From: Jiri Kosina jkosina@suse.cz

commit c8e22b7a1694bb8d025ea636816472739d859145 upstream.

This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") and introduces proper handling of case where there are no detected secondary components, but primary component (enumerated in num_enclosures) does exist. That fix was originally proposed by Ding Hui dinghui@sangfor.com.cn.

Completely ignoring devices that have one primary enclosure and no secondary one results in ses_intf_add() bailing completely

scsi 2:0:0:254: enclosure has no enumerated components scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations such

even on valid configurations with 1 primary and 0 secondary enclosures as below:

# sg_ses /dev/sg0 3PARdata SES 3321 Supported diagnostic pages: Supported Diagnostic Pages [sdp] [0x0] Configuration (SES) [cf] [0x1] Short Enclosure Status (SES) [ses] [0x8] # sg_ses -p cf /dev/sg0 3PARdata SES 3321 Configuration diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 enclosure descriptor list Subenclosure identifier: 0 [primary] relative ES process id: 0, number of ES processes: 1 number of type descriptor headers: 1 enclosure logical identifier (hex): 20000002ac02068d enclosure vendor: 3PARdata product: VV rev: 3321 type descriptor header and text list Element type: Unspecified, subenclosure id: 0 number of possible elements: 1

The changelog for the original fix follows

===== We can get a crash when disconnecting the iSCSI session, the call trace like this:

[ffff00002a00fb70] kfree at ffff00000830e224 [ffff00002a00fba0] ses_intf_remove at ffff000001f200e4 [ffff00002a00fbd0] device_del at ffff0000086b6a98 [ffff00002a00fc50] device_unregister at ffff0000086b6d58 [ffff00002a00fc70] __scsi_remove_device at ffff00000870608c [ffff00002a00fca0] scsi_remove_device at ffff000008706134 [ffff00002a00fcc0] __scsi_remove_target at ffff0000087062e4 [ffff00002a00fd10] scsi_remove_target at ffff0000087064c0 [ffff00002a00fd70] __iscsi_unbind_session at ffff000001c872c4 [ffff00002a00fdb0] process_one_work at ffff00000810f35c [ffff00002a00fe00] worker_thread at ffff00000810f648 [ffff00002a00fe70] kthread at ffff000008116e98

In ses_intf_add, components count could be 0, and kcalloc 0 size scomp, but not saved in edev->component[i].scratch

In this situation, edev->component[0].scratch is an invalid pointer, when kfree it in ses_intf_remove_enclosure, a crash like above would happen The call trace also could be other random cases when kfree cannot catch the invalid pointer

We should not use edev->component[] array when the components count is 0 We also need check index when use edev->component[] array in ses_enclosure_data_process =====

Reported-by: Michal Kolar mich.k@seznam.cz Originally-by: Ding Hui dinghui@sangfor.com.cn Cc: stable@vger.kernel.org Fixes: 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") Signed-off-by: Jiri Kosina jkosina@suse.cz Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2304042122270.29760@cbobk.fhfr.pm Tested-by: Michal Kolar mich.k@seznam.cz Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/ses.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-)

--- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -503,9 +503,6 @@ static int ses_enclosure_find_by_addr(st int i; struct ses_component *scomp;

- if (!edev->component[0].scratch) - return 0; - for (i = 0; i < edev->components; i++) { scomp = edev->component[i].scratch; if (scomp->addr != efd->addr) @@ -596,8 +593,10 @@ static void ses_enclosure_data_process(s components++, type_ptr[0], name); - else + else if (components < edev->components) ecomp = &edev->component[components++]; + else + ecomp = ERR_PTR(-EINVAL);

if (!IS_ERR(ecomp)) { if (addl_desc_ptr) { @@ -728,11 +727,6 @@ static int ses_intf_add(struct device *c components += type_ptr[1]; }

- if (components == 0) { - sdev_printk(KERN_WARNING, sdev, "enclosure has no enumerated components\n"); - goto err_free; - } - ses_dev->page1 = buf; ses_dev->page1_len = len; buf = NULL; @@ -774,9 +768,11 @@ static int ses_intf_add(struct device *c buf = NULL; } page2_not_supported: - scomp = kcalloc(components, sizeof(struct ses_component), GFP_KERNEL); - if (!scomp) - goto err_free; + if (components > 0) { + scomp = kcalloc(components, sizeof(struct ses_component), GFP_KERNEL); + if (!scomp) + goto err_free; + }

edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev), components, &ses_enclosure_callbacks);

From: Waiman Long longman@redhat.com

commit ba9182a89626d5f83c2ee4594f55cb9c1e60f0e2 upstream.

After a successful cpuset_can_attach() call which increments the attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach() will be called later. In cpuset_attach(), tasks in cpuset_attach_wq, if present, will be woken up at the end. That is not the case in cpuset_cancel_attach(). So missed wakeup is possible if the attach operation is somehow cancelled. Fix that by doing the wakeup in cpuset_cancel_attach() as well.

Fixes: e44193d39e8d ("cpuset: let hotplug propagation work wait for task attaching") Signed-off-by: Waiman Long longman@redhat.com Reviewed-by: Michal Koutný mkoutny@suse.com Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/cgroup/cpuset.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -2180,11 +2180,15 @@ out_unlock: static void cpuset_cancel_attach(struct cgroup_taskset *tset) { struct cgroup_subsys_state *css; + struct cpuset *cs;

cgroup_taskset_first(tset, &css); + cs = css_cs(css);

percpu_down_write(&cpuset_rwsem); - css_cs(css)->attach_in_progress--; + cs->attach_in_progress--; + if (!cs->attach_in_progress) + wake_up(&cpuset_attach_wq); percpu_up_write(&cpuset_rwsem); }

From: Kees Cook keescook@chromium.org

[ Upstream commit b13fecb1c3a603c4b8e99b306fecf4f668c11b32 ]

This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well.

Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Acked-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Kees Cook keescook@chromium.org Stable-dep-of: 1fdeb8b9f29d ("wifi: iwl3945: Add missing check for create_singlethread_workqueue") Signed-off-by: Sasha Levin sashal@kernel.org [Tom: fix backport to 5.4.y]

AUTOSEL backport to 5.4.y of: b13fecb1c3a6 ("treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()") changed all locations of DECLARE_TASKLET with DECLARE_TASKLET_OLD, except one, in arch/mips/lasat/pcivue_proc.c.

This is due to: 10760dde9be3 ("MIPS: Remove support for LASAT") preceeding b13fecb1c3a6 ("treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()") upstream and the former not being present in 5.4.y.

Fix this by changing DECLARE_TASKLET to DECLARE_TASKLET_OLD in arch/mips/lasat/pcivue_proc.c.

Fixes: 5de7a4254eb2 ("treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()") Reported-by: "kernelci.org bot" bot@kernelci.org Signed-off-by: Tom Saeger tom.saeger@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/mips/lasat/picvue_proc.c | 2 +- drivers/input/keyboard/omap-keypad.c | 2 +- drivers/input/serio/hil_mlc.c | 2 +- drivers/net/wan/farsync.c | 4 ++-- drivers/s390/crypto/ap_bus.c | 2 +- drivers/staging/most/dim2/dim2.c | 2 +- drivers/staging/octeon/ethernet-tx.c | 2 +- drivers/tty/vt/keyboard.c | 2 +- drivers/usb/gadget/udc/snps_udc_core.c | 2 +- drivers/usb/host/fhci-sched.c | 2 +- include/linux/interrupt.h | 15 ++++++++++----- kernel/backtracetest.c | 2 +- kernel/debug/debug_core.c | 2 +- kernel/irq/resend.c | 2 +- net/atm/pppoatm.c | 2 +- net/iucv/iucv.c | 2 +- sound/drivers/pcsp/pcsp_lib.c | 2 +- 17 files changed, 27 insertions(+), 22 deletions(-)

--- a/arch/mips/lasat/picvue_proc.c +++ b/arch/mips/lasat/picvue_proc.c @@ -39,7 +39,7 @@ static void pvc_display(unsigned long da pvc_write_string(pvc_lines[i], 0, i); }

-static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0); +static DECLARE_TASKLET_OLD(pvc_display_tasklet, &pvc_display);

static int pvc_line_proc_show(struct seq_file *m, void *v) { --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -46,7 +46,7 @@ struct omap_kp { unsigned short keymap[]; };

-static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0); +static DECLARE_TASKLET_DISABLED_OLD(kp_tasklet, omap_kp_tasklet);

static unsigned int *row_gpios; static unsigned int *col_gpios; --- a/drivers/input/serio/hil_mlc.c +++ b/drivers/input/serio/hil_mlc.c @@ -77,7 +77,7 @@ static struct timer_list hil_mlcs_kicker static int hil_mlcs_probe, hil_mlc_stop;

static void hil_mlcs_process(unsigned long unused); -static DECLARE_TASKLET_DISABLED(hil_mlcs_tasklet, hil_mlcs_process, 0); +static DECLARE_TASKLET_DISABLED_OLD(hil_mlcs_tasklet, hil_mlcs_process);

/* #define HIL_MLC_DEBUG */ --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -569,8 +569,8 @@ static void do_bottom_half_rx(struct fst static void fst_process_tx_work_q(unsigned long work_q); static void fst_process_int_work_q(unsigned long work_q);

-static DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0); -static DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0); +static DECLARE_TASKLET_OLD(fst_tx_task, fst_process_tx_work_q); +static DECLARE_TASKLET_OLD(fst_int_task, fst_process_int_work_q);

static struct fst_card_info *fst_card_array[FST_MAX_CARDS]; static spinlock_t fst_work_q_lock; --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -91,7 +91,7 @@ static DECLARE_WORK(ap_scan_work, ap_sca * Tasklet & timer for AP request polling and interrupts */ static void ap_tasklet_fn(unsigned long); -static DECLARE_TASKLET(ap_tasklet, ap_tasklet_fn, 0); +static DECLARE_TASKLET_OLD(ap_tasklet, ap_tasklet_fn); static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait); static struct task_struct *ap_poll_kthread; static DEFINE_MUTEX(ap_poll_thread_mutex); --- a/drivers/staging/most/dim2/dim2.c +++ b/drivers/staging/most/dim2/dim2.c @@ -47,7 +47,7 @@ MODULE_PARM_DESC(fcnt, "Num of frames pe static DEFINE_SPINLOCK(dim_lock);

static void dim2_tasklet_fn(unsigned long data); -static DECLARE_TASKLET(dim2_tasklet, dim2_tasklet_fn, 0); +static DECLARE_TASKLET_OLD(dim2_tasklet, dim2_tasklet_fn);

/** * struct hdm_channel - private structure to keep channel specific data --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -41,7 +41,7 @@ #endif

static void cvm_oct_tx_do_cleanup(unsigned long arg); -static DECLARE_TASKLET(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup, 0); +static DECLARE_TASKLET_OLD(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup);

/* Maximum number of SKBs to try to free per xmit packet. */ #define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2) --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1241,7 +1241,7 @@ static void kbd_bh(unsigned long dummy) } }

-DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0); +DECLARE_TASKLET_DISABLED_OLD(keyboard_tasklet, kbd_bh);

#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ --- a/drivers/usb/gadget/udc/snps_udc_core.c +++ b/drivers/usb/gadget/udc/snps_udc_core.c @@ -96,7 +96,7 @@ static int stop_pollstall_timer; static DECLARE_COMPLETION(on_pollstall_exit);

/* tasklet for usb disconnect */ -static DECLARE_TASKLET(disconnect_tasklet, udc_tasklet_disconnect, 0); +static DECLARE_TASKLET_OLD(disconnect_tasklet, udc_tasklet_disconnect);

/* endpoint names used for print */ static const char ep0_string[] = "ep0in"; --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -677,7 +677,7 @@ static void process_done_list(unsigned l enable_irq(fhci_to_hcd(fhci)->irq); }

-DECLARE_TASKLET(fhci_tasklet, process_done_list, 0); +DECLARE_TASKLET_OLD(fhci_tasklet, process_done_list);

/* transfer complted callback */ u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci) --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -598,12 +598,17 @@ struct tasklet_struct unsigned long data; };

-#define DECLARE_TASKLET(name, func, data) \ -struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data } - -#define DECLARE_TASKLET_DISABLED(name, func, data) \ -struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data } +#define DECLARE_TASKLET_OLD(name, _func) \ +struct tasklet_struct name = { \ + .count = ATOMIC_INIT(0), \ + .func = _func, \ +}

+#define DECLARE_TASKLET_DISABLED_OLD(name, _func) \ +struct tasklet_struct name = { \ + .count = ATOMIC_INIT(1), \ + .func = _func, \ +}

enum { --- a/kernel/backtracetest.c +++ b/kernel/backtracetest.c @@ -29,7 +29,7 @@ static void backtrace_test_irq_callback( complete(&backtrace_work); }

-static DECLARE_TASKLET(backtrace_tasklet, &backtrace_test_irq_callback, 0); +static DECLARE_TASKLET_OLD(backtrace_tasklet, &backtrace_test_irq_callback);

static void backtrace_test_irq(void) { --- a/kernel/debug/debug_core.c +++ b/kernel/debug/debug_core.c @@ -1043,7 +1043,7 @@ static void kgdb_tasklet_bpt(unsigned lo atomic_set(&kgdb_break_tasklet_var, 0); }

-static DECLARE_TASKLET(kgdb_tasklet_breakpoint, kgdb_tasklet_bpt, 0); +static DECLARE_TASKLET_OLD(kgdb_tasklet_breakpoint, kgdb_tasklet_bpt);

void kgdb_schedule_breakpoint(void) { --- a/kernel/irq/resend.c +++ b/kernel/irq/resend.c @@ -45,7 +45,7 @@ static void resend_irqs(unsigned long ar }

/* Tasklet to handle resend: */ -static DECLARE_TASKLET(resend_tasklet, resend_irqs, 0); +static DECLARE_TASKLET_OLD(resend_tasklet, resend_irqs);

#endif

--- a/net/atm/pppoatm.c +++ b/net/atm/pppoatm.c @@ -393,7 +393,7 @@ static int pppoatm_assign_vcc(struct atm * Each PPPoATM instance has its own tasklet - this is just a * prototypical one used to initialize them */ - static const DECLARE_TASKLET(tasklet_proto, pppoatm_wakeup_sender, 0); + static const DECLARE_TASKLET_OLD(tasklet_proto, pppoatm_wakeup_sender); if (copy_from_user(&be, arg, sizeof be)) return -EFAULT; if (be.encaps != PPPOATM_ENCAPS_AUTODETECT && --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -128,7 +128,7 @@ static LIST_HEAD(iucv_task_queue); * The tasklet for fast delivery of iucv interrupts. */ static void iucv_tasklet_fn(unsigned long); -static DECLARE_TASKLET(iucv_tasklet, iucv_tasklet_fn,0); +static DECLARE_TASKLET_OLD(iucv_tasklet, iucv_tasklet_fn);

/* * Queue of interrupt buffers for delivery via a work queue --- a/sound/drivers/pcsp/pcsp_lib.c +++ b/sound/drivers/pcsp/pcsp_lib.c @@ -36,7 +36,7 @@ static void pcsp_call_pcm_elapsed(unsign } }

-static DECLARE_TASKLET(pcsp_pcm_tasklet, pcsp_call_pcm_elapsed, 0); +static DECLARE_TASKLET_OLD(pcsp_pcm_tasklet, pcsp_call_pcm_elapsed);

/* write the port and returns the next expire time in ns; * called at the trigger-start and in hrtimer callback

From: Linus Walleij linus.walleij@linaro.org

[ Upstream commit e81376ebbafc679a5cea65f25f5ab242172f52df ]

This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.

