From: Toke Høiland-Jørgensen toke@redhat.com

[ Upstream commit 94745807f3ebd379f23865e6dab196f220664179 ]

Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call.

The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.

Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen toke@redhat.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/hif_usb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index e5414435b1414..ab728a70ed279 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -716,8 +716,7 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb) }

resubmit: - skb_reset_tail_pointer(skb); - skb_trim(skb, 0); + __skb_set_length(skb, 0);

usb_anchor_urb(urb, &hif_dev->rx_submitted); ret = usb_submit_urb(urb, GFP_ATOMIC); @@ -754,8 +753,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) case -ESHUTDOWN: goto free_skb; default: - skb_reset_tail_pointer(skb); - skb_trim(skb, 0); + __skb_set_length(skb, 0);

goto resubmit; }

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit 311eea7e37c4c0b44b557d0c100860a03b4eab65 ]

Use the generic crypto_authenc_extractkeys helper instead of custom parsing code that is slightly broken. Also fix a number of memory leaks by moving memory allocation from setkey to init_tfm (setkey can be called multiple times over the life of a tfm).

Finally accept all hash key lengths by running the digest over extra-long keys.

Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- .../crypto/marvell/octeontx/otx_cptvf_algs.c | 261 +++++++----------- 1 file changed, 93 insertions(+), 168 deletions(-)

diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c index 1c2c870e887aa..f64b72398eced 100644 --- a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c +++ b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c @@ -17,7 +17,6 @@ #include <crypto/sha2.h> #include <crypto/xts.h> #include <crypto/scatterwalk.h> -#include <linux/rtnetlink.h> #include <linux/sort.h> #include <linux/module.h> #include "otx_cptvf.h" @@ -66,6 +65,8 @@ static struct cpt_device_table ae_devices = { .count = ATOMIC_INIT(0) };

+static struct otx_cpt_sdesc *alloc_sdesc(struct crypto_shash *alg); + static inline int get_se_device(struct pci_dev **pdev, int *cpu_num) { int count, ret = 0; @@ -515,44 +516,61 @@ static int cpt_aead_init(struct crypto_aead *tfm, u8 cipher_type, u8 mac_type) ctx->cipher_type = cipher_type; ctx->mac_type = mac_type;

+ switch (ctx->mac_type) { + case OTX_CPT_SHA1: + ctx->hashalg = crypto_alloc_shash("sha1", 0, 0); + break; + + case OTX_CPT_SHA256: + ctx->hashalg = crypto_alloc_shash("sha256", 0, 0); + break; + + case OTX_CPT_SHA384: + ctx->hashalg = crypto_alloc_shash("sha384", 0, 0); + break; + + case OTX_CPT_SHA512: + ctx->hashalg = crypto_alloc_shash("sha512", 0, 0); + break; + } + + if (IS_ERR(ctx->hashalg)) + return PTR_ERR(ctx->hashalg); + + crypto_aead_set_reqsize_dma(tfm, sizeof(struct otx_cpt_req_ctx)); + + if (!ctx->hashalg) + return 0; + /* * When selected cipher is NULL we use HMAC opcode instead of * FLEXICRYPTO opcode therefore we don't need to use HASH algorithms * for calculating ipad and opad */ if (ctx->cipher_type != OTX_CPT_CIPHER_NULL) { - switch (ctx->mac_type) { - case OTX_CPT_SHA1: - ctx->hashalg = crypto_alloc_shash("sha1", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; - - case OTX_CPT_SHA256: - ctx->hashalg = crypto_alloc_shash("sha256", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; + int ss = crypto_shash_statesize(ctx->hashalg);

- case OTX_CPT_SHA384: - ctx->hashalg = crypto_alloc_shash("sha384", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; + ctx->ipad = kzalloc(ss, GFP_KERNEL); + if (!ctx->ipad) { + crypto_free_shash(ctx->hashalg); + return -ENOMEM; + }

- case OTX_CPT_SHA512: - ctx->hashalg = crypto_alloc_shash("sha512", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; + ctx->opad = kzalloc(ss, GFP_KERNEL); + if (!ctx->opad) { + kfree(ctx->ipad); + crypto_free_shash(ctx->hashalg); + return -ENOMEM; } }

- crypto_aead_set_reqsize_dma(tfm, sizeof(struct otx_cpt_req_ctx)); + ctx->sdesc = alloc_sdesc(ctx->hashalg); + if (!ctx->sdesc) { + kfree(ctx->opad); + kfree(ctx->ipad); + crypto_free_shash(ctx->hashalg); + return -ENOMEM; + }

return 0; } @@ -608,8 +626,7 @@ static void otx_cpt_aead_exit(struct crypto_aead *tfm)

kfree(ctx->ipad); kfree(ctx->opad); - if (ctx->hashalg) - crypto_free_shash(ctx->hashalg); + crypto_free_shash(ctx->hashalg); kfree(ctx->sdesc); }

@@ -705,7 +722,7 @@ static inline void swap_data64(void *buf, u32 len) *dst = cpu_to_be64p(src); }

-static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad) +static int swap_pad(u8 mac_type, u8 *pad) { struct sha512_state *sha512; struct sha256_state *sha256; @@ -713,22 +730,19 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)

switch (mac_type) { case OTX_CPT_SHA1: - sha1 = (struct sha1_state *) in_pad; + sha1 = (struct sha1_state *)pad; swap_data32(sha1->state, SHA1_DIGEST_SIZE); - memcpy(out_pad, &sha1->state, SHA1_DIGEST_SIZE); break;

case OTX_CPT_SHA256: - sha256 = (struct sha256_state *) in_pad; + sha256 = (struct sha256_state *)pad; swap_data32(sha256->state, SHA256_DIGEST_SIZE); - memcpy(out_pad, &sha256->state, SHA256_DIGEST_SIZE); break;

case OTX_CPT_SHA384: case OTX_CPT_SHA512: - sha512 = (struct sha512_state *) in_pad; + sha512 = (struct sha512_state *)pad; swap_data64(sha512->state, SHA512_DIGEST_SIZE); - memcpy(out_pad, &sha512->state, SHA512_DIGEST_SIZE); break;

default: @@ -738,55 +752,53 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad) return 0; }

-static int aead_hmac_init(struct crypto_aead *cipher) +static int aead_hmac_init(struct crypto_aead *cipher, + struct crypto_authenc_keys *keys) { struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher); - int state_size = crypto_shash_statesize(ctx->hashalg); int ds = crypto_shash_digestsize(ctx->hashalg); int bs = crypto_shash_blocksize(ctx->hashalg); - int authkeylen = ctx->auth_key_len; + int authkeylen = keys->authkeylen; u8 *ipad = NULL, *opad = NULL; - int ret = 0, icount = 0; + int icount = 0; + int ret;

- ctx->sdesc = alloc_sdesc(ctx->hashalg); - if (!ctx->sdesc) - return -ENOMEM; + if (authkeylen > bs) { + ret = crypto_shash_digest(&ctx->sdesc->shash, keys->authkey, + authkeylen, ctx->key); + if (ret) + return ret; + authkeylen = ds; + } else + memcpy(ctx->key, keys->authkey, authkeylen);

- ctx->ipad = kzalloc(bs, GFP_KERNEL); - if (!ctx->ipad) { - ret = -ENOMEM; - goto calc_fail; - } + ctx->enc_key_len = keys->enckeylen; + ctx->auth_key_len = authkeylen;

- ctx->opad = kzalloc(bs, GFP_KERNEL); - if (!ctx->opad) { - ret = -ENOMEM; - goto calc_fail; - } + if (ctx->cipher_type == OTX_CPT_CIPHER_NULL) + return keys->enckeylen ? -EINVAL : 0;

- ipad = kzalloc(state_size, GFP_KERNEL); - if (!ipad) { - ret = -ENOMEM; - goto calc_fail; + switch (keys->enckeylen) { + case AES_KEYSIZE_128: + ctx->key_type = OTX_CPT_AES_128_BIT; + break; + case AES_KEYSIZE_192: + ctx->key_type = OTX_CPT_AES_192_BIT; + break; + case AES_KEYSIZE_256: + ctx->key_type = OTX_CPT_AES_256_BIT; + break; + default: + /* Invalid key length */ + return -EINVAL; }

- opad = kzalloc(state_size, GFP_KERNEL); - if (!opad) { - ret = -ENOMEM; - goto calc_fail; - } + memcpy(ctx->key + authkeylen, keys->enckey, keys->enckeylen);

- if (authkeylen > bs) { - ret = crypto_shash_digest(&ctx->sdesc->shash, ctx->key, - authkeylen, ipad); - if (ret) - goto calc_fail; - - authkeylen = ds; - } else { - memcpy(ipad, ctx->key, authkeylen); - } + ipad = ctx->ipad; + opad = ctx->opad;

+ memcpy(ipad, ctx->key, authkeylen); memset(ipad + authkeylen, 0, bs - authkeylen); memcpy(opad, ipad, bs);

@@ -804,7 +816,7 @@ static int aead_hmac_init(struct crypto_aead *cipher) crypto_shash_init(&ctx->sdesc->shash); crypto_shash_update(&ctx->sdesc->shash, ipad, bs); crypto_shash_export(&ctx->sdesc->shash, ipad); - ret = copy_pad(ctx->mac_type, ctx->ipad, ipad); + ret = swap_pad(ctx->mac_type, ipad); if (ret) goto calc_fail;

@@ -812,25 +824,9 @@ static int aead_hmac_init(struct crypto_aead *cipher) crypto_shash_init(&ctx->sdesc->shash); crypto_shash_update(&ctx->sdesc->shash, opad, bs); crypto_shash_export(&ctx->sdesc->shash, opad); - ret = copy_pad(ctx->mac_type, ctx->opad, opad); - if (ret) - goto calc_fail; - - kfree(ipad); - kfree(opad); - - return 0; + ret = swap_pad(ctx->mac_type, opad);

calc_fail: - kfree(ctx->ipad); - ctx->ipad = NULL; - kfree(ctx->opad); - ctx->opad = NULL; - kfree(ipad); - kfree(opad); - kfree(ctx->sdesc); - ctx->sdesc = NULL; - return ret; }

@@ -838,57 +834,15 @@ static int otx_cpt_aead_cbc_aes_sha_setkey(struct crypto_aead *cipher, const unsigned char *key, unsigned int keylen) { - struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher); - struct crypto_authenc_key_param *param; - int enckeylen = 0, authkeylen = 0; - struct rtattr *rta = (void *)key; - int status = -EINVAL; - - if (!RTA_OK(rta, keylen)) - goto badkey; - - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; - - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; - - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - if (keylen < enckeylen) - goto badkey; + struct crypto_authenc_keys authenc_keys; + int status;

- if (keylen > OTX_CPT_MAX_KEY_SIZE) - goto badkey; - - authkeylen = keylen - enckeylen; - memcpy(ctx->key, key, keylen); - - switch (enckeylen) { - case AES_KEYSIZE_128: - ctx->key_type = OTX_CPT_AES_128_BIT; - break; - case AES_KEYSIZE_192: - ctx->key_type = OTX_CPT_AES_192_BIT; - break; - case AES_KEYSIZE_256: - ctx->key_type = OTX_CPT_AES_256_BIT; - break; - default: - /* Invalid key length */ - goto badkey; - } - - ctx->enc_key_len = enckeylen; - ctx->auth_key_len = authkeylen; - - status = aead_hmac_init(cipher); + status = crypto_authenc_extractkeys(&authenc_keys, key, keylen); if (status) goto badkey;

- return 0; + status = aead_hmac_init(cipher, &authenc_keys); + badkey: return status; } @@ -897,36 +851,7 @@ static int otx_cpt_aead_ecb_null_sha_setkey(struct crypto_aead *cipher, const unsigned char *key, unsigned int keylen) { - struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher); - struct crypto_authenc_key_param *param; - struct rtattr *rta = (void *)key; - int enckeylen = 0; - - if (!RTA_OK(rta, keylen)) - goto badkey; - - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; - - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; - - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - if (enckeylen != 0) - goto badkey; - - if (keylen > OTX_CPT_MAX_KEY_SIZE) - goto badkey; - - memcpy(ctx->key, key, keylen); - ctx->enc_key_len = enckeylen; - ctx->auth_key_len = keylen; - return 0; -badkey: - return -EINVAL; + return otx_cpt_aead_cbc_aes_sha_setkey(cipher, key, keylen); }

static int otx_cpt_aead_gcm_aes_setkey(struct crypto_aead *cipher,

From: Aleksandr Mishin amishin@t-argos.ru

[ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ]

In ice_sched_add_root_node() and ice_sched_add_node() there are calls to devm_kcalloc() in order to allocate memory for array of pointers to 'ice_sched_node' structure. But incorrect types are used as sizeof() arguments in these calls (structures instead of pointers) which leads to over allocation of memory.

Adjust over allocation of memory by correcting types in devm_kcalloc() sizeof() arguments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Przemek Kitszel przemyslaw.kitszel@intel.com Signed-off-by: Aleksandr Mishin amishin@t-argos.ru Reviewed-by: Simon Horman horms@kernel.org Tested-by: Pucha Himasekhar Reddy himasekharx.reddy.pucha@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ice/ice_sched.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c index c0533d7b66b99..908bcd0738033 100644 --- a/drivers/net/ethernet/intel/ice/ice_sched.c +++ b/drivers/net/ethernet/intel/ice/ice_sched.c @@ -28,9 +28,8 @@ ice_sched_add_root_node(struct ice_port_info *pi, if (!root) return -ENOMEM;

- /* coverity[suspicious_sizeof] */ root->children = devm_kcalloc(ice_hw_to_dev(hw), hw->max_children[0], - sizeof(*root), GFP_KERNEL); + sizeof(*root->children), GFP_KERNEL); if (!root->children) { devm_kfree(ice_hw_to_dev(hw), root); return -ENOMEM; @@ -186,10 +185,9 @@ ice_sched_add_node(struct ice_port_info *pi, u8 layer, if (!node) return -ENOMEM; if (hw->max_children[layer]) { - /* coverity[suspicious_sizeof] */ node->children = devm_kcalloc(ice_hw_to_dev(hw), hw->max_children[layer], - sizeof(*node), GFP_KERNEL); + sizeof(*node->children), GFP_KERNEL); if (!node->children) { devm_kfree(ice_hw_to_dev(hw), node); return -ENOMEM;

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 1c7e1068a7c9c39ed27636db93e71911e0045419 ]

This shouldn't happen at all, since in station mode all MMPDUs go through the TXQ for the STA, and not this function. There may or may not be a race in mac80211 through which this might happen for some frames while a station is being added, but in that case we can also just drop the frame and pretend the STA didn't exist yet.

Also, the code is simply wrong since it uses deflink, and it's not easy to fix it since the mvmvif->ap_sta pointer cannot be used without the mutex, and perhaps the right link might not even be known.

Just drop the frame at that point instead of trying to fix it up.

Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb88... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index f973efbbc3795..c6264ff10d883 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -766,20 +766,10 @@ void iwl_mvm_mac_tx(struct ieee80211_hw *hw, if (ieee80211_is_mgmt(hdr->frame_control)) sta = NULL;

- /* If there is no sta, and it's not offchannel - send through AP */ + /* this shouldn't even happen: just drop */ if (!sta && info->control.vif->type == NL80211_IFTYPE_STATION && - !offchannel) { - struct iwl_mvm_vif *mvmvif = - iwl_mvm_vif_from_mac80211(info->control.vif); - u8 ap_sta_id = READ_ONCE(mvmvif->deflink.ap_sta_id); - - if (ap_sta_id < mvm->fw->ucode_capa.num_stations) { - /* mac80211 holds rcu read lock */ - sta = rcu_dereference(mvm->fw_id_to_mac_id[ap_sta_id]); - if (IS_ERR_OR_NULL(sta)) - goto drop; - } - } + !offchannel) + goto drop;

if (tmp_sta && !sta && link_id != IEEE80211_LINK_UNSPECIFIED && !ieee80211_is_probe_resp(hdr->frame_control)) {

From: Jeongjun Park aha310510@gmail.com

[ Upstream commit 0fa5e94a1811d68fbffa0725efe6d4ca62c03d12 ]

During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free.

Therefore, to solve this, you need to change it to list_for_each_entry_safe.

Signed-off-by: Jeongjun Park aha310510@gmail.com Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/hash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/xen-netback/hash.c b/drivers/net/xen-netback/hash.c index ff96f22648efd..45ddce35f6d2c 100644 --- a/drivers/net/xen-netback/hash.c +++ b/drivers/net/xen-netback/hash.c @@ -95,7 +95,7 @@ static u32 xenvif_new_hash(struct xenvif *vif, const u8 *data,

static void xenvif_flush_hash(struct xenvif *vif) { - struct xenvif_hash_cache_entry *entry; + struct xenvif_hash_cache_entry *entry, *n; unsigned long flags;

if (xenvif_hash_cache_size == 0) @@ -103,8 +103,7 @@ static void xenvif_flush_hash(struct xenvif *vif)

spin_lock_irqsave(&vif->hash.cache.lock, flags);

- list_for_each_entry_rcu(entry, &vif->hash.cache.list, link, - lockdep_is_held(&vif->hash.cache.lock)) { + list_for_each_entry_safe(entry, n, &vif->hash.cache.list, link) { list_del_rcu(&entry->link); vif->hash.cache.count--; kfree_rcu(entry, rcu);

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 5680cf8d34e1552df987e2f4bb1bff0b2a8c8b11 ]

Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info().

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.o... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index f75668c479351..616a2768e5048 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -933,6 +933,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) mac_cb->cpld_ctrl = NULL; } else { syscon = syscon_node_to_regmap(cpld_args.np); + of_node_put(cpld_args.np); if (IS_ERR_OR_NULL(syscon)) { dev_dbg(mac_cb->dev, "no cpld-syscon found!\n"); mac_cb->cpld_ctrl = NULL;

From: Seiji Nishikawa snishika@redhat.com

[ Upstream commit 0a2ed70a549e61c5181bad5db418d223b68ae932 ]

The kernel occasionally crashes in cpumask_clear_cpu(), which is called within exit_round_robin(), because when executing clear_bit(nr, addr) with nr set to 0xffffffff, the address calculation may cause misalignment within the memory, leading to access to an invalid memory address.

---------- BUG: unable to handle kernel paging request at ffffffffe0740618 ... CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1 ... RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad] Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31 RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? acpi_pad_add+0x120/0x120 [acpi_pad] kthread+0x10b/0x130 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x40 ... CR2: ffffffffe0740618

crash> dis -lr ffffffffc0726923 ... /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114 0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325 0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80 0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits>

crash> px tsk_in_cpu[14] $66 = 0xffffffff

crash> px 0xffffffffc072692c+0x19cf4 $99 = 0xffffffffc0740620

crash> sym 0xffffffffc0740620 ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad]

crash> px pad_busy_cpus_bits[0] $42 = 0xfffc0 ----------

To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling cpumask_clear_cpu() in exit_round_robin(), just as it is done in round_robin_cpu().

Signed-off-by: Seiji Nishikawa snishika@redhat.com Link: https://patch.msgid.link/20240825141352.25280-1-snishika@redhat.com [ rjw: Subject edit, avoid updates to the same value ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpi_pad.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 7a453c5ff303a..71e25c7989762 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -131,8 +131,10 @@ static void exit_round_robin(unsigned int tsk_index) { struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);

- cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus); - tsk_in_cpu[tsk_index] = -1; + if (tsk_in_cpu[tsk_index] != -1) { + cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus); + tsk_in_cpu[tsk_index] = -1; + } }

static unsigned int idle_pct = 5; /* percentage */

From: Armin Wolf W_Armin@gmx.de

[ Upstream commit e6169a8ffee8a012badd8c703716e761ce851b15 ]

ACPICA commit 1280045754264841b119a5ede96cd005bc09b5a7

If acpi_ps_get_next_field() fails, the previously created field list needs to be properly disposed before returning the status code.

Link: https://github.com/acpica/acpica/commit/12800457 Signed-off-by: Armin Wolf W_Armin@gmx.de [ rjw: Rename local variable to avoid compiler confusion ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/psargs.c | 39 ++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)

diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 7debfd5ce0d86..28582adfc0aca 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -25,6 +25,8 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state); static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state *parser_state);

+static void acpi_ps_free_field_list(union acpi_parse_object *start); + /******************************************************************************* * * FUNCTION: acpi_ps_get_next_package_length @@ -683,6 +685,39 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state return_PTR(field); }

+/******************************************************************************* + * + * FUNCTION: acpi_ps_free_field_list + * + * PARAMETERS: start - First Op in field list + * + * RETURN: None. + * + * DESCRIPTION: Free all Op objects inside a field list. + * + ******************************************************************************/ + +static void acpi_ps_free_field_list(union acpi_parse_object *start) +{ + union acpi_parse_object *cur = start; + union acpi_parse_object *next; + union acpi_parse_object *arg; + + while (cur) { + next = cur->common.next; + + /* AML_INT_CONNECTION_OP can have a single argument */ + + arg = acpi_ps_get_arg(cur, 0); + if (arg) { + acpi_ps_free_op(arg); + } + + acpi_ps_free_op(cur); + cur = next; + } +} + /******************************************************************************* * * FUNCTION: acpi_ps_get_next_arg @@ -751,6 +786,10 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, while (parser_state->aml < parser_state->pkg_end) { field = acpi_ps_get_next_field(parser_state); if (!field) { + if (arg) { + acpi_ps_free_field_list(arg); + } + return_ACPI_STATUS(AE_NO_MEMORY); }

From: Felix Fietkau nbd@nbd.name

[ Upstream commit 256cbd26fbafb30ba3314339106e5c594e9bd5f9 ]

Avoids firmware race condition.

Link: https://patch.msgid.link/20240827093011.18621-7-nbd@nbd.name Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c index 272e55ef8e2d2..5fba103bfd65d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c @@ -688,13 +688,17 @@ int mt7915_mcu_add_tx_ba(struct mt7915_dev *dev, { struct mt7915_sta *msta = (struct mt7915_sta *)params->sta->drv_priv; struct mt7915_vif *mvif = msta->vif; + int ret;

+ mt76_worker_disable(&dev->mt76.tx_worker); if (enable && !params->amsdu) msta->wcid.amsdu = false; + ret = mt76_connac_mcu_sta_ba(&dev->mt76, &mvif->mt76, params, + MCU_EXT_CMD(STA_REC_UPDATE), + enable, true); + mt76_worker_enable(&dev->mt76.tx_worker);

- return mt76_connac_mcu_sta_ba(&dev->mt76, &mvif->mt76, params, - MCU_EXT_CMD(STA_REC_UPDATE), - enable, true); + return ret; }

int mt7915_mcu_add_rx_ba(struct mt7915_dev *dev,

From: Hilda Wu hildawu@realtek.com

[ Upstream commit bdf9557f70e7512bb2f754abf90d9e9958745316 ]

Add the support ID (0x0489, 0xe122) to usb_device_id table for Realtek RTL8852C.

The device info from /sys/kernel/debug/usb/devices as below.

T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e122 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: Hilda Wu hildawu@realtek.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c495fceda20a2..700e17ee3d5e9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -537,6 +537,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH },

/* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit eb7b0f12e13ba99e64e3a690c2166895ed63b437 ]

The Panasonic Toughbook CF-18 advertises both native and vendor backlight control interfaces. But only the vendor one actually works.

acpi_video_get_backlight_type() will pick the non working native backlight by default, add a quirk to select the working vendor backlight instead.

Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://patch.msgid.link/20240907124419.21195-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/video_detect.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 16ab2d9ef67f3..e96afb1622f95 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -260,6 +260,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PCG-FRV35"), }, }, + { + .callback = video_detect_force_vendor, + /* Panasonic Toughbook CF-18 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Matsushita Electric Industrial"), + DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"), + }, + },

/* * Toshiba models with Transflective display, these need to use

From: Konstantin Ovsepian ovs@ovs.to

[ Upstream commit 9bce8005ec0dcb23a58300e8522fe4a31da606fa ]

Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function:

UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ...

Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits.

