Hello Kernel team,
I discovered that the 6.13.2 kernel breaks my laptop's wireless. Here are the details of my system:
- Framework 13 (AMD Ryzen 7840) - mt7925e wireless card (purchased from: https://www.amazon.com/dp/B0DP68GV9V) - Arch Linux, using IWD (3.3) to manage Wireless network connectivity
When running the 6.13.0 and 6.13.1 kernels (from Arch), the wireless adapter worked very well. I was able to associate to my Wifi 7 network (Ubiquiti U7 Pros) and operate in the 6GHz spectrum with 160MHz channels. I also have an older wireless network that runs on Google Nest routers.
When I upgraded to the 6.13.2 kernel from Arch Linux, my wireless suddenly stopped working. I looked at the kernel logs and saw these messages (wireless addresses changed to make clearer the different points):
[ 10.007185] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.376446] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.384610] wlan0: 28:80:xx:yy:zz:6e denied authentication (status 77) [ 10.483900] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.490138] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.507531] wlan0: send auth to 28:80:xx:yy:zz:6e (try 2/3) [ 10.525580] wlan0: send auth to 28:80:xx:yy:zz:6e (try 3/3) [ 10.543048] wlan0: authentication with 28:80:xx:yy:zz:6e timed out [ 10.619423] wlan0: authenticate with 28:80:aa:bb:cc:e1 (local address=40:1a:58:aa:bb:cc) [ 10.749880] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 1/3) [ 10.768530] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 2/3) [ 10.786954] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 3/3) [ 10.805792] wlan0: authentication with 28:80:aa:bb:cc:e1 timed out [ 10.881620] wlan0: authenticate with 28:80:ee:ff:gg:6d (local address=40:1a:58:aa:bb:cc) [ 11.016891] wlan0: send auth to 28:80:ee:ff:gg:6d (try 1/3) [ 11.033622] wlan0: send auth to 28:80:ee:ff:gg:6d (try 2/3) [ 11.050574] wlan0: send auth to 28:80:ee:ff:gg:6d (try 3/3) [ 11.065250] wlan0: authentication with 28:80:ee:ff:gg:6d timed out [ 11.139745] wlan0: authenticate with 2a:80:hh:ii:jj:6f (local address=40:1a:58:aa:bb:cc) [ 11.506205] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 1/3) [ 11.528071] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 2/3) [ 11.550043] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 3/3) [ 11.572005] wlan0: authentication with 2a:80:hh:ii:jj:6f timed out [ 16.312942] wlan0: authenticate with 2a:80:kk:ll:mm:e3 (local address=40:1a:58:aa:bb:cc) [ 16.675865] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 1/3) [ 16.702328] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 2/3) [ 16.726162] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 3/3) [ 16.748958] wlan0: authentication with 2a:80:kk:ll:mm:e3 timed out [ 16.829874] wlan0: authenticate with 2a:80:nn:oo:pp:e2 (local address=40:1a:58:aa:bb:cc) [ 17.196579] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 1/3) [ 17.214256] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 2/3) [ 17.231852] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 3/3) [ 17.250116] wlan0: authentication with 2a:80:nn:oo:pp:e2 timed out
Then IWD seems to have stopped attempting to associate for some time. My wireless interface showed link down, and I had no IP address. I attempted to associate to my older Google Nest network, but that also failed with the same behavior (thus showing the problem not to be Wifi 7 or Ubiquiti-specific).
I compiled up the mainline 6.13.2 kernel myself and saw the same behavior.
I then went back to the Arch 6.13.1 kernel, and the system operated perfectly fine as expected.
I bisected the break to this commit:
$ git bisect good c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 is the first bad commit commit c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 Author: Ming Yen Hsieh mingyen.hsieh@mediatek.com Date: Tue Dec 10 17:19:25 2024 -0800
wifi: mt76: mt7925: Cleanup MLO settings post-disconnection
[ Upstream commit 816161051a039eeb1226fc85e2b38389f508906c ]
Clean up MLO settings after disconnection.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Signed-off-by: Sean Wang sean.wang@mediatek.com Link: https://patch.msgid.link/20241211011926.5002-16-sean.wang@kernel.org Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 37 +++++++++++++++++++++++++++++++++++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.h | 2 +- 3 files changed, 38 insertions(+), 5 deletions(-)
I attempted to revert this commit on top of 6.13.2, but there are other commits that modify these files, so it can not be reverted by itself. I looked at the commit, and a thought occurred to me that maybe wpa_supplicant might still function even though iwd did not.
I set up wpa_supplicant, and found that I was able to associate and pass network traffic. HOWEVER, when running a simple iperf3 test, saw very slow speeds while associated (about 10 times slower than seen with the 6.13.1 kernel). Thus, I think this is quite clearly a regression. My guess is that this wireless adapter is new enough that many people have yet to hit this.
