XHCI_SG_TRB_CACHE_SIZE_QUIRK was introduced in XHCI to resolve XHC timeout while using SG buffers, which was seen Synopsys XHCs. The support for this isn't present in DWC3 layer, this series enables XHCI_SG_TRB_CACHE_SIZE_QUIRK since this is needed for DWC3 controller.
Prashanth K (2): usb: dwc3: core: Add support for xhci-sg-trb-cache-size-quirk dt-bindings: usb: snps,dwc3: Add 'xhci-sg-trb-cache-size-quirk'
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 7 +++++++ drivers/usb/dwc3/core.c | 2 ++ drivers/usb/dwc3/core.h | 3 +++ drivers/usb/dwc3/host.c | 9 +++++++++ 4 files changed, 21 insertions(+)
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout while using SG buffers. Add a new quirk in DWC3 layer to enable this XHCI quirk since this is needed for DWC3 controller. Added xhci private data structure to pass the quirk to XHCI.
In Synopsys DWC3 databook, Table 9-3: xHCI Debug Capability Limitations Chained TRBs greater than TRB cache size: The debug capability driver must not create a multi-TRB TD that describes smaller than a 1K packet that spreads across 8 or more TRBs on either the IN TR or the OUT TR
Cc: stable@vger.kernel.org # 5.11 Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") Signed-off-by: Prashanth K quic_prashk@quicinc.com --- drivers/usb/dwc3/core.c | 2 ++ drivers/usb/dwc3/core.h | 3 +++ drivers/usb/dwc3/host.c | 9 +++++++++ 3 files changed, 14 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0328c86..c6b0ae9 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1633,6 +1633,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,parkmode-disable-hs-quirk"); dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev, "snps,gfladj-refclk-lpm-sel-quirk"); + dwc->xhci_sg_trb_cache_size_quirk = device_property_read_bool(dev, + "xhci-sg-trb-cache-size-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index efe6caf..dde1447 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1119,6 +1119,8 @@ struct dwc3_scratchpad_array { * instances in park mode. * @gfladj_refclk_lpm_sel: set if we need to enable SOF/ITP counter * running based on ref_clk + * @xhci_sg_trb_cache_size_quirk: set to prevent XHC timeout when scatter-gather + * is enabled due to TRB_CACHE_SIZE. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1342,6 +1344,7 @@ struct dwc3 { unsigned parkmode_disable_ss_quirk:1; unsigned parkmode_disable_hs_quirk:1; unsigned gfladj_refclk_lpm_sel:1; + unsigned xhci_sg_trb_cache_size_quirk:1;
unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 61f57fe..09f049b 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -63,6 +63,7 @@ int dwc3_host_init(struct dwc3 *dwc) { struct property_entry props[4]; struct platform_device *xhci; + struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; int ret, irq; int prop_idx = 0;
@@ -87,6 +88,14 @@ int dwc3_host_init(struct dwc3 *dwc) goto err; }
+ if (dwc->xhci_sg_trb_cache_size_quirk) + dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK; + + ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv, + sizeof(dwc3_xhci_plat_priv)); + if (ret) + goto err; + memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
if (dwc->usb3_lpm_capable)
Hi Prashanth,
kernel test robot noticed the following build warnings:
[auto build test WARNING on usb/usb-testing] [also build test WARNING on usb/usb-next usb/usb-linus linus/master v6.7-rc1 next-20231117] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prashanth-K/usb-dwc3-core-Add... base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing patch link: https://lore.kernel.org/r/20231118055455.249088-2-quic_prashk%40quicinc.com patch subject: [PATCH 1/2] usb: dwc3: core: Add support for xhci-sg-trb-cache-size-quirk config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20231118/202311181846.AjhQ7gvy-lkp@i...) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231118/202311181846.AjhQ7gvy-lkp@i...)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202311181846.AjhQ7gvy-lkp@intel.com/
All warnings (new ones prefixed by >>):
drivers/usb/dwc3/host.c: In function 'dwc3_host_init': drivers/usb/dwc3/host.c:66:16: error: variable 'dwc3_xhci_plat_priv' has initializer but incomplete type 66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^~~~~~~~~~~~~~
drivers/usb/dwc3/host.c:66:56: warning: excess elements in struct initializer
66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^ drivers/usb/dwc3/host.c:66:56: note: (near initialization for 'dwc3_xhci_plat_priv') drivers/usb/dwc3/host.c:66:33: error: storage size of 'dwc3_xhci_plat_priv' isn't known 66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^~~~~~~~~~~~~~~~~~~ drivers/usb/dwc3/host.c:92:47: error: 'XHCI_SG_TRB_CACHE_SIZE_QUIRK' undeclared (first use in this function) 92 | dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/usb/dwc3/host.c:92:47: note: each undeclared identifier is reported only once for each function it appears in
