From: Ulf Hansson ulf.hansson@linaro.org

[ Upstream commit 43cc64e5221cc6741252b64bc4531dd1eefb733d ]

The busy timeout that is computed for each erase/trim/discard operation, can become quite long and may thus exceed the host->max_busy_timeout. If that becomes the case, mmc_do_erase() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection.

However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other.

Suggested-by: Sowjanya Komatineni skomatineni@nvidia.com Cc: stable@vger.kernel.org Tested-by: Anders Roxell anders.roxell@linaro.org Tested-by: Sowjanya Komatineni skomatineni@nvidia.com Tested-by: Faiz Abbas faiz_abbas@ti.com Tested-By: Peter Geis pgwipeout@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/core/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index abf8f5eb0a1c8..26644b7ec13e3 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1732,8 +1732,11 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, * the erase operation does not exceed the max_busy_timeout, we should * use R1B response. Or we need to prevent the host from doing hw busy * detection, which is done by converting to a R1 response instead. + * Note, some hosts requires R1B, which also means they are on their own + * when it comes to deal with the busy timeout. */ - if (card->host->max_busy_timeout && + if (!(card->host->caps & MMC_CAP_NEED_RSP_BUSY) && + card->host->max_busy_timeout && busy_timeout > card->host->max_busy_timeout) { cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; } else {

From: Ulf Hansson ulf.hansson@linaro.org

[ Upstream commit 055e04830d4544c57f2a5192a26c9e25915c29c0 ]

It has turned out that the sdhci-omap controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support.

Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY.

Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Reported-by: Anders Roxell anders.roxell@linaro.org Reported-by: Faiz Abbas faiz_abbas@ti.com Cc: stable@vger.kernel.org Tested-by: Anders Roxell anders.roxell@linaro.org Tested-by: Faiz Abbas faiz_abbas@ti.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-omap.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index 083e7e053c954..d3135249b2e40 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -1134,6 +1134,9 @@ static int sdhci_omap_probe(struct platform_device *pdev) host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning; host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;

+ /* R1B responses is required to properly manage HW busy detection. */ + mmc->caps |= MMC_CAP_NEED_RSP_BUSY; + ret = sdhci_setup_host(host); if (ret) goto err_put_sync;

From: Jason A. Donenfeld Jason@zx2c4.com

commit 72c7943792c9e7788ddd182337bcf8f650cf56f5 upstream.

When this was originally ported, the 12-byte nonce vectors were left out to keep things simple. I agree that we don't need nor want a library interface for 12-byte nonces. But these test vectors were specially crafted to look at issues in the underlying primitives and related interactions. Therefore, we actually want to keep around all of the test vectors, and simply have a helper function to test them with.

Secondly, the sglist-based chunking code in the library interface is rather complicated, so this adds a developer-only test for ensuring that all the book keeping is correct, across a wide array of possibilities.

Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- lib/crypto/chacha20poly1305-selftest.c | 1712 ++++++++++++++++++++++++++++++++- 1 file changed, 1698 insertions(+), 14 deletions(-)

--- a/lib/crypto/chacha20poly1305-selftest.c +++ b/lib/crypto/chacha20poly1305-selftest.c @@ -4,6 +4,7 @@ */

#include <crypto/chacha20poly1305.h> +#include <crypto/chacha.h> #include <crypto/poly1305.h>

#include <asm/unaligned.h> @@ -1926,6 +1927,1104 @@ static const u8 enc_key012[] __initconst 0x65, 0x91, 0x6e, 0x2a, 0x79, 0x22, 0xda, 0x64 };