Signed-off-by: Linus Walleij linus.walleij@linaro.org Cc: Shyam Sundar S K Shyam-sundar.S-k@amd.com Cc: Sandeep Singh sandeep.singh@amd.com Link: https://lore.kernel.org/r/20200722101545.144373-1-linus.walleij@linaro.org Stable-dep-of: b26cd9325be4 ("pinctrl: amd: Disable and mask interrupts on resume") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-amd.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index ca3f18aa16acb..c4e1ebd6e4ea1 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -852,6 +852,7 @@ static int amd_gpio_probe(struct platform_device *pdev) int irq_base; struct resource *res; struct amd_gpio *gpio_dev; + struct gpio_irq_chip *girq;

gpio_dev = devm_kzalloc(&pdev->dev, sizeof(struct amd_gpio), GFP_KERNEL); @@ -913,6 +914,15 @@ static int amd_gpio_probe(struct platform_device *pdev) return PTR_ERR(gpio_dev->pctrl); }

+ girq = &gpio_dev->gc.irq; + girq->chip = &amd_gpio_irqchip; + /* This will let us handle the parent IRQ in the driver */ + girq->parent_handler = NULL; + girq->num_parents = 0; + girq->parents = NULL; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_simple_irq; + ret = gpiochip_add_data(&gpio_dev->gc, gpio_dev); if (ret) return ret; @@ -924,17 +934,6 @@ static int amd_gpio_probe(struct platform_device *pdev) goto out2; }

- ret = gpiochip_irqchip_add(&gpio_dev->gc, - &amd_gpio_irqchip, - 0, - handle_simple_irq, - IRQ_TYPE_NONE); - if (ret) { - dev_err(&pdev->dev, "could not add irqchip\n"); - ret = -ENODEV; - goto out2; - } - ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, IRQF_SHARED, KBUILD_MODNAME, gpio_dev); if (ret)

From: Kornel Dulęba korneld@chromium.org

[ Upstream commit b26cd9325be4c1fcd331b77f10acb627c560d4d7 ]

This fixes a similar problem to the one observed in: commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe").

On some systems, during suspend/resume cycle firmware leaves an interrupt enabled on a pin that is not used by the kernel. This confuses the AMD pinctrl driver and causes spurious interrupts.

The driver already has logic to detect if a pin is used by the kernel. Leverage it to re-initialize interrupt fields of a pin only if it's not used by us.

Cc: stable@vger.kernel.org Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.") Signed-off-by: Kornel Dulęba korneld@chromium.org Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-amd.c | 36 +++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 887dc57704402..347ec9adbdc29 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -770,32 +770,34 @@ static const struct pinconf_ops amd_pinconf_ops = { .pin_config_group_set = amd_pinconf_group_set, };

-static void amd_gpio_irq_init(struct amd_gpio *gpio_dev) +static void amd_gpio_irq_init_pin(struct amd_gpio *gpio_dev, int pin) { - struct pinctrl_desc *desc = gpio_dev->pctrl->desc; + const struct pin_desc *pd; unsigned long flags; u32 pin_reg, mask; - int i;

mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) | BIT(INTERRUPT_MASK_OFF) | BIT(INTERRUPT_ENABLE_OFF) | BIT(WAKE_CNTRL_OFF_S4);

- for (i = 0; i < desc->npins; i++) { - int pin = desc->pins[i].number; - const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin); - - if (!pd) - continue; + pd = pin_desc_get(gpio_dev->pctrl, pin); + if (!pd) + return;

- raw_spin_lock_irqsave(&gpio_dev->lock, flags); + raw_spin_lock_irqsave(&gpio_dev->lock, flags); + pin_reg = readl(gpio_dev->base + pin * 4); + pin_reg &= ~mask; + writel(pin_reg, gpio_dev->base + pin * 4); + raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); +}

- pin_reg = readl(gpio_dev->base + i * 4); - pin_reg &= ~mask; - writel(pin_reg, gpio_dev->base + i * 4); +static void amd_gpio_irq_init(struct amd_gpio *gpio_dev) +{ + struct pinctrl_desc *desc = gpio_dev->pctrl->desc; + int i;

- raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); - } + for (i = 0; i < desc->npins; i++) + amd_gpio_irq_init_pin(gpio_dev, i); }

#ifdef CONFIG_PM_SLEEP @@ -848,8 +850,10 @@ static int amd_gpio_resume(struct device *dev) for (i = 0; i < desc->npins; i++) { int pin = desc->pins[i].number;

- if (!amd_gpio_should_save(gpio_dev, pin)) + if (!amd_gpio_should_save(gpio_dev, pin)) { + amd_gpio_irq_init_pin(gpio_dev, pin); continue; + }

raw_spin_lock_irqsave(&gpio_dev->lock, flags); gpio_dev->saved_regs[i] |= readl(gpio_dev->base + pin * 4) & PIN_IRQ_PENDING;

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit 2be4dcf6627e1bcbbef8e6ba1811f5127d39202c ]

The driver only supports normal polarity. Complete the implementation of .get_state() by setting .polarity accordingly.

Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support") Link: https://lore.kernel.org/r/20230228135508.1798428-5-u.kleine-koenig@pengutron... Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-sprd.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/pwm/pwm-sprd.c b/drivers/pwm/pwm-sprd.c index 892d853d48a1a..b30d664bf7d57 100644 --- a/drivers/pwm/pwm-sprd.c +++ b/drivers/pwm/pwm-sprd.c @@ -109,6 +109,7 @@ static void sprd_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, duty = val & SPRD_PWM_DUTY_MSK; tmp = (prescale + 1) * NSEC_PER_SEC * duty; state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate); + state->polarity = PWM_POLARITY_NORMAL;

/* Disable PWM clocks if the PWM channel is not in enable state. */ if (!state->enabled)

From: Eric Dumazet edumazet@google.com

[ Upstream commit 7d63b67125382ff0ffdfca434acbc94a38bd092b ]

syzbot was able to trigger a panic [1] in icmp_glue_bits(), or more exactly in skb_copy_and_csum_bits()

There is no repro yet, but I think the issue is that syzbot manages to lower device mtu to a small value, fooling __icmp_send()

__icmp_send() must make sure there is enough room for the packet to include at least the headers.

We might in the future refactor skb_copy_and_csum_bits() and its callers to no longer crash when something bad happens.

[1] kernel BUG at net/core/skbuff.c:3343 ! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd5121 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343 Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff RSP: 0018:ffffc90000007620 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100 RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353 __ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161 ip_append_data net/ipv4/ip_output.c:1343 [inline] ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322 icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370 __icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765 ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline] ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246 dst_link_failure include/net/dst.h:423 [inline] arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296 neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079 neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/icmp.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index b44f51e404aee..ac82a4158b86b 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -754,6 +754,11 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info, room = 576; room -= sizeof(struct iphdr) + icmp_param.replyopts.opt.opt.optlen; room -= sizeof(struct icmphdr); + /* Guard against tiny mtu. We need to include at least one + * IP network header for this message to make any sense. + */ + if (room <= (int)sizeof(struct iphdr)) + goto ende;

icmp_param.data_len = skb_in->len - icmp_param.offset; if (icmp_param.data_len > room)

From: Xin Long lucien.xin@gmail.com

[ Upstream commit 2584024b23552c00d95b50255e47bd18d306d31a ]

This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf.

When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK.

However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below:

KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745

The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf.

Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/socket.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/net/sctp/socket.c b/net/sctp/socket.c index c76b40322ac7d..36db659a0f7f4 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1850,6 +1850,10 @@ static int sctp_sendmsg_to_asoc(struct sctp_association *asoc, err = sctp_wait_for_sndbuf(asoc, &timeo, msg_len); if (err) goto err; + if (unlikely(sinfo->sinfo_stream >= asoc->stream.outcnt)) { + err = -EINVAL; + goto err; + } }

if (sctp_state(asoc, CLOSED)) {

From: Dhruva Gole d-gole@ti.com

[ Upstream commit 7b75c4703609a3ebaf67271813521bc0281e1ec1 ]

Add the IRQCHIP_SKIP_SET_WAKE flag since there are no special IRQ Wake bits that can be set to enable wakeup IRQ.

Fixes: 3d9edf09d452 ("[ARM] 4457/2: davinci: GPIO support") Signed-off-by: Dhruva Gole d-gole@ti.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index e0b0256896250..576cb2d0708f6 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -333,7 +333,7 @@ static struct irq_chip gpio_irqchip = { .irq_enable = gpio_irq_enable, .irq_disable = gpio_irq_disable, .irq_set_type = gpio_irq_type, - .flags = IRQCHIP_SET_TYPE_MASKED, + .flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_SKIP_SET_WAKE, };

static void gpio_irq_handler(struct irq_desc *desc)

From: Dai Ngo dai.ngo@oracle.com

[ Upstream commit 7de82c2f36fb26aa78440bbf0efcf360b691d98b ]

Currently callback request does not use the credential specified in CREATE_SESSION if the security flavor for the back channel is AUTH_SYS.

Problem was discovered by pynfs 4.1 DELEG5 and DELEG7 test with error: DELEG5 st_delegation.testCBSecParms : FAILURE expected callback with uid, gid == 17, 19, got 0, 0

Signed-off-by: Dai Ngo dai.ngo@oracle.com Reviewed-by: Jeff Layton jlayton@kernel.org Fixes: 8276c902bbe9 ("SUNRPC: remove uid and gid from struct auth_cred") Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/nfs4callback.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index ffc2b838b123c..771733396eab2 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -840,8 +840,8 @@ static const struct cred *get_backchannel_cred(struct nfs4_client *clp, struct r if (!kcred) return NULL;

- kcred->uid = ses->se_cb_sec.uid; - kcred->gid = ses->se_cb_sec.gid; + kcred->fsuid = ses->se_cb_sec.uid; + kcred->fsgid = ses->se_cb_sec.gid; return kcred; } }

From: Kees Jan Koster kjkoster@kjkoster.org

commit 71f8afa2b66e356f435b6141b4a9ccf953e18356 upstream.

The Silicon Labs IFS-USB-DATACABLE is used in conjunction with for example the Quint UPSes. It is used to enable Modbus communication with the UPS to query configuration, power and battery status.

Signed-off-by: Kees Jan Koster kjkoster@kjkoster.org Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -121,6 +121,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */ { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */ { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */ { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */

From: Enrico Sau enrico.sau@gmail.com

commit 773e8e7d07b753474b2ccd605ff092faaa9e65b9 upstream.

Add the following Telit FE990 compositions:

0x1080: tty, adb, rmnet, tty, tty, tty, tty 0x1081: tty, adb, mbim, tty, tty, tty, tty 0x1082: rndis, tty, adb, tty, tty, tty, tty 0x1083: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Enrico Sau enrico.sau@gmail.com Link: https://lore.kernel.org/r/20230314090059.77876-1-enrico.sau@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1300,6 +1300,14 @@ static const struct usb_device_id option .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */ .driver_info = RSVD(0) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */ + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */ + .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

From: Lars-Peter Clausen lars@metafoo.de

commit 363c7dc72f79edd55bf1c4380e0fbf7f1bbc2c86 upstream.

The ads7950 uses a mutex as well as SPI transfers in its GPIO callbacks. This means these callbacks can sleep and the `can_sleep` flag should be set.

Having the flag set will make sure that warnings are generated when calling any of the callbacks from a potentially non-sleeping context.

Fixes: c97dce792dc8 ("iio: adc: ti-ads7950: add GPIO support") Signed-off-by: Lars-Peter Clausen lars@metafoo.de Acked-by: David Lechner david@lechnology.com Link: https://lore.kernel.org/r/20230312210933.2275376-1-lars@metafoo.de Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/ti-ads7950.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/iio/adc/ti-ads7950.c +++ b/drivers/iio/adc/ti-ads7950.c @@ -635,6 +635,7 @@ static int ti_ads7950_probe(struct spi_d st->chip.label = dev_name(&st->spi->dev); st->chip.parent = &st->spi->dev; st->chip.owner = THIS_MODULE; + st->chip.can_sleep = true; st->chip.base = -1; st->chip.ngpio = TI_ADS7950_NUM_GPIOS; st->chip.get_direction = ti_ads7950_get_direction;

From: Biju Das biju.das.jz@bp.renesas.com

commit b43a18647f03c87e77d50d6fe74904b61b96323e upstream.

The fourth interrupt on SCI port is transmit end interrupt compared to the break interrupt on other port types. So, shuffle the interrupts to fix the transmit end interrupt handler.

Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI") Cc: stable stable@kernel.org Suggested-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Biju Das biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/r/20230317150403.154094-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/sh-sci.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2925,6 +2925,13 @@ static int sci_init_single(struct platfo sci_port->irqs[i] = platform_get_irq(dev, i); }

+ /* + * The fourth interrupt on SCI port is transmit end interrupt, so + * shuffle the interrupts. + */ + if (p->type == PORT_SCI) + swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]); + /* The SCI generates several interrupts. They can be muxed together or * connected to different interrupt lines. In the muxed case only one * interrupt resource is specified as there is only one interrupt ID.

From: Sherry Sun sherry.sun@nxp.com

commit 9425914f3de6febbd6250395f56c8279676d9c3c upstream.

According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to avoid checking for transmission complete when UARTCTRL_SBK is asserted, otherwise the lpuart32_tx_empty may never get TIOCSER_TEMT.

Commit 2411fd94ceaa("tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted") only fix it in lpuart32_set_termios(), here also fix it in lpuart32_tx_empty().

Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable stable@kernel.org Signed-off-by: Sherry Sun sherry.sun@nxp.com Link: https://lore.kernel.org/r/20230323054415.20363-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/fsl_lpuart.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -807,11 +807,17 @@ static unsigned int lpuart32_tx_empty(st struct lpuart_port, port); unsigned long stat = lpuart32_read(port, UARTSTAT); unsigned long sfifo = lpuart32_read(port, UARTFIFO); + unsigned long ctrl = lpuart32_read(port, UARTCTRL);

if (sport->dma_tx_in_progress) return 0;

- if (stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) + /* + * LPUART Transmission Complete Flag may never be set while queuing a break + * character, so avoid checking for transmission complete when UARTCTRL_SBK + * is asserted. + */ + if ((stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) || ctrl & UARTCTRL_SBK) return TIOCSER_TEMT;

return 0;

From: Ryusuke Konishi konishi.ryusuke@gmail.com

commit 42560f9c92cc43dce75dbf06cc0d840dced39b12 upstream.

The current nilfs2 sysfs support has issues with the timing of creation and deletion of sysfs entries, potentially leading to null pointer dereferences, use-after-free, and lockdep warnings.

Some of the sysfs attributes for nilfs2 per-filesystem instance refer to metadata file "cpfile", "sufile", or "dat", but nilfs_sysfs_create_device_group that creates those attributes is executed before the inodes for these metadata files are loaded, and nilfs_sysfs_delete_device_group which deletes these sysfs entries is called after releasing their metadata file inodes.

Therefore, access to some of these sysfs attributes may occur outside of the lifetime of these metadata files, resulting in inode NULL pointer dereferences or use-after-free.

In addition, the call to nilfs_sysfs_create_device_group() is made during the locking period of the semaphore "ns_sem" of nilfs object, so the shrinker call caused by the memory allocation for the sysfs entries, may derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in nilfs_evict_inode()".

Since nilfs2 may acquire "ns_sem" deep in the call stack holding other locks via its error handler __nilfs_error(), this causes lockdep to report circular locking. This is a false positive and no circular locking actually occurs as no inodes exist yet when nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep warnings can be resolved by simply moving the call to nilfs_sysfs_create_device_group() out of "ns_sem".

This fixes these sysfs issues by revising where the device's sysfs interface is created/deleted and keeping its lifetime within the lifetime of the metadata files above.

Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com Fixes: dd70edbde262 ("nilfs2: integrate sysfs support into driver") Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com Cc: Viacheslav Dubeyko slava@dubeyko.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nilfs2/super.c | 2 ++ fs/nilfs2/the_nilfs.c | 12 +++++++----- 2 files changed, 9 insertions(+), 5 deletions(-)

--- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -477,6 +477,7 @@ static void nilfs_put_super(struct super up_write(&nilfs->ns_sem); }

+ nilfs_sysfs_delete_device_group(nilfs); iput(nilfs->ns_sufile); iput(nilfs->ns_cpfile); iput(nilfs->ns_dat); @@ -1103,6 +1104,7 @@ nilfs_fill_super(struct super_block *sb, nilfs_put_root(fsroot);

failed_unload: + nilfs_sysfs_delete_device_group(nilfs); iput(nilfs->ns_sufile); iput(nilfs->ns_cpfile); iput(nilfs->ns_dat); --- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -87,7 +87,6 @@ void destroy_nilfs(struct the_nilfs *nil { might_sleep(); if (nilfs_init(nilfs)) { - nilfs_sysfs_delete_device_group(nilfs); brelse(nilfs->ns_sbh[0]); brelse(nilfs->ns_sbh[1]); } @@ -275,6 +274,10 @@ int load_nilfs(struct the_nilfs *nilfs, goto failed; }

+ err = nilfs_sysfs_create_device_group(sb); + if (unlikely(err)) + goto sysfs_error; + if (valid_fs) goto skip_recovery;

@@ -336,6 +339,9 @@ int load_nilfs(struct the_nilfs *nilfs, goto failed;

failed_unload: + nilfs_sysfs_delete_device_group(nilfs); + + sysfs_error: iput(nilfs->ns_cpfile); iput(nilfs->ns_sufile); iput(nilfs->ns_dat); @@ -668,10 +674,6 @@ int init_nilfs(struct the_nilfs *nilfs, if (err) goto failed_sbh;

- err = nilfs_sysfs_create_device_group(sb); - if (err) - goto failed_sbh; - set_nilfs_init(nilfs); err = 0; out:

From: Kan Liang kan.liang@linux.intel.com

[ Upstream commit 24d3ae2f37d8bc3c14b31d353c5d27baf582b6a6 ]

The same task check in perf_event_set_output has some potential issues for some usages.

