From: Ajit Khaparde ajit.khaparde@broadcom.com
[ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ]
The Broadcom BCM5760X NIC may be a multi-function device.
While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated.
Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO.
[kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broad... Signed-off-by: Ajit Khaparde ajit.khaparde@broadcom.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Andy Gospodarek gospo@broadcom.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index ec4277d7835b2..1bf1a83dabb93 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5092,6 +5092,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
From: Vidya Sagar vidyas@nvidia.com
[ Upstream commit 7246a4520b4bf1494d7d030166a11b5226f6d508 ]
Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable support for "linux,pci-probe-only" on a per host bridge basis.
This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if !PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care of reassigning the resources that are not already claimed.
Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com Signed-off-by: Vidya Sagar vidyas@nvidia.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-host-common.c | 4 ---- drivers/pci/probe.c | 20 +++++++++----------- 2 files changed, 9 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index 6be3266cd7b5b..e2602e38ae452 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -73,10 +73,6 @@ int pci_host_common_probe(struct platform_device *pdev) if (IS_ERR(cfg)) return PTR_ERR(cfg);
- /* Do not reassign resources if probe only */ - if (!pci_has_flag(PCI_PROBE_ONLY)) - pci_add_flags(PCI_REASSIGN_ALL_BUS); - bridge->sysdata = cfg; bridge->ops = (struct pci_ops *)&ops->pci_ops; bridge->msi_domain = true; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 43159965e09e9..217cf8a491eda 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -3080,20 +3080,18 @@ int pci_host_probe(struct pci_host_bridge *bridge)
bus = bridge->bus;
+ /* If we must preserve the resource configuration, claim now */ + if (bridge->preserve_config) + pci_bus_claim_resources(bus); + /* - * We insert PCI resources into the iomem_resource and - * ioport_resource trees in either pci_bus_claim_resources() - * or pci_bus_assign_resources(). + * Assign whatever was left unassigned. If we didn't claim above, + * this will reassign everything. */ - if (pci_has_flag(PCI_PROBE_ONLY)) { - pci_bus_claim_resources(bus); - } else { - pci_bus_size_bridges(bus); - pci_bus_assign_resources(bus); + pci_assign_unassigned_root_bus_resources(bus);
- list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - } + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child);
pci_bus_add_devices(bus); return 0;
From: Roger Quadros rogerq@kernel.org
[ Upstream commit 0aca19e4037a4143273e90f1b44666b78b4dde9b ]
Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require this bit to be set to workaround a lockup issue with PHY short suspend intervals [1]. Add a platform quirk flag to indicate if Suspend Residency should be enabled.
[1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf i2409 - USB: USB2 PHY locks up due to short suspend
Signed-off-by: Roger Quadros rogerq@kernel.org Signed-off-by: Ravi Gunasekaran r-gunasekaran@ti.com Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20240516044537.16801-2-r-gunasekaran@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/core.h | 1 + drivers/usb/cdns3/drd.c | 10 +++++++++- drivers/usb/cdns3/drd.h | 3 +++ 3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h index 81a9c9d6be08b..57d47348dc193 100644 --- a/drivers/usb/cdns3/core.h +++ b/drivers/usb/cdns3/core.h @@ -44,6 +44,7 @@ struct cdns3_platform_data { bool suspend, bool wakeup); unsigned long quirks; #define CDNS3_DEFAULT_PM_RUNTIME_ALLOW BIT(0) +#define CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE BIT(1) };
/** diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c index ee917f1b091c8..1b4ce2da1e4b8 100644 --- a/drivers/usb/cdns3/drd.c +++ b/drivers/usb/cdns3/drd.c @@ -389,7 +389,7 @@ static irqreturn_t cdns_drd_irq(int irq, void *data) int cdns_drd_init(struct cdns *cdns) { void __iomem *regs; - u32 state; + u32 state, reg; int ret;
regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res); @@ -433,6 +433,14 @@ int cdns_drd_init(struct cdns *cdns) cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *) &cdns->otg_v1_regs->ien; writel(1, &cdns->otg_v1_regs->simulate); + + if (cdns->pdata && + (cdns->pdata->quirks & CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE)) { + reg = readl(&cdns->otg_v1_regs->susp_ctrl); + reg |= SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE; + writel(reg, &cdns->otg_v1_regs->susp_ctrl); + } + cdns->version = CDNS3_CONTROLLER_V1; } else { dev_err(cdns->dev, "not supporte DID=0x%08x\n", state); diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h index d72370c321d39..1e2aee14d6293 100644 --- a/drivers/usb/cdns3/drd.h +++ b/drivers/usb/cdns3/drd.h @@ -193,6 +193,9 @@ struct cdns_otg_irq_regs { /* OTGREFCLK - bitmasks */ #define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31)
+/* SUPS_CTRL - bitmasks */ +#define SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE BIT(17) + /* OVERRIDE - bitmasks */ #define OVERRIDE_IDPULLUP BIT(0) /* Only for CDNS3_CONTROLLER_V0 version */
From: Roger Quadros rogerq@kernel.org
[ Upstream commit b50a2da03bd95784541b3f9058e452cc38f9ba05 ]
TI USB2 PHY is known to have a lockup issue on very short suspend intervals. Enable the Suspend Residency quirk flag to workaround this as described in Errata i2409 [1].
