From: Sai Krishna Potthuri lakshmi.sai.krishna.potthuri@xilinx.com
[ Upstream commit 21b511ddee09a78909035ec47a6a594349fe3296 ]
As part of unprepare_transfer_hardware, SPI controller will be disabled which will indirectly deassert the CS line. This will create a problem in some of the devices where message will be transferred with cs_change flag set(CS should not be deasserted). As per SPI controller implementation, if SPI controller is disabled then all output enables are inactive and all pins are set to input mode which means CS will go to default state high(deassert). This leads to an issue when core explicitly ask not to deassert the CS (cs_change = 1). This patch fix the above issue by checking the Slave select status bits from configuration register before disabling the SPI.
Signed-off-by: Sai Krishna Potthuri lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Amit Kumar Mahapatra amit.kumar-mahapatra@xilinx.com Link: https://lore.kernel.org/r/20220606062525.18447-1-amit.kumar-mahapatra@xilinx... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index ceb16e70d235..90b18c32f859 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -69,6 +69,7 @@ #define CDNS_SPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */ #define CDNS_SPI_SS_SHIFT 10 /* Slave Select field shift in CR */ #define CDNS_SPI_SS0 0x1 /* Slave Select zero */ +#define CDNS_SPI_NOSS 0x3C /* No Slave select */
/* * SPI Interrupt Registers bit Masks @@ -449,15 +450,20 @@ static int cdns_prepare_transfer_hardware(struct spi_master *master) * @master: Pointer to the spi_master structure which provides * information about the controller. * - * This function disables the SPI master controller. + * This function disables the SPI master controller when no slave selected. * * Return: 0 always */ static int cdns_unprepare_transfer_hardware(struct spi_master *master) { struct cdns_spi *xspi = spi_master_get_devdata(master); + u32 ctrl_reg;
- cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE); + /* Disable the SPI if slave is deselected */ + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR); + ctrl_reg = (ctrl_reg & CDNS_SPI_CR_SSCTRL) >> CDNS_SPI_SS_SHIFT; + if (ctrl_reg == CDNS_SPI_NOSS) + cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
return 0; }
From: Lars-Peter Clausen lars@metafoo.de
[ Upstream commit 7b40322f7183a92c4303457528ae7cda571c60b9 ]
The depth of the transmit FIFO for the Cadence SPI controller is currently hardcoded to 128. But the depth is a synthesis configuration parameter of the core and can vary between different SoCs.
If the configured FIFO size is less than 128 the driver will busy loop in the cdns_spi_fill_tx_fifo() function waiting for FIFO space to become available.
Depending on the length and speed of the transfer it can spin for a significant amount of time. The cdns_spi_fill_tx_fifo() function is called from the drivers interrupt handler, so it can leave interrupts disabled for a prolonged amount of time.
In addition the read FIFO will also overflow and data will be discarded.
To avoid this detect the actual size of the FIFO and use that rather than the hardcoded value.
To detect the FIFO size the FIFO threshold register is used. The register is sized so that it can hold FIFO size - 1 as its maximum value. Bits that are not needed to hold the threshold value will always read 0. By writing 0xffff to the register and then reading back the value in the register we get the FIFO size.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de Link: https://lore.kernel.org/r/20220527091143.3780378-1-lars@metafoo.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 90b18c32f859..32117722ae8d 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -93,9 +93,6 @@ #define CDNS_SPI_ER_ENABLE 0x00000001 /* SPI Enable Bit Mask */ #define CDNS_SPI_ER_DISABLE 0x0 /* SPI Disable Bit Mask */
-/* SPI FIFO depth in bytes */ -#define CDNS_SPI_FIFO_DEPTH 128 - /* Default number of chip select lines */ #define CDNS_SPI_DEFAULT_NUM_CS 4
@@ -111,6 +108,7 @@ * @rx_bytes: Number of bytes requested * @dev_busy: Device busy flag * @is_decoded_cs: Flag for decoder property set or not + * @tx_fifo_depth: Depth of the TX FIFO */ struct cdns_spi { void __iomem *regs; @@ -124,6 +122,7 @@ struct cdns_spi { int rx_bytes; u8 dev_busy; u32 is_decoded_cs; + unsigned int tx_fifo_depth; };
/* Macros for the SPI controller read/write */ @@ -305,7 +304,7 @@ static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi) { unsigned long trans_cnt = 0;
- while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) && + while ((trans_cnt < xspi->tx_fifo_depth) && (xspi->tx_bytes > 0)) {
/* When xspi in busy condition, bytes may send failed, @@ -468,6 +467,24 @@ static int cdns_unprepare_transfer_hardware(struct spi_master *master) return 0; }
+/** + * cdns_spi_detect_fifo_depth - Detect the FIFO depth of the hardware + * @xspi: Pointer to the cdns_spi structure + * + * The depth of the TX FIFO is a synthesis configuration parameter of the SPI + * IP. The FIFO threshold register is sized so that its maximum value can be the + * FIFO size - 1. This is used to detect the size of the FIFO. + */ +static void cdns_spi_detect_fifo_depth(struct cdns_spi *xspi) +{ + /* The MSBs will get truncated giving us the size of the FIFO */ + cdns_spi_write(xspi, CDNS_SPI_THLD, 0xffff); + xspi->tx_fifo_depth = cdns_spi_read(xspi, CDNS_SPI_THLD) + 1; + + /* Reset to default */ + cdns_spi_write(xspi, CDNS_SPI_THLD, 0x1); +} + /** * cdns_spi_probe - Probe method for the SPI driver * @pdev: Pointer to the platform_device structure @@ -540,6 +557,8 @@ static int cdns_spi_probe(struct platform_device *pdev) if (ret < 0) xspi->is_decoded_cs = 0;
+ cdns_spi_detect_fifo_depth(xspi); + /* SPI controller initializations */ cdns_spi_init_hw(xspi);
From: Robert Marko robimarko@gmail.com
[ Upstream commit 122e951eb8045338089b086c8bd9b0b9afb04a92 ]
Currently set MP5496 Buck and LDO ranges dont match its datasheet[1]. According to the datasheet: Buck range is 0.6-2.1875V with a 12.5mV step LDO range is 0.8-3.975V with a 25mV step.
So, correct the ranges according to the datasheet[1].
[1] https://www.monolithicpower.com/en/documentview/productdocument/index/versio...
