arch_bpf_trampoline_size() provides JIT size of the BPF trampoline before the buffer for JIT'ing it is allocated. The total number of instructions emitted for BPF trampoline JIT code depends on where the final image is located. So, the size arrived at with the dummy pass in arch_bpf_trampoline_size() can vary from the actual size needed in arch_prepare_bpf_trampoline(). When the instructions accounted in arch_bpf_trampoline_size() is less than the number of instructions emitted during the actual JIT compile of the trampoline, the below warning is produced:

WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc

which is:

/* Make sure the trampoline generation logic doesn't overflow */ if (image && WARN_ON_ONCE(&image[ctx->idx] > (u32 *)rw_image_end - BPF_INSN_SAFETY)) {

So, during the dummy pass, instead of providing some arbitrary image location, account for maximum possible instructions if and when there is a dependency with image location for JIT'ing.

Fixes: d243b62b7bd3 ("powerpc64/bpf: Add support for bpf trampolines") Reported-by: Venkat Rao Bagalkote venkat88@linux.ibm.com Closes: https://lore.kernel.org/all/6168bfc8-659f-4b5a-a6fb-90a916dde3b3@linux.ibm.c... Cc: stable@vger.kernel.org # v6.13+ Acked-by: Naveen N Rao (AMD) naveen@kernel.org Tested-by: Venkat Rao Bagalkote venkat88@linux.ibm.com Signed-off-by: Hari Bathini hbathini@linux.ibm.com ---

Changes since v2: - Address review comments from Naveen: - Remove additional padding for 'case BPF_LD | BPF_IMM | BPF_DW:' in arch/powerpc/net/bpf_jit_comp*.c - Merge the if sequence in bpf_jit_emit_func_call_rel() with the other conditionals - Naveen, carried your Acked-by tag as the additional changes are minimal and in line with your suggestion. Feel free to update if you look at it differently. - Venkat, carried your Tested-by tag from v2 as the changes in v3 should not alter the test result. Feel free to update if you look at it differently.

Changes since v1: - Pass NULL for image during intial pass and account for max. possible instruction during this pass as Naveen suggested.

arch/powerpc/net/bpf_jit.h | 20 ++++++++++++++++--- arch/powerpc/net/bpf_jit_comp.c | 33 ++++++++++--------------------- arch/powerpc/net/bpf_jit_comp32.c | 6 ------ arch/powerpc/net/bpf_jit_comp64.c | 15 +++++++------- 4 files changed, 35 insertions(+), 39 deletions(-)

diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index 6beacaec63d3..4c26912c2e3c 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -51,8 +51,16 @@ EMIT(PPC_INST_BRANCH_COND | (((cond) & 0x3ff) << 16) | (offset & 0xfffc)); \ } while (0)

-/* Sign-extended 32-bit immediate load */ +/* + * Sign-extended 32-bit immediate load + * + * If this is a dummy pass (!image), account for + * maximum possible instructions. + */ #define PPC_LI32(d, i) do { \ + if (!image) \ + ctx->idx += 2; \ + else { \ if ((int)(uintptr_t)(i) >= -32768 && \ (int)(uintptr_t)(i) < 32768) \ EMIT(PPC_RAW_LI(d, i)); \ @@ -60,10 +68,15 @@ EMIT(PPC_RAW_LIS(d, IMM_H(i))); \ if (IMM_L(i)) \ EMIT(PPC_RAW_ORI(d, d, IMM_L(i))); \ - } } while(0) + } \ + } } while (0)

#ifdef CONFIG_PPC64 +/* If dummy pass (!image), account for maximum possible instructions */ #define PPC_LI64(d, i) do { \ + if (!image) \ + ctx->idx += 5; \ + else { \ if ((long)(i) >= -2147483648 && \ (long)(i) < 2147483648) \ PPC_LI32(d, i); \ @@ -84,7 +97,8 @@ if ((uintptr_t)(i) & 0x000000000000ffffULL) \ EMIT(PPC_RAW_ORI(d, d, (uintptr_t)(i) & \ 0xffff)); \ - } } while (0) + } \ + } } while (0) #define PPC_LI_ADDR PPC_LI64

#ifndef CONFIG_PPC_KERNEL_PCREL diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 2991bb171a9b..c0684733e9d6 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -504,10 +504,11 @@ static int invoke_bpf_prog(u32 *image, u32 *ro_image, struct codegen_context *ct EMIT(PPC_RAW_ADDI(_R3, _R1, regs_off)); if (!p->jited) PPC_LI_ADDR(_R4, (unsigned long)p->insnsi); - if (!create_branch(&branch_insn, (u32 *)&ro_image[ctx->idx], (unsigned long)p->bpf_func, - BRANCH_SET_LINK)) { - if (image) - image[ctx->idx] = ppc_inst_val(branch_insn); + /* Account for max possible instructions during dummy pass for size calculation */ + if (image && !create_branch(&branch_insn, (u32 *)&ro_image[ctx->idx], + (unsigned long)p->bpf_func, + BRANCH_SET_LINK)) { + image[ctx->idx] = ppc_inst_val(branch_insn); ctx->idx++; } else { EMIT(PPC_RAW_LL(_R12, _R25, offsetof(struct bpf_prog, bpf_func))); @@ -889,7 +890,8 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *rw_im bpf_trampoline_restore_tail_call_cnt(image, ctx, func_frame_offset, r4_off);