[1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf
Signed-off-by: Roger Quadros rogerq@kernel.org Signed-off-by: Ravi Gunasekaran r-gunasekaran@ti.com Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20240516044537.16801-3-r-gunasekaran@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/cdns3-ti.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c index 5945c4b1e11f6..cfabc12ee0e3c 100644 --- a/drivers/usb/cdns3/cdns3-ti.c +++ b/drivers/usb/cdns3/cdns3-ti.c @@ -16,6 +16,7 @@ #include <linux/of_platform.h> #include <linux/pm_runtime.h> #include <linux/property.h> +#include "core.h"
/* USB Wrapper register offsets */ #define USBSS_PID 0x0 @@ -85,6 +86,18 @@ static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value) writel(value, data->usbss + offset); }
+static struct cdns3_platform_data cdns_ti_pdata = { + .quirks = CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE, /* Errata i2409 */ +}; + +static const struct of_dev_auxdata cdns_ti_auxdata[] = { + { + .compatible = "cdns,usb3", + .platform_data = &cdns_ti_pdata, + }, + {}, +}; + static int cdns_ti_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -176,7 +189,7 @@ static int cdns_ti_probe(struct platform_device *pdev) reg |= USBSS_W1_PWRUP_RST; cdns_ti_writel(data, USBSS_W1, reg);
- error = of_platform_populate(node, NULL, NULL, dev); + error = of_platform_populate(node, NULL, cdns_ti_auxdata, dev); if (error) { dev_err(dev, "failed to create children: %d\n", error); goto err;
From: Peng Hongchi hongchi.peng@siengine.com
[ Upstream commit 1134289b6b93d73721340b66c310fd985385e8fa ]
When using dma_map_sg() to map the scatterlist with iommu enabled, the entries in the scatterlist can be mergerd into less but longer entries in the function __finalise_sg(). So that the number of valid mapped entries is actually smaller than ureq->num_reqs,and there are still some invalid entries in the scatterlist with dma_addr=0xffffffff and len=0. Writing these invalid sg entries into the dma_desc can cause a data transmission error.
The function dma_map_sg() returns the number of valid map entries and the return value is assigned to usb_request::num_mapped_sgs in function usb_gadget_map_request_by_dev(). So that just write valid mapped entries into dma_desc according to the usb_request::num_mapped_sgs, and set the IOC bit if it's the last valid mapped entry.
This patch poses no risk to no-iommu situation, cause ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg() to map the scatterlist whith iommu disabled.