Here are the details of the card: # dmesg | grep mt79: [ 12.617246] mt7925e 0000:01:00.0: enabling device (0000 -> 0002) [ 12.622426] mt7925e 0000:01:00.0: ASIC revision: 79250000 [ 12.698681] mt7925e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20241104132949a [ 13.047884] mt7925e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20241104133053
# lspci -vvv (mediatek device): 01:00.0 Network controller: MEDIATEK Corp. Device 7925 (rev 01) Subsystem: Hewlett-Packard Company Device 8c38 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 116 IOMMU group: 12 Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=2M] Region 2: Memory at 90800000 (64-bit, non-prefetchable) [size=32K] Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+ Address: 00000000fee00000 Data: 0000 Masking: fffffffe Pending: 00000000 Capabilities: [f8] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?> Capabilities: [108 v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [110 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=3us PortTPowerOnTime=52us L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ T_CommonMode=0us LTR1.2_Threshold=166912ns L1SubCtl2: T_PwrOn=150us Capabilities: [200 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: mt7925e Kernel modules: mt7925e
On my system, /etc/iwd/main.conf contains: ------------ [Scan] DisablePeriodicScan=true
[General] EnableNetworkConfiguration=true Country=US ------------
At this point my suggestion is that the v6.13.2 mt7925 changes should be reverted from the stable series for now, unless a fix can be quickly found. I have not yet tested 6.14-rc2, but would be willing to do so if it would be helpful.
Note: I am not subscribed to any of these lists, so please CC me if you want to contact me about this.
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hi Caleb,
Here are some patches are currently ongoing. Could you please apply these patches and try again?
https://patchwork.kernel.org/project/linux-wireless/list/?series=925106
Thanks~
Best Regards, Yen.
On Wed, 2025-02-12 at 21:16 -0600, Caleb Jorden wrote:
External email : Please do not click links or open attachments until you have verified the sender or the content.
Hello Kernel team,
I discovered that the 6.13.2 kernel breaks my laptop's wireless. Here are the details of my system:
- Framework 13 (AMD Ryzen 7840)
- mt7925e wireless card (purchased from:
https://urldefense.com/v3/__https://www.amazon.com/dp/B0DP68GV9V__%3B%21%21 CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng1dxSh_2yZLKT8S8DkDEwjaGvl cmALUeik84J7ePLJnvOe-2oNQ7dxCM$ )
- Arch Linux, using IWD (3.3) to manage Wireless network connectivity
When running the 6.13.0 and 6.13.1 kernels (from Arch), the wireless adapter worked very well. I was able to associate to my Wifi 7 network (Ubiquiti U7 Pros) and operate in the 6GHz spectrum with 160MHz channels. I also have an older wireless network that runs on Google Nest routers.
When I upgraded to the 6.13.2 kernel from Arch Linux, my wireless suddenly stopped working. I looked at the kernel logs and saw these messages (wireless addresses changed to make clearer the different points):
[ 10.007185] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.376446] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.384610] wlan0: 28:80:xx:yy:zz:6e denied authentication (status 77) [ 10.483900] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.490138] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.507531] wlan0: send auth to 28:80:xx:yy:zz:6e (try 2/3) [ 10.525580] wlan0: send auth to 28:80:xx:yy:zz:6e (try 3/3) [ 10.543048] wlan0: authentication with 28:80:xx:yy:zz:6e timed out [ 10.619423] wlan0: authenticate with 28:80:aa:bb:cc:e1 (local address=40:1a:58:aa:bb:cc) [ 10.749880] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 1/3) [ 10.768530] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 2/3) [ 10.786954] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 3/3) [ 10.805792] wlan0: authentication with 28:80:aa:bb:cc:e1 timed out [ 10.881620] wlan0: authenticate with 28:80:ee:ff:gg:6d (local address=40:1a:58:aa:bb:cc) [ 11.016891] wlan0: send auth to 28:80:ee:ff:gg:6d (try 1/3) [ 11.033622] wlan0: send auth to 28:80:ee:ff:gg:6d (try 2/3) [ 11.050574] wlan0: send auth to 28:80:ee:ff:gg:6d (try 3/3) [ 11.065250] wlan0: authentication with 28:80:ee:ff:gg:6d timed out [ 11.139745] wlan0: authenticate with 2a:80:hh:ii:jj:6f (local address=40:1a:58:aa:bb:cc) [ 11.506205] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 1/3) [ 11.528071] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 2/3) [ 11.550043] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 3/3) [ 11.572005] wlan0: authentication with 2a:80:hh:ii:jj:6f timed out [ 16.312942] wlan0: authenticate with 2a:80:kk:ll:mm:e3 (local address=40:1a:58:aa:bb:cc) [ 16.675865] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 1/3) [ 16.702328] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 2/3) [ 16.726162] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 3/3) [ 16.748958] wlan0: authentication with 2a:80:kk:ll:mm:e3 timed out [ 16.829874] wlan0: authenticate with 2a:80:nn:oo:pp:e2 (local address=40:1a:58:aa:bb:cc) [ 17.196579] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 1/3) [ 17.214256] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 2/3) [ 17.231852] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 3/3) [ 17.250116] wlan0: authentication with 2a:80:nn:oo:pp:e2 timed out
Then IWD seems to have stopped attempting to associate for some time. My wireless interface showed link down, and I had no IP address. I attempted to associate to my older Google Nest network, but that also failed with the same behavior (thus showing the problem not to be Wifi 7 or Ubiquiti-specific).