drivers/usb/dwc3/host.c:66:33: warning: unused variable 'dwc3_xhci_plat_priv' [-Wunused-variable]
66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^~~~~~~~~~~~~~~~~~~
vim +66 drivers/usb/dwc3/host.c
61 62 int dwc3_host_init(struct dwc3 *dwc) 63 { 64 struct property_entry props[4]; 65 struct platform_device *xhci;
66 struct xhci_plat_priv dwc3_xhci_plat_priv = {0};
67 int ret, irq; 68 int prop_idx = 0; 69 70 irq = dwc3_host_get_irq(dwc); 71 if (irq < 0) 72 return irq; 73 74 xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); 75 if (!xhci) { 76 dev_err(dwc->dev, "couldn't allocate xHCI device\n"); 77 return -ENOMEM; 78 } 79 80 xhci->dev.parent = dwc->dev; 81 82 dwc->xhci = xhci; 83 84 ret = platform_device_add_resources(xhci, dwc->xhci_resources, 85 DWC3_XHCI_RESOURCES_NUM); 86 if (ret) { 87 dev_err(dwc->dev, "couldn't add resources to xHCI device\n"); 88 goto err; 89 } 90 91 if (dwc->xhci_sg_trb_cache_size_quirk) 92 dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK; 93 94 ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv, 95 sizeof(dwc3_xhci_plat_priv)); 96 if (ret) 97 goto err; 98 99 memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); 100 101 if (dwc->usb3_lpm_capable) 102 props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb3-lpm-capable"); 103 104 if (dwc->usb2_lpm_disable) 105 props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb2-lpm-disable"); 106 107 /** 108 * WORKAROUND: dwc3 revisions <=3.00a have a limitation 109 * where Port Disable command doesn't work. 110 * 111 * The suggested workaround is that we avoid Port Disable 112 * completely. 113 * 114 * This following flag tells XHCI to do just that. 115 */ 116 if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A)) 117 props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped"); 118 119 if (prop_idx) { 120 ret = device_create_managed_software_node(&xhci->dev, props, NULL); 121 if (ret) { 122 dev_err(dwc->dev, "failed to add properties to xHCI\n"); 123 goto err; 124 } 125 } 126 127 ret = platform_device_add(xhci); 128 if (ret) { 129 dev_err(dwc->dev, "failed to register xHCI device\n"); 130 goto err; 131 } 132 133 return 0; 134 err: 135 platform_device_put(xhci); 136 return ret; 137 } 138
Hi Prashanth,
kernel test robot noticed the following build errors:
[auto build test ERROR on usb/usb-testing] [also build test ERROR on usb/usb-next usb/usb-linus linus/master v6.7-rc1 next-20231117] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prashanth-K/usb-dwc3-core-Add... base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing patch link: https://lore.kernel.org/r/20231118055455.249088-2-quic_prashk%40quicinc.com patch subject: [PATCH 1/2] usb: dwc3: core: Add support for xhci-sg-trb-cache-size-quirk config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20231118/202311182124.Rhvs60sb-lkp@i...) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231118/202311182124.Rhvs60sb-lkp@i...)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202311182124.Rhvs60sb-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/usb/dwc3/host.c: In function 'dwc3_host_init':
drivers/usb/dwc3/host.c:66:16: error: variable 'dwc3_xhci_plat_priv' has initializer but incomplete type
66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^~~~~~~~~~~~~~ drivers/usb/dwc3/host.c:66:56: warning: excess elements in struct initializer 66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^ drivers/usb/dwc3/host.c:66:56: note: (near initialization for 'dwc3_xhci_plat_priv')
drivers/usb/dwc3/host.c:66:33: error: storage size of 'dwc3_xhci_plat_priv' isn't known
66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^~~~~~~~~~~~~~~~~~~
drivers/usb/dwc3/host.c:92:47: error: 'XHCI_SG_TRB_CACHE_SIZE_QUIRK' undeclared (first use in this function)
92 | dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/usb/dwc3/host.c:92:47: note: each undeclared identifier is reported only once for each function it appears in drivers/usb/dwc3/host.c:66:33: warning: unused variable 'dwc3_xhci_plat_priv' [-Wunused-variable] 66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^~~~~~~~~~~~~~~~~~~
vim +/dwc3_xhci_plat_priv +66 drivers/usb/dwc3/host.c
61 62 int dwc3_host_init(struct dwc3 *dwc) 63 { 64 struct property_entry props[4]; 65 struct platform_device *xhci;
66 struct xhci_plat_priv dwc3_xhci_plat_priv = {0};
