Fix error handling issues of `uart_get_rs485_mode()` function by reordering resources_init() to occur after uart_get_rs485_mode. Remove multiple goto paths and use dev_err_probe to simplify error paths.

Fixes: 4fcc287f3c69 ("serial: qcom-geni: Enable support for half-duplex mode") Cc: stable@vger.kernel.org Signed-off-by: Anup Kulkarni quic_anupkulk@quicinc.com --- v3->v4 - Added Fixes and Cc tag.

v2->v3 - Reordered the function resources_init. - Removed goto. - Added dev_err_probe.

v1->v2 - Updated commit message. --- drivers/tty/serial/qcom_geni_serial.c | 38 ++++++++++----------------- 1 file changed, 14 insertions(+), 24 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 32ec632fd080..be998dd45968 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1882,15 +1882,9 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) port->se.dev = &pdev->dev; port->se.wrapper = dev_get_drvdata(pdev->dev.parent);

- ret = port->dev_data->resources_init(uport); - if (ret) - return ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -EINVAL; - goto error; - } + if (!res) + return -EINVAL;

uport->mapbase = res->start;

@@ -1903,25 +1897,19 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) if (!data->console) { port->rx_buf = devm_kzalloc(uport->dev, DMA_RX_BUF_SIZE, GFP_KERNEL); - if (!port->rx_buf) { - ret = -ENOMEM; - goto error; - } + if (!port->rx_buf) + return -ENOMEM; }

port->name = devm_kasprintf(uport->dev, GFP_KERNEL, "qcom_geni_serial_%s%d", uart_console(uport) ? "console" : "uart", uport->line); - if (!port->name) { - ret = -ENOMEM; - goto error; - } + if (!port->name) + return -ENOMEM;

irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto error; - } + if (irq < 0) + return irq;

uport->irq = irq; uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE); @@ -1942,12 +1930,14 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) irq_set_status_flags(uport->irq, IRQ_NOAUTOEN); ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr, IRQF_TRIGGER_HIGH, port->name, uport); - if (ret) { - dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret); - goto error; - } + if (ret) + return dev_err_probe(uport->dev, ret, "Failed to get IRQ\n");

ret = uart_get_rs485_mode(uport); + if (ret) + return dev_err_probe(uport->dev, ret, "Failed to get rs485 mode\n"); + + ret = port->dev_data->resources_init(uport); if (ret) return ret;