I compiled up the mainline 6.13.2 kernel myself and saw the same behavior.
I then went back to the Arch 6.13.1 kernel, and the system operated perfectly fine as expected.
I bisected the break to this commit:
$ git bisect good c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 is the first bad commit commit c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 Author: Ming Yen Hsieh mingyen.hsieh@mediatek.com Date: Tue Dec 10 17:19:25 2024 -0800
wifi: mt76: mt7925: Cleanup MLO settings post-disconnection
[ Upstream commit 816161051a039eeb1226fc85e2b38389f508906c ]
Clean up MLO settings after disconnection.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Signed-off-by: Sean Wang sean.wang@mediatek.com Link: https://urldefense.com/v3/__https://patch.msgid.link/20241211011926.5 002-16- sean.wang@kernel.org__;!!CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng 1dxSh_2yZLKT8S8DkDEwjaGvlcmALUeik84J7ePLJnvOe-2okec0mTc$ Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 37 +++++++++++++++++++++++++++++++++++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.h | 2 +- 3 files changed, 38 insertions(+), 5 deletions(-)
I attempted to revert this commit on top of 6.13.2, but there are other commits that modify these files, so it can not be reverted by itself. I looked at the commit, and a thought occurred to me that maybe wpa_supplicant might still function even though iwd did not.
I set up wpa_supplicant, and found that I was able to associate and pass network traffic. HOWEVER, when running a simple iperf3 test, saw very slow speeds while associated (about 10 times slower than seen with the 6.13.1 kernel). Thus, I think this is quite clearly a regression. My guess is that this wireless adapter is new enough that many people have yet to hit this.
Here are the details of the card: # dmesg | grep mt79: [ 12.617246] mt7925e 0000:01:00.0: enabling device (0000 -> 0002) [ 12.622426] mt7925e 0000:01:00.0: ASIC revision: 79250000 [ 12.698681] mt7925e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20241104132949a [ 13.047884] mt7925e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20241104133053
# lspci -vvv (mediatek device): 01:00.0 Network controller: MEDIATEK Corp. Device 7925 (rev 01) Subsystem: Hewlett-Packard Company Device 8c38 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 116 IOMMU group: 12 Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=2M] Region 2: Memory at 90800000 (64-bit, non-prefetchable) [size=32K] Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+ Address: 00000000fee00000 Data: 0000 Masking: fffffffe Pending: 00000000 Capabilities: [f8] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?> Capabilities: [108 v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [110 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=3us PortTPowerOnTime=52us L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ T_CommonMode=0us LTR1.2_Threshold=166912ns L1SubCtl2: T_PwrOn=150us Capabilities: [200 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: mt7925e Kernel modules: mt7925e
On my system, /etc/iwd/main.conf contains:
[Scan] DisablePeriodicScan=true
[General] EnableNetworkConfiguration=true Country=US
At this point my suggestion is that the v6.13.2 mt7925 changes should be reverted from the stable series for now, unless a fix can be quickly found. I have not yet tested 6.14-rc2, but would be willing to do so if it would be helpful.
Note: I am not subscribed to any of these lists, so please CC me if you want to contact me about this.
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hi Caleb,
Here are some patches are currently ongoing. Could you please apply these patches and try again?
https://patchwork.kernel.org/project/linux-wireless/list/?series=925106
Thanks~
Best Regards, Yen.
On Wed, Feb 12, 2025 at 9:43 PM Mingyen Hsieh (謝明諺) Mingyen.Hsieh@mediatek.com wrote:
On Wed, 2025-02-12 at 21:16 -0600, Caleb Jorden wrote:
External email : Please do not click links or open attachments until you have verified the sender or the content.
Hello Kernel team,
I discovered that the 6.13.2 kernel breaks my laptop's wireless. Here are the details of my system:
- Framework 13 (AMD Ryzen 7840)
- mt7925e wireless card (purchased from:
https://urldefense.com/v3/__https://www.amazon.com/dp/B0DP68GV9V__%3B%21%21 CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng1dxSh_2yZLKT8S8DkDEwjaGvl cmALUeik84J7ePLJnvOe-2oNQ7dxCM$ )
- Arch Linux, using IWD (3.3) to manage Wireless network connectivity
When running the 6.13.0 and 6.13.1 kernels (from Arch), the wireless adapter worked very well. I was able to associate to my Wifi 7 network (Ubiquiti U7 Pros) and operate in the 6GHz spectrum with 160MHz channels. I also have an older wireless network that runs on Google Nest routers.