Signed-off-by: Robert Marko robimarko@gmail.com Link: https://lore.kernel.org/r/20220604193300.125758-2-robimarko@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/qcom_smd-regulator.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 05d227f9d2f2..94c40d6e8930 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -679,19 +679,19 @@ static const struct regulator_desc pms405_pldo600 = {
static const struct regulator_desc mp5496_smpa2 = { .linear_ranges = (struct linear_range[]) { - REGULATOR_LINEAR_RANGE(725000, 0, 27, 12500), + REGULATOR_LINEAR_RANGE(600000, 0, 127, 12500), }, .n_linear_ranges = 1, - .n_voltages = 28, + .n_voltages = 128, .ops = &rpm_mp5496_ops, };
static const struct regulator_desc mp5496_ldoa2 = { .linear_ranges = (struct linear_range[]) { - REGULATOR_LINEAR_RANGE(1800000, 0, 60, 25000), + REGULATOR_LINEAR_RANGE(800000, 0, 127, 25000), }, .n_linear_ranges = 1, - .n_voltages = 61, + .n_voltages = 128, .ops = &rpm_mp5496_ops, };
From: Daniil Dementev d.dementev@ispras.ru
[ Upstream commit 3ddbe35d9a2ebd4924d458e0246b4ba6c13bb456 ]
Buffer overflow could occur in the loop "while", due to accessing an array element before checking the index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Daniil Dementev d.dementev@ispras.ru Reviewed-by: Alexey Khoroshilov khoroshilov@ispras.ru Link: https://lore.kernel.org/r/20220610165732.2904-1-d.dementev@ispras.ru Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer_us16x08.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index bd63a9ce6a70..71f6186edcdd 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -637,10 +637,10 @@ static int snd_get_meter_comp_index(struct snd_us16x08_meter_store *store) } } else { /* skip channels with no compressor active */ - while (!store->comp_store->val[ + while (store->comp_index <= SND_US16X08_MAX_CHANNELS + && !store->comp_store->val[ COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)] - [store->comp_index - 1] - && store->comp_index <= SND_US16X08_MAX_CHANNELS) { + [store->comp_index - 1]) { store->comp_index++; } ret = store->comp_index++;
From: Serge Semin Sergey.Semin@baikalelectronics.ru
[ Upstream commit be5cddef05f519a321a543906f255ac247246074 ]
The Baikal-T1 APB bus driver correctly handles the deferred probe situation, but still pollutes the system log with a misleading error message. Let's fix that by using the dev_err_probe() method to print the log message in case of the clocks/resets request errors.
Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Link: https://lore.kernel.org/r/20220610104030.28399-1-Sergey.Semin@baikalelectron...' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/bt1-apb.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/bus/bt1-apb.c b/drivers/bus/bt1-apb.c index b25ff941e7c7..63b1b4a76671 100644 --- a/drivers/bus/bt1-apb.c +++ b/drivers/bus/bt1-apb.c @@ -175,10 +175,9 @@ static int bt1_apb_request_rst(struct bt1_apb *apb) int ret;
apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst"); - if (IS_ERR(apb->prst)) { - dev_warn(apb->dev, "Couldn't get reset control line\n"); - return PTR_ERR(apb->prst); - } + if (IS_ERR(apb->prst)) + return dev_err_probe(apb->dev, PTR_ERR(apb->prst), + "Couldn't get reset control line\n");
ret = reset_control_deassert(apb->prst); if (ret) @@ -199,10 +198,9 @@ static int bt1_apb_request_clk(struct bt1_apb *apb) int ret;
apb->pclk = devm_clk_get(apb->dev, "pclk"); - if (IS_ERR(apb->pclk)) { - dev_err(apb->dev, "Couldn't get APB clock descriptor\n"); - return PTR_ERR(apb->pclk); - } + if (IS_ERR(apb->pclk)) + return dev_err_probe(apb->dev, PTR_ERR(apb->pclk), + "Couldn't get APB clock descriptor\n");
ret = clk_prepare_enable(apb->pclk); if (ret) {
From: Serge Semin Sergey.Semin@baikalelectronics.ru
[ Upstream commit 5e93207e962a6d23893ff4405f6c5d4396fb5934 ]
The Baikal-T1 AXI bus driver correctly handles the deferred probe situation, but still pollutes the system log with a misleading error message. Let's fix that by using the dev_err_probe() method to print the log message in case of the clocks/resets request errors.
Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Link: https://lore.kernel.org/r/20220610104030.28399-2-Sergey.Semin@baikalelectron...' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/bt1-axi.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/bus/bt1-axi.c b/drivers/bus/bt1-axi.c index e7a6744acc7b..70e49a6e5374 100644 --- a/drivers/bus/bt1-axi.c +++ b/drivers/bus/bt1-axi.c @@ -135,10 +135,9 @@ static int bt1_axi_request_rst(struct bt1_axi *axi) int ret;
axi->arst = devm_reset_control_get_optional_exclusive(axi->dev, "arst"); - if (IS_ERR(axi->arst)) { - dev_warn(axi->dev, "Couldn't get reset control line\n"); - return PTR_ERR(axi->arst); - } + if (IS_ERR(axi->arst)) + return dev_err_probe(axi->dev, PTR_ERR(axi->arst), + "Couldn't get reset control line\n");
ret = reset_control_deassert(axi->arst); if (ret) @@ -159,10 +158,9 @@ static int bt1_axi_request_clk(struct bt1_axi *axi) int ret;
axi->aclk = devm_clk_get(axi->dev, "aclk"); - if (IS_ERR(axi->aclk)) { - dev_err(axi->dev, "Couldn't get AXI Interconnect clock\n"); - return PTR_ERR(axi->aclk); - } + if (IS_ERR(axi->aclk)) + return dev_err_probe(axi->dev, PTR_ERR(axi->aclk), + "Couldn't get AXI Interconnect clock\n");
ret = clk_prepare_enable(axi->aclk); if (ret) {
From: Maxime Ripard maxime@cerno.tech
[ Upstream commit 2523e9dcc3be91bf9fdc0d1e542557ca00bbef42 ]
We'll need to extend the vc4_async_flip_state structure to rely on another callback implementation, so let's move the current one into a union.
Reviewed-by: Melissa Wen mwen@igalia.com Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/20220610115149.964394-10-maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/vc4/vc4_crtc.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index f4ccca922e44..c0332b69d22c 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -694,17 +694,17 @@ struct vc4_async_flip_state { struct drm_framebuffer *old_fb; struct drm_pending_vblank_event *event;
- struct vc4_seqno_cb cb; + union { + struct vc4_seqno_cb seqno; + } cb; };
/* Called when the V3D execution for the BO being flipped to is done, so that * we can actually update the plane's address to point to it. */ static void -vc4_async_page_flip_complete(struct vc4_seqno_cb *cb) +vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state) { - struct vc4_async_flip_state *flip_state = - container_of(cb, struct vc4_async_flip_state, cb); struct drm_crtc *crtc = flip_state->crtc; struct drm_device *dev = crtc->dev; struct vc4_dev *vc4 = to_vc4_dev(dev); @@ -743,6 +743,14 @@ vc4_async_page_flip_complete(struct vc4_seqno_cb *cb) up(&vc4->async_modeset); }
+static void vc4_async_page_flip_seqno_complete(struct vc4_seqno_cb *cb) +{ + struct vc4_async_flip_state *flip_state = + container_of(cb, struct vc4_async_flip_state, cb.seqno); + + vc4_async_page_flip_complete(flip_state); +} + /* Implements async (non-vblank-synced) page flips. * * The page flip ioctl needs to return immediately, so we grab the @@ -813,8 +821,8 @@ static int vc4_async_page_flip(struct drm_crtc *crtc, */ drm_atomic_set_fb_for_plane(plane->state, fb);
- vc4_queue_seqno_cb(dev, &flip_state->cb, bo->seqno, - vc4_async_page_flip_complete); + vc4_queue_seqno_cb(dev, &flip_state->cb.seqno, bo->seqno, + vc4_async_page_flip_seqno_complete);
/* Driver takes ownership of state on successful async commit. */ return 0;
From: Maxime Ripard maxime@cerno.tech
[ Upstream commit 4d12c36fb73b5c49fe2f95d06515fd9846010fd2 ]
We'll soon introduce another completion callback source that won't need to use the BO reference counting, so let's move it around to create a function we will be able to share between both callbacks.
