From: Dean Luick dean.luick@cornelisnetworks.com
[ Upstream commit 892ede5a77f337831609fb9c248ac60948061894 ]
Fix possible RMT overflow: Use the correct netdev size. Don't allow adjusted user contexts to go negative.
Fix QOS calculation: Send kernel context count as an argument since dd->n_krcv_queues is not yet set up in earliest call. Do not include the control context in the QOS calculation. Use the same sized variable to find the max of krcvq[] entries.
Update the RMT count explanation to make more sense.
Signed-off-by: Dean Luick dean.luick@cornelisnetworks.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@cornelisnetworks.com Link: https://lore.kernel.org/r/167329106946.1472990.18385495251650939054.stgit@aw... Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/chip.c | 59 +++++++++++++++++-------------- 1 file changed, 32 insertions(+), 27 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index b0d587254fe66..689921dc3d4a8 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -1055,7 +1055,7 @@ static void read_link_down_reason(struct hfi1_devdata *dd, u8 *ldr); static void handle_temp_err(struct hfi1_devdata *dd); static void dc_shutdown(struct hfi1_devdata *dd); static void dc_start(struct hfi1_devdata *dd); -static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp, +static int qos_rmt_entries(unsigned int n_krcv_queues, unsigned int *mp, unsigned int *np); static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd); static int wait_link_transfer_active(struct hfi1_devdata *dd, int wait_ms); @@ -13361,7 +13361,6 @@ static int set_up_context_variables(struct hfi1_devdata *dd) int ret; unsigned ngroups; int rmt_count; - int user_rmt_reduced; u32 n_usr_ctxts; u32 send_contexts = chip_send_contexts(dd); u32 rcv_contexts = chip_rcv_contexts(dd); @@ -13420,28 +13419,34 @@ static int set_up_context_variables(struct hfi1_devdata *dd) (num_kernel_contexts + n_usr_ctxts), &node_affinity.real_cpu_mask); /* - * The RMT entries are currently allocated as shown below: - * 1. QOS (0 to 128 entries); - * 2. FECN (num_kernel_context - 1 + num_user_contexts + - * num_netdev_contexts); - * 3. netdev (num_netdev_contexts). - * It should be noted that FECN oversubscribe num_netdev_contexts - * entries of RMT because both netdev and PSM could allocate any receive - * context between dd->first_dyn_alloc_text and dd->num_rcv_contexts, - * and PSM FECN must reserve an RMT entry for each possible PSM receive - * context. + * RMT entries are allocated as follows: + * 1. QOS (0 to 128 entries) + * 2. FECN (num_kernel_context - 1 [a] + num_user_contexts + + * num_netdev_contexts [b]) + * 3. netdev (NUM_NETDEV_MAP_ENTRIES) + * + * Notes: + * [a] Kernel contexts (except control) are included in FECN if kernel + * TID_RDMA is active. + * [b] Netdev and user contexts are randomly allocated from the same + * context pool, so FECN must cover all contexts in the pool. */ - rmt_count = qos_rmt_entries(dd, NULL, NULL) + (num_netdev_contexts * 2); - if (HFI1_CAP_IS_KSET(TID_RDMA)) - rmt_count += num_kernel_contexts - 1; - if (rmt_count + n_usr_ctxts > NUM_MAP_ENTRIES) { - user_rmt_reduced = NUM_MAP_ENTRIES - rmt_count; - dd_dev_err(dd, - "RMT size is reducing the number of user receive contexts from %u to %d\n", - n_usr_ctxts, - user_rmt_reduced); - /* recalculate */ - n_usr_ctxts = user_rmt_reduced; + rmt_count = qos_rmt_entries(num_kernel_contexts - 1, NULL, NULL) + + (HFI1_CAP_IS_KSET(TID_RDMA) ? num_kernel_contexts - 1 + : 0) + + n_usr_ctxts + + num_netdev_contexts + + NUM_NETDEV_MAP_ENTRIES; + if (rmt_count > NUM_MAP_ENTRIES) { + int over = rmt_count - NUM_MAP_ENTRIES; + /* try to squish user contexts, minimum of 1 */ + if (over >= n_usr_ctxts) { + dd_dev_err(dd, "RMT overflow: reduce the requested number of contexts\n"); + return -EINVAL; + } + dd_dev_err(dd, "RMT overflow: reducing # user contexts from %u to %u\n", + n_usr_ctxts, n_usr_ctxts - over); + n_usr_ctxts -= over; }
/* the first N are kernel contexts, the rest are user/netdev contexts */ @@ -14298,15 +14303,15 @@ static void clear_rsm_rule(struct hfi1_devdata *dd, u8 rule_index) }
/* return the number of RSM map table entries that will be used for QOS */ -static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp, +static int qos_rmt_entries(unsigned int n_krcv_queues, unsigned int *mp, unsigned int *np) { int i; unsigned int m, n; - u8 max_by_vl = 0; + uint max_by_vl = 0;
/* is QOS active at all? */ - if (dd->n_krcv_queues <= MIN_KERNEL_KCTXTS || + if (n_krcv_queues < MIN_KERNEL_KCTXTS || num_vls == 1 || krcvqsset <= 1) goto no_qos; @@ -14364,7 +14369,7 @@ static void init_qos(struct hfi1_devdata *dd, struct rsm_map_table *rmt)
if (!rmt) goto bail; - rmt_entries = qos_rmt_entries(dd, &m, &n); + rmt_entries = qos_rmt_entries(dd->n_krcv_queues - 1, &m, &n); if (rmt_entries == 0) goto bail; qpns_per_vl = 1 << m;
From: Vasant Hegde vasant.hegde@amd.com
[ Upstream commit 080920e52148b4fbbf9360d5345fdcd7846e4841 ]
Current code throws kernel warning if it fails to enable pasid/pri [1]. Do not call pci_disable_[pasid/pri] if pci_enable_[pasid/pri] failed.
[1] https://lore.kernel.org/linux-iommu/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@lee...
Reported-by: Matt Fagnani matt.fagnani@bell.net Signed-off-by: Vasant Hegde vasant.hegde@amd.com Reviewed-by: Suravee Suthikulpanit suravee.suthikulpanit@amd.com Link: https://lore.kernel.org/r/20230111121503.5931-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/amd/iommu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index 7154fb551ddc9..5ceaaabb4f9da 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -1586,27 +1586,29 @@ static int pdev_iommuv2_enable(struct pci_dev *pdev) /* Only allow access to user-accessible pages */ ret = pci_enable_pasid(pdev, 0); if (ret) - goto out_err; + return ret;
/* First reset the PRI state of the device */ ret = pci_reset_pri(pdev); if (ret) - goto out_err; + goto out_err_pasid;
/* Enable PRI */ /* FIXME: Hardcode number of outstanding requests for now */ ret = pci_enable_pri(pdev, 32); if (ret) - goto out_err; + goto out_err_pasid;
ret = pci_enable_ats(pdev, PAGE_SHIFT); if (ret) - goto out_err; + goto out_err_pri;
return 0;
-out_err: +out_err_pri: pci_disable_pri(pdev); + +out_err_pasid: pci_disable_pasid(pdev);
return ret;
From: Laurent Pinchart laurent.pinchart@ideasonboard.com
[ Upstream commit 50459f103edfe47c9a599d766a850ef6014936c5 ]
The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(), there's no need to manually set the descriptions in the driver. This prepares for removal of the format descriptions from the uvc_fmts table.
Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV formats. It also indicates whether the DV format uses 50Hz or 60Hz. This information is parsed by the driver to construct a format name string that is printed in a debug message, but serves no other purpose as V4L2 has a single V4L2_PIX_FMT_DV pixel format that covers all those cases.
As the information is available in the UVC descriptors, and thus accessible to users with lsusb if they really care, don't log it in a debug message and drop the format name string to simplify the code.
Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Michael Grzeschik m.grzeschik@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 24 ++---------------------- drivers/media/usb/uvc/uvc_v4l2.c | 2 -- drivers/media/usb/uvc/uvcvideo.h | 2 -- 3 files changed, 2 insertions(+), 26 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 72fff7264b549..7e02b158a8c9d 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -531,14 +531,10 @@ static int uvc_parse_format(struct uvc_device *dev, fmtdesc = uvc_format_by_guid(&buffer[5]);
if (fmtdesc != NULL) { - strscpy(format->name, fmtdesc->name, - sizeof(format->name)); format->fcc = fmtdesc->fcc; } else { dev_info(&streaming->intf->dev, "Unknown video format %pUl\n", &buffer[5]); - snprintf(format->name, sizeof(format->name), "%pUl\n", - &buffer[5]); format->fcc = 0; }
@@ -549,8 +545,6 @@ static int uvc_parse_format(struct uvc_device *dev, */ if (dev->quirks & UVC_QUIRK_FORCE_Y8) { if (format->fcc == V4L2_PIX_FMT_YUYV) { - strscpy(format->name, "Greyscale 8-bit (Y8 )", - sizeof(format->name)); format->fcc = V4L2_PIX_FMT_GREY; format->bpp = 8; width_multiplier = 2; @@ -591,7 +585,6 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }
- strscpy(format->name, "MJPEG", sizeof(format->name)); format->fcc = V4L2_PIX_FMT_MJPEG; format->flags = UVC_FMT_FLAG_COMPRESSED; format->bpp = 0; @@ -607,17 +600,7 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }
- switch (buffer[8] & 0x7f) { - case 0: - strscpy(format->name, "SD-DV", sizeof(format->name)); - break; - case 1: - strscpy(format->name, "SDL-DV", sizeof(format->name)); - break; - case 2: - strscpy(format->name, "HD-DV", sizeof(format->name)); - break; - default: + if ((buffer[8] & 0x7f) > 2) { uvc_dbg(dev, DESCR, "device %d videostreaming interface %d: unknown DV format %u\n", dev->udev->devnum, @@ -625,9 +608,6 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }
- strlcat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz", - sizeof(format->name)); - format->fcc = V4L2_PIX_FMT_DV; format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM; format->bpp = 0; @@ -654,7 +634,7 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }
- uvc_dbg(dev, DESCR, "Found format %s\n", format->name); + uvc_dbg(dev, DESCR, "Found format %p4cc", &format->fcc);
buflen -= buffer[0]; buffer += buffer[0]; diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 63842eb223a18..e7716da3b859a 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -649,8 +649,6 @@ static int uvc_ioctl_enum_fmt(struct uvc_streaming *stream, fmt->flags = 0; if (format->flags & UVC_FMT_FLAG_COMPRESSED) fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; - strscpy(fmt->description, format->name, sizeof(fmt->description)); - fmt->description[sizeof(fmt->description) - 1] = 0; fmt->pixelformat = format->fcc; return 0; } diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index c3ea6a53869f5..efeb3f8bf9357 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -405,8 +405,6 @@ struct uvc_format { u32 fcc; u32 flags;
- char name[32]; - unsigned int nframes; struct uvc_frame *frame; };
From: Ricardo Ribalda ribalda@chromium.org
[ Upstream commit 41ddb251c68ac75c101d3a50a68c4629c9055e4c ]
If the source entity does not contain any pads, do not create a link.
Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_entity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c index 7c4d2f93d3513..cc68dd24eb42d 100644 --- a/drivers/media/usb/uvc/uvc_entity.c +++ b/drivers/media/usb/uvc/uvc_entity.c @@ -37,7 +37,7 @@ static int uvc_mc_create_links(struct uvc_video_chain *chain, continue;
remote = uvc_entity_by_id(chain->dev, entity->baSourceID[i]); - if (remote == NULL) + if (remote == NULL || remote->num_pads == 0) return -EINVAL;
source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit 4867bb590ae445bcfaa711a86b603c97e94574b3 ]
On a Webcam from Quanta, we see the following error.
usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03 usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 3-5: Product: USB2.0 HD UVC WebCam usb 3-5: Manufacturer: Quanta usb 3-5: SerialNumber: 0x0001 ... uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2) uvcvideo: Failed to initialize entity for entity 5 uvcvideo: Failed to register entities (-22).
The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a string index of '7' associated with that entity. The attempt to read that string from the camera fails with error -32 (-EPIPE). usb_string() returns that error, but it is ignored. As result, the entity name is empty. This later causes v4l2_device_register_subdev() to return -EINVAL, and no entities are registered as result.
While this appears to be a firmware problem with the camera, the kernel should still handle the situation gracefully. To do that, check the return value from usb_string(). If it reports an error, assign the entity's default name.