+/* wycheproof - rfc7539 */ +static const u8 enc_input013[] __initconst = { + 0x4c, 0x61, 0x64, 0x69, 0x65, 0x73, 0x20, 0x61, + 0x6e, 0x64, 0x20, 0x47, 0x65, 0x6e, 0x74, 0x6c, + 0x65, 0x6d, 0x65, 0x6e, 0x20, 0x6f, 0x66, 0x20, + 0x74, 0x68, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73, + 0x73, 0x20, 0x6f, 0x66, 0x20, 0x27, 0x39, 0x39, + 0x3a, 0x20, 0x49, 0x66, 0x20, 0x49, 0x20, 0x63, + 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x6f, 0x66, 0x66, + 0x65, 0x72, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6f, + 0x6e, 0x6c, 0x79, 0x20, 0x6f, 0x6e, 0x65, 0x20, + 0x74, 0x69, 0x70, 0x20, 0x66, 0x6f, 0x72, 0x20, + 0x74, 0x68, 0x65, 0x20, 0x66, 0x75, 0x74, 0x75, + 0x72, 0x65, 0x2c, 0x20, 0x73, 0x75, 0x6e, 0x73, + 0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f, + 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, + 0x74, 0x2e +}; +static const u8 enc_output013[] __initconst = { + 0xd3, 0x1a, 0x8d, 0x34, 0x64, 0x8e, 0x60, 0xdb, + 0x7b, 0x86, 0xaf, 0xbc, 0x53, 0xef, 0x7e, 0xc2, + 0xa4, 0xad, 0xed, 0x51, 0x29, 0x6e, 0x08, 0xfe, + 0xa9, 0xe2, 0xb5, 0xa7, 0x36, 0xee, 0x62, 0xd6, + 0x3d, 0xbe, 0xa4, 0x5e, 0x8c, 0xa9, 0x67, 0x12, + 0x82, 0xfa, 0xfb, 0x69, 0xda, 0x92, 0x72, 0x8b, + 0x1a, 0x71, 0xde, 0x0a, 0x9e, 0x06, 0x0b, 0x29, + 0x05, 0xd6, 0xa5, 0xb6, 0x7e, 0xcd, 0x3b, 0x36, + 0x92, 0xdd, 0xbd, 0x7f, 0x2d, 0x77, 0x8b, 0x8c, + 0x98, 0x03, 0xae, 0xe3, 0x28, 0x09, 0x1b, 0x58, + 0xfa, 0xb3, 0x24, 0xe4, 0xfa, 0xd6, 0x75, 0x94, + 0x55, 0x85, 0x80, 0x8b, 0x48, 0x31, 0xd7, 0xbc, + 0x3f, 0xf4, 0xde, 0xf0, 0x8e, 0x4b, 0x7a, 0x9d, + 0xe5, 0x76, 0xd2, 0x65, 0x86, 0xce, 0xc6, 0x4b, + 0x61, 0x16, 0x1a, 0xe1, 0x0b, 0x59, 0x4f, 0x09, + 0xe2, 0x6a, 0x7e, 0x90, 0x2e, 0xcb, 0xd0, 0x60, + 0x06, 0x91 +}; +static const u8 enc_assoc013[] __initconst = { + 0x50, 0x51, 0x52, 0x53, 0xc0, 0xc1, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7 +}; +static const u8 enc_nonce013[] __initconst = { + 0x07, 0x00, 0x00, 0x00, 0x40, 0x41, 0x42, 0x43, + 0x44, 0x45, 0x46, 0x47 +}; +static const u8 enc_key013[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - misc */ +static const u8 enc_input014[] __initconst = { }; +static const u8 enc_output014[] __initconst = { + 0x76, 0xac, 0xb3, 0x42, 0xcf, 0x31, 0x66, 0xa5, + 0xb6, 0x3c, 0x0c, 0x0e, 0xa1, 0x38, 0x3c, 0x8d +}; +static const u8 enc_assoc014[] __initconst = { }; +static const u8 enc_nonce014[] __initconst = { + 0x4d, 0xa5, 0xbf, 0x8d, 0xfd, 0x58, 0x52, 0xc1, + 0xea, 0x12, 0x37, 0x9d +}; +static const u8 enc_key014[] __initconst = { + 0x80, 0xba, 0x31, 0x92, 0xc8, 0x03, 0xce, 0x96, + 0x5e, 0xa3, 0x71, 0xd5, 0xff, 0x07, 0x3c, 0xf0, + 0xf4, 0x3b, 0x6a, 0x2a, 0xb5, 0x76, 0xb2, 0x08, + 0x42, 0x6e, 0x11, 0x40, 0x9c, 0x09, 0xb9, 0xb0 +}; + +/* wycheproof - misc */ +static const u8 enc_input015[] __initconst = { }; +static const u8 enc_output015[] __initconst = { + 0x90, 0x6f, 0xa6, 0x28, 0x4b, 0x52, 0xf8, 0x7b, + 0x73, 0x59, 0xcb, 0xaa, 0x75, 0x63, 0xc7, 0x09 +}; +static const u8 enc_assoc015[] __initconst = { + 0xbd, 0x50, 0x67, 0x64, 0xf2, 0xd2, 0xc4, 0x10 +}; +static const u8 enc_nonce015[] __initconst = { + 0xa9, 0x2e, 0xf0, 0xac, 0x99, 0x1d, 0xd5, 0x16, + 0xa3, 0xc6, 0xf6, 0x89 +}; +static const u8 enc_key015[] __initconst = { + 0x7a, 0x4c, 0xd7, 0x59, 0x17, 0x2e, 0x02, 0xeb, + 0x20, 0x4d, 0xb2, 0xc3, 0xf5, 0xc7, 0x46, 0x22, + 0x7d, 0xf5, 0x84, 0xfc, 0x13, 0x45, 0x19, 0x63, + 0x91, 0xdb, 0xb9, 0x57, 0x7a, 0x25, 0x07, 0x42 +}; + +/* wycheproof - misc */ +static const u8 enc_input016[] __initconst = { + 0x2a +}; +static const u8 enc_output016[] __initconst = { + 0x3a, 0xca, 0xc2, 0x7d, 0xec, 0x09, 0x68, 0x80, + 0x1e, 0x9f, 0x6e, 0xde, 0xd6, 0x9d, 0x80, 0x75, + 0x22 +}; +static const u8 enc_assoc016[] __initconst = { }; +static const u8 enc_nonce016[] __initconst = { + 0x99, 0xe2, 0x3e, 0xc4, 0x89, 0x85, 0xbc, 0xcd, + 0xee, 0xab, 0x60, 0xf1 +}; +static const u8 enc_key016[] __initconst = { + 0xcc, 0x56, 0xb6, 0x80, 0x55, 0x2e, 0xb7, 0x50, + 0x08, 0xf5, 0x48, 0x4b, 0x4c, 0xb8, 0x03, 0xfa, + 0x50, 0x63, 0xeb, 0xd6, 0xea, 0xb9, 0x1f, 0x6a, + 0xb6, 0xae, 0xf4, 0x91, 0x6a, 0x76, 0x62, 0x73 +}; + +/* wycheproof - misc */ +static const u8 enc_input017[] __initconst = { + 0x51 +}; +static const u8 enc_output017[] __initconst = { + 0xc4, 0x16, 0x83, 0x10, 0xca, 0x45, 0xb1, 0xf7, + 0xc6, 0x6c, 0xad, 0x4e, 0x99, 0xe4, 0x3f, 0x72, + 0xb9 +}; +static const u8 enc_assoc017[] __initconst = { + 0x91, 0xca, 0x6c, 0x59, 0x2c, 0xbc, 0xca, 0x53 +}; +static const u8 enc_nonce017[] __initconst = { + 0xab, 0x0d, 0xca, 0x71, 0x6e, 0xe0, 0x51, 0xd2, + 0x78, 0x2f, 0x44, 0x03 +}; +static const u8 enc_key017[] __initconst = { + 0x46, 0xf0, 0x25, 0x49, 0x65, 0xf7, 0x69, 0xd5, + 0x2b, 0xdb, 0x4a, 0x70, 0xb4, 0x43, 0x19, 0x9f, + 0x8e, 0xf2, 0x07, 0x52, 0x0d, 0x12, 0x20, 0xc5, + 0x5e, 0x4b, 0x70, 0xf0, 0xfd, 0xa6, 0x20, 0xee +}; + +/* wycheproof - misc */ +static const u8 enc_input018[] __initconst = { + 0x5c, 0x60 +}; +static const u8 enc_output018[] __initconst = { + 0x4d, 0x13, 0x91, 0xe8, 0xb6, 0x1e, 0xfb, 0x39, + 0xc1, 0x22, 0x19, 0x54, 0x53, 0x07, 0x7b, 0x22, + 0xe5, 0xe2 +}; +static const u8 enc_assoc018[] __initconst = { }; +static const u8 enc_nonce018[] __initconst = { + 0x46, 0x1a, 0xf1, 0x22, 0xe9, 0xf2, 0xe0, 0x34, + 0x7e, 0x03, 0xf2, 0xdb +}; +static const u8 enc_key018[] __initconst = { + 0x2f, 0x7f, 0x7e, 0x4f, 0x59, 0x2b, 0xb3, 0x89, + 0x19, 0x49, 0x89, 0x74, 0x35, 0x07, 0xbf, 0x3e, + 0xe9, 0xcb, 0xde, 0x17, 0x86, 0xb6, 0x69, 0x5f, + 0xe6, 0xc0, 0x25, 0xfd, 0x9b, 0xa4, 0xc1, 0x00 +}; + +/* wycheproof - misc */ +static const u8 enc_input019[] __initconst = { + 0xdd, 0xf2 +}; +static const u8 enc_output019[] __initconst = { + 0xb6, 0x0d, 0xea, 0xd0, 0xfd, 0x46, 0x97, 0xec, + 0x2e, 0x55, 0x58, 0x23, 0x77, 0x19, 0xd0, 0x24, + 0x37, 0xa2 +}; +static const u8 enc_assoc019[] __initconst = { + 0x88, 0x36, 0x4f, 0xc8, 0x06, 0x05, 0x18, 0xbf +}; +static const u8 enc_nonce019[] __initconst = { + 0x61, 0x54, 0x6b, 0xa5, 0xf1, 0x72, 0x05, 0x90, + 0xb6, 0x04, 0x0a, 0xc6 +}; +static const u8 enc_key019[] __initconst = { + 0xc8, 0x83, 0x3d, 0xce, 0x5e, 0xa9, 0xf2, 0x48, + 0xaa, 0x20, 0x30, 0xea, 0xcf, 0xe7, 0x2b, 0xff, + 0xe6, 0x9a, 0x62, 0x0c, 0xaf, 0x79, 0x33, 0x44, + 0xe5, 0x71, 0x8f, 0xe0, 0xd7, 0xab, 0x1a, 0x58 +}; + +/* wycheproof - misc */ +static const u8 enc_input020[] __initconst = { + 0xab, 0x85, 0xe9, 0xc1, 0x57, 0x17, 0x31 +}; +static const u8 enc_output020[] __initconst = { + 0x5d, 0xfe, 0x34, 0x40, 0xdb, 0xb3, 0xc3, 0xed, + 0x7a, 0x43, 0x4e, 0x26, 0x02, 0xd3, 0x94, 0x28, + 0x1e, 0x0a, 0xfa, 0x9f, 0xb7, 0xaa, 0x42 +}; +static const u8 enc_assoc020[] __initconst = { }; +static const u8 enc_nonce020[] __initconst = { + 0x3c, 0x4e, 0x65, 0x4d, 0x66, 0x3f, 0xa4, 0x59, + 0x6d, 0xc5, 0x5b, 0xb7 +}; +static const u8 enc_key020[] __initconst = { + 0x55, 0x56, 0x81, 0x58, 0xd3, 0xa6, 0x48, 0x3f, + 0x1f, 0x70, 0x21, 0xea, 0xb6, 0x9b, 0x70, 0x3f, + 0x61, 0x42, 0x51, 0xca, 0xdc, 0x1a, 0xf5, 0xd3, + 0x4a, 0x37, 0x4f, 0xdb, 0xfc, 0x5a, 0xda, 0xc7 +}; + +/* wycheproof - misc */ +static const u8 enc_input021[] __initconst = { + 0x4e, 0xe5, 0xcd, 0xa2, 0x0d, 0x42, 0x90 +}; +static const u8 enc_output021[] __initconst = { + 0x4b, 0xd4, 0x72, 0x12, 0x94, 0x1c, 0xe3, 0x18, + 0x5f, 0x14, 0x08, 0xee, 0x7f, 0xbf, 0x18, 0xf5, + 0xab, 0xad, 0x6e, 0x22, 0x53, 0xa1, 0xba +}; +static const u8 enc_assoc021[] __initconst = { + 0x84, 0xe4, 0x6b, 0xe8, 0xc0, 0x91, 0x90, 0x53 +}; +static const u8 enc_nonce021[] __initconst = { + 0x58, 0x38, 0x93, 0x75, 0xc6, 0x9e, 0xe3, 0x98, + 0xde, 0x94, 0x83, 0x96 +}; +static const u8 enc_key021[] __initconst = { + 0xe3, 0xc0, 0x9e, 0x7f, 0xab, 0x1a, 0xef, 0xb5, + 0x16, 0xda, 0x6a, 0x33, 0x02, 0x2a, 0x1d, 0xd4, + 0xeb, 0x27, 0x2c, 0x80, 0xd5, 0x40, 0xc5, 0xda, + 0x52, 0xa7, 0x30, 0xf3, 0x4d, 0x84, 0x0d, 0x7f +}; + +/* wycheproof - misc */ +static const u8 enc_input022[] __initconst = { + 0xbe, 0x33, 0x08, 0xf7, 0x2a, 0x2c, 0x6a, 0xed +}; +static const u8 enc_output022[] __initconst = { + 0x8e, 0x94, 0x39, 0xa5, 0x6e, 0xee, 0xc8, 0x17, + 0xfb, 0xe8, 0xa6, 0xed, 0x8f, 0xab, 0xb1, 0x93, + 0x75, 0x39, 0xdd, 0x6c, 0x00, 0xe9, 0x00, 0x21 +}; +static const u8 enc_assoc022[] __initconst = { }; +static const u8 enc_nonce022[] __initconst = { + 0x4f, 0x07, 0xaf, 0xed, 0xfd, 0xc3, 0xb6, 0xc2, + 0x36, 0x18, 0x23, 0xd3 +}; +static const u8 enc_key022[] __initconst = { + 0x51, 0xe4, 0xbf, 0x2b, 0xad, 0x92, 0xb7, 0xaf, + 0xf1, 0xa4, 0xbc, 0x05, 0x55, 0x0b, 0xa8, 0x1d, + 0xf4, 0xb9, 0x6f, 0xab, 0xf4, 0x1c, 0x12, 0xc7, + 0xb0, 0x0e, 0x60, 0xe4, 0x8d, 0xb7, 0xe1, 0x52 +}; + +/* wycheproof - misc */ +static const u8 enc_input023[] __initconst = { + 0xa4, 0xc9, 0xc2, 0x80, 0x1b, 0x71, 0xf7, 0xdf +}; +static const u8 enc_output023[] __initconst = { + 0xb9, 0xb9, 0x10, 0x43, 0x3a, 0xf0, 0x52, 0xb0, + 0x45, 0x30, 0xf5, 0x1a, 0xee, 0xe0, 0x24, 0xe0, + 0xa4, 0x45, 0xa6, 0x32, 0x8f, 0xa6, 0x7a, 0x18 +}; +static const u8 enc_assoc023[] __initconst = { + 0x66, 0xc0, 0xae, 0x70, 0x07, 0x6c, 0xb1, 0x4d +}; +static const u8 enc_nonce023[] __initconst = { + 0xb4, 0xea, 0x66, 0x6e, 0xe1, 0x19, 0x56, 0x33, + 0x66, 0x48, 0x4a, 0x78 +}; +static const u8 enc_key023[] __initconst = { + 0x11, 0x31, 0xc1, 0x41, 0x85, 0x77, 0xa0, 0x54, + 0xde, 0x7a, 0x4a, 0xc5, 0x51, 0x95, 0x0f, 0x1a, + 0x05, 0x3f, 0x9a, 0xe4, 0x6e, 0x5b, 0x75, 0xfe, + 0x4a, 0xbd, 0x56, 0x08, 0xd7, 0xcd, 0xda, 0xdd +}; + +/* wycheproof - misc */ +static const u8 enc_input024[] __initconst = { + 0x42, 0xba, 0xae, 0x59, 0x78, 0xfe, 0xaf, 0x5c, + 0x36, 0x8d, 0x14, 0xe0 +}; +static const u8 enc_output024[] __initconst = { + 0xff, 0x7d, 0xc2, 0x03, 0xb2, 0x6c, 0x46, 0x7a, + 0x6b, 0x50, 0xdb, 0x33, 0x57, 0x8c, 0x0f, 0x27, + 0x58, 0xc2, 0xe1, 0x4e, 0x36, 0xd4, 0xfc, 0x10, + 0x6d, 0xcb, 0x29, 0xb4 +}; +static const u8 enc_assoc024[] __initconst = { }; +static const u8 enc_nonce024[] __initconst = { + 0x9a, 0x59, 0xfc, 0xe2, 0x6d, 0xf0, 0x00, 0x5e, + 0x07, 0x53, 0x86, 0x56 +}; +static const u8 enc_key024[] __initconst = { + 0x99, 0xb6, 0x2b, 0xd5, 0xaf, 0xbe, 0x3f, 0xb0, + 0x15, 0xbd, 0xe9, 0x3f, 0x0a, 0xbf, 0x48, 0x39, + 0x57, 0xa1, 0xc3, 0xeb, 0x3c, 0xa5, 0x9c, 0xb5, + 0x0b, 0x39, 0xf7, 0xf8, 0xa9, 0xcc, 0x51, 0xbe +}; + +/* wycheproof - misc */ +static const u8 enc_input025[] __initconst = { + 0xfd, 0xc8, 0x5b, 0x94, 0xa4, 0xb2, 0xa6, 0xb7, + 0x59, 0xb1, 0xa0, 0xda +}; +static const u8 enc_output025[] __initconst = { + 0x9f, 0x88, 0x16, 0xde, 0x09, 0x94, 0xe9, 0x38, + 0xd9, 0xe5, 0x3f, 0x95, 0xd0, 0x86, 0xfc, 0x6c, + 0x9d, 0x8f, 0xa9, 0x15, 0xfd, 0x84, 0x23, 0xa7, + 0xcf, 0x05, 0x07, 0x2f +}; +static const u8 enc_assoc025[] __initconst = { + 0xa5, 0x06, 0xe1, 0xa5, 0xc6, 0x90, 0x93, 0xf9 +}; +static const u8 enc_nonce025[] __initconst = { + 0x58, 0xdb, 0xd4, 0xad, 0x2c, 0x4a, 0xd3, 0x5d, + 0xd9, 0x06, 0xe9, 0xce +}; +static const u8 enc_key025[] __initconst = { + 0x85, 0xf3, 0x5b, 0x62, 0x82, 0xcf, 0xf4, 0x40, + 0xbc, 0x10, 0x20, 0xc8, 0x13, 0x6f, 0xf2, 0x70, + 0x31, 0x11, 0x0f, 0xa6, 0x3e, 0xc1, 0x6f, 0x1e, + 0x82, 0x51, 0x18, 0xb0, 0x06, 0xb9, 0x12, 0x57 +}; + +/* wycheproof - misc */ +static const u8 enc_input026[] __initconst = { + 0x51, 0xf8, 0xc1, 0xf7, 0x31, 0xea, 0x14, 0xac, + 0xdb, 0x21, 0x0a, 0x6d, 0x97, 0x3e, 0x07 +}; +static const u8 enc_output026[] __initconst = { + 0x0b, 0x29, 0x63, 0x8e, 0x1f, 0xbd, 0xd6, 0xdf, + 0x53, 0x97, 0x0b, 0xe2, 0x21, 0x00, 0x42, 0x2a, + 0x91, 0x34, 0x08, 0x7d, 0x67, 0xa4, 0x6e, 0x79, + 0x17, 0x8d, 0x0a, 0x93, 0xf5, 0xe1, 0xd2 +}; +static const u8 enc_assoc026[] __initconst = { }; +static const u8 enc_nonce026[] __initconst = { + 0x68, 0xab, 0x7f, 0xdb, 0xf6, 0x19, 0x01, 0xda, + 0xd4, 0x61, 0xd2, 0x3c +}; +static const u8 enc_key026[] __initconst = { + 0x67, 0x11, 0x96, 0x27, 0xbd, 0x98, 0x8e, 0xda, + 0x90, 0x62, 0x19, 0xe0, 0x8c, 0x0d, 0x0d, 0x77, + 0x9a, 0x07, 0xd2, 0x08, 0xce, 0x8a, 0x4f, 0xe0, + 0x70, 0x9a, 0xf7, 0x55, 0xee, 0xec, 0x6d, 0xcb +}; + +/* wycheproof - misc */ +static const u8 enc_input027[] __initconst = { + 0x97, 0x46, 0x9d, 0xa6, 0x67, 0xd6, 0x11, 0x0f, + 0x9c, 0xbd, 0xa1, 0xd1, 0xa2, 0x06, 0x73 +}; +static const u8 enc_output027[] __initconst = { + 0x32, 0xdb, 0x66, 0xc4, 0xa3, 0x81, 0x9d, 0x81, + 0x55, 0x74, 0x55, 0xe5, 0x98, 0x0f, 0xed, 0xfe, + 0xae, 0x30, 0xde, 0xc9, 0x4e, 0x6a, 0xd3, 0xa9, + 0xee, 0xa0, 0x6a, 0x0d, 0x70, 0x39, 0x17 +}; +static const u8 enc_assoc027[] __initconst = { + 0x64, 0x53, 0xa5, 0x33, 0x84, 0x63, 0x22, 0x12 +}; +static const u8 enc_nonce027[] __initconst = { + 0xd9, 0x5b, 0x32, 0x43, 0xaf, 0xae, 0xf7, 0x14, + 0xc5, 0x03, 0x5b, 0x6a +}; +static const u8 enc_key027[] __initconst = { + 0xe6, 0xf1, 0x11, 0x8d, 0x41, 0xe4, 0xb4, 0x3f, + 0xb5, 0x82, 0x21, 0xb7, 0xed, 0x79, 0x67, 0x38, + 0x34, 0xe0, 0xd8, 0xac, 0x5c, 0x4f, 0xa6, 0x0b, + 0xbc, 0x8b, 0xc4, 0x89, 0x3a, 0x58, 0x89, 0x4d +}; + +/* wycheproof - misc */ +static const u8 enc_input028[] __initconst = { + 0x54, 0x9b, 0x36, 0x5a, 0xf9, 0x13, 0xf3, 0xb0, + 0x81, 0x13, 0x1c, 0xcb, 0x6b, 0x82, 0x55, 0x88 +}; +static const u8 enc_output028[] __initconst = { + 0xe9, 0x11, 0x0e, 0x9f, 0x56, 0xab, 0x3c, 0xa4, + 0x83, 0x50, 0x0c, 0xea, 0xba, 0xb6, 0x7a, 0x13, + 0x83, 0x6c, 0xca, 0xbf, 0x15, 0xa6, 0xa2, 0x2a, + 0x51, 0xc1, 0x07, 0x1c, 0xfa, 0x68, 0xfa, 0x0c +}; +static const u8 enc_assoc028[] __initconst = { }; +static const u8 enc_nonce028[] __initconst = { + 0x2f, 0xcb, 0x1b, 0x38, 0xa9, 0x9e, 0x71, 0xb8, + 0x47, 0x40, 0xad, 0x9b +}; +static const u8 enc_key028[] __initconst = { + 0x59, 0xd4, 0xea, 0xfb, 0x4d, 0xe0, 0xcf, 0xc7, + 0xd3, 0xdb, 0x99, 0xa8, 0xf5, 0x4b, 0x15, 0xd7, + 0xb3, 0x9f, 0x0a, 0xcc, 0x8d, 0xa6, 0x97, 0x63, + 0xb0, 0x19, 0xc1, 0x69, 0x9f, 0x87, 0x67, 0x4a +}; + +/* wycheproof - misc */ +static const u8 enc_input029[] __initconst = { + 0x55, 0xa4, 0x65, 0x64, 0x4f, 0x5b, 0x65, 0x09, + 0x28, 0xcb, 0xee, 0x7c, 0x06, 0x32, 0x14, 0xd6 +}; +static const u8 enc_output029[] __initconst = { + 0xe4, 0xb1, 0x13, 0xcb, 0x77, 0x59, 0x45, 0xf3, + 0xd3, 0xa8, 0xae, 0x9e, 0xc1, 0x41, 0xc0, 0x0c, + 0x7c, 0x43, 0xf1, 0x6c, 0xe0, 0x96, 0xd0, 0xdc, + 0x27, 0xc9, 0x58, 0x49, 0xdc, 0x38, 0x3b, 0x7d +}; +static const u8 enc_assoc029[] __initconst = { + 0x03, 0x45, 0x85, 0x62, 0x1a, 0xf8, 0xd7, 0xff +}; +static const u8 enc_nonce029[] __initconst = { + 0x11, 0x8a, 0x69, 0x64, 0xc2, 0xd3, 0xe3, 0x80, + 0x07, 0x1f, 0x52, 0x66 +}; +static const u8 enc_key029[] __initconst = { + 0xb9, 0x07, 0xa4, 0x50, 0x75, 0x51, 0x3f, 0xe8, + 0xa8, 0x01, 0x9e, 0xde, 0xe3, 0xf2, 0x59, 0x14, + 0x87, 0xb2, 0xa0, 0x30, 0xb0, 0x3c, 0x6e, 0x1d, + 0x77, 0x1c, 0x86, 0x25, 0x71, 0xd2, 0xea, 0x1e +}; + +/* wycheproof - misc */ +static const u8 enc_input030[] __initconst = { + 0x3f, 0xf1, 0x51, 0x4b, 0x1c, 0x50, 0x39, 0x15, + 0x91, 0x8f, 0x0c, 0x0c, 0x31, 0x09, 0x4a, 0x6e, + 0x1f +}; +static const u8 enc_output030[] __initconst = { + 0x02, 0xcc, 0x3a, 0xcb, 0x5e, 0xe1, 0xfc, 0xdd, + 0x12, 0xa0, 0x3b, 0xb8, 0x57, 0x97, 0x64, 0x74, + 0xd3, 0xd8, 0x3b, 0x74, 0x63, 0xa2, 0xc3, 0x80, + 0x0f, 0xe9, 0x58, 0xc2, 0x8e, 0xaa, 0x29, 0x08, + 0x13 +}; +static const u8 enc_assoc030[] __initconst = { }; +static const u8 enc_nonce030[] __initconst = { + 0x45, 0xaa, 0xa3, 0xe5, 0xd1, 0x6d, 0x2d, 0x42, + 0xdc, 0x03, 0x44, 0x5d +}; +static const u8 enc_key030[] __initconst = { + 0x3b, 0x24, 0x58, 0xd8, 0x17, 0x6e, 0x16, 0x21, + 0xc0, 0xcc, 0x24, 0xc0, 0xc0, 0xe2, 0x4c, 0x1e, + 0x80, 0xd7, 0x2f, 0x7e, 0xe9, 0x14, 0x9a, 0x4b, + 0x16, 0x61, 0x76, 0x62, 0x96, 0x16, 0xd0, 0x11 +}; + +/* wycheproof - misc */ +static const u8 enc_input031[] __initconst = { + 0x63, 0x85, 0x8c, 0xa3, 0xe2, 0xce, 0x69, 0x88, + 0x7b, 0x57, 0x8a, 0x3c, 0x16, 0x7b, 0x42, 0x1c, + 0x9c +}; +static const u8 enc_output031[] __initconst = { + 0x35, 0x76, 0x64, 0x88, 0xd2, 0xbc, 0x7c, 0x2b, + 0x8d, 0x17, 0xcb, 0xbb, 0x9a, 0xbf, 0xad, 0x9e, + 0x6d, 0x1f, 0x39, 0x1e, 0x65, 0x7b, 0x27, 0x38, + 0xdd, 0xa0, 0x84, 0x48, 0xcb, 0xa2, 0x81, 0x1c, + 0xeb +}; +static const u8 enc_assoc031[] __initconst = { + 0x9a, 0xaf, 0x29, 0x9e, 0xee, 0xa7, 0x8f, 0x79 +}; +static const u8 enc_nonce031[] __initconst = { + 0xf0, 0x38, 0x4f, 0xb8, 0x76, 0x12, 0x14, 0x10, + 0x63, 0x3d, 0x99, 0x3d +}; +static const u8 enc_key031[] __initconst = { + 0xf6, 0x0c, 0x6a, 0x1b, 0x62, 0x57, 0x25, 0xf7, + 0x6c, 0x70, 0x37, 0xb4, 0x8f, 0xe3, 0x57, 0x7f, + 0xa7, 0xf7, 0xb8, 0x7b, 0x1b, 0xd5, 0xa9, 0x82, + 0x17, 0x6d, 0x18, 0x23, 0x06, 0xff, 0xb8, 0x70 +}; + +/* wycheproof - misc */ +static const u8 enc_input032[] __initconst = { + 0x10, 0xf1, 0xec, 0xf9, 0xc6, 0x05, 0x84, 0x66, + 0x5d, 0x9a, 0xe5, 0xef, 0xe2, 0x79, 0xe7, 0xf7, + 0x37, 0x7e, 0xea, 0x69, 0x16, 0xd2, 0xb1, 0x11 +}; +static const u8 enc_output032[] __initconst = { + 0x42, 0xf2, 0x6c, 0x56, 0xcb, 0x4b, 0xe2, 0x1d, + 0x9d, 0x8d, 0x0c, 0x80, 0xfc, 0x99, 0xdd, 0xe0, + 0x0d, 0x75, 0xf3, 0x80, 0x74, 0xbf, 0xe7, 0x64, + 0x54, 0xaa, 0x7e, 0x13, 0xd4, 0x8f, 0xff, 0x7d, + 0x75, 0x57, 0x03, 0x94, 0x57, 0x04, 0x0a, 0x3a +}; +static const u8 enc_assoc032[] __initconst = { }; +static const u8 enc_nonce032[] __initconst = { + 0xe6, 0xb1, 0xad, 0xf2, 0xfd, 0x58, 0xa8, 0x76, + 0x2c, 0x65, 0xf3, 0x1b +}; +static const u8 enc_key032[] __initconst = { + 0x02, 0x12, 0xa8, 0xde, 0x50, 0x07, 0xed, 0x87, + 0xb3, 0x3f, 0x1a, 0x70, 0x90, 0xb6, 0x11, 0x4f, + 0x9e, 0x08, 0xce, 0xfd, 0x96, 0x07, 0xf2, 0xc2, + 0x76, 0xbd, 0xcf, 0xdb, 0xc5, 0xce, 0x9c, 0xd7 +}; + +/* wycheproof - misc */ +static const u8 enc_input033[] __initconst = { + 0x92, 0x22, 0xf9, 0x01, 0x8e, 0x54, 0xfd, 0x6d, + 0xe1, 0x20, 0x08, 0x06, 0xa9, 0xee, 0x8e, 0x4c, + 0xc9, 0x04, 0xd2, 0x9f, 0x25, 0xcb, 0xa1, 0x93 +}; +static const u8 enc_output033[] __initconst = { + 0x12, 0x30, 0x32, 0x43, 0x7b, 0x4b, 0xfd, 0x69, + 0x20, 0xe8, 0xf7, 0xe7, 0xe0, 0x08, 0x7a, 0xe4, + 0x88, 0x9e, 0xbe, 0x7a, 0x0a, 0xd0, 0xe9, 0x00, + 0x3c, 0xf6, 0x8f, 0x17, 0x95, 0x50, 0xda, 0x63, + 0xd3, 0xb9, 0x6c, 0x2d, 0x55, 0x41, 0x18, 0x65 +}; +static const u8 enc_assoc033[] __initconst = { + 0x3e, 0x8b, 0xc5, 0xad, 0xe1, 0x82, 0xff, 0x08 +}; +static const u8 enc_nonce033[] __initconst = { + 0x6b, 0x28, 0x2e, 0xbe, 0xcc, 0x54, 0x1b, 0xcd, + 0x78, 0x34, 0xed, 0x55 +}; +static const u8 enc_key033[] __initconst = { + 0xc5, 0xbc, 0x09, 0x56, 0x56, 0x46, 0xe7, 0xed, + 0xda, 0x95, 0x4f, 0x1f, 0x73, 0x92, 0x23, 0xda, + 0xda, 0x20, 0xb9, 0x5c, 0x44, 0xab, 0x03, 0x3d, + 0x0f, 0xae, 0x4b, 0x02, 0x83, 0xd1, 0x8b, 0xe3 +}; + +/* wycheproof - misc */ +static const u8 enc_input034[] __initconst = { + 0xb0, 0x53, 0x99, 0x92, 0x86, 0xa2, 0x82, 0x4f, + 0x42, 0xcc, 0x8c, 0x20, 0x3a, 0xb2, 0x4e, 0x2c, + 0x97, 0xa6, 0x85, 0xad, 0xcc, 0x2a, 0xd3, 0x26, + 0x62, 0x55, 0x8e, 0x55, 0xa5, 0xc7, 0x29 +}; +static const u8 enc_output034[] __initconst = { + 0x45, 0xc7, 0xd6, 0xb5, 0x3a, 0xca, 0xd4, 0xab, + 0xb6, 0x88, 0x76, 0xa6, 0xe9, 0x6a, 0x48, 0xfb, + 0x59, 0x52, 0x4d, 0x2c, 0x92, 0xc9, 0xd8, 0xa1, + 0x89, 0xc9, 0xfd, 0x2d, 0xb9, 0x17, 0x46, 0x56, + 0x6d, 0x3c, 0xa1, 0x0e, 0x31, 0x1b, 0x69, 0x5f, + 0x3e, 0xae, 0x15, 0x51, 0x65, 0x24, 0x93 +}; +static const u8 enc_assoc034[] __initconst = { }; +static const u8 enc_nonce034[] __initconst = { + 0x04, 0xa9, 0xbe, 0x03, 0x50, 0x8a, 0x5f, 0x31, + 0x37, 0x1a, 0x6f, 0xd2 +}; +static const u8 enc_key034[] __initconst = { + 0x2e, 0xb5, 0x1c, 0x46, 0x9a, 0xa8, 0xeb, 0x9e, + 0x6c, 0x54, 0xa8, 0x34, 0x9b, 0xae, 0x50, 0xa2, + 0x0f, 0x0e, 0x38, 0x27, 0x11, 0xbb, 0xa1, 0x15, + 0x2c, 0x42, 0x4f, 0x03, 0xb6, 0x67, 0x1d, 0x71 +}; + +/* wycheproof - misc */ +static const u8 enc_input035[] __initconst = { + 0xf4, 0x52, 0x06, 0xab, 0xc2, 0x55, 0x52, 0xb2, + 0xab, 0xc9, 0xab, 0x7f, 0xa2, 0x43, 0x03, 0x5f, + 0xed, 0xaa, 0xdd, 0xc3, 0xb2, 0x29, 0x39, 0x56, + 0xf1, 0xea, 0x6e, 0x71, 0x56, 0xe7, 0xeb +}; +static const u8 enc_output035[] __initconst = { + 0x46, 0xa8, 0x0c, 0x41, 0x87, 0x02, 0x47, 0x20, + 0x08, 0x46, 0x27, 0x58, 0x00, 0x80, 0xdd, 0xe5, + 0xa3, 0xf4, 0xa1, 0x10, 0x93, 0xa7, 0x07, 0x6e, + 0xd6, 0xf3, 0xd3, 0x26, 0xbc, 0x7b, 0x70, 0x53, + 0x4d, 0x4a, 0xa2, 0x83, 0x5a, 0x52, 0xe7, 0x2d, + 0x14, 0xdf, 0x0e, 0x4f, 0x47, 0xf2, 0x5f +}; +static const u8 enc_assoc035[] __initconst = { + 0x37, 0x46, 0x18, 0xa0, 0x6e, 0xa9, 0x8a, 0x48 +}; +static const u8 enc_nonce035[] __initconst = { + 0x47, 0x0a, 0x33, 0x9e, 0xcb, 0x32, 0x19, 0xb8, + 0xb8, 0x1a, 0x1f, 0x8b +}; +static const u8 enc_key035[] __initconst = { + 0x7f, 0x5b, 0x74, 0xc0, 0x7e, 0xd1, 0xb4, 0x0f, + 0xd1, 0x43, 0x58, 0xfe, 0x2f, 0xf2, 0xa7, 0x40, + 0xc1, 0x16, 0xc7, 0x70, 0x65, 0x10, 0xe6, 0xa4, + 0x37, 0xf1, 0x9e, 0xa4, 0x99, 0x11, 0xce, 0xc4 +}; + +/* wycheproof - misc */ +static const u8 enc_input036[] __initconst = { + 0xb9, 0xc5, 0x54, 0xcb, 0xc3, 0x6a, 0xc1, 0x8a, + 0xe8, 0x97, 0xdf, 0x7b, 0xee, 0xca, 0xc1, 0xdb, + 0xeb, 0x4e, 0xaf, 0xa1, 0x56, 0xbb, 0x60, 0xce, + 0x2e, 0x5d, 0x48, 0xf0, 0x57, 0x15, 0xe6, 0x78 +}; +static const u8 enc_output036[] __initconst = { + 0xea, 0x29, 0xaf, 0xa4, 0x9d, 0x36, 0xe8, 0x76, + 0x0f, 0x5f, 0xe1, 0x97, 0x23, 0xb9, 0x81, 0x1e, + 0xd5, 0xd5, 0x19, 0x93, 0x4a, 0x44, 0x0f, 0x50, + 0x81, 0xac, 0x43, 0x0b, 0x95, 0x3b, 0x0e, 0x21, + 0x22, 0x25, 0x41, 0xaf, 0x46, 0xb8, 0x65, 0x33, + 0xc6, 0xb6, 0x8d, 0x2f, 0xf1, 0x08, 0xa7, 0xea +}; +static const u8 enc_assoc036[] __initconst = { }; +static const u8 enc_nonce036[] __initconst = { + 0x72, 0xcf, 0xd9, 0x0e, 0xf3, 0x02, 0x6c, 0xa2, + 0x2b, 0x7e, 0x6e, 0x6a +}; +static const u8 enc_key036[] __initconst = { + 0xe1, 0x73, 0x1d, 0x58, 0x54, 0xe1, 0xb7, 0x0c, + 0xb3, 0xff, 0xe8, 0xb7, 0x86, 0xa2, 0xb3, 0xeb, + 0xf0, 0x99, 0x43, 0x70, 0x95, 0x47, 0x57, 0xb9, + 0xdc, 0x8c, 0x7b, 0xc5, 0x35, 0x46, 0x34, 0xa3 +}; + +/* wycheproof - misc */ +static const u8 enc_input037[] __initconst = { + 0x6b, 0x26, 0x04, 0x99, 0x6c, 0xd3, 0x0c, 0x14, + 0xa1, 0x3a, 0x52, 0x57, 0xed, 0x6c, 0xff, 0xd3, + 0xbc, 0x5e, 0x29, 0xd6, 0xb9, 0x7e, 0xb1, 0x79, + 0x9e, 0xb3, 0x35, 0xe2, 0x81, 0xea, 0x45, 0x1e +}; +static const u8 enc_output037[] __initconst = { + 0x6d, 0xad, 0x63, 0x78, 0x97, 0x54, 0x4d, 0x8b, + 0xf6, 0xbe, 0x95, 0x07, 0xed, 0x4d, 0x1b, 0xb2, + 0xe9, 0x54, 0xbc, 0x42, 0x7e, 0x5d, 0xe7, 0x29, + 0xda, 0xf5, 0x07, 0x62, 0x84, 0x6f, 0xf2, 0xf4, + 0x7b, 0x99, 0x7d, 0x93, 0xc9, 0x82, 0x18, 0x9d, + 0x70, 0x95, 0xdc, 0x79, 0x4c, 0x74, 0x62, 0x32 +}; +static const u8 enc_assoc037[] __initconst = { + 0x23, 0x33, 0xe5, 0xce, 0x0f, 0x93, 0xb0, 0x59 +}; +static const u8 enc_nonce037[] __initconst = { + 0x26, 0x28, 0x80, 0xd4, 0x75, 0xf3, 0xda, 0xc5, + 0x34, 0x0d, 0xd1, 0xb8 +}; +static const u8 enc_key037[] __initconst = { + 0x27, 0xd8, 0x60, 0x63, 0x1b, 0x04, 0x85, 0xa4, + 0x10, 0x70, 0x2f, 0xea, 0x61, 0xbc, 0x87, 0x3f, + 0x34, 0x42, 0x26, 0x0c, 0xad, 0xed, 0x4a, 0xbd, + 0xe2, 0x5b, 0x78, 0x6a, 0x2d, 0x97, 0xf1, 0x45 +}; + +/* wycheproof - misc */ +static const u8 enc_input038[] __initconst = { + 0x97, 0x3d, 0x0c, 0x75, 0x38, 0x26, 0xba, 0xe4, + 0x66, 0xcf, 0x9a, 0xbb, 0x34, 0x93, 0x15, 0x2e, + 0x9d, 0xe7, 0x81, 0x9e, 0x2b, 0xd0, 0xc7, 0x11, + 0x71, 0x34, 0x6b, 0x4d, 0x2c, 0xeb, 0xf8, 0x04, + 0x1a, 0xa3, 0xce, 0xdc, 0x0d, 0xfd, 0x7b, 0x46, + 0x7e, 0x26, 0x22, 0x8b, 0xc8, 0x6c, 0x9a +}; +static const u8 enc_output038[] __initconst = { + 0xfb, 0xa7, 0x8a, 0xe4, 0xf9, 0xd8, 0x08, 0xa6, + 0x2e, 0x3d, 0xa4, 0x0b, 0xe2, 0xcb, 0x77, 0x00, + 0xc3, 0x61, 0x3d, 0x9e, 0xb2, 0xc5, 0x29, 0xc6, + 0x52, 0xe7, 0x6a, 0x43, 0x2c, 0x65, 0x8d, 0x27, + 0x09, 0x5f, 0x0e, 0xb8, 0xf9, 0x40, 0xc3, 0x24, + 0x98, 0x1e, 0xa9, 0x35, 0xe5, 0x07, 0xf9, 0x8f, + 0x04, 0x69, 0x56, 0xdb, 0x3a, 0x51, 0x29, 0x08, + 0xbd, 0x7a, 0xfc, 0x8f, 0x2a, 0xb0, 0xa9 +}; +static const u8 enc_assoc038[] __initconst = { }; +static const u8 enc_nonce038[] __initconst = { + 0xe7, 0x4a, 0x51, 0x5e, 0x7e, 0x21, 0x02, 0xb9, + 0x0b, 0xef, 0x55, 0xd2 +}; +static const u8 enc_key038[] __initconst = { + 0xcf, 0x0d, 0x40, 0xa4, 0x64, 0x4e, 0x5f, 0x51, + 0x81, 0x51, 0x65, 0xd5, 0x30, 0x1b, 0x22, 0x63, + 0x1f, 0x45, 0x44, 0xc4, 0x9a, 0x18, 0x78, 0xe3, + 0xa0, 0xa5, 0xe8, 0xe1, 0xaa, 0xe0, 0xf2, 0x64 +}; + +/* wycheproof - misc */ +static const u8 enc_input039[] __initconst = { + 0xa9, 0x89, 0x95, 0x50, 0x4d, 0xf1, 0x6f, 0x74, + 0x8b, 0xfb, 0x77, 0x85, 0xff, 0x91, 0xee, 0xb3, + 0xb6, 0x60, 0xea, 0x9e, 0xd3, 0x45, 0x0c, 0x3d, + 0x5e, 0x7b, 0x0e, 0x79, 0xef, 0x65, 0x36, 0x59, + 0xa9, 0x97, 0x8d, 0x75, 0x54, 0x2e, 0xf9, 0x1c, + 0x45, 0x67, 0x62, 0x21, 0x56, 0x40, 0xb9 +}; +static const u8 enc_output039[] __initconst = { + 0xa1, 0xff, 0xed, 0x80, 0x76, 0x18, 0x29, 0xec, + 0xce, 0x24, 0x2e, 0x0e, 0x88, 0xb1, 0x38, 0x04, + 0x90, 0x16, 0xbc, 0xa0, 0x18, 0xda, 0x2b, 0x6e, + 0x19, 0x98, 0x6b, 0x3e, 0x31, 0x8c, 0xae, 0x8d, + 0x80, 0x61, 0x98, 0xfb, 0x4c, 0x52, 0x7c, 0xc3, + 0x93, 0x50, 0xeb, 0xdd, 0xea, 0xc5, 0x73, 0xc4, + 0xcb, 0xf0, 0xbe, 0xfd, 0xa0, 0xb7, 0x02, 0x42, + 0xc6, 0x40, 0xd7, 0xcd, 0x02, 0xd7, 0xa3 +}; +static const u8 enc_assoc039[] __initconst = { + 0xb3, 0xe4, 0x06, 0x46, 0x83, 0xb0, 0x2d, 0x84 +}; +static const u8 enc_nonce039[] __initconst = { + 0xd4, 0xd8, 0x07, 0x34, 0x16, 0x83, 0x82, 0x5b, + 0x31, 0xcd, 0x4d, 0x95 +}; +static const u8 enc_key039[] __initconst = { + 0x6c, 0xbf, 0xd7, 0x1c, 0x64, 0x5d, 0x18, 0x4c, + 0xf5, 0xd2, 0x3c, 0x40, 0x2b, 0xdb, 0x0d, 0x25, + 0xec, 0x54, 0x89, 0x8c, 0x8a, 0x02, 0x73, 0xd4, + 0x2e, 0xb5, 0xbe, 0x10, 0x9f, 0xdc, 0xb2, 0xac +}; + +/* wycheproof - misc */ +static const u8 enc_input040[] __initconst = { + 0xd0, 0x96, 0x80, 0x31, 0x81, 0xbe, 0xef, 0x9e, + 0x00, 0x8f, 0xf8, 0x5d, 0x5d, 0xdc, 0x38, 0xdd, + 0xac, 0xf0, 0xf0, 0x9e, 0xe5, 0xf7, 0xe0, 0x7f, + 0x1e, 0x40, 0x79, 0xcb, 0x64, 0xd0, 0xdc, 0x8f, + 0x5e, 0x67, 0x11, 0xcd, 0x49, 0x21, 0xa7, 0x88, + 0x7d, 0xe7, 0x6e, 0x26, 0x78, 0xfd, 0xc6, 0x76, + 0x18, 0xf1, 0x18, 0x55, 0x86, 0xbf, 0xea, 0x9d, + 0x4c, 0x68, 0x5d, 0x50, 0xe4, 0xbb, 0x9a, 0x82 +}; +static const u8 enc_output040[] __initconst = { + 0x9a, 0x4e, 0xf2, 0x2b, 0x18, 0x16, 0x77, 0xb5, + 0x75, 0x5c, 0x08, 0xf7, 0x47, 0xc0, 0xf8, 0xd8, + 0xe8, 0xd4, 0xc1, 0x8a, 0x9c, 0xc2, 0x40, 0x5c, + 0x12, 0xbb, 0x51, 0xbb, 0x18, 0x72, 0xc8, 0xe8, + 0xb8, 0x77, 0x67, 0x8b, 0xec, 0x44, 0x2c, 0xfc, + 0xbb, 0x0f, 0xf4, 0x64, 0xa6, 0x4b, 0x74, 0x33, + 0x2c, 0xf0, 0x72, 0x89, 0x8c, 0x7e, 0x0e, 0xdd, + 0xf6, 0x23, 0x2e, 0xa6, 0xe2, 0x7e, 0xfe, 0x50, + 0x9f, 0xf3, 0x42, 0x7a, 0x0f, 0x32, 0xfa, 0x56, + 0x6d, 0x9c, 0xa0, 0xa7, 0x8a, 0xef, 0xc0, 0x13 +}; +static const u8 enc_assoc040[] __initconst = { }; +static const u8 enc_nonce040[] __initconst = { + 0xd6, 0x10, 0x40, 0xa3, 0x13, 0xed, 0x49, 0x28, + 0x23, 0xcc, 0x06, 0x5b +}; +static const u8 enc_key040[] __initconst = { + 0x5b, 0x1d, 0x10, 0x35, 0xc0, 0xb1, 0x7e, 0xe0, + 0xb0, 0x44, 0x47, 0x67, 0xf8, 0x0a, 0x25, 0xb8, + 0xc1, 0xb7, 0x41, 0xf4, 0xb5, 0x0a, 0x4d, 0x30, + 0x52, 0x22, 0x6b, 0xaa, 0x1c, 0x6f, 0xb7, 0x01 +}; + +/* wycheproof - misc */ +static const u8 enc_input041[] __initconst = { + 0x94, 0xee, 0x16, 0x6d, 0x6d, 0x6e, 0xcf, 0x88, + 0x32, 0x43, 0x71, 0x36, 0xb4, 0xae, 0x80, 0x5d, + 0x42, 0x88, 0x64, 0x35, 0x95, 0x86, 0xd9, 0x19, + 0x3a, 0x25, 0x01, 0x62, 0x93, 0xed, 0xba, 0x44, + 0x3c, 0x58, 0xe0, 0x7e, 0x7b, 0x71, 0x95, 0xec, + 0x5b, 0xd8, 0x45, 0x82, 0xa9, 0xd5, 0x6c, 0x8d, + 0x4a, 0x10, 0x8c, 0x7d, 0x7c, 0xe3, 0x4e, 0x6c, + 0x6f, 0x8e, 0xa1, 0xbe, 0xc0, 0x56, 0x73, 0x17 +}; +static const u8 enc_output041[] __initconst = { + 0x5f, 0xbb, 0xde, 0xcc, 0x34, 0xbe, 0x20, 0x16, + 0x14, 0xf6, 0x36, 0x03, 0x1e, 0xeb, 0x42, 0xf1, + 0xca, 0xce, 0x3c, 0x79, 0xa1, 0x2c, 0xff, 0xd8, + 0x71, 0xee, 0x8e, 0x73, 0x82, 0x0c, 0x82, 0x97, + 0x49, 0xf1, 0xab, 0xb4, 0x29, 0x43, 0x67, 0x84, + 0x9f, 0xb6, 0xc2, 0xaa, 0x56, 0xbd, 0xa8, 0xa3, + 0x07, 0x8f, 0x72, 0x3d, 0x7c, 0x1c, 0x85, 0x20, + 0x24, 0xb0, 0x17, 0xb5, 0x89, 0x73, 0xfb, 0x1e, + 0x09, 0x26, 0x3d, 0xa7, 0xb4, 0xcb, 0x92, 0x14, + 0x52, 0xf9, 0x7d, 0xca, 0x40, 0xf5, 0x80, 0xec +}; +static const u8 enc_assoc041[] __initconst = { + 0x71, 0x93, 0xf6, 0x23, 0x66, 0x33, 0x21, 0xa2 +}; +static const u8 enc_nonce041[] __initconst = { + 0xd3, 0x1c, 0x21, 0xab, 0xa1, 0x75, 0xb7, 0x0d, + 0xe4, 0xeb, 0xb1, 0x9c +}; +static const u8 enc_key041[] __initconst = { + 0x97, 0xd6, 0x35, 0xc4, 0xf4, 0x75, 0x74, 0xd9, + 0x99, 0x8a, 0x90, 0x87, 0x5d, 0xa1, 0xd3, 0xa2, + 0x84, 0xb7, 0x55, 0xb2, 0xd3, 0x92, 0x97, 0xa5, + 0x72, 0x52, 0x35, 0x19, 0x0e, 0x10, 0xa9, 0x7e +}; + +/* wycheproof - misc */ +static const u8 enc_input042[] __initconst = { + 0xb4, 0x29, 0xeb, 0x80, 0xfb, 0x8f, 0xe8, 0xba, + 0xed, 0xa0, 0xc8, 0x5b, 0x9c, 0x33, 0x34, 0x58, + 0xe7, 0xc2, 0x99, 0x2e, 0x55, 0x84, 0x75, 0x06, + 0x9d, 0x12, 0xd4, 0x5c, 0x22, 0x21, 0x75, 0x64, + 0x12, 0x15, 0x88, 0x03, 0x22, 0x97, 0xef, 0xf5, + 0x67, 0x83, 0x74, 0x2a, 0x5f, 0xc2, 0x2d, 0x74, + 0x10, 0xff, 0xb2, 0x9d, 0x66, 0x09, 0x86, 0x61, + 0xd7, 0x6f, 0x12, 0x6c, 0x3c, 0x27, 0x68, 0x9e, + 0x43, 0xb3, 0x72, 0x67, 0xca, 0xc5, 0xa3, 0xa6, + 0xd3, 0xab, 0x49, 0xe3, 0x91, 0xda, 0x29, 0xcd, + 0x30, 0x54, 0xa5, 0x69, 0x2e, 0x28, 0x07, 0xe4, + 0xc3, 0xea, 0x46, 0xc8, 0x76, 0x1d, 0x50, 0xf5, + 0x92 +}; +static const u8 enc_output042[] __initconst = { + 0xd0, 0x10, 0x2f, 0x6c, 0x25, 0x8b, 0xf4, 0x97, + 0x42, 0xce, 0xc3, 0x4c, 0xf2, 0xd0, 0xfe, 0xdf, + 0x23, 0xd1, 0x05, 0xfb, 0x4c, 0x84, 0xcf, 0x98, + 0x51, 0x5e, 0x1b, 0xc9, 0xa6, 0x4f, 0x8a, 0xd5, + 0xbe, 0x8f, 0x07, 0x21, 0xbd, 0xe5, 0x06, 0x45, + 0xd0, 0x00, 0x83, 0xc3, 0xa2, 0x63, 0xa3, 0x10, + 0x53, 0xb7, 0x60, 0x24, 0x5f, 0x52, 0xae, 0x28, + 0x66, 0xa5, 0xec, 0x83, 0xb1, 0x9f, 0x61, 0xbe, + 0x1d, 0x30, 0xd5, 0xc5, 0xd9, 0xfe, 0xcc, 0x4c, + 0xbb, 0xe0, 0x8f, 0xd3, 0x85, 0x81, 0x3a, 0x2a, + 0xa3, 0x9a, 0x00, 0xff, 0x9c, 0x10, 0xf7, 0xf2, + 0x37, 0x02, 0xad, 0xd1, 0xe4, 0xb2, 0xff, 0xa3, + 0x1c, 0x41, 0x86, 0x5f, 0xc7, 0x1d, 0xe1, 0x2b, + 0x19, 0x61, 0x21, 0x27, 0xce, 0x49, 0x99, 0x3b, + 0xb0 +}; +static const u8 enc_assoc042[] __initconst = { }; +static const u8 enc_nonce042[] __initconst = { + 0x17, 0xc8, 0x6a, 0x8a, 0xbb, 0xb7, 0xe0, 0x03, + 0xac, 0xde, 0x27, 0x99 +}; +static const u8 enc_key042[] __initconst = { + 0xfe, 0x6e, 0x55, 0xbd, 0xae, 0xd1, 0xf7, 0x28, + 0x4c, 0xa5, 0xfc, 0x0f, 0x8c, 0x5f, 0x2b, 0x8d, + 0xf5, 0x6d, 0xc0, 0xf4, 0x9e, 0x8c, 0xa6, 0x6a, + 0x41, 0x99, 0x5e, 0x78, 0x33, 0x51, 0xf9, 0x01 +}; + +/* wycheproof - misc */ +static const u8 enc_input043[] __initconst = { + 0xce, 0xb5, 0x34, 0xce, 0x50, 0xdc, 0x23, 0xff, + 0x63, 0x8a, 0xce, 0x3e, 0xf6, 0x3a, 0xb2, 0xcc, + 0x29, 0x73, 0xee, 0xad, 0xa8, 0x07, 0x85, 0xfc, + 0x16, 0x5d, 0x06, 0xc2, 0xf5, 0x10, 0x0f, 0xf5, + 0xe8, 0xab, 0x28, 0x82, 0xc4, 0x75, 0xaf, 0xcd, + 0x05, 0xcc, 0xd4, 0x9f, 0x2e, 0x7d, 0x8f, 0x55, + 0xef, 0x3a, 0x72, 0xe3, 0xdc, 0x51, 0xd6, 0x85, + 0x2b, 0x8e, 0x6b, 0x9e, 0x7a, 0xec, 0xe5, 0x7b, + 0xe6, 0x55, 0x6b, 0x0b, 0x6d, 0x94, 0x13, 0xe3, + 0x3f, 0xc5, 0xfc, 0x24, 0xa9, 0xa2, 0x05, 0xad, + 0x59, 0x57, 0x4b, 0xb3, 0x9d, 0x94, 0x4a, 0x92, + 0xdc, 0x47, 0x97, 0x0d, 0x84, 0xa6, 0xad, 0x31, + 0x76 +}; +static const u8 enc_output043[] __initconst = { + 0x75, 0x45, 0x39, 0x1b, 0x51, 0xde, 0x01, 0xd5, + 0xc5, 0x3d, 0xfa, 0xca, 0x77, 0x79, 0x09, 0x06, + 0x3e, 0x58, 0xed, 0xee, 0x4b, 0xb1, 0x22, 0x7e, + 0x71, 0x10, 0xac, 0x4d, 0x26, 0x20, 0xc2, 0xae, + 0xc2, 0xf8, 0x48, 0xf5, 0x6d, 0xee, 0xb0, 0x37, + 0xa8, 0xdc, 0xed, 0x75, 0xaf, 0xa8, 0xa6, 0xc8, + 0x90, 0xe2, 0xde, 0xe4, 0x2f, 0x95, 0x0b, 0xb3, + 0x3d, 0x9e, 0x24, 0x24, 0xd0, 0x8a, 0x50, 0x5d, + 0x89, 0x95, 0x63, 0x97, 0x3e, 0xd3, 0x88, 0x70, + 0xf3, 0xde, 0x6e, 0xe2, 0xad, 0xc7, 0xfe, 0x07, + 0x2c, 0x36, 0x6c, 0x14, 0xe2, 0xcf, 0x7c, 0xa6, + 0x2f, 0xb3, 0xd3, 0x6b, 0xee, 0x11, 0x68, 0x54, + 0x61, 0xb7, 0x0d, 0x44, 0xef, 0x8c, 0x66, 0xc5, + 0xc7, 0xbb, 0xf1, 0x0d, 0xca, 0xdd, 0x7f, 0xac, + 0xf6 +}; +static const u8 enc_assoc043[] __initconst = { + 0xa1, 0x1c, 0x40, 0xb6, 0x03, 0x76, 0x73, 0x30 +}; +static const u8 enc_nonce043[] __initconst = { + 0x46, 0x36, 0x2f, 0x45, 0xd6, 0x37, 0x9e, 0x63, + 0xe5, 0x22, 0x94, 0x60 +}; +static const u8 enc_key043[] __initconst = { + 0xaa, 0xbc, 0x06, 0x34, 0x74, 0xe6, 0x5c, 0x4c, + 0x3e, 0x9b, 0xdc, 0x48, 0x0d, 0xea, 0x97, 0xb4, + 0x51, 0x10, 0xc8, 0x61, 0x88, 0x46, 0xff, 0x6b, + 0x15, 0xbd, 0xd2, 0xa4, 0xa5, 0x68, 0x2c, 0x4e +}; + +/* wycheproof - misc */ +static const u8 enc_input044[] __initconst = { + 0xe5, 0xcc, 0xaa, 0x44, 0x1b, 0xc8, 0x14, 0x68, + 0x8f, 0x8f, 0x6e, 0x8f, 0x28, 0xb5, 0x00, 0xb2 +}; +static const u8 enc_output044[] __initconst = { + 0x7e, 0x72, 0xf5, 0xa1, 0x85, 0xaf, 0x16, 0xa6, + 0x11, 0x92, 0x1b, 0x43, 0x8f, 0x74, 0x9f, 0x0b, + 0x12, 0x42, 0xc6, 0x70, 0x73, 0x23, 0x34, 0x02, + 0x9a, 0xdf, 0xe1, 0xc5, 0x00, 0x16, 0x51, 0xe4 +}; +static const u8 enc_assoc044[] __initconst = { + 0x02 +}; +static const u8 enc_nonce044[] __initconst = { + 0x87, 0x34, 0x5f, 0x10, 0x55, 0xfd, 0x9e, 0x21, + 0x02, 0xd5, 0x06, 0x56 +}; +static const u8 enc_key044[] __initconst = { + 0x7d, 0x00, 0xb4, 0x80, 0x95, 0xad, 0xfa, 0x32, + 0x72, 0x05, 0x06, 0x07, 0xb2, 0x64, 0x18, 0x50, + 0x02, 0xba, 0x99, 0x95, 0x7c, 0x49, 0x8b, 0xe0, + 0x22, 0x77, 0x0f, 0x2c, 0xe2, 0xf3, 0x14, 0x3c +}; + +/* wycheproof - misc */ +static const u8 enc_input045[] __initconst = { + 0x02, 0xcd, 0xe1, 0x68, 0xfb, 0xa3, 0xf5, 0x44, + 0xbb, 0xd0, 0x33, 0x2f, 0x7a, 0xde, 0xad, 0xa8 +}; +static const u8 enc_output045[] __initconst = { + 0x85, 0xf2, 0x9a, 0x71, 0x95, 0x57, 0xcd, 0xd1, + 0x4d, 0x1f, 0x8f, 0xff, 0xab, 0x6d, 0x9e, 0x60, + 0x73, 0x2c, 0xa3, 0x2b, 0xec, 0xd5, 0x15, 0xa1, + 0xed, 0x35, 0x3f, 0x54, 0x2e, 0x99, 0x98, 0x58 +}; +static const u8 enc_assoc045[] __initconst = { + 0xb6, 0x48 +}; +static const u8 enc_nonce045[] __initconst = { + 0x87, 0xa3, 0x16, 0x3e, 0xc0, 0x59, 0x8a, 0xd9, + 0x5b, 0x3a, 0xa7, 0x13 +}; +static const u8 enc_key045[] __initconst = { + 0x64, 0x32, 0x71, 0x7f, 0x1d, 0xb8, 0x5e, 0x41, + 0xac, 0x78, 0x36, 0xbc, 0xe2, 0x51, 0x85, 0xa0, + 0x80, 0xd5, 0x76, 0x2b, 0x9e, 0x2b, 0x18, 0x44, + 0x4b, 0x6e, 0xc7, 0x2c, 0x3b, 0xd8, 0xe4, 0xdc +}; + +/* wycheproof - misc */ +static const u8 enc_input046[] __initconst = { + 0x16, 0xdd, 0xd2, 0x3f, 0xf5, 0x3f, 0x3d, 0x23, + 0xc0, 0x63, 0x34, 0x48, 0x70, 0x40, 0xeb, 0x47 +}; +static const u8 enc_output046[] __initconst = { + 0xc1, 0xb2, 0x95, 0x93, 0x6d, 0x56, 0xfa, 0xda, + 0xc0, 0x3e, 0x5f, 0x74, 0x2b, 0xff, 0x73, 0xa1, + 0x39, 0xc4, 0x57, 0xdb, 0xab, 0x66, 0x38, 0x2b, + 0xab, 0xb3, 0xb5, 0x58, 0x00, 0xcd, 0xa5, 0xb8 +}; +static const u8 enc_assoc046[] __initconst = { + 0xbd, 0x4c, 0xd0, 0x2f, 0xc7, 0x50, 0x2b, 0xbd, + 0xbd, 0xf6, 0xc9, 0xa3, 0xcb, 0xe8, 0xf0 +}; +static const u8 enc_nonce046[] __initconst = { + 0x6f, 0x57, 0x3a, 0xa8, 0x6b, 0xaa, 0x49, 0x2b, + 0xa4, 0x65, 0x96, 0xdf +}; +static const u8 enc_key046[] __initconst = { + 0x8e, 0x34, 0xcf, 0x73, 0xd2, 0x45, 0xa1, 0x08, + 0x2a, 0x92, 0x0b, 0x86, 0x36, 0x4e, 0xb8, 0x96, + 0xc4, 0x94, 0x64, 0x67, 0xbc, 0xb3, 0xd5, 0x89, + 0x29, 0xfc, 0xb3, 0x66, 0x90, 0xe6, 0x39, 0x4f +}; + +/* wycheproof - misc */ +static const u8 enc_input047[] __initconst = { + 0x62, 0x3b, 0x78, 0x50, 0xc3, 0x21, 0xe2, 0xcf, + 0x0c, 0x6f, 0xbc, 0xc8, 0xdf, 0xd1, 0xaf, 0xf2 +}; +static const u8 enc_output047[] __initconst = { + 0xc8, 0x4c, 0x9b, 0xb7, 0xc6, 0x1c, 0x1b, 0xcb, + 0x17, 0x77, 0x2a, 0x1c, 0x50, 0x0c, 0x50, 0x95, + 0xdb, 0xad, 0xf7, 0xa5, 0x13, 0x8c, 0xa0, 0x34, + 0x59, 0xa2, 0xcd, 0x65, 0x83, 0x1e, 0x09, 0x2f +}; +static const u8 enc_assoc047[] __initconst = { + 0x89, 0xcc, 0xe9, 0xfb, 0x47, 0x44, 0x1d, 0x07, + 0xe0, 0x24, 0x5a, 0x66, 0xfe, 0x8b, 0x77, 0x8b +}; +static const u8 enc_nonce047[] __initconst = { + 0x1a, 0x65, 0x18, 0xf0, 0x2e, 0xde, 0x1d, 0xa6, + 0x80, 0x92, 0x66, 0xd9 +}; +static const u8 enc_key047[] __initconst = { + 0xcb, 0x55, 0x75, 0xf5, 0xc7, 0xc4, 0x5c, 0x91, + 0xcf, 0x32, 0x0b, 0x13, 0x9f, 0xb5, 0x94, 0x23, + 0x75, 0x60, 0xd0, 0xa3, 0xe6, 0xf8, 0x65, 0xa6, + 0x7d, 0x4f, 0x63, 0x3f, 0x2c, 0x08, 0xf0, 0x16 +}; + +/* wycheproof - misc */ +static const u8 enc_input048[] __initconst = { + 0x87, 0xb3, 0xa4, 0xd7, 0xb2, 0x6d, 0x8d, 0x32, + 0x03, 0xa0, 0xde, 0x1d, 0x64, 0xef, 0x82, 0xe3 +}; +static const u8 enc_output048[] __initconst = { + 0x94, 0xbc, 0x80, 0x62, 0x1e, 0xd1, 0xe7, 0x1b, + 0x1f, 0xd2, 0xb5, 0xc3, 0xa1, 0x5e, 0x35, 0x68, + 0x33, 0x35, 0x11, 0x86, 0x17, 0x96, 0x97, 0x84, + 0x01, 0x59, 0x8b, 0x96, 0x37, 0x22, 0xf5, 0xb3 +}; +static const u8 enc_assoc048[] __initconst = { + 0xd1, 0x9f, 0x2d, 0x98, 0x90, 0x95, 0xf7, 0xab, + 0x03, 0xa5, 0xfd, 0xe8, 0x44, 0x16, 0xe0, 0x0c, + 0x0e +}; +static const u8 enc_nonce048[] __initconst = { + 0x56, 0x4d, 0xee, 0x49, 0xab, 0x00, 0xd2, 0x40, + 0xfc, 0x10, 0x68, 0xc3 +}; +static const u8 enc_key048[] __initconst = { + 0xa5, 0x56, 0x9e, 0x72, 0x9a, 0x69, 0xb2, 0x4b, + 0xa6, 0xe0, 0xff, 0x15, 0xc4, 0x62, 0x78, 0x97, + 0x43, 0x68, 0x24, 0xc9, 0x41, 0xe9, 0xd0, 0x0b, + 0x2e, 0x93, 0xfd, 0xdc, 0x4b, 0xa7, 0x76, 0x57 +}; + +/* wycheproof - misc */ +static const u8 enc_input049[] __initconst = { + 0xe6, 0x01, 0xb3, 0x85, 0x57, 0x79, 0x7d, 0xa2, + 0xf8, 0xa4, 0x10, 0x6a, 0x08, 0x9d, 0x1d, 0xa6 +}; +static const u8 enc_output049[] __initconst = { + 0x29, 0x9b, 0x5d, 0x3f, 0x3d, 0x03, 0xc0, 0x87, + 0x20, 0x9a, 0x16, 0xe2, 0x85, 0x14, 0x31, 0x11, + 0x4b, 0x45, 0x4e, 0xd1, 0x98, 0xde, 0x11, 0x7e, + 0x83, 0xec, 0x49, 0xfa, 0x8d, 0x85, 0x08, 0xd6 +}; +static const u8 enc_assoc049[] __initconst = { + 0x5e, 0x64, 0x70, 0xfa, 0xcd, 0x99, 0xc1, 0xd8, + 0x1e, 0x37, 0xcd, 0x44, 0x01, 0x5f, 0xe1, 0x94, + 0x80, 0xa2, 0xa4, 0xd3, 0x35, 0x2a, 0x4f, 0xf5, + 0x60, 0xc0, 0x64, 0x0f, 0xdb, 0xda +}; +static const u8 enc_nonce049[] __initconst = { + 0xdf, 0x87, 0x13, 0xe8, 0x7e, 0xc3, 0xdb, 0xcf, + 0xad, 0x14, 0xd5, 0x3e +}; +static const u8 enc_key049[] __initconst = { + 0x56, 0x20, 0x74, 0x65, 0xb4, 0xe4, 0x8e, 0x6d, + 0x04, 0x63, 0x0f, 0x4a, 0x42, 0xf3, 0x5c, 0xfc, + 0x16, 0x3a, 0xb2, 0x89, 0xc2, 0x2a, 0x2b, 0x47, + 0x84, 0xf6, 0xf9, 0x29, 0x03, 0x30, 0xbe, 0xe0 +}; + +/* wycheproof - misc */ +static const u8 enc_input050[] __initconst = { + 0xdc, 0x9e, 0x9e, 0xaf, 0x11, 0xe3, 0x14, 0x18, + 0x2d, 0xf6, 0xa4, 0xeb, 0xa1, 0x7a, 0xec, 0x9c +}; +static const u8 enc_output050[] __initconst = { + 0x60, 0x5b, 0xbf, 0x90, 0xae, 0xb9, 0x74, 0xf6, + 0x60, 0x2b, 0xc7, 0x78, 0x05, 0x6f, 0x0d, 0xca, + 0x38, 0xea, 0x23, 0xd9, 0x90, 0x54, 0xb4, 0x6b, + 0x42, 0xff, 0xe0, 0x04, 0x12, 0x9d, 0x22, 0x04 +}; +static const u8 enc_assoc050[] __initconst = { + 0xba, 0x44, 0x6f, 0x6f, 0x9a, 0x0c, 0xed, 0x22, + 0x45, 0x0f, 0xeb, 0x10, 0x73, 0x7d, 0x90, 0x07, + 0xfd, 0x69, 0xab, 0xc1, 0x9b, 0x1d, 0x4d, 0x90, + 0x49, 0xa5, 0x55, 0x1e, 0x86, 0xec, 0x2b, 0x37 +}; +static const u8 enc_nonce050[] __initconst = { + 0x8d, 0xf4, 0xb1, 0x5a, 0x88, 0x8c, 0x33, 0x28, + 0x6a, 0x7b, 0x76, 0x51 +}; +static const u8 enc_key050[] __initconst = { + 0x39, 0x37, 0x98, 0x6a, 0xf8, 0x6d, 0xaf, 0xc1, + 0xba, 0x0c, 0x46, 0x72, 0xd8, 0xab, 0xc4, 0x6c, + 0x20, 0x70, 0x62, 0x68, 0x2d, 0x9c, 0x26, 0x4a, + 0xb0, 0x6d, 0x6c, 0x58, 0x07, 0x20, 0x51, 0x30 +}; + +/* wycheproof - misc */ +static const u8 enc_input051[] __initconst = { + 0x81, 0xce, 0x84, 0xed, 0xe9, 0xb3, 0x58, 0x59, + 0xcc, 0x8c, 0x49, 0xa8, 0xf6, 0xbe, 0x7d, 0xc6 +}; +static const u8 enc_output051[] __initconst = { + 0x7b, 0x7c, 0xe0, 0xd8, 0x24, 0x80, 0x9a, 0x70, + 0xde, 0x32, 0x56, 0x2c, 0xcf, 0x2c, 0x2b, 0xbd, + 0x15, 0xd4, 0x4a, 0x00, 0xce, 0x0d, 0x19, 0xb4, + 0x23, 0x1f, 0x92, 0x1e, 0x22, 0xbc, 0x0a, 0x43 +}; +static const u8 enc_assoc051[] __initconst = { + 0xd4, 0x1a, 0x82, 0x8d, 0x5e, 0x71, 0x82, 0x92, + 0x47, 0x02, 0x19, 0x05, 0x40, 0x2e, 0xa2, 0x57, + 0xdc, 0xcb, 0xc3, 0xb8, 0x0f, 0xcd, 0x56, 0x75, + 0x05, 0x6b, 0x68, 0xbb, 0x59, 0xe6, 0x2e, 0x88, + 0x73 +}; +static const u8 enc_nonce051[] __initconst = { + 0xbe, 0x40, 0xe5, 0xf1, 0xa1, 0x18, 0x17, 0xa0, + 0xa8, 0xfa, 0x89, 0x49 +}; +static const u8 enc_key051[] __initconst = { + 0x36, 0x37, 0x2a, 0xbc, 0xdb, 0x78, 0xe0, 0x27, + 0x96, 0x46, 0xac, 0x3d, 0x17, 0x6b, 0x96, 0x74, + 0xe9, 0x15, 0x4e, 0xec, 0xf0, 0xd5, 0x46, 0x9c, + 0x65, 0x1e, 0xc7, 0xe1, 0x6b, 0x4c, 0x11, 0x99 +}; + +/* wycheproof - misc */ +static const u8 enc_input052[] __initconst = { + 0xa6, 0x67, 0x47, 0xc8, 0x9e, 0x85, 0x7a, 0xf3, + 0xa1, 0x8e, 0x2c, 0x79, 0x50, 0x00, 0x87, 0xed +}; +static const u8 enc_output052[] __initconst = { + 0xca, 0x82, 0xbf, 0xf3, 0xe2, 0xf3, 0x10, 0xcc, + 0xc9, 0x76, 0x67, 0x2c, 0x44, 0x15, 0xe6, 0x9b, + 0x57, 0x63, 0x8c, 0x62, 0xa5, 0xd8, 0x5d, 0xed, + 0x77, 0x4f, 0x91, 0x3c, 0x81, 0x3e, 0xa0, 0x32 +}; +static const u8 enc_assoc052[] __initconst = { + 0x3f, 0x2d, 0xd4, 0x9b, 0xbf, 0x09, 0xd6, 0x9a, + 0x78, 0xa3, 0xd8, 0x0e, 0xa2, 0x56, 0x66, 0x14, + 0xfc, 0x37, 0x94, 0x74, 0x19, 0x6c, 0x1a, 0xae, + 0x84, 0x58, 0x3d, 0xa7, 0x3d, 0x7f, 0xf8, 0x5c, + 0x6f, 0x42, 0xca, 0x42, 0x05, 0x6a, 0x97, 0x92, + 0xcc, 0x1b, 0x9f, 0xb3, 0xc7, 0xd2, 0x61 +}; +static const u8 enc_nonce052[] __initconst = { + 0x84, 0xc8, 0x7d, 0xae, 0x4e, 0xee, 0x27, 0x73, + 0x0e, 0xc3, 0x5d, 0x12 +}; +static const u8 enc_key052[] __initconst = { + 0x9f, 0x14, 0x79, 0xed, 0x09, 0x7d, 0x7f, 0xe5, + 0x29, 0xc1, 0x1f, 0x2f, 0x5a, 0xdd, 0x9a, 0xaf, + 0xf4, 0xa1, 0xca, 0x0b, 0x68, 0x99, 0x7a, 0x2c, + 0xb7, 0xf7, 0x97, 0x49, 0xbd, 0x90, 0xaa, 0xf4 +}; + /* wycheproof - misc */ static const u8 enc_input053[] __initconst = { 0x25, 0x6d, 0x40, 0x88, 0x80, 0x94, 0x17, 0x83, @@ -2760,6 +3859,126 @@ static const u8 enc_key073[] __initconst };

