4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steffen Weber steffen.weber@gmail.com

commit dc2db1dc5fb9ab3a43b305c2720fee5278dbee2a upstream.

If CONFIG_SCSI_SMARTPQI=y then don't build this driver as a module.

Signed-off-by: Steffen Weber steffen.weber@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/smartpqi/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/smartpqi/Makefile +++ b/drivers/scsi/smartpqi/Makefile @@ -1,3 +1,3 @@ ccflags-y += -I. -obj-m += smartpqi.o +obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi.o smartpqi-objs := smartpqi_init.o smartpqi_sis.o smartpqi_sas_transport.o

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn mike.marciniszyn@intel.com

commit 87b3524cb5058fdc7c2afdb92bdb2e079661ddc4 upstream.

This failure exists with qib:

ver_rc_compare_swap: mismatch, sequence 2, expected 123456789abcdef, got 0

The request builder was using the incorrect inlines to build the request header resulting in incorrect data in the atomic header.

Fix by using the appropriate inlines to create the request.

Fixes: 261a4351844b ("IB/qib,IB/hfi: Use core common header file") Reviewed-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Mike Marciniszyn mike.marciniszyn@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/qib/qib_rc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/qib/qib_rc.c +++ b/drivers/infiniband/hw/qib/qib_rc.c @@ -434,13 +434,13 @@ no_flow_control: qp->s_state = OP(COMPARE_SWAP); put_ib_ateth_swap(wqe->atomic_wr.swap, &ohdr->u.atomic_eth); - put_ib_ateth_swap(wqe->atomic_wr.compare_add, - &ohdr->u.atomic_eth); + put_ib_ateth_compare(wqe->atomic_wr.compare_add, + &ohdr->u.atomic_eth); } else { qp->s_state = OP(FETCH_ADD); put_ib_ateth_swap(wqe->atomic_wr.compare_add, &ohdr->u.atomic_eth); - put_ib_ateth_swap(0, &ohdr->u.atomic_eth); + put_ib_ateth_compare(0, &ohdr->u.atomic_eth); } put_ib_ateth_vaddr(wqe->atomic_wr.remote_addr, &ohdr->u.atomic_eth);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bart Van Assche bart.vanassche@wdc.com

commit 02ee9da347873699603d9ce0112a80b5dd69dea1 upstream.

Eliminate the WARN_ONs that create following two warnings when registering an rxe device:

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_register_device+0x591/0x640 [ib_core] Call Trace: rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core] Call Trace: ib_register_device+0x3f7/0x640 [ib_core] rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a

The code should accept either a parent pointer or a fully specified DMA specification without producing warnings.

Fixes: 99db9494035f ("IB/core: Remove ib_device.dma_device") Signed-off-by: Bart Van Assche bart.vanassche@wdc.com Cc: Leon Romanovsky leon@kernel.org Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/device.c | 20 ++++++++++++++------ drivers/infiniband/core/sysfs.c | 1 - 2 files changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -462,7 +462,6 @@ int ib_register_device(struct ib_device struct ib_udata uhw = {.outlen = 0, .inlen = 0}; struct device *parent = device->dev.parent;

- WARN_ON_ONCE(!parent); WARN_ON_ONCE(device->dma_device); if (device->dev.dma_ops) { /* @@ -471,16 +470,25 @@ int ib_register_device(struct ib_device * into device->dev. */ device->dma_device = &device->dev; - if (!device->dev.dma_mask) - device->dev.dma_mask = parent->dma_mask; - if (!device->dev.coherent_dma_mask) - device->dev.coherent_dma_mask = - parent->coherent_dma_mask; + if (!device->dev.dma_mask) { + if (parent) + device->dev.dma_mask = parent->dma_mask; + else + WARN_ON_ONCE(true); + } + if (!device->dev.coherent_dma_mask) { + if (parent) + device->dev.coherent_dma_mask = + parent->coherent_dma_mask; + else + WARN_ON_ONCE(true); + } } else { /* * The caller did not provide custom DMA operations. Use the * DMA mapping operations of the parent device. */ + WARN_ON_ONCE(!parent); device->dma_device = parent; }

--- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -1276,7 +1276,6 @@ int ib_device_register_sysfs(struct ib_d int ret; int i;

- WARN_ON_ONCE(!device->dev.parent); ret = dev_set_name(class_dev, "%s", device->name); if (ret) return ret;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael J. Ruhl michael.j.ruhl@intel.com

commit 2ff124d597c2df8696169ce0006fc974c49a4569 upstream.

The ev_file is an optional parameter for CQ creation. If the parameter is not passed, the ev_file pointer will be NULL. Using that pointer to set the cq_context will result in an OOPs.

Verify that ev_file is not NULL before using.

Cc: stable@vger.kernel.org # 4.14.x Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions") Reviewed-by: Dennis Dalessandro dennis.dalessandro@intel.com Reviewed-by: Ira Weiny ira.weiny@intel.com Signed-off-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/uverbs_std_types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/uverbs_std_types.c +++ b/drivers/infiniband/core/uverbs_std_types.c @@ -315,7 +315,7 @@ static int uverbs_create_cq_handler(stru cq->uobject = &obj->uobject; cq->comp_handler = ib_uverbs_comp_handler; cq->event_handler = ib_uverbs_cq_event_handler; - cq->cq_context = &ev_file->ev_queue; + cq->cq_context = ev_file ? &ev_file->ev_queue : NULL; obj->uobject.object = cq; obj->uobject.user_handle = user_handle; atomic_set(&cq->usecnt, 0);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann arnd@arndb.de

commit 4c1baad223906943b595a887305f2e8124821dad upstream.

Running the compaction_test sometimes results in out-of-memory failures. When I debugged this, it turned out that the code to reset the number of hugepages to the initial value is simply broken since we write into an open sysctl file descriptor multiple times without seeking back to the start.

Adding the lseek here fixes the problem.

Cc: stable@vger.kernel.org Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Link: https://bugs.linaro.org/show_bug.cgi?id=3145 Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Shuah Khan shuahkh@osg.samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/testing/selftests/vm/compaction_test.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/tools/testing/selftests/vm/compaction_test.c +++ b/tools/testing/selftests/vm/compaction_test.c @@ -137,6 +137,8 @@ int check_compaction(unsigned long mem_f printf("No of huge pages allocated = %d\n", (atoi(nr_hugepages)));

+ lseek(fd, 0, SEEK_SET); + if (write(fd, initial_nr_hugepages, strlen(initial_nr_hugepages)) != strlen(initial_nr_hugepages)) { perror("Failed to write value to /proc/sys/vm/nr_hugepages\n");

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bart Van Assche bart.vanassche@wdc.com

commit 65567e41219888feec72fee1de98ccf1efbbc16d upstream.

The rxe driver works as follows: * The send queue, receive queue and completion queues are implemented as circular buffers. * ib_post_send() and ib_post_recv() calls are serialized through a spinlock. * Removing elements from various queues happens from tasklet context. Tasklets are guaranteed to run on at most one CPU. This serializes access to these queues. See also rxe_completer(), rxe_requester() and rxe_responder(). * rxe_completer() processes the skbs queued onto qp->resp_pkts. * rxe_requester() handles the send queue (qp->sq.queue). * rxe_responder() processes the skbs queued onto qp->req_pkts.

Since rxe_drain_req_pkts() processes qp->req_pkts, calling rxe_drain_req_pkts() from rxe_requester() is racy. Hence this patch.

Reported-by: Moni Shoua monis@mellanox.com Signed-off-by: Bart Van Assche bart.vanassche@wdc.com Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/sw/rxe/rxe_loc.h | 1 - drivers/infiniband/sw/rxe/rxe_req.c | 9 +-------- drivers/infiniband/sw/rxe/rxe_resp.c | 2 +- 3 files changed, 2 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/sw/rxe/rxe_loc.h +++ b/drivers/infiniband/sw/rxe/rxe_loc.h @@ -237,7 +237,6 @@ int rxe_srq_from_attr(struct rxe_dev *rx

void rxe_release(struct kref *kref);

-void rxe_drain_req_pkts(struct rxe_qp *qp, bool notify); int rxe_completer(void *arg); int rxe_requester(void *arg); int rxe_responder(void *arg); --- a/drivers/infiniband/sw/rxe/rxe_req.c +++ b/drivers/infiniband/sw/rxe/rxe_req.c @@ -594,15 +594,8 @@ int rxe_requester(void *arg) rxe_add_ref(qp);

next_wqe: - if (unlikely(!qp->valid)) { - rxe_drain_req_pkts(qp, true); + if (unlikely(!qp->valid || qp->req.state == QP_STATE_ERROR)) goto exit; - } - - if (unlikely(qp->req.state == QP_STATE_ERROR)) { - rxe_drain_req_pkts(qp, true); - goto exit; - }

if (unlikely(qp->req.state == QP_STATE_RESET)) { qp->req.wqe_index = consumer_index(qp->sq.queue); --- a/drivers/infiniband/sw/rxe/rxe_resp.c +++ b/drivers/infiniband/sw/rxe/rxe_resp.c @@ -1210,7 +1210,7 @@ static enum resp_states do_class_d1e_err } }

-void rxe_drain_req_pkts(struct rxe_qp *qp, bool notify) +static void rxe_drain_req_pkts(struct rxe_qp *qp, bool notify) { struct sk_buff *skb;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shilpasri G Bhat shilpa.bhat@linux.vnet.ibm.com

commit 3fa4680b860bf48b437d6a2c039789c4abe202ae upstream.

Some OpenPOWER boxes can have same pstate values for nominal and pmin pstates. In these boxes the current code will not initialize 'powernv_pstate_info.min' variable and result in erroneous CPU frequency reporting. This patch fixes this problem.

Fixes: 09ca4c9b5958 (cpufreq: powernv: Replacing pstate_id with frequency table index) Reported-by: Alvin Wang wangat@tw.ibm.com Signed-off-by: Shilpasri G Bhat shilpa.bhat@linux.vnet.ibm.com Acked-by: Viresh Kumar viresh.kumar@linaro.org Cc: 4.8+ stable@vger.kernel.org # 4.8+ Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/cpufreq/powernv-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -288,9 +288,9 @@ next:

if (id == pstate_max) powernv_pstate_info.max = i; - else if (id == pstate_nominal) + if (id == pstate_nominal) powernv_pstate_info.nominal = i; - else if (id == pstate_min) + if (id == pstate_min) powernv_pstate_info.min = i;

if (powernv_pstate_info.wof_enabled && id == pstate_turbo) {

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Norris briannorris@chromium.org

commit a64e7a79dd6030479caad603c8d78e6c9c14904f upstream.

Commit b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") resolves races between driver reset and removal, but it introduces some new deadlock problems. If we see a timeout while we've already started suspending, removing, or shutting down the driver, we might see:

(a) a worker thread, running mwifiex_pcie_work() -> mwifiex_pcie_card_reset_work() -> pci_reset_function() (b) a removal thread, running mwifiex_pcie_remove() -> mwifiex_free_adapter() -> mwifiex_unregister() -> mwifiex_cleanup_pcie() -> cancel_work_sync(&card->work)

Unfortunately, mwifiex_pcie_remove() already holds the device lock that pci_reset_function() is now requesting, and so we see a deadlock.

It's necessary to cancel and synchronize our outstanding work before tearing down the driver, so we can't have this work wait indefinitely for the lock.

It's reasonable to only "try" to reset here, since this will mostly happen for cases where it's already difficult to reset the firmware anyway (e.g., while we're suspending or powering off the system). And if reset *really* needs to happen, we can always try again later.

Fixes: b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") Cc: stable@vger.kernel.org Cc: Xinming Hu huxm@marvell.com Signed-off-by: Brian Norris briannorris@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/wireless/marvell/mwifiex/pcie.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -2781,7 +2781,10 @@ static void mwifiex_pcie_card_reset_work { struct pcie_service_card *card = adapter->card;

- pci_reset_function(card->dev); + /* We can't afford to wait here; remove() might be waiting on us. If we + * can't grab the device lock, maybe we'll get another chance later. + */ + pci_try_reset_function(card->dev); }

static void mwifiex_pcie_work(struct work_struct *work)

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ravi Bangoria ravi.bangoria@linux.vnet.ibm.com

commit 0e4d819d0893dc043ea7b7cb6baf4be1e310bd96 upstream.

Recently, how the pointers being printed with %p has been changed by commit ad67b74d2469 ("printk: hash addresses printed with %p"). This is causing a regression while showing offset in the uprobe_events file. Instead of %p, use %px to display offset.

Before patch:

# perf probe -vv -x /tmp/a.out main Opening /sys/kernel/debug/tracing//uprobe_events write=1 Writing event: p:probe_a/main /tmp/a.out:0x58c

# cat /sys/kernel/debug/tracing/uprobe_events p:probe_a/main /tmp/a.out:0x0000000049a0f352

After patch:

# cat /sys/kernel/debug/tracing/uprobe_events p:probe_a/main /tmp/a.out:0x000000000000058c

Link: http://lkml.kernel.org/r/20180106054246.15375-1-ravi.bangoria@linux.vnet.ibm...

Cc: stable@vger.kernel.org Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Acked-by: Srikar Dronamraju srikar@linux.vnet.ibm.com Signed-off-by: Ravi Bangoria ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/trace/trace_uprobe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -608,7 +608,7 @@ static int probes_seq_show(struct seq_fi

/* Don't print "0x (null)" when offset is 0 */ if (tu->offset) { - seq_printf(m, "0x%p", (void *)tu->offset); + seq_printf(m, "0x%px", (void *)tu->offset); } else { switch (sizeof(void *)) { case 4:

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sukadev Bhattiprolu sukadev@linux.vnet.ibm.com

commit 384dfd627f1ee67d028e6f14c6e9bf5a1e2a7a24 upstream.

clear_thread_tidr() is called in interrupt context as a part of delayed put of the task structure (i.e as a part of timer interrupt). To prevent a deadlock, block interrupts when holding vas_thread_id_lock to set/ clear TIDR for a task.

Fixes: ec233ede4c86 ("powerpc: Add support for setting SPRN_TIDR") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Sukadev Bhattiprolu sukadev@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/powerpc/kernel/process.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1509,14 +1509,15 @@ static int assign_thread_tidr(void) { int index; int err; + unsigned long flags;

again: if (!ida_pre_get(&vas_thread_ida, GFP_KERNEL)) return -ENOMEM;

- spin_lock(&vas_thread_id_lock); + spin_lock_irqsave(&vas_thread_id_lock, flags); err = ida_get_new_above(&vas_thread_ida, 1, &index); - spin_unlock(&vas_thread_id_lock); + spin_unlock_irqrestore(&vas_thread_id_lock, flags);

if (err == -EAGAIN) goto again; @@ -1524,9 +1525,9 @@ again: return err;

if (index > MAX_THREAD_CONTEXT) { - spin_lock(&vas_thread_id_lock); + spin_lock_irqsave(&vas_thread_id_lock, flags); ida_remove(&vas_thread_ida, index); - spin_unlock(&vas_thread_id_lock); + spin_unlock_irqrestore(&vas_thread_id_lock, flags); return -ENOMEM; }

@@ -1535,9 +1536,11 @@ again:

static void free_thread_tidr(int id) { - spin_lock(&vas_thread_id_lock); + unsigned long flags; + + spin_lock_irqsave(&vas_thread_id_lock, flags); ida_remove(&vas_thread_ida, id); - spin_unlock(&vas_thread_id_lock); + spin_unlock_irqrestore(&vas_thread_id_lock, flags); }

/*

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nathan Fontenot nfont@linux.vnet.ibm.com

commit 1d9a090783bef19fe8cdec878620d22f05191316 upstream.

When DLPAR removing a CPU, the unmapping of the cpu from a node in unmap_cpu_from_node() should also invalidate the CPUs entry in the numa_cpu_lookup_table. There is not a guarantee that on a subsequent DLPAR add of the CPU the associativity will be the same and thus could be in a different node. Invalidating the entry in the numa_cpu_lookup_table causes the associativity to be read from the device tree at the time of the add.

The current behavior of not invalidating the CPUs entry in the numa_cpu_lookup_table can result in scenarios where the the topology layout of CPUs in the partition does not match the device tree or the topology reported by the HMC.

This bug looks like it was introduced in 2004 in the commit titled "ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the linux-fullhist tree. Hence tag it for all stable releases.

Cc: stable@vger.kernel.org Signed-off-by: Nathan Fontenot nfont@linux.vnet.ibm.com Reviewed-by: Tyrel Datwyler tyreld@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/powerpc/include/asm/topology.h | 5 +++++ arch/powerpc/mm/numa.c | 5 ----- arch/powerpc/platforms/pseries/hotplug-cpu.c | 2 ++ 3 files changed, 7 insertions(+), 5 deletions(-)

--- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -44,6 +44,11 @@ extern int sysfs_add_device_to_node(stru extern void sysfs_remove_device_from_node(struct device *dev, int nid); extern int numa_update_cpu_topology(bool cpus_locked);

+static inline void update_numa_cpu_lookup_table(unsigned int cpu, int node) +{ + numa_cpu_lookup_table[cpu] = node; +} + static inline int early_cpu_to_node(int cpu) { int nid; --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -142,11 +142,6 @@ static void reset_numa_cpu_lookup_table( numa_cpu_lookup_table[cpu] = -1; }

-static void update_numa_cpu_lookup_table(unsigned int cpu, int node) -{ - numa_cpu_lookup_table[cpu] = node; -} - static void map_cpu_to_node(int cpu, int node) { update_numa_cpu_lookup_table(cpu, node); --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -36,6 +36,7 @@ #include <asm/xics.h> #include <asm/xive.h> #include <asm/plpar_wrappers.h> +#include <asm/topology.h>

#include "pseries.h" #include "offline_states.h" @@ -331,6 +332,7 @@ static void pseries_remove_processor(str BUG_ON(cpu_online(cpu)); set_cpu_present(cpu, false); set_hard_smp_processor_id(cpu, -1); + update_numa_cpu_lookup_table(cpu, -1); break; } if (cpu >= nr_cpu_ids)

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eugene Syromiatnikov esyr@redhat.com

commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream.

For some reason, the implementation of some 16-bit ID system calls (namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast instead of low2highgid/low2highuid macros for converting [GU]IDs, which led to incorrect handling of value of -1 (which ought to be considered invalid).

Discovered by strace test suite.

Cc: stable@vger.kernel.org Signed-off-by: Eugene Syromiatnikov esyr@redhat.com Signed-off-by: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Martin Schwidefsky schwidefsky@de.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/s390/kernel/compat_linux.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -110,7 +110,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setregid16,

COMPAT_SYSCALL_DEFINE1(s390_setgid16, u16, gid) { - return sys_setgid((gid_t)gid); + return sys_setgid(low2highgid(gid)); }

COMPAT_SYSCALL_DEFINE2(s390_setreuid16, u16, ruid, u16, euid) @@ -120,7 +120,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setreuid16,

COMPAT_SYSCALL_DEFINE1(s390_setuid16, u16, uid) { - return sys_setuid((uid_t)uid); + return sys_setuid(low2highuid(uid)); }

COMPAT_SYSCALL_DEFINE3(s390_setresuid16, u16, ruid, u16, euid, u16, suid) @@ -173,12 +173,12 @@ COMPAT_SYSCALL_DEFINE3(s390_getresgid16,

COMPAT_SYSCALL_DEFINE1(s390_setfsuid16, u16, uid) { - return sys_setfsuid((uid_t)uid); + return sys_setfsuid(low2highuid(uid)); }

COMPAT_SYSCALL_DEFINE1(s390_setfsgid16, u16, gid) { - return sys_setfsgid((gid_t)gid); + return sys_setfsgid(low2highgid(gid)); }

static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann arnd@arndb.de

commit ca32e0c4bf9ca4b87089c5a5ce945e5f2ec890da upstream.

dtc warns about obviously incorrect GPIO numbers for the audio codec on both lpc32xx boards:

arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18

It looks like the nodes are written for a different binding that combines the GPIO number into a single number rather than a bank/number pair. I found the right numbers on stackexchange.com, so this patch fixes the warning and has a reasonable chance of getting things to actually work.

Cc: stable@vger.kernel.org Link: https://unix.stackexchange.com/questions/59497/alsa-asoc-how-to-correctly-lo... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/lpc3250-ea3250.dts | 4 ++-- arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -156,8 +156,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; };

--- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -81,8 +81,8 @@ uda1380: uda1380@18 { compatible = "nxp,uda1380"; reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; dac-clk = "wspll"; };

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann arnd@arndb.de

commit e8bfa0422469cdfc86be3f525f621b1d44d2481b upstream.

The clcd device is lacking an interrupt-parent property, which makes the interrupt unusable and shows up as a warning with the latest dtc version:

arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000 arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000

I looked up the old board files and found that this interrupt has the same irqchip as all the other on-chip device, it just needs one extra line.

Fixes: 17470b7da11c ("ARM: dts: add the CLCD LCD display to the NHK15") Reviewed-by: Linus Walleij linus.walleij@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -750,6 +750,7 @@ reg = <0x10120000 0x1000>; interrupt-names = "combined"; interrupts = <14>; + interrupt-parent = <&vica>; clocks = <&clcdclk>, <&hclkclcd>; clock-names = "clcdclk", "apb_pclk"; status = "disabled";

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Viresh Kumar viresh.kumar@linaro.org

commit 6ffb5b4f248fe53e0361b8cbc2a523b432566442 upstream.

The interrupt-parent of rtc was missing, add it.

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Olof Johansson olof@lixom.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/spear600.dtsi | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -194,6 +194,7 @@ rtc: rtc@fc900000 { compatible = "st,spear600-rtc"; reg = <0xfc900000 0x1000>; + interrupt-parent = <&vic0>; interrupts = <10>; status = "disabled"; };

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Viresh Kumar viresh.kumar@linaro.org

commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream.

This fixes the following warning by also sending the flags argument for gpio controllers:

Property 'cs-gpios', cell 6 is not a phandle reference in /ahb/apb/spi@e0100000

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Olof Johansson olof@lixom.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/spear1310-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -349,7 +349,7 @@ spi0: spi@e0100000 { status = "okay"; num-cs = <3>; - cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; + cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;

stmpe610@0 { compatible = "st,stmpe610";

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov kirill.shutemov@linux.intel.com

commit 5bf30316991d5bcda046343ee77d823cf16fdd03 upstream.

