Hyper-V driver has advertised support for multi-MSI, but any attempt at using the feature would fallback to a single MSI (non-starter for devices that require multi-MSI). The fallback also covered up other bugs related to multi-MSI functionality rooted in the driver not being able to tell MSIs apart.
These patches fix those bugs by enabling hv multi-MSI through IOMMU remapping, distinguishing multi-MSIs from the initial MSI of the MSI block, preventing retargeting of MSI subsets from invalidating the IRTE block, and aiding hypervisor to preserve the block of requests.
Tested on 5.10.130
Jeffrey Hugo (4): PCI: hv: Fix multi-MSI to allow more than one MSI vector PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI PCI: hv: Reuse existing IRTE allocation in compose_msi_msg() PCI: hv: Fix interrupt mapping for multi-MSI
drivers/pci/controller/pci-hyperv.c | 99 +++++++++++++++++++++-------- 1 file changed, 73 insertions(+), 26 deletions(-)
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit 08e61e861a0e47e5e1a3fb78406afd6b0cea6b6d upstream.
If the allocation of multiple MSI vectors for multi-MSI fails in the core PCI framework, the framework will retry the allocation as a single MSI vector, assuming that meets the min_vecs specified by the requesting driver.
Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR domain to implement that for x86. The VECTOR domain does not support multi-MSI, so the alloc will always fail and fallback to a single MSI allocation.
In short, Hyper-V advertises a capability it does not implement.
Hyper-V can support multi-MSI because it coordinates with the hypervisor to map the MSIs in the IOMMU's interrupt remapper, which is something the VECTOR domain does not have. Therefore the fix is simple - copy what the x86 IOMMU drivers (AMD/Intel-IR) do by removing X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's pci_msi_prepare().
5.10 backport - adds the hv_msi_prepare wrapper function
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Dexuan Cui decui@microsoft.com Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- drivers/pci/controller/pci-hyperv.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index a070e69bb49c..292cdc3fe347 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1180,6 +1180,21 @@ static void hv_irq_mask(struct irq_data *data) pci_msi_mask_irq(data); }
+static int hv_msi_prepare(struct irq_domain *domain, struct device *dev, + int nvec, msi_alloc_info_t *info) +{ + int ret = pci_msi_prepare(domain, dev, nvec, info); + + /* + * By using the interrupt remapper in the hypervisor IOMMU, contiguous + * CPU vectors is not neeted for multi-MSI + */ + if (info->type == X86_IRQ_ALLOC_TYPE_PCI_MSI) + info->flags &= ~X86_IRQ_ALLOC_CONTIGUOUS_VECTORS; + + return ret; +} + /** * hv_irq_unmask() - "Unmask" the IRQ by setting its current * affinity. @@ -1545,7 +1560,7 @@ static struct irq_chip hv_msi_irq_chip = { };
static struct msi_domain_ops hv_msi_ops = { - .msi_prepare = pci_msi_prepare, + .msi_prepare = hv_msi_prepare, .msi_free = hv_msi_free, };
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit 455880dfe292a2bdd3b4ad6a107299fce610e64b upstream.
In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first MSI of the N allocated. This is because only the first msi_desc is cached and it is shared by all the MSIs of the multi-MSI block. This means that hv_arch_irq_unmask() gets the correct address, but the wrong data (always 0).
This can break MSIs.
Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.
hv_arch_irq_unmask() is called on MSI0. It uses a hypercall to configure the MSI address and data (0) to vector 34 of CPU0. This is correct. Then hv_arch_irq_unmask is called on MSI1. It uses another hypercall to configure the MSI address and data (0) to vector 33 of CPU0. This is wrong, and results in both MSI0 and MSI1 being routed to vector 33. Linux will observe extra instances of MSI1 and no instances of MSI0 despite the endpoint device behaving correctly.
For the multi-MSI case, we need unique address and data info for each MSI, but the cached msi_desc does not provide that. However, that information can be gotten from the int_desc cached in the chip_data by compose_msi_msg(). Fix the multi-MSI case to use that cached information instead. Since hv_set_msi_entry_from_desc() is no longer applicable, remove it.
