return_from_memmove + + /* + * Register Uses + * Forward Copy: a1 - Index counter of src + * Reverse Copy: a4 - Index counter of src + * Forward Copy: t3 - Index counter of dest + * Reverse Copy: t4 - Index counter of dest + * Both Copy Modes: t5 - Inclusive first multibyte/aligned of dest + * Both Copy Modes: t6 - Non-Inclusive last multibyte/aligned of dest + * Both Copy Modes: t0 - Link / Temporary for load-store + * Both Copy Modes: t1 - Temporary for load-store + * Both Copy Modes: t2 - Temporary for load-store + * Both Copy Modes: a5 - dest to src alignment offset + * Both Copy Modes: a6 - Shift ammount + * Both Copy Modes: a7 - Inverse Shift ammount + * Both Copy Modes: a2 - Alternate breakpoint for unrolled loops + */ + + /* + * Solve for some register values now. + * Byte copy does not need t5 or t6. + */ + mv t3, a0 + add t4, a0, a2 + add a4, a1, a2 + + /* + * Byte copy if copying less than (2 * SZREG) bytes. This can + * cause problems with the bulk copy implementation and is + * small enough not to bother. + */ + andi t0, a2, -(2 * SZREG) + beqz t0, byte_copy + + /* + * Now solve for t5 and t6. + */ + andi t5, t3, -SZREG + andi t6, t4, -SZREG + /* + * If dest(Register t3) rounded down to the nearest naturally + * aligned SZREG address, does not equal dest, then add SZREG + * to find the low-bound of SZREG alignment in the dest memory + * region. Note that this could overshoot the dest memory + * region if n is less than SZREG. This is one reason why + * we always byte copy if n is less than SZREG. + * Otherwise, dest is already naturally aligned to SZREG. + */ + beq t5, t3, 1f + addi t5, t5, SZREG + 1: + + /* + * If the dest and src are co-aligned to SZREG, then there is + * no need for the full rigmarole of a full misaligned fixup copy. + * Instead, do a simpler co-aligned copy. + */ + xor t0, a0, a1 + andi t1, t0, (SZREG - 1) + beqz t1, coaligned_copy + /* Fall through to misaligned fixup copy */ + +misaligned_fixup_copy: + bltu a1, a0, misaligned_fixup_copy_reverse + +misaligned_fixup_copy_forward: + jal t0, byte_copy_until_aligned_forward + + andi a5, a1, (SZREG - 1) /* Find the alignment offset of src (a1) */ + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */ + sub a5, a1, t3 /* Find the difference between src and dest */ + andi a1, a1, -SZREG /* Align the src pointer */ + addi a2, t6, SZREG /* The other breakpoint for the unrolled loop*/ + + /* + * Compute The Inverse Shift + * a7 = XLEN - a6 = XLEN + -a6 + * 2s complement negation to find the negative: -a6 = ~a6 + 1 + * Add that to XLEN. XLEN = SZREG * 8. + */ + not a7, a6 + addi a7, a7, (SZREG * 8 + 1) + + /* + * Fix Misalignment Copy Loop - Forward + * load_val0 = load_ptr[0]; + * do { + * load_val1 = load_ptr[1]; + * store_ptr += 2; + * store_ptr[0 - 2] = (load_val0 >> {a6}) | (load_val1 << {a7}); + * + * if (store_ptr == {a2}) + * break; + * + * load_val0 = load_ptr[2]; + * load_ptr += 2; + * store_ptr[1 - 2] = (load_val1 >> {a6}) | (load_val0 << {a7}); + * + * } while (store_ptr != store_ptr_end); + * store_ptr = store_ptr_end; + */ + + REG_L t0, (0 * SZREG)(a1) + 1: + REG_L t1, (1 * SZREG)(a1) + addi t3, t3, (2 * SZREG) + srl t0, t0, a6 + sll t2, t1, a7 + or t2, t0, t2 + REG_S t2, ((0 * SZREG) - (2 * SZREG))(t3) + + beq t3, a2, 2f + + REG_L t0, (2 * SZREG)(a1) + addi a1, a1, (2 * SZREG) + srl t1, t1, a6 + sll t2, t0, a7 + or t2, t1, t2 + REG_S t2, ((1 * SZREG) - (2 * SZREG))(t3) + + bne t3, t6, 1b + 2: + mv t3, t6 /* Fix the dest pointer in case the loop was broken */ + + add a1, t3, a5 /* Restore the src pointer */ + j byte_copy_forward /* Copy any remaining bytes */ + +misaligned_fixup_copy_reverse: + jal t0, byte_copy_until_aligned_reverse + + andi a5, a4, (SZREG - 1) /* Find the alignment offset of src (a4) */ + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */ + sub a5, a4, t4 /* Find the difference between src and dest */ + andi a4, a4, -SZREG /* Align the src pointer */ + addi a2, t5, -SZREG /* The other breakpoint for the unrolled loop*/ + + /* + * Compute The Inverse Shift + * a7 = XLEN - a6 = XLEN + -a6 + * 2s complement negation to find the negative: -a6 = ~a6 + 1 + * Add that to XLEN. XLEN = SZREG * 8. + */ + not a7, a6 + addi a7, a7, (SZREG * 8 + 1) + + /* + * Fix Misalignment Copy Loop - Reverse + * load_val1 = load_ptr[0]; + * do { + * load_val0 = load_ptr[-1]; + * store_ptr -= 2; + * store_ptr[1] = (load_val0 >> {a6}) | (load_val1 << {a7}); + * + * if (store_ptr == {a2}) + * break; + * + * load_val1 = load_ptr[-2]; + * load_ptr -= 2; + * store_ptr[0] = (load_val1 >> {a6}) | (load_val0 << {a7}); + * + * } while (store_ptr != store_ptr_end); + * store_ptr = store_ptr_end; + */ + + REG_L t1, ( 0 * SZREG)(a4) + 1: + REG_L t0, (-1 * SZREG)(a4) + addi t4, t4, (-2 * SZREG) + sll t1, t1, a7 + srl t2, t0, a6 + or t2, t1, t2 + REG_S t2, ( 1 * SZREG)(t4) + + beq t4, a2, 2f + + REG_L t1, (-2 * SZREG)(a4) + addi a4, a4, (-2 * SZREG) + sll t0, t0, a7 + srl t2, t1, a6 + or t2, t0, t2 + REG_S t2, ( 0 * SZREG)(t4) + + bne t4, t5, 1b + 2: + mv t4, t5 /* Fix the dest pointer in case the loop was broken */ + + add a4, t4, a5 /* Restore the src pointer */ + j byte_copy_reverse /* Copy any remaining bytes */ + +/* + * Simple copy loops for SZREG co-aligned memory locations. + * These also make calls to do byte copies for any unaligned + * data at their terminations. + */ +coaligned_copy: + bltu a1, a0, coaligned_copy_reverse + +coaligned_copy_forward: + jal t0, byte_copy_until_aligned_forward + + 1: + REG_L t1, ( 0 * SZREG)(a1) + addi a1, a1, SZREG + addi t3, t3, SZREG + REG_S t1, (-1 * SZREG)(t3) + bne t3, t6, 1b + + j byte_copy_forward /* Copy any remaining bytes */ + +coaligned_copy_reverse: + jal t0, byte_copy_until_aligned_reverse + + 1: + REG_L t1, (-1 * SZREG)(a4) + addi a4, a4, -SZREG + addi t4, t4, -SZREG + REG_S t1, ( 0 * SZREG)(t4) + bne t4, t5, 1b + + j byte_copy_reverse /* Copy any remaining bytes */ + +/* + * These are basically sub-functions within the function. They + * are used to byte copy until the dest pointer is in alignment. + * At which point, a bulk copy method can be used by the + * calling code. These work on the same registers as the bulk + * copy loops. Therefore, the register values can be picked + * up from where they were left and we avoid code duplication + * without any overhead except the call in and return jumps. + */ +byte_copy_until_aligned_forward: + beq t3, t5, 2f + 1: + lb t1, 0(a1) + addi a1, a1, 1 + addi t3, t3, 1 + sb t1, -1(t3) + bne t3, t5, 1b + 2: + jalr zero, 0x0(t0) /* Return to multibyte copy loop */ + +byte_copy_until_aligned_reverse: + beq t4, t6, 2f + 1: + lb t1, -1(a4) + addi a4, a4, -1 + addi t4, t4, -1 + sb t1, 0(t4) + bne t4, t6, 1b + 2: + jalr zero, 0x0(t0) /* Return to multibyte copy loop */ + +/* + * Simple byte copy loops. + * These will byte copy until they reach the end of data to copy. + * At that point, they will call to return from memmove. + */ byte_copy: - lb t3, 0(a1) - addi a2, a2, -1 - sb t3, 0(a0) - add a1, a1, t4 - add a0, a0, t4 - bnez a2, byte_copy - -exit_memcpy: - move a0, t0 - move a1, t1 - ret -END(__memmove) + bltu a1, a0, byte_copy_reverse + +byte_copy_forward: + beq t3, t4, 2f + 1: + lb t1, 0(a1) + addi a1, a1, 1 + addi t3, t3, 1 + sb t1, -1(t3) + bne t3, t4, 1b + 2: + ret + +byte_copy_reverse: + beq t4, t3, 2f + 1: + lb t1, -1(a4) + addi a4, a4, -1 + addi t4, t4, -1 + sb t1, 0(t4) + bne t4, t3, 1b + 2: + +return_from_memmove: + ret + +SYM_FUNC_END(memmove) +SYM_FUNC_END(__memmove)