Currently kexec() will crash when switching into a 5-level paging enabled kernel.

I missed that we need to change relocate_kernel() to set CR4.LA57 flag if the kernel has 5-level paging enabled.

I avoided using #ifdef CONFIG_X86_5LEVEL here and inferred if we need to enable 5-level paging from previous CR4 value. This way the code is ready for boot-time switching between paging modes.

With this patch applied, in addition to kexec 4-to-4 which always worked, we can kexec 4-to-5 and 5-to-5 - while 5-to-4 will need more work.

Reported-by: Baoquan He bhe@redhat.com Signed-off-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Tested-by: Baoquan He bhe@redhat.com Cc: stable@vger.kernel.org # v4.14+ Cc: Borislav Petkov bp@suse.de Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-mm@kvack.org Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Link: http://lkml.kernel.org/r/20180129110845.26633-1-kirill.shutemov@linux.intel.... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/relocate_kernel_64.S | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -68,6 +68,9 @@ relocate_kernel: movq %cr4, %rax movq %rax, CR4(%r11)

+ /* Save CR4. Required to enable the right paging mode later. */ + movq %rax, %r13 + /* zero out flags, and disable interrupts */ pushq $0 popfq @@ -126,8 +129,13 @@ identity_mapped: /* * Set cr4 to a known state: * - physical address extension enabled + * - 5-level paging, if it was enabled before */ movl $X86_CR4_PAE, %eax + testq $X86_CR4_LA57, %r13 + jz 1f + orl $X86_CR4_LA57, %eax +1: movq %rax, %cr4

jmp 1f

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Hocko mhocko@suse.com

commit 9bb5a391f9a5707e04763cf14298fc4cc29bfecd upstream.

Bharata has noticed that onlining a newly added memory doesn't increase the total memory, pointing to commit f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") as a culprit. This commit has changed the way how the memory for memmaps is initialized and moves it from the allocation time to the initialization time. This works properly for the early memmap init path.

It doesn't work for the memory hotplug though because we need to mark page as reserved when the sparsemem section is created and later initialize it completely during onlining. memmap_init_zone is called in the early stage of onlining. With the current code it calls __init_single_page and as such it clears up the whole stage and therefore online_pages_range skips those pages.

Fix this by skipping mm_zero_struct_page in __init_single_page for memory hotplug path. This is quite uggly but unifying both early init and memory hotplug init paths is a large project. Make sure we plug the regression at least.

Link: http://lkml.kernel.org/r/20180130101141.GW21609@dhcp22.suse.cz Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Michal Hocko mhocko@suse.com Reported-by: Bharata B Rao bharata@linux.vnet.ibm.com Tested-by: Bharata B Rao bharata@linux.vnet.ibm.com Reviewed-by: Pavel Tatashin pasha.tatashin@oracle.com Cc: Steven Sistare steven.sistare@oracle.com Cc: Daniel Jordan daniel.m.jordan@oracle.com Cc: Bob Picco bob.picco@oracle.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/page_alloc.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)

--- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1177,9 +1177,10 @@ static void free_one_page(struct zone *z }

static void __meminit __init_single_page(struct page *page, unsigned long pfn, - unsigned long zone, int nid) + unsigned long zone, int nid, bool zero) { - mm_zero_struct_page(page); + if (zero) + mm_zero_struct_page(page); set_page_links(page, zone, nid, pfn); init_page_count(page); page_mapcount_reset(page); @@ -1194,9 +1195,9 @@ static void __meminit __init_single_page }

static void __meminit __init_single_pfn(unsigned long pfn, unsigned long zone, - int nid) + int nid, bool zero) { - return __init_single_page(pfn_to_page(pfn), pfn, zone, nid); + return __init_single_page(pfn_to_page(pfn), pfn, zone, nid, zero); }

#ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT @@ -1217,7 +1218,7 @@ static void __meminit init_reserved_page if (pfn >= zone->zone_start_pfn && pfn < zone_end_pfn(zone)) break; } - __init_single_pfn(pfn, zid, nid); + __init_single_pfn(pfn, zid, nid, true); } #else static inline void init_reserved_page(unsigned long pfn) @@ -1514,7 +1515,7 @@ static unsigned long __init deferred_ini page++; else page = pfn_to_page(pfn); - __init_single_page(page, pfn, zid, nid); + __init_single_page(page, pfn, zid, nid, true); cond_resched(); } } @@ -5393,15 +5394,20 @@ not_early: * can be created for invalid pages (for alignment) * check here not to call set_pageblock_migratetype() against * pfn out of zone. + * + * Please note that MEMMAP_HOTPLUG path doesn't clear memmap + * because this is done early in sparse_add_one_section */ if (!(pfn & (pageblock_nr_pages - 1))) { struct page *page = pfn_to_page(pfn);

- __init_single_page(page, pfn, zone, nid); + __init_single_page(page, pfn, zone, nid, + context != MEMMAP_HOTPLUG); set_pageblock_migratetype(page, MIGRATE_MOVABLE); cond_resched(); } else { - __init_single_pfn(pfn, zone, nid); + __init_single_pfn(pfn, zone, nid, + context != MEMMAP_HOTPLUG); } } }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Williams dan.j.williams@intel.com

commit 6b8cf5cc9965673951f1ab3f0e3cf23d06e3e2ee upstream.

At entry userspace may have populated registers with values that could otherwise be useful in a speculative execution attack. Clear them to minimize the kernel's attack surface.

Originally-From: Andi Kleen ak@linux.intel.com Signed-off-by: Dan Williams dan.j.williams@intel.com Cc: stable@vger.kernel.org Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Link: http://lkml.kernel.org/r/151787989697.7847.4083702787288600552.stgit@dwillia... [ Made small improvements to the changelog. ] Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/entry/entry_64_compat.S | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)

--- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -85,15 +85,25 @@ ENTRY(entry_SYSENTER_compat) pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ pushq $0 /* pt_regs->r8 = 0 */ + xorq %r8, %r8 /* nospec r8 */ pushq $0 /* pt_regs->r9 = 0 */ + xorq %r9, %r9 /* nospec r9 */ pushq $0 /* pt_regs->r10 = 0 */ + xorq %r10, %r10 /* nospec r10 */ pushq $0 /* pt_regs->r11 = 0 */ + xorq %r11, %r11 /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ + xorl %ebx, %ebx /* nospec rbx */ pushq %rbp /* pt_regs->rbp (will be overwritten) */ + xorl %ebp, %ebp /* nospec rbp */ pushq $0 /* pt_regs->r12 = 0 */ + xorq %r12, %r12 /* nospec r12 */ pushq $0 /* pt_regs->r13 = 0 */ + xorq %r13, %r13 /* nospec r13 */ pushq $0 /* pt_regs->r14 = 0 */ + xorq %r14, %r14 /* nospec r14 */ pushq $0 /* pt_regs->r15 = 0 */ + xorq %r15, %r15 /* nospec r15 */ cld

/* @@ -214,15 +224,25 @@ GLOBAL(entry_SYSCALL_compat_after_hwfram pushq %rbp /* pt_regs->cx (stashed in bp) */ pushq $-ENOSYS /* pt_regs->ax */ pushq $0 /* pt_regs->r8 = 0 */ + xorq %r8, %r8 /* nospec r8 */ pushq $0 /* pt_regs->r9 = 0 */ + xorq %r9, %r9 /* nospec r9 */ pushq $0 /* pt_regs->r10 = 0 */ + xorq %r10, %r10 /* nospec r10 */ pushq $0 /* pt_regs->r11 = 0 */ + xorq %r11, %r11 /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ + xorl %ebx, %ebx /* nospec rbx */ pushq %rbp /* pt_regs->rbp (will be overwritten) */ + xorl %ebp, %ebp /* nospec rbp */ pushq $0 /* pt_regs->r12 = 0 */ + xorq %r12, %r12 /* nospec r12 */ pushq $0 /* pt_regs->r13 = 0 */ + xorq %r13, %r13 /* nospec r13 */ pushq $0 /* pt_regs->r14 = 0 */ + xorq %r14, %r14 /* nospec r14 */ pushq $0 /* pt_regs->r15 = 0 */ + xorq %r15, %r15 /* nospec r15 */

/* * User mode is traced as though IRQs are on, and SYSENTER @@ -338,15 +358,25 @@ ENTRY(entry_INT80_compat) pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ pushq $0 /* pt_regs->r8 = 0 */ + xorq %r8, %r8 /* nospec r8 */ pushq $0 /* pt_regs->r9 = 0 */ + xorq %r9, %r9 /* nospec r9 */ pushq $0 /* pt_regs->r10 = 0 */ + xorq %r10, %r10 /* nospec r10 */ pushq $0 /* pt_regs->r11 = 0 */ + xorq %r11, %r11 /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ + xorl %ebx, %ebx /* nospec rbx */ pushq %rbp /* pt_regs->rbp */ + xorl %ebp, %ebp /* nospec rbp */ pushq %r12 /* pt_regs->r12 */ + xorq %r12, %r12 /* nospec r12 */ pushq %r13 /* pt_regs->r13 */ + xorq %r13, %r13 /* nospec r13 */ pushq %r14 /* pt_regs->r14 */ + xorq %r14, %r14 /* nospec r14 */ pushq %r15 /* pt_regs->r15 */ + xorq %r15, %r15 /* nospec r15 */ cld

/*

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Artem Savkov artem.savkov@gmail.com

commit dd78c832ffaf86eb6434e56de4bc3bc31f03f771 upstream.

According to crypto/rng.h generate function should return 0 on success and < 0 on error.

Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG") Signed-off-by: Artem Savkov artem.savkov@gmail.com Acked-by: Corentin Labbe clabbe.montjoie@gmail.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/sunxi-ss/sun4i-ss-prng.c +++ b/drivers/crypto/sunxi-ss/sun4i-ss-prng.c @@ -52,5 +52,5 @@ int sun4i_ss_prng_generate(struct crypto

writel(0, ss->base + SS_CTL); spin_unlock(&ss->slock); - return dlen; + return 0; }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Balbir Singh bsingharora@gmail.com

commit 4dd5f8a99e791a8c6500e3592f3ce81ae7edcde1 upstream.

This patch splits the linear mapping if the hot-unplug range is smaller than the mapping size. The code detects if the mapping needs to be split into a smaller size and if so, uses the stop machine infrastructure to clear the existing mapping and then remap the remaining range using a smaller page size.

The code will skip any region of the mapping that overlaps with kernel text and warn about it once. We don't want to remove a mapping where the kernel text and the LMB we intend to remove overlap in the same TLB mapping as it may affect the currently executing code.

I've tested these changes under a kvm guest with 2 vcpus, from a split mapping point of view, some of the caveats mentioned above applied to the testing I did.

Fixes: 4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()") Signed-off-by: Balbir Singh bsingharora@gmail.com [mpe: Tweak change log to match updated behaviour] Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/powerpc/mm/pgtable-radix.c | 95 +++++++++++++++++++++++++++++++--------- 1 file changed, 74 insertions(+), 21 deletions(-)

--- a/arch/powerpc/mm/pgtable-radix.c +++ b/arch/powerpc/mm/pgtable-radix.c @@ -17,6 +17,7 @@ #include <linux/of_fdt.h> #include <linux/mm.h> #include <linux/string_helpers.h> +#include <linux/stop_machine.h>

#include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -671,6 +672,30 @@ static void free_pmd_table(pmd_t *pmd_st pud_clear(pud); }

+struct change_mapping_params { + pte_t *pte; + unsigned long start; + unsigned long end; + unsigned long aligned_start; + unsigned long aligned_end; +}; + +static int stop_machine_change_mapping(void *data) +{ + struct change_mapping_params *params = + (struct change_mapping_params *)data; + + if (!data) + return -1; + + spin_unlock(&init_mm.page_table_lock); + pte_clear(&init_mm, params->aligned_start, params->pte); + create_physical_mapping(params->aligned_start, params->start); + create_physical_mapping(params->end, params->aligned_end); + spin_lock(&init_mm.page_table_lock); + return 0; +} + static void remove_pte_table(pte_t *pte_start, unsigned long addr, unsigned long end) { @@ -699,6 +724,52 @@ static void remove_pte_table(pte_t *pte_ } }

+/* + * clear the pte and potentially split the mapping helper + */ +static void split_kernel_mapping(unsigned long addr, unsigned long end, + unsigned long size, pte_t *pte) +{ + unsigned long mask = ~(size - 1); + unsigned long aligned_start = addr & mask; + unsigned long aligned_end = addr + size; + struct change_mapping_params params; + bool split_region = false; + + if ((end - addr) < size) { + /* + * We're going to clear the PTE, but not flushed + * the mapping, time to remap and flush. The + * effects if visible outside the processor or + * if we are running in code close to the + * mapping we cleared, we are in trouble. + */ + if (overlaps_kernel_text(aligned_start, addr) || + overlaps_kernel_text(end, aligned_end)) { + /* + * Hack, just return, don't pte_clear + */ + WARN_ONCE(1, "Linear mapping %lx->%lx overlaps kernel " + "text, not splitting\n", addr, end); + return; + } + split_region = true; + } + + if (split_region) { + params.pte = pte; + params.start = addr; + params.end = end; + params.aligned_start = addr & ~(size - 1); + params.aligned_end = min_t(unsigned long, aligned_end, + (unsigned long)__va(memblock_end_of_DRAM())); + stop_machine(stop_machine_change_mapping, &params, NULL); + return; + } + + pte_clear(&init_mm, addr, pte); +} + static void remove_pmd_table(pmd_t *pmd_start, unsigned long addr, unsigned long end) { @@ -714,13 +785,7 @@ static void remove_pmd_table(pmd_t *pmd_ continue;

if (pmd_huge(*pmd)) { - if (!IS_ALIGNED(addr, PMD_SIZE) || - !IS_ALIGNED(next, PMD_SIZE)) { - WARN_ONCE(1, "%s: unaligned range\n", __func__); - continue; - } - - pte_clear(&init_mm, addr, (pte_t *)pmd); + split_kernel_mapping(addr, end, PMD_SIZE, (pte_t *)pmd); continue; }

@@ -745,13 +810,7 @@ static void remove_pud_table(pud_t *pud_ continue;

if (pud_huge(*pud)) { - if (!IS_ALIGNED(addr, PUD_SIZE) || - !IS_ALIGNED(next, PUD_SIZE)) { - WARN_ONCE(1, "%s: unaligned range\n", __func__); - continue; - } - - pte_clear(&init_mm, addr, (pte_t *)pud); + split_kernel_mapping(addr, end, PUD_SIZE, (pte_t *)pud); continue; }

@@ -777,13 +836,7 @@ static void remove_pagetable(unsigned lo continue;

if (pgd_huge(*pgd)) { - if (!IS_ALIGNED(addr, PGDIR_SIZE) || - !IS_ALIGNED(next, PGDIR_SIZE)) { - WARN_ONCE(1, "%s: unaligned range\n", __func__); - continue; - } - - pte_clear(&init_mm, addr, (pte_t *)pgd); + split_kernel_mapping(addr, end, PGDIR_SIZE, (pte_t *)pgd); continue; }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Woodhouse dwmw@amazon.co.uk

commit 1751342095f0d2b36fa8114d8e12c5688c455ac4 upstream.

Intel have retroactively blessed the 0xc2 microcode on Skylake mobile and desktop parts, and the Gemini Lake 0x22 microcode is apparently fine too. We blacklisted the latter purely because it was present with all the other problematic ones in the 2018-01-08 release, but now it's explicitly listed as OK.

We still list 0x84 for the various Kaby Lake / Coffee Lake parts, as that appeared in one version of the blacklist and then reverted to 0x80 again. We can change it if 0x84 is actually announced to be safe.

Signed-off-by: David Woodhouse dwmw@amazon.co.uk Cc: Andy Lutomirski luto@kernel.org Cc: Arjan van de Ven arjan@linux.intel.com Cc: Borislav Petkov bp@alien8.de Cc: Dan Williams dan.j.williams@intel.com Cc: Dave Hansen dave.hansen@linux.intel.com Cc: David Woodhouse dwmw2@infradead.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: arjan.van.de.ven@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: sironi@amazon.de Link: http://lkml.kernel.org/r/1518305967-31356-2-git-send-email-dwmw@amazon.co.uk Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/cpu/intel.c | 4 ---- 1 file changed, 4 deletions(-)

--- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -123,8 +123,6 @@ static const struct sku_microcode spectr { INTEL_FAM6_KABYLAKE_MOBILE, 0x09, 0x84 }, { INTEL_FAM6_SKYLAKE_X, 0x03, 0x0100013e }, { INTEL_FAM6_SKYLAKE_X, 0x04, 0x0200003c }, - { INTEL_FAM6_SKYLAKE_MOBILE, 0x03, 0xc2 }, - { INTEL_FAM6_SKYLAKE_DESKTOP, 0x03, 0xc2 }, { INTEL_FAM6_BROADWELL_CORE, 0x04, 0x28 }, { INTEL_FAM6_BROADWELL_GT3E, 0x01, 0x1b }, { INTEL_FAM6_BROADWELL_XEON_D, 0x02, 0x14 }, @@ -136,8 +134,6 @@ static const struct sku_microcode spectr { INTEL_FAM6_HASWELL_X, 0x02, 0x3b }, { INTEL_FAM6_HASWELL_X, 0x04, 0x10 }, { INTEL_FAM6_IVYBRIDGE_X, 0x04, 0x42a }, - /* Updated in the 20180108 release; blacklist until we know otherwise */ - { INTEL_FAM6_ATOM_GEMINI_LAKE, 0x01, 0x22 }, /* Observed in the wild */ { INTEL_FAM6_SANDYBRIDGE_X, 0x06, 0x61b }, { INTEL_FAM6_SANDYBRIDGE_X, 0x07, 0x712 },

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Woodhouse dwmw@amazon.co.uk

commit f208820a321f9b23d77d7eed89945d862d62a3ed upstream.

This reverts commit 64e16720ea0879f8ab4547e3b9758936d483909b.

We cannot call C functions like that, without marking all the call-clobbered registers as, well, clobbered. We might have got away with it for now because the __ibp_barrier() function was *fairly* unlikely to actually use any other registers. But no. Just no.

Signed-off-by: David Woodhouse dwmw@amazon.co.uk Cc: Andy Lutomirski luto@kernel.org Cc: Arjan van de Ven arjan@linux.intel.com Cc: Borislav Petkov bp@alien8.de Cc: Dan Williams dan.j.williams@intel.com Cc: Dave Hansen dave.hansen@linux.intel.com Cc: David Woodhouse dwmw2@infradead.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: arjan.van.de.ven@intel.com Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: sironi@amazon.de Link: http://lkml.kernel.org/r/1518305967-31356-3-git-send-email-dwmw@amazon.co.uk Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/include/asm/nospec-branch.h | 13 +++++++++---- arch/x86/include/asm/processor.h | 3 --- arch/x86/kernel/cpu/bugs.c | 6 ------ 3 files changed, 9 insertions(+), 13 deletions(-)

--- a/arch/x86/include/asm/nospec-branch.h +++ b/arch/x86/include/asm/nospec-branch.h @@ -164,10 +164,15 @@ static inline void vmexit_fill_RSB(void)

static inline void indirect_branch_prediction_barrier(void) { - alternative_input("", - "call __ibp_barrier", - X86_FEATURE_USE_IBPB, - ASM_NO_INPUT_CLOBBER("eax", "ecx", "edx", "memory")); + asm volatile(ALTERNATIVE("", + "movl %[msr], %%ecx\n\t" + "movl %[val], %%eax\n\t" + "movl $0, %%edx\n\t" + "wrmsr", + X86_FEATURE_USE_IBPB) + : : [msr] "i" (MSR_IA32_PRED_CMD), + [val] "i" (PRED_CMD_IBPB) + : "eax", "ecx", "edx", "memory"); }

#endif /* __ASSEMBLY__ */ --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -969,7 +969,4 @@ bool xen_set_default_idle(void);

void stop_this_cpu(void *dummy); void df_debug(struct pt_regs *regs, long error_code); - -void __ibp_barrier(void); - #endif /* _ASM_X86_PROCESSOR_H */ --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -337,9 +337,3 @@ ssize_t cpu_show_spectre_v2(struct devic spectre_v2_module_string()); } #endif - -void __ibp_barrier(void) -{ - __wrmsr(MSR_IA32_PRED_CMD, PRED_CMD_IBPB, 0); -} -EXPORT_SYMBOL_GPL(__ibp_barrier);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lukas Wunner lukas@wunner.de

commit 433986c2c265d106d6a8e88006e0131fefc92b7b upstream.

Commit baa8809f6097 (PM / runtime: Optimize the use of device links) added an invocation of pm_runtime_drop_link() to __device_link_del(). However there are two variants of that function, one for CONFIG_SRCU and another for !CONFIG_SRCU, and the commit only modified the former.

Fixes: baa8809f6097 (PM / runtime: Optimize the use of device links) Cc: v4.10+ stable@vger.kernel.org # v4.10+ Signed-off-by: Lukas Wunner lukas@wunner.de Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/base/core.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -313,6 +313,9 @@ static void __device_link_del(struct dev dev_info(link->consumer, "Dropping the link to %s\n", dev_name(link->supplier));

+ if (link->flags & DL_FLAG_PM_RUNTIME) + pm_runtime_drop_link(link->consumer); + list_del(&link->s_node); list_del(&link->c_node); device_link_free(link);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Ryabinin aryabinin@virtuozzo.com

commit 6e1d8ea90932f77843730ada0bfea63093b7212a upstream.

wmi_dev_probe() allocates one byte less than necessary, thus subsequent sprintf() call writes trailing zero past the end of the 'buf':

BUG: KASAN: slab-out-of-bounds in vsnprintf+0xda4/0x1240 Write of size 1 at addr ffff880423529caf by task kworker/1:1/32

Call Trace: dump_stack+0xb3/0x14d print_address_description+0xd7/0x380 kasan_report+0x166/0x2b0 vsnprintf+0xda4/0x1240 sprintf+0x9b/0xd0 wmi_dev_probe+0x1c3/0x400 driver_probe_device+0x5d1/0x990 bus_for_each_drv+0x109/0x190 __device_attach+0x217/0x360 bus_probe_device+0x1ad/0x260 deferred_probe_work_func+0x10f/0x5d0 process_one_work+0xa8b/0x1dc0 worker_thread+0x20d/0x17d0 kthread+0x311/0x3d0 ret_from_fork+0x3a/0x50

Allocated by task 32: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x14f/0x3e0 wmi_dev_probe+0x182/0x400 driver_probe_device+0x5d1/0x990 bus_for_each_drv+0x109/0x190 __device_attach+0x217/0x360 bus_probe_device+0x1ad/0x260 deferred_probe_work_func+0x10f/0x5d0 process_one_work+0xa8b/0x1dc0 worker_thread+0x20d/0x17d0 kthread+0x311/0x3d0 ret_from_fork+0x3a/0x50

Increment allocation size to fix this.