5.10 backport - removed unused hv_set_msi_entry_from_desc function from mshyperv.h instead of pci-hyperv.c. msi_entry.address/data.as_uint32 changed to direct reference (as they are u32's, just sans union).
Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- arch/x86/include/asm/mshyperv.h | 7 ------- drivers/pci/controller/pci-hyperv.c | 5 ++++- 2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index 30f76b966857..871a8b06d430 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -247,13 +247,6 @@ bool hv_vcpu_is_preempted(int vcpu); static inline void hv_apic_init(void) {} #endif
-static inline void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry, - struct msi_desc *msi_desc) -{ - msi_entry->address = msi_desc->msg.address_lo; - msi_entry->data = msi_desc->msg.data; -} - #else /* CONFIG_HYPERV */ static inline void hyperv_init(void) {} static inline void hyperv_setup_mmu_ops(void) {} diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 292cdc3fe347..6bcef857ef51 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1210,6 +1210,7 @@ static void hv_irq_unmask(struct irq_data *data) struct msi_desc *msi_desc = irq_data_get_msi_desc(data); struct irq_cfg *cfg = irqd_cfg(data); struct hv_retarget_device_interrupt *params; + struct tran_int_desc *int_desc; struct hv_pcibus_device *hbus; struct cpumask *dest; cpumask_var_t tmp; @@ -1224,6 +1225,7 @@ static void hv_irq_unmask(struct irq_data *data) pdev = msi_desc_to_pci_dev(msi_desc); pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); + int_desc = data->chip_data;
spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
@@ -1231,7 +1233,8 @@ static void hv_irq_unmask(struct irq_data *data) memset(params, 0, sizeof(*params)); params->partition_id = HV_PARTITION_ID_SELF; params->int_entry.source = 1; /* MSI(-X) */ - hv_set_msi_entry_from_desc(¶ms->int_entry.msi_entry, msi_desc); + params->int_entry.msi_entry.address = int_desc->address & 0xffffffff; + params->int_entry.msi_entry.data = int_desc->data; params->device_id = (hbus->hdev->dev_instance.b[5] << 24) | (hbus->hdev->dev_instance.b[4] << 16) | (hbus->hdev->dev_instance.b[7] << 8) |
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit b4b77778ecc5bfbd4e77de1b2fd5c1dd3c655f1f upstream.
Currently if compose_msi_msg() is called multiple times, it will free any previous IRTE allocation, and generate a new allocation. While nothing prevents this from occurring, it is extraneous when Linux could just reuse the existing allocation and avoid a bunch of overhead.
However, when future IRTE allocations operate on blocks of MSIs instead of a single line, freeing the allocation will impact all of the lines. This could cause an issue where an allocation of N MSIs occurs, then some of the lines are retargeted, and finally the allocation is freed/reallocated. The freeing of the allocation removes all of the configuration for the entire block, which requires all the lines to be retargeted, which might not happen since some lines might already be unmasked/active.
Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Dexuan Cui decui@microsoft.com Tested-by: Dexuan Cui decui@microsoft.com Tested-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- drivers/pci/controller/pci-hyperv.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 6bcef857ef51..07348e6124f4 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1409,6 +1409,15 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) u32 size; int ret;
+ /* Reuse the previous allocation */ + if (data->chip_data) { + int_desc = data->chip_data; + msg->address_hi = int_desc->address >> 32; + msg->address_lo = int_desc->address & 0xffffffff; + msg->data = int_desc->data; + return; + } + pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data)); dest = irq_data_get_effective_affinity_mask(data); pbus = pdev->bus; @@ -1418,13 +1427,6 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) if (!hpdev) goto return_null_message;
- /* Free any previous message that might have already been composed. */ - if (data->chip_data) { - int_desc = data->chip_data; - data->chip_data = NULL; - hv_int_desc_free(hpdev, int_desc); - } - int_desc = kzalloc(sizeof(*int_desc), GFP_ATOMIC); if (!int_desc) goto drop_reference;
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit a2bad844a67b1c7740bda63e87453baf63c3a7f7 upstream.