Reviewed-by: Melissa Wen mwen@igalia.com Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/20220610115149.964394-11-maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/vc4/vc4_crtc.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index c0332b69d22c..94bc20247ef9 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -722,21 +722,8 @@ vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state) drm_crtc_vblank_put(crtc); drm_framebuffer_put(flip_state->fb);
- /* Decrement the BO usecnt in order to keep the inc/dec calls balanced - * when the planes are updated through the async update path. - * FIXME: we should move to generic async-page-flip when it's - * available, so that we can get rid of this hand-made cleanup_fb() - * logic. - */ - if (flip_state->old_fb) { - struct drm_gem_cma_object *cma_bo; - struct vc4_bo *bo; - - cma_bo = drm_fb_cma_get_gem_obj(flip_state->old_fb, 0); - bo = to_vc4_bo(&cma_bo->base); - vc4_bo_dec_usecnt(bo); + if (flip_state->old_fb) drm_framebuffer_put(flip_state->old_fb); - }
kfree(flip_state);
@@ -747,8 +734,27 @@ static void vc4_async_page_flip_seqno_complete(struct vc4_seqno_cb *cb) { struct vc4_async_flip_state *flip_state = container_of(cb, struct vc4_async_flip_state, cb.seqno); + struct vc4_bo *bo = NULL; + + if (flip_state->old_fb) { + struct drm_gem_cma_object *cma_bo = + drm_fb_cma_get_gem_obj(flip_state->old_fb, 0); + bo = to_vc4_bo(&cma_bo->base); + }
vc4_async_page_flip_complete(flip_state); + + /* + * Decrement the BO usecnt in order to keep the inc/dec + * calls balanced when the planes are updated through + * the async update path. + * + * FIXME: we should move to generic async-page-flip when + * it's available, so that we can get rid of this + * hand-made cleanup_fb() logic. + */ + if (bo) + vc4_bo_dec_usecnt(bo); }
/* Implements async (non-vblank-synced) page flips.
From: Bart Van Assche bvanassche@acm.org
[ Upstream commit da8badd7d3583f447eac2ab65a332f2d773deca1 ]
Remove the local variable 'err'. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20220613214442.212466-2-bvanassche@acm.org Reviewed-by: Stanley Chu stanley.chu@mediatek.com Reviewed-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index ea6ceab1a1b2..1b32d4f4e21e 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -2649,7 +2649,6 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, static int ufshcd_clear_cmd(struct ufs_hba *hba, int tag) { - int err = 0; unsigned long flags; u32 mask = 1 << tag;
@@ -2662,11 +2661,8 @@ ufshcd_clear_cmd(struct ufs_hba *hba, int tag) * wait for for h/w to clear corresponding bit in door-bell. * max. wait is 1 sec. */ - err = ufshcd_wait_for_register(hba, - REG_UTP_TRANSFER_REQ_DOOR_BELL, - mask, ~mask, 1000, 1000); - - return err; + return ufshcd_wait_for_register(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL, + mask, ~mask, 1000, 1000); }
static int
From: Bart Van Assche bvanassche@acm.org
[ Upstream commit d1a7644648b7cdacaf8d1013a4285001911e9bc8 ]
Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler.
Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org Reviewed-by: Stanley Chu stanley.chu@mediatek.com Reviewed-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 1b32d4f4e21e..9c6c7fa90a7f 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -679,17 +679,28 @@ static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) }
/** - * ufshcd_utrl_clear - Clear a bit in UTRLCLR register + * ufshcd_utrl_clear() - Clear requests from the controller request list. * @hba: per adapter instance - * @pos: position of the bit to be cleared + * @mask: mask with one bit set for each request to be cleared */ -static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) +static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 mask) { if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) - ufshcd_writel(hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); - else - ufshcd_writel(hba, ~(1 << pos), - REG_UTP_TRANSFER_REQ_LIST_CLEAR); + mask = ~mask; + /* + * From the UFSHCI specification: "UTP Transfer Request List CLear + * Register (UTRLCLR): This field is bit significant. Each bit + * corresponds to a slot in the UTP Transfer Request List, where bit 0 + * corresponds to request slot 0. A bit in this field is set to ‘0’ + * by host software to indicate to the host controller that a transfer + * request slot is cleared. The host controller + * shall free up any resources associated to the request slot + * immediately, and shall set the associated bit in UTRLDBR to ‘0’. The + * host software indicates no change to request slots by setting the + * associated bits in this field to ‘1’. Bits in this field shall only + * be set ‘1’ or ‘0’ by host software when UTRLRSR is set to ‘1’." + */ + ufshcd_writel(hba, ~mask, REG_UTP_TRANSFER_REQ_LIST_CLEAR); }
/** @@ -2646,15 +2657,18 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, return ufshcd_compose_devman_upiu(hba, lrbp); }
-static int -ufshcd_clear_cmd(struct ufs_hba *hba, int tag) +/* + * Clear all the requests from the controller for which a bit has been set in + * @mask and wait until the controller confirms that these requests have been + * cleared. + */ +static int ufshcd_clear_cmds(struct ufs_hba *hba, u32 mask) { unsigned long flags; - u32 mask = 1 << tag;
/* clear outstanding transaction before retry */ spin_lock_irqsave(hba->host->host_lock, flags); - ufshcd_utrl_clear(hba, tag); + ufshcd_utrl_clear(hba, mask); spin_unlock_irqrestore(hba->host->host_lock, flags);
/* @@ -2744,7 +2758,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, err = -ETIMEDOUT; dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", __func__, lrbp->task_tag); - if (!ufshcd_clear_cmd(hba, lrbp->task_tag)) + if (!ufshcd_clear_cmds(hba, 1U << lrbp->task_tag)) /* successfully cleared the command, retry if needed */ err = -EAGAIN; /* @@ -6577,7 +6591,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) /* clear the commands that were pending for corresponding LUN */ for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) { if (hba->lrb[pos].lun == lun) { - err = ufshcd_clear_cmd(hba, pos); + err = ufshcd_clear_cmds(hba, 1U << pos); if (err) break; } @@ -6680,7 +6694,7 @@ static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag) goto out; }
- err = ufshcd_clear_cmd(hba, tag); + err = ufshcd_clear_cmds(hba, 1U << tag); if (err) dev_err(hba->dev, "%s: Failed clearing cmd at tag %d, err %d\n", __func__, tag, err);
Hi!
