The receiver should not be enabled until the port is opened so drop the bogus call to start rx from the setup code which is shared with the console implementation.
This was added for some confused implementation of hibernation support, but the receiver must not be started unconditionally as the port may not have been open when hibernating the system.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc: stable@vger.kernel.org # 6.2 Cc: Aniket Randive quic_arandive@quicinc.com Signed-off-by: Johan Hovold johan+linaro@kernel.org --- drivers/tty/serial/qcom_geni_serial.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..9ea6bd09e665 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode); - qcom_geni_serial_start_rx(uport); port->setup = true;
return 0;
Thanks Johan for the fixes.
On 10/1/2024 6:20 PM, Johan Hovold wrote:
The receiver should not be enabled until the port is opened so drop the bogus call to start rx from the setup code which is shared with the console implementation.
This was added for some confused implementation of hibernation support, but the receiver must not be started unconditionally as the port may not have been open when hibernating the system.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc:stable@vger.kernel.org # 6.2 Cc: Aniket Randivequic_arandive@quicinc.com Signed-off-by: Johan Hovoldjohan+linaro@kernel.org
drivers/tty/serial/qcom_geni_serial.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..9ea6bd09e665 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode);
- qcom_geni_serial_start_rx(uport);
Does it mean hibernation will break now ? Not sure if its tested with hibernation. I can see this call was added to port_setup specifically for hibernation but now after removing it, where is it getting fixed ? I think RX will not be initialized after hibernation.
port->setup = true; return 0; -- 2.45.2
On Tue, Oct 01, 2024 at 07:20:36PM GMT, Mukesh Kumar Savaliya wrote:
Thanks Johan for the fixes.
On 10/1/2024 6:20 PM, Johan Hovold wrote:
The receiver should not be enabled until the port is opened so drop the bogus call to start rx from the setup code which is shared with the console implementation.
This was added for some confused implementation of hibernation support, but the receiver must not be started unconditionally as the port may not have been open when hibernating the system.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc:stable@vger.kernel.org # 6.2 Cc: Aniket Randivequic_arandive@quicinc.com Signed-off-by: Johan Hovoldjohan+linaro@kernel.org
drivers/tty/serial/qcom_geni_serial.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..9ea6bd09e665 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode);
- qcom_geni_serial_start_rx(uport);
Does it mean hibernation will break now ? Not sure if its tested with hibernation. I can see this call was added to port_setup specifically for hibernation but now after removing it, where is it getting fixed ?
Can you explain how you're testing hibernation and on which platform this is done? I'd like to add this to my set of tests, but last time I tested I couldn't find a platform where we survived the restore processes (it's been a while though).
I think RX will not be initialized after hibernation.
qcom_geni_serial_port_setup() is invoked in multiple places, how come we don't perform this hibernation-specific operation in qcom_geni_serial_sys_hib_resume()? (And why is it called hib_resume when the kernel nomenclature for what it does is "restore"?)
Regards, Bjorn
port->setup = true; return 0; -- 2.45.2
On Tue, Oct 01, 2024 at 07:20:36PM +0530, Mukesh Kumar Savaliya wrote:
Thanks Johan for the fixes.
Thanks for taking a look.
On 10/1/2024 6:20 PM, Johan Hovold wrote:
The receiver should not be enabled until the port is opened so drop the bogus call to start rx from the setup code which is shared with the console implementation.
This was added for some confused implementation of hibernation support, but the receiver must not be started unconditionally as the port may not have been open when hibernating the system.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc:stable@vger.kernel.org # 6.2 Cc: Aniket Randivequic_arandive@quicinc.com Signed-off-by: Johan Hovoldjohan+linaro@kernel.org
@@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode);
- qcom_geni_serial_start_rx(uport);
Does it mean hibernation will break now ? Not sure if its tested with hibernation. I can see this call was added to port_setup specifically for hibernation but now after removing it, where is it getting fixed ? I think RX will not be initialized after hibernation.
Correct. As I alluded to in the commit message this "hibernation support" is quite broken already, but I was trying to avoid spending more time on this driver than I already have and just look the other way for the time being.