According to Dexuan, the hypervisor folks beleive that multi-msi allocations are not correct. compose_msi_msg() will allocate multi-msi one by one. However, multi-msi is a block of related MSIs, with alignment requirements. In order for the hypervisor to allocate properly aligned and consecutive entries in the IOMMU Interrupt Remapping Table, there should be a single mapping request that requests all of the multi-msi vectors in one shot.
Dexuan suggests detecting the multi-msi case and composing a single request related to the first MSI. Then for the other MSIs in the same block, use the cached information. This appears to be viable, so do it.
5.10 backport - add hv_msi_get_int_vector helper function. Fixed merge conflict due to delivery_mode name change (APIC_DELIVERY_MODE_FIXED is the value given to dest_Fixed). Removed unused variable in hv_compose_msi_msg. Fixed reference to msi_desc->pci to point to the same is_msix variable. Removed changes to compose_msi_req_v3 since it doesn't exist yet.
Suggested-by: Dexuan Cui decui@microsoft.com Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Dexuan Cui decui@microsoft.com Tested-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- drivers/pci/controller/pci-hyperv.c | 61 +++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 07348e6124f4..b05ce7195380 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1118,6 +1118,10 @@ static void hv_int_desc_free(struct hv_pci_dev *hpdev, u8 buffer[sizeof(struct pci_delete_interrupt)]; } ctxt;
+ if (!int_desc->vector_count) { + kfree(int_desc); + return; + } memset(&ctxt, 0, sizeof(ctxt)); int_pkt = (struct pci_delete_interrupt *)&ctxt.pkt.message; int_pkt->message_type.type = @@ -1180,6 +1184,13 @@ static void hv_irq_mask(struct irq_data *data) pci_msi_mask_irq(data); }
+static unsigned int hv_msi_get_int_vector(struct irq_data *data) +{ + struct irq_cfg *cfg = irqd_cfg(data); + + return cfg->vector; +} + static int hv_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec, msi_alloc_info_t *info) { @@ -1335,12 +1346,12 @@ static void hv_pci_compose_compl(void *context, struct pci_response *resp,
static u32 hv_compose_msi_req_v1( struct pci_create_interrupt *int_pkt, struct cpumask *affinity, - u32 slot, u8 vector) + u32 slot, u8 vector, u8 vector_count) { int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE; int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; - int_pkt->int_desc.vector_count = 1; + int_pkt->int_desc.vector_count = vector_count; int_pkt->int_desc.delivery_mode = dest_Fixed;
/* @@ -1354,14 +1365,14 @@ static u32 hv_compose_msi_req_v1(
static u32 hv_compose_msi_req_v2( struct pci_create_interrupt2 *int_pkt, struct cpumask *affinity, - u32 slot, u8 vector) + u32 slot, u8 vector, u8 vector_count) { int cpu;
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE2; int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; - int_pkt->int_desc.vector_count = 1; + int_pkt->int_desc.vector_count = vector_count; int_pkt->int_desc.delivery_mode = dest_Fixed;
/* @@ -1389,7 +1400,6 @@ static u32 hv_compose_msi_req_v2( */ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) { - struct irq_cfg *cfg = irqd_cfg(data); struct hv_pcibus_device *hbus; struct vmbus_channel *channel; struct hv_pci_dev *hpdev; @@ -1398,6 +1408,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) struct cpumask *dest; struct compose_comp_ctxt comp; struct tran_int_desc *int_desc; + struct msi_desc *msi_desc; + u8 vector, vector_count; struct { struct pci_packet pci_pkt; union { @@ -1418,7 +1430,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) return; }
- pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data)); + msi_desc = irq_data_get_msi_desc(data); + pdev = msi_desc_to_pci_dev(msi_desc); dest = irq_data_get_effective_affinity_mask(data); pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); @@ -1431,6 +1444,36 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) if (!int_desc) goto drop_reference;
+ if (!msi_desc->msi_attrib.is_msix && msi_desc->nvec_used > 1) { + /* + * If this is not the first MSI of Multi MSI, we already have + * a mapping. Can exit early. + */ + if (msi_desc->irq != data->irq) { + data->chip_data = int_desc; + int_desc->address = msi_desc->msg.address_lo | + (u64)msi_desc->msg.address_hi << 32; + int_desc->data = msi_desc->msg.data + + (data->irq - msi_desc->irq); + msg->address_hi = msi_desc->msg.address_hi; + msg->address_lo = msi_desc->msg.address_lo; + msg->data = int_desc->data; + put_pcichild(hpdev); + return; + } + /* + * The vector we select here is a dummy value. The correct + * value gets sent to the hypervisor in unmask(). This needs + * to be aligned with the count, and also not zero. Multi-msi + * is powers of 2 up to 32, so 32 will always work here. + */ + vector = 32; + vector_count = msi_desc->nvec_used; + } else { + vector = hv_msi_get_int_vector(data); + vector_count = 1; + } + memset(&ctxt, 0, sizeof(ctxt)); init_completion(&comp.comp_pkt.host_event); ctxt.pci_pkt.completion_func = hv_pci_compose_compl; @@ -1441,7 +1484,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) size = hv_compose_msi_req_v1(&ctxt.int_pkts.v1, dest, hpdev->desc.win_slot.slot, - cfg->vector); + vector, + vector_count); break;
case PCI_PROTOCOL_VERSION_1_2: @@ -1449,7 +1493,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2, dest, hpdev->desc.win_slot.slot, - cfg->vector); + vector, + vector_count); break;
default:
Hyper-V driver has advertised support for multi-MSI, but any attempt at using the feature would fallback to a single MSI (non-starter for devices that require multi-MSI). The fallback also covered up other bugs related to multi-MSI functionality rooted in the driver not being able to tell MSIs apart.
These patches fix those bugs by enabling hv multi-MSI through IOMMU remapping, distinguishing multi-MSIs from the initial MSI of the MSI block, preventing retargeting of MSI subsets from invalidating the IRTE block, and aiding hypervisor to preserve the block of requests.
Tested on 5.10.130
v2: spelling
Jeffrey Hugo (4): PCI: hv: Fix multi-MSI to allow more than one MSI vector PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI PCI: hv: Reuse existing IRTE allocation in compose_msi_msg() PCI: hv: Fix interrupt mapping for multi-MSI
drivers/pci/controller/pci-hyperv.c | 99 +++++++++++++++++++++-------- 1 file changed, 73 insertions(+), 26 deletions(-)
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit 08e61e861a0e47e5e1a3fb78406afd6b0cea6b6d upstream.
If the allocation of multiple MSI vectors for multi-MSI fails in the core PCI framework, the framework will retry the allocation as a single MSI vector, assuming that meets the min_vecs specified by the requesting driver.
Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR domain to implement that for x86. The VECTOR domain does not support multi-MSI, so the alloc will always fail and fallback to a single MSI allocation.
In short, Hyper-V advertises a capability it does not implement.
Hyper-V can support multi-MSI because it coordinates with the hypervisor to map the MSIs in the IOMMU's interrupt remapper, which is something the VECTOR domain does not have. Therefore the fix is simple - copy what the x86 IOMMU drivers (AMD/Intel-IR) do by removing X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's pci_msi_prepare().