When I upgraded to the 6.13.2 kernel from Arch Linux, my wireless suddenly stopped working. I looked at the kernel logs and saw these messages (wireless addresses changed to make clearer the different points):
[ 10.007185] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.376446] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.384610] wlan0: 28:80:xx:yy:zz:6e denied authentication (status 77) [ 10.483900] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.490138] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.507531] wlan0: send auth to 28:80:xx:yy:zz:6e (try 2/3) [ 10.525580] wlan0: send auth to 28:80:xx:yy:zz:6e (try 3/3) [ 10.543048] wlan0: authentication with 28:80:xx:yy:zz:6e timed out [ 10.619423] wlan0: authenticate with 28:80:aa:bb:cc:e1 (local address=40:1a:58:aa:bb:cc) [ 10.749880] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 1/3) [ 10.768530] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 2/3) [ 10.786954] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 3/3) [ 10.805792] wlan0: authentication with 28:80:aa:bb:cc:e1 timed out [ 10.881620] wlan0: authenticate with 28:80:ee:ff:gg:6d (local address=40:1a:58:aa:bb:cc) [ 11.016891] wlan0: send auth to 28:80:ee:ff:gg:6d (try 1/3) [ 11.033622] wlan0: send auth to 28:80:ee:ff:gg:6d (try 2/3) [ 11.050574] wlan0: send auth to 28:80:ee:ff:gg:6d (try 3/3) [ 11.065250] wlan0: authentication with 28:80:ee:ff:gg:6d timed out [ 11.139745] wlan0: authenticate with 2a:80:hh:ii:jj:6f (local address=40:1a:58:aa:bb:cc) [ 11.506205] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 1/3) [ 11.528071] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 2/3) [ 11.550043] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 3/3) [ 11.572005] wlan0: authentication with 2a:80:hh:ii:jj:6f timed out [ 16.312942] wlan0: authenticate with 2a:80:kk:ll:mm:e3 (local address=40:1a:58:aa:bb:cc) [ 16.675865] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 1/3) [ 16.702328] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 2/3) [ 16.726162] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 3/3) [ 16.748958] wlan0: authentication with 2a:80:kk:ll:mm:e3 timed out [ 16.829874] wlan0: authenticate with 2a:80:nn:oo:pp:e2 (local address=40:1a:58:aa:bb:cc) [ 17.196579] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 1/3) [ 17.214256] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 2/3) [ 17.231852] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 3/3) [ 17.250116] wlan0: authentication with 2a:80:nn:oo:pp:e2 timed out
Then IWD seems to have stopped attempting to associate for some time. My wireless interface showed link down, and I had no IP address. I attempted to associate to my older Google Nest network, but that also failed with the same behavior (thus showing the problem not to be Wifi 7 or Ubiquiti-specific).
I compiled up the mainline 6.13.2 kernel myself and saw the same behavior.
I then went back to the Arch 6.13.1 kernel, and the system operated perfectly fine as expected.
I bisected the break to this commit:
$ git bisect good c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 is the first bad commit commit c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 Author: Ming Yen Hsieh mingyen.hsieh@mediatek.com Date: Tue Dec 10 17:19:25 2024 -0800
wifi: mt76: mt7925: Cleanup MLO settings post-disconnection [ Upstream commit 816161051a039eeb1226fc85e2b38389f508906c ] Clean up MLO settings after disconnection. Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when thefirmware supports it") Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Signed-off-by: Sean Wang sean.wang@mediatek.com Link: https://urldefense.com/v3/__https://patch.msgid.link/20241211011926.5 002-16- sean.wang@kernel.org__;!!CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng 1dxSh_2yZLKT8S8DkDEwjaGvlcmALUeik84J7ePLJnvOe-2okec0mTc$ Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 37 +++++++++++++++++++++++++++++++++++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.h | 2 +- 3 files changed, 38 insertions(+), 5 deletions(-)
I attempted to revert this commit on top of 6.13.2, but there are other commits that modify these files, so it can not be reverted by itself. I looked at the commit, and a thought occurred to me that maybe wpa_supplicant might still function even though iwd did not.
I set up wpa_supplicant, and found that I was able to associate and pass network traffic. HOWEVER, when running a simple iperf3 test, saw very slow speeds while associated (about 10 times slower than seen with the 6.13.1 kernel). Thus, I think this is quite clearly a regression. My guess is that this wireless adapter is new enough that many people have yet to hit this.
Here are the details of the card: # dmesg | grep mt79: [ 12.617246] mt7925e 0000:01:00.0: enabling device (0000 -> 0002) [ 12.622426] mt7925e 0000:01:00.0: ASIC revision: 79250000 [ 12.698681] mt7925e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20241104132949a [ 13.047884] mt7925e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20241104133053
# lspci -vvv (mediatek device): 01:00.0 Network controller: MEDIATEK Corp. Device 7925 (rev 01) Subsystem: Hewlett-Packard Company Device 8c38 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 116 IOMMU group: 12 Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=2M] Region 2: Memory at 90800000 (64-bit, non-prefetchable) [size=32K] Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+ Address: 00000000fee00000 Data: 0000 Masking: fffffffe Pending: 00000000 Capabilities: [f8] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?> Capabilities: [108 v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [110 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=3us PortTPowerOnTime=52us L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ T_CommonMode=0us LTR1.2_Threshold=166912ns L1SubCtl2: T_PwrOn=150us Capabilities: [200 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: mt7925e Kernel modules: mt7925e
On my system, /etc/iwd/main.conf contains:
[Scan] DisablePeriodicScan=true
[General] EnableNetworkConfiguration=true Country=US
At this point my suggestion is that the v6.13.2 mt7925 changes should be reverted from the stable series for now, unless a fix can be quickly found. I have not yet tested 6.14-rc2, but would be willing to do so if it would be helpful.
