From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
configuration register(bits 7:4) which defines the maximum number of reads from the source and writes to the destination that may be outstanding at any given point of time. This field must be programmed with a value between 1 and 8. A value of 0 will prevent any transfers from happening.
Thus added 'has_outstanding_reqs' bool member in chip data structure and is set to false for Tegra210, since the field is not applicable. For Tegra186 it is set to true and channel configuration is updated with maximum outstanding requests.
Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194") Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar spujar@nvidia.com --- drivers/dma/tegra210-adma.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index 5f8adf5..e19732f 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -66,6 +66,8 @@ #define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \ TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(3))
+#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs) (reqs << 4) + #define ADMA_CH_REG_FIELD_VAL(val, mask, shift) (((val) & mask) << shift)
struct tegra_adma; @@ -77,6 +79,7 @@ struct tegra_adma; * @ch_req_tx_shift: Register offset for AHUB transmit channel select. * @ch_req_rx_shift: Register offset for AHUB receive channel select. * @ch_base_offset: Register offset of DMA channel registers. + * @has_outstanding_reqs: If DMA channel can have outstanding requests. * @ch_fifo_ctrl: Default value for channel FIFO CTRL register. * @ch_req_mask: Mask for Tx or Rx channel select. * @ch_req_max: Maximum number of Tx or Rx channels available. @@ -95,6 +98,7 @@ struct tegra_adma_chip_data { unsigned int ch_req_max; unsigned int ch_reg_size; unsigned int nr_channels; + bool has_outstanding_reqs; };
/* @@ -594,6 +598,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc, ADMA_CH_CTRL_FLOWCTRL_EN; ch_regs->config |= cdata->adma_get_burst_config(burst_size); ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1); + if (cdata->has_outstanding_reqs) + ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8); ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl; ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
@@ -778,6 +784,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = { .ch_req_tx_shift = 28, .ch_req_rx_shift = 24, .ch_base_offset = 0, + .has_outstanding_reqs = false, .ch_fifo_ctrl = TEGRA210_FIFO_CTRL_DEFAULT, .ch_req_mask = 0xf, .ch_req_max = 10, @@ -792,6 +799,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = { .ch_req_tx_shift = 27, .ch_req_rx_shift = 22, .ch_base_offset = 0x10000, + .has_outstanding_reqs = true, .ch_fifo_ctrl = TEGRA186_FIFO_CTRL_DEFAULT, .ch_req_mask = 0x1f, .ch_req_max = 20,
On 16/09/2019 09:37, Sameer Pujar wrote:
From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel configuration register(bits 7:4) which defines the maximum number of reads from the source and writes to the destination that may be outstanding at any given point of time. This field must be programmed with a value between 1 and 8. A value of 0 will prevent any transfers from happening.
Thus added 'has_outstanding_reqs' bool member in chip data structure and is set to false for Tegra210, since the field is not applicable. For Tegra186 it is set to true and channel configuration is updated with maximum outstanding requests.
Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194") Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar spujar@nvidia.com
drivers/dma/tegra210-adma.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index 5f8adf5..e19732f 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -66,6 +66,8 @@ #define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \ TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(3)) +#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs) (reqs << 4)
Shouldn't we place this under the defines for ADMA_CH_CONFIG register? This would be consistent with how we organise the definitions today.
#define ADMA_CH_REG_FIELD_VAL(val, mask, shift) (((val) & mask) << shift) struct tegra_adma; @@ -77,6 +79,7 @@ struct tegra_adma;
- @ch_req_tx_shift: Register offset for AHUB transmit channel select.
- @ch_req_rx_shift: Register offset for AHUB receive channel select.
- @ch_base_offset: Register offset of DMA channel registers.
- @has_outstanding_reqs: If DMA channel can have outstanding requests.
- @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
- @ch_req_mask: Mask for Tx or Rx channel select.
- @ch_req_max: Maximum number of Tx or Rx channels available.
