From: Tadeusz Struk tstruk@gmail.com

commit 2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream.

When an invalid (non existing) handle is used in a TPM command, that uses the resource manager interface (/dev/tpmrm0) the resource manager tries to load it from its internal cache, but fails and the tpm_dev_transmit returns an -EINVAL error to the caller. The existing async handler doesn't handle these error cases currently and the condition in the poll handler never returns mask with EPOLLIN set. The result is that the poll call blocks and the application gets stuck until the user_read_timer wakes it up after 120 sec. Change the tpm_dev_async_work function to handle error conditions returned from tpm_dev_transmit they are also reflected in the poll mask and a correct error code could passed back to the caller.

Cc: Jarkko Sakkinen jarkko@kernel.org Cc: Jason Gunthorpe jgg@ziepe.ca Cc: linux-integrity@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org

Fixes: 9e1b74a63f77 ("tpm: add support for nonblocking operation") Tested-by: Jarkko Sakkinenjarkko@kernel.org Signed-off-by: Tadeusz Struk tstruk@gmail.com Reviewed-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Jarkko Sakkinen jarkko@kernel.org Cc: Tadeusz Struk tadeusz.struk@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/char/tpm/tpm-dev-common.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/char/tpm/tpm-dev-common.c +++ b/drivers/char/tpm/tpm-dev-common.c @@ -69,7 +69,13 @@ static void tpm_dev_async_work(struct wo ret = tpm_dev_transmit(priv->chip, priv->space, priv->data_buffer, sizeof(priv->data_buffer)); tpm_put_ops(priv->chip); - if (ret > 0) { + + /* + * If ret is > 0 then tpm_dev_transmit returned the size of the + * response. If ret is < 0 then tpm_dev_transmit failed and + * returned an error code. + */ + if (ret != 0) { priv->response_length = ret; mod_timer(&priv->user_read_timer, jiffies + (120 * HZ)); }

From: Eric Dumazet edumazet@google.com

commit 764f4eb6846f5475f1244767d24d25dd86528a4a upstream.

Whenever llc_ui_bind() and/or llc_ui_autobind() took a reference on a netdevice but subsequently fail, they must properly release their reference or risk the infamous message from unregister_netdevice() at device dismantle.

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: 赵子轩 beraphin@gmail.com Reported-by: Stoyan Manolov smanolov@suse.de Link: https://lore.kernel.org/r/20220323004147.1990845-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/llc/af_llc.c | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -311,6 +311,10 @@ static int llc_ui_autobind(struct socket sock_reset_flag(sk, SOCK_ZAPPED); rc = 0; out: + if (rc) { + dev_put_track(llc->dev, &llc->dev_tracker); + llc->dev = NULL; + } return rc; }

@@ -408,6 +412,10 @@ static int llc_ui_bind(struct socket *so out_put: llc_sap_put(sap); out: + if (rc) { + dev_put_track(llc->dev, &llc->dev_tracker); + llc->dev = NULL; + } release_sock(sk); return rc; }

From: Takashi Iwai tiwai@suse.de

commit efb6402c3c4a7c26d97c92d70186424097b6e366 upstream.

We've got syzbot reports hitting INT_MAX overflow at vmalloc() allocation that is called from snd_pcm_plug_alloc(). Although we apply the restrictions to input parameters, it's based only on the hw_params of the underlying PCM device. Since the PCM OSS layer allocates a temporary buffer for the data conversion, the size may become unexpectedly large when more channels or higher rates is given; in the reported case, it went over INT_MAX, hence it hits WARN_ON().

This patch is an attempt to avoid such an overflow and an allocation for too large buffers. First off, it adds the limit of 1MB as the upper bound for period bytes. This must be large enough for all use cases, and we really don't want to handle a larger temporary buffer than this size. The size check is performed at two places, where the original period bytes is calculated and where the plugin buffer size is calculated.

In addition, the driver uses array_size() and array3_size() for multiplications to catch overflows for the converted period size and buffer bytes.

Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com Suggested-by: Linus Torvalds torvalds@linux-foundation.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/oss/pcm_oss.c | 12 ++++++++---- sound/core/oss/pcm_plugin.c | 5 ++++- 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -774,6 +774,11 @@ static int snd_pcm_oss_period_size(struc

if (oss_period_size < 16) return -EINVAL; + + /* don't allocate too large period; 1MB period must be enough */ + if (oss_period_size > 1024 * 1024) + return -ENOMEM; + runtime->oss.period_bytes = oss_period_size; runtime->oss.period_frames = 1; runtime->oss.periods = oss_periods; @@ -1043,10 +1048,9 @@ static int snd_pcm_oss_change_params_loc goto failure; } #endif - oss_period_size *= oss_frame_size; - - oss_buffer_size = oss_period_size * runtime->oss.periods; - if (oss_buffer_size < 0) { + oss_period_size = array_size(oss_period_size, oss_frame_size); + oss_buffer_size = array_size(oss_period_size, runtime->oss.periods); + if (oss_buffer_size <= 0) { err = -EINVAL; goto failure; } --- a/sound/core/oss/pcm_plugin.c +++ b/sound/core/oss/pcm_plugin.c @@ -62,7 +62,10 @@ static int snd_pcm_plugin_alloc(struct s width = snd_pcm_format_physical_width(format->format); if (width < 0) return width; - size = frames * format->channels * width; + size = array3_size(frames, format->channels, width); + /* check for too large period size once again */ + if (size > 1024 * 1024) + return -ENOMEM; if (snd_BUG_ON(size % 8)) return -ENXIO; size /= 8;

From: Tim Crawford tcrawford@system76.com

commit 0c20fce13e6e111463e3a15ce3cf6713fe518388 upstream.

Fixes headset detection on Clevo NP70PNJ.

