The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 1cc3542c76acb5f59001e3e562eba672f1983355 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2023123024-slogan-getting-5d9e@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

1cc3542c76ac ("gpio: dwapb: mask/unmask IRQ when disable/enale it") 3c938cc5cebc ("gpio: use raw spinlock for gpio chip shadowed data") 2b725265cb08 ("gpio: mlxbf2: Introduce IRQ support") 603607e70e36 ("gpio: mlxbf2: Drop wrong use of ACPI_PTR()") dabe57c3a32d ("gpio: mlxbf2: Convert to device PM ops") 4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller") 5a5bc826fed1 ("gpio: dwapb: Drop redundant check in dwapb_irq_set_type()") 944dcbe84b8a ("gpio: intel-mid: Remove driver for deprecated platform") 93224edf0b9f ("gpio: msc313: MStar MSC313 GPIO driver") 588cc1a02633 ("dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 1cc3542c76acb5f59001e3e562eba672f1983355 Mon Sep 17 00:00:00 2001 From: xiongxin xiongxin@kylinos.cn Date: Wed, 20 Dec 2023 10:29:01 +0800 Subject: [PATCH] gpio: dwapb: mask/unmask IRQ when disable/enale it

In the hardware implementation of the I2C HID driver based on DesignWare GPIO IRQ chip, when the user continues to use the I2C HID device in the suspend process, the I2C HID interrupt will be masked after the resume process is finished.

This is because the disable_irq()/enable_irq() of the DesignWare GPIO driver does not synchronize the IRQ mask register state. In normal use of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions are called in pairs. In case of an exception, i2c_hid_core_suspend() calls disable_irq() to disable the GPIO IRQ. With low probability, this causes irq_unmask() to not be called, which causes the GPIO IRQ to be masked and not unmasked in enable_irq(), raising an exception.

Add synchronization to the masked register state in the dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ before disabling it. After enabling the GPIO IRQ, unmask the IRQ.

Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block") Cc: stable@kernel.org Co-developed-by: Riwen Lu luriwen@kylinos.cn Signed-off-by: Riwen Lu luriwen@kylinos.cn Signed-off-by: xiongxin xiongxin@kylinos.cn Acked-by: Serge Semin fancer.lancer@gmail.com Reviewed-by: Andy Shevchenko andy@kernel.org Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 4a4f61bf6c58..8c59332429c2 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -282,13 +282,15 @@ static void dwapb_irq_enable(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct dwapb_gpio *gpio = to_dwapb_gpio(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); unsigned long flags; u32 val;

raw_spin_lock_irqsave(&gc->bgpio_lock, flags); - val = dwapb_read(gpio, GPIO_INTEN); - val |= BIT(irqd_to_hwirq(d)); + val = dwapb_read(gpio, GPIO_INTEN) | BIT(hwirq); dwapb_write(gpio, GPIO_INTEN, val); + val = dwapb_read(gpio, GPIO_INTMASK) & ~BIT(hwirq); + dwapb_write(gpio, GPIO_INTMASK, val); raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags); }

@@ -296,12 +298,14 @@ static void dwapb_irq_disable(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct dwapb_gpio *gpio = to_dwapb_gpio(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); unsigned long flags; u32 val;

raw_spin_lock_irqsave(&gc->bgpio_lock, flags); - val = dwapb_read(gpio, GPIO_INTEN); - val &= ~BIT(irqd_to_hwirq(d)); + val = dwapb_read(gpio, GPIO_INTMASK) | BIT(hwirq); + dwapb_write(gpio, GPIO_INTMASK, val); + val = dwapb_read(gpio, GPIO_INTEN) & ~BIT(hwirq); dwapb_write(gpio, GPIO_INTEN, val); raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags); }