Note: I am not subscribed to any of these lists, so please CC me if you want to contact me about this.
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hi Caleb,
Here are some patches are currently ongoing. Could you please apply these patches and try again?
https://patchwork.kernel.org/project/linux-wireless/list/?series=925106
Thanks~
Best Regards, Yen.
Hi Yen,
Thank you for getting back to me so quickly. However, I can't apply these patches to the v6.13.2 kernel. It appears that these apply cleanly to the v6.14-rc2 kernel, but the stable series seems to have only a subset of those changes. Is this what you expect, or am I missing something?
Respectfully submitted, Caleb Jorden cjorden@gmail.com
On Wed, Feb 12, 2025 at 9:50 PM Caleb Jorden cjorden@gmail.com wrote:
On Wed, Feb 12, 2025 at 9:43 PM Mingyen Hsieh (謝明諺) Mingyen.Hsieh@mediatek.com wrote:
On Wed, 2025-02-12 at 21:16 -0600, Caleb Jorden wrote:
External email : Please do not click links or open attachments until you have verified the sender or the content.
Hello Kernel team,
I discovered that the 6.13.2 kernel breaks my laptop's wireless. Here are the details of my system:
- Framework 13 (AMD Ryzen 7840)
- mt7925e wireless card (purchased from:
https://urldefense.com/v3/__https://www.amazon.com/dp/B0DP68GV9V__%3B%21%21 CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng1dxSh_2yZLKT8S8DkDEwjaGvl cmALUeik84J7ePLJnvOe-2oNQ7dxCM$ )
- Arch Linux, using IWD (3.3) to manage Wireless network connectivity
When running the 6.13.0 and 6.13.1 kernels (from Arch), the wireless adapter worked very well. I was able to associate to my Wifi 7 network (Ubiquiti U7 Pros) and operate in the 6GHz spectrum with 160MHz channels. I also have an older wireless network that runs on Google Nest routers.
When I upgraded to the 6.13.2 kernel from Arch Linux, my wireless suddenly stopped working. I looked at the kernel logs and saw these messages (wireless addresses changed to make clearer the different points):
[ 10.007185] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.376446] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.384610] wlan0: 28:80:xx:yy:zz:6e denied authentication (status 77) [ 10.483900] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.490138] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.507531] wlan0: send auth to 28:80:xx:yy:zz:6e (try 2/3) [ 10.525580] wlan0: send auth to 28:80:xx:yy:zz:6e (try 3/3) [ 10.543048] wlan0: authentication with 28:80:xx:yy:zz:6e timed out [ 10.619423] wlan0: authenticate with 28:80:aa:bb:cc:e1 (local address=40:1a:58:aa:bb:cc) [ 10.749880] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 1/3) [ 10.768530] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 2/3) [ 10.786954] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 3/3) [ 10.805792] wlan0: authentication with 28:80:aa:bb:cc:e1 timed out [ 10.881620] wlan0: authenticate with 28:80:ee:ff:gg:6d (local address=40:1a:58:aa:bb:cc) [ 11.016891] wlan0: send auth to 28:80:ee:ff:gg:6d (try 1/3) [ 11.033622] wlan0: send auth to 28:80:ee:ff:gg:6d (try 2/3) [ 11.050574] wlan0: send auth to 28:80:ee:ff:gg:6d (try 3/3) [ 11.065250] wlan0: authentication with 28:80:ee:ff:gg:6d timed out [ 11.139745] wlan0: authenticate with 2a:80:hh:ii:jj:6f (local address=40:1a:58:aa:bb:cc) [ 11.506205] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 1/3) [ 11.528071] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 2/3) [ 11.550043] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 3/3) [ 11.572005] wlan0: authentication with 2a:80:hh:ii:jj:6f timed out [ 16.312942] wlan0: authenticate with 2a:80:kk:ll:mm:e3 (local address=40:1a:58:aa:bb:cc) [ 16.675865] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 1/3) [ 16.702328] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 2/3) [ 16.726162] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 3/3) [ 16.748958] wlan0: authentication with 2a:80:kk:ll:mm:e3 timed out [ 16.829874] wlan0: authenticate with 2a:80:nn:oo:pp:e2 (local address=40:1a:58:aa:bb:cc) [ 17.196579] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 1/3) [ 17.214256] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 2/3) [ 17.231852] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 3/3) [ 17.250116] wlan0: authentication with 2a:80:nn:oo:pp:e2 timed out
Then IWD seems to have stopped attempting to associate for some time. My wireless interface showed link down, and I had no IP address. I attempted to associate to my older Google Nest network, but that also failed with the same behavior (thus showing the problem not to be Wifi 7 or Ubiquiti-specific).