5.10 backport - adds the hv_msi_prepare wrapper function
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Dexuan Cui decui@microsoft.com Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- drivers/pci/controller/pci-hyperv.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index a070e69bb49c..84085939769c 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1180,6 +1180,21 @@ static void hv_irq_mask(struct irq_data *data) pci_msi_mask_irq(data); }
+static int hv_msi_prepare(struct irq_domain *domain, struct device *dev, + int nvec, msi_alloc_info_t *info) +{ + int ret = pci_msi_prepare(domain, dev, nvec, info); + + /* + * By using the interrupt remapper in the hypervisor IOMMU, contiguous + * CPU vectors is not needed for multi-MSI + */ + if (info->type == X86_IRQ_ALLOC_TYPE_PCI_MSI) + info->flags &= ~X86_IRQ_ALLOC_CONTIGUOUS_VECTORS; + + return ret; +} + /** * hv_irq_unmask() - "Unmask" the IRQ by setting its current * affinity. @@ -1545,7 +1560,7 @@ static struct irq_chip hv_msi_irq_chip = { };
static struct msi_domain_ops hv_msi_ops = { - .msi_prepare = pci_msi_prepare, + .msi_prepare = hv_msi_prepare, .msi_free = hv_msi_free, };
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit 455880dfe292a2bdd3b4ad6a107299fce610e64b upstream.
In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first MSI of the N allocated. This is because only the first msi_desc is cached and it is shared by all the MSIs of the multi-MSI block. This means that hv_arch_irq_unmask() gets the correct address, but the wrong data (always 0).
This can break MSIs.
Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.
hv_arch_irq_unmask() is called on MSI0. It uses a hypercall to configure the MSI address and data (0) to vector 34 of CPU0. This is correct. Then hv_arch_irq_unmask is called on MSI1. It uses another hypercall to configure the MSI address and data (0) to vector 33 of CPU0. This is wrong, and results in both MSI0 and MSI1 being routed to vector 33. Linux will observe extra instances of MSI1 and no instances of MSI0 despite the endpoint device behaving correctly.
For the multi-MSI case, we need unique address and data info for each MSI, but the cached msi_desc does not provide that. However, that information can be gotten from the int_desc cached in the chip_data by compose_msi_msg(). Fix the multi-MSI case to use that cached information instead. Since hv_set_msi_entry_from_desc() is no longer applicable, remove it.
5.10 backport - removed unused hv_set_msi_entry_from_desc function from mshyperv.h instead of pci-hyperv.c. msi_entry.address/data.as_uint32 changed to direct reference (as they are u32's, just sans union).
Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- arch/x86/include/asm/mshyperv.h | 7 ------- drivers/pci/controller/pci-hyperv.c | 5 ++++- 2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index 30f76b966857..871a8b06d430 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -247,13 +247,6 @@ bool hv_vcpu_is_preempted(int vcpu); static inline void hv_apic_init(void) {} #endif
-static inline void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry, - struct msi_desc *msi_desc) -{ - msi_entry->address = msi_desc->msg.address_lo; - msi_entry->data = msi_desc->msg.data; -} - #else /* CONFIG_HYPERV */ static inline void hyperv_init(void) {} static inline void hyperv_setup_mmu_ops(void) {} diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 84085939769c..a1f27c555aec 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1210,6 +1210,7 @@ static void hv_irq_unmask(struct irq_data *data) struct msi_desc *msi_desc = irq_data_get_msi_desc(data); struct irq_cfg *cfg = irqd_cfg(data); struct hv_retarget_device_interrupt *params; + struct tran_int_desc *int_desc; struct hv_pcibus_device *hbus; struct cpumask *dest; cpumask_var_t tmp; @@ -1224,6 +1225,7 @@ static void hv_irq_unmask(struct irq_data *data) pdev = msi_desc_to_pci_dev(msi_desc); pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); + int_desc = data->chip_data;
spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
@@ -1231,7 +1233,8 @@ static void hv_irq_unmask(struct irq_data *data) memset(params, 0, sizeof(*params)); params->partition_id = HV_PARTITION_ID_SELF; params->int_entry.source = 1; /* MSI(-X) */ - hv_set_msi_entry_from_desc(¶ms->int_entry.msi_entry, msi_desc); + params->int_entry.msi_entry.address = int_desc->address & 0xffffffff; + params->int_entry.msi_entry.data = int_desc->data; params->device_id = (hbus->hdev->dev_instance.b[5] << 24) | (hbus->hdev->dev_instance.b[4] << 16) | (hbus->hdev->dev_instance.b[7] << 8) |
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit b4b77778ecc5bfbd4e77de1b2fd5c1dd3c655f1f upstream.