Signed-off-by: Tim Crawford tcrawford@system76.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220304170840.3351-1-tcrawford@system76.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9103,6 +9103,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x1558, 0x8561, "Clevo NH[57][0-9][ER][ACDH]Q", ALC269_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC), SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME), SND_PCI_QUIRK(0x1558, 0x8a20, "Clevo NH55DCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),

From: huangwenhui huangwenhuia@uniontech.com

commit 882bd07f564f97fca6e42ce6ce627ce24ce1ef5a upstream.

On a HP 288 Pro G8, the front mic could not be detected.In order to get it working, the pin configuration needs to be set correctly, and the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.

Signed-off-by: huangwenhui huangwenhuia@uniontech.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11069,6 +11069,7 @@ static const struct snd_pci_quirk alc662 SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), + SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50), SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50),

From: Takashi Iwai tiwai@suse.de

commit 92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream.

Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls.

This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity.

Reported-by: Hu Jiahui kirin.say@gmail.com Cc: stable@vger.kernel.org Reviewed-by: Jaroslav Kysela perex@perex.cz Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/sound/pcm.h | 1 sound/core/pcm.c | 2 + sound/core/pcm_native.c | 61 ++++++++++++++++++++++++++++++------------------ 3 files changed, 42 insertions(+), 22 deletions(-)

--- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -401,6 +401,7 @@ struct snd_pcm_runtime { wait_queue_head_t tsleep; /* transfer sleep */ struct fasync_struct *fasync; bool stop_operating; /* sync_stop will be called */ + struct mutex buffer_mutex; /* protect for buffer changes */

/* -- private section -- */ void *private_data; --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -969,6 +969,7 @@ int snd_pcm_attach_substream(struct snd_ init_waitqueue_head(&runtime->tsleep);

runtime->status->state = SNDRV_PCM_STATE_OPEN; + mutex_init(&runtime->buffer_mutex);

substream->runtime = runtime; substream->private_data = pcm->private_data; @@ -1002,6 +1003,7 @@ void snd_pcm_detach_substream(struct snd } else { substream->runtime = NULL; } + mutex_destroy(&runtime->buffer_mutex); kfree(runtime); put_pid(substream->pid); substream->pid = NULL; --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -685,33 +685,40 @@ static int snd_pcm_hw_params_choose(stru return 0; }

+#if IS_ENABLED(CONFIG_SND_PCM_OSS) +#define is_oss_stream(substream) ((substream)->oss.oss) +#else +#define is_oss_stream(substream) false +#endif + static int snd_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_pcm_runtime *runtime; - int err, usecs; + int err = 0, usecs; unsigned int bits; snd_pcm_uframes_t frames;

if (PCM_RUNTIME_CHECK(substream)) return -ENXIO; runtime = substream->runtime; + mutex_lock(&runtime->buffer_mutex); snd_pcm_stream_lock_irq(substream); switch (runtime->status->state) { case SNDRV_PCM_STATE_OPEN: case SNDRV_PCM_STATE_SETUP: case SNDRV_PCM_STATE_PREPARED: + if (!is_oss_stream(substream) && + atomic_read(&substream->mmap_count)) + err = -EBADFD; break; default: - snd_pcm_stream_unlock_irq(substream); - return -EBADFD; + err = -EBADFD; + break; } snd_pcm_stream_unlock_irq(substream); -#if IS_ENABLED(CONFIG_SND_PCM_OSS) - if (!substream->oss.oss) -#endif - if (atomic_read(&substream->mmap_count)) - return -EBADFD; + if (err) + goto unlock;

snd_pcm_sync_stop(substream, true);

@@ -799,16 +806,21 @@ static int snd_pcm_hw_params(struct snd_ if (usecs >= 0) cpu_latency_qos_add_request(&substream->latency_pm_qos_req, usecs); - return 0; + err = 0; _error: - /* hardware might be unusable from this time, - so we force application to retry to set - the correct hardware parameter settings */ - snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); - if (substream->ops->hw_free != NULL) - substream->ops->hw_free(substream); - if (substream->managed_buffer_alloc) - snd_pcm_lib_free_pages(substream); + if (err) { + /* hardware might be unusable from this time, + * so we force application to retry to set + * the correct hardware parameter settings + */ + snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); + if (substream->ops->hw_free != NULL) + substream->ops->hw_free(substream); + if (substream->managed_buffer_alloc) + snd_pcm_lib_free_pages(substream); + } + unlock: + mutex_unlock(&runtime->buffer_mutex); return err; }

@@ -848,26 +860,31 @@ static int do_hw_free(struct snd_pcm_sub static int snd_pcm_hw_free(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime; - int result; + int result = 0;

if (PCM_RUNTIME_CHECK(substream)) return -ENXIO; runtime = substream->runtime; + mutex_lock(&runtime->buffer_mutex); snd_pcm_stream_lock_irq(substream); switch (runtime->status->state) { case SNDRV_PCM_STATE_SETUP: case SNDRV_PCM_STATE_PREPARED: + if (atomic_read(&substream->mmap_count)) + result = -EBADFD; break; default: - snd_pcm_stream_unlock_irq(substream); - return -EBADFD; + result = -EBADFD; + break; } snd_pcm_stream_unlock_irq(substream); - if (atomic_read(&substream->mmap_count)) - return -EBADFD; + if (result) + goto unlock; result = do_hw_free(substream); snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); cpu_latency_qos_remove_request(&substream->latency_pm_qos_req); + unlock: + mutex_unlock(&runtime->buffer_mutex); return result; }

From: Takashi Iwai tiwai@suse.de

commit 3c3201f8c7bb77eb53b08a3ca8d9a4ddc500b4c0 upstream.

Like the previous fixes to hw_params and hw_free ioctl races, we need to paper over the concurrent prepare ioctl calls against hw_params and hw_free, too.