I compiled up the mainline 6.13.2 kernel myself and saw the same behavior.
I then went back to the Arch 6.13.1 kernel, and the system operated perfectly fine as expected.
I bisected the break to this commit:
$ git bisect good c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 is the first bad commit commit c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 Author: Ming Yen Hsieh mingyen.hsieh@mediatek.com Date: Tue Dec 10 17:19:25 2024 -0800
wifi: mt76: mt7925: Cleanup MLO settings post-disconnection [ Upstream commit 816161051a039eeb1226fc85e2b38389f508906c ] Clean up MLO settings after disconnection. Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when thefirmware supports it") Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Signed-off-by: Sean Wang sean.wang@mediatek.com Link: https://urldefense.com/v3/__https://patch.msgid.link/20241211011926.5 002-16- sean.wang@kernel.org__;!!CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng 1dxSh_2yZLKT8S8DkDEwjaGvlcmALUeik84J7ePLJnvOe-2okec0mTc$ Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 37 +++++++++++++++++++++++++++++++++++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.h | 2 +- 3 files changed, 38 insertions(+), 5 deletions(-)
I attempted to revert this commit on top of 6.13.2, but there are other commits that modify these files, so it can not be reverted by itself. I looked at the commit, and a thought occurred to me that maybe wpa_supplicant might still function even though iwd did not.
I set up wpa_supplicant, and found that I was able to associate and pass network traffic. HOWEVER, when running a simple iperf3 test, saw very slow speeds while associated (about 10 times slower than seen with the 6.13.1 kernel). Thus, I think this is quite clearly a regression. My guess is that this wireless adapter is new enough that many people have yet to hit this.
Here are the details of the card: # dmesg | grep mt79: [ 12.617246] mt7925e 0000:01:00.0: enabling device (0000 -> 0002) [ 12.622426] mt7925e 0000:01:00.0: ASIC revision: 79250000 [ 12.698681] mt7925e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20241104132949a [ 13.047884] mt7925e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20241104133053
# lspci -vvv (mediatek device): 01:00.0 Network controller: MEDIATEK Corp. Device 7925 (rev 01) Subsystem: Hewlett-Packard Company Device 8c38 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 116 IOMMU group: 12 Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=2M] Region 2: Memory at 90800000 (64-bit, non-prefetchable) [size=32K] Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+ Address: 00000000fee00000 Data: 0000 Masking: fffffffe Pending: 00000000 Capabilities: [f8] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?> Capabilities: [108 v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [110 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=3us PortTPowerOnTime=52us L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ T_CommonMode=0us LTR1.2_Threshold=166912ns L1SubCtl2: T_PwrOn=150us Capabilities: [200 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: mt7925e Kernel modules: mt7925e
On my system, /etc/iwd/main.conf contains:
[Scan] DisablePeriodicScan=true
[General] EnableNetworkConfiguration=true Country=US
At this point my suggestion is that the v6.13.2 mt7925 changes should be reverted from the stable series for now, unless a fix can be quickly found. I have not yet tested 6.14-rc2, but would be willing to do so if it would be helpful.
Note: I am not subscribed to any of these lists, so please CC me if you want to contact me about this.
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hi Caleb,
Here are some patches are currently ongoing. Could you please apply these patches and try again?
https://patchwork.kernel.org/project/linux-wireless/list/?series=925106
Thanks~
Best Regards, Yen.
Hi Yen,
Thank you for getting back to me so quickly. However, I can't apply these patches to the v6.13.2 kernel. It appears that these apply cleanly to the v6.14-rc2 kernel, but the stable series seems to have only a subset of those changes. Is this what you expect, or am I missing something?
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hello again,
I decided to test the 6.14-rc2 kernel, and found it is broken just like the 6.13.2 kernel.
I then tried applying the patches found here:
https://patchwork.kernel.org/project/linux-wireless/list/?series=925106
as suggested by Yen on top of 6.14-rc2, and everything seems to be working normally again! Speed seems to be very good (possibly better than even 6.13.1).
So, I would suggest the 6.14 series pick up that set of patches.
For the stable 6.13.y series, it appears that either these patches (and any necessary predecessors) need to be applied, or the changes for the mt7925 driver introduced by 6.13.2 need to be reverted in order to fix the currently-broken state.
If there is any further checking I can do that would be helpful, please let me know.
Warm Regards, Caleb Jorden cjorden@gmail.com
On Wed, 2025-02-12 at 22:26 -0600, Caleb Jorden wrote:
External email : Please do not click links or open attachments until you have verified the sender or the content.
On Wed, Feb 12, 2025 at 9:50 PM Caleb Jorden cjorden@gmail.com wrote:
On Wed, Feb 12, 2025 at 9:43 PM Mingyen Hsieh (謝明諺) Mingyen.Hsieh@mediatek.com wrote:
On Wed, 2025-02-12 at 21:16 -0600, Caleb Jorden wrote:
External email : Please do not click links or open attachments until you have verified the sender or the content.