Fixes: 44b6b7661132 ("platform/x86: wmi: create userspace interface for drivers") Signed-off-by: Andrey Ryabinin aryabinin@virtuozzo.com Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/platform/x86/wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -933,7 +933,7 @@ static int wmi_dev_probe(struct device * goto probe_failure; }

- buf = kmalloc(strlen(wdriver->driver.name) + 4, GFP_KERNEL); + buf = kmalloc(strlen(wdriver->driver.name) + 5, GFP_KERNEL); if (!buf) { ret = -ENOMEM; goto probe_string_failure;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit 2e3f0098bc45f710a2f4cbcc94b80a1fae7a99a1 upstream.

All current code paths call SAVE_C_REGS and then immediately SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV sequeneces properly.

While at it, remove the macros to save all except specific registers, as these macros have been unused for a long time.

Suggested-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180211104949.12992-2-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/entry/calling.h | 57 ++++++++++++---------------------------------- arch/x86/entry/entry_64.S | 12 +++------ 2 files changed, 19 insertions(+), 50 deletions(-)

--- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -101,49 +101,22 @@ For 32-bit we have the following convent addq $-(15*8), %rsp .endm

- .macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1 - .if \r11 - movq %r11, 6*8+\offset(%rsp) - .endif - .if \r8910 - movq %r10, 7*8+\offset(%rsp) - movq %r9, 8*8+\offset(%rsp) - movq %r8, 9*8+\offset(%rsp) - .endif - .if \rax - movq %rax, 10*8+\offset(%rsp) - .endif - .if \rcx - movq %rcx, 11*8+\offset(%rsp) - .endif - movq %rdx, 12*8+\offset(%rsp) - movq %rsi, 13*8+\offset(%rsp) + .macro SAVE_REGS offset=0 movq %rdi, 14*8+\offset(%rsp) - UNWIND_HINT_REGS offset=\offset extra=0 - .endm - .macro SAVE_C_REGS offset=0 - SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1 - .endm - .macro SAVE_C_REGS_EXCEPT_RAX_RCX offset=0 - SAVE_C_REGS_HELPER \offset, 0, 0, 1, 1 - .endm - .macro SAVE_C_REGS_EXCEPT_R891011 - SAVE_C_REGS_HELPER 0, 1, 1, 0, 0 - .endm - .macro SAVE_C_REGS_EXCEPT_RCX_R891011 - SAVE_C_REGS_HELPER 0, 1, 0, 0, 0 - .endm - .macro SAVE_C_REGS_EXCEPT_RAX_RCX_R11 - SAVE_C_REGS_HELPER 0, 0, 0, 1, 0 - .endm - - .macro SAVE_EXTRA_REGS offset=0 - movq %r15, 0*8+\offset(%rsp) - movq %r14, 1*8+\offset(%rsp) - movq %r13, 2*8+\offset(%rsp) - movq %r12, 3*8+\offset(%rsp) - movq %rbp, 4*8+\offset(%rsp) + movq %rsi, 13*8+\offset(%rsp) + movq %rdx, 12*8+\offset(%rsp) + movq %rcx, 11*8+\offset(%rsp) + movq %rax, 10*8+\offset(%rsp) + movq %r8, 9*8+\offset(%rsp) + movq %r9, 8*8+\offset(%rsp) + movq %r10, 7*8+\offset(%rsp) + movq %r11, 6*8+\offset(%rsp) movq %rbx, 5*8+\offset(%rsp) + movq %rbp, 4*8+\offset(%rsp) + movq %r12, 3*8+\offset(%rsp) + movq %r13, 2*8+\offset(%rsp) + movq %r14, 1*8+\offset(%rsp) + movq %r15, 0*8+\offset(%rsp) UNWIND_HINT_REGS offset=\offset .endm

@@ -197,7 +170,7 @@ For 32-bit we have the following convent * is just setting the LSB, which makes it an invalid stack address and is also * a signal to the unwinder that it's a pt_regs pointer in disguise. * - * NOTE: This macro must be used *after* SAVE_EXTRA_REGS because it corrupts + * NOTE: This macro must be used *after* SAVE_REGS because it corrupts * the original rbp. */ .macro ENCODE_FRAME_POINTER ptregs_offset=0 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -573,8 +573,7 @@ END(irq_entries_start) 1:

ALLOC_PT_GPREGS_ON_STACK - SAVE_C_REGS - SAVE_EXTRA_REGS + SAVE_REGS CLEAR_REGS_NOSPEC ENCODE_FRAME_POINTER

@@ -1132,8 +1131,7 @@ ENTRY(xen_failsafe_callback) UNWIND_HINT_IRET_REGS pushq $-1 /* orig_ax = -1 => not a system call */ ALLOC_PT_GPREGS_ON_STACK - SAVE_C_REGS - SAVE_EXTRA_REGS + SAVE_REGS CLEAR_REGS_NOSPEC ENCODE_FRAME_POINTER jmp error_exit @@ -1178,8 +1176,7 @@ idtentry machine_check do_mce has_err ENTRY(paranoid_entry) UNWIND_HINT_FUNC cld - SAVE_C_REGS 8 - SAVE_EXTRA_REGS 8 + SAVE_REGS 8 CLEAR_REGS_NOSPEC ENCODE_FRAME_POINTER 8 movl $1, %ebx @@ -1231,8 +1228,7 @@ END(paranoid_exit) ENTRY(error_entry) UNWIND_HINT_FUNC cld - SAVE_C_REGS 8 - SAVE_EXTRA_REGS 8 + SAVE_REGS 8 CLEAR_REGS_NOSPEC ENCODE_FRAME_POINTER 8 testb $3, CS+8(%rsp)

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit f7bafa2b05ef25eda1d9179fd930b0330cf2b7d1 upstream.

Same as is done for syscalls, interleave XOR with PUSH instructions for exceptions/interrupts, in order to minimize the cost of the additional instructions required for register clearing.

Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180211104949.12992-4-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/entry/calling.h | 40 +++++++++++++++++++--------------------- arch/x86/entry/entry_64.S | 30 +++++++++++++++++++++--------- 2 files changed, 40 insertions(+), 30 deletions(-)

--- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -101,44 +101,42 @@ For 32-bit we have the following convent addq $-(15*8), %rsp .endm

- .macro SAVE_REGS offset=0 + .macro SAVE_AND_CLEAR_REGS offset=0 + /* + * Save registers and sanitize registers of values that a + * speculation attack might otherwise want to exploit. The + * lower registers are likely clobbered well before they + * could be put to use in a speculative execution gadget. + * Interleave XOR with PUSH for better uop scheduling: + */ movq %rdi, 14*8+\offset(%rsp) movq %rsi, 13*8+\offset(%rsp) movq %rdx, 12*8+\offset(%rsp) movq %rcx, 11*8+\offset(%rsp) movq %rax, 10*8+\offset(%rsp) movq %r8, 9*8+\offset(%rsp) + xorq %r8, %r8 /* nospec r8 */ movq %r9, 8*8+\offset(%rsp) + xorq %r9, %r9 /* nospec r9 */ movq %r10, 7*8+\offset(%rsp) + xorq %r10, %r10 /* nospec r10 */ movq %r11, 6*8+\offset(%rsp) + xorq %r11, %r11 /* nospec r11 */ movq %rbx, 5*8+\offset(%rsp) + xorl %ebx, %ebx /* nospec rbx */ movq %rbp, 4*8+\offset(%rsp) + xorl %ebp, %ebp /* nospec rbp */ movq %r12, 3*8+\offset(%rsp) + xorq %r12, %r12 /* nospec r12 */ movq %r13, 2*8+\offset(%rsp) + xorq %r13, %r13 /* nospec r13 */ movq %r14, 1*8+\offset(%rsp) + xorq %r14, %r14 /* nospec r14 */ movq %r15, 0*8+\offset(%rsp) + xorq %r15, %r15 /* nospec r15 */ UNWIND_HINT_REGS offset=\offset .endm

- /* - * Sanitize registers of values that a speculation attack - * might otherwise want to exploit. The lower registers are - * likely clobbered well before they could be put to use in - * a speculative execution gadget: - */ - .macro CLEAR_REGS_NOSPEC - xorl %ebp, %ebp - xorl %ebx, %ebx - xorq %r8, %r8 - xorq %r9, %r9 - xorq %r10, %r10 - xorq %r11, %r11 - xorq %r12, %r12 - xorq %r13, %r13 - xorq %r14, %r14 - xorq %r15, %r15 - .endm - .macro POP_REGS pop_rdi=1 skip_r11rcx=0 popq %r15 popq %r14 @@ -177,7 +175,7 @@ For 32-bit we have the following convent * is just setting the LSB, which makes it an invalid stack address and is also * a signal to the unwinder that it's a pt_regs pointer in disguise. * - * NOTE: This macro must be used *after* SAVE_REGS because it corrupts + * NOTE: This macro must be used *after* SAVE_AND_CLEAR_REGS because it corrupts * the original rbp. */ .macro ENCODE_FRAME_POINTER ptregs_offset=0 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -565,8 +565,7 @@ END(irq_entries_start) 1:

ALLOC_PT_GPREGS_ON_STACK - SAVE_REGS - CLEAR_REGS_NOSPEC + SAVE_AND_CLEAR_REGS ENCODE_FRAME_POINTER

testb $3, CS(%rsp) @@ -1114,8 +1113,7 @@ ENTRY(xen_failsafe_callback) UNWIND_HINT_IRET_REGS pushq $-1 /* orig_ax = -1 => not a system call */ ALLOC_PT_GPREGS_ON_STACK - SAVE_REGS - CLEAR_REGS_NOSPEC + SAVE_AND_CLEAR_REGS ENCODE_FRAME_POINTER jmp error_exit END(xen_failsafe_callback) @@ -1159,8 +1157,7 @@ idtentry machine_check do_mce has_err ENTRY(paranoid_entry) UNWIND_HINT_FUNC cld - SAVE_REGS 8 - CLEAR_REGS_NOSPEC + SAVE_AND_CLEAR_REGS 8 ENCODE_FRAME_POINTER 8 movl $1, %ebx movl $MSR_GS_BASE, %ecx @@ -1211,8 +1208,7 @@ END(paranoid_exit) ENTRY(error_entry) UNWIND_HINT_FUNC cld - SAVE_REGS 8 - CLEAR_REGS_NOSPEC + SAVE_AND_CLEAR_REGS 8 ENCODE_FRAME_POINTER 8 testb $3, CS+8(%rsp) jz .Lerror_kernelspace @@ -1399,18 +1395,34 @@ ENTRY(nmi) pushq (%rdx) /* pt_regs->dx */ pushq %rcx /* pt_regs->cx */ pushq %rax /* pt_regs->ax */ + /* + * Sanitize registers of values that a speculation attack + * might otherwise want to exploit. The lower registers are + * likely clobbered well before they could be put to use in + * a speculative execution gadget. Interleave XOR with PUSH + * for better uop scheduling: + */ pushq %r8 /* pt_regs->r8 */ + xorq %r8, %r8 /* nospec r8 */ pushq %r9 /* pt_regs->r9 */ + xorq %r9, %r9 /* nospec r9 */ pushq %r10 /* pt_regs->r10 */ + xorq %r10, %r10 /* nospec r10 */ pushq %r11 /* pt_regs->r11 */ + xorq %r11, %r11 /* nospec r11*/ pushq %rbx /* pt_regs->rbx */ + xorl %ebx, %ebx /* nospec rbx*/ pushq %rbp /* pt_regs->rbp */ + xorl %ebp, %ebp /* nospec rbp*/ pushq %r12 /* pt_regs->r12 */ + xorq %r12, %r12 /* nospec r12*/ pushq %r13 /* pt_regs->r13 */ + xorq %r13, %r13 /* nospec r13*/ pushq %r14 /* pt_regs->r14 */ + xorq %r14, %r14 /* nospec r14*/ pushq %r15 /* pt_regs->r15 */ + xorq %r15, %r15 /* nospec r15*/ UNWIND_HINT_REGS - CLEAR_REGS_NOSPEC ENCODE_FRAME_POINTER

/*

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit 30907fd13bb593202574bb20af58d67c70a1ee14 upstream.

entry_SYSCALL_64_after_hwframe() and nmi() can be converted to use PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to the interleaving, the additional XOR-based clearing of R8 and R9 in entry_SYSCALL_64_after_hwframe() should not have any noticeable negative implications.

Suggested-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180211104949.12992-6-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/entry/calling.h | 6 ++-- arch/x86/entry/entry_64.S | 65 ++-------------------------------------------- 2 files changed, 6 insertions(+), 65 deletions(-)

--- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -137,7 +137,7 @@ For 32-bit we have the following convent UNWIND_HINT_REGS offset=\offset .endm

- .macro PUSH_AND_CLEAR_REGS + .macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax /* * Push registers and sanitize registers of values that a * speculation attack might otherwise want to exploit. The @@ -147,9 +147,9 @@ For 32-bit we have the following convent */ pushq %rdi /* pt_regs->di */ pushq %rsi /* pt_regs->si */ - pushq %rdx /* pt_regs->dx */ + pushq \rdx /* pt_regs->dx */ pushq %rcx /* pt_regs->cx */ - pushq %rax /* pt_regs->ax */ + pushq \rax /* pt_regs->ax */ pushq %r8 /* pt_regs->r8 */ xorq %r8, %r8 /* nospec r8 */ pushq %r9 /* pt_regs->r9 */ --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -227,35 +227,8 @@ ENTRY(entry_SYSCALL_64) pushq %rcx /* pt_regs->ip */ GLOBAL(entry_SYSCALL_64_after_hwframe) pushq %rax /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ - pushq %rsi /* pt_regs->si */ - pushq %rdx /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx */ - pushq $-ENOSYS /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ - pushq %r9 /* pt_regs->r9 */ - pushq %r10 /* pt_regs->r10 */ - /* - * Clear extra registers that a speculation attack might - * otherwise want to exploit. Interleave XOR with PUSH - * for better uop scheduling: - */ - xorq %r10, %r10 /* nospec r10 */ - pushq %r11 /* pt_regs->r11 */ - xorq %r11, %r11 /* nospec r11 */ - pushq %rbx /* pt_regs->rbx */ - xorl %ebx, %ebx /* nospec rbx */ - pushq %rbp /* pt_regs->rbp */ - xorl %ebp, %ebp /* nospec rbp */ - pushq %r12 /* pt_regs->r12 */ - xorq %r12, %r12 /* nospec r12 */ - pushq %r13 /* pt_regs->r13 */ - xorq %r13, %r13 /* nospec r13 */ - pushq %r14 /* pt_regs->r14 */ - xorq %r14, %r14 /* nospec r14 */ - pushq %r15 /* pt_regs->r15 */ - xorq %r15, %r15 /* nospec r15 */ - UNWIND_HINT_REGS + + PUSH_AND_CLEAR_REGS rax=$-ENOSYS

TRACE_IRQS_OFF

@@ -1388,39 +1361,7 @@ ENTRY(nmi) pushq 1*8(%rdx) /* pt_regs->rip */ UNWIND_HINT_IRET_REGS pushq $-1 /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ - pushq %rsi /* pt_regs->si */ - pushq (%rdx) /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx */ - pushq %rax /* pt_regs->ax */ - /* - * Sanitize registers of values that a speculation attack - * might otherwise want to exploit. The lower registers are - * likely clobbered well before they could be put to use in - * a speculative execution gadget. Interleave XOR with PUSH - * for better uop scheduling: - */ - pushq %r8 /* pt_regs->r8 */ - xorq %r8, %r8 /* nospec r8 */ - pushq %r9 /* pt_regs->r9 */ - xorq %r9, %r9 /* nospec r9 */ - pushq %r10 /* pt_regs->r10 */ - xorq %r10, %r10 /* nospec r10 */ - pushq %r11 /* pt_regs->r11 */ - xorq %r11, %r11 /* nospec r11*/ - pushq %rbx /* pt_regs->rbx */ - xorl %ebx, %ebx /* nospec rbx*/ - pushq %rbp /* pt_regs->rbp */ - xorl %ebp, %ebp /* nospec rbp*/ - pushq %r12 /* pt_regs->r12 */ - xorq %r12, %r12 /* nospec r12*/ - pushq %r13 /* pt_regs->r13 */ - xorq %r13, %r13 /* nospec r13*/ - pushq %r14 /* pt_regs->r14 */ - xorq %r14, %r14 /* nospec r14*/ - pushq %r15 /* pt_regs->r15 */ - xorq %r15, %r15 /* nospec r15*/ - UNWIND_HINT_REGS + PUSH_AND_CLEAR_REGS rdx=(%rdx) ENCODE_FRAME_POINTER

/*

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit 92816f571af81e9a71cc6f3dc8ce1e2fcdf7b6b8 upstream.

... same as the other macros in arch/x86/entry/calling.h

Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180211104949.12992-8-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/entry/calling.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -97,7 +97,7 @@ For 32-bit we have the following convent

#define SIZEOF_PTREGS 21*8

- .macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax +.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax /* * Push registers and sanitize registers of values that a * speculation attack might otherwise want to exploit. The @@ -131,9 +131,9 @@ For 32-bit we have the following convent pushq %r15 /* pt_regs->r15 */ xorq %r15, %r15 /* nospec r15*/ UNWIND_HINT_REGS - .endm +.endm

- .macro POP_REGS pop_rdi=1 skip_r11rcx=0 +.macro POP_REGS pop_rdi=1 skip_r11rcx=0 popq %r15 popq %r14 popq %r13 @@ -163,7 +163,7 @@ For 32-bit we have the following convent

.macro icebp .byte 0xf1 - .endm +.endm

/* * This is a sneaky trick to help the unwinder find pt_regs on the stack. The

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Borislav Petkov bp@suse.de

commit b498c261107461d5c42140dfddd05df83d8ca078 upstream.

That macro was touched around 2.5.8 times, judging by the full history linux repo, but it was unused even then. Get rid of it already.

Signed-off-by: Borislav Petkov bp@suse.de Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux@dominikbrodowski.net Link: http://lkml.kernel.org/r/20180212201318.GD14640@pd.tnic Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/entry/calling.h | 4 ---- 1 file changed, 4 deletions(-)

--- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -159,10 +159,6 @@ For 32-bit we have the following convent .if \pop_rdi popq %rdi .endif - .endm - - .macro icebp - .byte 0xf1 .endm

/*

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit d8e92de8ef952bed88c56c7a44c02d8dcae0984e upstream.

Replace a couple of magically connected buffer length literal constants with a common definition that makes their relationship obvious. Also document why our sscanf() usage is safe.

No intended functional changes.

Suggested-by: Ingo Molnar mingo@kernel.org Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andrew Lutomirski luto@kernel.org Cc: Andy Lutomirski luto@kernel.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Link: http://lkml.kernel.org/r/20180211205924.GA23210@light.dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/testing/selftests/x86/test_vdso.c | 11 ++++++++--- tools/testing/selftests/x86/test_vsyscall.c | 11 ++++++++--- 2 files changed, 16 insertions(+), 6 deletions(-)

--- a/tools/testing/selftests/x86/test_vdso.c +++ b/tools/testing/selftests/x86/test_vdso.c @@ -26,6 +26,9 @@ # endif #endif

+/* max length of lines in /proc/self/maps - anything longer is skipped here */ +#define MAPS_LINE_LEN 128 + int nerrs = 0;

typedef long (*getcpu_t)(unsigned *, unsigned *, void *); @@ -37,17 +40,19 @@ static void *vsyscall_getcpu(void) { #ifdef __x86_64__ FILE *maps; - char line[128]; + char line[MAPS_LINE_LEN]; bool found = false;

maps = fopen("/proc/self/maps", "r"); if (!maps) /* might still be present, but ignore it here, as we test vDSO not vsyscall */ return NULL;

- while (fgets(line, sizeof(line), maps)) { + while (fgets(line, MAPS_LINE_LEN, maps)) { char r, x; void *start, *end; - char name[128]; + char name[MAPS_LINE_LEN]; + + /* sscanf() is safe here as strlen(name) >= strlen(line) */ if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s", &start, &end, &r, &x, name) != 5) continue; --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -33,6 +33,9 @@ # endif #endif

+/* max length of lines in /proc/self/maps - anything longer is skipped here */ +#define MAPS_LINE_LEN 128 + static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), int flags) { @@ -98,7 +101,7 @@ static int init_vsys(void) #ifdef __x86_64__ int nerrs = 0; FILE *maps; - char line[128]; + char line[MAPS_LINE_LEN]; bool found = false;

maps = fopen("/proc/self/maps", "r"); @@ -108,10 +111,12 @@ static int init_vsys(void) return 0; }

- while (fgets(line, sizeof(line), maps)) { + while (fgets(line, MAPS_LINE_LEN, maps)) { char r, x; void *start, *end; - char name[128]; + char name[MAPS_LINE_LEN]; + + /* sscanf() is safe here as strlen(name) >= strlen(line) */ if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s", &start, &end, &r, &x, name) != 5) continue;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit 2cbc0d66de0480449c75636f55697c7ff3af61fc upstream.

On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled).

Without this patch, the move test may succeed, but the "int $0x80" causes a segfault, resulting in a false negative output of this self-test.

Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andy Lutomirski luto@kernel.org Cc: Dmitry Safonov dsafonov@virtuozzo.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Link: http://lkml.kernel.org/r/20180211111013.16888-4-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/testing/selftests/x86/test_mremap_vdso.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/tools/testing/selftests/x86/test_mremap_vdso.c +++ b/tools/testing/selftests/x86/test_mremap_vdso.c @@ -90,8 +90,12 @@ int main(int argc, char **argv, char **e vdso_size += PAGE_SIZE; }

+#ifdef __i386__ /* Glibc is likely to explode now - exit with raw syscall */ asm volatile ("int $0x80" : : "a" (__NR_exit), "b" (!!ret)); +#else /* __x86_64__ */ + syscall(SYS_exit, ret); +#endif } else { int status;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dominik Brodowski linux@dominikbrodowski.net

commit 4105c69703cdeba76f384b901712c9397b04e9c2 upstream.

On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80" test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build this test only if we can also build 32-bit binaries (which should be a good approximation for that).

Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Cc: Andy Lutomirski luto@kernel.org Cc: Dmitry Safonov dsafonov@virtuozzo.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Link: http://lkml.kernel.org/r/20180211111013.16888-5-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/testing/selftests/x86/Makefile | 2 ++ tools/testing/selftests/x86/single_step_syscall.c | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-)

--- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -30,11 +30,13 @@ CAN_BUILD_X86_64 := $(shell ./check_cc.s ifeq ($(CAN_BUILD_I386),1) all: all_32 TEST_PROGS += $(BINARIES_32) +EXTRA_CFLAGS += -DCAN_BUILD_32 endif

ifeq ($(CAN_BUILD_X86_64),1) all: all_64 TEST_PROGS += $(BINARIES_64) +EXTRA_CFLAGS += -DCAN_BUILD_64 endif

all_32: $(BINARIES_32) --- a/tools/testing/selftests/x86/single_step_syscall.c +++ b/tools/testing/selftests/x86/single_step_syscall.c @@ -119,7 +119,9 @@ static void check_result(void)

int main() { +#ifdef CAN_BUILD_32 int tmp; +#endif

sethandler(SIGTRAP, sigtrap, 0);

@@ -139,12 +141,13 @@ int main() : : "c" (post_nop) : "r11"); check_result(); #endif - +#ifdef CAN_BUILD_32 printf("[RUN]\tSet TF and check int80\n"); set_eflags(get_eflags() | X86_EFLAGS_TF); asm volatile ("int $0x80" : "=a" (tmp) : "a" (SYS_getpid) : INT80_CLOBBERS); check_result(); +#endif

/* * This test is particularly interesting if fast syscalls use

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf jpoimboe@redhat.com

commit fe24e27128252c230a34a6c628da2bf1676781ea upstream.

Peter Zijlstra's patch for converting WARN() to use UD2 triggered a bunch of false "unreachable instruction" warnings, which then triggered a seg fault in ignore_unreachable_insn().

The seg fault happened when it tried to dereference a NULL 'insn->func' pointer. Thanks to static_cpu_has(), some functions can jump to a non-function area in the .altinstr_aux section. That breaks ignore_unreachable_insn()'s assumption that it's always inside the original function.

Make sure ignore_unreachable_insn() only follows jumps within the current function.

Reported-by: Borislav Petkov bp@alien8.de Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Andy Lutomirski luto@kernel.org Cc: Arjan van de Ven arjan@linux.intel.com Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: kbuild test robot fengguang.wu@intel.com Link: http://lkml.kernel.org/r/bace77a60d5af9b45eddb8f8fb9c776c8de657ef.1518130694... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/objtool/check.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -1935,13 +1935,19 @@ static bool ignore_unreachable_insn(stru if (is_kasan_insn(insn) || is_ubsan_insn(insn)) return true;

- if (insn->type == INSN_JUMP_UNCONDITIONAL && insn->jump_dest) { - insn = insn->jump_dest; - continue; + if (insn->type == INSN_JUMP_UNCONDITIONAL) { + if (insn->jump_dest && + insn->jump_dest->func == insn->func) { + insn = insn->jump_dest; + continue; + } + + break; }

if (insn->offset + insn->len >= insn->func->offset + insn->func->len) break; + insn = list_next_entry(insn, list); }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra peterz@infradead.org

commit 3b3a371cc9bc980429baabe0a8e5f307f3d1f463 upstream.

Since the Intel SDM added an ModR/M byte to UD0 and binutils followed that specification, we now cannot disassemble our kernel anymore.

This now means Intel and AMD disagree on the encoding of UD0. And instead of playing games with additional bytes that are valid ModR/M and single byte instructions (0xd6 for instance), simply use UD2 for both WARN() and BUG().

Requested-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Acked-by: Linus Torvalds torvalds@linux-foundation.org Cc: Andy Lutomirski luto@kernel.org Cc: Arjan van de Ven arjan@linux.intel.com Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Link: http://lkml.kernel.org/r/20180208194406.GD25181@hirez.programming.kicks-ass.... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/include/asm/bug.h | 15 ++++++--------- arch/x86/kernel/traps.c | 2 +- 2 files changed, 7 insertions(+), 10 deletions(-)

--- a/arch/x86/include/asm/bug.h +++ b/arch/x86/include/asm/bug.h @@ -5,23 +5,20 @@ #include <linux/stringify.h>

/* - * Since some emulators terminate on UD2, we cannot use it for WARN. - * Since various instruction decoders disagree on the length of UD1, - * we cannot use it either. So use UD0 for WARN. + * Despite that some emulators terminate on UD2, we use it for WARN(). * - * (binutils knows about "ud1" but {en,de}codes it as 2 bytes, whereas - * our kernel decoder thinks it takes a ModRM byte, which seems consistent - * with various things like the Intel SDM instruction encoding rules) + * Since various instruction decoders/specs disagree on the encoding of + * UD0/UD1. */

-#define ASM_UD0 ".byte 0x0f, 0xff" +#define ASM_UD0 ".byte 0x0f, 0xff" /* + ModRM (for Intel) */ #define ASM_UD1 ".byte 0x0f, 0xb9" /* + ModRM */ #define ASM_UD2 ".byte 0x0f, 0x0b"

#define INSN_UD0 0xff0f #define INSN_UD2 0x0b0f

-#define LEN_UD0 2 +#define LEN_UD2 2

#ifdef CONFIG_GENERIC_BUG

@@ -79,7 +76,7 @@ do { \

#define __WARN_FLAGS(flags) \ do { \ - _BUG_FLAGS(ASM_UD0, BUGFLAG_WARNING|(flags)); \ + _BUG_FLAGS(ASM_UD2, BUGFLAG_WARNING|(flags)); \ annotate_reachable(); \ } while (0)

--- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -181,7 +181,7 @@ int fixup_bug(struct pt_regs *regs, int break;

case BUG_TRAP_TYPE_WARN: - regs->ip += LEN_UD0; + regs->ip += LEN_UD2; return 1; }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Will Deacon will.deacon@arm.com

commit 8fa80c503b484ddc1abbd10c7cb2ab81f3824a50 upstream.

For architectures providing their own implementation of array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to complain about out-of-range parameters using WARN_ON() results in a mess of mutually-dependent include files.

Rather than unpick the dependencies, simply have the core code in nospec.h perform the checking for us.

Signed-off-by: Will Deacon will.deacon@arm.com Acked-by: Thomas Gleixner tglx@linutronix.de Cc: Dan Williams dan.j.williams@intel.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Link: http://lkml.kernel.org/r/1517840166-15399-1-git-send-email-will.deacon@arm.c... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/linux/nospec.h | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-)

--- a/include/linux/nospec.h +++ b/include/linux/nospec.h @@ -20,20 +20,6 @@ static inline unsigned long array_index_ unsigned long size) { /* - * Warn developers about inappropriate array_index_nospec() usage. - * - * Even if the CPU speculates past the WARN_ONCE branch, the - * sign bit of @index is taken into account when generating the - * mask. - * - * This warning is compiled out when the compiler can infer that - * @index and @size are less than LONG_MAX. - */ - if (WARN_ONCE(index > LONG_MAX || size > LONG_MAX, - "array_index_nospec() limited to range of [0, LONG_MAX]\n")) - return 0; - - /* * Always calculate and emit the mask even if the compiler * thinks the mask is not needed. The compiler does not take * into account the value of @index under speculation. @@ -44,6 +30,26 @@ static inline unsigned long array_index_ #endif

/* + * Warn developers about inappropriate array_index_nospec() usage. + * + * Even if the CPU speculates past the WARN_ONCE branch, the + * sign bit of @index is taken into account when generating the + * mask. + * + * This warning is compiled out when the compiler can infer that + * @index and @size are less than LONG_MAX. + */ +#define array_index_mask_nospec_check(index, size) \ +({ \ + if (WARN_ONCE(index > LONG_MAX || size > LONG_MAX, \ + "array_index_nospec() limited to range of [0, LONG_MAX]\n")) \ + _mask = 0; \ + else \ + _mask = array_index_mask_nospec(index, size); \ + _mask; \ +}) + +/* * array_index_nospec - sanitize an array index after a bounds check * * For a code sequence like: @@ -61,7 +67,7 @@ static inline unsigned long array_index_ ({ \ typeof(index) _i = (index); \ typeof(size) _s = (size); \ - unsigned long _mask = array_index_mask_nospec(_i, _s); \ + unsigned long _mask = array_index_mask_nospec_check(_i, _s); \ \ BUILD_BUG_ON(sizeof(_i) > sizeof(long)); \ BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski luto@kernel.org

commit 1299ef1d8870d2d9f09a5aadf2f8b2c887c2d033 upstream.

flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious.

[ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ]

Signed-off-by: Andy Lutomirski luto@kernel.org Acked-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Boris Ostrovsky boris.ostrovsky@oracle.com Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Dave Hansen dave.hansen@intel.com Cc: Eduardo Valentin eduval@amazon.com Cc: Hugh Dickins hughd@google.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Juergen Gross jgross@suse.com Cc: Kees Cook keescook@google.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Linux-MM linux-mm@kvack.org Cc: Rik van Riel riel@redhat.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Will Deacon will.deacon@arm.com Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/include/asm/paravirt.h | 4 ++-- arch/x86/include/asm/paravirt_types.h | 2 +- arch/x86/include/asm/pgtable_32.h | 2 +- arch/x86/include/asm/tlbflush.h | 27 ++++++++++++++++++++------- arch/x86/kernel/paravirt.c | 6 +++--- arch/x86/mm/init_64.c | 2 +- arch/x86/mm/ioremap.c | 2 +- arch/x86/mm/kmmio.c | 2 +- arch/x86/mm/pgtable_32.c | 2 +- arch/x86/mm/tlb.c | 6 +++--- arch/x86/platform/uv/tlb_uv.c | 2 +- arch/x86/xen/mmu_pv.c | 6 +++--- include/trace/events/xen.h | 2 +- 13 files changed, 39 insertions(+), 26 deletions(-)

--- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -297,9 +297,9 @@ static inline void __flush_tlb_global(vo { PVOP_VCALL0(pv_mmu_ops.flush_tlb_kernel); } -static inline void __flush_tlb_single(unsigned long addr) +static inline void __flush_tlb_one_user(unsigned long addr) { - PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr); + PVOP_VCALL1(pv_mmu_ops.flush_tlb_one_user, addr); }

static inline void flush_tlb_others(const struct cpumask *cpumask, --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -217,7 +217,7 @@ struct pv_mmu_ops { /* TLB operations */ void (*flush_tlb_user)(void); void (*flush_tlb_kernel)(void); - void (*flush_tlb_single)(unsigned long addr); + void (*flush_tlb_one_user)(unsigned long addr); void (*flush_tlb_others)(const struct cpumask *cpus, const struct flush_tlb_info *info);

--- a/arch/x86/include/asm/pgtable_32.h +++ b/arch/x86/include/asm/pgtable_32.h @@ -61,7 +61,7 @@ void paging_init(void); #define kpte_clear_flush(ptep, vaddr) \ do { \ pte_clear(&init_mm, (vaddr), (ptep)); \ - __flush_tlb_one((vaddr)); \ + __flush_tlb_one_kernel((vaddr)); \ } while (0)

#endif /* !__ASSEMBLY__ */ --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -140,7 +140,7 @@ static inline unsigned long build_cr3_no #else #define __flush_tlb() __native_flush_tlb() #define __flush_tlb_global() __native_flush_tlb_global() -#define __flush_tlb_single(addr) __native_flush_tlb_single(addr) +#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr) #endif

static inline bool tlb_defer_switch_to_init_mm(void) @@ -400,7 +400,7 @@ static inline void __native_flush_tlb_gl /* * flush one page in the user mapping */ -static inline void __native_flush_tlb_single(unsigned long addr) +static inline void __native_flush_tlb_one_user(unsigned long addr) { u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);

@@ -437,18 +437,31 @@ static inline void __flush_tlb_all(void) /* * flush one page in the kernel mapping */ -static inline void __flush_tlb_one(unsigned long addr) +static inline void __flush_tlb_one_kernel(unsigned long addr) { count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); - __flush_tlb_single(addr); + + /* + * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its + * paravirt equivalent. Even with PCID, this is sufficient: we only + * use PCID if we also use global PTEs for the kernel mapping, and + * INVLPG flushes global translations across all address spaces. + * + * If PTI is on, then the kernel is mapped with non-global PTEs, and + * __flush_tlb_one_user() will flush the given address for the current + * kernel address space and for its usermode counterpart, but it does + * not flush it for other address spaces. + */ + __flush_tlb_one_user(addr);

if (!static_cpu_has(X86_FEATURE_PTI)) return;

/* - * __flush_tlb_single() will have cleared the TLB entry for this ASID, - * but since kernel space is replicated across all, we must also - * invalidate all others. + * See above. We need to propagate the flush to all other address + * spaces. In principle, we only need to propagate it to kernelmode + * address spaces, but the extra bookkeeping we would need is not + * worth it. */ invalidate_other_asid(); } --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -200,9 +200,9 @@ static void native_flush_tlb_global(void __native_flush_tlb_global(); }

-static void native_flush_tlb_single(unsigned long addr) +static void native_flush_tlb_one_user(unsigned long addr) { - __native_flush_tlb_single(addr); + __native_flush_tlb_one_user(addr); }

struct static_key paravirt_steal_enabled; @@ -401,7 +401,7 @@ struct pv_mmu_ops pv_mmu_ops __ro_after_

.flush_tlb_user = native_flush_tlb, .flush_tlb_kernel = native_flush_tlb_global, - .flush_tlb_single = native_flush_tlb_single, + .flush_tlb_one_user = native_flush_tlb_one_user, .flush_tlb_others = native_flush_tlb_others,

.pgd_alloc = __paravirt_pgd_alloc, --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -256,7 +256,7 @@ static void __set_pte_vaddr(pud_t *pud, * It's enough to flush this one mapping. * (PGE mappings get flushed as well) */ - __flush_tlb_one(vaddr); + __flush_tlb_one_kernel(vaddr); }

void set_pte_vaddr_p4d(p4d_t *p4d_page, unsigned long vaddr, pte_t new_pte) --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -820,5 +820,5 @@ void __init __early_set_fixmap(enum fixe set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags)); else pte_clear(&init_mm, addr, pte); - __flush_tlb_one(addr); + __flush_tlb_one_kernel(addr); } --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -168,7 +168,7 @@ static int clear_page_presence(struct km return -1; }

- __flush_tlb_one(f->addr); + __flush_tlb_one_kernel(f->addr); return 0; }

--- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -63,7 +63,7 @@ void set_pte_vaddr(unsigned long vaddr, * It's enough to flush this one mapping. * (PGE mappings get flushed as well) */ - __flush_tlb_one(vaddr); + __flush_tlb_one_kernel(vaddr); }

unsigned long __FIXADDR_TOP = 0xfffff000; --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -492,7 +492,7 @@ static void flush_tlb_func_common(const * flush that changes context.tlb_gen from 2 to 3. If they get * processed on this CPU in reverse order, we'll see * local_tlb_gen == 1, mm_tlb_gen == 3, and end != TLB_FLUSH_ALL. - * If we were to use __flush_tlb_single() and set local_tlb_gen to + * If we were to use __flush_tlb_one_user() and set local_tlb_gen to * 3, we'd be break the invariant: we'd update local_tlb_gen above * 1 without the full flush that's needed for tlb_gen 2. * @@ -513,7 +513,7 @@ static void flush_tlb_func_common(const

addr = f->start; while (addr < f->end) { - __flush_tlb_single(addr); + __flush_tlb_one_user(addr); addr += PAGE_SIZE; } if (local) @@ -660,7 +660,7 @@ static void do_kernel_range_flush(void *

/* flush range by one by one 'invlpg' */ for (addr = f->start; addr < f->end; addr += PAGE_SIZE) - __flush_tlb_one(addr); + __flush_tlb_one_kernel(addr); }

void flush_tlb_kernel_range(unsigned long start, unsigned long end) --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -299,7 +299,7 @@ static void bau_process_message(struct m local_flush_tlb(); stat->d_alltlb++; } else { - __flush_tlb_single(msg->address); + __flush_tlb_one_user(msg->address); stat->d_onetlb++; } stat->d_requestee++; --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -1300,12 +1300,12 @@ static void xen_flush_tlb(void) preempt_enable(); }

-static void xen_flush_tlb_single(unsigned long addr) +static void xen_flush_tlb_one_user(unsigned long addr) { struct mmuext_op *op; struct multicall_space mcs;

- trace_xen_mmu_flush_tlb_single(addr); + trace_xen_mmu_flush_tlb_one_user(addr);

preempt_disable();

@@ -2370,7 +2370,7 @@ static const struct pv_mmu_ops xen_mmu_o

.flush_tlb_user = xen_flush_tlb, .flush_tlb_kernel = xen_flush_tlb, - .flush_tlb_single = xen_flush_tlb_single, + .flush_tlb_one_user = xen_flush_tlb_one_user, .flush_tlb_others = xen_flush_tlb_others,

.pgd_alloc = xen_pgd_alloc, --- a/include/trace/events/xen.h +++ b/include/trace/events/xen.h @@ -368,7 +368,7 @@ TRACE_EVENT(xen_mmu_flush_tlb, TP_printk("%s", "") );

-TRACE_EVENT(xen_mmu_flush_tlb_single, +TRACE_EVENT(xen_mmu_flush_tlb_one_user, TP_PROTO(unsigned long addr), TP_ARGS(addr), TP_STRUCT__entry(

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jia Zhang qianyue.zj@alibaba-inc.com

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang qianyue.zj@alibaba-inc.com [ Updated it to more recent kernels. ] Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibab... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/events/intel/core.c | 2 +- arch/x86/events/intel/lbr.c | 2 +- arch/x86/events/intel/p6.c | 2 +- arch/x86/include/asm/acpi.h | 2 +- arch/x86/include/asm/processor.h | 2 +- arch/x86/kernel/amd_nb.c | 2 +- arch/x86/kernel/apic/apic.c | 6 +++--- arch/x86/kernel/asm-offsets_32.c | 2 +- arch/x86/kernel/cpu/amd.c | 28 ++++++++++++++-------------- arch/x86/kernel/cpu/centaur.c | 4 ++-- arch/x86/kernel/cpu/common.c | 8 ++++---- arch/x86/kernel/cpu/cyrix.c | 2 +- arch/x86/kernel/cpu/intel.c | 18 +++++++++--------- arch/x86/kernel/cpu/intel_rdt.c | 2 +- arch/x86/kernel/cpu/microcode/intel.c | 4 ++-- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- arch/x86/kernel/cpu/mtrr/main.c | 4 ++-- arch/x86/kernel/cpu/proc.c | 4 ++-- arch/x86/kernel/head_32.S | 4 ++-- arch/x86/kernel/mpparse.c | 2 +- arch/x86/lib/cpu.c | 2 +- drivers/char/hw_random/via-rng.c | 2 +- drivers/cpufreq/acpi-cpufreq.c | 2 +- drivers/cpufreq/longhaul.c | 6 +++--- drivers/cpufreq/p4-clockmod.c | 2 +- drivers/cpufreq/powernow-k7.c | 2 +- drivers/cpufreq/speedstep-centrino.c | 4 ++-- drivers/cpufreq/speedstep-lib.c | 6 +++--- drivers/crypto/padlock-aes.c | 2 +- drivers/edac/amd64_edac.c | 2 +- drivers/hwmon/coretemp.c | 6 +++--- drivers/hwmon/hwmon-vid.c | 2 +- drivers/hwmon/k10temp.c | 2 +- drivers/hwmon/k8temp.c | 2 +- drivers/video/fbdev/geode/video_gx.c | 2 +- 35 files changed, 73 insertions(+), 73 deletions(-)

--- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3559,7 +3559,7 @@ static int intel_snb_pebs_broken(int cpu break;

case INTEL_FAM6_SANDYBRIDGE_X: - switch (cpu_data(cpu).x86_mask) { + switch (cpu_data(cpu).x86_stepping) { case 6: rev = 0x618; break; case 7: rev = 0x70c; break; } --- a/arch/x86/events/intel/lbr.c +++ b/arch/x86/events/intel/lbr.c @@ -1186,7 +1186,7 @@ void __init intel_pmu_lbr_init_atom(void * on PMU interrupt */ if (boot_cpu_data.x86_model == 28 - && boot_cpu_data.x86_mask < 10) { + && boot_cpu_data.x86_stepping < 10) { pr_cont("LBR disabled due to erratum"); return; } --- a/arch/x86/events/intel/p6.c +++ b/arch/x86/events/intel/p6.c @@ -234,7 +234,7 @@ static __initconst const struct x86_pmu

static __init void p6_pmu_rdpmc_quirk(void) { - if (boot_cpu_data.x86_mask < 9) { + if (boot_cpu_data.x86_stepping < 9) { /* * PPro erratum 26; fixed in stepping 9 and above. */ --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -94,7 +94,7 @@ static inline unsigned int acpi_processo if (boot_cpu_data.x86 == 0x0F && boot_cpu_data.x86_vendor == X86_VENDOR_AMD && boot_cpu_data.x86_model <= 0x05 && - boot_cpu_data.x86_mask < 0x0A) + boot_cpu_data.x86_stepping < 0x0A) return 1; else if (boot_cpu_has(X86_BUG_AMD_APIC_C1E)) return 1; --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -91,7 +91,7 @@ struct cpuinfo_x86 { __u8 x86; /* CPU family */ __u8 x86_vendor; /* CPU vendor */ __u8 x86_model; - __u8 x86_mask; + __u8 x86_stepping; #ifdef CONFIG_X86_64 /* Number of 4K pages in DTLB/ITLB combined(in pages): */ int x86_tlbsize; --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -235,7 +235,7 @@ int amd_cache_northbridges(void) if (boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model >= 0x8 && (boot_cpu_data.x86_model > 0x9 || - boot_cpu_data.x86_mask >= 0x1)) + boot_cpu_data.x86_stepping >= 0x1)) amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE;

if (boot_cpu_data.x86 == 0x15) --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -546,7 +546,7 @@ static DEFINE_PER_CPU(struct clock_event

static u32 hsx_deadline_rev(void) { - switch (boot_cpu_data.x86_mask) { + switch (boot_cpu_data.x86_stepping) { case 0x02: return 0x3a; /* EP */ case 0x04: return 0x0f; /* EX */ } @@ -556,7 +556,7 @@ static u32 hsx_deadline_rev(void)

static u32 bdx_deadline_rev(void) { - switch (boot_cpu_data.x86_mask) { + switch (boot_cpu_data.x86_stepping) { case 0x02: return 0x00000011; case 0x03: return 0x0700000e; case 0x04: return 0x0f00000c; @@ -568,7 +568,7 @@ static u32 bdx_deadline_rev(void)

static u32 skx_deadline_rev(void) { - switch (boot_cpu_data.x86_mask) { + switch (boot_cpu_data.x86_stepping) { case 0x03: return 0x01000136; case 0x04: return 0x02000014; } --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -18,7 +18,7 @@ void foo(void) OFFSET(CPUINFO_x86, cpuinfo_x86, x86); OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor); OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model); - OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask); + OFFSET(CPUINFO_x86_stepping, cpuinfo_x86, x86_stepping); OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level); OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability); OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id); --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -119,7 +119,7 @@ static void init_amd_k6(struct cpuinfo_x return; }