/* Reserve space to patch branch instruction to skip fexit progs */ - im->ip_after_call = &((u32 *)ro_image)[ctx->idx]; + if (ro_image) /* image is NULL for dummy pass */ + im->ip_after_call = &((u32 *)ro_image)[ctx->idx]; EMIT(PPC_RAW_NOP()); }

@@ -912,7 +914,8 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *rw_im }

if (flags & BPF_TRAMP_F_CALL_ORIG) { - im->ip_epilogue = &((u32 *)ro_image)[ctx->idx]; + if (ro_image) /* image is NULL for dummy pass */ + im->ip_epilogue = &((u32 *)ro_image)[ctx->idx]; PPC_LI_ADDR(_R3, im); ret = bpf_jit_emit_func_call_rel(image, ro_image, ctx, (unsigned long)__bpf_tramp_exit); @@ -973,25 +976,9 @@ int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags, struct bpf_tramp_links *tlinks, void *func_addr) { struct bpf_tramp_image im; - void *image; int ret;

- /* - * Allocate a temporary buffer for __arch_prepare_bpf_trampoline(). - * This will NOT cause fragmentation in direct map, as we do not - * call set_memory_*() on this buffer. - * - * We cannot use kvmalloc here, because we need image to be in - * module memory range. - */ - image = bpf_jit_alloc_exec(PAGE_SIZE); - if (!image) - return -ENOMEM; - - ret = __arch_prepare_bpf_trampoline(&im, image, image + PAGE_SIZE, image, - m, flags, tlinks, func_addr); - bpf_jit_free_exec(image); - + ret = __arch_prepare_bpf_trampoline(&im, NULL, NULL, NULL, m, flags, tlinks, func_addr); return ret; }

diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index c4db278dae36..0aace304dfe1 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -313,7 +313,6 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code u64 func_addr; u32 true_cond; u32 tmp_idx; - int j;

if (i && (BPF_CLASS(code) == BPF_ALU64 || BPF_CLASS(code) == BPF_ALU) && (BPF_CLASS(prevcode) == BPF_ALU64 || BPF_CLASS(prevcode) == BPF_ALU) && @@ -1099,13 +1098,8 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code * 16 byte instruction that uses two 'struct bpf_insn' */ case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */ - tmp_idx = ctx->idx; PPC_LI32(dst_reg_h, (u32)insn[i + 1].imm); PPC_LI32(dst_reg, (u32)insn[i].imm); - /* padding to allow full 4 instructions for later patching */ - if (!image) - for (j = ctx->idx - tmp_idx; j < 4; j++) - EMIT(PPC_RAW_NOP()); /* Adjust for two bpf instructions */ addrs[++i] = ctx->idx * 4; break; diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index 233703b06d7c..5daa77aee7f7 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -227,7 +227,14 @@ int bpf_jit_emit_func_call_rel(u32 *image, u32 *fimage, struct codegen_context * #ifdef CONFIG_PPC_KERNEL_PCREL reladdr = func_addr - local_paca->kernelbase;

- if (reladdr < (long)SZ_8G && reladdr >= -(long)SZ_8G) { + /* + * If fimage is NULL (the initial pass to find image size), + * account for the maximum no. of instructions possible. + */ + if (!fimage) { + ctx->idx += 7; + return 0; + } else if (reladdr < (long)SZ_8G && reladdr >= -(long)SZ_8G) { EMIT(PPC_RAW_LD(_R12, _R13, offsetof(struct paca_struct, kernelbase))); /* Align for subsequent prefix instruction */ if (!IS_ALIGNED((unsigned long)fimage + CTX_NIA(ctx), 8)) @@ -412,7 +419,6 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code u64 imm64; u32 true_cond; u32 tmp_idx; - int j;

/* * addrs[] maps a BPF bytecode address into a real offset from @@ -1046,12 +1052,7 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */ imm64 = ((u64)(u32) insn[i].imm) | (((u64)(u32) insn[i+1].imm) << 32); - tmp_idx = ctx->idx; PPC_LI64(dst_reg, imm64); - /* padding to allow full 5 instructions for later patching */ - if (!image) - for (j = ctx->idx - tmp_idx; j < 5; j++) - EMIT(PPC_RAW_NOP()); /* Adjust for two bpf instructions */ addrs[++i] = ctx->idx * 4; break;