There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com --- v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..d50b9e004e76 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child;
- if (port_dev->child) { - usb_disable_usb2_hardware_lpm(port_dev->child); - usb_unlocked_disable_lpm(port_dev->child); + if (udev && !pm_runtime_suspended(&udev->dev)) { + usb_disable_usb2_hardware_lpm(udev); + usb_unlocked_disable_lpm(udev); } }
On Thu, Dec 05, 2024 at 05:12:15PM +0800, Kai-Heng Feng wrote:
There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com
v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..d50b9e004e76 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev);
- struct usb_device *udev = port_dev->child;
- if (port_dev->child) {
usb_disable_usb2_hardware_lpm(port_dev->child);usb_unlocked_disable_lpm(port_dev->child);
- if (udev && !pm_runtime_suspended(&udev->dev)) {
Instead of testing !pm_runtime_suspended(&udev->dev), it would be better to test udev->port_is_suspended. This field records the actual status of the device's upstream port, whereas in some circumstances pm_runtime_suspended() will return true when the port is in U0.
Alan Stern
usb_disable_usb2_hardware_lpm(udev);usb_unlocked_disable_lpm(udev);} -- 2.47.0
On 2024/12/5 11:06 PM, Alan Stern wrote:
External email: Use caution opening links or attachments
On Thu, Dec 05, 2024 at 05:12:15PM +0800, Kai-Heng Feng wrote:
There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com
v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..d50b9e004e76 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev);
struct usb_device *udev = port_dev->child;
if (port_dev->child) {usb_disable_usb2_hardware_lpm(port_dev->child);usb_unlocked_disable_lpm(port_dev->child);
if (udev && !pm_runtime_suspended(&udev->dev)) {Instead of testing !pm_runtime_suspended(&udev->dev), it would be better to test udev->port_is_suspended. This field records the actual status of the device's upstream port, whereas in some circumstances pm_runtime_suspended() will return true when the port is in U0.
Thanks for the tip. This indeed is a better approach. Will send another revision.
Kai-Heng
Alan Stern
usb_disable_usb2_hardware_lpm(udev);usb_unlocked_disable_lpm(udev); }-- 2.47.0
linux-stable-mirror@lists.linaro.org
-
Alan Stern -
Kai-Heng Feng