- if (c->x86_model == 6 && c->x86_mask == 1) { + if (c->x86_model == 6 && c->x86_stepping == 1) { const int K6_BUG_LOOP = 1000000; int n; void (*f_vide)(void); @@ -149,7 +149,7 @@ static void init_amd_k6(struct cpuinfo_x

/* K6 with old style WHCR */ if (c->x86_model < 8 || - (c->x86_model == 8 && c->x86_mask < 8)) { + (c->x86_model == 8 && c->x86_stepping < 8)) { /* We can only write allocate on the low 508Mb */ if (mbytes > 508) mbytes = 508; @@ -168,7 +168,7 @@ static void init_amd_k6(struct cpuinfo_x return; }

- if ((c->x86_model == 8 && c->x86_mask > 7) || + if ((c->x86_model == 8 && c->x86_stepping > 7) || c->x86_model == 9 || c->x86_model == 13) { /* The more serious chips .. */

@@ -221,7 +221,7 @@ static void init_amd_k7(struct cpuinfo_x * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx * As per AMD technical note 27212 0.2 */ - if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { + if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) { rdmsr(MSR_K7_CLK_CTL, l, h); if ((l & 0xfff00000) != 0x20000000) { pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", @@ -241,12 +241,12 @@ static void init_amd_k7(struct cpuinfo_x * but they are not certified as MP capable. */ /* Athlon 660/661 is valid. */ - if ((c->x86_model == 6) && ((c->x86_mask == 0) || - (c->x86_mask == 1))) + if ((c->x86_model == 6) && ((c->x86_stepping == 0) || + (c->x86_stepping == 1))) return;

/* Duron 670 is valid */ - if ((c->x86_model == 7) && (c->x86_mask == 0)) + if ((c->x86_model == 7) && (c->x86_stepping == 0)) return;

/* @@ -256,8 +256,8 @@ static void init_amd_k7(struct cpuinfo_x * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for * more. */ - if (((c->x86_model == 6) && (c->x86_mask >= 2)) || - ((c->x86_model == 7) && (c->x86_mask >= 1)) || + if (((c->x86_model == 6) && (c->x86_stepping >= 2)) || + ((c->x86_model == 7) && (c->x86_stepping >= 1)) || (c->x86_model > 7)) if (cpu_has(c, X86_FEATURE_MP)) return; @@ -583,7 +583,7 @@ static void early_init_amd(struct cpuinf /* Set MTRR capability flag if appropriate */ if (c->x86 == 5) if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) + (c->x86_model == 8 && c->x86_stepping >= 8)) set_cpu_cap(c, X86_FEATURE_K6_MTRR); #endif #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI) @@ -769,7 +769,7 @@ static void init_amd_zn(struct cpuinfo_x * Fix erratum 1076: CPB feature bit not being set in CPUID. It affects * all up to and including B1. */ - if (c->x86_model <= 1 && c->x86_mask <= 1) + if (c->x86_model <= 1 && c->x86_stepping <= 1) set_cpu_cap(c, X86_FEATURE_CPB); }

@@ -880,11 +880,11 @@ static unsigned int amd_size_cache(struc /* AMD errata T13 (order #21922) */ if ((c->x86 == 6)) { /* Duron Rev A0 */ - if (c->x86_model == 3 && c->x86_mask == 0) + if (c->x86_model == 3 && c->x86_stepping == 0) size = 64; /* Tbird rev A1/A2 */ if (c->x86_model == 4 && - (c->x86_mask == 0 || c->x86_mask == 1)) + (c->x86_stepping == 0 || c->x86_stepping == 1)) size = 256; } return size; @@ -1021,7 +1021,7 @@ static bool cpu_has_amd_erratum(struct c }

/* OSVW unavailable or ID unknown, match family-model-stepping range */ - ms = (cpu->x86_model << 4) | cpu->x86_mask; + ms = (cpu->x86_model << 4) | cpu->x86_stepping; while ((range = *erratum++)) if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) && (ms >= AMD_MODEL_RANGE_START(range)) && --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -136,7 +136,7 @@ static void init_centaur(struct cpuinfo_ clear_cpu_cap(c, X86_FEATURE_TSC); break; case 8: - switch (c->x86_mask) { + switch (c->x86_stepping) { default: name = "2"; break; @@ -211,7 +211,7 @@ centaur_size_cache(struct cpuinfo_x86 *c * - Note, it seems this may only be in engineering samples. */ if ((c->x86 == 6) && (c->x86_model == 9) && - (c->x86_mask == 1) && (size == 65)) + (c->x86_stepping == 1) && (size == 65)) size -= 1; return size; } --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -731,7 +731,7 @@ void cpu_detect(struct cpuinfo_x86 *c) cpuid(0x00000001, &tfms, &misc, &junk, &cap0); c->x86 = x86_family(tfms); c->x86_model = x86_model(tfms); - c->x86_mask = x86_stepping(tfms); + c->x86_stepping = x86_stepping(tfms);

if (cap0 & (1<<19)) { c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; @@ -1186,7 +1186,7 @@ static void identify_cpu(struct cpuinfo_ c->loops_per_jiffy = loops_per_jiffy; c->x86_cache_size = -1; c->x86_vendor = X86_VENDOR_UNKNOWN; - c->x86_model = c->x86_mask = 0; /* So far unknown... */ + c->x86_model = c->x86_stepping = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ c->x86_model_id[0] = '\0'; /* Unset */ c->x86_max_cores = 1; @@ -1378,8 +1378,8 @@ void print_cpu_info(struct cpuinfo_x86 *

pr_cont(" (family: 0x%x, model: 0x%x", c->x86, c->x86_model);

- if (c->x86_mask || c->cpuid_level >= 0) - pr_cont(", stepping: 0x%x)\n", c->x86_mask); + if (c->x86_stepping || c->cpuid_level >= 0) + pr_cont(", stepping: 0x%x)\n", c->x86_stepping); else pr_cont(")\n"); } --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -215,7 +215,7 @@ static void init_cyrix(struct cpuinfo_x8

/* common case step number/rev -- exceptions handled below */ c->x86_model = (dir1 >> 4) + 1; - c->x86_mask = dir1 & 0xf; + c->x86_stepping = dir1 & 0xf;

/* Now cook; the original recipe is by Channing Corn, from Cyrix. * We do the same thing for each generation: we work out --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -146,7 +146,7 @@ static bool bad_spectre_microcode(struct

for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) { if (c->x86_model == spectre_bad_microcodes[i].model && - c->x86_mask == spectre_bad_microcodes[i].stepping) + c->x86_stepping == spectre_bad_microcodes[i].stepping) return (c->microcode <= spectre_bad_microcodes[i].microcode); } return false; @@ -193,7 +193,7 @@ static void early_init_intel(struct cpui * need the microcode to have already been loaded... so if it is * not, recommend a BIOS update and disable large pages. */ - if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 && + if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_stepping <= 2 && c->microcode < 0x20e) { pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n"); clear_cpu_cap(c, X86_FEATURE_PSE); @@ -209,7 +209,7 @@ static void early_init_intel(struct cpui

/* CPUID workaround for 0F33/0F34 CPU */ if (c->x86 == 0xF && c->x86_model == 0x3 - && (c->x86_mask == 0x3 || c->x86_mask == 0x4)) + && (c->x86_stepping == 0x3 || c->x86_stepping == 0x4)) c->x86_phys_bits = 36;

/* @@ -307,7 +307,7 @@ int ppro_with_ram_bug(void) if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 1 && - boot_cpu_data.x86_mask < 8) { + boot_cpu_data.x86_stepping < 8) { pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n"); return 1; } @@ -324,7 +324,7 @@ static void intel_smp_check(struct cpuin * Mask B, Pentium, but not Pentium MMX */ if (c->x86 == 5 && - c->x86_mask >= 1 && c->x86_mask <= 4 && + c->x86_stepping >= 1 && c->x86_stepping <= 4 && c->x86_model <= 3) { /* * Remember we have B step Pentia with bugs @@ -367,7 +367,7 @@ static void intel_workarounds(struct cpu * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until * model 3 mask 3 */ - if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) + if ((c->x86<<8 | c->x86_model<<4 | c->x86_stepping) < 0x633) clear_cpu_cap(c, X86_FEATURE_SEP);

/* @@ -385,7 +385,7 @@ static void intel_workarounds(struct cpu * P4 Xeon erratum 037 workaround. * Hardware prefetcher may cause stale data to be loaded into the cache. */ - if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { + if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_stepping == 1)) { if (msr_set_bit(MSR_IA32_MISC_ENABLE, MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) { pr_info("CPU: C0 stepping P4 Xeon detected.\n"); @@ -400,7 +400,7 @@ static void intel_workarounds(struct cpu * Specification Update"). */ if (boot_cpu_has(X86_FEATURE_APIC) && (c->x86<<8 | c->x86_model<<4) == 0x520 && - (c->x86_mask < 0x6 || c->x86_mask == 0xb)) + (c->x86_stepping < 0x6 || c->x86_stepping == 0xb)) set_cpu_bug(c, X86_BUG_11AP);

@@ -647,7 +647,7 @@ static void init_intel(struct cpuinfo_x8 case 6: if (l2 == 128) p = "Celeron (Mendocino)"; - else if (c->x86_mask == 0 || c->x86_mask == 5) + else if (c->x86_stepping == 0 || c->x86_stepping == 5) p = "Celeron-A"; break;

--- a/arch/x86/kernel/cpu/intel_rdt.c +++ b/arch/x86/kernel/cpu/intel_rdt.c @@ -771,7 +771,7 @@ static __init void rdt_quirks(void) cache_alloc_hsw_probe(); break; case INTEL_FAM6_SKYLAKE_X: - if (boot_cpu_data.x86_mask <= 4) + if (boot_cpu_data.x86_stepping <= 4) set_rdt_options("!cmt,!mbmtotal,!mbmlocal,!l3cat"); } } --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -921,7 +921,7 @@ static bool is_blacklisted(unsigned int */ if (c->x86 == 6 && c->x86_model == INTEL_FAM6_BROADWELL_X && - c->x86_mask == 0x01 && + c->x86_stepping == 0x01 && llc_size_per_core > 2621440 && c->microcode < 0x0b000021) { pr_err_once("Erratum BDF90: late loading with revision < 0x0b000021 (0x%x) disabled.\n", c->microcode); @@ -944,7 +944,7 @@ static enum ucode_state request_microcod return UCODE_NFOUND;

sprintf(name, "intel-ucode/%02x-%02x-%02x", - c->x86, c->x86_model, c->x86_mask); + c->x86, c->x86_model, c->x86_stepping);

if (request_firmware_direct(&firmware, name, device)) { pr_debug("data file %s load failed\n", name); --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -859,7 +859,7 @@ int generic_validate_add_page(unsigned l */ if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 1 && - boot_cpu_data.x86_mask <= 7) { + boot_cpu_data.x86_stepping <= 7) { if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) { pr_warn("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base); return -EINVAL; --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -711,8 +711,8 @@ void __init mtrr_bp_init(void) if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86 == 0xF && boot_cpu_data.x86_model == 0x3 && - (boot_cpu_data.x86_mask == 0x3 || - boot_cpu_data.x86_mask == 0x4)) + (boot_cpu_data.x86_stepping == 0x3 || + boot_cpu_data.x86_stepping == 0x4)) phys_addr = 36;

size_or_mask = SIZE_OR_MASK_BITS(phys_addr); --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -72,8 +72,8 @@ static int show_cpuinfo(struct seq_file c->x86_model, c->x86_model_id[0] ? c->x86_model_id : "unknown");

- if (c->x86_mask || c->cpuid_level >= 0) - seq_printf(m, "stepping\t: %d\n", c->x86_mask); + if (c->x86_stepping || c->cpuid_level >= 0) + seq_printf(m, "stepping\t: %d\n", c->x86_stepping); else seq_puts(m, "stepping\t: unknown\n"); if (c->microcode) --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -37,7 +37,7 @@ #define X86 new_cpu_data+CPUINFO_x86 #define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor #define X86_MODEL new_cpu_data+CPUINFO_x86_model -#define X86_MASK new_cpu_data+CPUINFO_x86_mask +#define X86_STEPPING new_cpu_data+CPUINFO_x86_stepping #define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math #define X86_CPUID new_cpu_data+CPUINFO_cpuid_level #define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability @@ -332,7 +332,7 @@ ENTRY(startup_32_smp) shrb $4,%al movb %al,X86_MODEL andb $0x0f,%cl # mask mask revision - movb %cl,X86_MASK + movb %cl,X86_STEPPING movl %edx,X86_CAPABILITY

.Lis486: --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -407,7 +407,7 @@ static inline void __init construct_defa processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01; processor.cpuflag = CPU_ENABLED; processor.cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping; processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX]; processor.reserved[0] = 0; processor.reserved[1] = 0; --- a/arch/x86/lib/cpu.c +++ b/arch/x86/lib/cpu.c @@ -18,7 +18,7 @@ unsigned int x86_model(unsigned int sig) { unsigned int fam, model;

- fam = x86_family(sig); + fam = x86_family(sig);

model = (sig >> 4) & 0xf;

--- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -162,7 +162,7 @@ static int via_rng_init(struct hwrng *rn /* Enable secondary noise source on CPUs where it is present. */

/* Nehemiah stepping 8 and higher */ - if ((c->x86_model == 9) && (c->x86_mask > 7)) + if ((c->x86_model == 9) && (c->x86_stepping > 7)) lo |= VIA_NOISESRC2;

/* Esther */ --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -629,7 +629,7 @@ static int acpi_cpufreq_blacklist(struct if (c->x86_vendor == X86_VENDOR_INTEL) { if ((c->x86 == 15) && (c->x86_model == 6) && - (c->x86_mask == 8)) { + (c->x86_stepping == 8)) { pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n"); return -ENODEV; } --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -775,7 +775,7 @@ static int longhaul_cpu_init(struct cpuf break;

case 7: - switch (c->x86_mask) { + switch (c->x86_stepping) { case 0: longhaul_version = TYPE_LONGHAUL_V1; cpu_model = CPU_SAMUEL2; @@ -787,7 +787,7 @@ static int longhaul_cpu_init(struct cpuf break; case 1 ... 15: longhaul_version = TYPE_LONGHAUL_V2; - if (c->x86_mask < 8) { + if (c->x86_stepping < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; } else { @@ -814,7 +814,7 @@ static int longhaul_cpu_init(struct cpuf numscales = 32; memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); - switch (c->x86_mask) { + switch (c->x86_stepping) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah A' [C5XLOE]"; --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -168,7 +168,7 @@ static int cpufreq_p4_cpu_init(struct cp #endif

/* Errata workaround */ - cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; + cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping; switch (cpuid) { case 0x0f07: case 0x0f0a: --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -131,7 +131,7 @@ static int check_powernow(void) return 0; }

- if ((c->x86_model == 6) && (c->x86_mask == 0)) { + if ((c->x86_model == 6) && (c->x86_stepping == 0)) { pr_info("K7 660[A0] core detected, enabling errata workarounds\n"); have_a0 = 1; } --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -37,7 +37,7 @@ struct cpu_id { __u8 x86; /* CPU family */ __u8 x86_model; /* model */ - __u8 x86_mask; /* stepping */ + __u8 x86_stepping; /* stepping */ };

enum { @@ -277,7 +277,7 @@ static int centrino_verify_cpu_id(const { if ((c->x86 == x->x86) && (c->x86_model == x->x86_model) && - (c->x86_mask == x->x86_mask)) + (c->x86_stepping == x->x86_stepping)) return 1; return 0; } --- a/drivers/cpufreq/speedstep-lib.c +++ b/drivers/cpufreq/speedstep-lib.c @@ -272,9 +272,9 @@ unsigned int speedstep_detect_processor( ebx = cpuid_ebx(0x00000001); ebx &= 0x000000FF;

- pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); + pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);

- switch (c->x86_mask) { + switch (c->x86_stepping) { case 4: /* * B-stepping [M-P4-M] @@ -361,7 +361,7 @@ unsigned int speedstep_detect_processor( msr_lo, msr_hi); if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { - if (c->x86_mask == 0x01) { + if (c->x86_stepping == 0x01) { pr_debug("early PIII version\n"); return SPEEDSTEP_CPU_PIII_C_EARLY; } else --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -512,7 +512,7 @@ static int __init padlock_init(void)

printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");

- if (c->x86 == 6 && c->x86_model == 15 && c->x86_mask == 2) { + if (c->x86 == 6 && c->x86_model == 15 && c->x86_stepping == 2) { ecb_fetch_blocks = MAX_ECB_FETCH_BLOCKS; cbc_fetch_blocks = MAX_CBC_FETCH_BLOCKS; printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n"); --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -3147,7 +3147,7 @@ static struct amd64_family_type *per_fam struct amd64_family_type *fam_type = NULL;

pvt->ext_model = boot_cpu_data.x86_model >> 4; - pvt->stepping = boot_cpu_data.x86_mask; + pvt->stepping = boot_cpu_data.x86_stepping; pvt->model = boot_cpu_data.x86_model; pvt->fam = boot_cpu_data.x86;

--- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -268,13 +268,13 @@ static int adjust_tjmax(struct cpuinfo_x for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) { const struct tjmax_model *tm = &tjmax_model_table[i]; if (c->x86_model == tm->model && - (tm->mask == ANY || c->x86_mask == tm->mask)) + (tm->mask == ANY || c->x86_stepping == tm->mask)) return tm->tjmax; }

/* Early chips have no MSR for TjMax */

- if (c->x86_model == 0xf && c->x86_mask < 4) + if (c->x86_model == 0xf && c->x86_stepping < 4) usemsr_ee = 0;

if (c->x86_model > 0xe && usemsr_ee) { @@ -425,7 +425,7 @@ static int chk_ucode_version(unsigned in * Readings might stop update when processor visited too deep sleep, * fixed for stepping D0 (6EC). */ - if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) { + if (c->x86_model == 0xe && c->x86_stepping < 0xc && c->microcode < 0x39) { pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n"); return -ENODEV; } --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -293,7 +293,7 @@ u8 vid_which_vrm(void) if (c->x86 < 6) /* Any CPU with family lower than 6 */ return 0; /* doesn't have VID */

- vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor); + vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_stepping, c->x86_vendor); if (vrm_ret == 134) vrm_ret = get_via_model_d_vrm(); if (vrm_ret == 0) --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -226,7 +226,7 @@ static bool has_erratum_319(struct pci_d * and AM3 formats, but that's the best we can do. */ return boot_cpu_data.x86_model < 4 || - (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2); + (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2); }

static int k10temp_probe(struct pci_dev *pdev, --- a/drivers/hwmon/k8temp.c +++ b/drivers/hwmon/k8temp.c @@ -187,7 +187,7 @@ static int k8temp_probe(struct pci_dev * return -ENOMEM;

model = boot_cpu_data.x86_model; - stepping = boot_cpu_data.x86_mask; + stepping = boot_cpu_data.x86_stepping;

/* feature available since SH-C0, exclude older revisions */ if ((model == 4 && stepping == 0) || --- a/drivers/video/fbdev/geode/video_gx.c +++ b/drivers/video/fbdev/geode/video_gx.c @@ -127,7 +127,7 @@ void gx_set_dclk_frequency(struct fb_inf int timeout = 1000;

/* Rev. 1 Geode GXs use a 14 MHz reference clock instead of 48 MHz. */ - if (cpu_data(0).x86_mask == 1) { + if (cpu_data(0).x86_stepping == 1) { pll_table = gx_pll_table_14MHz; pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz); } else {

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva garsilva@embeddedor.com

commit 24dbc6000f4b9b0ef5a9daecb161f1907733765a upstream.

Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead.