[ Upstream commit d1a7644648b7cdacaf8d1013a4285001911e9bc8 ]
Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler.
This and "scsi: ufs: Simplify ufshcd_clear_cmd()" are not really bugfixes. Patch they are preparing for is not queued for 5.10-stable.
Please drop.
Best regards, Pavel
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit e87c65aeb46ca4f5b7dc08531200bcb8a426c62e ]
The existing code uses pm_runtime_get_sync/put_autosuspend, but pm_runtime was not explicitly enabled. The autosuspend delay was not set either, the value is set to 5s since HDMI is rather painful to resume.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20220616222910.136854-2-pierre-louis.bossart@linux... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/x86/intel_hdmi_audio.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index dbaa43ffbbd2..2c150bce30bb 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -33,6 +33,8 @@ #include <drm/intel_lpe_audio.h> #include "intel_hdmi_audio.h"
+#define INTEL_HDMI_AUDIO_SUSPEND_DELAY_MS 5000 + #define for_each_pipe(card_ctx, pipe) \ for ((pipe) = 0; (pipe) < (card_ctx)->num_pipes; (pipe)++) #define for_each_port(card_ctx, port) \ @@ -1836,8 +1838,11 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) pdata->notify_audio_lpe = notify_audio_lpe; spin_unlock_irq(&pdata->lpe_audio_slock);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, INTEL_HDMI_AUDIO_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_enable(&pdev->dev); pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_idle(&pdev->dev);
dev_dbg(&pdev->dev, "%s: handle pending notification\n", __func__); for_each_port(card_ctx, port) {
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit bb30b453fedac277d66220431fd7063d9ddc10d8 ]
The current code does not check for errors and does not release the reference on errors.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20220616222910.136854-3-pierre-louis.bossart@linux... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/x86/intel_hdmi_audio.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index 2c150bce30bb..bb0a03e14fed 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1067,7 +1067,9 @@ static int had_pcm_open(struct snd_pcm_substream *substream) intelhaddata = snd_pcm_substream_chip(substream); runtime = substream->runtime;
- pm_runtime_get_sync(intelhaddata->dev); + retval = pm_runtime_resume_and_get(intelhaddata->dev); + if (retval < 0) + return retval;
/* set the runtime hw parameter with local snd_pcm_hardware struct */ runtime->hw = had_pcm_hardware; @@ -1564,8 +1566,12 @@ static void had_audio_wq(struct work_struct *work) container_of(work, struct snd_intelhad, hdmi_audio_wq); struct intel_hdmi_lpe_audio_pdata *pdata = ctx->dev->platform_data; struct intel_hdmi_lpe_audio_port_pdata *ppdata = &pdata->port[ctx->port]; + int ret; + + ret = pm_runtime_resume_and_get(ctx->dev); + if (ret < 0) + return;
- pm_runtime_get_sync(ctx->dev); mutex_lock(&ctx->mutex); if (ppdata->pipe < 0) { dev_dbg(ctx->dev, "%s: Event: HAD_NOTIFY_HOT_UNPLUG : port = %d\n",
From: Xu Jia xujia39@huawei.com
[ Upstream commit 2b04495e21cdb9b45c28c6aeb2da560184de20a3 ]
Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command(). This should be caused by the subtracting from sp->rx_count_cooked before. It seems that sp->rx_count_cooked value is changed to 0, which bypassed the previous judgment.
The situation is shown below:
(Thread 1) | (Thread 2) decode_std_command() | resync_tnc() ... | if (rest == 2) | sp->rx_count_cooked -= 2; | else if (rest == 3) | ... | sp->rx_count_cooked = 0; sp->rx_count_cooked -= 1; | for (i = 0; i < sp->rx_count_cooked; i++) // report error checksum += sp->cooked_buf[i];
sp->rx_count_cooked is a shared variable but is not protected by a lock. The same applies to sp->rx_count. This patch adds a lock to fix the bug.
The fail log is shown below: ======================================================================= UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31 index 400 is out of range for type 'unsigned char [400]' CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0756a #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_out_of_bounds.cold+0x62/0x6c sixpack_receive_buf+0xfda/0x1330 tty_ldisc_receive_buf+0x13e/0x180 tty_port_default_receive_buf+0x6d/0xa0 flush_to_ldisc+0x213/0x3f0 process_one_work+0x98f/0x1620 worker_thread+0x665/0x1080 kthread+0x2e9/0x3a0 ret_from_fork+0x1f/0x30 ...
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Xu Jia xujia39@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/hamradio/6pack.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 83dc1c2c3b84..d92df9bafbbd 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -99,6 +99,7 @@ struct sixpack {
unsigned int rx_count; unsigned int rx_count_cooked; + spinlock_t rxlock;
int mtu; /* Our mtu (to spot changes!) */ int buffsize; /* Max buffers sizes */ @@ -570,6 +571,7 @@ static int sixpack_open(struct tty_struct *tty) sp->dev = dev;
spin_lock_init(&sp->lock); + spin_lock_init(&sp->rxlock); refcount_set(&sp->refcnt, 1); init_completion(&sp->dead);
@@ -925,6 +927,7 @@ static void decode_std_command(struct sixpack *sp, unsigned char cmd) sp->led_state = 0x60; /* fill trailing bytes with zeroes */ sp->tty->ops->write(sp->tty, &sp->led_state, 1); + spin_lock_bh(&sp->rxlock); rest = sp->rx_count; if (rest != 0) for (i = rest; i <= 3; i++) @@ -942,6 +945,7 @@ static void decode_std_command(struct sixpack *sp, unsigned char cmd) sp_bump(sp, 0); } sp->rx_count_cooked = 0; + spin_unlock_bh(&sp->rxlock); } break; case SIXP_TX_URUN: printk(KERN_DEBUG "6pack: TX underrun\n"); @@ -971,8 +975,11 @@ sixpack_decode(struct sixpack *sp, const unsigned char *pre_rbuff, int count) decode_prio_command(sp, inbyte); else if ((inbyte & SIXP_STD_CMD_MASK) != 0) decode_std_command(sp, inbyte); - else if ((sp->status & SIXP_RX_DCD_MASK) == SIXP_RX_DCD_MASK) + else if ((sp->status & SIXP_RX_DCD_MASK) == SIXP_RX_DCD_MASK) { + spin_lock_bh(&sp->rxlock); decode_data(sp, inbyte); + spin_unlock_bh(&sp->rxlock); + } } }
From: Wentao_Liang Wentao_Liang_g@163.com
[ Upstream commit 8fc74d18639a2402ca52b177e990428e26ea881f ]
The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister.