This patch implements the locking with the existing runtime->buffer_mutex for prepare ioctls. Unlike the previous case for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is performed to the linked streams, hence the lock can't be applied simply on the top. For tracking the lock in each linked substream, we modify snd_pcm_action_group() slightly and apply the buffer_mutex for the case stream_lock=false (formerly there was no lock applied) there.

Cc: stable@vger.kernel.org Reviewed-by: Jaroslav Kysela perex@perex.cz Link: https://lore.kernel.org/r/20220322170720.3529-4-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/pcm_native.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-)

--- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1190,15 +1190,17 @@ struct action_ops { static int snd_pcm_action_group(const struct action_ops *ops, struct snd_pcm_substream *substream, snd_pcm_state_t state, - bool do_lock) + bool stream_lock) { struct snd_pcm_substream *s = NULL; struct snd_pcm_substream *s1; int res = 0, depth = 1;

snd_pcm_group_for_each_entry(s, substream) { - if (do_lock && s != substream) { - if (s->pcm->nonatomic) + if (s != substream) { + if (!stream_lock) + mutex_lock_nested(&s->runtime->buffer_mutex, depth); + else if (s->pcm->nonatomic) mutex_lock_nested(&s->self_group.mutex, depth); else spin_lock_nested(&s->self_group.lock, depth); @@ -1226,18 +1228,18 @@ static int snd_pcm_action_group(const st ops->post_action(s, state); } _unlock: - if (do_lock) { - /* unlock streams */ - snd_pcm_group_for_each_entry(s1, substream) { - if (s1 != substream) { - if (s1->pcm->nonatomic) - mutex_unlock(&s1->self_group.mutex); - else - spin_unlock(&s1->self_group.lock); - } - if (s1 == s) /* end */ - break; + /* unlock streams */ + snd_pcm_group_for_each_entry(s1, substream) { + if (s1 != substream) { + if (!stream_lock) + mutex_unlock(&s1->runtime->buffer_mutex); + else if (s1->pcm->nonatomic) + mutex_unlock(&s1->self_group.mutex); + else + spin_unlock(&s1->self_group.lock); } + if (s1 == s) /* end */ + break; } return res; } @@ -1367,10 +1369,12 @@ static int snd_pcm_action_nonatomic(cons

/* Guarantee the group members won't change during non-atomic action */ down_read(&snd_pcm_link_rwsem); + mutex_lock(&substream->runtime->buffer_mutex); if (snd_pcm_stream_linked(substream)) res = snd_pcm_action_group(ops, substream, state, false); else res = snd_pcm_action_single(ops, substream, state); + mutex_unlock(&substream->runtime->buffer_mutex); up_read(&snd_pcm_link_rwsem); return res; }

From: Takashi Iwai tiwai@suse.de

commit 1f68915b2efd0d6bfd6e124aa63c94b3c69f127c upstream.

snd_pcm_reset() is a non-atomic operation, and it's allowed to run during the PCM stream running. It implies that the manipulation of hw_ptr and other parameters might be racy.

This patch adds the PCM stream lock at appropriate places in snd_pcm_*_reset() actions for covering that.

Cc: stable@vger.kernel.org Reviewed-by: Jaroslav Kysela perex@perex.cz Link: https://lore.kernel.org/r/20220322171325.4355-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/pcm_native.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1864,11 +1864,13 @@ static int snd_pcm_do_reset(struct snd_p int err = snd_pcm_ops_ioctl(substream, SNDRV_PCM_IOCTL1_RESET, NULL); if (err < 0) return err; + snd_pcm_stream_lock_irq(substream); runtime->hw_ptr_base = 0; runtime->hw_ptr_interrupt = runtime->status->hw_ptr - runtime->status->hw_ptr % runtime->period_size; runtime->silence_start = runtime->status->hw_ptr; runtime->silence_filled = 0; + snd_pcm_stream_unlock_irq(substream); return 0; }

@@ -1876,10 +1878,12 @@ static void snd_pcm_post_reset(struct sn snd_pcm_state_t state) { struct snd_pcm_runtime *runtime = substream->runtime; + snd_pcm_stream_lock_irq(substream); runtime->control->appl_ptr = runtime->status->hw_ptr; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) snd_pcm_playback_silence(substream, ULONG_MAX); + snd_pcm_stream_unlock_irq(substream); }

static const struct action_ops snd_pcm_action_reset = {

From: Jonathan Teh jonathan.teh@outlook.com

commit c14231cc04337c2c2a937db084af342ce704dbde upstream.

Save and restore CM_REG_AUX_VOL instead of register 0x24 twice on suspend/resume.

Tested on CMI8738LX.

Fixes: cb60e5f5b2b1 ("[ALSA] cmipci - Add PM support") Signed-off-by: Jonathan Teh jonathan.teh@outlook.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/DBAPR04MB7366CB3EA9C8521C35C56E8B920E9@DBAPR04MB73... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/cmipci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -298,7 +298,6 @@ MODULE_PARM_DESC(joystick_port, "Joystic #define CM_MICGAINZ 0x01 /* mic boost */ #define CM_MICGAINZ_SHIFT 0

-#define CM_REG_MIXER3 0x24 #define CM_REG_AUX_VOL 0x26 #define CM_VAUXL_MASK 0xf0 #define CM_VAUXR_MASK 0x0f @@ -3265,7 +3264,7 @@ static int snd_cmipci_probe(struct pci_d */ static const unsigned char saved_regs[] = { CM_REG_FUNCTRL1, CM_REG_CHFORMAT, CM_REG_LEGACY_CTRL, CM_REG_MISC_CTRL, - CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_MIXER3, CM_REG_PLL, + CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_AUX_VOL, CM_REG_PLL, CM_REG_CH0_FRAME1, CM_REG_CH0_FRAME2, CM_REG_CH1_FRAME1, CM_REG_CH1_FRAME2, CM_REG_EXT_MISC, CM_REG_INT_STATUS, CM_REG_INT_HLDCLR, CM_REG_FUNCTRL0,

From: Stephane Graber stgraber@ubuntu.com

commit e9e6faeafaa00da1851bcf47912b0f1acae666b4 upstream.