Reported-by: Breno Leitao leitao@debian.org Signed-off-by: Konstantin Ovsepian ovs@ovs.to Acked-by: Tejun Heo tj@kernel.org Link: https://lore.kernel.org/r/20240822154137.2627818-1-ovs@ovs.to Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-iocost.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c index 0dca77591d66c..c3cb9c20b306c 100644 --- a/block/blk-iocost.c +++ b/block/blk-iocost.c @@ -2076,7 +2076,7 @@ static void ioc_forgive_debts(struct ioc *ioc, u64 usage_us_sum, int nr_debtors, struct ioc_now *now) { struct ioc_gq *iocg; - u64 dur, usage_pct, nr_cycles; + u64 dur, usage_pct, nr_cycles, nr_cycles_shift;

/* if no debtor, reset the cycle */ if (!nr_debtors) { @@ -2138,10 +2138,12 @@ static void ioc_forgive_debts(struct ioc *ioc, u64 usage_us_sum, int nr_debtors, old_debt = iocg->abs_vdebt; old_delay = iocg->delay;

+ nr_cycles_shift = min_t(u64, nr_cycles, BITS_PER_LONG - 1); if (iocg->abs_vdebt) - iocg->abs_vdebt = iocg->abs_vdebt >> nr_cycles ?: 1; + iocg->abs_vdebt = iocg->abs_vdebt >> nr_cycles_shift ?: 1; + if (iocg->delay) - iocg->delay = iocg->delay >> nr_cycles ?: 1; + iocg->delay = iocg->delay >> nr_cycles_shift ?: 1;

iocg_kick_waitq(iocg, true, now);

From: Karthikeyan Periyasamy quic_periyasa@quicinc.com

[ Upstream commit e106b7ad13c1d246adaa57df73edb8f8b8acb240 ]

Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy quic_periyasa@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://patch.msgid.link/20240704070811.4186543-2-quic_periyasa@quicinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath12k/dp_rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c index d9bc07844fb71..70ad035acac75 100644 --- a/drivers/net/wireless/ath/ath12k/dp_rx.c +++ b/drivers/net/wireless/ath/ath12k/dp_rx.c @@ -2670,7 +2670,7 @@ int ath12k_dp_rx_process(struct ath12k_base *ab, int ring_id, if (push_reason != HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION) { dev_kfree_skb_any(msdu); - ab->soc_stats.hal_reo_error[dp->reo_dst_ring[ring_id].ring_id]++; + ab->soc_stats.hal_reo_error[ring_id]++; continue; }

From: Zong-Zhe Yang kevin_yang@realtek.com

[ Upstream commit 7e989b0c1e33210c07340bf5228aa83ea52515b5 ]

We have invoked device coredump when fw crash. Should select WANT_DEV_COREDUMP by ourselves.

Signed-off-by: Zong-Zhe Yang kevin_yang@realtek.com Signed-off-by: Ping-Ke Shih pkshih@realtek.com Link: https://patch.msgid.link/20240718070616.42217-1-pkshih@realtek.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtw88/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig index cffad1c012499..2af2bc613458d 100644 --- a/drivers/net/wireless/realtek/rtw88/Kconfig +++ b/drivers/net/wireless/realtek/rtw88/Kconfig @@ -12,6 +12,7 @@ if RTW88

config RTW88_CORE tristate + select WANT_DEV_COREDUMP

config RTW88_PCI tristate

From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com

[ Upstream commit dc171114926ec390ab90f46534545420ec03e458 ]

It is not particularly useful to release locks (the EC mutex and the ACPI global lock, if present) and re-acquire them immediately thereafter during EC address space accesses in acpi_ec_space_handler().

First, releasing them for a while before grabbing them again does not really help anyone because there may not be enough time for another thread to acquire them.

Second, if another thread successfully acquires them and carries out a new EC write or read in the middle if an operation region access in progress, it may confuse the EC firmware, especially after the burst mode has been enabled.

Finally, manipulating the locks after writing or reading every single byte of data is overhead that it is better to avoid.

Accordingly, modify the code to carry out EC address space accesses entirely without releasing the locks.

Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Hans de Goede hdegoede@redhat.com Link: https://patch.msgid.link/12473338.O9o76ZdvQC@rjwysocki.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/ec.c | 55 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 35e22a2af4e4b..115994dfefec1 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -783,6 +783,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, unsigned long tmp; int ret = 0;

+ if (t->rdata) + memset(t->rdata, 0, t->rlen); + /* start transaction */ spin_lock_irqsave(&ec->lock, tmp); /* Enable GPE for command processing (IBF=0/OBF=1) */ @@ -819,8 +822,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)

if (!ec || (!t) || (t->wlen && !t->wdata) || (t->rlen && !t->rdata)) return -EINVAL; - if (t->rdata) - memset(t->rdata, 0, t->rlen);

mutex_lock(&ec->mutex); if (ec->global_lock) { @@ -847,7 +848,7 @@ static int acpi_ec_burst_enable(struct acpi_ec *ec) .wdata = NULL, .rdata = &d, .wlen = 0, .rlen = 1};

- return acpi_ec_transaction(ec, &t); + return acpi_ec_transaction_unlocked(ec, &t); }

static int acpi_ec_burst_disable(struct acpi_ec *ec) @@ -857,7 +858,7 @@ static int acpi_ec_burst_disable(struct acpi_ec *ec) .wlen = 0, .rlen = 0};

return (acpi_ec_read_status(ec) & ACPI_EC_FLAG_BURST) ? - acpi_ec_transaction(ec, &t) : 0; + acpi_ec_transaction_unlocked(ec, &t) : 0; }

static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data) @@ -873,6 +874,19 @@ static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data) return result; }

+static int acpi_ec_read_unlocked(struct acpi_ec *ec, u8 address, u8 *data) +{ + int result; + u8 d; + struct transaction t = {.command = ACPI_EC_COMMAND_READ, + .wdata = &address, .rdata = &d, + .wlen = 1, .rlen = 1}; + + result = acpi_ec_transaction_unlocked(ec, &t); + *data = d; + return result; +} + static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data) { u8 wdata[2] = { address, data }; @@ -883,6 +897,16 @@ static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data) return acpi_ec_transaction(ec, &t); }

+static int acpi_ec_write_unlocked(struct acpi_ec *ec, u8 address, u8 data) +{ + u8 wdata[2] = { address, data }; + struct transaction t = {.command = ACPI_EC_COMMAND_WRITE, + .wdata = wdata, .rdata = NULL, + .wlen = 2, .rlen = 0}; + + return acpi_ec_transaction_unlocked(ec, &t); +} + int ec_read(u8 addr, u8 *val) { int err; @@ -1323,6 +1347,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, struct acpi_ec *ec = handler_context; int result = 0, i, bytes = bits / 8; u8 *value = (u8 *)value64; + u32 glk;

if ((address > 0xFF) || !value || !handler_context) return AE_BAD_PARAMETER; @@ -1330,13 +1355,25 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (function != ACPI_READ && function != ACPI_WRITE) return AE_BAD_PARAMETER;

+ mutex_lock(&ec->mutex); + + if (ec->global_lock) { + acpi_status status; + + status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk); + if (ACPI_FAILURE(status)) { + result = -ENODEV; + goto unlock; + } + } + if (ec->busy_polling || bits > 8) acpi_ec_burst_enable(ec);

for (i = 0; i < bytes; ++i, ++address, ++value) { result = (function == ACPI_READ) ? - acpi_ec_read(ec, address, value) : - acpi_ec_write(ec, address, *value); + acpi_ec_read_unlocked(ec, address, value) : + acpi_ec_write_unlocked(ec, address, *value); if (result < 0) break; } @@ -1344,6 +1381,12 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (ec->busy_polling || bits > 8) acpi_ec_burst_disable(ec);

+ if (ec->global_lock) + acpi_release_global_lock(glk); + +unlock: + mutex_unlock(&ec->mutex); + switch (result) { case -EINVAL: return AE_BAD_PARAMETER;

From: Simon Horman horms@kernel.org

[ Upstream commit 6555a2a9212be6983d2319d65276484f7c5f431a ]

Smatch reports that copying media_name and if_name to name_parts may overwrite the destination.

.../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16)

This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs.

Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge")

Compile tested only.

Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20240801-tipic-overrun-v2-1-c5b869d1f074@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/tipc/bearer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c index 878415c435276..fec638e494c9d 100644 --- a/net/tipc/bearer.c +++ b/net/tipc/bearer.c @@ -163,8 +163,12 @@ static int bearer_name_validate(const char *name,

/* return bearer name components, if necessary */ if (name_parts) { - strcpy(name_parts->media_name, media_name); - strcpy(name_parts->if_name, if_name); + if (strscpy(name_parts->media_name, media_name, + TIPC_MAX_MEDIA_NAME) < 0) + return 0; + if (strscpy(name_parts->if_name, if_name, + TIPC_MAX_IF_NAME) < 0) + return 0; } return 1; }

From: Simon Horman horms@kernel.org

[ Upstream commit ffff7ee843c351ce71d6e0d52f0f20bea35e18c9 ]

This corrects an out-by-one error in the maximum length of the package version string. The size argument of snprintf includes space for the trailing '\0' byte, so there is no need to allow extra space for it by reducing the value of the size argument by 1.

Found by inspection. Compile tested only.

Signed-off-by: Simon Horman horms@kernel.org Reviewed-by: Michael Chan michael.chan@broadcom.com Link: https://patch.msgid.link/20240813-bnxt-str-v2-1-872050a157e7@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 3c36dd8051485..2e7ddbca9d53b 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -3021,7 +3021,7 @@ static void bnxt_get_pkgver(struct net_device *dev)

if (!bnxt_get_pkginfo(dev, buf, sizeof(buf))) { len = strlen(bp->fw_ver_str); - snprintf(bp->fw_ver_str + len, FW_VER_STR_LEN - len - 1, + snprintf(bp->fw_ver_str + len, FW_VER_STR_LEN - len, "/pkg %s", buf); } }

From: Ping-Ke Shih pkshih@realtek.com

[ Upstream commit 45742881f9eee2a4daeb6008e648a460dd3742cd ]

Coverity reported that u8 rx_mask << 24 will become signed 32 bits, which casting to unsigned 64 bits will do sign extension. For example, putting 0x80000000 (signed 32 bits) to a u64 variable will become 0xFFFFFFFF_80000000.

The real case we meet is: rx_mask[0...3] = ff ff 00 00 ra_mask = 0xffffffff_ff0ff000

After this fix: rx_mask[0...3] = ff ff 00 00 ra_mask = 0x00000000_ff0ff000

Fortunately driver does bitwise-AND with incorrect ra_mask and supported rates (1ss and 2ss rate only) afterward, so the final rate mask of original code is still correct.

Addresses-Coverity-ID: 1504762 ("Unintended sign extension")

Signed-off-by: Ping-Ke Shih pkshih@realtek.com Link: https://patch.msgid.link/20240809072012.84152-5-pkshih@realtek.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtw89/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c index 7139146cb3fad..fac83b718a30c 100644 --- a/drivers/net/wireless/realtek/rtw89/phy.c +++ b/drivers/net/wireless/realtek/rtw89/phy.c @@ -284,8 +284,8 @@ static void rtw89_phy_ra_sta_update(struct rtw89_dev *rtwdev, csi_mode = RTW89_RA_RPT_MODE_HT; ra_mask |= ((u64)sta->deflink.ht_cap.mcs.rx_mask[3] << 48) | ((u64)sta->deflink.ht_cap.mcs.rx_mask[2] << 36) | - (sta->deflink.ht_cap.mcs.rx_mask[1] << 24) | - (sta->deflink.ht_cap.mcs.rx_mask[0] << 12); + ((u64)sta->deflink.ht_cap.mcs.rx_mask[1] << 24) | + ((u64)sta->deflink.ht_cap.mcs.rx_mask[0] << 12); high_rate_masks = rtw89_ra_mask_ht_rates; if (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_RX_STBC) stbc_en = 1;

From: Ido Schimmel idosch@nvidia.com

[ Upstream commit 8fed54758cd248cd311a2b5c1e180abef1866237 ]

The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB lookup according to user provided parameters and communicate the result back to user space.

However, unlike other users of the FIB lookup API, the upper DSCP bits and the ECN bits of the DS field are not masked, which can result in the wrong result being returned.

Solve this by masking the upper DSCP bits and the ECN bits using IPTOS_RT_MASK.

The structure that communicates the request and the response is not exported to user space, so it is unlikely that this netlink family is actually in use [1].

[1] https://lore.kernel.org/netdev/ZpqpB8vJU%2FQ6LSqa@debian/

Signed-off-by: Ido Schimmel idosch@nvidia.com Reviewed-by: Guillaume Nault gnault@redhat.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/fib_frontend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 390f4be7f7bec..90ce87ffed461 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -1343,7 +1343,7 @@ static void nl_fib_lookup(struct net *net, struct fib_result_nl *frn) struct flowi4 fl4 = { .flowi4_mark = frn->fl_mark, .daddr = frn->fl_addr, - .flowi4_tos = frn->fl_tos, + .flowi4_tos = frn->fl_tos & IPTOS_RT_MASK, .flowi4_scope = frn->fl_scope, }; struct fib_table *tb;

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit 3c44d31cb34ce4eb8311a2e73634d57702948230 ]

Algorithm registration is usually carried out during module init, where as little work as possible should be carried out. The SIMD code violated this rule by allocating a tfm, this then triggers a full test of the algorithm which may dead-lock in certain cases.

SIMD is only allocating the tfm to get at the alg object, which is in fact already available as it is what we are registering. Use that directly and remove the crypto_alloc_tfm call.

Also remove some obsolete and unused SIMD API.

Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/crypto/aes-ce-glue.c | 2 +- arch/arm/crypto/aes-neonbs-glue.c | 2 +- crypto/simd.c | 76 ++++++------------------------- include/crypto/internal/simd.h | 12 +---- 4 files changed, 19 insertions(+), 73 deletions(-)

diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b668c97663ec0..f5b66f4cf45d9 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -711,7 +711,7 @@ static int __init aes_init(void) algname = aes_algs[i].base.cra_name + 2; drvname = aes_algs[i].base.cra_driver_name + 2; basename = aes_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto unregister_simds; diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index f00f042ef3570..0ca94b90bc4ec 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -539,7 +539,7 @@ static int __init aes_init(void) algname = aes_algs[i].base.cra_name + 2; drvname = aes_algs[i].base.cra_driver_name + 2; basename = aes_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto unregister_simds; diff --git a/crypto/simd.c b/crypto/simd.c index edaa479a1ec5e..d109866641a26 100644 --- a/crypto/simd.c +++ b/crypto/simd.c @@ -136,27 +136,19 @@ static int simd_skcipher_init(struct crypto_skcipher *tfm) return 0; }

-struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname, +struct simd_skcipher_alg *simd_skcipher_create_compat(struct skcipher_alg *ialg, + const char *algname, const char *drvname, const char *basename) { struct simd_skcipher_alg *salg; - struct crypto_skcipher *tfm; - struct skcipher_alg *ialg; struct skcipher_alg *alg; int err;

- tfm = crypto_alloc_skcipher(basename, CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL | CRYPTO_ALG_ASYNC); - if (IS_ERR(tfm)) - return ERR_CAST(tfm); - - ialg = crypto_skcipher_alg(tfm); - salg = kzalloc(sizeof(*salg), GFP_KERNEL); if (!salg) { salg = ERR_PTR(-ENOMEM); - goto out_put_tfm; + goto out; }

salg->ialg_name = basename; @@ -195,30 +187,16 @@ struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname, if (err) goto out_free_salg;

-out_put_tfm: - crypto_free_skcipher(tfm); +out: return salg;

out_free_salg: kfree(salg); salg = ERR_PTR(err); - goto out_put_tfm; + goto out; } EXPORT_SYMBOL_GPL(simd_skcipher_create_compat);

-struct simd_skcipher_alg *simd_skcipher_create(const char *algname, - const char *basename) -{ - char drvname[CRYPTO_MAX_ALG_NAME]; - - if (snprintf(drvname, CRYPTO_MAX_ALG_NAME, "simd-%s", basename) >= - CRYPTO_MAX_ALG_NAME) - return ERR_PTR(-ENAMETOOLONG); - - return simd_skcipher_create_compat(algname, drvname, basename); -} -EXPORT_SYMBOL_GPL(simd_skcipher_create); - void simd_skcipher_free(struct simd_skcipher_alg *salg) { crypto_unregister_skcipher(&salg->alg); @@ -246,7 +224,7 @@ int simd_register_skciphers_compat(struct skcipher_alg *algs, int count, algname = algs[i].base.cra_name + 2; drvname = algs[i].base.cra_driver_name + 2; basename = algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto err_unregister; @@ -383,27 +361,19 @@ static int simd_aead_init(struct crypto_aead *tfm) return 0; }

-struct simd_aead_alg *simd_aead_create_compat(const char *algname, - const char *drvname, - const char *basename) +static struct simd_aead_alg *simd_aead_create_compat(struct aead_alg *ialg, + const char *algname, + const char *drvname, + const char *basename) { struct simd_aead_alg *salg; - struct crypto_aead *tfm; - struct aead_alg *ialg; struct aead_alg *alg; int err;

- tfm = crypto_alloc_aead(basename, CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL | CRYPTO_ALG_ASYNC); - if (IS_ERR(tfm)) - return ERR_CAST(tfm); - - ialg = crypto_aead_alg(tfm); - salg = kzalloc(sizeof(*salg), GFP_KERNEL); if (!salg) { salg = ERR_PTR(-ENOMEM); - goto out_put_tfm; + goto out; }

salg->ialg_name = basename; @@ -442,36 +412,20 @@ struct simd_aead_alg *simd_aead_create_compat(const char *algname, if (err) goto out_free_salg;

-out_put_tfm: - crypto_free_aead(tfm); +out: return salg;

out_free_salg: kfree(salg); salg = ERR_PTR(err); - goto out_put_tfm; -} -EXPORT_SYMBOL_GPL(simd_aead_create_compat); - -struct simd_aead_alg *simd_aead_create(const char *algname, - const char *basename) -{ - char drvname[CRYPTO_MAX_ALG_NAME]; - - if (snprintf(drvname, CRYPTO_MAX_ALG_NAME, "simd-%s", basename) >= - CRYPTO_MAX_ALG_NAME) - return ERR_PTR(-ENAMETOOLONG); - - return simd_aead_create_compat(algname, drvname, basename); + goto out; } -EXPORT_SYMBOL_GPL(simd_aead_create);

-void simd_aead_free(struct simd_aead_alg *salg) +static void simd_aead_free(struct simd_aead_alg *salg) { crypto_unregister_aead(&salg->alg); kfree(salg); } -EXPORT_SYMBOL_GPL(simd_aead_free);

int simd_register_aeads_compat(struct aead_alg *algs, int count, struct simd_aead_alg **simd_algs) @@ -493,7 +447,7 @@ int simd_register_aeads_compat(struct aead_alg *algs, int count, algname = algs[i].base.cra_name + 2; drvname = algs[i].base.cra_driver_name + 2; basename = algs[i].base.cra_driver_name; - simd = simd_aead_create_compat(algname, drvname, basename); + simd = simd_aead_create_compat(algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto err_unregister; diff --git a/include/crypto/internal/simd.h b/include/crypto/internal/simd.h index d2316242a9884..be97b97a75dd2 100644 --- a/include/crypto/internal/simd.h +++ b/include/crypto/internal/simd.h @@ -14,11 +14,10 @@ struct simd_skcipher_alg; struct skcipher_alg;

-struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname, +struct simd_skcipher_alg *simd_skcipher_create_compat(struct skcipher_alg *ialg, + const char *algname, const char *drvname, const char *basename); -struct simd_skcipher_alg *simd_skcipher_create(const char *algname, - const char *basename); void simd_skcipher_free(struct simd_skcipher_alg *alg);

int simd_register_skciphers_compat(struct skcipher_alg *algs, int count, @@ -32,13 +31,6 @@ void simd_unregister_skciphers(struct skcipher_alg *algs, int count, struct simd_aead_alg; struct aead_alg;

-struct simd_aead_alg *simd_aead_create_compat(const char *algname, - const char *drvname, - const char *basename); -struct simd_aead_alg *simd_aead_create(const char *algname, - const char *basename); -void simd_aead_free(struct simd_aead_alg *alg); - int simd_register_aeads_compat(struct aead_alg *algs, int count, struct simd_aead_alg **simd_algs);

From: Jason Xing kernelxing@tencent.com

[ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ]

We found that one close-wait socket was reset by the other side due to a new connection reusing the same port which is beyond our expectation, so we have to investigate the underlying reason.

The following experiment is conducted in the test environment. We limit the port range from 40000 to 40010 and delay the time to close() after receiving a fin from the active close side, which can help us easily reproduce like what happened in production.

Here are three connections captured by tcpdump: 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1 // a few seconds later, within 60 seconds 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2 127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193 // later, very quickly 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1

As we can see, the first flow is reset because: 1) client starts a new connection, I mean, the second one 2) client tries to find a suitable port which is a timewait socket (its state is timewait, substate is fin_wait2) 3) client occupies that timewait port to send a SYN 4) server finds a corresponding close-wait socket in ehash table, then replies with a challenge ack 5) client sends an RST to terminate this old close-wait socket.

I don't think the port selection algo can choose a FIN_WAIT2 socket when we turn on tcp_tw_reuse because on the server side there remain unread data. In some cases, if one side haven't call close() yet, we should not consider it as expendable and treat it at will.

Even though, sometimes, the server isn't able to call close() as soon as possible like what we expect, it can not be terminated easily, especially due to a second unrelated connection happening.

After this patch, we can see the expected failure if we start a connection when all the ports are occupied in fin_wait2 state: "Ncat: Cannot assign requested address."

Reported-by: Jade Dong jadedong@tencent.com Signed-off-by: Jason Xing kernelxing@tencent.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_ipv4.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 96d235bcf5cb2..df3ddf31f8e67 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -116,6 +116,9 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) const struct tcp_timewait_sock *tcptw = tcp_twsk(sktw); struct tcp_sock *tp = tcp_sk(sk);

+ if (tw->tw_substate == TCP_FIN_WAIT2) + reuse = 0; + if (reuse == 2) { /* Still does not detect *everything* that goes through * lo, since we require a loopback src or dst address

From: Miri Korenblit miriam.rachel.korenblit@intel.com

[ Upstream commit 557a6cd847645e667f3b362560bd7e7c09aac284 ]

iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta pointer is not NULL. It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is dereferencing the ieee80211_sta pointer. If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL pointer. Fix this by checking the sta pointer before retrieving the mvmsta from it. If sta is not NULL, then mvmsta isn't either.

Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Reviewed-by: Johannes Berg johannes.berg@intel.com Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 3adb1acc07191..ce5f2bdde1388 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1145,6 +1145,9 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb, bool is_ampdu = false; int hdrlen;

+ if (WARN_ON_ONCE(!sta)) + return -1; + mvmsta = iwl_mvm_sta_from_mac80211(sta); fc = hdr->frame_control; hdrlen = ieee80211_hdrlen(fc); @@ -1152,9 +1155,6 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb, if (IWL_MVM_NON_TRANSMITTING_AP && ieee80211_is_probe_resp(fc)) return -1;

- if (WARN_ON_ONCE(!mvmsta)) - return -1; - if (WARN_ON_ONCE(mvmsta->deflink.sta_id == IWL_MVM_INVALID_STA)) return -1;

@@ -1285,7 +1285,7 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb, int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb, struct ieee80211_sta *sta) { - struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_mvm_sta *mvmsta; struct ieee80211_tx_info info; struct sk_buff_head mpdus_skbs; struct ieee80211_vif *vif; @@ -1294,9 +1294,11 @@ int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb, struct sk_buff *orig_skb = skb; const u8 *addr3;

- if (WARN_ON_ONCE(!mvmsta)) + if (WARN_ON_ONCE(!sta)) return -1;

+ mvmsta = iwl_mvm_sta_from_mac80211(sta); + if (WARN_ON_ONCE(mvmsta->deflink.sta_id == IWL_MVM_INVALID_STA)) return -1;

From: Aleksandrs Vinarskis alex.vinarskis@gmail.com

[ Upstream commit a0a2459b79414584af6c46dd8c6f866d8f1aa421 ]

ACPICA commit 6c551e2c9487067d4b085333e7fe97e965a11625

Link: https://github.com/acpica/acpica/commit/6c551e2c Signed-off-by: Aleksandrs Vinarskis alex.vinarskis@gmail.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/exprep.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 08196fa17080e..82b1fa2d201fe 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -437,6 +437,9 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)

if (info->connection_node) { second_desc = info->connection_node->object; + if (second_desc == NULL) { + break; + } if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) { status = acpi_ds_get_buffer_arguments(second_desc);

From: James Clark james.clark@linaro.org

[ Upstream commit 5e9629d0ae977d6f6916d7e519724804e95f0b07 ]

Use perf_allow_kernel() for 'pa_enable' (physical addresses), 'pct_enable' (physical timestamps) and context IDs. This means that perf_event_paranoid is now taken into account and LSM hooks can be used, which is more consistent with other perf_event_open calls. For example PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just perfmon_capable().

