From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 6dd9a236042e305d7b69ee92db7347bf5943e7d3 ]
The symbol's prompt should be a one-line description, instead of just duplicating the symbol name.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/microchip/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/microchip/Kconfig b/drivers/soc/microchip/Kconfig index eb656b33156ba..f19e74d342aa2 100644 --- a/drivers/soc/microchip/Kconfig +++ b/drivers/soc/microchip/Kconfig @@ -1,5 +1,5 @@ config POLARFIRE_SOC_SYS_CTRL - tristate "POLARFIRE_SOC_SYS_CTRL" + tristate "Microchip PolarFire SoC (MPFS) system controller support" depends on POLARFIRE_SOC_MAILBOX help This driver adds support for the PolarFire SoC (MPFS) system controller.
From: Sebastian Reichel sebastian.reichel@collabora.com
[ Upstream commit fc4657971be31ae679e2bbeee2fb8e93a7a063eb ]
Mark the primary PMIC as system-power-controller, so that the system properly shuts down on poweroff.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Link: https://lore.kernel.org/r/20240117191555.86138-1-sebastian.reichel@collabora... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 229a9111f5eb0..fa8286a325af7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -215,6 +215,7 @@ pmic@0 { <&rk806_dvs2_null>, <&rk806_dvs3_null>; pinctrl-names = "default"; spi-max-frequency = <1000000>; + system-power-controller;
vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>;
From: Leon Romanovsky leonro@nvidia.com
[ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ]
------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_64+0x59/0x90 ? do_user_addr_fault+0x1d0/0x640 ? exit_to_user_mode_prepare+0x3b/0xd0 ? irqentry_exit_to_user_mode+0x9/0x20 ? irqentry_exit+0x43/0x50 ? exc_page_fault+0x92/0x1b0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc03ad14a37 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50 </TASK> ---[ end trace 0000000000000000 ]---
Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.170643393... Signed-off-by: Leon Romanovsky leonro@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/wr.c | 2 +- include/linux/mlx5/qp.h | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/wr.c b/drivers/infiniband/hw/mlx5/wr.c index df1d1b0a3ef72..9947feb7fb8a0 100644 --- a/drivers/infiniband/hw/mlx5/wr.c +++ b/drivers/infiniband/hw/mlx5/wr.c @@ -78,7 +78,7 @@ static void set_eth_seg(const struct ib_send_wr *wr, struct mlx5_ib_qp *qp, */ copysz = min_t(u64, *cur_edge - (void *)eseg->inline_hdr.start, left); - memcpy(eseg->inline_hdr.start, pdata, copysz); + memcpy(eseg->inline_hdr.data, pdata, copysz); stride = ALIGN(sizeof(struct mlx5_wqe_eth_seg) - sizeof(eseg->inline_hdr.start) + copysz, 16); *size += stride / 16; diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index bd53cf4be7bdc..f0e55bf3ec8b5 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -269,7 +269,10 @@ struct mlx5_wqe_eth_seg { union { struct { __be16 sz; - u8 start[2]; + union { + u8 start[2]; + DECLARE_FLEX_ARRAY(u8, data); + }; } inline_hdr; struct { __be16 type;
From: Yishai Hadas yishaih@nvidia.com
[ Upstream commit be551ee1574280ef8afbf7c271212ac3e38933ef ]
Relax DEVX access upon modify commands to be UVERBS_ACCESS_READ.
The kernel doesn't need to protect what firmware protects, or what causes no damage to anyone but the user.
As firmware needs to protect itself from parallel access to the same object, don't block parallel modify/query commands on the same object in the kernel side.
This change will allow user space application to run parallel updates to different entries in the same bulk object.
Tested-by: Tamar Mashiah tmashiah@nvidia.com Signed-off-by: Yishai Hadas yishaih@nvidia.com Reviewed-by: Michael Guralnik michaelgur@nvidia.com Link: https://lore.kernel.org/r/7407d5ed35dc427c1097699e12b49c01e1073406.170643393... Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/devx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c index 8ba53edf23119..6e19974ecf6e7 100644 --- a/drivers/infiniband/hw/mlx5/devx.c +++ b/drivers/infiniband/hw/mlx5/devx.c @@ -2949,7 +2949,7 @@ DECLARE_UVERBS_NAMED_METHOD( MLX5_IB_METHOD_DEVX_OBJ_MODIFY, UVERBS_ATTR_IDR(MLX5_IB_ATTR_DEVX_OBJ_MODIFY_HANDLE, UVERBS_IDR_ANY_OBJECT, - UVERBS_ACCESS_WRITE, + UVERBS_ACCESS_READ, UA_MANDATORY), UVERBS_ATTR_PTR_IN( MLX5_IB_ATTR_DEVX_OBJ_MODIFY_CMD_IN,
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit f98643d8daf3443e3b414a82d0cb3d745f8c8bbc ]
The binding doesn't define interrupts and adding such a definition was refused because it's unclear how they should ever be used and the relevant registers are outside the PWM range. So drop them fixing several dtbs_check warnings like:
arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20240129113205.2453029-2-u.kleine-koenig@pengutron... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rockchip/rv1108.dtsi | 8 -------- 1 file changed, 8 deletions(-)
diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi index abf3006f0a842..f3291f3bbc6fd 100644 --- a/arch/arm/boot/dts/rockchip/rv1108.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi @@ -196,7 +196,6 @@ spi: spi@10270000 { pwm4: pwm@10280000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280000 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -208,7 +207,6 @@ pwm4: pwm@10280000 { pwm5: pwm@10280010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280010 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -220,7 +218,6 @@ pwm5: pwm@10280010 { pwm6: pwm@10280020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280020 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -232,7 +229,6 @@ pwm6: pwm@10280020 { pwm7: pwm@10280030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280030 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -386,7 +382,6 @@ i2c0: i2c@20000000 { pwm0: pwm@20040000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040000 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -398,7 +393,6 @@ pwm0: pwm@20040000 { pwm1: pwm@20040010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040010 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -410,7 +404,6 @@ pwm1: pwm@20040010 { pwm2: pwm@20040020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040020 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -422,7 +415,6 @@ pwm2: pwm@20040020 { pwm3: pwm@20040030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040030 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
From: Conor Dooley conor.dooley@microchip.com
[ Upstream commit ce6b6d1513965f500a05f3facf223fa01fd74920 ]
At W=2 dtc complains: hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider
Add the missing property.
