From: Frieder Schrempf frieder.schrempf@kontron.de

The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet adapter deasserted anytime. Fix the polarity and mark it as always-on.

Anyway, using the regulator is only a workaround for the missing support of specifying a reset GPIO for USB devices in a generic way. As we don't have a solution for this at the moment, at least fix the current workaround.

Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf frieder.schrempf@kontron.de --- Changes in v2: * Fix the commit ref in the Fixes tag * Improve commit message * Remove useless change of uncontrolled reg_vdd_5v --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index 5f6fc4c2c529..a192a047f264 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -70,7 +70,9 @@ reg_rst_eth2: regulator-rst-eth2 { regulator-name = "rst-usb-eth2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; };

reg_vdd_5v: regulator-5v {