4721. static void vxge_remove(struct pci_dev *pdev) 4722. { 4723. struct __vxge_hw_device *hldev; 4724. struct vxgedev *vdev; … 4731. vdev = netdev_priv(hldev->ndev); … 4740. vxge_device_unregister(hldev); 4741. /* Do not call pci_disable_sriov here, as it will break child devices */ 4742. vxge_hw_device_terminate(hldev); 4743. iounmap(vdev->bar0); … 4749 vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", 4750 __func__, __LINE__); 4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, 4752 __LINE__); 4753. }
This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN.
/***************************start**************************/
root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove [ 178.296316] vxge_remove [ 182.057081] ================================================================== [ 182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c [ 182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119 [ 182.057983] [ 182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5 [ 182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 182.059463] Call Trace: [ 182.059726] <TASK> [ 182.060017] dump_stack_lvl+0x34/0x44 [ 182.060316] print_report.cold+0xb2/0x6b7 [ 182.060401] ? kfree+0x89/0x290 [ 182.060478] ? vxge_remove+0xe0/0x15c [ 182.060545] kasan_report+0xa9/0x120 [ 182.060629] ? vxge_remove+0xe0/0x15c [ 182.060706] vxge_remove+0xe0/0x15c [ 182.060793] pci_device_remove+0x5d/0xe0 [ 182.060968] device_release_driver_internal+0xf1/0x180 [ 182.061063] pci_stop_bus_device+0xae/0xe0 [ 182.061150] pci_stop_and_remove_bus_device_locked+0x11/0x20 [ 182.061236] remove_store+0xc6/0xe0 [ 182.061297] ? subordinate_bus_number_show+0xc0/0xc0 [ 182.061359] ? __mutex_lock_slowpath+0x10/0x10 [ 182.061438] ? sysfs_kf_write+0x6d/0xa0 [ 182.061525] kernfs_fop_write_iter+0x1b0/0x260 [ 182.061610] ? sysfs_kf_bin_read+0xf0/0xf0 [ 182.061695] new_sync_write+0x209/0x310 [ 182.061789] ? new_sync_read+0x310/0x310 [ 182.061865] ? cgroup_rstat_updated+0x5c/0x170 [ 182.061937] ? preempt_count_sub+0xf/0xb0 [ 182.061995] ? pick_next_entity+0x13a/0x220 [ 182.062063] ? __inode_security_revalidate+0x44/0x80 [ 182.062155] ? security_file_permission+0x46/0x2a0 [ 182.062230] vfs_write+0x33f/0x3e0 [ 182.062303] ksys_write+0xb4/0x150 [ 182.062369] ? __ia32_sys_read+0x40/0x40 [ 182.062451] do_syscall_64+0x3b/0x90 [ 182.062531] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 182.062894] RIP: 0033:0x7f3f37d17274 [ 182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 182.064117] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3f37d17274 [ 182.064219] RDX: 0000000000000002 RSI: 000055bbec327180 RDI: 0000000000000001 [ 182.064315] RBP: 000055bbec327180 R08: 000000000000000a R09: 00007f3f37de7cf0 [ 182.064414] R10: 000000000000000a R11: 0000000000000246 R12: 00007f3f37de8760 [ 182.064513] R13: 0000000000000002 R14: 00007f3f37de3760 R15: 0000000000000002 [ 182.064691] </TASK> [ 182.064916] [ 182.065224] The buggy address belongs to the physical page: [ 182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6c76 [ 182.067419] flags: 0x100000000000000(node=0|zone=1) [ 182.068997] raw: 0100000000000000 0000000000000000 ffffea00001b1d88 0000000000000000 [ 182.069118] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 182.069294] page dumped because: kasan: bad access detected [ 182.069331] [ 182.069360] Memory state around the buggy address: [ 182.070006] ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070136] ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070305] ^ [ 182.070456] ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070505] ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070606] ================================================================== [ 182.071374] Disabling lock debugging due to kernel taint
/*****************************end*****************************/
After fixing the bug as done in the patch, we can find KASAN do not report the bug and the device(00:03.0) has been successfully removed.
/*****************************start***************************/
root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove root@kernel:~#
/******************************end****************************/
Signed-off-by: Wentao_Liang Wentao_Liang_g@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 56556373548c..f2c87e5a1038 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -4776,10 +4776,10 @@ static void vxge_remove(struct pci_dev *pdev) for (i = 0; i < vdev->no_of_vpath; i++) vxge_free_mac_add_list(&vdev->vpaths[i]);
+ iounmap(vdev->bar0); vxge_device_unregister(hldev); /* Do not call pci_disable_sriov here, as it will break child devices */ vxge_hw_device_terminate(hldev); - iounmap(vdev->bar0); pci_release_region(pdev, 0); pci_disable_device(pdev); driver_config->config_dev_cnt--;
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit ca5dabcff1df6bc8c413922b5fa63cc602858803 ]
When CONFIG_KASAN is selected, we expect prom_init to use __memset() because it is too early to use memset().
But with CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, the compiler adds calls to memset() to clear objects on stack, hence the following failure:
PROMCHK arch/powerpc/kernel/prom_init_check Error: External symbol 'memset' referenced from prom_init.c make[2]: *** [arch/powerpc/kernel/Makefile:204 : arch/powerpc/kernel/prom_init_check] Erreur 1
prom_find_machine_type() is called from prom_init() and is called only once, so lets put compat[] in BSS instead of stack to avoid that.
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/3802811f7cf94f730be44688539c01bba3a3b5c0.165487580... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/prom_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 9e71c0739f08..03c5ef29bd31 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2265,7 +2265,7 @@ static void __init prom_init_stdout(void)
static int __init prom_find_machine_type(void) { - char compat[256]; + static char compat[256] __prombss; int len, i = 0; #ifdef CONFIG_PPC64 phandle rtas;
From: Xiang wangx wangxiang@cdjrlc.com
[ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]
Delete the redundant word 'its'.
Signed-off-by: Xiang wangx wangxiang@cdjrlc.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/skeletonfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c index bcacfb6934fa..3d4d78362ede 100644 --- a/drivers/video/fbdev/skeletonfb.c +++ b/drivers/video/fbdev/skeletonfb.c @@ -96,7 +96,7 @@ static const struct fb_fix_screeninfo xxxfb_fix = {
/* * Modern graphical hardware not only supports pipelines but some - * also support multiple monitors where each display can have its + * also support multiple monitors where each display can have * its own unique data. In this case each display could be * represented by a separate framebuffer device thus a separate * struct fb_info. Now the struct xxx_par represents the graphics
From: Petr Cvek petrcvekcz@gmail.com
[ Upstream commit 25c9a15fb7bbfafb94dd3b4e3165c18b8e1bd039 ]
Aperture size for i9x5 variants is determined from PCI base address.
if (pci_resource_start(pdev, 2) & 0x08000000) *aperture_size = MB(128); ...
This condition is incorrect as 128 MiB address can have the address set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just use pci_resource_len().
The true settings of the aperture size is in the MSAC register, which could be used instead. However the value is used only as an info message, so it doesn't matter.