From: Jakub Kicinski kuba@kernel.org

[ Upstream commit 5d26cff5bdbebdf98ba48217c078ff102536f134 ]

George reports that altnames can eat up kernel memory. We should charge that memory appropriately.

Reported-by: George Shuklin george.shuklin@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 8b5c5703d758..6a7883ec0489 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -3637,7 +3637,7 @@ static int rtnl_alt_ifname(int cmd, struct net_device *dev, struct nlattr *attr, if (err) return err;

- alt_ifname = nla_strdup(attr, GFP_KERNEL); + alt_ifname = nla_strdup(attr, GFP_KERNEL_ACCOUNT); if (!alt_ifname) return -ENOMEM;

From: Gal Pressman gal@nvidia.com

[ Upstream commit 970adfb76095fa719778d70a6b86030d2feb88dd ]

Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query (get_module_eeprom_by_page) the driver should not try to validate the query parameters, but just perform the read requested by the userspace.

Recent discussion in the mailing list: https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0...

Signed-off-by: Gal Pressman gal@nvidia.com Reviewed-by: Ido Schimmel idosch@nvidia.com Reviewed-by: Maxim Mikityanskiy maximmi@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/mellanox/mlx5/core/port.c | 23 ------------------- 1 file changed, 23 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 7b16a1188aab..fd79860de723 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -433,35 +433,12 @@ int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev, struct mlx5_module_eeprom_query_params *params, u8 *data) { - u8 module_id; int err;

err = mlx5_query_module_num(dev, &params->module_number); if (err) return err;

- err = mlx5_query_module_id(dev, params->module_number, &module_id); - if (err) - return err; - - switch (module_id) { - case MLX5_MODULE_ID_SFP: - if (params->page > 0) - return -EINVAL; - break; - case MLX5_MODULE_ID_QSFP: - case MLX5_MODULE_ID_QSFP28: - case MLX5_MODULE_ID_QSFP_PLUS: - if (params->page > 3) - return -EINVAL; - break; - case MLX5_MODULE_ID_DSFP: - break; - default: - mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id); - return -EINVAL; - } - if (params->i2c_address != MLX5_I2C_ADDR_HIGH && params->i2c_address != MLX5_I2C_ADDR_LOW) { mlx5_core_err(dev, "I2C address not recognized: 0x%x\n", params->i2c_address);

From: Jorge Lopez jorge.lopez2@hp.com

[ Upstream commit be9d73e64957bbd31ee9a0d11adc0f720974c558 ]

Several WMI queries leverage hp_wmi_read_int function to read their data. hp_wmi_read_int function was corrected in a previous patch. Now, this function invokes hp_wmi_perform_query with input parameter of size zero and the output buffer of size 4.

WMI commands calling hp_wmi_perform_query with input buffer size value of zero are listed below.

HPWMI_DISPLAY_QUERY HPWMI_HDDTEMP_QUERY HPWMI_ALS_QUERY HPWMI_HARDWARE_QUERY HPWMI_WIRELESS_QUERY HPWMI_BIOS_QUERY HPWMI_FEATURE_QUERY HPWMI_HOTKEY_QUERY HPWMI_FEATURE2_QUERY HPWMI_WIRELESS2_QUERY HPWMI_POSTCODEERROR_QUERY HPWMI_THERMAL_PROFILE_QUERY HPWMI_FAN_SPEED_MAX_GET_QUERY

Invoking those WMI commands with an input buffer size greater than zero will cause error 0x05 to be returned.

All WMI commands executed by the driver were reviewed and changes were made to ensure the expected input and output buffer size match the WMI specification.

Changes were validated on a HP ZBook Workstation notebook, HP EliteBook x360, and HP EliteBook 850 G8. Additional validation was included in the test process to ensure no other commands were incorrectly handled.

