From: Thomas Haemmerle thomas.haemmerle@wolfvision.net

commit 72ee48ee8925446eaeda8e4ef3f2eb16b4a93d2a upstream.

Currently, the UVC function is activated when open on the corresponding v4l2 device is called. On another open the activation of the function fails since the deactivation counter in `usb_function_activate` equals 0. However the error is not returned to userspace since the open of the v4l2 device is successful.

On a close the function is deactivated (since deactivation counter still equals 0) and the video is disabled in `uvc_v4l2_release`, although the UVC application potentially is streaming.

Move activation of UVC function to subscription on UVC_EVENT_SETUP because there we can guarantee for a userspace application utilizing UVC. Block subscription on UVC_EVENT_SETUP while another application already is subscribed to it, indicated by `bool func_connected` in `struct uvc_device`. Extend the `struct uvc_file_handle` with member `bool is_uvc_app_handle` to tag it as the handle used by the userspace UVC application.

With this a process is able to check capabilities of the v4l2 device without deactivating the function for the actual UVC application.

Reviewed-By: Michael Tretter m.tretter@pengutronix.de Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Thomas Haemmerle thomas.haemmerle@wolfvision.net Signed-off-by: Michael Tretter m.tretter@pengutronix.de Signed-off-by: Michael Grzeschik m.grzeschik@pengutronix.de Acked-by: Felipe Balbi balbi@kernel.org Link: https://lore.kernel.org/r/20211003201355.24081-1-m.grzeschik@pengutronix.de Cc: Dan Vacura W36195@motorola.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/function/uvc.h | 2 + drivers/usb/gadget/function/uvc_v4l2.c | 49 ++++++++++++++++++++++++++++----- 2 files changed, 44 insertions(+), 7 deletions(-)

--- a/drivers/usb/gadget/function/uvc.h +++ b/drivers/usb/gadget/function/uvc.h @@ -126,6 +126,7 @@ struct uvc_device { enum uvc_state state; struct usb_function func; struct uvc_video video; + bool func_connected;

/* Descriptors */ struct { @@ -156,6 +157,7 @@ static inline struct uvc_device *to_uvc( struct uvc_file_handle { struct v4l2_fh vfh; struct uvc_video *device; + bool is_uvc_app_handle; };

#define to_uvc_file_handle(handle) \ --- a/drivers/usb/gadget/function/uvc_v4l2.c +++ b/drivers/usb/gadget/function/uvc_v4l2.c @@ -227,17 +227,55 @@ static int uvc_v4l2_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub) { + struct uvc_device *uvc = video_get_drvdata(fh->vdev); + struct uvc_file_handle *handle = to_uvc_file_handle(fh); + int ret; + if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST) return -EINVAL;

- return v4l2_event_subscribe(fh, sub, 2, NULL); + if (sub->type == UVC_EVENT_SETUP && uvc->func_connected) + return -EBUSY; + + ret = v4l2_event_subscribe(fh, sub, 2, NULL); + if (ret < 0) + return ret; + + if (sub->type == UVC_EVENT_SETUP) { + uvc->func_connected = true; + handle->is_uvc_app_handle = true; + uvc_function_connect(uvc); + } + + return 0; +} + +static void uvc_v4l2_disable(struct uvc_device *uvc) +{ + uvc->func_connected = false; + uvc_function_disconnect(uvc); + uvcg_video_enable(&uvc->video, 0); + uvcg_free_buffers(&uvc->video.queue); }

static int uvc_v4l2_unsubscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub) { - return v4l2_event_unsubscribe(fh, sub); + struct uvc_device *uvc = video_get_drvdata(fh->vdev); + struct uvc_file_handle *handle = to_uvc_file_handle(fh); + int ret; + + ret = v4l2_event_unsubscribe(fh, sub); + if (ret < 0) + return ret; + + if (sub->type == UVC_EVENT_SETUP && handle->is_uvc_app_handle) { + uvc_v4l2_disable(uvc); + handle->is_uvc_app_handle = false; + } + + return 0; }

static long @@ -292,7 +330,6 @@ uvc_v4l2_open(struct file *file) handle->device = &uvc->video; file->private_data = &handle->vfh;

- uvc_function_connect(uvc); return 0; }

@@ -304,11 +341,9 @@ uvc_v4l2_release(struct file *file) struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data); struct uvc_video *video = handle->device;

- uvc_function_disconnect(uvc); - mutex_lock(&video->mutex); - uvcg_video_enable(video, 0); - uvcg_free_buffers(&video->queue); + if (handle->is_uvc_app_handle) + uvc_v4l2_disable(uvc); mutex_unlock(&video->mutex);

file->private_data = NULL;

From: xiazhengqiao xiazhengqiao@huaqin.corp-partner.google.com

commit caff009098e6cf59fd6ac21c3a3befcc854978b4 upstream.

Add one additional hammer-like device.

Signed-off-by: xiazhengqiao xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-pa... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-google-hammer.c | 2 ++ drivers/hid/hid-ids.h | 1 + 2 files changed, 3 insertions(+)

--- a/drivers/hid/hid-google-hammer.c +++ b/drivers/hid/hid-google-hammer.c @@ -586,6 +586,8 @@ static const struct hid_device_id hammer { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_DON) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, + USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_EEL) }, + { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) }, --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -496,6 +496,7 @@ #define USB_DEVICE_ID_GOOGLE_MAGNEMITE 0x503d #define USB_DEVICE_ID_GOOGLE_MOONBALL 0x5044 #define USB_DEVICE_ID_GOOGLE_DON 0x5050 +#define USB_DEVICE_ID_GOOGLE_EEL 0x5057

#define USB_VENDOR_ID_GOTOP 0x08f2 #define USB_DEVICE_ID_SUPER_Q2 0x007f

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit f83baa0cb6cfc92ebaf7f9d3a99d7e34f2e77a8a upstream.

A number of HID drivers already call hid_is_using_ll_driver() but only for the detection of if this is a USB device or not. Make this more obvious by creating hid_is_usb() and calling the function that way.

Also converts the existing hid_is_using_ll_driver() functions to use the new call.

Cc: Jiri Kosina jikos@kernel.org Cc: Benjamin Tissoires benjamin.tissoires@redhat.com Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Tested-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-asus.c | 6 ++---- drivers/hid/hid-logitech-dj.c | 2 +- drivers/hid/hid-u2fzero.c | 2 +- drivers/hid/hid-uclogic-params.c | 3 +-- drivers/hid/wacom_sys.c | 2 +- include/linux/hid.h | 5 +++++ 6 files changed, 11 insertions(+), 9 deletions(-)

--- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -1028,8 +1028,7 @@ static int asus_probe(struct hid_device if (drvdata->quirks & QUIRK_IS_MULTITOUCH) drvdata->tp = &asus_i2c_tp;

- if ((drvdata->quirks & QUIRK_T100_KEYBOARD) && - hid_is_using_ll_driver(hdev, &usb_hid_driver)) { + if ((drvdata->quirks & QUIRK_T100_KEYBOARD) && hid_is_usb(hdev)) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent);

if (intf->altsetting->desc.bInterfaceNumber == T100_TPAD_INTF) { @@ -1057,8 +1056,7 @@ static int asus_probe(struct hid_device drvdata->tp = &asus_t100chi_tp; }

- if ((drvdata->quirks & QUIRK_MEDION_E1239T) && - hid_is_using_ll_driver(hdev, &usb_hid_driver)) { + if ((drvdata->quirks & QUIRK_MEDION_E1239T) && hid_is_usb(hdev)) { struct usb_host_interface *alt = to_usb_interface(hdev->dev.parent)->altsetting;

--- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1777,7 +1777,7 @@ static int logi_dj_probe(struct hid_devi case recvr_type_bluetooth: no_dj_interfaces = 2; break; case recvr_type_dinovo: no_dj_interfaces = 2; break; } - if (hid_is_using_ll_driver(hdev, &usb_hid_driver)) { + if (hid_is_usb(hdev)) { intf = to_usb_interface(hdev->dev.parent); if (intf && intf->altsetting->desc.bInterfaceNumber >= no_dj_interfaces) { --- a/drivers/hid/hid-u2fzero.c +++ b/drivers/hid/hid-u2fzero.c @@ -290,7 +290,7 @@ static int u2fzero_probe(struct hid_devi unsigned int minor; int ret;

- if (!hid_is_using_ll_driver(hdev, &usb_hid_driver)) + if (!hid_is_usb(hdev)) return -EINVAL;

dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL); --- a/drivers/hid/hid-uclogic-params.c +++ b/drivers/hid/hid-uclogic-params.c @@ -843,8 +843,7 @@ int uclogic_params_init(struct uclogic_p struct uclogic_params p = {0, };

/* Check arguments */ - if (params == NULL || hdev == NULL || - !hid_is_using_ll_driver(hdev, &usb_hid_driver)) { + if (params == NULL || hdev == NULL || !hid_is_usb(hdev)) { rc = -EINVAL; goto cleanup; } --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -2217,7 +2217,7 @@ static void wacom_update_name(struct wac if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) { char *product_name = wacom->hdev->name;

- if (hid_is_using_ll_driver(wacom->hdev, &usb_hid_driver)) { + if (hid_is_usb(wacom->hdev)) { struct usb_interface *intf = to_usb_interface(wacom->hdev->dev.parent); struct usb_device *dev = interface_to_usbdev(intf); product_name = dev->product; --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -840,6 +840,11 @@ static inline bool hid_is_using_ll_drive return hdev->ll_driver == driver; }

+static inline bool hid_is_usb(struct hid_device *hdev) +{ + return hid_is_using_ll_driver(hdev, &usb_hid_driver); +} + #define PM_HINT_FULLON 1<<5 #define PM_HINT_NORMAL 1<<1

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit d080811f27936f712f619f847389f403ac873b8f upstream.

The chicony HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like sparc when building due to new changes to the chicony driver.

Reported-by: Stephen Rothwell sfr@canb.auug.org.au Cc: stable@vger.kernel.org Cc: Jiri Kosina jikos@kernel.org Cc: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -207,7 +207,7 @@ config HID_CHERRY

config HID_CHICONY tristate "Chicony devices" - depends on HID + depends on USB_HID default !EXPERT help Support for Chicony Tactical pad and special keys on Chicony keyboards.

From: Benjamin Tissoires benjamin.tissoires@redhat.com

commit 918aa1ef104d286d16b9e7ef139a463ac7a296f0 upstream.

When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null.

Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Link: https://lore.kernel.org/r/20211202095334.14399-3-benjamin.tissoires@redhat.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-bigbenff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hid/hid-bigbenff.c +++ b/drivers/hid/hid-bigbenff.c @@ -191,7 +191,7 @@ static void bigben_worker(struct work_st struct bigben_device, worker); struct hid_field *report_field = bigben->report->field[0];

- if (bigben->removed) + if (bigben->removed || !report_field) return;

if (bigben->work_led) {

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 93020953d0fa7035fd036ad87a47ae2b7aa4ae33 upstream.

Many HID drivers assume that the HID device assigned to them is a USB device as that was the only way HID devices used to be able to be created in Linux. However, with the additional ways that HID devices can be created for many different bus types, that is no longer true, so properly check that we have a USB device associated with the HID device before allowing a driver that makes this assumption to claim it.

Cc: Jiri Kosina jikos@kernel.org Cc: Benjamin Tissoires benjamin.tissoires@redhat.com Cc: Michael Zaidman michael.zaidman@gmail.com Cc: Stefan Achatz erazor_de@users.sourceforge.net Cc: Maxime Coquelin mcoquelin.stm32@gmail.com Cc: Alexandre Torgue alexandre.torgue@foss.st.com Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Tested-by: Benjamin Tissoires benjamin.tissoires@redhat.com [bentiss: amended for thrustmater.c hunk to apply] Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-chicony.c | 3 +++ drivers/hid/hid-corsair.c | 7 ++++++- drivers/hid/hid-elan.c | 2 +- drivers/hid/hid-elo.c | 3 +++ drivers/hid/hid-ft260.c | 3 +++ drivers/hid/hid-holtek-kbd.c | 9 +++++++-- drivers/hid/hid-holtek-mouse.c | 9 +++++++++ drivers/hid/hid-lg.c | 10 ++++++++-- drivers/hid/hid-prodikeys.c | 10 ++++++++-- drivers/hid/hid-roccat-arvo.c | 3 +++ drivers/hid/hid-roccat-isku.c | 3 +++ drivers/hid/hid-roccat-kone.c | 3 +++ drivers/hid/hid-roccat-koneplus.c | 3 +++ drivers/hid/hid-roccat-konepure.c | 3 +++ drivers/hid/hid-roccat-kovaplus.c | 3 +++ drivers/hid/hid-roccat-lua.c | 3 +++ drivers/hid/hid-roccat-pyra.c | 3 +++ drivers/hid/hid-roccat-ryos.c | 3 +++ drivers/hid/hid-roccat-savu.c | 3 +++ drivers/hid/hid-samsung.c | 3 +++ drivers/hid/hid-sony.c | 6 +++++- drivers/hid/hid-thrustmaster.c | 3 +++ drivers/hid/hid-uclogic-core.c | 3 +++ 23 files changed, 92 insertions(+), 9 deletions(-)

--- a/drivers/hid/hid-chicony.c +++ b/drivers/hid/hid-chicony.c @@ -114,6 +114,9 @@ static int ch_probe(struct hid_device *h { int ret;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + hdev->quirks |= HID_QUIRK_INPUT_PER_APP; ret = hid_parse(hdev); if (ret) { --- a/drivers/hid/hid-corsair.c +++ b/drivers/hid/hid-corsair.c @@ -553,7 +553,12 @@ static int corsair_probe(struct hid_devi int ret; unsigned long quirks = id->driver_data; struct corsair_drvdata *drvdata; - struct usb_interface *usbif = to_usb_interface(dev->dev.parent); + struct usb_interface *usbif; + + if (!hid_is_usb(dev)) + return -EINVAL; + + usbif = to_usb_interface(dev->dev.parent);

drvdata = devm_kzalloc(&dev->dev, sizeof(struct corsair_drvdata), GFP_KERNEL); --- a/drivers/hid/hid-elan.c +++ b/drivers/hid/hid-elan.c @@ -50,7 +50,7 @@ struct elan_drvdata {

static int is_not_elan_touchpad(struct hid_device *hdev) { - if (hdev->bus == BUS_USB) { + if (hid_is_usb(hdev)) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent);

return (intf->altsetting->desc.bInterfaceNumber != --- a/drivers/hid/hid-elo.c +++ b/drivers/hid/hid-elo.c @@ -230,6 +230,9 @@ static int elo_probe(struct hid_device * int ret; struct usb_device *udev;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; --- a/drivers/hid/hid-ft260.c +++ b/drivers/hid/hid-ft260.c @@ -915,6 +915,9 @@ static int ft260_probe(struct hid_device struct ft260_get_chip_version_report version; int ret;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; --- a/drivers/hid/hid-holtek-kbd.c +++ b/drivers/hid/hid-holtek-kbd.c @@ -140,12 +140,17 @@ static int holtek_kbd_input_event(struct static int holtek_kbd_probe(struct hid_device *hdev, const struct hid_device_id *id) { - struct usb_interface *intf = to_usb_interface(hdev->dev.parent); - int ret = hid_parse(hdev); + struct usb_interface *intf; + int ret;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + + ret = hid_parse(hdev); if (!ret) ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);

+ intf = to_usb_interface(hdev->dev.parent); if (!ret && intf->cur_altsetting->desc.bInterfaceNumber == 1) { struct hid_input *hidinput; list_for_each_entry(hidinput, &hdev->inputs, list) { --- a/drivers/hid/hid-holtek-mouse.c +++ b/drivers/hid/hid-holtek-mouse.c @@ -62,6 +62,14 @@ static __u8 *holtek_mouse_report_fixup(s return rdesc; }

+static int holtek_mouse_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + if (!hid_is_usb(hdev)) + return -EINVAL; + return 0; +} + static const struct hid_device_id holtek_mouse_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, @@ -83,6 +91,7 @@ static struct hid_driver holtek_mouse_dr .name = "holtek_mouse", .id_table = holtek_mouse_devices, .report_fixup = holtek_mouse_report_fixup, + .probe = holtek_mouse_probe, };

module_hid_driver(holtek_mouse_driver); --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -749,12 +749,18 @@ static int lg_raw_event(struct hid_devic

static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) { - struct usb_interface *iface = to_usb_interface(hdev->dev.parent); - __u8 iface_num = iface->cur_altsetting->desc.bInterfaceNumber; + struct usb_interface *iface; + __u8 iface_num; unsigned int connect_mask = HID_CONNECT_DEFAULT; struct lg_drv_data *drv_data; int ret;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + + iface = to_usb_interface(hdev->dev.parent); + iface_num = iface->cur_altsetting->desc.bInterfaceNumber; + /* G29 only work with the 1st interface */ if ((hdev->product == USB_DEVICE_ID_LOGITECH_G29_WHEEL) && (iface_num != 0)) { --- a/drivers/hid/hid-prodikeys.c +++ b/drivers/hid/hid-prodikeys.c @@ -798,12 +798,18 @@ static int pk_raw_event(struct hid_devic static int pk_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; - struct usb_interface *intf = to_usb_interface(hdev->dev.parent); - unsigned short ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + struct usb_interface *intf; + unsigned short ifnum; unsigned long quirks = id->driver_data; struct pk_device *pk; struct pcmidi_snd *pm = NULL;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + + intf = to_usb_interface(hdev->dev.parent); + ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + pk = kzalloc(sizeof(*pk), GFP_KERNEL); if (pk == NULL) { hid_err(hdev, "can't alloc descriptor\n"); --- a/drivers/hid/hid-roccat-arvo.c +++ b/drivers/hid/hid-roccat-arvo.c @@ -344,6 +344,9 @@ static int arvo_probe(struct hid_device { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-isku.c +++ b/drivers/hid/hid-roccat-isku.c @@ -324,6 +324,9 @@ static int isku_probe(struct hid_device { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -749,6 +749,9 @@ static int kone_probe(struct hid_device { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-koneplus.c +++ b/drivers/hid/hid-roccat-koneplus.c @@ -431,6 +431,9 @@ static int koneplus_probe(struct hid_dev { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-konepure.c +++ b/drivers/hid/hid-roccat-konepure.c @@ -133,6 +133,9 @@ static int konepure_probe(struct hid_dev { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-kovaplus.c +++ b/drivers/hid/hid-roccat-kovaplus.c @@ -501,6 +501,9 @@ static int kovaplus_probe(struct hid_dev { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-lua.c +++ b/drivers/hid/hid-roccat-lua.c @@ -160,6 +160,9 @@ static int lua_probe(struct hid_device * { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-pyra.c +++ b/drivers/hid/hid-roccat-pyra.c @@ -449,6 +449,9 @@ static int pyra_probe(struct hid_device { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-ryos.c +++ b/drivers/hid/hid-roccat-ryos.c @@ -141,6 +141,9 @@ static int ryos_probe(struct hid_device { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-roccat-savu.c +++ b/drivers/hid/hid-roccat-savu.c @@ -113,6 +113,9 @@ static int savu_probe(struct hid_device { int retval;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + retval = hid_parse(hdev); if (retval) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-samsung.c +++ b/drivers/hid/hid-samsung.c @@ -152,6 +152,9 @@ static int samsung_probe(struct hid_devi int ret; unsigned int cmask = HID_CONNECT_DEFAULT;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + ret = hid_parse(hdev); if (ret) { hid_err(hdev, "parse failed\n"); --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -3000,7 +3000,6 @@ static int sony_probe(struct hid_device sc->quirks = quirks; hid_set_drvdata(hdev, sc); sc->hdev = hdev; - usbdev = to_usb_device(sc->hdev->dev.parent->parent);

ret = hid_parse(hdev); if (ret) { @@ -3043,6 +3042,11 @@ static int sony_probe(struct hid_device }

if (sc->quirks & (GHL_GUITAR_PS3WIIU | GHL_GUITAR_PS4)) { + if (!hid_is_usb(hdev)) + return -EINVAL; + + usbdev = to_usb_device(sc->hdev->dev.parent->parent); + sc->ghl_urb = usb_alloc_urb(0, GFP_ATOMIC); if (!sc->ghl_urb) return -ENOMEM; --- a/drivers/hid/hid-thrustmaster.c +++ b/drivers/hid/hid-thrustmaster.c @@ -274,6 +274,9 @@ static int thrustmaster_probe(struct hid int ret = 0; struct tm_wheel *tm_wheel = 0;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + ret = hid_parse(hdev); if (ret) { hid_err(hdev, "parse failed with error %d\n", ret); --- a/drivers/hid/hid-uclogic-core.c +++ b/drivers/hid/hid-uclogic-core.c @@ -164,6 +164,9 @@ static int uclogic_probe(struct hid_devi struct uclogic_drvdata *drvdata = NULL; bool params_initialized = false;

+ if (!hid_is_usb(hdev)) + return -EINVAL; + /* * libinput requires the pad interface to be on a different node * than the pen, so use QUIRK_MULTI_INPUT for all tablets.

From: Jon Hunter jonathanh@nvidia.com

commit 5f719948b5d43eb39356e94e8d0b462568915381 upstream.

Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_id is missing for the MMC SPI driver and the following warning is now seen.

WARNING KERN SPI driver mmc_spi has no spi_device_id for mmc-spi-slot

Fix this by adding the necessary spi_device_id.

Signed-off-by: Jon Hunter jonathanh@nvidia.com Link: https://lore.kernel.org/r/20211115113813.238044-1-jonathanh@nvidia.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/mmc_spi.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1514,6 +1514,12 @@ static int mmc_spi_remove(struct spi_dev return 0; }

+static const struct spi_device_id mmc_spi_dev_ids[] = { + { "mmc-spi-slot"}, + { }, +}; +MODULE_DEVICE_TABLE(spi, mmc_spi_dev_ids); + static const struct of_device_id mmc_spi_of_match_table[] = { { .compatible = "mmc-spi-slot", }, {}, @@ -1525,6 +1531,7 @@ static struct spi_driver mmc_spi_driver .name = "mmc_spi", .of_match_table = mmc_spi_of_match_table, }, + .id_table = mmc_spi_dev_ids, .probe = mmc_spi_probe, .remove = mmc_spi_remove, };

From: Hans de Goede hdegoede@redhat.com

commit 14902f8961dca9c66bf190f7b1583767c97a4197 upstream.