Signed-off-by: Peng Hongchi hongchi.peng@siengine.com Link: https://lore.kernel.org/r/20240523100315.7226-1-hongchi.peng@siengine.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index b2f6da5b65ccd..b26de09f6b6d5 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -885,10 +885,10 @@ static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep, }
/* DMA sg buffer */ - for_each_sg(ureq->sg, sg, ureq->num_sgs, i) { + for_each_sg(ureq->sg, sg, ureq->num_mapped_sgs, i) { dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc, sg_dma_address(sg) + sg->offset, sg_dma_len(sg), - sg_is_last(sg)); + (i == (ureq->num_mapped_sgs - 1))); desc_count += hs_ep->desc_count; }
From: Abhishek Pandit-Subedi abhishekpandit@chromium.org
[ Upstream commit 99516f76db48e1a9d54cdfed63c1babcee4e71a5 ]
ucsi_register_altmode checks IS_ERR for the alt pointer and treats NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled, ucsi_register_displayport returns NULL which causes a NULL pointer dereference in trace. Rather than return NULL, call typec_port_register_altmode to register DisplayPort alternate mode as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.
Reviewed-by: Benson Leung bleung@chromium.org Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Abhishek Pandit-Subedi abhishekpandit@chromium.org Signed-off-by: Jameson Thies jthies@google.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20240510201244.2968152-2-jthies@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/typec/ucsi/ucsi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 2a886e58cd632..42c60eba5fb6e 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -404,7 +404,7 @@ ucsi_register_displayport(struct ucsi_connector *con, bool override, int offset, struct typec_altmode_desc *desc) { - return NULL; + return typec_port_register_altmode(con->port, desc); }
static inline void
From: Jiaxun Yang jiaxun.yang@flygoat.com
[ Upstream commit 98a9e2ac3755a353eefea8c52e23d5b0c50f3899 ]
Add it to silent warning: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts:32.31-40.4: Warning (interrupt_provider): /bus@10000000/msi-controller@2ff00000: Missing '#interrupt-cells' in interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Signed-off-by: Jiaxun Yang jiaxun.yang@flygoat.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts index c945f8565d543..fb180cb2b8e2c 100644 --- a/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts +++ b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts @@ -33,6 +33,7 @@ msi: msi-controller@2ff00000 { compatible = "loongson,pch-msi-1.0"; reg = <0 0x2ff00000 0 0x8>; interrupt-controller; + #interrupt-cells = <1>; msi-controller; loongson,msi-base-vec = <64>; loongson,msi-num-vecs = <192>;
From: Jiaxun Yang jiaxun.yang@flygoat.com
[ Upstream commit d89a415ff8d5e0aad4963f2d8ebb0f9e8110b7fa ]
Add various required properties to silent warnings:
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:116.16-297.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Signed-off-by: Jiaxun Yang jiaxun.yang@flygoat.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/loongson/loongson64-2k1000.dtsi | 37 +++++++++++++++---- 1 file changed, 30 insertions(+), 7 deletions(-)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi index ee3e2153dd13f..b5593f7cc383b 100644 --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi @@ -118,7 +118,6 @@ pci@1a000000 { device_type = "pci"; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <2>;
reg = <0 0x1a000000 0 0x02000000>, <0xfe 0x00000000 0 0x20000000>; @@ -204,93 +203,117 @@ sata@8,0 { interrupt-parent = <&liointc0>; };
- pci_bridge@9,0 { + pcie@9,0 { compatible = "pci0014,7a19.0", "pci0014,7a19", "pciclass060400", "pciclass0604";
reg = <0x4800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; #interrupt-cells = <1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>; + ranges; external-facing; };
- pci_bridge@a,0 { + pcie@a,0 { compatible = "pci0014,7a09.0", "pci0014,7a09", "pciclass060400", "pciclass0604";
reg = <0x5000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; #interrupt-cells = <1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>; + ranges; external-facing; };
- pci_bridge@b,0 { + pcie@b,0 { compatible = "pci0014,7a09.0", "pci0014,7a09", "pciclass060400", "pciclass0604";
reg = <0x5800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; #interrupt-cells = <1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>; + ranges; external-facing; };
- pci_bridge@c,0 { + pcie@c,0 { compatible = "pci0014,7a09.0", "pci0014,7a09", "pciclass060400", "pciclass0604";
reg = <0x6000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; #interrupt-cells = <1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>; + ranges; external-facing; };
- pci_bridge@d,0 { + pcie@d,0 { compatible = "pci0014,7a19.0", "pci0014,7a19", "pciclass060400", "pciclass0604";
reg = <0x6800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; #interrupt-cells = <1>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>; + ranges; external-facing; };
- pci_bridge@e,0 { + pcie@e,0 { compatible = "pci0014,7a09.0", "pci0014,7a09", "pciclass060400", "pciclass0604";
reg = <0x7000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; #interrupt-cells = <1>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>; + ranges; external-facing; };
From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit 5afc2f763edc5daae4722ee46fea4e627d01fa90 ]
If the link is powered off during suspend, electrical noise may cause errors that are logged via AER. If the AER interrupt is enabled and shares an IRQ with PME, that causes a spurious wakeup during suspend.