Reviewed-by: Samuel Holland samuel.holland@sifive.com Signed-off-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index 07387f9c135ca..72b87b08ab444 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -123,6 +123,7 @@ pmic@58 { interrupt-parent = <&gpio>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
onkey { compatible = "dlg,da9063-onkey";
From: Hou Tao houtao1@huawei.com
[ Upstream commit ee0e39a63b78849f8abbef268b13e4838569f646 ]
Move is_vsyscall_vaddr() into asm/vsyscall.h to make it available for copy_from_kernel_nofault_allowed() in arch/x86/mm/maccess.c.
Reviewed-by: Sohil Mehta sohil.mehta@intel.com Signed-off-by: Hou Tao houtao1@huawei.com Link: https://lore.kernel.org/r/20240202103935.3154011-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/vsyscall.h | 10 ++++++++++ arch/x86/mm/fault.c | 9 --------- 2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h index ab60a71a8dcb9..472f0263dbc61 100644 --- a/arch/x86/include/asm/vsyscall.h +++ b/arch/x86/include/asm/vsyscall.h @@ -4,6 +4,7 @@
#include <linux/seqlock.h> #include <uapi/asm/vsyscall.h> +#include <asm/page_types.h>
#ifdef CONFIG_X86_VSYSCALL_EMULATION extern void map_vsyscall(void); @@ -24,4 +25,13 @@ static inline bool emulate_vsyscall(unsigned long error_code, } #endif
+/* + * The (legacy) vsyscall page is the long page in the kernel portion + * of the address space that has user-accessible permissions. + */ +static inline bool is_vsyscall_vaddr(unsigned long vaddr) +{ + return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR); +} + #endif /* _ASM_X86_VSYSCALL_H */ diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index ab778eac19520..a9d69ec994b75 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -798,15 +798,6 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code, show_opcodes(regs, loglvl); }
-/* - * The (legacy) vsyscall page is the long page in the kernel portion - * of the address space that has user-accessible permissions. - */ -static bool is_vsyscall_vaddr(unsigned long vaddr) -{ - return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR); -} - static void __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code, unsigned long address, u32 pkey, int si_code)
From: Hou Tao houtao1@huawei.com
[ Upstream commit 32019c659ecfe1d92e3bf9fcdfbb11a7c70acd58 ]
When trying to use copy_from_kernel_nofault() to read vsyscall page through a bpf program, the following oops was reported:
BUG: unable to handle page fault for address: ffffffffff600000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:copy_from_kernel_nofault+0x6f/0x110 ...... Call Trace: <TASK> ? copy_from_kernel_nofault+0x6f/0x110 bpf_probe_read_kernel+0x1d/0x50 bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d trace_call_bpf+0xc5/0x1c0 perf_call_bpf_enter.isra.0+0x69/0xb0 perf_syscall_enter+0x13e/0x200 syscall_trace_enter+0x188/0x1c0 do_syscall_64+0xb5/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ...... ---[ end trace 0000000000000000 ]---
The oops is triggered when:
1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall page and invokes copy_from_kernel_nofault() which in turn calls __get_user_asm().
2) Because the vsyscall page address is not readable from kernel space, a page fault exception is triggered accordingly.
3) handle_page_fault() considers the vsyscall page address as a user space address instead of a kernel space address. This results in the fix-up setup by bpf not being applied and a page_fault_oops() is invoked due to SMAP.
Considering handle_page_fault() has already considered the vsyscall page address as a userspace address, fix the problem by disallowing vsyscall page read for copy_from_kernel_nofault().
Originally-by: Thomas Gleixner tglx@linutronix.de Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-... Reported-by: xingwei lee xrivendell7@gmail.com Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33Lv... Signed-off-by: Hou Tao houtao1@huawei.com Reviewed-by: Sohil Mehta sohil.mehta@intel.com Acked-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/maccess.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c index 6993f026adec9..42115ac079cfe 100644 --- a/arch/x86/mm/maccess.c +++ b/arch/x86/mm/maccess.c @@ -3,6 +3,8 @@ #include <linux/uaccess.h> #include <linux/kernel.h>
+#include <asm/vsyscall.h> + #ifdef CONFIG_X86_64 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size) { @@ -15,6 +17,14 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size) if (vaddr < TASK_SIZE_MAX + PAGE_SIZE) return false;
+ /* + * Reading from the vsyscall page may cause an unhandled fault in + * certain cases. Though it is at an address above TASK_SIZE_MAX, it is + * usually considered as a user space address. + */ + if (is_vsyscall_vaddr(vaddr)) + return false; + /* * Allow everything during early boot before 'x86_virt_bits' * is initialized. Needed for instruction decoding in early
From: Alexander Gordeev agordeev@linux.ibm.com
[ Upstream commit b4ea9b6a18ebf7f9f3a7a60f82e925186978cfcf ]
iucv_path_table is a dynamically allocated array of pointers to struct iucv_path items. Yet, its size is calculated as if it was an array of struct iucv_path items.
Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Reviewed-by: Alexandra Winter wintera@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/iucv/iucv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index fc3fddeb6f36d..f66b5f74cd83a 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -156,7 +156,7 @@ static char iucv_error_pathid[16] = "INVALID PATHID"; static LIST_HEAD(iucv_handler_list);
/* - * iucv_path_table: an array of iucv_path structures. + * iucv_path_table: array of pointers to iucv_path structures. */ static struct iucv_path **iucv_path_table; static unsigned long iucv_max_pathid; @@ -544,7 +544,7 @@ static int iucv_enable(void)
cpus_read_lock(); rc = -ENOMEM; - alloc_size = iucv_max_pathid * sizeof(struct iucv_path); + alloc_size = iucv_max_pathid * sizeof(*iucv_path_table); iucv_path_table = kzalloc(alloc_size, GFP_KERNEL); if (!iucv_path_table) goto out;
From: Max Kellermann max.kellermann@ionos.com
[ Upstream commit 250f5402e636a5cec9e0e95df252c3d54307210f ]
Fixes a bug revealed by -Wmissing-prototypes when CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:
arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes] 82 | int ftrace_enable_ftrace_graph_caller(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes] 88 | int ftrace_disable_ftrace_graph_caller(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Max Kellermann max.kellermann@ionos.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c index d1defb9ede70c..621a4b386ae4f 100644 --- a/arch/parisc/kernel/ftrace.c +++ b/arch/parisc/kernel/ftrace.c @@ -78,7 +78,7 @@ asmlinkage void notrace __hot ftrace_function_trampoline(unsigned long parent, #endif }
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER) int ftrace_enable_ftrace_graph_caller(void) { static_key_enable(&ftrace_graph_enable.key);
From: Greg Joyce gjoyce@linux.ibm.com
[ Upstream commit 5429c8de56f6b2bd8f537df3a1e04e67b9c04282 ]
The SED Opal response parsing function response_parse() does not handle the case of an empty atom in the response. This causes the entry count to be too high and the response fails to be parsed. Recognizing, but ignoring, empty atoms allows response handling to succeed.
Signed-off-by: Greg Joyce gjoyce@linux.ibm.com Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/opal_proto.h | 1 + block/sed-opal.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/block/opal_proto.h b/block/opal_proto.h index dec7ce3a3edb7..d247a457bf6e3 100644 --- a/block/opal_proto.h +++ b/block/opal_proto.h @@ -71,6 +71,7 @@ enum opal_response_token { #define SHORT_ATOM_BYTE 0xBF #define MEDIUM_ATOM_BYTE 0xDF #define LONG_ATOM_BYTE 0xE3 +#define EMPTY_ATOM_BYTE 0xFF
#define OPAL_INVAL_PARAM 12 #define OPAL_MANUFACTURED_INACTIVE 0x08 diff --git a/block/sed-opal.c b/block/sed-opal.c index 04f38a3f5d959..e27109be77690 100644 --- a/block/sed-opal.c +++ b/block/sed-opal.c @@ -1055,16 +1055,20 @@ static int response_parse(const u8 *buf, size_t length, token_length = response_parse_medium(iter, pos); else if (pos[0] <= LONG_ATOM_BYTE) /* long atom */ token_length = response_parse_long(iter, pos); + else if (pos[0] == EMPTY_ATOM_BYTE) /* empty atom */ + token_length = 1; else /* TOKEN */ token_length = response_parse_token(iter, pos);
if (token_length < 0) return token_length;
+ if (pos[0] != EMPTY_ATOM_BYTE) + num_entries++; + pos += token_length; total -= token_length; iter++; - num_entries++; }
resp->num = num_entries;
From: Alison Schofield alison.schofield@intel.com
[ Upstream commit 453a7fde8031a5192ed2f9646ad048c1a5e930dc ]
In preparation for adding a new caller of cxl_region_find_decoders() teach it to find a decoder from a cxl_endpoint_decoder structure.
Combining switch and endpoint decoder lookup in one function prevents code duplication in call sites.
Update the existing caller.