Signed-off-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 48 ++++++++++++------------------ 1 file changed, 19 insertions(+), 29 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 7e02b158a8c9d..de32985f235fc 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -1131,10 +1131,8 @@ static int uvc_parse_vendor_control(struct uvc_device *dev, + n; memcpy(unit->extension.bmControls, &buffer[23+p], 2*n);
- if (buffer[24+p+2*n] != 0) - usb_string(udev, buffer[24+p+2*n], unit->name, - sizeof(unit->name)); - else + if (buffer[24+p+2*n] == 0 || + usb_string(udev, buffer[24+p+2*n], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Extension %u", buffer[3]);
list_add_tail(&unit->list, &dev->entities); @@ -1258,15 +1256,15 @@ static int uvc_parse_standard_control(struct uvc_device *dev, memcpy(term->media.bmTransportModes, &buffer[10+n], p); }
- if (buffer[7] != 0) - usb_string(udev, buffer[7], term->name, - sizeof(term->name)); - else if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) - sprintf(term->name, "Camera %u", buffer[3]); - else if (UVC_ENTITY_TYPE(term) == UVC_ITT_MEDIA_TRANSPORT_INPUT) - sprintf(term->name, "Media %u", buffer[3]); - else - sprintf(term->name, "Input %u", buffer[3]); + if (buffer[7] == 0 || + usb_string(udev, buffer[7], term->name, sizeof(term->name)) < 0) { + if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) + sprintf(term->name, "Camera %u", buffer[3]); + if (UVC_ENTITY_TYPE(term) == UVC_ITT_MEDIA_TRANSPORT_INPUT) + sprintf(term->name, "Media %u", buffer[3]); + else + sprintf(term->name, "Input %u", buffer[3]); + }
list_add_tail(&term->list, &dev->entities); break; @@ -1298,10 +1296,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
memcpy(term->baSourceID, &buffer[7], 1);
- if (buffer[8] != 0) - usb_string(udev, buffer[8], term->name, - sizeof(term->name)); - else + if (buffer[8] == 0 || + usb_string(udev, buffer[8], term->name, sizeof(term->name)) < 0) sprintf(term->name, "Output %u", buffer[3]);
list_add_tail(&term->list, &dev->entities); @@ -1323,10 +1319,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev,
memcpy(unit->baSourceID, &buffer[5], p);
- if (buffer[5+p] != 0) - usb_string(udev, buffer[5+p], unit->name, - sizeof(unit->name)); - else + if (buffer[5+p] == 0 || + usb_string(udev, buffer[5+p], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Selector %u", buffer[3]);
list_add_tail(&unit->list, &dev->entities); @@ -1356,10 +1350,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev, if (dev->uvc_version >= 0x0110) unit->processing.bmVideoStandards = buffer[9+n];
- if (buffer[8+n] != 0) - usb_string(udev, buffer[8+n], unit->name, - sizeof(unit->name)); - else + if (buffer[8+n] == 0 || + usb_string(udev, buffer[8+n], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Processing %u", buffer[3]);
list_add_tail(&unit->list, &dev->entities); @@ -1387,10 +1379,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev, unit->extension.bmControls = (u8 *)unit + sizeof(*unit); memcpy(unit->extension.bmControls, &buffer[23+p], n);
- if (buffer[23+p+n] != 0) - usb_string(udev, buffer[23+p+n], unit->name, - sizeof(unit->name)); - else + if (buffer[23+p+n] == 0 || + usb_string(udev, buffer[23+p+n], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Extension %u", buffer[3]);
list_add_tail(&unit->list, &dev->entities);
From: Ricardo Ribalda ribalda@chromium.org
[ Upstream commit 136effa754b57632f99574fc4a3433e0cfc031d9 ]
Logitech B910 and C910 firmware are unable to recover from a USB autosuspend. When it resumes, the device is in a state where it only produces invalid frames. Eg:
$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1 [350438.435219] uvcvideo: uvc_v4l2_open [350438.529794] uvcvideo: Resuming interface 2 [350438.529801] uvcvideo: Resuming interface 3 [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080. [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps). [350438.551496] uvcvideo: uvc_v4l2_mmap [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth. [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth). [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each. [350439.316468] uvcvideo: Marking buffer as bad (error bit set). [350439.316475] uvcvideo: Frame complete (EOF found). [350439.316477] uvcvideo: EOF in empty payload. [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249 [350439.384510] uvcvideo: Marking buffer as bad (error bit set). [350439.384516] uvcvideo: Frame complete (EOF found). [350439.384518] uvcvideo: EOF in empty payload. [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316 [350439.448472] uvcvideo: Marking buffer as bad (error bit set). [350439.448478] uvcvideo: Frame complete (EOF found). [350439.448480] uvcvideo: EOF in empty payload. [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382 ...(loop)...
The devices can leave this invalid state if the alternate setting of the streaming interface is toggled.
This patch adds a quirk for this device so it can be autosuspended properly.
lsusb -v: Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x0821 HD Webcam C910 bcdDevice 0.10 iManufacturer 0 iProduct 0 iSerial 1 390022B0 bNumConfigurations 1
Signed-off-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++ drivers/media/usb/uvc/uvc_video.c | 11 +++++++++++ drivers/media/usb/uvc/uvcvideo.h | 1 + 3 files changed, 30 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index de32985f235fc..3e80a8c2c995a 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -2684,6 +2684,24 @@ static const struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = (kernel_ulong_t)&uvc_quirk_probe_minmax }, + /* Logitech, Webcam C910 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x0821, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)}, + /* Logitech, Webcam B910 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x0823, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)}, /* Logitech Quickcam Fusion */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 1b4cc934109e8..af2c6cb9fa3c4 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1951,6 +1951,17 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, "Selecting alternate setting %u (%u B/frame bandwidth)\n", altsetting, best_psize);
+ /* + * Some devices, namely the Logitech C910 and B910, are unable + * to recover from a USB autosuspend, unless the alternate + * setting of the streaming interface is toggled. + */ + if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) { + usb_set_interface(stream->dev->udev, intfnum, + altsetting); + usb_set_interface(stream->dev->udev, intfnum, 0); + } + ret = usb_set_interface(stream->dev->udev, intfnum, altsetting); if (ret < 0) return ret; diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index efeb3f8bf9357..ab50e2ddbcf26 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -209,6 +209,7 @@ #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400 #define UVC_QUIRK_FORCE_Y8 0x00000800 #define UVC_QUIRK_FORCE_BPP 0x00001000 +#define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000
/* Format flags */ #define UVC_FMT_FLAG_COMPRESSED 0x00000001
From: Kees Cook keescook@chromium.org
[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ]
The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook keescook@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_video.c | 4 +++- include/uapi/linux/uvcvideo.h | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index af2c6cb9fa3c4..f477cfbbb905a 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1334,7 +1334,9 @@ static void uvc_video_decode_meta(struct uvc_streaming *stream, if (has_scr) memcpy(stream->clock.last_scr, scr, 6);
- memcpy(&meta->length, mem, length); + meta->length = mem[0]; + meta->flags = mem[1]; + memcpy(meta->buf, &mem[2], length - 2); meta_buf->bytesused += length + sizeof(meta->ns) + sizeof(meta->sof);
uvc_dbg(stream->dev, FRAME, diff --git a/include/uapi/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h index 8288137387c0d..a9d0a64007ba5 100644 --- a/include/uapi/linux/uvcvideo.h +++ b/include/uapi/linux/uvcvideo.h @@ -86,7 +86,7 @@ struct uvc_xu_control_query { * struct. The first two fields are added by the driver, they can be used for * clock synchronisation. The rest is an exact copy of a UVC payload header. * Only complete objects with complete buffers are included. Therefore it's - * always sizeof(meta->ts) + sizeof(meta->sof) + meta->length bytes large. + * always sizeof(meta->ns) + sizeof(meta->sof) + meta->length bytes large. */ struct uvc_meta_buf { __u64 ns;
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 30374434edab20e25776f8ecb4bc9d1e54309487 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Alan Stern stern@rowland.harvard.edu Cc: Jilin Yuan yuanjilin@cdjrlc.com Link: https://lore.kernel.org/r/20230106152828.3790902-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/core/usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 62368c4ed37af..cc36f9f228148 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1036,7 +1036,7 @@ static void usb_debugfs_init(void)
static void usb_debugfs_cleanup(void) { - debugfs_remove(debugfs_lookup("devices", usb_debug_root)); + debugfs_lookup_and_remove("devices", usb_debug_root); }
/*
From: Yuan Can yuancan@huawei.com
[ Upstream commit f6510a93cfd8c6c79b4dda0f2967cdc6df42eff4 ]
As the dma_alloc_coherent may return NULL, the return value needs to be checked to avoid NULL poineter dereference.
Signed-off-by: Yuan Can yuancan@huawei.com Reviewed-by: Simon Horman horms@verge.net.au Link: https://lore.kernel.org/r/20230119083119.16956-1-yuancan@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/emxx_udc/emxx_udc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c index b6abd3770e81c..edd20a03f7a26 100644 --- a/drivers/staging/emxx_udc/emxx_udc.c +++ b/drivers/staging/emxx_udc/emxx_udc.c @@ -2590,10 +2590,15 @@ static int nbu2ss_ep_queue(struct usb_ep *_ep, req->unaligned = false;
if (req->unaligned) { - if (!ep->virt_buf) + if (!ep->virt_buf) { ep->virt_buf = dma_alloc_coherent(udc->dev, PAGE_SIZE, &ep->phys_buf, GFP_ATOMIC | GFP_DMA); + if (!ep->virt_buf) { + spin_unlock_irqrestore(&udc->lock, flags); + return -ENOMEM; + } + } if (ep->epnum > 0) { if (ep->direct == USB_DIR_IN) memcpy(ep->virt_buf, req->req.buf,
From: Sven Schnelle svens@linux.ibm.com
[ Upstream commit db4df8e9d79e7d37732c1a1b560958e8dadfefa1 ]
When specifying an invalid console= device like console=tty3270, tty_driver_lookup_tty() returns the tty struct without checking whether index is a valid number.
To reproduce:
qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \ -kernel ../linux-build-x86/arch/x86/boot/bzImage \ -append "console=ttyS0 console=tty3270"
This crashes with:
[ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef [ 0.771265] #PF: supervisor read access in kernel mode [ 0.771773] #PF: error_code(0x0000) - not-present page [ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI [ 0.774878] RIP: 0010:tty_open+0x268/0x6f0 [ 0.784013] chrdev_open+0xbd/0x230 [ 0.784444] ? cdev_device_add+0x80/0x80 [ 0.784920] do_dentry_open+0x1e0/0x410 [ 0.785389] path_openat+0xca9/0x1050 [ 0.785813] do_filp_open+0xaa/0x150 [ 0.786240] file_open_name+0x133/0x1b0 [ 0.786746] filp_open+0x27/0x50 [ 0.787244] console_on_rootfs+0x14/0x4d [ 0.787800] kernel_init_freeable+0x1e4/0x20d [ 0.788383] ? rest_init+0xc0/0xc0 [ 0.788881] kernel_init+0x11/0x120 [ 0.789356] ret_from_fork+0x22/0x30
Signed-off-by: Sven Schnelle svens@linux.ibm.com Reviewed-by: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20221209112737.3222509-2-svens@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/tty_io.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 6616d4a0d41de..64dd6439d1797 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1244,14 +1244,16 @@ static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, { struct tty_struct *tty;
- if (driver->ops->lookup) + if (driver->ops->lookup) { if (!file) tty = ERR_PTR(-EIO); else tty = driver->ops->lookup(driver, file, idx); - else + } else { + if (idx >= driver->num) + return ERR_PTR(-EINVAL); tty = driver->ttys[idx]; - + } if (!IS_ERR(tty)) tty_kref_get(tty); return tty;
From: Sherry Sun sherry.sun@nxp.com
[ Upstream commit c4c81db5cf8bc53d6160c3abf26d382c841aa434 ]
LPUART IP has a bug that it treats the CTS as higher priority than the break signal, which cause the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled.
Add this workaround patch to fix the IP bug, we can disable CTS before asserting SBK to avoid any interference from CTS, and re-enable it when break off.
Such as for the bluetooth chip power save feature, host can let the BT chip get into sleep state by sending a UART break signal, and wake it up by turning off the UART break. If the BT chip enters the sleep mode successfully, it will pull up the CTS line, if the BT chip is woken up, it will pull down the CTS line. If without this workaround patch, the UART TX pin cannot send the break signal successfully as it affected by the BT CTS pin. After adding this patch, the BT power save feature can work well.
Signed-off-by: Sherry Sun sherry.sun@nxp.com Link: https://lore.kernel.org/r/20221214031137.28815-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/fsl_lpuart.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index fc311df9f1c9d..1497098e100bf 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1484,12 +1484,32 @@ static void lpuart_break_ctl(struct uart_port *port, int break_state)
static void lpuart32_break_ctl(struct uart_port *port, int break_state) { - unsigned long temp; + unsigned long temp, modem; + struct tty_struct *tty; + unsigned int cflag = 0; + + tty = tty_port_tty_get(&port->state->port); + if (tty) { + cflag = tty->termios.c_cflag; + tty_kref_put(tty); + }
temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK; + modem = lpuart32_read(port, UARTMODIR);
- if (break_state != 0) + if (break_state != 0) { temp |= UARTCTRL_SBK; + /* + * LPUART CTS has higher priority than SBK, need to disable CTS before + * asserting SBK to avoid any interference if flow control is enabled. + */ + if (cflag & CRTSCTS && modem & UARTMODIR_TXCTSE) + lpuart32_write(port, modem & ~UARTMODIR_TXCTSE, UARTMODIR); + } else { + /* Re-enable the CTS when break off. */ + if (cflag & CRTSCTS && !(modem & UARTMODIR_TXCTSE)) + lpuart32_write(port, modem | UARTMODIR_TXCTSE, UARTMODIR); + }
lpuart32_write(port, temp, UARTCTRL); }
From: Isaac True isaac.true@canonical.com
[ Upstream commit c8f71b49ee4d28930c4a6798d1969fa91dc4ef3e ]
The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising.
