From: Steev Klimaszewski steev@kali.org
[ Upstream commit 382e3e0eb6a83f1cf73d4dfa3448ade1ed721f22 ]
Disable the crypto block due to it causing an SError in qce_start() on the C630, which happens upon every boot when cryptomanager tests are enabled.
Signed-off-by: Steev Klimaszewski steev@kali.org [bjorn: Reworked commit message] Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20211105035235.2392-1-steev@kali.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index e080c317b5e3..08d0e67751ed 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -618,3 +618,8 @@ &wifi {
qcom,snoc-host-cap-8bit-quirk; }; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status= "disable"; +};
From: Lucas Zampieri lzampier@redhat.com
[ Upstream commit 25666e8ccd952627899b09b68f7c9b68cfeaf028 ]
As of logitech lightspeed receiver fw version 04.02.B0009, HIDPP_PARAM_DEVICE_INFO is being reported as 0x11.
With patch "HID: logitech-dj: add support for the new lightspeed receiver iteration", the mouse starts to error out with: logitech-djreceiver: unusable device of type UNKNOWN (0x011) connected on slot 1 and becomes unusable.
This has been noticed on a Logitech G Pro X Superlight fw MPM 25.01.B0018.
Signed-off-by: Lucas Zampieri lzampier@redhat.com Acked-by: Nestor Lopez Casado nlopezcasad@logitech.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-logitech-dj.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index a311b0a33eba..587259b3db97 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1000,6 +1000,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev, workitem.reports_supported |= STD_KEYBOARD; break; case 0x0f: + case 0x11: device_type = "eQUAD Lightspeed 1.2"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); workitem.reports_supported |= STD_KEYBOARD;
From: Lina Wang lina.wang@mediatek.com
[ Upstream commit 4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]
in tunnel mode, if outer interface(ipv4) is less, it is easily to let inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message is received. When send again, packets are fragmentized with 1280, they are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2: if (IPv4 path MTU - 20) is less than 1280 if packet is larger than 1280 bytes Send ICMPv6 "packet too big" with MTU=1280 Drop packet else Encapsulate but do not set the Don't Fragment flag in the IPv4 header. The resulting IPv4 packet might be fragmented by the IPv4 layer on the encapsulator or by some router along the IPv4 path. endif else if packet is larger than (IPv4 path MTU - 20) Send ICMPv6 "packet too big" with MTU = (IPv4 path MTU - 20). Drop packet. else Encapsulate and set the Don't Fragment flag in the IPv4 header. endif endif Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation. No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized, then tunneled with IPv4(No.49& No.50), which obey spec. And received peer cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50) 49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44) 50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000) 51 2002::10 2002::11 180 Echo (ping) request 52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below: 1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2] 2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50) 3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang lina.wang@mediatek.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/xfrm6_output.c | 16 ++++++++++++++++ net/xfrm/xfrm_interface.c | 5 ++++- 2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c index 6abb45a67199..ee349c243878 100644 --- a/net/ipv6/xfrm6_output.c +++ b/net/ipv6/xfrm6_output.c @@ -52,6 +52,19 @@ static int __xfrm6_output_finish(struct net *net, struct sock *sk, struct sk_buf return xfrm_output(sk, skb); }
+static int xfrm6_noneed_fragment(struct sk_buff *skb) +{ + struct frag_hdr *fh; + u8 prevhdr = ipv6_hdr(skb)->nexthdr; + + if (prevhdr != NEXTHDR_FRAGMENT) + return 0; + fh = (struct frag_hdr *)(skb->data + sizeof(struct ipv6hdr)); + if (fh->nexthdr == NEXTHDR_ESP || fh->nexthdr == NEXTHDR_AUTH) + return 1; + return 0; +} + static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb) { struct dst_entry *dst = skb_dst(skb); @@ -80,6 +93,9 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb) xfrm6_local_rxpmtu(skb, mtu); kfree_skb(skb); return -EMSGSIZE; + } else if (toobig && xfrm6_noneed_fragment(skb)) { + skb->ignore_df = 1; + goto skip_frag; } else if (!skb->ignore_df && toobig && skb->sk) { xfrm_local_error(skb, mtu); kfree_skb(skb); diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c index 4420c8fd318a..da518b4ca84c 100644 --- a/net/xfrm/xfrm_interface.c +++ b/net/xfrm/xfrm_interface.c @@ -303,7 +303,10 @@ xfrmi_xmit2(struct sk_buff *skb, struct net_device *dev, struct flowi *fl) if (mtu < IPV6_MIN_MTU) mtu = IPV6_MIN_MTU;
- icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); + if (skb->len > 1280) + icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); + else + goto xmit; } else { if (!(ip_hdr(skb)->frag_off & htons(IP_DF))) goto xmit;
From: Daniel Palmer daniel@0x0f.com
[ Upstream commit ea49432d184a6a09f84461604b7711a4e9f5ec9c ]
The mstar SoCs have an arch timer but HAVE_ARM_ARCH_TIMER wasn't selected. If MSC313E_TIMER isn't selected then the kernel gets stuck at boot because there are no timers available.