Signed-off-by: Alison Schofield alison.schofield@intel.com Tested-by: Wonjae Lee wj28.lee@samsung.com Link: https://lore.kernel.org/r/79ae6d72978ef9f3ceec9722e1cb793820553c8e.170673686... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cxl/core/region.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c index 6ebd12f7970bc..a3d82ef5599e8 100644 --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -729,12 +729,17 @@ static int match_auto_decoder(struct device *dev, void *data) return 0; }
-static struct cxl_decoder *cxl_region_find_decoder(struct cxl_port *port, - struct cxl_region *cxlr) +static struct cxl_decoder * +cxl_region_find_decoder(struct cxl_port *port, + struct cxl_endpoint_decoder *cxled, + struct cxl_region *cxlr) { struct device *dev; int id = 0;
+ if (port == cxled_to_port(cxled)) + return &cxled->cxld; + if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) dev = device_find_child(&port->dev, &cxlr->params, match_auto_decoder); @@ -852,10 +857,7 @@ static int cxl_rr_alloc_decoder(struct cxl_port *port, struct cxl_region *cxlr, { struct cxl_decoder *cxld;
- if (port == cxled_to_port(cxled)) - cxld = &cxled->cxld; - else - cxld = cxl_region_find_decoder(port, cxlr); + cxld = cxl_region_find_decoder(port, cxled, cxlr); if (!cxld) { dev_dbg(&cxlr->dev, "%s: no decoder available\n", dev_name(&port->dev));
From: Alison Schofield alison.schofield@intel.com
[ Upstream commit cb66b1d60c283bb340a2fc19deff7de8acea74b1 ]
Autodiscovered regions can fail to assemble if they are not discovered in HPA decode order. The user will see failure messages like:
[] cxl region0: endpoint5: HPA order violation region1 [] cxl region0: endpoint5: failed to allocate region reference
The check that is causing the failure helps the CXL driver enforce a CXL spec mandate that decoders be committed in HPA order. The check is needless for autodiscovered regions since their decoders are already programmed. Trying to enforce order in the assembly of these regions is useless because they are assembled once all their member endpoints arrive, and there is no guarantee on the order in which endpoints are discovered during probe.
Keep the existing check, but for autodiscovered regions, allow the out of order assembly after a sanity check that the lesser numbered decoder has the lesser HPA starting address.
Signed-off-by: Alison Schofield alison.schofield@intel.com Tested-by: Wonjae Lee wj28.lee@samsung.com Link: https://lore.kernel.org/r/3dec69ee97524ab229a20c6739272c3000b18408.170673686... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cxl/core/region.c | 48 +++++++++++++++++++++++++++++++-------- 1 file changed, 38 insertions(+), 10 deletions(-)
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c index a3d82ef5599e8..e2a82ee4ff0cf 100644 --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -757,8 +757,31 @@ cxl_region_find_decoder(struct cxl_port *port, return to_cxl_decoder(dev); }
-static struct cxl_region_ref *alloc_region_ref(struct cxl_port *port, - struct cxl_region *cxlr) +static bool auto_order_ok(struct cxl_port *port, struct cxl_region *cxlr_iter, + struct cxl_decoder *cxld) +{ + struct cxl_region_ref *rr = cxl_rr_load(port, cxlr_iter); + struct cxl_decoder *cxld_iter = rr->decoder; + + /* + * Allow the out of order assembly of auto-discovered regions. + * Per CXL Spec 3.1 8.2.4.20.12 software must commit decoders + * in HPA order. Confirm that the decoder with the lesser HPA + * starting address has the lesser id. + */ + dev_dbg(&cxld->dev, "check for HPA violation %s:%d < %s:%d\n", + dev_name(&cxld->dev), cxld->id, + dev_name(&cxld_iter->dev), cxld_iter->id); + + if (cxld_iter->id > cxld->id) + return true; + + return false; +} + +static struct cxl_region_ref * +alloc_region_ref(struct cxl_port *port, struct cxl_region *cxlr, + struct cxl_endpoint_decoder *cxled) { struct cxl_region_params *p = &cxlr->params; struct cxl_region_ref *cxl_rr, *iter; @@ -768,16 +791,21 @@ static struct cxl_region_ref *alloc_region_ref(struct cxl_port *port, xa_for_each(&port->regions, index, iter) { struct cxl_region_params *ip = &iter->region->params;
- if (!ip->res) + if (!ip->res || ip->res->start < p->res->start) continue;
- if (ip->res->start > p->res->start) { - dev_dbg(&cxlr->dev, - "%s: HPA order violation %s:%pr vs %pr\n", - dev_name(&port->dev), - dev_name(&iter->region->dev), ip->res, p->res); - return ERR_PTR(-EBUSY); + if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) { + struct cxl_decoder *cxld; + + cxld = cxl_region_find_decoder(port, cxled, cxlr); + if (auto_order_ok(port, iter->region, cxld)) + continue; } + dev_dbg(&cxlr->dev, "%s: HPA order violation %s:%pr vs %pr\n", + dev_name(&port->dev), + dev_name(&iter->region->dev), ip->res, p->res); + + return ERR_PTR(-EBUSY); }
cxl_rr = kzalloc(sizeof(*cxl_rr), GFP_KERNEL); @@ -954,7 +982,7 @@ static int cxl_port_attach_region(struct cxl_port *port, nr_targets_inc = true; } } else { - cxl_rr = alloc_region_ref(port, cxlr); + cxl_rr = alloc_region_ref(port, cxlr, cxled); if (IS_ERR(cxl_rr)) { dev_dbg(&cxlr->dev, "%s: failed to allocate region reference\n",
From: Kees Cook keescook@chromium.org
[ Upstream commit 40b9385dd8e6a0515e1c9cd06a277483556b7286 ]
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel code base has been converted to flexible arrays. In order to enforce the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized destinations need to be handled. Unfortunately, struct vic_provinfo resists full conversion, as it contains a flexible array of flexible arrays, which is only possible with the 0-sized fake flexible array.