This issue manifests itself as an Oops when the GPIO lines are configured:
Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c
This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order.
Co-developed-by: Wen-chien Jesse Sung jesse.sung@canonical.com Signed-off-by: Wen-chien Jesse Sung jesse.sung@canonical.com Signed-off-by: Isaac True isaac.true@canonical.com Link: https://lore.kernel.org/r/20221130105529.698385-1-isaac.true@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/sc16is7xx.c | 51 +++++++++++++++++----------------- 1 file changed, 26 insertions(+), 25 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 0ab788058fa2a..b57cf8ddbf63b 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1245,25 +1245,6 @@ static int sc16is7xx_probe(struct device *dev, } sched_set_fifo(s->kworker_task);
-#ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) { - /* Setup GPIO cotroller */ - s->gpio.owner = THIS_MODULE; - s->gpio.parent = dev; - s->gpio.label = dev_name(dev); - s->gpio.direction_input = sc16is7xx_gpio_direction_input; - s->gpio.get = sc16is7xx_gpio_get; - s->gpio.direction_output = sc16is7xx_gpio_direction_output; - s->gpio.set = sc16is7xx_gpio_set; - s->gpio.base = -1; - s->gpio.ngpio = devtype->nr_gpio; - s->gpio.can_sleep = 1; - ret = gpiochip_add_data(&s->gpio, s); - if (ret) - goto out_thread; - } -#endif - /* reset device, purging any pending irq / data */ regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, SC16IS7XX_IOCONTROL_SRESET_BIT); @@ -1329,6 +1310,25 @@ static int sc16is7xx_probe(struct device *dev, s->p[u].irda_mode = true; }
+#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) { + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.parent = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr_gpio; + s->gpio.can_sleep = 1; + ret = gpiochip_add_data(&s->gpio, s); + if (ret) + goto out_thread; + } +#endif + /* * Setup interrupt. We first try to acquire the IRQ line as level IRQ. * If that succeeds, we can allow sharing the interrupt as well. @@ -1348,18 +1348,19 @@ static int sc16is7xx_probe(struct device *dev, if (!ret) return 0;
-out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } - #ifdef CONFIG_GPIOLIB if (devtype->nr_gpio) gpiochip_remove(&s->gpio);
out_thread: #endif + +out_ports: + for (i--; i >= 0; i--) { + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, &sc16is7xx_lines); + } + kthread_stop(s->kworker_task);
out_clk:
From: Alexander Usyskin alexander.usyskin@intel.com
[ Upstream commit 4b8659e2c258e4fdac9ccdf06cc20c0677894ef9 ]
For easier debugging, upon error, print also return values from __mei_cl_recv() and __mei_cl_send() functions.
Signed-off-by: Alexander Usyskin alexander.usyskin@intel.com Signed-off-by: Tomas Winkler tomas.winkler@intel.com Link: https://lore.kernel.org/r/20221212214933.275434-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/mei/bus-fixup.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 67844089db216..9d082287dbe02 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -175,7 +175,7 @@ static int mei_fwver(struct mei_cl_device *cldev) ret = __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req), 0, MEI_CL_IO_TX_BLOCKING); if (ret < 0) { - dev_err(&cldev->dev, "Could not send ReqFWVersion cmd\n"); + dev_err(&cldev->dev, "Could not send ReqFWVersion cmd ret = %d\n", ret); return ret; }
@@ -187,7 +187,7 @@ static int mei_fwver(struct mei_cl_device *cldev) * Should be at least one version block, * error out if nothing found */ - dev_err(&cldev->dev, "Could not read FW version\n"); + dev_err(&cldev->dev, "Could not read FW version ret = %d\n", bytes_recv); return -EIO; }
@@ -337,7 +337,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(cmd), 0, MEI_CL_IO_TX_BLOCKING); if (ret < 0) { - dev_err(bus->dev, "Could not send IF version cmd\n"); + dev_err(bus->dev, "Could not send IF version cmd ret = %d\n", ret); return ret; }
@@ -352,7 +352,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, &vtag, 0, 0); if (bytes_recv < 0 || (size_t)bytes_recv < if_version_length) { - dev_err(bus->dev, "Could not read IF version\n"); + dev_err(bus->dev, "Could not read IF version ret = %d\n", bytes_recv); ret = -EIO; goto err; }
From: "Maciej W. Rozycki" macro@orcam.me.uk
[ Upstream commit c087df8d1e7dc2e764d11234d84b5af46d500f16 ]
No Oxford Semiconductor PCI or PCIe parallel port device supports the Parallel Port FIFO mode. All support the PS/2 Parallel Port mode and the Enhanced Parallel Port mode via the ECR register. The original 5V PCI OX16PCI954 device does not support the Extended Capabilities Port mode, the Test mode or the Configuration mode, but all the other OxSemi devices do, including in particular the 3.3V PCI OXmPCI954 device and the universal voltage PCI OXuPCI954 device. All the unsupported modes are marked reserved in the relevant datasheets.
Accordingly enable the `base_hi' BAR for the 954 devices to enable PS2 and EPP mode support via the ECR register, however mask the COMPAT mode and, until we have a way to determine what chip variant it is that we poke at, also the ECP mode, and mask the COMPAT mode only for all the remaining OxSemi devices, fixing errors like:
parport0: FIFO is stuck FIFO write timed out
and a non-functional port when the Parallel Port FIFO mode is selected.
Complementing the fix apply an ECR mask for all these devices, which are documented to only permit writing to the mode field of the ECR register with a bit pattern of 00001 required to be written to bits 4:0 on mode field writes. No nFault or service interrupts are implemented, which will therefore never have to be enabled, though bit 2 does report the FIFO threshold status to be polled for in the ECP mode where supported.
We have a documented case of writing 1 to bit 2 causing a lock-up with at least one OX12PCI840 device (from old drivers/parport/ChangeLog):
2001-10-10 Tim Waugh twaugh@redhat.com
* parport_pc.c: Support for OX12PCI840 PCI card (reported by mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we just don't trust its ECR).
which commit adbd321a17cc ("parport_pc: add base_hi BAR for oxsemi_840") must have broken and by applying an ECR mask here we prevent the lock-up from triggering. This could have been the reason for requiring 00001 to be written to bits 4:0 of ECR.
Update the inline comment accordingly; it has come from Linux 2.4.12 back in 2001 and predates the introduction of OXmPCI954 and OXuPCI954 devices that do support ECP.
References:
[1] "OX16PCI954 Integrated Quad UART and PCI interface", Oxford Semiconductor Ltd., Data Sheet Revision 1.3, Feb. 1999, Chapter 9 "Bidirectional Parallel Port", pp. 53-55
[2] "OX16PCI952 Data Sheet, Integrated High Performance Dual UARTs, Parallel Port and 5.0v PCI interface", Oxford Semiconductor Ltd., DS_B008A_00, Datasheet rev 1.1, June 2001, Chapter 8 "Bi-directional Parallel Port", pp. 52-56
[3] "OXmPCI954 DATA SHEET Integrated High Performance Quad UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford Semiconductor Ltd., DS-0019, June 2005, Chapter 10 "Bidirectional Parallel Port", pp. 86-90
[4] "OXmPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford Semiconductor Ltd., DS-0020, June 2005, Chapter 8 "Bidirectional Parallel Port", pp. 73-77
[5] "OX12PCI840 Integrated Parallel Port and PCI interface", Oxford Semiconductor Ltd., DS-0021, Jun 2005, Chapter 5 "Bi-directional Parallel Port", pp. 18-21
[6] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port", Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Chapter "Parallel Port Function", pp. 59-62
[7] "OXPCIe840 PCI Express Bridge to Parallel Port", Oxford Semiconductor, Inc., DS-0049, Mar 06 08, Chapter "Parallel Port Function", pp. 15-18
[8] "OXuPCI954 Data Sheet, Integrated High Performance Quad UARTs, 8-bit Local Bus/Parallel Port, 3.3 V and 5 V (Universal Voltage) PCI Interface.", Oxford Semiconductor, Inc., DS-0058, 26 Jan 2009, Chapter 8 "Bidirectional Parallel Port", pp. 62-65
[9] "OXuPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port, 3.3 V and 5.0 V Universal Voltage PCI Interface.", Oxford Semiconductor, Inc., DS-0059, Sep 2007, Chapter 8 "Bidirectional Parallel Port", pp. 61-64
Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Link: https://lore.kernel.org/r/20230108215656.6433-6-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/parport/parport_pc.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 925be41eeebec..c2af2aa6d437c 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2657,12 +2657,19 @@ static struct parport_pc_pci { /* titan_010l */ { 1, { { 3, -1 }, } }, /* avlab_1p */ { 1, { { 0, 1}, } }, /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} }, - /* The Oxford Semi cards are unusual: 954 doesn't support ECP, - * and 840 locks up if you write 1 to bit 2! */ - /* oxsemi_952 */ { 1, { { 0, 1 }, } }, - /* oxsemi_954 */ { 1, { { 0, -1 }, } }, - /* oxsemi_840 */ { 1, { { 0, 1 }, } }, - /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, + /* The Oxford Semi cards are unusual: older variants of 954 don't + * support ECP, and 840 locks up if you write 1 to bit 2! None + * implement nFault or service interrupts and all require 00001 + * bit pattern to be used for bits 4:0 with ECR writes. */ + /* oxsemi_952 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_954 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_ECP | + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_840 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } },
From: Yulong Zhang yulong.zhang@metoak.net
[ Upstream commit f2edf0c819a4823cd6c288801ce737e8d4fcde06 ]
1. fopen sysfs without fclose. 2. asprintf filename without free. 3. if asprintf return error,do not need to free the buffer.
Signed-off-by: Yulong Zhang yulong.zhang@metoak.net Link: https://lore.kernel.org/r/20230117025147.69890-1-yulong.zhang@metoak.net Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/iio/iio_utils.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c index 8d35893b2fa85..6a00a6eecaef0 100644 --- a/tools/iio/iio_utils.c +++ b/tools/iio/iio_utils.c @@ -264,6 +264,7 @@ int iioutils_get_param_float(float *output, const char *param_name, if (fscanf(sysfsfp, "%f", output) != 1) ret = errno ? -errno : -ENODATA;
+ fclose(sysfsfp); break; } error_free_filename: @@ -345,9 +346,9 @@ int build_channel_array(const char *device_dir, int buffer_idx, }
sysfsfp = fopen(filename, "r"); + free(filename); if (!sysfsfp) { ret = -errno; - free(filename); goto error_close_dir; }
@@ -357,7 +358,6 @@ int build_channel_array(const char *device_dir, int buffer_idx, if (fclose(sysfsfp)) perror("build_channel_array(): Failed to close file");
- free(filename); goto error_close_dir; } if (ret == 1) @@ -365,11 +365,9 @@ int build_channel_array(const char *device_dir, int buffer_idx,
if (fclose(sysfsfp)) { ret = -errno; - free(filename); goto error_close_dir; }
- free(filename); }
*ci_array = malloc(sizeof(**ci_array) * (*counter)); @@ -395,9 +393,9 @@ int build_channel_array(const char *device_dir, int buffer_idx, }
sysfsfp = fopen(filename, "r"); + free(filename); if (!sysfsfp) { ret = -errno; - free(filename); count--; goto error_cleanup_array; } @@ -405,20 +403,17 @@ int build_channel_array(const char *device_dir, int buffer_idx, errno = 0; if (fscanf(sysfsfp, "%i", ¤t_enabled) != 1) { ret = errno ? -errno : -ENODATA; - free(filename); count--; goto error_cleanup_array; }
if (fclose(sysfsfp)) { ret = -errno; - free(filename); count--; goto error_cleanup_array; }
if (!current_enabled) { - free(filename); count--; continue; } @@ -429,7 +424,6 @@ int build_channel_array(const char *device_dir, int buffer_idx, strlen(ent->d_name) - strlen("_en")); if (!current->name) { - free(filename); ret = -ENOMEM; count--; goto error_cleanup_array; @@ -439,7 +433,6 @@ int build_channel_array(const char *device_dir, int buffer_idx, ret = iioutils_break_up_name(current->name, ¤t->generic_name); if (ret) { - free(filename); free(current->name); count--; goto error_cleanup_array; @@ -450,17 +443,16 @@ int build_channel_array(const char *device_dir, int buffer_idx, scan_el_dir, current->name); if (ret < 0) { - free(filename); ret = -ENOMEM; goto error_cleanup_array; }
sysfsfp = fopen(filename, "r"); + free(filename); if (!sysfsfp) { ret = -errno; - fprintf(stderr, "failed to open %s\n", - filename); - free(filename); + fprintf(stderr, "failed to open %s/%s_index\n", + scan_el_dir, current->name); goto error_cleanup_array; }
@@ -470,17 +462,14 @@ int build_channel_array(const char *device_dir, int buffer_idx, if (fclose(sysfsfp)) perror("build_channel_array(): Failed to close file");
- free(filename); goto error_cleanup_array; }
if (fclose(sysfsfp)) { ret = -errno; - free(filename); goto error_cleanup_array; }
- free(filename); /* Find the scale */ ret = iioutils_get_param_float(¤t->scale, "scale",
From: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com
[ Upstream commit e56d2c34ce9dc122b1a618172ec0e05e50adb9e9 ]
Smatch Warns: drivers/iio/accel/mma9551_core.c:357 mma9551_read_status_word() error: uninitialized symbol 'v'.