This also indirectly fixes the following error message which is misleading because perf_event_paranoid is not taken into account by perfmon_capable():

$ perf record -e arm_spe/pa_enable/

Error: Access to performance monitoring and observability operations is limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid setting ...

Suggested-by: Al Grant al.grant@arm.com Signed-off-by: James Clark james.clark@linaro.org Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-a... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/arm_spe_pmu.c | 9 ++++----- include/linux/perf_event.h | 8 +------- kernel/events/core.c | 9 +++++++++ 3 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c index d2b0cbf0e0c41..2bec2e3af0bd6 100644 --- a/drivers/perf/arm_spe_pmu.c +++ b/drivers/perf/arm_spe_pmu.c @@ -41,7 +41,7 @@

/* * Cache if the event is allowed to trace Context information. - * This allows us to perform the check, i.e, perfmon_capable(), + * This allows us to perform the check, i.e, perf_allow_kernel(), * in the context of the event owner, once, during the event_init(). */ #define SPE_PMU_HW_FLAGS_CX 0x00001 @@ -50,7 +50,7 @@ static_assert((PERF_EVENT_FLAG_ARCH & SPE_PMU_HW_FLAGS_CX) == SPE_PMU_HW_FLAGS_C

static void set_spe_event_has_cx(struct perf_event *event) { - if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable()) + if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && !perf_allow_kernel(&event->attr)) event->hw.flags |= SPE_PMU_HW_FLAGS_CX; }

@@ -767,9 +767,8 @@ static int arm_spe_pmu_event_init(struct perf_event *event)

set_spe_event_has_cx(event); reg = arm_spe_event_to_pmscr(event); - if (!perfmon_capable() && - (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT))) - return -EACCES; + if (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT)) + return perf_allow_kernel(&event->attr);

return 0; } diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 95d4118ee4a91..7a5563ffe61b5 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1599,13 +1599,7 @@ static inline int perf_is_paranoid(void) return sysctl_perf_event_paranoid > -1; }

-static inline int perf_allow_kernel(struct perf_event_attr *attr) -{ - if (sysctl_perf_event_paranoid > 1 && !perfmon_capable()) - return -EACCES; - - return security_perf_event_open(attr, PERF_SECURITY_KERNEL); -} +int perf_allow_kernel(struct perf_event_attr *attr);

static inline int perf_allow_cpu(struct perf_event_attr *attr) { diff --git a/kernel/events/core.c b/kernel/events/core.c index 4d0abdace4e7c..d40809bdf4b30 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -13330,6 +13330,15 @@ const struct perf_event_attr *perf_event_attrs(struct perf_event *event) return &event->attr; }

+int perf_allow_kernel(struct perf_event_attr *attr) +{ + if (sysctl_perf_event_paranoid > 1 && !perfmon_capable()) + return -EACCES; + + return security_perf_event_open(attr, PERF_SECURITY_KERNEL); +} +EXPORT_SYMBOL_GPL(perf_allow_kernel); + /* * Inherit an event from parent task to child task. *

From: Weili Qian qianweili@huawei.com

[ Upstream commit 5d2d1ee0874c26b8010ddf7f57e2f246e848af38 ]

Before the device is enabled again, the device may still store the previously processed data. If an error occurs in the previous task, the device may fail to be enabled again. Therefore, before enabling device, reset the device to restore the initial state.

Signed-off-by: Weili Qian qianweili@huawei.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/hisilicon/hpre/hpre_main.c | 32 +++--- drivers/crypto/hisilicon/qm.c | 114 +++++++++++++++------- drivers/crypto/hisilicon/sec2/sec_main.c | 16 ++- drivers/crypto/hisilicon/zip/zip_main.c | 23 +++-- 4 files changed, 121 insertions(+), 64 deletions(-)

diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c index b97ce0ee71406..31abf771326ed 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_main.c +++ b/drivers/crypto/hisilicon/hpre/hpre_main.c @@ -357,6 +357,8 @@ static struct dfx_diff_registers hpre_diff_regs[] = { }, };

+static const struct hisi_qm_err_ini hpre_err_ini; + bool hpre_check_alg_support(struct hisi_qm *qm, u32 alg) { u32 cap_val; @@ -1161,6 +1163,7 @@ static int hpre_qm_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->qp_num = pf_q_num; qm->debug.curr_qm_qp_num = pf_q_num; qm->qm_list = &hpre_devices; + qm->err_ini = &hpre_err_ini; if (pf_q_num_flag) set_bit(QM_MODULE_PARAM, &qm->misc_ctl); } @@ -1350,8 +1353,6 @@ static int hpre_pf_probe_init(struct hpre *hpre)

hpre_open_sva_prefetch(qm);

- qm->err_ini = &hpre_err_ini; - qm->err_ini->err_info_init(qm); hisi_qm_dev_err_init(qm); ret = hpre_show_last_regs_init(qm); if (ret) @@ -1380,6 +1381,18 @@ static int hpre_probe_init(struct hpre *hpre) return 0; }

+static void hpre_probe_uninit(struct hisi_qm *qm) +{ + if (qm->fun_type == QM_HW_VF) + return; + + hpre_cnt_regs_clear(qm); + qm->debug.curr_qm_qp_num = 0; + hpre_show_last_regs_uninit(qm); + hpre_close_sva_prefetch(qm); + hisi_qm_dev_err_uninit(qm); +} + static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct hisi_qm *qm; @@ -1405,7 +1418,7 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)

ret = hisi_qm_start(qm); if (ret) - goto err_with_err_init; + goto err_with_probe_init;

ret = hpre_debugfs_init(qm); if (ret) @@ -1442,9 +1455,8 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) hpre_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL);

-err_with_err_init: - hpre_show_last_regs_uninit(qm); - hisi_qm_dev_err_uninit(qm); +err_with_probe_init: + hpre_probe_uninit(qm);

err_with_qm_init: hisi_qm_uninit(qm); @@ -1465,13 +1477,7 @@ static void hpre_remove(struct pci_dev *pdev) hpre_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL);

- if (qm->fun_type == QM_HW_PF) { - hpre_cnt_regs_clear(qm); - qm->debug.curr_qm_qp_num = 0; - hpre_show_last_regs_uninit(qm); - hisi_qm_dev_err_uninit(qm); - } - + hpre_probe_uninit(qm); hisi_qm_uninit(qm); }

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index 562df5c77c636..2a6ea3815cfb7 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -455,6 +455,7 @@ static struct qm_typical_qos_table shaper_cbs_s[] = { };

static void qm_irqs_unregister(struct hisi_qm *qm); +static int qm_reset_device(struct hisi_qm *qm);

static bool qm_avail_state(struct hisi_qm *qm, enum qm_state new) { @@ -4199,6 +4200,22 @@ static int qm_controller_reset_prepare(struct hisi_qm *qm) return 0; }

+static int qm_master_ooo_check(struct hisi_qm *qm) +{ + u32 val; + int ret; + + /* Check the ooo register of the device before resetting the device. */ + writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN, qm->io_base + ACC_MASTER_GLOBAL_CTRL); + ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN, + val, (val == ACC_MASTER_TRANS_RETURN_RW), + POLL_PERIOD, POLL_TIMEOUT); + if (ret) + pci_warn(qm->pdev, "Bus lock! Please reset system.\n"); + + return ret; +} + static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm) { u32 nfe_enb = 0; @@ -4221,11 +4238,10 @@ static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm) } }

-static int qm_soft_reset(struct hisi_qm *qm) +static int qm_soft_reset_prepare(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; int ret; - u32 val;

/* Ensure all doorbells and mailboxes received by QM */ ret = qm_check_req_recv(qm); @@ -4247,29 +4263,23 @@ static int qm_soft_reset(struct hisi_qm *qm) }

qm_dev_ecc_mbit_handle(qm); - - /* OOO register set and check */ - writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN, - qm->io_base + ACC_MASTER_GLOBAL_CTRL); - - /* If bus lock, reset chip */ - ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN, - val, - (val == ACC_MASTER_TRANS_RETURN_RW), - POLL_PERIOD, POLL_TIMEOUT); - if (ret) { - pci_emerg(pdev, "Bus lock! Please reset system.\n"); + ret = qm_master_ooo_check(qm); + if (ret) return ret; - }

if (qm->err_ini->close_sva_prefetch) qm->err_ini->close_sva_prefetch(qm);

ret = qm_set_pf_mse(qm, false); - if (ret) { + if (ret) pci_err(pdev, "Fails to disable pf MSE bit.\n"); - return ret; - } + + return ret; +} + +static int qm_reset_device(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev;

/* The reset related sub-control registers are not in PCI BAR */ if (ACPI_HANDLE(&pdev->dev)) { @@ -4288,12 +4298,23 @@ static int qm_soft_reset(struct hisi_qm *qm) pci_err(pdev, "Reset step %llu failed!\n", value); return -EIO; } - } else { - pci_err(pdev, "No reset method!\n"); - return -EINVAL; + + return 0; }

- return 0; + pci_err(pdev, "No reset method!\n"); + return -EINVAL; +} + +static int qm_soft_reset(struct hisi_qm *qm) +{ + int ret; + + ret = qm_soft_reset_prepare(qm); + if (ret) + return ret; + + return qm_reset_device(qm); }

static int qm_vf_reset_done(struct hisi_qm *qm) @@ -5261,6 +5282,35 @@ static int qm_get_pci_res(struct hisi_qm *qm) return ret; }

+static int qm_clear_device(struct hisi_qm *qm) +{ + acpi_handle handle = ACPI_HANDLE(&qm->pdev->dev); + int ret; + + if (qm->fun_type == QM_HW_VF) + return 0; + + /* Device does not support reset, return */ + if (!qm->err_ini->err_info_init) + return 0; + qm->err_ini->err_info_init(qm); + + if (!handle) + return 0; + + /* No reset method, return */ + if (!acpi_has_method(handle, qm->err_info.acpi_rst)) + return 0; + + ret = qm_master_ooo_check(qm); + if (ret) { + writel(0x0, qm->io_base + ACC_MASTER_GLOBAL_CTRL); + return ret; + } + + return qm_reset_device(qm); +} + static int hisi_qm_pci_init(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; @@ -5290,8 +5340,14 @@ static int hisi_qm_pci_init(struct hisi_qm *qm) goto err_get_pci_res; }

+ ret = qm_clear_device(qm); + if (ret) + goto err_free_vectors; + return 0;

+err_free_vectors: + pci_free_irq_vectors(pdev); err_get_pci_res: qm_put_pci_res(qm); err_disable_pcidev: @@ -5557,7 +5613,6 @@ static int qm_prepare_for_suspend(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; int ret; - u32 val;

ret = qm->ops->set_msi(qm, false); if (ret) { @@ -5565,18 +5620,9 @@ static int qm_prepare_for_suspend(struct hisi_qm *qm) return ret; }

- /* shutdown OOO register */ - writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN, - qm->io_base + ACC_MASTER_GLOBAL_CTRL); - - ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN, - val, - (val == ACC_MASTER_TRANS_RETURN_RW), - POLL_PERIOD, POLL_TIMEOUT); - if (ret) { - pci_emerg(pdev, "Bus lock! Please reset system.\n"); + ret = qm_master_ooo_check(qm); + if (ret) return ret; - }

ret = qm_set_pf_mse(qm, false); if (ret) diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index bf02a6b2eed41..cf7b6a37e7df7 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -1061,9 +1061,6 @@ static int sec_pf_probe_init(struct sec_dev *sec) struct hisi_qm *qm = &sec->qm; int ret;

- qm->err_ini = &sec_err_ini; - qm->err_ini->err_info_init(qm); - ret = sec_set_user_domain_and_cache(qm); if (ret) return ret; @@ -1118,6 +1115,7 @@ static int sec_qm_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->qp_num = pf_q_num; qm->debug.curr_qm_qp_num = pf_q_num; qm->qm_list = &sec_devices; + qm->err_ini = &sec_err_ini; if (pf_q_num_flag) set_bit(QM_MODULE_PARAM, &qm->misc_ctl); } else if (qm->fun_type == QM_HW_VF && qm->ver == QM_HW_V1) { @@ -1182,6 +1180,12 @@ static int sec_probe_init(struct sec_dev *sec)

static void sec_probe_uninit(struct hisi_qm *qm) { + if (qm->fun_type == QM_HW_VF) + return; + + sec_debug_regs_clear(qm); + sec_show_last_regs_uninit(qm); + sec_close_sva_prefetch(qm); hisi_qm_dev_err_uninit(qm); }

@@ -1274,7 +1278,6 @@ static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id) sec_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); err_probe_uninit: - sec_show_last_regs_uninit(qm); sec_probe_uninit(qm); err_qm_uninit: sec_qm_uninit(qm); @@ -1296,11 +1299,6 @@ static void sec_remove(struct pci_dev *pdev) sec_debugfs_exit(qm);

(void)hisi_qm_stop(qm, QM_NORMAL); - - if (qm->fun_type == QM_HW_PF) - sec_debug_regs_clear(qm); - sec_show_last_regs_uninit(qm); - sec_probe_uninit(qm);

sec_qm_uninit(qm); diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c index cd7ecb2180bf1..9d47b3675da7d 100644 --- a/drivers/crypto/hisilicon/zip/zip_main.c +++ b/drivers/crypto/hisilicon/zip/zip_main.c @@ -1150,8 +1150,6 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)

hisi_zip->ctrl = ctrl; ctrl->hisi_zip = hisi_zip; - qm->err_ini = &hisi_zip_err_ini; - qm->err_ini->err_info_init(qm);

ret = hisi_zip_set_user_domain_and_cache(qm); if (ret) @@ -1212,6 +1210,7 @@ static int hisi_zip_qm_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->qp_num = pf_q_num; qm->debug.curr_qm_qp_num = pf_q_num; qm->qm_list = &zip_devices; + qm->err_ini = &hisi_zip_err_ini; if (pf_q_num_flag) set_bit(QM_MODULE_PARAM, &qm->misc_ctl); } else if (qm->fun_type == QM_HW_VF && qm->ver == QM_HW_V1) { @@ -1278,6 +1277,16 @@ static int hisi_zip_probe_init(struct hisi_zip *hisi_zip) return 0; }

+static void hisi_zip_probe_uninit(struct hisi_qm *qm) +{ + if (qm->fun_type == QM_HW_VF) + return; + + hisi_zip_show_last_regs_uninit(qm); + hisi_zip_close_sva_prefetch(qm); + hisi_qm_dev_err_uninit(qm); +} + static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct hisi_zip *hisi_zip; @@ -1304,7 +1313,7 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)

ret = hisi_qm_start(qm); if (ret) - goto err_dev_err_uninit; + goto err_probe_uninit;

ret = hisi_zip_debugfs_init(qm); if (ret) @@ -1341,9 +1350,8 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id) hisi_zip_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL);

-err_dev_err_uninit: - hisi_zip_show_last_regs_uninit(qm); - hisi_qm_dev_err_uninit(qm); +err_probe_uninit: + hisi_zip_probe_uninit(qm);

err_qm_uninit: hisi_zip_qm_uninit(qm); @@ -1364,8 +1372,7 @@ static void hisi_zip_remove(struct pci_dev *pdev)

hisi_zip_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); - hisi_zip_show_last_regs_uninit(qm); - hisi_qm_dev_err_uninit(qm); + hisi_zip_probe_uninit(qm); hisi_zip_qm_uninit(qm); }

From: Felix Fietkau nbd@nbd.name

[ Upstream commit 8f7152f10cb434f954aeff85ca1be9cd4d01912b ]

Prevent racing against other functions disabling the same worker

Link: https://patch.msgid.link/20240827093011.18621-17-nbd@nbd.name Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c index 2222fb9aa103e..38d27f8721733 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c @@ -1538,12 +1538,14 @@ void mt7915_mac_reset_work(struct work_struct *work) set_bit(MT76_RESET, &phy2->mt76->state); cancel_delayed_work_sync(&phy2->mt76->mac_work); } + + mutex_lock(&dev->mt76.mutex); + mt76_worker_disable(&dev->mt76.tx_worker); mt76_for_each_q_rx(&dev->mt76, i) napi_disable(&dev->mt76.napi[i]); napi_disable(&dev->mt76.tx_napi);

- mutex_lock(&dev->mt76.mutex);

mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_DMA_STOPPED);

From: "Gustavo A. R. Silva" gustavoars@kernel.org

[ Upstream commit 498365e52bebcbc36a93279fe7e9d6aec8479cee ]

Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`.

With this, fix the following warning:

elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]

Reported-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/ Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Brian Norris briannorris@chromium.org Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/mwifiex/fw.h | 2 +- drivers/net/wireless/marvell/mwifiex/scan.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h index 62f3c9a52a1d5..a3be37526697b 100644 --- a/drivers/net/wireless/marvell/mwifiex/fw.h +++ b/drivers/net/wireless/marvell/mwifiex/fw.h @@ -1587,7 +1587,7 @@ struct host_cmd_ds_802_11_scan_rsp {

struct host_cmd_ds_802_11_scan_ext { u32 reserved; - u8 tlv_buffer[1]; + u8 tlv_buffer[]; } __packed;

struct mwifiex_ie_types_bss_mode { diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c index 72904c275461e..5be817d9854a6 100644 --- a/drivers/net/wireless/marvell/mwifiex/scan.c +++ b/drivers/net/wireless/marvell/mwifiex/scan.c @@ -2543,8 +2543,7 @@ int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv, ext_scan_resp = &resp->params.ext_scan;

tlv = (void *)ext_scan_resp->tlv_buffer; - buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN - - 1); + buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN);

while (buf_left >= sizeof(struct mwifiex_ie_types_header)) { type = le16_to_cpu(tlv->type);

From: Takashi Iwai tiwai@suse.de

[ Upstream commit 901e85677ec0bb9a69fb9eab1feafe0c4eb7d07e ]

For an invalid input value that is out of the given range, currently USB-audio driver corrects the value silently and accepts without errors. This is no wrong behavior, per se, but the recent kselftest rather wants to have an error in such a case, hence a different behavior is expected now.

This patch adds a sanity check at each control put for the standard mixer types and returns an error if an invalid value is given.

Note that this covers only the standard mixer types. The mixer quirks that have own control callbacks would need different coverage.

Link: https://patch.msgid.link/20240806124651.28203-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer.c | 35 +++++++++++++++++++++++++++-------- sound/usb/mixer.h | 1 + 2 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 8cc2d4937f340..197fd07e69edd 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1377,6 +1377,19 @@ static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,

#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)

+/* get the max value advertised via control API */ +static int get_max_exposed(struct usb_mixer_elem_info *cval) +{ + if (!cval->max_exposed) { + if (cval->res) + cval->max_exposed = + DIV_ROUND_UP(cval->max - cval->min, cval->res); + else + cval->max_exposed = cval->max - cval->min; + } + return cval->max_exposed; +} + /* get a feature/mixer unit info */ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) @@ -1389,11 +1402,8 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, else uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = cval->channels; - if (cval->val_type == USB_MIXER_BOOLEAN || - cval->val_type == USB_MIXER_INV_BOOLEAN) { - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; - } else { + if (cval->val_type != USB_MIXER_BOOLEAN && + cval->val_type != USB_MIXER_INV_BOOLEAN) { if (!cval->initialized) { get_min_max_with_quirks(cval, 0, kcontrol); if (cval->initialized && cval->dBmin >= cval->dBmax) { @@ -1405,10 +1415,10 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, &kcontrol->id); } } - uinfo->value.integer.min = 0; - uinfo->value.integer.max = - DIV_ROUND_UP(cval->max - cval->min, cval->res); } + + uinfo->value.integer.min = 0; + uinfo->value.integer.max = get_max_exposed(cval); return 0; }

@@ -1449,6 +1459,7 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *cval = kcontrol->private_data; + int max_val = get_max_exposed(cval); int c, cnt, val, oval, err; int changed = 0;

@@ -1461,6 +1472,8 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol, if (err < 0) return filter_error(cval, err); val = ucontrol->value.integer.value[cnt]; + if (val < 0 || val > max_val) + return -EINVAL; val = get_abs_value(cval, val); if (oval != val) { snd_usb_set_cur_mix_value(cval, c + 1, cnt, val); @@ -1474,6 +1487,8 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol, if (err < 0) return filter_error(cval, err); val = ucontrol->value.integer.value[0]; + if (val < 0 || val > max_val) + return -EINVAL; val = get_abs_value(cval, val); if (val != oval) { snd_usb_set_cur_mix_value(cval, 0, 0, val); @@ -2337,6 +2352,8 @@ static int mixer_ctl_procunit_put(struct snd_kcontrol *kcontrol, if (err < 0) return filter_error(cval, err); val = ucontrol->value.integer.value[0]; + if (val < 0 || val > get_max_exposed(cval)) + return -EINVAL; val = get_abs_value(cval, val); if (val != oval) { set_cur_ctl_value(cval, cval->control << 8, val); @@ -2699,6 +2716,8 @@ static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol, if (err < 0) return filter_error(cval, err); val = ucontrol->value.enumerated.item[0]; + if (val < 0 || val >= cval->max) /* here cval->max = # elements */ + return -EINVAL; val = get_abs_value(cval, val); if (val != oval) { set_cur_ctl_value(cval, cval->control << 8, val); diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index d43895c1ae5c6..167fbfcf01ace 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -88,6 +88,7 @@ struct usb_mixer_elem_info { int channels; int val_type; int min, max, res; + int max_exposed; /* control API exposes the value in 0..max_exposed */ int dBmin, dBmax; int cached; int cache_val[MAX_CHANNELS];

From: Karol Kosik k.kosik@outlook.com

[ Upstream commit 6aa8700150f7dc62f60b4cf5b1624e2e3d9ed78e ]

Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'. The problem stems from the driver not being able to find input/output terminals required to configure audio streaming. The information about those terminals is stored in AudioControl Interface. Numark device contains 2 AudioControl Interfaces and the driver checks only one of them.

According to the USB standard, a device can have multiple audio functions, each represented by Audio Interface Collection. Every audio function is considered to be closed box and will contain unique AudioControl Interface and zero or more AudioStreaming and MIDIStreaming Interfaces.

The Numark device adheres to the standard and defines two audio functions: - MIDIStreaming function - AudioStreaming function It starts with MIDI function, followed by the audio function. The driver saves the first AudioControl Interface in `snd_usb_audio` structure associated with the entire device. It then attempts to use this interface to query for terminals and clocks. However, this fails because the correct information is stored in the second AudioControl Interface, defined in the second Audio Interface Collection.

This patch introduces a structure holding association between each MIDI/Audio Interface and its corresponding AudioControl Interface, instead of relying on AudioControl Interface defined for the entire device. This structure is populated during usb probing phase and leveraged later when querying for terminals and when sending USB requests.

Alternative solutions considered include: - defining a quirk for Numark where the order of interface is manually changed, or terminals are hardcoded in the driver. This solution would have fixed only this model, though it seems that device is USB compliant, and it also seems that other devices from this company may be affected. What's more, it looks like products from other manufacturers have similar problems, i.e. Rane One DJ console - keeping a list of all AudioControl Interfaces and querying all of them to find required information. That would have solved my problem and have low probability of breaking other devices, as we would always start with the same logic of querying first AudioControl Interface. This solution would not have followed the standard though.