For the current perf code, there is a problem if using of perf_event_open() to have multiple samples getting into the same mmap’d memory when they are both attached to the same process. https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/ Because the event->ctx is not ready when the perf_event_set_output() is invoked in the perf_event_open().

Besides the above issue, before the commit bd2756811766 ("perf: Rewrite core context handling"), perf record can errors out when sampling with a hardware event and a software event as below. $ perf record -e cycles,dummy --per-thread ls failed to mmap with 22 (Invalid argument) That's because that prior to the commit a hardware event and a software event are from different task context.

The problem should be a long time issue since commit c3f00c70276d ("perk: Separate find_get_context() from event initialization").

The task struct is stored in the event->hw.target for each per-thread event. It is a more reliable way to determine whether two events are attached to the same task.

The event->hw.target was also introduced several years ago by the commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It can not only be used to fix the issue with the current code, but also back port to fix the issues with an older kernel.

Note: The event->hw.target was introduced later than commit c3f00c70276d. The patch may cannot be applied between the commit c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port this at that period may have to find other solutions.

Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization") Signed-off-by: Kan Liang kan.liang@linux.intel.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Zhengjun Xing zhengjun.xing@linux.intel.com Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c index a1c89b675b0b9..1ef924d6a385e 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -10798,7 +10798,7 @@ perf_event_set_output(struct perf_event *event, struct perf_event *output_event) /* * If its not a per-cpu rb, it must be the same task. */ - if (output_event->cpu == -1 && output_event->ctx != event->ctx) + if (output_event->cpu == -1 && output_event->hw.target != event->hw.target) goto out;

/*

From: Oleksij Rempel o.rempel@pengutronix.de

commit b45193cb4df556fe6251b285a5ce44046dd36b4a upstream.

In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access could occur during the memcpy() operation if the size of skb->cb is larger than the size of struct j1939_sk_buff_cb. This is because the memcpy() operation uses the size of skb->cb, leading to a read beyond the struct j1939_sk_buff_cb.

Updated the memcpy() operation to use the size of struct j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the memcpy() operation only reads the memory within the bounds of struct j1939_sk_buff_cb, preventing out-of-bounds memory access.

Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb is greater than or equal to the size of struct j1939_sk_buff_cb. This ensures that the skb->cb buffer is large enough to hold the j1939_sk_buff_cb structure.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: Shuangpeng Bai sjb7183@psu.edu Tested-by: Shuangpeng Bai sjb7183@psu.edu Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de Link: https://groups.google.com/g/syzkaller/c/G_LL-C3plRs/m/-8xCi6dCAgAJ Link: https://lore.kernel.org/all/20230404073128.3173900-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org [mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/can/j1939/transport.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -600,7 +600,10 @@ sk_buff *j1939_tp_tx_dat_new(struct j193 /* reserve CAN header */ skb_reserve(skb, offsetof(struct can_frame, data));

- memcpy(skb->cb, re_skcb, sizeof(skb->cb)); + /* skb->cb must be large enough to hold a j1939_sk_buff_cb structure */ + BUILD_BUG_ON(sizeof(skb->cb) < sizeof(*re_skcb)); + + memcpy(skb->cb, re_skcb, sizeof(*re_skcb)); skcb = j1939_skb_to_cb(skb); if (swap_src_dst) j1939_skbcb_swap(skcb);

From: Pratyush Yadav ptyadav@amazon.de

If qdisc_create_dflt() fails, it returns NULL. With CONFIG_NET_SCHED enabled, the check qdisc != &noop_qdisc passes and qdisc will be passed to qdisc_hash_add(), which dereferences it.

This assignment was present in the upstream commit 5891cd5ec46c2 ("net_sched: add __rcu annotation to netdev->qdisc") but was missed in the backport 22d95b5449249 ("net_sched: add __rcu annotation to netdev->qdisc"), perhaps due to merge conflicts. dev->qdisc is &noop_qdisc by default and if qdisc_create_dflt() fails, this assignment will make sure qdisc == &noop_qdisc and no NULL dereference will take place.

This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

Fixes: 22d95b5449249 ("net_sched: add __rcu annotation to netdev->qdisc") Signed-off-by: Pratyush Yadav ptyadav@amazon.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/sched/sch_generic.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -1116,6 +1116,7 @@ static void attach_default_qdiscs(struct qdisc->ops->attach(qdisc); } } + qdisc = rtnl_dereference(dev->qdisc);

#ifdef CONFIG_NET_SCHED if (qdisc != &noop_qdisc)

From: Zheng Yejian zhengyejian1@huawei.com

commit 6455b6163d8c680366663cdb8c679514d55fc30c upstream.

When user reads file 'trace_pipe', kernel keeps printing following logs that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in rb_get_reader_page(). It just looks like there's an infinite loop in tracing_read_pipe(). This problem occurs several times on arm64 platform when testing v5.10 and below.

Call trace: rb_get_reader_page+0x248/0x1300 rb_buffer_peek+0x34/0x160 ring_buffer_peek+0xbc/0x224 peek_next_entry+0x98/0xbc __find_next_entry+0xc4/0x1c0 trace_find_next_entry_inc+0x30/0x94 tracing_read_pipe+0x198/0x304 vfs_read+0xb4/0x1e0 ksys_read+0x74/0x100 __arm64_sys_read+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180

Then I dump the vmcore and look into the problematic per_cpu ring_buffer, I found that tail_page/commit_page/reader_page are on the same page while reader_page->read is obviously abnormal: tail_page == commit_page == reader_page == { .write = 0x100d20, .read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!! .entries = 0x10004c, .real_end = 0x0, .page = { .time_stamp = 0x857257416af0, .commit = 0xd20, // This page hasn't been full filled. // .data[0...0xd20] seems normal. } }

The root cause is most likely the race that reader and writer are on the same page while reader saw an event that not fully committed by writer.

To fix this, add memory barriers to make sure the reader can see the content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix race between reset page and reading page") has added the read barrier in rb_get_reader_page(), here we just need to add the write barrier.

Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyej...

Cc: stable@vger.kernel.org Fixes: 77ae365eca89 ("ring-buffer: make lockless") Suggested-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Zheng Yejian zhengyejian1@huawei.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/trace/ring_buffer.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2532,6 +2532,10 @@ rb_set_commit_to_write(struct ring_buffe if (RB_WARN_ON(cpu_buffer, rb_is_reader_page(cpu_buffer->tail_page))) return; + /* + * No need for a memory barrier here, as the update + * of the tail_page did it for this page. + */ local_set(&cpu_buffer->commit_page->page->commit, rb_page_write(cpu_buffer->commit_page)); rb_inc_page(cpu_buffer, &cpu_buffer->commit_page); @@ -2545,6 +2549,8 @@ rb_set_commit_to_write(struct ring_buffe while (rb_commit_index(cpu_buffer) != rb_page_write(cpu_buffer->commit_page)) {

+ /* Make sure the readers see the content of what is committed. */ + smp_wmb(); local_set(&cpu_buffer->commit_page->page->commit, rb_page_write(cpu_buffer->commit_page)); RB_WARN_ON(cpu_buffer, @@ -3920,7 +3926,12 @@ rb_get_reader_page(struct ring_buffer_pe

/* * Make sure we see any padding after the write update - * (see rb_reset_tail()) + * (see rb_reset_tail()). + * + * In addition, a writer may be writing on the reader page + * if the page has not been fully filled, so the read barrier + * is also needed to make sure we see the content of what is + * committed by the writer (see rb_set_commit_to_write()). */ smp_rmb();

From: Johan Hovold johan+linaro@kernel.org

commit 6e6f75c9c98d2d246d90411ff2b6f0cd271f4cba upstream.

Avoid looking for an existing mapping twice when creating a new mapping using irq_create_fwspec_mapping() by factoring out the actual allocation which is shared with irq_create_mapping_affinity().

The new helper function will also be used to fix a shared-interrupt mapping race, hence the Fixes tag.

Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings") Cc: stable@vger.kernel.org # 4.8 Tested-by: Hsin-Yi Wang hsinyi@chromium.org Tested-by: Mark-PK Tsai mark-pk.tsai@mediatek.com Signed-off-by: Johan Hovold johan+linaro@kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org Signed-off-by: Mark-PK Tsai mark-pk.tsai@mediatek.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/irq/irqdomain.c | 62 ++++++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 28 deletions(-)

--- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -672,6 +672,34 @@ unsigned int irq_create_direct_mapping(s } EXPORT_SYMBOL_GPL(irq_create_direct_mapping);

+static unsigned int __irq_create_mapping_affinity(struct irq_domain *domain, + irq_hw_number_t hwirq, + const struct irq_affinity_desc *affinity) +{ + struct device_node *of_node = irq_domain_get_of_node(domain); + int virq; + + pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq); + + /* Allocate a virtual interrupt number */ + virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node), + affinity); + if (virq <= 0) { + pr_debug("-> virq allocation failed\n"); + return 0; + } + + if (irq_domain_associate(domain, virq, hwirq)) { + irq_free_desc(virq); + return 0; + } + + pr_debug("irq %lu on domain %s mapped to virtual irq %u\n", + hwirq, of_node_full_name(of_node), virq); + + return virq; +} + /** * irq_create_mapping_affinity() - Map a hardware interrupt into linux irq space * @domain: domain owning this hardware interrupt or NULL for default domain @@ -684,49 +712,27 @@ EXPORT_SYMBOL_GPL(irq_create_direct_mapp * on the number returned from that call. */ unsigned int irq_create_mapping_affinity(struct irq_domain *domain, - irq_hw_number_t hwirq, - const struct irq_affinity_desc *affinity) + irq_hw_number_t hwirq, + const struct irq_affinity_desc *affinity) { - struct device_node *of_node; int virq;

- pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq); - - /* Look for default domain if nececssary */ + /* Look for default domain if necessary */ if (domain == NULL) domain = irq_default_domain; if (domain == NULL) { WARN(1, "%s(, %lx) called with NULL domain\n", __func__, hwirq); return 0; } - pr_debug("-> using domain @%p\n", domain); - - of_node = irq_domain_get_of_node(domain);

/* Check if mapping already exists */ virq = irq_find_mapping(domain, hwirq); if (virq) { - pr_debug("-> existing mapping on virq %d\n", virq); + pr_debug("existing mapping on virq %d\n", virq); return virq; }

- /* Allocate a virtual interrupt number */ - virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node), - affinity); - if (virq <= 0) { - pr_debug("-> virq allocation failed\n"); - return 0; - } - - if (irq_domain_associate(domain, virq, hwirq)) { - irq_free_desc(virq); - return 0; - } - - pr_debug("irq %lu on domain %s mapped to virtual irq %u\n", - hwirq, of_node_full_name(of_node), virq); - - return virq; + return __irq_create_mapping_affinity(domain, hwirq, affinity); } EXPORT_SYMBOL_GPL(irq_create_mapping_affinity);

@@ -866,7 +872,7 @@ unsigned int irq_create_fwspec_mapping(s return 0; } else { /* Create mapping */ - virq = irq_create_mapping(domain, hwirq); + virq = __irq_create_mapping_affinity(domain, hwirq, NULL); if (!virq) return virq; }

From: Johan Hovold johan+linaro@kernel.org

[ Upstream commit 601363cc08da25747feb87c55573dd54de91d66a ]

Parallel probing of devices that share interrupts (e.g. when a driver uses asynchronous probing) can currently result in two mappings for the same hardware interrupt to be created due to missing serialisation.

Make sure to hold the irq_domain_mutex when creating mappings so that looking for an existing mapping before creating a new one is done atomically.

Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers") Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings") Link: https://lore.kernel.org/r/YuJXMHoT4ijUxnRb@hovoldconsulting.com Cc: stable@vger.kernel.org # 4.8 Cc: Dmitry Torokhov dtor@chromium.org Cc: Jon Hunter jonathanh@nvidia.com Tested-by: Hsin-Yi Wang hsinyi@chromium.org Tested-by: Mark-PK Tsai mark-pk.tsai@mediatek.com Signed-off-by: Johan Hovold johan+linaro@kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20230213104302.17307-7-johan+linaro@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/irq/irqdomain.c | 64 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 46 insertions(+), 18 deletions(-)

--- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -25,6 +25,9 @@ static DEFINE_MUTEX(irq_domain_mutex);

static struct irq_domain *irq_default_domain;

+static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base, + unsigned int nr_irqs, int node, void *arg, + bool realloc, const struct irq_affinity_desc *affinity); static void irq_domain_check_hierarchy(struct irq_domain *domain);

struct irqchip_fwid { @@ -672,9 +675,9 @@ unsigned int irq_create_direct_mapping(s } EXPORT_SYMBOL_GPL(irq_create_direct_mapping);

-static unsigned int __irq_create_mapping_affinity(struct irq_domain *domain, - irq_hw_number_t hwirq, - const struct irq_affinity_desc *affinity) +static unsigned int irq_create_mapping_affinity_locked(struct irq_domain *domain, + irq_hw_number_t hwirq, + const struct irq_affinity_desc *affinity) { struct device_node *of_node = irq_domain_get_of_node(domain); int virq; @@ -689,7 +692,7 @@ static unsigned int __irq_create_mapping return 0; }

- if (irq_domain_associate(domain, virq, hwirq)) { + if (irq_domain_associate_locked(domain, virq, hwirq)) { irq_free_desc(virq); return 0; } @@ -725,14 +728,20 @@ unsigned int irq_create_mapping_affinity return 0; }

+ mutex_lock(&irq_domain_mutex); + /* Check if mapping already exists */ virq = irq_find_mapping(domain, hwirq); if (virq) { pr_debug("existing mapping on virq %d\n", virq); - return virq; + goto out; }

- return __irq_create_mapping_affinity(domain, hwirq, affinity); + virq = irq_create_mapping_affinity_locked(domain, hwirq, affinity); +out: + mutex_unlock(&irq_domain_mutex); + + return virq; } EXPORT_SYMBOL_GPL(irq_create_mapping_affinity);

@@ -834,6 +843,8 @@ unsigned int irq_create_fwspec_mapping(s if (WARN_ON(type & ~IRQ_TYPE_SENSE_MASK)) type &= IRQ_TYPE_SENSE_MASK;

+ mutex_lock(&irq_domain_mutex); + /* * If we've already configured this interrupt, * don't do it again, or hell will break loose. @@ -846,7 +857,7 @@ unsigned int irq_create_fwspec_mapping(s * interrupt number. */ if (type == IRQ_TYPE_NONE || type == irq_get_trigger_type(virq)) - return virq; + goto out;

/* * If the trigger type has not been set yet, then set @@ -854,35 +865,45 @@ unsigned int irq_create_fwspec_mapping(s */ if (irq_get_trigger_type(virq) == IRQ_TYPE_NONE) { irq_data = irq_get_irq_data(virq); - if (!irq_data) - return 0; + if (!irq_data) { + virq = 0; + goto out; + }

irqd_set_trigger_type(irq_data, type); - return virq; + goto out; }

pr_warn("type mismatch, failed to map hwirq-%lu for %s!\n", hwirq, of_node_full_name(to_of_node(fwspec->fwnode))); - return 0; + virq = 0; + goto out; }

if (irq_domain_is_hierarchy(domain)) { - virq = irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, fwspec); - if (virq <= 0) - return 0; + virq = irq_domain_alloc_irqs_locked(domain, -1, 1, NUMA_NO_NODE, + fwspec, false, NULL); + if (virq <= 0) { + virq = 0; + goto out; + } } else { /* Create mapping */ - virq = __irq_create_mapping_affinity(domain, hwirq, NULL); + virq = irq_create_mapping_affinity_locked(domain, hwirq, NULL); if (!virq) - return virq; + goto out; }

irq_data = irq_get_irq_data(virq); - if (WARN_ON(!irq_data)) - return 0; + if (WARN_ON(!irq_data)) { + virq = 0; + goto out; + }

/* Store trigger type */ irqd_set_trigger_type(irq_data, type); +out: + mutex_unlock(&irq_domain_mutex);

return virq; } @@ -1788,6 +1809,13 @@ void irq_domain_set_info(struct irq_doma irq_set_handler_data(virq, handler_data); }

+static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base, + unsigned int nr_irqs, int node, void *arg, + bool realloc, const struct irq_affinity_desc *affinity) +{ + return -EINVAL; +} + static void irq_domain_check_hierarchy(struct irq_domain *domain) { }

From: Oswald Buddenhagen oswald.buddenhagen@gmx.de

commit b09c551c77c7e01dc6e4f3c8bf06b5ffa7b06db5 upstream.