When (offset >= 1 << 12) is true mma9551_transfer() will return -EINVAL without 'v' being initialized, so check for the error and return.
Note: Not a bug as such because the caller checks return value and doesn't not use this parameter in the problem case.
Signed-off-by: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com Link: https://lore.kernel.org/r/20230126152147.3585874-1-harshit.m.mogalapalli@ora... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/mma9551_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c index fbf2e2c45678b..413610a749c24 100644 --- a/drivers/iio/accel/mma9551_core.c +++ b/drivers/iio/accel/mma9551_core.c @@ -354,9 +354,12 @@ int mma9551_read_status_word(struct i2c_client *client, u8 app_id,
ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, reg, NULL, 0, (u8 *)&v, 2); + if (ret < 0) + return ret; + *val = be16_to_cpu(v);
- return ret; + return 0; } EXPORT_SYMBOL(mma9551_read_status_word);
From: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com
[ Upstream commit 64a68158738ec8f520347144352f7a09bdb9e169 ]
Smatch Warns: drivers/iio/accel/mma9551_core.c:299 mma9551_read_config_word() error: uninitialized symbol 'v'.
When (offset >= 1 << 12) is true mma9551_transfer() will return -EINVAL without 'v' being initialized, so check for the error and return.
Note: No actual bug as caller checks the return value and does not use the parameter in the problem case.
Signed-off-by: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com Link: https://lore.kernel.org/r/20230126153610.3586243-1-harshit.m.mogalapalli@ora... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/mma9551_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c index 413610a749c24..9023c07bb57b4 100644 --- a/drivers/iio/accel/mma9551_core.c +++ b/drivers/iio/accel/mma9551_core.c @@ -296,9 +296,12 @@ int mma9551_read_config_word(struct i2c_client *client, u8 app_id,
ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, reg, NULL, 0, (u8 *)&v, 2); + if (ret < 0) + return ret; + *val = be16_to_cpu(v);
- return ret; + return 0; } EXPORT_SYMBOL(mma9551_read_config_word);
From: Alper Nebi Yasak alpernebiyasak@gmail.com
[ Upstream commit e6acaf25cba14661211bb72181c35dd13b24f5b3 ]
The coreboot framebuffer doesn't support transparency, its 'reserved' bit field is merely padding for byte/word alignment of pixel colors [1]. When trying to match the framebuffer to a simplefb format, the kernel driver unnecessarily requires the format's transparency bit field to exactly match this padding, even if the former is zero-width.
Due to a coreboot bug [2] (fixed upstream), some boards misreport the reserved field's size as equal to its position (0x18 for both on a 'Lick' Chromebook), and the driver fails to probe where it would have otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.
Remove the transparency comparison with reserved bits. When the bits-per-pixel and other color components match, transparency will already be in a subset of the reserved field. Not forcing it to match reserved bits allows the driver to work on the boards which misreport the reserved field. It also enables using simplefb formats that don't have transparency bits, although this doesn't currently happen due to format support and ordering in linux/platform_data/simplefb.h.
[1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/in... [2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/inte...
Signed-off-by: Alper Nebi Yasak alpernebiyasak@gmail.com Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/google/framebuffer-coreboot.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/firmware/google/framebuffer-coreboot.c b/drivers/firmware/google/framebuffer-coreboot.c index c6dcc1ef93acf..c323a818805cc 100644 --- a/drivers/firmware/google/framebuffer-coreboot.c +++ b/drivers/firmware/google/framebuffer-coreboot.c @@ -43,9 +43,7 @@ static int framebuffer_probe(struct coreboot_device *dev) fb->green_mask_pos == formats[i].green.offset && fb->green_mask_size == formats[i].green.length && fb->blue_mask_pos == formats[i].blue.offset && - fb->blue_mask_size == formats[i].blue.length && - fb->reserved_mask_pos == formats[i].transp.offset && - fb->reserved_mask_size == formats[i].transp.length) + fb->blue_mask_size == formats[i].blue.length) pdata.format = formats[i].name; } if (!pdata.format)
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 3dca1f89ae3455963d7b53245ecf298ea9bae857 ]
Don't hold sdw_dev_lock while calling the peripheral driver probe() and remove() callbacks.
Holding sdw_dev_lock around the probe() and remove() calls causes a theoretical mutex inversion which lockdep will assert on.
During probe() the sdw_dev_lock mutex is taken first and then ASoC/ALSA locks are taken by the probe() implementation.
During normal operation ASoC can take its locks and then trigger a runtime resume of the component. The SoundWire resume will then take sdw_dev_lock. This is the reverse order compared to probe().
It's not necessary to hold sdw_dev_lock when calling the probe() and remove(), it is only used to prevent the bus core calling the driver callbacks if there isn't a driver or the driver is removing.
All calls to the driver callbacks are guarded by the 'probed' flag. So if sdw_dev_lock is held while setting and clearing the 'probed' flag this is sufficient to guarantee the safety of callback functions.
Removing the mutex from around the call to probe() means that it is now possible for a bus event (PING response) to be handled in parallel with the probe(). But sdw_bus_probe() already has handling for this by calling the device update_status() after the probe() has completed.
Example lockdep assert: [ 46.098514] ====================================================== [ 46.104736] WARNING: possible circular locking dependency detected [ 46.110961] 6.1.0-rc4-jamerson #1 Tainted: G E [ 46.116842] ------------------------------------------------------ [ 46.123063] mpg123/1130 is trying to acquire lock: [ 46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70 [ 46.137225] but task is already holding lock: [ 46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.151536] which lock already depends on the new lock.[ 46.159732] the existing dependency chain (in reverse order) is: [ 46.167231] -> #4 (&card->pcm_mutex){+.+.}-{3:3}: [ 46.173428] __mutex_lock+0x94/0x920 [ 46.177542] snd_soc_dpcm_runtime_update+0x2e/0x100 [ 46.182958] snd_soc_dapm_put_enum_double+0x1c2/0x200 [ 46.188548] snd_ctl_elem_write+0x10c/0x1d0 [ 46.193268] snd_ctl_ioctl+0x126/0x850 [ 46.197556] __x64_sys_ioctl+0x87/0xc0 [ 46.201845] do_syscall_64+0x38/0x90 [ 46.205959] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.211553] -> #3 (&card->controls_rwsem){++++}-{3:3}: [ 46.218188] down_write+0x2b/0xd0 [ 46.222038] snd_ctl_add_replace+0x39/0xb0 [ 46.226672] snd_soc_add_controls+0x53/0x80 [ 46.231393] soc_probe_component+0x1e4/0x2a0 [ 46.236202] snd_soc_bind_card+0x51a/0xc80 [ 46.240836] devm_snd_soc_register_card+0x43/0x90 [ 46.246079] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.251500] platform_probe+0x3c/0xa0 [ 46.255700] really_probe+0xde/0x390 [ 46.259814] __driver_probe_device+0x78/0x180 [ 46.264710] driver_probe_device+0x1e/0x90 [ 46.269347] __driver_attach+0x9f/0x1f0 [ 46.273721] bus_for_each_dev+0x78/0xc0 [ 46.278098] bus_add_driver+0x1ac/0x200 [ 46.282473] driver_register+0x8f/0xf0 [ 46.286759] do_one_initcall+0x58/0x310 [ 46.291136] do_init_module+0x4c/0x1f0 [ 46.295422] __do_sys_finit_module+0xb4/0x130 [ 46.300321] do_syscall_64+0x38/0x90 [ 46.304434] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.310027] -> #2 (&card->mutex){+.+.}-{3:3}: [ 46.315883] __mutex_lock+0x94/0x920 [ 46.320000] snd_soc_bind_card+0x3e/0xc80 [ 46.324551] devm_snd_soc_register_card+0x43/0x90 [ 46.329798] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.335219] platform_probe+0x3c/0xa0 [ 46.339420] really_probe+0xde/0x390 [ 46.343532] __driver_probe_device+0x78/0x180 [ 46.348430] driver_probe_device+0x1e/0x90 [ 46.353065] __driver_attach+0x9f/0x1f0 [ 46.357437] bus_for_each_dev+0x78/0xc0 [ 46.361812] bus_add_driver+0x1ac/0x200 [ 46.366716] driver_register+0x8f/0xf0 [ 46.371528] do_one_initcall+0x58/0x310 [ 46.376424] do_init_module+0x4c/0x1f0 [ 46.381239] __do_sys_finit_module+0xb4/0x130 [ 46.386665] do_syscall_64+0x38/0x90 [ 46.391299] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.397416] -> #1 (client_mutex){+.+.}-{3:3}: [ 46.404307] __mutex_lock+0x94/0x920 [ 46.408941] snd_soc_add_component+0x24/0x2c0 [ 46.414345] devm_snd_soc_register_component+0x54/0xa0 [ 46.420522] cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56] [ 46.427487] cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw] [ 46.434442] sdw_drv_probe+0x80/0x1a0 [ 46.439136] really_probe+0xde/0x390 [ 46.443738] __driver_probe_device+0x78/0x180 [ 46.449120] driver_probe_device+0x1e/0x90 [ 46.454247] __driver_attach+0x9f/0x1f0 [ 46.459106] bus_for_each_dev+0x78/0xc0 [ 46.463971] bus_add_driver+0x1ac/0x200 [ 46.468825] driver_register+0x8f/0xf0 [ 46.473592] do_one_initcall+0x58/0x310 [ 46.478441] do_init_module+0x4c/0x1f0 [ 46.483202] __do_sys_finit_module+0xb4/0x130 [ 46.488572] do_syscall_64+0x38/0x90 [ 46.493158] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.499229] -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}: [ 46.506737] __lock_acquire+0x1121/0x1df0 [ 46.511765] lock_acquire+0xd5/0x300 [ 46.516360] __mutex_lock+0x94/0x920 [ 46.520949] sdw_update_slave_status+0x26/0x70 [ 46.526409] sdw_clear_slave_status+0xd8/0xe0 [ 46.531783] intel_resume_runtime+0x139/0x2a0 [ 46.537155] __rpm_callback+0x41/0x120 [ 46.541919] rpm_callback+0x5d/0x70 [ 46.546422] rpm_resume+0x531/0x7e0 [ 46.550920] __pm_runtime_resume+0x4a/0x80 [ 46.556024] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.562611] __soc_pcm_open+0x62/0x520 [ 46.567375] dpcm_be_dai_startup+0x116/0x210 [ 46.572661] dpcm_fe_dai_open+0xf7/0x830 [ 46.577597] snd_pcm_open_substream+0x54a/0x8b0 [ 46.583145] snd_pcm_open.part.0+0xdc/0x200 [ 46.588341] snd_pcm_playback_open+0x51/0x80 [ 46.593625] chrdev_open+0xc0/0x250 [ 46.598129] do_dentry_open+0x15f/0x430 [ 46.602981] path_openat+0x75e/0xa80 [ 46.607575] do_filp_open+0xb2/0x160 [ 46.612162] do_sys_openat2+0x9a/0x160 [ 46.616922] __x64_sys_openat+0x53/0xa0 [ 46.621767] do_syscall_64+0x38/0x90 [ 46.626352] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.632414] other info that might help us debug this:[ 46.641862] Chain exists of: &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[ 46.655145] Possible unsafe locking scenario:[ 46.662048] CPU0 CPU1 [ 46.667080] ---- ---- [ 46.672108] lock(&card->pcm_mutex); [ 46.676267] lock(&card->controls_rwsem); [ 46.683382] lock(&card->pcm_mutex); [ 46.690063] lock(&slave->sdw_dev_lock); [ 46.694574] *** DEADLOCK ***[ 46.701942] 2 locks held by mpg123/1130: [ 46.706356] #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200 [ 46.715999] #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.725390] stack backtrace: [ 46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G E 6.1.0-rc4-jamerson #1 [ 46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020 [ 46.747270] Call Trace: [ 46.750239] <TASK> [ 46.752857] dump_stack_lvl+0x56/0x73 [ 46.757045] check_noncircular+0x102/0x120 [ 46.761664] __lock_acquire+0x1121/0x1df0 [ 46.766197] lock_acquire+0xd5/0x300 [ 46.770292] ? sdw_update_slave_status+0x26/0x70 [ 46.775432] ? lock_is_held_type+0xe2/0x140 [ 46.780143] __mutex_lock+0x94/0x920 [ 46.784241] ? sdw_update_slave_status+0x26/0x70 [ 46.789387] ? find_held_lock+0x2b/0x80 [ 46.793750] ? sdw_update_slave_status+0x26/0x70 [ 46.798894] ? lock_release+0x147/0x2f0 [ 46.803262] ? lockdep_init_map_type+0x47/0x250 [ 46.808315] ? sdw_update_slave_status+0x26/0x70 [ 46.813456] sdw_update_slave_status+0x26/0x70 [ 46.818422] sdw_clear_slave_status+0xd8/0xe0 [ 46.823302] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.828706] intel_resume_runtime+0x139/0x2a0 [ 46.833583] ? _raw_spin_unlock_irq+0x24/0x50 [ 46.838462] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.843866] __rpm_callback+0x41/0x120 [ 46.848142] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.853550] rpm_callback+0x5d/0x70 [ 46.857568] rpm_resume+0x531/0x7e0 [ 46.861578] ? _raw_spin_lock_irqsave+0x62/0x70 [ 46.866634] __pm_runtime_resume+0x4a/0x80 [ 46.871258] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.877358] __soc_pcm_open+0x62/0x520 [ 46.881634] ? dpcm_add_paths.isra.0+0x35d/0x4c0 [ 46.886784] dpcm_be_dai_startup+0x116/0x210 [ 46.891592] dpcm_fe_dai_open+0xf7/0x830 [ 46.896046] ? debug_mutex_init+0x33/0x50 [ 46.900591] snd_pcm_open_substream+0x54a/0x8b0 [ 46.905658] snd_pcm_open.part.0+0xdc/0x200 [ 46.910376] ? wake_up_q+0x90/0x90 [ 46.914312] snd_pcm_playback_open+0x51/0x80 [ 46.919118] chrdev_open+0xc0/0x250 [ 46.923147] ? cdev_device_add+0x90/0x90 [ 46.927608] do_dentry_open+0x15f/0x430 [ 46.931976] path_openat+0x75e/0xa80 [ 46.936086] do_filp_open+0xb2/0x160 [ 46.940194] ? lock_release+0x147/0x2f0 [ 46.944563] ? _raw_spin_unlock+0x29/0x50 [ 46.949101] do_sys_openat2+0x9a/0x160 [ 46.953377] __x64_sys_openat+0x53/0xa0 [ 46.957733] do_syscall_64+0x38/0x90 [ 46.961829] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.967402] RIP: 0033:0x7fa6397ccd3b [ 46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 [ 46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b [ 47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c [ 47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011 [ 47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802 [ 47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50 [ 47.038289] </TASK>