67 int ret, irq; 68 int prop_idx = 0; 69 70 irq = dwc3_host_get_irq(dwc); 71 if (irq < 0) 72 return irq; 73 74 xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); 75 if (!xhci) { 76 dev_err(dwc->dev, "couldn't allocate xHCI device\n"); 77 return -ENOMEM; 78 } 79 80 xhci->dev.parent = dwc->dev; 81 82 dwc->xhci = xhci; 83 84 ret = platform_device_add_resources(xhci, dwc->xhci_resources, 85 DWC3_XHCI_RESOURCES_NUM); 86 if (ret) { 87 dev_err(dwc->dev, "couldn't add resources to xHCI device\n"); 88 goto err; 89 } 90 91 if (dwc->xhci_sg_trb_cache_size_quirk)
92 dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
93 94 ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv, 95 sizeof(dwc3_xhci_plat_priv)); 96 if (ret) 97 goto err; 98 99 memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); 100 101 if (dwc->usb3_lpm_capable) 102 props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb3-lpm-capable"); 103 104 if (dwc->usb2_lpm_disable) 105 props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb2-lpm-disable"); 106 107 /** 108 * WORKAROUND: dwc3 revisions <=3.00a have a limitation 109 * where Port Disable command doesn't work. 110 * 111 * The suggested workaround is that we avoid Port Disable 112 * completely. 113 * 114 * This following flag tells XHCI to do just that. 115 */ 116 if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A)) 117 props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped"); 118 119 if (prop_idx) { 120 ret = device_create_managed_software_node(&xhci->dev, props, NULL); 121 if (ret) { 122 dev_err(dwc->dev, "failed to add properties to xHCI\n"); 123 goto err; 124 } 125 } 126 127 ret = platform_device_add(xhci); 128 if (ret) { 129 dev_err(dwc->dev, "failed to register xHCI device\n"); 130 goto err; 131 } 132 133 return 0; 134 err: 135 platform_device_put(xhci); 136 return ret; 137 } 138
Hi Prashanth,
kernel test robot noticed the following build errors:
[auto build test ERROR on usb/usb-testing] [also build test ERROR on usb/usb-next usb/usb-linus linus/master v6.7-rc1 next-20231117] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prashanth-K/usb-dwc3-core-Add... base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing patch link: https://lore.kernel.org/r/20231118055455.249088-2-quic_prashk%40quicinc.com patch subject: [PATCH 1/2] usb: dwc3: core: Add support for xhci-sg-trb-cache-size-quirk config: hexagon-randconfig-002-20231118 (https://download.01.org/0day-ci/archive/20231118/202311182312.lJrwZFwZ-lkp@i...) compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231118/202311182312.lJrwZFwZ-lkp@i...)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot lkp@intel.com | Closes: https://lore.kernel.org/oe-kbuild-all/202311182312.lJrwZFwZ-lkp@intel.com/
All errors (new ones prefixed by >>):
In file included from drivers/usb/dwc3/host.c:10: In file included from include/linux/irq.h:20: In file included from include/linux/io.h:13: In file included from arch/hexagon/include/asm/io.h:337: include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 547 | val = __raw_readb(PCI_IOBASE + addr); | ~~~~~~~~~~ ^ include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 560 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr)); | ~~~~~~~~~~ ^ include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu' 37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ In file included from drivers/usb/dwc3/host.c:10: In file included from include/linux/irq.h:20: In file included from include/linux/io.h:13: In file included from arch/hexagon/include/asm/io.h:337: include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 573 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr)); | ~~~~~~~~~~ ^ include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu' 35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) | ^ In file included from drivers/usb/dwc3/host.c:10: In file included from include/linux/irq.h:20: In file included from include/linux/io.h:13: In file included from arch/hexagon/include/asm/io.h:337: include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 584 | __raw_writeb(value, PCI_IOBASE + addr); | ~~~~~~~~~~ ^ include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 594 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr); | ~~~~~~~~~~ ^ include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 604 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr); | ~~~~~~~~~~ ^
drivers/usb/dwc3/host.c:66:26: error: variable has incomplete type 'struct xhci_plat_priv'
66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^ drivers/usb/dwc3/host.c:66:9: note: forward declaration of 'struct xhci_plat_priv' 66 | struct xhci_plat_priv dwc3_xhci_plat_priv = {0}; | ^
drivers/usb/dwc3/host.c:92:33: error: use of undeclared identifier 'XHCI_SG_TRB_CACHE_SIZE_QUIRK'
92 | dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK; | ^ 6 warnings and 2 errors generated.