Due to two copy/pastos, closing the MIC or EFX capture device would make a running ADC capture hang due to unsetting its interrupt handler. In principle, this would have also allowed dereferencing dangling pointers, but we're actually rather thorough at disabling and flushing the ints.

While it may sound like one, this actually wasn't a hypothetical bug: PortAudio will open a capture stream at startup (and close it right away) even if not asked to. If the first device is busy, it will just proceed with the next one ... thus killing a concurrent capture.

Signed-off-by: Oswald Buddenhagen oswald.buddenhagen@gmx.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/emu10k1/emupcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -1244,7 +1244,7 @@ static int snd_emu10k1_capture_mic_close { struct snd_emu10k1 *emu = snd_pcm_substream_chip(substream);

- emu->capture_interrupt = NULL; + emu->capture_mic_interrupt = NULL; emu->pcm_capture_mic_substream = NULL; return 0; } @@ -1352,7 +1352,7 @@ static int snd_emu10k1_capture_efx_close { struct snd_emu10k1 *emu = snd_pcm_substream_chip(substream);

- emu->capture_interrupt = NULL; + emu->capture_efx_interrupt = NULL; emu->pcm_capture_efx_substream = NULL; return 0; }

From: Oswald Buddenhagen oswald.buddenhagen@gmx.de

commit e98e7a82bca2b6dce3e03719cff800ec913f9af7 upstream.

snd_cs8427_iec958_active() would always delete SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an argument `active`.

Signed-off-by: Oswald Buddenhagen oswald.buddenhagen@gmx.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/i2c/cs8427.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/sound/i2c/cs8427.c +++ b/sound/i2c/cs8427.c @@ -553,10 +553,13 @@ int snd_cs8427_iec958_active(struct snd_ if (snd_BUG_ON(!cs8427)) return -ENXIO; chip = cs8427->private_data; - if (active) + if (active) { memcpy(chip->playback.pcm_status, chip->playback.def_status, 24); - chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + } else { + chip->playback.pcm_ctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE; + } snd_ctl_notify(cs8427->bus->card, SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, &chip->playback.pcm_ctl->id);

From: Oswald Buddenhagen oswald.buddenhagen@gmx.de

commit f342ac00da1064eb4f94b1f4bcacbdfea955797a upstream.

The BIOS botches this one completely - it says the 2nd S/PDIF output is used, while in fact it's the 1st one. This is tested on DP45SG, but I'm assuming it's valid for the other boards in the series as well.

Also add some comments regarding the pins. FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc., where one can download the documentation.

Signed-off-by: Oswald Buddenhagen oswald.buddenhagen@gmx.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_sigmatel.c | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1701,6 +1701,7 @@ static const struct snd_pci_quirk stac92 };

static const struct hda_pintbl ref92hd73xx_pin_configs[] = { + // Port A-H { 0x0a, 0x02214030 }, { 0x0b, 0x02a19040 }, { 0x0c, 0x01a19020 }, @@ -1709,9 +1710,12 @@ static const struct hda_pintbl ref92hd73 { 0x0f, 0x01014010 }, { 0x10, 0x01014020 }, { 0x11, 0x01014030 }, + // CD in { 0x12, 0x02319040 }, + // Digial Mic ins { 0x13, 0x90a000f0 }, { 0x14, 0x90a000f0 }, + // Digital outs { 0x22, 0x01452050 }, { 0x23, 0x01452050 }, {} @@ -1752,6 +1756,7 @@ static const struct hda_pintbl alienware };

static const struct hda_pintbl intel_dg45id_pin_configs[] = { + // Analog outputs { 0x0a, 0x02214230 }, { 0x0b, 0x02A19240 }, { 0x0c, 0x01013214 }, @@ -1759,6 +1764,9 @@ static const struct hda_pintbl intel_dg4 { 0x0e, 0x01A19250 }, { 0x0f, 0x01011212 }, { 0x10, 0x01016211 }, + // Digital output + { 0x22, 0x01451380 }, + { 0x23, 0x40f000f0 }, {} };

From: Min Li lm0963hack@gmail.com

commit c95930abd687fcd1aa040dc4fe90dff947916460 upstream.

There is a potential race condition in hidp_session_thread that may lead to use-after-free. For instance, the timer is active while hidp_del_timer is called in hidp_session_thread(). After hidp_session_put, then 'session' will be freed, causing kernel panic when hidp_idle_timeout is running.

The solution is to use del_timer_sync instead of del_timer.

Here is the call trace:

? hidp_session_probe+0x780/0x780 call_timer_fn+0x2d/0x1e0 __run_timers.part.0+0x569/0x940 hidp_session_probe+0x780/0x780 call_timer_fn+0x1e0/0x1e0 ktime_get+0x5c/0xf0 lapic_next_deadline+0x2c/0x40 clockevents_program_event+0x205/0x320 run_timer_softirq+0xa9/0x1b0 __do_softirq+0x1b9/0x641 __irq_exit_rcu+0xdc/0x190 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0xa1/0xc0

Cc: stable@vger.kernel.org Signed-off-by: Min Li lm0963hack@gmail.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -433,7 +433,7 @@ static void hidp_set_timer(struct hidp_s static void hidp_del_timer(struct hidp_session *session) { if (session->idle_to > 0) - del_timer(&session->timer); + del_timer_sync(&session->timer); }

static void hidp_process_report(struct hidp_session *session, int type,

From: Christoph Hellwig hch@lst.de

commit 68d99ab0e9221ef54506f827576c5a914680eeaf upstream.

The BTRFS_FS_CSUM_IMPL_FAST flag is currently set whenever a non-generic crc32c is detected, which is the incorrect check if the file system uses a different checksumming algorithm. Refactor the code to only check this if crc32c is actually used. Note that in an ideal world the information if an algorithm is hardware accelerated or not should be provided by the crypto API instead, but that's left for another day.

CC: stable@vger.kernel.org # 5.4.x: c8a5f8ca9a9c: btrfs: print checksum type and implementation at mount time CC: stable@vger.kernel.org # 5.4.x Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/disk-io.c | 14 ++++++++++++++ fs/btrfs/super.c | 2 -- 2 files changed, 14 insertions(+), 2 deletions(-)

--- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2239,6 +2239,20 @@ static int btrfs_init_csum_hash(struct b

fs_info->csum_shash = csum_shash;

+ /* + * Check if the checksum implementation is a fast accelerated one. + * As-is this is a bit of a hack and should be replaced once the csum + * implementations provide that information themselves. + */ + switch (csum_type) { + case BTRFS_CSUM_TYPE_CRC32: + if (!strstr(crypto_shash_driver_name(csum_shash), "generic")) + set_bit(BTRFS_FS_CSUM_IMPL_FAST, &fs_info->flags); + break; + default: + break; + } + btrfs_info(fs_info, "using %s (%s) checksum algorithm", btrfs_super_csum_name(csum_type), crypto_shash_driver_name(csum_shash)); --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1567,8 +1567,6 @@ static struct dentry *btrfs_mount_root(s } else { snprintf(s->s_id, sizeof(s->s_id), "%pg", bdev); btrfs_sb(s)->bdev_holder = fs_type; - if (!strstr(crc32c_impl(), "generic")) - set_bit(BTRFS_FS_CSUM_IMPL_FAST, &fs_info->flags); error = btrfs_fill_super(s, fs_devices, data); } if (!error)

From: Arseniy Krasnov avkrasnov@sberdevices.ru

commit 93942b70461574ca7fc3d91494ca89b16a4c64c7 upstream.

Valid mask is 0x3FFF, without this patch the following problems were found:

1) [ 0.938914] Could not find a valid ONFI parameter page, trying bit-wise majority to recover it [ 0.947384] ONFI parameter recovery failed, aborting

2) Read with disabled ECC mode was broken.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Cc: Stable@vger.kernel.org Signed-off-by: Arseniy Krasnov AVKrasnov@sberdevices.ru Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/3794ffbf-dfea-e96f-1f97-fe235b005e19@sberd... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mtd/nand/raw/meson_nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -276,7 +276,7 @@ static void meson_nfc_cmd_access(struct

if (raw) { len = mtd->writesize + mtd->oobsize; - cmd = (len & GENMASK(5, 0)) | scrambler | DMA_DIR(dir); + cmd = (len & GENMASK(13, 0)) | scrambler | DMA_DIR(dir); writel(cmd, nfc->reg_base + NFC_REG_CMD); return; } @@ -540,7 +540,7 @@ static int meson_nfc_read_buf(struct nan if (ret) goto out;

- cmd = NFC_CMD_N2M | (len & GENMASK(5, 0)); + cmd = NFC_CMD_N2M | (len & GENMASK(13, 0)); writel(cmd, nfc->reg_base + NFC_REG_CMD);

meson_nfc_drain_cmd(nfc); @@ -564,7 +564,7 @@ static int meson_nfc_write_buf(struct na if (ret) return ret;

- cmd = NFC_CMD_M2N | (len & GENMASK(5, 0)); + cmd = NFC_CMD_M2N | (len & GENMASK(13, 0)); writel(cmd, nfc->reg_base + NFC_REG_CMD);

meson_nfc_drain_cmd(nfc);

From: Zheng Wang zyytlz.wz@163.com

[ Upstream commit ea4f1009408efb4989a0f139b70fb338e7f687d0 ]

In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring to init priv->rings and bound &ring->work with p9_xen_response.

When it calls xen_9pfs_front_event_handler to handle IRQ requests, it will finally call schedule_work to start the work.

When we call xen_9pfs_front_remove to remove the driver, there may be a sequence as follows:

Fix it by finishing the work before cleanup in xen_9pfs_front_free.

Note that, this bug is found by static analysis, which might be false positive.

CPU0 CPU1

|p9_xen_response xen_9pfs_front_remove| xen_9pfs_front_free| kfree(priv) | //free priv | |p9_tag_lookup |//use priv->client

Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend") Signed-off-by: Zheng Wang zyytlz.wz@163.com Reviewed-by: Michal Swiatkowski michal.swiatkowski@linux.intel.com Signed-off-by: Eric Van Hensbergen ericvh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/9p/trans_xen.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 67e9a7085e13b..4a16c5dd1576d 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -299,6 +299,10 @@ static void xen_9pfs_front_free(struct xen_9pfs_front_priv *priv) write_unlock(&xen_9pfs_lock);

for (i = 0; i < priv->num_rings; i++) { + struct xen_9pfs_dataring *ring = &priv->rings[i]; + + cancel_work_sync(&ring->work); + if (!priv->rings[i].intf) break; if (priv->rings[i].irq > 0)

From: Denis Plotnikov den-plotnikov@yandex-team.ru

[ Upstream commit 7573099e10ca69c3be33995c1fcd0d241226816d ]

Static code analyzer complains to unchecked return value. The result of pci_reset_function() is unchecked. Despite, the issue is on the FLR supported code path and in that case reset can be done with pcie_flr(), the patch uses less invasive approach by adding the result check of pci_reset_function().

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov den-plotnikov@yandex-team.ru Reviewed-by: Simon Horman simon.horman@corigine.com Reviewed-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index af38d3d73291c..4814046cfc78e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -629,7 +629,13 @@ int qlcnic_fw_create_ctx(struct qlcnic_adapter *dev) int i, err, ring;

if (dev->flags & QLCNIC_NEED_FLR) { - pci_reset_function(dev->pdev); + err = pci_reset_function(dev->pdev); + if (err) { + dev_err(&dev->pdev->dev, + "Adapter reset failed (%d). Please reboot\n", + err); + return err; + } dev->flags &= ~QLCNIC_NEED_FLR; }

From: Saravanan Vajravel saravanan.vajravel@broadcom.com

[ Upstream commit aca3b0fa3d04b40c96934d86cc224cccfa7ea8e0 ]

If AH create request fails, release sgid_attr to avoid GID entry referrence leak reported while releasing GID table

Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp") Link: https://lore.kernel.org/r/20230401063424.342204-1-saravanan.vajravel@broadco... Reviewed-by: Selvin Xavier selvin.xavier@broadcom.com Signed-off-by: Saravanan Vajravel saravanan.vajravel@broadcom.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/verbs.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 93a7ff1bd02c7..f61933dacbfd8 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -521,6 +521,8 @@ static struct ib_ah *_rdma_create_ah(struct ib_pd *pd,

ret = device->ops.create_ah(ah, ah_attr, flags, udata); if (ret) { + if (ah->sgid_attr) + rdma_put_gid_attr(ah->sgid_attr); kfree(ah); return ERR_PTR(ret); }

From: Roman Gushchin roman.gushchin@linux.dev

[ Upstream commit e8b74453555872851bdd7ea43a7c0ec39659834f ]

For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options.

Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:

[ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]---

[ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001 [ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007 [ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000 [ 237.168932] Call trace: [ 237.171373] add_dma_entry+0x214/0x240 [ 237.175115] debug_dma_map_page+0xf8/0x120 [ 237.179203] gem_rx_refill+0x190/0x280 [ 237.182942] gem_rx+0x224/0x2f0 [ 237.186075] macb_poll+0x58/0x100 [ 237.189384] net_rx_action+0x118/0x400 [ 237.193125] __do_softirq+0x138/0x36c [ 237.196780] irq_exit+0x98/0xc0 [ 237.199914] __handle_domain_irq+0x64/0xc0 [ 237.204000] gic_handle_irq+0x5c/0xc0 [ 237.207654] el1_irq+0xb8/0x140 [ 237.210789] arch_cpu_idle+0x40/0x200 [ 237.214444] default_idle_call+0x18/0x30 [ 237.218359] do_idle+0x200/0x280 [ 237.221578] cpu_startup_entry+0x20/0x30 [ 237.225493] rest_init+0xe4/0xf0 [ 237.228713] arch_call_rest_init+0xc/0x14 [ 237.232714] start_kernel+0x47c/0x4a8 [ 237.236367] ---[ end trace 7240980785f81d70 ]---

Lars was fast to find an explanation: according to the datasheet bit 2 of the rx buffer descriptor entry has a different meaning in the extended mode: Address [2] of beginning of buffer, or in extended buffer descriptor mode (DMA configuration register [28] = 1), indicates a valid timestamp in the buffer descriptor entry.

The macb driver didn't mask this bit while getting an address and it eventually caused a memory corruption and a dma failure.

The problem is resolved by explicitly clearing the problematic bit if hw timestamping is used.

Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by: Roman Gushchin roman.gushchin@linux.dev Co-developed-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Lars-Peter Clausen lars@metafoo.de Acked-by: Nicolas Ferre nicolas.ferre@microchip.com Reviewed-by: Jacob Keller jacob.e.keller@intel.com Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cadence/macb_main.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index d948b582f4c97..12dd18cbdba34 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -719,6 +719,10 @@ static dma_addr_t macb_get_addr(struct macb *bp, struct macb_dma_desc *desc) } #endif addr |= MACB_BF(RX_WADDR, MACB_BFEXT(RX_WADDR, desc->addr)); +#ifdef CONFIG_MACB_USE_HWSTAMP + if (bp->hw_dma_cap & HW_DMA_CAP_PTP) + addr &= ~GEM_BIT(DMA_RXVALID); +#endif return addr; }

From: Alexander Stein alexander.stein@ew.tq-group.com

[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ]

When start sending a new message clear the Rx & Tx buffer pointers in order to avoid using stale pointers.

Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com Tested-by: Emanuele Ghidoli emanuele.ghidoli@toradex.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-imx-lpi2c.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 13c17afe7102e..4fac2591b6618 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -468,6 +468,8 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter, if (num == 1 && msgs[0].len == 0) goto stop;

+ lpi2c_imx->rx_buf = NULL; + lpi2c_imx->tx_buf = NULL; lpi2c_imx->delivered = 0; lpi2c_imx->msglen = msgs[i].len; init_completion(&lpi2c_imx->complete);

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 03aecb1acbcd7a660f97d645ca6c09d9de27ff9d ]

Like the Windows Lenovo Yoga Book X91F/L the Android Lenovo Yoga Book X90F/L has a portrait 1200x1920 screen used in landscape mode, add a quirk for this.