All packets on ingress (except for jumbo) are terminated with a 4-bytes CRC checksum. It's the responsability of the driver to strip those 4 bytes. Unfortunately a change dating back to March 2017 re-shuffled some code and made the CRC stripping code effectively dead.

This change re-orders that part a bit such that the datalen is immediately altered if needed.

Fixes: 4902a92270fb ("drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11") Cc: stable@vger.kernel.org Signed-off-by: Stephane Graber stgraber@ubuntu.com Tested-by: Stephane Graber stgraber@ubuntu.com Link: https://lore.kernel.org/r/20220322224205.752795-1-stgraber@ubuntu.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -696,6 +696,12 @@ static int xgene_enet_rx_frame(struct xg buf_pool->rx_skb[skb_index] = NULL;

datalen = xgene_enet_get_data_len(le64_to_cpu(raw_desc->m1)); + + /* strip off CRC as HW isn't doing this */ + nv = GET_VAL(NV, le64_to_cpu(raw_desc->m0)); + if (!nv) + datalen -= 4; + skb_put(skb, datalen); prefetch(skb->data - NET_IP_ALIGN); skb->protocol = eth_type_trans(skb, ndev); @@ -717,12 +723,8 @@ static int xgene_enet_rx_frame(struct xg } }

- nv = GET_VAL(NV, le64_to_cpu(raw_desc->m0)); - if (!nv) { - /* strip off CRC as HW isn't doing this */ - datalen -= 4; + if (!nv) goto skip_jumbo; - }

slots = page_pool->slots - 1; head = page_pool->head;

From: Pablo Neira Ayuso pablo@netfilter.org

commit 6e1acfa387b9ff82cfc7db8cc3b6959221a95851 upstream.

Bail out in case userspace uses unsupported registers.

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/netfilter/nf_tables_api.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9275,17 +9275,23 @@ int nft_parse_u32_check(const struct nla } EXPORT_SYMBOL_GPL(nft_parse_u32_check);

-static unsigned int nft_parse_register(const struct nlattr *attr) +static unsigned int nft_parse_register(const struct nlattr *attr, u32 *preg) { unsigned int reg;

reg = ntohl(nla_get_be32(attr)); switch (reg) { case NFT_REG_VERDICT...NFT_REG_4: - return reg * NFT_REG_SIZE / NFT_REG32_SIZE; + *preg = reg * NFT_REG_SIZE / NFT_REG32_SIZE; + break; + case NFT_REG32_00...NFT_REG32_15: + *preg = reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00; + break; default: - return reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00; + return -ERANGE; } + + return 0; }

/** @@ -9327,7 +9333,10 @@ int nft_parse_register_load(const struct u32 reg; int err;

- reg = nft_parse_register(attr); + err = nft_parse_register(attr, &reg); + if (err < 0) + return err; + err = nft_validate_register_load(reg, len); if (err < 0) return err; @@ -9382,7 +9391,10 @@ int nft_parse_register_store(const struc int err; u32 reg;

- reg = nft_parse_register(attr); + err = nft_parse_register(attr, &reg); + if (err < 0) + return err; + err = nft_validate_register_store(ctx, reg, data, type, len); if (err < 0) return err;

From: Maximilian Luz luzmaximilian@gmail.com

commit 7dacee0b9efc8bd061f097b1a8d4daa6591af0c6 upstream.

For some reason, the Microsoft Surface Go 3 uses the standard ACPI interface for battery information, but does not use the standard PNP0C0A HID. Instead it uses MSHW0146 as identifier. Add that ID to the driver as this seems to work well.

Additionally, the power state is not updated immediately after the AC has been (un-)plugged, so add the respective quirk for that.

Signed-off-by: Maximilian Luz luzmaximilian@gmail.com Cc: All applicable stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/acpi/battery.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

--- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -59,6 +59,10 @@ MODULE_PARM_DESC(cache_time, "cache time

static const struct acpi_device_id battery_device_ids[] = { {"PNP0C0A", 0}, + + /* Microsoft Surface Go 3 */ + {"MSHW0146", 0}, + {"", 0}, };

@@ -1148,6 +1152,14 @@ static const struct dmi_system_id bat_dm DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"), }, }, + { + /* Microsoft Surface Go 3 */ + .callback = battery_notification_delay_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), + }, + }, {}, };

From: Giovanni Cabiddu giovanni.cabiddu@intel.com

commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream.

The implementations of aead and skcipher in the QAT driver do not support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver returns -EBUSY but does not enqueue the request. This can result in applications like dm-crypt waiting indefinitely for a completion of a request that was never submitted to the hardware.

To avoid this problem, disable the registration of all crypto algorithms in the QAT driver by setting the number of crypto instances to 0 at configuration time.

Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu giovanni.cabiddu@intel.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/crypto/qat/qat_4xxx/adf_drv.c | 7 +++++++ drivers/crypto/qat/qat_common/qat_crypto.c | 7 +++++++ 2 files changed, 14 insertions(+)

--- a/drivers/crypto/qat/qat_4xxx/adf_drv.c +++ b/drivers/crypto/qat/qat_4xxx/adf_drv.c @@ -75,6 +75,13 @@ static int adf_crypto_dev_config(struct if (ret) goto err;

+ /* Temporarily set the number of crypto instances to zero to avoid + * registering the crypto algorithms. + * This will be removed when the algorithms will support the + * CRYPTO_TFM_REQ_MAY_BACKLOG flag + */ + instances = 0; + for (i = 0; i < instances; i++) { val = i; bank = i * 2; --- a/drivers/crypto/qat/qat_common/qat_crypto.c +++ b/drivers/crypto/qat/qat_common/qat_crypto.c @@ -161,6 +161,13 @@ int qat_crypto_dev_config(struct adf_acc if (ret) goto err;

+ /* Temporarily set the number of crypto instances to zero to avoid + * registering the crypto algorithms. + * This will be removed when the algorithms will support the + * CRYPTO_TFM_REQ_MAY_BACKLOG flag + */ + instances = 0; + for (i = 0; i < instances; i++) { val = i; snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_BANK_NUM, i);

From: Ismael Ferreras Morezuelas swyterzone@gmail.com

commit 0eaecfb2e4814d51ab172df3823e35d7c488b6d2 upstream.

Some controllers have problems with being sent a command to clear all filtering. While the HCI code does not unconditionally send a clear-all anymore at BR/EDR setup (after the state machine refactor), there might be more ways of hitting these codepaths in the future as the kernel develops.

Cc: stable@vger.kernel.org Cc: Hans de Goede hdegoede@redhat.com Signed-off-by: Ismael Ferreras Morezuelas swyterzone@gmail.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/bluetooth/hci.h | 10 ++++++++++ net/bluetooth/hci_sync.c | 16 ++++++++++++++++ 2 files changed, 26 insertions(+)

--- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -255,6 +255,16 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, + + /* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with + * HCI_FLT_CLEAR_ALL are ignored and event filtering is + * completely avoided. A subset of the CSR controller + * clones struggle with this and instantly lock up. + * + * Note that devices using this must (separately) disable + * runtime suspend, because event filtering takes place there. + */ + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, };

/* HCI device flags */ --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -2806,6 +2806,9 @@ static int hci_set_event_filter_sync(str if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return 0;

+ if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return 0; + memset(&cp, 0, sizeof(cp)); cp.flt_type = flt_type;

@@ -2826,6 +2829,13 @@ static int hci_clear_event_filter_sync(s if (!hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) return 0;

+ /* In theory the state machine should not reach here unless + * a hci_set_event_filter_sync() call succeeds, but we do + * the check both for parity and as a future reminder. + */ + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return 0; + return hci_set_event_filter_sync(hdev, HCI_FLT_CLEAR_ALL, 0x00, BDADDR_ANY, 0x00); } @@ -4825,6 +4835,12 @@ static int hci_update_event_filter_sync( if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return 0;

+ /* Some fake CSR controllers lock up after setting this type of + * filter, so avoid sending the request altogether. + */ + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return 0; + /* Always clear event filter when starting */ hci_clear_event_filter_sync(hdev);

From: Brian Norris briannorris@chromium.org

commit 1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream.

This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.

Users are reporting regressions in regulatory domain detection and channel availability.

The problem this was trying to resolve was fixed in firmware anyway:

QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042 https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc6...

Link: https://bbs.archlinux.org/viewtopic.php?id=254535 Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/ Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain") Cc: stable@vger.kernel.org Cc: Wen Gong wgong@codeaurora.org Signed-off-by: Brian Norris briannorris@chromium.org Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/regd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -667,14 +667,14 @@ ath_regd_init_wiphy(struct ath_regulator

/* * Some users have reported their EEPROM programmed with - * 0x8000 or 0x0 set, this is not a supported regulatory - * domain but since we have more than one user with it we - * need a solution for them. We default to 0x64, which is - * the default Atheros world regulatory domain. + * 0x8000 set, this is not a supported regulatory domain + * but since we have more than one user with it we need + * a solution for them. We default to 0x64, which is the + * default Atheros world regulatory domain. */ static void ath_regd_sanitize(struct ath_regulatory *reg) { - if (reg->current_rd != COUNTRY_ERD_FLAG && reg->current_rd != 0) + if (reg->current_rd != COUNTRY_ERD_FLAG) return; printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n"); reg->current_rd = 0x64;

From: Ritesh Harjani riteshh@linux.ibm.com

commit cc16eecae687912238ee6efbff71ad31e2bc414e upstream.

jbd2_journal_wait_updates() is called with j_state_lock held. But if there is a commit in progress, then this transaction might get committed and freed via jbd2_journal_commit_transaction() -> jbd2_journal_free_transaction(), when we release j_state_lock. So check for journal->j_running_transaction everytime we release and acquire j_state_lock to avoid use-after-free issue.

Link: https://lore.kernel.org/r/948c2fed518ae739db6a8f7f83f1d58b504f87d0.164449710... Fixes: 4f98186848707f53 ("jbd2: refactor wait logic for transaction updates into a common function") Cc: stable@kernel.org Reported-and-tested-by: syzbot+afa2ca5171d93e44b348@syzkaller.appspotmail.com Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Ritesh Harjani riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/jbd2/transaction.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-)

--- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -842,27 +842,38 @@ EXPORT_SYMBOL(jbd2_journal_restart); */ void jbd2_journal_wait_updates(journal_t *journal) { - transaction_t *commit_transaction = journal->j_running_transaction; + DEFINE_WAIT(wait);

- if (!commit_transaction) - return; + while (1) { + /* + * Note that the running transaction can get freed under us if + * this transaction is getting committed in + * jbd2_journal_commit_transaction() -> + * jbd2_journal_free_transaction(). This can only happen when we + * release j_state_lock -> schedule() -> acquire j_state_lock. + * Hence we should everytime retrieve new j_running_transaction + * value (after j_state_lock release acquire cycle), else it may + * lead to use-after-free of old freed transaction. + */ + transaction_t *transaction = journal->j_running_transaction;

- spin_lock(&commit_transaction->t_handle_lock); - while (atomic_read(&commit_transaction->t_updates)) { - DEFINE_WAIT(wait); + if (!transaction) + break;