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230123172520.339367-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/bus_type.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 04b3529f89293..963498db0fd22 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -105,20 +105,19 @@ static int sdw_drv_probe(struct device *dev) if (ret) return ret;
- mutex_lock(&slave->sdw_dev_lock); - ret = drv->probe(slave, id); if (ret) { name = drv->name; if (!name) name = drv->driver.name; - mutex_unlock(&slave->sdw_dev_lock);
dev_err(dev, "Probe of %s failed: %d\n", name, ret); dev_pm_domain_detach(dev, false); return ret; }
+ mutex_lock(&slave->sdw_dev_lock); + /* device is probed so let's read the properties now */ if (drv->ops && drv->ops->read_prop) drv->ops->read_prop(slave); @@ -167,14 +166,12 @@ static int sdw_drv_remove(struct device *dev) int ret = 0;
mutex_lock(&slave->sdw_dev_lock); - slave->probed = false; + mutex_unlock(&slave->sdw_dev_lock);
if (drv->remove) ret = drv->remove(slave);
- mutex_unlock(&slave->sdw_dev_lock); - dev_pm_domain_detach(dev, false);
return ret;
From: Huacai Chen chenhuacai@loongson.cn
[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ]
Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-loongson.c | 44 +++++++++------------------ drivers/pci/pci.c | 10 ++++++ include/linux/pci.h | 1 + 3 files changed, 26 insertions(+), 29 deletions(-)
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 48169b1e38171..dc7b4e4293ced 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -60,37 +60,23 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk);
-static void loongson_mrrs_quirk(struct pci_dev *dev) +static void loongson_mrrs_quirk(struct pci_dev *pdev) { - struct pci_bus *bus = dev->bus; - struct pci_dev *bridge; - static const struct pci_device_id bridge_devids[] = { - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, - { 0, }, - }; - - /* look for the matching bridge */ - while (!pci_is_root_bus(bus)) { - bridge = bus->self; - bus = bus->parent; - /* - * Some Loongson PCIe ports have a h/w limitation of - * 256 bytes maximum read request size. They can't handle - * anything larger than this. So force this limit on - * any devices attached under these ports. - */ - if (pci_match_id(bridge_devids, bridge)) { - if (pcie_get_readrq(dev) > 256) { - pci_info(dev, "limiting MRRS to 256\n"); - pcie_set_readrq(dev, 256); - } - break; - } - } + /* + * Some Loongson PCIe ports have h/w limitations of maximum read + * request size. They can't handle anything larger than this. So + * force this limit on any devices attached under these ports. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + bridge->no_inc_mrrs = 1; } -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_mrrs_quirk);
static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a0c6a9eeb7c6d..d0d27c3ead69a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5970,6 +5970,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) { u16 v; int ret; + struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);
if (rq < 128 || rq > 4096 || !is_power_of_2(rq)) return -EINVAL; @@ -5988,6 +5989,15 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
v = (ffs(rq) - 8) << 12;
+ if (bridge->no_inc_mrrs) { + int max_mrrs = pcie_get_readrq(dev); + + if (rq > max_mrrs) { + pci_info(dev, "can't set Max_Read_Request_Size to %d; max is %d\n", rq, max_mrrs); + return -EINVAL; + } + } + ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_READRQ, v);
diff --git a/include/linux/pci.h b/include/linux/pci.h index 9d6e75222868f..34dd24c991804 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -557,6 +557,7 @@ struct pci_host_bridge { void *release_data; unsigned int ignore_reset_delay:1; /* For entire hierarchy */ unsigned int no_ext_tags:1; /* No Extended Tags */ + unsigned int no_inc_mrrs:1; /* No Increase MRRS */ unsigned int native_aer:1; /* OS may use PCIe AER */ unsigned int native_pcie_hotplug:1; /* OS may use PCIe hotplug */ unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit be308d68785b205e483b3a0c61ba3a82da468f2c ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Note, the root dentry for the debugfs directory for the device needs to be saved so we don't have to keep looking it up, which required a bit more refactoring to properly create and remove it when needed.
Reported-by: Bruce Chen bruce.chen@unisoc.com Reported-by: Cixi Geng cixi.geng1@unisoc.com Tested-by: Cixi Geng gengcixi@gmail.com Acked-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/20230202152820.2409908-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/debug.h | 3 +++ drivers/usb/dwc3/debugfs.c | 19 ++++++++----------- drivers/usb/dwc3/gadget.c | 4 +--- 4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index e82e4cbe4ec70..725653711411d 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1092,6 +1092,7 @@ struct dwc3_scratchpad_array { * address. * @num_ep_resized: carries the current number endpoints which have had its tx * fifo resized. + * @debug_root: root debugfs directory for this device to put its files in. */ struct dwc3 { struct work_struct drd_work; @@ -1303,6 +1304,7 @@ struct dwc3 { int max_cfg_eps; int last_fifo_depth; int num_ep_resized; + struct dentry *debug_root; };
#define INCRX_BURST_MODE 0 diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index d223c54115f4a..01d0366bf93ae 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -414,11 +414,14 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
#ifdef CONFIG_DEBUG_FS extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep); +extern void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep); extern void dwc3_debugfs_init(struct dwc3 *d); extern void dwc3_debugfs_exit(struct dwc3 *d); #else static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) { } +static inline void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep) +{ } static inline void dwc3_debugfs_init(struct dwc3 *d) { } static inline void dwc3_debugfs_exit(struct dwc3 *d) diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index f2b7675c7f621..850df0e6bcabf 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -873,27 +873,23 @@ static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { { "GDBGEPINFO", &dwc3_ep_info_register_fops, }, };
-static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, - struct dentry *parent) +void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) { + struct dentry *dir; int i;
+ dir = debugfs_create_dir(dep->name, dep->dwc->debug_root); for (i = 0; i < ARRAY_SIZE(dwc3_ep_file_map); i++) { const struct file_operations *fops = dwc3_ep_file_map[i].fops; const char *name = dwc3_ep_file_map[i].name;
- debugfs_create_file(name, 0444, parent, dep, fops); + debugfs_create_file(name, 0444, dir, dep, fops); } }
-void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) +void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep) { - struct dentry *dir; - struct dentry *root; - - root = debugfs_lookup(dev_name(dep->dwc->dev), usb_debug_root); - dir = debugfs_create_dir(dep->name, root); - dwc3_debugfs_create_endpoint_files(dep, dir); + debugfs_lookup_and_remove(dep->name, dep->dwc->debug_root); }
void dwc3_debugfs_init(struct dwc3 *dwc) @@ -911,6 +907,7 @@ void dwc3_debugfs_init(struct dwc3 *dwc) dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START;
root = debugfs_create_dir(dev_name(dwc->dev), usb_debug_root); + dwc->debug_root = root; debugfs_create_regset32("regdump", 0444, root, dwc->regset); debugfs_create_file("lsp_dump", 0644, root, dwc, &dwc3_lsp_fops);
@@ -929,6 +926,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
void dwc3_debugfs_exit(struct dwc3 *dwc) { - debugfs_remove(debugfs_lookup(dev_name(dwc->dev), usb_debug_root)); + debugfs_lookup_and_remove(dev_name(dwc->dev), usb_debug_root); kfree(dwc->regset); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4812ba4bbedd7..a0100d26de8e1 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3081,9 +3081,7 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) list_del(&dep->endpoint.ep_list); }
- debugfs_remove_recursive(debugfs_lookup(dep->name, - debugfs_lookup(dev_name(dep->dwc->dev), - usb_debug_root))); + dwc3_debugfs_remove_endpoint_dir(dep); kfree(dep); } }
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit ff35f3ea3baba5b81416ac02d005cfbf6dd182fa ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20230202153235.2412790-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/chipidea/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index faf6b078b6c44..bbc610e5bd69c 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -364,5 +364,5 @@ void dbg_create_files(struct ci_hdrc *ci) */ void dbg_remove_files(struct ci_hdrc *ci) { - debugfs_remove(debugfs_lookup(dev_name(ci->dev), usb_debug_root)); + debugfs_lookup_and_remove(dev_name(ci->dev), usb_debug_root); }
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 0a3f82c79c86278e7f144564b1cb6cc5c3657144 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20230202153235.2412790-3-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/uhci-hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d90b869f5f409..d138f62ce84d7 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -536,8 +536,8 @@ static void release_uhci(struct uhci_hcd *uhci) uhci->is_initialized = 0; spin_unlock_irq(&uhci->lock);
- debugfs_remove(debugfs_lookup(uhci_to_hcd(uhci)->self.bus_name, - uhci_debugfs_root)); + debugfs_lookup_and_remove(uhci_to_hcd(uhci)->self.bus_name, + uhci_debugfs_root);
for (i = 0; i < UHCI_NUM_SKELQH; i++) uhci_free_qh(uhci, uhci->skelqh[i]); @@ -700,7 +700,7 @@ static int uhci_start(struct usb_hcd *hcd) uhci->frame, uhci->frame_dma_handle);
err_alloc_frame: - debugfs_remove(debugfs_lookup(hcd->self.bus_name, uhci_debugfs_root)); + debugfs_lookup_and_remove(hcd->self.bus_name, uhci_debugfs_root);
return retval; }
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit e1523c4dbc54e164638ff8729d511cf91e27be04 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Vincent Mailhol mailhol.vincent@wanadoo.fr Link: https://lore.kernel.org/r/20230202153235.2412790-4-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/sl811-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 85623731a5162..825ff67273102 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1501,7 +1501,7 @@ static void create_debug_file(struct sl811 *sl811)
static void remove_debug_file(struct sl811 *sl811) { - debugfs_remove(debugfs_lookup("sl811h", usb_debug_root)); + debugfs_lookup_and_remove("sl811h", usb_debug_root); }
/*-------------------------------------------------------------------------*/
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 6b4040f452037a7e95472577891d57c6b18c89c5 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Reviewed-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20230202153235.2412790-5-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/fotg210-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 4b02ace09f3dc..d9a3fd8af7a01 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -862,7 +862,7 @@ static inline void remove_debug_files(struct fotg210_hcd *fotg210) { struct usb_bus *bus = &fotg210_to_hcd(fotg210)->self;
- debugfs_remove(debugfs_lookup(bus->bus_name, fotg210_debug_root)); + debugfs_lookup_and_remove(bus->bus_name, fotg210_debug_root); }
/* handshake - spin reading hc until handshake completes or fails
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit a95f62d5813facbec20ec087472eb313ee5fa8af ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Olav Kongas ok@artecdesign.ee Link: https://lore.kernel.org/r/20230202153235.2412790-6-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/isp116x-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 8c7f0991c21b5..9c3e12f2f25d8 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1206,7 +1206,7 @@ static void create_debug_file(struct isp116x *isp116x)
static void remove_debug_file(struct isp116x *isp116x) { - debugfs_remove(debugfs_lookup(hcd_name, usb_debug_root)); + debugfs_lookup_and_remove(hcd_name, usb_debug_root); }
#else
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit c26e682afc14caa87d44beed271eec8991e93c65 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Vincent Mailhol mailhol.vincent@wanadoo.fr Link: https://lore.kernel.org/r/20230202153235.2412790-7-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/isp1362-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index d8610ce8f2ecd..bc68669dfc50c 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2170,7 +2170,7 @@ static void create_debug_file(struct isp1362_hcd *isp1362_hcd)
static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) { - debugfs_remove(debugfs_lookup("isp1362", usb_debug_root)); + debugfs_lookup_and_remove("isp1362", usb_debug_root); }