When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models.

Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Javier Martinez Canillas javierm@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/20230301095218.28457-1-hdegoed... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index 8768073794fbf..6106fa7c43028 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -284,10 +284,17 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "IdeaPad Duet 3 10IGL5"), }, .driver_data = (void *)&lcd1200x1920_rightside_up, - }, { /* Lenovo Yoga Book X90F / X91F / X91L */ + }, { /* Lenovo Yoga Book X90F / X90L */ .matches = { - /* Non exact match to match all versions */ - DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"), + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), + }, + .driver_data = (void *)&lcd1200x1920_rightside_up, + }, { /* Lenovo Yoga Book X91F / X91L */ + .matches = { + /* Non exact match to match F + L versions */ + DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"), }, .driver_data = (void *)&lcd1200x1920_rightside_up, }, { /* OneGX1 Pro */

From: Robbie Harwood rharwood@redhat.com

[ Upstream commit 3584c1dbfffdabf8e3dc1dd25748bb38dd01cd43 ]

These particular errors can be encountered while trying to kexec when secureboot lockdown is in place. Without this change, even with a signed debug build, one still needs to reboot the machine to add the appropriate dyndbg parameters (since lockdown blocks debugfs).

Accordingly, upgrade all pr_debug() before fatal error into pr_warn().

Signed-off-by: Robbie Harwood rharwood@redhat.com Signed-off-by: David Howells dhowells@redhat.com cc: Jarkko Sakkinen jarkko@kernel.org cc: Eric Biederman ebiederm@xmission.com cc: Herbert Xu herbert@gondor.apana.org.au cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2 Signed-off-by: Sasha Levin sashal@kernel.org --- crypto/asymmetric_keys/pkcs7_verify.c | 10 +++++----- crypto/asymmetric_keys/verify_pefile.c | 24 ++++++++++++------------ 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/crypto/asymmetric_keys/pkcs7_verify.c b/crypto/asymmetric_keys/pkcs7_verify.c index ce49820caa97f..01e54450c846f 100644 --- a/crypto/asymmetric_keys/pkcs7_verify.c +++ b/crypto/asymmetric_keys/pkcs7_verify.c @@ -79,16 +79,16 @@ static int pkcs7_digest(struct pkcs7_message *pkcs7, }

if (sinfo->msgdigest_len != sig->digest_size) { - pr_debug("Sig %u: Invalid digest size (%u)\n", - sinfo->index, sinfo->msgdigest_len); + pr_warn("Sig %u: Invalid digest size (%u)\n", + sinfo->index, sinfo->msgdigest_len); ret = -EBADMSG; goto error; }

if (memcmp(sig->digest, sinfo->msgdigest, sinfo->msgdigest_len) != 0) { - pr_debug("Sig %u: Message digest doesn't match\n", - sinfo->index); + pr_warn("Sig %u: Message digest doesn't match\n", + sinfo->index); ret = -EKEYREJECTED; goto error; } @@ -488,7 +488,7 @@ int pkcs7_supply_detached_data(struct pkcs7_message *pkcs7, const void *data, size_t datalen) { if (pkcs7->data) { - pr_debug("Data already supplied\n"); + pr_warn("Data already supplied\n"); return -EINVAL; } pkcs7->data = data; diff --git a/crypto/asymmetric_keys/verify_pefile.c b/crypto/asymmetric_keys/verify_pefile.c index c43b077ba37db..0701bb161b63f 100644 --- a/crypto/asymmetric_keys/verify_pefile.c +++ b/crypto/asymmetric_keys/verify_pefile.c @@ -74,7 +74,7 @@ static int pefile_parse_binary(const void *pebuf, unsigned int pelen, break;

default: - pr_debug("Unknown PEOPT magic = %04hx\n", pe32->magic); + pr_warn("Unknown PEOPT magic = %04hx\n", pe32->magic); return -ELIBBAD; }

@@ -95,7 +95,7 @@ static int pefile_parse_binary(const void *pebuf, unsigned int pelen, ctx->certs_size = ddir->certs.size;

if (!ddir->certs.virtual_address || !ddir->certs.size) { - pr_debug("Unsigned PE binary\n"); + pr_warn("Unsigned PE binary\n"); return -ENODATA; }

@@ -127,7 +127,7 @@ static int pefile_strip_sig_wrapper(const void *pebuf, unsigned len;

if (ctx->sig_len < sizeof(wrapper)) { - pr_debug("Signature wrapper too short\n"); + pr_warn("Signature wrapper too short\n"); return -ELIBBAD; }

@@ -142,16 +142,16 @@ static int pefile_strip_sig_wrapper(const void *pebuf, * rounded up since 0.110. */ if (wrapper.length > ctx->sig_len) { - pr_debug("Signature wrapper bigger than sig len (%x > %x)\n", - ctx->sig_len, wrapper.length); + pr_warn("Signature wrapper bigger than sig len (%x > %x)\n", + ctx->sig_len, wrapper.length); return -ELIBBAD; } if (wrapper.revision != WIN_CERT_REVISION_2_0) { - pr_debug("Signature is not revision 2.0\n"); + pr_warn("Signature is not revision 2.0\n"); return -ENOTSUPP; } if (wrapper.cert_type != WIN_CERT_TYPE_PKCS_SIGNED_DATA) { - pr_debug("Signature certificate type is not PKCS\n"); + pr_warn("Signature certificate type is not PKCS\n"); return -ENOTSUPP; }

@@ -164,7 +164,7 @@ static int pefile_strip_sig_wrapper(const void *pebuf, ctx->sig_offset += sizeof(wrapper); ctx->sig_len -= sizeof(wrapper); if (ctx->sig_len < 4) { - pr_debug("Signature data missing\n"); + pr_warn("Signature data missing\n"); return -EKEYREJECTED; }

@@ -198,7 +198,7 @@ static int pefile_strip_sig_wrapper(const void *pebuf, return 0; } not_pkcs7: - pr_debug("Signature data not PKCS#7\n"); + pr_warn("Signature data not PKCS#7\n"); return -ELIBBAD; }

@@ -341,8 +341,8 @@ static int pefile_digest_pe(const void *pebuf, unsigned int pelen, digest_size = crypto_shash_digestsize(tfm);

if (digest_size != ctx->digest_len) { - pr_debug("Digest size mismatch (%zx != %x)\n", - digest_size, ctx->digest_len); + pr_warn("Digest size mismatch (%zx != %x)\n", + digest_size, ctx->digest_len); ret = -EBADMSG; goto error_no_desc; } @@ -373,7 +373,7 @@ static int pefile_digest_pe(const void *pebuf, unsigned int pelen, * PKCS#7 certificate. */ if (memcmp(digest, ctx->digest, ctx->digest_len) != 0) { - pr_debug("Digest mismatch\n"); + pr_warn("Digest mismatch\n"); ret = -EKEYREJECTED; } else { pr_debug("The digests match!\n");

From: Lee Jones lee.jones@linaro.org

[ Upstream commit ab4e4de9fd8b469823a645f05f2c142e9270b012 ]

Fixes the following W=1 kernel build warning(s):

drivers/mtd/ubi/wl.c:584: warning: Function parameter or member 'nested' not described in 'schedule_erase' drivers/mtd/ubi/wl.c:1075: warning: Excess function parameter 'shutdown' description in '__erase_worker'

Cc: Richard Weinberger richard@nod.at Cc: Miquel Raynal miquel.raynal@bootlin.com Cc: Vignesh Raghavendra vigneshr@ti.com Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-13-lee.jones@linaro... Stable-dep-of: f773f0a331d6 ("ubi: Fix deadlock caused by recursively holding work_sem") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/ubi/wl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 4f88433d4adc7..28110cd4400b5 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -576,6 +576,7 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, * @vol_id: the volume ID that last used this PEB * @lnum: the last used logical eraseblock number for the PEB * @torture: if the physical eraseblock has to be tortured + * @nested: denotes whether the work_sem is already held in read mode * * This function returns zero in case of success and a %-ENOMEM in case of * failure. @@ -1060,8 +1061,6 @@ static int ensure_wear_leveling(struct ubi_device *ubi, int nested) * __erase_worker - physical eraseblock erase worker function. * @ubi: UBI device description object * @wl_wrk: the work object - * @shutdown: non-zero if the worker has to free memory and exit - * because the WL sub-system is shutting down * * This function erases a physical eraseblock and perform torture testing if * needed. It also takes care about marking the physical eraseblock bad if

From: Gregor Herburger gregor.herburger@tq-group.com

[ Upstream commit f8160d3b35fc94491bb0cb974dbda310ef96c0e2 ]

In polling mode, no stop condition is generated after a timeout. This causes SCL to remain low and thereby block the bus. If this happens during a transfer it can cause slaves to misinterpret the subsequent transfer and return wrong values.

To solve this, pass the ETIMEDOUT error up from ocores_process_polling() instead of setting STATE_ERROR directly. The caller is adjusted to call ocores_process_timeout() on error both in polling and in IRQ mode, which will set STATE_ERROR and generate a stop condition.

Fixes: 69c8c0c0efa8 ("i2c: ocores: add polling interface") Signed-off-by: Gregor Herburger gregor.herburger@tq-group.com Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Acked-by: Peter Korsgaard peter@korsgaard.com Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Federico Vaga federico.vaga@cern.ch Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-ocores.c | 35 ++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index ca8b3ecfa93d1..1c3595c8a761a 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -343,18 +343,18 @@ static int ocores_poll_wait(struct ocores_i2c *i2c) * ocores_isr(), we just add our polling code around it. * * It can run in atomic context + * + * Return: 0 on success, -ETIMEDOUT on timeout */ -static void ocores_process_polling(struct ocores_i2c *i2c) +static int ocores_process_polling(struct ocores_i2c *i2c) { - while (1) { - irqreturn_t ret; - int err; + irqreturn_t ret; + int err = 0;

+ while (1) { err = ocores_poll_wait(i2c); - if (err) { - i2c->state = STATE_ERROR; + if (err) break; /* timeout */ - }

ret = ocores_isr(-1, i2c); if (ret == IRQ_NONE) @@ -365,13 +365,15 @@ static void ocores_process_polling(struct ocores_i2c *i2c) break; } } + + return err; }

static int ocores_xfer_core(struct ocores_i2c *i2c, struct i2c_msg *msgs, int num, bool polling) { - int ret; + int ret = 0; u8 ctrl;

ctrl = oc_getreg(i2c, OCI2C_CONTROL); @@ -389,15 +391,16 @@ static int ocores_xfer_core(struct ocores_i2c *i2c, oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);

if (polling) { - ocores_process_polling(i2c); + ret = ocores_process_polling(i2c); } else { - ret = wait_event_timeout(i2c->wait, - (i2c->state == STATE_ERROR) || - (i2c->state == STATE_DONE), HZ); - if (ret == 0) { - ocores_process_timeout(i2c); - return -ETIMEDOUT; - } + if (wait_event_timeout(i2c->wait, + (i2c->state == STATE_ERROR) || + (i2c->state == STATE_DONE), HZ) == 0) + ret = -ETIMEDOUT; + } + if (ret) { + ocores_process_timeout(i2c); + return ret; }

return (i2c->state == STATE_DONE) ? num : -EIO;

From: Steve Clevenger scclevenger@os.amperecomputing.com

commit bf84937e882009075f57fd213836256fc65d96bc upstream.

In etm4_enable_hw, fix for() loop range to represent address comparator pairs.

Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver") Cc: stable@vger.kernel.org Signed-off-by: Steve Clevenger scclevenger@os.amperecomputing.com Reviewed-by: James Clark james.clark@arm.com Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Link: https://lore.kernel.org/r/4a4ee61ce8ef402615a4528b21a051de3444fb7b.167754007... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hwtracing/coresight/coresight-etm4x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -156,7 +156,7 @@ static int etm4_enable_hw(struct etmv4_d writel_relaxed(config->ss_pe_cmp[i], drvdata->base + TRCSSPCICRn(i)); } - for (i = 0; i < drvdata->nr_addr_cmp; i++) { + for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) { writeq_relaxed(config->addr_val[i], drvdata->base + TRCACVRn(i)); writeq_relaxed(config->addr_acc[i],

From: Christoph Hellwig hch@lst.de

commit de7a866fd41b227b0aa6e9cbeb0dae221c12f542 upstream.

There is no point in splitting the fields like this in an purely in-memory structure.

Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/libxfs/xfs_inode_buf.c | 11 +++++------ fs/xfs/libxfs/xfs_inode_buf.h | 3 +-- fs/xfs/xfs_dquot.c | 2 +- fs/xfs/xfs_icache.c | 4 ++-- fs/xfs/xfs_inode.c | 6 +++--- fs/xfs/xfs_inode.h | 21 +-------------------- fs/xfs/xfs_inode_item.c | 4 ++-- fs/xfs/xfs_ioctl.c | 8 ++++---- fs/xfs/xfs_iops.c | 2 +- fs/xfs/xfs_itable.c | 2 +- fs/xfs/xfs_qm.c | 8 ++++---- fs/xfs/xfs_qm_bhv.c | 2 +- 12 files changed, 26 insertions(+), 47 deletions(-)

--- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -213,13 +213,12 @@ xfs_inode_from_disk( to->di_version = from->di_version; if (to->di_version == 1) { set_nlink(inode, be16_to_cpu(from->di_onlink)); - to->di_projid_lo = 0; - to->di_projid_hi = 0; + to->di_projid = 0; to->di_version = 2; } else { set_nlink(inode, be32_to_cpu(from->di_nlink)); - to->di_projid_lo = be16_to_cpu(from->di_projid_lo); - to->di_projid_hi = be16_to_cpu(from->di_projid_hi); + to->di_projid = (prid_t)be16_to_cpu(from->di_projid_hi) << 16 | + be16_to_cpu(from->di_projid_lo); }

to->di_format = from->di_format; @@ -279,8 +278,8 @@ xfs_inode_to_disk( to->di_format = from->di_format; to->di_uid = cpu_to_be32(from->di_uid); to->di_gid = cpu_to_be32(from->di_gid); - to->di_projid_lo = cpu_to_be16(from->di_projid_lo); - to->di_projid_hi = cpu_to_be16(from->di_projid_hi); + to->di_projid_lo = cpu_to_be16(from->di_projid & 0xffff); + to->di_projid_hi = cpu_to_be16(from->di_projid >> 16);

memset(to->di_pad, 0, sizeof(to->di_pad)); to->di_atime.t_sec = cpu_to_be32(inode->i_atime.tv_sec); --- a/fs/xfs/libxfs/xfs_inode_buf.h +++ b/fs/xfs/libxfs/xfs_inode_buf.h @@ -21,8 +21,7 @@ struct xfs_icdinode { uint16_t di_flushiter; /* incremented on flush */ uint32_t di_uid; /* owner's user id */ uint32_t di_gid; /* owner's group id */ - uint16_t di_projid_lo; /* lower part of owner's project id */ - uint16_t di_projid_hi; /* higher part of owner's project id */ + uint32_t di_projid; /* owner's project id */ xfs_fsize_t di_size; /* number of bytes in file */ xfs_rfsblock_t di_nblocks; /* # of direct & btree blocks used */ xfs_extlen_t di_extsize; /* basic/minimum extent size for file */ --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -863,7 +863,7 @@ xfs_qm_id_for_quotatype( case XFS_DQ_GROUP: return ip->i_d.di_gid; case XFS_DQ_PROJ: - return xfs_get_projid(ip); + return ip->i_d.di_projid; } ASSERT(0); return 0; --- a/fs/xfs/xfs_icache.c +++ b/fs/xfs/xfs_icache.c @@ -1430,7 +1430,7 @@ xfs_inode_match_id( return 0;

if ((eofb->eof_flags & XFS_EOF_FLAGS_PRID) && - xfs_get_projid(ip) != eofb->eof_prid) + ip->i_d.di_projid != eofb->eof_prid) return 0;

return 1; @@ -1454,7 +1454,7 @@ xfs_inode_match_id_union( return 1;

if ((eofb->eof_flags & XFS_EOF_FLAGS_PRID) && - xfs_get_projid(ip) == eofb->eof_prid) + ip->i_d.di_projid == eofb->eof_prid) return 1;

return 0; --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -809,7 +809,7 @@ xfs_ialloc( ip->i_d.di_uid = xfs_kuid_to_uid(current_fsuid()); ip->i_d.di_gid = xfs_kgid_to_gid(current_fsgid()); inode->i_rdev = rdev; - xfs_set_projid(ip, prid); + ip->i_d.di_projid = prid;

if (pip && XFS_INHERIT_GID(pip)) { ip->i_d.di_gid = pip->i_d.di_gid; @@ -1418,7 +1418,7 @@ xfs_link( * the tree quota mechanism could be circumvented. */ if (unlikely((tdp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) && - (xfs_get_projid(tdp) != xfs_get_projid(sip)))) { + tdp->i_d.di_projid != sip->i_d.di_projid)) { error = -EXDEV; goto error_return; } @@ -3299,7 +3299,7 @@ xfs_rename( * tree quota mechanism would be circumvented. */ if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) && - (xfs_get_projid(target_dp) != xfs_get_projid(src_ip)))) { + target_dp->i_d.di_projid != src_ip->i_d.di_projid)) { error = -EXDEV; goto out_trans_cancel; } --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -177,30 +177,11 @@ xfs_iflags_test_and_set(xfs_inode_t *ip, return ret; }

