From: Yi Yang yiyang13@huawei.com
[ Upstream commit d81ffb87aaa75f842cd7aa57091810353755b3e6 ]
Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference.
Signed-off-by: Yi Yang yiyang13@huawei.com Reviewed-by: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/vcc.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c index e11383ae1e7e3..71356d9684bac 100644 --- a/drivers/tty/vcc.c +++ b/drivers/tty/vcc.c @@ -578,18 +578,22 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id) return -ENOMEM;
name = kstrdup(dev_name(&vdev->dev), GFP_KERNEL); + if (!name) { + rv = -ENOMEM; + goto free_port; + }
rv = vio_driver_init(&port->vio, vdev, VDEV_CONSOLE_CON, vcc_versions, ARRAY_SIZE(vcc_versions), NULL, name); if (rv) - goto free_port; + goto free_name;
port->vio.debug = vcc_dbg_vio; vcc_ldc_cfg.debug = vcc_dbg_ldc;
rv = vio_ldc_alloc(&port->vio, &vcc_ldc_cfg, port); if (rv) - goto free_port; + goto free_name;
spin_lock_init(&port->lock);
@@ -623,6 +627,11 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id) goto unreg_tty; } port->domain = kstrdup(domain, GFP_KERNEL); + if (!port->domain) { + rv = -ENOMEM; + goto unreg_tty; + } +
mdesc_release(hp);
@@ -652,8 +661,9 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id) vcc_table_remove(port->index); free_ldc: vio_ldc_free(&port->vio); -free_port: +free_name: kfree(name); +free_port: kfree(port);
return rv;
From: Niklas Schnelle schnelle@linux.ibm.com
[ Upstream commit 7ca9f9ba8aa7380dee5dd8346b57bbaf198b075a ]
A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD quirk and adding its compile time dependency on HAS_IOPORT. In order to minimize the number of #ifdefs in C files and make that patch easier to read first group the code together. This is pure code movement no functional change is intended.
Co-developed-by: Arnd Bergmann arnd@kernel.org Signed-off-by: Arnd Bergmann arnd@kernel.org Signed-off-by: Niklas Schnelle schnelle@linux.ibm.com Link: https://lore.kernel.org/r/20230911125653.1393895-2-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/pci-quirks.c | 119 +++++++++++++++++----------------- drivers/usb/host/pci-quirks.h | 14 ++-- 2 files changed, 68 insertions(+), 65 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index ef08d68b97149..4b0e344916ebc 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -60,6 +60,22 @@ #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+/* ASMEDIA quirk use */ +#define ASMT_DATA_WRITE0_REG 0xF8 +#define ASMT_DATA_WRITE1_REG 0xFC +#define ASMT_CONTROL_REG 0xE0 +#define ASMT_CONTROL_WRITE_BIT 0x02 +#define ASMT_WRITEREG_CMD 0x10423 +#define ASMT_FLOWCTL_ADDR 0xFA30 +#define ASMT_FLOWCTL_DATA 0xBA +#define ASMT_PSEUDO_DATA 0 + +/* Intel quirk use */ +#define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB2PRM 0xD4 +#define USB_INTEL_USB3_PSSEN 0xD8 +#define USB_INTEL_USB3PRM 0xDC + /* AMD quirk use */ #define AB_REG_BAR_LOW 0xe0 #define AB_REG_BAR_HIGH 0xe1 @@ -93,21 +109,6 @@ #define NB_PIF0_PWRDOWN_0 0x01100012 #define NB_PIF0_PWRDOWN_1 0x01100013
-#define USB_INTEL_XUSB2PR 0xD0 -#define USB_INTEL_USB2PRM 0xD4 -#define USB_INTEL_USB3_PSSEN 0xD8 -#define USB_INTEL_USB3PRM 0xDC - -/* ASMEDIA quirk use */ -#define ASMT_DATA_WRITE0_REG 0xF8 -#define ASMT_DATA_WRITE1_REG 0xFC -#define ASMT_CONTROL_REG 0xE0 -#define ASMT_CONTROL_WRITE_BIT 0x02 -#define ASMT_WRITEREG_CMD 0x10423 -#define ASMT_FLOWCTL_ADDR 0xFA30 -#define ASMT_FLOWCTL_DATA 0xBA -#define ASMT_PSEUDO_DATA 0 - /* * amd_chipset_gen values represent AMD different chipset generations */ @@ -460,50 +461,6 @@ void usb_amd_quirk_pll_disable(void) } EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