Signed-off-by: Petr Cvek petrcvekcz@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/video/fbdev/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c index 57aff7450bce..2086e06532ee 100644 --- a/drivers/video/fbdev/intelfb/intelfbhw.c +++ b/drivers/video/fbdev/intelfb/intelfbhw.c @@ -201,13 +201,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size, case PCI_DEVICE_ID_INTEL_945GME: case PCI_DEVICE_ID_INTEL_965G: case PCI_DEVICE_ID_INTEL_965GM: - /* 915, 945 and 965 chipsets support a 256MB aperture. - Aperture size is determined by inspected the - base address of the aperture. */ - if (pci_resource_start(pdev, 2) & 0x08000000) - *aperture_size = MB(128); - else - *aperture_size = MB(256); + /* + * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB + * aperture. Determine size from PCI resource length. + */ + *aperture_size = pci_resource_len(pdev, 2); break; default: if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
From: Hyunwoo Kim imv4bel@gmail.com
[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user().
Signed-off-by: Hyunwoo Kim imv4bel@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/pxa3xx-gcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c index 9421d14d0eb0..9e9888e40c57 100644 --- a/drivers/video/fbdev/pxa3xx-gcu.c +++ b/drivers/video/fbdev/pxa3xx-gcu.c @@ -381,7 +381,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff, struct pxa3xx_gcu_batch *buffer; struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
- int words = count / 4; + size_t words = count / 4;
/* Does not need to be atomic. There's a lock in user space, * but anyhow, this is just for statistics. */
From: Yihao Han hanyihao@vivo.com
[ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]
clk_put() already checks the clk ptr using !clk and IS_ERR() so there is no need to check it again before calling it.
Signed-off-by: Yihao Han hanyihao@vivo.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/simplefb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c index 533a047d07a2..85cfda4f4cf8 100644 --- a/drivers/video/fbdev/simplefb.c +++ b/drivers/video/fbdev/simplefb.c @@ -225,8 +225,7 @@ static int simplefb_clocks_get(struct simplefb_par *par, if (IS_ERR(clock)) { if (PTR_ERR(clock) == -EPROBE_DEFER) { while (--i >= 0) { - if (par->clks[i]) - clk_put(par->clks[i]); + clk_put(par->clks[i]); } kfree(par->clks); return -EPROBE_DEFER;
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 650c9caba32a0167a018cca0fab32a2965d23513 ]
At btrfs_replace_file_extents(), if we fail to migrate reserved metadata space from the transaction block reserve into the local block reserve, we trigger a BUG_ON(). This is because it should not be possible to have a failure here, as we reserved more space when we started the transaction than the space we want to migrate. However having a BUG_ON() is way too drastic, we can perfectly handle the failure and return the error to the caller. So just do that instead, and add a WARN_ON() to make it easier to notice the failure if it ever happens (which is particularly useful for fstests, and the warning will trigger a failure of a test case).
Reviewed-by: Boris Burkov boris@bur.io Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/file.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 416a1b753ff6..b574143653e8 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2651,7 +2651,8 @@ int btrfs_replace_file_extents(struct inode *inode, struct btrfs_path *path,
ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, rsv, min_size, false); - BUG_ON(ret); + if (WARN_ON(ret)) + goto out_trans; trans->block_rsv = rsv;
cur_offset = start; @@ -2743,7 +2744,8 @@ int btrfs_replace_file_extents(struct inode *inode, struct btrfs_path *path,
ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, rsv, min_size, false); - BUG_ON(ret); /* shouldn't happen */ + if (WARN_ON(ret)) + break; trans->block_rsv = rsv;
if (!extent_info) {
From: Liang He windhl@126.com
[ Upstream commit 4becf6417bbdc293734a590fe4ed38437bbcea2c ]
In ranchu_measure_hpt_freq(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_put_node() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/generic/board-ranchu.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/mips/generic/board-ranchu.c b/arch/mips/generic/board-ranchu.c index a89aaad59cb1..930c45041882 100644 --- a/arch/mips/generic/board-ranchu.c +++ b/arch/mips/generic/board-ranchu.c @@ -44,6 +44,7 @@ static __init unsigned int ranchu_measure_hpt_freq(void) __func__);
rtc_base = of_iomap(np, 0); + of_node_put(np); if (!rtc_base) panic("%s(): Failed to ioremap Goldfish RTC base!", __func__);
From: Liang He windhl@126.com
[ Upstream commit 608d94cb84c42585058d692f2fe5d327f8868cdb ]
In update_gic_frequency_dt(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/mti-malta/malta-time.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 7efcfe0c9cd4..7ac06bc8a86e 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -219,6 +219,8 @@ static void update_gic_frequency_dt(void)
if (of_update_property(node, &gic_frequency_prop) < 0) pr_err("error updating gic frequency property\n"); + + of_node_put(node); }
#endif
From: Liang He windhl@126.com
[ Upstream commit 48ca54e39173d1ed4c4dc8cf045484014bb26eaf ]
In plat_of_remap_node(), plat_of_remap_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/ralink/of.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index 3017263ac4f9..65087b1dfb38 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -40,6 +40,8 @@ __iomem void *plat_of_remap_node(const char *node) if (of_address_to_resource(np, 0, &res)) panic("Failed to get resource for %s", node);
+ of_node_put(np); + if (!request_mem_region(res.start, resource_size(&res), res.name))
From: Liang He windhl@126.com
[ Upstream commit 72a2af539fff975caadd9a4db3f99963569bd9c9 ]
In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/falcon/sysctrl.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c index 446a2536999b..f444d396bb11 100644 --- a/arch/mips/lantiq/falcon/sysctrl.c +++ b/arch/mips/lantiq/falcon/sysctrl.c @@ -208,6 +208,12 @@ void __init ltq_soc_init(void) of_address_to_resource(np_sysgpe, 0, &res_sys[2])) panic("Failed to get core resources");
+ of_node_put(np_status); + of_node_put(np_ebu); + of_node_put(np_sys1); + of_node_put(np_syseth); + of_node_put(np_sysgpe); + if ((request_mem_region(res_status.start, resource_size(&res_status), res_status.name) < 0) || (request_mem_region(res_ebu.start, resource_size(&res_ebu),
From: Liang He windhl@126.com
[ Upstream commit 76695592711ef1e215cc24ed3e1cd857d7fc3098 ]
In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/xway/sysctrl.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 084f6caba5f2..d444a1b98a72 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -441,6 +441,10 @@ void __init ltq_soc_init(void) of_address_to_resource(np_ebu, 0, &res_ebu)) panic("Failed to get core resources");