Currently if compose_msi_msg() is called multiple times, it will free any previous IRTE allocation, and generate a new allocation. While nothing prevents this from occurring, it is extraneous when Linux could just reuse the existing allocation and avoid a bunch of overhead.
However, when future IRTE allocations operate on blocks of MSIs instead of a single line, freeing the allocation will impact all of the lines. This could cause an issue where an allocation of N MSIs occurs, then some of the lines are retargeted, and finally the allocation is freed/reallocated. The freeing of the allocation removes all of the configuration for the entire block, which requires all the lines to be retargeted, which might not happen since some lines might already be unmasked/active.
Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Dexuan Cui decui@microsoft.com Tested-by: Dexuan Cui decui@microsoft.com Tested-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- drivers/pci/controller/pci-hyperv.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index a1f27c555aec..6e2035deb52a 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1409,6 +1409,15 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) u32 size; int ret;
+ /* Reuse the previous allocation */ + if (data->chip_data) { + int_desc = data->chip_data; + msg->address_hi = int_desc->address >> 32; + msg->address_lo = int_desc->address & 0xffffffff; + msg->data = int_desc->data; + return; + } + pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data)); dest = irq_data_get_effective_affinity_mask(data); pbus = pdev->bus; @@ -1418,13 +1427,6 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) if (!hpdev) goto return_null_message;
- /* Free any previous message that might have already been composed. */ - if (data->chip_data) { - int_desc = data->chip_data; - data->chip_data = NULL; - hv_int_desc_free(hpdev, int_desc); - } - int_desc = kzalloc(sizeof(*int_desc), GFP_ATOMIC); if (!int_desc) goto drop_reference;
From: Jeffrey Hugo quic_jhugo@quicinc.com
commit a2bad844a67b1c7740bda63e87453baf63c3a7f7 upstream.
According to Dexuan, the hypervisor folks beleive that multi-msi allocations are not correct. compose_msi_msg() will allocate multi-msi one by one. However, multi-msi is a block of related MSIs, with alignment requirements. In order for the hypervisor to allocate properly aligned and consecutive entries in the IOMMU Interrupt Remapping Table, there should be a single mapping request that requests all of the multi-msi vectors in one shot.
Dexuan suggests detecting the multi-msi case and composing a single request related to the first MSI. Then for the other MSIs in the same block, use the cached information. This appears to be viable, so do it.
5.10 backport - add hv_msi_get_int_vector helper function. Fixed merge conflict due to delivery_mode name change (APIC_DELIVERY_MODE_FIXED is the value given to dest_Fixed). Removed unused variable in hv_compose_msi_msg. Fixed reference to msi_desc->pci to point to the same is_msix variable. Removed changes to compose_msi_req_v3 since it doesn't exist yet.