Signed-off-by: Jorge Lopez jorge.lopez2@hp.com Link: https://lore.kernel.org/r/20220310210853.28367-4-jorge.lopez2@hp.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/hp-wmi.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index f822ef6eb93c..88f0bfd6ecf1 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -330,7 +330,7 @@ static int hp_wmi_get_fan_speed(int fan) char fan_data[4] = { fan, 0, 0, 0 };

int ret = hp_wmi_perform_query(HPWMI_FAN_SPEED_GET_QUERY, HPWMI_GM, - &fan_data, sizeof(fan_data), + &fan_data, sizeof(char), sizeof(fan_data));

if (ret != 0) @@ -399,7 +399,7 @@ static int omen_thermal_profile_set(int mode) return -EINVAL;

ret = hp_wmi_perform_query(HPWMI_SET_PERFORMANCE_MODE, HPWMI_GM, - &buffer, sizeof(buffer), sizeof(buffer)); + &buffer, sizeof(buffer), 0);

if (ret) return ret < 0 ? ret : -EINVAL; @@ -436,7 +436,7 @@ static int hp_wmi_fan_speed_max_set(int enabled) int ret;

ret = hp_wmi_perform_query(HPWMI_FAN_SPEED_MAX_SET_QUERY, HPWMI_GM, - &enabled, sizeof(enabled), sizeof(enabled)); + &enabled, sizeof(enabled), 0);

if (ret) return ret < 0 ? ret : -EINVAL; @@ -449,7 +449,7 @@ static int hp_wmi_fan_speed_max_get(void) int val = 0, ret;

ret = hp_wmi_perform_query(HPWMI_FAN_SPEED_MAX_GET_QUERY, HPWMI_GM, - &val, sizeof(val), sizeof(val)); + &val, 0, sizeof(val));

if (ret) return ret < 0 ? ret : -EINVAL; @@ -461,7 +461,7 @@ static int __init hp_wmi_bios_2008_later(void) { int state = 0; int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, HPWMI_READ, &state, - sizeof(state), sizeof(state)); + 0, sizeof(state)); if (!ret) return 1;

@@ -472,7 +472,7 @@ static int __init hp_wmi_bios_2009_later(void) { u8 state[128]; int ret = hp_wmi_perform_query(HPWMI_FEATURE2_QUERY, HPWMI_READ, &state, - sizeof(state), sizeof(state)); + 0, sizeof(state)); if (!ret) return 1;

@@ -550,7 +550,7 @@ static int hp_wmi_rfkill2_refresh(void) int err, i;

err = hp_wmi_perform_query(HPWMI_WIRELESS2_QUERY, HPWMI_READ, &state, - sizeof(state), sizeof(state)); + 0, sizeof(state)); if (err) return err;

@@ -639,7 +639,7 @@ static ssize_t als_store(struct device *dev, struct device_attribute *attr, return ret;

ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, HPWMI_WRITE, &tmp, - sizeof(tmp), sizeof(tmp)); + sizeof(tmp), 0); if (ret) return ret < 0 ? ret : -EINVAL;

@@ -660,9 +660,9 @@ static ssize_t postcode_store(struct device *dev, struct device_attribute *attr, if (clear == false) return -EINVAL;

- /* Clear the POST error code. It is kept until until cleared. */ + /* Clear the POST error code. It is kept until cleared. */ ret = hp_wmi_perform_query(HPWMI_POSTCODEERROR_QUERY, HPWMI_WRITE, &tmp, - sizeof(tmp), sizeof(tmp)); + sizeof(tmp), 0); if (ret) return ret < 0 ? ret : -EINVAL;

@@ -952,7 +952,7 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device) int err, i;

err = hp_wmi_perform_query(HPWMI_WIRELESS2_QUERY, HPWMI_READ, &state, - sizeof(state), sizeof(state)); + 0, sizeof(state)); if (err) return err < 0 ? err : -EINVAL;

From: H. Nikolaus Schaller hns@goldelico.com

[ Upstream commit ac01df343e5a6c6bcead2ed421af1fde30f73e7e ]

Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled.

Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox() during probe leads to:

[ 10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164 [ 10.351919] unbalanced disables for smps10_out1 [ 10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4 [ 10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139 [ 10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 10.411455] unwind_backtrace from show_stack+0x10/0x14 [ 10.416970] show_stack from dump_stack_lvl+0x40/0x4c [ 10.422313] dump_stack_lvl from __warn+0xb8/0x170 [ 10.427377] __warn from warn_slowpath_fmt+0x70/0x9c [ 10.432595] warn_slowpath_fmt from _regulator_disable+0x40/0x164 [ 10.439037] _regulator_disable from regulator_disable+0x30/0x64 [ 10.445382] regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap] [ 10.453116] dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap] [ 10.467021] dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8 [ 10.481762] platform_probe from really_probe+0x168/0x2fc [ 10.481782] really_probe from __driver_probe_device+0xc4/0xd8 [ 10.481782] __driver_probe_device from driver_probe_device+0x24/0xa4 [ 10.503762] driver_probe_device from __driver_attach+0xc4/0xd8 [ 10.510018] __driver_attach from bus_for_each_dev+0x64/0xa0 [ 10.516001] bus_for_each_dev from bus_add_driver+0x148/0x1a4 [ 10.524880] bus_add_driver from driver_register+0xb4/0xf8 [ 10.530678] driver_register from do_one_initcall+0x90/0x1c4 [ 10.536661] do_one_initcall from do_init_module+0x4c/0x200 [ 10.536683] do_init_module from load_module+0x13dc/0x1910 [ 10.551159] load_module from sys_finit_module+0xc8/0xd8 [ 10.561319] sys_finit_module from __sys_trace_return+0x0/0x18 [ 10.561336] Exception stack(0xc344bfa8 to 0xc344bff0) [ 10.561341] bfa0: b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398 [ 10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778 [ 10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2 [ 10.601345] ---[ end trace 0000000000000000 ]---

Fix this unnecessary warning by checking if the regulator is enabled.

Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Link: https://lore.kernel.org/r/af3b750dc2265d875deaabcf5f80098c9645da45.164674461... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/dwc3-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index e196673f5c64..efaf0db595f4 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -242,7 +242,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, break;

case OMAP_DWC3_ID_FLOAT: - if (omap->vbus_reg) + if (omap->vbus_reg && regulator_is_enabled(omap->vbus_reg)) regulator_disable(omap->vbus_reg); val = dwc3_omap_read_utmi_ctrl(omap); val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;

From: Max Filippov jcmvbkbc@gmail.com

[ Upstream commit e85d29ba4b24f68e7a78cb85c55e754362eeb2de ]

DTC issues the following warnings when building xtfpga device trees:

/soc/flash@00000000/partition@0x0: unit name should not have leading "0x" /soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x" /soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x" /soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"