vim +66 drivers/usb/dwc3/host.c
61 62 int dwc3_host_init(struct dwc3 *dwc) 63 { 64 struct property_entry props[4]; 65 struct platform_device *xhci;
66 struct xhci_plat_priv dwc3_xhci_plat_priv = {0};
67 int ret, irq; 68 int prop_idx = 0; 69 70 irq = dwc3_host_get_irq(dwc); 71 if (irq < 0) 72 return irq; 73 74 xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); 75 if (!xhci) { 76 dev_err(dwc->dev, "couldn't allocate xHCI device\n"); 77 return -ENOMEM; 78 } 79 80 xhci->dev.parent = dwc->dev; 81 82 dwc->xhci = xhci; 83 84 ret = platform_device_add_resources(xhci, dwc->xhci_resources, 85 DWC3_XHCI_RESOURCES_NUM); 86 if (ret) { 87 dev_err(dwc->dev, "couldn't add resources to xHCI device\n"); 88 goto err; 89 } 90 91 if (dwc->xhci_sg_trb_cache_size_quirk)
92 dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
93 94 ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv, 95 sizeof(dwc3_xhci_plat_priv)); 96 if (ret) 97 goto err; 98 99 memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); 100 101 if (dwc->usb3_lpm_capable) 102 props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb3-lpm-capable"); 103 104 if (dwc->usb2_lpm_disable) 105 props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb2-lpm-disable"); 106 107 /** 108 * WORKAROUND: dwc3 revisions <=3.00a have a limitation 109 * where Port Disable command doesn't work. 110 * 111 * The suggested workaround is that we avoid Port Disable 112 * completely. 113 * 114 * This following flag tells XHCI to do just that. 115 */ 116 if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A)) 117 props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped"); 118 119 if (prop_idx) { 120 ret = device_create_managed_software_node(&xhci->dev, props, NULL); 121 if (ret) { 122 dev_err(dwc->dev, "failed to add properties to xHCI\n"); 123 goto err; 124 } 125 } 126 127 ret = platform_device_add(xhci); 128 if (ret) { 129 dev_err(dwc->dev, "failed to register xHCI device\n"); 130 goto err; 131 } 132 133 return 0; 134 err: 135 platform_device_put(xhci); 136 return ret; 137 } 138
Add a new 'xhci-sg-trb-cache-size-quirk' DT quirk to dwc3 core for preventing xhci hang issue while using SG buffers.
Signed-off-by: Prashanth K quic_prashk@quicinc.com --- Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index ee5af4b..768fdb5 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -459,6 +459,13 @@ properties: description: Enable USB remote wakeup.
+ xhci-sg-trb-cache-size-quirk: + description: + When set, fixes the SNPS xHC hang issue when the data is scattered across + small buffers which does not make at least MPS size for given controller + TRB cache size. + type: boolean + unevaluatedProperties: false
required:
Hi,
Thanks for your patch.
FYI: kernel test robot notices the stable kernel rule is not satisfied.
The check is based on https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html#opti...
Rule: add the tag "Cc: stable@vger.kernel.org" in the sign-off area to have the patch automatically included in the stable tree. Subject: [PATCH 2/2] dt-bindings: usb: snps,dwc3: Add 'xhci-sg-trb-cache-size-quirk' Link: https://lore.kernel.org/stable/20231118055455.249088-3-quic_prashk%40quicinc...
linux-stable-mirror@lists.linaro.org
-
kernel test robot -
Prashanth K