+ of_node_put(np_pmu); + of_node_put(np_cgu); + of_node_put(np_ebu); + if (!request_mem_region(res_pmu.start, resource_size(&res_pmu), res_pmu.name) || !request_mem_region(res_cgu.start, resource_size(&res_cgu),
From: Liang He windhl@126.com
[ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]
of_find_matching_node(), of_find_compatible_node() and of_find_node_by_path() will return node pointers with refcout incremented. We should call of_node_put() when they are not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/pic32/pic32mzda/init.c | 7 ++++++- arch/mips/pic32/pic32mzda/time.c | 3 +++ 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c index f232c77ff526..0b2cd87b33d3 100644 --- a/arch/mips/pic32/pic32mzda/init.c +++ b/arch/mips/pic32/pic32mzda/init.c @@ -123,13 +123,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup) np = of_find_compatible_node(NULL, NULL, lookup->compatible); if (np) { lookup->name = (char *)np->name; - if (lookup->phys_addr) + if (lookup->phys_addr) { + of_node_put(np); continue; + } if (!of_address_to_resource(np, 0, &res)) lookup->phys_addr = res.start; + of_node_put(np); } }
+ of_node_put(root); + return 0; }
diff --git a/arch/mips/pic32/pic32mzda/time.c b/arch/mips/pic32/pic32mzda/time.c index 7174e9abbb1b..777b515c52c8 100644 --- a/arch/mips/pic32/pic32mzda/time.c +++ b/arch/mips/pic32/pic32mzda/time.c @@ -32,6 +32,9 @@ static unsigned int pic32_xlate_core_timer_irq(void) goto default_map;
irq = irq_of_parse_and_map(node, 0); + + of_node_put(node); + if (!irq) goto default_map;
From: Liang He windhl@126.com
[ Upstream commit 3748d2185ac4c2c6f80989672253aad909ecaf95 ]
In icu_of_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/irq.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index 43c2f271e6ab..ee4d73d72500 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -407,6 +407,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) if (!ltq_eiu_membase) panic("Failed to remap eiu memory"); } + of_node_put(eiu_node);
return 0; }
From: Jernej Skrabec jernej.skrabec@gmail.com
[ Upstream commit f5aa16807aa4f99293044944590dde81364f434f ]
Kernel occasionally complains that there is mismatch in segment size when trying to render HW decoded videos and rendering them directly with sun4i DRM driver. Following message can be observed on H6 SoC:
[ 184.298308] ------------[ cut here ]------------ [ 184.298326] DMA-API: sun4i-drm display-engine: mapping sg segment longer than device claims to support [len=6144000] [max=65536] [ 184.298364] WARNING: CPU: 1 PID: 382 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2b0/0x350 [ 184.322997] CPU: 1 PID: 382 Comm: ffmpeg Not tainted 5.19.0-rc1+ #1331 [ 184.329533] Hardware name: Tanix TX6 (DT) [ 184.333544] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 184.340512] pc : debug_dma_map_sg+0x2b0/0x350 [ 184.344882] lr : debug_dma_map_sg+0x2b0/0x350 [ 184.349250] sp : ffff800009f33a50 [ 184.352567] x29: ffff800009f33a50 x28: 0000000000010000 x27: ffff000001b86c00 [ 184.359725] x26: ffffffffffffffff x25: ffff000005d8cc80 x24: 0000000000000000 [ 184.366879] x23: ffff80000939ab18 x22: 0000000000000001 x21: 0000000000000001 [ 184.374031] x20: 0000000000000000 x19: ffff0000018a7410 x18: ffffffffffffffff [ 184.381186] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 184.388338] x14: 0000000000000001 x13: ffff800009534e86 x12: 6f70707573206f74 [ 184.395493] x11: 20736d69616c6320 x10: 000000000000000a x9 : 0000000000010000 [ 184.402647] x8 : ffff8000093b6d40 x7 : ffff800009f33850 x6 : 000000000000000c [ 184.409800] x5 : ffff0000bf997940 x4 : 0000000000000000 x3 : 0000000000000027 [ 184.416953] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003960e80 [ 184.424106] Call trace: [ 184.426556] debug_dma_map_sg+0x2b0/0x350 [ 184.430580] __dma_map_sg_attrs+0xa0/0x110 [ 184.434687] dma_map_sgtable+0x28/0x4c [ 184.438447] vb2_dc_dmabuf_ops_map+0x60/0xcc [ 184.442729] __map_dma_buf+0x2c/0xd4 [ 184.446321] dma_buf_map_attachment+0xa0/0x130 [ 184.450777] drm_gem_prime_import_dev+0x7c/0x18c [ 184.455410] drm_gem_prime_fd_to_handle+0x1b8/0x214 [ 184.460300] drm_prime_fd_to_handle_ioctl+0x2c/0x40 [ 184.465190] drm_ioctl_kernel+0xc4/0x174 [ 184.469123] drm_ioctl+0x204/0x420 [ 184.472534] __arm64_sys_ioctl+0xac/0xf0 [ 184.476474] invoke_syscall+0x48/0x114 [ 184.480240] el0_svc_common.constprop.0+0x44/0xec [ 184.484956] do_el0_svc+0x2c/0xc0 [ 184.488283] el0_svc+0x2c/0x84 [ 184.491354] el0t_64_sync_handler+0x11c/0x150 [ 184.495723] el0t_64_sync+0x18c/0x190 [ 184.499397] ---[ end trace 0000000000000000 ]---
Fix that by setting DMA mask and segment size.
Signed-off-by: Jernej Skrabec jernej.skrabec@gmail.com Reviewed-by: Samuel Holland samuel@sholland.org Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/20220620181333.650301-1-jernej... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 29861fc81b35..65e72510a9a1 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -7,6 +7,7 @@ */
#include <linux/component.h> +#include <linux/dma-mapping.h> #include <linux/kfifo.h> #include <linux/module.h> #include <linux/of_graph.h> @@ -374,6 +375,13 @@ static int sun4i_drv_probe(struct platform_device *pdev)
INIT_KFIFO(list.fifo);
+ /* + * DE2 and DE3 cores actually supports 40-bit addresses, but + * driver does not. + */ + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + dma_set_max_seg_size(&pdev->dev, UINT_MAX); + for (i = 0;; i++) { struct device_node *pipeline = of_parse_phandle(np, "allwinner,pipelines",
From: Saud Farooqui farooqui_saud@hotmail.com
[ Upstream commit 85016f66af8506cb601fd4f4fde23ed327a266be ]
Added return statement in sun4i_layer_format_mod_supported() in case frontend is not present.
Signed-off-by: Saud Farooqui farooqui_saud@hotmail.com Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/PA4P189MB1421E93EF5F8E8E00E71B... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_layer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c index acfbfd4463a1..d585377de2a3 100644 --- a/drivers/gpu/drm/sun4i/sun4i_layer.c +++ b/drivers/gpu/drm/sun4i/sun4i_layer.c @@ -115,7 +115,7 @@ static bool sun4i_layer_format_mod_supported(struct drm_plane *plane, struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
if (IS_ERR_OR_NULL(layer->backend->frontend)) - sun4i_backend_format_is_supported(format, modifier); + return sun4i_backend_format_is_supported(format, modifier);
return sun4i_backend_format_is_supported(format, modifier) || sun4i_frontend_format_is_supported(format, modifier);
From: Kees Cook keescook@chromium.org
[ Upstream commit 1e70212e031528918066a631c9fdccda93a1ffaa ]
Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out.