+ spin_lock(&transaction->t_handle_lock); prepare_to_wait(&journal->j_wait_updates, &wait, - TASK_UNINTERRUPTIBLE); - if (atomic_read(&commit_transaction->t_updates)) { - spin_unlock(&commit_transaction->t_handle_lock); - write_unlock(&journal->j_state_lock); - schedule(); - write_lock(&journal->j_state_lock); - spin_lock(&commit_transaction->t_handle_lock); + TASK_UNINTERRUPTIBLE); + if (!atomic_read(&transaction->t_updates)) { + spin_unlock(&transaction->t_handle_lock); + finish_wait(&journal->j_wait_updates, &wait); + break; } + spin_unlock(&transaction->t_handle_lock); + write_unlock(&journal->j_state_lock); + schedule(); finish_wait(&journal->j_wait_updates, &wait); + write_lock(&journal->j_state_lock); } - spin_unlock(&commit_transaction->t_handle_lock); }

/** @@ -877,8 +888,6 @@ void jbd2_journal_wait_updates(journal_t */ void jbd2_journal_lock_updates(journal_t *journal) { - DEFINE_WAIT(wait); - jbd2_might_wait_for_commit(journal);

write_lock(&journal->j_state_lock);

From: Arnd Bergmann arnd@arndb.de

commit 222ca305c9fd39e5ed8104da25c09b2b79a516a8 upstream.

Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not.

Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison.

Cc: stable@vger.kernel.org Fixes: da551281947c ("csky: User access") Fixes: f663b60f5215 ("microblaze: Fix uaccess_ok macro") Fixes: 7567746e1c0d ("Hexagon: Add user access functions") Reported-by: David Laight David.Laight@aculab.com Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/csky/include/asm/uaccess.h | 7 +++---- arch/hexagon/include/asm/uaccess.h | 18 +++++++++--------- arch/microblaze/include/asm/uaccess.h | 19 ++++--------------- 3 files changed, 16 insertions(+), 28 deletions(-)

--- a/arch/csky/include/asm/uaccess.h +++ b/arch/csky/include/asm/uaccess.h @@ -3,14 +3,13 @@ #ifndef __ASM_CSKY_UACCESS_H #define __ASM_CSKY_UACCESS_H

-#define user_addr_max() \ - (uaccess_kernel() ? KERNEL_DS.seg : get_fs().seg) +#define user_addr_max() (current_thread_info()->addr_limit.seg)

static inline int __access_ok(unsigned long addr, unsigned long size) { - unsigned long limit = current_thread_info()->addr_limit.seg; + unsigned long limit = user_addr_max();

- return ((addr < limit) && ((addr + size) < limit)); + return (size <= limit) && (addr <= (limit - size)); } #define __access_ok __access_ok

--- a/arch/hexagon/include/asm/uaccess.h +++ b/arch/hexagon/include/asm/uaccess.h @@ -25,17 +25,17 @@ * Returns true (nonzero) if the memory block *may* be valid, false (zero) * if it is definitely invalid. * - * User address space in Hexagon, like x86, goes to 0xbfffffff, so the - * simple MSB-based tests used by MIPS won't work. Some further - * optimization is probably possible here, but for now, keep it - * reasonably simple and not *too* slow. After all, we've got the - * MMU for backup. */ +#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg) +#define user_addr_max() (uaccess_kernel() ? ~0UL : TASK_SIZE)

-#define __access_ok(addr, size) \ - ((get_fs().seg == KERNEL_DS.seg) || \ - (((unsigned long)addr < get_fs().seg) && \ - (unsigned long)size < (get_fs().seg - (unsigned long)addr))) +static inline int __access_ok(unsigned long addr, unsigned long size) +{ + unsigned long limit = TASK_SIZE; + + return (size <= limit) && (addr <= (limit - size)); +} +#define __access_ok __access_ok

/* * When a kernel-mode page fault is taken, the faulting instruction --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -39,24 +39,13 @@

# define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)

-static inline int access_ok(const void __user *addr, unsigned long size) +static inline int __access_ok(unsigned long addr, unsigned long size) { - if (!size) - goto ok; + unsigned long limit = user_addr_max();

- if ((get_fs().seg < ((unsigned long)addr)) || - (get_fs().seg < ((unsigned long)addr + size - 1))) { - pr_devel("ACCESS fail at 0x%08x (size 0x%x), seg 0x%08x\n", - (__force u32)addr, (u32)size, - (u32)get_fs().seg); - return 0; - } -ok: - pr_devel("ACCESS OK at 0x%08x (size 0x%x), seg 0x%08x\n", - (__force u32)addr, (u32)size, - (u32)get_fs().seg); - return 1; + return (size <= limit) && (addr <= (limit - size)); } +#define access_ok(addr, size) __access_ok((unsigned long)addr, size)

# define __FIXUP_SECTION ".section .fixup,"ax"\n" # define __EX_TABLE_SECTION ".section __ex_table,"a"\n"

From: Lino Sanfilippo LinoSanfilippo@gmx.de

commit 7e0438f83dc769465ee663bb5dcf8cc154940712 upstream.

The following sequence of operations results in a refcount warning:

1. Open device /dev/tpmrm. 2. Remove module tpm_tis_spi. 3. Write a TPM command to the file descriptor opened at step 1.

------------[ cut here ]------------ WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4 refcount_t: addition on 0; use-after-free. Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4 brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835] CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2 Hardware name: BCM2711 [<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14) [<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8) [<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108) [<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8) [<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4) [<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm]) [<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm]) [<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0) [<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc) [<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c) Exception stack(0xc226bfa8 to 0xc226bff0) bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000 bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684 bfe0: 0000006c beafe648 0001056c b6eb6944 ---[ end trace d4b8409def9b8b1f ]---

The reason for this warning is the attempt to get the chip->dev reference in tpm_common_write() although the reference counter is already zero.