/*-------------------------------------------------------------------------*/
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 73f4451368663ad28daa67980c6dd11d83b303eb ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Jakob Koschel jakobkoschel@gmail.com Link: https://lore.kernel.org/r/20230202153235.2412790-8-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/gr_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 4b35739d36951..d1febde6f2c4a 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -215,7 +215,7 @@ static void gr_dfs_create(struct gr_udc *dev)
static void gr_dfs_delete(struct gr_udc *dev) { - debugfs_remove(debugfs_lookup(dev_name(dev->dev), usb_debug_root)); + debugfs_lookup_and_remove(dev_name(dev->dev), usb_debug_root); }
#else /* !CONFIG_USB_GADGET_DEBUG_FS */
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit a91c99b1fe5c6f7e52fb932ad9e57ec7cfe913ec ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Kevin Cernekee cernekee@gmail.com Link: https://lore.kernel.org/r/20230202153235.2412790-9-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/bcm63xx_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index a9f07c59fc377..5c7dff6bc638f 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -2259,7 +2259,7 @@ static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) */ static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) { - debugfs_remove(debugfs_lookup(udc->gadget.name, usb_debug_root)); + debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root); }
/***********************************************************************
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit e3965acaf3739fde9d74ad82979b46d37c6c208f ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Jakob Koschel jakobkoschel@gmail.com Cc: Miaoqian Lin linmq006@gmail.com Acked-by: Vladimir Zapolskiy vz@mleia.com Link: https://lore.kernel.org/r/20230202153235.2412790-10-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/lpc32xx_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 865de8db998a9..ec0d3d74d66e2 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -532,7 +532,7 @@ static void create_debug_file(struct lpc32xx_udc *udc)
static void remove_debug_file(struct lpc32xx_udc *udc) { - debugfs_remove(debugfs_lookup(debug_filename, NULL)); + debugfs_lookup_and_remove(debug_filename, NULL); }
#else
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 7a038a681b7df78362d9fc7013e5395a694a9d3a ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Daniel Mack daniel@zonque.org Cc: Haojian Zhuang haojian.zhuang@gmail.com Cc: Robert Jarzmik robert.jarzmik@free.fr Link: https://lore.kernel.org/r/20230202153235.2412790-11-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/pxa25x_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c index a09ec1d826b21..e4d2ab5768ba2 100644 --- a/drivers/usb/gadget/udc/pxa25x_udc.c +++ b/drivers/usb/gadget/udc/pxa25x_udc.c @@ -1341,7 +1341,7 @@ DEFINE_SHOW_ATTRIBUTE(udc_debug); debugfs_create_file(dev->gadget.name, \ S_IRUGO, NULL, dev, &udc_debug_fops); \ } while (0) -#define remove_debug_files(dev) debugfs_remove(debugfs_lookup(dev->gadget.name, NULL)) +#define remove_debug_files(dev) debugfs_lookup_and_remove(dev->gadget.name, NULL)
#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 7a6952fa0366d4408eb8695af1a0578c39ec718a ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Daniel Mack daniel@zonque.org Cc: Haojian Zhuang haojian.zhuang@gmail.com Cc: Robert Jarzmik robert.jarzmik@free.fr Link: https://lore.kernel.org/r/20230202153235.2412790-12-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/pxa27x_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index f4b7a2a3e7114..282b114f382f8 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -215,7 +215,7 @@ static void pxa_init_debugfs(struct pxa_udc *udc)
static void pxa_cleanup_debugfs(struct pxa_udc *udc) { - debugfs_remove(debugfs_lookup(udc->gadget.name, usb_debug_root)); + debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root); }
#else
From: Kees Cook keescook@chromium.org
[ Upstream commit 0fbd2cda92cdb00f72080665554a586f88bca821 ]
Walking the dram->cs array was seen as accesses beyond the first array item by the compiler. Instead, use the array index directly. This allows for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen with GCC 13 with -fstrict-flex-arrays:
In function 'xhci_mvebu_mbus_config', inlined from 'xhci_mvebu_mbus_init_quirk' at ../drivers/usb/host/xhci-mvebu.c:66:2: ../drivers/usb/host/xhci-mvebu.c:37:28: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=] 37 | writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | | ~~^~~~~~
Cc: Mathias Nyman mathias.nyman@intel.com Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20230204183651.never.663-kees@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/xhci-mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c index 8ca1a235d1645..eabccf25796b2 100644 --- a/drivers/usb/host/xhci-mvebu.c +++ b/drivers/usb/host/xhci-mvebu.c @@ -33,7 +33,7 @@ static void xhci_mvebu_mbus_config(void __iomem *base,
/* Program each DRAM CS in a seperate window */ for (win = 0; win < dram->num_cs; win++) { - const struct mbus_dram_window *cs = dram->cs + win; + const struct mbus_dram_window *cs = &dram->cs[win];
writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | (dram->mbus_dram_target_id << 4) | 1,
From: Kees Cook keescook@chromium.org
[ Upstream commit ce33e64c1788912976b61314b56935abd4bc97ef ]
The allocation of PageBuffer is 512 bytes in size, but the dereferencing of struct ms_bootblock_idi (also size 512) happens at a calculated offset within the allocation, which means the object could potentially extend beyond the end of the allocation. Avoid this case by just allocating enough space to catch any accesses beyond the end. Seen with GCC 13:
../drivers/usb/storage/ene_ub6250.c: In function 'ms_lib_process_bootblock': ../drivers/usb/storage/ene_ub6250.c:1050:44: warning: array subscript 'struct ms_bootblock_idi[0]' is partly outside array bounds of 'unsigned char[512]' [-Warray-bounds=] 1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) | ^~ ../include/uapi/linux/byteorder/little_endian.h:37:51: note: in definition of macro '__le16_to_cpu' 37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ ../drivers/usb/storage/ene_ub6250.c:1050:29: note: in expansion of macro 'le16_to_cpu' 1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) | ^~~~~~~~~~~ In file included from ../drivers/usb/storage/ene_ub6250.c:5: In function 'kmalloc', inlined from 'ms_lib_process_bootblock' at ../drivers/usb/storage/ene_ub6250.c:942:15: ../include/linux/slab.h:580:24: note: at offset [256, 512] into object of size 512 allocated by 'kmalloc_trace' 580 | return kmalloc_trace( | ^~~~~~~~~~~~~~ 581 | kmalloc_caches[kmalloc_type(flags)][index], | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 582 | flags, size); | ~~~~~~~~~~~~
Cc: Alan Stern stern@rowland.harvard.edu Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20230204183546.never.849-kees@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/storage/ene_ub6250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 6012603f3630e..97c66c0d91f4d 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -939,7 +939,7 @@ static int ms_lib_process_bootblock(struct us_data *us, u16 PhyBlock, u8 *PageDa struct ms_lib_type_extdat ExtraData; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- PageBuffer = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL); + PageBuffer = kzalloc(MS_BYTES_PER_PAGE * 2, GFP_KERNEL); if (PageBuffer == NULL) return (u32)-1;
From: Daniel Scally dan.scally@ideasonboard.com
[ Upstream commit e16cab9c1596e251761d2bfb5e1467950d616963 ]
The color matching descriptors defined in the UVC Specification contain 3 fields with discrete numeric values representing particular settings. Enumerate those values so that later code setting them can be more readable.
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Daniel Scally dan.scally@ideasonboard.com Link: https://lore.kernel.org/r/20230202114142.300858-2-dan.scally@ideasonboard.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/uapi/linux/usb/video.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h index bfdae12cdacf8..c58854fb7d94a 100644 --- a/include/uapi/linux/usb/video.h +++ b/include/uapi/linux/usb/video.h @@ -179,6 +179,36 @@ #define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) #define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4)
+/* 3.9.2.6 Color Matching Descriptor Values */ +enum uvc_color_primaries_values { + UVC_COLOR_PRIMARIES_UNSPECIFIED, + UVC_COLOR_PRIMARIES_BT_709_SRGB, + UVC_COLOR_PRIMARIES_BT_470_2_M, + UVC_COLOR_PRIMARIES_BT_470_2_B_G, + UVC_COLOR_PRIMARIES_SMPTE_170M, + UVC_COLOR_PRIMARIES_SMPTE_240M, +}; + +enum uvc_transfer_characteristics_values { + UVC_TRANSFER_CHARACTERISTICS_UNSPECIFIED, + UVC_TRANSFER_CHARACTERISTICS_BT_709, + UVC_TRANSFER_CHARACTERISTICS_BT_470_2_M, + UVC_TRANSFER_CHARACTERISTICS_BT_470_2_B_G, + UVC_TRANSFER_CHARACTERISTICS_SMPTE_170M, + UVC_TRANSFER_CHARACTERISTICS_SMPTE_240M, + UVC_TRANSFER_CHARACTERISTICS_LINEAR, + UVC_TRANSFER_CHARACTERISTICS_SRGB, +}; + +enum uvc_matrix_coefficients { + UVC_MATRIX_COEFFICIENTS_UNSPECIFIED, + UVC_MATRIX_COEFFICIENTS_BT_709, + UVC_MATRIX_COEFFICIENTS_FCC, + UVC_MATRIX_COEFFICIENTS_BT_470_2_B_G, + UVC_MATRIX_COEFFICIENTS_SMPTE_170M, + UVC_MATRIX_COEFFICIENTS_SMPTE_240M, +}; + /* ------------------------------------------------------------------------ * UVC structures */
From: Daniel Scally dan.scally@ideasonboard.com
[ Upstream commit b3c839bd8a07d303bc59a900d55dd35c7826562c ]
At the moment, the UVC function graph is hardcoded IT -> PU -> OT. To add XU support we need the ability to insert the XU descriptors into the chain. To facilitate that, make the output terminal's bSourceID attribute writeable so that we can configure its source.
Signed-off-by: Daniel Scally dan.scally@ideasonboard.com Link: https://lore.kernel.org/r/20230206161802.892954-2-dan.scally@ideasonboard.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../ABI/testing/configfs-usb-gadget-uvc | 2 +- drivers/usb/gadget/function/uvc_configfs.c | 59 ++++++++++++++++++- 2 files changed, 59 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc index 889ed45be4ca6..2d5a5913b5f28 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc @@ -51,7 +51,7 @@ Date: Dec 2014 KernelVersion: 4.0 Description: Default output terminal descriptors
- All attributes read only: + All attributes read only except bSourceID:
============== ============================================= iTerminal index of string descriptor diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 77d64031aa9c2..9a285592a947c 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -505,11 +505,68 @@ UVC_ATTR_RO(uvcg_default_output_, cname, aname) UVCG_DEFAULT_OUTPUT_ATTR(b_terminal_id, bTerminalID, 8); UVCG_DEFAULT_OUTPUT_ATTR(w_terminal_type, wTerminalType, 16); UVCG_DEFAULT_OUTPUT_ATTR(b_assoc_terminal, bAssocTerminal, 8); -UVCG_DEFAULT_OUTPUT_ATTR(b_source_id, bSourceID, 8); UVCG_DEFAULT_OUTPUT_ATTR(i_terminal, iTerminal, 8);
#undef UVCG_DEFAULT_OUTPUT_ATTR
+static ssize_t uvcg_default_output_b_source_id_show(struct config_item *item, + char *page) +{ + struct config_group *group = to_config_group(item); + struct f_uvc_opts *opts; + struct config_item *opts_item; + struct mutex *su_mutex = &group->cg_subsys->su_mutex; + struct uvc_output_terminal_descriptor *cd; + int result; + + mutex_lock(su_mutex); /* for navigating configfs hierarchy */ + + opts_item = group->cg_item.ci_parent->ci_parent-> + ci_parent->ci_parent; + opts = to_f_uvc_opts(opts_item); + cd = &opts->uvc_output_terminal; + + mutex_lock(&opts->lock); + result = sprintf(page, "%u\n", le8_to_cpu(cd->bSourceID)); + mutex_unlock(&opts->lock); + + mutex_unlock(su_mutex); + + return result; +} + +static ssize_t uvcg_default_output_b_source_id_store(struct config_item *item, + const char *page, size_t len) +{ + struct config_group *group = to_config_group(item); + struct f_uvc_opts *opts; + struct config_item *opts_item; + struct mutex *su_mutex = &group->cg_subsys->su_mutex; + struct uvc_output_terminal_descriptor *cd; + int result; + u8 num; + + mutex_lock(su_mutex); /* for navigating configfs hierarchy */ + + opts_item = group->cg_item.ci_parent->ci_parent-> + ci_parent->ci_parent; + opts = to_f_uvc_opts(opts_item); + cd = &opts->uvc_output_terminal; + + result = kstrtou8(page, 0, &num); + if (result) + return result; + + mutex_lock(&opts->lock); + cd->bSourceID = num; + mutex_unlock(&opts->lock); + + mutex_unlock(su_mutex); + + return len; +} +UVC_ATTR(uvcg_default_output_, b_source_id, bSourceID); + static struct configfs_attribute *uvcg_default_output_attrs[] = { &uvcg_default_output_attr_b_terminal_id, &uvcg_default_output_attr_w_terminal_type,
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit 08f0a15ee8adb4846b08ca5d5c175fbf0f652bc9 ]
After division the extra resource space per hotplug bridge may not be aligned according to the window alignment, so align it before passing it down for further distribution.