Drop leading 0x from flash partition unit names.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi | 8 ++++---- arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi | 8 ++++---- arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi index 9bf8bad1dd18..c33932568aa7 100644 --- a/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi +++ b/arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi @@ -8,19 +8,19 @@ reg = <0x00000000 0x08000000>; bank-width = <2>; device-width = <2>; - partition@0x0 { + partition@0 { label = "data"; reg = <0x00000000 0x06000000>; }; - partition@0x6000000 { + partition@6000000 { label = "boot loader area"; reg = <0x06000000 0x00800000>; }; - partition@0x6800000 { + partition@6800000 { label = "kernel image"; reg = <0x06800000 0x017e0000>; }; - partition@0x7fe0000 { + partition@7fe0000 { label = "boot environment"; reg = <0x07fe0000 0x00020000>; }; diff --git a/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi index 40c2f81f7cb6..7bde2ab2d6fb 100644 --- a/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi +++ b/arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi @@ -8,19 +8,19 @@ reg = <0x08000000 0x01000000>; bank-width = <2>; device-width = <2>; - partition@0x0 { + partition@0 { label = "boot loader area"; reg = <0x00000000 0x00400000>; }; - partition@0x400000 { + partition@400000 { label = "kernel image"; reg = <0x00400000 0x00600000>; }; - partition@0xa00000 { + partition@a00000 { label = "data"; reg = <0x00a00000 0x005e0000>; }; - partition@0xfe0000 { + partition@fe0000 { label = "boot environment"; reg = <0x00fe0000 0x00020000>; }; diff --git a/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi b/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi index fb8d3a9f33c2..0655b868749a 100644 --- a/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi +++ b/arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi @@ -8,11 +8,11 @@ reg = <0x08000000 0x00400000>; bank-width = <2>; device-width = <2>; - partition@0x0 { + partition@0 { label = "boot loader area"; reg = <0x00000000 0x003f0000>; }; - partition@0x3f0000 { + partition@3f0000 { label = "boot environment"; reg = <0x003f0000 0x00010000>; };

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

[ Upstream commit f63d24baff787e13b723d86fe036f84bdbc35045 ]

This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm:

================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142

CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0

Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30

Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ================================================================== ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Reported-by: Sönke Huster soenke.huster@eknoes.de Tested-by: Sönke Huster soenke.huster@eknoes.de Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_event.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 816a0f6823a3..e06802d31469 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -5203,8 +5203,9 @@ static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev, hci_dev_lock(hdev);

hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle); - if (hcon) { + if (hcon && hcon->type == AMP_LINK) { hcon->state = BT_CLOSED; + hci_disconn_cfm(hcon, ev->reason); hci_conn_del(hcon); }

From: Wang Yufen wangyufen@huawei.com

[ Upstream commit f22881de730ebd472e15bcc2c0d1d46e36a87b9c ]

In calipso_map_cat_ntoh(), in the for loop, if the return value of netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses of bitmap[byte_offset] occurs.

The bug was found during fuzzing. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252

CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x21c/0x230 show_stack+0x1c/0x60 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0x70/0x2d0 __kasan_report+0x158/0x16c kasan_report+0x74/0x120 __asan_load1+0x80/0xa0 netlbl_bitmap_walk+0x3c/0xd0 calipso_opt_getattr+0x1a8/0x230 calipso_sock_getattr+0x218/0x340 calipso_sock_getattr+0x44/0x60 netlbl_sock_getattr+0x44/0x80 selinux_netlbl_socket_setsockopt+0x138/0x170 selinux_socket_setsockopt+0x4c/0x60 security_socket_setsockopt+0x4c/0x90 __sys_setsockopt+0xbc/0x2b0 __arm64_sys_setsockopt+0x6c/0x84 invoke_syscall+0x64/0x190 el0_svc_common.constprop.0+0x88/0x200 do_el0_svc+0x88/0xa0 el0_svc+0x128/0x1b0 el0t_64_sync_handler+0x9c/0x120 el0t_64_sync+0x16c/0x170

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Wang Yufen wangyufen@huawei.com Acked-by: Paul Moore paul@paul-moore.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/netlabel/netlabel_kapi.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index beb0e573266d..54c083003947 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -885,6 +885,8 @@ int netlbl_bitmap_walk(const unsigned char *bitmap, u32 bitmap_len, unsigned char bitmask; unsigned char byte;

+ if (offset >= bitmap_len) + return -1; byte_offset = offset / 8; byte = bitmap[byte_offset]; bit_spot = offset;

From: Xiubo Li xiubli@redhat.com

[ Upstream commit f639d9867eea647005dc824e0e24f39ffc50d4e4 ]

Reset the last_readdir at the same time, and add a comment explaining why we don't free last_readdir when dir_emit returns false.

Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/dir.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index 133dbd9338e7..d91fa53e12b3 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -478,8 +478,11 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx) 2 : (fpos_off(rde->offset) + 1); err = note_last_dentry(dfi, rde->name, rde->name_len, next_offset); - if (err) + if (err) { + ceph_mdsc_put_request(dfi->last_readdir); + dfi->last_readdir = NULL; return err; + } } else if (req->r_reply_info.dir_end) { dfi->next_offset = 2; /* keep last name */ @@ -520,6 +523,12 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx) if (!dir_emit(ctx, rde->name, rde->name_len, ceph_present_ino(inode->i_sb, le64_to_cpu(rde->inode.in->ino)), le32_to_cpu(rde->inode.in->mode) >> 12)) { + /* + * NOTE: Here no need to put the 'dfi->last_readdir', + * because when dir_emit stops us it's most likely + * doesn't have enough memory, etc. So for next readdir + * it will continue. + */ dout("filldir stopping us...\n"); return 0; }

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit f9a40b0890658330c83c95511f9d6b396610defc ]

initcall_blacklist() should return 1 to indicate that it handled its cmdline arguments.

set_debug_rodata() should return 1 to indicate that it handled its cmdline arguments. Print a warning if the option string is invalid.

This prevents these strings from being added to the 'init' program's environment as they are not init arguments/parameters.

Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: Igor Zhbanov i.zhbanov@omprussia.ru Cc: Ingo Molnar mingo@kernel.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- init/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/init/main.c b/init/main.c index cb68bc48a682..792a8d9cc560 100644 --- a/init/main.c +++ b/init/main.c @@ -1189,7 +1189,7 @@ static int __init initcall_blacklist(char *str) } } while (str_entry);

- return 0; + return 1; }

static bool __init_or_module initcall_blacklisted(initcall_t fn) @@ -1451,7 +1451,9 @@ static noinline void __init kernel_init_freeable(void); bool rodata_enabled __ro_after_init = true; static int __init set_debug_rodata(char *str) { - return strtobool(str, &rodata_enabled); + if (strtobool(str, &rodata_enabled)) + pr_warn("Invalid option string for rodata: '%s'\n", str); + return 1; } __setup("rodata=", set_debug_rodata); #endif

From: Adam Wujek dev_public@wujek.eu

[ Upstream commit 2a8b539433e111c4de364237627ef219d2f6350a ]

SI5341_OUT_CFG_RDIV_FORCE2 shall be checked first to distinguish whether a divider for a given output is set to 2 (SI5341_OUT_CFG_RDIV_FORCE2 is set) or the output is disabled (SI5341_OUT_CFG_RDIV_FORCE2 not set, SI5341_OUT_R_REG is set 0). Before the change, divider set to 2 (SI5341_OUT_R_REG set to 0) was interpreted as output is disabled.