-static int usb_asmedia_wait_write(struct pci_dev *pdev) -{ - unsigned long retry_count; - unsigned char value; - - for (retry_count = 1000; retry_count > 0; --retry_count) { - - pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value); - - if (value == 0xff) { - dev_err(&pdev->dev, "%s: check_ready ERROR", __func__); - return -EIO; - } - - if ((value & ASMT_CONTROL_WRITE_BIT) == 0) - return 0; - - udelay(50); - } - - dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); - return -ETIMEDOUT; -} - -void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) -{ - if (usb_asmedia_wait_write(pdev) != 0) - return; - - /* send command and address to device */ - pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD); - pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR); - pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); - - if (usb_asmedia_wait_write(pdev) != 0) - return; - - /* send data to device */ - pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA); - pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA); - pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); -} -EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol); - void usb_amd_quirk_pll_enable(void) { usb_amd_quirk_pll(0); @@ -633,6 +590,50 @@ bool usb_amd_pt_check_port(struct device *device, int port) } EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+static int usb_asmedia_wait_write(struct pci_dev *pdev) +{ + unsigned long retry_count; + unsigned char value; + + for (retry_count = 1000; retry_count > 0; --retry_count) { + + pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value); + + if (value == 0xff) { + dev_err(&pdev->dev, "%s: check_ready ERROR", __func__); + return -EIO; + } + + if ((value & ASMT_CONTROL_WRITE_BIT) == 0) + return 0; + + udelay(50); + } + + dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); + return -ETIMEDOUT; +} + +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) +{ + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send command and address to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); + + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send data to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); +} +EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol); + /* * Make sure the controller is completely inactive, unable to * generate interrupts or do DMA. diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index e729de21fad7a..cde2263a9d2e4 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -3,8 +3,6 @@ #define __LINUX_USB_PCI_QUIRKS_H
#ifdef CONFIG_USB_PCI -void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); -int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); bool usb_amd_hang_symptom_quirk(void); bool usb_amd_prefetch_quirk(void); @@ -12,23 +10,27 @@ void usb_amd_dev_put(void); bool usb_amd_quirk_pll_check(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); +void sb800_prefetch(struct device *dev, int on); +bool usb_amd_pt_check_port(struct device *device, int port); + +void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); +int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); -void sb800_prefetch(struct device *dev, int on); -bool usb_amd_pt_check_port(struct device *device, int port); #else struct pci_dev; static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} -static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} static inline void usb_amd_dev_put(void) {} -static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} static inline void sb800_prefetch(struct device *dev, int on) {} static inline bool usb_amd_pt_check_port(struct device *device, int port) { return false; } + +static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} +static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} #endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
From: Niklas Schnelle schnelle@linux.ibm.com
[ Upstream commit 358ad297e379ff548247e3e24c6619559942bfdd ]
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. With the AMD quirk handled USB PCI quirks still use inw() in uhci_check_and_reset_hc() and thus indirectly in quirk_usb_handoff_uhci(). Handle this by conditionally compiling uhci_check_and_reset_hc() and stubbing out quirk_usb_handoff_uhci() when HAS_IOPORT is not available.