Signed-off-by: Daniel Palmer daniel@0x0f.com Link: https://lore.kernel.org/r/20220301104349.3040422-1-daniel@0x0f.com' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-mstar/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig index 576d1ab293c8..30560fdf87ed 100644 --- a/arch/arm/mach-mstar/Kconfig +++ b/arch/arm/mach-mstar/Kconfig @@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7 depends on ARCH_MULTI_V7 select ARM_GIC select ARM_HEAVY_MB + select HAVE_ARM_ARCH_TIMER select MST_IRQ help Support for newer MStar/Sigmastar SoC families that are
From: "Michael S. Tsirkin" mst@redhat.com
[ Upstream commit 0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]
A common pattern for device reset is currently: vdev->config->reset(vdev); .. cleanup ..
reset prevents new interrupts from arriving and waits for interrupt handlers to finish.
However if - as is common - the handler queues a work request which is flushed during the cleanup stage, we have code adding buffers / trying to get buffers while device is reset. Not good.
This was reproduced by running modprobe virtio_console modprobe -r virtio_console in a loop.
Fix this up by calling virtio_break_device + flush before reset.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/virtio_console.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 673522874cec..3dd4deb60adb 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1959,6 +1959,13 @@ static void virtcons_remove(struct virtio_device *vdev) list_del(&portdev->list); spin_unlock_irq(&pdrvdata_lock);
+ /* Device is going away, exit any polling for buffers */ + virtio_break_device(vdev); + if (use_multiport(portdev)) + flush_work(&portdev->control_work); + else + flush_work(&portdev->config_work); + /* Disable interrupts for vqs */ vdev->config->reset(vdev); /* Finish up work that's lined up */
From: Si-Wei Liu si-wei.liu@oracle.com
[ Upstream commit 30c22f3816ffef8aa21a000e93c4ee1402a6ea65 ]
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements: "VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come together with CTRL_VQ. However, there's nowhere in the upper layer to guarantee this assumption would hold. Were there an untrusted driver sending down MQ without CTRL_VQ, it would compromise various spots for e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end up with immediate panic or security loophole as of today's code, the chance for this to be taken advantage of due to future code change is not zero.
Harden the crispy assumption by failing the set_driver_features() call when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is renamed to verify_driver_features() to reflect the fact that it now does more than just validate the minimum features. verify_driver_features() is now used to accommodate various checks against the driver features for set_driver_features().
Signed-off-by: Si-Wei Liu si-wei.liu@oracle.com Link: https://lore.kernel.org/r/1642206481-30721-3-git-send-email-si-wei.liu@oracl... Signed-off-by: Michael S. Tsirkin mst@redhat.com Reviewed-by: Eli Cohen elic@nvidia.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 65d6f8fd81e7..577ff786f11b 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -1482,11 +1482,25 @@ static u64 mlx5_vdpa_get_features(struct vdpa_device *vdev) return ndev->mvdev.mlx_features; }
-static int verify_min_features(struct mlx5_vdpa_dev *mvdev, u64 features) +static int verify_driver_features(struct mlx5_vdpa_dev *mvdev, u64 features) { + /* Minimum features to expect */ if (!(features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM))) return -EOPNOTSUPP;
+ /* Double check features combination sent down by the driver. + * Fail invalid features due to absence of the depended feature. + * + * Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit + * requirements: "VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ". + * By failing the invalid features sent down by untrusted drivers, + * we're assured the assumption made upon is_index_valid() and + * is_ctrl_vq_idx() will not be compromised. + */ + if ((features & (BIT_ULL(VIRTIO_NET_F_MQ) | BIT_ULL(VIRTIO_NET_F_CTRL_VQ))) == + BIT_ULL(VIRTIO_NET_F_MQ)) + return -EINVAL; + return 0; }
@@ -1544,7 +1558,7 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
print_features(mvdev, features, true);
- err = verify_min_features(mvdev, features); + err = verify_driver_features(mvdev, features); if (err) return err;
From: Kai Lueke kailueke@linux.microsoft.com
[ Upstream commit a3d9001b4e287fc043e5539d03d71a32ab114bcb ]
This reverts commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID 0 was meant to be used for configuring the policy/state without matching for a specific interface (e.g., Cilium is affected, see https://github.com/cilium/cilium/pull/18789 and https://github.com/cilium/cilium/pull/19019).