Signed-off-by: Adam Wujek dev_public@wujek.eu Link: https://lore.kernel.org/r/20211203141125.2447520-1-dev_public@wujek.eu Reviewed-by: Robert Hancock robert.hancock@calian.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/clk-si5341.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c index f7b41366666e..4de098b6b0d4 100644 --- a/drivers/clk/clk-si5341.c +++ b/drivers/clk/clk-si5341.c @@ -798,6 +798,15 @@ static unsigned long si5341_output_clk_recalc_rate(struct clk_hw *hw, u32 r_divider; u8 r[3];

+ err = regmap_read(output->data->regmap, + SI5341_OUT_CONFIG(output), &val); + if (err < 0) + return err; + + /* If SI5341_OUT_CFG_RDIV_FORCE2 is set, r_divider is 2 */ + if (val & SI5341_OUT_CFG_RDIV_FORCE2) + return parent_rate / 2; + err = regmap_bulk_read(output->data->regmap, SI5341_OUT_R_REG(output), r, 3); if (err < 0) @@ -814,13 +823,6 @@ static unsigned long si5341_output_clk_recalc_rate(struct clk_hw *hw, r_divider += 1; r_divider <<= 1;

- err = regmap_read(output->data->regmap, - SI5341_OUT_CONFIG(output), &val); - if (err < 0) - return err; - - if (val & SI5341_OUT_CFG_RDIV_FORCE2) - r_divider = 2;

return parent_rate / r_divider; }

From: Stefan Wahren stefan.wahren@i2se.com

[ Upstream commit aa899e686d442c63d50f4d369cc02dbbf0941cb0 ]

vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances.

Reviewed-by: Nicolas Saenz Julienne nsaenz@kernel.org Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Link: https://lore.kernel.org/r/1642968143-19281-17-git-send-email-stefan.wahren@i... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c index b9505bb51f45..de25140159e3 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c @@ -1209,6 +1209,9 @@ int vchiq_dump_platform_instances(void *dump_context) int len; int i;

+ if (!state) + return -ENOTCONN; + /* * There is no list of instances, so instead scan all services, * marking those that have been dumped.

From: Amjad Ouled-Ameur aouledameur@baylibre.com

[ Upstream commit 2f87727130ce17ffefecd0895eeebf22d5a36f6f ]

Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur aouledameur@baylibre.com Reported-by: Jerome Brunet jbrunet@baylibre.com Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Reviewed-by: Philipp Zabel p.zabel@pengutronix.de Acked-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220111095255.176141-2-aouledameur@baylibre.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 2b3c0d730f20..db17c3448bfe 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy) return ret;

ret = clk_prepare_enable(priv->clk); - if (ret) + if (ret) { + reset_control_rearm(priv->reset); return ret; + }

return 0; } @@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy) struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

clk_disable_unprepare(priv->clk); + reset_control_rearm(priv->reset);

return 0; }

From: Amjad Ouled-Ameur aouledameur@baylibre.com

[ Upstream commit 6f1dedf089ab1a4f03ea7aadc3c4a99885b4b4a0 ]

Use reset_control_rearm() call if an error occurs in case phy_meson8b_usb2_power_on() fails after reset() has been called, or in case phy_meson8b_usb2_power_off() is called i.e the resource is no longer used and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur aouledameur@baylibre.com Reported-by: Jerome Brunet jbrunet@baylibre.com Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Acked-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220111095255.176141-4-aouledameur@baylibre.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/amlogic/phy-meson8b-usb2.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c index 77e7e9b1428c..dd96763911b8 100644 --- a/drivers/phy/amlogic/phy-meson8b-usb2.c +++ b/drivers/phy/amlogic/phy-meson8b-usb2.c @@ -154,6 +154,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) ret = clk_prepare_enable(priv->clk_usb_general); if (ret) { dev_err(&phy->dev, "Failed to enable USB general clock\n"); + reset_control_rearm(priv->reset); return ret; }

@@ -161,6 +162,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) if (ret) { dev_err(&phy->dev, "Failed to enable USB DDR clock\n"); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); return ret; }

@@ -199,6 +201,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) dev_warn(&phy->dev, "USB ID detect failed!\n"); clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); return -EINVAL; } } @@ -218,6 +221,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)

clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset);

/* power off the PHY by putting it into reset mode */ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,

From: Pierre Gondois Pierre.Gondois@arm.com

[ Upstream commit ec1c7ad47664f964c1101fe555b6fde0cb124b38 ]

CPUfreq governors request CPU frequencies using information on current CPU usage. The CPPC driver converts them to performance requests. Frequency targets are computed as: target_freq = (util / cpu_capacity) * max_freq target_freq is then clamped between [policy->min, policy->max].

The CPPC driver converts performance values to frequencies (and vice-versa) using cppc_cpufreq_perf_to_khz() and cppc_cpufreq_khz_to_perf(). These functions both use two different factors depending on the range of the input value. For cppc_cpufreq_khz_to_perf(): - (NOMINAL_PERF / NOMINAL_FREQ) or - (LOWEST_PERF / LOWEST_FREQ) and for cppc_cpufreq_perf_to_khz(): - (NOMINAL_FREQ / NOMINAL_PERF) or - ((NOMINAL_PERF - LOWEST_FREQ) / (NOMINAL_PERF - LOWEST_PERF))

This means: 1- the functions are not inverse for some values: (perf_to_khz(khz_to_perf(x)) != x) 2- cppc_cpufreq_perf_to_khz(LOWEST_PERF) can sometimes give a different value from LOWEST_FREQ due to integer approximation 3- it is implied that performance and frequency are proportional (NOMINAL_FREQ / NOMINAL_PERF) == (LOWEST_PERF / LOWEST_FREQ)

This patch changes the conversion functions to an affine function. This fixes the 3 points above.