Avoid the whole thing and just do a direct assignment. This results in no change to the executable code.
[This is a duplicate of commit 2c0ab32b73cf ("hinic: Replace memcpy() with direct assignment") which was applied to net-next.]
Cc: Nick Desaulniers ndesaulniers@google.com Cc: Tom Rix trix@redhat.com Cc: llvm@lists.linux.dev Link: https://github.com/ClangBuiltLinux/linux/issues/1592 Signed-off-by: Kees Cook keescook@chromium.org Reviewed-by: Gustavo A. R. Silva gustavoars@kernel.org Tested-by: Nathan Chancellor nathan@kernel.org # build Link: https://lore.kernel.org/r/20220616052312.292861-1-keescook@chromium.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/huawei/hinic/hinic_devlink.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_devlink.c b/drivers/net/ethernet/huawei/hinic/hinic_devlink.c index 2630d667f393..b5b95177f11f 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_devlink.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_devlink.c @@ -43,9 +43,7 @@ static bool check_image_valid(struct hinic_devlink_priv *priv, const u8 *buf,
for (i = 0; i < fw_image->fw_info.fw_section_cnt; i++) { len += fw_image->fw_section_info[i].fw_section_len; - memcpy(&host_image->image_section_info[i], - &fw_image->fw_section_info[i], - sizeof(struct fw_section_info_st)); + host_image->image_section_info[i] = fw_image->fw_section_info[i]; }
if (len != fw_image->fw_len ||
Hi!
From: Kees Cook keescook@chromium.org
[ Upstream commit 1e70212e031528918066a631c9fdccda93a1ffaa ]
Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out.
Avoid the whole thing and just do a direct assignment. This results in no change to the executable code.
This is just a workaround for Clang bug uncovered by 281d0c962752 ("fortify: Add Clang support"), and we don't have that in 5.10-stable.
Please drop.
Best regards, Pavel
+++ b/drivers/net/ethernet/huawei/hinic/hinic_devlink.c @@ -43,9 +43,7 @@ static bool check_image_valid(struct hinic_devlink_priv *priv, const u8 *buf, for (i = 0; i < fw_image->fw_info.fw_section_cnt; i++) { len += fw_image->fw_section_info[i].fw_section_len;
memcpy(&host_image->image_section_info[i],&fw_image->fw_section_info[i],sizeof(struct fw_section_info_st));
host_image->image_section_info[i] = fw_image->fw_section_info[i];
From: Alex Deucher alexander.deucher@amd.com
[ Upstream commit f15345a377c6ea9c7cc74f079616af8856aff37f ]
Certain GL unit tests for large textures can cause problems with the OOM killer since there is no way to link this memory to a process. This was originally mitigated (but not necessarily eliminated) by limiting the GTT size. The problem is this limit is often too low for many modern games so just make the limit 1/2 of system memory. The OOM accounting needs to be addressed, but we shouldn't prevent common 3D applications from being usable just to potentially mitigate that corner case.
Set default GTT size to max(3G, 1/2 of system ram) by default.
v2: drop previous logic and default to 3/4 of ram v3: default to half of ram to align with ttm v4: fix spelling in comment (Kent)
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1942 Reviewed-by: Marek Olšák marek.olsak@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 0b162928a248..b6d5987efc6a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -1960,18 +1960,26 @@ int amdgpu_ttm_init(struct amdgpu_device *adev) DRM_INFO("amdgpu: %uM of VRAM memory ready\n", (unsigned) (adev->gmc.real_vram_size / (1024 * 1024)));
- /* Compute GTT size, either bsaed on 3/4th the size of RAM size + /* Compute GTT size, either based on 1/2 the size of RAM size * or whatever the user passed on module init */ if (amdgpu_gtt_size == -1) { struct sysinfo si;
si_meminfo(&si); - gtt_size = min(max((AMDGPU_DEFAULT_GTT_SIZE_MB << 20), - adev->gmc.mc_vram_size), - ((uint64_t)si.totalram * si.mem_unit * 3/4)); - } - else + /* Certain GL unit tests for large textures can cause problems + * with the OOM killer since there is no way to link this memory + * to a process. This was originally mitigated (but not necessarily + * eliminated) by limiting the GTT size. The problem is this limit + * is often too low for many modern games so just make the limit 1/2 + * of system memory which aligns with TTM. The OOM accounting needs + * to be addressed, but we shouldn't prevent common 3D applications + * from being usable just to potentially mitigate that corner case. + */ + gtt_size = max((AMDGPU_DEFAULT_GTT_SIZE_MB << 20), + (u64)si.totalram * si.mem_unit / 2); + } else { gtt_size = (uint64_t)amdgpu_gtt_size << 20; + }
/* Initialize GTT memory pool */ r = amdgpu_gtt_mgr_init(adev, gtt_size);
From: Leo Savernik l.savernik@aon.at
[ Upstream commit 41f38043f884c66af4114a7109cf540d6222f450 ]
The Micron MTFDKBA2T0TFH device reports the same subsysem NQN for all devices. Add a quick to ignore it.
Signed-off-by: Leo Savernik l.savernik@aon.at Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 7de24a10dd92..a5b32f60b0e6 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3250,6 +3250,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(0x1cc1, 0x8201), /* ADATA SX8200PNP 512GB */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x1344, 0x5407), /* Micron Technology Inc NVMe SSD */ + .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN }, { PCI_DEVICE(0x1c5c, 0x1504), /* SK Hynix PC400 */ .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE(0x15b7, 0x2001), /* Sandisk Skyhawk */
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit c1c2a15c2b5379ea8e44dcdcc298e3de42076ba0 ]
If a platform device's remove callback returns non-zero, the device core emits a warning and still removes the device and calls the devm cleanup callbacks.
So it's not save to not unregister the gpiochip because on the next request to a GPIO the driver accesses kfree()'d memory. Also if an IRQ triggers, the freed memory is accessed.
Instead rely on the GPIO framework to ensure that after gpiochip_remove() all GPIOs are freed and so the corresponding IRQs are unmapped.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-grgpio.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-)
diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c index f954359c9544..46f6158d1c71 100644 --- a/drivers/gpio/gpio-grgpio.c +++ b/drivers/gpio/gpio-grgpio.c @@ -435,25 +435,13 @@ static int grgpio_probe(struct platform_device *ofdev) static int grgpio_remove(struct platform_device *ofdev) { struct grgpio_priv *priv = platform_get_drvdata(ofdev); - int i; - int ret = 0; - - if (priv->domain) { - for (i = 0; i < GRGPIO_MAX_NGPIO; i++) { - if (priv->uirqs[i].refcnt != 0) { - ret = -EBUSY; - goto out; - } - } - }
gpiochip_remove(&priv->gc);
if (priv->domain) irq_domain_remove(priv->domain);
-out: - return ret; + return 0; }
static const struct of_device_id grgpio_match[] = {
linux-stable-mirror@lists.linaro.org
-
Pavel Machek -
Sasha Levin