Note that rx is enabled by the serial core resume code, but then this hibernation hack added a call to the setup the port after resuming it, which would disable rx again were it not for this random call to start rx, which should never have been added here in the first place.
But as these platforms do not support hibernation in mainline, and the code broken anyway, I'll just rip it all out for v3.
Johan
Hi,
On Tue, Oct 1, 2024 at 5:51 AM Johan Hovold johan+linaro@kernel.org wrote:
The receiver should not be enabled until the port is opened so drop the bogus call to start rx from the setup code which is shared with the console implementation.
This was added for some confused implementation of hibernation support, but the receiver must not be started unconditionally as the port may not have been open when hibernating the system.
Could you provide a motivation for your patch in the description? Is patch needed for something (perhaps a future patch in the series)? Is it fixing a bug? Does it save power? Is the call harmless but cleaner to get rid of?
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc: stable@vger.kernel.org # 6.2 Cc: Aniket Randive quic_arandive@quicinc.com Signed-off-by: Johan Hovold johan+linaro@kernel.org
drivers/tty/serial/qcom_geni_serial.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..9ea6bd09e665 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode);
qcom_geni_serial_start_rx(uport);
FWIW, I found at least one thing that's broken by your patch. If you enable kgdb (but _not_ "kgdboc_earlycon") and then add "kgdbwait" to the kernel command line parameters then things will be broken after your patch. You'll drop into the debugger but can't interact with it. The "kgdboc_earlycon" path handles this because of "qcom_geni_serial_enable_early_read()" but it doesn't seem like there's anything that handles it for normal kgdb. If you drop in the debugger later it'll probably work if you've got an "agetty" running because that'll enable the RX path.
-Doug
On Thu, Oct 03, 2024 at 11:29:58AM -0700, Doug Anderson wrote:
On Tue, Oct 1, 2024 at 5:51 AM Johan Hovold johan+linaro@kernel.org wrote:
The receiver should not be enabled until the port is opened so drop the bogus call to start rx from the setup code which is shared with the console implementation.
This was added for some confused implementation of hibernation support, but the receiver must not be started unconditionally as the port may not have been open when hibernating the system.
Could you provide a motivation for your patch in the description? Is patch needed for something (perhaps a future patch in the series)? Is it fixing a bug? Does it save power? Is the call harmless but cleaner to get rid of?
I was trying to bring some order to this driver so that the receiver is enabled when the port is opened and disabled when it is closed again as expected, and get rid of the random calls added in places where they do not belong (e.g., as Bjorn also mentioned, why was the call to start rx added in the port setup code if it was needed for hibernation?).
Data "received" over the wire before opening the port should not be processed, but it also turns out that enabling the receiver before the port is opened can confuse the firmware and break the "stale" rx timer handling so that data is only forwarded in chunks of 12 bytes instead of when each char is received.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc: stable@vger.kernel.org # 6.2 Cc: Aniket Randive quic_arandive@quicinc.com Signed-off-by: Johan Hovold johan+linaro@kernel.org
drivers/tty/serial/qcom_geni_serial.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..9ea6bd09e665 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1152,7 +1152,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode);
qcom_geni_serial_start_rx(uport);FWIW, I found at least one thing that's broken by your patch. If you enable kgdb (but _not_ "kgdboc_earlycon") and then add "kgdbwait" to the kernel command line parameters then things will be broken after your patch. You'll drop into the debugger but can't interact with it. The "kgdboc_earlycon" path handles this because of "qcom_geni_serial_enable_early_read()" but it doesn't seem like there's anything that handles it for normal kgdb. If you drop in the debugger later it'll probably work if you've got an "agetty" running because that'll enable the RX path.
Ok, so the kgdb has started relying on this call since d8851a96ba25 ("tty: serial: qcom-geni-serial: Add a poll_init() function"). Thanks for pointing that out.
The polled console code should not be calling the port setup code unconditionally anyway so I'll fix this up as well in v3.
Johan
linux-stable-mirror@lists.linaro.org
-
Bjorn Andersson -
Doug Anderson -
Johan Hovold -
Johan Hovold -
Mukesh Kumar Savaliya