There is a scenario where DWC3 runtime suspend is blocked due to the dwc->connected flag still being true while PM usage_count is zero after DWC3 giveback is completed and the USB gadget session is being terminated. This leads to a case where nothing schedules a PM runtime idle for the device.

The exact condition is seen with the following sequence: 1. USB bus reset is issued by the host 2. Shortly after, or concurrently, a USB PD DR SWAP request is received (sink->source) 3. USB bus reset event handler runs and issues dwc3_stop_active_transfers(), and pending transfer are stopped 4. DWC3 usage_count decremented to 0, and runtime idle occurs while dwc->connected == true, returns -EBUSY 5. DWC3 disconnect event seen, dwc->connected set to false due to DR swap handling 6. No runtime idle after this point

Address this by issuing an asynchronous PM runtime idle call after the disconnect event is completed, as it modifies the dwc->connected flag, which is what blocks the initial runtime idle.

Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: stable@vger.kernel.org Signed-off-by: Wesley Cheng quic_wcheng@quicinc.com --- changes from v1: - CC'ed stable

drivers/usb/dwc3/gadget.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 858fe4c299b7..de6056277f94 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3973,6 +3973,13 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);

dwc3_ep0_reset_state(dwc); + + /* + * Request PM idle to address condition where usage count is + * already decremented to zero, but waiting for the disconnect + * interrupt to set dwc->connected to FALSE. + */ + pm_request_idle(dwc->dev); }

static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)