Suggested-by: Lukasz Luba lukasz.luba@arm.com Suggested-by: Morten Rasmussen morten.rasmussen@arm.com Signed-off-by: Pierre Gondois Pierre.Gondois@arm.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/cppc_cpufreq.c | 43 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index db17196266e4..82d370ae6a4a 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -303,52 +303,48 @@ static u64 cppc_get_dmi_max_khz(void)

/* * If CPPC lowest_freq and nominal_freq registers are exposed then we can - * use them to convert perf to freq and vice versa - * - * If the perf/freq point lies between Nominal and Lowest, we can treat - * (Low perf, Low freq) and (Nom Perf, Nom freq) as 2D co-ordinates of a line - * and extrapolate the rest - * For perf/freq > Nominal, we use the ratio perf:freq at Nominal for conversion + * use them to convert perf to freq and vice versa. The conversion is + * extrapolated as an affine function passing by the 2 points: + * - (Low perf, Low freq) + * - (Nominal perf, Nominal perf) */ static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data, unsigned int perf) { struct cppc_perf_caps *caps = &cpu_data->perf_caps; + s64 retval, offset = 0; static u64 max_khz; u64 mul, div;

if (caps->lowest_freq && caps->nominal_freq) { - if (perf >= caps->nominal_perf) { - mul = caps->nominal_freq; - div = caps->nominal_perf; - } else { - mul = caps->nominal_freq - caps->lowest_freq; - div = caps->nominal_perf - caps->lowest_perf; - } + mul = caps->nominal_freq - caps->lowest_freq; + div = caps->nominal_perf - caps->lowest_perf; + offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div); } else { if (!max_khz) max_khz = cppc_get_dmi_max_khz(); mul = max_khz; div = caps->highest_perf; } - return (u64)perf * mul / div; + + retval = offset + div64_u64(perf * mul, div); + if (retval >= 0) + return retval; + return 0; }

static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data, unsigned int freq) { struct cppc_perf_caps *caps = &cpu_data->perf_caps; + s64 retval, offset = 0; static u64 max_khz; u64 mul, div;

if (caps->lowest_freq && caps->nominal_freq) { - if (freq >= caps->nominal_freq) { - mul = caps->nominal_perf; - div = caps->nominal_freq; - } else { - mul = caps->lowest_perf; - div = caps->lowest_freq; - } + mul = caps->nominal_perf - caps->lowest_perf; + div = caps->nominal_freq - caps->lowest_freq; + offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div); } else { if (!max_khz) max_khz = cppc_get_dmi_max_khz(); @@ -356,7 +352,10 @@ static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data, div = max_khz; }

- return (u64)freq * mul / div; + retval = offset + div64_u64(freq * mul, div); + if (retval >= 0) + return retval; + return 0; }

static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,

From: Xiaoke Wang xkernel.wang@foxmail.com

[ Upstream commit 60f1d3c92dc1ef1026e5b917a329a7fa947da036 ]

One error handler of wfx_init_common() return without calling ieee80211_free_hw(hw), which may result in memory leak. And I add one err label to unify the error handler, which is useful for the subsequent changes.

Suggested-by: Jérôme Pouiller jerome.pouiller@silabs.com Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Jérôme Pouiller jerome.pouiller@silabs.com Signed-off-by: Xiaoke Wang xkernel.wang@foxmail.com Link: https://lore.kernel.org/r/tencent_24A24A3EFF61206ECCC4B94B1C5C1454E108@qq.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/wfx/main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c index 858d778cc589..e3999e95ce85 100644 --- a/drivers/staging/wfx/main.c +++ b/drivers/staging/wfx/main.c @@ -322,7 +322,8 @@ struct wfx_dev *wfx_init_common(struct device *dev, wdev->pdata.gpio_wakeup = devm_gpiod_get_optional(dev, "wakeup", GPIOD_OUT_LOW); if (IS_ERR(wdev->pdata.gpio_wakeup)) - return NULL; + goto err; + if (wdev->pdata.gpio_wakeup) gpiod_set_consumer_name(wdev->pdata.gpio_wakeup, "wfx wakeup");

@@ -341,6 +342,10 @@ struct wfx_dev *wfx_init_common(struct device *dev, return NULL;

return wdev; + +err: + ieee80211_free_hw(hw); + return NULL; }

int wfx_probe(struct wfx_dev *wdev)

From: Xin Xiong xiongx18@fudan.edu.cn

[ Upstream commit b7f114edd54326f730a754547e7cfb197b5bc132 ]

[You don't often get email from xiongx18@fudan.edu.cn. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]

The reference counting issue happens in two error paths in the function _nfs42_proc_copy_notify(). In both error paths, the function simply returns the error code and forgets to balance the refcount of object `ctx`, bumped by get_nfs_open_context() earlier, which may cause refcount leaks.

Fix it by balancing refcount of the `ctx` object before the function returns in both error paths.

Signed-off-by: Xin Xiong xiongx18@fudan.edu.cn Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs42proc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c index 8b21ff1be717..438de4f93ce7 100644 --- a/fs/nfs/nfs42proc.c +++ b/fs/nfs/nfs42proc.c @@ -592,8 +592,10 @@ static int _nfs42_proc_copy_notify(struct file *src, struct file *dst,

ctx = get_nfs_open_context(nfs_file_open_context(src)); l_ctx = nfs_get_lock_context(ctx); - if (IS_ERR(l_ctx)) - return PTR_ERR(l_ctx); + if (IS_ERR(l_ctx)) { + status = PTR_ERR(l_ctx); + goto out; + }

status = nfs4_set_rw_stateid(&args->cna_src_stateid, ctx, l_ctx, FMODE_READ); @@ -601,7 +603,7 @@ static int _nfs42_proc_copy_notify(struct file *src, struct file *dst, if (status) { if (status == -EAGAIN) status = -NFS4ERR_BAD_STATEID; - return status; + goto out; }

status = nfs4_call_sync(src_server->client, src_server, &msg, @@ -610,6 +612,7 @@ static int _nfs42_proc_copy_notify(struct file *src, struct file *dst, if (status == -ENOTSUPP) src_server->caps &= ~NFS_CAP_COPY_NOTIFY;

+out: put_nfs_open_context(nfs_file_open_context(src)); return status; }

From: Ohad Sharabi osharabi@habana.ai

[ Upstream commit eb85eec858c1a5c11d3a0bff403f6440b05b40dc ]

This patch fixes what seems to be copy paste error.

We will have a memory leak if the host-resident shadow is NULL (which will likely happen as the DR and HR are not dependent).