Since commit 8979b02aaf1d ("tpm: Fix reference count to main device") the extra reference used to prevent a premature zero counter is never taken, because the required TPM_CHIP_FLAG_TPM2 flag is never set.

Fix this by moving the TPM 2 character device handling from tpm_chip_alloc() to tpm_add_char_device() which is called at a later point in time when the flag has been set in case of TPM2.

Commit fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>") already introduced function tpm_devs_release() to release the extra reference but did not implement the required put on chip->devs that results in the call of this function.

Fix this by putting chip->devs in tpm_chip_unregister().

Finally move the new implementation for the TPM 2 handling into a new function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the good case and error cases.

Cc: stable@vger.kernel.org Fixes: fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>") Fixes: 8979b02aaf1d ("tpm: Fix reference count to main device") Co-developed-by: Jason Gunthorpe jgg@ziepe.ca Signed-off-by: Jason Gunthorpe jgg@ziepe.ca Signed-off-by: Lino Sanfilippo LinoSanfilippo@gmx.de Tested-by: Stefan Berger stefanb@linux.ibm.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Reviewed-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/char/tpm/tpm-chip.c | 46 +++++------------------------ drivers/char/tpm/tpm.h | 2 + drivers/char/tpm/tpm2-space.c | 65 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 75 insertions(+), 38 deletions(-)

--- a/drivers/char/tpm/tpm-chip.c +++ b/drivers/char/tpm/tpm-chip.c @@ -274,14 +274,6 @@ static void tpm_dev_release(struct devic kfree(chip); }

-static void tpm_devs_release(struct device *dev) -{ - struct tpm_chip *chip = container_of(dev, struct tpm_chip, devs); - - /* release the master device reference */ - put_device(&chip->dev); -} - /** * tpm_class_shutdown() - prepare the TPM device for loss of power. * @dev: device to which the chip is associated. @@ -344,7 +336,6 @@ struct tpm_chip *tpm_chip_alloc(struct d chip->dev_num = rc;

device_initialize(&chip->dev); - device_initialize(&chip->devs);

chip->dev.class = tpm_class; chip->dev.class->shutdown_pre = tpm_class_shutdown; @@ -352,39 +343,20 @@ struct tpm_chip *tpm_chip_alloc(struct d chip->dev.parent = pdev; chip->dev.groups = chip->groups;

- chip->devs.parent = pdev; - chip->devs.class = tpmrm_class; - chip->devs.release = tpm_devs_release; - /* get extra reference on main device to hold on - * behalf of devs. This holds the chip structure - * while cdevs is in use. The corresponding put - * is in the tpm_devs_release (TPM2 only) - */ - if (chip->flags & TPM_CHIP_FLAG_TPM2) - get_device(&chip->dev); - if (chip->dev_num == 0) chip->dev.devt = MKDEV(MISC_MAJOR, TPM_MINOR); else chip->dev.devt = MKDEV(MAJOR(tpm_devt), chip->dev_num);

- chip->devs.devt = - MKDEV(MAJOR(tpm_devt), chip->dev_num + TPM_NUM_DEVICES); - rc = dev_set_name(&chip->dev, "tpm%d", chip->dev_num); if (rc) goto out; - rc = dev_set_name(&chip->devs, "tpmrm%d", chip->dev_num); - if (rc) - goto out;

if (!pdev) chip->flags |= TPM_CHIP_FLAG_VIRTUAL;

cdev_init(&chip->cdev, &tpm_fops); - cdev_init(&chip->cdevs, &tpmrm_fops); chip->cdev.owner = THIS_MODULE; - chip->cdevs.owner = THIS_MODULE;

rc = tpm2_init_space(&chip->work_space, TPM2_SPACE_BUFFER_SIZE); if (rc) { @@ -396,7 +368,6 @@ struct tpm_chip *tpm_chip_alloc(struct d return chip;

out: - put_device(&chip->devs); put_device(&chip->dev); return ERR_PTR(rc); } @@ -445,14 +416,9 @@ static int tpm_add_char_device(struct tp }

if (chip->flags & TPM_CHIP_FLAG_TPM2 && !tpm_is_firmware_upgrade(chip)) { - rc = cdev_device_add(&chip->cdevs, &chip->devs); - if (rc) { - dev_err(&chip->devs, - "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n", - dev_name(&chip->devs), MAJOR(chip->devs.devt), - MINOR(chip->devs.devt), rc); - return rc; - } + rc = tpm_devs_add(chip); + if (rc) + goto err_del_cdev; }

/* Make the chip available. */ @@ -460,6 +426,10 @@ static int tpm_add_char_device(struct tp idr_replace(&dev_nums_idr, chip, chip->dev_num); mutex_unlock(&idr_lock);

+ return 0; + +err_del_cdev: + cdev_device_del(&chip->cdev, &chip->dev); return rc; }

@@ -654,7 +624,7 @@ void tpm_chip_unregister(struct tpm_chip hwrng_unregister(&chip->hwrng); tpm_bios_log_teardown(chip); if (chip->flags & TPM_CHIP_FLAG_TPM2 && !tpm_is_firmware_upgrade(chip)) - cdev_device_del(&chip->cdevs, &chip->devs); + tpm_devs_remove(chip); tpm_del_char_device(chip); } EXPORT_SYMBOL_GPL(tpm_chip_unregister); --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -234,6 +234,8 @@ int tpm2_prepare_space(struct tpm_chip * size_t cmdsiz); int tpm2_commit_space(struct tpm_chip *chip, struct tpm_space *space, void *buf, size_t *bufsiz); +int tpm_devs_add(struct tpm_chip *chip); +void tpm_devs_remove(struct tpm_chip *chip);