Use unsafe_memcpy() to avoid future false positives under CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cisco/enic/vnic_vic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cisco/enic/vnic_vic.c b/drivers/net/ethernet/cisco/enic/vnic_vic.c index 20fcb20b42ede..66b5778353389 100644 --- a/drivers/net/ethernet/cisco/enic/vnic_vic.c +++ b/drivers/net/ethernet/cisco/enic/vnic_vic.c @@ -49,7 +49,8 @@ int vic_provinfo_add_tlv(struct vic_provinfo *vp, u16 type, u16 length,
tlv->type = htons(type); tlv->length = htons(length); - memcpy(tlv->value, value, length); + unsafe_memcpy(tlv->value, value, length, + /* Flexible array of flexible arrays */);
vp->num_tlvs = htonl(ntohl(vp->num_tlvs) + 1); vp->length = htonl(ntohl(vp->length) +
From: Hojin Nam hj96.nam@samsung.com
[ Upstream commit 802379b8f9e169293e9ba7089e5f1a6340e2e7a3 ]
CPMU filter value is described as 4B length in CXL r3.0 8.2.7.2.2. However, it is used as 2B length in code and comments.
Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Hojin Nam hj96.nam@samsung.com Link: https://lore.kernel.org/r/20240216014522.32321-1-hj96.nam@samsung.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/cxl_pmu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/perf/cxl_pmu.c b/drivers/perf/cxl_pmu.c index bc0d414a6aff9..308c9969642e1 100644 --- a/drivers/perf/cxl_pmu.c +++ b/drivers/perf/cxl_pmu.c @@ -59,7 +59,7 @@ #define CXL_PMU_COUNTER_CFG_EVENT_GRP_ID_IDX_MSK GENMASK_ULL(63, 59)
#define CXL_PMU_FILTER_CFG_REG(n, f) (0x400 + 4 * ((f) + (n) * 8)) -#define CXL_PMU_FILTER_CFG_VALUE_MSK GENMASK(15, 0) +#define CXL_PMU_FILTER_CFG_VALUE_MSK GENMASK(31, 0)
#define CXL_PMU_COUNTER_REG(n) (0xc00 + 8 * (n))
@@ -314,9 +314,9 @@ static bool cxl_pmu_config1_get_edge(struct perf_event *event) }
/* - * CPMU specification allows for 8 filters, each with a 16 bit value... - * So we need to find 8x16bits to store it in. - * As the value used for disable is 0xffff, a separate enable switch + * CPMU specification allows for 8 filters, each with a 32 bit value... + * So we need to find 8x32bits to store it in. + * As the value used for disable is 0xffff_ffff, a separate enable switch * is needed. */
@@ -642,7 +642,7 @@ static void cxl_pmu_event_start(struct perf_event *event, int flags) if (cxl_pmu_config1_hdm_filter_en(event)) cfg = cxl_pmu_config2_get_hdm_decoder(event); else - cfg = GENMASK(15, 0); /* No filtering if 0xFFFF_FFFF */ + cfg = GENMASK(31, 0); /* No filtering if 0xFFFF_FFFF */ writeq(cfg, base + CXL_PMU_FILTER_CFG_REG(hwc->idx, 0)); }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 8215ca518164d35f10c0b5545c8bb80f538638b8 ]
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen, not a Goodix touchscreen.
Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios to correctly reflect this.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/x86-android-tablets/other.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c index e79549c6aae17..fe5f68fa7bca7 100644 --- a/drivers/platform/x86/x86-android-tablets/other.c +++ b/drivers/platform/x86/x86-android-tablets/other.c @@ -66,7 +66,7 @@ static const struct x86_i2c_client_info acer_b1_750_i2c_clients[] __initconst = }, };
-static struct gpiod_lookup_table acer_b1_750_goodix_gpios = { +static struct gpiod_lookup_table acer_b1_750_nvt_ts_gpios = { .dev_id = "i2c-NVT-ts", .table = { GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_LOW), @@ -75,7 +75,7 @@ static struct gpiod_lookup_table acer_b1_750_goodix_gpios = { };
static struct gpiod_lookup_table * const acer_b1_750_gpios[] = { - &acer_b1_750_goodix_gpios, + &acer_b1_750_nvt_ts_gpios, &int3496_reference_gpios, NULL };
From: Mikulas Patocka mpatocka@redhat.com
[ Upstream commit 787f1b2800464aa277236a66eb3c279535edd460 ]
"struct bvec_iter" is defined with the __packed attribute, so it is aligned on a single byte. On X86 (and on other architectures that support unaligned addresses in hardware), "struct bvec_iter" is accessed using the 8-byte and 4-byte memory instructions, however these instructions are less efficient if they operate on unaligned addresses.
(on RISC machines that don't have unaligned access in hardware, GCC generates byte-by-byte accesses that are very inefficient - see [1])
This commit reorders the entries in "struct dm_verity_io" and "struct convert_context", so that "struct bvec_iter" is aligned on 8 bytes.
[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-crypt.c | 4 ++-- drivers/md/dm-verity.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 1a539ec81bacc..a230b0639f81b 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -53,11 +53,11 @@ struct convert_context { struct completion restart; struct bio *bio_in; - struct bio *bio_out; struct bvec_iter iter_in; + struct bio *bio_out; struct bvec_iter iter_out; - u64 cc_sector; atomic_t cc_pending; + u64 cc_sector; union { struct skcipher_request *req; struct aead_request *req_aead; diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h index f3f6070084196..5265b0d9ea37c 100644 --- a/drivers/md/dm-verity.h +++ b/drivers/md/dm-verity.h @@ -76,12 +76,12 @@ struct dm_verity_io { /* original value of bio->bi_end_io */ bio_end_io_t *orig_bi_end_io;
+ struct bvec_iter iter; + sector_t block; unsigned int n_blocks; bool in_tasklet;
- struct bvec_iter iter; - struct work_struct work;
/*
From: Rob Herring robh@kernel.org
[ Upstream commit 96fd598e9c34cfa68402a4da3020c9236cfacf35 ]
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled.