This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds the first AudioControl Interface, and uses it as a fallback when some interfaces are not parsed correctly and lack an associated AudioControl Interface, i.e., when configured via quirks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865 Signed-off-by: Karol Kosik k.kosik@outlook.com Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB128... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/card.c | 2 ++ sound/usb/clock.c | 62 ++++++++++++++++++++++++-------------- sound/usb/format.c | 6 ++-- sound/usb/helper.c | 34 +++++++++++++++++++++ sound/usb/helper.h | 10 ++++-- sound/usb/mixer.c | 2 +- sound/usb/mixer_quirks.c | 17 ++++++----- sound/usb/mixer_scarlett.c | 4 +-- sound/usb/power.c | 3 +- sound/usb/power.h | 1 + sound/usb/stream.c | 21 ++++++++----- sound/usb/usbaudio.h | 12 ++++++++ 12 files changed, 127 insertions(+), 47 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c index 1b2edc0fd2e99..7c98cc831b8d9 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -206,6 +206,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int return -EINVAL; }

+ snd_usb_add_ctrl_interface_link(chip, interface, ctrlif); + if (! snd_usb_parse_audio_interface(chip, interface)) { usb_set_interface(dev, interface, 0); /* reset the current interface */ return usb_driver_claim_interface(&usb_audio_driver, iface, diff --git a/sound/usb/clock.c b/sound/usb/clock.c index a676ad093d189..6f0693c428b0b 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -76,11 +76,14 @@ static bool validate_clock_multiplier(void *p, int id, int proto) }

#define DEFINE_FIND_HELPER(name, obj, validator, type2, type3) \ -static obj *name(struct snd_usb_audio *chip, int id, int proto) \ +static obj *name(struct snd_usb_audio *chip, int id, \ + const struct audioformat *fmt) \ { \ - return find_uac_clock_desc(chip->ctrl_intf, id, validator, \ - proto == UAC_VERSION_3 ? (type3) : (type2), \ - proto); \ + struct usb_host_interface *ctrl_intf = \ + snd_usb_find_ctrl_interface(chip, fmt->iface); \ + return find_uac_clock_desc(ctrl_intf, id, validator, \ + fmt->protocol == UAC_VERSION_3 ? (type3) : (type2), \ + fmt->protocol); \ }

DEFINE_FIND_HELPER(snd_usb_find_clock_source, @@ -93,16 +96,19 @@ DEFINE_FIND_HELPER(snd_usb_find_clock_multiplier, union uac23_clock_multiplier_desc, validate_clock_multiplier, UAC2_CLOCK_MULTIPLIER, UAC3_CLOCK_MULTIPLIER);

-static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id) +static int uac_clock_selector_get_val(struct snd_usb_audio *chip, + int selector_id, int iface_no) { + struct usb_host_interface *ctrl_intf; unsigned char buf; int ret;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no); ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, UAC2_CX_CLOCK_SELECTOR << 8, - snd_usb_ctrl_intf(chip) | (selector_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (selector_id << 8), &buf, sizeof(buf));

if (ret < 0) @@ -111,16 +117,18 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i return buf; }

-static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_id, - unsigned char pin) +static int uac_clock_selector_set_val(struct snd_usb_audio *chip, + int selector_id, unsigned char pin, int iface_no) { + struct usb_host_interface *ctrl_intf; int ret;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no); ret = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, UAC2_CX_CLOCK_SELECTOR << 8, - snd_usb_ctrl_intf(chip) | (selector_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (selector_id << 8), &pin, sizeof(pin)); if (ret < 0) return ret; @@ -132,7 +140,7 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i return -EINVAL; }

- ret = uac_clock_selector_get_val(chip, selector_id); + ret = uac_clock_selector_get_val(chip, selector_id, iface_no); if (ret < 0) return ret;

@@ -155,8 +163,10 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, unsigned char data; struct usb_device *dev = chip->dev; union uac23_clock_source_desc *cs_desc; + struct usb_host_interface *ctrl_intf;

- cs_desc = snd_usb_find_clock_source(chip, source_id, fmt->protocol); + ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface); + cs_desc = snd_usb_find_clock_source(chip, source_id, fmt); if (!cs_desc) return false;

@@ -191,7 +201,7 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_CLOCK_VALID << 8, - snd_usb_ctrl_intf(chip) | (source_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (source_id << 8), &data, sizeof(data)); if (err < 0) { dev_warn(&dev->dev, @@ -217,8 +227,10 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, struct usb_device *dev = chip->dev; u32 bmControls; union uac23_clock_source_desc *cs_desc; + struct usb_host_interface *ctrl_intf;

- cs_desc = snd_usb_find_clock_source(chip, source_id, fmt->protocol); + ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface); + cs_desc = snd_usb_find_clock_source(chip, source_id, fmt); if (!cs_desc) return false;

@@ -235,7 +247,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_CLOCK_VALID << 8, - snd_usb_ctrl_intf(chip) | (source_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (source_id << 8), &data, sizeof(data));

if (err < 0) { @@ -272,7 +284,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, }

/* first, see if the ID we're looking at is a clock source already */ - source = snd_usb_find_clock_source(chip, entity_id, proto); + source = snd_usb_find_clock_source(chip, entity_id, fmt); if (source) { entity_id = GET_VAL(source, proto, bClockID); if (validate && !uac_clock_source_is_valid(chip, fmt, @@ -285,7 +297,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, return entity_id; }

- selector = snd_usb_find_clock_selector(chip, entity_id, proto); + selector = snd_usb_find_clock_selector(chip, entity_id, fmt); if (selector) { pins = GET_VAL(selector, proto, bNrInPins); clock_id = GET_VAL(selector, proto, bClockID); @@ -299,7 +311,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,

/* the entity ID we are looking at is a selector. * find out what it currently selects */ - ret = uac_clock_selector_get_val(chip, clock_id); + ret = uac_clock_selector_get_val(chip, clock_id, fmt->iface); if (ret < 0) { if (!chip->autoclock) return ret; @@ -327,7 +339,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, /* Skip setting clock selector again for some devices */ if (chip->quirk_flags & QUIRK_FLAG_SKIP_CLOCK_SELECTOR) return ret; - err = uac_clock_selector_set_val(chip, entity_id, cur); + err = uac_clock_selector_set_val(chip, entity_id, cur, fmt->iface); if (err < 0) { if (pins == 1) { usb_audio_dbg(chip, @@ -355,7 +367,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, if (ret < 0) continue;

- err = uac_clock_selector_set_val(chip, entity_id, i); + err = uac_clock_selector_set_val(chip, entity_id, i, fmt->iface); if (err < 0) continue;

@@ -369,7 +381,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, }

/* FIXME: multipliers only act as pass-thru element for now */ - multiplier = snd_usb_find_clock_multiplier(chip, entity_id, proto); + multiplier = snd_usb_find_clock_multiplier(chip, entity_id, fmt); if (multiplier) return __uac_clock_find_source(chip, fmt, GET_VAL(multiplier, proto, bCSourceID), @@ -469,11 +481,13 @@ static int get_sample_rate_v2v3(struct snd_usb_audio *chip, int iface, struct usb_device *dev = chip->dev; __le32 data; int err; + struct usb_host_interface *ctrl_intf;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface); err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), &data, sizeof(data)); if (err < 0) { dev_warn(&dev->dev, "%d:%d: cannot get freq (v2/v3): err %d\n", @@ -502,8 +516,10 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip, __le32 data; int err; union uac23_clock_source_desc *cs_desc; + struct usb_host_interface *ctrl_intf;

- cs_desc = snd_usb_find_clock_source(chip, clock, fmt->protocol); + ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface); + cs_desc = snd_usb_find_clock_source(chip, clock, fmt);

if (!cs_desc) return 0; @@ -522,7 +538,7 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip, err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), &data, sizeof(data)); if (err < 0) return err; diff --git a/sound/usb/format.c b/sound/usb/format.c index 3b45d0ee76938..61c4aca8be09e 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -548,7 +548,9 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, unsigned char tmp[2], *data; int nr_triplets, data_size, ret = 0, ret_l6; int clock = snd_usb_clock_find_source(chip, fp, false); + struct usb_host_interface *ctrl_intf;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, fp->iface); if (clock < 0) { dev_err(&dev->dev, "%s(): unable to find clock source (clock %d)\n", @@ -560,7 +562,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), tmp, sizeof(tmp));

if (ret < 0) { @@ -595,7 +597,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), data, data_size);

if (ret < 0) { diff --git a/sound/usb/helper.c b/sound/usb/helper.c index bf80e55d013a8..72b671fb2c84c 100644 --- a/sound/usb/helper.c +++ b/sound/usb/helper.c @@ -130,3 +130,37 @@ snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting return NULL; return usb_altnum_to_altsetting(iface, altsetting); } + +int snd_usb_add_ctrl_interface_link(struct snd_usb_audio *chip, int ifnum, + int ctrlif) +{ + struct usb_device *dev = chip->dev; + struct usb_host_interface *host_iface; + + if (chip->num_intf_to_ctrl >= MAX_CARD_INTERFACES) { + dev_info(&dev->dev, "Too many interfaces assigned to the single USB-audio card\n"); + return -EINVAL; + } + + /* find audiocontrol interface */ + host_iface = &usb_ifnum_to_if(dev, ctrlif)->altsetting[0]; + + chip->intf_to_ctrl[chip->num_intf_to_ctrl].interface = ifnum; + chip->intf_to_ctrl[chip->num_intf_to_ctrl].ctrl_intf = host_iface; + chip->num_intf_to_ctrl++; + + return 0; +} + +struct usb_host_interface *snd_usb_find_ctrl_interface(struct snd_usb_audio *chip, + int ifnum) +{ + int i; + + for (i = 0; i < chip->num_intf_to_ctrl; ++i) + if (chip->intf_to_ctrl[i].interface == ifnum) + return chip->intf_to_ctrl[i].ctrl_intf; + + /* Fallback to first audiocontrol interface */ + return chip->ctrl_intf; +} diff --git a/sound/usb/helper.h b/sound/usb/helper.h index e2b51ec96ec62..0372e050b3dc4 100644 --- a/sound/usb/helper.h +++ b/sound/usb/helper.h @@ -17,6 +17,12 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip, struct usb_host_interface * snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting);

+int snd_usb_add_ctrl_interface_link(struct snd_usb_audio *chip, int ifnum, + int ctrlif); + +struct usb_host_interface *snd_usb_find_ctrl_interface(struct snd_usb_audio *chip, + int ifnum); + /* * retrieve usb_interface descriptor from the host interface * (conditional for compatibility with the older API) @@ -28,9 +34,9 @@ snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting

#define snd_usb_get_speed(dev) ((dev)->speed)

-static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip) +static inline int snd_usb_ctrl_intf(struct usb_host_interface *ctrl_intf) { - return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber; + return get_iface_desc(ctrl_intf)->bInterfaceNumber; }

/* in validate.c */ diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 197fd07e69edd..017b50322d88f 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -728,7 +728,7 @@ static int get_cluster_channels_v3(struct mixer_build *state, unsigned int clust UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, cluster_id, - snd_usb_ctrl_intf(state->chip), + snd_usb_ctrl_intf(state->mixer->hostif), &c_header, sizeof(c_header)); if (err < 0) goto error; diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index c8d48566e1759..2323504339328 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -1043,7 +1043,7 @@ static int snd_ftu_eff_switch_init(struct usb_mixer_interface *mixer, err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, pval & 0xff00, - snd_usb_ctrl_intf(mixer->chip) | ((pval & 0xff) << 8), + snd_usb_ctrl_intf(mixer->hostif) | ((pval & 0xff) << 8), value, 2); if (err < 0) return err; @@ -1077,7 +1077,7 @@ static int snd_ftu_eff_switch_update(struct usb_mixer_elem_list *list) UAC_SET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, pval & 0xff00, - snd_usb_ctrl_intf(chip) | ((pval & 0xff) << 8), + snd_usb_ctrl_intf(list->mixer->hostif) | ((pval & 0xff) << 8), value, 2); snd_usb_unlock_shutdown(chip); return err; @@ -2115,24 +2115,25 @@ static int dell_dock_mixer_create(struct usb_mixer_interface *mixer) return 0; }

-static void dell_dock_init_vol(struct snd_usb_audio *chip, int ch, int id) +static void dell_dock_init_vol(struct usb_mixer_interface *mixer, int ch, int id) { + struct snd_usb_audio *chip = mixer->chip; u16 buf = 0;

snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, (UAC_FU_VOLUME << 8) | ch, - snd_usb_ctrl_intf(chip) | (id << 8), + snd_usb_ctrl_intf(mixer->hostif) | (id << 8), &buf, 2); }

static int dell_dock_mixer_init(struct usb_mixer_interface *mixer) { /* fix to 0dB playback volumes */ - dell_dock_init_vol(mixer->chip, 1, 16); - dell_dock_init_vol(mixer->chip, 2, 16); - dell_dock_init_vol(mixer->chip, 1, 19); - dell_dock_init_vol(mixer->chip, 2, 19); + dell_dock_init_vol(mixer, 1, 16); + dell_dock_init_vol(mixer, 2, 16); + dell_dock_init_vol(mixer, 1, 19); + dell_dock_init_vol(mixer, 2, 19); return 0; }

diff --git a/sound/usb/mixer_scarlett.c b/sound/usb/mixer_scarlett.c index 0d6e4f15bf77c..ff548041679bb 100644 --- a/sound/usb/mixer_scarlett.c +++ b/sound/usb/mixer_scarlett.c @@ -460,7 +460,7 @@ static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl, struct snd_usb_audio *chip = elem->head.mixer->chip; unsigned char buf[2 * MAX_CHANNELS] = {0, }; int wValue = (elem->control << 8) | elem->idx_off; - int idx = snd_usb_ctrl_intf(chip) | (elem->head.id << 8); + int idx = snd_usb_ctrl_intf(elem->head.mixer->hostif) | (elem->head.id << 8); int err;

err = snd_usb_ctl_msg(chip->dev, @@ -1002,7 +1002,7 @@ int snd_scarlett_controls_create(struct usb_mixer_interface *mixer) err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | - USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->chip) | + USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->hostif) | (0x29 << 8), sample_rate_buffer, 4); if (err < 0) return err; diff --git a/sound/usb/power.c b/sound/usb/power.c index 606a2cb23eab6..66bd4daa68fd5 100644 --- a/sound/usb/power.c +++ b/sound/usb/power.c @@ -40,6 +40,7 @@ snd_usb_find_power_domain(struct usb_host_interface *ctrl_iface, le16_to_cpu(pd_desc->waRecoveryTime1); pd->pd_d2d0_rec = le16_to_cpu(pd_desc->waRecoveryTime2); + pd->ctrl_iface = ctrl_iface; return pd; } } @@ -57,7 +58,7 @@ int snd_usb_power_domain_set(struct snd_usb_audio *chip, unsigned char current_state; int err, idx;

- idx = snd_usb_ctrl_intf(chip) | (pd->pd_id << 8); + idx = snd_usb_ctrl_intf(pd->ctrl_iface) | (pd->pd_id << 8);

err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC2_CS_CUR, diff --git a/sound/usb/power.h b/sound/usb/power.h index 396e3e51440a7..1fa92ad0ca925 100644 --- a/sound/usb/power.h +++ b/sound/usb/power.h @@ -6,6 +6,7 @@ struct snd_usb_power_domain { int pd_id; /* UAC3 Power Domain ID */ int pd_d1d0_rec; /* D1 to D0 recovery time */ int pd_d2d0_rec; /* D2 to D0 recovery time */ + struct usb_host_interface *ctrl_iface; /* Control interface */ };

enum { diff --git a/sound/usb/stream.c b/sound/usb/stream.c index e14c725acebf2..d70c140813d68 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -713,10 +713,13 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, struct usb_device *dev = chip->dev; struct uac_format_type_i_continuous_descriptor *fmt; unsigned int num_channels = 0, chconfig = 0; + struct usb_host_interface *ctrl_intf; struct audioformat *fp; int clock = 0; u64 format;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no); + /* get audio formats */ if (protocol == UAC_VERSION_1) { struct uac1_as_header_descriptor *as = @@ -740,7 +743,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip,

format = le16_to_cpu(as->wFormatTag); /* remember the format value */

- iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, + iterm = snd_usb_find_input_terminal_descriptor(ctrl_intf, as->bTerminalLink, protocol); if (iterm) { @@ -776,7 +779,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, * lookup the terminal associated to this interface * to extract the clock */ - input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, + input_term = snd_usb_find_input_terminal_descriptor(ctrl_intf, as->bTerminalLink, protocol); if (input_term) { @@ -786,7 +789,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, goto found_clock; }

- output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf, + output_term = snd_usb_find_output_terminal_descriptor(ctrl_intf, as->bTerminalLink, protocol); if (output_term) { @@ -870,6 +873,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, struct uac3_cluster_header_descriptor *cluster; struct uac3_as_header_descriptor *as = NULL; struct uac3_hc_descriptor_header hc_header; + struct usb_host_interface *ctrl_intf; struct snd_pcm_chmap_elem *chmap; struct snd_usb_power_domain *pd; unsigned char badd_profile; @@ -881,6 +885,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, int err;

badd_profile = chip->badd_profile; + ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no);

if (badd_profile >= UAC3_FUNCTION_SUBCLASS_GENERIC_IO) { unsigned int maxpacksize = @@ -966,7 +971,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, cluster_id, - snd_usb_ctrl_intf(chip), + snd_usb_ctrl_intf(ctrl_intf), &hc_header, sizeof(hc_header)); if (err < 0) return ERR_PTR(err); @@ -990,7 +995,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, cluster_id, - snd_usb_ctrl_intf(chip), + snd_usb_ctrl_intf(ctrl_intf), cluster, wLength); if (err < 0) { kfree(cluster); @@ -1011,7 +1016,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, * lookup the terminal associated to this interface * to extract the clock */ - input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, + input_term = snd_usb_find_input_terminal_descriptor(ctrl_intf, as->bTerminalLink, UAC_VERSION_3); if (input_term) { @@ -1019,7 +1024,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, goto found_clock; }

- output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf, + output_term = snd_usb_find_output_terminal_descriptor(ctrl_intf, as->bTerminalLink, UAC_VERSION_3); if (output_term) { @@ -1068,7 +1073,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, UAC_VERSION_3, iface_no);

- pd = snd_usb_find_power_domain(chip->ctrl_intf, + pd = snd_usb_find_power_domain(ctrl_intf, as->bTerminalLink);

/* ok, let's parse further... */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 43d4029edab46..b0f042c996087 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -21,6 +21,15 @@ struct media_intf_devnode;

#define MAX_CARD_INTERFACES 16

+/* + * Structure holding assosiation between Audio Control Interface + * and given Streaming or Midi Interface. + */ +struct snd_intf_to_ctrl { + u8 interface; + struct usb_host_interface *ctrl_intf; +}; + struct snd_usb_audio { int index; struct usb_device *dev; @@ -63,6 +72,9 @@ struct snd_usb_audio { struct usb_host_interface *ctrl_intf; /* the audio control interface */ struct media_device *media_dev; struct media_intf_devnode *ctl_intf_media_devnode; + + unsigned int num_intf_to_ctrl; + struct snd_intf_to_ctrl intf_to_ctrl[MAX_CARD_INTERFACES]; };

#define USB_AUDIO_IFACE_UNUSED ((void *)-1L)

From: Takashi Iwai tiwai@suse.de

[ Upstream commit d79e13f8e8abb5cd3a2a0f9fc9bc3fc750c5b06f ]

Apply the newly introduced macros for reduce the complex expressions and cast in the quirk table definitions. It results in a significant code reduction, too.

There should be no functional changes.

Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/quirks-table.h | 2210 ++++++++++---------------------------- 1 file changed, 593 insertions(+), 1617 deletions(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index a0063caa769c5..75cde5779f38d 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -115,7 +115,7 @@ /* FTDI devices */ { USB_DEVICE(0x0403, 0xb8d8), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "STARR LABS", */ /* .product_name = "Starr Labs MIDI USB device", */ .ifnum = 0, @@ -126,10 +126,8 @@ { /* Creative BT-D1 */ USB_DEVICE(0x041e, 0x0005), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .iface = 1, @@ -164,18 +162,11 @@ */ { USB_AUDIO_DEVICE(0x041e, 0x4095), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(2) }, { - .ifnum = 3, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(3) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .fmt_bits = 16, @@ -191,9 +182,7 @@ .rate_table = (unsigned int[]) { 48000 }, }, }, - { - .ifnum = -1 - }, + QUIRK_COMPOSITE_END }, }, }, @@ -205,31 +194,18 @@ */ { USB_DEVICE(0x0424, 0xb832), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Standard Microsystems Corp.", .product_name = "HP Wireless Audio", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { /* Mixer */ - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE, - }, + { QUIRK_DATA_IGNORE(0) }, /* Playback */ - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE, - }, + { QUIRK_DATA_IGNORE(1) }, /* Capture */ - { - .ifnum = 2, - .type = QUIRK_IGNORE_INTERFACE, - }, + { QUIRK_DATA_IGNORE(2) }, /* HID Device, .ifnum = 3 */ - { - .ifnum = -1, - } + QUIRK_COMPOSITE_END } } }, @@ -252,20 +228,18 @@