/* wycheproof - checking for int overflows */ +static const u8 enc_input074[] __initconst = { + 0xd4, 0x50, 0x0b, 0xf0, 0x09, 0x49, 0x35, 0x51, + 0xc3, 0x80, 0xad, 0xf5, 0x2c, 0x57, 0x3a, 0x69, + 0xdf, 0x7e, 0x8b, 0x76, 0x24, 0x63, 0x33, 0x0f, + 0xac, 0xc1, 0x6a, 0x57, 0x26, 0xbe, 0x71, 0x90, + 0xc6, 0x3c, 0x5a, 0x1c, 0x92, 0x65, 0x84, 0xa0, + 0x96, 0x75, 0x68, 0x28, 0xdc, 0xdc, 0x64, 0xac, + 0xdf, 0x96, 0x3d, 0x93, 0x1b, 0xf1, 0xda, 0xe2, + 0x38, 0xf3, 0xf1, 0x57, 0x22, 0x4a, 0xc4, 0xb5, + 0x42, 0xd7, 0x85, 0xb0, 0xdd, 0x84, 0xdb, 0x6b, + 0xe3, 0xbc, 0x5a, 0x36, 0x63, 0xe8, 0x41, 0x49, + 0xff, 0xbe, 0xd0, 0x9e, 0x54, 0xf7, 0x8f, 0x16, + 0xa8, 0x22, 0x3b, 0x24, 0xcb, 0x01, 0x9f, 0x58, + 0xb2, 0x1b, 0x0e, 0x55, 0x1e, 0x7a, 0xa0, 0x73, + 0x27, 0x62, 0x95, 0x51, 0x37, 0x6c, 0xcb, 0xc3, + 0x93, 0x76, 0x71, 0xa0, 0x62, 0x9b, 0xd9, 0x5c, + 0x99, 0x15, 0xc7, 0x85, 0x55, 0x77, 0x1e, 0x7a +}; +static const u8 enc_output074[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x0b, 0x30, 0x0d, 0x8d, 0xa5, 0x6c, 0x21, 0x85, + 0x75, 0x52, 0x79, 0x55, 0x3c, 0x4c, 0x82, 0xca +}; +static const u8 enc_assoc074[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff +}; +static const u8 enc_nonce074[] __initconst = { + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x00, 0x02, 0x50, 0x6e +}; +static const u8 enc_key074[] __initconst = { + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30 +}; + +/* wycheproof - checking for int overflows */ +static const u8 enc_input075[] __initconst = { + 0x7d, 0xe8, 0x7f, 0x67, 0x29, 0x94, 0x52, 0x75, + 0xd0, 0x65, 0x5d, 0xa4, 0xc7, 0xfd, 0xe4, 0x56, + 0x9e, 0x16, 0xf1, 0x11, 0xb5, 0xeb, 0x26, 0xc2, + 0x2d, 0x85, 0x9e, 0x3f, 0xf8, 0x22, 0xec, 0xed, + 0x3a, 0x6d, 0xd9, 0xa6, 0x0f, 0x22, 0x95, 0x7f, + 0x7b, 0x7c, 0x85, 0x7e, 0x88, 0x22, 0xeb, 0x9f, + 0xe0, 0xb8, 0xd7, 0x02, 0x21, 0x41, 0xf2, 0xd0, + 0xb4, 0x8f, 0x4b, 0x56, 0x12, 0xd3, 0x22, 0xa8, + 0x8d, 0xd0, 0xfe, 0x0b, 0x4d, 0x91, 0x79, 0x32, + 0x4f, 0x7c, 0x6c, 0x9e, 0x99, 0x0e, 0xfb, 0xd8, + 0x0e, 0x5e, 0xd6, 0x77, 0x58, 0x26, 0x49, 0x8b, + 0x1e, 0xfe, 0x0f, 0x71, 0xa0, 0xf3, 0xec, 0x5b, + 0x29, 0xcb, 0x28, 0xc2, 0x54, 0x0a, 0x7d, 0xcd, + 0x51, 0xb7, 0xda, 0xae, 0xe0, 0xff, 0x4a, 0x7f, + 0x3a, 0xc1, 0xee, 0x54, 0xc2, 0x9e, 0xe4, 0xc1, + 0x70, 0xde, 0x40, 0x8f, 0x66, 0x69, 0x21, 0x94 +}; +static const u8 enc_output075[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xc5, 0x78, 0xe2, 0xaa, 0x44, 0xd3, 0x09, 0xb7, + 0xb6, 0xa5, 0x19, 0x3b, 0xdc, 0x61, 0x18, 0xf5 +}; +static const u8 enc_assoc075[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff +}; +static const u8 enc_nonce075[] __initconst = { + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x00, 0x03, 0x18, 0xa5 +}; +static const u8 enc_key075[] __initconst = { + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30 +}; + +/* wycheproof - checking for int overflows */ static const u8 enc_input076[] __initconst = { 0x1b, 0x99, 0x6f, 0x9a, 0x3c, 0xcc, 0x67, 0x85, 0xde, 0x22, 0xff, 0x5b, 0x8a, 0xdd, 0x95, 0x02, @@ -3349,6 +4568,286 @@ static const u8 enc_key085[] __initconst 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f };

+/* wycheproof - special case tag */ +static const u8 enc_input086[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output086[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f +}; +static const u8 enc_assoc086[] __initconst = { + 0x85, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xa6, 0x90, 0x2f, 0xcb, 0xc8, 0x83, 0xbb, 0xc1, + 0x80, 0xb2, 0x56, 0xae, 0x34, 0xad, 0x7f, 0x00 +}; +static const u8 enc_nonce086[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key086[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - special case tag */ +static const u8 enc_input087[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output087[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +static const u8 enc_assoc087[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x24, 0x7e, 0x50, 0x64, 0x2a, 0x1c, 0x0a, 0x2f, + 0x8f, 0x77, 0x21, 0x96, 0x09, 0xdb, 0xa9, 0x58 +}; +static const u8 enc_nonce087[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key087[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - special case tag */ +static const u8 enc_input088[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output088[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff +}; +static const u8 enc_assoc088[] __initconst = { + 0x7c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xd9, 0xe7, 0x2c, 0x06, 0x4a, 0xc8, 0x96, 0x1f, + 0x3f, 0xa5, 0x85, 0xe0, 0xe2, 0xab, 0xd6, 0x00 +}; +static const u8 enc_nonce088[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key088[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - special case tag */ +static const u8 enc_input089[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output089[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80 +}; +static const u8 enc_assoc089[] __initconst = { + 0x65, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x95, 0xaf, 0x0f, 0x4d, 0x0b, 0x68, 0x6e, 0xae, + 0xcc, 0xca, 0x43, 0x07, 0xd5, 0x96, 0xf5, 0x02 +}; +static const u8 enc_nonce089[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key089[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - special case tag */ +static const u8 enc_input090[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output090[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f, + 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0x7f +}; +static const u8 enc_assoc090[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x85, 0x40, 0xb4, 0x64, 0x35, 0x77, 0x07, 0xbe, + 0x3a, 0x39, 0xd5, 0x5c, 0x34, 0xf8, 0xbc, 0xb3 +}; +static const u8 enc_nonce090[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key090[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - special case tag */ +static const u8 enc_input091[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output091[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 +}; +static const u8 enc_assoc091[] __initconst = { + 0x4f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x66, 0x23, 0xd9, 0x90, 0xb8, 0x98, 0xd8, 0x30, + 0xd2, 0x12, 0xaf, 0x23, 0x83, 0x33, 0x07, 0x01 +}; +static const u8 enc_nonce091[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key091[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + +/* wycheproof - special case tag */ +static const u8 enc_input092[] __initconst = { + 0x9a, 0x49, 0xc4, 0x0f, 0x8b, 0x48, 0xd7, 0xc6, + 0x6d, 0x1d, 0xb4, 0xe5, 0x3f, 0x20, 0xf2, 0xdd, + 0x4a, 0xaa, 0x24, 0x1d, 0xda, 0xb2, 0x6b, 0x5b, + 0xc0, 0xe2, 0x18, 0xb7, 0x2c, 0x33, 0x90, 0xf2, + 0xdf, 0x3e, 0xbd, 0x01, 0x76, 0x70, 0x44, 0x19, + 0x97, 0x2b, 0xcd, 0xbc, 0x6b, 0xbc, 0xb3, 0xe4, + 0xe7, 0x4a, 0x71, 0x52, 0x8e, 0xf5, 0x12, 0x63, + 0xce, 0x24, 0xe0, 0xd5, 0x75, 0xe0, 0xe4, 0x4d +}; +static const u8 enc_output092[] __initconst = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +static const u8 enc_assoc092[] __initconst = { + 0x83, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x5f, 0x16, 0xd0, 0x9f, 0x17, 0x78, 0x72, 0x11, + 0xb7, 0xd4, 0x84, 0xe0, 0x24, 0xf8, 0x97, 0x01 +}; +static const u8 enc_nonce092[] __initconst = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b +}; +static const u8 enc_key092[] __initconst = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f +}; + /* wycheproof - edge case intermediate sums in poly1305 */ static const u8 enc_input093[] __initconst = { 0x00, 0x52, 0x35, 0xd2, 0xa9, 0x19, 0xf2, 0x8d, @@ -4455,6 +5954,86 @@ chacha20poly1305_enc_vectors[] __initcon sizeof(enc_input011), sizeof(enc_assoc011), sizeof(enc_nonce011) }, { enc_input012, enc_output012, enc_assoc012, enc_nonce012, enc_key012, sizeof(enc_input012), sizeof(enc_assoc012), sizeof(enc_nonce012) }, + { enc_input013, enc_output013, enc_assoc013, enc_nonce013, enc_key013, + sizeof(enc_input013), sizeof(enc_assoc013), sizeof(enc_nonce013) }, + { enc_input014, enc_output014, enc_assoc014, enc_nonce014, enc_key014, + sizeof(enc_input014), sizeof(enc_assoc014), sizeof(enc_nonce014) }, + { enc_input015, enc_output015, enc_assoc015, enc_nonce015, enc_key015, + sizeof(enc_input015), sizeof(enc_assoc015), sizeof(enc_nonce015) }, + { enc_input016, enc_output016, enc_assoc016, enc_nonce016, enc_key016, + sizeof(enc_input016), sizeof(enc_assoc016), sizeof(enc_nonce016) }, + { enc_input017, enc_output017, enc_assoc017, enc_nonce017, enc_key017, + sizeof(enc_input017), sizeof(enc_assoc017), sizeof(enc_nonce017) }, + { enc_input018, enc_output018, enc_assoc018, enc_nonce018, enc_key018, + sizeof(enc_input018), sizeof(enc_assoc018), sizeof(enc_nonce018) }, + { enc_input019, enc_output019, enc_assoc019, enc_nonce019, enc_key019, + sizeof(enc_input019), sizeof(enc_assoc019), sizeof(enc_nonce019) }, + { enc_input020, enc_output020, enc_assoc020, enc_nonce020, enc_key020, + sizeof(enc_input020), sizeof(enc_assoc020), sizeof(enc_nonce020) }, + { enc_input021, enc_output021, enc_assoc021, enc_nonce021, enc_key021, + sizeof(enc_input021), sizeof(enc_assoc021), sizeof(enc_nonce021) }, + { enc_input022, enc_output022, enc_assoc022, enc_nonce022, enc_key022, + sizeof(enc_input022), sizeof(enc_assoc022), sizeof(enc_nonce022) }, + { enc_input023, enc_output023, enc_assoc023, enc_nonce023, enc_key023, + sizeof(enc_input023), sizeof(enc_assoc023), sizeof(enc_nonce023) }, + { enc_input024, enc_output024, enc_assoc024, enc_nonce024, enc_key024, + sizeof(enc_input024), sizeof(enc_assoc024), sizeof(enc_nonce024) }, + { enc_input025, enc_output025, enc_assoc025, enc_nonce025, enc_key025, + sizeof(enc_input025), sizeof(enc_assoc025), sizeof(enc_nonce025) }, + { enc_input026, enc_output026, enc_assoc026, enc_nonce026, enc_key026, + sizeof(enc_input026), sizeof(enc_assoc026), sizeof(enc_nonce026) }, + { enc_input027, enc_output027, enc_assoc027, enc_nonce027, enc_key027, + sizeof(enc_input027), sizeof(enc_assoc027), sizeof(enc_nonce027) }, + { enc_input028, enc_output028, enc_assoc028, enc_nonce028, enc_key028, + sizeof(enc_input028), sizeof(enc_assoc028), sizeof(enc_nonce028) }, + { enc_input029, enc_output029, enc_assoc029, enc_nonce029, enc_key029, + sizeof(enc_input029), sizeof(enc_assoc029), sizeof(enc_nonce029) }, + { enc_input030, enc_output030, enc_assoc030, enc_nonce030, enc_key030, + sizeof(enc_input030), sizeof(enc_assoc030), sizeof(enc_nonce030) }, + { enc_input031, enc_output031, enc_assoc031, enc_nonce031, enc_key031, + sizeof(enc_input031), sizeof(enc_assoc031), sizeof(enc_nonce031) }, + { enc_input032, enc_output032, enc_assoc032, enc_nonce032, enc_key032, + sizeof(enc_input032), sizeof(enc_assoc032), sizeof(enc_nonce032) }, + { enc_input033, enc_output033, enc_assoc033, enc_nonce033, enc_key033, + sizeof(enc_input033), sizeof(enc_assoc033), sizeof(enc_nonce033) }, + { enc_input034, enc_output034, enc_assoc034, enc_nonce034, enc_key034, + sizeof(enc_input034), sizeof(enc_assoc034), sizeof(enc_nonce034) }, + { enc_input035, enc_output035, enc_assoc035, enc_nonce035, enc_key035, + sizeof(enc_input035), sizeof(enc_assoc035), sizeof(enc_nonce035) }, + { enc_input036, enc_output036, enc_assoc036, enc_nonce036, enc_key036, + sizeof(enc_input036), sizeof(enc_assoc036), sizeof(enc_nonce036) }, + { enc_input037, enc_output037, enc_assoc037, enc_nonce037, enc_key037, + sizeof(enc_input037), sizeof(enc_assoc037), sizeof(enc_nonce037) }, + { enc_input038, enc_output038, enc_assoc038, enc_nonce038, enc_key038, + sizeof(enc_input038), sizeof(enc_assoc038), sizeof(enc_nonce038) }, + { enc_input039, enc_output039, enc_assoc039, enc_nonce039, enc_key039, + sizeof(enc_input039), sizeof(enc_assoc039), sizeof(enc_nonce039) }, + { enc_input040, enc_output040, enc_assoc040, enc_nonce040, enc_key040, + sizeof(enc_input040), sizeof(enc_assoc040), sizeof(enc_nonce040) }, + { enc_input041, enc_output041, enc_assoc041, enc_nonce041, enc_key041, + sizeof(enc_input041), sizeof(enc_assoc041), sizeof(enc_nonce041) }, + { enc_input042, enc_output042, enc_assoc042, enc_nonce042, enc_key042, + sizeof(enc_input042), sizeof(enc_assoc042), sizeof(enc_nonce042) }, + { enc_input043, enc_output043, enc_assoc043, enc_nonce043, enc_key043, + sizeof(enc_input043), sizeof(enc_assoc043), sizeof(enc_nonce043) }, + { enc_input044, enc_output044, enc_assoc044, enc_nonce044, enc_key044, + sizeof(enc_input044), sizeof(enc_assoc044), sizeof(enc_nonce044) }, + { enc_input045, enc_output045, enc_assoc045, enc_nonce045, enc_key045, + sizeof(enc_input045), sizeof(enc_assoc045), sizeof(enc_nonce045) }, + { enc_input046, enc_output046, enc_assoc046, enc_nonce046, enc_key046, + sizeof(enc_input046), sizeof(enc_assoc046), sizeof(enc_nonce046) }, + { enc_input047, enc_output047, enc_assoc047, enc_nonce047, enc_key047, + sizeof(enc_input047), sizeof(enc_assoc047), sizeof(enc_nonce047) }, + { enc_input048, enc_output048, enc_assoc048, enc_nonce048, enc_key048, + sizeof(enc_input048), sizeof(enc_assoc048), sizeof(enc_nonce048) }, + { enc_input049, enc_output049, enc_assoc049, enc_nonce049, enc_key049, + sizeof(enc_input049), sizeof(enc_assoc049), sizeof(enc_nonce049) }, + { enc_input050, enc_output050, enc_assoc050, enc_nonce050, enc_key050, + sizeof(enc_input050), sizeof(enc_assoc050), sizeof(enc_nonce050) }, + { enc_input051, enc_output051, enc_assoc051, enc_nonce051, enc_key051, + sizeof(enc_input051), sizeof(enc_assoc051), sizeof(enc_nonce051) }, + { enc_input052, enc_output052, enc_assoc052, enc_nonce052, enc_key052, + sizeof(enc_input052), sizeof(enc_assoc052), sizeof(enc_nonce052) }, { enc_input053, enc_output053, enc_assoc053, enc_nonce053, enc_key053, sizeof(enc_input053), sizeof(enc_assoc053), sizeof(enc_nonce053) }, { enc_input054, enc_output054, enc_assoc054, enc_nonce054, enc_key054, @@ -4497,6 +6076,10 @@ chacha20poly1305_enc_vectors[] __initcon sizeof(enc_input072), sizeof(enc_assoc072), sizeof(enc_nonce072) }, { enc_input073, enc_output073, enc_assoc073, enc_nonce073, enc_key073, sizeof(enc_input073), sizeof(enc_assoc073), sizeof(enc_nonce073) }, + { enc_input074, enc_output074, enc_assoc074, enc_nonce074, enc_key074, + sizeof(enc_input074), sizeof(enc_assoc074), sizeof(enc_nonce074) }, + { enc_input075, enc_output075, enc_assoc075, enc_nonce075, enc_key075, + sizeof(enc_input075), sizeof(enc_assoc075), sizeof(enc_nonce075) }, { enc_input076, enc_output076, enc_assoc076, enc_nonce076, enc_key076, sizeof(enc_input076), sizeof(enc_assoc076), sizeof(enc_nonce076) }, { enc_input077, enc_output077, enc_assoc077, enc_nonce077, enc_key077, @@ -4517,6 +6100,20 @@ chacha20poly1305_enc_vectors[] __initcon sizeof(enc_input084), sizeof(enc_assoc084), sizeof(enc_nonce084) }, { enc_input085, enc_output085, enc_assoc085, enc_nonce085, enc_key085, sizeof(enc_input085), sizeof(enc_assoc085), sizeof(enc_nonce085) }, + { enc_input086, enc_output086, enc_assoc086, enc_nonce086, enc_key086, + sizeof(enc_input086), sizeof(enc_assoc086), sizeof(enc_nonce086) }, + { enc_input087, enc_output087, enc_assoc087, enc_nonce087, enc_key087, + sizeof(enc_input087), sizeof(enc_assoc087), sizeof(enc_nonce087) }, + { enc_input088, enc_output088, enc_assoc088, enc_nonce088, enc_key088, + sizeof(enc_input088), sizeof(enc_assoc088), sizeof(enc_nonce088) }, + { enc_input089, enc_output089, enc_assoc089, enc_nonce089, enc_key089, + sizeof(enc_input089), sizeof(enc_assoc089), sizeof(enc_nonce089) }, + { enc_input090, enc_output090, enc_assoc090, enc_nonce090, enc_key090, + sizeof(enc_input090), sizeof(enc_assoc090), sizeof(enc_nonce090) }, + { enc_input091, enc_output091, enc_assoc091, enc_nonce091, enc_key091, + sizeof(enc_input091), sizeof(enc_assoc091), sizeof(enc_nonce091) }, + { enc_input092, enc_output092, enc_assoc092, enc_nonce092, enc_key092, + sizeof(enc_input092), sizeof(enc_assoc092), sizeof(enc_nonce092) }, { enc_input093, enc_output093, enc_assoc093, enc_nonce093, enc_key093, sizeof(enc_input093), sizeof(enc_assoc093), sizeof(enc_nonce093) }, { enc_input094, enc_output094, enc_assoc094, enc_nonce094, enc_key094, @@ -7224,6 +8821,43 @@ xchacha20poly1305_dec_vectors[] __initco sizeof(xdec_input001), sizeof(xdec_assoc001), sizeof(xdec_nonce001) } };