-/* - * Project quota id helpers (previously projid was 16bit only - * and using two 16bit values to hold new 32bit projid was chosen - * to retain compatibility with "old" filesystems). - */ -static inline prid_t -xfs_get_projid(struct xfs_inode *ip) -{ - return (prid_t)ip->i_d.di_projid_hi << 16 | ip->i_d.di_projid_lo; -} - -static inline void -xfs_set_projid(struct xfs_inode *ip, - prid_t projid) -{ - ip->i_d.di_projid_hi = (uint16_t) (projid >> 16); - ip->i_d.di_projid_lo = (uint16_t) (projid & 0xffff); -} - static inline prid_t xfs_get_initial_prid(struct xfs_inode *dp) { if (dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) - return xfs_get_projid(dp); + return dp->i_d.di_projid;

return XFS_PROJID_DEFAULT; } --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -310,8 +310,8 @@ xfs_inode_to_log_dinode( to->di_format = from->di_format; to->di_uid = from->di_uid; to->di_gid = from->di_gid; - to->di_projid_lo = from->di_projid_lo; - to->di_projid_hi = from->di_projid_hi; + to->di_projid_lo = from->di_projid & 0xffff; + to->di_projid_hi = from->di_projid >> 16;

memset(to->di_pad, 0, sizeof(to->di_pad)); memset(to->di_pad3, 0, sizeof(to->di_pad3)); --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1144,7 +1144,7 @@ xfs_fill_fsxattr( fa->fsx_extsize = ip->i_d.di_extsize << ip->i_mount->m_sb.sb_blocklog; fa->fsx_cowextsize = ip->i_d.di_cowextsize << ip->i_mount->m_sb.sb_blocklog; - fa->fsx_projid = xfs_get_projid(ip); + fa->fsx_projid = ip->i_d.di_projid;

if (attr) { if (ip->i_afp) { @@ -1597,7 +1597,7 @@ xfs_ioctl_setattr( }

if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_PQUOTA_ON(mp) && - xfs_get_projid(ip) != fa->fsx_projid) { + ip->i_d.di_projid != fa->fsx_projid) { code = xfs_qm_vop_chown_reserve(tp, ip, udqp, NULL, pdqp, capable(CAP_FOWNER) ? XFS_QMOPT_FORCE_RES : 0); if (code) /* out of quota */ @@ -1634,13 +1634,13 @@ xfs_ioctl_setattr( VFS_I(ip)->i_mode &= ~(S_ISUID|S_ISGID);

/* Change the ownerships and register project quota modifications */ - if (xfs_get_projid(ip) != fa->fsx_projid) { + if (ip->i_d.di_projid != fa->fsx_projid) { if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_PQUOTA_ON(mp)) { olddquot = xfs_qm_vop_chown(tp, ip, &ip->i_pdquot, pdqp); } ASSERT(ip->i_d.di_version > 1); - xfs_set_projid(ip, fa->fsx_projid); + ip->i_d.di_projid = fa->fsx_projid; }

/* --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -668,7 +668,7 @@ xfs_setattr_nonsize( ASSERT(gdqp == NULL); error = xfs_qm_vop_dqalloc(ip, xfs_kuid_to_uid(uid), xfs_kgid_to_gid(gid), - xfs_get_projid(ip), + ip->i_d.di_projid, qflags, &udqp, &gdqp, NULL); if (error) return error; --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -84,7 +84,7 @@ xfs_bulkstat_one_int( /* xfs_iget returns the following without needing * further change. */ - buf->bs_projectid = xfs_get_projid(ip); + buf->bs_projectid = ip->i_d.di_projid; buf->bs_ino = ino; buf->bs_uid = dic->di_uid; buf->bs_gid = dic->di_gid; --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -347,7 +347,7 @@ xfs_qm_dqattach_locked( }

if (XFS_IS_PQUOTA_ON(mp) && !ip->i_pdquot) { - error = xfs_qm_dqattach_one(ip, xfs_get_projid(ip), XFS_DQ_PROJ, + error = xfs_qm_dqattach_one(ip, ip->i_d.di_projid, XFS_DQ_PROJ, doalloc, &ip->i_pdquot); if (error) goto done; @@ -1715,7 +1715,7 @@ xfs_qm_vop_dqalloc( } } if ((flags & XFS_QMOPT_PQUOTA) && XFS_IS_PQUOTA_ON(mp)) { - if (xfs_get_projid(ip) != prid) { + if (ip->i_d.di_projid != prid) { xfs_iunlock(ip, lockflags); error = xfs_qm_dqget(mp, (xfs_dqid_t)prid, XFS_DQ_PROJ, true, &pq); @@ -1849,7 +1849,7 @@ xfs_qm_vop_chown_reserve( }

if (XFS_IS_PQUOTA_ON(ip->i_mount) && pdqp && - xfs_get_projid(ip) != be32_to_cpu(pdqp->q_core.d_id)) { + ip->i_d.di_projid != be32_to_cpu(pdqp->q_core.d_id)) { prjflags = XFS_QMOPT_ENOSPC; pdq_delblks = pdqp; if (delblks) { @@ -1950,7 +1950,7 @@ xfs_qm_vop_create_dqattach( } if (pdqp && XFS_IS_PQUOTA_ON(mp)) { ASSERT(ip->i_pdquot == NULL); - ASSERT(xfs_get_projid(ip) == be32_to_cpu(pdqp->q_core.d_id)); + ASSERT(ip->i_d.di_projid == be32_to_cpu(pdqp->q_core.d_id));

ip->i_pdquot = xfs_qm_dqhold(pdqp); xfs_trans_mod_dquot(tp, pdqp, XFS_TRANS_DQ_ICOUNT, 1); --- a/fs/xfs/xfs_qm_bhv.c +++ b/fs/xfs/xfs_qm_bhv.c @@ -60,7 +60,7 @@ xfs_qm_statvfs( struct xfs_mount *mp = ip->i_mount; struct xfs_dquot *dqp;

- if (!xfs_qm_dqget(mp, xfs_get_projid(ip), XFS_DQ_PROJ, false, &dqp)) { + if (!xfs_qm_dqget(mp, ip->i_d.di_projid, XFS_DQ_PROJ, false, &dqp)) { xfs_fill_statvfs_from_dquot(statp, dqp); xfs_qm_dqput(dqp); }

From: Christoph Hellwig hch@lst.de

commit 542951592c99ff7b15c050954c051dd6dd6c0f97 upstream.

Use the Linux inode i_uid/i_gid members everywhere and just convert from/to the scalar value when reading or writing the on-disk inode.

Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/libxfs/xfs_inode_buf.c | 10 ++++------ fs/xfs/libxfs/xfs_inode_buf.h | 2 -- fs/xfs/xfs_dquot.c | 4 ++-- fs/xfs/xfs_inode.c | 14 ++++---------- fs/xfs/xfs_inode_item.c | 4 ++-- fs/xfs/xfs_ioctl.c | 6 +++--- fs/xfs/xfs_iops.c | 6 +----- fs/xfs/xfs_itable.c | 4 ++-- fs/xfs/xfs_qm.c | 40 +++++++++++++++++++++++++--------------- fs/xfs/xfs_quota.h | 4 ++-- fs/xfs/xfs_symlink.c | 4 +--- 11 files changed, 46 insertions(+), 52 deletions(-)

--- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -222,10 +222,8 @@ xfs_inode_from_disk( }

to->di_format = from->di_format; - to->di_uid = be32_to_cpu(from->di_uid); - inode->i_uid = xfs_uid_to_kuid(to->di_uid); - to->di_gid = be32_to_cpu(from->di_gid); - inode->i_gid = xfs_gid_to_kgid(to->di_gid); + inode->i_uid = xfs_uid_to_kuid(be32_to_cpu(from->di_uid)); + inode->i_gid = xfs_gid_to_kgid(be32_to_cpu(from->di_gid)); to->di_flushiter = be16_to_cpu(from->di_flushiter);

/* @@ -278,8 +276,8 @@ xfs_inode_to_disk(

to->di_version = from->di_version; to->di_format = from->di_format; - to->di_uid = cpu_to_be32(from->di_uid); - to->di_gid = cpu_to_be32(from->di_gid); + to->di_uid = cpu_to_be32(xfs_kuid_to_uid(inode->i_uid)); + to->di_gid = cpu_to_be32(xfs_kgid_to_gid(inode->i_gid)); to->di_projid_lo = cpu_to_be16(from->di_projid & 0xffff); to->di_projid_hi = cpu_to_be16(from->di_projid >> 16);

--- a/fs/xfs/libxfs/xfs_inode_buf.h +++ b/fs/xfs/libxfs/xfs_inode_buf.h @@ -19,8 +19,6 @@ struct xfs_icdinode { int8_t di_version; /* inode version */ int8_t di_format; /* format of di_c data */ uint16_t di_flushiter; /* incremented on flush */ - uint32_t di_uid; /* owner's user id */ - uint32_t di_gid; /* owner's group id */ uint32_t di_projid; /* owner's project id */ xfs_fsize_t di_size; /* number of bytes in file */ xfs_rfsblock_t di_nblocks; /* # of direct & btree blocks used */ --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -859,9 +859,9 @@ xfs_qm_id_for_quotatype( { switch (type) { case XFS_DQ_USER: - return ip->i_d.di_uid; + return xfs_kuid_to_uid(VFS_I(ip)->i_uid); case XFS_DQ_GROUP: - return ip->i_d.di_gid; + return xfs_kgid_to_gid(VFS_I(ip)->i_gid); case XFS_DQ_PROJ: return ip->i_d.di_projid; } --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -807,18 +807,15 @@ xfs_ialloc( inode->i_mode = mode; set_nlink(inode, nlink); inode->i_uid = current_fsuid(); - ip->i_d.di_uid = xfs_kuid_to_uid(inode->i_uid); inode->i_rdev = rdev; ip->i_d.di_projid = prid;

if (pip && XFS_INHERIT_GID(pip)) { inode->i_gid = VFS_I(pip)->i_gid; - ip->i_d.di_gid = pip->i_d.di_gid; if ((VFS_I(pip)->i_mode & S_ISGID) && S_ISDIR(mode)) inode->i_mode |= S_ISGID; } else { inode->i_gid = current_fsgid(); - ip->i_d.di_gid = xfs_kgid_to_gid(inode->i_gid); }

/* @@ -826,9 +823,8 @@ xfs_ialloc( * ID or one of the supplementary group IDs, the S_ISGID bit is cleared * (and only if the irix_sgid_inherit compatibility variable is set). */ - if ((irix_sgid_inherit) && - (inode->i_mode & S_ISGID) && - (!in_group_p(xfs_gid_to_kgid(ip->i_d.di_gid)))) + if (irix_sgid_inherit && + (inode->i_mode & S_ISGID) && !in_group_p(inode->i_gid)) inode->i_mode &= ~S_ISGID;

ip->i_d.di_size = 0; @@ -1157,8 +1153,7 @@ xfs_create( /* * Make sure that we have allocated dquot(s) on disk. */ - error = xfs_qm_vop_dqalloc(dp, xfs_kuid_to_uid(current_fsuid()), - xfs_kgid_to_gid(current_fsgid()), prid, + error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid, XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp, &pdqp); if (error) @@ -1308,8 +1303,7 @@ xfs_create_tmpfile( /* * Make sure that we have allocated dquot(s) on disk. */ - error = xfs_qm_vop_dqalloc(dp, xfs_kuid_to_uid(current_fsuid()), - xfs_kgid_to_gid(current_fsgid()), prid, + error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid, XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp, &pdqp); if (error) --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -308,8 +308,8 @@ xfs_inode_to_log_dinode(

to->di_version = from->di_version; to->di_format = from->di_format; - to->di_uid = from->di_uid; - to->di_gid = from->di_gid; + to->di_uid = xfs_kuid_to_uid(inode->i_uid); + to->di_gid = xfs_kgid_to_gid(inode->i_gid); to->di_projid_lo = from->di_projid & 0xffff; to->di_projid_hi = from->di_projid >> 16;

--- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1572,9 +1572,9 @@ xfs_ioctl_setattr( * because the i_*dquot fields will get updated anyway. */ if (XFS_IS_QUOTA_ON(mp)) { - code = xfs_qm_vop_dqalloc(ip, ip->i_d.di_uid, - ip->i_d.di_gid, fa->fsx_projid, - XFS_QMOPT_PQUOTA, &udqp, NULL, &pdqp); + code = xfs_qm_vop_dqalloc(ip, VFS_I(ip)->i_uid, + VFS_I(ip)->i_gid, fa->fsx_projid, + XFS_QMOPT_PQUOTA, &udqp, NULL, &pdqp); if (code) return code; } --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -666,9 +666,7 @@ xfs_setattr_nonsize( */ ASSERT(udqp == NULL); ASSERT(gdqp == NULL); - error = xfs_qm_vop_dqalloc(ip, xfs_kuid_to_uid(uid), - xfs_kgid_to_gid(gid), - ip->i_d.di_projid, + error = xfs_qm_vop_dqalloc(ip, uid, gid, ip->i_d.di_projid, qflags, &udqp, &gdqp, NULL); if (error) return error; @@ -737,7 +735,6 @@ xfs_setattr_nonsize( olddquot1 = xfs_qm_vop_chown(tp, ip, &ip->i_udquot, udqp); } - ip->i_d.di_uid = xfs_kuid_to_uid(uid); inode->i_uid = uid; } if (!gid_eq(igid, gid)) { @@ -749,7 +746,6 @@ xfs_setattr_nonsize( olddquot2 = xfs_qm_vop_chown(tp, ip, &ip->i_gdquot, gdqp); } - ip->i_d.di_gid = xfs_kgid_to_gid(gid); inode->i_gid = gid; } } --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -86,8 +86,8 @@ xfs_bulkstat_one_int( */ buf->bs_projectid = ip->i_d.di_projid; buf->bs_ino = ino; - buf->bs_uid = dic->di_uid; - buf->bs_gid = dic->di_gid; + buf->bs_uid = xfs_kuid_to_uid(inode->i_uid); + buf->bs_gid = xfs_kgid_to_gid(inode->i_gid); buf->bs_size = dic->di_size;

buf->bs_nlink = inode->i_nlink; --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -331,16 +331,18 @@ xfs_qm_dqattach_locked( ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));

if (XFS_IS_UQUOTA_ON(mp) && !ip->i_udquot) { - error = xfs_qm_dqattach_one(ip, ip->i_d.di_uid, XFS_DQ_USER, - doalloc, &ip->i_udquot); + error = xfs_qm_dqattach_one(ip, + xfs_kuid_to_uid(VFS_I(ip)->i_uid), + XFS_DQ_USER, doalloc, &ip->i_udquot); if (error) goto done; ASSERT(ip->i_udquot); }

if (XFS_IS_GQUOTA_ON(mp) && !ip->i_gdquot) { - error = xfs_qm_dqattach_one(ip, ip->i_d.di_gid, XFS_DQ_GROUP, - doalloc, &ip->i_gdquot); + error = xfs_qm_dqattach_one(ip, + xfs_kgid_to_gid(VFS_I(ip)->i_gid), + XFS_DQ_GROUP, doalloc, &ip->i_gdquot); if (error) goto done; ASSERT(ip->i_gdquot); @@ -1630,8 +1632,8 @@ xfs_qm_dqfree_one( int xfs_qm_vop_dqalloc( struct xfs_inode *ip, - xfs_dqid_t uid, - xfs_dqid_t gid, + kuid_t uid, + kgid_t gid, prid_t prid, uint flags, struct xfs_dquot **O_udqpp, @@ -1639,6 +1641,7 @@ xfs_qm_vop_dqalloc( struct xfs_dquot **O_pdqpp) { struct xfs_mount *mp = ip->i_mount; + struct inode *inode = VFS_I(ip); struct xfs_dquot *uq = NULL; struct xfs_dquot *gq = NULL; struct xfs_dquot *pq = NULL; @@ -1652,7 +1655,7 @@ xfs_qm_vop_dqalloc( xfs_ilock(ip, lockflags);

if ((flags & XFS_QMOPT_INHERIT) && XFS_INHERIT_GID(ip)) - gid = ip->i_d.di_gid; + gid = inode->i_gid;