void tpm_bios_log_setup(struct tpm_chip *chip); void tpm_bios_log_teardown(struct tpm_chip *chip); --- a/drivers/char/tpm/tpm2-space.c +++ b/drivers/char/tpm/tpm2-space.c @@ -574,3 +574,68 @@ out: dev_err(&chip->dev, "%s: error %d\n", __func__, rc); return rc; } + +/* + * Put the reference to the main device. + */ +static void tpm_devs_release(struct device *dev) +{ + struct tpm_chip *chip = container_of(dev, struct tpm_chip, devs); + + /* release the master device reference */ + put_device(&chip->dev); +} + +/* + * Remove the device file for exposed TPM spaces and release the device + * reference. This may also release the reference to the master device. + */ +void tpm_devs_remove(struct tpm_chip *chip) +{ + cdev_device_del(&chip->cdevs, &chip->devs); + put_device(&chip->devs); +} + +/* + * Add a device file to expose TPM spaces. Also take a reference to the + * main device. + */ +int tpm_devs_add(struct tpm_chip *chip) +{ + int rc; + + device_initialize(&chip->devs); + chip->devs.parent = chip->dev.parent; + chip->devs.class = tpmrm_class; + + /* + * Get extra reference on main device to hold on behalf of devs. + * This holds the chip structure while cdevs is in use. The + * corresponding put is in the tpm_devs_release. + */ + get_device(&chip->dev); + chip->devs.release = tpm_devs_release; + chip->devs.devt = MKDEV(MAJOR(tpm_devt), chip->dev_num + TPM_NUM_DEVICES); + cdev_init(&chip->cdevs, &tpmrm_fops); + chip->cdevs.owner = THIS_MODULE; + + rc = dev_set_name(&chip->devs, "tpmrm%d", chip->dev_num); + if (rc) + goto err_put_devs; + + rc = cdev_device_add(&chip->cdevs, &chip->devs); + if (rc) { + dev_err(&chip->devs, + "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n", + dev_name(&chip->devs), MAJOR(chip->devs.devt), + MINOR(chip->devs.devt), rc); + goto err_put_devs; + } + + return 0; + +err_put_devs: + put_device(&chip->devs); + + return rc; +}

From: Bryan O'Donoghue bryan.odonoghue@linaro.org

commit 98d504a82cc75840bec8e3c6ae0e4f411921962b upstream.

The spread of capability between the three WiFi silicon parts wcn36xx supports is:

wcn3620 - 802.11 a/b/g wcn3660 - 802.11 a/b/g/n wcn3680 - 802.11 a/b/g/n/ac

We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels. Fix this regression by ensuring we differentiate between all three parts.

Fixes: 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Reviewed-by: Loic Poulain loic.poulain@linaro.org Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/wcn36xx/main.c | 3 +++ drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 + 2 files changed, 4 insertions(+)

--- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1513,6 +1513,9 @@ static int wcn36xx_platform_get_resource if (iris_node) { if (of_device_is_compatible(iris_node, "qcom,wcn3620")) wcn->rf_id = RF_IRIS_WCN3620; + if (of_device_is_compatible(iris_node, "qcom,wcn3660") || + of_device_is_compatible(iris_node, "qcom,wcn3660b")) + wcn->rf_id = RF_IRIS_WCN3660; if (of_device_is_compatible(iris_node, "qcom,wcn3680")) wcn->rf_id = RF_IRIS_WCN3680; of_node_put(iris_node); --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h @@ -97,6 +97,7 @@ enum wcn36xx_ampdu_state {

#define RF_UNKNOWN 0x0000 #define RF_IRIS_WCN3620 0x3620 +#define RF_IRIS_WCN3660 0x3660 #define RF_IRIS_WCN3680 0x3680

static inline void buff_to_be(u32 *buf, size_t len)

From: Arnd Bergmann arnd@arndb.de

commit 8926d88ced46700bf6117ceaf391480b943ea9f4 upstream.

The get_user()/put_user() functions are meant to check for access_ok(), while the __get_user()/__put_user() functions don't.

This broke in 4.19 for nds32, when it gained an extraneous check in __get_user(), but lost the check it needs in __put_user().

Fixes: 487913ab18c2 ("nds32: Extract the checking and getting pointer to a macro") Cc: stable@vger.kernel.org @ v4.19+ Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/nds32/include/asm/uaccess.h | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/arch/nds32/include/asm/uaccess.h +++ b/arch/nds32/include/asm/uaccess.h @@ -70,9 +70,7 @@ static inline void set_fs(mm_segment_t f * versions are void (ie, don't return a value as such). */

-#define get_user __get_user \ - -#define __get_user(x, ptr) \ +#define get_user(x, ptr) \ ({ \ long __gu_err = 0; \ __get_user_check((x), (ptr), __gu_err); \ @@ -85,6 +83,14 @@ static inline void set_fs(mm_segment_t f (void)0; \ })

+#define __get_user(x, ptr) \ +({ \ + long __gu_err = 0; \ + const __typeof__(*(ptr)) __user *__p = (ptr); \ + __get_user_err((x), __p, (__gu_err)); \ + __gu_err; \ +}) + #define __get_user_check(x, ptr, err) \ ({ \ const __typeof__(*(ptr)) __user *__p = (ptr); \ @@ -165,12 +171,18 @@ do { \ : "r"(addr), "i"(-EFAULT) \ : "cc")

-#define put_user __put_user \ +#define put_user(x, ptr) \ +({ \ + long __pu_err = 0; \ + __put_user_check((x), (ptr), __pu_err); \ + __pu_err; \ +})

#define __put_user(x, ptr) \ ({ \ long __pu_err = 0; \ - __put_user_err((x), (ptr), __pu_err); \ + __typeof__(*(ptr)) __user *__p = (ptr); \ + __put_user_err((x), __p, __pu_err); \ __pu_err; \ })