Battery status is reported for the Asus UX550VE touchscreen even though it does not have a battery. Prevent it from always reporting the battery as low.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823 Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-input.c | 2 ++ 2 files changed, 3 insertions(+)

--- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -394,6 +394,7 @@ #define USB_DEVICE_ID_HP_X2 0x074d #define USB_DEVICE_ID_HP_X2_10_COVER 0x0755 #define I2C_DEVICE_ID_HP_SPECTRE_X360_15 0x2817 +#define USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN 0x2544 #define USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN 0x2706 #define I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN 0x261A

--- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -325,6 +325,8 @@ static const struct hid_device_id hid_ba HID_BATTERY_QUIRK_IGNORE }, { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN), HID_BATTERY_QUIRK_IGNORE }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN), + HID_BATTERY_QUIRK_IGNORE }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_15), HID_BATTERY_QUIRK_IGNORE }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN),

From: Stefano Brivio sbrivio@redhat.com

commit b7e945e228d7df1b1473ef6fd2cdec67433065fb upstream.

The sixth byte of packet data has to be looked up in the sixth group, not in the seventh one, even if we load the bucket data into ymm6 (and not ymm5, for convenience of tracking stalls).

Without this fix, matching on a MAC address as first field of a set, if 8-bit groups are selected (due to a small set size) would fail, that is, the given MAC address would never match.

Reported-by: Nikita Yushchenko nikita.yushchenko@virtuozzo.com Cc: stable@vger.kernel.org # 5.6.x Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Signed-off-by: Stefano Brivio sbrivio@redhat.com Tested-By: Nikita Yushchenko nikita.yushchenko@virtuozzo.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/netfilter/nft_set_pipapo_avx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/nft_set_pipapo_avx2.c +++ b/net/netfilter/nft_set_pipapo_avx2.c @@ -886,7 +886,7 @@ static int nft_pipapo_avx2_lookup_8b_6(u NFT_PIPAPO_AVX2_BUCKET_LOAD8(4, lt, 4, pkt[4], bsize);

NFT_PIPAPO_AVX2_AND(5, 0, 1); - NFT_PIPAPO_AVX2_BUCKET_LOAD8(6, lt, 6, pkt[5], bsize); + NFT_PIPAPO_AVX2_BUCKET_LOAD8(6, lt, 5, pkt[5], bsize); NFT_PIPAPO_AVX2_AND(7, 2, 3);

/* Stall */

From: Mike Marciniszyn mike.marciniszyn@cornelisnetworks.com

commit f6a3cfec3c01f9983e961c3327cef0db129a3c43 upstream.

The following trace can be observed with an init failure such as firmware load failures:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Workqueue: events work_for_cpu_fn RIP: 0010:0x0 Code: Bad RIP value. RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00 RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100 R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180 R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000 FS: 0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0 Call Trace: receive_context_interrupt+0x1f/0x40 [hfi1] __free_irq+0x201/0x300 free_irq+0x2e/0x60 pci_free_irq+0x18/0x30 msix_free_irq.part.2+0x46/0x80 [hfi1] msix_clean_up_interrupts+0x2b/0x70 [hfi1] hfi1_init_dd+0x640/0x1a90 [hfi1] do_init_one.isra.19+0x34d/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40

The free_irq() results in a callback to the registered interrupt handler, and rcd->do_interrupt is NULL because the receive context data structures are not fully initialized.

Fix by ensuring that the do_interrupt is always assigned and adding a guards in the slow path handler to detect and handle a partially initialized receive context and noop the receive.

Link: https://lore.kernel.org/r/20211129192003.101968.33612.stgit@awfm-01.cornelis... Cc: stable@vger.kernel.org Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array") Signed-off-by: Mike Marciniszyn mike.marciniszyn@cornelisnetworks.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@cornelisnetworks.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/hw/hfi1/chip.c | 2 ++ drivers/infiniband/hw/hfi1/driver.c | 2 ++ drivers/infiniband/hw/hfi1/init.c | 5 ++--- 3 files changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -8414,6 +8414,8 @@ static void receive_interrupt_common(str */ static void __hfi1_rcd_eoi_intr(struct hfi1_ctxtdata *rcd) { + if (!rcd->rcvhdrq) + return; clear_recv_intr(rcd); if (check_packet_present(rcd)) force_recv_intr(rcd); --- a/drivers/infiniband/hw/hfi1/driver.c +++ b/drivers/infiniband/hw/hfi1/driver.c @@ -1011,6 +1011,8 @@ int handle_receive_interrupt(struct hfi1 struct hfi1_packet packet; int skip_pkt = 0;

+ if (!rcd->rcvhdrq) + return RCV_PKT_OK; /* Control context will always use the slow path interrupt handler */ needset = (rcd->ctxt == HFI1_CTRL_CTXT) ? 0 : 1;

--- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -112,7 +112,6 @@ static int hfi1_create_kctxt(struct hfi1 rcd->fast_handler = get_dma_rtail_setting(rcd) ? handle_receive_interrupt_dma_rtail : handle_receive_interrupt_nodma_rtail; - rcd->slow_handler = handle_receive_interrupt;

hfi1_set_seq_cnt(rcd, 1);

@@ -333,6 +332,8 @@ int hfi1_create_ctxtdata(struct hfi1_ppo rcd->numa_id = numa; rcd->rcv_array_groups = dd->rcv_entries.ngroups; rcd->rhf_rcv_function_map = normal_rhf_rcv_functions; + rcd->slow_handler = handle_receive_interrupt; + rcd->do_interrupt = rcd->slow_handler; rcd->msix_intr = CCE_NUM_MSIX_VECTORS;

mutex_init(&rcd->exp_mutex); @@ -897,8 +898,6 @@ int hfi1_init(struct hfi1_devdata *dd, i if (!rcd) continue;

- rcd->do_interrupt = &handle_receive_interrupt; - lastfail = hfi1_create_rcvhdrq(dd, rcd); if (!lastfail) lastfail = hfi1_setup_eagerbufs(rcd);

From: Jimmy Assarsson extja@kvaser.com

commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream.

The CAN clock frequency is used when calculating the CAN bittiming parameters. When wrong clock frequency is used, the device may end up with wrong bittiming parameters, depending on user requested bittiming parameters.

To avoid this, get the CAN clock frequency from the device. Various existing Kvaser Leaf products use different CAN clocks.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 101 ++++++++++++++++------- 1 file changed, 73 insertions(+), 28 deletions(-)

--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -28,10 +28,6 @@

#include "kvaser_usb.h"

-/* Forward declaration */ -static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg; - -#define CAN_USB_CLOCK 8000000 #define MAX_USBCAN_NET_DEVICES 2

/* Command header size */ @@ -80,6 +76,12 @@ static const struct kvaser_usb_dev_cfg k

#define CMD_LEAF_LOG_MESSAGE 106

+/* Leaf frequency options */ +#define KVASER_USB_LEAF_SWOPTION_FREQ_MASK 0x60 +#define KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK 0 +#define KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK BIT(5) +#define KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK BIT(6) + /* error factors */ #define M16C_EF_ACKE BIT(0) #define M16C_EF_CRCE BIT(1) @@ -340,6 +342,50 @@ struct kvaser_usb_err_summary { }; };

+static const struct can_bittiming_const kvaser_usb_leaf_bittiming_const = { + .name = "kvaser_usb", + .tseg1_min = KVASER_USB_TSEG1_MIN, + .tseg1_max = KVASER_USB_TSEG1_MAX, + .tseg2_min = KVASER_USB_TSEG2_MIN, + .tseg2_max = KVASER_USB_TSEG2_MAX, + .sjw_max = KVASER_USB_SJW_MAX, + .brp_min = KVASER_USB_BRP_MIN, + .brp_max = KVASER_USB_BRP_MAX, + .brp_inc = KVASER_USB_BRP_INC, +}; + +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_8mhz = { + .clock = { + .freq = 8000000, + }, + .timestamp_freq = 1, + .bittiming_const = &kvaser_usb_leaf_bittiming_const, +}; + +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_16mhz = { + .clock = { + .freq = 16000000, + }, + .timestamp_freq = 1, + .bittiming_const = &kvaser_usb_leaf_bittiming_const, +}; + +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_24mhz = { + .clock = { + .freq = 24000000, + }, + .timestamp_freq = 1, + .bittiming_const = &kvaser_usb_leaf_bittiming_const, +}; + +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_32mhz = { + .clock = { + .freq = 32000000, + }, + .timestamp_freq = 1, + .bittiming_const = &kvaser_usb_leaf_bittiming_const, +}; + static void * kvaser_usb_leaf_frame_to_cmd(const struct kvaser_usb_net_priv *priv, const struct sk_buff *skb, int *frame_len, @@ -471,6 +517,27 @@ static int kvaser_usb_leaf_send_simple_c return rc; }

+static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev, + const struct leaf_cmd_softinfo *softinfo) +{ + u32 sw_options = le32_to_cpu(softinfo->sw_options); + + dev->fw_version = le32_to_cpu(softinfo->fw_version); + dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx); + + switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) { + case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK: + dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz; + break; + case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK: + dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz; + break; + case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK: + dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz; + break; + } +} + static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev) { struct kvaser_cmd cmd; @@ -486,14 +553,13 @@ static int kvaser_usb_leaf_get_software_

switch (dev->card_data.leaf.family) { case KVASER_LEAF: - dev->fw_version = le32_to_cpu(cmd.u.leaf.softinfo.fw_version); - dev->max_tx_urbs = - le16_to_cpu(cmd.u.leaf.softinfo.max_outstanding_tx); + kvaser_usb_leaf_get_software_info_leaf(dev, &cmd.u.leaf.softinfo); break; case KVASER_USBCAN: dev->fw_version = le32_to_cpu(cmd.u.usbcan.softinfo.fw_version); dev->max_tx_urbs = le16_to_cpu(cmd.u.usbcan.softinfo.max_outstanding_tx); + dev->cfg = &kvaser_usb_leaf_dev_cfg_8mhz; break; }

@@ -1225,24 +1291,11 @@ static int kvaser_usb_leaf_init_card(str { struct kvaser_usb_dev_card_data *card_data = &dev->card_data;

- dev->cfg = &kvaser_usb_leaf_dev_cfg; card_data->ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;

return 0; }

-static const struct can_bittiming_const kvaser_usb_leaf_bittiming_const = { - .name = "kvaser_usb", - .tseg1_min = KVASER_USB_TSEG1_MIN, - .tseg1_max = KVASER_USB_TSEG1_MAX, - .tseg2_min = KVASER_USB_TSEG2_MIN, - .tseg2_max = KVASER_USB_TSEG2_MAX, - .sjw_max = KVASER_USB_SJW_MAX, - .brp_min = KVASER_USB_BRP_MIN, - .brp_max = KVASER_USB_BRP_MAX, - .brp_inc = KVASER_USB_BRP_INC, -}; - static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev) { struct kvaser_usb_net_priv *priv = netdev_priv(netdev); @@ -1348,11 +1401,3 @@ const struct kvaser_usb_dev_ops kvaser_u .dev_read_bulk_callback = kvaser_usb_leaf_read_bulk_callback, .dev_frame_to_cmd = kvaser_usb_leaf_frame_to_cmd, }; - -static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg = { - .clock = { - .freq = CAN_USB_CLOCK, - }, - .timestamp_freq = 1, - .bittiming_const = &kvaser_usb_leaf_bittiming_const, -};

From: Dan Carpenter dan.carpenter@oracle.com

commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream.

If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead.

Also we should check if at least one channel was set up.

Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Oliver Hartkopp socketcan@hartkopp.net Tested-by: Oliver Hartkopp socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/sja1000/ems_pcmcia.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/net/can/sja1000/ems_pcmcia.c +++ b/drivers/net/can/sja1000/ems_pcmcia.c @@ -234,7 +234,12 @@ static int ems_pcmcia_add_card(struct pc free_sja1000dev(dev); }

- err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED, + if (!card->channels) { + err = -ENODEV; + goto failure_cleanup; + } + + err = request_irq(pdev->irq, &ems_pcmcia_interrupt, IRQF_SHARED, DRV_NAME, card); if (!err) return 0;

From: Vincent Mailhol mailhol.vincent@wanadoo.fr

commit 31cb32a590d62b18f69a9a6d433f4e69c74fdd56 upstream.

In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak.

This patch adds a goto label to destroy the skb if an error occurs.

Issue was found with GCC -fanalyzer, please follow the link below for details.

Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20211107050755.70655-1-mailhol.vincent@wanadoo.f... Cc: stable@vger.kernel.org Cc: Matt Kline matt@bitbashing.io Signed-off-by: Vincent Mailhol mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/m_can/m_can.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -517,7 +517,7 @@ static int m_can_read_fifo(struct net_de err = m_can_fifo_read(cdev, fgi, M_CAN_FIFO_DATA, cf->data, DIV_ROUND_UP(cf->len, 4)); if (err) - goto out_fail; + goto out_free_skb; }

/* acknowledge rx fifo 0 */ @@ -532,6 +532,8 @@ static int m_can_read_fifo(struct net_de

return 0;

+out_free_skb: + kfree_skb(skb); out_fail: netdev_err(dev, "FIFO read returned %d\n", err); return err;

From: Matthias Schiffer matthias.schiffer@ew.tq-group.com

commit d737de2d7cc3efdacbf17d4e22efc75697bd76d9 upstream.

The same fix that was previously done in m_can_platform in commit 99d173fbe894 ("can: m_can: fix iomap_read_fifo() and iomap_write_fifo()") is required in m_can_pci as well to make iomap_read_fifo() and iomap_write_fifo() work for val_count > 1.

Fixes: 812270e5445b ("can: m_can: Batch FIFO writes during CAN transmit") Fixes: 1aa6772f64b4 ("can: m_can: Batch FIFO reads during CAN receive") Link: https://lore.kernel.org/all/20211118144011.10921-1-matthias.schiffer@ew.tq-g... Cc: stable@vger.kernel.org Cc: Matt Kline matt@bitbashing.io Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Tested-by: Jarkko Nikula jarkko.nikula@linux.intel.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/m_can/m_can_pci.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/net/can/m_can/m_can_pci.c +++ b/drivers/net/can/m_can/m_can_pci.c @@ -42,8 +42,13 @@ static u32 iomap_read_reg(struct m_can_c static int iomap_read_fifo(struct m_can_classdev *cdev, int offset, void *val, size_t val_count) { struct m_can_pci_priv *priv = cdev_to_priv(cdev); + void __iomem *src = priv->base + offset;

- ioread32_rep(priv->base + offset, val, val_count); + while (val_count--) { + *(unsigned int *)val = ioread32(src); + val += 4; + src += 4; + }

return 0; } @@ -61,8 +66,13 @@ static int iomap_write_fifo(struct m_can const void *val, size_t val_count) { struct m_can_pci_priv *priv = cdev_to_priv(cdev); + void __iomem *dst = priv->base + offset;

- iowrite32_rep(priv->base + offset, val, val_count); + while (val_count--) { + iowrite32(*(unsigned int *)val, dst); + val += 4; + dst += 4; + }

return 0; }

From: Russell King (Oracle) rmk+kernel@armlinux.org.uk

commit 2b29cb9e3f7f038c7f50ad2583b47caf5cb1eaf2 upstream.

This commit fixes a misunderstanding in commit 4a3e0aeddf09 ("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's").

For Marvell DSA switches with the PHY_DETECT bit (for non-6250 family devices), controls whether the PPU polls the PHY to retrieve the link, speed, duplex and pause status to update the port configuration. This applies for both internal and external PHYs.

For some switches such as 88E6352 and 88E6390X, PHY_DETECT has an additional function of enabling auto-media mode between the internal PHY and SERDES blocks depending on which first gains link.

The original intention of commit 5d5b231da7ac (net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_down) was to allow this bit to be used to detect when this propagation is enabled, and allow software to update the port configuration. This has found to be necessary for some switches which do not automatically propagate status from the SERDES to the port, which includes the 88E6390. However, commit 4a3e0aeddf09 ("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's") breaks this assumption.

Maarten Zanders has confirmed that the issue he was addressing was for an 88E6250 switch, which does not have a PHY_DETECT bit in bit 12, but instead a link status bit. Therefore, mv88e6xxx_port_ppu_updates() does not report correctly.

This patch resolves the above issues by reverting Maarten's change and instead making mv88e6xxx_port_ppu_updates() indicate whether the port is internal for the 88E6250 family of switches.

Yes, you're right, I'm targeting the 6250 family. And yes, your suggestion would solve my case and is a better implementation for the other devices (as far as I can see).

Fixes: 4a3e0aeddf09 ("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's") Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Tested-by: Maarten Zanders maarten.zanders@mind.be Link: https://lore.kernel.org/r/E1muXm7-00EwJB-7n@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/mv88e6xxx/chip.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -471,6 +471,12 @@ static int mv88e6xxx_port_ppu_updates(st u16 reg; int err;

+ /* The 88e6250 family does not have the PHY detect bit. Instead, + * report whether the port is internal. + */ + if (chip->info->family == MV88E6XXX_FAMILY_6250) + return port < chip->info->num_internal_phys; + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg); if (err) { dev_err(chip->dev, @@ -753,11 +759,10 @@ static void mv88e6xxx_mac_link_down(stru ops = chip->info->ops;

mv88e6xxx_reg_lock(chip); - /* Internal PHYs propagate their configuration directly to the MAC. - * External PHYs depend on whether the PPU is enabled for this port. + /* Force the link down if we know the port may not be automatically + * updated by the switch or if we are using fixed-link mode. */ - if (((!mv88e6xxx_phy_is_internal(ds, port) && - !mv88e6xxx_port_ppu_updates(chip, port)) || + if ((!mv88e6xxx_port_ppu_updates(chip, port) || mode == MLO_AN_FIXED) && ops->port_sync_link) err = ops->port_sync_link(chip, port, mode, false); mv88e6xxx_reg_unlock(chip); @@ -780,11 +785,11 @@ static void mv88e6xxx_mac_link_up(struct ops = chip->info->ops;

mv88e6xxx_reg_lock(chip); - /* Internal PHYs propagate their configuration directly to the MAC. - * External PHYs depend on whether the PPU is enabled for this port. + /* Configure and force the link up if we know that the port may not + * automatically updated by the switch or if we are using fixed-link + * mode. */ - if ((!mv88e6xxx_phy_is_internal(ds, port) && - !mv88e6xxx_port_ppu_updates(chip, port)) || + if (!mv88e6xxx_port_ppu_updates(chip, port) || mode == MLO_AN_FIXED) { /* FIXME: for an automedia port, should we force the link * down here - what if the link comes up due to "other" media

From: Tom Lendacky thomas.lendacky@amd.com

commit 1ff2fc02862d52e18fd3daabcfe840ec27e920a8 upstream.

Reserving memory using efi_mem_reserve() calls into the x86 efi_arch_mem_reserve() function. This function will insert a new EFI memory descriptor into the EFI memory map representing the area of memory to be reserved and marking it as EFI runtime memory. As part of adding this new entry, a new EFI memory map is allocated and mapped. The mapping is where a problem can occur. This new memory map is mapped using early_memremap() and generally mapped encrypted, unless the new memory for the mapping happens to come from an area of memory that is marked as EFI_BOOT_SERVICES_DATA memory. In this case, the new memory will be mapped unencrypted. However, during replacement of the old memory map, efi_mem_type() is disabled, so the new memory map will now be long-term mapped encrypted (in efi.memmap), resulting in the map containing invalid data and causing the kernel boot to crash.

Since it is known that the area will be mapped encrypted going forward, explicitly map the new memory map as encrypted using early_memremap_prot().

Cc: stable@vger.kernel.org # 4.14.x Fixes: 8f716c9b5feb ("x86/mm: Add support to access boot related data in the clear") Link: https://lore.kernel.org/all/ebf1eb2940405438a09d51d121ec0d02c8755558.1634752... Signed-off-by: Tom Lendacky thomas.lendacky@amd.com [ardb: incorporate Kconfig fix by Arnd] Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/Kconfig | 1 + arch/x86/platform/efi/quirks.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)

--- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1919,6 +1919,7 @@ config EFI depends on ACPI select UCS2_STRING select EFI_RUNTIME_WRAPPERS + select ARCH_USE_MEMREMAP_PROT help This enables the kernel to use EFI runtime services that are available (such as the EFI variable services). --- a/arch/x86/platform/efi/quirks.c +++ b/arch/x86/platform/efi/quirks.c @@ -277,7 +277,8 @@ void __init efi_arch_mem_reserve(phys_ad return; }

- new = early_memremap(data.phys_map, data.size); + new = early_memremap_prot(data.phys_map, data.size, + pgprot_val(pgprot_encrypted(FIXMAP_PAGE_NORMAL))); if (!new) { pr_err("Failed to map new boot services memmap\n"); return;

From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com

commit 4cd8371a234d051f9c9557fcbb1f8c523b1c0d10 upstream.

The done() netlink callback nfc_genl_dump_ses_done() should check if received argument is non-NULL, because its allocation could fail earlier in dumpit() (nfc_genl_dump_ses()).

Fixes: ac22ac466a65 ("NFC: Add a GET_SE netlink API") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonic... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/nfc/netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -1392,8 +1392,10 @@ static int nfc_genl_dump_ses_done(struct { struct class_dev_iter *iter = (struct class_dev_iter *) cb->args[0];

- nfc_device_iter_exit(iter); - kfree(iter); + if (iter) { + nfc_device_iter_exit(iter); + kfree(iter); + }

return 0; }

From: Nicolas Dichtel nicolas.dichtel@6wind.com

commit d43b75fbc23f0ac1ef9c14a5a166d3ccb761a451 upstream.

After the below patch, the conntrack attached to skb is set to "notrack" in the context of vrf device, for locally generated packets. But this is true only when the default qdisc is set to the vrf device. When changing the qdisc, notrack is not set anymore. In fact, there is a shortcut in the vrf driver, when the default qdisc is set, see commit dcdd43c41e60 ("net: vrf: performance improvements for IPv4") for more details.

This patch ensures that the behavior is always the same, whatever the qdisc is.

To demonstrate the difference, a new test is added in conntrack_vrf.sh.

Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets") Signed-off-by: Nicolas Dichtel nicolas.dichtel@6wind.com Acked-by: Florian Westphal fw@strlen.de Reviewed-by: David Ahern dsahern@kernel.org Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/vrf.c | 8 ++--- tools/testing/selftests/netfilter/conntrack_vrf.sh | 30 ++++++++++++++++++--- 2 files changed, 30 insertions(+), 8 deletions(-)

--- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -770,8 +770,6 @@ static struct sk_buff *vrf_ip6_out_direc

skb->dev = vrf_dev;

- vrf_nf_set_untracked(skb); - err = nf_hook(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net, sk, skb, NULL, vrf_dev, vrf_ip6_out_direct_finish);

@@ -792,6 +790,8 @@ static struct sk_buff *vrf_ip6_out(struc if (rt6_need_strict(&ipv6_hdr(skb)->daddr)) return skb;

+ vrf_nf_set_untracked(skb); + if (qdisc_tx_is_default(vrf_dev) || IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) return vrf_ip6_out_direct(vrf_dev, sk, skb); @@ -1000,8 +1000,6 @@ static struct sk_buff *vrf_ip_out_direct

skb->dev = vrf_dev;

- vrf_nf_set_untracked(skb); - err = nf_hook(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, sk, skb, NULL, vrf_dev, vrf_ip_out_direct_finish);

@@ -1023,6 +1021,8 @@ static struct sk_buff *vrf_ip_out(struct ipv4_is_lbcast(ip_hdr(skb)->daddr)) return skb;

+ vrf_nf_set_untracked(skb); + if (qdisc_tx_is_default(vrf_dev) || IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) return vrf_ip_out_direct(vrf_dev, sk, skb); --- a/tools/testing/selftests/netfilter/conntrack_vrf.sh +++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh @@ -150,11 +150,27 @@ EOF # oifname is the vrf device. test_masquerade_vrf() { + local qdisc=$1 + + if [ "$qdisc" != "default" ]; then + tc -net $ns0 qdisc add dev tvrf root $qdisc + fi + ip netns exec $ns0 conntrack -F 2>/dev/null

ip netns exec $ns0 nft -f - <<EOF flush ruleset table ip nat { + chain rawout { + type filter hook output priority raw; + + oif tvrf ct state untracked counter + } + chain postrouting2 { + type filter hook postrouting priority mangle; + + oif tvrf ct state untracked counter + } chain postrouting { type nat hook postrouting priority 0; # NB: masquerade should always be combined with 'oif(name) bla', @@ -171,13 +187,18 @@ EOF fi

# must also check that nat table was evaluated on second (lower device) iteration. - ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' + ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' && + ip netns exec $ns0 nft list table ip nat |grep -q 'untracked counter packets [1-9]' if [ $? -eq 0 ]; then - echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device" + echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)" else - echo "FAIL: vrf masq rule has unexpected counter value" + echo "FAIL: vrf rules have unexpected counter value" ret=1 fi + + if [ "$qdisc" != "default" ]; then + tc -net $ns0 qdisc del dev tvrf root + fi }

# add masq rule that gets evaluated w. outif set to veth device. @@ -213,7 +234,8 @@ EOF }

test_ct_zone_in -test_masquerade_vrf +test_masquerade_vrf "default" +test_masquerade_vrf "pfifo" test_masquerade_veth

exit $ret

From: John Fastabend john.fastabend@gmail.com

commit 38207a5e81230d6ffbdd51e5fa5681be5116dcae upstream.

When a TCP socket is added to a sock map we look at the programs attached to the map to determine what proto op hooks need to be changed. Before the patch in the 'fixes' tag there were only two categories -- the empty set of programs or a TX policy. In any case the base set handled the receive case.

After the fix we have an optimized program for receive that closes a small, but possible, race on receive. This program is loaded only when the map the psock is being added to includes a RX policy. Otherwise, the race is not possible so we don't need to handle the race condition.

In order for the call to sk_psock_init() to correctly evaluate the above conditions all progs need to be set in the psock before the call. However, in the current code this is not the case. We end up evaluating the requirements on the old prog state. If your psock is attached to multiple maps -- for example a tx map and rx map -- then the second update would pull in the correct maps. But, the other pattern with a single rx enabled map the correct receive hooks are not used. The result is the race fixed by the patch in the fixes tag below may still be seen in this case.

To fix we simply set all psock->progs before doing the call into sock_map_init(). With this the init() call gets the full list of programs and chooses the correct proto ops on the first iteration instead of requiring the second update to pull them in. This fixes the race case when only a single map is used.

Fixes: c5d2177a72a16 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Signed-off-by: John Fastabend john.fastabend@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20211119181418.353932-2-john.fastabend@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/sock_map.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -282,6 +282,12 @@ static int sock_map_link(struct bpf_map

if (msg_parser) psock_set_prog(&psock->progs.msg_parser, msg_parser); + if (stream_parser) + psock_set_prog(&psock->progs.stream_parser, stream_parser); + if (stream_verdict) + psock_set_prog(&psock->progs.stream_verdict, stream_verdict); + if (skb_verdict) + psock_set_prog(&psock->progs.skb_verdict, skb_verdict);

ret = sock_map_init_proto(sk, psock); if (ret < 0) @@ -292,14 +298,10 @@ static int sock_map_link(struct bpf_map ret = sk_psock_init_strp(sk, psock); if (ret) goto out_unlock_drop; - psock_set_prog(&psock->progs.stream_verdict, stream_verdict); - psock_set_prog(&psock->progs.stream_parser, stream_parser); sk_psock_start_strp(sk, psock); } else if (!stream_parser && stream_verdict && !psock->saved_data_ready) { - psock_set_prog(&psock->progs.stream_verdict, stream_verdict); sk_psock_start_verdict(sk,psock); } else if (!stream_verdict && skb_verdict && !psock->saved_data_ready) { - psock_set_prog(&psock->progs.skb_verdict, skb_verdict); sk_psock_start_verdict(sk, psock); } write_unlock_bh(&sk->sk_callback_lock);

From: Maxim Mikityanskiy maximmi@nvidia.com

commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that appeared in some comparisons with an open range. Due to this error, arithmetically equivalent pieces of code could get different verdicts from the verifier, for example (pseudocode):

// 1. Passes the verifier: if (data + 8 > data_end) return early read *(u64 *)data, i.e. [data; data+7]

// 2. Rejected by the verifier (should still pass): if (data + 7 >= data_end) return early read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong direction, so the bug not only remains, but also such piece of code starts failing in the verifier:

// 3. Rejected by the verifier, but the check is stricter than in #1. if (data + 8 >= data_end) return early read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into off-by-two. The second commit cited below added the BPF selftests written to ensure than code chunks like #3 are rejected, however, they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the right direction and fixes the tests by changing the range into the one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns") Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests") Signed-off-by: Maxim Mikityanskiy maximmi@nvidia.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/bpf/verifier.c | 2 tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c | 32 +++++----- 2 files changed, 17 insertions(+), 17 deletions(-)

--- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -8228,7 +8228,7 @@ static void find_good_pkt_pointers(struc

new_range = dst_reg->off; if (range_right_open) - new_range--; + new_range++;

/* Examples for register markings: * --- a/tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c +++ b/tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c @@ -112,10 +112,10 @@ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1), BPF_JMP_IMM(BPF_JA, 0, 0, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -167,10 +167,10 @@ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1), BPF_JMP_IMM(BPF_JA, 0, 0, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -274,9 +274,9 @@ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -437,9 +437,9 @@ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -544,10 +544,10 @@ offsetof(struct xdp_md, data_meta)), BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1), BPF_JMP_IMM(BPF_JA, 0, 0, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -599,10 +599,10 @@ offsetof(struct xdp_md, data_meta)), BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1), BPF_JMP_IMM(BPF_JA, 0, 0, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -706,9 +706,9 @@ offsetof(struct xdp_md, data_meta)), BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), }, @@ -869,9 +869,9 @@ offsetof(struct xdp_md, data_meta)), BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)), BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), - BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6), BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1), - BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN(), },

From: Antoine Tenart atenart@kernel.org

commit dde91ccfa25fd58f64c397d91b81a4b393100ffa upstream.

There is a short period between a net device starts to be unregistered and when it is actually gone. In that time frame ethtool operations could still be performed, which might end up in unwanted or undefined behaviours[1].

Do not allow ethtool operations after a net device starts its unregistration. This patch targets the netlink part as the ioctl one isn't affected: the reference to the net device is taken and the operation is executed within an rtnl lock section and the net device won't be found after unregister.

[1] For example adding Tx queues after unregister ends up in NULL pointer exceptions and UaFs, such as:

BUG: KASAN: use-after-free in kobject_get+0x14/0x90 Read of size 1 at addr ffff88801961248c by task ethtool/755

CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014 Call Trace: dump_stack_lvl+0x57/0x72 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b kobject_get+0x14/0x90 kobject_add_internal+0x3d1/0x450 kobject_init_and_add+0xba/0xf0 netdev_queue_update_kobjects+0xcf/0x200 netif_set_real_num_tx_queues+0xb4/0x310 veth_set_channels+0x1c3/0x550 ethnl_set_channels+0x524/0x610

Fixes: 041b1c5d4a53 ("ethtool: helper functions for netlink interface") Suggested-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Antoine Tenart atenart@kernel.org Link: https://lore.kernel.org/r/20211203101318.435618-1-atenart@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ethtool/netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -40,7 +40,8 @@ int ethnl_ops_begin(struct net_device *d if (dev->dev.parent) pm_runtime_get_sync(dev->dev.parent);

- if (!netif_device_present(dev)) { + if (!netif_device_present(dev) || + dev->reg_state == NETREG_UNREGISTERING) { ret = -ENODEV; goto err; }

From: Jianglei Nie niejianglei2021@163.com

commit c56c96303e9289cc34716b1179597b6f470833de upstream.

In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak.

We can fix it by freeing the CPP area when the cache is allocated failed (#2).

792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area;

800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes

802 if (!area) 803 return -ENOMEM;

805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free

817 return 0; 818 }

Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Signed-off-by: Jianglei Nie niejianglei2021@163.com Acked-by: Simon Horman simon.horman@corigine.com Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c +++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c @@ -803,8 +803,10 @@ int nfp_cpp_area_cache_add(struct nfp_cp return -ENOMEM;

cache = kzalloc(sizeof(*cache), GFP_KERNEL); - if (!cache) + if (!cache) { + nfp_cpp_area_free(area); return -ENOMEM; + }

cache->id = 0; cache->addr = 0;

From: Jianguo Wu wujianguo@chinatelecom.cn

commit 158390e45612ef0fde160af0826f1740c36daf21 upstream.

The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS, this is checked in udp_send_skb():

if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); return -EINVAL; }

skb->len contains network and transport header len here, we should use only data len instead.

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Jianguo Wu wujianguo@chinatelecom.cn Reviewed-by: Willem de Bruijn willemb@google.com Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/udp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -917,7 +917,7 @@ static int udp_send_skb(struct sk_buff * kfree_skb(skb); return -EINVAL; } - if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) { + if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); return -EINVAL; }

From: Eric Dumazet edumazet@google.com

commit 802a7dc5cf1bef06f7b290ce76d478138408d6b1 upstream.

(struct nf_conn)->timeout can be read/written locklessly, add READ_ONCE()/WRITE_ONCE() to prevent load/store tearing.

BUG: KCSAN: data-race in __nf_conntrack_alloc / __nf_conntrack_find_get

write to 0xffff888132e78c08 of 4 bytes by task 6029 on cpu 0: __nf_conntrack_alloc+0x158/0x280 net/netfilter/nf_conntrack_core.c:1563 init_conntrack+0x1da/0xb30 net/netfilter/nf_conntrack_core.c:1635 resolve_normal_ct+0x502/0x610 net/netfilter/nf_conntrack_core.c:1746 nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901 ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414 nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline] nf_hook_slow+0x72/0x170 net/netfilter/core.c:619 nf_hook include/linux/netfilter.h:262 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324 inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402 tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline] tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680 __tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864 tcp_push_pending_frames include/net/tcp.h:1897 [inline] tcp_data_snd_check+0x62/0x2e0 net/ipv4/tcp_input.c:5452 tcp_rcv_established+0x880/0x10e0 net/ipv4/tcp_input.c:5947 tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0xf2/0x270 net/core/sock.c:2768 release_sock+0x40/0x110 net/core/sock.c:3300 sk_stream_wait_memory+0x435/0x700 net/core/stream.c:145 tcp_sendmsg_locked+0xb85/0x25a0 net/ipv4/tcp.c:1402 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1440 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:644 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] __sys_sendto+0x21e/0x2c0 net/socket.c:2036 __do_sys_sendto net/socket.c:2048 [inline] __se_sys_sendto net/socket.c:2044 [inline] __x64_sys_sendto+0x74/0x90 net/socket.c:2044 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888132e78c08 of 4 bytes by task 17446 on cpu 1: nf_ct_is_expired include/net/netfilter/nf_conntrack.h:286 [inline] ____nf_conntrack_find net/netfilter/nf_conntrack_core.c:776 [inline] __nf_conntrack_find_get+0x1c7/0xac0 net/netfilter/nf_conntrack_core.c:807 resolve_normal_ct+0x273/0x610 net/netfilter/nf_conntrack_core.c:1734 nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901 ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414 nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline] nf_hook_slow+0x72/0x170 net/netfilter/core.c:619 nf_hook include/linux/netfilter.h:262 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324 inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402 __tcp_send_ack+0x1fd/0x300 net/ipv4/tcp_output.c:3956 tcp_send_ack+0x23/0x30 net/ipv4/tcp_output.c:3962 __tcp_ack_snd_check+0x2d8/0x510 net/ipv4/tcp_input.c:5478 tcp_ack_snd_check net/ipv4/tcp_input.c:5523 [inline] tcp_rcv_established+0x8c2/0x10e0 net/ipv4/tcp_input.c:5948 tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0xf2/0x270 net/core/sock.c:2768 release_sock+0x40/0x110 net/core/sock.c:3300 tcp_sendpage+0x94/0xb0 net/ipv4/tcp.c:1114 inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833 rds_tcp_xmit+0x376/0x5f0 net/rds/tcp_send.c:118 rds_send_xmit+0xbed/0x1500 net/rds/send.c:367 rds_send_worker+0x43/0x200 net/rds/threads.c:200 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298 worker_thread+0x616/0xa70 kernel/workqueue.c:2445 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30

value changed: 0x00027cc2 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 17446 Comm: kworker/u4:5 Tainted: G W 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: krdsd rds_send_worker

Note: I chose an arbitrary commit for the Fixes: tag, because I do not think we need to backport this fix to very old kernels.

Fixes: e37542ba111f ("netfilter: conntrack: avoid possible false sharing") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/netfilter/nf_conntrack.h | 6 +++--- net/netfilter/nf_conntrack_core.c | 6 +++--- net/netfilter/nf_conntrack_netlink.c | 2 +- net/netfilter/nf_flow_table_core.c | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-)

--- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -276,14 +276,14 @@ static inline bool nf_is_loopback_packet /* jiffies until ct expires, 0 if already expired */ static inline unsigned long nf_ct_expires(const struct nf_conn *ct) { - s32 timeout = ct->timeout - nfct_time_stamp; + s32 timeout = READ_ONCE(ct->timeout) - nfct_time_stamp;

return timeout > 0 ? timeout : 0; }

static inline bool nf_ct_is_expired(const struct nf_conn *ct) { - return (__s32)(ct->timeout - nfct_time_stamp) <= 0; + return (__s32)(READ_ONCE(ct->timeout) - nfct_time_stamp) <= 0; }

/* use after obtaining a reference count */ @@ -302,7 +302,7 @@ static inline bool nf_ct_should_gc(const static inline void nf_ct_offload_timeout(struct nf_conn *ct) { if (nf_ct_expires(ct) < NF_CT_DAY / 2) - ct->timeout = nfct_time_stamp + NF_CT_DAY; + WRITE_ONCE(ct->timeout, nfct_time_stamp + NF_CT_DAY); }

struct kernel_param; --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -684,7 +684,7 @@ bool nf_ct_delete(struct nf_conn *ct, u3

tstamp = nf_conn_tstamp_find(ct); if (tstamp) { - s32 timeout = ct->timeout - nfct_time_stamp; + s32 timeout = READ_ONCE(ct->timeout) - nfct_time_stamp;

tstamp->stop = ktime_get_real_ns(); if (timeout < 0) @@ -1036,7 +1036,7 @@ static int nf_ct_resolve_clash_harder(st }

/* We want the clashing entry to go away real soon: 1 second timeout. */ - loser_ct->timeout = nfct_time_stamp + HZ; + WRITE_ONCE(loser_ct->timeout, nfct_time_stamp + HZ);

/* IPS_NAT_CLASH removes the entry automatically on the first * reply. Also prevents UDP tracker from moving the entry to @@ -1560,7 +1560,7 @@ __nf_conntrack_alloc(struct net *net, /* save hash for reusing when confirming */ *(unsigned long *)(&ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev) = hash; ct->status = 0; - ct->timeout = 0; + WRITE_ONCE(ct->timeout, 0); write_pnet(&ct->ct_net, net); memset(&ct->__nfct_init_offset, 0, offsetof(struct nf_conn, proto) - --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1998,7 +1998,7 @@ static int ctnetlink_change_timeout(stru

if (timeout > INT_MAX) timeout = INT_MAX; - ct->timeout = nfct_time_stamp + (u32)timeout; + WRITE_ONCE(ct->timeout, nfct_time_stamp + (u32)timeout);

if (test_bit(IPS_DYING_BIT, &ct->status)) return -ETIME; --- a/net/netfilter/nf_flow_table_core.c +++ b/net/netfilter/nf_flow_table_core.c @@ -201,8 +201,8 @@ static void flow_offload_fixup_ct_timeou if (timeout < 0) timeout = 0;

- if (nf_flow_timeout_delta(ct->timeout) > (__s32)timeout) - ct->timeout = nfct_time_stamp + timeout; + if (nf_flow_timeout_delta(READ_ONCE(ct->timeout)) > (__s32)timeout) + WRITE_ONCE(ct->timeout, nfct_time_stamp + timeout); }

static void flow_offload_fixup_ct_state(struct nf_conn *ct)

From: Michal Maloszewski michal.maloszewski@intel.com

commit 1a1aa356ddf3f16539f5962c01c5f702686dfc15 upstream.

iavf_set_ringparams doesn't communicate to the user that

1. The user requested descriptor count is out of range. Instead it just quietly sets descriptors to the "clamped" value and calls it done. This makes it look an invalid value was successfully set as the descriptor count when this isn't actually true.

2. The user provided descriptor count needs to be inflated for alignment reasons.

This behavior is confusing. The ice driver has already addressed this by rejecting invalid values for descriptor count and messaging for alignment adjustments. Do the same thing here by adding the error and info messages.

Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality") Signed-off-by: Anirudh Venkataramanan anirudh.venkataramanan@intel.com Signed-off-by: Michal Maloszewski michal.maloszewski@intel.com Tested-by: Konrad Jankowski konrad0.jankowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 45 ++++++++++++++++++------- 1 file changed, 33 insertions(+), 12 deletions(-)

--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -615,23 +615,44 @@ static int iavf_set_ringparam(struct net if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL;

- new_tx_count = clamp_t(u32, ring->tx_pending, - IAVF_MIN_TXD, - IAVF_MAX_TXD); - new_tx_count = ALIGN(new_tx_count, IAVF_REQ_DESCRIPTOR_MULTIPLE); - - new_rx_count = clamp_t(u32, ring->rx_pending, - IAVF_MIN_RXD, - IAVF_MAX_RXD); - new_rx_count = ALIGN(new_rx_count, IAVF_REQ_DESCRIPTOR_MULTIPLE); + if (ring->tx_pending > IAVF_MAX_TXD || + ring->tx_pending < IAVF_MIN_TXD || + ring->rx_pending > IAVF_MAX_RXD || + ring->rx_pending < IAVF_MIN_RXD) { + netdev_err(netdev, "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d] (increment %d)\n", + ring->tx_pending, ring->rx_pending, IAVF_MIN_TXD, + IAVF_MAX_RXD, IAVF_REQ_DESCRIPTOR_MULTIPLE); + return -EINVAL; + } + + new_tx_count = ALIGN(ring->tx_pending, IAVF_REQ_DESCRIPTOR_MULTIPLE); + if (new_tx_count != ring->tx_pending) + netdev_info(netdev, "Requested Tx descriptor count rounded up to %d\n", + new_tx_count); + + new_rx_count = ALIGN(ring->rx_pending, IAVF_REQ_DESCRIPTOR_MULTIPLE); + if (new_rx_count != ring->rx_pending) + netdev_info(netdev, "Requested Rx descriptor count rounded up to %d\n", + new_rx_count);

/* if nothing to do return success */ if ((new_tx_count == adapter->tx_desc_count) && - (new_rx_count == adapter->rx_desc_count)) + (new_rx_count == adapter->rx_desc_count)) { + netdev_dbg(netdev, "Nothing to change, descriptor count is same as requested\n"); return 0; + } + + if (new_tx_count != adapter->tx_desc_count) { + netdev_dbg(netdev, "Changing Tx descriptor count from %d to %d\n", + adapter->tx_desc_count, new_tx_count); + adapter->tx_desc_count = new_tx_count; + }

- adapter->tx_desc_count = new_tx_count; - adapter->rx_desc_count = new_rx_count; + if (new_rx_count != adapter->rx_desc_count) { + netdev_dbg(netdev, "Changing Rx descriptor count from %d to %d\n", + adapter->rx_desc_count, new_rx_count); + adapter->rx_desc_count = new_rx_count; + }

if (netif_running(netdev)) { adapter->flags |= IAVF_FLAG_RESET_NEEDED;

From: Eric Dumazet edumazet@google.com

commit 4dbb0dad8e63fcd0b5a117c2861d2abe7ff5f186 upstream.

While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload()

Some error paths forgot to release a refcount on a netns.

To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload().

Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command") Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Moshe Shemesh moshe@mellanox.com Cc: Jacob Keller jacob.e.keller@intel.com Cc: Jiri Pirko jiri@nvidia.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/20211205192822.1741045-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/devlink.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/net/core/devlink.c +++ b/net/core/devlink.c @@ -4031,14 +4031,6 @@ static int devlink_nl_cmd_reload(struct return err; }

- if (info->attrs[DEVLINK_ATTR_NETNS_PID] || - info->attrs[DEVLINK_ATTR_NETNS_FD] || - info->attrs[DEVLINK_ATTR_NETNS_ID]) { - dest_net = devlink_netns_get(skb, info); - if (IS_ERR(dest_net)) - return PTR_ERR(dest_net); - } - if (info->attrs[DEVLINK_ATTR_RELOAD_ACTION]) action = nla_get_u8(info->attrs[DEVLINK_ATTR_RELOAD_ACTION]); else @@ -4081,6 +4073,14 @@ static int devlink_nl_cmd_reload(struct return -EINVAL; } } + if (info->attrs[DEVLINK_ATTR_NETNS_PID] || + info->attrs[DEVLINK_ATTR_NETNS_FD] || + info->attrs[DEVLINK_ATTR_NETNS_ID]) { + dest_net = devlink_netns_get(skb, info); + if (IS_ERR(dest_net)) + return PTR_ERR(dest_net); + } + err = devlink_reload(devlink, dest_net, action, limit, &actions_performed, info->extack);

if (dest_net)

From: Ameer Hamza amhamza.mgc@gmail.com

commit 0416e7af2369b0d12a28dea8d30b104df9a6953d upstream.

Added default case to handle undefined cmode scenario in mv88e6393x_serdes_power() and mv88e6393x_serdes_power() methods.

Addresses-Coverity: 1494644 ("Uninitialized scalar variable") Fixes: 21635d9203e1c (net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X) Reviewed-by: Marek Behún kabel@kernel.org Signed-off-by: Ameer Hamza amhamza.mgc@gmail.com Link: https://lore.kernel.org/r/20211209041552.9810-1-amhamza.mgc@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/mv88e6xxx/serdes.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/net/dsa/mv88e6xxx/serdes.c +++ b/drivers/net/dsa/mv88e6xxx/serdes.c @@ -830,7 +830,7 @@ int mv88e6390_serdes_power(struct mv88e6 bool up) { u8 cmode = chip->ports[port].cmode; - int err = 0; + int err;

switch (cmode) { case MV88E6XXX_PORT_STS_CMODE_SGMII: @@ -842,6 +842,9 @@ int mv88e6390_serdes_power(struct mv88e6 case MV88E6XXX_PORT_STS_CMODE_RXAUI: err = mv88e6390_serdes_power_10g(chip, lane, up); break; + default: + err = -EINVAL; + break; }

if (!err && up) @@ -1541,6 +1544,9 @@ int mv88e6393x_serdes_power(struct mv88e case MV88E6393X_PORT_STS_CMODE_10GBASER: err = mv88e6390_serdes_power_10g(chip, lane, on); break; + default: + err = -EINVAL; + break; }

if (err)

From: Eric Dumazet edumazet@google.com

commit 61c2402665f1e10c5742033fce18392e369931d7 upstream.

For some reason, fq_pie_destroy() did not copy working code from pie_destroy() and other qdiscs, thus causing elusive bug.

Before calling del_timer_sync(&q->adapt_timer), we need to ensure timer will not rearm itself.

rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579 (t=10501 jiffies g=13085 q=3989) NMI backtrace for cpu 0 CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:627 [inline] check_cpu_stall kernel/rcu/tree_stall.h:711 [inline] rcu_pending kernel/rcu/tree.c:3878 [inline] rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:write_comp_data kernel/kcov.c:221 [inline] RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273 Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00 RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000 RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003 RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000 pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418 fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK>

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com Cc: Mohit P. Tahiliani tahiliani@nitk.edu.in Cc: Sachin D. Patil sdp.sachin@gmail.com Cc: V. Saicharan vsaicharan1998@gmail.com Cc: Mohit Bhasi mohitbhasi1998@gmail.com Cc: Leslie Monis lesliemonis@gmail.com Cc: Gautam Ramakrishnan gautamramk@gmail.com Link: https://lore.kernel.org/r/20211209084937.3500020-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/sch_fq_pie.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/sched/sch_fq_pie.c +++ b/net/sched/sch_fq_pie.c @@ -531,6 +531,7 @@ static void fq_pie_destroy(struct Qdisc struct fq_pie_sched_data *q = qdisc_priv(sch);

tcf_block_put(q->block); + q->p_params.tupdate = 0; del_timer_sync(&q->adapt_timer); kvfree(q->flows); }

From: Sean Christopherson seanjc@google.com

commit d07898eaf39909806128caccb6ebd922ee3edd69 upstream.

Replace a WARN with a comment to call out that userspace can modify RCX during an exit to userspace to handle string I/O. KVM doesn't actually support changing the rep count during an exit, i.e. the scenario can be ignored, but the WARN needs to go as it's trivial to trigger from userspace.

Cc: stable@vger.kernel.org Fixes: 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in") Signed-off-by: Sean Christopherson seanjc@google.com Message-Id: 20211025201311.1881846-2-seanjc@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/x86.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7021,7 +7021,13 @@ static int emulator_pio_in(struct kvm_vc unsigned short port, void *val, unsigned int count) { if (vcpu->arch.pio.count) { - /* Complete previous iteration. */ + /* + * Complete a previous iteration that required userspace I/O. + * Note, @count isn't guaranteed to match pio.count as userspace + * can modify ECX before rerunning the vCPU. Ignore any such + * shenanigans as KVM doesn't support modifying the rep count, + * and the emulator ensures @count doesn't overflow the buffer. + */ } else { int r = __emulator_pio_in(vcpu, size, port, count); if (!r) @@ -7030,7 +7036,6 @@ static int emulator_pio_in(struct kvm_vc /* Results already available, fall through. */ }

- WARN_ON(count != vcpu->arch.pio.count); complete_emulator_pio_in(vcpu, val); return 1; }

From: Vitaly Kuznetsov vkuznets@redhat.com

commit 1ebfaa11ebb5b603a3c3f54b2e84fcf1030f5a14 upstream.

Prior to commit 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()"), kvm_hv_flush_tlb() was using 'KVM_REQ_TLB_FLUSH | KVM_REQUEST_NO_WAKEUP' when making a request to flush TLBs on other vCPUs and KVM_REQ_TLB_FLUSH is/was defined as:

(0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)

so KVM_REQUEST_WAIT was lost. Hyper-V TLFS, however, requires that "This call guarantees that by the time control returns back to the caller, the observable effects of all flushes on the specified virtual processors have occurred." and without KVM_REQUEST_WAIT there's a small chance that the vCPU making the TLB flush will resume running before all IPIs get delivered to other vCPUs and a stale mapping can get read there.

Fix the issue by adding KVM_REQUEST_WAIT flag to KVM_REQ_TLB_FLUSH_GUEST: kvm_hv_flush_tlb() is the sole caller which uses it for kvm_make_all_cpus_request()/kvm_make_vcpus_request_mask() where KVM_REQUEST_WAIT makes a difference.

Cc: stable@kernel.org Fixes: 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()") Signed-off-by: Vitaly Kuznetsov vkuznets@redhat.com Message-Id: 20211209102937.584397-1-vkuznets@redhat.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -98,7 +98,7 @@ KVM_ARCH_REQ_FLAGS(25, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_TLB_FLUSH_CURRENT KVM_ARCH_REQ(26) #define KVM_REQ_TLB_FLUSH_GUEST \ - KVM_ARCH_REQ_FLAGS(27, KVM_REQUEST_NO_WAKEUP) + KVM_ARCH_REQ_FLAGS(27, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_APF_READY KVM_ARCH_REQ(28) #define KVM_REQ_MSR_FILTER_CHANGED KVM_ARCH_REQ(29) #define KVM_REQ_UPDATE_CPU_DIRTY_LOGGING \

From: SeongJae Park sj@kernel.org

commit 70e9274805fccfd175d0431a947bfd11ee7df40e upstream.

Because DAMON sleeps in uninterruptible mode, /proc/loadavg reports fake load while DAMON is turned on, though it is doing nothing. This can confuse users[1]. To avoid the case, this commit makes DAMON sleeps in idle mode.

[1] https://lore.kernel.org/all/11868371.O9o76ZdvQC@natalenko.name/

Link: https://lkml.kernel.org/r/20211126145015.15862-3-sj@kernel.org Fixes: 2224d8485492 ("mm: introduce Data Access MONitor (DAMON)") Reported-by: Oleksandr Natalenko oleksandr@natalenko.name Signed-off-by: SeongJae Park sj@kernel.org Tested-by: Oleksandr Natalenko oleksandr@natalenko.name Cc: John Stultz john.stultz@linaro.org Cc: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/damon/core.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/mm/damon/core.c +++ b/mm/damon/core.c @@ -357,6 +357,15 @@ int damon_start(struct damon_ctx **ctxs, return err; }

+static void kdamond_usleep(unsigned long usecs) +{ + /* See Documentation/timers/timers-howto.rst for the thresholds */ + if (usecs > 20 * 1000) + schedule_timeout_idle(usecs_to_jiffies(usecs)); + else + usleep_idle_range(usecs, usecs + 1); +} + /* * __damon_stop() - Stops monitoring of given context. * @ctx: monitoring context @@ -370,8 +379,7 @@ static int __damon_stop(struct damon_ctx ctx->kdamond_stop = true; mutex_unlock(&ctx->kdamond_lock); while (damon_kdamond_running(ctx)) - usleep_range(ctx->sample_interval, - ctx->sample_interval * 2); + kdamond_usleep(ctx->sample_interval); return 0; } mutex_unlock(&ctx->kdamond_lock); @@ -670,7 +678,7 @@ static int kdamond_fn(void *data) ctx->callback.after_sampling(ctx)) set_kdamond_stop(ctx);

- usleep_range(ctx->sample_interval, ctx->sample_interval + 1); + kdamond_usleep(ctx->sample_interval);

if (ctx->primitive.check_accesses) max_nr_accesses = ctx->primitive.check_accesses(ctx);

From: Manjong Lee mj0123.lee@samsung.com

commit 3c376dfafbf7a8ea0dea212d095ddd83e93280bb upstream.

Initialize min_ratio if it is set during bdi unregistration. This can prevent problems that may occur a when bdi is removed without resetting min_ratio.

For example. 1) insert external sdcard 2) set external sdcard's min_ratio 70 3) remove external sdcard without setting min_ratio 0 4) insert external sdcard 5) set external sdcard's min_ratio 70 << error occur(can't set)

Because when an sdcard is removed, the present bdi_min_ratio value will remain. Currently, the only way to reset bdi_min_ratio is to reboot.

[akpm@linux-foundation.org: tweak comment and coding style]

Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com Signed-off-by: Manjong Lee mj0123.lee@samsung.com Acked-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Changheun Lee nanich.lee@samsung.com Cc: Jens Axboe axboe@kernel.dk Cc: Christoph Hellwig hch@infradead.org Cc: Matthew Wilcox willy@infradead.org Cc: seunghwan.hyun@samsung.com Cc: sookwan7.kim@samsung.com Cc: yt0928.kim@samsung.com Cc: junho89.kim@samsung.com Cc: jisoo2146.oh@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/backing-dev.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -947,6 +947,13 @@ void bdi_unregister(struct backing_dev_i wb_shutdown(&bdi->wb); cgwb_bdi_unregister(bdi);

+ /* + * If this BDI's min ratio has been set, use bdi_set_min_ratio() to + * update the global bdi_min_ratio. + */ + if (bdi->min_ratio) + bdi_set_min_ratio(bdi, 0); + if (bdi->dev) { bdi_debug_unregister(bdi); device_unregister(bdi->dev);

From: Kailang Yang kailang@realtek.com

commit d7f32791a9fcf0dae8b073cdea9b79e29098c5f4 upstream.

Lenovo ALC897 platform had headset Mic. This patch enable supported headset Mic.

Signed-off-by: Kailang Yang kailang@realtek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/baab2c2536cb4cc18677a862c6f6d840@realtek.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10231,6 +10231,27 @@ static void alc671_fixup_hp_headset_mic2 } }

+static void alc897_hp_automute_hook(struct hda_codec *codec, + struct hda_jack_callback *jack) +{ + struct alc_spec *spec = codec->spec; + int vref; + + snd_hda_gen_hp_automute(codec, jack); + vref = spec->gen.hp_jack_present ? (PIN_HP | AC_PINCTL_VREF_100) : PIN_HP; + snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + vref); +} + +static void alc897_fixup_lenovo_headset_mic(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->gen.hp_automute_hook = alc897_hp_automute_hook; + } +} + static const struct coef_fw alc668_coefs[] = { WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0), WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80), @@ -10311,6 +10332,8 @@ enum { ALC668_FIXUP_ASUS_NO_HEADSET_MIC, ALC668_FIXUP_HEADSET_MIC, ALC668_FIXUP_MIC_DET_COEF, + ALC897_FIXUP_LENOVO_HEADSET_MIC, + ALC897_FIXUP_HEADSET_MIC_PIN, };

static const struct hda_fixup alc662_fixups[] = { @@ -10717,6 +10740,19 @@ static const struct hda_fixup alc662_fix {} }, }, + [ALC897_FIXUP_LENOVO_HEADSET_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc897_fixup_lenovo_headset_mic, + }, + [ALC897_FIXUP_HEADSET_MIC_PIN] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x1a, 0x03a11050 }, + { } + }, + .chained = true, + .chain_id = ALC897_FIXUP_LENOVO_HEADSET_MIC + }, };

static const struct snd_pci_quirk alc662_fixup_tbl[] = { @@ -10761,6 +10797,10 @@ static const struct snd_pci_quirk alc662 SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x14cd, 0x5003, "USI", ALC662_FIXUP_USI_HEADSET_MODE), SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC662_FIXUP_LENOVO_MULTI_CODECS), + SND_PCI_QUIRK(0x17aa, 0x32ca, "Lenovo ThinkCentre M80", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x32f7, "Lenovo ThinkCentre M90", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x1849, 0x5892, "ASRock B150M", ALC892_FIXUP_ASROCK_MOBO),

From: Takashi Iwai tiwai@suse.de

commit 9d2479c960875ca1239bcb899f386970c13d9cfe upstream.

The period size calculation in OSS layer may receive a negative value as an error, but the code there assumes only the positive values and handle them with size_t. Due to that, a too big value may be passed to the lower layers.

This patch changes the code to handle with ssize_t and adds the proper error checks appropriately.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com Reported-by: Bixuan Cui cuibixuan@linux.alibaba.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.... Link: https://lore.kernel.org/r/20211201073606.11660-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/oss/pcm_oss.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)

--- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -147,7 +147,7 @@ snd_pcm_hw_param_value_min(const struct * * Return the maximum value for field PAR. */ -static unsigned int +static int snd_pcm_hw_param_value_max(const struct snd_pcm_hw_params *params, snd_pcm_hw_param_t var, int *dir) { @@ -682,18 +682,24 @@ static int snd_pcm_oss_period_size(struc struct snd_pcm_hw_params *oss_params, struct snd_pcm_hw_params *slave_params) { - size_t s; - size_t oss_buffer_size, oss_period_size, oss_periods; - size_t min_period_size, max_period_size; + ssize_t s; + ssize_t oss_buffer_size; + ssize_t oss_period_size, oss_periods; + ssize_t min_period_size, max_period_size; struct snd_pcm_runtime *runtime = substream->runtime; size_t oss_frame_size;

oss_frame_size = snd_pcm_format_physical_width(params_format(oss_params)) * params_channels(oss_params) / 8;

+ oss_buffer_size = snd_pcm_hw_param_value_max(slave_params, + SNDRV_PCM_HW_PARAM_BUFFER_SIZE, + NULL); + if (oss_buffer_size <= 0) + return -EINVAL; oss_buffer_size = snd_pcm_plug_client_size(substream, - snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, NULL)) * oss_frame_size; - if (!oss_buffer_size) + oss_buffer_size * oss_frame_size); + if (oss_buffer_size <= 0) return -EINVAL; oss_buffer_size = rounddown_pow_of_two(oss_buffer_size); if (atomic_read(&substream->mmap_count)) { @@ -730,7 +736,7 @@ static int snd_pcm_oss_period_size(struc

min_period_size = snd_pcm_plug_client_size(substream, snd_pcm_hw_param_value_min(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL)); - if (min_period_size) { + if (min_period_size > 0) { min_period_size *= oss_frame_size; min_period_size = roundup_pow_of_two(min_period_size); if (oss_period_size < min_period_size) @@ -739,7 +745,7 @@ static int snd_pcm_oss_period_size(struc

max_period_size = snd_pcm_plug_client_size(substream, snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL)); - if (max_period_size) { + if (max_period_size > 0) { max_period_size *= oss_frame_size; max_period_size = rounddown_pow_of_two(max_period_size); if (oss_period_size > max_period_size) @@ -752,7 +758,7 @@ static int snd_pcm_oss_period_size(struc oss_periods = substream->oss.setup.periods;

s = snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_PERIODS, NULL); - if (runtime->oss.maxfrags && s > runtime->oss.maxfrags) + if (s > 0 && runtime->oss.maxfrags && s > runtime->oss.maxfrags) s = runtime->oss.maxfrags; if (oss_periods > s) oss_periods = s;

From: Takashi Iwai tiwai@suse.de

commit 6665bb30a6b1a4a853d52557c05482ee50e71391 upstream.

A couple of calls in snd_pcm_oss_change_params_locked() ignore the possible errors. Catch those errors and abort the operation for avoiding further problems.

Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/oss/pcm_oss.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -884,8 +884,15 @@ static int snd_pcm_oss_change_params_loc err = -EINVAL; goto failure; } - choose_rate(substream, sparams, runtime->oss.rate); - snd_pcm_hw_param_near(substream, sparams, SNDRV_PCM_HW_PARAM_CHANNELS, runtime->oss.channels, NULL); + + err = choose_rate(substream, sparams, runtime->oss.rate); + if (err < 0) + goto failure; + err = snd_pcm_hw_param_near(substream, sparams, + SNDRV_PCM_HW_PARAM_CHANNELS, + runtime->oss.channels, NULL); + if (err < 0) + goto failure;

format = snd_pcm_oss_format_from(runtime->oss.format);

From: Roman Bolshakov r.bolshakov@yadro.com

commit 69002c8ce914ef0ae22a6ea14b43bb30b9a9a6a8 upstream.

Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs") introduced unconditional log string formatting to ql_dbg() even if ql_dbg_log event is disabled. It harms performance because some strings are formatted in fastpath and/or interrupt context.

Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs") Cc: Rajan Shanmugavelu rajan.shanmugavelu@oracle.com Cc: stable@vger.kernel.org Signed-off-by: Roman Bolshakov r.bolshakov@yadro.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/qla2xxx/qla_dbg.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -2491,6 +2491,9 @@ ql_dbg(uint level, scsi_qla_host_t *vha, struct va_format vaf; char pbuf[64];

+ if (!ql_mask_match(level) && !trace_ql_dbg_log_enabled()) + return; + va_start(va, fmt);

vaf.fmt = fmt;

From: Naohiro Aota naohiro.aota@wdc.com

commit 84c25448929942edacba905cecc0474e91114e7a upstream.

There is a report of a transaction abort of -EAGAIN with the following script.

#!/bin/sh

for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/${d} done

mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch

for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/${dir} --name=fio.${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.${dir} echo 3 >/proc/sys/vm/drop_caches done

for d in sda sdb; do umount /dev/${d} done

The stack trace is shown in below.

[3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown

The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN.

Fix the issue by properly re-dirtying a node on walking up the tree.

Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers") CC: stable@vger.kernel.org # 5.12+ Link: https://github.com/kdave/btrfs-progs/issues/415 Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Naohiro Aota naohiro.aota@wdc.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/tree-log.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2879,6 +2879,8 @@ static noinline int walk_up_log_tree(str path->nodes[*level]->len); if (ret) return ret; + btrfs_redirty_list_add(trans->transaction, + next); } else { if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags)) clear_extent_buffer_dirty(next); @@ -2959,6 +2961,7 @@ static int walk_log_tree(struct btrfs_tr next->start, next->len); if (ret) goto out; + btrfs_redirty_list_add(trans->transaction, next); } else { if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags)) clear_extent_buffer_dirty(next); @@ -3412,8 +3415,6 @@ static void free_log_tree(struct btrfs_t EXTENT_DIRTY | EXTENT_NEW | EXTENT_NEED_WAIT); extent_io_tree_release(&log->log_csum_range);

- if (trans && log->node) - btrfs_redirty_list_add(trans->transaction, log->node); btrfs_put_root(log); }

From: Johannes Thumshirn johannes.thumshirn@wdc.com

commit da5e817d9d75422eaaa05490d0b9a5e328fc1a51 upstream.

Fstests runs on my VMs have show several kmemleak reports like the following.

unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90

In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed.

So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory.

The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed.

CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/delalloc-space.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/fs/btrfs/delalloc-space.c +++ b/fs/btrfs/delalloc-space.c @@ -143,10 +143,13 @@ int btrfs_check_data_free_space(struct b

/* Use new btrfs_qgroup_reserve_data to reserve precious data space. */ ret = btrfs_qgroup_reserve_data(inode, reserved, start, len); - if (ret < 0) + if (ret < 0) { btrfs_free_reserved_data_space_noquota(fs_info, len); - else + extent_changeset_free(*reserved); + *reserved = NULL; + } else { ret = 0; + } return ret; }

@@ -452,8 +455,11 @@ int btrfs_delalloc_reserve_space(struct if (ret < 0) return ret; ret = btrfs_delalloc_reserve_metadata(inode, len); - if (ret < 0) + if (ret < 0) { btrfs_free_reserved_data_space(inode, *reserved, start, len); + extent_changeset_free(*reserved); + *reserved = NULL; + } return ret; }

From: Adrian Hunter adrian.hunter@intel.com

commit ad106a26aef3a95ac7ca88d033b431661ba346ce upstream.

When syncing, it may be that branch packet generation is not enabled at that point, in which case there will not immediately be a control-flow packet, so some packets before a control flow packet turns up, get ignored. However, the decoder is in sync as soon as a PSB is found, so the state should be set accordingly.

Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -3607,7 +3607,7 @@ static int intel_pt_sync(struct intel_pt }

decoder->have_last_ip = true; - decoder->pkt_state = INTEL_PT_STATE_NO_IP; + decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;

err = intel_pt_walk_psb(decoder); if (err)

From: Adrian Hunter adrian.hunter@intel.com

commit c79ee2b2160909889df67c8801352d3e69d43a1a upstream.

An overflow (OVF packet) is treated as an error because it represents a loss of trace data, but there is no loss of synchronization, so the packet state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.

To support that, some additional variables must be reset, and the FUP packet that may follow OVF is treated as an FUP event.

Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 32 +++++++++++++++++--- 1 file changed, 28 insertions(+), 4 deletions(-)

--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -1248,6 +1248,20 @@ static bool intel_pt_fup_event(struct in decoder->state.type |= INTEL_PT_BLK_ITEMS; ret = true; } + if (decoder->overflow) { + decoder->overflow = false; + if (!ret && !decoder->pge) { + if (decoder->hop) { + decoder->state.type = 0; + decoder->pkt_state = INTEL_PT_STATE_RESAMPLE; + } + decoder->pge = true; + decoder->state.type |= INTEL_PT_BRANCH | INTEL_PT_TRACE_BEGIN; + decoder->state.from_ip = 0; + decoder->state.to_ip = decoder->ip; + return true; + } + } if (ret) { decoder->state.from_ip = decoder->ip; decoder->state.to_ip = 0; @@ -1601,7 +1615,16 @@ static int intel_pt_overflow(struct inte intel_pt_clear_tx_flags(decoder); intel_pt_set_nr(decoder); decoder->timestamp_insn_cnt = 0; - decoder->pkt_state = INTEL_PT_STATE_ERR_RESYNC; + decoder->pkt_state = INTEL_PT_STATE_IN_SYNC; + decoder->state.from_ip = decoder->ip; + decoder->ip = 0; + decoder->pge = false; + decoder->set_fup_tx_flags = false; + decoder->set_fup_ptw = false; + decoder->set_fup_mwait = false; + decoder->set_fup_pwre = false; + decoder->set_fup_exstop = false; + decoder->set_fup_bep = false; decoder->overflow = true; return -EOVERFLOW; } @@ -2956,6 +2979,7 @@ next:

case INTEL_PT_TIP_PGE: { decoder->pge = true; + decoder->overflow = false; intel_pt_mtc_cyc_cnt_pge(decoder); intel_pt_set_nr(decoder); if (decoder->packet.count == 0) { @@ -3461,10 +3485,10 @@ static int intel_pt_sync_ip(struct intel decoder->set_fup_pwre = false; decoder->set_fup_exstop = false; decoder->set_fup_bep = false; + decoder->overflow = false;

if (!decoder->branch_enable) { decoder->pkt_state = INTEL_PT_STATE_IN_SYNC; - decoder->overflow = false; decoder->state.type = 0; /* Do not have a sample */ return 0; } @@ -3479,7 +3503,6 @@ static int intel_pt_sync_ip(struct intel decoder->pkt_state = INTEL_PT_STATE_RESAMPLE; else decoder->pkt_state = INTEL_PT_STATE_IN_SYNC; - decoder->overflow = false;

decoder->state.from_ip = 0; decoder->state.to_ip = decoder->ip; @@ -3698,7 +3721,8 @@ const struct intel_pt_state *intel_pt_de

if (err) { decoder->state.err = intel_pt_ext_err(err); - decoder->state.from_ip = decoder->ip; + if (err != -EOVERFLOW) + decoder->state.from_ip = decoder->ip; intel_pt_update_sample_time(decoder); decoder->sample_tot_cyc_cnt = decoder->tot_cyc_cnt; intel_pt_set_nr(decoder);

From: Adrian Hunter adrian.hunter@intel.com

commit a882cc94971093e146ffa1163b140ad956236754 upstream.

FUP packets contain IP information, which makes them also an 'instruction' event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so restructure the logic so that FUP events are added along with appropriate 'instruction' and 'branch' events.

Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -2682,6 +2682,8 @@ static int intel_pt_scan_for_psb(struct /* Hop mode: Ignore TNT, do not walk code, but get ip from FUPs and TIPs */ static int intel_pt_hop_trace(struct intel_pt_decoder *decoder, bool *no_tip, int *err) { + *err = 0; + /* Leap from PSB to PSB, getting ip from FUP within PSB+ */ if (decoder->leap && !decoder->in_psb && decoder->packet.type != INTEL_PT_PSB) { *err = intel_pt_scan_for_psb(decoder); @@ -2722,18 +2724,21 @@ static int intel_pt_hop_trace(struct int if (!decoder->packet.count) return HOP_IGNORE; intel_pt_set_ip(decoder); - if (intel_pt_fup_event(decoder)) - return HOP_RETURN; + if (decoder->set_fup_mwait || decoder->set_fup_pwre) + *no_tip = true; if (!decoder->branch_enable || !decoder->pge) *no_tip = true; if (*no_tip) { decoder->state.type = INTEL_PT_INSTRUCTION; decoder->state.from_ip = decoder->ip; decoder->state.to_ip = 0; + intel_pt_fup_event(decoder); return HOP_RETURN; } + intel_pt_fup_event(decoder); + decoder->state.type |= INTEL_PT_INSTRUCTION | INTEL_PT_BRANCH; *err = intel_pt_walk_fup_tip(decoder); - if (!*err) + if (!*err && decoder->state.to_ip) decoder->pkt_state = INTEL_PT_STATE_RESAMPLE; return HOP_RETURN;

From: Markus Hochholdinger markus@hochholdinger.net

commit 55df1ce0d4e086e05a8ab20619c73c729350f965 upstream.

The superblock of version 1.0 doesn't get moved to the new position on a device size change. This leads to a rdev without a superblock on a known position, the raid can't be re-assembled.

The line was removed by mistake and is re-added by this patch.

Fixes: d9c0fa509eaf ("md: fix max sectors calculation for super 1.0") Cc: stable@vger.kernel.org Signed-off-by: Markus Hochholdinger markus@hochholdinger.net Reviewed-by: Xiao Ni xni@redhat.com Signed-off-by: Song Liu songliubraving@fb.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2193,6 +2193,7 @@ super_1_rdev_size_change(struct md_rdev

if (!num_sectors || num_sectors > max_sectors) num_sectors = max_sectors; + rdev->sb_start = sb_start; } sb = page_address(rdev->sb_page); sb->data_size = cpu_to_le64(num_sectors);

From: Alexander Sverdlin alexander.sverdlin@nokia.com

commit b10252c7ae9c9d7c90552f88b544a44ee773af64 upstream.

Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") has re-opened rpc_pipefs_event() race against nfsd_net_id registration (register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76 ("nfsd: fix nsfd startup race triggering BUG_ON").

Restore the order of register_pernet_subsys() vs register_cld_notifier(). Add WARN_ON() to prevent a future regression.

Crash info: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012 CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1 pc : rpc_pipefs_event+0x54/0x120 [nfsd] lr : rpc_pipefs_event+0x48/0x120 [nfsd] Call trace: rpc_pipefs_event+0x54/0x120 [nfsd] blocking_notifier_call_chain rpc_fill_super get_tree_keyed rpc_fs_get_tree vfs_get_tree do_mount ksys_mount __arm64_sys_mount el0_svc_handler el0_svc

Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin alexander.sverdlin@nokia.com Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nfsd/nfs4recover.c | 1 + fs/nfsd/nfsctl.c | 14 +++++++------- 2 files changed, 8 insertions(+), 7 deletions(-)

--- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -2156,6 +2156,7 @@ static struct notifier_block nfsd4_cld_b int register_cld_notifier(void) { + WARN_ON(!nfsd_net_id); return rpc_pipefs_notifier_register(&nfsd4_cld_block); }

--- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -1521,12 +1521,9 @@ static int __init init_nfsd(void) int retval; printk(KERN_INFO "Installing knfsd (copyright (C) 1996 okir@monad.swb.de).\n");

- retval = register_cld_notifier(); - if (retval) - return retval; retval = nfsd4_init_slabs(); if (retval) - goto out_unregister_notifier; + return retval; retval = nfsd4_init_pnfs(); if (retval) goto out_free_slabs; @@ -1545,9 +1542,14 @@ static int __init init_nfsd(void) goto out_free_exports; retval = register_pernet_subsys(&nfsd_net_ops); if (retval < 0) + goto out_free_filesystem; + retval = register_cld_notifier(); + if (retval) goto out_free_all; return 0; out_free_all: + unregister_pernet_subsys(&nfsd_net_ops); +out_free_filesystem: unregister_filesystem(&nfsd_fs_type); out_free_exports: remove_proc_entry("fs/nfs/exports", NULL); @@ -1561,13 +1563,12 @@ out_free_pnfs: nfsd4_exit_pnfs(); out_free_slabs: nfsd4_free_slabs(); -out_unregister_notifier: - unregister_cld_notifier(); return retval; }

static void __exit exit_nfsd(void) { + unregister_cld_notifier(); unregister_pernet_subsys(&nfsd_net_ops); nfsd_drc_slab_free(); remove_proc_entry("fs/nfs/exports", NULL); @@ -1577,7 +1578,6 @@ static void __exit exit_nfsd(void) nfsd4_free_slabs(); nfsd4_exit_pnfs(); unregister_filesystem(&nfsd_fs_type); - unregister_cld_notifier(); }

MODULE_AUTHOR("Olaf Kirch okir@monad.swb.de");

From: Paolo Bonzini pbonzini@redhat.com

commit c8cc43c1eae2910ac96daa4216e0fb3391ad0504 upstream.

AMD proceessors define an address range that is reserved by HyperTransport and causes a failure if used for guest physical addresses. Avoid selftests failures by reserving those guest physical addresses; the rules are:

- On parts with <40 bits, its fully hidden from software.

- Before Fam17h, it was always 12G just below 1T, even if there was more RAM above this location. In this case we just not use any RAM above 1T.

- On Fam17h and later, it is variable based on SME, and is either just below 2^48 (no encryption) or 2^43 (encryption).

Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()") Cc: stable@vger.kernel.org Cc: David Matlack dmatlack@google.com Reported-by: Maxim Levitsky mlevitsk@redhat.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Message-Id: 20210805105423.412878-1-pbonzini@redhat.com Reviewed-by: Sean Christopherson seanjc@google.com Tested-by: Sean Christopherson seanjc@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/kvm/include/kvm_util.h | 9 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 2 tools/testing/selftests/kvm/lib/x86_64/processor.c | 68 +++++++++++++++++++++ 3 files changed, 78 insertions(+), 1 deletion(-)

--- a/tools/testing/selftests/kvm/include/kvm_util.h +++ b/tools/testing/selftests/kvm/include/kvm_util.h @@ -69,6 +69,15 @@ enum vm_guest_mode {

#endif

+#if defined(__x86_64__) +unsigned long vm_compute_max_gfn(struct kvm_vm *vm); +#else +static inline unsigned long vm_compute_max_gfn(struct kvm_vm *vm) +{ + return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1; +} +#endif + #define MIN_PAGE_SIZE (1U << MIN_PAGE_SHIFT) #define PTES_PER_MIN_PAGE ptes_per_page(MIN_PAGE_SIZE)

--- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -307,7 +307,7 @@ struct kvm_vm *vm_create(enum vm_guest_m (1ULL << (vm->va_bits - 1)) >> vm->page_shift);

/* Limit physical addresses to PA-bits. */ - vm->max_gfn = ((1ULL << vm->pa_bits) >> vm->page_shift) - 1; + vm->max_gfn = vm_compute_max_gfn(vm);

/* Allocate and setup memory for guest. */ vm->vpages_mapped = sparsebit_alloc(); --- a/tools/testing/selftests/kvm/lib/x86_64/processor.c +++ b/tools/testing/selftests/kvm/lib/x86_64/processor.c @@ -1433,3 +1433,71 @@ struct kvm_cpuid2 *vcpu_get_supported_hv

return cpuid; } + +#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541 +#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163 +#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65 + +static inline unsigned x86_family(unsigned int eax) +{ + unsigned int x86; + + x86 = (eax >> 8) & 0xf; + + if (x86 == 0xf) + x86 += (eax >> 20) & 0xff; + + return x86; +} + +unsigned long vm_compute_max_gfn(struct kvm_vm *vm) +{ + const unsigned long num_ht_pages = 12 << (30 - vm->page_shift); /* 12 GiB */ + unsigned long ht_gfn, max_gfn, max_pfn; + uint32_t eax, ebx, ecx, edx, max_ext_leaf; + + max_gfn = (1ULL << (vm->pa_bits - vm->page_shift)) - 1; + + /* Avoid reserved HyperTransport region on AMD processors. */ + eax = ecx = 0; + cpuid(&eax, &ebx, &ecx, &edx); + if (ebx != X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx || + ecx != X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx || + edx != X86EMUL_CPUID_VENDOR_AuthenticAMD_edx) + return max_gfn; + + /* On parts with <40 physical address bits, the area is fully hidden */ + if (vm->pa_bits < 40) + return max_gfn; + + /* Before family 17h, the HyperTransport area is just below 1T. */ + ht_gfn = (1 << 28) - num_ht_pages; + eax = 1; + cpuid(&eax, &ebx, &ecx, &edx); + if (x86_family(eax) < 0x17) + goto done; + + /* + * Otherwise it's at the top of the physical address space, possibly + * reduced due to SME by bits 11:6 of CPUID[0x8000001f].EBX. Use + * the old conservative value if MAXPHYADDR is not enumerated. + */ + eax = 0x80000000; + cpuid(&eax, &ebx, &ecx, &edx); + max_ext_leaf = eax; + if (max_ext_leaf < 0x80000008) + goto done; + + eax = 0x80000008; + cpuid(&eax, &ebx, &ecx, &edx); + max_pfn = (1ULL << ((eax & 0xff) - vm->page_shift)) - 1; + if (max_ext_leaf >= 0x8000001f) { + eax = 0x8000001f; + cpuid(&eax, &ebx, &ecx, &edx); + max_pfn >>= (ebx >> 6) & 0x3f; + } + + ht_gfn = max_pfn - num_ht_pages; +done: + return min(max_gfn, ht_gfn - 1); +}

From: Wolfram Sang wsa+renesas@sang-engineering.com

commit 7dba402807a85fa3723f4a27504813caf81cc9d7 upstream.

'cmd_error' is not necessarily initialized on some error paths in mmc_send_tuning(). Initialize it.

Fixes: 2c9017d0b5d3 ("mmc: renesas_sdhi: abort tuning when timeout detected") Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211130132309.18246-1-wsa+renesas@sang-engineerin... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/renesas_sdhi_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -673,7 +673,7 @@ static int renesas_sdhi_execute_tuning(s

/* Issue CMD19 twice for each tap */ for (i = 0; i < 2 * priv->tap_num; i++) { - int cmd_error; + int cmd_error = 0;

/* Set sampling clock position */ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % priv->tap_num);

From: Sumeet Pawnikar sumeet.r.pawnikar@intel.com

commit f872f73601b92c86f3da8bdf3e19abd0f1780eb9 upstream.

The VCoRefLow CPU FIVR register definition for Tiger Lake is incorrect.

Current implementation reads it from MMIO offset 0x5A18 and bit offset [12:14], but the actual correct register definition is from bit offset [11:13].

Update to fix the bit offset.

Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver") Signed-off-by: Sumeet Pawnikar sumeet.r.pawnikar@intel.com Cc: 5.14+ stable@vger.kernel.org # 5.14+ [ rjw: New subject, changelog edits ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c @@ -29,7 +29,7 @@ static const char * const fivr_strings[] };

static const struct mmio_reg tgl_fivr_mmio_regs[] = { - { 0, 0x5A18, 3, 0x7, 12}, /* vco_ref_code_lo */ + { 0, 0x5A18, 3, 0x7, 11}, /* vco_ref_code_lo */ { 0, 0x5A18, 8, 0xFF, 16}, /* vco_ref_code_hi */ { 0, 0x5A08, 8, 0xFF, 0}, /* spread_spectrum_pct */ { 0, 0x5A08, 1, 0x1, 8}, /* spread_spectrum_clk_enable */

From: Hannes Reinecke hare@suse.de

commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream.

The ASMedia 1092 has a configuration mode which will present a dummy device; sadly the implementation falsely claims to provide a device with 100M which doesn't actually exist. So disable this device to avoid errors during boot.

Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke hare@suse.de Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-core.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3856,6 +3856,8 @@ static const struct ata_blacklist_entry { "VRFDFC22048UCHC-TE*", NULL, ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, + /* Similar story with ASMedia 1092 */ + { "ASMT109x- Config", NULL, ATA_HORKAGE_DISABLE },

/* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },

From: Eric Biggers ebiggers@google.com

commit 42288cb44c4b5fff7653bc392b583a2b8bd6a8c0 upstream.

Several ->poll() implementations are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, using 'wake_up_poll(wq, EPOLLHUP | POLLFREE);'.

However, that has a bug: wake_up_poll() calls __wake_up() with nr_exclusive=1. Therefore, if there are multiple "exclusive" waiters, and the wakeup function for the first one returns a positive value, only that one will be called. That's *not* what's needed for POLLFREE; POLLFREE is special in that it really needs to wake up everyone.

Considering the three non-blocking poll systems:

- io_uring poll doesn't handle POLLFREE at all, so it is broken anyway.

- aio poll is unaffected, since it doesn't support exclusive waits. However, that's fragile, as someone could add this feature later.

- epoll doesn't appear to be broken by this, since its wakeup function returns 0 when it sees POLLFREE. But this is fragile.

Although there is a workaround (see epoll), it's better to define a function which always sends POLLFREE to all waiters. Add such a function. Also make it verify that the queue really becomes empty after all waiters have been woken up.

Reported-by: Linus Torvalds torvalds@linux-foundation.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211209010455.42744-2-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/wait.h | 26 ++++++++++++++++++++++++++ kernel/sched/wait.c | 7 +++++++ 2 files changed, 33 insertions(+)

--- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,7 @@ void __wake_up_sync_key(struct wait_queu void __wake_up_locked_sync_key(struct wait_queue_head *wq_head, unsigned int mode, void *key); void __wake_up_locked(struct wait_queue_head *wq_head, unsigned int mode, int nr); void __wake_up_sync(struct wait_queue_head *wq_head, unsigned int mode); +void __wake_up_pollfree(struct wait_queue_head *wq_head);

#define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) #define wake_up_nr(x, nr) __wake_up(x, TASK_NORMAL, nr, NULL) @@ -245,6 +246,31 @@ void __wake_up_sync(struct wait_queue_he #define wake_up_interruptible_sync_poll_locked(x, m) \ __wake_up_locked_sync_key((x), TASK_INTERRUPTIBLE, poll_to_key(m))

+/** + * wake_up_pollfree - signal that a polled waitqueue is going away + * @wq_head: the wait queue head + * + * In the very rare cases where a ->poll() implementation uses a waitqueue whose + * lifetime is tied to a task rather than to the 'struct file' being polled, + * this function must be called before the waitqueue is freed so that + * non-blocking polls (e.g. epoll) are notified that the queue is going away. + * + * The caller must also RCU-delay the freeing of the wait_queue_head, e.g. via + * an explicit synchronize_rcu() or call_rcu(), or via SLAB_TYPESAFE_BY_RCU. + */ +static inline void wake_up_pollfree(struct wait_queue_head *wq_head) +{ + /* + * For performance reasons, we don't always take the queue lock here. + * Therefore, we might race with someone removing the last entry from + * the queue, and proceed while they still hold the queue lock. + * However, rcu_read_lock() is required to be held in such cases, so we + * can safely proceed with an RCU-delayed free. + */ + if (waitqueue_active(wq_head)) + __wake_up_pollfree(wq_head); +} + #define ___wait_cond_timeout(condition) \ ({ \ bool __cond = (condition); \ --- a/kernel/sched/wait.c +++ b/kernel/sched/wait.c @@ -238,6 +238,13 @@ void __wake_up_sync(struct wait_queue_he } EXPORT_SYMBOL_GPL(__wake_up_sync); /* For internal use only */

+void __wake_up_pollfree(struct wait_queue_head *wq_head) +{ + __wake_up(wq_head, TASK_NORMAL, 0, poll_to_key(EPOLLHUP | POLLFREE)); + /* POLLFREE must have cleared the queue. */ + WARN_ON_ONCE(waitqueue_active(wq_head)); +} + /* * Note: we use "set_current_state()" _after_ the wait-queue add, * because we need a memory barrier there on SMP, so that any

From: Eric Biggers ebiggers@google.com

commit 9537bae0da1f8d1e2361ab6d0479e8af7824e160 upstream.

wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll and aio poll are fortunately not affected by this, but it's very fragile. Thus, the new function wake_up_pollfree() has been introduced.

Convert signalfd to use wake_up_pollfree().

Reported-by: Linus Torvalds torvalds@linux-foundation.org Fixes: d80e731ecab4 ("epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211209010455.42744-4-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/signalfd.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)

--- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -35,17 +35,7 @@

void signalfd_cleanup(struct sighand_struct *sighand) { - wait_queue_head_t *wqh = &sighand->signalfd_wqh; - /* - * The lockless check can race with remove_wait_queue() in progress, - * but in this case its caller should run under rcu_read_lock() and - * sighand_cachep is SLAB_TYPESAFE_BY_RCU, we can safely return. - */ - if (likely(!waitqueue_active(wqh))) - return; - - /* wait_queue_entry_t->func(POLLFREE) should do remove_wait_queue() */ - wake_up_poll(wqh, EPOLLHUP | POLLFREE); + wake_up_pollfree(&sighand->signalfd_wqh); }

struct signalfd_ctx {

From: Eric Biggers ebiggers@google.com

commit 50252e4b5e989ce64555c7aef7516bdefc2fea72 upstream.

signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters.

Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed.

Fix this by making aio poll handle POLLFREE.

A patch by Ramji Jiyani ramjiyani@google.com (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued.

The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.

Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL") Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/aio.c | 137 ++++++++++++++++++++++++++++++---------- include/uapi/asm-generic/poll.h | 2 2 files changed, 107 insertions(+), 32 deletions(-)

--- a/fs/aio.c +++ b/fs/aio.c @@ -1621,6 +1621,51 @@ static void aio_poll_put_work(struct wor iocb_put(iocb); }

+/* + * Safely lock the waitqueue which the request is on, synchronizing with the + * case where the ->poll() provider decides to free its waitqueue early. + * + * Returns true on success, meaning that req->head->lock was locked, req->wait + * is on req->head, and an RCU read lock was taken. Returns false if the + * request was already removed from its waitqueue (which might no longer exist). + */ +static bool poll_iocb_lock_wq(struct poll_iocb *req) +{ + wait_queue_head_t *head; + + /* + * While we hold the waitqueue lock and the waitqueue is nonempty, + * wake_up_pollfree() will wait for us. However, taking the waitqueue + * lock in the first place can race with the waitqueue being freed. + * + * We solve this as eventpoll does: by taking advantage of the fact that + * all users of wake_up_pollfree() will RCU-delay the actual free. If + * we enter rcu_read_lock() and see that the pointer to the queue is + * non-NULL, we can then lock it without the memory being freed out from + * under us, then check whether the request is still on the queue. + * + * Keep holding rcu_read_lock() as long as we hold the queue lock, in + * case the caller deletes the entry from the queue, leaving it empty. + * In that case, only RCU prevents the queue memory from being freed. + */ + rcu_read_lock(); + head = smp_load_acquire(&req->head); + if (head) { + spin_lock(&head->lock); + if (!list_empty(&req->wait.entry)) + return true; + spin_unlock(&head->lock); + } + rcu_read_unlock(); + return false; +} + +static void poll_iocb_unlock_wq(struct poll_iocb *req) +{ + spin_unlock(&req->head->lock); + rcu_read_unlock(); +} + static void aio_poll_complete_work(struct work_struct *work) { struct poll_iocb *req = container_of(work, struct poll_iocb, work); @@ -1640,24 +1685,25 @@ static void aio_poll_complete_work(struc * avoid further branches in the fast path. */ spin_lock_irq(&ctx->ctx_lock); - spin_lock(&req->head->lock); - if (!mask && !READ_ONCE(req->cancelled)) { - /* - * The request isn't actually ready to be completed yet. - * Reschedule completion if another wakeup came in. - */ - if (req->work_need_resched) { - schedule_work(&req->work); - req->work_need_resched = false; - } else { - req->work_scheduled = false; + if (poll_iocb_lock_wq(req)) { + if (!mask && !READ_ONCE(req->cancelled)) { + /* + * The request isn't actually ready to be completed yet. + * Reschedule completion if another wakeup came in. + */ + if (req->work_need_resched) { + schedule_work(&req->work); + req->work_need_resched = false; + } else { + req->work_scheduled = false; + } + poll_iocb_unlock_wq(req); + spin_unlock_irq(&ctx->ctx_lock); + return; } - spin_unlock(&req->head->lock); - spin_unlock_irq(&ctx->ctx_lock); - return; - } - list_del_init(&req->wait.entry); - spin_unlock(&req->head->lock); + list_del_init(&req->wait.entry); + poll_iocb_unlock_wq(req); + } /* else, POLLFREE has freed the waitqueue, so we must complete */ list_del_init(&iocb->ki_list); iocb->ki_res.res = mangle_poll(mask); spin_unlock_irq(&ctx->ctx_lock); @@ -1671,13 +1717,14 @@ static int aio_poll_cancel(struct kiocb struct aio_kiocb *aiocb = container_of(iocb, struct aio_kiocb, rw); struct poll_iocb *req = &aiocb->poll;

- spin_lock(&req->head->lock); - WRITE_ONCE(req->cancelled, true); - if (!req->work_scheduled) { - schedule_work(&aiocb->poll.work); - req->work_scheduled = true; - } - spin_unlock(&req->head->lock); + if (poll_iocb_lock_wq(req)) { + WRITE_ONCE(req->cancelled, true); + if (!req->work_scheduled) { + schedule_work(&aiocb->poll.work); + req->work_scheduled = true; + } + poll_iocb_unlock_wq(req); + } /* else, the request was force-cancelled by POLLFREE already */

return 0; } @@ -1729,7 +1776,8 @@ static int aio_poll_wake(struct wait_que * * Don't remove the request from the waitqueue here, as it might * not actually be complete yet (we won't know until vfs_poll() - * is called), and we must not miss any wakeups. + * is called), and we must not miss any wakeups. POLLFREE is an + * exception to this; see below. */ if (req->work_scheduled) { req->work_need_resched = true; @@ -1737,6 +1785,28 @@ static int aio_poll_wake(struct wait_que schedule_work(&req->work); req->work_scheduled = true; } + + /* + * If the waitqueue is being freed early but we can't complete + * the request inline, we have to tear down the request as best + * we can. That means immediately removing the request from its + * waitqueue and preventing all further accesses to the + * waitqueue via the request. We also need to schedule the + * completion work (done above). Also mark the request as + * cancelled, to potentially skip an unneeded call to ->poll(). + */ + if (mask & POLLFREE) { + WRITE_ONCE(req->cancelled, true); + list_del_init(&req->wait.entry); + + /* + * Careful: this *must* be the last step, since as soon + * as req->head is NULL'ed out, the request can be + * completed and freed, since aio_poll_complete_work() + * will no longer need to take the waitqueue lock. + */ + smp_store_release(&req->head, NULL); + } } return 1; } @@ -1744,6 +1814,7 @@ static int aio_poll_wake(struct wait_que struct aio_poll_table { struct poll_table_struct pt; struct aio_kiocb *iocb; + bool queued; int error; };

@@ -1754,11 +1825,12 @@ aio_poll_queue_proc(struct file *file, s struct aio_poll_table *pt = container_of(p, struct aio_poll_table, pt);

/* multiple wait queues per file are not supported */ - if (unlikely(pt->iocb->poll.head)) { + if (unlikely(pt->queued)) { pt->error = -EINVAL; return; }

+ pt->queued = true; pt->error = 0; pt->iocb->poll.head = head; add_wait_queue(head, &pt->iocb->poll.wait); @@ -1790,6 +1862,7 @@ static int aio_poll(struct aio_kiocb *ai apt.pt._qproc = aio_poll_queue_proc; apt.pt._key = req->events; apt.iocb = aiocb; + apt.queued = false; apt.error = -EINVAL; /* same as no support for IOCB_CMD_POLL */

/* initialized the list so that we can do list_empty checks */ @@ -1798,9 +1871,10 @@ static int aio_poll(struct aio_kiocb *ai

mask = vfs_poll(req->file, &apt.pt) & req->events; spin_lock_irq(&ctx->ctx_lock); - if (likely(req->head)) { - spin_lock(&req->head->lock); - if (list_empty(&req->wait.entry) || req->work_scheduled) { + if (likely(apt.queued)) { + bool on_queue = poll_iocb_lock_wq(req); + + if (!on_queue || req->work_scheduled) { /* * aio_poll_wake() already either scheduled the async * completion work, or completed the request inline. @@ -1816,7 +1890,7 @@ static int aio_poll(struct aio_kiocb *ai } else if (cancel) { /* Cancel if possible (may be too late though). */ WRITE_ONCE(req->cancelled, true); - } else if (!list_empty(&req->wait.entry)) { + } else if (on_queue) { /* * Actually waiting for an event, so add the request to * active_reqs so that it can be cancelled if needed. @@ -1824,7 +1898,8 @@ static int aio_poll(struct aio_kiocb *ai list_add_tail(&aiocb->ki_list, &ctx->active_reqs); aiocb->ki_cancel = aio_poll_cancel; } - spin_unlock(&req->head->lock); + if (on_queue) + poll_iocb_unlock_wq(req); } if (mask) { /* no async, we'd stolen it */ aiocb->ki_res.res = mangle_poll(mask); --- a/include/uapi/asm-generic/poll.h +++ b/include/uapi/asm-generic/poll.h @@ -29,7 +29,7 @@ #define POLLRDHUP 0x2000 #endif

-#define POLLFREE (__force __poll_t)0x4000 /* currently only for epoll */ +#define POLLFREE (__force __poll_t)0x4000

#define POLL_BUSY_LOOP (__force __poll_t)0x8000

From: Chris Packham chris.packham@alliedtelesis.co.nz

commit a74c313aca266fab0d1d1a72becbb8b7b5286b6e upstream.

Maxime points out that the polling code in mpc_i2c_isr should use the _atomic API because it is called in an irq context and that the behaviour of the MCF bit is that it is 1 when the byte transfer is complete. All of this means the original code was effectively a udelay(100).

Fix this by using readb_poll_timeout_atomic() and removing the negation of the break condition.

Fixes: 4a8ac5e45cda ("i2c: mpc: Poll for MCF") Reported-by: Maxime Bizon mbizon@freebox.fr Signed-off-by: Chris Packham chris.packham@alliedtelesis.co.nz Tested-by: Maxime Bizon mbizon@freebox.fr Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-mpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -636,7 +636,7 @@ static irqreturn_t mpc_i2c_isr(int irq, status = readb(i2c->base + MPC_I2C_SR); if (status & CSR_MIF) { /* Wait up to 100us for transfer to properly complete */ - readb_poll_timeout(i2c->base + MPC_I2C_SR, status, !(status & CSR_MCF), 0, 100); + readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100); writeb(0, i2c->base + MPC_I2C_SR); mpc_i2c_do_intr(i2c, status); return IRQ_HANDLED;

From: Igor Pylypiv ipylypiv@google.com

commit 653926205741add87a6cf452e21950eebc6ac10b upstream.

Calling scsi_remove_host() before scsi_add_host() results in a crash:

BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90

We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time.

Function call tree:

pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host()

Link: https://lore.kernel.org/r/20211201041627.1592487-1-ipylypiv@google.com Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Vishakha Channapattan vishakhavc@google.com Acked-by: Jack Wang jinpu.wang@ionos.com Signed-off-by: Igor Pylypiv ipylypiv@google.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/pm8001/pm8001_init.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -281,12 +281,12 @@ static int pm8001_alloc(struct pm8001_hb if (rc) { pm8001_dbg(pm8001_ha, FAIL, "pm8001_setup_irq failed [ret: %d]\n", rc); - goto err_out_shost; + goto err_out; } /* Request Interrupt */ rc = pm8001_request_irq(pm8001_ha); if (rc) - goto err_out_shost; + goto err_out;

count = pm8001_ha->max_q_num; /* Queues are chosen based on the number of cores/msix availability */ @@ -422,8 +422,6 @@ static int pm8001_alloc(struct pm8001_hb pm8001_tag_init(pm8001_ha); return 0;

-err_out_shost: - scsi_remove_host(pm8001_ha->shost); err_out_nodev: for (i = 0; i < pm8001_ha->max_memcnt; i++) { if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {

From: Geraldo Nascimento geraldogabriel@gmail.com

commit fb1af5bea4670c835e42fc0c14c49d3499468774 upstream.

Olivia Mackintosh has posted to alsa-devel reporting that there's a potential bug that could break mixer quirks for Pioneer devices introduced by 6d27788160362a7ee6c0d317636fe4b1ddbe59a7 "ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard".

This happened because the DJM 750 MK2 was added last to the Pioneer DJM device table index and defined as 0x4 but was added to snd_djm_devices[] just after the DJM 750 (MK1) entry instead of last, after the DJM 900 NXS2. This escaped review.

To prevent that from ever happening again, Takashi Iwai suggested to use C99 array designators in snd_djm_devices[] instead of simply reordering the entries.

Fixes: 6d2778816036 ("ALSA: usb-audio: Add support for the Pioneer DJM 750MK2") Reported-by: Olivia Mackintosh livvy@base.nu Suggested-by: Takashi Iwai tiwai@suse.de Signed-off-by: Geraldo Nascimento geraldogabriel@gmail.com Link: https://lore.kernel.org/r/Yau46FDzoql0SNnW@geday Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/mixer_quirks.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3016,11 +3016,11 @@ static const struct snd_djm_ctl snd_djm_

static const struct snd_djm_device snd_djm_devices[] = { - SND_DJM_DEVICE(250mk2), - SND_DJM_DEVICE(750), - SND_DJM_DEVICE(750mk2), - SND_DJM_DEVICE(850), - SND_DJM_DEVICE(900nxs2) + [SND_DJM_250MK2_IDX] = SND_DJM_DEVICE(250mk2), + [SND_DJM_750_IDX] = SND_DJM_DEVICE(750), + [SND_DJM_850_IDX] = SND_DJM_DEVICE(850), + [SND_DJM_900NXS2_IDX] = SND_DJM_DEVICE(900nxs2), + [SND_DJM_750MK2_IDX] = SND_DJM_DEVICE(750mk2), };

From: Rafael J. Wysocki rafael.j.wysocki@intel.com

commit 444dd878e85fb33fcfb2682cfdab4c236f33ea3e upstream.

The kerneldoc comment of pm_runtime_active() does not reflect the behavior of the function, so update it accordingly.

Fixes: 403d2d116ec0 ("PM: runtime: Add kerneldoc comments to multiple helpers") Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/pm_runtime.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -129,7 +129,7 @@ static inline bool pm_runtime_suspended( * pm_runtime_active - Check whether or not a device is runtime-active. * @dev: Target device. * - * Return %true if runtime PM is enabled for @dev and its runtime PM status is + * Return %true if runtime PM is disabled for @dev or its runtime PM status is * %RPM_ACTIVE, or %false otherwise. * * Note that the return value of this function can only be trusted if it is

From: Srinivas Kandagatla srinivas.kandagatla@linaro.org

commit 4739d88ad8e1900f809f8a5c98f3c1b65bf76220 upstream.

msm_routing_put_audio_mixer() can return incorrect value in various scenarios.

scenario 1: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0

return value is 0 instead of 1 eventhough value was changed

scenario 2: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1

return value is 1 instead of 0 eventhough the value was not changed

scenario 3: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0 return value is 1 instead of 0 eventhough the value was not changed

Fix this by adding checks, so that change notifications are sent correctly.

Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.o... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/qcom/qdsp6/q6routing.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -492,14 +492,16 @@ static int msm_routing_put_audio_mixer(s struct session_data *session = &data->sessions[session_id];

if (ucontrol->value.integer.value[0]) { + if (session->port_id == be_id) + return 0; + session->port_id = be_id; snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update); } else { - if (session->port_id == be_id) { - session->port_id = -1; + if (session->port_id == -1 || session->port_id != be_id) return 0; - }

+ session->port_id = -1; snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update); }

From: Srinivas Kandagatla srinivas.kandagatla@linaro.org

commit 23ba28616d3063bd4c4953598ed5e439ca891101 upstream.

Currently each channel is added as list to dai channel list, however there is danger of adding same channel to multiple dai channel list which endups corrupting the other list where its already added.

This patch ensures that the channel is actually free before adding to the dai channel list and also ensures that the channel is on the list before deleting it.

This check was missing previously, and we did not hit this issue as we were testing very simple usecases with sequence of amixer commands.

Fixes: a70d9245759a ("ASoC: wcd934x: add capture dapm widgets") Fixes: dd9eb19b5673 ("ASoC: wcd934x: add playback dapm widgets") Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20211130160507.22180-2-srinivas.kandagatla@linaro.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/codecs/wcd934x.c | 119 +++++++++++++++++++++++++++++++++------------ 1 file changed, 88 insertions(+), 31 deletions(-)

--- a/sound/soc/codecs/wcd934x.c +++ b/sound/soc/codecs/wcd934x.c @@ -3326,6 +3326,31 @@ static int slim_rx_mux_get(struct snd_kc return 0; }

+static int slim_rx_mux_to_dai_id(int mux) +{ + int aif_id; + + switch (mux) { + case 1: + aif_id = AIF1_PB; + break; + case 2: + aif_id = AIF2_PB; + break; + case 3: + aif_id = AIF3_PB; + break; + case 4: + aif_id = AIF4_PB; + break; + default: + aif_id = -1; + break; + } + + return aif_id; +} + static int slim_rx_mux_put(struct snd_kcontrol *kc, struct snd_ctl_elem_value *ucontrol) { @@ -3333,43 +3358,59 @@ static int slim_rx_mux_put(struct snd_kc struct wcd934x_codec *wcd = dev_get_drvdata(w->dapm->dev); struct soc_enum *e = (struct soc_enum *)kc->private_value; struct snd_soc_dapm_update *update = NULL; + struct wcd934x_slim_ch *ch, *c; u32 port_id = w->shift; + bool found = false; + int mux_idx; + int prev_mux_idx = wcd->rx_port_value[port_id]; + int aif_id;

- if (wcd->rx_port_value[port_id] == ucontrol->value.enumerated.item[0]) - return 0; + mux_idx = ucontrol->value.enumerated.item[0];

- wcd->rx_port_value[port_id] = ucontrol->value.enumerated.item[0]; + if (mux_idx == prev_mux_idx) + return 0;

- switch (wcd->rx_port_value[port_id]) { + switch(mux_idx) { case 0: - list_del_init(&wcd->rx_chs[port_id].list); - break; - case 1: - list_add_tail(&wcd->rx_chs[port_id].list, - &wcd->dai[AIF1_PB].slim_ch_list); - break; - case 2: - list_add_tail(&wcd->rx_chs[port_id].list, - &wcd->dai[AIF2_PB].slim_ch_list); - break; - case 3: - list_add_tail(&wcd->rx_chs[port_id].list, - &wcd->dai[AIF3_PB].slim_ch_list); + aif_id = slim_rx_mux_to_dai_id(prev_mux_idx); + if (aif_id < 0) + return 0; + + list_for_each_entry_safe(ch, c, &wcd->dai[aif_id].slim_ch_list, list) { + if (ch->port == port_id + WCD934X_RX_START) { + found = true; + list_del_init(&ch->list); + break; + } + } + if (!found) + return 0; + break; - case 4: - list_add_tail(&wcd->rx_chs[port_id].list, - &wcd->dai[AIF4_PB].slim_ch_list); + case 1 ... 4: + aif_id = slim_rx_mux_to_dai_id(mux_idx); + if (aif_id < 0) + return 0; + + if (list_empty(&wcd->rx_chs[port_id].list)) { + list_add_tail(&wcd->rx_chs[port_id].list, + &wcd->dai[aif_id].slim_ch_list); + } else { + dev_err(wcd->dev ,"SLIM_RX%d PORT is busy\n", port_id); + return 0; + } break; + default: - dev_err(wcd->dev, "Unknown AIF %d\n", - wcd->rx_port_value[port_id]); + dev_err(wcd->dev, "Unknown AIF %d\n", mux_idx); goto err; }

+ wcd->rx_port_value[port_id] = mux_idx; snd_soc_dapm_mux_update_power(w->dapm, kc, wcd->rx_port_value[port_id], e, update);

- return 0; + return 1; err: return -EINVAL; } @@ -3815,6 +3856,7 @@ static int slim_tx_mixer_put(struct snd_ struct soc_mixer_control *mixer = (struct soc_mixer_control *)kc->private_value; int enable = ucontrol->value.integer.value[0]; + struct wcd934x_slim_ch *ch, *c; int dai_id = widget->shift; int port_id = mixer->shift;

@@ -3822,17 +3864,32 @@ static int slim_tx_mixer_put(struct snd_ if (enable == wcd->tx_port_value[port_id]) return 0;

- wcd->tx_port_value[port_id] = enable; - - if (enable) - list_add_tail(&wcd->tx_chs[port_id].list, - &wcd->dai[dai_id].slim_ch_list); - else - list_del_init(&wcd->tx_chs[port_id].list); + if (enable) { + if (list_empty(&wcd->tx_chs[port_id].list)) { + list_add_tail(&wcd->tx_chs[port_id].list, + &wcd->dai[dai_id].slim_ch_list); + } else { + dev_err(wcd->dev ,"SLIM_TX%d PORT is busy\n", port_id); + return 0; + } + } else { + bool found = false; + + list_for_each_entry_safe(ch, c, &wcd->dai[dai_id].slim_ch_list, list) { + if (ch->port == port_id) { + found = true; + list_del_init(&wcd->tx_chs[port_id].list); + break; + } + } + if (!found) + return 0; + }

+ wcd->tx_port_value[port_id] = enable; snd_soc_dapm_mixer_update_power(widget->dapm, kc, enable, update);

- return 0; + return 1; }

static const struct snd_kcontrol_new aif1_slim_cap_mixer[] = {

From: Yangyang Li liyangyang20@huawei.com

commit 52414e27d6b568120b087d1fbafbb4482b0ccaab upstream.

is_reset is used to indicate whether the hardware starts to reset. When hns_roce_hw_v2_reset_notify_down() is called, the hardware has not yet started to reset. If is_reset is set at this time, all mailbox operations of resource destroy actions will be intercepted by driver. When the driver cleans up resources, but the hardware is still accessed, the following errors will appear:

arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010 arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000003f arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0800 arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010 arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043e arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0800 arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010 arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000020880000436 arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0880 arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010 arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043a arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0840 hns3 0000:35:00.0: INT status: CMDQ(0x0) HW errors(0x0) other(0x0) arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 hns3 0000:35:00.0: received unknown or unhandled event of vector0 arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010 {34}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7

is_reset will be set correctly in check_aedev_reset_status(), so the setting in hns_roce_hw_v2_reset_notify_down() should be deleted.

Fixes: 726be12f5ca0 ("RDMA/hns: Set reset flag when hw resetting") Link: https://lore.kernel.org/r/20211123084809.37318-1-liangwenpeng@huawei.com Signed-off-by: Yangyang Li liyangyang20@huawei.com Signed-off-by: Wenpeng Liang liangwenpeng@huawei.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 -- 1 file changed, 2 deletions(-)

--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -6397,10 +6397,8 @@ static int hns_roce_hw_v2_reset_notify_d if (!hr_dev) return 0;

- hr_dev->is_reset = true; hr_dev->active = false; hr_dev->dis_db = true; - hr_dev->state = HNS_ROCE_DEVICE_STATE_RST_DOWN;

return 0;

From: Armin Wolf W_Armin@gmx.de

commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream.

The removal function is called regardless of whether /proc/i8k was created successfully or not, the later causing a WARN() on module removal. Fix that by only registering the removal function if /proc/i8k was created successfully.

Tested on a Inspiron 3505.

Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") Signed-off-by: Armin Wolf W_Armin@gmx.de Acked-by: Pali Rohár pali@kernel.org Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hwmon/dell-smm-hwmon.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -623,10 +623,9 @@ static void __init i8k_init_procfs(struc { struct dell_smm_data *data = dev_get_drvdata(dev);

- /* Register the proc entry */ - proc_create_data("i8k", 0, NULL, &i8k_proc_ops, data); - - devm_add_action_or_reset(dev, i8k_exit_procfs, NULL); + /* Only register exit function if creation was successful */ + if (proc_create_data("i8k", 0, NULL, &i8k_proc_ops, data)) + devm_add_action_or_reset(dev, i8k_exit_procfs, NULL); }

#else

From: Bjorn Andersson bjorn.andersson@linaro.org

commit a1f0019c342bd83240b05be68c9888549dde7935 upstream.

In the event that the bootloader has configured the Trion PLL as source for the display clocks, e.g. for the continuous splashscreen, then there will also be RCGs that are clocked by this instance.

Reconfiguring, and in particular disabling the output of, the PLL will cause issues for these downstream RCGs and has been shown to prevent them from being re-parented.