Link: https://lore.kernel.org/r/20230131092405.29121-2-mika.westerberg@linux.intel... Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/setup-bus.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 2ce636937c6ea..4a6b698b5dd10 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -2004,6 +2004,7 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus, * resource space between hotplug bridges. */ for_each_pci_bridge(dev, bus) { + struct resource *res; struct pci_bus *b;
b = dev->subordinate; @@ -2015,16 +2016,28 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus, * hotplug-capable downstream ports taking alignment into * account. */ - io.end = io.start + io_per_hp - 1; - mmio.end = mmio.start + mmio_per_hp - 1; - mmio_pref.end = mmio_pref.start + mmio_pref_per_hp - 1; + res = &dev->resource[PCI_BRIDGE_IO_WINDOW]; + align = pci_resource_alignment(dev, res); + io.end = align ? io.start + ALIGN_DOWN(io_per_hp, align) - 1 + : io.start + io_per_hp - 1; + + res = &dev->resource[PCI_BRIDGE_MEM_WINDOW]; + align = pci_resource_alignment(dev, res); + mmio.end = align ? mmio.start + ALIGN_DOWN(mmio_per_hp, align) - 1 + : mmio.start + mmio_per_hp - 1; + + res = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW]; + align = pci_resource_alignment(dev, res); + mmio_pref.end = align ? mmio_pref.start + + ALIGN_DOWN(mmio_pref_per_hp, align) - 1 + : mmio_pref.start + mmio_pref_per_hp - 1;
pci_bus_distribute_available_resources(b, add_list, io, mmio, mmio_pref);
- io.start += io_per_hp; - mmio.start += mmio_per_hp; - mmio_pref.start += mmio_pref_per_hp; + io.start += io.end + 1; + mmio.start += mmio.end + 1; + mmio_pref.start += mmio_pref.end + 1; } }
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit 9db0b9b6a14249ef65a5f1e5e3b37762af96f425 ]
A PCI bridge may reside on a bus with other devices as well. The resource distribution code does not take this into account and therefore it expands the bridge resource windows too much, not leaving space for the other devices (or functions of a multifunction device). This leads to an issue that Jonathan reported when running QEMU with the following topology (QEMU parameters):
-device pcie-root-port,port=0,id=root_port13,chassis=0,slot=2 \ -device x3130-upstream,id=sw1,bus=root_port13,multifunction=on \ -device e1000,bus=root_port13,addr=0.1 \ -device xio3130-downstream,id=fun1,bus=sw1,chassis=0,slot=3 \ -device e1000,bus=fun1
The first e1000 NIC here is another function in the switch upstream port. This leads to following errors:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04] pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04] pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000] e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Fix this by taking into account bridge windows, device BARs and SR-IOV PF BARs on the bus (PF BARs include space for VF BARS so only account PF BARs), including the ones belonging to bridges themselves if it has any.
Link: https://lore.kernel.org/linux-pci/20221014124553.0000696f@huawei.com/ Link: https://lore.kernel.org/linux-pci/6053736d-1923-41e7-def9-7585ce1772d9@ixsys... Link: https://lore.kernel.org/r/20230131092405.29121-3-mika.westerberg@linux.intel... Reported-by: Jonathan Cameron Jonathan.Cameron@huawei.com Reported-by: Alexander Motin mav@ixsystems.com Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/setup-bus.c | 176 ++++++++++++++++++++++++---------------- 1 file changed, 106 insertions(+), 70 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 4a6b698b5dd10..16d291e10627b 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1878,12 +1878,67 @@ static void adjust_bridge_window(struct pci_dev *bridge, struct resource *res, add_size = size - new_size; pci_dbg(bridge, "bridge window %pR shrunken by %pa\n", res, &add_size); + } else { + return; }
res->end = res->start + new_size - 1; remove_from_list(add_list, res); }
+static void remove_dev_resource(struct resource *avail, struct pci_dev *dev, + struct resource *res) +{ + resource_size_t size, align, tmp; + + size = resource_size(res); + if (!size) + return; + + align = pci_resource_alignment(dev, res); + align = align ? ALIGN(avail->start, align) - avail->start : 0; + tmp = align + size; + avail->start = min(avail->start + tmp, avail->end + 1); +} + +static void remove_dev_resources(struct pci_dev *dev, struct resource *io, + struct resource *mmio, + struct resource *mmio_pref) +{ + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *res = &dev->resource[i]; + + if (resource_type(res) == IORESOURCE_IO) { + remove_dev_resource(io, dev, res); + } else if (resource_type(res) == IORESOURCE_MEM) { + + /* + * Make sure prefetchable memory is reduced from + * the correct resource. Specifically we put 32-bit + * prefetchable memory in non-prefetchable window + * if there is an 64-bit pretchable window. + * + * See comments in __pci_bus_size_bridges() for + * more information. + */ + if ((res->flags & IORESOURCE_PREFETCH) && + ((res->flags & IORESOURCE_MEM_64) == + (mmio_pref->flags & IORESOURCE_MEM_64))) + remove_dev_resource(mmio_pref, dev, res); + else + remove_dev_resource(mmio, dev, res); + } + } +} + +/* + * io, mmio and mmio_pref contain the total amount of bridge window space + * available. This includes the minimal space needed to cover all the + * existing devices on the bus and the possible extra space that can be + * shared with the bridges. + */ static void pci_bus_distribute_available_resources(struct pci_bus *bus, struct list_head *add_list, struct resource io, @@ -1893,7 +1948,7 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus, unsigned int normal_bridges = 0, hotplug_bridges = 0; struct resource *io_res, *mmio_res, *mmio_pref_res; struct pci_dev *dev, *bridge = bus->self; - resource_size_t io_per_hp, mmio_per_hp, mmio_pref_per_hp, align; + resource_size_t io_per_b, mmio_per_b, mmio_pref_per_b, align;
io_res = &bridge->resource[PCI_BRIDGE_IO_WINDOW]; mmio_res = &bridge->resource[PCI_BRIDGE_MEM_WINDOW]; @@ -1937,100 +1992,81 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus, normal_bridges++; }
- /* - * There is only one bridge on the bus so it gets all available - * resources which it can then distribute to the possible hotplug - * bridges below. - */ - if (hotplug_bridges + normal_bridges == 1) { - dev = list_first_entry(&bus->devices, struct pci_dev, bus_list); - if (dev->subordinate) - pci_bus_distribute_available_resources(dev->subordinate, - add_list, io, mmio, mmio_pref); - return; - } - - if (hotplug_bridges == 0) + if (!(hotplug_bridges + normal_bridges)) return;
/* - * Calculate the total amount of extra resource space we can - * pass to bridges below this one. This is basically the - * extra space reduced by the minimal required space for the - * non-hotplug bridges. + * Calculate the amount of space we can forward from "bus" to any + * downstream buses, i.e., the space left over after assigning the + * BARs and windows on "bus". */ - for_each_pci_bridge(dev, bus) { - resource_size_t used_size; - struct resource *res; - - if (dev->is_hotplug_bridge) - continue; - - /* - * Reduce the available resource space by what the - * bridge and devices below it occupy. - */ - res = &dev->resource[PCI_BRIDGE_IO_WINDOW]; - align = pci_resource_alignment(dev, res); - align = align ? ALIGN(io.start, align) - io.start : 0; - used_size = align + resource_size(res); - if (!res->parent) - io.start = min(io.start + used_size, io.end + 1); - - res = &dev->resource[PCI_BRIDGE_MEM_WINDOW]; - align = pci_resource_alignment(dev, res); - align = align ? ALIGN(mmio.start, align) - mmio.start : 0; - used_size = align + resource_size(res); - if (!res->parent) - mmio.start = min(mmio.start + used_size, mmio.end + 1); - - res = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW]; - align = pci_resource_alignment(dev, res); - align = align ? ALIGN(mmio_pref.start, align) - - mmio_pref.start : 0; - used_size = align + resource_size(res); - if (!res->parent) - mmio_pref.start = min(mmio_pref.start + used_size, - mmio_pref.end + 1); + list_for_each_entry(dev, &bus->devices, bus_list) { + if (!dev->is_virtfn) + remove_dev_resources(dev, &io, &mmio, &mmio_pref); }
- io_per_hp = div64_ul(resource_size(&io), hotplug_bridges); - mmio_per_hp = div64_ul(resource_size(&mmio), hotplug_bridges); - mmio_pref_per_hp = div64_ul(resource_size(&mmio_pref), - hotplug_bridges); - /* - * Go over devices on this bus and distribute the remaining - * resource space between hotplug bridges. + * If there is at least one hotplug bridge on this bus it gets all + * the extra resource space that was left after the reductions + * above. + * + * If there are no hotplug bridges the extra resource space is + * split between non-hotplug bridges. This is to allow possible + * hotplug bridges below them to get the extra space as well. */ + if (hotplug_bridges) { + io_per_b = div64_ul(resource_size(&io), hotplug_bridges); + mmio_per_b = div64_ul(resource_size(&mmio), hotplug_bridges); + mmio_pref_per_b = div64_ul(resource_size(&mmio_pref), + hotplug_bridges); + } else { + io_per_b = div64_ul(resource_size(&io), normal_bridges); + mmio_per_b = div64_ul(resource_size(&mmio), normal_bridges); + mmio_pref_per_b = div64_ul(resource_size(&mmio_pref), + normal_bridges); + } + for_each_pci_bridge(dev, bus) { struct resource *res; struct pci_bus *b;
b = dev->subordinate; - if (!b || !dev->is_hotplug_bridge) + if (!b) continue; + if (hotplug_bridges && !dev->is_hotplug_bridge) + continue; + + res = &dev->resource[PCI_BRIDGE_IO_WINDOW];
/* - * Distribute available extra resources equally between - * hotplug-capable downstream ports taking alignment into - * account. + * Make sure the split resource space is properly aligned + * for bridge windows (align it down to avoid going above + * what is available). */ - res = &dev->resource[PCI_BRIDGE_IO_WINDOW]; align = pci_resource_alignment(dev, res); - io.end = align ? io.start + ALIGN_DOWN(io_per_hp, align) - 1 - : io.start + io_per_hp - 1; + io.end = align ? io.start + ALIGN_DOWN(io_per_b, align) - 1 + : io.start + io_per_b - 1; + + /* + * The x_per_b holds the extra resource space that can be + * added for each bridge but there is the minimal already + * reserved as well so adjust x.start down accordingly to + * cover the whole space. + */ + io.start -= resource_size(res);
res = &dev->resource[PCI_BRIDGE_MEM_WINDOW]; align = pci_resource_alignment(dev, res); - mmio.end = align ? mmio.start + ALIGN_DOWN(mmio_per_hp, align) - 1 - : mmio.start + mmio_per_hp - 1; + mmio.end = align ? mmio.start + ALIGN_DOWN(mmio_per_b, align) - 1 + : mmio.start + mmio_per_b - 1; + mmio.start -= resource_size(res);
res = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW]; align = pci_resource_alignment(dev, res); mmio_pref.end = align ? mmio_pref.start + - ALIGN_DOWN(mmio_pref_per_hp, align) - 1 - : mmio_pref.start + mmio_pref_per_hp - 1; + ALIGN_DOWN(mmio_pref_per_b, align) - 1 + : mmio_pref.start + mmio_pref_per_b - 1; + mmio_pref.start -= resource_size(res);
pci_bus_distribute_available_resources(b, add_list, io, mmio, mmio_pref);
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 04a189c720aa2b6091442113ce9b9bc93552dff8 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20230202141221.2293012-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/pch_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 49bc5a4b28327..e783a4225bf04 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1821,7 +1821,7 @@ static void pch_uart_exit_port(struct eg20t_port *priv) char name[32];
snprintf(name, sizeof(name), "uart%d_regs", priv->port.line); - debugfs_remove(debugfs_lookup(name, NULL)); + debugfs_lookup_and_remove(name, NULL); uart_remove_one_port(&pch_uart_driver, &priv->port); free_page((unsigned long)priv->rxbuf.buf); }
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 209cdbd07cfaa4b7385bad4eeb47e5ec1887d33d ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Nadav Amit namit@vmware.com Cc: VMware PV-Drivers Reviewers pv-drivers@vmware.com Cc: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20230202141100.2291188-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/vmw_balloon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index f1d8ba6d48574..dab8ad9fed6b3 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -1711,7 +1711,7 @@ static void __init vmballoon_debugfs_init(struct vmballoon *b) static void __exit vmballoon_debugfs_exit(struct vmballoon *b) { static_key_disable(&balloon_stat_enabled.key); - debugfs_remove(debugfs_lookup("vmmemctl", NULL)); + debugfs_lookup_and_remove("vmmemctl", NULL); kfree(b->stats); b->stats = NULL; }
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 8deb87b1e810dd558371e88ffd44339fbef27870 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: "Rafael J. Wysocki" rafael@kernel.org Link: https://lore.kernel.org/r/20230202141621.2296458-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/component.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/component.c b/drivers/base/component.c index 870485cbbb87c..058f1a2cb2a9a 100644 --- a/drivers/base/component.c +++ b/drivers/base/component.c @@ -130,7 +130,7 @@ static void component_master_debugfs_add(struct master *m)
static void component_master_debugfs_del(struct master *m) { - debugfs_remove(debugfs_lookup(dev_name(m->parent), component_debugfs_dir)); + debugfs_lookup_and_remove(dev_name(m->parent), component_debugfs_dir); }
#else
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 36c893d3a759ae7c91ee7d4871ebfc7504f08c40 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: "Rafael J. Wysocki" rafael@kernel.org Link: https://lore.kernel.org/r/20230202141621.2296458-2-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/dd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 060348125635b..9cbf086fe5524 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -352,7 +352,7 @@ late_initcall(deferred_probe_initcall);
static void __exit deferred_probe_exit(void) { - debugfs_remove_recursive(debugfs_lookup("devices_deferred", NULL)); + debugfs_lookup_and_remove("devices_deferred", NULL); } __exitcall(deferred_probe_exit);
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 5f5139974c2030e0937d3ae01f17da1238281f11 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/time/test_udelay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/time/test_udelay.c b/kernel/time/test_udelay.c index 13b11eb62685e..20d5df631570e 100644 --- a/kernel/time/test_udelay.c +++ b/kernel/time/test_udelay.c @@ -149,7 +149,7 @@ module_init(udelay_test_init); static void __exit udelay_test_exit(void) { mutex_lock(&udelay_test_lock); - debugfs_remove(debugfs_lookup(DEBUGFS_FILENAME, NULL)); + debugfs_lookup_and_remove(DEBUGFS_FILENAME, NULL); mutex_unlock(&udelay_test_lock); }
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit a0bc3f78d0fffa8be1a73bf945a43bfe1c2871c1 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: "Rafael J. Wysocki" rafael@kernel.org Cc: Pavel Machek pavel@ucw.cz Cc: Len Brown len.brown@intel.com Link: https://lore.kernel.org/r/20230202151515.2309543-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/power/energy_model.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c index 97e62469a6b32..1b902f986f91c 100644 --- a/kernel/power/energy_model.c +++ b/kernel/power/energy_model.c @@ -85,10 +85,7 @@ static void em_debug_create_pd(struct device *dev)
static void em_debug_remove_pd(struct device *dev) { - struct dentry *debug_dir; - - debug_dir = debugfs_lookup(dev_name(dev), rootdir); - debugfs_remove_recursive(debug_dir); + debugfs_lookup_and_remove(dev_name(dev), rootdir); }
static int __init em_debug_init(void)
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit 2bb3669f576559db273efe49e0e69f82450efbca ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Cc: Andrew Morton akpm@linux-foundation.org Reviewed-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20230202151633.2310897-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/fail_function.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/kernel/fail_function.c b/kernel/fail_function.c index 60dc825ecc2b3..d81ec84765811 100644 --- a/kernel/fail_function.c +++ b/kernel/fail_function.c @@ -163,10 +163,7 @@ static void fei_debugfs_add_attr(struct fei_attr *attr)
static void fei_debugfs_remove_attr(struct fei_attr *attr) { - struct dentry *dir; - - dir = debugfs_lookup(attr->kp.symbol_name, fei_debugfs_dir); - debugfs_remove_recursive(dir); + debugfs_lookup_and_remove(attr->kp.symbol_name, fei_debugfs_dir); }
static int fei_kprobe_handler(struct kprobe *kp, struct pt_regs *regs)
From: Huacai Chen chenhuacai@loongson.cn
[ Upstream commit c768f8c5f40fcdc6f058cc2f02592163d6c6716c ]
Loongson-2K SOC and LS7A2000 chipset add new PCI IDs that need MRRS quirk. Add them.