+/* This is for the selftests-only, since it is only useful for the purpose of + * testing the underlying primitives and interactions. + */ +static void __init +chacha20poly1305_encrypt_bignonce(u8 *dst, const u8 *src, const size_t src_len, + const u8 *ad, const size_t ad_len, + const u8 nonce[12], + const u8 key[CHACHA20POLY1305_KEY_SIZE]) +{ + const u8 *pad0 = page_address(ZERO_PAGE(0)); + struct poly1305_desc_ctx poly1305_state; + u32 chacha20_state[CHACHA_STATE_WORDS]; + union { + u8 block0[POLY1305_KEY_SIZE]; + __le64 lens[2]; + } b = {{ 0 }}; + u8 bottom_row[16] = { 0 }; + u32 le_key[8]; + int i; + + memcpy(&bottom_row[4], nonce, 12); + for (i = 0; i < 8; ++i) + le_key[i] = get_unaligned_le32(key + sizeof(le_key[i]) * i); + chacha_init(chacha20_state, le_key, bottom_row); + chacha20_crypt(chacha20_state, b.block0, b.block0, sizeof(b.block0)); + poly1305_init(&poly1305_state, b.block0); + poly1305_update(&poly1305_state, ad, ad_len); + poly1305_update(&poly1305_state, pad0, (0x10 - ad_len) & 0xf); + chacha20_crypt(chacha20_state, dst, src, src_len); + poly1305_update(&poly1305_state, dst, src_len); + poly1305_update(&poly1305_state, pad0, (0x10 - src_len) & 0xf); + b.lens[0] = cpu_to_le64(ad_len); + b.lens[1] = cpu_to_le64(src_len); + poly1305_update(&poly1305_state, (u8 *)b.lens, sizeof(b.lens)); + poly1305_final(&poly1305_state, dst + src_len); +} + static void __init chacha20poly1305_selftest_encrypt(u8 *dst, const u8 *src, const size_t src_len, const u8 *ad, const size_t ad_len, @@ -7233,6 +8867,9 @@ chacha20poly1305_selftest_encrypt(u8 *ds if (nonce_len == 8) chacha20poly1305_encrypt(dst, src, src_len, ad, ad_len, get_unaligned_le64(nonce), key); + else if (nonce_len == 12) + chacha20poly1305_encrypt_bignonce(dst, src, src_len, ad, + ad_len, nonce, key); else BUG(); } @@ -7248,14 +8885,14 @@ decryption_success(bool func_ret, bool e bool __init chacha20poly1305_selftest(void) { enum { MAXIMUM_TEST_BUFFER_LEN = 1UL << 12 }; - size_t i; - u8 *computed_output = NULL, *heap_src = NULL; - struct scatterlist sg_src; + size_t i, j, k, total_len; + u8 *computed_output = NULL, *input = NULL; bool success = true, ret; + struct scatterlist sg_src[3];

- heap_src = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL); computed_output = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL); - if (!heap_src || !computed_output) { + input = kmalloc(MAXIMUM_TEST_BUFFER_LEN, GFP_KERNEL); + if (!computed_output || !input) { pr_err("chacha20poly1305 self-test malloc: FAIL\n"); success = false; goto out; @@ -7284,17 +8921,17 @@ bool __init chacha20poly1305_selftest(vo for (i = 0; i < ARRAY_SIZE(chacha20poly1305_enc_vectors); ++i) { if (chacha20poly1305_enc_vectors[i].nlen != 8) continue; - memcpy(heap_src, chacha20poly1305_enc_vectors[i].input, + memcpy(computed_output, chacha20poly1305_enc_vectors[i].input, chacha20poly1305_enc_vectors[i].ilen); - sg_init_one(&sg_src, heap_src, + sg_init_one(sg_src, computed_output, chacha20poly1305_enc_vectors[i].ilen + POLY1305_DIGEST_SIZE); - chacha20poly1305_encrypt_sg_inplace(&sg_src, + ret = chacha20poly1305_encrypt_sg_inplace(sg_src, chacha20poly1305_enc_vectors[i].ilen, chacha20poly1305_enc_vectors[i].assoc, chacha20poly1305_enc_vectors[i].alen, get_unaligned_le64(chacha20poly1305_enc_vectors[i].nonce), chacha20poly1305_enc_vectors[i].key); - if (memcmp(heap_src, + if (!ret || memcmp(computed_output, chacha20poly1305_enc_vectors[i].output, chacha20poly1305_enc_vectors[i].ilen + POLY1305_DIGEST_SIZE)) { @@ -7326,11 +8963,11 @@ bool __init chacha20poly1305_selftest(vo }

for (i = 0; i < ARRAY_SIZE(chacha20poly1305_dec_vectors); ++i) { - memcpy(heap_src, chacha20poly1305_dec_vectors[i].input, + memcpy(computed_output, chacha20poly1305_dec_vectors[i].input, chacha20poly1305_dec_vectors[i].ilen); - sg_init_one(&sg_src, heap_src, + sg_init_one(sg_src, computed_output, chacha20poly1305_dec_vectors[i].ilen); - ret = chacha20poly1305_decrypt_sg_inplace(&sg_src, + ret = chacha20poly1305_decrypt_sg_inplace(sg_src, chacha20poly1305_dec_vectors[i].ilen, chacha20poly1305_dec_vectors[i].assoc, chacha20poly1305_dec_vectors[i].alen, @@ -7338,7 +8975,7 @@ bool __init chacha20poly1305_selftest(vo chacha20poly1305_dec_vectors[i].key); if (!decryption_success(ret, chacha20poly1305_dec_vectors[i].failure, - memcmp(heap_src, chacha20poly1305_dec_vectors[i].output, + memcmp(computed_output, chacha20poly1305_dec_vectors[i].output, chacha20poly1305_dec_vectors[i].ilen - POLY1305_DIGEST_SIZE))) { pr_err("chacha20poly1305 sg decryption self-test %zu: FAIL\n", @@ -7365,6 +9002,7 @@ bool __init chacha20poly1305_selftest(vo success = false; } } + for (i = 0; i < ARRAY_SIZE(xchacha20poly1305_dec_vectors); ++i) { memset(computed_output, 0, MAXIMUM_TEST_BUFFER_LEN); ret = xchacha20poly1305_decrypt(computed_output, @@ -7386,8 +9024,54 @@ bool __init chacha20poly1305_selftest(vo } }

+ for (total_len = POLY1305_DIGEST_SIZE; IS_ENABLED(DEBUG_CHACHA20POLY1305_SLOW_CHUNK_TEST) + && total_len <= 1 << 10; ++total_len) { + for (i = 0; i <= total_len; ++i) { + for (j = i; j <= total_len; ++j) { + sg_init_table(sg_src, 3); + sg_set_buf(&sg_src[0], input, i); + sg_set_buf(&sg_src[1], input + i, j - i); + sg_set_buf(&sg_src[2], input + j, total_len - j); + memset(computed_output, 0, total_len); + memset(input, 0, total_len); + + if (!chacha20poly1305_encrypt_sg_inplace(sg_src, + total_len - POLY1305_DIGEST_SIZE, NULL, 0, + 0, enc_key001)) + goto chunkfail; + chacha20poly1305_encrypt(computed_output, + computed_output, + total_len - POLY1305_DIGEST_SIZE, NULL, 0, 0, + enc_key001); + if (memcmp(computed_output, input, total_len)) + goto chunkfail; + if (!chacha20poly1305_decrypt(computed_output, + input, total_len, NULL, 0, 0, enc_key001)) + goto chunkfail; + for (k = 0; k < total_len - POLY1305_DIGEST_SIZE; ++k) { + if (computed_output[k]) + goto chunkfail; + } + if (!chacha20poly1305_decrypt_sg_inplace(sg_src, + total_len, NULL, 0, 0, enc_key001)) + goto chunkfail; + for (k = 0; k < total_len - POLY1305_DIGEST_SIZE; ++k) { + if (input[k]) + goto chunkfail; + } + continue; + + chunkfail: + pr_err("chacha20poly1305 chunked self-test %zu/%zu/%zu: FAIL\n", + total_len, i, j); + success = false; + } + + } + } + out: - kfree(heap_src); kfree(computed_output); + kfree(input); return success; }

From: Rahul Lakkireddy rahul.lakkireddy@chelsio.com

[ Upstream commit 7affd80802afb6ca92dba47d768632fbde365241 ]

commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")

However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop.

So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput.

Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy rahul.lakkireddy@chelsio.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 42 +------------------------------ 1 file changed, 2 insertions(+), 40 deletions(-)

--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -1486,16 +1486,7 @@ static netdev_tx_t cxgb4_eth_xmit(struct * has opened up. */ eth_txq_stop(q); - - /* If we're using the SGE Doorbell Queue Timer facility, we - * don't need to ask the Firmware to send us Egress Queue CIDX - * Updates: the Hardware will do this automatically. And - * since we send the Ingress Queue CIDX Updates to the - * corresponding Ethernet Response Queue, we'll get them very - * quickly. - */ - if (!q->dbqt) - wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; + wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; }

wr = (void *)&q->q.desc[q->q.pidx]; @@ -1805,16 +1796,7 @@ static netdev_tx_t cxgb4_vf_eth_xmit(str * has opened up. */ eth_txq_stop(txq); - - /* If we're using the SGE Doorbell Queue Timer facility, we - * don't need to ask the Firmware to send us Egress Queue CIDX - * Updates: the Hardware will do this automatically. And - * since we send the Ingress Queue CIDX Updates to the - * corresponding Ethernet Response Queue, we'll get them very - * quickly. - */ - if (!txq->dbqt) - wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; + wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F; }

/* Start filling in our Work Request. Note that we do _not_ handle @@ -3370,26 +3352,6 @@ static void t4_tx_completion_handler(str }

txq = &s->ethtxq[pi->first_qset + rspq->idx]; - - /* We've got the Hardware Consumer Index Update in the Egress Update - * message. If we're using the SGE Doorbell Queue Timer mechanism, - * these Egress Update messages will be our sole CIDX Updates we get - * since we don't want to chew up PCIe bandwidth for both Ingress - * Messages and Status Page writes. However, The code which manages - * reclaiming successfully DMA'ed TX Work Requests uses the CIDX value - * stored in the Status Page at the end of the TX Queue. It's easiest - * to simply copy the CIDX Update value from the Egress Update message - * to the Status Page. Also note that no Endian issues need to be - * considered here since both are Big Endian and we're just copying - * bytes consistently ... - */ - if (txq->dbqt) { - struct cpl_sge_egr_update *egr; - - egr = (struct cpl_sge_egr_update *)rsp; - WRITE_ONCE(txq->q.stat->cidx, egr->cidx); - } - t4_sge_eth_txq_egress_update(adapter, txq, -1); }

From: Florian Westphal fw@strlen.de

[ Upstream commit 0fda7600c2e174fe27e9cf02e78e345226e441fa ]

The debug check must be done after unregister_netdevice_many() call -- the list_del() for this is done inside .ndo_stop.

Fixes: 2843a25348f8 ("geneve: speedup geneve tunnels dismantle") Reported-and-tested-by: syzbot+68a8ed58e3d17c700de5@syzkaller.appspotmail.com Cc: Haishuang Yan yanhaishuang@cmss.chinamobile.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/geneve.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1845,8 +1845,6 @@ static void geneve_destroy_tunnels(struc if (!net_eq(dev_net(geneve->dev), net)) unregister_netdevice_queue(geneve->dev, head); } - - WARN_ON_ONCE(!list_empty(&gn->sock_list)); }

static void __net_exit geneve_exit_batch_net(struct list_head *net_list) @@ -1861,6 +1859,12 @@ static void __net_exit geneve_exit_batch /* unregister the devices gathered above */ unregister_netdevice_many(&list); rtnl_unlock(); + + list_for_each_entry(net, net_list, exit_list) { + const struct geneve_net *gn = net_generic(net, geneve_net_id); + + WARN_ON_ONCE(!list_empty(&gn->sock_list)); + } }

static struct pernet_operations geneve_net_ops = {

From: Qian Cai cai@lca.pw

[ Upstream commit dddeb30bfc43926620f954266fd12c65a7206f07 ]

There is a place,

inet_dump_fib() fib_table_dump fn_trie_dump_leaf() hlist_for_each_entry_rcu()

without rcu_read_lock() will trigger a warning,

WARNING: suspicious RCU usage ----------------------------- net/ipv4/fib_trie.c:2216 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/1923: #0: ffffffff8ce76e40 (rtnl_mutex){+.+.}, at: netlink_dump+0xd6/0x840

Call Trace: dump_stack+0xa1/0xea lockdep_rcu_suspicious+0x103/0x10d fn_trie_dump_leaf+0x581/0x590 fib_table_dump+0x15f/0x220 inet_dump_fib+0x4ad/0x5d0 netlink_dump+0x350/0x840 __netlink_dump_start+0x315/0x3e0 rtnetlink_rcv_msg+0x4d1/0x720 netlink_rcv_skb+0xf0/0x220 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x306/0x460 netlink_sendmsg+0x44b/0x770 __sys_sendto+0x259/0x270 __x64_sys_sendto+0x80/0xa0 do_syscall_64+0x69/0xf4 entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fixes: 18a8021a7be3 ("net/ipv4: Plumb support for filtering route dumps") Signed-off-by: Qian Cai cai@lca.pw Reviewed-by: David Ahern dsahern@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/fib_frontend.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -997,7 +997,9 @@ static int inet_dump_fib(struct sk_buff return -ENOENT; }

+ rcu_read_lock(); err = fib_table_dump(tb, skb, cb, &filter); + rcu_read_unlock(); return skb->len ? : err; }

From: Ido Schimmel idosch@mellanox.com

[ Upstream commit 6002059d7882c3512e6ac52fa82424272ddfcd5c ]

During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state.

However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load:

[ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110

Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging.

Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel idosch@mellanox.com Reviewed-by: Jiri Pirko jiri@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlxsw/pci.c | 50 +++++++++++++++++++++++------- 1 file changed, 39 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1322,36 +1322,64 @@ static void mlxsw_pci_mbox_free(struct m mbox->mapaddr); }

-static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci, - const struct pci_device_id *id) +static int mlxsw_pci_sys_ready_wait(struct mlxsw_pci *mlxsw_pci, + const struct pci_device_id *id, + u32 *p_sys_status) { unsigned long end; - char mrsr_pl[MLXSW_REG_MRSR_LEN]; - int err; + u32 val;

- mlxsw_reg_mrsr_pack(mrsr_pl); - err = mlxsw_reg_write(mlxsw_pci->core, MLXSW_REG(mrsr), mrsr_pl); - if (err) - return err; if (id->device == PCI_DEVICE_ID_MELLANOX_SWITCHX2) { msleep(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS); return 0; }

- /* We must wait for the HW to become responsive once again. */ + /* We must wait for the HW to become responsive. */ msleep(MLXSW_PCI_SW_RESET_WAIT_MSECS);

end = jiffies + msecs_to_jiffies(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS); do { - u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY); - + val = mlxsw_pci_read32(mlxsw_pci, FW_READY); if ((val & MLXSW_PCI_FW_READY_MASK) == MLXSW_PCI_FW_READY_MAGIC) return 0; cond_resched(); } while (time_before(jiffies, end)); + + *p_sys_status = val & MLXSW_PCI_FW_READY_MASK; + return -EBUSY; }

+static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci, + const struct pci_device_id *id) +{ + struct pci_dev *pdev = mlxsw_pci->pdev; + char mrsr_pl[MLXSW_REG_MRSR_LEN]; + u32 sys_status; + int err; + + err = mlxsw_pci_sys_ready_wait(mlxsw_pci, id, &sys_status); + if (err) { + dev_err(&pdev->dev, "Failed to reach system ready status before reset. Status is 0x%x\n", + sys_status); + return err; + } + + mlxsw_reg_mrsr_pack(mrsr_pl); + err = mlxsw_reg_write(mlxsw_pci->core, MLXSW_REG(mrsr), mrsr_pl); + if (err) + return err; + + err = mlxsw_pci_sys_ready_wait(mlxsw_pci, id, &sys_status); + if (err) { + dev_err(&pdev->dev, "Failed to reach system ready status after reset. Status is 0x%x\n", + sys_status); + return err; + } + + return 0; +} + static int mlxsw_pci_alloc_irq_vectors(struct mlxsw_pci *mlxsw_pci) { int err;

From: Bruno Meneguele bmeneg@redhat.com

[ Upstream commit 13d0f7b814d9b4c67e60d8c2820c86ea181e7d99 ]

The bpfilter UMH code was recently changed to log its informative messages to /dev/kmsg, however this interface doesn't support SEEK_CUR yet, used by dprintf(). As result dprintf() returns -EINVAL and doesn't log anything.

However there already had some discussions about supporting SEEK_CUR into /dev/kmsg interface in the past it wasn't concluded. Since the only user of that from userspace perspective inside the kernel is the bpfilter UMH (userspace) module it's better to correct it here instead waiting a conclusion on the interface.

Fixes: 36c4357c63f3 ("net: bpfilter: print umh messages to /dev/kmsg") Signed-off-by: Bruno Meneguele bmeneg@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/bpfilter/main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/net/bpfilter/main.c +++ b/net/bpfilter/main.c @@ -10,7 +10,7 @@ #include <asm/unistd.h> #include "msgfmt.h"

-int debug_fd; +FILE *debug_f;

static int handle_get_cmd(struct mbox_request *cmd) { @@ -35,9 +35,10 @@ static void loop(void) struct mbox_reply reply; int n;

+ fprintf(debug_f, "testing the buffer\n"); n = read(0, &req, sizeof(req)); if (n != sizeof(req)) { - dprintf(debug_fd, "invalid request %d\n", n); + fprintf(debug_f, "invalid request %d\n", n); return; }

@@ -47,7 +48,7 @@ static void loop(void)

n = write(1, &reply, sizeof(reply)); if (n != sizeof(reply)) { - dprintf(debug_fd, "reply failed %d\n", n); + fprintf(debug_f, "reply failed %d\n", n); return; } } @@ -55,9 +56,10 @@ static void loop(void)

int main(void) { - debug_fd = open("/dev/kmsg", 00000002); - dprintf(debug_fd, "Started bpfilter\n"); + debug_f = fopen("/dev/kmsg", "w"); + setvbuf(debug_f, 0, _IOLBF, 0); + fprintf(debug_f, "Started bpfilter\n"); loop(); - close(debug_fd); + fclose(debug_f); return 0; }

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]

When both the switch and the bridge are learning about new addresses, switch ports attached to the bridge would see duplicate ARP frames because both entities would attempt to send them.

Fixes: 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler") Reported-by: Maxime Bizon mbizon@freebox.fr Signed-off-by: Florian Fainelli f.fainelli@gmail.com Reviewed-by: Vivien Didelot vivien.didelot@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/tag_brcm.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/dsa/tag_brcm.c +++ b/net/dsa/tag_brcm.c @@ -140,6 +140,8 @@ static struct sk_buff *brcm_tag_rcv_ll(s /* Remove Broadcom tag and update checksum */ skb_pull_rcsum(skb, BRCM_TAG_LEN);

+ skb->offload_fwd_mark = 1; + return skb; } #endif

From: Vladimir Oltean vladimir.oltean@nxp.com

[ Upstream commit e80f40cbe4dd51371818e967d40da8fe305db5e4 ]

Not only did this wheel did not need reinventing, but there is also an issue with it: It doesn't remove the VLAN header in a way that preserves the L2 payload checksum when that is being provided by the DSA master hw. It should recalculate checksum both for the push, before removing the header, and for the pull afterwards. But the current implementation is quite dizzying, with pulls followed immediately afterwards by pushes, the memmove is done before the push, etc. This makes a DSA master with RX checksumming offload to print stack traces with the infamous 'hw csum failure' message.

So remove the dsa_8021q_remove_header function and replace it with something that actually works with inet checksumming.

Fixes: d461933638ae ("net: dsa: tag_8021q: Create helper function for removing VLAN header") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/dsa/8021q.h | 7 ------- net/dsa/tag_8021q.c | 43 ------------------------------------------- net/dsa/tag_sja1105.c | 19 +++++++++---------- 3 files changed, 9 insertions(+), 60 deletions(-)

--- a/include/linux/dsa/8021q.h +++ b/include/linux/dsa/8021q.h @@ -28,8 +28,6 @@ int dsa_8021q_rx_switch_id(u16 vid);

int dsa_8021q_rx_source_port(u16 vid);

-struct sk_buff *dsa_8021q_remove_header(struct sk_buff *skb); - #else

int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int index, @@ -64,11 +62,6 @@ int dsa_8021q_rx_source_port(u16 vid) return 0; }

-struct sk_buff *dsa_8021q_remove_header(struct sk_buff *skb) -{ - return NULL; -} - #endif /* IS_ENABLED(CONFIG_NET_DSA_TAG_8021Q) */

#endif /* _NET_DSA_8021Q_H */ --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -298,47 +298,4 @@ struct sk_buff *dsa_8021q_xmit(struct sk } EXPORT_SYMBOL_GPL(dsa_8021q_xmit);

-/* In the DSA packet_type handler, skb->data points in the middle of the VLAN - * tag, after tpid and before tci. This is because so far, ETH_HLEN - * (DMAC, SMAC, EtherType) bytes were pulled. - * There are 2 bytes of VLAN tag left in skb->data, and upper - * layers expect the 'real' EtherType to be consumed as well. - * Coincidentally, a VLAN header is also of the same size as - * the number of bytes that need to be pulled. - * - * skb_mac_header skb->data - * | | - * v v - * | | | | | | | | | | | | | | | | | | | - * +-----------------------+-----------------------+-------+-------+-------+ - * | Destination MAC | Source MAC | TPID | TCI | EType | - * +-----------------------+-----------------------+-------+-------+-------+ - * ^ | | - * |<--VLAN_HLEN-->to <---VLAN_HLEN---> - * from | - * >>>>>>> v - * >>>>>>> | | | | | | | | | | | | | | | - * >>>>>>> +-----------------------+-----------------------+-------+ - * >>>>>>> | Destination MAC | Source MAC | EType | - * +-----------------------+-----------------------+-------+ - * ^ ^ - * (now part of | | - * skb->head) skb_mac_header skb->data - */ -struct sk_buff *dsa_8021q_remove_header(struct sk_buff *skb) -{ - u8 *from = skb_mac_header(skb); - u8 *dest = from + VLAN_HLEN; - - memmove(dest, from, ETH_HLEN - VLAN_HLEN); - skb_pull(skb, VLAN_HLEN); - skb_push(skb, ETH_HLEN); - skb_reset_mac_header(skb); - skb_reset_mac_len(skb); - skb_pull_rcsum(skb, ETH_HLEN); - - return skb; -} -EXPORT_SYMBOL_GPL(dsa_8021q_remove_header); - MODULE_LICENSE("GPL v2"); --- a/net/dsa/tag_sja1105.c +++ b/net/dsa/tag_sja1105.c @@ -238,14 +238,14 @@ static struct sk_buff *sja1105_rcv(struc { struct sja1105_meta meta = {0}; int source_port, switch_id; - struct vlan_ethhdr *hdr; + struct ethhdr *hdr; u16 tpid, vid, tci; bool is_link_local; bool is_tagged; bool is_meta;

- hdr = vlan_eth_hdr(skb); - tpid = ntohs(hdr->h_vlan_proto); + hdr = eth_hdr(skb); + tpid = ntohs(hdr->h_proto); is_tagged = (tpid == ETH_P_SJA1105); is_link_local = sja1105_is_link_local(skb); is_meta = sja1105_is_meta_frame(skb); @@ -254,7 +254,12 @@ static struct sk_buff *sja1105_rcv(struc

if (is_tagged) { /* Normal traffic path. */ - tci = ntohs(hdr->h_vlan_TCI); + skb_push_rcsum(skb, ETH_HLEN); + __skb_vlan_pop(skb, &tci); + skb_pull_rcsum(skb, ETH_HLEN); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + vid = tci & VLAN_VID_MASK; source_port = dsa_8021q_rx_source_port(vid); switch_id = dsa_8021q_rx_switch_id(vid); @@ -283,12 +288,6 @@ static struct sk_buff *sja1105_rcv(struc return NULL; }

- /* Delete/overwrite fake VLAN header, DSA expects to not find - * it there, see dsa_switch_rcv: skb_push(skb, ETH_HLEN). - */ - if (is_tagged) - skb = dsa_8021q_remove_header(skb); - return sja1105_rcv_meta_state_machine(skb, &meta, is_link_local, is_meta); }

From: Jisheng Zhang Jisheng.Zhang@synaptics.com

[ Upstream commit 065fd83e1be2e1ba0d446a257fd86a3cc7bddb51 ]

For the case where the last mvneta_poll did not process all RX packets, we need to xor the pp->cause_rx_tx or port->cause_rx_tx before claculating the rx_queue.

Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Jisheng Zhang Jisheng.Zhang@synaptics.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/marvell/mvneta.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3036,11 +3036,10 @@ static int mvneta_poll(struct napi_struc /* For the case where the last mvneta_poll did not process all * RX packets */ - rx_queue = fls(((cause_rx_tx >> 8) & 0xff)); - cause_rx_tx |= pp->neta_armada3700 ? pp->cause_rx_tx : port->cause_rx_tx;

+ rx_queue = fls(((cause_rx_tx >> 8) & 0xff)); if (rx_queue) { rx_queue = rx_queue - 1; if (pp->bm_priv)

From: Grygorii Strashko grygorii.strashko@ti.com

[ Upstream commit 749f6f6843115b424680f1aada3c0dd613ad807c ]

When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0) will be defaulted to 0x2. This may cause the phy link to be unstable. The new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1.

Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when FLD is enabled by bootstrapping as recommended by DM.