Suggested-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Gustavo A. R. Silva garsilva@embeddedor.com Cc: Borislav Petkov bp@alien8.de Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.com Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/include/asm/processor.h | 2 +- arch/x86/kernel/cpu/common.c | 2 +- arch/x86/kernel/cpu/microcode/intel.c | 2 +- arch/x86/kernel/cpu/proc.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-)

--- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -109,7 +109,7 @@ struct cpuinfo_x86 { char x86_vendor_id[16]; char x86_model_id[64]; /* in KB - valid for CPUS which support this call: */ - int x86_cache_size; + unsigned int x86_cache_size; int x86_cache_alignment; /* In bytes */ /* Cache QoS architectural values: */ int x86_cache_max_rmid; /* max index */ --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1184,7 +1184,7 @@ static void identify_cpu(struct cpuinfo_ int i;

c->loops_per_jiffy = loops_per_jiffy; - c->x86_cache_size = -1; + c->x86_cache_size = 0; c->x86_vendor = X86_VENDOR_UNKNOWN; c->x86_model = c->x86_stepping = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -982,7 +982,7 @@ static struct microcode_ops microcode_in

static int __init calc_llc_size_per_core(struct cpuinfo_x86 *c) { - u64 llc_size = c->x86_cache_size * 1024; + u64 llc_size = c->x86_cache_size * 1024ULL;

do_div(llc_size, c->x86_max_cores);

--- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -91,8 +91,8 @@ static int show_cpuinfo(struct seq_file }

/* Cache size */ - if (c->x86_cache_size >= 0) - seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); + if (c->x86_cache_size) + seq_printf(m, "cache size\t: %u KB\n", c->x86_cache_size);

show_cpuinfo_core(m, c, cpu); show_cpuinfo_misc(m, c);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ray Strode rstrode@redhat.com

commit 16c6db3688734b27487a42d0c2a1062d0b2bad03 upstream.

qxl_cursor_atomic_update allocs a bo for the cursor that it never frees up at the end of the function.

This commit fixes that.

Signed-off-by: Ray Strode rstrode@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie airlied@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/qxl/qxl_display.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -575,7 +575,7 @@ static void qxl_cursor_atomic_update(str struct qxl_cursor_cmd *cmd; struct qxl_cursor *cursor; struct drm_gem_object *obj; - struct qxl_bo *cursor_bo, *user_bo = NULL; + struct qxl_bo *cursor_bo = NULL, *user_bo = NULL; int ret; void *user_ptr; int size = 64*64*4; @@ -645,6 +645,8 @@ static void qxl_cursor_atomic_update(str qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false); qxl_release_fence_buffer_objects(release);

+ qxl_bo_unref(&cursor_bo); + return;

out_backoff:

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Grodzovsky andrey.grodzovsky@amd.com

commit adab595d16abe48e9c097f000bf8921d35b28fb7 upstream.

The handle describes kernel logical address, should be unsigned long and not uint32_t. Fixes KASAN error and GFP on driver unload.

Reviewed-by: Rex Zhu Rex.Zhu@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Andrey Grodzovsky andrey.grodzovsky@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h +++ b/drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h @@ -40,7 +40,7 @@ struct smu_table_entry { uint32_t table_addr_high; uint32_t table_addr_low; uint8_t *table; - uint32_t handle; + unsigned long handle; };

struct smu_table_array {

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keith Packard keithp@keithp.com

commit 761e05a702f5d537ffcca1ba933f9f0a968aa022 upstream.

Don't let a lessee control what the current DRM master is set to; that's the job of the "real" master. Otherwise, the lessee would disable all access to master operations for the owner and all lessees under it.

This matches the same check made in the SET_MASTER ioctl.

Signed-off-by: Keith Packard keithp@keithp.com Fixes: 2ed077e467ee ("drm: Add drm_object lease infrastructure [v5]") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20180119015159.1606-1-keithp@k... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/drm_auth.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/drm_auth.c +++ b/drivers/gpu/drm/drm_auth.c @@ -230,6 +230,12 @@ int drm_dropmaster_ioctl(struct drm_devi if (!dev->master) goto out_unlock;

+ if (file_priv->master->lessor != NULL) { + DRM_DEBUG_LEASE("Attempt to drop lessee %d as master\n", file_priv->master->lessee_id); + ret = -EINVAL; + goto out_unlock; + } + ret = 0; drm_drop_master(dev, file_priv); out_unlock:

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masayoshi Mizuma m.mizuma@jp.fujitsu.com

commit 295cc7eb314eb3321fb6d67ca6f7305f5c50d10f upstream.

When a physical CPU is hot-removed, the following warning messages are shown while the uncore device is removed in uncore_pci_remove():

WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988 uncore_pci_remove+0xf1/0x110 ... CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1 Workqueue: kacpi_hotplug acpi_hotplug_work_fn ... Call Trace: pci_device_remove+0x36/0xb0 device_release_driver_internal+0x145/0x210 pci_stop_bus_device+0x76/0xa0 pci_stop_root_bus+0x44/0x60 acpi_pci_root_remove+0x1f/0x80 acpi_bus_trim+0x54/0x90 acpi_bus_trim+0x2e/0x90 acpi_device_hotplug+0x2bc/0x4b0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x141/0x340 worker_thread+0x47/0x3e0 kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get the package ID to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesages are shown because topology_phys_to_logical_pkg() returns -1.

arch/x86/events/intel/uncore.c: static void uncore_pci_remove(struct pci_dev *pdev) { ... phys_id = uncore_pcibus_to_physid(pdev->bus); ... pkg = topology_phys_to_logical_pkg(phys_id); // returns -1 for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) { if (uncore_extra_pci_dev[pkg].dev[i] == pdev) { uncore_extra_pci_dev[pkg].dev[i] = NULL; break; } } WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); // <=========== HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

arch/x86/kernel/smpboot.c: int topology_phys_to_logical_pkg(unsigned int phys_pkg) { int cpu;

for_each_possible_cpu(cpu) { struct cpuinfo_x86 *c = &cpu_data(cpu);

if (c->initialized && c->phys_proc_id == phys_pkg) return c->logical_proc_id; } return -1; }

However, the phys_proc_id was already set to 0 by remove_siblinginfo() when the CPU was offlined.

So, topology_phys_to_logical_pkg() cannot find the correct logical_proc_id and always returns -1.

As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

What is worse is that the bogus 'pkg' index results in two bugs:

- We dereference uncore_extra_pci_dev[] with a negative index - We fail to clean up a stale pointer in uncore_extra_pci_dev[][]

To fix these bugs, remove the clearing of ->phys_proc_id from remove_siblinginfo().

This should not cause any problems, because ->phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

Signed-off-by: Masayoshi Mizuma m.mizuma@jp.fujitsu.com Acked-by: Thomas Gleixner tglx@linutronix.de Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: yasu.isimatu@gmail.com Cc: stable@vger.kernel.org Fixes: 30bb9811856f ("x86/topology: Avoid wasting 128k for package id array") Link: http://lkml.kernel.org/r/ed738d54-0f01-b38b-b794-c31dc118c207@gmail.com Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/smpboot.c | 1 - 1 file changed, 1 deletion(-)

--- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1431,7 +1431,6 @@ static void remove_siblinginfo(int cpu) cpumask_clear(cpu_llc_shared_mask(cpu)); cpumask_clear(topology_sibling_cpumask(cpu)); cpumask_clear(topology_core_cpumask(cpu)); - c->phys_proc_id = 0; c->cpu_core_id = 0; cpumask_clear_cpu(cpu, cpu_sibling_setup_mask); recompute_smt_state();

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Potapenko glider@google.com

commit 3876bbe27d04b848750d5310a37d6b76b593f648 upstream.

KMSAN reported use of uninitialized |entry->e_referenced| in a condition in mb_cache_shrink():

================================================================== BUG: KMSAN: use of uninitialized memory in mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 CPU: 2 PID: 816 Comm: kswapd1 Not tainted 4.11.0-rc5+ #2877 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 mb_cache_scan+0x67/0x80 fs/mbcache.c:321 do_shrink_slab mm/vmscan.c:397 [inline] shrink_slab+0xc3d/0x12d0 mm/vmscan.c:500 shrink_node+0x208f/0x2fd0 mm/vmscan.c:2603 kswapd_shrink_node mm/vmscan.c:3172 [inline] balance_pgdat mm/vmscan.c:3289 [inline] kswapd+0x160f/0x2850 mm/vmscan.c:3478 kthread+0x46c/0x5f0 kernel/kthread.c:230 ret_from_fork+0x29/0x40 arch/x86/entry/entry_64.S:430 chained origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_save_stack mm/kmsan/kmsan.c:317 [inline] kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547 __msan_store_shadow_origin_1+0xac/0x110 mm/kmsan/kmsan_instr.c:257 mb_cache_entry_create+0x3b3/0xc60 fs/mbcache.c:95 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337 kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766 mb_cache_entry_create+0x283/0xc60 fs/mbcache.c:86 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 ==================================================================

Signed-off-by: Alexander Potapenko glider@google.com Signed-off-by: Eric Biggers ebiggers@google.com Cc: stable@vger.kernel.org # v4.6 Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/mbcache.c | 1 + 1 file changed, 1 insertion(+)

--- a/fs/mbcache.c +++ b/fs/mbcache.c @@ -94,6 +94,7 @@ int mb_cache_entry_create(struct mb_cach entry->e_key = key; entry->e_value = value; entry->e_reusable = reusable; + entry->e_referenced = 0; head = mb_cache_entry_head(cache, key); hlist_bl_lock(head); hlist_bl_for_each_entry(dup, dup_node, head, e_hash_list) {

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jerome Brunet jbrunet@baylibre.com

commit fe0e58048f005fdce315eb4d185e5c160be4ac01 upstream.

This reverts commit 0a44697627d17a66d7dc98f17aeca07ca79c5c20.

This commit was initially intended to fix problems with hs200 and hs400 on some boards, mainly the odroid-c2. The OC2 (Rev 0.2) I have performs well in this modes, so I could not confirm these issues.

We've had several reports about the issues being still present on (some) OC2, so apparently, this change does not do what it was supposed to do. Maybe the eMMC signal quality is on the edge on the board. This may explain the variability we see in term of stability, but this is just a guess. Lowering the max_frequency to 100Mhz seems to do trick for those affected by the issue

Worse, the commit created new issues (CRC errors and hangs) on other boards, such as the kvim 1 and 2, the p200 or the libretech-cc.

According to amlogic, the Tx phase should not be tuned and left in its default configuration, so it is best to just revert the commit.

Fixes: 0a44697627d1 ("mmc: meson-gx: include tx phase in the tuning process") Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/mmc/host/meson-gx-mmc.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-)

--- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -716,22 +716,6 @@ static int meson_mmc_clk_phase_tuning(st static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct meson_host *host = mmc_priv(mmc); - int ret; - - /* - * If this is the initial tuning, try to get a sane Rx starting - * phase before doing the actual tuning. - */ - if (!mmc->doing_retune) { - ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); - - if (ret) - return ret; - } - - ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->tx_clk); - if (ret) - return ret;

return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); } @@ -762,9 +746,8 @@ static void meson_mmc_set_ios(struct mmc if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);

- /* Reset phases */ + /* Reset rx phase */ clk_set_phase(host->rx_clk, 0); - clk_set_phase(host->tx_clk, 270);

break;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tobin C. Harding me@tobin.cc

commit f69120ce6c024aa634a8fc25787205e42f0ccbe6 upstream.

Sphinx emits various (26) warnings when building make target 'htmldocs'. Currently struct definitions contain duplicate documentation, some as kernel-docs and some as standard c89 comments. We can reduce duplication while cleaning up the kernel docs.

Move all kernel-docs to right above each struct member. Use the set of all existing comments (kernel-doc and c89). Add documentation for missing struct members and function arguments.

Signed-off-by: Tobin C. Harding me@tobin.cc Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/jbd2/transaction.c | 5 include/linux/jbd2.h | 431 +++++++++++++++++++++++++++++++------------------- 2 files changed, 272 insertions(+), 164 deletions(-)

--- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -495,8 +495,10 @@ void jbd2_journal_free_reserved(handle_t EXPORT_SYMBOL(jbd2_journal_free_reserved);

/** - * int jbd2_journal_start_reserved(handle_t *handle) - start reserved handle + * int jbd2_journal_start_reserved() - start reserved handle * @handle: handle to start + * @type: for handle statistics + * @line_no: for handle statistics * * Start handle that has been previously reserved with jbd2_journal_reserve(). * This attaches @handle to the running transaction (or creates one if there's @@ -626,6 +628,7 @@ error_out: * int jbd2_journal_restart() - restart a handle . * @handle: handle to restart * @nblocks: nr credits requested + * @gfp_mask: memory allocation flags (for start_this_handle) * * Restart a handle for a multi-transaction filesystem * operation. --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -418,26 +418,41 @@ static inline void jbd_unlock_bh_journal #define JI_WAIT_DATA (1 << __JI_WAIT_DATA)

/** - * struct jbd_inode is the structure linking inodes in ordered mode - * present in a transaction so that we can sync them during commit. + * struct jbd_inode - The jbd_inode type is the structure linking inodes in + * ordered mode present in a transaction so that we can sync them during commit. */ struct jbd2_inode { - /* Which transaction does this inode belong to? Either the running - * transaction or the committing one. [j_list_lock] */ + /** + * @i_transaction: + * + * Which transaction does this inode belong to? Either the running + * transaction or the committing one. [j_list_lock] + */ transaction_t *i_transaction;

- /* Pointer to the running transaction modifying inode's data in case - * there is already a committing transaction touching it. [j_list_lock] */ + /** + * @i_next_transaction: + * + * Pointer to the running transaction modifying inode's data in case + * there is already a committing transaction touching it. [j_list_lock] + */ transaction_t *i_next_transaction;

- /* List of inodes in the i_transaction [j_list_lock] */ + /** + * @i_list: List of inodes in the i_transaction [j_list_lock] + */ struct list_head i_list;

- /* VFS inode this inode belongs to [constant during the lifetime - * of the structure] */ + /** + * @i_vfs_inode: + * + * VFS inode this inode belongs to [constant for lifetime of structure] + */ struct inode *i_vfs_inode;

- /* Flags of inode [j_list_lock] */ + /** + * @i_flags: Flags of inode [j_list_lock] + */ unsigned long i_flags; };

@@ -447,12 +462,20 @@ struct jbd2_revoke_table_s; * struct handle_s - The handle_s type is the concrete type associated with * handle_t. * @h_transaction: Which compound transaction is this update a part of? + * @h_journal: Which journal handle belongs to - used iff h_reserved set. + * @h_rsv_handle: Handle reserved for finishing the logical operation. * @h_buffer_credits: Number of remaining buffers we are allowed to dirty. - * @h_ref: Reference count on this handle - * @h_err: Field for caller's use to track errors through large fs operations - * @h_sync: flag for sync-on-close - * @h_jdata: flag to force data journaling - * @h_aborted: flag indicating fatal error on handle + * @h_ref: Reference count on this handle. + * @h_err: Field for caller's use to track errors through large fs operations. + * @h_sync: Flag for sync-on-close. + * @h_jdata: Flag to force data journaling. + * @h_reserved: Flag for handle for reserved credits. + * @h_aborted: Flag indicating fatal error on handle. + * @h_type: For handle statistics. + * @h_line_no: For handle statistics. + * @h_start_jiffies: Handle Start time. + * @h_requested_credits: Holds @h_buffer_credits after handle is started. + * @saved_alloc_context: Saved context while transaction is open. **/

/* Docbook can't yet cope with the bit fields, but will leave the documentation @@ -462,32 +485,23 @@ struct jbd2_revoke_table_s; struct jbd2_journal_handle { union { - /* Which compound transaction is this update a part of? */ transaction_t *h_transaction; /* Which journal handle belongs to - used iff h_reserved set */ journal_t *h_journal; };

- /* Handle reserved for finishing the logical operation */ handle_t *h_rsv_handle; - - /* Number of remaining buffers we are allowed to dirty: */ int h_buffer_credits; - - /* Reference count on this handle */ int h_ref; - - /* Field for caller's use to track errors through large fs */ - /* operations */ int h_err;

/* Flags [no locking] */ - unsigned int h_sync: 1; /* sync-on-close */ - unsigned int h_jdata: 1; /* force data journaling */ - unsigned int h_reserved: 1; /* handle with reserved credits */ - unsigned int h_aborted: 1; /* fatal error on handle */ - unsigned int h_type: 8; /* for handle statistics */ - unsigned int h_line_no: 16; /* for handle statistics */ + unsigned int h_sync: 1; + unsigned int h_jdata: 1; + unsigned int h_reserved: 1; + unsigned int h_aborted: 1; + unsigned int h_type: 8; + unsigned int h_line_no: 16;

unsigned long h_start_jiffies; unsigned int h_requested_credits; @@ -729,228 +743,253 @@ jbd2_time_diff(unsigned long start, unsi /** * struct journal_s - The journal_s type is the concrete type associated with * journal_t. - * @j_flags: General journaling state flags - * @j_errno: Is there an outstanding uncleared error on the journal (from a - * prior abort)? - * @j_sb_buffer: First part of superblock buffer - * @j_superblock: Second part of superblock buffer - * @j_format_version: Version of the superblock format - * @j_state_lock: Protect the various scalars in the journal - * @j_barrier_count: Number of processes waiting to create a barrier lock - * @j_barrier: The barrier lock itself - * @j_running_transaction: The current running transaction.. - * @j_committing_transaction: the transaction we are pushing to disk - * @j_checkpoint_transactions: a linked circular list of all transactions - * waiting for checkpointing - * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction - * to start committing, or for a barrier lock to be released - * @j_wait_done_commit: Wait queue for waiting for commit to complete - * @j_wait_commit: Wait queue to trigger commit - * @j_wait_updates: Wait queue to wait for updates to complete - * @j_wait_reserved: Wait queue to wait for reserved buffer credits to drop - * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints - * @j_head: Journal head - identifies the first unused block in the journal - * @j_tail: Journal tail - identifies the oldest still-used block in the - * journal. - * @j_free: Journal free - how many free blocks are there in the journal? - * @j_first: The block number of the first usable block - * @j_last: The block number one beyond the last usable block - * @j_dev: Device where we store the journal - * @j_blocksize: blocksize for the location where we store the journal. - * @j_blk_offset: starting block offset for into the device where we store the - * journal - * @j_fs_dev: Device which holds the client fs. For internal journal this will - * be equal to j_dev - * @j_reserved_credits: Number of buffers reserved from the running transaction - * @j_maxlen: Total maximum capacity of the journal region on disk. - * @j_list_lock: Protects the buffer lists and internal buffer state. - * @j_inode: Optional inode where we store the journal. If present, all journal - * block numbers are mapped into this inode via bmap(). - * @j_tail_sequence: Sequence number of the oldest transaction in the log - * @j_transaction_sequence: Sequence number of the next transaction to grant - * @j_commit_sequence: Sequence number of the most recently committed - * transaction - * @j_commit_request: Sequence number of the most recent transaction wanting - * commit - * @j_uuid: Uuid of client object. - * @j_task: Pointer to the current commit thread for this journal - * @j_max_transaction_buffers: Maximum number of metadata buffers to allow in a - * single compound commit transaction - * @j_commit_interval: What is the maximum transaction lifetime before we begin - * a commit? - * @j_commit_timer: The timer used to wakeup the commit thread - * @j_revoke_lock: Protect the revoke table - * @j_revoke: The revoke table - maintains the list of revoked blocks in the - * current transaction. - * @j_revoke_table: alternate revoke tables for j_revoke - * @j_wbuf: array of buffer_heads for jbd2_journal_commit_transaction - * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the - * number that will fit in j_blocksize - * @j_last_sync_writer: most recent pid which did a synchronous write - * @j_history_lock: Protect the transactions statistics history - * @j_proc_entry: procfs entry for the jbd statistics directory - * @j_stats: Overall statistics - * @j_private: An opaque pointer to fs-private information. - * @j_trans_commit_map: Lockdep entity to track transaction commit dependencies */ - struct journal_s { - /* General journaling state flags [j_state_lock] */ + /** + * @j_flags: General journaling state flags [j_state_lock] + */ unsigned long j_flags;

- /* + /** + * @j_errno: + * * Is there an outstanding uncleared error on the journal (from a prior * abort)? [j_state_lock] */ int j_errno;

- /* The superblock buffer */ + /** + * @j_sb_buffer: The first part of the superblock buffer. + */ struct buffer_head *j_sb_buffer; + + /** + * @j_superblock: The second part of the superblock buffer. + */ journal_superblock_t *j_superblock;

- /* Version of the superblock format */ + /** + * @j_format_version: Version of the superblock format. + */ int j_format_version;

- /* - * Protect the various scalars in the journal + /** + * @j_state_lock: Protect the various scalars in the journal. */ rwlock_t j_state_lock;

- /* + /** + * @j_barrier_count: + * * Number of processes waiting to create a barrier lock [j_state_lock] */ int j_barrier_count;

- /* The barrier lock itself */ + /** + * @j_barrier: The barrier lock itself. + */ struct mutex j_barrier;

- /* + /** + * @j_running_transaction: + * * Transactions: The current running transaction... * [j_state_lock] [caller holding open handle] */ transaction_t *j_running_transaction;

- /* + /** + * @j_committing_transaction: + * * the transaction we are pushing to disk * [j_state_lock] [caller holding open handle] */ transaction_t *j_committing_transaction;

- /* + /** + * @j_checkpoint_transactions: + * * ... and a linked circular list of all transactions waiting for * checkpointing. [j_list_lock] */ transaction_t *j_checkpoint_transactions;

- /* + /** + * @j_wait_transaction_locked: + * * Wait queue for waiting for a locked transaction to start committing, - * or for a barrier lock to be released + * or for a barrier lock to be released. */ wait_queue_head_t j_wait_transaction_locked;

- /* Wait queue for waiting for commit to complete */ + /** + * @j_wait_done_commit: Wait queue for waiting for commit to complete. + */ wait_queue_head_t j_wait_done_commit;

- /* Wait queue to trigger commit */ + /** + * @j_wait_commit: Wait queue to trigger commit. + */ wait_queue_head_t j_wait_commit;

- /* Wait queue to wait for updates to complete */ + /** + * @j_wait_updates: Wait queue to wait for updates to complete. + */ wait_queue_head_t j_wait_updates;

- /* Wait queue to wait for reserved buffer credits to drop */ + /** + * @j_wait_reserved: + * + * Wait queue to wait for reserved buffer credits to drop. + */ wait_queue_head_t j_wait_reserved;

- /* Semaphore for locking against concurrent checkpoints */ + /** + * @j_checkpoint_mutex: + * + * Semaphore for locking against concurrent checkpoints. + */ struct mutex j_checkpoint_mutex;