/* * Attach the dquot(s) to this inode, doing a dquot allocation @@ -1667,7 +1670,7 @@ xfs_qm_vop_dqalloc( }

if ((flags & XFS_QMOPT_UQUOTA) && XFS_IS_UQUOTA_ON(mp)) { - if (ip->i_d.di_uid != uid) { + if (!uid_eq(inode->i_uid, uid)) { /* * What we need is the dquot that has this uid, and * if we send the inode to dqget, the uid of the inode @@ -1678,7 +1681,8 @@ xfs_qm_vop_dqalloc( * holding ilock. */ xfs_iunlock(ip, lockflags); - error = xfs_qm_dqget(mp, uid, XFS_DQ_USER, true, &uq); + error = xfs_qm_dqget(mp, xfs_kuid_to_uid(uid), + XFS_DQ_USER, true, &uq); if (error) { ASSERT(error != -ENOENT); return error; @@ -1699,9 +1703,10 @@ xfs_qm_vop_dqalloc( } } if ((flags & XFS_QMOPT_GQUOTA) && XFS_IS_GQUOTA_ON(mp)) { - if (ip->i_d.di_gid != gid) { + if (!gid_eq(inode->i_gid, gid)) { xfs_iunlock(ip, lockflags); - error = xfs_qm_dqget(mp, gid, XFS_DQ_GROUP, true, &gq); + error = xfs_qm_dqget(mp, xfs_kgid_to_gid(gid), + XFS_DQ_GROUP, true, &gq); if (error) { ASSERT(error != -ENOENT); goto error_rele; @@ -1827,7 +1832,8 @@ xfs_qm_vop_chown_reserve( XFS_QMOPT_RES_RTBLKS : XFS_QMOPT_RES_REGBLKS;

if (XFS_IS_UQUOTA_ON(mp) && udqp && - ip->i_d.di_uid != be32_to_cpu(udqp->q_core.d_id)) { + xfs_kuid_to_uid(VFS_I(ip)->i_uid) != + be32_to_cpu(udqp->q_core.d_id)) { udq_delblks = udqp; /* * If there are delayed allocation blocks, then we have to @@ -1840,7 +1846,8 @@ xfs_qm_vop_chown_reserve( } } if (XFS_IS_GQUOTA_ON(ip->i_mount) && gdqp && - ip->i_d.di_gid != be32_to_cpu(gdqp->q_core.d_id)) { + xfs_kgid_to_gid(VFS_I(ip)->i_gid) != + be32_to_cpu(gdqp->q_core.d_id)) { gdq_delblks = gdqp; if (delblks) { ASSERT(ip->i_gdquot); @@ -1937,14 +1944,17 @@ xfs_qm_vop_create_dqattach(

if (udqp && XFS_IS_UQUOTA_ON(mp)) { ASSERT(ip->i_udquot == NULL); - ASSERT(ip->i_d.di_uid == be32_to_cpu(udqp->q_core.d_id)); + ASSERT(xfs_kuid_to_uid(VFS_I(ip)->i_uid) == + be32_to_cpu(udqp->q_core.d_id));

ip->i_udquot = xfs_qm_dqhold(udqp); xfs_trans_mod_dquot(tp, udqp, XFS_TRANS_DQ_ICOUNT, 1); } if (gdqp && XFS_IS_GQUOTA_ON(mp)) { ASSERT(ip->i_gdquot == NULL); - ASSERT(ip->i_d.di_gid == be32_to_cpu(gdqp->q_core.d_id)); + ASSERT(xfs_kgid_to_gid(VFS_I(ip)->i_gid) == + be32_to_cpu(gdqp->q_core.d_id)); + ip->i_gdquot = xfs_qm_dqhold(gdqp); xfs_trans_mod_dquot(tp, gdqp, XFS_TRANS_DQ_ICOUNT, 1); } --- a/fs/xfs/xfs_quota.h +++ b/fs/xfs/xfs_quota.h @@ -86,7 +86,7 @@ extern int xfs_trans_reserve_quota_bydqu struct xfs_mount *, struct xfs_dquot *, struct xfs_dquot *, struct xfs_dquot *, int64_t, long, uint);

-extern int xfs_qm_vop_dqalloc(struct xfs_inode *, xfs_dqid_t, xfs_dqid_t, +extern int xfs_qm_vop_dqalloc(struct xfs_inode *, kuid_t, kgid_t, prid_t, uint, struct xfs_dquot **, struct xfs_dquot **, struct xfs_dquot **); extern void xfs_qm_vop_create_dqattach(struct xfs_trans *, struct xfs_inode *, @@ -109,7 +109,7 @@ extern void xfs_qm_unmount_quotas(struct

#else static inline int -xfs_qm_vop_dqalloc(struct xfs_inode *ip, xfs_dqid_t uid, xfs_dqid_t gid, +xfs_qm_vop_dqalloc(struct xfs_inode *ip, kuid_t kuid, kgid_t kgid, prid_t prid, uint flags, struct xfs_dquot **udqp, struct xfs_dquot **gdqp, struct xfs_dquot **pdqp) { --- a/fs/xfs/xfs_symlink.c +++ b/fs/xfs/xfs_symlink.c @@ -191,9 +191,7 @@ xfs_symlink( /* * Make sure that we have allocated dquot(s) on disk. */ - error = xfs_qm_vop_dqalloc(dp, - xfs_kuid_to_uid(current_fsuid()), - xfs_kgid_to_gid(current_fsgid()), prid, + error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid, XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp, &pdqp); if (error)

From: Christoph Hellwig hch@lst.de

commit b81b79f4eda2ea98ae5695c0b6eb384c8d90b74d upstream.

Add a new wrapper to check if a file system supports the v3 inode format with a larger dinode core. Previously we used xfs_sb_version_hascrc for that, which is technically correct but a little confusing to read.

Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode so that we have one place that documents the superblock version to inode version relationship.

Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Brian Foster bfoster@redhat.com Reviewed-by: Chandan Rajendra chandanrlinux@gmail.com Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/libxfs/xfs_format.h | 17 +++++++++++++++++ fs/xfs/libxfs/xfs_ialloc.c | 4 ++-- fs/xfs/libxfs/xfs_inode_buf.c | 17 +++-------------- fs/xfs/libxfs/xfs_inode_buf.h | 2 -- fs/xfs/libxfs/xfs_trans_resv.c | 2 +- fs/xfs/xfs_buf_item.c | 2 +- fs/xfs/xfs_log_recover.c | 2 +- 7 files changed, 25 insertions(+), 21 deletions(-)

--- a/fs/xfs/libxfs/xfs_format.h +++ b/fs/xfs/libxfs/xfs_format.h @@ -497,6 +497,23 @@ static inline bool xfs_sb_version_hascrc return XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5; }

+/* + * v5 file systems support V3 inodes only, earlier file systems support + * v2 and v1 inodes. + */ +static inline bool xfs_sb_version_has_v3inode(struct xfs_sb *sbp) +{ + return XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5; +} + +static inline bool xfs_dinode_good_version(struct xfs_sb *sbp, + uint8_t version) +{ + if (xfs_sb_version_has_v3inode(sbp)) + return version == 3; + return version == 1 || version == 2; +} + static inline bool xfs_sb_version_has_pquotino(struct xfs_sb *sbp) { return XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5; --- a/fs/xfs/libxfs/xfs_ialloc.c +++ b/fs/xfs/libxfs/xfs_ialloc.c @@ -303,7 +303,7 @@ xfs_ialloc_inode_init( * That means for v3 inode we log the entire buffer rather than just the * inode cores. */ - if (xfs_sb_version_hascrc(&mp->m_sb)) { + if (xfs_sb_version_has_v3inode(&mp->m_sb)) { version = 3; ino = XFS_AGINO_TO_INO(mp, agno, XFS_AGB_TO_AGINO(mp, agbno));

@@ -2818,7 +2818,7 @@ xfs_ialloc_setup_geometry( * cannot change the behavior. */ igeo->inode_cluster_size_raw = XFS_INODE_BIG_CLUSTER_SIZE; - if (xfs_sb_version_hascrc(&mp->m_sb)) { + if (xfs_sb_version_has_v3inode(&mp->m_sb)) { int new_size = igeo->inode_cluster_size_raw;

new_size *= mp->m_sb.sb_inodesize / XFS_DINODE_MIN_SIZE; --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -44,17 +44,6 @@ xfs_inobp_check( } #endif

-bool -xfs_dinode_good_version( - struct xfs_mount *mp, - __u8 version) -{ - if (xfs_sb_version_hascrc(&mp->m_sb)) - return version == 3; - - return version == 1 || version == 2; -} - /* * If we are doing readahead on an inode buffer, we might be in log recovery * reading an inode allocation buffer that hasn't yet been replayed, and hence @@ -93,7 +82,7 @@ xfs_inode_buf_verify( dip = xfs_buf_offset(bp, (i << mp->m_sb.sb_inodelog)); unlinked_ino = be32_to_cpu(dip->di_next_unlinked); di_ok = xfs_verify_magic16(bp, dip->di_magic) && - xfs_dinode_good_version(mp, dip->di_version) && + xfs_dinode_good_version(&mp->m_sb, dip->di_version) && xfs_verify_agino_or_null(mp, agno, unlinked_ino); if (unlikely(XFS_TEST_ERROR(!di_ok, mp, XFS_ERRTAG_ITOBP_INOTOBP))) { @@ -454,7 +443,7 @@ xfs_dinode_verify(

/* Verify v3 integrity information first */ if (dip->di_version >= 3) { - if (!xfs_sb_version_hascrc(&mp->m_sb)) + if (!xfs_sb_version_has_v3inode(&mp->m_sb)) return __this_address; if (!xfs_verify_cksum((char *)dip, mp->m_sb.sb_inodesize, XFS_DINODE_CRC_OFF)) @@ -629,7 +618,7 @@ xfs_iread(

/* shortcut IO on inode allocation if possible */ if ((iget_flags & XFS_IGET_CREATE) && - xfs_sb_version_hascrc(&mp->m_sb) && + xfs_sb_version_has_v3inode(&mp->m_sb) && !(mp->m_flags & XFS_MOUNT_IKEEP)) { /* initialise the on-disk inode core */ memset(&ip->i_d, 0, sizeof(ip->i_d)); --- a/fs/xfs/libxfs/xfs_inode_buf.h +++ b/fs/xfs/libxfs/xfs_inode_buf.h @@ -59,8 +59,6 @@ void xfs_inode_from_disk(struct xfs_inod void xfs_log_dinode_to_disk(struct xfs_log_dinode *from, struct xfs_dinode *to);

-bool xfs_dinode_good_version(struct xfs_mount *mp, __u8 version); - #if defined(DEBUG) void xfs_inobp_check(struct xfs_mount *, struct xfs_buf *); #else --- a/fs/xfs/libxfs/xfs_trans_resv.c +++ b/fs/xfs/libxfs/xfs_trans_resv.c @@ -187,7 +187,7 @@ xfs_calc_inode_chunk_res( XFS_FSB_TO_B(mp, 1)); if (alloc) { /* icreate tx uses ordered buffers */ - if (xfs_sb_version_hascrc(&mp->m_sb)) + if (xfs_sb_version_has_v3inode(&mp->m_sb)) return res; size = XFS_FSB_TO_B(mp, 1); } --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -328,7 +328,7 @@ xfs_buf_item_format( * occurs during recovery. */ if (bip->bli_flags & XFS_BLI_INODE_BUF) { - if (xfs_sb_version_hascrc(&lip->li_mountp->m_sb) || + if (xfs_sb_version_has_v3inode(&lip->li_mountp->m_sb) || !((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) && xfs_log_item_in_current_chkpt(lip))) bip->__bli_format.blf_flags |= XFS_BLF_INODE_BUF; --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -3018,7 +3018,7 @@ xlog_recover_inode_pass2( * superblock flag to determine whether we need to look at di_flushiter * to skip replay when the on disk inode is newer than the log one */ - if (!xfs_sb_version_hascrc(&mp->m_sb) && + if (!xfs_sb_version_has_v3inode(&mp->m_sb) && ldip->di_flushiter < be16_to_cpu(dip->di_flushiter)) { /* * Deal with the wrap case, DI_MAX_FLUSH is less

From: Christoph Hellwig hch@lst.de

commit b3d1d37544d8c98be610df0ed66c884ff18748d5 upstream.

di_flags2 is initialized to zero for v4 and earlier file systems. This means di_flags2 can only be non-zero for a v5 file systems, in which case both the parent and child inodes can store the field. Remove the extra di_version check, and also remove the rather pointless local di_flags2 variable while at it.

Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Brian Foster bfoster@redhat.com Reviewed-by: Chandan Rajendra chandanrlinux@gmail.com Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_inode.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)

--- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -902,20 +902,13 @@ xfs_ialloc(

ip->i_d.di_flags |= di_flags; } - if (pip && - (pip->i_d.di_flags2 & XFS_DIFLAG2_ANY) && - pip->i_d.di_version == 3 && - ip->i_d.di_version == 3) { - uint64_t di_flags2 = 0; - + if (pip && (pip->i_d.di_flags2 & XFS_DIFLAG2_ANY)) { if (pip->i_d.di_flags2 & XFS_DIFLAG2_COWEXTSIZE) { - di_flags2 |= XFS_DIFLAG2_COWEXTSIZE; + ip->i_d.di_flags2 |= XFS_DIFLAG2_COWEXTSIZE; ip->i_d.di_cowextsize = pip->i_d.di_cowextsize; } if (pip->i_d.di_flags2 & XFS_DIFLAG2_DAX) - di_flags2 |= XFS_DIFLAG2_DAX; - - ip->i_d.di_flags2 |= di_flags2; + ip->i_d.di_flags2 |= XFS_DIFLAG2_DAX; } /* FALLTHROUGH */ case S_IFLNK:

From: Christoph Hellwig hch@lst.de

commit 6471e9c5e7a109a952be8e3e80b8d9e262af239d upstream.

We know the version is 3 if on a v5 file system. For earlier file systems formats we always upgrade the remaining v1 inodes to v2 and thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode helper to check if we deal with small or large dinodes, and thus remove the need for the di_version field in struct icdinode.

Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Brian Foster bfoster@redhat.com Reviewed-by: Chandan Rajendra chandanrlinux@gmail.com Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/libxfs/xfs_inode_buf.c | 16 ++++++---------- fs/xfs/libxfs/xfs_inode_buf.h | 1 - fs/xfs/xfs_bmap_util.c | 16 ++++++++-------- fs/xfs/xfs_inode.c | 16 ++-------------- fs/xfs/xfs_inode_item.c | 8 +++----- fs/xfs/xfs_ioctl.c | 5 ++--- fs/xfs/xfs_iops.c | 2 +- fs/xfs/xfs_itable.c | 2 +- fs/xfs/xfs_log_recover.c | 2 +- 9 files changed, 24 insertions(+), 44 deletions(-)

--- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -194,16 +194,14 @@ xfs_inode_from_disk( struct xfs_icdinode *to = &ip->i_d; struct inode *inode = VFS_I(ip);

- /* * Convert v1 inodes immediately to v2 inode format as this is the * minimum inode version format we support in the rest of the code. + * They will also be unconditionally written back to disk as v2 inodes. */ - to->di_version = from->di_version; - if (to->di_version == 1) { + if (unlikely(from->di_version == 1)) { set_nlink(inode, be16_to_cpu(from->di_onlink)); to->di_projid = 0; - to->di_version = 2; } else { set_nlink(inode, be32_to_cpu(from->di_nlink)); to->di_projid = (prid_t)be16_to_cpu(from->di_projid_hi) << 16 | @@ -241,7 +239,7 @@ xfs_inode_from_disk( to->di_dmstate = be16_to_cpu(from->di_dmstate); to->di_flags = be16_to_cpu(from->di_flags);

- if (to->di_version == 3) { + if (xfs_sb_version_has_v3inode(&ip->i_mount->m_sb)) { inode_set_iversion_queried(inode, be64_to_cpu(from->di_changecount)); to->di_crtime.t_sec = be32_to_cpu(from->di_crtime.t_sec); @@ -263,7 +261,6 @@ xfs_inode_to_disk( to->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); to->di_onlink = 0;

- to->di_version = from->di_version; to->di_format = from->di_format; to->di_uid = cpu_to_be32(i_uid_read(inode)); to->di_gid = cpu_to_be32(i_gid_read(inode)); @@ -292,7 +289,8 @@ xfs_inode_to_disk( to->di_dmstate = cpu_to_be16(from->di_dmstate); to->di_flags = cpu_to_be16(from->di_flags);

- if (from->di_version == 3) { + if (xfs_sb_version_has_v3inode(&ip->i_mount->m_sb)) { + to->di_version = 3; to->di_changecount = cpu_to_be64(inode_peek_iversion(inode)); to->di_crtime.t_sec = cpu_to_be32(from->di_crtime.t_sec); to->di_crtime.t_nsec = cpu_to_be32(from->di_crtime.t_nsec); @@ -304,6 +302,7 @@ xfs_inode_to_disk( uuid_copy(&to->di_uuid, &ip->i_mount->m_sb.sb_meta_uuid); to->di_flushiter = 0; } else { + to->di_version = 2; to->di_flushiter = cpu_to_be16(from->di_flushiter); } } @@ -623,7 +622,6 @@ xfs_iread( /* initialise the on-disk inode core */ memset(&ip->i_d, 0, sizeof(ip->i_d)); VFS_I(ip)->i_generation = prandom_u32(); - ip->i_d.di_version = 3; return 0; }

@@ -665,7 +663,6 @@ xfs_iread( * Partial initialisation of the in-core inode. Just the bits * that xfs_ialloc won't overwrite or relies on being correct. */ - ip->i_d.di_version = dip->di_version; VFS_I(ip)->i_generation = be32_to_cpu(dip->di_gen); ip->i_d.di_flushiter = be16_to_cpu(dip->di_flushiter);

@@ -679,7 +676,6 @@ xfs_iread( VFS_I(ip)->i_mode = 0; }

- ASSERT(ip->i_d.di_version >= 2); ip->i_delayed_blks = 0;

/* --- a/fs/xfs/libxfs/xfs_inode_buf.h +++ b/fs/xfs/libxfs/xfs_inode_buf.h @@ -16,7 +16,6 @@ struct xfs_dinode; * format specific structures at the appropriate time. */ struct xfs_icdinode { - int8_t di_version; /* inode version */ int8_t di_format; /* format of di_c data */ uint16_t di_flushiter; /* incremented on flush */ uint32_t di_projid; /* owner's project id */ --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1624,12 +1624,12 @@ xfs_swap_extent_forks( * event of a crash. Set the owner change log flags now and leave the * bmbt scan as the last step. */ - if (ip->i_d.di_version == 3 && - ip->i_d.di_format == XFS_DINODE_FMT_BTREE) - (*target_log_flags) |= XFS_ILOG_DOWNER; - if (tip->i_d.di_version == 3 && - tip->i_d.di_format == XFS_DINODE_FMT_BTREE) - (*src_log_flags) |= XFS_ILOG_DOWNER; + if (xfs_sb_version_has_v3inode(&ip->i_mount->m_sb)) { + if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE) + (*target_log_flags) |= XFS_ILOG_DOWNER; + if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE) + (*src_log_flags) |= XFS_ILOG_DOWNER; + }

/* * Swap the data forks of the inodes @@ -1664,7 +1664,7 @@ xfs_swap_extent_forks( (*src_log_flags) |= XFS_ILOG_DEXT; break; case XFS_DINODE_FMT_BTREE: - ASSERT(ip->i_d.di_version < 3 || + ASSERT(!xfs_sb_version_has_v3inode(&ip->i_mount->m_sb) || (*src_log_flags & XFS_ILOG_DOWNER)); (*src_log_flags) |= XFS_ILOG_DBROOT; break; @@ -1676,7 +1676,7 @@ xfs_swap_extent_forks( break; case XFS_DINODE_FMT_BTREE: (*target_log_flags) |= XFS_ILOG_DBROOT; - ASSERT(tip->i_d.di_version < 3 || + ASSERT(!xfs_sb_version_has_v3inode(&ip->i_mount->m_sb) || (*target_log_flags & XFS_ILOG_DOWNER)); break; } --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -795,15 +795,6 @@ xfs_ialloc( return error; ASSERT(ip != NULL); inode = VFS_I(ip); - - /* - * We always convert v1 inodes to v2 now - we only support filesystems - * with >= v2 inode capability, so there is no reason for ever leaving - * an inode in v1 format. - */ - if (ip->i_d.di_version == 1) - ip->i_d.di_version = 2; - inode->i_mode = mode; set_nlink(inode, nlink); inode->i_uid = current_fsuid(); @@ -841,7 +832,7 @@ xfs_ialloc( ip->i_d.di_dmstate = 0; ip->i_d.di_flags = 0;

- if (ip->i_d.di_version == 3) { + if (xfs_sb_version_has_v3inode(&mp->m_sb)) { inode_set_iversion(inode, 1); ip->i_d.di_flags2 = 0; ip->i_d.di_cowextsize = 0; @@ -849,7 +840,6 @@ xfs_ialloc( ip->i_d.di_crtime.t_nsec = (int32_t)tv.tv_nsec; }

- flags = XFS_ILOG_CORE; switch (mode & S_IFMT) { case S_IFIFO: @@ -1110,7 +1100,6 @@ xfs_bumplink( { xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_CHG);

- ASSERT(ip->i_d.di_version > 1); inc_nlink(VFS_I(ip)); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); } @@ -3822,7 +3811,6 @@ xfs_iflush_int( ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE || ip->i_d.di_nextents > XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK)); ASSERT(iip != NULL && iip->ili_fields != 0); - ASSERT(ip->i_d.di_version > 1);

/* set *dip = inode's place in the buffer */ dip = xfs_buf_offset(bp, ip->i_imap.im_boffset); @@ -3883,7 +3871,7 @@ xfs_iflush_int( * backwards compatibility with old kernels that predate logging all * inode changes. */ - if (ip->i_d.di_version < 3) + if (!xfs_sb_version_has_v3inode(&mp->m_sb)) ip->i_d.di_flushiter++;

/* Check the inline fork data before we write out. */ --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -305,8 +305,6 @@ xfs_inode_to_log_dinode( struct inode *inode = VFS_I(ip);

to->di_magic = XFS_DINODE_MAGIC; - - to->di_version = from->di_version; to->di_format = from->di_format; to->di_uid = i_uid_read(inode); to->di_gid = i_gid_read(inode); @@ -339,7 +337,8 @@ xfs_inode_to_log_dinode( /* log a dummy value to ensure log structure is fully initialised */ to->di_next_unlinked = NULLAGINO;

- if (from->di_version == 3) { + if (xfs_sb_version_has_v3inode(&ip->i_mount->m_sb)) { + to->di_version = 3; to->di_changecount = inode_peek_iversion(inode); to->di_crtime.t_sec = from->di_crtime.t_sec; to->di_crtime.t_nsec = from->di_crtime.t_nsec; @@ -351,6 +350,7 @@ xfs_inode_to_log_dinode( uuid_copy(&to->di_uuid, &ip->i_mount->m_sb.sb_meta_uuid); to->di_flushiter = 0; } else { + to->di_version = 2; to->di_flushiter = from->di_flushiter; } } @@ -395,8 +395,6 @@ xfs_inode_item_format( struct xfs_log_iovec *vecp = NULL; struct xfs_inode_log_format *ilf;

- ASSERT(ip->i_d.di_version > 1); - ilf = xlog_prepare_iovec(lv, &vecp, XLOG_REG_TYPE_IFORMAT); ilf->ilf_type = XFS_LI_INODE; ilf->ilf_ino = ip->i_ino; --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1299,7 +1299,7 @@ xfs_ioctl_setattr_xflags(

/* diflags2 only valid for v3 inodes. */ di_flags2 = xfs_flags2diflags2(ip, fa->fsx_xflags); - if (di_flags2 && ip->i_d.di_version < 3) + if (di_flags2 && !xfs_sb_version_has_v3inode(&mp->m_sb)) return -EINVAL;

ip->i_d.di_flags = xfs_flags2diflags(ip, fa->fsx_xflags); @@ -1638,7 +1638,6 @@ xfs_ioctl_setattr( olddquot = xfs_qm_vop_chown(tp, ip, &ip->i_pdquot, pdqp); } - ASSERT(ip->i_d.di_version > 1); ip->i_d.di_projid = fa->fsx_projid; }

@@ -1651,7 +1650,7 @@ xfs_ioctl_setattr( ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog; else ip->i_d.di_extsize = 0; - if (ip->i_d.di_version == 3 && + if (xfs_sb_version_has_v3inode(&mp->m_sb) && (ip->i_d.di_flags2 & XFS_DIFLAG2_COWEXTSIZE)) ip->i_d.di_cowextsize = fa->fsx_cowextsize >> mp->m_sb.sb_blocklog; --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -517,7 +517,7 @@ xfs_vn_getattr( stat->blocks = XFS_FSB_TO_BB(mp, ip->i_d.di_nblocks + ip->i_delayed_blks);

- if (ip->i_d.di_version == 3) { + if (xfs_sb_version_has_v3inode(&mp->m_sb)) { if (request_mask & STATX_BTIME) { stat->result_mask |= STATX_BTIME; stat->btime.tv_sec = ip->i_d.di_crtime.t_sec; --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -110,7 +110,7 @@ xfs_bulkstat_one_int( buf->bs_forkoff = XFS_IFORK_BOFF(ip); buf->bs_version = XFS_BULKSTAT_VERSION_V5;

- if (dic->di_version == 3) { + if (xfs_sb_version_has_v3inode(&mp->m_sb)) { if (dic->di_flags2 & XFS_DIFLAG2_COWEXTSIZE) buf->bs_cowextsize_blks = dic->di_cowextsize; } --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2879,8 +2879,8 @@ xfs_recover_inode_owner_change( return -ENOMEM;

/* instantiate the inode */ + ASSERT(dip->di_version >= 3); xfs_inode_from_disk(ip, dip); - ASSERT(ip->i_d.di_version >= 3);

error = xfs_iformat_fork(ip, dip); if (error)

From: Jeffrey Mitchell jeffrey.mitchell@starlab.io

commit 8aa921a95335d0a8c8e2be35a44467e7c91ec3e4 upstream.

When XFS creates a new symlink, it writes its size to disk but not to the VFS inode. This causes i_size_read() to return 0 for that symlink until it is re-read from disk, for example when the system is rebooted.

I found this inconsistency while protecting directories with eCryptFS. The command "stat path/to/symlink/in/ecryptfs" will report "Size: 0" if the symlink was created after the last reboot on an XFS root.

Call i_size_write() in xfs_symlink()

Signed-off-by: Jeffrey Mitchell jeffrey.mitchell@starlab.io Reviewed-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Darrick J. Wong djwong@kernel.org Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Brian Foster bfoster@redhat.com Signed-off-by: Amir Goldstein amir73il@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_symlink.c | 1 + 1 file changed, 1 insertion(+)

--- a/fs/xfs/xfs_symlink.c +++ b/fs/xfs/xfs_symlink.c @@ -314,6 +314,7 @@ xfs_symlink( } ASSERT(pathlen == 0); } + i_size_write(VFS_I(ip), ip->i_d.di_size);

/* * Create the directory entry for the symlink.

From: "Darrick J. Wong" djwong@kernel.org

commit 2a4bdfa8558ca2904dc17b83497dc82aa7fc05e9 upstream.

If we ever screw up the quota reservations enough to trip the assertions, something's wrong with the quota code. Shut down the filesystem when this happens, because this is corruption.

Signed-off-by: Darrick J. Wong djwong@kernel.org Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Brian Foster bfoster@redhat.com Signed-off-by: Amir Goldstein amir73il@gmail.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_trans_dquot.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/fs/xfs/xfs_trans_dquot.c +++ b/fs/xfs/xfs_trans_dquot.c @@ -15,6 +15,7 @@ #include "xfs_trans_priv.h" #include "xfs_quota.h" #include "xfs_qm.h" +#include "xfs_error.h"

STATIC void xfs_trans_alloc_dqinfo(xfs_trans_t *);

@@ -700,9 +701,14 @@ xfs_trans_dqresv( XFS_TRANS_DQ_RES_INOS, ninos); } - ASSERT(dqp->q_res_bcount >= be64_to_cpu(dqp->q_core.d_bcount)); - ASSERT(dqp->q_res_rtbcount >= be64_to_cpu(dqp->q_core.d_rtbcount)); - ASSERT(dqp->q_res_icount >= be64_to_cpu(dqp->q_core.d_icount)); + + if (XFS_IS_CORRUPT(mp, + dqp->q_res_bcount < be64_to_cpu(dqp->q_core.d_bcount)) || + XFS_IS_CORRUPT(mp, + dqp->q_res_rtbcount < be64_to_cpu(dqp->q_core.d_rtbcount)) || + XFS_IS_CORRUPT(mp, + dqp->q_res_icount < be64_to_cpu(dqp->q_core.d_icount))) + goto error_corrupt;

xfs_dqunlock(dqp); return 0; @@ -712,6 +718,10 @@ error_return: if (flags & XFS_QMOPT_ENOSPC) return -ENOSPC; return -EDQUOT; +error_corrupt: + xfs_dqunlock(dqp); + xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); + return -EFSCORRUPTED; }

From: Brian Foster bfoster@redhat.com

commit 06058bc40534530e617e5623775c53bb24f032cb upstream.

Freed extents are marked busy from the point the freeing transaction commits until the associated CIL context is checkpointed to the log. This prevents reuse and overwrite of recently freed blocks before the changes are committed to disk, which can lead to corruption after a crash. The exception to this rule is that metadata allocation is allowed to reuse busy extents because metadata changes are also logged.

As of commit 97d3ac75e5e0 ("xfs: exact busy extent tracking"), XFS has allowed modification or complete invalidation of outstanding busy extents for metadata allocations. This implementation assumes that use of the associated extent is imminent, which is not always the case. For example, the trimmed extent might not satisfy the minimum length of the allocation request, or the allocation algorithm might be involved in a search for the optimal result based on locality.

generic/019 reproduces a corruption caused by this scenario. First, a metadata block (usually a bmbt or symlink block) is freed from an inode. A subsequent bmbt split on an unrelated inode attempts a near mode allocation request that invalidates the busy block during the search, but does not ultimately allocate it. Due to the busy state invalidation, the block is no longer considered busy to subsequent allocation. A direct I/O write request immediately allocates the block and writes to it. Finally, the filesystem crashes while in a state where the initial metadata block free had not committed to the on-disk log. After recovery, the original metadata block is in its original location as expected, but has been corrupted by the aforementioned dio.

This demonstrates that it is fundamentally unsafe to modify busy extent state for extents that are not guaranteed to be allocated. This applies to pretty much all of the code paths that currently trim busy extents for one reason or another. Therefore to address this problem, drop the reuse mechanism from the busy extent trim path. This code already knows how to return partial non-busy ranges of the targeted free extent and higher level code tracks the busy state of the allocation attempt. If a block allocation fails where one or more candidate extents is busy, we force the log and retry the allocation.

Signed-off-by: Brian Foster bfoster@redhat.com Reviewed-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Darrick J. Wong djwong@kernel.org Reviewed-by: Chandan Babu R chandanrlinux@gmail.com Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Amir Goldstein amir73il@gmail.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Chandan Babu R chandan.babu@oracle.com Acked-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_extent_busy.c | 14 -------------- 1 file changed, 14 deletions(-)

--- a/fs/xfs/xfs_extent_busy.c +++ b/fs/xfs/xfs_extent_busy.c @@ -344,7 +344,6 @@ xfs_extent_busy_trim( ASSERT(*len > 0);

spin_lock(&args->pag->pagb_lock); -restart: fbno = *bno; flen = *len; rbp = args->pag->pagb_tree.rb_node; @@ -363,19 +362,6 @@ restart: continue; }

- /* - * If this is a metadata allocation, try to reuse the busy - * extent instead of trimming the allocation. - */ - if (!xfs_alloc_is_userdata(args->datatype) && - !(busyp->flags & XFS_EXTENT_BUSY_DISCARDED)) { - if (!xfs_extent_busy_update_extent(args->mp, args->pag, - busyp, fbno, flen, - false)) - goto restart; - continue; - } - if (bbno <= fbno) { /* start overlap */