#define YAMAHA_DEVICE(id, name) { \ USB_DEVICE(0x0499, id), \ - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \ + QUIRK_DRIVER_INFO { \ .vendor_name = "Yamaha", \ .product_name = name, \ - .ifnum = QUIRK_ANY_INTERFACE, \ - .type = QUIRK_MIDI_YAMAHA \ + QUIRK_DATA_MIDI_YAMAHA(QUIRK_ANY_INTERFACE) \ } \ } #define YAMAHA_INTERFACE(id, intf, name) { \ USB_DEVICE_VENDOR_SPEC(0x0499, id), \ - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \ + QUIRK_DRIVER_INFO { \ .vendor_name = "Yamaha", \ .product_name = name, \ - .ifnum = intf, \ - .type = QUIRK_MIDI_YAMAHA \ + QUIRK_DATA_MIDI_YAMAHA(intf) \ } \ } YAMAHA_DEVICE(0x1000, "UX256"), @@ -353,135 +327,67 @@ YAMAHA_DEVICE(0x105d, NULL), YAMAHA_DEVICE(0x1718, "P-125"), { USB_DEVICE(0x0499, 0x1503), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Yamaha", */ /* .product_name = "MOX6/MOX8", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_YAMAHA - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + { QUIRK_DATA_MIDI_YAMAHA(3) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0499, 0x1507), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Yamaha", */ /* .product_name = "THR10", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_YAMAHA - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + { QUIRK_DATA_MIDI_YAMAHA(3) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0499, 0x1509), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Yamaha", */ /* .product_name = "Steinberg UR22", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_YAMAHA - }, - { - .ifnum = 4, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + { QUIRK_DATA_MIDI_YAMAHA(3) }, + { QUIRK_DATA_IGNORE(4) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0499, 0x150a), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Yamaha", */ /* .product_name = "THR5A", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_YAMAHA - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + { QUIRK_DATA_MIDI_YAMAHA(3) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0499, 0x150c), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Yamaha", */ /* .product_name = "THR10C", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_YAMAHA - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + { QUIRK_DATA_MIDI_YAMAHA(3) }, + QUIRK_COMPOSITE_END } } }, @@ -515,7 +421,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), USB_DEVICE_ID_MATCH_INT_CLASS, .idVendor = 0x0499, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_AUTODETECT } @@ -526,16 +432,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), */ { USB_DEVICE(0x0582, 0x0000), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "UA-100", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 4, .iface = 0, @@ -550,9 +452,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .iface = 1, @@ -567,106 +467,66 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0007, .in_cables = 0x0007 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0002), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UM-4", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x000f, .in_cables = 0x000f } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0003), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "SC-8850", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x003f, .in_cables = 0x003f } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0004), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "U-8", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0005, .in_cables = 0x0005 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -674,152 +534,92 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Has ID 0x0099 when not in "Advanced Driver" mode. * The UM-2EX has only one input, but we cannot detect this. */ USB_DEVICE(0x0582, 0x0005), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UM-2", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0003, .in_cables = 0x0003 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0007), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "SC-8820", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0013, .in_cables = 0x0013 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0008), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "PC-300", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* has ID 0x009d when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0009), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UM-1", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x000b), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "SK-500", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0013, .in_cables = 0x0013 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -827,31 +627,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* thanks to Emiliano Grilli emillo@libero.it * for helping researching this data */ USB_DEVICE(0x0582, 0x000c), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "SC-D70", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0007, .in_cables = 0x0007 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -865,35 +653,23 @@ YAMAHA_DEVICE(0x7010, "UB99"), * the 96kHz sample rate. */ USB_DEVICE(0x0582, 0x0010), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-5", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x0013 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0012), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "XV-5050", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -902,12 +678,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0015 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0014), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UM-880", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x01ff, .in_cables = 0x01ff } @@ -916,74 +690,48 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0017 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0016), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "SD-90", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x000f, .in_cables = 0x000f } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* has ID 0x001c when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x001b), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "MMP-2", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* has ID 0x001e when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x001d), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "V-SYNTH", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -992,12 +740,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0024 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0023), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UM-550", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x003f, .in_cables = 0x003f } @@ -1010,20 +756,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), * and no MIDI. */ USB_DEVICE(0x0582, 0x0025), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-20", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 2, .iface = 1, @@ -1038,9 +777,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 2, .iface = 2, @@ -1055,28 +792,22 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 3, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* has ID 0x0028 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0027), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "SD-20", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0003, .in_cables = 0x0007 } @@ -1085,12 +816,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x002a when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0029), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "SD-80", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x000f, .in_cables = 0x000f } @@ -1103,39 +832,24 @@ YAMAHA_DEVICE(0x7010, "UB99"), * but offers only 16-bit PCM and no MIDI. */ USB_DEVICE_VENDOR_SPEC(0x0582, 0x002b), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-700", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 3, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_EDIROL_UAXX(1) }, + { QUIRK_DATA_EDIROL_UAXX(2) }, + { QUIRK_DATA_EDIROL_UAXX(3) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x002e when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x002d), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "XV-2020", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1144,12 +858,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0030 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x002f), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "VariOS", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0007, .in_cables = 0x0007 } @@ -1158,12 +870,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0034 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0033), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "PCR", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0003, .in_cables = 0x0007 } @@ -1175,12 +885,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * later revisions use IDs 0x0054 and 0x00a2. */ USB_DEVICE(0x0582, 0x0037), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "Digital Piano", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1193,39 +901,24 @@ YAMAHA_DEVICE(0x7010, "UB99"), * and no MIDI. */ USB_DEVICE_VENDOR_SPEC(0x0582, 0x003b), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "BOSS", .product_name = "GS-10", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + { QUIRK_DATA_STANDARD_MIDI(3) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x0041 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0040), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "GI-20", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1234,12 +927,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0043 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0042), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "RS-70", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1248,36 +939,24 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0049 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0047), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "EDIROL", */ /* .product_name = "UR-80", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { /* in the 96 kHz modes, only interface 1 is there */ - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x004a when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0048), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "EDIROL", */ /* .product_name = "UR-80", */ - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0003, .in_cables = 0x0007 } @@ -1286,35 +965,23 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x004e when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x004c), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "PCR-A", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x004f when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x004d), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "PCR-A", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0003, .in_cables = 0x0007 } @@ -1326,76 +993,52 @@ YAMAHA_DEVICE(0x7010, "UB99"), * is standard compliant, but has only 16-bit PCM. */ USB_DEVICE(0x0582, 0x0050), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-3FX", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0052), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UM-1SX", - .ifnum = 0, - .type = QUIRK_MIDI_STANDARD_INTERFACE + QUIRK_DATA_STANDARD_MIDI(0) } }, { USB_DEVICE(0x0582, 0x0060), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "EXR Series", - .ifnum = 0, - .type = QUIRK_MIDI_STANDARD_INTERFACE + QUIRK_DATA_STANDARD_MIDI(0) } }, { /* has ID 0x0066 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0064), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "EDIROL", */ /* .product_name = "PCR-1", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x0067 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0065), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "EDIROL", */ /* .product_name = "PCR-1", */ - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0003 } @@ -1404,12 +1047,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x006e when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x006d), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "FANTOM-X", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1422,39 +1063,24 @@ YAMAHA_DEVICE(0x7010, "UB99"), * offers only 16-bit PCM at 44.1 kHz and no MIDI. */ USB_DEVICE_VENDOR_SPEC(0x0582, 0x0074), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-25", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_EDIROL_UAXX(0) }, + { QUIRK_DATA_EDIROL_UAXX(1) }, + { QUIRK_DATA_EDIROL_UAXX(2) }, + QUIRK_COMPOSITE_END } } }, { /* has ID 0x0076 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0075), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "BOSS", .product_name = "DR-880", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1463,12 +1089,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x007b when not in "Advanced Driver" mode */ USB_DEVICE_VENDOR_SPEC(0x0582, 0x007a), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", /* "RD" or "RD-700SX"? */ - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0003, .in_cables = 0x0003 } @@ -1477,12 +1101,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x0081 when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x0080), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Roland", .product_name = "G-70", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1491,12 +1113,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* has ID 0x008c when not in "Advanced Driver" mode */ USB_DEVICE(0x0582, 0x008b), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "PC-50", - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1508,56 +1128,31 @@ YAMAHA_DEVICE(0x7010, "UB99"), * is standard compliant, but has only 16-bit PCM and no MIDI. */ USB_DEVICE(0x0582, 0x00a3), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-4FX", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_EDIROL_UAXX(0) }, + { QUIRK_DATA_EDIROL_UAXX(1) }, + { QUIRK_DATA_EDIROL_UAXX(2) }, + QUIRK_COMPOSITE_END } } }, { /* Edirol M-16DX */ USB_DEVICE(0x0582, 0x00c4), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -1567,37 +1162,22 @@ YAMAHA_DEVICE(0x7010, "UB99"), * offers only 16-bit PCM at 44.1 kHz and no MIDI. */ USB_DEVICE_VENDOR_SPEC(0x0582, 0x00e6), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "EDIROL", .product_name = "UA-25EX", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_EDIROL_UAXX - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_EDIROL_UAXX(0) }, + { QUIRK_DATA_EDIROL_UAXX(1) }, + { QUIRK_DATA_EDIROL_UAXX(2) }, + QUIRK_COMPOSITE_END } } }, { /* Edirol UM-3G */ USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = 0, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) { .out_cables = 0x0007, .in_cables = 0x0007 } @@ -1606,45 +1186,29 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* BOSS ME-25 */ USB_DEVICE(0x0582, 0x0113), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* only 44.1 kHz works at the moment */ USB_DEVICE(0x0582, 0x0120), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Roland", */ /* .product_name = "OCTO-CAPTURE", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 10, .iface = 0, @@ -1660,9 +1224,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 12, .iface = 1, @@ -1678,40 +1240,26 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = 3, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 4, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = -1 - } + { QUIRK_DATA_IGNORE(3) }, + { QUIRK_DATA_IGNORE(4) }, + QUIRK_COMPOSITE_END } } }, { /* only 44.1 kHz works at the moment */ USB_DEVICE(0x0582, 0x012f), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Roland", */ /* .product_name = "QUAD-CAPTURE", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 4, .iface = 0, @@ -1727,9 +1275,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 6, .iface = 1, @@ -1745,54 +1291,32 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = 3, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 4, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = -1 - } + { QUIRK_DATA_IGNORE(3) }, + { QUIRK_DATA_IGNORE(4) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0582, 0x0159), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Roland", */ /* .product_name = "UA-22", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -1800,19 +1324,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* UA101 and co are supported by another driver */ { USB_DEVICE(0x0582, 0x0044), /* UA-1000 high speed */ - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .ifnum = QUIRK_NODEV_INTERFACE }, }, { USB_DEVICE(0x0582, 0x007d), /* UA-101 high speed */ - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .ifnum = QUIRK_NODEV_INTERFACE }, }, { USB_DEVICE(0x0582, 0x008d), /* UA-101 full speed */ - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .ifnum = QUIRK_NODEV_INTERFACE }, }, @@ -1823,7 +1347,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), USB_DEVICE_ID_MATCH_INT_CLASS, .idVendor = 0x0582, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_AUTODETECT } @@ -1838,12 +1362,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * compliant USB MIDI ports for external MIDI and controls. */ USB_DEVICE_VENDOR_SPEC(0x06f8, 0xb000), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Hercules", .product_name = "DJ Console (WE)", - .ifnum = 4, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(4) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1853,12 +1375,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Midiman/M-Audio devices */ { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1002), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "MidiSport 2x2", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x0003, .in_cables = 0x0003 } @@ -1866,12 +1386,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1011), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "MidiSport 1x1", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1879,12 +1397,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1015), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "Keystation", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -1892,12 +1408,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1021), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "MidiSport 4x4", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x000f, .in_cables = 0x000f } @@ -1910,12 +1424,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * Thanks to Olaf Giesbrecht Olaf_Giesbrecht@yahoo.de */ USB_DEVICE_VER(0x0763, 0x1031, 0x0100, 0x0109), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "MidiSport 8x8", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x01ff, .in_cables = 0x01ff } @@ -1923,12 +1435,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1033), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "MidiSport 8x8", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x01ff, .in_cables = 0x01ff } @@ -1936,12 +1446,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x1041), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "MidiSport 2x4", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) { .out_cables = 0x000f, .in_cables = 0x0003 } @@ -1949,76 +1457,41 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2001), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "Quattro", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { /* * Interfaces 0-2 are "Windows-compatible", 16-bit only, * and share endpoints with the other interfaces. * Ignore them. The other interfaces can do 24 bits, * but captured samples are big-endian (see usbaudio.c). */ - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 4, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 5, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 6, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 7, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 8, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 9, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, + { QUIRK_DATA_IGNORE(2) }, + { QUIRK_DATA_IGNORE(3) }, + { QUIRK_DATA_STANDARD_AUDIO(4) }, + { QUIRK_DATA_STANDARD_AUDIO(5) }, + { QUIRK_DATA_IGNORE(6) }, + { QUIRK_DATA_STANDARD_AUDIO(7) }, + { QUIRK_DATA_STANDARD_AUDIO(8) }, + { + QUIRK_DATA_MIDI_MIDIMAN(9) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2003), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "AudioPhile", - .ifnum = 6, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(6) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -2026,12 +1499,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2008), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "Ozone", - .ifnum = 3, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(3) { .out_cables = 0x0001, .in_cables = 0x0001 } @@ -2039,93 +1510,45 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x200d), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "M-Audio", .product_name = "OmniStudio", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 4, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 5, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 6, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 7, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 8, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 9, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, + { QUIRK_DATA_IGNORE(2) }, + { QUIRK_DATA_IGNORE(3) }, + { QUIRK_DATA_STANDARD_AUDIO(4) }, + { QUIRK_DATA_STANDARD_AUDIO(5) }, + { QUIRK_DATA_IGNORE(6) }, + { QUIRK_DATA_STANDARD_AUDIO(7) }, + { QUIRK_DATA_STANDARD_AUDIO(8) }, + { + QUIRK_DATA_MIDI_MIDIMAN(9) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x0763, 0x2019), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "M-Audio", */ /* .product_name = "Ozone Academic", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 3, - .type = QUIRK_MIDI_MIDIMAN, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(3) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -2135,21 +1558,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2030), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "M-Audio", */ /* .product_name = "Fast Track C400", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(1) }, /* Playback */ { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 6, .iface = 2, @@ -2173,9 +1589,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, /* Capture */ { - .ifnum = 3, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(3) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 3, @@ -2197,30 +1611,21 @@ YAMAHA_DEVICE(0x7010, "UB99"), .clock = 0x80, } }, - /* MIDI */ - { - .ifnum = -1 /* Interface = 4 */ - } + /* MIDI: Interface = 4*/ + QUIRK_COMPOSITE_END } } }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2031), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "M-Audio", */ /* .product_name = "Fast Track C600", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(1) }, /* Playback */ { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 2, @@ -2244,9 +1649,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, /* Capture */ { - .ifnum = 3, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(3) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 6, .iface = 3, @@ -2268,29 +1671,20 @@ YAMAHA_DEVICE(0x7010, "UB99"), .clock = 0x80, } }, - /* MIDI */ - { - .ifnum = -1 /* Interface = 4 */ - } + /* MIDI: Interface = 4 */ + QUIRK_COMPOSITE_END } } }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2080), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "M-Audio", */ /* .product_name = "Fast Track Ultra", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 1, @@ -2312,9 +1706,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 2, @@ -2336,28 +1728,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, /* interface 3 (MIDI) is standard compliant */ - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { USB_DEVICE_VENDOR_SPEC(0x0763, 0x2081), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "M-Audio", */ /* .product_name = "Fast Track Ultra 8R", */ - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 1, @@ -2379,9 +1762,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 2, @@ -2403,9 +1784,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, /* interface 3 (MIDI) is standard compliant */ - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -2413,21 +1792,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Casio devices */ { USB_DEVICE(0x07cf, 0x6801), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Casio", .product_name = "PL-40R", - .ifnum = 0, - .type = QUIRK_MIDI_YAMAHA + QUIRK_DATA_MIDI_YAMAHA(0) } }, { /* this ID is used by several devices without a product ID */ USB_DEVICE(0x07cf, 0x6802), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Casio", .product_name = "Keyboard", - .ifnum = 0, - .type = QUIRK_MIDI_YAMAHA + QUIRK_DATA_MIDI_YAMAHA(0) } },

@@ -2440,23 +1817,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), .idVendor = 0x07fd, .idProduct = 0x0001, .bDeviceSubClass = 2, - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "MOTU", .product_name = "Fastlane", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_MIDI_RAW_BYTES - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_RAW_BYTES(0) }, + { QUIRK_DATA_IGNORE(1) }, + QUIRK_COMPOSITE_END } } }, @@ -2464,12 +1831,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Emagic devices */ { USB_DEVICE(0x086a, 0x0001), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Emagic", .product_name = "Unitor8", - .ifnum = 2, - .type = QUIRK_MIDI_EMAGIC, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_EMAGIC(2) { .out_cables = 0x80ff, .in_cables = 0x80ff } @@ -2477,12 +1842,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE(0x086a, 0x0002), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Emagic", /* .product_name = "AMT8", */ - .ifnum = 2, - .type = QUIRK_MIDI_EMAGIC, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_EMAGIC(2) { .out_cables = 0x80ff, .in_cables = 0x80ff } @@ -2490,12 +1853,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE(0x086a, 0x0003), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Emagic", /* .product_name = "MT4", */ - .ifnum = 2, - .type = QUIRK_MIDI_EMAGIC, - .data = & (const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_EMAGIC(2) { .out_cables = 0x800f, .in_cables = 0x8003 } @@ -2505,38 +1866,35 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* KORG devices */ { USB_DEVICE_VENDOR_SPEC(0x0944, 0x0200), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "KORG, Inc.", /* .product_name = "PANDORA PX5D", */ - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE, + QUIRK_DATA_STANDARD_MIDI(3) } },

{ USB_DEVICE_VENDOR_SPEC(0x0944, 0x0201), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "KORG, Inc.", /* .product_name = "ToneLab ST", */ - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE, + QUIRK_DATA_STANDARD_MIDI(3) } },

{ USB_DEVICE_VENDOR_SPEC(0x0944, 0x0204), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "KORG, Inc.", /* .product_name = "ToneLab EX", */ - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE, + QUIRK_DATA_STANDARD_MIDI(3) } },

/* AKAI devices */ { USB_DEVICE(0x09e8, 0x0062), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "AKAI", .product_name = "MPD16", .ifnum = 0, @@ -2547,21 +1905,11 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* Akai MPC Element */ USB_DEVICE(0x09e8, 0x0021), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_MIDI_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_STANDARD_MIDI(1) }, + QUIRK_COMPOSITE_END } } }, @@ -2570,66 +1918,36 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* Steinberg MI2 */ USB_DEVICE_VENDOR_SPEC(0x0a4e, 0x2040), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, { - .ifnum = 3, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = &(const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* Steinberg MI4 */ USB_DEVICE_VENDOR_SPEC(0x0a4e, 0x4040), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = & (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, { - .ifnum = 3, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = &(const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -2637,34 +1955,31 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* TerraTec devices */ { USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "TerraTec", .product_name = "PHASE 26", - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE + QUIRK_DATA_STANDARD_MIDI(3) } }, { USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0013), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "TerraTec", .product_name = "PHASE 26", - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE + QUIRK_DATA_STANDARD_MIDI(3) } }, { USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0014), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "TerraTec", .product_name = "PHASE 26", - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE + QUIRK_DATA_STANDARD_MIDI(3) } }, { USB_DEVICE(0x0ccd, 0x0035), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Miditech", .product_name = "Play'n Roll", .ifnum = 0, @@ -2679,7 +1994,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Novation EMS devices */ { USB_DEVICE_VENDOR_SPEC(0x1235, 0x0001), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Novation", .product_name = "ReMOTE Audio/XStation", .ifnum = 4, @@ -2688,7 +2003,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE_VENDOR_SPEC(0x1235, 0x0002), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Novation", .product_name = "Speedio", .ifnum = 3, @@ -2697,38 +2012,29 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE(0x1235, 0x000a), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Novation", */ /* .product_name = "Nocturn", */ - .ifnum = 0, - .type = QUIRK_MIDI_RAW_BYTES + QUIRK_DATA_RAW_BYTES(0) } }, { USB_DEVICE(0x1235, 0x000e), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { /* .vendor_name = "Novation", */ /* .product_name = "Launchpad", */ - .ifnum = 0, - .type = QUIRK_MIDI_RAW_BYTES + QUIRK_DATA_RAW_BYTES(0) } }, { USB_DEVICE(0x1235, 0x0010), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Focusrite", .product_name = "Saffire 6 USB", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, - { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 0, @@ -2755,9 +2061,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 2, .iface = 0, @@ -2779,28 +2083,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = 1, - .type = QUIRK_MIDI_RAW_BYTES - }, - { - .ifnum = -1 - } + { QUIRK_DATA_RAW_BYTES(1) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE(0x1235, 0x0018), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Novation", .product_name = "Twitch", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = & (const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 0, @@ -2819,19 +2114,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = 1, - .type = QUIRK_MIDI_RAW_BYTES - }, - { - .ifnum = -1 - } + { QUIRK_DATA_RAW_BYTES(1) }, + QUIRK_COMPOSITE_END } } }, { USB_DEVICE_VENDOR_SPEC(0x1235, 0x4661), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Novation", .product_name = "ReMOTE25", .ifnum = 0, @@ -2843,25 +2133,16 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* VirusTI Desktop */ USB_DEVICE_VENDOR_SPEC(0x133e, 0x0815), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 3, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = &(const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) { .out_cables = 0x0003, .in_cables = 0x0003 } }, - { - .ifnum = 4, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = -1 - } + { QUIRK_DATA_IGNORE(4) }, + QUIRK_COMPOSITE_END } } }, @@ -2889,7 +2170,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* QinHeng devices */ { USB_DEVICE(0x1a86, 0x752d), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "QinHeng", .product_name = "CH345", .ifnum = 1, @@ -2903,7 +2184,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Miditech devices */ { USB_DEVICE(0x4752, 0x0011), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Miditech", .product_name = "Midistart-2", .ifnum = 0, @@ -2915,7 +2196,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* this ID used by both Miditech MidiStudio-2 and CME UF-x */ USB_DEVICE(0x7104, 0x2202), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .ifnum = 0, .type = QUIRK_MIDI_CME } @@ -2925,20 +2206,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* Thanks to Clemens Ladisch clemens@ladisch.de */ USB_DEVICE(0x0dba, 0x1000), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Digidesign", .product_name = "MBox", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]){ - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE{ + { QUIRK_DATA_STANDARD_MIXER(0) }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3BE, .channels = 2, .iface = 1, @@ -2959,9 +2233,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3BE, .channels = 2, .iface = 1, @@ -2982,9 +2254,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -2992,24 +2262,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* DIGIDESIGN MBOX 2 */ { USB_DEVICE(0x0dba, 0x3000), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Digidesign", .product_name = "Mbox 2", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3BE, .channels = 2, .iface = 2, @@ -3027,15 +2287,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, + { QUIRK_DATA_IGNORE(3) }, { - .ifnum = 3, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 4, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { - .formats = SNDRV_PCM_FMTBIT_S24_3BE, + QUIRK_DATA_AUDIOFORMAT(4) { + .formats = SNDRV_PCM_FMTBIT_S24_3BE, .channels = 2, .iface = 4, .altsetting = 2, @@ -3052,14 +2307,9 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, + { QUIRK_DATA_IGNORE(5) }, { - .ifnum = 5, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 6, - .type = QUIRK_MIDI_MIDIMAN, - .data = &(const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_MIDIMAN(6) { .out_ep = 0x02, .out_cables = 0x0001, .in_ep = 0x81, @@ -3067,33 +2317,21 @@ YAMAHA_DEVICE(0x7010, "UB99"), .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, /* DIGIDESIGN MBOX 3 */ { USB_DEVICE(0x0dba, 0x5000), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Digidesign", .product_name = "Mbox 3", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_IGNORE(1) }, { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 2, @@ -3113,9 +2351,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 3, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(3) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 3, @@ -3136,36 +2372,25 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 4, - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = &(const struct snd_usb_midi_endpoint_info) { + QUIRK_DATA_MIDI_FIXED_ENDPOINT(4) { .out_cables = 0x0001, .in_cables = 0x0001 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, { /* Tascam US122 MKII - playback-only support */ USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "TASCAM", .product_name = "US122 MKII", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 2, .iface = 1, @@ -3186,9 +2411,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3196,20 +2419,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Denon DN-X1600 */ { USB_AUDIO_DEVICE(0x154e, 0x500e), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Denon", .product_name = "DN-X1600", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]){ + QUIRK_DATA_COMPOSITE{ + { QUIRK_DATA_IGNORE(0) }, { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE, - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 1, @@ -3230,9 +2446,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 2, @@ -3252,13 +2466,8 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = 4, - .type = QUIRK_MIDI_STANDARD_INTERFACE, - }, - { - .ifnum = -1 - } + { QUIRK_DATA_STANDARD_MIDI(4) }, + QUIRK_COMPOSITE_END } } }, @@ -3267,17 +2476,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), { USB_DEVICE(0x045e, 0x0283), .bInterfaceClass = USB_CLASS_PER_INTERFACE, - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Microsoft", .product_name = "XboxLive Headset/Xbox Communicator", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { { /* playback */ - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 1, .iface = 0, @@ -3293,9 +2498,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { /* capture */ - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 1, .iface = 1, @@ -3309,9 +2512,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_max = 16000 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3320,18 +2521,11 @@ YAMAHA_DEVICE(0x7010, "UB99"), { USB_DEVICE(0x200c, 0x100b), .bInterfaceClass = USB_CLASS_PER_INTERFACE, - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 1, @@ -3350,9 +2544,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3365,28 +2557,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), * enabled in create_standard_audio_quirk(). */ USB_DEVICE(0x1686, 0x00dd), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - /* Playback */ - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE, - }, - { - /* Capture */ - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE, - }, - { - /* Midi */ - .ifnum = 3, - .type = QUIRK_MIDI_STANDARD_INTERFACE - }, - { - .ifnum = -1 - }, + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(1) }, /* Playback */ + { QUIRK_DATA_STANDARD_AUDIO(2) }, /* Capture */ + { QUIRK_DATA_STANDARD_MIDI(3) }, /* Midi */ + QUIRK_COMPOSITE_END } } }, @@ -3400,18 +2576,16 @@ YAMAHA_DEVICE(0x7010, "UB99"), USB_DEVICE_ID_MATCH_INT_SUBCLASS, .bInterfaceClass = USB_CLASS_AUDIO, .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING, - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_MIDI_STANDARD_INTERFACE + QUIRK_DRIVER_INFO { + QUIRK_DATA_STANDARD_MIDI(QUIRK_ANY_INTERFACE) } },

/* Rane SL-1 */ { USB_DEVICE(0x13e5, 0x0001), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_AUDIO_STANDARD_INTERFACE + QUIRK_DRIVER_INFO { + QUIRK_DATA_STANDARD_AUDIO(QUIRK_ANY_INTERFACE) } },