- /* + /** + * @j_chkpt_bhs: + * * List of buffer heads used by the checkpoint routine. This * was moved from jbd2_log_do_checkpoint() to reduce stack * usage. Access to this array is controlled by the - * j_checkpoint_mutex. [j_checkpoint_mutex] + * @j_checkpoint_mutex. [j_checkpoint_mutex] */ struct buffer_head *j_chkpt_bhs[JBD2_NR_BATCH]; - - /* + + /** + * @j_head: + * * Journal head: identifies the first unused block in the journal. * [j_state_lock] */ unsigned long j_head;

- /* + /** + * @j_tail: + * * Journal tail: identifies the oldest still-used block in the journal. * [j_state_lock] */ unsigned long j_tail;

- /* + /** + * @j_free: + * * Journal free: how many free blocks are there in the journal? * [j_state_lock] */ unsigned long j_free;

- /* - * Journal start and end: the block numbers of the first usable block - * and one beyond the last usable block in the journal. [j_state_lock] + /** + * @j_first: + * + * The block number of the first usable block in the journal + * [j_state_lock]. */ unsigned long j_first; + + /** + * @j_last: + * + * The block number one beyond the last usable block in the journal + * [j_state_lock]. + */ unsigned long j_last;

- /* - * Device, blocksize and starting block offset for the location where we - * store the journal. + /** + * @j_dev: Device where we store the journal. */ struct block_device *j_dev; + + /** + * @j_blocksize: Block size for the location where we store the journal. + */ int j_blocksize; + + /** + * @j_blk_offset: + * + * Starting block offset into the device where we store the journal. + */ unsigned long long j_blk_offset; + + /** + * @j_devname: Journal device name. + */ char j_devname[BDEVNAME_SIZE+24];

- /* + /** + * @j_fs_dev: + * * Device which holds the client fs. For internal journal this will be * equal to j_dev. */ struct block_device *j_fs_dev;

- /* Total maximum capacity of the journal region on disk. */ + /** + * @j_maxlen: Total maximum capacity of the journal region on disk. + */ unsigned int j_maxlen;

- /* Number of buffers reserved from the running transaction */ + /** + * @j_reserved_credits: + * + * Number of buffers reserved from the running transaction. + */ atomic_t j_reserved_credits;

- /* - * Protects the buffer lists and internal buffer state. + /** + * @j_list_lock: Protects the buffer lists and internal buffer state. */ spinlock_t j_list_lock;

- /* Optional inode where we store the journal. If present, all */ - /* journal block numbers are mapped into this inode via */ - /* bmap(). */ + /** + * @j_inode: + * + * Optional inode where we store the journal. If present, all + * journal block numbers are mapped into this inode via bmap(). + */ struct inode *j_inode;

- /* + /** + * @j_tail_sequence: + * * Sequence number of the oldest transaction in the log [j_state_lock] */ tid_t j_tail_sequence;

- /* + /** + * @j_transaction_sequence: + * * Sequence number of the next transaction to grant [j_state_lock] */ tid_t j_transaction_sequence;

- /* + /** + * @j_commit_sequence: + * * Sequence number of the most recently committed transaction * [j_state_lock]. */ tid_t j_commit_sequence;

- /* + /** + * @j_commit_request: + * * Sequence number of the most recent transaction wanting commit * [j_state_lock] */ tid_t j_commit_request;

- /* + /** + * @j_uuid: + * * Journal uuid: identifies the object (filesystem, LVM volume etc) * backed by this journal. This will eventually be replaced by an array * of uuids, allowing us to index multiple devices within a single @@ -958,85 +997,151 @@ struct journal_s */ __u8 j_uuid[16];

- /* Pointer to the current commit thread for this journal */ + /** + * @j_task: Pointer to the current commit thread for this journal. + */ struct task_struct *j_task;

- /* + /** + * @j_max_transaction_buffers: + * * Maximum number of metadata buffers to allow in a single compound - * commit transaction + * commit transaction. */ int j_max_transaction_buffers;

- /* + /** + * @j_commit_interval: + * * What is the maximum transaction lifetime before we begin a commit? */ unsigned long j_commit_interval;

- /* The timer used to wakeup the commit thread: */ + /** + * @j_commit_timer: The timer used to wakeup the commit thread. + */ struct timer_list j_commit_timer;

- /* - * The revoke table: maintains the list of revoked blocks in the - * current transaction. [j_revoke_lock] + /** + * @j_revoke_lock: Protect the revoke table. */ spinlock_t j_revoke_lock; + + /** + * @j_revoke: + * + * The revoke table - maintains the list of revoked blocks in the + * current transaction. + */ struct jbd2_revoke_table_s *j_revoke; + + /** + * @j_revoke_table: Alternate revoke tables for j_revoke. + */ struct jbd2_revoke_table_s *j_revoke_table[2];

- /* - * array of bhs for jbd2_journal_commit_transaction + /** + * @j_wbuf: Array of bhs for jbd2_journal_commit_transaction. */ struct buffer_head **j_wbuf; + + /** + * @j_wbufsize: + * + * Size of @j_wbuf array. + */ int j_wbufsize;

- /* - * this is the pid of hte last person to run a synchronous operation - * through the journal + /** + * @j_last_sync_writer: + * + * The pid of the last person to run a synchronous operation + * through the journal. */ pid_t j_last_sync_writer;

- /* - * the average amount of time in nanoseconds it takes to commit a + /** + * @j_average_commit_time: + * + * The average amount of time in nanoseconds it takes to commit a * transaction to disk. [j_state_lock] */ u64 j_average_commit_time;

- /* - * minimum and maximum times that we should wait for - * additional filesystem operations to get batched into a - * synchronous handle in microseconds + /** + * @j_min_batch_time: + * + * Minimum time that we should wait for additional filesystem operations + * to get batched into a synchronous handle in microseconds. */ u32 j_min_batch_time; + + /** + * @j_max_batch_time: + * + * Maximum time that we should wait for additional filesystem operations + * to get batched into a synchronous handle in microseconds. + */ u32 j_max_batch_time;

- /* This function is called when a transaction is closed */ + /** + * @j_commit_callback: + * + * This function is called when a transaction is closed. + */ void (*j_commit_callback)(journal_t *, transaction_t *);

/* * Journal statistics */ + + /** + * @j_history_lock: Protect the transactions statistics history. + */ spinlock_t j_history_lock; + + /** + * @j_proc_entry: procfs entry for the jbd statistics directory. + */ struct proc_dir_entry *j_proc_entry; + + /** + * @j_stats: Overall statistics. + */ struct transaction_stats_s j_stats;

- /* Failed journal commit ID */ + /** + * @j_failed_commit: Failed journal commit ID. + */ unsigned int j_failed_commit;

- /* + /** + * @j_private: + * * An opaque pointer to fs-private information. ext3 puts its - * superblock pointer here + * superblock pointer here. */ void *j_private;

- /* Reference to checksum algorithm driver via cryptoapi */ + /** + * @j_chksum_driver: + * + * Reference to checksum algorithm driver via cryptoapi. + */ struct crypto_shash *j_chksum_driver;

- /* Precomputed journal UUID checksum for seeding other checksums */ + /** + * @j_csum_seed: + * + * Precomputed journal UUID checksum for seeding other checksums. + */ __u32 j_csum_seed;

#ifdef CONFIG_DEBUG_LOCK_ALLOC - /* + /** + * @j_trans_commit_map: + * * Lockdep entity to track transaction commit dependencies. Handles * hold this "lock" for read, when we wait for commit, we acquire the * "lock" for writing. This matches the properties of jbd2 journalling

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhouyi Zhou zhouzhouyi@gmail.com

commit 06f29cc81f0350261f59643a505010531130eea0 upstream.

In the function __ext4_grp_locked_error(), __save_error_info() is called to save error info in super block block, but does not sync that information to disk to info the subsequence fsck after reboot.

This patch writes the error information to disk. After this patch, I think there is no obvious EXT4 error handle branches which leads to "Remounting filesystem read-only" will leave the disk partition miss the subsequence fsck.

Signed-off-by: Zhouyi Zhou zhouzhouyi@gmail.com Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/ext4/super.c | 1 + 1 file changed, 1 insertion(+)

--- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -742,6 +742,7 @@ __acquires(bitlock) }

ext4_unlock_group(sb, grp); + ext4_commit_super(sb, 1); ext4_handle_error(sb); /* * We only get here in the ERRORS_RO case; relocking the group

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Corentin Labbe clabbe.montjoie@gmail.com

commit 2e6522c565522a2e18409c315c49d78c8b74807b upstream.

MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does not exist.

Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig name. Note that BMIPS_GENERIC does the same which confirms that this patch is needed.

Fixes: eed0eabd12ef0 ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by: Corentin Labbe clabbe.montjoie@gmail.com Reviewed-by: James Hogan jhogan@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.9+ Patchwork: https://patchwork.linux-mips.org/patch/18495/ [jhogan@kernel.org: Clean up commit message] Signed-off-by: James Hogan jhogan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/mips/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -119,12 +119,12 @@ config MIPS_GENERIC select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_RELOCATABLE select SYS_SUPPORTS_SMARTMIPS - select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN - select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN - select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN - select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN - select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN - select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN + select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select USE_OF help Select this to build a kernel which aims to support multiple boards,

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marcin Nowakowski marcin.nowakowski@mips.com

commit 67a3ba25aa955198196f40b76b329b3ab9ad415a upstream.

Commit 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") added a fix to ensure that the memory range between PHYS_OFFSET and low memory address specified by mem= cmdline argument is not later processed by free_all_bootmem. This change was incorrect for systems where the commandline specifies more than 1 mem argument, as it will cause all memory between PHYS_OFFSET and each of the memory offsets to be marked as reserved, which results in parts of the RAM marked as reserved (Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0 mem=768M@0x30000000').

Change the behaviour to ensure that only the range between PHYS_OFFSET and the lowest start address of the memories is marked as protected.

This change also ensures that the range is marked protected even if it's only defined through the devicetree and not only via commandline arguments.

Reported-by: Mathieu Malaterre mathieu.malaterre@gmail.com Signed-off-by: Marcin Nowakowski marcin.nowakowski@mips.com Fixes: 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") Cc: Ralf Baechle ralf@linux-mips.org Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.11+ Tested-by: Mathieu Malaterre malat@debian.org Patchwork: https://patchwork.linux-mips.org/patch/18562/ Signed-off-by: James Hogan jhogan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/mips/kernel/setup.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -375,6 +375,7 @@ static void __init bootmem_init(void) unsigned long reserved_end; unsigned long mapstart = ~0UL; unsigned long bootmap_size; + phys_addr_t ramstart = (phys_addr_t)ULLONG_MAX; bool bootmap_valid = false; int i;

@@ -395,7 +396,8 @@ static void __init bootmem_init(void) max_low_pfn = 0;

/* - * Find the highest page frame number we have available. + * Find the highest page frame number we have available + * and the lowest used RAM address */ for (i = 0; i < boot_mem_map.nr_map; i++) { unsigned long start, end; @@ -407,6 +409,8 @@ static void __init bootmem_init(void) end = PFN_DOWN(boot_mem_map.map[i].addr + boot_mem_map.map[i].size);

+ ramstart = min(ramstart, boot_mem_map.map[i].addr); + #ifndef CONFIG_HIGHMEM /* * Skip highmem here so we get an accurate max_low_pfn if low @@ -436,6 +440,13 @@ static void __init bootmem_init(void) mapstart = max(reserved_end, start); }

+ /* + * Reserve any memory between the start of RAM and PHYS_OFFSET + */ + if (ramstart > PHYS_OFFSET) + add_memory_region(PHYS_OFFSET, ramstart - PHYS_OFFSET, + BOOT_MEM_RESERVED); + if (min_low_pfn >= max_low_pfn) panic("Incorrect memory mapping !!!"); if (min_low_pfn > ARCH_PFN_OFFSET) { @@ -664,9 +675,6 @@ static int __init early_parse_mem(char *

add_memory_region(start, size, BOOT_MEM_RAM);

- if (start && start > PHYS_OFFSET) - add_memory_region(PHYS_OFFSET, start - PHYS_OFFSET, - BOOT_MEM_RESERVED); return 0; } early_param("mem", early_parse_mem);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lukas Wunner lukas@wunner.de

commit 493fb50e958c1c6deef7feff0b8c3855def78d75 upstream.

Certain Thunderbolt 1 controllers claim to support Command Completed events (value of 0b in the No Command Completed Support field of the Slot Capabilities register) but in reality they neither set the Command Completed bit in the Slot Status register nor signal a Command Completed interrupt:

8086:1513 CV82524 [Light Ridge 4C 2010] 8086:151a DSL2310 [Eagle Ridge 2C 2011] 8086:151b CVL2510 [Light Peak 2C 2010] 8086:1547 DSL3510 [Cactus Ridge 4C 2012] 8086:1548 DSL3310 [Cactus Ridge 2C 2012] 8086:1549 DSL2210 [Port Ridge 1C 2011]

All known newer chips (Redwood Ridge and onwards) set No Command Completed Support, indicating that they do not support Command Completed events.

The user-visible impact is that after unplugging such a device, 2 seconds elapse until pciehp is unbound. That's because on ->remove, pcie_write_cmd() is called via pcie_disable_notification() and every call to pcie_write_cmd() takes 2 seconds (1 second for each invocation of pcie_wait_cmd()):

[ 337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago) [ 340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago)

That by itself has always been unpleasant, but the situation has become worse with commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown"): Now pciehp is unbound on ->shutdown. Because Thunderbolt controllers typically have 4 hotplug ports, every reboot and shutdown is now delayed by 8 seconds, plus another 2 seconds for every attached Thunderbolt 1 device.

Thunderbolt hotplug slots are not physical slots that one inserts cards into, but rather logical hotplug slots implemented in silicon. Devices appear beyond those logical slots once a PCI tunnel is established on top of the Thunderbolt Converged I/O switch. One would expect commands written to the Slot Control register to be executed immediately by the silicon, so for simplicity we always assume NoCompl+ for Thunderbolt ports.

Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") Tested-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Lukas Wunner lukas@wunner.de Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Cc: stable@vger.kernel.org # v4.12+ Cc: Sinan Kaya okaya@codeaurora.org Cc: Yehezkel Bernat yehezkel.bernat@intel.com Cc: Michael Jamet michael.jamet@intel.com Cc: Andreas Noever andreas.noever@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/pci/hotplug/pciehp_hpc.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -848,6 +848,13 @@ struct controller *pcie_init(struct pcie if (pdev->hotplug_user_indicators) slot_cap &= ~(PCI_EXP_SLTCAP_AIP | PCI_EXP_SLTCAP_PIP);

+ /* + * We assume no Thunderbolt controllers support Command Complete events, + * but some controllers falsely claim they do. + */ + if (pdev->is_thunderbolt) + slot_cap |= PCI_EXP_SLTCAP_NCCS; + ctrl->slot_cap = slot_cap; mutex_init(&ctrl->ctrl_lock); init_waitqueue_head(&ctrl->queue);

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold johan@kernel.org

commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream.

Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children.

To make things worse, the parent display node was also prematurely freed.

Note that the display and timings node references are never put after a successful dt-initialisation so the nodes would leak on later probe deferrals and on driver unbind.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport") Cc: stable stable@vger.kernel.org # 3.13 Cc: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com Cc: Nicolas Ferre nicolas.ferre@microchip.com Cc: Alexandre Belloni alexandre.belloni@free-electrons.com Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/video/fbdev/atmel_lcdfb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -1119,7 +1119,7 @@ static int atmel_lcdfb_of_init(struct at goto put_display_node; }

- timings_np = of_find_node_by_name(display_np, "display-timings"); + timings_np = of_get_child_by_name(display_np, "display-timings"); if (!timings_np) { dev_err(dev, "failed to find display-timings node\n"); ret = -ENODEV; @@ -1140,6 +1140,12 @@ static int atmel_lcdfb_of_init(struct at fb_add_videomode(&fb_vm, &info->modelist); }

+ /* + * FIXME: Make sure we are not referencing any fields in display_np + * and timings_np and drop our references to them before returning to + * avoid leaking the nodes on probe deferral and driver unbind. + */ + return 0;

put_timings_node:

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov idryomov@gmail.com

commit e573427a440fd67d3f522357d7ac901d59281948 upstream.

This feature bit restricts older clients from performing certain maintenance operations against an image (e.g. clone, snap create). krbd does not perform maintenance operations.

Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov idryomov@gmail.com Reviewed-by: Jason Dillaman dillaman@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/block/rbd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -124,11 +124,13 @@ static int atomic_dec_return_safe(atomic #define RBD_FEATURE_STRIPINGV2 (1ULL<<1) #define RBD_FEATURE_EXCLUSIVE_LOCK (1ULL<<2) #define RBD_FEATURE_DATA_POOL (1ULL<<7) +#define RBD_FEATURE_OPERATIONS (1ULL<<8)

#define RBD_FEATURES_ALL (RBD_FEATURE_LAYERING | \ RBD_FEATURE_STRIPINGV2 | \ RBD_FEATURE_EXCLUSIVE_LOCK | \ - RBD_FEATURE_DATA_POOL) + RBD_FEATURE_DATA_POOL | \ + RBD_FEATURE_OPERATIONS)

/* Features supported by this (client software) implementation. */

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joao Martins joao.m.martins@oracle.com

commit 29fee6eed2811ff1089b30fc579a2d19d78016ab upstream.

Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel.

struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */

/* Generally followed by nul-terminated string(s). */ };

Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value.

Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id.

Cc: stable@vger.kernel.org # 4.11 Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: Bhavesh Davda bhavesh.davda@oracle.com Signed-off-by: Joao Martins joao.m.martins@oracle.com Reviewed-by: Juergen Gross jgross@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/xen/xenbus/xenbus.h | 1 + drivers/xen/xenbus/xenbus_comms.c | 1 + drivers/xen/xenbus/xenbus_xs.c | 3 +++ 3 files changed, 5 insertions(+)

--- a/drivers/xen/xenbus/xenbus.h +++ b/drivers/xen/xenbus/xenbus.h @@ -76,6 +76,7 @@ struct xb_req_data { struct list_head list; wait_queue_head_t wq; struct xsd_sockmsg msg; + uint32_t caller_req_id; enum xsd_sockmsg_type type; char *body; const struct kvec *vec; --- a/drivers/xen/xenbus/xenbus_comms.c +++ b/drivers/xen/xenbus/xenbus_comms.c @@ -309,6 +309,7 @@ static int process_msg(void) goto out;

if (req->state == xb_req_state_wait_reply) { + req->msg.req_id = req->caller_req_id; req->msg.type = state.msg.type; req->msg.len = state.msg.len; req->body = state.body; --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -227,6 +227,8 @@ static void xs_send(struct xb_req_data * req->state = xb_req_state_queued; init_waitqueue_head(&req->wq);

+ /* Save the caller req_id and restore it later in the reply */ + req->caller_req_id = req->msg.req_id; req->msg.req_id = xs_request_enter(req);

mutex_lock(&xb_write_mutex); @@ -310,6 +312,7 @@ static void *xs_talkv(struct xenbus_tran req->num_vecs = num_vecs; req->cb = xs_wake_up;

+ msg.req_id = 0; msg.tx_id = t.id; msg.type = type; msg.len = 0;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) rostedt@goodmis.org

commit 07234021410bbc27b7c86c18de98616c29fbe667 upstream.

Al Viro reported:

For substring - sure, but what about something like "*a*b" and "a*b"? AFAICS, filter_parse_regex() ends up with identical results in both cases - MATCH_GLOB and *search = "a*b". And no way for the caller to tell one from another.

Testing this with the following:

# cd /sys/kernel/tracing # echo '*raw*lock' > set_ftrace_filter bash: echo: write error: Invalid argument

With this patch:

# echo '*raw*lock' > set_ftrace_filter # cat set_ftrace_filter _raw_read_trylock _raw_write_trylock _raw_read_unlock _raw_spin_unlock _raw_write_unlock _raw_spin_trylock _raw_spin_lock _raw_write_lock _raw_read_lock

Al recommended not setting the search buffer to skip the first '*' unless we know we are not using MATCH_GLOB. This implements his suggested logic.

Link: http://lkml.kernel.org/r/20180127170748.GF13338@ZenIV.linux.org.uk

Cc: stable@vger.kernel.org Fixes: 60f1d5e3bac44 ("ftrace: Support full glob matching") Reviewed-by: Masami Hiramatsu mhiramat@kernel.org Reported-by: Al Viro viro@ZenIV.linux.org.uk Suggsted-by: Al Viro viro@ZenIV.linux.org.uk Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/trace/trace_events_filter.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -400,7 +400,6 @@ enum regex_type filter_parse_regex(char for (i = 0; i < len; i++) { if (buff[i] == '*') { if (!i) { - *search = buff + 1; type = MATCH_END_ONLY; } else if (i == len - 1) { if (type == MATCH_END_ONLY) @@ -410,14 +409,14 @@ enum regex_type filter_parse_regex(char buff[i] = 0; break; } else { /* pattern continues, use full glob */ - type = MATCH_GLOB; - break; + return MATCH_GLOB; } } else if (strchr("[?\", buff[i])) { - type = MATCH_GLOB; - break; + return MATCH_GLOB; } } + if (buff[0] == '*') + *search = buff + 1;

return type; }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Larry Finger Larry.Finger@lwfinger.net

commit c713fb071edc0efc01a955f65a006b0e1795d2eb upstream.

There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75 ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem").

Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih pkshih@realtek.com, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary.

Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable stable@vger.kernel.org # 4.14+ Fix-suggested-by: Pkshih pkshih@realtek.com Signed-off-by: Larry Finger Larry.Finger@lwfinger.net Tested-by: James Cameron quozl@laptop.org # x86_64 OLPC NL3 Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 +++-- drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c @@ -1123,7 +1123,7 @@ static u8 _rtl8821ae_dbi_read(struct rtl } if (0 == tmp) { read_addr = REG_DBI_RDATA + addr % 4; - ret = rtl_read_word(rtlpriv, read_addr); + ret = rtl_read_byte(rtlpriv, read_addr); } return ret; } @@ -1165,7 +1165,8 @@ static void _rtl8821ae_enable_aspm_back_ }

tmp = _rtl8821ae_dbi_read(rtlpriv, 0x70f); - _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7)); + _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7) | + ASPM_L1_LATENCY << 3);

tmp = _rtl8821ae_dbi_read(rtlpriv, 0x719); _rtl8821ae_dbi_write(rtlpriv, 0x719, tmp | BIT(3) | BIT(4)); --- a/drivers/net/wireless/realtek/rtlwifi/wifi.h +++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h @@ -99,6 +99,7 @@ #define RTL_USB_MAX_RX_COUNT 100 #define QBSS_LOAD_SIZE 5 #define MAX_WMMELE_LENGTH 64 +#define ASPM_L1_LATENCY 7

#define TOTAL_CAM_ENTRY 32

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chuck Lever chuck.lever@oracle.com

commit 1179e2c27efe21167ec9d882b14becefba2ee990 upstream.