Disable the AER interrupt during suspend to prevent this. Clear error status before re-enabling IRQ interrupts during resume so we don't get an interrupt for errors that occurred during the suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090 Link: https://lore.kernel.org/r/20240416043225.1462548-2-kai.heng.feng@canonical.c... Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com [bhelgaas: drop pci_ancestor_pr3_present() etc, commit log] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pcie/aer.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index c9afe43628356..eeb9ea9044b43 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -1342,6 +1342,22 @@ static int aer_probe(struct pcie_device *dev) return 0; }
+static int aer_suspend(struct pcie_device *dev) +{ + struct aer_rpc *rpc = get_service_data(dev); + + aer_disable_rootport(rpc); + return 0; +} + +static int aer_resume(struct pcie_device *dev) +{ + struct aer_rpc *rpc = get_service_data(dev); + + aer_enable_rootport(rpc); + return 0; +} + /** * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP * @dev: pointer to Root Port, RCEC, or RCiEP @@ -1413,6 +1429,8 @@ static struct pcie_port_service_driver aerdriver = { .service = PCIE_PORT_SERVICE_AER,
.probe = aer_probe, + .suspend = aer_suspend, + .resume = aer_resume, .remove = aer_remove, };
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 65c90df918205bc84f5448550cde76a54dae5f52 ]
Experimental tests show that JD2_100K is required, otherwise the jack is detected always even with nothing plugged-in.
To avoid matching with other known quirks the SKU information is used.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://patch.msgid.link/20240624121119.91552-2-pierre-louis.bossart@linux.i... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/sof_sdw.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 5980fce817976..dc144cd7e0e3b 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -286,6 +286,15 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { SOF_BT_OFFLOAD_SSP(2) | SOF_SSP_BT_OFFLOAD_PRESENT), }, + { + .callback = sof_sdw_quirk_cb, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_SKU, "0000000000070000"), + }, + .driver_data = (void *)(SOF_SDW_TGL_HDMI | + RT711_JD2_100K), + }, { .callback = sof_sdw_quirk_cb, .matches = {
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 92d5b5930e7d55ca07b483490d6298eee828bbe4 ]
Jack detection needs to rely on JD2, as most other Dell AlderLake-based devices.
Closes: https://github.com/thesofproject/linux/issues/5021 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://patch.msgid.link/20240624121119.91552-4-pierre-louis.bossart@linux.i... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/sof_sdw.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index dc144cd7e0e3b..db1dcb9d70466 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -425,6 +425,15 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { /* No Jack */ .driver_data = (void *)SOF_SDW_TGL_HDMI, }, + { + .callback = sof_sdw_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0B8C"), + }, + .driver_data = (void *)(SOF_SDW_TGL_HDMI | + RT711_JD2), + }, { .callback = sof_sdw_quirk_cb, .matches = {
From: Ma Ke make24@iscas.ac.cn
[ Upstream commit ee0d382feb44ec0f445e2ad63786cd7f3f6a8199 ]
We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array.
Found by static analysis.