Signed-off-by: Grygorii Strashko grygorii.strashko@ti.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/dp83867.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)

--- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -28,7 +28,8 @@ #define DP83867_CTRL 0x1f

/* Extended Registers */ -#define DP83867_CFG4 0x0031 +#define DP83867_FLD_THR_CFG 0x002e +#define DP83867_CFG4 0x0031 #define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6)) #define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5) #define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5) @@ -91,6 +92,7 @@ #define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0) #define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0 #define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2) +#define DP83867_STRAP_STS2_STRAP_FLD BIT(10)

/* PHY CTRL bits */ #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 @@ -123,6 +125,9 @@ /* CFG4 bits */ #define DP83867_CFG4_PORT_MIRROR_EN BIT(0)

+/* FLD_THR_CFG */ +#define DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK 0x7 + enum { DP83867_PORT_MIRROING_KEEP, DP83867_PORT_MIRROING_EN, @@ -459,6 +464,20 @@ static int dp83867_config_init(struct ph phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, BIT(7));

+ bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS2); + if (bs & DP83867_STRAP_STS2_STRAP_FLD) { + /* When using strap to enable FLD, the ENERGY_LOST_FLD_THR will + * be set to 0x2. This may causes the PHY link to be unstable - + * the default value 0x1 need to be restored. + */ + ret = phy_modify_mmd(phydev, DP83867_DEVADDR, + DP83867_FLD_THR_CFG, + DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK, + 0x1); + if (ret) + return ret; + } + if (phy_interface_is_rgmii(phydev)) { val = phy_read(phydev, MII_DP83867_PHYCTRL); if (val < 0)

From: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com

[ Upstream commit 872307abbd0d9afd72171929806c2fa33dc34179 ]

Check clk_prepare_enable() return value.

Fixes: 2c7230446bc9 ("net: phy: Add pm support to Broadcom iProc mdio mux driver") Signed-off-by: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/mdio-mux-bcm-iproc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/net/phy/mdio-mux-bcm-iproc.c +++ b/drivers/net/phy/mdio-mux-bcm-iproc.c @@ -288,8 +288,13 @@ static int mdio_mux_iproc_suspend(struct static int mdio_mux_iproc_resume(struct device *dev) { struct iproc_mdiomux_desc *md = dev_get_drvdata(dev); + int rc;

- clk_prepare_enable(md->core_clk); + rc = clk_prepare_enable(md->core_clk); + if (rc) { + dev_err(md->dev, "failed to enable core clk\n"); + return rc; + } mdio_mux_iproc_config(md);

return 0;

From: Paul Blakey paulb@mellanox.com

[ Upstream commit dd2af10402684cb5840a127caec9e7cdcff6d167 ]

Currently, on replace, the previous action instance params is swapped with a newly allocated params. The old params is only freed (via kfree_rcu), without releasing the allocated ct zone template related to it.

Call tcf_ct_params_free (via call_rcu) for the old params, so it will release it.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Paul Blakey paulb@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/act_ct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -739,7 +739,7 @@ static int tcf_ct_init(struct net *net, if (goto_ch) tcf_chain_put_by_act(goto_ch); if (params) - kfree_rcu(params, rcu); + call_rcu(&params->rcu, tcf_ct_params_free); if (res == ACT_P_CREATED) tcf_idr_insert(tn, *a);

From: Cong Wang xiyou.wangcong@gmail.com

[ Upstream commit b1be2e8cd290f620777bfdb8aa00890cd2fa02b5 ]

syzbot reported a use-after-free in tcindex_dump(). This is due to the lack of RTNL in the deferred rcu work. We queue this work with RTNL in tcindex_change(), later, tcindex_dump() is called:

fh = tp->ops->get(tp, t->tcm_handle); ... err = tp->ops->change(..., &fh, ...); tfilter_notify(..., fh, ...);

but there is nothing to serialize the pending tcindex_partial_destroy_work() with tcindex_dump().

Fix this by simply holding RTNL in tcindex_partial_destroy_work(), so that it won't be called until RTNL is released after tc_new_tfilter() is completed.

Reported-and-tested-by: syzbot+653090db2562495901dc@syzkaller.appspotmail.com Fixes: 3d210534cc93 ("net_sched: fix a race condition in tcindex_destroy()") Cc: Jamal Hadi Salim jhs@mojatatu.com Cc: Jiri Pirko jiri@resnulli.us Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/cls_tcindex.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/sched/cls_tcindex.c +++ b/net/sched/cls_tcindex.c @@ -261,8 +261,10 @@ static void tcindex_partial_destroy_work struct tcindex_data, rwork);

+ rtnl_lock(); kfree(p->perfect); kfree(p); + rtnl_unlock(); }

static void tcindex_free_perfect_hash(struct tcindex_data *cp)

From: Emil Renner Berthing kernel@esmil.dk

[ Upstream commit 9de9aa487daff7a5c73434c24269b44ed6a428e6 ]

Make sure we clean up devicetree related configuration also when clock init fails.

Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support") Signed-off-by: Emil Renner Berthing kernel@esmil.dk Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -1411,7 +1411,7 @@ static int rk_gmac_probe(struct platform

ret = rk_gmac_clk_init(plat_dat); if (ret) - return ret; + goto err_remove_config_dt;

ret = rk_gmac_powerup(plat_dat->bsp_priv); if (ret)

From: Heiner Kallweit hkallweit1@gmail.com

[ Upstream commit f13bc68131b0c0d67a77fb43444e109828a983bf ]

The original change fixed an issue on RTL8168b by mimicking the vendor driver behavior to disable MSI on chip versions before RTL8168d. This however now caused an issue on a system with RTL8168c, see [0]. Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c.

[0] https://bugzilla.redhat.com/show_bug.cgi?id=1792839

Fixes: 003bd5b4a7b4 ("r8169: don't use MSI before RTL8168d") Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/realtek/r8169_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -6579,7 +6579,7 @@ static int rtl_alloc_irq(struct rtl8169_ RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~MSIEnable); rtl_lock_config_regs(tp); /* fall through */ - case RTL_GIGA_MAC_VER_07 ... RTL_GIGA_MAC_VER_24: + case RTL_GIGA_MAC_VER_07 ... RTL_GIGA_MAC_VER_17: flags = PCI_IRQ_LEGACY; break; default:

From: Florian Westphal fw@strlen.de

[ Upstream commit 07f8e4d0fddbf2f87e4cefb551278abc38db8cdd ]

In rare cases retransmit logic will make a full skb copy, which will not trigger the zeroing added in recent change b738a185beaa ("tcp: ensure skb->dev is NULL before leaving TCP stack").

Cc: Eric Dumazet edumazet@google.com Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue") Fixes: 28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp_output.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2976,8 +2976,12 @@ int __tcp_retransmit_skb(struct sock *sk

tcp_skb_tsorted_save(skb) { nskb = __pskb_copy(skb, MAX_TCP_HEADER, GFP_ATOMIC); - err = nskb ? tcp_transmit_skb(sk, nskb, 0, GFP_ATOMIC) : - -ENOBUFS; + if (nskb) { + nskb->dev = NULL; + err = tcp_transmit_skb(sk, nskb, 0, GFP_ATOMIC); + } else { + err = -ENOBUFS; + } } tcp_skb_tsorted_restore(skb);

if (!err) {

From: Eric Dumazet edumazet@google.com

[ Upstream commit 6cd6cbf593bfa3ae6fc3ed34ac21da4d35045425 ]

When application uses TCP_QUEUE_SEQ socket option to change tp->rcv_next, we must also update tp->copied_seq.

Otherwise, stuff relying on tcp_inq() being precise can eventually be confused.

For example, tcp_zerocopy_receive() might crash because it does not expect tcp_recv_skb() to return NULL.

We could add tests in various places to fix the issue, or simply make sure tcp_inq() wont return a random value, and leave fast path as it is.

Note that this fixes ioctl(fd, SIOCINQ, &val) at the same time.

Fixes: ee9952831cfd ("tcp: Initial repair mode") Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2947,8 +2947,10 @@ static int do_tcp_setsockopt(struct sock err = -EPERM; else if (tp->repair_queue == TCP_SEND_QUEUE) WRITE_ONCE(tp->write_seq, val); - else if (tp->repair_queue == TCP_RECV_QUEUE) + else if (tp->repair_queue == TCP_RECV_QUEUE) { WRITE_ONCE(tp->rcv_nxt, val); + WRITE_ONCE(tp->copied_seq, val); + } else err = -EINVAL; break;

From: Doug Berger opendmb@gmail.com

[ Upstream commit 612eb1c3b9e504de24136c947ed7c07bc342f3aa ]

This reverts commit 3a55402c93877d291b0a612d25edb03d1b4b93ac.

This is not a good solution when connecting to an external switch that may not support the isolation of the TXC signal resulting in output driver contention on the pin.

A different solution is necessary.

Signed-off-by: Doug Berger opendmb@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 + drivers/net/ethernet/broadcom/genet/bcmmii.c | 34 ------------------------- 2 files changed, 2 insertions(+), 34 deletions(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1996,6 +1996,8 @@ static void reset_umac(struct bcmgenet_p

/* issue soft reset with (rg)mii loopback to ensure a stable rxclk */ bcmgenet_umac_writel(priv, CMD_SW_RESET | CMD_LCL_LOOP_EN, UMAC_CMD); + udelay(2); + bcmgenet_umac_writel(priv, 0, UMAC_CMD); }

static void bcmgenet_intr_disable(struct bcmgenet_priv *priv) --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -181,38 +181,8 @@ int bcmgenet_mii_config(struct net_devic const char *phy_name = NULL; u32 id_mode_dis = 0; u32 port_ctrl; - int bmcr = -1; - int ret; u32 reg;

- /* MAC clocking workaround during reset of umac state machines */ - reg = bcmgenet_umac_readl(priv, UMAC_CMD); - if (reg & CMD_SW_RESET) { - /* An MII PHY must be isolated to prevent TXC contention */ - if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { - ret = phy_read(phydev, MII_BMCR); - if (ret >= 0) { - bmcr = ret; - ret = phy_write(phydev, MII_BMCR, - bmcr | BMCR_ISOLATE); - } - if (ret) { - netdev_err(dev, "failed to isolate PHY\n"); - return ret; - } - } - /* Switch MAC clocking to RGMII generated clock */ - bcmgenet_sys_writel(priv, PORT_MODE_EXT_GPHY, SYS_PORT_CTRL); - /* Ensure 5 clks with Rx disabled - * followed by 5 clks with Reset asserted - */ - udelay(4); - reg &= ~(CMD_SW_RESET | CMD_LCL_LOOP_EN); - bcmgenet_umac_writel(priv, reg, UMAC_CMD); - /* Ensure 5 more clocks before Rx is enabled */ - udelay(2); - } - switch (priv->phy_interface) { case PHY_INTERFACE_MODE_INTERNAL: phy_name = "internal PHY"; @@ -282,10 +252,6 @@ int bcmgenet_mii_config(struct net_devic

bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);

- /* Restore the MII PHY after isolation */ - if (bmcr >= 0) - phy_write(phydev, MII_BMCR, bmcr); - priv->ext_phy = !priv->internal_phy && (priv->phy_interface != PHY_INTERFACE_MODE_MOCA);

From: Michael Chan michael.chan@broadcom.com

[ Upstream commit a24ec3220f369aa0b94c863b6b310685a727151c ]

There is an indexing bug in determining these ethtool priority counters. Instead of using the queue ID to index, we need to normalize by modulo 10 to get the index. This index is then used to obtain the proper CoS queue counter. Rename bp->pri2cos to bp->pri2cos_idx to make this more clear.

Fixes: e37fed790335 ("bnxt_en: Add ethtool -S priority counters.") Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++++++- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 ++++---- 3 files changed, 14 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7406,14 +7406,22 @@ static int bnxt_hwrm_port_qstats_ext(str pri2cos = &resp2->pri0_cos_queue_id; for (i = 0; i < 8; i++) { u8 queue_id = pri2cos[i]; + u8 queue_idx;

+ /* Per port queue IDs start from 0, 10, 20, etc */ + queue_idx = queue_id % 10; + if (queue_idx > BNXT_MAX_QUEUE) { + bp->pri2cos_valid = false; + goto qstats_done; + } for (j = 0; j < bp->max_q; j++) { if (bp->q_ids[j] == queue_id) - bp->pri2cos[i] = j; + bp->pri2cos_idx[i] = queue_idx; } } bp->pri2cos_valid = 1; } +qstats_done: mutex_unlock(&bp->hwrm_cmd_lock); return rc; } --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1714,7 +1714,7 @@ struct bnxt { u16 fw_rx_stats_ext_size; u16 fw_tx_stats_ext_size; u16 hw_ring_stats_size; - u8 pri2cos[8]; + u8 pri2cos_idx[8]; u8 pri2cos_valid;

u16 hwrm_max_req_len; --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -589,25 +589,25 @@ skip_ring_stats: if (bp->pri2cos_valid) { for (i = 0; i < 8; i++, j++) { long n = bnxt_rx_bytes_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i];

buf[j] = le64_to_cpu(*(rx_port_stats_ext + n)); } for (i = 0; i < 8; i++, j++) { long n = bnxt_rx_pkts_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i];

buf[j] = le64_to_cpu(*(rx_port_stats_ext + n)); } for (i = 0; i < 8; i++, j++) { long n = bnxt_tx_bytes_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i];

buf[j] = le64_to_cpu(*(tx_port_stats_ext + n)); } for (i = 0; i < 8; i++, j++) { long n = bnxt_tx_pkts_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i];

buf[j] = le64_to_cpu(*(tx_port_stats_ext + n)); }

From: Michael Chan michael.chan@broadcom.com

[ Upstream commit 0b5b561cea32d5bb1e0a82d65b755a3cb5212141 ]

The current code ignores the return value from bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in the init path even when this vital firmware call has failed. Fix it by propagating the error code to the caller.

Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6880,12 +6880,12 @@ skip_rdma: } ena |= FUNC_BACKING_STORE_CFG_REQ_DFLT_ENABLES; rc = bnxt_hwrm_func_backing_store_cfg(bp, ena); - if (rc) + if (rc) { netdev_err(bp->dev, "Failed configuring context mem, rc = %d.\n", rc); - else - ctx->flags |= BNXT_CTX_FLAG_INITED; - + return rc; + } + ctx->flags |= BNXT_CTX_FLAG_INITED; return 0; }

From: Vasundhara Volam vasundhara-v.volam@broadcom.com

[ Upstream commit 5d765a5e4bd7c368e564e11402bba74cf7f03ac1 ]

If ring counts are not reset when ring reservation fails, bnxt_init_dflt_ring_mode() will not be called again to reinitialise IRQs when open() is called and results in system crash as napi will also be not initialised. This patch fixes it by resetting the ring counts.

Fixes: 47558acd56a7 ("bnxt_en: Reserve rings at driver open if none was reserved at probe time.") Signed-off-by: Vasundhara Volam vasundhara-v.volam@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -11666,6 +11666,10 @@ static int bnxt_set_dflt_rings(struct bn bp->rx_nr_rings++; bp->cp_nr_rings++; } + if (rc) { + bp->tx_nr_rings = 0; + bp->rx_nr_rings = 0; + } return rc; }

From: Arthur Kiyanovski akiyano@amazon.com

[ Upstream commit e02ae6ed51be3d28923bfd318ae57000f5643da5 ]

Bug: In short the main issue is caused by the fact that the number of queues is changed using ethtool after ena_probe() has been called and before ena_up() was executed. Here is the full scenario in detail:

* ena_probe() is called when the driver is loaded, the driver is not up yet at the end of ena_probe(). * The number of queues is changed -> io_queue_count is changed as well - ena_up() is not called since the "dev_was_up" boolean in ena_update_queue_count() is false. * ena_up() is called by the kernel (it's called asynchronously some time after ena_probe()). ena_setup_io_intr() is called by ena_up() and it uses io_queue_count to get the suitable irq lines for each msix vector. The function ena_request_io_irq() is called right after that and it uses msix_vecs - This value only changes during ena_probe() and ena_restore() - to request the irq vectors. This results in "Failed to request I/O IRQ" error for i > io_queue_count.

Numeric example: * After ena_probe() io_queue_count = 8, msix_vecs = 9. * The number of queues changes to 4 -> io_queue_count = 4, msix_vecs = 9. * ena_up() is executed for the first time: ** ena_setup_io_intr() inits the vectors only up to io_queue_count. ** ena_request_io_irq() calls request_irq() and fails for i = 5.

How to reproduce: simply run the following commands: sudo rmmod ena && sudo insmod ena.ko; sudo ethtool -L eth1 combined 3;

Fix: Use ENA_MAX_MSIX_VEC(adapter->num_io_queues + adapter->xdp_num_queues) instead of adapter->msix_vecs. We need to take XDP queues into consideration as they need to have msix vectors assigned to them as well. Note that the XDP cannot be attached before the driver is up and running but in XDP mode the issue might occur when the number of queues changes right after a reset trigger. The ENA_MAX_MSIX_VEC simply adds one to the argument since the first msix vector is reserved for management queue.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran sameehj@amazon.com Signed-off-by: Arthur Kiyanovski akiyano@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1444,6 +1444,7 @@ static int ena_request_mgmnt_irq(struct

static int ena_request_io_irq(struct ena_adapter *adapter) { + u32 io_queue_count = adapter->num_io_queues; unsigned long flags = 0; struct ena_irq *irq; int rc = 0, i, k; @@ -1454,7 +1455,7 @@ static int ena_request_io_irq(struct ena return -EINVAL; }

- for (i = ENA_IO_IRQ_FIRST_IDX; i < adapter->msix_vecs; i++) { + for (i = ENA_IO_IRQ_FIRST_IDX; i < ENA_MAX_MSIX_VEC(io_queue_count); i++) { irq = &adapter->irq_tbl[i]; rc = request_irq(irq->vector, irq->handler, flags, irq->name, irq->data); @@ -1495,6 +1496,7 @@ static void ena_free_mgmnt_irq(struct en

static void ena_free_io_irq(struct ena_adapter *adapter) { + u32 io_queue_count = adapter->num_io_queues; struct ena_irq *irq; int i;

@@ -1505,7 +1507,7 @@ static void ena_free_io_irq(struct ena_a } #endif /* CONFIG_RFS_ACCEL */

- for (i = ENA_IO_IRQ_FIRST_IDX; i < adapter->msix_vecs; i++) { + for (i = ENA_IO_IRQ_FIRST_IDX; i < ENA_MAX_MSIX_VEC(io_queue_count); i++) { irq = &adapter->irq_tbl[i]; irq_set_affinity_hint(irq->vector, NULL); free_irq(irq->vector, irq->data); @@ -1520,12 +1522,13 @@ static void ena_disable_msix(struct ena_

static void ena_disable_io_intr_sync(struct ena_adapter *adapter) { + u32 io_queue_count = adapter->num_io_queues; int i;

if (!netif_running(adapter->netdev)) return;

- for (i = ENA_IO_IRQ_FIRST_IDX; i < adapter->msix_vecs; i++) + for (i = ENA_IO_IRQ_FIRST_IDX; i < ENA_MAX_MSIX_VEC(io_queue_count); i++) synchronize_irq(adapter->irq_tbl[i].vector); }

From: Arthur Kiyanovski akiyano@amazon.com

[ Upstream commit dfdde1345bc124816f0fd42fa91b8748051e758e ]

last_keep_alive_jiffies is updated in probe and when a keep-alive event is received. In case the driver times-out on a keep-alive event, it has high chances of continuously timing-out on keep-alive events. This is because when the driver recovers from the keep-alive-timeout reset the value of last_keep_alive_jiffies is very old, and if a keep-alive event is not received before the next timer expires, the value of last_keep_alive_jiffies will cause another keep-alive-timeout reset and so forth in a loop.

Solution: Update last_keep_alive_jiffies whenever the device is restored after reset.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Noam Dagan ndagan@amazon.com Signed-off-by: Arthur Kiyanovski akiyano@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -2832,6 +2832,7 @@ static int ena_restore_device(struct ena netif_carrier_on(adapter->netdev);

mod_timer(&adapter->timer_service, round_jiffies(jiffies + HZ)); + adapter->last_keep_alive_jiffies = jiffies; dev_err(&pdev->dev, "Device reset completed successfully, Driver info: %s\n", version);

From: Petr Machata petrm@mellanox.com

[ Upstream commit 32ca98feab8c9076c89c0697c5a85e46fece809d ]

The fix referenced below causes a crash when an ERSPAN tunnel is created without passing IFLA_INFO_DATA. Fix by validating passed-in data in the same way as ipgre does.

Fixes: e1f8f78ffe98 ("net: ip_gre: Separate ERSPAN newlink / changelink callbacks") Reported-by: syzbot+1b4ebf4dae4e510dd219@syzkaller.appspotmail.com Signed-off-by: Petr Machata petrm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/ip_gre.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1168,6 +1168,8 @@ static int erspan_netlink_parms(struct n err = ipgre_netlink_parms(dev, data, tb, parms, fwmark); if (err) return err; + if (!data) + return 0;

if (data[IFLA_GRE_ERSPAN_VER]) { t->erspan_ver = nla_get_u8(data[IFLA_GRE_ERSPAN_VER]);

From: Taehee Yoo ap420073@gmail.com

[ Upstream commit ca19c70f5225771c05bcdcb832b4eb84d7271c5e ]

The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/hsr/hsr_netlink.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-)

--- a/net/hsr/hsr_netlink.c +++ b/net/hsr/hsr_netlink.c @@ -360,16 +360,14 @@ fail: */ static int hsr_get_node_list(struct sk_buff *skb_in, struct genl_info *info) { - /* For receiving */ - struct nlattr *na; + unsigned char addr[ETH_ALEN]; struct net_device *hsr_dev; - - /* For sending */ struct sk_buff *skb_out; - void *msg_head; struct hsr_priv *hsr; - void *pos; - unsigned char addr[ETH_ALEN]; + bool restart = false; + struct nlattr *na; + void *pos = NULL; + void *msg_head; int res;

if (!info) @@ -387,8 +385,9 @@ static int hsr_get_node_list(struct sk_b if (!is_hsr_master(hsr_dev)) goto rcu_unlock;

+restart: /* Send reply */ - skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC); + skb_out = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!skb_out) { res = -ENOMEM; goto fail; @@ -402,17 +401,28 @@ static int hsr_get_node_list(struct sk_b goto nla_put_failure; }

- res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex); - if (res < 0) - goto nla_put_failure; + if (!restart) { + res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex); + if (res < 0) + goto nla_put_failure; + }

hsr = netdev_priv(hsr_dev);

- pos = hsr_get_next_node(hsr, NULL, addr); + if (!pos) + pos = hsr_get_next_node(hsr, NULL, addr); while (pos) { res = nla_put(skb_out, HSR_A_NODE_ADDR, ETH_ALEN, addr); - if (res < 0) + if (res < 0) { + if (res == -EMSGSIZE) { + genlmsg_end(skb_out, msg_head); + genlmsg_unicast(genl_info_net(info), skb_out, + info->snd_portid); + restart = true; + goto restart; + } goto nla_put_failure; + } pos = hsr_get_next_node(hsr, pos, addr); } rcu_read_unlock(); @@ -429,7 +439,7 @@ invalid: return 0;

nla_put_failure: - kfree_skb(skb_out); + nlmsg_free(skb_out); /* Fall through */

fail:

From: Hamdan Igbaria hamdani@mellanox.com

[ Upstream commit 692b0399a22530b2de8490bea75a7d20d59391d0 ]

Fix the send info write length to be (actions x action) size in bytes.

Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Hamdan Igbaria hamdani@mellanox.com Reviewed-by: Alex Vesker valex@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c | 1 - drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c | 3 ++- 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c @@ -930,7 +930,6 @@ static int dr_actions_l2_rewrite(struct

action->rewrite.data = (void *)ops; action->rewrite.num_of_actions = i; - action->rewrite.chunk->byte_size = i * sizeof(*ops);

ret = mlx5dr_send_postsend_action(dmn, action); if (ret) { --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c @@ -558,7 +558,8 @@ int mlx5dr_send_postsend_action(struct m int ret;

send_info.write.addr = (uintptr_t)action->rewrite.data; - send_info.write.length = action->rewrite.chunk->byte_size; + send_info.write.length = action->rewrite.num_of_actions * + DR_MODIFY_ACTION_SIZE; send_info.write.lkey = 0; send_info.remote_addr = action->rewrite.chunk->mr_addr; send_info.rkey = action->rewrite.chunk->rkey;

From: Aya Levin ayal@mellanox.com

[ Upstream commit 39369fd536d485a99a59d8e357c0d4d3ce19a3b8 ]

When resetting the RQ (moving RQ state from RST to RDY), the driver resets the WQ's SW metadata. In striding RQ mode, we maintain a field that reflects the actual expected WQ head (including in progress WQEs posted to the ICOSQ). It was mistakenly not reset together with the WQ. Fix this here.

Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin ayal@mellanox.com Reviewed-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h @@ -181,10 +181,12 @@ mlx5e_tx_dma_unmap(struct device *pdev,

static inline void mlx5e_rqwq_reset(struct mlx5e_rq *rq) { - if (rq->wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ) + if (rq->wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ) { mlx5_wq_ll_reset(&rq->mpwqe.wq); - else + rq->mpwqe.actual_wq_head = 0; + } else { mlx5_wq_cyc_reset(&rq->wqe.wq); + } }

/* SW parser related functions */

From: Aya Levin ayal@mellanox.com

[ Upstream commit 187a9830c921d92c4a9a8e2921ecc4b35a97532c ]

For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be triggered. In these scenarios, the RQ is not actually in ERR state. This misleads the recovery flow which assumes that the RQ is really in error state and no more completions arrive, causing crashes on bad page state.

Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin ayal@mellanox.com Reviewed-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/en/health.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/health.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/health.h @@ -10,8 +10,7 @@

static inline bool cqe_syndrome_needs_recover(u8 syndrome) { - return syndrome == MLX5_CQE_SYNDROME_LOCAL_LENGTH_ERR || - syndrome == MLX5_CQE_SYNDROME_LOCAL_QP_OP_ERR || + return syndrome == MLX5_CQE_SYNDROME_LOCAL_QP_OP_ERR || syndrome == MLX5_CQE_SYNDROME_LOCAL_PROT_ERR || syndrome == MLX5_CQE_SYNDROME_WR_FLUSH_ERR; }

From: Tariq Toukan tariqt@mellanox.com

[ Upstream commit 56917766def72f5afdf4235adb91b6897ff26d9d ]

We have an off-by-1 issue in the TCP seq comparison. The last sequence number that belongs to the TCP packet's payload is not "start_seq + len", but one byte before it. Fix it so the 'ends_before' is evaluated properly.

This fixes a bug that results in error completions in the kTLS HW offload flows.

Fixes: ffbd9ca94e2e ("net/mlx5e: kTLS, Fix corner-case checks in TX resync flow") Signed-off-by: Tariq Toukan tariqt@mellanox.com Reviewed-by: Boris Pismenny borisp@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c @@ -218,7 +218,7 @@ tx_sync_info_get(struct mlx5e_ktls_offlo * this packet was already acknowledged and its record info * was released. */ - ends_before = before(tcp_seq + datalen, tls_record_start_seq(record)); + ends_before = before(tcp_seq + datalen - 1, tls_record_start_seq(record));

if (unlikely(tls_record_is_start_marker(record))) { ret = ends_before ? MLX5E_KTLS_SYNC_SKIP_NO_DATA : MLX5E_KTLS_SYNC_FAIL;

From: Vasily Averin vvs@virtuozzo.com

[ Upstream commit db8dd9697238be70a6b4f9d0284cd89f59c0e070 ]

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.

# mount | grep cgroup # dd if=/mnt/cgroup.procs bs=1 # normal output ... 1294 1295 1296 1304 1382 584+0 records in 584+0 records out 584 bytes copied

dd: /mnt/cgroup.procs: cannot skip to specified offset 83 <<< generates end of last line 1383 <<< ... and whole last line once again 0+1 records in 0+1 records out 8 bytes copied

dd: /mnt/cgroup.procs: cannot skip to specified offset 1386 <<< generates last line anyway 0+1 records in 0+1 records out 5 bytes copied

https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin vvs@virtuozzo.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cgroup/cgroup-v1.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index 09f3a413f6f89..84bedb87ae137 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -473,6 +473,7 @@ static void *cgroup_pidlist_next(struct seq_file *s, void *v, loff_t *pos) */ p++; if (p >= end) { + (*pos)++; return NULL; } else { *pos = *p;

From: Mike Gilbert floppym@gentoo.org

[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ]

Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables.

./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here

The -fno-common option will be enabled by default in GCC 10.

Bug: https://bugs.gentoo.org/707462 Signed-off-by: Mike Gilbert floppym@gentoo.org Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c | 2 +- tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c | 2 +- tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c | 2 ++ tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +- 4 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c index 33dc34db4f3cc..20f46348271b1 100644 --- a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c +++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c @@ -82,7 +82,7 @@ static struct pci_access *pci_acc; static struct pci_dev *amd_fam14h_pci_dev; static int nbp1_entered;

-struct timespec start_time; +static struct timespec start_time; static unsigned long long timediff;

#ifdef DEBUG diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c index 3c4cee160b0e6..a65f7d011513a 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c +++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c @@ -19,7 +19,7 @@ struct cpuidle_monitor cpuidle_sysfs_monitor;

static unsigned long long **previous_count; static unsigned long long **current_count; -struct timespec start_time; +static struct timespec start_time; static unsigned long long timediff;

static int cpuidle_get_count_percent(unsigned int id, double *percent, diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c index 6d44fec55ad5a..7c77045fef52f 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c @@ -27,6 +27,8 @@ struct cpuidle_monitor *all_monitors[] = { 0 };

+int cpu_count; + static struct cpuidle_monitor *monitors[MONITORS_MAX]; static unsigned int avail_monitors;

diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h index 5b5eb1da0cce3..c559d3115330a 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h @@ -25,7 +25,7 @@ #endif #define CSTATE_DESC_LEN 60

-int cpu_count; +extern int cpu_count;

/* Hard to define the right names ...: */ enum power_range_e {

From: Tycho Andersen tycho@tycho.ws

[ Upstream commit 2e5383d7904e60529136727e49629a82058a5607 ]

Older (and maybe current) versions of systemd set release_agent to "" when shutting down, but do not set notify_on_release to 0.

Since 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()"), we filter out such calls when the user mode helper path is "". However, when used in conjunction with an actual (i.e. non "") STATIC_USERMODEHELPER, the path is never "", so the real usermode helper will be called with argv[0] == "".

Let's avoid this by not invoking the release_agent when it is "".