Signed-off-by: Rob Herring robh@kernel.org Reviewed-by: Andrew Jeffery andrew@codeconstruct.com.au Reviewed-by: Alexandre Torgue alexandre.torgue@foss.st.com Acked-by: Florian Fainelli florian.fainelli@broadcom.com #Broadcom Acked-by: Thierry Reding treding@nvidia.com Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/amazon/alpine.dtsi | 1 - arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 -------------- arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +-------------- arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 ++---------------- arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 +++ arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 + arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 ++ arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 ++ arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 2 ++ .../boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 - arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 - arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 3 --- arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 1 - .../dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 1 + .../nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 1 + arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 + .../boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 1 + arch/arm/boot/dts/st/stm32429i-eval.dts | 1 - arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 1 - .../boot/dts/ti/omap/am5729-beagleboneai.dts | 1 - 24 files changed, 18 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi index ff68dfb4eb787..90bd12feac010 100644 --- a/arch/arm/boot/dts/amazon/alpine.dtsi +++ b/arch/arm/boot/dts/amazon/alpine.dtsi @@ -167,7 +167,6 @@ pcie@fbc00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <96>; al,msi-num-spis = <64>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 530491ae5eb26..857cb26ed6d7e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 { i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -482,7 +481,6 @@ i2c0: i2c-bus@40 { i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x80 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -498,7 +496,6 @@ i2c1: i2c-bus@80 { i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0xc0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 { i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x100 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -532,7 +528,6 @@ i2c3: i2c-bus@100 { i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x140 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -549,7 +544,6 @@ i2c4: i2c-bus@140 { i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x180 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -566,7 +560,6 @@ i2c5: i2c-bus@180 { i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x1c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 { i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x300 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -600,7 +592,6 @@ i2c7: i2c-bus@300 { i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x340 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -617,7 +608,6 @@ i2c8: i2c-bus@340 { i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x380 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -634,7 +624,6 @@ i2c9: i2c-bus@380 { i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x3c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 { i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x400 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -668,7 +656,6 @@ i2c11: i2c-bus@400 { i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x440 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -685,7 +672,6 @@ i2c12: i2c-bus@440 { i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x480 0x40>; compatible = "aspeed,ast2400-i2c-bus"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index 04f98d1dbb97c..e6f3cf3c721e5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -363,6 +363,7 @@ sgpio: sgpio@1e780200 { interrupts = <40>; reg = <0x1e780200 0x0100>; clocks = <&syscon ASPEED_CLK_APB>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 { i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x40 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -610,7 +610,6 @@ i2c0: i2c-bus@40 { i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x80 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -626,7 +625,6 @@ i2c1: i2c-bus@80 { i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0xc0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 { i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x100 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -660,7 +657,6 @@ i2c3: i2c-bus@100 { i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x140 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -677,7 +673,6 @@ i2c4: i2c-bus@140 { i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x180 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -694,7 +689,6 @@ i2c5: i2c-bus@180 { i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x1c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 { i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x300 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -728,7 +721,6 @@ i2c7: i2c-bus@300 { i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x340 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -745,7 +737,6 @@ i2c8: i2c-bus@340 { i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x380 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -762,7 +753,6 @@ i2c9: i2c-bus@380 { i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x3c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 { i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x400 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -796,7 +785,6 @@ i2c11: i2c-bus@400 { i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x440 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -813,7 +801,6 @@ i2c12: i2c-bus@440 { i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>;
reg = <0x480 0x40>; compatible = "aspeed,ast2500-i2c-bus"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index c4d1faade8be3..29f94696d8b18 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -474,6 +474,7 @@ sgpiom0: sgpiom@1e780500 { reg = <0x1e780500 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -488,6 +489,7 @@ sgpiom1: sgpiom@1e780600 { reg = <0x1e780600 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -902,7 +904,6 @@ &i2c { i2c0: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -917,7 +918,6 @@ i2c0: i2c-bus@80 { i2c1: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -932,7 +932,6 @@ i2c1: i2c-bus@100 { i2c2: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -947,7 +946,6 @@ i2c2: i2c-bus@180 { i2c3: i2c-bus@200 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x200 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -962,7 +960,6 @@ i2c3: i2c-bus@200 { i2c4: i2c-bus@280 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x280 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -977,7 +974,6 @@ i2c4: i2c-bus@280 { i2c5: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -992,7 +988,6 @@ i2c5: i2c-bus@300 { i2c6: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 { i2c7: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 { i2c8: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 { i2c9: i2c-bus@500 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x500 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 { i2c10: i2c-bus@580 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x580 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 { i2c11: i2c-bus@600 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x600 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 { i2c12: i2c-bus@680 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x680 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 { i2c13: i2c-bus@700 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x700 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 { i2c14: i2c-bus@780 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x780 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 { i2c15: i2c-bus@800 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x800 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi index f9f79ed825181..07ca0d993c9fd 100644 --- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi @@ -167,6 +167,7 @@ gpio_crmu: gpio@3024800 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&mailbox>; interrupts = <0>; }; @@ -247,6 +248,7 @@ gpio_ccm: gpio@1800a000 { gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; + #interrupt-cells = <2>; };
i2c1: i2c@1800b000 { @@ -518,6 +520,7 @@ gpio_asiu: gpio@180a5000 { gpio-controller;
interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 42 1>, <&pinctrl 1 44 3>, diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi index 788a6806191a3..75545b10ef2fa 100644 --- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi @@ -200,6 +200,7 @@ gpiob: gpio@30000 { gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; };
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi index 9d20ba3b1ffb1..6a4482c931674 100644 --- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi @@ -180,6 +180,7 @@ gpioa: gpio@20 { gpio-controller; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 0 32>; }; @@ -352,6 +353,7 @@ gpiob: gpio@30000 { gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts index dffb9f84e67c5..c841eb8e7fb1d 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts @@ -65,6 +65,7 @@ i2c@11000 { gpio2: gpio-expander@20 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x20>;
@@ -79,6 +80,7 @@ gpio2: gpio-expander@20 { gpio3: gpio-expander@21 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x21>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi index fd671c7a1e5d6..6e1f0f164cb4f 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi @@ -120,6 +120,7 @@ gpio0: gpio@0 { interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; };
@@ -128,6 +129,7 @@ gpio1: gpio@1 { gpio-controller; #gpio-cells = <2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; };
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi index 1640763fd4af2..ff0d684622f74 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi @@ -997,7 +997,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi index 3b6fad273cabf..d38f1dd38a906 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi @@ -980,7 +980,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi index 4eb526fe9c558..81c8a5fd92cce 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi @@ -861,7 +861,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts index db8c332df6a1d..cad112e054758 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts @@ -227,7 +227,6 @@ bridge@1,0 {
#address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>;
bridge@2,1 { compatible = "pci10b5,8605"; @@ -235,7 +234,6 @@ bridge@2,1 {
#address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */ ethernet@3,0 { @@ -250,7 +248,6 @@ bridge@2,2 {
#address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */ switch_nic: ethernet@4,0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index 99f4f6ac71d4a..c1ae7c47b4422 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -245,6 +245,7 @@ pca9539: pca9539@74 { reg = <0x74>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; @@ -390,7 +391,6 @@ pci_root: root@0,0 {
#address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; }; };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index 4cc965277c521..dcb4f6a32f809 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -619,7 +619,6 @@ stmpe811@41 { blocks = <0x5>; id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; interrupt-parent = <&gpio4>; irq-trigger = <0x1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 11d9c7a2dacb1..6cc4d6fd5f28b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -543,7 +543,6 @@ stmpe811@41 { blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; - interrupt-controller; id = <0>; irq-trigger = <0x1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi index a63e73adc1fc5..42b2ba23aefc9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi @@ -225,7 +225,6 @@ da9063: pmic@58 { pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller;
onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi index 113974520d544..c0c47adc5866e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi @@ -124,6 +124,7 @@ pmic@58 { reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + #interrupt-cells = <2>; interrupt-controller;
regulators { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi index 86b4269e0e011..85e278eb20161 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi @@ -100,6 +100,7 @@ pmic: pmic@58 { interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 12361fcbe24af..1b965652291bf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -63,6 +63,7 @@ pca9554: io-expander@25 { gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; reg = <0x25>; };
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index 16b4e06c4efad..a248b8a453421 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -338,6 +338,7 @@ gpio6: io-expander@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts index 576235ec3c516..afa417b34b25f 100644 --- a/arch/arm/boot/dts/st/stm32429i-eval.dts +++ b/arch/arm/boot/dts/st/stm32429i-eval.dts @@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 { reg = <0x42>; interrupts = <8 3>; interrupt-parent = <&gpioi>; - interrupt-controller; wakeup-source;
stmpegpio: stmpe_gpio { diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts index 510cca5acb79c..7a701f7ef0c70 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts @@ -64,7 +64,6 @@ touchscreen@38 { reg = <0x38>; interrupts = <2 2>; interrupt-parent = <&gpiof>; - interrupt-controller; touchscreen-size-x = <480>; touchscreen-size-y = <800>; status = "okay"; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index 9a234dc1431d1..5b240769d300e 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -415,7 +415,6 @@ stmpe811@41 { reg = <0x41>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio2>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>;
From: Rob Herring robh@kernel.org
[ Upstream commit 91adecf911e5df78ea3e8f866e69db2c33416a5c ]
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled.