Link: https://lore.kernel.org/r/20230211023321.3530080-1-chenhuacai@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-loongson.c | 33 +++++++++++++++++++-------- 1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index dc7b4e4293ced..e73e18a73833b 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -13,9 +13,14 @@ #include "../pci.h"
/* Device IDs */ -#define DEV_PCIE_PORT_0 0x7a09 -#define DEV_PCIE_PORT_1 0x7a19 -#define DEV_PCIE_PORT_2 0x7a29 +#define DEV_LS2K_PCIE_PORT0 0x1a05 +#define DEV_LS7A_PCIE_PORT0 0x7a09 +#define DEV_LS7A_PCIE_PORT1 0x7a19 +#define DEV_LS7A_PCIE_PORT2 0x7a29 +#define DEV_LS7A_PCIE_PORT3 0x7a39 +#define DEV_LS7A_PCIE_PORT4 0x7a49 +#define DEV_LS7A_PCIE_PORT5 0x7a59 +#define DEV_LS7A_PCIE_PORT6 0x7a69
#define DEV_LS2K_APB 0x7a02 #define DEV_LS7A_CONF 0x7a10 @@ -38,11 +43,11 @@ static void bridge_class_quirk(struct pci_dev *dev) dev->class = PCI_CLASS_BRIDGE_PCI << 8; } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_0, bridge_class_quirk); + DEV_LS7A_PCIE_PORT0, bridge_class_quirk); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_1, bridge_class_quirk); + DEV_LS7A_PCIE_PORT1, bridge_class_quirk); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_2, bridge_class_quirk); + DEV_LS7A_PCIE_PORT2, bridge_class_quirk);
static void system_bus_quirk(struct pci_dev *pdev) { @@ -72,11 +77,21 @@ static void loongson_mrrs_quirk(struct pci_dev *pdev) bridge->no_inc_mrrs = 1; } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_0, loongson_mrrs_quirk); + DEV_LS2K_PCIE_PORT0, loongson_mrrs_quirk); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_1, loongson_mrrs_quirk); + DEV_LS7A_PCIE_PORT0, loongson_mrrs_quirk); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_2, loongson_mrrs_quirk); + DEV_LS7A_PCIE_PORT1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT2, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT3, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT4, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT5, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT6, loongson_mrrs_quirk);
static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where)
From: Mengyuan Lou mengyuanlou@net-swift.com
[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ]
Wangxun has verified there is no peer-to-peer between functions for the below selection of SFxxx, RP1000 and RP2000 NICS. They may be multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com Signed-off-by: Mengyuan Lou mengyuanlou@net-swift.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 22 ++++++++++++++++++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 24 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a531064233f98..00d7d1738992c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4823,6 +4823,26 @@ static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags) PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); }
+/* + * Wangxun 10G/1G NICs have no ACS capability, and on multi-function + * devices, peer-to-peer transactions are not be used between the functions. + * So add an ACS quirk for below devices to isolate functions. + * SFxxx 1G NICs(em). + * RP1000/RP2000 10G NICs(sp). + */ +static int pci_quirk_wangxun_nic_acs(struct pci_dev *dev, u16 acs_flags) +{ + switch (dev->device) { + case 0x0100 ... 0x010F: + case 0x1001: + case 0x2001: + return pci_acs_ctrl_enabled(acs_flags, + PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); + } + + return false; +} + static const struct pci_dev_acs_enabled { u16 vendor; u16 device; @@ -4968,6 +4988,8 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs }, /* Zhaoxin Root/Downstream Ports */ { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs }, + /* Wangxun nics */ + { PCI_VENDOR_ID_WANGXUN, PCI_ANY_ID, pci_quirk_wangxun_nic_acs }, { 0 } };
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 04f44a4694a2e..4853538bf1561 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -3012,6 +3012,8 @@ #define PCI_DEVICE_ID_INTEL_VMD_9A0B 0x9a0b #define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
+#define PCI_VENDOR_ID_WANGXUN 0x8088 + #define PCI_VENDOR_ID_SCALEMP 0x8686 #define PCI_DEVICE_ID_SCALEMP_VSMP_CTL 0x1010
From: Jiapeng Chong jiapeng.chong@linux.alibaba.com
[ Upstream commit f765c59c5a72546a2d74a92ae5d0eb0329d8e247 ]
The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int.
./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0.
Reported-by: Abaci Robot abaci@linux.alibaba.com Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/rockchip/phy-rockchip-typec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index d2bbdc96a1672..bdfb14d1dd68c 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -808,9 +808,8 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) struct extcon_dev *edev = tcphy->extcon; union extcon_property_value property; unsigned int id; - bool ufp, dp; u8 mode; - int ret; + int ret, ufp, dp;
if (!edev) return MODE_DFP_USB;
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 827c32d0df4bbe0d1c47d79f6a5eabfe9ac75216 ]
The response_buf was declared much larger (128 entries) than the number of responses that could ever be written into it. The Cadence IP is configurable up to a maximum of 32 entries, and the datasheet says that RX_FIFO_AVAIL can be 2 larger than this. So allow up to 34 responses.
Also add checking in cdns_read_response() to prevent overflowing reponse_buf if RX_FIFO_AVAIL contains an unexpectedly large number.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221202161812.4186897-3-rf@opensource.cirrus.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/cadence_master.c | 7 +++++++ drivers/soundwire/cadence_master.h | 13 ++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 18d2f9b3e2010..b229e1e0d7d97 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -769,8 +769,15 @@ static void cdns_read_response(struct sdw_cdns *cdns) u32 num_resp, cmd_base; int i;
+ /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + }
cmd_base = CDNS_MCP_CMD_BASE;
diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index e587aede63bf0..e437a604429fa 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -8,6 +8,12 @@ #define SDW_CADENCE_GSYNC_KHZ 4 /* 4 kHz */ #define SDW_CADENCE_GSYNC_HZ (SDW_CADENCE_GSYNC_KHZ * 1000)
+/* + * The Cadence IP supports up to 32 entries in the FIFO, though implementations + * can configure the IP to have a smaller FIFO. + */ +#define CDNS_MCP_IP_MAX_CMD_LEN 32 + /** * struct sdw_cdns_pdi: PDI (Physical Data Interface) instance * @@ -119,7 +125,12 @@ struct sdw_cdns { struct sdw_bus bus; unsigned int instance;
- u32 response_buf[0x80]; + /* + * The datasheet says the RX FIFO AVAIL can be 2 entries more + * than the FIFO capacity, so allow for this. + */ + u32 response_buf[CDNS_MCP_IP_MAX_CMD_LEN + 2]; + struct completion tx_complete; struct sdw_defer *defer;
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 0603a47bd3a8f439d7844b841eee1819353063e0 ]
If wait_for_completion_timeout() times-out in _cdns_xfer_msg() it is possible that something could have been written to the RX FIFO. In this case, we should drain the RX FIFO so that anything in it doesn't carry over and mess up the next transfer.
Obviously, if we got to this state something went wrong, and we don't really know the state of everything. The cleanup in this situation cannot be bullet-proof but we should attempt to avoid breaking future transaction, if only to reduce the amount of error noise when debugging the failure from a kernel log.
Note that this patch only implements the draining for blocking (non-deferred) transfers. The deferred API doesn't have any proper handling of error conditions and would need some re-design before implementing cleanup. That is a task for a separate patch...
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221202161812.4186897-4-rf@opensource.cirrus.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/cadence_master.c | 50 ++++++++++++++++-------------- 1 file changed, 27 insertions(+), 23 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index b229e1e0d7d97..842e08c56796b 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -555,6 +555,29 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, return SDW_CMD_OK; }
+static void cdns_read_response(struct sdw_cdns *cdns) +{ + u32 num_resp, cmd_base; + int i; + + /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); + num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + } + + cmd_base = CDNS_MCP_CMD_BASE; + + for (i = 0; i < num_resp; i++) { + cdns->response_buf[i] = cdns_readl(cdns, cmd_base); + cmd_base += CDNS_MCP_CMD_WORD_LEN; + } +} + static enum sdw_command_response _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, int offset, int count, bool defer) @@ -596,6 +619,10 @@ _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, dev_err(cdns->dev, "IO transfer timed out, cmd %d device %d addr %x len %d\n", cmd, msg->dev_num, msg->addr, msg->len); msg->len = 0; + + /* Drain anything in the RX_FIFO */ + cdns_read_response(cdns); + return SDW_CMD_TIMEOUT; }
@@ -764,29 +791,6 @@ EXPORT_SYMBOL(cdns_reset_page_addr); * IRQ handling */
-static void cdns_read_response(struct sdw_cdns *cdns) -{ - u32 num_resp, cmd_base; - int i; - - /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ - BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); - - num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); - num_resp &= CDNS_MCP_RX_FIFO_AVAIL; - if (num_resp > ARRAY_SIZE(cdns->response_buf)) { - dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); - num_resp = ARRAY_SIZE(cdns->response_buf); - } - - cmd_base = CDNS_MCP_CMD_BASE; - - for (i = 0; i < num_resp; i++) { - cdns->response_buf[i] = cdns_readl(cdns, cmd_base); - cmd_base += CDNS_MCP_CMD_WORD_LEN; - } -} - static int cdns_update_slave_status(struct sdw_cdns *cdns, u64 slave_intstat) {
linux-stable-mirror@lists.linaro.org
-
Sasha Levin