Commit 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes a problem where xprtrdma would not work if the device's max_sge capability was small (low single digits).

At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of each RPC. ri_max_send_sges is set to this value:

ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;

Then when marshaling each RPC, rpcrdma_args_inline uses that value to determine whether the device has enough Send SGEs to convey an NFS WRITE payload inline, or whether instead a Read chunk is required.

More recently, commit ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments") used the ri_max_send_sges value to calculate the size of an array, but that commit erroneously assumed ri_max_send_sges contains a value similar to the device's max_sge, and not one that was reduced by the minimum SGE count.

This assumption results in the calculated size of the sendctx's Send SGE array to be too small. When the array is used to marshal an RPC, the code can write Send SGEs into the following sendctx element in that array, corrupting it. When the device's max_sge is large, this issue is entirely harmless; but it results in an oops in the provider's post_send method, if dev.attrs.max_sge is small.

So let's straighten this out: ri_max_send_sges will now contain a value with the same meaning as dev.attrs.max_sge, which makes the code easier to understand, and enables rpcrdma_sendctx_create to calculate the size of the SGE array correctly.

Reported-by: Michal Kalderon Michal.Kalderon@cavium.com Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs") Signed-off-by: Chuck Lever chuck.lever@oracle.com Tested-by: Michal Kalderon Michal.Kalderon@cavium.com Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/sunrpc/xprtrdma/rpc_rdma.c | 2 +- net/sunrpc/xprtrdma/verbs.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/sunrpc/xprtrdma/rpc_rdma.c +++ b/net/sunrpc/xprtrdma/rpc_rdma.c @@ -143,7 +143,7 @@ static bool rpcrdma_args_inline(struct r if (xdr->page_len) { remaining = xdr->page_len; offset = offset_in_page(xdr->page_base); - count = 0; + count = RPCRDMA_MIN_SEND_SGES; while (remaining) { remaining -= min_t(unsigned int, PAGE_SIZE - offset, remaining); --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -509,7 +509,7 @@ rpcrdma_ep_create(struct rpcrdma_ep *ep, pr_warn("rpcrdma: HCA provides only %d send SGEs\n", max_sge); return -ENOMEM; } - ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES; + ia->ri_max_send_sges = max_sge;

if (ia->ri_device->attrs.max_qp_wr <= RPCRDMA_BACKWARD_WRS) { dprintk("RPC: %s: insufficient wqe's available\n",

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jens Axboe axboe@kernel.dk

commit 5235553d821433e1f4fa720fd025d2c4b7ee9994 upstream.

Mikulas reported a workload that saw bad performance, and figured out what it was due to various other types of requests being accounted as reads. Flush requests, for instance. Due to the high latency of those, we heavily throttle the writes to keep the latencies in balance. But they really should be accounted as writes.

Fix this by checking the exact type of the request. If it's a read, account as a read, if it's a write or a flush, account as a write. Any other request we disregard. Previously everything would have been mistakenly accounted as reads.

Reported-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- block/blk-wbt.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/block/blk-wbt.c +++ b/block/blk-wbt.c @@ -697,7 +697,15 @@ u64 wbt_default_latency_nsec(struct requ

static int wbt_data_dir(const struct request *rq) { - return rq_data_dir(rq); + const int op = req_op(rq); + + if (op == REQ_OP_READ) + return READ; + else if (op == REQ_OP_WRITE || op == REQ_OP_FLUSH) + return WRITE; + + /* don't account */ + return -1; }

int wbt_init(struct request_queue *q)

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Westphal fw@strlen.de

commit 1c130ae00b769a2e2df41bad3d6051ee8234b636 upstream.

Mike Christie reports: Starting in 4.14 iscsi logins will fail around 50% of the time.

Problem appears to be that iscsi_target_sk_data_ready() callback may return without doing anything in case it finds the login work queue is still blocked in sock_recvmsg().

Nicholas Bellinger says: It would indicate users providing their own ->sk_data_ready() callback must be responsible for waking up a kthread context blocked on sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is received before the first sock_recvmsg(..., MSG_WAITALL) completes.

So, do this and invoke the original data_ready() callback -- in case of tcp sockets this takes care of waking the thread.

Disclaimer: I do not understand why this problem did not show up before tcp prequeue removal.

(Drop WARN_ON usage - nab)

Reported-by: Mike Christie mchristi@redhat.com Bisected-by: Mike Christie mchristi@redhat.com Tested-by: Mike Christie mchristi@redhat.com Diagnosed-by: Nicholas Bellinger nab@linux-iscsi.org Fixes: e7942d0633c4 ("tcp: remove prequeue support") Signed-off-by: Florian Westphal fw@strlen.de Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Nicholas Bellinger nab@linux-iscsi.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/target/iscsi/iscsi_target_nego.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -432,6 +432,9 @@ static void iscsi_target_sk_data_ready(s if (test_and_set_bit(LOGIN_FLAGS_READ_ACTIVE, &conn->login_flags)) { write_unlock_bh(&sk->sk_callback_lock); pr_debug("Got LOGIN_FLAGS_READ_ACTIVE=1, conn: %p >>>>\n", conn); + if (iscsi_target_sk_data_ready == conn->orig_data_ready) + return; + conn->orig_data_ready(sk); return; }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Liu Bo bo.li.liu@oracle.com

commit e89166990f11c3f21e1649d760dd35f9e410321c upstream.

@cur_offset is not set back to what it should be (@cow_start) if btrfs_next_leaf() returns something wrong, and the range [cow_start, cur_offset) remains locked forever.

cc: stable@vger.kernel.org Signed-off-by: Liu Bo bo.li.liu@oracle.com Reviewed-by: Josef Bacik jbacik@fb.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/inode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1330,8 +1330,11 @@ next_slot: leaf = path->nodes[0]; if (path->slots[0] >= btrfs_header_nritems(leaf)) { ret = btrfs_next_leaf(root, path); - if (ret < 0) + if (ret < 0) { + if (cow_start != (u64)-1) + cur_offset = cow_start; goto error; + } if (ret > 0) break; leaf = path->nodes[0];

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Liu Bo bo.li.liu@oracle.com

commit 55237a5f2431a72435e3ed39e4306e973c0446b7 upstream.

It's possible that btrfs_sync_log() bails out after one of the two btrfs_write_marked_extents() which convert extent state's state bit into EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY and EXTENT_NEW are searched by free_log_tree() so that those extent states with EXTENT_NEED_WAIT lead to memory leak.

cc: stable@vger.kernel.org Signed-off-by: Liu Bo bo.li.liu@oracle.com Reviewed-by: Josef Bacik jbacik@fb.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/tree-log.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3049,13 +3049,14 @@ static void free_log_tree(struct btrfs_t

while (1) { ret = find_first_extent_bit(&log->dirty_log_pages, - 0, &start, &end, EXTENT_DIRTY | EXTENT_NEW, + 0, &start, &end, + EXTENT_DIRTY | EXTENT_NEW | EXTENT_NEED_WAIT, NULL); if (ret) break;

clear_extent_bits(&log->dirty_log_pages, start, end, - EXTENT_DIRTY | EXTENT_NEW); + EXTENT_DIRTY | EXTENT_NEW | EXTENT_NEED_WAIT); }

/*

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Liu Bo bo.li.liu@oracle.com

commit 1a932ef4e47984dee227834667b5ff5a334e4805 upstream.

I got these from running generic/475,

WARNING: CPU: 0 PID: 26384 at fs/btrfs/inode.c:3326 btrfs_orphan_commit_root+0x1ac/0x2b0 [btrfs] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: btrfs_block_rsv_release+0x1c/0x70 [btrfs] Call Trace: btrfs_orphan_release_metadata+0x9f/0x200 [btrfs] btrfs_orphan_del+0x10d/0x170 [btrfs] btrfs_setattr+0x500/0x640 [btrfs] notify_change+0x7ae/0x870 do_truncate+0xca/0x130 vfs_truncate+0x2ee/0x3d0 do_sys_truncate+0xaf/0xf0 SyS_truncate+0xe/0x10 entry_SYSCALL_64_fastpath+0x1f/0x96

The race is between btrfs_orphan_commit_root and btrfs_orphan_del, t1 t2 btrfs_orphan_commit_root btrfs_orphan_del spin_lock check (&root->orphan_inodes) root->orphan_block_rsv = NULL; spin_unlock atomic_dec(&root->orphan_inodes); access root->orphan_block_rsv

Accessing root->orphan_block_rsv must be done before decreasing root->orphan_inodes.

cc: stable@vger.kernel.org v3.12+ Fixes: 703c88e03524 ("Btrfs: fix tracking of orphan inode count") Signed-off-by: Liu Bo bo.li.liu@oracle.com Reviewed-by: Josef Bacik jbacik@fb.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/inode.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-)

--- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3369,6 +3369,11 @@ int btrfs_orphan_add(struct btrfs_trans_ ret = btrfs_orphan_reserve_metadata(trans, inode); ASSERT(!ret); if (ret) { + /* + * dec doesn't need spin_lock as ->orphan_block_rsv + * would be released only if ->orphan_inodes is + * zero. + */ atomic_dec(&root->orphan_inodes); clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED, &inode->runtime_flags); @@ -3383,12 +3388,17 @@ int btrfs_orphan_add(struct btrfs_trans_ if (insert >= 1) { ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode)); if (ret) { - atomic_dec(&root->orphan_inodes); if (reserve) { clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED, &inode->runtime_flags); btrfs_orphan_release_metadata(inode); } + /* + * btrfs_orphan_commit_root may race with us and set + * ->orphan_block_rsv to zero, in order to avoid that, + * decrease ->orphan_inodes after everything is done. + */ + atomic_dec(&root->orphan_inodes); if (ret != -EEXIST) { clear_bit(BTRFS_INODE_HAS_ORPHAN_ITEM, &inode->runtime_flags); @@ -3420,28 +3430,26 @@ static int btrfs_orphan_del(struct btrfs { struct btrfs_root *root = inode->root; int delete_item = 0; - int release_rsv = 0; int ret = 0;

- spin_lock(&root->orphan_lock); if (test_and_clear_bit(BTRFS_INODE_HAS_ORPHAN_ITEM, &inode->runtime_flags)) delete_item = 1;

+ if (delete_item && trans) + ret = btrfs_del_orphan_item(trans, root, btrfs_ino(inode)); + if (test_and_clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED, &inode->runtime_flags)) - release_rsv = 1; - spin_unlock(&root->orphan_lock); + btrfs_orphan_release_metadata(inode);

- if (delete_item) { + /* + * btrfs_orphan_commit_root may race with us and set ->orphan_block_rsv + * to zero, in order to avoid that, decrease ->orphan_inodes after + * everything is done. + */ + if (delete_item) atomic_dec(&root->orphan_inodes); - if (trans) - ret = btrfs_del_orphan_item(trans, root, - btrfs_ino(inode)); - } - - if (release_rsv) - btrfs_orphan_release_metadata(inode);

return ret; }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kurz groug@kaod.org

commit 26d99834f89e76514076d9cd06f61e56e6a509b8 upstream.

When a 9p request is successfully flushed, the server is expected to just mark it as used without sending a 9p reply (ie, without writing data into the buffer). In this case, virtqueue_get_buf() will return len == 0 and we must not report a REQ_STATUS_RCVD status to the client, otherwise the client will erroneously assume the request has not been flushed.

Cc: stable@vger.kernel.org Signed-off-by: Greg Kurz groug@kaod.org Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/9p/trans_virtio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -160,7 +160,8 @@ static void req_done(struct virtqueue *v spin_unlock_irqrestore(&chan->lock, flags); /* Wakeup if anyone waiting for VirtIO ring space. */ wake_up(chan->vc_wq); - p9_client_cb(chan->client, req, REQ_STATUS_RCVD); + if (len) + p9_client_cb(chan->client, req, REQ_STATUS_RCVD); } }

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hui Wang hui.wang@canonical.com

commit 3f2f7c553d077be6a30cb96b2976a2c940bf5335 upstream.

One of them has the codec of alc256 and the other one has the codec of alc289.

Cc: stable@vger.kernel.org Signed-off-by: Hui Wang hui.wang@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6613,6 +6613,11 @@ static const struct snd_hda_pin_quirk al {0x14, 0x90170110}, {0x21, 0x02211020}), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x12, 0x90a60130}, + {0x14, 0x90170110}, + {0x14, 0x01011020}, + {0x21, 0x0221101f}), + SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, ALC256_STANDARD_PINS), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1043, "ASUS", ALC256_FIXUP_ASUS_MIC, {0x14, 0x90170110}, @@ -6681,6 +6686,10 @@ static const struct snd_hda_pin_quirk al {0x12, 0x90a60120}, {0x14, 0x90170110}, {0x21, 0x0321101f}), + SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x12, 0xb7a60130}, + {0x14, 0x90170110}, + {0x21, 0x04211020}), SND_HDA_PIN_QUIRK(0x10ec0290, 0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1, ALC290_STANDARD_PINS, {0x15, 0x04211040},

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kailang Yang kailang@realtek.com

commit 40e2c4e5a7efcd50983aacbddd3c617e776018bf upstream.

This platform had two Dmic and single Dmic. This update was for single Dmic.

This commit was for two Dmic.

Fixes: 75ee94b20b46 ("ALSA: hda - fix headset mic problem for Dell machines...") Signed-off-by: Kailang Yang kailang@realtek.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6199,6 +6199,8 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x1028, 0x075d, "Dell AIO", ALC298_FIXUP_SPK_VOLUME), SND_PCI_QUIRK(0x1028, 0x0798, "Dell Inspiron 17 7000 Gaming", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER), SND_PCI_QUIRK(0x1028, 0x082a, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE), + SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan-Marek Glogowski glogow@fbihome.de

commit fdcc968a3b290407bcba9d4c90e2fba6d8d928f1 upstream.

These laptops have a combined jack to attach headsets, the U727 on the left, the U757 on the right, but a headsets microphone doesn't work. Using hdajacksensetest I found that pin 0x19 changed the present state when plugging the headset, in addition to 0x21, but didn't have the correct configuration (shown as "Not connected").

So this sets the configuration to the same values as the headphone pin 0x21 except for the device type microphone, which makes it work correctly. With the patch the configured pins for U727 are

Pin 0x12 (Internal Mic, Mobile-In): present = No Pin 0x14 (Internal Speaker): present = No Pin 0x19 (Black Mic, Left side): present = No Pin 0x1d (Internal Aux): present = No Pin 0x21 (Black Headphone, Left side): present = No

Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3378,6 +3378,19 @@ static void alc269_fixup_pincfg_no_hp_to spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; }

+static void alc269_fixup_pincfg_U7x7_headset_mic(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + unsigned int cfg_headphone = snd_hda_codec_get_pincfg(codec, 0x21); + unsigned int cfg_headset_mic = snd_hda_codec_get_pincfg(codec, 0x19); + + if (cfg_headphone && cfg_headset_mic == 0x411111f0) + snd_hda_codec_set_pincfg(codec, 0x19, + (cfg_headphone & ~AC_DEFCFG_DEVICE) | + (AC_JACK_MIC_IN << AC_DEFCFG_DEVICE_SHIFT)); +} + static void alc269_fixup_hweq(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -5251,6 +5264,7 @@ enum { ALC269_FIXUP_LIFEBOOK_EXTMIC, ALC269_FIXUP_LIFEBOOK_HP_PIN, ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT, + ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC, ALC269_FIXUP_AMIC, ALC269_FIXUP_DMIC, ALC269VB_FIXUP_AMIC, @@ -5457,6 +5471,10 @@ static const struct hda_fixup alc269_fix .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_no_hp_to_lineout, }, + [ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_pincfg_U7x7_headset_mic, + }, [ALC269_FIXUP_AMIC] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -6331,6 +6349,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x10cf, 0x159f, "Lifebook E780", ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT), SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN), SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN), + SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC),

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Mack daniel@zonque.org

commit 7c74866baef1827e18f8269aec85030063520bd4 upstream.

Add some more devices that need quirks to handle DSD modes correctly.

Signed-off-by: Daniel Mack daniel@zonque.org Reported-and-tested-by: Thomas Gresens tgresens@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/usb/quirks.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1363,8 +1363,11 @@ u64 snd_usb_interface_dsd_format_quirks( return SNDRV_PCM_FMTBIT_DSD_U32_BE; break;

- /* Amanero Combo384 USB interface with native DSD support */ - case USB_ID(0x16d0, 0x071a): + /* Amanero Combo384 USB based DACs with native DSD support */ + case USB_ID(0x16d0, 0x071a): /* Amanero - Combo384 */ + case USB_ID(0x2ab6, 0x0004): /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */ + case USB_ID(0x2ab6, 0x0005): /* T+A USB HD Audio 1 */ + case USB_ID(0x2ab6, 0x0006): /* T+A USB HD Audio 2 */ if (fp->altsetting == 2) { switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) { case 0x199:

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Hogan jhogan@kernel.org

commit ec897569ad7dbc6d595873a487c3fac23f463f76 upstream.

Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is conditional upon USB && USB_SUPPORT, so that it can be freely selected by platform Kconfig symbols in architecture code.

For example once the MIPS_GENERIC platform selects are fixed in commit 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS 32r6_defconfig warns like so:

warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB)

Fixes: 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN") Signed-off-by: James Hogan jhogan@kernel.org Cc: Corentin Labbe clabbe.montjoie@gmail.com Cc: Ralf Baechle ralf@linux-mips.org Cc: Paul Burton paul.burton@mips.com Cc: linux-usb@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Patchwork: https://patchwork.linux-mips.org/patch/18559/ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/Kconfig | 8 ++++++++ drivers/usb/host/Kconfig | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -19,6 +19,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO config USB_EHCI_BIG_ENDIAN_DESC bool

+config USB_UHCI_BIG_ENDIAN_MMIO + bool + default y if SPARC_LEON + +config USB_UHCI_BIG_ENDIAN_DESC + bool + default y if SPARC_LEON + menuconfig USB_SUPPORT bool "USB support" depends on HAS_IOMEM --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -625,14 +625,6 @@ config USB_UHCI_ASPEED bool default y if ARCH_ASPEED

-config USB_UHCI_BIG_ENDIAN_MMIO - bool - default y if SPARC_LEON - -config USB_UHCI_BIG_ENDIAN_DESC - bool - default y if SPARC_LEON - config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" depends on OF_GPIO && QE_GPIO && QUICC_ENGINE

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann arnd@arndb.de

commit 5628a8ca14149ba4226e3bdce3a04c3b688435ad upstream.

According to the comment added to exynos_dt_pmu_match[] in commit 8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains"), the RTC is not able to wake up the system through the PMU on Exynos5410, unlike Exynos5420.

However, when the RTC DT node got added, it was a straight copy of the Exynos5420 node, which now causes a warning from dtc.

This removes the incorrect interrupt-parent, which should get the interrupt working and avoid the warning.

Fixes: e1e146b1b062 ("ARM: dts: exynos: Add RTC and I2C to Exynos5410") Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/exynos5410.dtsi | 1 - 1 file changed, 1 deletion(-)

--- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -333,7 +333,6 @@ &rtc { clocks = <&clock CLK_RTC>; clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; status = "disabled"; };

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjorn Andersson bjorn.andersson@linaro.org

commit b0ab681285aa66064f2de5b74191c0cabba381ff upstream.

Add a missing #phy-cells to the dsi-phy, to silence dtc warning.

Cc: Archit Taneja architt@codeaurora.org Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support") Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Reviewed-by: Archit Taneja architt@codeaurora.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -906,6 +906,7 @@ "dsi_phy_regulator";

#clock-cells = <1>; + #phy-cells = <0>;

clocks = <&gcc GCC_MDSS_AHB_CLK>; clock-names = "iface_clk";

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthias Brugger matthias.bgg@gmail.com

commit 76a09ce214addb8ddc0f6d50dc1106a5f829e713 upstream.

The ethsys binding misses the reset-cells, this patch adds this property.

Reviewed-by: Rob Herring robh@kernel.org Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/mt7623.dtsi | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -758,6 +758,7 @@ "syscon"; reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; };

eth: ethernet@1b100000 {

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Walleij linus.walleij@linaro.org

commit 586b2a4befad88cd87b372a1cea01e58c6811ea9 upstream.

The EB MP board probably has a character LCD but the board manual does not really state which IRQ it has assigned to this device. The invalid assignment was a mistake by me during submission of the DTSI where I was looking for the reference, didn't find it and didn't fill it in.

Delete this for now: it can probably be fixed but that requires access to the actual board for some trial-and-error experiments.

Reported-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Olof Johansson olof@lixom.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/arm-realview-eb-mp.dtsi | 5 ----- 1 file changed, 5 deletions(-)

--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi @@ -150,11 +150,6 @@ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; };

-&charlcd { - interrupt-parent = <&intc>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; -}; - &serial0 { interrupt-parent = <&intc>; interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;

4.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: yinbo.zhu yinbo.zhu@nxp.com

commit 97618aca1440b5addc5c3d78659d3e176be23b80 upstream.

The bit eSDHC_TBCTL[TB_EN] couldn't be reset by eSDHC_SYSCTL[RSTA] which is used to reset for all. The driver should make sure it's cleared before card initialization, otherwise the initialization would fail.

Signed-off-by: yinbo.zhu yinbo.zhu@nxp.com Acked-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Cc: Rasmus Villemoes rasmus.villemoes@prevas.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/mmc/host/sdhci-of-esdhc.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -785,6 +785,10 @@ static void esdhc_init(struct platform_d pltfm_host = sdhci_priv(host); esdhc = sdhci_pltfm_priv(pltfm_host);

+ val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~ESDHC_TB_EN; + sdhci_writel(host, val, ESDHC_TBCTL); + host_ver = sdhci_readw(host, SDHCI_HOST_VERSION); esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;