Signed-off-by: Tycho Andersen tycho@tycho.ws Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cgroup/cgroup-v1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index 84bedb87ae137..a1fbf500d0af7 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -785,7 +785,7 @@ void cgroup1_release_agent(struct work_struct *work)

pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL); - if (!pathbuf || !agentbuf) + if (!pathbuf || !agentbuf || !strlen(agentbuf)) goto out;

spin_lock_irq(&css_set_lock);

From: Martin Leung martin.leung@amd.com

[ Upstream commit d5349775c1726ce997b8eb4982cd85a01f1c8b42 ]

[why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team

[how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8

Signed-off-by: Martin Leung martin.leung@amd.com Reviewed-by: Jun Lei Jun.Lei@amd.com Acked-by: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c index 23ff2f1c75b5c..41c4ee84f8bb5 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c @@ -337,6 +337,117 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_0_soc = { .use_urgent_burst_bw = 0 };

+struct _vcs_dpi_soc_bounding_box_st dcn2_0_nv14_soc = { + .clock_limits = { + { + .state = 0, + .dcfclk_mhz = 560.0, + .fabricclk_mhz = 560.0, + .dispclk_mhz = 513.0, + .dppclk_mhz = 513.0, + .phyclk_mhz = 540.0, + .socclk_mhz = 560.0, + .dscclk_mhz = 171.0, + .dram_speed_mts = 8960.0, + }, + { + .state = 1, + .dcfclk_mhz = 694.0, + .fabricclk_mhz = 694.0, + .dispclk_mhz = 642.0, + .dppclk_mhz = 642.0, + .phyclk_mhz = 600.0, + .socclk_mhz = 694.0, + .dscclk_mhz = 214.0, + .dram_speed_mts = 11104.0, + }, + { + .state = 2, + .dcfclk_mhz = 875.0, + .fabricclk_mhz = 875.0, + .dispclk_mhz = 734.0, + .dppclk_mhz = 734.0, + .phyclk_mhz = 810.0, + .socclk_mhz = 875.0, + .dscclk_mhz = 245.0, + .dram_speed_mts = 14000.0, + }, + { + .state = 3, + .dcfclk_mhz = 1000.0, + .fabricclk_mhz = 1000.0, + .dispclk_mhz = 1100.0, + .dppclk_mhz = 1100.0, + .phyclk_mhz = 810.0, + .socclk_mhz = 1000.0, + .dscclk_mhz = 367.0, + .dram_speed_mts = 16000.0, + }, + { + .state = 4, + .dcfclk_mhz = 1200.0, + .fabricclk_mhz = 1200.0, + .dispclk_mhz = 1284.0, + .dppclk_mhz = 1284.0, + .phyclk_mhz = 810.0, + .socclk_mhz = 1200.0, + .dscclk_mhz = 428.0, + .dram_speed_mts = 16000.0, + }, + /*Extra state, no dispclk ramping*/ + { + .state = 5, + .dcfclk_mhz = 1200.0, + .fabricclk_mhz = 1200.0, + .dispclk_mhz = 1284.0, + .dppclk_mhz = 1284.0, + .phyclk_mhz = 810.0, + .socclk_mhz = 1200.0, + .dscclk_mhz = 428.0, + .dram_speed_mts = 16000.0, + }, + }, + .num_states = 5, + .sr_exit_time_us = 8.6, + .sr_enter_plus_exit_time_us = 10.9, + .urgent_latency_us = 4.0, + .urgent_latency_pixel_data_only_us = 4.0, + .urgent_latency_pixel_mixed_with_vm_data_us = 4.0, + .urgent_latency_vm_data_only_us = 4.0, + .urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096, + .urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096, + .urgent_out_of_order_return_per_channel_vm_only_bytes = 4096, + .pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 40.0, + .pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 40.0, + .pct_ideal_dram_sdp_bw_after_urgent_vm_only = 40.0, + .max_avg_sdp_bw_use_normal_percent = 40.0, + .max_avg_dram_bw_use_normal_percent = 40.0, + .writeback_latency_us = 12.0, + .ideal_dram_bw_after_urgent_percent = 40.0, + .max_request_size_bytes = 256, + .dram_channel_width_bytes = 2, + .fabric_datapath_to_dcn_data_return_bytes = 64, + .dcn_downspread_percent = 0.5, + .downspread_percent = 0.38, + .dram_page_open_time_ns = 50.0, + .dram_rw_turnaround_time_ns = 17.5, + .dram_return_buffer_per_channel_bytes = 8192, + .round_trip_ping_latency_dcfclk_cycles = 131, + .urgent_out_of_order_return_per_channel_bytes = 256, + .channel_interleave_bytes = 256, + .num_banks = 8, + .num_chans = 8, + .vmm_page_size_bytes = 4096, + .dram_clock_change_latency_us = 404.0, + .dummy_pstate_latency_us = 5.0, + .writeback_dram_clock_change_latency_us = 23.0, + .return_bus_width_bytes = 64, + .dispclk_dppclk_vco_speed_mhz = 3850, + .xfc_bus_transport_time_us = 20, + .xfc_xbuf_latency_tolerance_us = 4, + .use_urgent_burst_bw = 0 +}; + struct _vcs_dpi_soc_bounding_box_st dcn2_0_nv12_soc = { 0 };

#ifndef mmDP0_DP_DPHY_INTERNAL_CTRL @@ -3282,6 +3393,9 @@ void dcn20_patch_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st static struct _vcs_dpi_soc_bounding_box_st *get_asic_rev_soc_bb( uint32_t hw_internal_rev) { + if (ASICREV_IS_NAVI14_M(hw_internal_rev)) + return &dcn2_0_nv14_soc; + if (ASICREV_IS_NAVI12_P(hw_internal_rev)) return &dcn2_0_nv12_soc;

From: Marek Szyprowski m.szyprowski@samsung.com

[ Upstream commit 07dc3678bacc2a75b1900febea7d996a31f178a2 ]

Store the IOMMU mapping created by the device core of each Exynos DRM sub-device and restore it when the Exynos DRM driver is unbound. This fixes IOMMU initialization failure for the second time when a deferred probe is triggered from the bind() callback of master's compound DRM driver. This also fixes the following issue found using kmemleak detector:

unreferenced object 0xc2137640 (size 64): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 50 a3 14 c2 80 a2 14 c2 01 00 00 00 20 00 00 00 P........... ... 00 10 00 00 00 80 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a280 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a0 ec ed 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xedeca000 (size 4096): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a300 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a3 14 c2 00 a3 14 c2 00 40 18 c2 00 80 18 c2 .........@...... 02 00 02 00 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... backtrace: [<08cbd8bc>] iommu_domain_alloc+0x24/0x50 [<b835abee>] arm_iommu_create_mapping+0xe4/0x134 [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20

Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Reviewed-by: Lukasz Luba lukasz.luba@arm.com Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 5 ++-- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 5 ++-- drivers/gpu/drm/exynos/exynos_drm_dma.c | 28 +++++++++++++------ drivers/gpu/drm/exynos/exynos_drm_drv.h | 6 ++-- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 5 ++-- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 5 ++-- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 5 ++-- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 5 ++-- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 5 ++-- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 6 ++-- drivers/gpu/drm/exynos/exynos_mixer.c | 7 +++-- 11 files changed, 53 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 2d5cbfda3ca79..9c262daf5816e 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -55,6 +55,7 @@ static const char * const decon_clks_name[] = { struct decon_context { struct device *dev; struct drm_device *drm_dev; + void *dma_priv; struct exynos_drm_crtc *crtc; struct exynos_drm_plane planes[WINDOWS_NR]; struct exynos_drm_plane_config configs[WINDOWS_NR]; @@ -644,7 +645,7 @@ static int decon_bind(struct device *dev, struct device *master, void *data)

decon_clear_channels(ctx->crtc);

- return exynos_drm_register_dma(drm_dev, dev); + return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv); }

static void decon_unbind(struct device *dev, struct device *master, void *data) @@ -654,7 +655,7 @@ static void decon_unbind(struct device *dev, struct device *master, void *data) decon_disable(ctx->crtc);

/* detach this sub driver from iommu mapping if supported. */ - exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev); + exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv); }

static const struct component_ops decon_component_ops = { diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index f0640950bd465..6fd40410dfd2e 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -40,6 +40,7 @@ struct decon_context { struct device *dev; struct drm_device *drm_dev; + void *dma_priv; struct exynos_drm_crtc *crtc; struct exynos_drm_plane planes[WINDOWS_NR]; struct exynos_drm_plane_config configs[WINDOWS_NR]; @@ -127,13 +128,13 @@ static int decon_ctx_initialize(struct decon_context *ctx,

decon_clear_channels(ctx->crtc);

- return exynos_drm_register_dma(drm_dev, ctx->dev); + return exynos_drm_register_dma(drm_dev, ctx->dev, &ctx->dma_priv); }

static void decon_ctx_remove(struct decon_context *ctx) { /* detach this sub driver from iommu mapping if supported. */ - exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev); + exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv); }

static u32 decon_calc_clkdiv(struct decon_context *ctx, diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c index 9ebc02768847e..619f81435c1b2 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dma.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c @@ -58,7 +58,7 @@ static inline void clear_dma_max_seg_size(struct device *dev) * mapping. */ static int drm_iommu_attach_device(struct drm_device *drm_dev, - struct device *subdrv_dev) + struct device *subdrv_dev, void **dma_priv) { struct exynos_drm_private *priv = drm_dev->dev_private; int ret; @@ -74,7 +74,14 @@ static int drm_iommu_attach_device(struct drm_device *drm_dev, return ret;

if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) { - if (to_dma_iommu_mapping(subdrv_dev)) + /* + * Keep the original DMA mapping of the sub-device and + * restore it on Exynos DRM detach, otherwise the DMA + * framework considers it as IOMMU-less during the next + * probe (in case of deferred probe or modular build) + */ + *dma_priv = to_dma_iommu_mapping(subdrv_dev); + if (*dma_priv) arm_iommu_detach_device(subdrv_dev);

ret = arm_iommu_attach_device(subdrv_dev, priv->mapping); @@ -98,19 +105,21 @@ static int drm_iommu_attach_device(struct drm_device *drm_dev, * mapping */ static void drm_iommu_detach_device(struct drm_device *drm_dev, - struct device *subdrv_dev) + struct device *subdrv_dev, void **dma_priv) { struct exynos_drm_private *priv = drm_dev->dev_private;

- if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) + if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) { arm_iommu_detach_device(subdrv_dev); - else if (IS_ENABLED(CONFIG_IOMMU_DMA)) + arm_iommu_attach_device(subdrv_dev, *dma_priv); + } else if (IS_ENABLED(CONFIG_IOMMU_DMA)) iommu_detach_device(priv->mapping, subdrv_dev);

clear_dma_max_seg_size(subdrv_dev); }

-int exynos_drm_register_dma(struct drm_device *drm, struct device *dev) +int exynos_drm_register_dma(struct drm_device *drm, struct device *dev, + void **dma_priv) { struct exynos_drm_private *priv = drm->dev_private;

@@ -137,13 +146,14 @@ int exynos_drm_register_dma(struct drm_device *drm, struct device *dev) priv->mapping = mapping; }

- return drm_iommu_attach_device(drm, dev); + return drm_iommu_attach_device(drm, dev, dma_priv); }

-void exynos_drm_unregister_dma(struct drm_device *drm, struct device *dev) +void exynos_drm_unregister_dma(struct drm_device *drm, struct device *dev, + void **dma_priv) { if (IS_ENABLED(CONFIG_EXYNOS_IOMMU)) - drm_iommu_detach_device(drm, dev); + drm_iommu_detach_device(drm, dev, dma_priv); }

void exynos_drm_cleanup_dma(struct drm_device *drm) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index d4014ba592fdc..735f436c857cc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -223,8 +223,10 @@ static inline bool is_drm_iommu_supported(struct drm_device *drm_dev) return priv->mapping ? true : false; }

-int exynos_drm_register_dma(struct drm_device *drm, struct device *dev); -void exynos_drm_unregister_dma(struct drm_device *drm, struct device *dev); +int exynos_drm_register_dma(struct drm_device *drm, struct device *dev, + void **dma_priv); +void exynos_drm_unregister_dma(struct drm_device *drm, struct device *dev, + void **dma_priv); void exynos_drm_cleanup_dma(struct drm_device *drm);

#ifdef CONFIG_DRM_EXYNOS_DPI diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 8ea2e1d77802a..29ab8be8604c9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -97,6 +97,7 @@ struct fimc_scaler { struct fimc_context { struct exynos_drm_ipp ipp; struct drm_device *drm_dev; + void *dma_priv; struct device *dev; struct exynos_drm_ipp_task *task; struct exynos_drm_ipp_formats *formats; @@ -1133,7 +1134,7 @@ static int fimc_bind(struct device *dev, struct device *master, void *data)

ctx->drm_dev = drm_dev; ipp->drm_dev = drm_dev; - exynos_drm_register_dma(drm_dev, dev); + exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv);

exynos_drm_ipp_register(dev, ipp, &ipp_funcs, DRM_EXYNOS_IPP_CAP_CROP | DRM_EXYNOS_IPP_CAP_ROTATE | @@ -1153,7 +1154,7 @@ static void fimc_unbind(struct device *dev, struct device *master, struct exynos_drm_ipp *ipp = &ctx->ipp;

exynos_drm_ipp_unregister(dev, ipp); - exynos_drm_unregister_dma(drm_dev, dev); + exynos_drm_unregister_dma(drm_dev, dev, &ctx->dma_priv); }

static const struct component_ops fimc_component_ops = { diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 8d0a929104e53..34e6b22173fae 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -167,6 +167,7 @@ static struct fimd_driver_data exynos5420_fimd_driver_data = { struct fimd_context { struct device *dev; struct drm_device *drm_dev; + void *dma_priv; struct exynos_drm_crtc *crtc; struct exynos_drm_plane planes[WINDOWS_NR]; struct exynos_drm_plane_config configs[WINDOWS_NR]; @@ -1090,7 +1091,7 @@ static int fimd_bind(struct device *dev, struct device *master, void *data) if (is_drm_iommu_supported(drm_dev)) fimd_clear_channels(ctx->crtc);

- return exynos_drm_register_dma(drm_dev, dev); + return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv); }

static void fimd_unbind(struct device *dev, struct device *master, @@ -1100,7 +1101,7 @@ static void fimd_unbind(struct device *dev, struct device *master,

fimd_disable(ctx->crtc);

- exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev); + exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv);

if (ctx->encoder) exynos_dpi_remove(ctx->encoder); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 2a3382d43bc90..fcee33a43aca3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -232,6 +232,7 @@ struct g2d_runqueue_node {

struct g2d_data { struct device *dev; + void *dma_priv; struct clk *gate_clk; void __iomem *regs; int irq; @@ -1409,7 +1410,7 @@ static int g2d_bind(struct device *dev, struct device *master, void *data) return ret; }

- ret = exynos_drm_register_dma(drm_dev, dev); + ret = exynos_drm_register_dma(drm_dev, dev, &g2d->dma_priv); if (ret < 0) { dev_err(dev, "failed to enable iommu.\n"); g2d_fini_cmdlist(g2d); @@ -1434,7 +1435,7 @@ static void g2d_unbind(struct device *dev, struct device *master, void *data) priv->g2d_dev = NULL;

cancel_work_sync(&g2d->runqueue_work); - exynos_drm_unregister_dma(g2d->drm_dev, dev); + exynos_drm_unregister_dma(g2d->drm_dev, dev, &g2d->dma_priv); }

static const struct component_ops g2d_component_ops = { diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 88b6fcaa20be0..45e9aee8366a8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -97,6 +97,7 @@ struct gsc_scaler { struct gsc_context { struct exynos_drm_ipp ipp; struct drm_device *drm_dev; + void *dma_priv; struct device *dev; struct exynos_drm_ipp_task *task; struct exynos_drm_ipp_formats *formats; @@ -1169,7 +1170,7 @@ static int gsc_bind(struct device *dev, struct device *master, void *data)

ctx->drm_dev = drm_dev; ctx->drm_dev = drm_dev; - exynos_drm_register_dma(drm_dev, dev); + exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv);

exynos_drm_ipp_register(dev, ipp, &ipp_funcs, DRM_EXYNOS_IPP_CAP_CROP | DRM_EXYNOS_IPP_CAP_ROTATE | @@ -1189,7 +1190,7 @@ static void gsc_unbind(struct device *dev, struct device *master, struct exynos_drm_ipp *ipp = &ctx->ipp;

exynos_drm_ipp_unregister(dev, ipp); - exynos_drm_unregister_dma(drm_dev, dev); + exynos_drm_unregister_dma(drm_dev, dev, &ctx->dma_priv); }

static const struct component_ops gsc_component_ops = { diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index b98482990d1ad..dafa87b820529 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -56,6 +56,7 @@ struct rot_variant { struct rot_context { struct exynos_drm_ipp ipp; struct drm_device *drm_dev; + void *dma_priv; struct device *dev; void __iomem *regs; struct clk *clock; @@ -243,7 +244,7 @@ static int rotator_bind(struct device *dev, struct device *master, void *data)

rot->drm_dev = drm_dev; ipp->drm_dev = drm_dev; - exynos_drm_register_dma(drm_dev, dev); + exynos_drm_register_dma(drm_dev, dev, &rot->dma_priv);

exynos_drm_ipp_register(dev, ipp, &ipp_funcs, DRM_EXYNOS_IPP_CAP_CROP | DRM_EXYNOS_IPP_CAP_ROTATE, @@ -261,7 +262,7 @@ static void rotator_unbind(struct device *dev, struct device *master, struct exynos_drm_ipp *ipp = &rot->ipp;

exynos_drm_ipp_unregister(dev, ipp); - exynos_drm_unregister_dma(rot->drm_dev, rot->dev); + exynos_drm_unregister_dma(rot->drm_dev, rot->dev, &rot->dma_priv); }

static const struct component_ops rotator_component_ops = { diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index 497973e9b2c55..93c43c8d914ee 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -39,6 +39,7 @@ struct scaler_data { struct scaler_context { struct exynos_drm_ipp ipp; struct drm_device *drm_dev; + void *dma_priv; struct device *dev; void __iomem *regs; struct clk *clock[SCALER_MAX_CLK]; @@ -450,7 +451,7 @@ static int scaler_bind(struct device *dev, struct device *master, void *data)

scaler->drm_dev = drm_dev; ipp->drm_dev = drm_dev; - exynos_drm_register_dma(drm_dev, dev); + exynos_drm_register_dma(drm_dev, dev, &scaler->dma_priv);

exynos_drm_ipp_register(dev, ipp, &ipp_funcs, DRM_EXYNOS_IPP_CAP_CROP | DRM_EXYNOS_IPP_CAP_ROTATE | @@ -470,7 +471,8 @@ static void scaler_unbind(struct device *dev, struct device *master, struct exynos_drm_ipp *ipp = &scaler->ipp;

exynos_drm_ipp_unregister(dev, ipp); - exynos_drm_unregister_dma(scaler->drm_dev, scaler->dev); + exynos_drm_unregister_dma(scaler->drm_dev, scaler->dev, + &scaler->dma_priv); }

static const struct component_ops scaler_component_ops = { diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 6cfdb95fef2fa..57e5e60577527 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -94,6 +94,7 @@ struct mixer_context { struct platform_device *pdev; struct device *dev; struct drm_device *drm_dev; + void *dma_priv; struct exynos_drm_crtc *crtc; struct exynos_drm_plane planes[MIXER_WIN_NR]; unsigned long flags; @@ -894,12 +895,14 @@ static int mixer_initialize(struct mixer_context *mixer_ctx, } }

- return exynos_drm_register_dma(drm_dev, mixer_ctx->dev); + return exynos_drm_register_dma(drm_dev, mixer_ctx->dev, + &mixer_ctx->dma_priv); }

static void mixer_ctx_remove(struct mixer_context *mixer_ctx) { - exynos_drm_unregister_dma(mixer_ctx->drm_dev, mixer_ctx->dev); + exynos_drm_unregister_dma(mixer_ctx->drm_dev, mixer_ctx->dev, + &mixer_ctx->dma_priv); }

static int mixer_enable_vblank(struct exynos_drm_crtc *crtc)

From: Juliet Kim julietk@linux.vnet.ibm.com

[ Upstream commit 7d7195a026bac47ac9943f11f84b7546276209dd ]

The ibmvnic driver does not check the device state when the device is removed. If the device is removed while a device reset is being processed, the remove may free structures needed by the reset, causing an oops.

Fix this by checking the device state before processing device remove.

Signed-off-by: Juliet Kim julietk@linux.vnet.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/ibm/ibmvnic.c | 24 ++++++++++++++++++++++-- drivers/net/ethernet/ibm/ibmvnic.h | 6 +++++- 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 830791ab4619c..3c7295056c85d 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2142,6 +2142,8 @@ static void __ibmvnic_reset(struct work_struct *work) { struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; + bool saved_state = false; + unsigned long flags; u32 reset_state; int rc = 0;

@@ -2153,17 +2155,25 @@ static void __ibmvnic_reset(struct work_struct *work) return; }

- reset_state = adapter->state; - rwi = get_next_rwi(adapter); while (rwi) { + spin_lock_irqsave(&adapter->state_lock, flags); + if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED) { + spin_unlock_irqrestore(&adapter->state_lock, flags); kfree(rwi); rc = EBUSY; break; }

+ if (!saved_state) { + reset_state = adapter->state; + adapter->state = VNIC_RESETTING; + saved_state = true; + } + spin_unlock_irqrestore(&adapter->state_lock, flags); + if (rwi->reset_reason == VNIC_RESET_CHANGE_PARAM) { /* CHANGE_PARAM requestor holds rtnl_lock */ rc = do_change_param_reset(adapter, rwi, reset_state); @@ -5091,6 +5101,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) __ibmvnic_delayed_reset); INIT_LIST_HEAD(&adapter->rwi_list); spin_lock_init(&adapter->rwi_lock); + spin_lock_init(&adapter->state_lock); mutex_init(&adapter->fw_lock); init_completion(&adapter->init_done); init_completion(&adapter->fw_done); @@ -5163,8 +5174,17 @@ static int ibmvnic_remove(struct vio_dev *dev) { struct net_device *netdev = dev_get_drvdata(&dev->dev); struct ibmvnic_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + + spin_lock_irqsave(&adapter->state_lock, flags); + if (adapter->state == VNIC_RESETTING) { + spin_unlock_irqrestore(&adapter->state_lock, flags); + return -EBUSY; + }

adapter->state = VNIC_REMOVING; + spin_unlock_irqrestore(&adapter->state_lock, flags); + rtnl_lock(); unregister_netdevice(netdev);

diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 60eccaf91b122..f8416e1d4cf09 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -941,7 +941,8 @@ enum vnic_state {VNIC_PROBING = 1, VNIC_CLOSING, VNIC_CLOSED, VNIC_REMOVING, - VNIC_REMOVED}; + VNIC_REMOVED, + VNIC_RESETTING};

enum ibmvnic_reset_reason {VNIC_RESET_FAILOVER = 1, VNIC_RESET_MOBILITY, @@ -1090,4 +1091,7 @@ struct ibmvnic_adapter {

struct ibmvnic_tunables desired; struct ibmvnic_tunables fallback; + + /* Used for serializatin of state field */ + spinlock_t state_lock; };

From: Nicolas Cavallari nicolas.cavallari@green-communications.fr

[ Upstream commit ba32679cac50c38fdf488296f96b1f3175532b8e ]

When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm.

Signed-off-by: Nicolas Cavallari nicolas.cavallari@green-communications.fr Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.fr Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/mesh_hwmp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index d699833703819..38a0383dfbcfa 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1152,7 +1152,8 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, } }

- if (!(mpath->flags & MESH_PATH_RESOLVING)) + if (!(mpath->flags & MESH_PATH_RESOLVING) && + mesh_path_sel_is_hwmp(sdata)) mesh_queue_preq(mpath, PREQ_Q_F_START);

if (skb_queue_len(&mpath->frame_queue) >= MESH_FRAME_QUEUE_LEN)

From: Dominik Czarnota dominik.b.czarnota@gmail.com

[ Upstream commit f3cc008bf6d59b8d93b4190e01d3e557b0040e15 ]

This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in:

strncmp(opt, "eee_timer:", 6)

the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:".

This bug doesn't seem to have any security impact since its present in module's cmdline parsing code.

Signed-off-by: Dominik Czarnota dominik.b.czarnota@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 52ed111d98f4d..15e3f668218b1 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -2279,7 +2279,7 @@ static int __init sxgbe_cmdline_opt(char *str) if (!str || !*str) return -EINVAL; while ((opt = strsep(&str, ",")) != NULL) { - if (!strncmp(opt, "eee_timer:", 6)) { + if (!strncmp(opt, "eee_timer:", 10)) { if (kstrtoint(opt + 10, 0, &eee_timer)) goto err; }

From: Megha Dey megha.dey@linux.intel.com

[ Upstream commit 1da8347d8505c137fb07ff06bbcd3f2bf37409bc ]

Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel) gets populated only when DMA remapping is enabled (dmar_disabled = 0) irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are detected.

Cc: Dan Carpenter dan.carpenter@oracle.com Fixes: ee2636b8670b1 ("iommu/vt-d: Enable base Intel IOMMU debugfs support") Signed-off-by: Megha Dey megha.dey@linux.intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel-iommu-debugfs.c | 11 ++++++++++- drivers/iommu/intel-iommu.c | 4 +++- 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/intel-iommu-debugfs.c b/drivers/iommu/intel-iommu-debugfs.c index 80378c10dd77a..bdf095e9dbe03 100644 --- a/drivers/iommu/intel-iommu-debugfs.c +++ b/drivers/iommu/intel-iommu-debugfs.c @@ -281,9 +281,16 @@ static int dmar_translation_struct_show(struct seq_file *m, void *unused) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; + u32 sts;

rcu_read_lock(); for_each_active_iommu(iommu, drhd) { + sts = dmar_readl(iommu->reg + DMAR_GSTS_REG); + if (!(sts & DMA_GSTS_TES)) { + seq_printf(m, "DMA Remapping is not enabled on %s\n", + iommu->name); + continue; + } root_tbl_walk(m, iommu); seq_putc(m, '\n'); } @@ -353,6 +360,7 @@ static int ir_translation_struct_show(struct seq_file *m, void *unused) struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; u64 irta; + u32 sts;

rcu_read_lock(); for_each_active_iommu(iommu, drhd) { @@ -362,7 +370,8 @@ static int ir_translation_struct_show(struct seq_file *m, void *unused) seq_printf(m, "Remapped Interrupt supported on IOMMU: %s\n", iommu->name);

- if (iommu->ir_table) { + sts = dmar_readl(iommu->reg + DMAR_GSTS_REG); + if (iommu->ir_table && (sts & DMA_GSTS_IRES)) { irta = virt_to_phys(iommu->ir_table->base); seq_printf(m, " IR table address:%llx\n", irta); ir_tbl_remap_entry_show(m, iommu); diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 10176d8ea3e65..7f31775e9b554 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -5005,6 +5005,9 @@ int __init intel_iommu_init(void)

down_write(&dmar_global_lock);

+ if (!no_iommu) + intel_iommu_debugfs_init(); + if (no_iommu || dmar_disabled) { /* * We exit the function here to ensure IOMMU's remapping and @@ -5100,7 +5103,6 @@ int __init intel_iommu_init(void) pr_info("Intel(R) Virtualization Technology for Directed I/O\n");

intel_iommu_enabled = 1; - intel_iommu_debugfs_init();

return 0;

From: Dan Carpenter dan.carpenter@oracle.com

commit 32cf3a610c35cb21e3157f4bbf29d89960e30a36 upstream.

These functions are supposed to return negative error codes but instead it returns true on failure and false on success. The error codes are eventually propagated back to user space.

Fixes: 48a2b783483b ("Input: add Raydium I2C touchscreen driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/20200303101306.4potflz7na2nn3od@kili.mountain Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/input/touchscreen/raydium_i2c_ts.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/input/touchscreen/raydium_i2c_ts.c +++ b/drivers/input/touchscreen/raydium_i2c_ts.c @@ -432,7 +432,7 @@ static int raydium_i2c_write_object(stru return 0; }

-static bool raydium_i2c_boot_trigger(struct i2c_client *client) +static int raydium_i2c_boot_trigger(struct i2c_client *client) { static const u8 cmd[7][6] = { { 0x08, 0x0C, 0x09, 0x00, 0x50, 0xD7 }, @@ -457,10 +457,10 @@ static bool raydium_i2c_boot_trigger(str } }

- return false; + return 0; }

-static bool raydium_i2c_fw_trigger(struct i2c_client *client) +static int raydium_i2c_fw_trigger(struct i2c_client *client) { static const u8 cmd[5][11] = { { 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0xD7, 0, 0, 0 }, @@ -483,7 +483,7 @@ static bool raydium_i2c_fw_trigger(struc } }

- return false; + return 0; }

static int raydium_i2c_check_path(struct i2c_client *client)

From: Yussuf Khalil dev@pp3345.net

commit 1369d0abe469fb4cdea8a5bce219d38cb857a658 upstream.

This laptop (and perhaps other variants of the same model) reports an SMBus-capable Synaptics touchpad. Everything (including suspend and resume) works fine when RMI is enabled via the kernel command line, so let's add it to the whitelist.

Signed-off-by: Yussuf Khalil dev@pp3345.net Link: https://lore.kernel.org/r/20200307213508.267187-1-dev@pp3345.net Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -186,6 +186,7 @@ static const char * const smbus_pnp_ids[ "SYN3052", /* HP EliteBook 840 G4 */ "SYN3221", /* HP 15-ay000 */ "SYN323d", /* HP Spectre X360 13-w013dx */ + "SYN3257", /* HP Envy 13-ad105ng */ NULL };

From: Kaike Wan kaike.wan@intel.com

commit 941224e09483ea3428ffc6402de56a4a2e2cb6da upstream.

When a kernel ULP requests the rdmavt to create a completion queue, it allocated the queue and set cq->kqueue to point to it. However, when the completion queue is destroyed, cq->queue is freed instead, leading to a memory leak:

https://lore.kernel.org/r/215235485.15264050.1583334487658.JavaMail.zimbra@r...

unreferenced object 0xffffc90006639000 (size 12288): comm "kworker/u128:0", pid 8, jiffies 4295777598 (age 589.085s) hex dump (first 32 bytes): 4d 00 00 00 4d 00 00 00 00 c0 08 ac 8b 88 ff ff M...M........... 00 00 00 00 80 00 00 00 00 00 00 00 10 00 00 00 ................ backtrace: [<0000000035a3d625>] __vmalloc_node_range+0x361/0x720 [<000000002942ce4f>] __vmalloc_node.constprop.30+0x63/0xb0 [<00000000f228f784>] rvt_create_cq+0x98a/0xd80 [rdmavt] [<00000000b84aec66>] __ib_alloc_cq_user+0x281/0x1260 [ib_core] [<00000000ef3764be>] nvme_rdma_cm_handler+0xdb7/0x1b80 [nvme_rdma] [<00000000936b401c>] cma_cm_event_handler+0xb7/0x550 [rdma_cm] [<00000000d9c40b7b>] addr_handler+0x195/0x310 [rdma_cm] [<00000000c7398a03>] process_one_req+0xdd/0x600 [ib_core] [<000000004d29675b>] process_one_work+0x920/0x1740 [<00000000efedcdb5>] worker_thread+0x87/0xb40 [<000000005688b340>] kthread+0x327/0x3f0 [<0000000043a168d6>] ret_from_fork+0x3a/0x50

This patch fixes the issue by freeing cq->kqueue instead.

Fixes: 239b0e52d8aa ("IB/hfi1: Move rvt_cq_wc struct into uapi directory") Link: https://lore.kernel.org/r/20200313123957.14343.43879.stgit@awfm-01.aw.intel.... Cc: stable@vger.kernel.org # 5.4.x Reported-by: Yi Zhang yi.zhang@redhat.com Reviewed-by: Mike Marciniszyn mike.marciniszyn@intel.com Reviewed-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Kaike Wan kaike.wan@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/sw/rdmavt/cq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/sw/rdmavt/cq.c +++ b/drivers/infiniband/sw/rdmavt/cq.c @@ -327,7 +327,7 @@ void rvt_destroy_cq(struct ib_cq *ibcq, if (cq->ip) kref_put(&cq->ip->ref, rvt_release_mmap_info); else - vfree(cq->queue); + vfree(cq->kqueue); }

/**

From: Jason Gunthorpe jgg@mellanox.com

commit 0f9826f4753f74f935e18c2a640484ecbd941346 upstream.

The tgid used to be part of ib_umem_free_notifier(), when it was reworked it got moved to release, but it should have been unconditional as all umem alloc paths get the tgid.

As is, creating an implicit ODP will leak the tgid reference.