Signed-off-by: Ohad Sharabi osharabi@habana.ai Reviewed-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/common/mmu/mmu_v1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/habanalabs/common/mmu/mmu_v1.c b/drivers/misc/habanalabs/common/mmu/mmu_v1.c index 0f536f79dd9c..e68e9f71c546 100644 --- a/drivers/misc/habanalabs/common/mmu/mmu_v1.c +++ b/drivers/misc/habanalabs/common/mmu/mmu_v1.c @@ -467,7 +467,7 @@ static void hl_mmu_v1_fini(struct hl_device *hdev) { /* MMU H/W fini was already done in device hw_fini() */

- if (!ZERO_OR_NULL_PTR(hdev->mmu_priv.hr.mmu_shadow_hop0)) { + if (!ZERO_OR_NULL_PTR(hdev->mmu_priv.dr.mmu_shadow_hop0)) { kvfree(hdev->mmu_priv.dr.mmu_shadow_hop0); gen_pool_destroy(hdev->mmu_priv.dr.mmu_pgt_pool);

From: Dongli Zhang dongli.zhang@oracle.com

[ Upstream commit eed05744322da07dd7e419432dcedf3c2e017179 ]

The sched_clock() can be used very early since commit 857baa87b642 ("sched/clock: Enable sched clock early"). In addition, with commit 38669ba205d1 ("x86/xen/time: Output xen sched_clock time from 0"), kdump kernel in Xen HVM guest may panic at very early stage when accessing &__this_cpu_read(xen_vcpu)->time as in below:

setup_arch() -> init_hypervisor_platform() -> x86_init.hyper.init_platform = xen_hvm_guest_init() -> xen_hvm_init_time_ops() -> xen_clocksource_read() -> src = &__this_cpu_read(xen_vcpu)->time;

This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info' embedded inside 'shared_info' during early stage until xen_vcpu_setup() is used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.

However, when Xen HVM guest panic on vcpu >= 32, since xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.

This patch calls xen_hvm_init_time_ops() again later in xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is registered when the boot vcpu is >= 32.

This issue can be reproduced on purpose via below command at the guest side when kdump/kexec is enabled:

"taskset -c 33 echo c > /proc/sysrq-trigger"

The bugfix for PVM is not implemented due to the lack of testing environment.

[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]

Cc: Joe Jin joe.jin@oracle.com Signed-off-by: Dongli Zhang dongli.zhang@oracle.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/xen/smp_hvm.c | 6 ++++++ arch/x86/xen/time.c | 24 +++++++++++++++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/smp_hvm.c b/arch/x86/xen/smp_hvm.c index 6ff3c887e0b9..b70afdff419c 100644 --- a/arch/x86/xen/smp_hvm.c +++ b/arch/x86/xen/smp_hvm.c @@ -19,6 +19,12 @@ static void __init xen_hvm_smp_prepare_boot_cpu(void) */ xen_vcpu_setup(0);

+ /* + * Called again in case the kernel boots on vcpu >= MAX_VIRT_CPUS. + * Refer to comments in xen_hvm_init_time_ops(). + */ + xen_hvm_init_time_ops(); + /* * The alternative logic (which patches the unlock/lock) runs before * the smp bootup up code is activated. Hence we need to set this up diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index d9c945ee1100..9ef0a5cca96e 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -558,6 +558,11 @@ static void xen_hvm_setup_cpu_clockevents(void)

void __init xen_hvm_init_time_ops(void) { + static bool hvm_time_initialized; + + if (hvm_time_initialized) + return; + /* * vector callback is needed otherwise we cannot receive interrupts * on cpu > 0 and at this point we don't know how many cpus are @@ -567,7 +572,22 @@ void __init xen_hvm_init_time_ops(void) return;

if (!xen_feature(XENFEAT_hvm_safe_pvclock)) { - pr_info("Xen doesn't support pvclock on HVM, disable pv timer"); + pr_info_once("Xen doesn't support pvclock on HVM, disable pv timer"); + return; + } + + /* + * Only MAX_VIRT_CPUS 'vcpu_info' are embedded inside 'shared_info'. + * The __this_cpu_read(xen_vcpu) is still NULL when Xen HVM guest + * boots on vcpu >= MAX_VIRT_CPUS (e.g., kexec), To access + * __this_cpu_read(xen_vcpu) via xen_clocksource_read() will panic. + * + * The xen_hvm_init_time_ops() should be called again later after + * __this_cpu_read(xen_vcpu) is available. + */ + if (!__this_cpu_read(xen_vcpu)) { + pr_info("Delay xen_init_time_common() as kernel is running on vcpu=%d\n", + xen_vcpu_nr(0)); return; }

@@ -577,6 +597,8 @@ void __init xen_hvm_init_time_ops(void) x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents;

x86_platform.set_wallclock = xen_set_wallclock; + + hvm_time_initialized = true; } #endif

From: Maxime Ripard maxime@cerno.tech

[ Upstream commit 10c46f2ea914202482d19cf80dcc9c321c9ff59b ]

If we were to have two users of the same clock, doing something like:

clk_set_rate_range(user1, 1000, 2000); clk_set_rate_range(user2, 3000, 4000);

The second call would fail with -EINVAL, preventing from getting in a situation where we end up with impossible limits.

However, this is never explicitly checked against and enforced, and works by relying on an undocumented behaviour of clk_set_rate().

Indeed, on the first clk_set_rate_range will make sure the current clock rate is within the new range, so it will be between 1000 and 2000Hz. On the second clk_set_rate_range(), it will consider (rightfully), that our current clock is outside of the 3000-4000Hz range, and will call clk_core_set_rate_nolock() to set it to 3000Hz.

clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will eventually check that our rate 3000Hz rate is outside the min 3000Hz max 2000Hz range, will bail out, the error will propagate and we'll eventually return -EINVAL.

This solely relies on the fact that clk_calc_new_rates(), and in particular clk_core_determine_round_nolock(), won't modify the new rate allowing the error to be reported. That assumption won't be true for all drivers, and most importantly we'll break that assumption in a later patch.

It can also be argued that we shouldn't even reach the point where we're calling clk_core_set_rate_nolock().

Let's make an explicit check for disjoints range before we're doing anything.

Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/20220225143534.405820-4-maxime@cerno.tech Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/clk.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 2c5db2df9d42..aaf2793ef638 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -631,6 +631,24 @@ static void clk_core_get_boundaries(struct clk_core *core, *max_rate = min(*max_rate, clk_user->max_rate); }

+static bool clk_core_check_boundaries(struct clk_core *core, + unsigned long min_rate, + unsigned long max_rate) +{ + struct clk *user; + + lockdep_assert_held(&prepare_lock); + + if (min_rate > core->max_rate || max_rate < core->min_rate) + return false; + + hlist_for_each_entry(user, &core->clks, clks_node) + if (min_rate > user->max_rate || max_rate < user->min_rate) + return false; + + return true; +} + void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate, unsigned long max_rate) { @@ -2347,6 +2365,11 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) clk->min_rate = min; clk->max_rate = max;

+ if (!clk_core_check_boundaries(clk->core, min, max)) { + ret = -EINVAL; + goto out; + } + rate = clk_core_get_rate_nolock(clk->core); if (rate < min || rate > max) { /* @@ -2375,6 +2398,7 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) } }

+out: if (clk->exclusive_count) clk_core_rate_protect(clk->core);

From: NeilBrown neilb@suse.de

[ Upstream commit a80a8461868905823609be97f91776a26befe839 ]

Currently, tasks marked as "swapper" tasks get put to the front of non-priority rpc_queues, and are sorted earlier than non-swapper tasks on the transport's ->xmit_queue.