@@ -95,6 +98,7 @@ struct tegra_adma_chip_data { unsigned int ch_req_max; unsigned int ch_reg_size; unsigned int nr_channels;
- bool has_outstanding_reqs;
}; /* @@ -594,6 +598,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc, ADMA_CH_CTRL_FLOWCTRL_EN; ch_regs->config |= cdata->adma_get_burst_config(burst_size); ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
- if (cdata->has_outstanding_reqs)
ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8);@@ -778,6 +784,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = { .ch_req_tx_shift = 28, .ch_req_rx_shift = 24, .ch_base_offset = 0,
- .has_outstanding_reqs = false, .ch_fifo_ctrl = TEGRA210_FIFO_CTRL_DEFAULT, .ch_req_mask = 0xf, .ch_req_max = 10,
@@ -792,6 +799,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = { .ch_req_tx_shift = 27, .ch_req_rx_shift = 22, .ch_base_offset = 0x10000,
- .has_outstanding_reqs = true, .ch_fifo_ctrl = TEGRA186_FIFO_CTRL_DEFAULT, .ch_req_mask = 0x1f, .ch_req_max = 20,
Otherwise ...
Acked-by: Jon Hunter jonathanh@nvidia.com
Cheers Jon
On 9/16/2019 2:54 PM, Jon Hunter wrote:
On 16/09/2019 09:37, Sameer Pujar wrote:
From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel configuration register(bits 7:4) which defines the maximum number of reads from the source and writes to the destination that may be outstanding at any given point of time. This field must be programmed with a value between 1 and 8. A value of 0 will prevent any transfers from happening.
Thus added 'has_outstanding_reqs' bool member in chip data structure and is set to false for Tegra210, since the field is not applicable. For Tegra186 it is set to true and channel configuration is updated with maximum outstanding requests.
Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194") Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar spujar@nvidia.com
drivers/dma/tegra210-adma.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index 5f8adf5..e19732f 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -66,6 +66,8 @@ #define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \ TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(3)) +#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs) (reqs << 4)
Shouldn't we place this under the defines for ADMA_CH_CONFIG register? This would be consistent with how we organise the definitions today.
yes, will move.
#define ADMA_CH_REG_FIELD_VAL(val, mask, shift) (((val) & mask) << shift) struct tegra_adma; @@ -77,6 +79,7 @@ struct tegra_adma;
- @ch_req_tx_shift: Register offset for AHUB transmit channel select.
- @ch_req_rx_shift: Register offset for AHUB receive channel select.
- @ch_base_offset: Register offset of DMA channel registers.
- @has_outstanding_reqs: If DMA channel can have outstanding requests.
- @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
- @ch_req_mask: Mask for Tx or Rx channel select.
- @ch_req_max: Maximum number of Tx or Rx channels available.
@@ -95,6 +98,7 @@ struct tegra_adma_chip_data { unsigned int ch_req_max; unsigned int ch_reg_size; unsigned int nr_channels;
- bool has_outstanding_reqs; };
/* @@ -594,6 +598,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc, ADMA_CH_CTRL_FLOWCTRL_EN; ch_regs->config |= cdata->adma_get_burst_config(burst_size); ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
- if (cdata->has_outstanding_reqs)
ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8);@@ -778,6 +784,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = { .ch_req_tx_shift = 28, .ch_req_rx_shift = 24, .ch_base_offset = 0,
- .has_outstanding_reqs = false, .ch_fifo_ctrl = TEGRA210_FIFO_CTRL_DEFAULT, .ch_req_mask = 0xf, .ch_req_max = 10,
@@ -792,6 +799,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = { .ch_req_tx_shift = 27, .ch_req_rx_shift = 22, .ch_base_offset = 0x10000,
- .has_outstanding_reqs = true, .ch_fifo_ctrl = TEGRA186_FIFO_CTRL_DEFAULT, .ch_req_mask = 0x1f, .ch_req_max = 20,
Otherwise ...
Acked-by: Jon Hunter jonathanh@nvidia.com
Cheers Jon
linux-stable-mirror@lists.linaro.org
-
Jon Hunter -
Sameer Pujar