Link: https://lore.kernel.org/r/20200304181607.GA22412@ziepe.ca Cc: stable@kernel.org Fixes: f25a546e6529 ("RDMA/odp: Use mmu_interval_notifier_insert()") Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/umem_odp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -290,8 +290,8 @@ void ib_umem_odp_release(struct ib_umem_ mmu_interval_notifier_remove(&umem_odp->notifier); kvfree(umem_odp->dma_list); kvfree(umem_odp->page_list); - put_pid(umem_odp->tgid); } + put_pid(umem_odp->tgid); kfree(umem_odp); } EXPORT_SYMBOL(ib_umem_odp_release);

From: Jason Gunthorpe jgg@mellanox.com

commit 7aefa6237cfe4a6fcf06a8656eee988b36f8fefc upstream.

Empty device names cannot be added to sysfs and crash with:

kobject: (00000000f9de3792): attempted to be registered with empty name! WARNING: CPU: 1 PID: 10856 at lib/kobject.c:234 kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 10856 Comm: syz-executor459 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Code: 7a ca ca f9 e9 f0 f8 ff ff 4c 89 f7 e8 cd ca ca f9 e9 95 f9 ff ff e8 13 25 8c f9 4c 89 e6 48 c7 c7 a0 08 1a 89 e8 a3 76 5c f9 <0f> 0b 41 bd ea ff ff ff e9 52 ff ff ff e8 f2 24 8c f9 0f 0b e8 eb RSP: 0018:ffffc90002006eb0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815eae46 RDI: fffff52000400dc8 RBP: ffffc90002006f08 R08: ffff8880972ac500 R09: ffffed1015d26659 R10: ffffed1015d26658 R11: ffff8880ae9332c7 R12: ffff888093034668 R13: 0000000000000000 R14: ffff8880a69d7600 R15: 0000000000000001 kobject_add_varg lib/kobject.c:390 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:442 device_add+0x3be/0x1d00 drivers/base/core.c:2412 ib_register_device drivers/infiniband/core/device.c:1371 [inline] ib_register_device+0x93e/0xe40 drivers/infiniband/core/device.c:1343 rxe_register_device+0x52e/0x655 drivers/infiniband/sw/rxe/rxe_verbs.c:1231 rxe_add+0x122b/0x1661 drivers/infiniband/sw/rxe/rxe.c:302 rxe_net_add+0x91/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:539 rxe_newlink+0x39/0x90 drivers/infiniband/sw/rxe/rxe.c:318 nldev_newlink+0x28a/0x430 drivers/infiniband/core/nldev.c:1538 rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Prevent empty names when checking the name provided from userspace during newlink and rename.

Fixes: 3856ec4b93c9 ("RDMA/core: Add RDMA_NLDEV_CMD_NEWLINK/DELLINK support") Fixes: 05d940d3a3ec ("RDMA/nldev: Allow IB device rename through RDMA netlink") Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200309191648.GA30852@ziepe.ca Reported-and-tested-by: syzbot+da615ac67d4dbea32cbc@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/nldev.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/core/nldev.c +++ b/drivers/infiniband/core/nldev.c @@ -917,6 +917,10 @@ static int nldev_set_doit(struct sk_buff

nla_strlcpy(name, tb[RDMA_NLDEV_ATTR_DEV_NAME], IB_DEVICE_NAME_MAX); + if (strlen(name) == 0) { + err = -EINVAL; + goto done; + } err = ib_device_rename(device, name); goto done; } @@ -1513,7 +1517,7 @@ static int nldev_newlink(struct sk_buff

nla_strlcpy(ibdev_name, tb[RDMA_NLDEV_ATTR_DEV_NAME], sizeof(ibdev_name)); - if (strchr(ibdev_name, '%')) + if (strchr(ibdev_name, '%') || strlen(ibdev_name) == 0) return -EINVAL;

nla_strlcpy(type, tb[RDMA_NLDEV_ATTR_LINK_TYPE], sizeof(type));

From: Ilya Dryomov idryomov@gmail.com

commit 7614209736fbc4927584d4387faade4f31444fce upstream.

CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult per-pool flags as well. Unfortunately the backwards compatibility here is lacking:

- the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but was guarded by require_osd_release >= RELEASE_LUMINOUS - it was subsequently backported to luminous in v12.2.2, but that makes no difference to clients that only check OSDMAP_FULL/NEARFULL because require_osd_release is not client-facing -- it is for OSDs

Since all kernels are affected, the best we can do here is just start checking both map flags and pool flags and send that to stable.

These checks are best effort, so take osdc->lock and look up pool flags just once. Remove the FIXME, since filesystem quotas are checked above and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set.

Cc: stable@vger.kernel.org Reported-by: Yanhu Cao gmayyyha@gmail.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Reviewed-by: Jeff Layton jlayton@kernel.org Acked-by: Sage Weil sage@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/ceph/file.c | 14 +++++++++++--- include/linux/ceph/osdmap.h | 4 ++++ include/linux/ceph/rados.h | 6 ++++-- net/ceph/osdmap.c | 9 +++++++++ 4 files changed, 28 insertions(+), 5 deletions(-)

--- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -1415,10 +1415,13 @@ static ssize_t ceph_write_iter(struct ki struct inode *inode = file_inode(file); struct ceph_inode_info *ci = ceph_inode(inode); struct ceph_fs_client *fsc = ceph_inode_to_client(inode); + struct ceph_osd_client *osdc = &fsc->client->osdc; struct ceph_cap_flush *prealloc_cf; ssize_t count, written = 0; int err, want, got; bool direct_lock = false; + u32 map_flags; + u64 pool_flags; loff_t pos; loff_t limit = max(i_size_read(inode), fsc->max_file_size);

@@ -1481,8 +1484,12 @@ retry_snap: goto out; }

- /* FIXME: not complete since it doesn't account for being at quota */ - if (ceph_osdmap_flag(&fsc->client->osdc, CEPH_OSDMAP_FULL)) { + down_read(&osdc->lock); + map_flags = osdc->osdmap->flags; + pool_flags = ceph_pg_pool_flags(osdc->osdmap, ci->i_layout.pool_id); + up_read(&osdc->lock); + if ((map_flags & CEPH_OSDMAP_FULL) || + (pool_flags & CEPH_POOL_FLAG_FULL)) { err = -ENOSPC; goto out; } @@ -1575,7 +1582,8 @@ retry_snap: }

if (written >= 0) { - if (ceph_osdmap_flag(&fsc->client->osdc, CEPH_OSDMAP_NEARFULL)) + if ((map_flags & CEPH_OSDMAP_NEARFULL) || + (pool_flags & CEPH_POOL_FLAG_NEARFULL)) iocb->ki_flags |= IOCB_DSYNC; written = generic_write_sync(iocb, written); } --- a/include/linux/ceph/osdmap.h +++ b/include/linux/ceph/osdmap.h @@ -37,6 +37,9 @@ int ceph_spg_compare(const struct ceph_s #define CEPH_POOL_FLAG_HASHPSPOOL (1ULL << 0) /* hash pg seed and pool id together */ #define CEPH_POOL_FLAG_FULL (1ULL << 1) /* pool is full */ +#define CEPH_POOL_FLAG_FULL_QUOTA (1ULL << 10) /* pool ran out of quota, + will set FULL too */ +#define CEPH_POOL_FLAG_NEARFULL (1ULL << 11) /* pool is nearfull */

struct ceph_pg_pool_info { struct rb_node node; @@ -304,5 +307,6 @@ extern struct ceph_pg_pool_info *ceph_pg

extern const char *ceph_pg_pool_name_by_id(struct ceph_osdmap *map, u64 id); extern int ceph_pg_poolid_by_name(struct ceph_osdmap *map, const char *name); +u64 ceph_pg_pool_flags(struct ceph_osdmap *map, u64 id);

#endif --- a/include/linux/ceph/rados.h +++ b/include/linux/ceph/rados.h @@ -143,8 +143,10 @@ extern const char *ceph_osd_state_name(i /* * osd map flag bits */ -#define CEPH_OSDMAP_NEARFULL (1<<0) /* sync writes (near ENOSPC) */ -#define CEPH_OSDMAP_FULL (1<<1) /* no data writes (ENOSPC) */ +#define CEPH_OSDMAP_NEARFULL (1<<0) /* sync writes (near ENOSPC), + not set since ~luminous */ +#define CEPH_OSDMAP_FULL (1<<1) /* no data writes (ENOSPC), + not set since ~luminous */ #define CEPH_OSDMAP_PAUSERD (1<<2) /* pause all reads */ #define CEPH_OSDMAP_PAUSEWR (1<<3) /* pause all writes */ #define CEPH_OSDMAP_PAUSEREC (1<<4) /* pause recovery */ --- a/net/ceph/osdmap.c +++ b/net/ceph/osdmap.c @@ -710,6 +710,15 @@ int ceph_pg_poolid_by_name(struct ceph_o } EXPORT_SYMBOL(ceph_pg_poolid_by_name);

+u64 ceph_pg_pool_flags(struct ceph_osdmap *map, u64 id) +{ + struct ceph_pg_pool_info *pi; + + pi = __lookup_pg_pool(&map->pg_pools, id); + return pi ? pi->flags : 0; +} +EXPORT_SYMBOL(ceph_pg_pool_flags); + static void __remove_pg_pool(struct rb_root *root, struct ceph_pg_pool_info *pi) { rb_erase(&pi->node, root);

From: Tom Lendacky thomas.lendacky@amd.com

commit 2e2409afe5f0c284c7dfe5504058e8d115806a7d upstream.

Currently, CLFLUSH is used to flush SEV guest memory before the guest is terminated (or a memory hotplug region is removed). However, CLFLUSH is not enough to ensure that SEV guest tagged data is flushed from the cache.

With 33af3a7ef9e6 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations"), the original WBINVD was removed. This then exposed crashes at random times because of a cache flush race with a page that had both a hypervisor and a guest tag in the cache.

Restore the WBINVD when destroying an SEV guest and add a WBINVD to the svm_unregister_enc_region() function to ensure hotplug memory is flushed when removed. The DF_FLUSH can still be avoided at this point.

Fixes: 33af3a7ef9e6 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations") Signed-off-by: Tom Lendacky thomas.lendacky@amd.com Message-Id: c8bf9087ca3711c5770bdeaafa3e45b717dc5ef4.1584720426.git.thomas.lendacky@amd.com Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kvm/svm.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)

--- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1920,14 +1920,6 @@ static void sev_clflush_pages(struct pag static void __unregister_enc_region_locked(struct kvm *kvm, struct enc_region *region) { - /* - * The guest may change the memory encryption attribute from C=0 -> C=1 - * or vice versa for this memory range. Lets make sure caches are - * flushed to ensure that guest data gets written into memory with - * correct C-bit. - */ - sev_clflush_pages(region->pages, region->npages); - sev_unpin_memory(kvm, region->pages, region->npages); list_del(&region->list); kfree(region); @@ -1958,6 +1950,13 @@ static void sev_vm_destroy(struct kvm *k mutex_lock(&kvm->lock);

/* + * Ensure that all guest tagged cache entries are flushed before + * releasing the pages back to the system for use. CLFLUSH will + * not do this, so issue a WBINVD. + */ + wbinvd_on_all_cpus(); + + /* * if userspace was terminated before unregistering the memory regions * then lets unpin all the registered memory. */ @@ -7212,6 +7211,13 @@ static int svm_unregister_enc_region(str goto failed; }

+ /* + * Ensure that all guest tagged cache entries are flushed before + * releasing the pages back to the system for use. CLFLUSH will + * not do this, so issue a WBINVD. + */ + wbinvd_on_all_cpus(); + __unregister_enc_region_locked(kvm, region);

mutex_unlock(&kvm->lock);

From: Roger Quadros rogerq@ti.com

commit dfa7ea303f56a3a8b1ed3b91ef35af2da67ca4ee upstream.

The L3 interconnect's memory map is from 0x0 to 0xffffffff. Out of this, System memory (SDRAM) can be accessed from 0x80000000 to 0xffffffff (2GB)

OMAP5 does support 4GB of SDRAM but upper 2GB can only be accessed by the MPU subsystem.

Add the dma-ranges property to reflect the physical address limit of the L3 bus.

Cc: stable@kernel.org Signed-off-by: Roger Quadros rogerq@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/omap5.dtsi | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -143,6 +143,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; reg = <0 0x44000000 0 0x2000>, <0 0x44800000 0 0x3000>,

From: Masami Hiramatsu mhiramat@kernel.org

commit 6b8d68f1ce9266b05a55e93c62923ff51daae4c1 upstream.

When we put an event with multiple probes, perf-probe fails to delete with filters. This comes from a failure to list up the event name because of overwrapping its name.

To fix this issue, skip to list up the event which has same name.

Without this patch:

# perf probe -l * probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:21@ probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:25@ probe_perf:map__map_ip (on append_inlines:12@util/machine.c in probe_perf:map__map_ip (on unwind_entry:19@util/machine.c in / probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi # perf probe -d * "*" does not hit any event. Error: Failed to delete events. Reason: No such file or directory (Code: -2)

With it:

# perf probe -d * Removed event: probe_perf:map__map_ip #

Fixes: 72363540c009 ("perf probe: Support multiprobe event") Reported-by: Arnaldo Carvalho de Melo acme@kernel.org Reported-by: He Zhe zhe.he@windriver.com Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Cc: Adrian Hunter adrian.hunter@intel.com Cc: Jiri Olsa jolsa@kernel.org Cc: Namhyung Kim namhyung@kernel.org Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158287666197.16697.7514373548551863562.stgit@dev... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/perf/util/probe-file.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/tools/perf/util/probe-file.c +++ b/tools/perf/util/probe-file.c @@ -206,6 +206,9 @@ static struct strlist *__probe_file__get } else ret = strlist__add(sl, tev.event); clear_probe_trace_event(&tev); + /* Skip if there is same name multi-probe event in the list */ + if (ret == -EEXIST) + ret = 0; if (ret < 0) break; }

From: Larry Finger Larry.Finger@lwfinger.net

commit c80b18cbb04b7b101af9bd14550f13d9866c646a upstream.

For some unexplained reason, commit d1d1a96bdb44 ("rtlwifi: rtl8188ee: Remove local configuration variable") broke at least one system. As the only net effect of the change was to remove 2 bytes from the start of struct phy_status_rpt, this patch adds 2 bytes of padding at the beginning of the struct.

Fixes: d1d1a96bdb44 ("rtlwifi: rtl8188ee: Remove local configuration variable") Cc: Stable stable@vger.kernel.org # V5.4+ Reported-by: Ashish ashishkumar.yadav@students.iiserpune.ac.in Tested-by: Ashish ashishkumar.yadav@students.iiserpune.ac.in Signed-off-by: Larry Finger Larry.Finger@lwfinger.net Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.h | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.h +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.h @@ -561,6 +561,7 @@ static inline void clear_pci_tx_desc_con rxmcs == DESC92C_RATE11M)

struct phy_status_rpt { + u8 padding[2]; u8 ch_corr[2]; u8 cck_sig_qual_ofdm_pwdb_all; u8 cck_agc_rpt_ofdm_cfosho_a;

From: Dirk Mueller dmueller@suse.com

commit e33a814e772cdc36436c8c188d8c42d019fda639 upstream.

gcc 10 will default to -fno-common, which causes this error at link time:

(.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here

This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to:

dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors

which means the declaration is completely redundant and can just be dropped.

Signed-off-by: Dirk Mueller dmueller@suse.com Signed-off-by: David Gibson david@gibson.dropbear.id.au [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring robh@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- scripts/dtc/dtc-lexer.l | 1 - 1 file changed, 1 deletion(-)

--- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -23,7 +23,6 @@ LINECOMMENT "//".*\n #include "srcpos.h" #include "dtc-parser.tab.h"

-YYLTYPE yylloc; extern bool treesource_error;

/* CAUTION: this will stop working if we ever use yyless() or yyunput() */

From: Shane Francis bigbeeshane@gmail.com

commit 42e67b479eab6d26459b80b4867298232b0435e7 upstream.

As dma_map_sg can reorganize scatter-gather lists in a way that can cause some later segments to be empty we should always use the sg_dma_len macro to fetch the actual length.

This could now be 0 and not need to be mapped to a page or address array

Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis bigbeeshane@gmail.com Reviewed-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-2-bigbees... Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/drm_prime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -964,7 +964,7 @@ int drm_prime_sg_to_page_addr_arrays(str

index = 0; for_each_sg(sgt->sgl, sg, sgt->nents, count) { - len = sg->length; + len = sg_dma_len(sg); page = sg_page(sg); addr = sg_dma_address(sg);

From: Shane Francis bigbeeshane@gmail.com

commit 47f7826c520ecd92ffbffe59ecaa2fe61e42ec70 upstream.

Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case.

Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis bigbeeshane@gmail.com Reviewed-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-4-bigbees... Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/radeon/radeon_ttm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -528,7 +528,7 @@ static int radeon_ttm_tt_pin_userptr(str

r = -ENOMEM; nents = dma_map_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction); - if (nents != ttm->sg->nents) + if (nents == 0) goto release_sg;

drm_prime_sg_to_page_addr_arrays(ttm->sg, ttm->pages,

From: Martin K. Petersen martin.petersen@oracle.com

commit ea697a8bf5a4161e59806fab14f6e4a46dc7dcb0 upstream.

Some USB bridge devices will return a default set of characteristics during initialization. And then, once an attached drive has spun up, substitute the actual parameters reported by the drive. According to the SCSI spec, the device should return a UNIT ATTENTION in case any reported parameters change. But in this case the change is made silently after a small window where default values are reported.

Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") validated the reported optimal I/O size against the physical block size to overcome problems with devices reporting nonsensical transfer sizes. However, this validation did not account for the fact that aforementioned devices will return default values during a brief window during spin-up. The subsequent change in reported characteristics would invalidate the checking that had previously been performed.

Unset a previously configured optimal I/O size should the sanity checking fail on subsequent revalidate attempts.

Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com Cc: Bryan Gurney bgurney@redhat.com Cc: stable@vger.kernel.org Reported-by: Bernhard Sulzer micraft.b@gmail.com Tested-by: Bernhard Sulzer micraft.b@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/sd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3181,9 +3181,11 @@ static int sd_revalidate_disk(struct gen if (sd_validate_opt_xfer_size(sdkp, dev_max)) { q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks); rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks); - } else + } else { + q->limits.io_opt = 0; rw_max = min_not_zero(logical_to_sectors(sdp, dev_max), (sector_t)BLK_DEF_MAX_SECTORS); + }

/* Do not exceed controller limit */ rw_max = min(rw_max, queue_max_hw_sectors(q));

From: Johannes Berg johannes.berg@intel.com

commit a0761a301746ec2d92d7fcb82af69c0a6a4339aa upstream.

If we know that we have an encrypted link (based on having had a key configured for TX in the past) then drop all data frames in the key selection handler if there's no key anymore.

This fixes an issue with mac80211 internal TXQs - there we can buffer frames for an encrypted link, but then if the key is no longer there when they're dequeued, the frames are sent without encryption. This happens if a station is disconnected while the frames are still on the TXQ.

Detecting that a link should be encrypted based on a first key having been configured for TX is fine as there are no use cases for a connection going from with encryption to no encryption. With extended key IDs, however, there is a case of having a key configured for only decryption, so we can't just trigger this behaviour on a key being configured.

Cc: stable@vger.kernel.org Reported-by: Jouni Malinen j@w1.fi Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b0642... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/mac80211/debugfs_sta.c | 3 ++- net/mac80211/key.c | 20 ++++++++++++-------- net/mac80211/sta_info.h | 1 + net/mac80211/tx.c | 12 +++++++++--- 4 files changed, 24 insertions(+), 12 deletions(-)

--- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -5,7 +5,7 @@ * Copyright 2007 Johannes Berg johannes@sipsolutions.net * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright(c) 2016 Intel Deutschland GmbH - * Copyright (C) 2018 - 2019 Intel Corporation + * Copyright (C) 2018 - 2020 Intel Corporation */

#include <linux/debugfs.h> @@ -78,6 +78,7 @@ static const char * const sta_flag_names FLAG(MPSP_OWNER), FLAG(MPSP_RECIPIENT), FLAG(PS_DELIVER), + FLAG(USES_ENCRYPTION), #undef FLAG };

--- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -6,7 +6,7 @@ * Copyright 2007-2008 Johannes Berg johannes@sipsolutions.net * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright 2018-2019 Intel Corporation + * Copyright 2018-2020 Intel Corporation */

#include <linux/if_ether.h> @@ -262,22 +262,29 @@ static void ieee80211_key_disable_hw_acc sta ? sta->sta.addr : bcast_addr, ret); }

-int ieee80211_set_tx_key(struct ieee80211_key *key) +static int _ieee80211_set_tx_key(struct ieee80211_key *key, bool force) { struct sta_info *sta = key->sta; struct ieee80211_local *local = key->local;

assert_key_lock(local);

+ set_sta_flag(sta, WLAN_STA_USES_ENCRYPTION); + sta->ptk_idx = key->conf.keyidx;

- if (!ieee80211_hw_check(&local->hw, AMPDU_KEYBORDER_SUPPORT)) + if (force || !ieee80211_hw_check(&local->hw, AMPDU_KEYBORDER_SUPPORT)) clear_sta_flag(sta, WLAN_STA_BLOCK_BA); ieee80211_check_fast_xmit(sta);

return 0; }

+int ieee80211_set_tx_key(struct ieee80211_key *key) +{ + return _ieee80211_set_tx_key(key, false); +} + static void ieee80211_pairwise_rekey(struct ieee80211_key *old, struct ieee80211_key *new) { @@ -441,11 +448,8 @@ static int ieee80211_key_replace(struct if (pairwise) { rcu_assign_pointer(sta->ptk[idx], new); if (new && - !(new->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX)) { - sta->ptk_idx = idx; - clear_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_check_fast_xmit(sta); - } + !(new->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX)) + _ieee80211_set_tx_key(new, true); } else { rcu_assign_pointer(sta->gtk[idx], new); } --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -98,6 +98,7 @@ enum ieee80211_sta_info_flags { WLAN_STA_MPSP_OWNER, WLAN_STA_MPSP_RECIPIENT, WLAN_STA_PS_DELIVER, + WLAN_STA_USES_ENCRYPTION,

NUM_WLAN_STA_FLAGS, }; --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -590,10 +590,13 @@ ieee80211_tx_h_select_key(struct ieee802 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;

- if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) + if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) { tx->key = NULL; - else if (tx->sta && - (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx]))) + return TX_CONTINUE; + } + + if (tx->sta && + (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx]))) tx->key = key; else if (ieee80211_is_group_privacy_action(tx->skb) && (key = rcu_dereference(tx->sdata->default_multicast_key))) @@ -654,6 +657,9 @@ ieee80211_tx_h_select_key(struct ieee802 if (!skip_hw && tx->key && tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) info->control.hw_key = &tx->key->conf; + } else if (!ieee80211_is_mgmt(hdr->frame_control) && tx->sta && + test_sta_flag(tx->sta, WLAN_STA_USES_ENCRYPTION)) { + return TX_DROP; }

return TX_CONTINUE;

From: Naohiro Aota naohiro.aota@wdc.com

commit d795a90e2ba024dbf2f22107ae89c210b98b08b8 upstream.

claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode.

This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon().

This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap".

===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release!

other info that might help us debug this: no locks held by swapon/4294.

stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7

Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota naohiro.aota@wdc.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Tested-by: Qais Youef qais.yousef@arm.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Cc: Christoph Hellwig hch@infradead.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/swapfile.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-)

--- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2899,10 +2899,6 @@ static int claim_swapfile(struct swap_in p->bdev = inode->i_sb->s_bdev; }

- inode_lock(inode); - if (IS_SWAPFILE(inode)) - return -EBUSY; - return 0; }

@@ -3157,17 +3153,22 @@ SYSCALL_DEFINE2(swapon, const char __use mapping = swap_file->f_mapping; inode = mapping->host;

- /* If S_ISREG(inode->i_mode) will do inode_lock(inode); */ error = claim_swapfile(p, inode); if (unlikely(error)) goto bad_swap;

+ inode_lock(inode); + if (IS_SWAPFILE(inode)) { + error = -EBUSY; + goto bad_swap_unlock_inode; + } + /* * Read the swap header. */ if (!mapping->a_ops->readpage) { error = -EINVAL; - goto bad_swap; + goto bad_swap_unlock_inode; } page = read_mapping_page(mapping, 0, swap_file); if (IS_ERR(page)) { @@ -3179,14 +3180,14 @@ SYSCALL_DEFINE2(swapon, const char __use maxpages = read_swap_header(p, swap_header, inode); if (unlikely(!maxpages)) { error = -EINVAL; - goto bad_swap; + goto bad_swap_unlock_inode; }

/* OK, set up the swap map and apply the bad block list */ swap_map = vzalloc(maxpages); if (!swap_map) { error = -ENOMEM; - goto bad_swap; + goto bad_swap_unlock_inode; }

if (bdi_cap_stable_pages_required(inode_to_bdi(inode))) @@ -3211,7 +3212,7 @@ SYSCALL_DEFINE2(swapon, const char __use GFP_KERNEL); if (!cluster_info) { error = -ENOMEM; - goto bad_swap; + goto bad_swap_unlock_inode; }

for (ci = 0; ci < nr_cluster; ci++) @@ -3220,7 +3221,7 @@ SYSCALL_DEFINE2(swapon, const char __use p->percpu_cluster = alloc_percpu(struct percpu_cluster); if (!p->percpu_cluster) { error = -ENOMEM; - goto bad_swap; + goto bad_swap_unlock_inode; } for_each_possible_cpu(cpu) { struct percpu_cluster *cluster; @@ -3234,13 +3235,13 @@ SYSCALL_DEFINE2(swapon, const char __use

error = swap_cgroup_swapon(p->type, maxpages); if (error) - goto bad_swap; + goto bad_swap_unlock_inode;

nr_extents = setup_swap_map_and_extents(p, swap_header, swap_map, cluster_info, maxpages, &span); if (unlikely(nr_extents < 0)) { error = nr_extents; - goto bad_swap; + goto bad_swap_unlock_inode; } /* frontswap enabled? set up bit-per-page map for frontswap */ if (IS_ENABLED(CONFIG_FRONTSWAP)) @@ -3280,7 +3281,7 @@ SYSCALL_DEFINE2(swapon, const char __use

error = init_swap_address_space(p->type, maxpages); if (error) - goto bad_swap; + goto bad_swap_unlock_inode;

/* * Flush any pending IO and dirty mappings before we start using this @@ -3290,7 +3291,7 @@ SYSCALL_DEFINE2(swapon, const char __use error = inode_drain_writes(inode); if (error) { inode->i_flags &= ~S_SWAPFILE; - goto bad_swap; + goto bad_swap_unlock_inode; }

mutex_lock(&swapon_mutex); @@ -3315,6 +3316,8 @@ SYSCALL_DEFINE2(swapon, const char __use

error = 0; goto out; +bad_swap_unlock_inode: + inode_unlock(inode); bad_swap: free_percpu(p->percpu_cluster); p->percpu_cluster = NULL; @@ -3322,6 +3325,7 @@ bad_swap: set_blocksize(p->bdev, p->old_block_size); blkdev_put(p->bdev, FMODE_READ | FMODE_WRITE | FMODE_EXCL); } + inode = NULL; destroy_swap_extents(p); swap_cgroup_swapoff(p->type); spin_lock(&swap_lock); @@ -3333,13 +3337,8 @@ bad_swap: kvfree(frontswap_map); if (inced_nr_rotate_swap) atomic_dec(&nr_rotate_swap); - if (swap_file) { - if (inode) { - inode_unlock(inode); - inode = NULL; - } + if (swap_file) filp_close(swap_file, NULL); - } out: if (page && !IS_ERR(page)) { kunmap(page);

From: Aneesh Kumar K.V aneesh.kumar@linux.ibm.com

commit b943f045a9af9fd02f923e43fe8d7517e9961701 upstream.

Fix the crash like this:

BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000000c3447c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1 ... NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0 LR [c000000000088354] vmemmap_free+0x144/0x320 Call Trace: section_deactivate+0x220/0x240 __remove_pages+0x118/0x170 arch_remove_memory+0x3c/0x150 memunmap_pages+0x1cc/0x2f0 devm_action_release+0x30/0x50 release_nodes+0x2f8/0x3e0 device_release_driver_internal+0x168/0x270 unbind_store+0x130/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x68/0x80 kernfs_fop_write+0x100/0x290 __vfs_write+0x3c/0x70 vfs_write+0xcc/0x240 ksys_write+0x7c/0x140 system_call+0x5c/0x68

The crash is due to NULL dereference at

test_bit(idx, ms->usage->subsection_map);

due to ms->usage = NULL in pfn_section_valid()

With commit d41e2f3bd546 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after depopulate_section_mem(). This was done so that pfn_page() can work correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that config pfn_to_page does

__section_mem_map_addr(__sec) + __pfn;

where

static inline struct page *__section_mem_map_addr(struct mem_section *section) { unsigned long map = section->section_mem_map; map &= SECTION_MAP_MASK; return (struct page *)map; }

Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is used to check the pfn validity (pfn_valid()). Since section_deactivate release mem_section->usage if a section is fully deactivated, pfn_valid() check after a subsection_deactivate cause a kernel crash.

static inline int pfn_valid(unsigned long pfn) { ... return early_section(ms) || pfn_section_valid(ms, pfn); }

where

static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn) { int idx = subsection_map_index(pfn);

return test_bit(idx, ms->usage->subsection_map); }

Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is freed. For architectures like ppc64 where large pages are used for vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple sections. Hence before a vmemmap mapping page can be freed, the kernel needs to make sure there are no valid sections within that mapping. Clearing the section valid bit before depopulate_section_memap enables this.

[aneesh.kumar@linux.ibm.com: add comment] Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comL...: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com Fixes: d41e2f3bd546 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") Reported-by: Sachin Sant sachinp@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V aneesh.kumar@linux.ibm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Tested-by: Sachin Sant sachinp@linux.vnet.ibm.com Reviewed-by: Baoquan He bhe@redhat.com Reviewed-by: Wei Yang richard.weiyang@gmail.com Acked-by: Michal Hocko mhocko@suse.com Acked-by: Pankaj Gupta pankaj.gupta.linux@gmail.com Cc: Michael Ellerman mpe@ellerman.id.au Cc: Dan Williams dan.j.williams@intel.com Cc: David Hildenbrand david@redhat.com Cc: Oscar Salvador osalvador@suse.de Cc: Mike Rapoport rppt@linux.ibm.com Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/sparse.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/mm/sparse.c +++ b/mm/sparse.c @@ -791,6 +791,12 @@ static void section_deactivate(unsigned ms->usage = NULL; } memmap = sparse_decode_mem_map(ms->section_mem_map, section_nr); + /* + * Mark the section invalid so that valid_section() + * return false. This prevents code from dereferencing + * ms->usage array. + */ + ms->section_mem_map &= ~SECTION_HAS_MEM_MAP; }

if (section_is_early && memmap)

From: Hans de Goede hdegoede@redhat.com

commit efaa87fa0947d525cf7c075316adde4e3ac7720b upstream.

Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") added a quirk for some models of the HP x2 10 series.

There are 2 issues with the comment describing the quirk: 1) The comment claims the DMI quirk applies to all Cherry Trail based HP x2 10 models. In the mean time I have learned that there are at least 3 models of the HP x2 10 models:

Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC

And this quirk's DMI matches only match the Cherry Trail SoC + TI PMIC SoC, which is good because we want a slightly different quirk for the others. This commit updates the comment to make it clear that the quirk is only for the Cherry Trail SoC + TI PMIC models.