Hello Kernel team,
I discovered that the 6.13.2 kernel breaks my laptop's wireless. Here are the details of my system:
- Framework 13 (AMD Ryzen 7840)
- mt7925e wireless card (purchased from:
https://urldefense.com/v3/__https://www.amazon.com/dp/B0DP68GV9V__ ;!! CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJZOJVng1dxSh_2yZLKT8S8DkDE wjaGvl cmALUeik84J7ePLJnvOe-2oNQ7dxCM$ )
- Arch Linux, using IWD (3.3) to manage Wireless network
connectivity
When running the 6.13.0 and 6.13.1 kernels (from Arch), the wireless adapter worked very well. I was able to associate to my Wifi 7 network (Ubiquiti U7 Pros) and operate in the 6GHz spectrum with 160MHz channels. I also have an older wireless network that runs on Google Nest routers.
When I upgraded to the 6.13.2 kernel from Arch Linux, my wireless suddenly stopped working. I looked at the kernel logs and saw these messages (wireless addresses changed to make clearer the different points):
[ 10.007185] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.376446] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.384610] wlan0: 28:80:xx:yy:zz:6e denied authentication (status 77) [ 10.483900] wlan0: authenticate with 28:80:xx:yy:zz:6e (local address=40:1a:58:aa:bb:cc) [ 10.490138] wlan0: send auth to 28:80:xx:yy:zz:6e (try 1/3) [ 10.507531] wlan0: send auth to 28:80:xx:yy:zz:6e (try 2/3) [ 10.525580] wlan0: send auth to 28:80:xx:yy:zz:6e (try 3/3) [ 10.543048] wlan0: authentication with 28:80:xx:yy:zz:6e timed out [ 10.619423] wlan0: authenticate with 28:80:aa:bb:cc:e1 (local address=40:1a:58:aa:bb:cc) [ 10.749880] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 1/3) [ 10.768530] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 2/3) [ 10.786954] wlan0: send auth to 28:80:aa:bb:cc:e1 (try 3/3) [ 10.805792] wlan0: authentication with 28:80:aa:bb:cc:e1 timed out [ 10.881620] wlan0: authenticate with 28:80:ee:ff:gg:6d (local address=40:1a:58:aa:bb:cc) [ 11.016891] wlan0: send auth to 28:80:ee:ff:gg:6d (try 1/3) [ 11.033622] wlan0: send auth to 28:80:ee:ff:gg:6d (try 2/3) [ 11.050574] wlan0: send auth to 28:80:ee:ff:gg:6d (try 3/3) [ 11.065250] wlan0: authentication with 28:80:ee:ff:gg:6d timed out [ 11.139745] wlan0: authenticate with 2a:80:hh:ii:jj:6f (local address=40:1a:58:aa:bb:cc) [ 11.506205] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 1/3) [ 11.528071] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 2/3) [ 11.550043] wlan0: send auth to 2a:80:hh:ii:jj:6f (try 3/3) [ 11.572005] wlan0: authentication with 2a:80:hh:ii:jj:6f timed out [ 16.312942] wlan0: authenticate with 2a:80:kk:ll:mm:e3 (local address=40:1a:58:aa:bb:cc) [ 16.675865] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 1/3) [ 16.702328] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 2/3) [ 16.726162] wlan0: send auth to 2a:80:kk:ll:mm:e3 (try 3/3) [ 16.748958] wlan0: authentication with 2a:80:kk:ll:mm:e3 timed out [ 16.829874] wlan0: authenticate with 2a:80:nn:oo:pp:e2 (local address=40:1a:58:aa:bb:cc) [ 17.196579] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 1/3) [ 17.214256] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 2/3) [ 17.231852] wlan0: send auth to 2a:80:nn:oo:pp:e2 (try 3/3) [ 17.250116] wlan0: authentication with 2a:80:nn:oo:pp:e2 timed out
Then IWD seems to have stopped attempting to associate for some time. My wireless interface showed link down, and I had no IP address. I attempted to associate to my older Google Nest network, but that also failed with the same behavior (thus showing the problem not to be Wifi 7 or Ubiquiti-specific).
I compiled up the mainline 6.13.2 kernel myself and saw the same behavior.
I then went back to the Arch 6.13.1 kernel, and the system operated perfectly fine as expected.