This is pointless as currently *all* tasks for a mount that has swap enabled on *any* file are marked as "swapper" tasks. So the net result is that the non-priority rpc_queues are reverse-ordered (LIFO).

This scheduling boost is not necessary to avoid deadlocks, and hurts fairness, so remove it. If there were a need to expedite some requests, the tk_priority mechanism is a more appropriate tool.

Signed-off-by: NeilBrown neilb@suse.de Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/sched.c | 7 ------- net/sunrpc/xprt.c | 11 ----------- 2 files changed, 18 deletions(-)

diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index ae295844ac55..9020cedb7c95 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -186,11 +186,6 @@ static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,

/* * Add new request to wait queue. - * - * Swapper tasks always get inserted at the head of the queue. - * This should avoid many nasty memory deadlocks and hopefully - * improve overall performance. - * Everyone else gets appended to the queue to ensure proper FIFO behavior. */ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue, struct rpc_task *task, @@ -199,8 +194,6 @@ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue, INIT_LIST_HEAD(&task->u.tk_wait.timer_list); if (RPC_IS_PRIORITY(queue)) __rpc_add_wait_queue_priority(queue, task, queue_priority); - else if (RPC_IS_SWAPPER(task)) - list_add(&task->u.tk_wait.list, &queue->tasks[0]); else list_add_tail(&task->u.tk_wait.list, &queue->tasks[0]); task->tk_waitqueue = queue; diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 75acde97d748..b1bb466bbdda 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -1354,17 +1354,6 @@ xprt_request_enqueue_transmit(struct rpc_task *task) INIT_LIST_HEAD(&req->rq_xmit2); goto out; } - } else if (RPC_IS_SWAPPER(task)) { - list_for_each_entry(pos, &xprt->xmit_queue, rq_xmit) { - if (pos->rq_cong || pos->rq_bytes_sent) - continue; - if (RPC_IS_SWAPPER(pos->rq_task)) - continue; - /* Note: req is added _before_ pos */ - list_add_tail(&req->rq_xmit, &pos->rq_xmit); - INIT_LIST_HEAD(&req->rq_xmit2); - goto out; - } } else if (!req->rq_seqno) { list_for_each_entry(pos, &xprt->xmit_queue, rq_xmit) { if (pos->rq_task->tk_owner != task->tk_owner)

From: NeilBrown neilb@suse.de

[ Upstream commit c265de257f558a05c1859ee9e3fed04883b9ec0e ]

The commit handling code is not safe against memory-pressure deadlocks when writing to swap. In particular, nfs_commitdata_alloc() blocks indefinitely waiting for memory, and this can consume all available workqueue threads.

swap-out most likely uses STABLE writes anyway as COND_STABLE indicates that a stable write should be used if the write fits in a single request, and it normally does. However if we ever swap with a small wsize, or gather unusually large numbers of pages for a single write, this might change.

For safety, make it explicit in the code that direct writes used for swap must always use FLUSH_STABLE.

Signed-off-by: NeilBrown neilb@suse.de Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index e6f104b6f065..737b30792ac4 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -793,7 +793,7 @@ static const struct nfs_pgio_completion_ops nfs_direct_write_completion_ops = { */ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, struct iov_iter *iter, - loff_t pos) + loff_t pos, int ioflags) { struct nfs_pageio_descriptor desc; struct inode *inode = dreq->inode; @@ -801,7 +801,7 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, size_t requested_bytes = 0; size_t wsize = max_t(size_t, NFS_SERVER(inode)->wsize, PAGE_SIZE);

- nfs_pageio_init_write(&desc, inode, FLUSH_COND_STABLE, false, + nfs_pageio_init_write(&desc, inode, ioflags, false, &nfs_direct_write_completion_ops); desc.pg_dreq = dreq; get_dreq(dreq); @@ -947,11 +947,13 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter, pnfs_init_ds_commit_info_ops(&dreq->ds_cinfo, inode);

if (swap) { - requested = nfs_direct_write_schedule_iovec(dreq, iter, pos); + requested = nfs_direct_write_schedule_iovec(dreq, iter, pos, + FLUSH_STABLE); } else { nfs_start_io_direct(inode);

- requested = nfs_direct_write_schedule_iovec(dreq, iter, pos); + requested = nfs_direct_write_schedule_iovec(dreq, iter, pos, + FLUSH_COND_STABLE);

if (mapping->nrpages) { invalidate_inode_pages2_range(mapping,

From: Nathan Chancellor nathan@kernel.org

[ Upstream commit aaeed6ecc1253ce1463fa1aca0b70a4ccbc9fa75 ]

There are two outstanding issues with CONFIG_X86_X32_ABI and llvm-objcopy, with similar root causes:

1. llvm-objcopy does not properly convert .note.gnu.property when going from x86_64 to x86_x32, resulting in a corrupted section when linking:

https://github.com/ClangBuiltLinux/linux/issues/1141

2. llvm-objcopy produces corrupted compressed debug sections when going from x86_64 to x86_x32, also resulting in an error when linking:

https://github.com/ClangBuiltLinux/linux/issues/514

After commit 41c5ef31ad71 ("x86/ibt: Base IBT bits"), the .note.gnu.property section is always generated when CONFIG_X86_KERNEL_IBT is enabled, which causes the first issue to become visible with an allmodconfig build:

ld.lld: error: arch/x86/entry/vdso/vclock_gettime-x32.o:(.note.gnu.property+0x1c): program property is too short

To avoid this error, do not allow CONFIG_X86_X32_ABI to be selected when using llvm-objcopy. If the two issues ever get fixed in llvm-objcopy, this can be turned into a feature check.

Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lore.kernel.org/r/20220314194842.3452-3-nathan@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5c2ccb85f2ef..d377d8af5a9f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2827,6 +2827,11 @@ config IA32_AOUT config X86_X32 bool "x32 ABI for 64-bit mode" depends on X86_64 + # llvm-objcopy does not convert x86_64 .note.gnu.property or + # compressed debug sections to x86_x32 properly: + # https://github.com/ClangBuiltLinux/linux/issues/514 + # https://github.com/ClangBuiltLinux/linux/issues/1141 + depends on $(success,$(OBJCOPY) --version | head -n1 | grep -qv llvm) help Include code to run binaries for the x32 native 32-bit ABI for 64-bit processors. An x32 process gets access to the

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit fefb8a2a941338d871e2d83fbd65fbfa068857bd ]

Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log.

Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names.

Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init

Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs

Signed-off-by: Randy Dunlap rdunlap@infradead.org Reviewed-by: Amit Shah amit@kernel.org Cc: virtualization@lists.linux-foundation.org Cc: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20220316192010.19001-3-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/virtio_console.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index f864b17be7e3..35025f283bf6 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -2245,7 +2245,7 @@ static struct virtio_driver virtio_rproc_serial = { .remove = virtcons_remove, };