Suggested-by: Dexuan Cui decui@microsoft.com Signed-off-by: Jeffrey Hugo quic_jhugo@quicinc.com Reviewed-by: Dexuan Cui decui@microsoft.com Tested-by: Michael Kelley mikelley@microsoft.com Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quici... Signed-off-by: Wei Liu wei.liu@kernel.org Signed-off-by: Carl Vanderlip quic_carlv@quicinc.com --- drivers/pci/controller/pci-hyperv.c | 61 +++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 6e2035deb52a..4353443b89d8 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1118,6 +1118,10 @@ static void hv_int_desc_free(struct hv_pci_dev *hpdev, u8 buffer[sizeof(struct pci_delete_interrupt)]; } ctxt;
+ if (!int_desc->vector_count) { + kfree(int_desc); + return; + } memset(&ctxt, 0, sizeof(ctxt)); int_pkt = (struct pci_delete_interrupt *)&ctxt.pkt.message; int_pkt->message_type.type = @@ -1180,6 +1184,13 @@ static void hv_irq_mask(struct irq_data *data) pci_msi_mask_irq(data); }
+static unsigned int hv_msi_get_int_vector(struct irq_data *data) +{ + struct irq_cfg *cfg = irqd_cfg(data); + + return cfg->vector; +} + static int hv_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec, msi_alloc_info_t *info) { @@ -1335,12 +1346,12 @@ static void hv_pci_compose_compl(void *context, struct pci_response *resp,
static u32 hv_compose_msi_req_v1( struct pci_create_interrupt *int_pkt, struct cpumask *affinity, - u32 slot, u8 vector) + u32 slot, u8 vector, u8 vector_count) { int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE; int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; - int_pkt->int_desc.vector_count = 1; + int_pkt->int_desc.vector_count = vector_count; int_pkt->int_desc.delivery_mode = dest_Fixed;
/* @@ -1354,14 +1365,14 @@ static u32 hv_compose_msi_req_v1(
static u32 hv_compose_msi_req_v2( struct pci_create_interrupt2 *int_pkt, struct cpumask *affinity, - u32 slot, u8 vector) + u32 slot, u8 vector, u8 vector_count) { int cpu;
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE2; int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; - int_pkt->int_desc.vector_count = 1; + int_pkt->int_desc.vector_count = vector_count; int_pkt->int_desc.delivery_mode = dest_Fixed;
/* @@ -1389,7 +1400,6 @@ static u32 hv_compose_msi_req_v2( */ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) { - struct irq_cfg *cfg = irqd_cfg(data); struct hv_pcibus_device *hbus; struct vmbus_channel *channel; struct hv_pci_dev *hpdev; @@ -1398,6 +1408,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) struct cpumask *dest; struct compose_comp_ctxt comp; struct tran_int_desc *int_desc; + struct msi_desc *msi_desc; + u8 vector, vector_count; struct { struct pci_packet pci_pkt; union { @@ -1418,7 +1430,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) return; }
- pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data)); + msi_desc = irq_data_get_msi_desc(data); + pdev = msi_desc_to_pci_dev(msi_desc); dest = irq_data_get_effective_affinity_mask(data); pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); @@ -1431,6 +1444,36 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) if (!int_desc) goto drop_reference;
+ if (!msi_desc->msi_attrib.is_msix && msi_desc->nvec_used > 1) { + /* + * If this is not the first MSI of Multi MSI, we already have + * a mapping. Can exit early. + */ + if (msi_desc->irq != data->irq) { + data->chip_data = int_desc; + int_desc->address = msi_desc->msg.address_lo | + (u64)msi_desc->msg.address_hi << 32; + int_desc->data = msi_desc->msg.data + + (data->irq - msi_desc->irq); + msg->address_hi = msi_desc->msg.address_hi; + msg->address_lo = msi_desc->msg.address_lo; + msg->data = int_desc->data; + put_pcichild(hpdev); + return; + } + /* + * The vector we select here is a dummy value. The correct + * value gets sent to the hypervisor in unmask(). This needs + * to be aligned with the count, and also not zero. Multi-msi + * is powers of 2 up to 32, so 32 will always work here. + */ + vector = 32; + vector_count = msi_desc->nvec_used; + } else { + vector = hv_msi_get_int_vector(data); + vector_count = 1; + } + memset(&ctxt, 0, sizeof(ctxt)); init_completion(&comp.comp_pkt.host_event); ctxt.pci_pkt.completion_func = hv_pci_compose_compl; @@ -1441,7 +1484,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) size = hv_compose_msi_req_v1(&ctxt.int_pkts.v1, dest, hpdev->desc.win_slot.slot, - cfg->vector); + vector, + vector_count); break;
case PCI_PROTOCOL_VERSION_1_2: @@ -1449,7 +1493,8 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2, dest, hpdev->desc.win_slot.slot, - cfg->vector); + vector, + vector_count); break;
default:
linux-stable-mirror@lists.linaro.org
-
Carl Vanderlip