I bisected the break to this commit:
$ git bisect good c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 is the first bad commit commit c76fba3b07c7fb841c4f8f2acc0f01ff3cf73674 Author: Ming Yen Hsieh mingyen.hsieh@mediatek.com Date: Tue Dec 10 17:19:25 2024 -0800
wifi: mt76: mt7925: Cleanup MLO settings post-disconnection
[ Upstream commit 816161051a039eeb1226fc85e2b38389f508906c ]
Clean up MLO settings after disconnection.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Signed-off-by: Sean Wang sean.wang@mediatek.com Link: https://urldefense.com/v3/__https://patch.msgid.link/20241211011926.5 002-16- sean.wang@kernel.org__;!!CTRNKA9wMg0ARbw!nB_7DXY8l5AYSvgN3AMFpJ ZOJVng 1dxSh_2yZLKT8S8DkDEwjaGvlcmALUeik84J7ePLJnvOe-2okec0mTc$ Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 37 +++++++++++++++++++++++++++++++++++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 ++-- drivers/net/wireless/mediatek/mt76/mt7925/mcu.h | 2 +- 3 files changed, 38 insertions(+), 5 deletions(-)
I attempted to revert this commit on top of 6.13.2, but there are other commits that modify these files, so it can not be reverted by itself. I looked at the commit, and a thought occurred to me that maybe wpa_supplicant might still function even though iwd did not.
I set up wpa_supplicant, and found that I was able to associate and pass network traffic. HOWEVER, when running a simple iperf3 test, saw very slow speeds while associated (about 10 times slower than seen with the 6.13.1 kernel). Thus, I think this is quite clearly a regression. My guess is that this wireless adapter is new enough that many people have yet to hit this.
Here are the details of the card: # dmesg | grep mt79: [ 12.617246] mt7925e 0000:01:00.0: enabling device (0000 -> 0002) [ 12.622426] mt7925e 0000:01:00.0: ASIC revision: 79250000 [ 12.698681] mt7925e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20241104132949a [ 13.047884] mt7925e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20241104133053
# lspci -vvv (mediatek device): 01:00.0 Network controller: MEDIATEK Corp. Device 7925 (rev 01) Subsystem: Hewlett-Packard Company Device 8c38 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 116 IOMMU group: 12 Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=2M] Region 2: Memory at 90800000 (64-bit, non-prefetchable) [size=32K] Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [e0] MSI: Enable+ Count=1/32 Maskable+ 64bit+ Address: 00000000fee00000 Data: 0000 Masking: fffffffe Pending: 00000000 Capabilities: [f8] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Vendor Specific Information: ID=1556 Rev=1 Len=008 <?> Capabilities: [108 v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [110 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=3us PortTPowerOnTime=52us L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ T_CommonMode=0us LTR1.2_Threshold=166912ns L1SubCtl2: T_PwrOn=150us Capabilities: [200 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: mt7925e Kernel modules: mt7925e
On my system, /etc/iwd/main.conf contains:
[Scan] DisablePeriodicScan=true
[General] EnableNetworkConfiguration=true Country=US
At this point my suggestion is that the v6.13.2 mt7925 changes should be reverted from the stable series for now, unless a fix can be quickly found. I have not yet tested 6.14-rc2, but would be willing to do so if it would be helpful.
Note: I am not subscribed to any of these lists, so please CC me if you want to contact me about this.
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hi Caleb,
Here are some patches are currently ongoing. Could you please apply these patches and try again?
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-wirel...
Thanks~
Best Regards, Yen.
Hi Yen,
Thank you for getting back to me so quickly. However, I can't apply these patches to the v6.13.2 kernel. It appears that these apply cleanly to the v6.14-rc2 kernel, but the stable series seems to have only a subset of those changes. Is this what you expect, or am I missing something?
Respectfully submitted, Caleb Jorden cjorden@gmail.com
Hello again,
I decided to test the 6.14-rc2 kernel, and found it is broken just like the 6.13.2 kernel.
I then tried applying the patches found here:
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-wirel...
as suggested by Yen on top of 6.14-rc2, and everything seems to be working normally again! Speed seems to be very good (possibly better than even 6.13.1).
So, I would suggest the 6.14 series pick up that set of patches.
For the stable 6.13.y series, it appears that either these patches (and any necessary predecessors) need to be applied, or the changes for the mt7925 driver introduced by 6.13.2 need to be reverted in order to fix the currently-broken state.
If there is any further checking I can do that would be helpful, please let me know.
Warm Regards, Caleb Jorden cjorden@gmail.com
Hi Caleb,
Thanks for your test.
I agree that these patches should go into 6.14 and be ported to 6.13 and 6.12.
Could you help me identify which patch can't be applied to 6.13.2? I think it is the first one.
Best Regards, Yen.
I ran into this same issue this weekend. I tested v4 of the patchset at https://patchwork.kernel.org/project/linux-wireless/list/?series=937821. On 6.13.5 with gentoo's patchset, the conflict I encountered was at https://patchwork.kernel.org/project/linux-wireless/patch/20250226025647.102..., specifically the hunk:
@@ -134,6 +141,7 @@ struct mt792x_vif {
struct mt792x_phy *phy; u16 valid_links; u8 deflink_id; + enum mt792x_mlo_pm_state mlo_pm_state;
struct work_struct csa_work;
The issue is that the mt792x_vif structure has changed significantly between 6.13 and mt76 HEAD, so I had to manually merge the patch myself (which wasn't particularly difficult, but it's worth knowing).
linux-stable-mirror@lists.linaro.org
-
Caleb Jorden -
David Ruth -
Mingyen Hsieh (謝明諺)