From: Shay Drory shayd@nvidia.com

commit 38b50aa44495d5eb4218f0b82fc2da76505cec53 upstream.

Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0), there is a special handling in order to use the correct counters, but, port_num is being passed down the stack without any change. Also, some functions assume that port_num >=1. As a result, the following oops can occur.

BUG: unable to handle page fault for address: ffff89510294f1a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock+0xc/0x20 Call Trace: <TASK> mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib] do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib] mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib] ib_setup_device_attrs+0xf0/0x290 [ib_core] ib_register_device+0x3bb/0x510 [ib_core] ? atomic_notifier_chain_register+0x67/0x80 __mlx5_ib_add+0x2b/0x80 [mlx5_ib] mlx5r_probe+0xb8/0x150 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x3c/0x70 ? driver_sysfs_add+0x6b/0x90 really_probe+0xcd/0x380 __driver_probe_device+0x80/0x170 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 ? driver_allows_async_probing+0x60/0x60 ? driver_allows_async_probing+0x60/0x60 bus_for_each_drv+0x7b/0xc0 __device_attach+0xbc/0x200 bus_probe_device+0x87/0xa0 device_add+0x404/0x940 ? dev_set_name+0x53/0x70 __auxiliary_device_add+0x43/0x60 add_adev+0x99/0xe0 [mlx5_core] mlx5_attach_device+0xc8/0x120 [mlx5_core] mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core] devlink_reload+0x133/0x250 devlink_nl_cmd_reload+0x480/0x570 ? devlink_nl_pre_doit+0x44/0x2b0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x180/0x2b0 ? devlink_nl_cmd_region_read_dumpit+0x540/0x540 ? devlink_reload+0x250/0x250 ? devlink_put+0x50/0x50 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x237/0x490 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? handle_mm_fault+0x10e/0x290 ? do_user_addr_fault+0x1c0/0x5f0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fix it by setting port_num to 1 in order to get device status and remove unused variable.

Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE") Link: https://lore.kernel.org/r/98b82994c3cd3fa593b8a75ed3f3901e208beb0f.167223173... Signed-off-by: Shay Drory shayd@nvidia.com Reviewed-by: Patrisious Haddad phaddad@nvidia.com Signed-off-by: Leon Romanovsky leon@kernel.org [ kovalev: bp to fix CVE-2023-53393 ] Signed-off-by: Vasiliy Kovalev kovalev@altlinux.org --- drivers/infiniband/hw/mlx5/counters.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/counters.c b/drivers/infiniband/hw/mlx5/counters.c index 33636268d43d..29b38cf055be 100644 --- a/drivers/infiniband/hw/mlx5/counters.c +++ b/drivers/infiniband/hw/mlx5/counters.c @@ -249,7 +249,6 @@ static int mlx5_ib_get_hw_stats(struct ib_device *ibdev, const struct mlx5_ib_counters *cnts = get_counters(dev, port_num - 1); struct mlx5_core_dev *mdev; int ret, num_counters; - u8 mdev_port_num;

if (!stats) return -EINVAL; @@ -270,8 +269,9 @@ static int mlx5_ib_get_hw_stats(struct ib_device *ibdev, }

if (MLX5_CAP_GEN(dev->mdev, cc_query_allowed)) { - mdev = mlx5_ib_get_native_port_mdev(dev, port_num, - &mdev_port_num); + if (!port_num) + port_num = 1; + mdev = mlx5_ib_get_native_port_mdev(dev, port_num, NULL); if (!mdev) { /* If port is not affiliated yet, its in down state * which doesn't have any counters yet, so it would be