@@ -3427,24 +2601,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), * and only the 48 kHz sample rate works for the playback interface. */ USB_DEVICE(0x0a12, 0x1243), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, - /* Capture */ - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE, - }, + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, + { QUIRK_DATA_IGNORE(1) }, /* Capture */ /* Playback */ { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .iface = 2, @@ -3463,9 +2626,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - }, + QUIRK_COMPOSITE_END } } }, @@ -3478,19 +2639,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), * even on windows. */ USB_DEVICE(0x19b5, 0x0021), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, /* Playback */ { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .iface = 1, @@ -3509,29 +2663,20 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - }, + QUIRK_COMPOSITE_END } } }, /* MOTU Microbook II */ { USB_DEVICE_VENDOR_SPEC(0x07fd, 0x0004), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "MOTU", .product_name = "MicroBookII", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(0) }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3BE, .channels = 6, .iface = 0, @@ -3552,9 +2697,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3BE, .channels = 8, .iface = 0, @@ -3575,9 +2718,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3589,14 +2730,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * The feedback for the output is the input. */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0023), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 12, .iface = 0, @@ -3613,9 +2750,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 10, .iface = 0, @@ -3633,9 +2768,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3678,14 +2811,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * but not for DVS (Digital Vinyl Systems) like in Mixxx. */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, // outputs .iface = 0, @@ -3702,9 +2831,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, // inputs .iface = 0, @@ -3722,9 +2849,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 48000 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3735,14 +2860,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * The feedback for the output is the dummy input. */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000e), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 0, @@ -3759,9 +2880,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 2, .iface = 0, @@ -3779,9 +2898,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3792,14 +2909,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * PCM is 6 channels out & 4 channels in @ 44.1 fixed */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000d), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 6, //Master, Headphones & Booth .iface = 0, @@ -3816,9 +2929,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, //2x RCA inputs (CH1 & CH2) .iface = 0, @@ -3836,9 +2947,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3850,14 +2959,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * The Feedback for the output is the input */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001e), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 4, .iface = 0, @@ -3874,9 +2979,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 6, .iface = 0, @@ -3894,9 +2997,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3907,14 +3008,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * 10 channels playback & 12 channels capture @ 44.1/48/96kHz S24LE */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000a), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 10, .iface = 0, @@ -3935,9 +3032,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 12, .iface = 0, @@ -3959,9 +3054,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -3973,14 +3066,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * The Feedback for the output is the input */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0029), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 6, .iface = 0, @@ -3997,9 +3086,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 6, .iface = 0, @@ -4017,9 +3104,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4037,20 +3122,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), */ { USB_AUDIO_DEVICE(0x534d, 0x0021), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "MacroSilicon", .product_name = "MS210x", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(2) }, { - .ifnum = 3, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(3) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .iface = 3, @@ -4065,9 +3143,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_max = 48000, } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4085,20 +3161,13 @@ YAMAHA_DEVICE(0x7010, "UB99"), */ { USB_AUDIO_DEVICE(0x534d, 0x2109), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "MacroSilicon", .product_name = "MS2109", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_MIXER(2) }, { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_MIXER, - }, - { - .ifnum = 3, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(3) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, .iface = 3, @@ -4113,9 +3182,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_max = 48000, } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4125,14 +3192,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * 8 channels playback & 8 channels capture @ 44.1/48/96kHz S24LE */ USB_DEVICE_VENDOR_SPEC(0x08e4, 0x017f), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 0, @@ -4151,9 +3214,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 0, @@ -4173,9 +3234,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100, 48000, 96000 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4185,14 +3244,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * 10 channels playback & 12 channels capture @ 48kHz S24LE */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001b), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 10, .iface = 0, @@ -4211,9 +3266,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 12, .iface = 0, @@ -4231,9 +3284,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 48000 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4245,14 +3296,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * Capture on EP 0x86 */ USB_DEVICE_VENDOR_SPEC(0x08e4, 0x0163), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 0, @@ -4272,9 +3319,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, .iface = 0, @@ -4294,9 +3339,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 44100, 48000, 96000 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4307,14 +3350,10 @@ YAMAHA_DEVICE(0x7010, "UB99"), * and 8 channels in @ 48 fixed (endpoint 0x82). */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0013), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, // outputs .iface = 0, @@ -4331,9 +3370,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - .ifnum = 0, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(0) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, .channels = 8, // inputs .iface = 0, @@ -4351,9 +3388,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .rate_table = (unsigned int[]) { 48000 } } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4364,28 +3399,15 @@ YAMAHA_DEVICE(0x7010, "UB99"), */ USB_DEVICE(0x1395, 0x0300), .bInterfaceClass = USB_CLASS_PER_INTERFACE, - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { // Communication - { - .ifnum = 3, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + { QUIRK_DATA_STANDARD_AUDIO(3) }, // Recording - { - .ifnum = 4, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + { QUIRK_DATA_STANDARD_AUDIO(4) }, // Main - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, - { - .ifnum = -1 - } + { QUIRK_DATA_STANDARD_AUDIO(1) }, + QUIRK_COMPOSITE_END } } }, @@ -4394,21 +3416,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), * Fiero SC-01 (firmware v1.0.0 @ 48 kHz) */ USB_DEVICE(0x2b53, 0x0023), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Fiero", .product_name = "SC-01", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, /* Playback */ { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 2, .fmt_bits = 24, @@ -4428,9 +3443,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, /* Capture */ { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 2, .fmt_bits = 24, @@ -4449,9 +3462,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .clock = 0x29 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4460,21 +3471,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), * Fiero SC-01 (firmware v1.0.0 @ 96 kHz) */ USB_DEVICE(0x2b53, 0x0024), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Fiero", .product_name = "SC-01", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, /* Playback */ { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 2, .fmt_bits = 24, @@ -4494,9 +3498,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, /* Capture */ { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 2, .fmt_bits = 24, @@ -4515,9 +3517,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .clock = 0x29 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4526,21 +3526,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), * Fiero SC-01 (firmware v1.1.0) */ USB_DEVICE(0x2b53, 0x0031), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Fiero", .product_name = "SC-01", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = &(const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_AUDIO_STANDARD_INTERFACE - }, + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_STANDARD_AUDIO(0) }, /* Playback */ { - .ifnum = 1, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(1) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 2, .fmt_bits = 24, @@ -4561,9 +3554,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, /* Capture */ { - .ifnum = 2, - .type = QUIRK_AUDIO_FIXED_ENDPOINT, - .data = &(const struct audioformat) { + QUIRK_DATA_AUDIOFORMAT(2) { .formats = SNDRV_PCM_FMTBIT_S32_LE, .channels = 2, .fmt_bits = 24, @@ -4583,9 +3574,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .clock = 0x29 } }, - { - .ifnum = -1 - } + QUIRK_COMPOSITE_END } } }, @@ -4594,27 +3583,14 @@ YAMAHA_DEVICE(0x7010, "UB99"), * For the standard mode, Mythware XA001AU has ID ffad:a001 */ USB_DEVICE_VENDOR_SPEC(0xffad, 0xa001), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + QUIRK_DRIVER_INFO { .vendor_name = "Mythware", .product_name = "XA001AU", - .ifnum = QUIRK_ANY_INTERFACE, - .type = QUIRK_COMPOSITE, - .data = (const struct snd_usb_audio_quirk[]) { - { - .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE, - }, - { - .ifnum = 1, - .type = QUIRK_AUDIO_STANDARD_INTERFACE, - }, - { - .ifnum = 2, - .type = QUIRK_AUDIO_STANDARD_INTERFACE, - }, - { - .ifnum = -1 - } + QUIRK_DATA_COMPOSITE { + { QUIRK_DATA_IGNORE(0) }, + { QUIRK_DATA_STANDARD_AUDIO(1) }, + { QUIRK_DATA_STANDARD_AUDIO(2) }, + QUIRK_COMPOSITE_END } } },

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 2fbf16992e5aa14acf0441320033a01a32309ded ]

If reading version and variant from registers fails (which is unlikely but possible, because it is a read over bus), the driver will proceed and perform device configuration based on uninitialized stack variables. Handle it a bit better - bail out without doing any init and failing the update status Soundwire callback.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://patch.msgid.link/20240710-asoc-wsa88xx-version-v1-2-f1c54966ccde@lin... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wsa883x.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index 2169d93989841..1831d4487ba9d 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -998,15 +998,19 @@ static const struct reg_sequence reg_init[] = { {WSA883X_GMAMP_SUP1, 0xE2}, };

-static void wsa883x_init(struct wsa883x_priv *wsa883x) +static int wsa883x_init(struct wsa883x_priv *wsa883x) { struct regmap *regmap = wsa883x->regmap; - int variant, version; + int variant, version, ret;

- regmap_read(regmap, WSA883X_OTP_REG_0, &variant); + ret = regmap_read(regmap, WSA883X_OTP_REG_0, &variant); + if (ret) + return ret; wsa883x->variant = variant & WSA883X_ID_MASK;

- regmap_read(regmap, WSA883X_CHIP_ID0, &version); + ret = regmap_read(regmap, WSA883X_CHIP_ID0, &version); + if (ret) + return ret; wsa883x->version = version;

switch (wsa883x->variant) { @@ -1041,6 +1045,8 @@ static void wsa883x_init(struct wsa883x_priv *wsa883x) WSA883X_DRE_OFFSET_MASK, wsa883x->comp_offset); } + + return 0; }

static int wsa883x_update_status(struct sdw_slave *slave, @@ -1049,7 +1055,7 @@ static int wsa883x_update_status(struct sdw_slave *slave, struct wsa883x_priv *wsa883x = dev_get_drvdata(&slave->dev);

if (status == SDW_SLAVE_ATTACHED && slave->dev_num > 0) - wsa883x_init(wsa883x); + return wsa883x_init(wsa883x);

return 0; }

From: Aruna Ramakrishna aruna.ramakrishna@oracle.com

[ Upstream commit 24cf2bc982ffe02aeffb4a3885c71751a2c7023b ]

Assume there's a multithreaded application that runs untrusted user code. Each thread has its stack/code protected by a non-zero PKEY, and the PKRU register is set up such that only that particular non-zero PKEY is enabled. Each thread also sets up an alternate signal stack to handle signals, which is protected by PKEY zero. The PKEYs man page documents that the PKRU will be reset to init_pkru when the signal handler is invoked, which means that PKEY zero access will be enabled. But this reset happens after the kernel attempts to push fpu state to the alternate stack, which is not (yet) accessible by the kernel, which leads to a new SIGSEGV being sent to the application, terminating it.

Enabling both the non-zero PKEY (for the thread) and PKEY zero in userspace will not work for this use case. It cannot have the alt stack writeable by all - the rationale here is that the code running in that thread (using a non-zero PKEY) is untrusted and should not have access to the alternate signal stack (that uses PKEY zero), to prevent the return address of a function from being changed. The expectation is that kernel should be able to set up the alternate signal stack and deliver the signal to the application even if PKEY zero is explicitly disabled by the application. The signal handler accessibility should not be dictated by whatever PKRU value the thread sets up.

The PKRU register is managed by XSAVE, which means the sigframe contents must match the register contents - which is not the case here. It's required that the signal frame contains the user-defined PKRU value (so that it is restored correctly from sigcontext) but the actual register must be reset to init_pkru so that the alt stack is accessible and the signal can be delivered to the application. It seems that the proper fix here would be to remove PKRU from the XSAVE framework and manage it separately, which is quite complicated. As a workaround, do this:

orig_pkru = rdpkru(); wrpkru(orig_pkru & init_pkru_value); xsave_to_user_sigframe(); put_user(pkru_sigframe_addr, orig_pkru)

In preparation for writing PKRU to sigframe, pass PKRU as an additional parameter down the call chain from get_sigframe().

No functional change.

Signed-off-by: Aruna Ramakrishna aruna.ramakrishna@oracle.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/all/20240802061318.2140081-2-aruna.ramakrishna@oracl... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/fpu/signal.h | 2 +- arch/x86/kernel/fpu/signal.c | 6 +++--- arch/x86/kernel/signal.c | 3 ++- 3 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/fpu/signal.h b/arch/x86/include/asm/fpu/signal.h index 611fa41711aff..eccc75bc9c4f3 100644 --- a/arch/x86/include/asm/fpu/signal.h +++ b/arch/x86/include/asm/fpu/signal.h @@ -29,7 +29,7 @@ fpu__alloc_mathframe(unsigned long sp, int ia32_frame,

unsigned long fpu__get_fpstate_size(void);

-extern bool copy_fpstate_to_sigframe(void __user *buf, void __user *fp, int size); +extern bool copy_fpstate_to_sigframe(void __user *buf, void __user *fp, int size, u32 pkru); extern void fpu__clear_user_states(struct fpu *fpu); extern bool fpu__restore_sig(void __user *buf, int ia32_frame);

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index 247f2225aa9f3..2b3b9e140dd41 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -156,7 +156,7 @@ static inline bool save_xstate_epilog(void __user *buf, int ia32_frame, return !err; }

-static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf) +static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf, u32 pkru) { if (use_xsave()) return xsave_to_user_sigframe(buf); @@ -185,7 +185,7 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf) * For [f]xsave state, update the SW reserved fields in the [f]xsave frame * indicating the absence/presence of the extended state to the user. */ -bool copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size) +bool copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size, u32 pkru) { struct task_struct *tsk = current; struct fpstate *fpstate = tsk->thread.fpu.fpstate; @@ -228,7 +228,7 @@ bool copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size) fpregs_restore_userregs();

pagefault_disable(); - ret = copy_fpregs_to_sigframe(buf_fx); + ret = copy_fpregs_to_sigframe(buf_fx, pkru); pagefault_enable(); fpregs_unlock();

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 65fe2094da59b..876d3b30c2c77 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -83,6 +83,7 @@ get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size, unsigned long math_size = 0; unsigned long sp = regs->sp; unsigned long buf_fx = 0; + u32 pkru = read_pkru();

/* redzone */ if (!ia32_frame) @@ -138,7 +139,7 @@ get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size, }

/* save i387 and extended state */ - if (!copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size)) + if (!copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size, pkru)) return (void __user *)-1L;

return (void __user *)sp;

From: Tao Liu ltao@redhat.com

[ Upstream commit 5760929f6545c651682de3c2c6c6786816b17bb1 ]

A kexec kernel boot failure is sometimes observed on AMD CPUs due to an unmapped EFI config table array. This can be seen when "nogbpages" is on the kernel command line, and has been observed as a full BIOS reboot rather than a successful kexec.

This was also the cause of reported regressions attributed to Commit 7143c5f4cf20 ("x86/mm/ident_map: Use gbpages only where full GB page should be mapped.") which was subsequently reverted.

To avoid this page fault, explicitly include the EFI config table array in the kexec identity map.

Further explanation:

The following 2 commits caused the EFI config table array to be accessed when enabling sev at kernel startup.

commit ec1c66af3a30 ("x86/compressed/64: Detect/setup SEV/SME features earlier during boot") commit c01fce9cef84 ("x86/compressed: Add SEV-SNP feature detection/setup")

This is in the code that examines whether SEV should be enabled or not, so it can even affect systems that are not SEV capable.

This may result in a page fault if the EFI config table array's address is unmapped. Since the page fault occurs before the new kernel establishes its own identity map and page fault routines, it is unrecoverable and kexec fails.

Most often, this problem is not seen because the EFI config table array gets included in the map by the luck of being placed at a memory address close enough to other memory areas that *are* included in the map created by kexec.

Both the "nogbpages" command line option and the "use gpbages only where full GB page should be mapped" change greatly reduce the chance of being included in the map by luck, which is why the problem appears.

Signed-off-by: Tao Liu ltao@redhat.com Signed-off-by: Steve Wahl steve.wahl@hpe.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Pavin Joseph me@pavinjoseph.com Tested-by: Sarah Brofeldt srhb@dbc.dk Tested-by: Eric Hagberg ehagberg@gmail.com Reviewed-by: Ard Biesheuvel ardb@kernel.org Link: https://lore.kernel.org/all/20240717213121.3064030-2-steve.wahl@hpe.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/machine_kexec_64.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)

diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index d287fe290c9ab..2fa12d1dc6760 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -28,6 +28,7 @@ #include <asm/setup.h> #include <asm/set_memory.h> #include <asm/cpu.h> +#include <asm/efi.h>

#ifdef CONFIG_ACPI /* @@ -90,6 +91,8 @@ map_efi_systab(struct x86_mapping_info *info, pgd_t *level4p) { #ifdef CONFIG_EFI unsigned long mstart, mend; + void *kaddr; + int ret;

if (!efi_enabled(EFI_BOOT)) return 0; @@ -105,6 +108,30 @@ map_efi_systab(struct x86_mapping_info *info, pgd_t *level4p) if (!mstart) return 0;

+ ret = kernel_ident_mapping_init(info, level4p, mstart, mend); + if (ret) + return ret; + + kaddr = memremap(mstart, mend - mstart, MEMREMAP_WB); + if (!kaddr) { + pr_err("Could not map UEFI system table\n"); + return -ENOMEM; + } + + mstart = efi_config_table; + + if (efi_enabled(EFI_64BIT)) { + efi_system_table_64_t *stbl = (efi_system_table_64_t *)kaddr; + + mend = mstart + sizeof(efi_config_table_64_t) * stbl->nr_tables; + } else { + efi_system_table_32_t *stbl = (efi_system_table_32_t *)kaddr; + + mend = mstart + sizeof(efi_config_table_32_t) * stbl->nr_tables; + } + + memunmap(kaddr); + return kernel_ident_mapping_init(info, level4p, mstart, mend); #endif return 0;

From: Takashi Iwai tiwai@suse.de

[ Upstream commit c01f3815453e2d5f699ccd8c8c1f93a5b8669e59 ]

The current MIDI input flush on HDSP and HDSPM drivers relies on the hardware reporting the right value. If the hardware doesn't give the proper value but returns -1, it may be stuck at an infinite loop.

Add a counter and break if the loop is unexpectedly too long.

Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/rme9652/hdsp.c | 6 ++++-- sound/pci/rme9652/hdspm.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index e7d1b43471a29..713ca262a0e97 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -1298,8 +1298,10 @@ static int snd_hdsp_midi_output_possible (struct hdsp *hdsp, int id)

static void snd_hdsp_flush_midi_input (struct hdsp *hdsp, int id) { - while (snd_hdsp_midi_input_available (hdsp, id)) - snd_hdsp_midi_read_byte (hdsp, id); + int count = 256; + + while (snd_hdsp_midi_input_available(hdsp, id) && --count) + snd_hdsp_midi_read_byte(hdsp, id); }

static int snd_hdsp_midi_output_write (struct hdsp_midi *hmidi) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 267c7848974ae..74215f57f4fc9 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -1838,8 +1838,10 @@ static inline int snd_hdspm_midi_output_possible (struct hdspm *hdspm, int id)

static void snd_hdspm_flush_midi_input(struct hdspm *hdspm, int id) { - while (snd_hdspm_midi_input_available (hdspm, id)) - snd_hdspm_midi_read_byte (hdspm, id); + int count = 256; + + while (snd_hdspm_midi_input_available(hdspm, id) && --count) + snd_hdspm_midi_read_byte(hdspm, id); }

static int snd_hdspm_midi_output_write (struct hdspm_midi *hmidi)

From: Thomas Weißschuh linux@weissschuh.net

[ Upstream commit f1a58f61d88642ae1e6e97e9d72d73bc70a93cb8 ]

Clang on higher optimization levels detects that NULL is passed to printf("%s") and warns about it. While printf() from nolibc gracefully handles that NULL, it is undefined behavior as per POSIX, so the warning is reasonable. Avoid the warning by transforming NULL into a non-NULL placeholder.

Reviewed-by: Shuah Khan skhan@linuxfoundation.org Acked-by: Willy Tarreau w@1wt.eu Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-8-c20f2f5fc7c2@weissschuh.... Signed-off-by: Thomas Weißschuh linux@weissschuh.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/nolibc/nolibc-test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 1fc4998f06bf6..4aaafbfc2f973 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -522,7 +522,7 @@ int expect_strzr(const char *expr, int llen) { int ret = 0;

- llen += printf(" = <%s> ", expr); + llen += printf(" = <%s> ", expr ? expr : "(null)"); if (expr) { ret = 1; result(llen, FAIL); @@ -541,7 +541,7 @@ int expect_strnz(const char *expr, int llen) { int ret = 0;

- llen += printf(" = <%s> ", expr); + llen += printf(" = <%s> ", expr ? expr : "(null)"); if (!expr) { ret = 1; result(llen, FAIL);

From: Denis Pauk pauk.denis@gmail.com

[ Upstream commit 1f432e4cf1dd3ecfec5ed80051b4611632a0fd51 ]

Boards G15CF has got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method.

Add the board to the WMI monitoring list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk pauk.denis@gmail.com Tested-by: Attila attila@fulop.one Message-ID: 20240812152652.1303-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/nct6775-platform.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c index 81bf03dad6bbc..706a662dd077d 100644 --- a/drivers/hwmon/nct6775-platform.c +++ b/drivers/hwmon/nct6775-platform.c @@ -1269,6 +1269,7 @@ static const char * const asus_msi_boards[] = { "EX-B760M-V5 D4", "EX-H510M-V3", "EX-H610M-V3 D4", + "G15CF", "PRIME A620M-A", "PRIME B560-PLUS", "PRIME B560-PLUS AC-HES",

From: Kaixin Wang kxwang23@m.fudan.edu.cn

[ Upstream commit 4a6921095eb04a900e0000da83d9475eb958e61e ]

In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work.

If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows:

CPU0 CPU1

| pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb

Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove.

Note that only root user can remove the driver at runtime.

Signed-off-by: Kaixin Wang kxwang23@m.fudan.edu.cn Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/pxafb.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c index fa943612c4e2b..3a2427eb29f23 100644 --- a/drivers/video/fbdev/pxafb.c +++ b/drivers/video/fbdev/pxafb.c @@ -2403,6 +2403,7 @@ static void pxafb_remove(struct platform_device *dev) info = &fbi->fb;

pxafb_overlay_exit(fbi); + cancel_work_sync(&fbi->task); unregister_framebuffer(info);

pxafb_disable_controller(fbi);

From: "Paul E. McKenney" paulmck@kernel.org

[ Upstream commit 11377947b5861fa59bf77c827e1dd7c081842cc9 ]

Currently, if the rcuscale module's async module parameter is specified for RCU implementations that do not have async primitives such as RCU Tasks Rude (which now lacks a call_rcu_tasks_rude() function), there will be a series of splats due to calls to a NULL pointer. This commit therefore warns of this situation, but switches to non-async testing.

Signed-off-by: "Paul E. McKenney" paulmck@kernel.org Signed-off-by: Neeraj Upadhyay neeraj.upadhyay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/rcu/rcuscale.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/rcu/rcuscale.c b/kernel/rcu/rcuscale.c index ffdb30495e3cc..ed46d9e8c0e43 100644 --- a/kernel/rcu/rcuscale.c +++ b/kernel/rcu/rcuscale.c @@ -498,7 +498,7 @@ rcu_scale_writer(void *arg) schedule_timeout_idle(torture_random(&tr) % writer_holdoff_jiffies + 1); wdp = &wdpp[i]; *wdp = ktime_get_mono_fast_ns(); - if (gp_async) { + if (gp_async && !WARN_ON_ONCE(!cur_ops->async)) { retry: if (!rhp) rhp = kmalloc(sizeof(*rhp), GFP_KERNEL); @@ -554,7 +554,7 @@ rcu_scale_writer(void *arg) i++; rcu_scale_wait_shutdown(); } while (!torture_must_stop()); - if (gp_async) { + if (gp_async && cur_ops->async) { cur_ops->gp_barrier(); } writer_n_durations[me] = i_max + 1;

From: Konrad Dybcio konrad.dybcio@linaro.org

[ Upstream commit 2d42d3ba443706c9164fa0bef4e5fd1c36bc1bd9 ]

SDM845's Adreno SMMU is unique in that it actually advertizes support for 16K (and 32M) pages, which doesn't hold for newer SoCs.

This however, seems either broken in the hardware implementation, the hypervisor middleware that abstracts the SMMU, or there's a bug in the Linux kernel somewhere down the line that nobody managed to track down.

Booting SDM845 with 16K page sizes and drm/msm results in:

*** gpu fault: ttbr0=0000000000000000 iova=000100000000c000 dir=READ type=TRANSLATION source=CP (0,0,0,0)

right after loading the firmware. The GPU then starts spitting out illegal intstruction errors, as it's quite obvious that it got a bogus pointer.

Moreover, it seems like this issue also concerns other implementations of SMMUv2 on Qualcomm SoCs, such as the one on SC7180.

Hide 16K support on such instances to work around this.

Reported-by: Sumit Semwal sumit.semwal@linaro.org Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240824-topic-845_gpu_smmu-v2-1-a302b8acc052@quic... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index b899a7b7fa935..db2092d5af5eb 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -341,6 +341,14 @@ static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) return 0; }

+static int qcom_adreno_smmuv2_cfg_probe(struct arm_smmu_device *smmu) +{ + /* Support for 16K pages is advertised on some SoCs, but it doesn't seem to work */ + smmu->features &= ~ARM_SMMU_FEAT_FMT_AARCH64_16K; + + return 0; +} + static void qcom_smmu_write_s2cr(struct arm_smmu_device *smmu, int idx) { struct arm_smmu_s2cr *s2cr = smmu->s2crs + idx; @@ -431,6 +439,7 @@ static const struct arm_smmu_impl sdm845_smmu_500_impl = {

static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = { .init_context = qcom_adreno_smmu_init_context, + .cfg_probe = qcom_adreno_smmuv2_cfg_probe, .def_domain_type = qcom_smmu_def_domain_type, .alloc_context_bank = qcom_adreno_smmu_alloc_context_bank, .write_sctlr = qcom_adreno_smmu_write_sctlr,

From: Lu Baolu baolu.lu@linux.intel.com

[ Upstream commit 2c13012e09190174614fd6901857a1b8c199e17d ]

We will use a global static identity domain. Reserve a static domain ID for it.

Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Reviewed-by: Kevin Tian kevin.tian@intel.com Reviewed-by: Jerry Snitselaar jsnitsel@redhat.com Link: https://lore.kernel.org/r/20240809055431.36513-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 9918af222c516..b7317016834cf 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -1692,10 +1692,10 @@ static int iommu_init_domains(struct intel_iommu *iommu) * entry for first-level or pass-through translation modes should * be programmed with a domain id different from those used for * second-level or nested translation. We reserve a domain id for - * this purpose. + * this purpose. This domain id is also used for identity domain + * in legacy mode. */ - if (sm_supported(iommu)) - set_bit(FLPT_DEFAULT_DID, iommu->domain_ids); + set_bit(FLPT_DEFAULT_DID, iommu->domain_ids);

return 0; }

From: Michal Koutný mkoutny@suse.com

[ Upstream commit 3c41382e920f1dd5c9f432948fe799c07af1cced ]

The configs that disable some v1 controllers would still allow mounting them but with no controller-specific files. (Making such hierarchies equivalent to named v1 hierarchies.) To achieve behavior consistent with actual out-compilation of a whole controller, the mounts should treat respective controllers as non-existent.