Follow downstream and skip configuration if it's determined that the PLL is already running.

Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs") Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Reviewed-by: Robert Foss robert.foss@linaro.org Reviewed-by: Vinod Koul vkoul@kernel.org Link: https://lore.kernel.org/r/20211123162508.153711-1-bjorn.andersson@linaro.org Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/clk/qcom/clk-alpha-pll.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -1429,6 +1429,15 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, const struct alpha_pll_config *config) { + /* + * If the bootloader left the PLL enabled it's likely that there are + * RCGs that will lock up if we disable the PLL below. + */ + if (trion_pll_is_enabled(pll, regmap)) { + pr_debug("Trion PLL is already enabled, skipping configuration\n"); + return; + } + clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l); regmap_write(regmap, PLL_CAL_L_VAL(pll), TRION_PLL_CAL_VAL); clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);

From: Mateusz Palczewski mateusz.palczewski@intel.com

commit 8aa55ab422d9d0d825ebfb877702ed661e96e682 upstream.

After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF.

Fixes: e284fc280473 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek grzegorzx.szczurek@intel.com Signed-off-by: Mateusz Palczewski mateusz.palczewski@intel.com Tested-by: Bindushree P Bindushree.p@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 5 ----- 1 file changed, 5 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -3823,11 +3823,6 @@ static int i40e_vc_add_qch_msg(struct i4

/* set this flag only after making sure all inputs are sane */ vf->adq_enabled = true; - /* num_req_queues is set when user changes number of queues via ethtool - * and this causes issue for default VSI(which depends on this variable) - * when ADq is enabled, hence reset it. - */ - vf->num_req_queues = 0;

/* reset the VF in order to allocate resources */ i40e_vc_reset_vf(vf, true);

From: Herve Codina herve.codina@bootlin.com

commit 9472335eaa1452b51dc8e8edaa1a342997cb80c7 upstream.

Under certain circumstances, the timing settings calculated by the FSMC NAND controller driver were inaccurate. These settings led to incorrect data reads or fallback to timing mode 0 depending on the NAND chip used.

The timing computation did not take into account the following constraint given in SPEAr3xx reference manual: twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL

Enhance the timings calculation by taking into account this additional constraint.

This change has no impact on slow timing modes such as mode 0. Indeed, on mode 0, computed values are the same with and without the patch.

NANDs which previously stayed in mode 0 because of fallback to mode 0 can now work at higher speeds and NANDs which were not working at all because of the corrupted data work at high speeds without troubles.

Overall improvement on a Micron/MT29F1G08 (flash_speed tool): mode0 mode3 eraseblock write speed 3220 KiB/s 4511 KiB/s eraseblock read speed 4491 KiB/s 7529 KiB/s

Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings") Signed-off-by: Herve Codina herve.codina@bootlin.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootli... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mtd/nand/raw/fsmc_nand.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-)

--- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -94,6 +94,14 @@

#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)

+/* + * According to SPEAr300 Reference Manual (RM0082) + * TOUDEL = 7ns (Output delay from the flip-flops to the board) + * TINDEL = 5ns (Input delay from the board to the flipflop) + */ +#define TOUTDEL 7000 +#define TINDEL 5000 + struct fsmc_nand_timings { u8 tclr; u8 tar; @@ -278,7 +286,7 @@ static int fsmc_calc_timings(struct fsmc { unsigned long hclk = clk_get_rate(host->clk); unsigned long hclkn = NSEC_PER_SEC / hclk; - u32 thiz, thold, twait, tset; + u32 thiz, thold, twait, tset, twait_min;

if (sdrt->tRC_min < 30000) return -EOPNOTSUPP; @@ -310,13 +318,6 @@ static int fsmc_calc_timings(struct fsmc else if (tims->thold > FSMC_THOLD_MASK) tims->thold = FSMC_THOLD_MASK;

- twait = max(sdrt->tRP_min, sdrt->tWP_min); - tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1; - if (tims->twait == 0) - tims->twait = 1; - else if (tims->twait > FSMC_TWAIT_MASK) - tims->twait = FSMC_TWAIT_MASK; - tset = max(sdrt->tCS_min - sdrt->tWP_min, sdrt->tCEA_max - sdrt->tREA_max); tims->tset = DIV_ROUND_UP(tset / 1000, hclkn) - 1; @@ -325,6 +326,21 @@ static int fsmc_calc_timings(struct fsmc else if (tims->tset > FSMC_TSET_MASK) tims->tset = FSMC_TSET_MASK;

+ /* + * According to SPEAr300 Reference Manual (RM0082) which gives more + * information related to FSMSC timings than the SPEAr600 one (RM0305), + * twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL + */ + twait_min = sdrt->tCEA_max - ((tims->tset + 1) * hclkn * 1000) + + TOUTDEL + TINDEL; + twait = max3(sdrt->tRP_min, sdrt->tWP_min, twait_min); + + tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1; + if (tims->twait == 0) + tims->twait = 1; + else if (tims->twait > FSMC_TWAIT_MASK) + tims->twait = FSMC_TWAIT_MASK; + return 0; }

From: Norbert Zulinski norbertx.zulinski@intel.com

commit 23ec111bf3549aae37140330c31a16abfc172421 upstream.

When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors.

Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Sylwester Dziedziuch sylwesterx.dziedziuch@intel.com Signed-off-by: Norbert Zulinski norbertx.zulinski@intel.com Signed-off-by: Mateusz Palczewski mateusz.palczewski@intel.com Tested-by: Gurucharan G gurucharanx.g@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -553,6 +553,14 @@ static void i40e_dbg_dump_desc(int cnt, dev_info(&pf->pdev->dev, "vsi %d not found\n", vsi_seid); return; } + if (vsi->type != I40E_VSI_MAIN && + vsi->type != I40E_VSI_FDIR && + vsi->type != I40E_VSI_VMDQ2) { + dev_info(&pf->pdev->dev, + "vsi %d type %d descriptor rings not available\n", + vsi_seid, vsi->type); + return; + } if (type == RING_TYPE_XDP && !i40e_enabled_xdp_vsi(vsi)) { dev_info(&pf->pdev->dev, "XDP not enabled on VSI %d\n", vsi_seid); return;

From: Nicholas Kazlauskas nicholas.kazlauskas@amd.com

commit af6902ec415655236adea91826bd96ed0ab16f42 upstream.

[Why] The HW interrupt gets disabled after S3/S4/reset so we don't receive notifications for HPD or AUX from DMUB - leading to timeout and black screen with (or without) DPIA links connected.

[How] Re-enable the interrupt after S3/S4/reset like we do for the other DC interrupts.

Guard both instances of the outbox interrupt enable or we'll hang during restore on ASIC that don't support it.

Fixes: 6eff272dbee7ad ("drm/amd/display: Fix DPIA outbox timeout after GPU reset")

Reviewed-by: Jude Shih Jude.Shih@amd.com Acked-by: Pavle Kotarac Pavle.Kotarac@amd.com Signed-off-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2213,7 +2213,8 @@ static int dm_resume(void *handle) if (amdgpu_in_reset(adev)) { dc_state = dm->cached_dc_state;

- amdgpu_dm_outbox_init(adev); + if (dc_enable_dmub_notifications(adev->dm.dc)) + amdgpu_dm_outbox_init(adev);

r = dm_dmub_hw_init(adev); if (r) @@ -2262,6 +2263,10 @@ static int dm_resume(void *handle) /* TODO: Remove dc_state->dccg, use dc->dccg directly. */ dc_resource_state_construct(dm->dc, dm_state->context);

+ /* Re-enable outbox interrupts for DPIA. */ + if (dc_enable_dmub_notifications(adev->dm.dc)) + amdgpu_dm_outbox_init(adev); + /* Before powering on DC we need to re-initialize DMUB. */ r = dm_dmub_hw_init(adev); if (r)

From: Sebastian Andrzej Siewior bigeasy@linutronix.de

commit 6a631c0432dcccbcf45839016a07c015e335e9ae upstream.

The initial implementation of migrate_disable() for mainline was a wrapper around preempt_disable(). RT kernels substituted this with a real migrate disable implementation.

Later on mainline gained true migrate disable support, but the documentation was not updated.

Update the documentation, remove the claims about migrate_disable() mapping to preempt_disable() on non-PREEMPT_RT kernels.

Fixes: 74d862b682f51 ("sched: Make migrate_disable/enable() independent of RT") Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20211127163200.10466-2-bigeasy@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/locking/locktypes.rst | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/Documentation/locking/locktypes.rst +++ b/Documentation/locking/locktypes.rst @@ -439,11 +439,9 @@ preemption. The following substitution w spin_lock(&p->lock); p->count += this_cpu_read(var2);

-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable() -which makes the above code fully equivalent. On a PREEMPT_RT kernel migrate_disable() ensures that the task is pinned on the current CPU which in turn guarantees that the per-CPU access to var1 and var2 are staying on -the same CPU. +the same CPU while the task remains preemptible.

The migrate_disable() substitution is not valid for the following scenario:: @@ -456,9 +454,8 @@ scenario:: p = this_cpu_ptr(&var1); p->val = func2();

-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because -here migrate_disable() does not protect against reentrancy from a -preempting task. A correct substitution for this case is:: +This breaks because migrate_disable() does not protect against reentrancy from +a preempting task. A correct substitution for this case is::

func() {

From: Arnaldo Carvalho de Melo acme@redhat.com

commit 3d1d57debee2d342a47615707588b96658fabb85 upstream.

Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check:

$ find tools/ -type f | xargs grep feature-libpython-version $

The only place where this was used was removed in 66dfdff03d196e51:

- ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif

And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it.

But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed:

$ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $

As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case.

With this:

$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep

Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $

Reviewed-by: James Clark james.clark@arm.com Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support") Cc: Adrian Hunter adrian.hunter@intel.com Cc: Ian Rogers irogers@google.com Cc: Jaroslav Škarvada jskarvad@redhat.com Cc: Jiri Olsa jolsa@kernel.org Cc: Namhyung Kim namhyung@kernel.org Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/build/Makefile.feature | 1 - tools/build/feature/Makefile | 4 ---- tools/build/feature/test-all.c | 5 ----- tools/build/feature/test-libpython-version.c | 11 ----------- tools/perf/Makefile.config | 2 -- 5 files changed, 23 deletions(-) delete mode 100644 tools/build/feature/test-libpython-version.c

--- a/tools/build/Makefile.feature +++ b/tools/build/Makefile.feature @@ -48,7 +48,6 @@ FEATURE_TESTS_BASIC := numa_num_possible_cpus \ libperl \ libpython \ - libpython-version \ libslang \ libslang-include-subdir \ libtraceevent \ --- a/tools/build/feature/Makefile +++ b/tools/build/feature/Makefile @@ -32,7 +32,6 @@ FILES= test-numa_num_possible_cpus.bin \ test-libperl.bin \ test-libpython.bin \ - test-libpython-version.bin \ test-libslang.bin \ test-libslang-include-subdir.bin \ test-libtraceevent.bin \ @@ -223,9 +222,6 @@ $(OUTPUT)test-libperl.bin: $(OUTPUT)test-libpython.bin: $(BUILD) $(FLAGS_PYTHON_EMBED)

-$(OUTPUT)test-libpython-version.bin: - $(BUILD) - $(OUTPUT)test-libbfd.bin: $(BUILD) -DPACKAGE='"perf"' -lbfd -ldl

--- a/tools/build/feature/test-all.c +++ b/tools/build/feature/test-all.c @@ -14,10 +14,6 @@ # include "test-libpython.c" #undef main

-#define main main_test_libpython_version -# include "test-libpython-version.c" -#undef main - #define main main_test_libperl # include "test-libperl.c" #undef main @@ -177,7 +173,6 @@ int main(int argc, char *argv[]) { main_test_libpython(); - main_test_libpython_version(); main_test_libperl(); main_test_hello(); main_test_libelf(); --- a/tools/build/feature/test-libpython-version.c +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <Python.h> - -#if PY_VERSION_HEX >= 0x03000000 - #error -#endif - -int main(void) -{ - return 0; -} --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -271,8 +271,6 @@ endif

FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS) FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS) -FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS) -FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS)

FEATURE_CHECK_LDFLAGS-libaio = -lrt

From: Dan Carpenter dan.carpenter@oracle.com

commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream.

There are two error paths which accidentally return success instead of a negative error code.

Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/altera/altera_tse_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -1430,16 +1430,19 @@ static int altera_tse_probe(struct platf priv->rxdescmem_busaddr = dma_res->start;

} else { + ret = -ENODEV; goto err_free_netdev; }

- if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask))) + if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask))) { dma_set_coherent_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask)); - else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32))) + } else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32))) { dma_set_coherent_mask(priv->device, DMA_BIT_MASK(32)); - else + } else { + ret = -EIO; goto err_free_netdev; + }

/* MAC address space */ ret = request_and_map(pdev, "control_port", &control_port,

From: Eric Dumazet edumazet@google.com

commit e195e9b5dee6459d8c8e6a314cc71a644a0537fd upstream.

Commit 2c611ad97a82 ("net, neigh: Extend neigh->flags to 32 bit to allow for extensions") enables a new KMSAM warning [1]

I think the bug is actually older, because the following intruction only occurred if ndm->ndm_flags had NTF_PROXY set.

pn->flags = ndm->ndm_flags;

Let's clear all pneigh_entry fields at alloc time.

[1] BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593 pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593 pneigh_dump_table net/core/neighbour.c:2715 [inline] neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832 netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265 __netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:254 [inline] rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534 netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_write_iter+0x594/0x690 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] __kmalloc+0xc3c/0x12d0 mm/slub.c:4437 kmalloc include/linux/slab.h:595 [inline] pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766 arp_req_set_public net/ipv4/arp.c:1016 [inline] arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032 arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232 inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947 sock_do_ioctl net/socket.c:1118 [inline] sock_ioctl+0xa3f/0x13e0 net/socket.c:1235 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860 __x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae

CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Roopa Prabhu roopa@nvidia.com Reviewed-by: David Ahern dsahern@kernel.org Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/neighbour.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -733,11 +733,10 @@ struct pneigh_entry * pneigh_lookup(stru

ASSERT_RTNL();

- n = kmalloc(sizeof(*n) + key_len, GFP_KERNEL); + n = kzalloc(sizeof(*n) + key_len, GFP_KERNEL); if (!n) goto out;

- n->protocol = 0; write_pnet(&n->net, net); memcpy(n->key, pkey, key_len); n->dev = dev;

From: Peilin Ye peilin.ye@bytedance.com

commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.

Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are failing. ping sockets are bound to dummy1 using the "-I" option (SO_BINDTODEVICE), but socket lookup is failing when receiving ping replies, since the routing table thinks they belong to dummy0.

For example, suppose ping is using a SOCK_RAW socket for ICMP messages. When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the raw_sk_bound_dev_eq() check fails. Similar things happen in ping_lookup() for SOCK_DGRAM sockets.

These tests used to pass due to a bug [1] in iputils, where "ping -I" actually did not bind ICMP message sockets to device. The bug has been fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket to the specific device") in 2016, which is why our rp_filter tests started to fail. See [2] .

Fixing the tests while keeping everything in one netns turns out to be nontrivial. Rework the tests and build the following topology:

┌─────────────────────────────┐ ┌─────────────────────────────┐ │ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │ │ │ │ │ │ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │ │ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │ │ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │ │ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │ │ └────────────┘ │ │ └────────────┘ │ └─────────────────────────────┘ └─────────────────────────────┘

Consider sending an ICMP_ECHO packet A in ns2. Both source and destination IP addresses are 192.0.2.1, and we use strict mode rp_filter in both ns1 and ns2:

1. A is routed to lo since its destination IP address is one of ns2's local addresses (veth2); 2. A is redirected from lo's egress to veth2's egress using mirred; 3. A arrives at veth1's ingress in ns1; 4. A is redirected from veth1's ingress to lo's ingress, again, using mirred; 5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false, since A was received on lo, but reverse path lookup says veth1; 6. However A is not dropped since we have relaxed this check for lo in commit 66f8209547cc ("fib: relax source validation check for loopback packets");

Making sure A is not dropped here in this corner case is the whole point of having this test.

7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is generated; 8. Similarly, B is redirected from lo's egress to veth1's egress (in ns1), then redirected once again from veth2's ingress to lo's ingress (in ns2), using mirred.

Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed check in __fib_validate_source(), but just to make sure the topology works with loopback addresses.

Tested with ping from iputils 20210722-41-gf9fb573:

$ ./fib_tests.sh -t rp_filter

IPv4 rp_filter tests TEST: rp_filter passes local packets [ OK ] TEST: rp_filter passes loopback packets [ OK ]

[1] https://github.com/iputils/iputils/issues/55 [2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8...

Reported-by: Hangbin Liu liuhangbin@gmail.com Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter") Reviewed-by: Cong Wang cong.wang@bytedance.com Signed-off-by: Peilin Ye peilin.ye@bytedance.com Acked-by: David Ahern dsahern@kernel.org Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/fib_tests.sh | 59 +++++++++++++++++++++++++------ 1 file changed, 49 insertions(+), 10 deletions(-)

--- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -444,24 +444,63 @@ fib_rp_filter_test() setup

set -e + ip netns add ns2 + ip netns set ns2 auto + + ip -netns ns2 link set dev lo up + + $IP link add name veth1 type veth peer name veth2 + $IP link set dev veth2 netns ns2 + $IP address add 192.0.2.1/24 dev veth1 + ip -netns ns2 address add 192.0.2.1/24 dev veth2 + $IP link set dev veth1 up + ip -netns ns2 link set dev veth2 up + $IP link set dev lo address 52:54:00:6a:c7:5e - $IP link set dummy0 address 52:54:00:6a:c7:5e - $IP link add dummy1 type dummy - $IP link set dummy1 address 52:54:00:6a:c7:5e - $IP link set dev dummy1 up + $IP link set dev veth1 address 52:54:00:6a:c7:5e + ip -netns ns2 link set dev lo address 52:54:00:6a:c7:5e + ip -netns ns2 link set dev veth2 address 52:54:00:6a:c7:5e + + # 1. (ns2) redirect lo's egress to veth2's egress + ip netns exec ns2 tc qdisc add dev lo parent root handle 1: fq_codel + ip netns exec ns2 tc filter add dev lo parent 1: protocol arp basic \ + action mirred egress redirect dev veth2 + ip netns exec ns2 tc filter add dev lo parent 1: protocol ip basic \ + action mirred egress redirect dev veth2 + + # 2. (ns1) redirect veth1's ingress to lo's ingress + $NS_EXEC tc qdisc add dev veth1 ingress + $NS_EXEC tc filter add dev veth1 ingress protocol arp basic \ + action mirred ingress redirect dev lo + $NS_EXEC tc filter add dev veth1 ingress protocol ip basic \ + action mirred ingress redirect dev lo + + # 3. (ns1) redirect lo's egress to veth1's egress + $NS_EXEC tc qdisc add dev lo parent root handle 1: fq_codel + $NS_EXEC tc filter add dev lo parent 1: protocol arp basic \ + action mirred egress redirect dev veth1 + $NS_EXEC tc filter add dev lo parent 1: protocol ip basic \ + action mirred egress redirect dev veth1 + + # 4. (ns2) redirect veth2's ingress to lo's ingress + ip netns exec ns2 tc qdisc add dev veth2 ingress + ip netns exec ns2 tc filter add dev veth2 ingress protocol arp basic \ + action mirred ingress redirect dev lo + ip netns exec ns2 tc filter add dev veth2 ingress protocol ip basic \ + action mirred ingress redirect dev lo + $NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1 $NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1 $NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1 - - $NS_EXEC tc qd add dev dummy1 parent root handle 1: fq_codel - $NS_EXEC tc filter add dev dummy1 parent 1: protocol arp basic action mirred egress redirect dev lo - $NS_EXEC tc filter add dev dummy1 parent 1: protocol ip basic action mirred egress redirect dev lo + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1 + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.accept_local=1 + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1 set +e

- run_cmd "ip netns exec ns1 ping -I dummy1 -w1 -c1 198.51.100.1" + run_cmd "ip netns exec ns2 ping -w1 -c1 192.0.2.1" log_test $? 0 "rp_filter passes local packets"

- run_cmd "ip netns exec ns1 ping -I dummy1 -w1 -c1 127.0.0.1" + run_cmd "ip netns exec ns2 ping -w1 -c1 127.0.0.1" log_test $? 0 "rp_filter passes loopback packets"

cleanup

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 86ebbc11bb3f60908a51f3e41a17e3f477c2eaa3 upstream.

Under some conditions, USB gadget devices can show allocated buffer contents to a host. Fix this up by zero-allocating them so that any extra data will all just be zeros.

Reported-by: Szymon Heidrich szymon.heidrich@gmail.com Tested-by: Szymon Heidrich szymon.heidrich@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/composite.c | 2 +- drivers/usb/gadget/legacy/dbgp.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2221,7 +2221,7 @@ int composite_dev_prepare(struct usb_com if (!cdev->req) return -ENOMEM;

- cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); + cdev->req->buf = kzalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); if (!cdev->req->buf) goto fail;

--- a/drivers/usb/gadget/legacy/dbgp.c +++ b/drivers/usb/gadget/legacy/dbgp.c @@ -137,7 +137,7 @@ static int dbgp_enable_ep_req(struct usb goto fail_1; }

- req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL); + req->buf = kzalloc(DBGP_REQ_LEN, GFP_KERNEL); if (!req->buf) { err = -ENOMEM; stp = 2;

From: Pavel Hofman pavel.hofman@ivitera.com

commit 1a3910c80966e4a76b25ce812f6bea0ef1b1d530 upstream.

The checks performed by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") require that initial value of the maxp variable contains both maximum packet size bits (10..0) and multiple-transactions bits (12..11). However, the existing code assings only the maximum packet size bits. This patch assigns all bits of wMaxPacketSize to the variable.

Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable stable@vger.kernel.org Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Pavel Hofman pavel.hofman@ivitera.com Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -406,7 +406,7 @@ static int usb_parse_endpoint(struct dev * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0 * (see the end of section 5.6.3), so don't warn about them. */ - maxp = usb_endpoint_maxp(&endpoint->desc); + maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize); if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) { dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n", cfgno, inum, asnum, d->bEndpointAddress);

From: Pavel Hofman pavel.hofman@ivitera.com

commit ca5737396927afd4d57b133fd2874bbcf3421cdb upstream.

Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for extracting multiple-transactions bits from wMaxPacketSize value.

Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Pavel Hofman pavel.hofman@ivitera.com Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/config.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -422,9 +422,9 @@ static int usb_parse_endpoint(struct dev maxpacket_maxes = full_speed_maxpacket_maxes; break; case USB_SPEED_HIGH: - /* Bits 12..11 are allowed only for HS periodic endpoints */ + /* Multiple-transactions bits are allowed only for HS periodic endpoints */ if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { - i = maxp & (BIT(12) | BIT(11)); + i = maxp & USB_EP_MAXP_MULT_MASK; maxp &= ~i; } fallthrough;

From: Kister Genesis Jimenez kister.jimenez@analog.com

commit fde272e78e004a45c7e4976876277d7e6a5a0ede upstream.

Properly sign-extend the rate and temperature data.

Fixes: 2c8920fff1457 ("iio: gyro: Add driver support for ADXRS290") Signed-off-by: Kister Genesis Jimenez kister.jimenez@analog.com Signed-off-by: Nuno Sá nuno.sa@analog.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20211115104147.18669-1-nuno.sa@analog.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/gyro/adxrs290.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/iio/gyro/adxrs290.c +++ b/drivers/iio/gyro/adxrs290.c @@ -7,6 +7,7 @@ */

#include <linux/bitfield.h> +#include <linux/bitops.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/kernel.h> @@ -124,7 +125,7 @@ static int adxrs290_get_rate_data(struct goto err_unlock; }

- *val = temp; + *val = sign_extend32(temp, 15);

err_unlock: mutex_unlock(&st->lock); @@ -146,7 +147,7 @@ static int adxrs290_get_temp_data(struct }

/* extract lower 12 bits temperature reading */ - *val = temp & 0x0FFF; + *val = sign_extend32(temp, 11);

err_unlock: mutex_unlock(&st->lock);

From: Alyssa Ross hi@alyssa.is

commit 893621e0606747c5bbefcaf2794d12c7aa6212b7 upstream.

modprobe can't handle spaces in aliases.

Fixes: 93fbe91b5521 ("iio: Add STM32 timer trigger driver") Signed-off-by: Alyssa Ross hi@alyssa.is Link: https://lore.kernel.org/r/20211125182850.2645424-1-hi@alyssa.is Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/trigger/stm32-timer-trigger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -912,6 +912,6 @@ static struct platform_driver stm32_time }; module_platform_driver(stm32_timer_trigger_driver);

-MODULE_ALIAS("platform: stm32-timer-trigger"); +MODULE_ALIAS("platform:stm32-timer-trigger"); MODULE_DESCRIPTION("STMicroelectronics STM32 Timer Trigger driver"); MODULE_LICENSE("GPL v2");

From: Lars-Peter Clausen lars@metafoo.de

commit cd0082235783f814241a1c9483fb89e405f4f892 upstream.

The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1.

Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs.

Fix this by getting a reference to the trigger before assigning it to the IIO device.

Fixes: ae6d9ce05691 ("iio: mma8452: Add support for interrupt driven triggers.") Signed-off-by: Lars-Peter Clausen lars@metafoo.de Link: https://lore.kernel.org/r/20211024092700.6844-1-lars@metafoo.de Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/mma8452.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1470,7 +1470,7 @@ static int mma8452_trigger_setup(struct if (ret) return ret;

- indio_dev->trig = trig; + indio_dev->trig = iio_trigger_get(trig);

return 0; }

From: Lars-Peter Clausen lars@metafoo.de

commit 45febe0d63917ee908198c5be08511c64ee1790a upstream.

IIO trigger handlers need to return one of the irqreturn_t values. Returning an error code is not supported.

The kxsd9 interrupt handler returns an error code if reading the data registers fails. In addition when exiting due to an error the trigger handler does not call `iio_trigger_notify_done()`. Which when not done keeps the triggered disabled forever.

Modify the code so that the function returns a valid irqreturn_t value as well as calling `iio_trigger_notify_done()` on all exit paths.

Since we can't return the error code make sure to at least log it as part of the error message.

Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling") Signed-off-by: Lars-Peter Clausen lars@metafoo.de Reviewed-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20211024171251.22896-2-lars@metafoo.de Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/kxsd9.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -224,14 +224,14 @@ static irqreturn_t kxsd9_trigger_handler hw_values.chan, sizeof(hw_values.chan)); if (ret) { - dev_err(st->dev, - "error reading data\n"); - return ret; + dev_err(st->dev, "error reading data: %d\n", ret); + goto out; }

iio_push_to_buffers_with_timestamp(indio_dev, &hw_values, iio_get_time_ns(indio_dev)); +out: iio_trigger_notify_done(indio_dev->trig);

return IRQ_HANDLED;

From: Noralf Trønnes noralf@tronnes.org

commit 59f92868176f191eefde70d284bdfc1ed76a84bc upstream.

When reading the voltage:

$ cat /sys/bus/iio/devices/iio:device0/in_voltage0_raw

Lockdep complains:

[ 153.910616] ====================================================== [ 153.916918] WARNING: possible circular locking dependency detected [ 153.923221] 5.14.0+ #5 Not tainted [ 153.926692] ------------------------------------------------------ [ 153.932992] cat/717 is trying to acquire lock: [ 153.937525] c2585358 (&indio_dev->mlock){+.+.}-{3:3}, at: iio_device_claim_direct_mode+0x28/0x44 [ 153.946541] but task is already holding lock: [ 153.952487] c2585860 (&dln2->mutex){+.+.}-{3:3}, at: dln2_adc_read_raw+0x94/0x2bc [dln2_adc] [ 153.961152] which lock already depends on the new lock.

Fix this by not calling into the iio core underneath the dln2->mutex lock.

Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC") Cc: Jack Andersen jackoalan@gmail.com Signed-off-by: Noralf Trønnes noralf@tronnes.org Link: https://lore.kernel.org/r/20211018113731.25723-1-noralf@tronnes.org Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/dln2-adc.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/drivers/iio/adc/dln2-adc.c +++ b/drivers/iio/adc/dln2-adc.c @@ -248,7 +248,6 @@ static int dln2_adc_set_chan_period(stru static int dln2_adc_read(struct dln2_adc *dln2, unsigned int channel) { int ret, i; - struct iio_dev *indio_dev = platform_get_drvdata(dln2->pdev); u16 conflict; __le16 value; int olen = sizeof(value); @@ -257,13 +256,9 @@ static int dln2_adc_read(struct dln2_adc .chan = channel, };

- ret = iio_device_claim_direct_mode(indio_dev); - if (ret < 0) - return ret; - ret = dln2_adc_set_chan_enabled(dln2, channel, true); if (ret < 0) - goto release_direct; + return ret;

ret = dln2_adc_set_port_enabled(dln2, true, &conflict); if (ret < 0) { @@ -300,8 +295,6 @@ disable_port: dln2_adc_set_port_enabled(dln2, false, NULL); disable_chan: dln2_adc_set_chan_enabled(dln2, channel, false); -release_direct: - iio_device_release_direct_mode(indio_dev);

return ret; } @@ -337,10 +330,16 @@ static int dln2_adc_read_raw(struct iio_

switch (mask) { case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret < 0) + return ret; + mutex_lock(&dln2->mutex); ret = dln2_adc_read(dln2, chan->channel); mutex_unlock(&dln2->mutex);

+ iio_device_release_direct_mode(indio_dev); + if (ret < 0) return ret;

From: Gwendal Grignou gwendal@chromium.org

commit 652e7df485c6884d552085ae2c73efa6cfea3547 upstream.

Use scan_type when processing raw data which also fixes that the sign extension was from the wrong bit.

Use channel definition as root of trust and replace constant when reading elements directly using the raw sysfs attributes.

Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Gwendal Grignou gwendal@chromium.org Reviewed-by: Eugen Hristev eugen.hristev@microchip.com Cc: Stable@vger.kernel.org Link: https://lore.kernel.org/r/20211104082413.3681212-9-gwendal@chromium.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/at91-sama5d2_adc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -1377,7 +1377,8 @@ static int at91_adc_read_info_raw(struct *val = st->conversion_value; ret = at91_adc_adjust_val_osr(st, val); if (chan->scan_type.sign == 's') - *val = sign_extend32(*val, 11); + *val = sign_extend32(*val, + chan->scan_type.realbits - 1); st->conversion_done = false; }

From: Evgeny Boger boger@wirenboard.com

commit 92beafb76a31bdc02649eb44e93a8e4f4cfcdbe8 upstream.

Both the charging and discharging currents on AXP22x are stored as 12-bit integers, in accordance with the datasheet. It's also confirmed by vendor BSP (axp20x_adc.c:axp22_icharge_to_mA).

The scale factor of 0.5 is never mentioned in datasheet, nor in the vendor source code. I think it was here to compensate for erroneous addition bit in register width.

Tested on custom A40i+AXP221s board with external ammeter as a reference.

Fixes: 0e34d5de961d ("iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs") Signed-off-by: Evgeny Boger boger@wirenboard.com Acked-by: Chen-Yu Tsai wens@csie.org Link: https://lore.kernel.org/r/20211116213746.264378-1-boger@wirenboard.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/axp20x_adc.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-)

--- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c @@ -251,19 +251,8 @@ static int axp22x_adc_raw(struct iio_dev struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); - int size;

- /* - * N.B.: Unlike the Chinese datasheets tell, the charging current is - * stored on 12 bits, not 13 bits. Only discharging current is on 13 - * bits. - */ - if (chan->type == IIO_CURRENT && chan->channel == AXP22X_BATT_DISCHRG_I) - size = 13; - else - size = 12; - - *val = axp20x_read_variable_width(info->regmap, chan->address, size); + *val = axp20x_read_variable_width(info->regmap, chan->address, 12); if (*val < 0) return *val;

@@ -386,9 +375,8 @@ static int axp22x_adc_scale(struct iio_c return IIO_VAL_INT_PLUS_MICRO;

case IIO_CURRENT: - *val = 0; - *val2 = 500000; - return IIO_VAL_INT_PLUS_MICRO; + *val = 1; + return IIO_VAL_INT;

case IIO_TEMP: *val = 100;

From: Yang Yingliang yangyingliang@huawei.com

commit 70c9774e180d151abaab358108e3510a8e615215 upstream.

When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows:

unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013]

Fix it by remove data->dready_trig condition in probe and remove.

Reported-by: Hulk Robot hulkci@huawei.com Fixes: a25691c1f967 ("iio: accel: kxcjk1013: allow using an external trigger") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Cc: Stable@vger.kernel.org Reviewed-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20211025124159.2700301-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/kxcjk-1013.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1595,8 +1595,7 @@ static int kxcjk1013_probe(struct i2c_cl return 0;

err_buffer_cleanup: - if (data->dready_trig) - iio_triggered_buffer_cleanup(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); err_trigger_unregister: if (data->dready_trig) iio_trigger_unregister(data->dready_trig); @@ -1618,8 +1617,8 @@ static int kxcjk1013_remove(struct i2c_c pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev);

+ iio_triggered_buffer_cleanup(indio_dev); if (data->dready_trig) { - iio_triggered_buffer_cleanup(indio_dev); iio_trigger_unregister(data->dready_trig); iio_trigger_unregister(data->motion_trig); }

From: Ralph Siemsen ralph.siemsen@linaro.org

commit 9a626577398c24ecab63c0a684436c8928092367 upstream.

Commit fd307a4ad332 ("nvmem: prepare basics for FRAM support") added support for FRAM devices such as the Cypress FM25V. During testing, it was found that the FRAM detects properly, however reads and writes fail. Upon further investigation, two problem were found in at25_probe() routine.

1) In the case of an FRAM device without platform data, eg. fram == true && spi->dev.platform_data == NULL the stack local variable "struct spi_eeprom chip" is not initialized fully, prior to being copied into at25->chip. The chip.flags field in particular can cause problems.

2) The byte_len of FRAM is computed from its ID register, and is stored into the stack local "struct spi_eeprom chip" structure. This happens after the same structure has been copied into at25->chip. As a result, at25->chip.byte_len does not contain the correct length of the device. In turn this can cause checks at beginning of at25_ee_read() to fail (or equally, it could allow reads beyond the end of the device length).

Fix both of these issues by eliminating the on-stack struct spi_eeprom. Instead use the one inside at25_data structure, which starts of zeroed.

Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support") Cc: stable stable@vger.kernel.org Reviewed-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Ralph Siemsen ralph.siemsen@linaro.org Link: https://lore.kernel.org/r/20211108181627.645638-1-ralph.siemsen@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/misc/eeprom/at25.c | 38 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 20 deletions(-)

--- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -376,7 +376,6 @@ MODULE_DEVICE_TABLE(spi, at25_spi_ids); static int at25_probe(struct spi_device *spi) { struct at25_data *at25 = NULL; - struct spi_eeprom chip; int err; int sr; u8 id[FM25_ID_LEN]; @@ -389,15 +388,18 @@ static int at25_probe(struct spi_device if (match && !strcmp(match->compatible, "cypress,fm25")) is_fram = 1;

+ at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL); + if (!at25) + return -ENOMEM; + /* Chip description */ - if (!spi->dev.platform_data) { - if (!is_fram) { - err = at25_fw_to_chip(&spi->dev, &chip); - if (err) - return err; - } - } else - chip = *(struct spi_eeprom *)spi->dev.platform_data; + if (spi->dev.platform_data) { + memcpy(&at25->chip, spi->dev.platform_data, sizeof(at25->chip)); + } else if (!is_fram) { + err = at25_fw_to_chip(&spi->dev, &at25->chip); + if (err) + return err; + }

/* Ping the chip ... the status register is pretty portable, * unlike probing manufacturer IDs. We do expect that system @@ -409,12 +411,7 @@ static int at25_probe(struct spi_device return -ENXIO; }

- at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL); - if (!at25) - return -ENOMEM; - mutex_init(&at25->lock); - at25->chip = chip; at25->spi = spi; spi_set_drvdata(spi, at25);

@@ -431,7 +428,7 @@ static int at25_probe(struct spi_device dev_err(&spi->dev, "Error: unsupported size (id %02x)\n", id[7]); return -ENODEV; } - chip.byte_len = int_pow(2, id[7] - 0x21 + 4) * 1024; + at25->chip.byte_len = int_pow(2, id[7] - 0x21 + 4) * 1024;

if (at25->chip.byte_len > 64 * 1024) at25->chip.flags |= EE_ADDR3; @@ -464,7 +461,7 @@ static int at25_probe(struct spi_device at25->nvmem_config.type = is_fram ? NVMEM_TYPE_FRAM : NVMEM_TYPE_EEPROM; at25->nvmem_config.name = dev_name(&spi->dev); at25->nvmem_config.dev = &spi->dev; - at25->nvmem_config.read_only = chip.flags & EE_READONLY; + at25->nvmem_config.read_only = at25->chip.flags & EE_READONLY; at25->nvmem_config.root_only = true; at25->nvmem_config.owner = THIS_MODULE; at25->nvmem_config.compat = true; @@ -474,17 +471,18 @@ static int at25_probe(struct spi_device at25->nvmem_config.priv = at25; at25->nvmem_config.stride = 1; at25->nvmem_config.word_size = 1; - at25->nvmem_config.size = chip.byte_len; + at25->nvmem_config.size = at25->chip.byte_len;

at25->nvmem = devm_nvmem_register(&spi->dev, &at25->nvmem_config); if (IS_ERR(at25->nvmem)) return PTR_ERR(at25->nvmem);

dev_info(&spi->dev, "%d %s %s %s%s, pagesize %u\n", - (chip.byte_len < 1024) ? chip.byte_len : (chip.byte_len / 1024), - (chip.byte_len < 1024) ? "Byte" : "KByte", + (at25->chip.byte_len < 1024) ? + at25->chip.byte_len : (at25->chip.byte_len / 1024), + (at25->chip.byte_len < 1024) ? "Byte" : "KByte", at25->chip.name, is_fram ? "fram" : "eeprom", - (chip.flags & EE_READONLY) ? " (readonly)" : "", + (at25->chip.flags & EE_READONLY) ? " (readonly)" : "", at25->chip.page_size); return 0; }

From: Loic Poulain loic.poulain@linaro.org

commit cab2d3fd6866e089b5c50db09dece131f85bfebd upstream.

For whatever reason, some devices like QCA6390, WCN6855 using ath11k are not in M3 state during PM resume, but still functional. The mhi_pm_resume should then not fail in those cases, and let the higher level device specific stack continue resuming process.

Add an API mhi_pm_resume_force(), to force resuming irrespective of the current MHI state. This fixes a regression with non functional ath11k WiFi after suspend/resume cycle on some machines.

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179

Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/ Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state") Cc: stable@vger.kernel.org #5.13 Reported-by: Kalle Valo kvalo@codeaurora.org Reported-by: Pengyu Ma mapengyu@gmail.com Tested-by: Kalle Valo kvalo@kernel.org Acked-by: Kalle Valo kvalo@kernel.org Signed-off-by: Loic Poulain loic.poulain@linaro.org [mani: Switched to API, added bug report, reported-by tags and CCed stable] Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bus/mhi/core/pm.c | 21 ++++++++++++++++++--- drivers/net/wireless/ath/ath11k/mhi.c | 6 +++++- include/linux/mhi.h | 13 +++++++++++++ 3 files changed, 36 insertions(+), 4 deletions(-)

--- a/drivers/bus/mhi/core/pm.c +++ b/drivers/bus/mhi/core/pm.c @@ -881,7 +881,7 @@ int mhi_pm_suspend(struct mhi_controller } EXPORT_SYMBOL_GPL(mhi_pm_suspend);

-int mhi_pm_resume(struct mhi_controller *mhi_cntrl) +static int __mhi_pm_resume(struct mhi_controller *mhi_cntrl, bool force) { struct mhi_chan *itr, *tmp; struct device *dev = &mhi_cntrl->mhi_dev->dev; @@ -898,8 +898,12 @@ int mhi_pm_resume(struct mhi_controller if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) return -EIO;

- if (mhi_get_mhi_state(mhi_cntrl) != MHI_STATE_M3) - return -EINVAL; + if (mhi_get_mhi_state(mhi_cntrl) != MHI_STATE_M3) { + dev_warn(dev, "Resuming from non M3 state (%s)\n", + TO_MHI_STATE_STR(mhi_get_mhi_state(mhi_cntrl))); + if (!force) + return -EINVAL; + }

/* Notify clients about exiting LPM */ list_for_each_entry_safe(itr, tmp, &mhi_cntrl->lpm_chans, node) { @@ -940,8 +944,19 @@ int mhi_pm_resume(struct mhi_controller

return 0; } + +int mhi_pm_resume(struct mhi_controller *mhi_cntrl) +{ + return __mhi_pm_resume(mhi_cntrl, false); +} EXPORT_SYMBOL_GPL(mhi_pm_resume);

+int mhi_pm_resume_force(struct mhi_controller *mhi_cntrl) +{ + return __mhi_pm_resume(mhi_cntrl, true); +} +EXPORT_SYMBOL_GPL(mhi_pm_resume_force); + int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl) { int ret; --- a/drivers/net/wireless/ath/ath11k/mhi.c +++ b/drivers/net/wireless/ath/ath11k/mhi.c @@ -533,7 +533,11 @@ static int ath11k_mhi_set_state(struct a ret = mhi_pm_suspend(ab_pci->mhi_ctrl); break; case ATH11K_MHI_RESUME: - ret = mhi_pm_resume(ab_pci->mhi_ctrl); + /* Do force MHI resume as some devices like QCA6390, WCN6855 + * are not in M3 state but they are functional. So just ignore + * the MHI state while resuming. + */ + ret = mhi_pm_resume_force(ab_pci->mhi_ctrl); break; case ATH11K_MHI_TRIGGER_RDDM: ret = mhi_force_rddm_mode(ab_pci->mhi_ctrl); --- a/include/linux/mhi.h +++ b/include/linux/mhi.h @@ -664,6 +664,19 @@ int mhi_pm_suspend(struct mhi_controller int mhi_pm_resume(struct mhi_controller *mhi_cntrl);

/** + * mhi_pm_resume_force - Force resume MHI from suspended state + * @mhi_cntrl: MHI controller + * + * Resume the device irrespective of its MHI state. As per the MHI spec, devices + * has to be in M3 state during resume. But some devices seem to be in a + * different MHI state other than M3 but they continue working fine if allowed. + * This API is intented to be used for such devices. + * + * Return: 0 if the resume succeeds, a negative error code otherwise + */ +int mhi_pm_resume_force(struct mhi_controller *mhi_cntrl); + +/** * mhi_download_rddm_image - Download ramdump image from device for * debugging purpose. * @mhi_cntrl: MHI controller

From: Billy Tsai billy_tsai@aspeedtech.com

commit 8958389681b929fcc7301e7dc5f0da12e4a256a0 upstream.

The interrupt status bits are cleared by writing 1, we should force a write to clear the interrupt without checking if the value has changed.

Fixes: 04f605906ff0 ("irqchip: Add Aspeed SCU interrupt controller") Signed-off-by: Billy Tsai billy_tsai@aspeedtech.com Reviewed-by: Joel Stanley joel@jms.id.au Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20211124094348.11621-1-billy_tsai@aspeedtech.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-aspeed-scu-ic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/irqchip/irq-aspeed-scu-ic.c +++ b/drivers/irqchip/irq-aspeed-scu-ic.c @@ -76,8 +76,8 @@ static void aspeed_scu_ic_irq_handler(st generic_handle_domain_irq(scu_ic->irq_domain, bit - scu_ic->irq_shift);

- regmap_update_bits(scu_ic->scu, scu_ic->reg, mask, - BIT(bit + ASPEED_SCU_IC_STATUS_SHIFT)); + regmap_write_bits(scu_ic->scu, scu_ic->reg, mask, + BIT(bit + ASPEED_SCU_IC_STATUS_SHIFT)); }

chained_irq_exit(chip, desc);

From: Pali Rohár pali@kernel.org

commit d0a553502efd545c1ce3fd08fc4d423f8e4ac3d6 upstream.

irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into msi_domain_info structure. But allocated interrupt numbers for Multi-MSI needs to be properly aligned otherwise devices send MSI interrupt with wrong number.

Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area() to allocate aligned interrupt numbers.

Signed-off-by: Pali Rohár pali@kernel.org Fixes: a71b9412c90c ("irqchip/armada-370-xp: Allow allocation of multiple MSIs") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-armada-370-xp.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)