Signed-off-by: Kai Lueke kailueke@linux.microsoft.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_user.c | 21 +++------------------ 1 file changed, 3 insertions(+), 18 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index d0fdfbf4c5f7..518462059a9a 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -629,13 +629,8 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
xfrm_smark_init(attrs, &x->props.smark);
- if (attrs[XFRMA_IF_ID]) { + if (attrs[XFRMA_IF_ID]) x->if_id = nla_get_u32(attrs[XFRMA_IF_ID]); - if (!x->if_id) { - err = -EINVAL; - goto error; - } - }
err = __xfrm_init_state(x, false, attrs[XFRMA_OFFLOAD_DEV]); if (err) @@ -1371,13 +1366,8 @@ static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh,
mark = xfrm_mark_get(attrs, &m);
- if (attrs[XFRMA_IF_ID]) { + if (attrs[XFRMA_IF_ID]) if_id = nla_get_u32(attrs[XFRMA_IF_ID]); - if (!if_id) { - err = -EINVAL; - goto out_noput; - } - }
if (p->info.seq) { x = xfrm_find_acq_byseq(net, mark, p->info.seq); @@ -1690,13 +1680,8 @@ static struct xfrm_policy *xfrm_policy_construct(struct net *net, struct xfrm_us
xfrm_mark_get(attrs, &xp->mark);
- if (attrs[XFRMA_IF_ID]) { + if (attrs[XFRMA_IF_ID]) xp->if_id = nla_get_u32(attrs[XFRMA_IF_ID]); - if (!xp->if_id) { - err = -EINVAL; - goto error; - } - }
return xp; error:
From: Stefano Garzarella sgarzare@redhat.com
[ Upstream commit 32f1b53fe8f03d962423ba81f8e92af5839814da ]
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock` is not initialized.
Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella sgarzare@redhat.com Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/virtio/virtio_test.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index cb3f29c09aff..23f142af544a 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -130,6 +130,7 @@ static void vdev_info_init(struct vdev_info* dev, unsigned long long features) memset(dev, 0, sizeof *dev); dev->vdev.features = features; INIT_LIST_HEAD(&dev->vdev.vqs); + spin_lock_init(&dev->vdev.vqs_list_lock); dev->buf_size = 1024; dev->buf = malloc(dev->buf_size); assert(dev->buf);
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]
When the driver fails to register net device, it should free the DMA region first, and then do other cleanup.
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sun/sunhme.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 54b53dbdb33c..69fc47089e62 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -3163,7 +3163,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev, if (err) { printk(KERN_ERR "happymeal(PCI): Cannot register net device, " "aborting.\n"); - goto err_out_iounmap; + goto err_out_free_coherent; }
pci_set_drvdata(pdev, hp); @@ -3196,6 +3196,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
return 0;
+err_out_free_coherent: + dma_free_coherent(hp->dma_dev, PAGE_SIZE, + hp->happy_block, hp->hblock_dvma); + err_out_iounmap: iounmap(hp->gregs);
From: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com
[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL") commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works properly again.