Co-developed-by: Arnd Bergmann arnd@kernel.org Signed-off-by: Arnd Bergmann arnd@kernel.org Signed-off-by: Niklas Schnelle schnelle@linux.ibm.com Link: https://lore.kernel.org/r/20230911125653.1393895-4-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/pci-quirks.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 4b0e344916ebc..d9ac4cbe99518 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -634,6 +634,16 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) } EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) +{ + u16 cmd; + + return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask); +} + +#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY) + +#if defined(CONFIG_HAS_IOPORT) && IS_ENABLED(CONFIG_USB_UHCI_HCD) /* * Make sure the controller is completely inactive, unable to * generate interrupts or do DMA. @@ -715,14 +725,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) } EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
-static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) -{ - u16 cmd; - return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask); -} - #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO) -#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
static void quirk_usb_handoff_uhci(struct pci_dev *pdev) { @@ -742,6 +745,12 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev) uhci_check_and_reset_hc(pdev, base); }
+#else /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */ + +static void quirk_usb_handoff_uhci(struct pci_dev *pdev) {} + +#endif /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */ + static int mmio_resource_enabled(struct pci_dev *pdev, int idx) { return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
From: Hardik Gajjar hgajjar@de.adit-jv.com
[ Upstream commit a04224da1f3424b2c607b12a3bd1f0e302fb8231 ]
Previously, gadget assignment to the net device occurred exclusively during the initial binding attempt.
Nevertheless, the gadget pointer could change during bind/unbind cycles due to various conditions, including the unloading/loading of the UDC device driver or the detachment/reconnection of an OTG-capable USB hub device.
This patch relocates the gether_set_gadget() function out from ncm_opts->bound condition check, ensuring that the correct gadget is assigned during each bind request.
The provided logs demonstrate the consistency of ncm_opts throughout the power cycle, while the gadget may change.
* OTG hub connected during boot up and assignment of gadget and ncm_opts pointer
[ 2.366301] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105 [ 2.366304] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.366306] usb 2-1.5: Product: H2H Bridge [ 2.366308] usb 2-1.5: Manufacturer: Aptiv [ 2.366309] usb 2-1.5: SerialNumber: 13FEB2021 [ 2.427989] usb 2-1.5: New USB device found, VID=2996, PID=0105 [ 2.428959] dabridge 2-1.5:1.0: dabridge 2-4 total endpoints=5, 0000000093a8d681 [ 2.429710] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed [ 2.429714] dabridge 2-1.5:1.0: Hub 2-2 P(0151) V(06.87) [ 2.429956] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 2.430093] gadget 000000003c414d59 ------> gadget pointer
* NCM opts and associated gadget pointer during First ncm_bind
[ 34.763929] NCM opts 00000000aa304ac9 [ 34.763930] NCM gadget 000000003c414d59
* OTG capable hub disconnecte or assume driver unload.
[ 97.203114] usb 2-1: USB disconnect, device number 2 [ 97.203118] usb 2-1.1: USB disconnect, device number 3 [ 97.209217] usb 2-1.5: USB disconnect, device number 4 [ 97.230990] dabr_udc deleted
* Reconnect the OTG hub or load driver assaign new gadget pointer.