Signed-off-by: Ma Ke make24@iscas.ac.cn Reviewed-by: Andrew Jeffery andrew@codeconstruct.com.au Acked-by: Andrew Jeffery andrew@codeconstruct.com.au Link: https://lore.kernel.org/r/20240625022306.2568122-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/aspeed_udc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c index fc2ead0fe6217..4868286574a1c 100644 --- a/drivers/usb/gadget/udc/aspeed_udc.c +++ b/drivers/usb/gadget/udc/aspeed_udc.c @@ -1009,6 +1009,8 @@ static void ast_udc_getstatus(struct ast_udc_dev *udc) break; case USB_RECIP_ENDPOINT: epnum = crq.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum >= AST_UDC_NUM_ENDPOINTS) + goto stall; status = udc->ep[epnum].stopped; break; default:
From: Kishon Vijay Abraham I kishon@ti.com
[ Upstream commit 86f271f22bbb6391410a07e08d6ca3757fda01fa ]
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf
Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@sieme... Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Achal Verma a-verma1@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Jan Kiszka jan.kiszka@siemens.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Reviewed-by: Siddharth Vadapalli s-vadapalli@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pci-keystone.c | 44 ++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index cf3836561316d..4908666d5a95f 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -34,6 +34,11 @@ #define PCIE_DEVICEID_SHIFT 16
/* Application registers */ +#define PID 0x000 +#define RTL GENMASK(15, 11) +#define RTL_SHIFT 11 +#define AM6_PCI_PG1_RTL_VER 0x15 + #define CMD_STATUS 0x004 #define LTSSM_EN_VAL BIT(0) #define OB_XLAT_EN_VAL BIT(1) @@ -104,6 +109,8 @@
#define to_keystone_pcie(x) dev_get_drvdata((x)->dev)
+#define PCI_DEVICE_ID_TI_AM654X 0xb00c + struct ks_pcie_of_data { enum dw_pcie_device_mode mode; const struct dw_pcie_host_ops *host_ops; @@ -527,7 +534,11 @@ static int ks_pcie_start_link(struct dw_pcie *pci) static void ks_pcie_quirk(struct pci_dev *dev) { struct pci_bus *bus = dev->bus; + struct keystone_pcie *ks_pcie; + struct device *bridge_dev; struct pci_dev *bridge; + u32 val; + static const struct pci_device_id rc_pci_devids[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK), .class = PCI_CLASS_BRIDGE_PCI_NORMAL, .class_mask = ~0, }, @@ -539,6 +550,11 @@ static void ks_pcie_quirk(struct pci_dev *dev) .class = PCI_CLASS_BRIDGE_PCI_NORMAL, .class_mask = ~0, }, { 0, }, }; + static const struct pci_device_id am6_pci_devids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654X), + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, + { 0, }, + };
if (pci_is_root_bus(bus)) bridge = dev; @@ -560,10 +576,36 @@ static void ks_pcie_quirk(struct pci_dev *dev) */ if (pci_match_id(rc_pci_devids, bridge)) { if (pcie_get_readrq(dev) > 256) { - dev_info(&dev->dev, "limiting MRRS to 256\n"); + dev_info(&dev->dev, "limiting MRRS to 256 bytes\n"); pcie_set_readrq(dev, 256); } } + + /* + * Memory transactions fail with PCI controller in AM654 PG1.0 + * when MRRS is set to more than 128 bytes. Force the MRRS to + * 128 bytes in all downstream devices. + */ + if (pci_match_id(am6_pci_devids, bridge)) { + bridge_dev = pci_get_host_bridge_device(dev); + if (!bridge_dev && !bridge_dev->parent) + return; + + ks_pcie = dev_get_drvdata(bridge_dev->parent); + if (!ks_pcie) + return; + + val = ks_pcie_app_readl(ks_pcie, PID); + val &= RTL; + val >>= RTL_SHIFT; + if (val != AM6_PCI_PG1_RTL_VER) + return; + + if (pcie_get_readrq(dev) > 128) { + dev_info(&dev->dev, "limiting MRRS to 128 bytes\n"); + pcie_set_readrq(dev, 128); + } + } } DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, ks_pcie_quirk);
From: Kyoungrul Kim k831.kim@samsung.com
[ Upstream commit 7cbff570dbe8907e23bba06f6414899a0fbb2fcc ]
If host tries to remove ufshcd driver from a UFS device it would cause a kernel panic if ufshcd_async_scan fails during ufshcd_probe_hba before adding a SCSI host with scsi_add_host and MCQ is enabled since SCSI host has been defered after MCQ configuration introduced by commit 0cab4023ec7b ("scsi: ufs: core: Defer adding host to SCSI if MCQ is supported").