Wrap implementation into a helper function, leverage legacy_files to detect compiled out controllers. The effect is that mounts on v1 would fail and produce a message like: [ 1543.999081] cgroup: Unknown subsys name 'memory'

Signed-off-by: Michal Koutný mkoutny@suse.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cgroup/cgroup-v1.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index 9cb00ebe9ac6d..01149e47e1a72 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -46,6 +46,12 @@ bool cgroup1_ssid_disabled(int ssid) return cgroup_no_v1_mask & (1 << ssid); }

+static bool cgroup1_subsys_absent(struct cgroup_subsys *ss) +{ + /* Check also dfl_cftypes for file-less controllers, i.e. perf_event */ + return ss->legacy_cftypes == NULL && ss->dfl_cftypes; +} + /** * cgroup_attach_task_all - attach task 'tsk' to all cgroups of task 'from' * @from: attach to all cgroups of a given task @@ -932,7 +938,8 @@ int cgroup1_parse_param(struct fs_context *fc, struct fs_parameter *param) if (ret != -ENOPARAM) return ret; for_each_subsys(ss, i) { - if (strcmp(param->key, ss->legacy_name)) + if (strcmp(param->key, ss->legacy_name) || + cgroup1_subsys_absent(ss)) continue; if (!cgroup_ssid_enabled(i) || cgroup1_ssid_disabled(i)) return invalfc(fc, "Disabled controller '%s'", @@ -1024,7 +1031,8 @@ static int check_cgroupfs_options(struct fs_context *fc) mask = ~((u16)1 << cpuset_cgrp_id); #endif for_each_subsys(ss, i) - if (cgroup_ssid_enabled(i) && !cgroup1_ssid_disabled(i)) + if (cgroup_ssid_enabled(i) && !cgroup1_ssid_disabled(i) && + !cgroup1_subsys_absent(ss)) enabled |= 1 << i;

ctx->subsys_mask &= enabled;

From: Pierre-Eric Pelloux-Prayer pierre-eric.pelloux-prayer@amd.com

[ Upstream commit fec5f8e8c6bcf83ed7a392801d7b44c5ecfc1e82 ]

Before this commit, only submits with both a BO_HANDLES chunk and a 'bo_list_handle' would be rejected (by amdgpu_cs_parser_bos).

But if UMD sent multiple BO_HANDLES, what would happen is: * only the last one would be really used * all the others would leak memory as amdgpu_cs_p1_bo_handles would overwrite the previous p->bo_list value

This commit rejects submissions with multiple BO_HANDLES chunks to match the implementation of the parser.

Signed-off-by: Pierre-Eric Pelloux-Prayer pierre-eric.pelloux-prayer@amd.com Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index e361dc37a0890..7abcd618e70bd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -263,6 +263,10 @@ static int amdgpu_cs_pass1(struct amdgpu_cs_parser *p, if (size < sizeof(struct drm_amdgpu_bo_list_in)) goto free_partial_kdata;

+ /* Only a single BO list is allowed to simplify handling. */ + if (p->bo_list) + ret = -EINVAL; + ret = amdgpu_cs_p1_bo_handles(p, p->chunks[i].kdata); if (ret) goto free_partial_kdata;

From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com

[ Upstream commit 66d71a72539e173a9b00ca0b1852cbaa5f5bf1ad ]

This commit addresses a null pointer dereference issue in the `commit_planes_for_stream` function at line 4140. The issue could occur when `top_pipe_to_program` is null.

The fix adds a check to ensure `top_pipe_to_program` is not null before accessing its stream_res. This prevents a null pointer dereference.

Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906)

Cc: Tom Chung chiahsuan.chung@amd.com Cc: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Cc: Roman Li roman.li@amd.com Cc: Alex Hung alex.hung@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Harry Wentland harry.wentland@amd.com Cc: Hamza Mahfooz hamza.mahfooz@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 50e643bfdfbad..0b2eb2a6c8e14 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -3797,7 +3797,8 @@ static void commit_planes_for_stream(struct dc *dc, }

if ((update_type != UPDATE_TYPE_FAST) && stream->update_flags.bits.dsc_changed) - if (top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) { + if (top_pipe_to_program && + top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) { top_pipe_to_program->stream_res.tg->funcs->wait_for_state( top_pipe_to_program->stream_res.tg, CRTC_STATE_VACTIVE);

From: Damien Le Moal dlemoal@kernel.org

[ Upstream commit 93b0f9e11ce511353c65b7f924cf5f95bd9c3aba ]

Rename the array sil_blacklist to sil_quirks as this name is more neutral and is also consistent with how this driver define quirks with the SIL_QUIRK_XXX flags.

Signed-off-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Niklas Cassel cassel@kernel.org Reviewed-by: Igor Pylypiv ipylypiv@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/sata_sil.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index cc77c02482843..df095659bae0f 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -128,7 +128,7 @@ static const struct pci_device_id sil_pci_tbl[] = { static const struct sil_drivelist { const char *product; unsigned int quirk; -} sil_blacklist [] = { +} sil_quirks[] = { { "ST320012AS", SIL_QUIRK_MOD15WRITE }, { "ST330013AS", SIL_QUIRK_MOD15WRITE }, { "ST340017AS", SIL_QUIRK_MOD15WRITE }, @@ -600,8 +600,8 @@ static void sil_thaw(struct ata_port *ap) * list, and apply the fixups to only the specific * devices/hosts/firmwares that need it. * - * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted - * The Maxtor quirk is in the blacklist, but I'm keeping the original + * 20040111 - Seagate drives affected by the Mod15Write bug are quirked + * The Maxtor quirk is in sil_quirks, but I'm keeping the original * pessimistic fix for the following reasons... * - There seems to be less info on it, only one device gleaned off the * Windows driver, maybe only one is affected. More info would be greatly @@ -620,9 +620,9 @@ static void sil_dev_config(struct ata_device *dev)

ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));

- for (n = 0; sil_blacklist[n].product; n++) - if (!strcmp(sil_blacklist[n].product, model_num)) { - quirks = sil_blacklist[n].quirk; + for (n = 0; sil_quirks[n].product; n++) + if (!strcmp(sil_quirks[n].product, model_num)) { + quirks = sil_quirks[n].quirk; break; }

From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com

[ Upstream commit 8141f21b941710ecebe49220b69822cab3abd23d ]

This commit adds a null check for 'stream_status' in the function 'planes_changed_for_existing_stream'. Previously, the code assumed 'stream_status' could be null, but did not handle the case where it was actually null. This could lead to a null pointer dereference.

Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774)

Cc: Tom Chung chiahsuan.chung@amd.com Cc: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Cc: Roman Li roman.li@amd.com Cc: Alex Hung alex.hung@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Harry Wentland harry.wentland@amd.com Cc: Hamza Mahfooz hamza.mahfooz@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 733e445331ea5..4b34bc9d4e4be 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -2877,8 +2877,10 @@ static bool planes_changed_for_existing_stream(struct dc_state *context, } }

- if (!stream_status) + if (!stream_status) { ASSERT(0); + return false; + }

for (i = 0; i < set_count; i++) if (set[i].stream == stream)

From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com

[ Upstream commit cd9e9e0852d501f169aa3bb34e4b413d2eb48c37 ]

This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference.

Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex)

Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)

Cc: Tom Chung chiahsuan.chung@amd.com Cc: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Cc: Roman Li roman.li@amd.com Cc: Alex Hung alex.hung@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Harry Wentland harry.wentland@amd.com Co-developed-by: Alex Hung alex.hung@amd.com Signed-off-by: Alex Hung alex.hung@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c index fa9f53b310793..d1329f20b7bd4 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c @@ -1281,7 +1281,8 @@ void amdgpu_dm_plane_handle_cursor_update(struct drm_plane *plane, adev->dm.dc->caps.color.dpp.gamma_corr) attributes.attribute_flags.bits.ENABLE_CURSOR_DEGAMMA = 1;

- attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0]; + if (afb) + attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0];

if (crtc_state->stream) { mutex_lock(&adev->dm.dc_lock);

From: Remington Brasga rbrasga@uci.edu

[ Upstream commit b0b2fc815e514221f01384f39fbfbff65d897e1c ]

Fix issue with UBSAN throwing shift-out-of-bounds warning.

Reported-by: syzbot+e38d703eeb410b17b473@syzkaller.appspotmail.com Signed-off-by: Remington Brasga rbrasga@uci.edu Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_dmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 5713994328cbc..ccdfa38d7a682 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -3022,7 +3022,7 @@ static int dbFindBits(u32 word, int l2nb)

/* scan the word for nb free bits at nb alignments. */ - for (bitno = 0; mask != 0; bitno += nb, mask >>= nb) { + for (bitno = 0; mask != 0; bitno += nb, mask = (mask >> nb)) { if ((mask & word) == mask) break; }

From: Edward Adam Davis eadavis@qq.com

[ Upstream commit d64ff0d2306713ff084d4b09f84ed1a8c75ecc32 ]

syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf.

Shaggy: Modified sanity check to apply to control pages as well as leaf pages.

Reported-and-tested-by: syzbot+dca05492eff41f604890@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dca05492eff41f604890 Signed-off-by: Edward Adam Davis eadavis@qq.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_dmap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index ccdfa38d7a682..53904e06d843b 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -2944,9 +2944,10 @@ static void dbAdjTree(dmtree_t *tp, int leafno, int newval, bool is_ctl) static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl) { int ti, n = 0, k, x = 0; - int max_size; + int max_size, max_idx;

max_size = is_ctl ? CTLTREESIZE : TREESIZE; + max_idx = is_ctl ? LPERCTL : LPERDMAP;

/* first check the root of the tree to see if there is * sufficient free space. @@ -2978,6 +2979,8 @@ static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl) */ assert(n < 4); } + if (le32_to_cpu(tp->dmt_leafidx) >= max_idx) + return -ENOSPC;

/* set the return to the leftmost leaf describing sufficient * free space.

From: Konrad Dybcio konrad.dybcio@linaro.org

[ Upstream commit 16007768551d5bfe53426645401435ca8d2ef54f ]

There are some cases, such as the one uncovered by Commit 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") where

msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);

is called on gpu->pdev == NULL, as the GPU device has not been fully initialized yet.

Turns out that there's more than just the aforementioned path that causes this to happen (e.g. the case when there's speedbin data in the catalog, but opp-supported-hw is missing in DT).

Assigning msm_gpu->pdev earlier seems like the least painful solution to this, therefore do so.

Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/602742/ Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 1 + drivers/gpu/drm/msm/msm_gpu.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 8090dde032808..00419e0693419 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -1071,6 +1071,7 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, adreno_gpu->chip_id = config->chip_id;

gpu->allow_relocs = config->info->family < ADRENO_6XX_GEN1; + gpu->pdev = pdev;

/* Only handle the core clock when GMU is not in use (or is absent). */ if (adreno_has_gmu_wrapper(adreno_gpu) || diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c index 5c10b559a5957..5a7541597d0ce 100644 --- a/drivers/gpu/drm/msm/msm_gpu.c +++ b/drivers/gpu/drm/msm/msm_gpu.c @@ -927,7 +927,6 @@ int msm_gpu_init(struct drm_device *drm, struct platform_device *pdev, if (IS_ERR(gpu->gpu_cx)) gpu->gpu_cx = NULL;

- gpu->pdev = pdev; platform_set_drvdata(pdev, &gpu->adreno_smmu);

msm_devfreq_init(gpu);

From: Peng Liu liupeng01@kylinos.cn

[ Upstream commit 0126c0ae11e8b52ecfde9d1b174ee2f32d6c3a5d ]

Fix screen corruption with openkylin.

Link: https://bbs.openkylin.top/t/topic/171497 Signed-off-by: Peng Liu liupeng01@kylinos.cn Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 8168836a08d2e..c28e7ff6ede26 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -1172,6 +1172,8 @@ static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = { { 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc6 }, /* Apple MacBook Pro (15-inch, 2019) Radeon Pro Vega 20 4 GB */ { 0x1002, 0x69af, 0x106b, 0x019a, 0xc0 }, + /* https://bbs.openkylin.top/t/topic/171497 */ + { 0x1002, 0x15d8, 0x19e5, 0x3e14, 0xc2 }, { 0, 0, 0, 0, 0 }, };

From: Jesse Zhang jesse.zhang@amd.com

[ Upstream commit aa47fe8d3595365a935921a90d00bc33ee374728 ]

To avoid memory leaks, release q_extra_data when exiting the restore queue. v2: Correct the proto (Alex)

Signed-off-by: Jesse Zhang jesse.zhang@amd.com Reviewed-by: Tim Huang tim.huang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c index dbc75ca84375a..0583af4e84fa3 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c @@ -982,6 +982,7 @@ int kfd_criu_restore_queue(struct kfd_process *p, pr_debug("Queue id %d was restored successfully\n", queue_id);

kfree(q_data); + kfree(q_extra_data);

return ret; }

From: Ckath ckath@yandex.ru

[ Upstream commit c11619af35bae5884029bd14170c3e4b55ddf6f3 ]

Add touschscreen info for the nanote next (UMPC-03-SR).

After checking with multiple owners the DMI info really is this generic.

Signed-off-by: Ckath ckath@yandex.ru Link: https://lore.kernel.org/r/e8dda83a-10ae-42cf-a061-5d29be0d193a@yandex.ru Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 06ebab520f271..30c05a9948319 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -885,6 +885,21 @@ static const struct ts_dmi_data rwc_nanote_p8_data = { .properties = rwc_nanote_p8_props, };

+static const struct property_entry rwc_nanote_next_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 5), + PROPERTY_ENTRY_U32("touchscreen-min-y", 5), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1785), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1145), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-next.fw"), + { } +}; + +static const struct ts_dmi_data rwc_nanote_next_data = { + .acpi_name = "MSSL1680:00", + .properties = rwc_nanote_next_props, +}; + static const struct property_entry schneider_sct101ctm_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1715), PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), @@ -1648,6 +1663,17 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_SKU, "0001") }, }, + { + /* RWC NANOTE NEXT */ + .driver_data = (void *)&rwc_nanote_next_data, + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "To be filled by O.E.M."), + DMI_MATCH(DMI_BOARD_NAME, "To be filled by O.E.M."), + DMI_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."), + /* Above matches are too generic, add bios-version match */ + DMI_MATCH(DMI_BIOS_VERSION, "S8A70R100-V005"), + }, + }, { /* Schneider SCT101CTM */ .driver_data = (void *)&schneider_sct101ctm_data,

From: Alex Hung alex.hung@amd.com

[ Upstream commit 35ff747c86767937ee1e0ca987545b7eed7a0810 ]

[WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them.

This fixes 1 FORWARD_NULL issue reported by Coverity.

Reviewed-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Signed-off-by: Jerry Zuo jerry.zuo@amd.com Signed-off-by: Alex Hung alex.hung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 4b34bc9d4e4be..99fcd39bb15e0 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -2154,6 +2154,8 @@ static bool are_stream_backends_same( bool dc_is_stream_unchanged( struct dc_stream_state *old_stream, struct dc_stream_state *stream) { + if (!old_stream || !stream) + return false;

if (!are_stream_backends_same(old_stream, stream)) return false;

From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com

[ Upstream commit bc50b614d59990747dd5aeced9ec22f9258991ff ]

This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error.

Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung chiahsuan.chung@amd.com Cc: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Cc: Roman Li roman.li@amd.com Cc: Alex Hung alex.hung@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Harry Wentland harry.wentland@amd.com Cc: Hamza Mahfooz hamza.mahfooz@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c index e0df9b0065f9c..e0b1fc92ed186 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c @@ -355,6 +355,8 @@ bool cm3_helper_translate_curve_to_degamma_hw_format( i += increment) { if (j == hw_points - 1) break; + if (i >= TRANSFER_FUNC_POINTS) + return false; rgb_resulted[j].red = output_tf->tf_pts.red[i]; rgb_resulted[j].green = output_tf->tf_pts.green[i]; rgb_resulted[j].blue = output_tf->tf_pts.blue[i];

From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com

[ Upstream commit d81873f9e715b72d4f8d391c8eb243946f784dfc ]

This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung chiahsuan.chung@amd.com Cc: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Cc: Roman Li roman.li@amd.com Cc: Alex Hung alex.hung@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Harry Wentland harry.wentland@amd.com Cc: Hamza Mahfooz hamza.mahfooz@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c index e0b1fc92ed186..62c02adae7e76 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c @@ -178,6 +178,8 @@ bool cm3_helper_translate_curve_to_hw_format( i += increment) { if (j == hw_points - 1) break; + if (i >= TRANSFER_FUNC_POINTS) + return false; rgb_resulted[j].red = output_tf->tf_pts.red[i]; rgb_resulted[j].green = output_tf->tf_pts.green[i]; rgb_resulted[j].blue = output_tf->tf_pts.blue[i];

From: Alex Hung alex.hung@amd.com

[ Upstream commit 4067f4fa0423a89fb19a30b57231b384d77d2610 ]

Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0.

This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

Signed-off-by: Alex Hung alex.hung@amd.com Reviewed-by: Aurabindo Pillai aurabindo.pillai@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 2 +- .../gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c index 0fc9f3e3ffaef..f603486af6e30 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c @@ -78,7 +78,7 @@ static void calculate_ttu_cursor(struct display_mode_lib *mode_lib,

static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1;

if (source_format == dm_444_16) { if (!is_chroma) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c index 618f4b682ab1b..9f28e4d3c664c 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c @@ -53,7 +53,7 @@ static void calculate_ttu_cursor(

static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1;

if (source_format == dm_444_16) { if (!is_chroma)

From: Andrii Nakryiko andrii@kernel.org

[ Upstream commit cfa7f3d2c526c224a6271cc78a4a27a0de06f4f0 ]

When tracing user functions with uprobe functionality, it's common to install the probe (e.g., a BPF program) at the first instruction of the function. This is often going to be `push %rbp` instruction in function preamble, which means that within that function frame pointer hasn't been established yet. This leads to consistently missing an actual caller of the traced function, because perf_callchain_user() only records current IP (capturing traced function) and then following frame pointer chain (which would be caller's frame, containing the address of caller's caller).

So when we have target_1 -> target_2 -> target_3 call chain and we are tracing an entry to target_3, captured stack trace will report target_1 -> target_3 call chain, which is wrong and confusing.

This patch proposes a x86-64-specific heuristic to detect `push %rbp` (`push %ebp` on 32-bit architecture) instruction being traced. Given entire kernel implementation of user space stack trace capturing works under assumption that user space code was compiled with frame pointer register (%rbp/%ebp) preservation, it seems pretty reasonable to use this instruction as a strong indicator that this is the entry to the function. In that case, return address is still pointed to by %rsp/%esp, so we fetch it and add to stack trace before proceeding to unwind the rest using frame pointer-based logic.

We also check for `endbr64` (for 64-bit modes) as another common pattern for function entry, as suggested by Josh Poimboeuf. Even if we get this wrong sometimes for uprobes attached not at the function entry, it's OK because stack trace will still be overall meaningful, just with one extra bogus entry. If we don't detect this, we end up with guaranteed to be missing caller function entry in the stack trace, which is worse overall.

Signed-off-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/core.c | 63 +++++++++++++++++++++++++++++++++++++++++ include/linux/uprobes.h | 2 ++ kernel/events/uprobes.c | 2 ++ 3 files changed, 67 insertions(+)

diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 8811fedc9776a..150a365b4fbc8 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -41,6 +41,8 @@ #include <asm/desc.h> #include <asm/ldt.h> #include <asm/unwind.h> +#include <asm/uprobes.h> +#include <asm/ibt.h>

#include "perf_event.h"

@@ -2816,6 +2818,46 @@ static unsigned long get_segment_base(unsigned int segment) return get_desc_base(desc); }

+#ifdef CONFIG_UPROBES +/* + * Heuristic-based check if uprobe is installed at the function entry. + * + * Under assumption of user code being compiled with frame pointers, + * `push %rbp/%ebp` is a good indicator that we indeed are. + * + * Similarly, `endbr64` (assuming 64-bit mode) is also a common pattern. + * If we get this wrong, captured stack trace might have one extra bogus + * entry, but the rest of stack trace will still be meaningful. + */ +static bool is_uprobe_at_func_entry(struct pt_regs *regs) +{ + struct arch_uprobe *auprobe; + + if (!current->utask) + return false; + + auprobe = current->utask->auprobe; + if (!auprobe) + return false; + + /* push %rbp/%ebp */ + if (auprobe->insn[0] == 0x55) + return true; + + /* endbr64 (64-bit only) */ + if (user_64bit_mode(regs) && is_endbr(*(u32 *)auprobe->insn)) + return true; + + return false; +} + +#else +static bool is_uprobe_at_func_entry(struct pt_regs *regs) +{ + return false; +} +#endif /* CONFIG_UPROBES */ + #ifdef CONFIG_IA32_EMULATION

#include <linux/compat.h> @@ -2827,6 +2869,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry_ctx *ent unsigned long ss_base, cs_base; struct stack_frame_ia32 frame; const struct stack_frame_ia32 __user *fp; + u32 ret_addr;

if (user_64bit_mode(regs)) return 0; @@ -2836,6 +2879,12 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry_ctx *ent

fp = compat_ptr(ss_base + regs->bp); pagefault_disable(); + + /* see perf_callchain_user() below for why we do this */ + if (is_uprobe_at_func_entry(regs) && + !get_user(ret_addr, (const u32 __user *)regs->sp)) + perf_callchain_store(entry, ret_addr); + while (entry->nr < entry->max_stack) { if (!valid_user_frame(fp, sizeof(frame))) break; @@ -2864,6 +2913,7 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs { struct stack_frame frame; const struct stack_frame __user *fp; + unsigned long ret_addr;

if (perf_guest_state()) { /* TODO: We don't support guest os callchain now */ @@ -2887,6 +2937,19 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs return;

pagefault_disable(); + + /* + * If we are called from uprobe handler, and we are indeed at the very + * entry to user function (which is normally a `push %rbp` instruction, + * under assumption of application being compiled with frame pointers), + * we should read return address from *regs->sp before proceeding + * to follow frame pointers, otherwise we'll skip immediate caller + * as %rbp is not yet setup. + */ + if (is_uprobe_at_func_entry(regs) && + !get_user(ret_addr, (const unsigned long __user *)regs->sp)) + perf_callchain_store(entry, ret_addr); + while (entry->nr < entry->max_stack) { if (!valid_user_frame(fp, sizeof(frame))) break; diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index f46e0ca0169c7..d91e32aff5a13 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -76,6 +76,8 @@ struct uprobe_task { struct uprobe *active_uprobe; unsigned long xol_vaddr;

+ struct arch_uprobe *auprobe; + struct return_instance *return_instances; unsigned int depth; }; diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 4705571f80345..6876b7f152b10 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -2071,6 +2071,7 @@ static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs) bool need_prep = false; /* prepare return uprobe, when needed */

down_read(&uprobe->register_rwsem); + current->utask->auprobe = &uprobe->arch; for (uc = uprobe->consumers; uc; uc = uc->next) { int rc = 0;

@@ -2085,6 +2086,7 @@ static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)

remove &= rc; } + current->utask->auprobe = NULL;

if (need_prep && !remove) prepare_uretprobe(uprobe, regs); /* put bp at return */

From: Justin Tee justin.tee@broadcom.com

[ Upstream commit 1f0f7679ad8942f810b0f19ee9cf098c3502d66a ]

A kref imbalance occurs when handling an unsolicited PRLO in direct attached topology.

Rework PRLO rcv handling when in MAPPED state. Save the state that we were handling a PRLO by setting nlp_last_elscmd to ELS_CMD_PRLO. Then in the lpfc_cmpl_els_logo_acc() completion routine, manually restart discovery. By issuing the PLOGI, which nlp_gets, before nlp_put at the end of the lpfc_cmpl_els_logo_acc() routine, we are saving us from a final nlp_put. And, we are still allowing the unreg_rpi to happen.