Signed-off-by: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index af5bb8fedfea..ac69ec8fb37a 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1804,11 +1804,6 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc) */ int gpiochip_generic_request(struct gpio_chip *gc, unsigned offset) { -#ifdef CONFIG_PINCTRL - if (list_empty(&gc->gpiodev->pin_ranges)) - return 0; -#endif - return pinctrl_gpio_request(gc->gpiodev->base + offset); } EXPORT_SYMBOL_GPL(gpiochip_generic_request); @@ -1820,11 +1815,6 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_request); */ void gpiochip_generic_free(struct gpio_chip *gc, unsigned offset) { -#ifdef CONFIG_PINCTRL - if (list_empty(&gc->gpiodev->pin_ranges)) - return; -#endif - pinctrl_gpio_free(gc->gpiodev->base + offset); } EXPORT_SYMBOL_GPL(gpiochip_generic_free);
On Wed, Mar 16, 2022 at 3:17 PM Sasha Levin sashal@kernel.org wrote:
From: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com
[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL") commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works properly again.
Signed-off-by: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org
I think you should not apply this for stable, because we will revert the revert.
Yours, Linus Walleij
On Wed, Mar 16, 2022 at 05:06:47PM +0100, Linus Walleij wrote:
On Wed, Mar 16, 2022 at 3:17 PM Sasha Levin sashal@kernel.org wrote:
From: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com
[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL") commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works properly again.
Signed-off-by: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org
I think you should not apply this for stable, because we will revert the revert.
Okay, I'll give it a week to soak and if the revert is in by then I can just pick it too for the sake of completeness.
On Wed, Mar 16, 2022 at 5:40 PM Sasha Levin sashal@kernel.org wrote:
On Wed, Mar 16, 2022 at 05:06:47PM +0100, Linus Walleij wrote:
On Wed, Mar 16, 2022 at 3:17 PM Sasha Levin sashal@kernel.org wrote:
From: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com
[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL") commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works properly again.
Signed-off-by: Marcelo Roberto Jimenez marcelo.jimenez@gmail.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org
I think you should not apply this for stable, because we will revert the revert.
Okay, I'll give it a week to soak and if the revert is in by then I can just pick it too for the sake of completeness.
The revert of the revert is already in Linus' tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
Yours, Linus Walleij
From: Biju Das biju.das.jz@bp.renesas.com
[ Upstream commit 1a4e53d2fc4f68aa654ad96d13ad042e1a8e8a7d ]
max_seg_size is unsigned int and it can have a value up to 2^32 (for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX) When this value is used in min_t() as an integer type, it becomes -1 and the value of sgs becomes 0.
Fix this issue by replacing the 'int' data type with 'unsigned int' in min_t().
Signed-off-by: Biju Das biju.das.jz@bp.renesas.com Reviewed-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8c261eac2cee..2396565fc91b 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -881,10 +881,10 @@ int spi_map_buf(struct spi_controller *ctlr, struct device *dev, int i, ret;
if (vmalloced_buf || kmap_buf) { - desc_len = min_t(int, max_seg_size, PAGE_SIZE); + desc_len = min_t(unsigned int, max_seg_size, PAGE_SIZE); sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len); } else if (virt_addr_valid(buf)) { - desc_len = min_t(int, max_seg_size, ctlr->max_dma_len); + desc_len = min_t(unsigned int, max_seg_size, ctlr->max_dma_len); sgs = DIV_ROUND_UP(len, desc_len); } else { return -EINVAL;
From: "Minghao Chi (CGEL ZTE)" chi.minghao@zte.com.cn
[ Upstream commit 2a760554dcba450d3ad61b32375b50ed6d59a87c ]
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Minghao Chi (CGEL ZTE) chi.minghao@zte.com.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/8390/mcf8390.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c index 4ad8031ab669..065fdbe66c42 100644 --- a/drivers/net/ethernet/8390/mcf8390.c +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -406,12 +406,12 @@ static int mcf8390_init(struct net_device *dev) static int mcf8390_probe(struct platform_device *pdev) { struct net_device *dev; - struct resource *mem, *irq; + struct resource *mem; resource_size_t msize; - int ret; + int ret, irq;
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (irq == NULL) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) { dev_err(&pdev->dev, "no IRQ specified?\n"); return -ENXIO; } @@ -434,7 +434,7 @@ static int mcf8390_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); platform_set_drvdata(pdev, dev);
- dev->irq = irq->start; + dev->irq = irq; dev->base_addr = mem->start;
ret = mcf8390_init(dev);
linux-stable-mirror@lists.linaro.org
-
Linus Walleij -
Sasha Levin