2) The comment says that it is ok to disable wakeup on all ACPI GPIO event handlers, because there is only the one for the embedded-controller events. This is not true, there also is a handler for the special INT0002 device which is related to USB wakeups. We need to also disable wakeups on that one because the device turns of the USB-keyboard built into the dock when closing the lid. The XHCI controller takes a while to notice this, so it only notices it when already suspended, causing a spurious wakeup because of this. So disabling wakeup on all handlers is the right thing to do, but not because there only is the one handler for the EC events. This commit updates the comment to correctly reflect this.

Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20200302111225.6641-1-hdegoede@redhat.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpio/gpiolib-acpi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -1345,12 +1345,14 @@ static const struct dmi_system_id gpioli }, { /* - * Various HP X2 10 Cherry Trail models use an external - * embedded-controller connected via I2C + an ACPI GPIO - * event handler. The embedded controller generates various - * spurious wakeup events when suspended. So disable wakeup - * for its handler (it uses the only ACPI GPIO event handler). - * This breaks wakeup when opening the lid, the user needs + * HP X2 10 models with Cherry Trail SoC + TI PMIC use an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FF:01 pin 0, causing spurious wakeups. + * When suspending by closing the LID, the power to the USB + * keyboard is turned off, causing INT0002 ACPI events to + * trigger once the XHCI controller notices the keyboard is + * gone. So INT0002 events cause spurious wakeups too. Ignoring + * EC wakes breaks wakeup when opening the lid, the user needs * to press the power-button to wakeup the system. The * alternative is suspend simply not working, which is worse. */

From: Hans de Goede hdegoede@redhat.com

commit 0e91506ba00730f088961a8d39f8693b0f8e3fea upstream.

Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") was added to deal with spurious wakeups on one specific model of the HP x2 10 series. In the mean time I have learned that there are at least 3 different HP x2 10 models:

Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC

And the original quirk is only correct for (and only matches the) Cherry Trail SoC + TI PMIC model.

The Bay Trail SoC + AXP288 PMIC model has different DMI strings, has the external EC interrupt on a different GPIO pin and only needs to ignore wakeups on the EC interrupt, the INT0002 device works fine on this model.

This commit adds an extra DMI based quirk for the HP x2 10 BYT + AXP288 model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin on this model. This fixes spurious wakeups from suspend on this model.

Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20200302111225.6641-3-hdegoede@redhat.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpio/gpiolib-acpi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)

--- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -1422,6 +1422,21 @@ static const struct dmi_system_id gpioli .ignore_wake = "INT33FF:01@0,INT0002:00@2", }, }, + { + /* + * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FC:02 pin 28, causing spurious wakeups. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"), + DMI_MATCH(DMI_BOARD_NAME, "815D"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_wake = "INT33FC:02@28", + }, + }, {} /* Terminating entry */ };

From: Mike Marciniszyn mike.marciniszyn@intel.com

commit 2d47fbacf2725a67869f4d3634c2415e7dfab2f4 upstream.

The following modify sequence (loosely based on ipoib) will lose a pkey modifcation:

- Modify (pkey index, port) - Modify (new pkey index, NO port)

After the first modify, the qp_pps list will have saved the pkey and the unit on the main list.

During the second modify, get_new_pps() will fetch the port from qp_pps and read the new pkey index from qp_attr->pkey_index. The state will still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state, the new values will never replace the one in the qp pps list, losing the new pkey.

This happens because the following if statements will never correct the state because the first term will be false. If the code had been executed, it would incorrectly overwrite valid values.

if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT)) new_pps->main.state = IB_PORT_PKEY_VALID;

if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) { new_pps->main.port_num = qp_pps->main.port_num; new_pps->main.pkey_index = qp_pps->main.pkey_index; if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID) new_pps->main.state = IB_PORT_PKEY_VALID; }

Fix by joining the two if statements with an or test to see if qp_pps is non-NULL and in the correct state.

Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Link: https://lore.kernel.org/r/20200313124704.14982.55907.stgit@awfm-01.aw.intel.... Reviewed-by: Kaike Wan kaike.wan@intel.com Signed-off-by: Mike Marciniszyn mike.marciniszyn@intel.com Reviewed-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/security.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)

--- a/drivers/infiniband/core/security.c +++ b/drivers/infiniband/core/security.c @@ -349,16 +349,11 @@ static struct ib_ports_pkeys *get_new_pp else if (qp_pps) new_pps->main.pkey_index = qp_pps->main.pkey_index;

- if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT)) + if (((qp_attr_mask & IB_QP_PKEY_INDEX) && + (qp_attr_mask & IB_QP_PORT)) || + (qp_pps && qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)) new_pps->main.state = IB_PORT_PKEY_VALID;

- if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) { - new_pps->main.port_num = qp_pps->main.port_num; - new_pps->main.pkey_index = qp_pps->main.pkey_index; - if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID) - new_pps->main.state = IB_PORT_PKEY_VALID; - } - if (qp_attr_mask & IB_QP_ALT_PATH) { new_pps->alt.port_num = qp_attr->alt_port_num; new_pps->alt.pkey_index = qp_attr->alt_pkey_index;

From: Edward Cree ecree@solarflare.com

commit df81dfcfd6991d547653d46c051bac195cd182c1 upstream.

The handling of notify->work did not properly maintain notify->kref in two cases: 1) where the work was already scheduled, another irq_set_affinity_locked() would get the ref and (no-op-ly) schedule the work. Thus when irq_affinity_notify() ran, it would drop the original ref but not the additional one. 2) when cancelling the (old) work in irq_set_affinity_notifier(), if there was outstanding work a ref had been got for it but was never put. Fix both by checking the return values of the work handling functions (schedule_work() for (1) and cancel_work_sync() for (2)) and put the extra ref if the return value indicates preexisting work.

Fixes: cd7eab44e994 ("genirq: Add IRQ affinity notifiers") Fixes: 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption") Signed-off-by: Edward Cree ecree@solarflare.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Acked-by: Ben Hutchings ben@decadent.org.uk Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/irq/manage.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -284,7 +284,11 @@ int irq_set_affinity_locked(struct irq_d

if (desc->affinity_notify) { kref_get(&desc->affinity_notify->kref); - schedule_work(&desc->affinity_notify->work); + if (!schedule_work(&desc->affinity_notify->work)) { + /* Work was already scheduled, drop our extra ref */ + kref_put(&desc->affinity_notify->kref, + desc->affinity_notify->release); + } } irqd_set(data, IRQD_AFFINITY_SET);

@@ -384,7 +388,10 @@ irq_set_affinity_notifier(unsigned int i raw_spin_unlock_irqrestore(&desc->lock, flags);

if (old_notify) { - cancel_work_sync(&old_notify->work); + if (cancel_work_sync(&old_notify->work)) { + /* Pending work had a ref, put that one too */ + kref_put(&old_notify->kref, old_notify->release); + } kref_put(&old_notify->kref, old_notify->release); }

From: Nicolas Dichtel nicolas.dichtel@6wind.com

commit f1ed10264ed6b66b9cd5e8461cffce69be482356 upstream.

I forgot the 4in6/6in4 cases in my previous patch. Let's fix them.

Fixes: 95224166a903 ("vti[6]: fix packet tx through bpf_redirect()") Signed-off-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/ipv4/Kconfig | 1 + net/ipv4/ip_vti.c | 36 +++++++++++++++++++++++++++++------- net/ipv6/ip6_vti.c | 32 +++++++++++++++++++++++++------- 3 files changed, 55 insertions(+), 14 deletions(-)

--- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -303,6 +303,7 @@ config SYN_COOKIES

config NET_IPVTI tristate "Virtual (secure) IP: tunneling" + depends on IPV6 || IPV6=n select INET_TUNNEL select NET_IP_TUNNEL select XFRM --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -187,17 +187,39 @@ static netdev_tx_t vti_xmit(struct sk_bu int mtu;

if (!dst) { - struct rtable *rt; + switch (skb->protocol) { + case htons(ETH_P_IP): { + struct rtable *rt;

- fl->u.ip4.flowi4_oif = dev->ifindex; - fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC; - rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4); - if (IS_ERR(rt)) { + fl->u.ip4.flowi4_oif = dev->ifindex; + fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC; + rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4); + if (IS_ERR(rt)) { + dev->stats.tx_carrier_errors++; + goto tx_error_icmp; + } + dst = &rt->dst; + skb_dst_set(skb, dst); + break; + } +#if IS_ENABLED(CONFIG_IPV6) + case htons(ETH_P_IPV6): + fl->u.ip6.flowi6_oif = dev->ifindex; + fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC; + dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6); + if (dst->error) { + dst_release(dst); + dst = NULL; + dev->stats.tx_carrier_errors++; + goto tx_error_icmp; + } + skb_dst_set(skb, dst); + break; +#endif + default: dev->stats.tx_carrier_errors++; goto tx_error_icmp; } - dst = &rt->dst; - skb_dst_set(skb, dst); }

dst_hold(dst); --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -450,15 +450,33 @@ vti6_xmit(struct sk_buff *skb, struct ne int mtu;

if (!dst) { - fl->u.ip6.flowi6_oif = dev->ifindex; - fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC; - dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6); - if (dst->error) { - dst_release(dst); - dst = NULL; + switch (skb->protocol) { + case htons(ETH_P_IP): { + struct rtable *rt; + + fl->u.ip4.flowi4_oif = dev->ifindex; + fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC; + rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4); + if (IS_ERR(rt)) + goto tx_err_link_failure; + dst = &rt->dst; + skb_dst_set(skb, dst); + break; + } + case htons(ETH_P_IPV6): + fl->u.ip6.flowi6_oif = dev->ifindex; + fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC; + dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6); + if (dst->error) { + dst_release(dst); + dst = NULL; + goto tx_err_link_failure; + } + skb_dst_set(skb, dst); + break; + default: goto tx_err_link_failure; } - skb_dst_set(skb, dst); }

dst_hold(dst);

From: Leon Romanovsky leonro@mellanox.com

commit 950bf4f17725556bbc773a5b71e88a6c14c9ff25 upstream.

The main difference between send and receive SW completions is related to separate treatment of WQ queue. For receive completions, the initial index to be flushed is stored in "tail", while for send completions, it is in deleted "last_poll".

CPU: 54 PID: 53405 Comm: kworker/u161:0 Kdump: loaded Tainted: G OE --------- -t - 4.18.0-147.el8.ppc64le #1 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] NIP: c000003c7c00a000 LR: c00800000e586af4 CTR: c000003c7c00a000 REGS: c0000036cc9db940 TRAP: 0400 Tainted: G OE --------- -t - (4.18.0-147.el8.ppc64le) MSR: 9000000010009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24004488 XER: 20040000 CFAR: c00800000e586af0 IRQMASK: 0 GPR00: c00800000e586ab4 c0000036cc9dbbc0 c00800000e5f1a00 c0000037d8433800 GPR04: c000003895a26800 c0000037293f2000 0000000000000201 0000000000000011 GPR08: c000003895a26c80 c000003c7c00a000 0000000000000000 c00800000ed30438 GPR12: c000003c7c00a000 c000003fff684b80 c00000000017c388 c00000396ec4be40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000000151e498 0000000000000010 c000003895a26848 0000000000000010 GPR24: 0000000000000010 0000000000010000 c000003895a26800 0000000000000000 GPR28: 0000000000000010 c0000037d8433800 c000003895a26c80 c000003895a26800 NIP [c000003c7c00a000] 0xc000003c7c00a000 LR [c00800000e586af4] __ib_process_cq+0xec/0x1b0 [ib_core] Call Trace: [c0000036cc9dbbc0] [c00800000e586ab4] __ib_process_cq+0xac/0x1b0 [ib_core] (unreliable) [c0000036cc9dbc40] [c00800000e586c88] ib_cq_poll_work+0x40/0xb0 [ib_core] [c0000036cc9dbc70] [c000000000171f44] process_one_work+0x2f4/0x5c0 [c0000036cc9dbd10] [c000000000172a0c] worker_thread+0xcc/0x760 [c0000036cc9dbdc0] [c00000000017c52c] kthread+0x1ac/0x1c0 [c0000036cc9dbe30] [c00000000000b75c] ret_from_kernel_thread+0x5c/0x80

Fixes: 8e3b68830186 ("RDMA/mlx5: Delete unreachable handle_atomic code by simplifying SW completion") Link: https://lore.kernel.org/r/20200318091640.44069-1-leon@kernel.org Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/mlx5/cq.c | 27 +++++++++++++++++++++++++-- drivers/infiniband/hw/mlx5/mlx5_ib.h | 1 + drivers/infiniband/hw/mlx5/qp.c | 1 + 3 files changed, 27 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/mlx5/cq.c +++ b/drivers/infiniband/hw/mlx5/cq.c @@ -330,6 +330,22 @@ static void mlx5_handle_error_cqe(struct dump_cqe(dev, cqe); }

+static void handle_atomics(struct mlx5_ib_qp *qp, struct mlx5_cqe64 *cqe64, + u16 tail, u16 head) +{ + u16 idx; + + do { + idx = tail & (qp->sq.wqe_cnt - 1); + if (idx == head) + break; + + tail = qp->sq.w_list[idx].next; + } while (1); + tail = qp->sq.w_list[idx].next; + qp->sq.last_poll = tail; +} + static void free_cq_buf(struct mlx5_ib_dev *dev, struct mlx5_ib_cq_buf *buf) { mlx5_frag_buf_free(dev->mdev, &buf->frag_buf); @@ -368,7 +384,7 @@ static void get_sig_err_item(struct mlx5 }

static void sw_comp(struct mlx5_ib_qp *qp, int num_entries, struct ib_wc *wc, - int *npolled, int is_send) + int *npolled, bool is_send) { struct mlx5_ib_wq *wq; unsigned int cur; @@ -383,10 +399,16 @@ static void sw_comp(struct mlx5_ib_qp *q return;

for (i = 0; i < cur && np < num_entries; i++) { - wc->wr_id = wq->wrid[wq->tail & (wq->wqe_cnt - 1)]; + unsigned int idx; + + idx = (is_send) ? wq->last_poll : wq->tail; + idx &= (wq->wqe_cnt - 1); + wc->wr_id = wq->wrid[idx]; wc->status = IB_WC_WR_FLUSH_ERR; wc->vendor_err = MLX5_CQE_SYNDROME_WR_FLUSH_ERR; wq->tail++; + if (is_send) + wq->last_poll = wq->w_list[idx].next; np++; wc->qp = &qp->ibqp; wc++; @@ -473,6 +495,7 @@ repoll: wqe_ctr = be16_to_cpu(cqe64->wqe_counter); idx = wqe_ctr & (wq->wqe_cnt - 1); handle_good_req(wc, cqe64, wq, idx); + handle_atomics(*cur_qp, cqe64, wq->last_poll, idx); wc->wr_id = wq->wrid[idx]; wq->tail = wq->wqe_head[idx] + 1; wc->status = IB_WC_SUCCESS; --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h @@ -282,6 +282,7 @@ struct mlx5_ib_wq { unsigned head; unsigned tail; u16 cur_post; + u16 last_poll; void *cur_edge; };

--- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3728,6 +3728,7 @@ static int __mlx5_ib_modify_qp(struct ib qp->sq.cur_post = 0; if (qp->sq.wqe_cnt) qp->sq.cur_edge = get_sq_edge(&qp->sq, 0); + qp->sq.last_poll = 0; qp->db.db[MLX5_RCV_DBR] = 0; qp->db.db[MLX5_SND_DBR] = 0; }

From: Xin Long lucien.xin@gmail.com

commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream.

It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later.

This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).

Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/xfrm/xfrm_user.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -110,7 +110,8 @@ static inline int verify_sec_ctx_len(str return 0;

uctx = nla_data(rt); - if (uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)) + if (uctx->len > nla_len(rt) || + uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)) return -EINVAL;

return 0;

From: YueHaibing yuehaibing@huawei.com

commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream.

After xfrm_add_policy add a policy, its ref is 2, then

xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu

xfrm_policy_destroy is called twice, which may leads to double free.

Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0

Fix this by use write_lock_bh in xfrm_policy_kill.

Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by: YueHaibing yuehaibing@huawei.com Acked-by: Timo Teräs timo.teras@iki.fi Acked-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/xfrm/xfrm_policy.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -431,7 +431,9 @@ EXPORT_SYMBOL(xfrm_policy_destroy);

static void xfrm_policy_kill(struct xfrm_policy *policy) { + write_lock_bh(&policy->lock); policy->walk.dead = 1; + write_unlock_bh(&policy->lock);

atomic_inc(&policy->genid);

From: David Howells dhowells@redhat.com

commit 4636cf184d6d9a92a56c2554681ea520dd4fe49a upstream.

Fix a couple of tracelines to indicate the usage count after the atomic op, not the usage count before it to be consistent with other afs and rxrpc trace lines.

Change the wording of the afs_call_trace_work trace ID label from "WORK" to "QUEUE" to reflect the fact that it's queueing work, not doing work.

Fixes: 341f741f04be ("afs: Refcount the afs_call struct") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/afs/rxrpc.c | 4 ++-- include/trace/events/afs.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -168,7 +168,7 @@ void afs_put_call(struct afs_call *call) int n = atomic_dec_return(&call->usage); int o = atomic_read(&net->nr_outstanding_calls);

- trace_afs_call(call, afs_call_trace_put, n + 1, o, + trace_afs_call(call, afs_call_trace_put, n, o, __builtin_return_address(0));

ASSERTCMP(n, >=, 0); @@ -704,7 +704,7 @@ static void afs_wake_up_async_call(struc

u = atomic_fetch_add_unless(&call->usage, 1, 0); if (u != 0) { - trace_afs_call(call, afs_call_trace_wake, u, + trace_afs_call(call, afs_call_trace_wake, u + 1, atomic_read(&call->net->nr_outstanding_calls), __builtin_return_address(0));

--- a/include/trace/events/afs.h +++ b/include/trace/events/afs.h @@ -233,7 +233,7 @@ enum afs_cb_break_reason { EM(afs_call_trace_get, "GET ") \ EM(afs_call_trace_put, "PUT ") \ EM(afs_call_trace_wake, "WAKE ") \ - E_(afs_call_trace_work, "WORK ") + E_(afs_call_trace_work, "QUEUE")

#define afs_server_traces \ EM(afs_server_trace_alloc, "ALLOC ") \

From: Johannes Berg johannes.berg@intel.com

commit 575a97acc3b7446094b0dcaf6285c7c6934c2477 upstream.

The he_sr_control field is just a u8, so le32_to_cpu() shouldn't be applied to it; this was evidently copied from ieee80211_he_oper_size(). Fix it, and also adjust the type of the local variable.

Fixes: ef11a931bd1c ("mac80211: HE: add Spatial Reuse element parsing support") Signed-off-by: Johannes Berg johannes.berg@intel.com Link: https://lore.kernel.org/r/20200325090918.dfe483b49e06.Ia53622f23b2610a2ae6ea... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/linux/ieee80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2102,14 +2102,14 @@ ieee80211_he_spr_size(const u8 *he_spr_i { struct ieee80211_he_spr *he_spr = (void *)he_spr_ie; u8 spr_len = sizeof(struct ieee80211_he_spr); - u32 he_spr_params; + u8 he_spr_params;

/* Make sure the input is not NULL */ if (!he_spr_ie) return 0;

/* Calc required length */ - he_spr_params = le32_to_cpu(he_spr->he_sr_control); + he_spr_params = he_spr->he_sr_control; if (he_spr_params & IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT) spr_len++; if (he_spr_params & IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT)

From: Haishuang Yan yanhaishuang@cmss.chinamobile.com

commit 41e9ec5a54f95eee1a57c8d26ab70e0492548c1b upstream.

Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at the right place.

Fixes: a908fdec3dda ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table") Fixes: 7d2086871762 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table") Signed-off-by: Haishuang Yan yanhaishuang@cmss.chinamobile.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/netfilter/nf_flow_table_ip.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/netfilter/nf_flow_table_ip.c +++ b/net/netfilter/nf_flow_table_ip.c @@ -189,6 +189,7 @@ static int nf_flow_tuple_ip(struct sk_bu if (!pskb_may_pull(skb, thoff + sizeof(*ports))) return -1;

+ iph = ip_hdr(skb); ports = (struct flow_ports *)(skb_network_header(skb) + thoff);

tuple->src_v4.s_addr = iph->saddr; @@ -449,6 +450,7 @@ static int nf_flow_tuple_ipv6(struct sk_ if (!pskb_may_pull(skb, thoff + sizeof(*ports))) return -1;

+ ip6h = ipv6_hdr(skb); ports = (struct flow_ports *)(skb_network_header(skb) + thoff);

tuple->src_v6 = ip6h->saddr;

From: Pablo Neira Ayuso pablo@netfilter.org

commit 76a109fac206e158eb3c967af98c178cff738e6a upstream.

Make sure the forward action is only used from ingress.

Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/netfilter/nft_fwd_netdev.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/net/netfilter/nft_fwd_netdev.c +++ b/net/netfilter/nft_fwd_netdev.c @@ -190,6 +190,13 @@ nla_put_failure: return -1; }

+static int nft_fwd_validate(const struct nft_ctx *ctx, + const struct nft_expr *expr, + const struct nft_data **data) +{ + return nft_chain_validate_hooks(ctx->chain, (1 << NF_NETDEV_INGRESS)); +} + static struct nft_expr_type nft_fwd_netdev_type; static const struct nft_expr_ops nft_fwd_neigh_netdev_ops = { .type = &nft_fwd_netdev_type, @@ -197,6 +204,7 @@ static const struct nft_expr_ops nft_fwd .eval = nft_fwd_neigh_eval, .init = nft_fwd_neigh_init, .dump = nft_fwd_neigh_dump, + .validate = nft_fwd_validate, };

static const struct nft_expr_ops nft_fwd_netdev_ops = { @@ -205,6 +213,7 @@ static const struct nft_expr_ops nft_fwd .eval = nft_fwd_netdev_eval, .init = nft_fwd_netdev_init, .dump = nft_fwd_netdev_dump, + .validate = nft_fwd_validate, .offload = nft_fwd_netdev_offload, };

From: Kai-Heng Feng kai.heng.feng@canonical.com

commit d944b27df121e2ee854a6c2fad13d6c6300792d4 upstream.

Nvidia card may come with a "phantom" UCSI device, and its driver gets stuck in probe routine, prevents any system PM operations like suspend.

There's an unaccounted case that the target time can equal to jiffies in gpu_i2c_check_status(), let's solve that by using readl_poll_timeout() instead of jiffies comparison functions.

Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU") Suggested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Ajay Gupta ajayg@nvidia.com Tested-by: Ajay Gupta ajayg@nvidia.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/i2c/busses/i2c-nvidia-gpu.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)

--- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -8,6 +8,7 @@ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/interrupt.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/platform_device.h> @@ -75,20 +76,15 @@ static void gpu_enable_i2c_bus(struct gp

static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) { - unsigned long target = jiffies + msecs_to_jiffies(1000); u32 val; + int ret;

- do { - val = readl(i2cd->regs + I2C_MST_CNTL); - if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER)) - break; - if ((val & I2C_MST_CNTL_STATUS) != - I2C_MST_CNTL_STATUS_BUS_BUSY) - break; - usleep_range(500, 600); - } while (time_is_after_jiffies(target)); + ret = readl_poll_timeout(i2cd->regs + I2C_MST_CNTL, val, + !(val & I2C_MST_CNTL_CYCLE_TRIGGER) || + (val & I2C_MST_CNTL_STATUS) != I2C_MST_CNTL_STATUS_BUS_BUSY, + 500, 1000 * USEC_PER_MSEC);

- if (time_is_before_jiffies(target)) { + if (ret) { dev_err(i2cd->dev, "i2c timeout error %x\n", val); return -ETIMEDOUT; }

From: Andrii Nakryiko andriin@fb.com

commit 62039c30c19dcab96621e074aeeb90da7100def7 upstream.

Local storage array isn't initialized, so if cgroup storage allocation fails for BPF_CGROUP_STORAGE_SHARED, error handling code will attempt to free uninitialized pointer for BPF_CGROUP_STORAGE_PERCPU storage type. Avoid this by always initializing storage pointers to NULLs.

Fixes: 8bad74f9840f ("bpf: extend cgroup bpf core to allow multiple cgroup storage types") Signed-off-by: Andrii Nakryiko andriin@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200309222756.1018737-1-andriin@fb.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/bpf/cgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -303,8 +303,8 @@ int __cgroup_bpf_attach(struct cgroup *c { struct list_head *progs = &cgrp->bpf.progs[type]; struct bpf_prog *old_prog = NULL; - struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE], - *old_storage[MAX_BPF_CGROUP_STORAGE_TYPE] = {NULL}; + struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE] = {}; + struct bpf_cgroup_storage *old_storage[MAX_BPF_CGROUP_STORAGE_TYPE] = {}; enum bpf_cgroup_storage_type stype; struct bpf_prog_list *pl; bool pl_was_allocated;

From: John Fastabend john.fastabend@gmail.com

commit 90db6d772f749e38171d04619a5e3cd8804a6d02 upstream.

The bucket->lock is not needed in the sock_hash_free and sock_map_free calls, in fact it is causing a splat due to being inside rcu block.

| BUG: sleeping function called from invalid context at net/core/sock.c:2935 | in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 62, name: kworker/0:1 | 3 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffff8881381f6df8 (&stab->lock){+...}, at: sock_map_free+0x26/0x180 | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04008-g7b083332376e #454 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep.cold+0xa6/0xb6 | lock_sock_nested+0x28/0x90 | sock_map_free+0x5f/0x180 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50

The reason we have stab->lock and bucket->locks in sockmap code is to handle checking EEXIST in update/delete cases. We need to be careful during an update operation that we check for EEXIST and we need to ensure that the psock object is not in some partial state of removal/insertion while we do this. So both map_update_common and sock_map_delete need to guard from being run together potentially deleting an entry we are checking, etc. But by the time we get to the tear-down code in sock_{ma[|hash}_free we have already disconnected the map and we just did synchronize_rcu() in the line above so no updates/deletes should be in flight. Because of this we can drop the bucket locks from the map free'ing code, noting no update/deletes can be in-flight.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: Jakub Sitnicki jakub@cloudflare.com Suggested-by: Jakub Sitnicki jakub@cloudflare.com Signed-off-by: John Fastabend john.fastabend@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/158385850787.30597.8346421465837046618.stgit@joh... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/core/sock_map.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -233,8 +233,11 @@ static void sock_map_free(struct bpf_map struct bpf_stab *stab = container_of(map, struct bpf_stab, map); int i;

+ /* After the sync no updates or deletes will be in-flight so it + * is safe to walk map and remove entries without risking a race + * in EEXIST update case. + */ synchronize_rcu(); - raw_spin_lock_bh(&stab->lock); for (i = 0; i < stab->map.max_entries; i++) { struct sock **psk = &stab->sks[i]; struct sock *sk; @@ -248,7 +251,6 @@ static void sock_map_free(struct bpf_map release_sock(sk); } } - raw_spin_unlock_bh(&stab->lock);

/* wait for psock readers accessing its map link */ synchronize_rcu(); @@ -863,10 +865,13 @@ static void sock_hash_free(struct bpf_ma struct hlist_node *node; int i;

+ /* After the sync no updates or deletes will be in-flight so it + * is safe to walk map and remove entries without risking a race + * in EEXIST update case. + */ synchronize_rcu(); for (i = 0; i < htab->buckets_num; i++) { bucket = sock_hash_select_bucket(htab, i); - raw_spin_lock_bh(&bucket->lock); hlist_for_each_entry_safe(elem, node, &bucket->head, node) { hlist_del_rcu(&elem->node); lock_sock(elem->sk); @@ -875,7 +880,6 @@ static void sock_hash_free(struct bpf_ma rcu_read_unlock(); release_sock(elem->sk); } - raw_spin_unlock_bh(&bucket->lock); }

/* wait for psock readers accessing its map link */

From: Torsten Hilbrich torsten.hilbrich@secunet.com

commit 2a9de3af21aa8c31cd68b0b39330d69f8c1e59df upstream.

The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address.

In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked.

Using the same goto-label discard in this case to fix this problem.

Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Torsten Hilbrich torsten.hilbrich@secunet.com Reviewed-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/ipv6/ip6_vti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -311,7 +311,7 @@ static int vti6_rcv(struct sk_buff *skb)

if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) { rcu_read_unlock(); - return 0; + goto discard; }

ipv6h = ipv6_hdr(skb);

From: Yubo Xie yuboxie@microsoft.com

[ Upstream commit 0af3e137c144377fbaf5025ba784ff5ba7ad40c9 ]

hyperv_timer.c exports hyperv_cs, which is used by stimers and the timesync mechanism. However, the clocksource dependency is not needed: these mechanisms only depend on the partition reference counter (which can be read via a MSR or via the TSC Reference Page).

Introduce the (function) pointer hv_read_reference_counter, as an embodiment of the partition reference counter read, and export it in place of the hyperv_cs pointer. The latter can be removed.

This should clarify that there's no relationship between Hyper-V stimers & timesync and the Linux clocksource abstractions. No functional or semantic change.

Suggested-by: Michael Kelley mikelley@microsoft.com Signed-off-by: Andrea Parri parri.andrea@gmail.com Reviewed-by: Michael Kelley mikelley@microsoft.com Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20200109160650.16150-2-parri.andrea@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clocksource/hyperv_timer.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/clocksource/hyperv_timer.c +++ b/drivers/clocksource/hyperv_timer.c @@ -327,7 +327,8 @@ static u64 notrace read_hv_clock_tsc(str

static u64 read_hv_sched_clock_tsc(void) { - return read_hv_clock_tsc(NULL) - hv_sched_clock_offset; + return (read_hv_clock_tsc(NULL) - hv_sched_clock_offset) * + (NSEC_PER_SEC / HV_CLOCK_HZ); }

static struct clocksource hyperv_cs_tsc = { @@ -352,7 +353,8 @@ static u64 notrace read_hv_clock_msr(str

static u64 read_hv_sched_clock_msr(void) { - return read_hv_clock_msr(NULL) - hv_sched_clock_offset; + return (read_hv_clock_msr(NULL) - hv_sched_clock_offset) * + (NSEC_PER_SEC / HV_CLOCK_HZ); }

static struct clocksource hyperv_cs_msr = {

From: Pawel Dembicki paweldembicki@gmail.com

commit 007d20dca2376a751b1dad03442f118438b7e65e upstream.

ASKEY WWHC050 is a mcie LTE modem. The oem configuration states:

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution.

Co-developed-by: Cezary Jackiewicz cezary@eko.one.pl Signed-off-by: Cezary Jackiewicz cezary@eko.one.pl Signed-off-by: Pawel Dembicki paweldembicki@gmail.com Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1992,6 +1992,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ + { USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */ + .driver_info = RSVD(1) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */ .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */

From: Pawel Dembicki paweldembicki@gmail.com

commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream.

This modem is embedded on dlink dwr-960 router. The oem configuration states:

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution

Signed-off-by: Pawel Dembicki paweldembicki@gmail.com Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1992,6 +1992,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ + { USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff), /* Wistron Neweb D19Q1 */ + .driver_info = RSVD(1) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */ .driver_info = RSVD(1) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */

From: Qiujun Huang hqjagain@gmail.com

commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream.

Fix slab-out-of-bounds read in the interrupt-URB completion handler.

The boundary condition should be (length - 1) as we access data[position + 1].

Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang hqjagain@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/io_edgeport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -710,7 +710,7 @@ static void edge_interrupt_callback(stru /* grab the txcredits for the ports if available */ position = 2; portNumber = 0; - while ((position < length) && + while ((position < length - 1) && (portNumber < edge_serial->serial->num_ports)) { txCredits = data[position] | (data[position+1] << 8); if (txCredits) {