[ 111.534035] usb 2-1.1: New USB device found, idVendor=2996, idProduct=0120, bcdDevice= 6.87 [ 111.534038] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 111.534040] usb 2-1.1: Product: Vendor [ 111.534041] usb 2-1.1: Manufacturer: Aptiv [ 111.534042] usb 2-1.1: SerialNumber: Superior [ 111.535175] usb 2-1.1: New USB device found, VID=2996, PID=0120 [ 111.610995] usb 2-1.5: new high-speed USB device number 8 using xhci-hcd [ 111.630052] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105, bcdDevice=21.02 [ 111.630055] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 111.630057] usb 2-1.5: Product: H2H Bridge [ 111.630058] usb 2-1.5: Manufacturer: Aptiv [ 111.630059] usb 2-1.5: SerialNumber: 13FEB2021 [ 111.687464] usb 2-1.5: New USB device found, VID=2996, PID=0105 [ 111.690375] dabridge 2-1.5:1.0: dabridge 2-8 total endpoints=5, 000000000d87c961 [ 111.691172] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed [ 111.691176] dabridge 2-1.5:1.0: Hub 2-6 P(0151) V(06.87) [ 111.691646] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 111.692298] gadget 00000000dc72f7a9 --------> new gadget ptr on connect
* NCM opts and associated gadget pointer during second ncm_bind
[ 113.271786] NCM opts 00000000aa304ac9 -----> same opts ptr used during first bind [ 113.271788] NCM gadget 00000000dc72f7a9 ----> however new gaget ptr, that will not set in net_device due to ncm_opts->bound = true
Signed-off-by: Hardik Gajjar hgajjar@de.adit-jv.com Link: https://lore.kernel.org/r/20231020153324.82794-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/f_ncm.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index aabaedb2e0691..bd095ae569edd 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1429,7 +1429,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) struct usb_composite_dev *cdev = c->cdev; struct f_ncm *ncm = func_to_ncm(f); struct usb_string *us; - int status; + int status = 0; struct usb_ep *ep; struct f_ncm_opts *ncm_opts;
@@ -1447,22 +1447,17 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) f->os_desc_table[0].os_desc = &ncm_opts->ncm_os_desc; }
- /* - * in drivers/usb/gadget/configfs.c:configfs_composite_bind() - * configurations are bound in sequence with list_for_each_entry, - * in each configuration its functions are bound in sequence - * with list_for_each_entry, so we assume no race condition - * with regard to ncm_opts->bound access - */ - if (!ncm_opts->bound) { - mutex_lock(&ncm_opts->lock); - gether_set_gadget(ncm_opts->net, cdev->gadget); + mutex_lock(&ncm_opts->lock); + gether_set_gadget(ncm_opts->net, cdev->gadget); + if (!ncm_opts->bound) status = gether_register_netdev(ncm_opts->net); - mutex_unlock(&ncm_opts->lock); - if (status) - goto fail; - ncm_opts->bound = true; - } + mutex_unlock(&ncm_opts->lock); + + if (status) + goto fail; + + ncm_opts->bound = true; + us = usb_gstrings_attach(cdev, ncm_strings, ARRAY_SIZE(ncm_string_defs)); if (IS_ERR(us)) {
From: Marco Elver elver@google.com
[ Upstream commit 355f074609dbf3042900ea9d30fcd2b0c323a365 ]
syzbot reported:
| BUG: KCSAN: data-race in p9_fd_create / p9_fd_create | | read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0: | p9_fd_open net/9p/trans_fd.c:842 [inline] | p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092 | p9_client_create+0x595/0xa70 net/9p/client.c:1010 | v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410 | v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123 | legacy_get_tree+0x74/0xd0 fs/fs_context.c:611 | vfs_get_tree+0x51/0x190 fs/super.c:1519 | do_new_mount+0x203/0x660 fs/namespace.c:3335 | path_mount+0x496/0xb30 fs/namespace.c:3662 | do_mount fs/namespace.c:3675 [inline] | __do_sys_mount fs/namespace.c:3884 [inline] | [...] | | read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1: | p9_fd_open net/9p/trans_fd.c:842 [inline] | p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092 | p9_client_create+0x595/0xa70 net/9p/client.c:1010 | v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410 | v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123 | legacy_get_tree+0x74/0xd0 fs/fs_context.c:611 | vfs_get_tree+0x51/0x190 fs/super.c:1519 | do_new_mount+0x203/0x660 fs/namespace.c:3335 | path_mount+0x496/0xb30 fs/namespace.c:3662 | do_mount fs/namespace.c:3675 [inline] | __do_sys_mount fs/namespace.c:3884 [inline] | [...] | | value changed: 0x00008002 -> 0x00008802
Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and write files. This may happen concurrently if e.g. mounting process modifies the fd in another thread.
Mark the plain read-modify-writes as intentional data-races, with the assumption that the result of executing the accesses concurrently will always result in the same result despite the accesses themselves not being atomic.
Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com Signed-off-by: Marco Elver elver@google.com Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com Signed-off-by: Dominique Martinet asmadeus@codewreck.org Message-ID: 20231025103445.1248103-1-asmadeus@codewreck.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/9p/trans_fd.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index f359cfdc1858f..b44b77d3b35d1 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -835,14 +835,21 @@ static int p9_fd_open(struct p9_client *client, int rfd, int wfd) goto out_free_ts; if (!(ts->rd->f_mode & FMODE_READ)) goto out_put_rd; - /* prevent workers from hanging on IO when fd is a pipe */ - ts->rd->f_flags |= O_NONBLOCK; + /* Prevent workers from hanging on IO when fd is a pipe. + * It's technically possible for userspace or concurrent mounts to + * modify this flag concurrently, which will likely result in a + * broken filesystem. However, just having bad flags here should + * not crash the kernel or cause any other sort of bug, so mark this + * particular data race as intentional so that tooling (like KCSAN) + * can allow it and detect further problems. + */ + data_race(ts->rd->f_flags |= O_NONBLOCK); ts->wr = fget(wfd); if (!ts->wr) goto out_put_rd; if (!(ts->wr->f_mode & FMODE_WRITE)) goto out_put_wr; - ts->wr->f_flags |= O_NONBLOCK; + data_race(ts->wr->f_flags |= O_NONBLOCK);
client->trans = ts; client->status = Connected;
From: Dominique Martinet asmadeus@codewreck.org
[ Upstream commit 9b5c6281838fc84683dd99b47302d81fce399918 ]
W=1 warns about null argument to kprintf: In file included from fs/9p/xattr.c:12: In function ‘v9fs_xattr_get’, inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9: include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use an empty string instead of : - this is ok 9p-wise because p9pdu_vwritef serializes a null string and an empty string the same way (one '0' word for length) - since this degrades the print statements, add new single quotes for xattr's name delimter (Old: "file = (null)", new: "file = ''")
Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com Suggested-by: Su Hui suhui@nfschina.com Signed-off-by: Dominique Martinet asmadeus@codewreck.org Acked-by: Christian Schoenebeck linux_oss@crudebyte.com Message-ID: 20231025103445.1248103-2-asmadeus@codewreck.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/9p/xattr.c | 5 +++-- net/9p/client.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/9p/xattr.c b/fs/9p/xattr.c index ee331845e2c7a..31799ac10e33a 100644 --- a/fs/9p/xattr.c +++ b/fs/9p/xattr.c @@ -73,7 +73,7 @@ ssize_t v9fs_xattr_get(struct dentry *dentry, const char *name, struct p9_fid *fid; int ret;
- p9_debug(P9_DEBUG_VFS, "name = %s value_len = %zu\n", + p9_debug(P9_DEBUG_VFS, "name = '%s' value_len = %zu\n", name, buffer_size); fid = v9fs_fid_lookup(dentry); if (IS_ERR(fid)) @@ -144,7 +144,8 @@ int v9fs_fid_xattr_set(struct p9_fid *fid, const char *name,
ssize_t v9fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size) { - return v9fs_xattr_get(dentry, NULL, buffer, buffer_size); + /* Txattrwalk with an empty string lists xattrs instead */ + return v9fs_xattr_get(dentry, "", buffer, buffer_size); }
static int v9fs_xattr_handler_get(const struct xattr_handler *handler, diff --git a/net/9p/client.c b/net/9p/client.c index c4c1e44cd7ca3..3696e9373e687 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -2018,7 +2018,7 @@ struct p9_fid *p9_client_xattrwalk(struct p9_fid *file_fid, goto error; } p9_debug(P9_DEBUG_9P, - ">>> TXATTRWALK file_fid %d, attr_fid %d name %s\n", + ">>> TXATTRWALK file_fid %d, attr_fid %d name '%s'\n", file_fid->fid, attr_fid->fid, attr_name);
req = p9_client_rpc(clnt, P9_TXATTRWALK, "dds",
linux-stable-mirror@lists.linaro.org
-
Sasha Levin