Signed-off-by: Justin Tee justin.tee@broadcom.com Link: https://lore.kernel.org/r/20240726231512.92867-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_els.c | 27 ++++++++++++++++----------- drivers/scsi/lpfc/lpfc_nportdisc.c | 22 ++++++++++++++++++++-- 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 44d3ada9fbbcb..f67d72160d36e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5228,9 +5228,10 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* ACC to LOGO completes to NPort <nlp_DID> */ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, "0109 ACC to LOGO completes to NPort x%x refcnt %d " - "Data: x%x x%x x%x\n", - ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp->nlp_flag, - ndlp->nlp_state, ndlp->nlp_rpi); + "last els x%x Data: x%x x%x x%x\n", + ndlp->nlp_DID, kref_read(&ndlp->kref), + ndlp->nlp_last_elscmd, ndlp->nlp_flag, ndlp->nlp_state, + ndlp->nlp_rpi);

/* This clause allows the LOGO ACC to complete and free resources * for the Fabric Domain Controller. It does deliberately skip @@ -5242,18 +5243,22 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out;

if (ndlp->nlp_state == NLP_STE_NPR_NODE) { - /* If PLOGI is being retried, PLOGI completion will cleanup the - * node. The NLP_NPR_2B_DISC flag needs to be retained to make - * progress on nodes discovered from last RSCN. - */ - if ((ndlp->nlp_flag & NLP_DELAY_TMO) && - (ndlp->nlp_last_elscmd == ELS_CMD_PLOGI)) - goto out; - if (ndlp->nlp_flag & NLP_RPI_REGISTERED) lpfc_unreg_rpi(vport, ndlp);

+ /* If came from PRLO, then PRLO_ACC is done. + * Start rediscovery now. + */ + if (ndlp->nlp_last_elscmd == ELS_CMD_PRLO) { + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(&ndlp->lock); + ndlp->nlp_prev_state = ndlp->nlp_state; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_PLOGI_ISSUE); + lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0); + } } + out: /* * The driver received a LOGO from the rport and has ACK'd it. diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 3ed211d093dd1..fe174062e4946 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -2635,8 +2635,26 @@ lpfc_rcv_prlo_mapped_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, /* flush the target */ lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT);

- /* Treat like rcv logo */ - lpfc_rcv_logo(vport, ndlp, cmdiocb, ELS_CMD_PRLO); + /* Send PRLO_ACC */ + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag |= NLP_LOGO_ACC; + spin_unlock_irq(&ndlp->lock); + lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL); + + /* Save ELS_CMD_PRLO as the last elscmd and then set to NPR. + * lpfc_cmpl_els_logo_acc is expected to restart discovery. + */ + ndlp->nlp_last_elscmd = ELS_CMD_PRLO; + ndlp->nlp_prev_state = ndlp->nlp_state; + + lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_ELS | LOG_DISCOVERY, + "3422 DID x%06x nflag x%x lastels x%x ref cnt %u\n", + ndlp->nlp_DID, ndlp->nlp_flag, + ndlp->nlp_last_elscmd, + kref_read(&ndlp->kref)); + + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + return ndlp->nlp_state; }

From: Peter Zijlstra peterz@infradead.org

[ Upstream commit 558abc7e3f895049faa46b08656be4c60dc6e9fd ]

All the event_function/@func call context already uses perf_ctx_lock() except for the !ctx->is_active case. Make it all consistent.

Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Kan Liang kan.liang@linux.intel.com Reviewed-by: Namhyung Kim namhyung@kernel.org Link: https://lore.kernel.org/r/20240807115550.138301094@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/events/core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c index d40809bdf4b30..18eab7f50ecce 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -263,6 +263,7 @@ static int event_function(void *info) static void event_function_call(struct perf_event *event, event_f func, void *data) { struct perf_event_context *ctx = event->ctx; + struct perf_cpu_context *cpuctx = this_cpu_ptr(&perf_cpu_context); struct task_struct *task = READ_ONCE(ctx->task); /* verified in event_function */ struct event_function_struct efs = { .event = event, @@ -291,22 +292,22 @@ static void event_function_call(struct perf_event *event, event_f func, void *da if (!task_function_call(task, event_function, &efs)) return;

- raw_spin_lock_irq(&ctx->lock); + perf_ctx_lock(cpuctx, ctx); /* * Reload the task pointer, it might have been changed by * a concurrent perf_event_context_sched_out(). */ task = ctx->task; if (task == TASK_TOMBSTONE) { - raw_spin_unlock_irq(&ctx->lock); + perf_ctx_unlock(cpuctx, ctx); return; } if (ctx->is_active) { - raw_spin_unlock_irq(&ctx->lock); + perf_ctx_unlock(cpuctx, ctx); goto again; } func(event, NULL, ctx, data); - raw_spin_unlock_irq(&ctx->lock); + perf_ctx_unlock(cpuctx, ctx); }

/*

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit c6dbab46324b1742b50dc2fb5c1fee2c28129439 ]

With -Werror:

In function ‘r100_cp_init_microcode’, inlined from ‘r100_cp_init’ at drivers/gpu/drm/radeon/r100.c:1136:7: include/linux/printk.h:465:44: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 465 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__) | ^ include/linux/printk.h:437:17: note: in definition of macro ‘printk_index_wrap’ 437 | _p_func(_fmt, ##__VA_ARGS__); \ | ^~~~~~~ include/linux/printk.h:508:9: note: in expansion of macro ‘printk’ 508 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) | ^~~~~~ drivers/gpu/drm/radeon/r100.c:1062:17: note: in expansion of macro ‘pr_err’ 1062 | pr_err("radeon_cp: Failed to load firmware "%s"\n", fw_name); | ^~~~~~

Fix this by converting the if/else if/... construct into a proper switch() statement with a default to handle the error case.

As a bonus, the generated code is ca. 100 bytes smaller (with gcc 11.4.0 targeting arm32).

Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/r100.c | 70 ++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index cfeca2694d5f9..b63b6b4e9b281 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1015,45 +1015,65 @@ static int r100_cp_init_microcode(struct radeon_device *rdev)

DRM_DEBUG_KMS("\n");

- if ((rdev->family == CHIP_R100) || (rdev->family == CHIP_RV100) || - (rdev->family == CHIP_RV200) || (rdev->family == CHIP_RS100) || - (rdev->family == CHIP_RS200)) { + switch (rdev->family) { + case CHIP_R100: + case CHIP_RV100: + case CHIP_RV200: + case CHIP_RS100: + case CHIP_RS200: DRM_INFO("Loading R100 Microcode\n"); fw_name = FIRMWARE_R100; - } else if ((rdev->family == CHIP_R200) || - (rdev->family == CHIP_RV250) || - (rdev->family == CHIP_RV280) || - (rdev->family == CHIP_RS300)) { + break; + + case CHIP_R200: + case CHIP_RV250: + case CHIP_RV280: + case CHIP_RS300: DRM_INFO("Loading R200 Microcode\n"); fw_name = FIRMWARE_R200; - } else if ((rdev->family == CHIP_R300) || - (rdev->family == CHIP_R350) || - (rdev->family == CHIP_RV350) || - (rdev->family == CHIP_RV380) || - (rdev->family == CHIP_RS400) || - (rdev->family == CHIP_RS480)) { + break; + + case CHIP_R300: + case CHIP_R350: + case CHIP_RV350: + case CHIP_RV380: + case CHIP_RS400: + case CHIP_RS480: DRM_INFO("Loading R300 Microcode\n"); fw_name = FIRMWARE_R300; - } else if ((rdev->family == CHIP_R420) || - (rdev->family == CHIP_R423) || - (rdev->family == CHIP_RV410)) { + break; + + case CHIP_R420: + case CHIP_R423: + case CHIP_RV410: DRM_INFO("Loading R400 Microcode\n"); fw_name = FIRMWARE_R420; - } else if ((rdev->family == CHIP_RS690) || - (rdev->family == CHIP_RS740)) { + break; + + case CHIP_RS690: + case CHIP_RS740: DRM_INFO("Loading RS690/RS740 Microcode\n"); fw_name = FIRMWARE_RS690; - } else if (rdev->family == CHIP_RS600) { + break; + + case CHIP_RS600: DRM_INFO("Loading RS600 Microcode\n"); fw_name = FIRMWARE_RS600; - } else if ((rdev->family == CHIP_RV515) || - (rdev->family == CHIP_R520) || - (rdev->family == CHIP_RV530) || - (rdev->family == CHIP_R580) || - (rdev->family == CHIP_RV560) || - (rdev->family == CHIP_RV570)) { + break; + + case CHIP_RV515: + case CHIP_R520: + case CHIP_RV530: + case CHIP_R580: + case CHIP_RV560: + case CHIP_RV570: DRM_INFO("Loading R500 Microcode\n"); fw_name = FIRMWARE_R520; + break; + + default: + DRM_ERROR("Unsupported Radeon family %u\n", rdev->family); + return -EINVAL; }

err = request_firmware(&rdev->me_fw, fw_name, rdev->dev);

From: Alex Deucher alexander.deucher@amd.com

[ Upstream commit 3ec2ad7c34c412bd9264cd1ff235d0812be90e82 ]

Protect the MMIO access with safe mode.

Acked-by: Vitaly Prosyak vitaly.prosyak@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 00e693c47f3cc..895060f6948f3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -5709,7 +5709,9 @@ static void gfx_v9_0_ring_soft_recovery(struct amdgpu_ring *ring, unsigned vmid) value = REG_SET_FIELD(value, SQ_CMD, MODE, 0x01); value = REG_SET_FIELD(value, SQ_CMD, CHECK_VMID, 1); value = REG_SET_FIELD(value, SQ_CMD, VM_ID, vmid); + amdgpu_gfx_rlc_enter_safe_mode(adev, 0); WREG32_SOC15(GC, 0, mmSQ_CMD, value); + amdgpu_gfx_rlc_exit_safe_mode(adev, 0); }

static void gfx_v9_0_set_gfx_eop_interrupt_state(struct amdgpu_device *adev,

From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 39ab331ab5d377a18fbf5a0e0b228205edfcc7f4 ]

Replace two open-coded calculations of the buffer size by invocations of sizeof() on the buffer itself, to make sure the code will always use the actual buffer size.

Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/817c0b9626fd30790fc488c472a3398324cfcc0c.172415612... Signed-off-by: Rob Herring (Arm) robh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/of/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 8fd63100ba8f0..d67b69cb84bfe 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -357,8 +357,8 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar addr = of_get_property(device, "reg", &addr_len);

/* Prevent out-of-bounds read in case of longer interrupt parent address size */ - if (addr_len > (3 * sizeof(__be32))) - addr_len = 3 * sizeof(__be32); + if (addr_len > sizeof(addr_buf)) + addr_len = sizeof(addr_buf); if (addr) memcpy(addr_buf, addr, addr_len);

From: Alex Deucher alexander.deucher@amd.com

[ Upstream commit 3f2d35c325534c1b7ac5072173f0dc7ca969dec2 ]

Protect the MMIO access with safe mode.

Acked-by: Vitaly Prosyak vitaly.prosyak@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c index c813cd7b015e1..54ec9b32562c2 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c @@ -5701,7 +5701,9 @@ static void gfx_v11_0_ring_soft_recovery(struct amdgpu_ring *ring, value = REG_SET_FIELD(value, SQ_CMD, MODE, 0x01); value = REG_SET_FIELD(value, SQ_CMD, CHECK_VMID, 1); value = REG_SET_FIELD(value, SQ_CMD, VM_ID, vmid); + amdgpu_gfx_rlc_enter_safe_mode(adev, 0); WREG32_SOC15(GC, 0, regSQ_CMD, value); + amdgpu_gfx_rlc_exit_safe_mode(adev, 0); }

static void

From: Gergo Koteles soyer@irl.hu

[ Upstream commit d9dca215708d32e7f88ac0591fbb187cbf368adb ]

While booting, Lenovo 14ARB7 reports 'lenovo-ymc: Unknown key 0 pressed' warning. This is caused by lenovo_ymc_probe() calling lenovo_ymc_notify() at probe time to get the initial tablet-mode-switch state and the key-code lenovo_ymc_notify() reads from the firmware is not initialized at probe time yet on the Lenovo 14ARB7.

The hardware/firmware does an ACPI notify on the WMI device itself when it initializes the tablet-mode-switch state later on.

Add 0x0 YMC state to the sparse keymap to silence the warning.

Signed-off-by: Gergo Koteles soyer@irl.hu Link: https://lore.kernel.org/r/08ab73bb74c4ad448409f2ce707b1148874a05ce.172434056... [hdegoede@redhat.com: Reword commit message] Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/lenovo-ymc.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/lenovo-ymc.c b/drivers/platform/x86/lenovo-ymc.c index e1fbc35504d49..ef2c267ab485c 100644 --- a/drivers/platform/x86/lenovo-ymc.c +++ b/drivers/platform/x86/lenovo-ymc.c @@ -78,6 +78,8 @@ static void lenovo_ymc_trigger_ec(struct wmi_device *wdev, struct lenovo_ymc_pri }

static const struct key_entry lenovo_ymc_keymap[] = { + /* Ignore the uninitialized state */ + { KE_IGNORE, 0x00 }, /* Laptop */ { KE_SW, 0x01, { .sw = { SW_TABLET_MODE, 0 } } }, /* Tablet */

From: Jan Kara jack@suse.cz

[ Upstream commit d3476f3dad4ad68ae5f6b008ea6591d1520da5d8 ]

When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that.

Link: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com Reported-by: Christian Brauner brauner@kernel.org Signed-off-by: Jan Kara jack@suse.cz Reviewed-by: Christian Brauner brauner@kernel.org Link: https://patch.msgid.link/20240805201241.27286-1-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 5baacb3058abd..b7d8abef2beba 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -744,11 +744,12 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error,

ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only"); /* - * Make sure updated value of ->s_mount_flags will be visible before - * ->s_flags update + * EXT4_FLAGS_SHUTDOWN was set which stops all filesystem + * modifications. We don't set SB_RDONLY because that requires + * sb->s_umount semaphore and setting it without proper remount + * procedure is confusing code such as freeze_super() leading to + * deadlocks and other problems. */ - smp_wmb(); - sb->s_flags |= SB_RDONLY; }

static void update_super_work(struct work_struct *work)

From: Pankaj Raghav p.raghav@samsung.com

[ Upstream commit 10553a91652d995274da63fc317470f703765081 ]

iomap_dio_zero() will pad a fs block with zeroes if the direct IO size < fs block size. iomap_dio_zero() has an implicit assumption that fs block size < page_size. This is true for most filesystems at the moment.

If the block size > page size, this will send the contents of the page next to zero page(as len > PAGE_SIZE) to the underlying block device, causing FS corruption.

iomap is a generic infrastructure and it should not make any assumptions about the fs block size and the page size of the system.

Signed-off-by: Pankaj Raghav p.raghav@samsung.com Link: https://lore.kernel.org/r/20240822135018.1931258-7-kernel@pankajraghav.com Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Darrick J. Wong djwong@kernel.org Reviewed-by: Dave Chinner dchinner@redhat.com Reviewed-by: Daniel Gomez da.gomez@samsung.com Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/iomap/buffered-io.c | 4 ++-- fs/iomap/direct-io.c | 45 ++++++++++++++++++++++++++++++++++++------ 2 files changed, 41 insertions(+), 8 deletions(-)

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c index 975fd88c1f0f4..6b89b5589ba28 100644 --- a/fs/iomap/buffered-io.c +++ b/fs/iomap/buffered-io.c @@ -1998,10 +1998,10 @@ iomap_writepages(struct address_space *mapping, struct writeback_control *wbc, } EXPORT_SYMBOL_GPL(iomap_writepages);

-static int __init iomap_init(void) +static int __init iomap_buffered_init(void) { return bioset_init(&iomap_ioend_bioset, 4 * (PAGE_SIZE / SECTOR_SIZE), offsetof(struct iomap_ioend, io_inline_bio), BIOSET_NEED_BVECS); } -fs_initcall(iomap_init); +fs_initcall(iomap_buffered_init); diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c index bcd3f8cf5ea42..409a21144a555 100644 --- a/fs/iomap/direct-io.c +++ b/fs/iomap/direct-io.c @@ -11,6 +11,7 @@ #include <linux/iomap.h> #include <linux/backing-dev.h> #include <linux/uio.h> +#include <linux/set_memory.h> #include <linux/task_io_accounting_ops.h> #include "trace.h"

@@ -27,6 +28,13 @@ #define IOMAP_DIO_WRITE (1U << 30) #define IOMAP_DIO_DIRTY (1U << 31)

+/* + * Used for sub block zeroing in iomap_dio_zero() + */ +#define IOMAP_ZERO_PAGE_SIZE (SZ_64K) +#define IOMAP_ZERO_PAGE_ORDER (get_order(IOMAP_ZERO_PAGE_SIZE)) +static struct page *zero_page; + struct iomap_dio { struct kiocb *iocb; const struct iomap_dio_ops *dops; @@ -232,13 +240,20 @@ void iomap_dio_bio_end_io(struct bio *bio) } EXPORT_SYMBOL_GPL(iomap_dio_bio_end_io);

-static void iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio, +static int iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio, loff_t pos, unsigned len) { struct inode *inode = file_inode(dio->iocb->ki_filp); - struct page *page = ZERO_PAGE(0); struct bio *bio;

+ if (!len) + return 0; + /* + * Max block size supported is 64k + */ + if (WARN_ON_ONCE(len > IOMAP_ZERO_PAGE_SIZE)) + return -EINVAL; + bio = iomap_dio_alloc_bio(iter, dio, 1, REQ_OP_WRITE | REQ_SYNC | REQ_IDLE); fscrypt_set_bio_crypt_ctx(bio, inode, pos >> inode->i_blkbits, GFP_KERNEL); @@ -246,8 +261,9 @@ static void iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio, bio->bi_private = dio; bio->bi_end_io = iomap_dio_bio_end_io;

- __bio_add_page(bio, page, len, 0); + __bio_add_page(bio, zero_page, len, 0); iomap_dio_submit_bio(iter, dio, bio, pos); + return 0; }

/* @@ -356,8 +372,10 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter, if (need_zeroout) { /* zero out from the start of the block to the write offset */ pad = pos & (fs_block_size - 1); - if (pad) - iomap_dio_zero(iter, dio, pos - pad, pad); + + ret = iomap_dio_zero(iter, dio, pos - pad, pad); + if (ret) + goto out; }

/* @@ -430,7 +448,8 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter, /* zero out from the end of the write to the end of the block */ pad = pos & (fs_block_size - 1); if (pad) - iomap_dio_zero(iter, dio, pos, fs_block_size - pad); + ret = iomap_dio_zero(iter, dio, pos, + fs_block_size - pad); } out: /* Undo iter limitation to current extent */ @@ -752,3 +771,17 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, return iomap_dio_complete(dio); } EXPORT_SYMBOL_GPL(iomap_dio_rw); + +static int __init iomap_dio_init(void) +{ + zero_page = alloc_pages(GFP_KERNEL | __GFP_ZERO, + IOMAP_ZERO_PAGE_ORDER); + + if (!zero_page) + return -ENOMEM; + + set_memory_ro((unsigned long)page_address(zero_page), + 1U << IOMAP_ZERO_PAGE_ORDER); + return 0; +} +fs_initcall(iomap_dio_init);

From: Baokun Li libaokun1@huawei.com

[ Upstream commit 4e2524ba2ca5f54bdbb9e5153bea00421ef653f5 ]

In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows:

ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!!

Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way.

Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly.

This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality.

Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Ojaswin Mujoo ojaswin@linux.ibm.com Tested-by: Ojaswin Mujoo ojaswin@linux.ibm.com Link: https://patch.msgid.link/20240822023545.1994557-5-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/extents.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 448e0ea49b31d..7fead53255fcb 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3287,7 +3287,7 @@ static int ext4_split_extent_at(handle_t *handle, }

/* - * ext4_split_extents() splits an extent and mark extent which is covered + * ext4_split_extent() splits an extent and mark extent which is covered * by @map as split_flags indicates * * It may result in splitting the extent into multiple extents (up to three) @@ -3363,7 +3363,7 @@ static int ext4_split_extent(handle_t *handle, goto out; }

- ext4_ext_show_leaf(inode, path); + ext4_ext_show_leaf(inode, *ppath); out: return err ? err : allocated; } @@ -3828,14 +3828,13 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode, struct ext4_ext_path **ppath, int flags, unsigned int allocated, ext4_fsblk_t newblock) { - struct ext4_ext_path __maybe_unused *path = *ppath; int ret = 0; int err = 0;

ext_debug(inode, "logical block %llu, max_blocks %u, flags 0x%x, allocated %u\n", (unsigned long long)map->m_lblk, map->m_len, flags, allocated); - ext4_ext_show_leaf(inode, path); + ext4_ext_show_leaf(inode, *ppath);

/* * When writing into unwritten space, we should not fail to @@ -3932,7 +3931,7 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode, if (allocated > map->m_len) allocated = map->m_len; map->m_len = allocated; - ext4_ext_show_leaf(inode, path); + ext4_ext_show_leaf(inode, *ppath); out2: return err ? err : allocated; }

From: Kuan-Wei Chiu visitorckw@gmail.com

[ Upstream commit 4cdc0e4ce5e893bc92255f5f734d983012f2bc2e ]

Replace shifts of '1' with '1U' in bitwise operations within __show_dev_tc_bpf() to prevent undefined behavior caused by shifting into the sign bit of a signed integer. By using '1U', the operations are explicitly performed on unsigned integers, avoiding potential integer overflow or sign-related issues.

Signed-off-by: Kuan-Wei Chiu visitorckw@gmail.com Signed-off-by: Andrii Nakryiko andrii@kernel.org Acked-by: Quentin Monnet qmo@kernel.org Link: https://lore.kernel.org/bpf/20240908140009.3149781-1-visitorckw@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/bpftool/net.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c index 66a8ce8ae0127..fd54ff436493f 100644 --- a/tools/bpf/bpftool/net.c +++ b/tools/bpf/bpftool/net.c @@ -480,9 +480,9 @@ static void __show_dev_tc_bpf(const struct ip_devname_ifindex *dev, if (prog_flags[i] || json_output) { NET_START_ARRAY("prog_flags", "%s "); for (j = 0; prog_flags[i] && j < 32; j++) { - if (!(prog_flags[i] & (1 << j))) + if (!(prog_flags[i] & (1U << j))) continue; - NET_DUMP_UINT_ONLY(1 << j); + NET_DUMP_UINT_ONLY(1U << j); } NET_END_ARRAY(""); } @@ -491,9 +491,9 @@ static void __show_dev_tc_bpf(const struct ip_devname_ifindex *dev, if (link_flags[i] || json_output) { NET_START_ARRAY("link_flags", "%s "); for (j = 0; link_flags[i] && j < 32; j++) { - if (!(link_flags[i] & (1 << j))) + if (!(link_flags[i] & (1U << j))) continue; - NET_DUMP_UINT_ONLY(1 << j); + NET_DUMP_UINT_ONLY(1U << j); } NET_END_ARRAY(""); }

From: Kuan-Wei Chiu visitorckw@gmail.com

[ Upstream commit f04e2ad394e2755d0bb2d858ecb5598718bf00d5 ]

When netfilter has no entry to display, qsort is called with qsort(NULL, 0, ...). This results in undefined behavior, as UBSan reports:

net.c:827:2: runtime error: null pointer passed as argument 1, which is declared to never be null

Although the C standard does not explicitly state whether calling qsort with a NULL pointer when the size is 0 constitutes undefined behavior, Section 7.1.4 of the C standard (Use of library functions) mentions:

"Each of the following statements applies unless explicitly stated otherwise in the detailed descriptions that follow: If an argument to a function has an invalid value (such as a value outside the domain of the function, or a pointer outside the address space of the program, or a null pointer, or a pointer to non-modifiable storage when the corresponding parameter is not const-qualified) or a type (after promotion) not expected by a function with variable number of arguments, the behavior is undefined."

To avoid this, add an early return when nf_link_info is NULL to prevent calling qsort with a NULL pointer.

Signed-off-by: Kuan-Wei Chiu visitorckw@gmail.com Signed-off-by: Andrii Nakryiko andrii@kernel.org Reviewed-by: Quentin Monnet qmo@kernel.org Link: https://lore.kernel.org/bpf/20240910150207.3179306-1-visitorckw@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/bpftool/net.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c index fd54ff436493f..28e9417a5c2e3 100644 --- a/tools/bpf/bpftool/net.c +++ b/tools/bpf/bpftool/net.c @@ -819,6 +819,9 @@ static void show_link_netfilter(void) nf_link_count++; }

+ if (!nf_link_info) + return; + qsort(nf_link_info, nf_link_count, sizeof(*nf_link_info), netfilter_link_compar);

for (id = 0; id < nf_link_count; id++) {