Signed-off-by: Rob Herring robh@kernel.org Reviewed-By: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com # Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Acked-by: Geert Uytterhoeven geert+renesas@glider.be Acked-by: Florian Fainelli florian.fainelli@broadcom.com #Broadcom Acked-by: Chanho Min chanho.min@lge.com Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-3-f2dee1292525@kernel.... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amazon/alpine-v2.dtsi | 1 - arch/arm64/boot/dts/amazon/alpine-v3.dtsi | 1 - arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 1 + arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 + arch/arm64/boot/dts/lg/lg1312.dtsi | 1 - arch/arm64/boot/dts/lg/lg1313.dtsi | 1 - arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 1 - arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 1 + arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 4 ++++ 9 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi index dccbba6e7f98e..dbf2dce8d1d68 100644 --- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi +++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi @@ -145,7 +145,6 @@ pci@fbc00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <160>; al,msi-num-spis = <160>; diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi index 39481d7fd7d4d..3ea178acdddfe 100644 --- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi +++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi @@ -355,7 +355,6 @@ pcie@fbd00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <336>; al,msi-num-spis = <959>; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 9dcd25ec2c041..896d1f33b5b61 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -586,6 +586,7 @@ gpio_g: gpio@660a0000 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>; };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index f049687d6b96d..d8516ec0dae74 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -450,6 +450,7 @@ gpio_hsls: gpio@d0000 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinmux 0 0 16>, <&pinmux 16 71 2>, diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 48ec4ebec0a83..b864ffa74ea8b 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -126,7 +126,6 @@ eth0: ethernet@c1b00000 { amba { #address-cells = <2>; #size-cells = <1>; - #interrupt-cells = <3>;
compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 3869460aa5dcb..996fb39bb50c1 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -126,7 +126,6 @@ eth0: ethernet@c3700000 { amba { #address-cells = <2>; #size-cells = <1>; - #interrupt-cells = <3>;
compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 2c920e22cec2b..7ec7c789d87ef 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -138,7 +138,6 @@ pmu {
odmi: odmi@300000 { compatible = "marvell,odmi-controller"; - interrupt-controller; msi-controller; marvell,odmi-frames = <4>; reg = <0x300000 0x4000>, diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index 5d635085fe3fd..9079e48aea23e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -128,6 +128,7 @@ mt6360: pmic@34 { compatible = "mediatek,mt6360"; reg = <0x34>; interrupt-controller; + #interrupt-cells = <1>; interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "IRQB";
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 3885ef3454ff6..50de17e4fb3f2 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -234,6 +234,7 @@ gpio_exp_74: gpio@74 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
@@ -294,6 +295,7 @@ gpio_exp_75: gpio@75 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; }; @@ -314,6 +316,7 @@ gpio_exp_76: gpio@76 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio7>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; }; @@ -324,6 +327,7 @@ gpio_exp_77: gpio@77 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio5>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; };
From: Rob Herring robh@kernel.org
[ Upstream commit f02b0f0dc26fbb77fe47b6e47cc5c211f0432c37 ]
The dtc interrupt_map warning is off because its dependency, interrupt_provider, is off by default. Fix all the warnings so it can be enabled.
Signed-off-by: Rob Herring robh@kernel.org Reviewed-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-4-f2dee1292525@kernel.... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts | 2 ++ .../boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 8 ++++---- 3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts index 4d70f6afd13ab..6d5e69035f94d 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts @@ -60,6 +60,8 @@ pci@c0000000 { * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts index 9ec0169bacf8c..5f4c849915db7 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts @@ -89,6 +89,8 @@ pci@c0000000 { * The slots have Ethernet, Ethernet, NEC and MPCI. * The IDSELs are 11, 12, 13, 14. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 11 - Ethernet A */ <0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */ diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index 5b86b4de1a1bd..f9ad5abfbd28b 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -345,10 +345,10 @@ pcie_rc: pcie@1c00000 { "msi8"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>, <&gcc GCC_PCIE_AUX_CLK>,
From: Rob Herring robh@kernel.org
[ Upstream commit 704dccec0d490f2ad06f3f16ebed254d81906c3a ]
The PCI node interrupt-map properties have the wrong size as #address-cells in the interrupt parent are not accounted for.
The dtc interrupt_map check catches this, but the warning is off because its dependency, interrupt_provider, is off by default.
Signed-off-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-5-f2dee1292525@kernel.... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 8 ++++---- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- 2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index fc907afe5174c..4294a5405c012 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -767,10 +767,10 @@ pcie0: pci@20000000 {
#interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 92fd924bbdbe5..5effd8180cc41 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -817,13 +817,13 @@ pcie1: pci@10000000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 + interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 + <0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 + <0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 + <0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, @@ -879,13 +879,13 @@ pcie0: pci@20000000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 + interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 + <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 + <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 + <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 8c987693dc2d292d777f1be63cb35233049ae25e ]
make dtbs_check W=2:
arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider ...
Fix this by adding the missing #interrupt-cells properties.
Reported-by: Rob Herring robh@kernel.org Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.170792246... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/renesas/r8a7790-lager.dts | 1 + arch/arm/boot/dts/renesas/r8a7790-stout.dts | 1 + arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 1 + arch/arm/boot/dts/renesas/r8a7791-porter.dts | 1 + arch/arm/boot/dts/renesas/r8a7792-blanche.dts | 1 + arch/arm/boot/dts/renesas/r8a7793-gose.dts | 1 + arch/arm/boot/dts/renesas/r8a7794-alt.dts | 1 + arch/arm/boot/dts/renesas/r8a7794-silk.dts | 1 + 8 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index 5ad5349a50dc9..ab7e9fa90b9fe 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -437,6 +437,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts index fe14727eefe1e..25956661a8754 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts @@ -332,6 +332,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index 26a40782cc899..4a76be68887b4 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -800,6 +800,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index ec0a20d5130d6..fcc9a2313e1df 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -389,6 +389,7 @@ pmic@5a { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
watchdog { compatible = "dlg,da9063-watchdog"; diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts index 6a83923aa4612..20963c9bbf0ad 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -330,6 +330,7 @@ pmic@58 { interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 79b537b246426..9358fc7d0e9f6 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -735,6 +735,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts index 4d93319674c6e..3a9db455ddec9 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts @@ -458,6 +458,7 @@ pmic@58 { interrupt-parent = <&gpio3>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts index b7af1befa126b..b825f2e25dd06 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts @@ -424,6 +424,7 @@ pmic@58 { interrupt-parent = <&gpio3>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>;
onkey { compatible = "dlg,da9063-onkey";
linux-stable-mirror@lists.linaro.org
-
Sasha Levin