To guarantee that SCSI host is removed only if it has been added, set the scsi_host_added flag to true after adding a SCSI host and check whether it is set or not before removing it.
Signed-off-by: Kyoungrul Kim k831.kim@samsung.com Signed-off-by: Minwoo Im minwoo.im@samsung.com Link: https://lore.kernel.org/r/20240627085104epcms2p5897a3870ea5c6416aa44f94df6c5... Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 808979a093505..df36b141d4431 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -10114,7 +10114,8 @@ void ufshcd_remove(struct ufs_hba *hba) blk_mq_destroy_queue(hba->tmf_queue); blk_put_queue(hba->tmf_queue); blk_mq_free_tag_set(&hba->tmf_tag_set); - scsi_remove_host(hba->host); + if (hba->scsi_host_added) + scsi_remove_host(hba->host); /* disable interrupts */ ufshcd_disable_intr(hba, hba->intr_mask); ufshcd_hba_stop(hba); @@ -10389,6 +10390,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) dev_err(hba->dev, "scsi_add_host failed\n"); goto out_disable; } + hba->scsi_host_added = true; }
hba->tmf_tag_set = (struct blk_mq_tag_set) { @@ -10470,7 +10472,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) free_tmf_tag_set: blk_mq_free_tag_set(&hba->tmf_tag_set); out_remove_scsi_host: - scsi_remove_host(hba->host); + if (hba->scsi_host_added) + scsi_remove_host(hba->host); out_disable: hba->is_irq_enabled = false; ufshcd_hba_exit(hba);
From: Jiwei Sun sunjw10@lenovo.com
[ Upstream commit f24c9bfcd423e2b2bb0d198456412f614ec2030a ]
The vmd driver creates a "domain" symlink in sysfs for each VMD bridge. Previously this symlink was created after pci_bus_add_devices() added devices below the VMD bridge and emitted udev events to announce them to userspace.
This led to a race between userspace consumers of the udev events and the kernel creation of the symlink. One such consumer is mdadm, which assembles block devices into a RAID array, and for devices below a VMD bridge, mdadm depends on the "domain" symlink.
If mdadm loses the race, it may be unable to assemble a RAID array, which may cause a boot failure or other issues, with complaints like this:
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device'' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.' (udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1.
This symptom prevents the OS from booting successfully.
After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm to detect if there is a mdraid associated with this NVMe disk, and mdadm determines if a NVMe device is connected to a particular VMD domain by checking the "domain" symlink. For example:
Thread A Thread B Thread mdadm vmd_enable_domain pci_bus_add_devices __driver_probe_device ... work_on_cpu schedule_work_on : wakeup Thread B nvme_probe : wakeup scan_work to scan nvme disk and add nvme disk then wakeup udevd : udevd executes mdadm command flush_work main : wait for nvme_probe done ... __driver_probe_device find_driver_devices : probe next nvme device : 1) Detect domain symlink ... 2) Find domain symlink ... from vmd sysfs ... 3) Domain symlink not ... created yet; failed sysfs_create_link : create domain symlink
Create the VMD "domain" symlink before invoking pci_bus_add_devices() to avoid this race.
Suggested-by: Adrian Huang ahuang12@lenovo.com Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com Signed-off-by: Jiwei Sun sunjw10@lenovo.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Nirmal Patel nirmal.patel@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/vmd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index 6ac0afae0ca18..8622d7507c869 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -925,6 +925,9 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) dev_set_msi_domain(&vmd->bus->dev, dev_get_msi_domain(&vmd->dev->dev));
+ WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj, + "domain"), "Can't create symlink to domain\n"); + vmd_acpi_begin();
pci_scan_child_bus(vmd->bus); @@ -964,9 +967,6 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) pci_bus_add_devices(vmd->bus);
vmd_acpi_end(); - - WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj, - "domain"), "Can't create symlink to domain\n"); return 0; }
@@ -1042,8 +1042,8 @@ static void vmd_remove(struct pci_dev *dev) { struct vmd_dev *vmd = pci_get_drvdata(dev);
- sysfs_remove_link(&vmd->dev->dev.kobj, "domain"); pci_stop_root_bus(vmd->bus); + sysfs_remove_link(&vmd->dev->dev.kobj, "domain"); pci_remove_root_bus(vmd->bus); vmd_cleanup_srcu(vmd); vmd_detach_resources(vmd);
From: Dan Williams dan.j.williams@intel.com
[ Upstream commit a4e772898f8bf2e7e1cf661a12c60a5612c4afab ]
One of the true positives that the cfg_access_lock lockdep effort identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: <TASK> ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock().
Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dw... Reported-by: Imre Deak imre.deak@intel.com Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Keith Busch kbusch@kernel.org [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Tested-by: Hans de Goede hdegoede@redhat.com Tested-by: Kalle Valo kvalo@kernel.org Reviewed-by: Dave Jiang dave.jiang@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index cd759e19cc18e..df2ebd1f245a8 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5718,10 +5718,12 @@ static void pci_bus_lock(struct pci_bus *bus) { struct pci_dev *dev;
+ pci_dev_lock(bus->self); list_for_each_entry(dev, &bus->devices, bus_list) { - pci_dev_lock(dev); if (dev->subordinate) pci_bus_lock(dev->subordinate); + else + pci_dev_lock(dev); } }
@@ -5733,8 +5735,10 @@ static void pci_bus_unlock(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } + pci_dev_unlock(bus->self); }
/* Return 1 on successful lock, 0 on contention */ @@ -5742,15 +5746,15 @@ static int pci_bus_trylock(struct pci_bus *bus) { struct pci_dev *dev;
+ if (!pci_dev_trylock(bus->self)) + return 0; + list_for_each_entry(dev, &bus->devices, bus_list) { - if (!pci_dev_trylock(dev)) - goto unlock; if (dev->subordinate) { - if (!pci_bus_trylock(dev->subordinate)) { - pci_dev_unlock(dev); + if (!pci_bus_trylock(dev->subordinate)) goto unlock; - } - } + } else if (!pci_dev_trylock(dev)) + goto unlock; } return 1;
@@ -5758,8 +5762,10 @@ static int pci_bus_trylock(struct pci_bus *bus) list_for_each_entry_continue_reverse(dev, &bus->devices, bus_list) { if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } + pci_dev_unlock(bus->self); return 0; }
@@ -5791,9 +5797,10 @@ static void pci_slot_lock(struct pci_slot *slot) list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot != slot) continue; - pci_dev_lock(dev); if (dev->subordinate) pci_bus_lock(dev->subordinate); + else + pci_dev_lock(dev); } }
@@ -5819,14 +5826,13 @@ static int pci_slot_trylock(struct pci_slot *slot) list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot != slot) continue; - if (!pci_dev_trylock(dev)) - goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); goto unlock; } - } + } else if (!pci_dev_trylock(dev)) + goto unlock; } return 1;
@@ -5837,7 +5843,8 @@ static int pci_slot_trylock(struct pci_slot *slot) continue; if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } return 0; }
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 2f38cf730caedaeacdefb7ff35b0a3c1168117f9 ]
A malformed USB descriptor may pass the lengthy mixer description with a lot of channels, and this may overflow the 32bit integer shift size, as caught by syzbot UBSAN test. Although this won't cause any real trouble, it's better to address.
This patch introduces a sanity check of the number of channels to bail out the parsing when too many channels are found.
Reported-by: syzbot+78d5b129a762182225aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/0000000000000adac5061d3c7355@google.com Link: https://patch.msgid.link/20240715123619.26612-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 409fc11646948..fd6b94b3b6386 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2014,6 +2014,13 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, bmaControls = ftr->bmaControls; }
+ if (channels > 32) { + usb_audio_info(state->chip, + "usbmixer: too many channels (%d) in unit %d\n", + channels, unitid); + return -EINVAL; + } + /* parse the source unit */ err = parse_audio_unit(state, hdr->bSourceID); if (err < 0)
linux-stable-mirror@lists.linaro.org
-
Sasha Levin