From: Yuji Sasaki sasakiy@chromium.org
[ Upstream commit 136b5cd2e2f97581ae560cff0db2a3b5369112da ]
spi_qup_suspend() will cause synchronous external abort when runtime suspend is enabled and applied, as it tries to access SPI controller register while clock is already disabled in spi_qup_pm_suspend_runtime().
Signed-off-by: Yuji sasaki sasakiy@chromium.org Signed-off-by: Vinod Koul vkoul@kernel.org Link: https://lore.kernel.org/r/20200214074340.2286170-1-vkoul@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-qup.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 1bfa889b8427a..88b108e1c85fe 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -974,6 +974,11 @@ static int spi_qup_suspend(struct device *device) struct spi_qup *controller = spi_master_get_devdata(master); int ret;
+ if (pm_runtime_suspended(device)) { + ret = spi_qup_pm_resume_runtime(device); + if (ret) + return ret; + } ret = spi_master_suspend(master); if (ret) return ret; @@ -982,10 +987,8 @@ static int spi_qup_suspend(struct device *device) if (ret) return ret;
- if (!pm_runtime_suspended(device)) { - clk_disable_unprepare(controller->cclk); - clk_disable_unprepare(controller->iclk); - } + clk_disable_unprepare(controller->cclk); + clk_disable_unprepare(controller->iclk); return 0; }
From: "Naveen N. Rao" naveen.n.rao@linux.vnet.ibm.com
[ Upstream commit cb0cc635c7a9fa8a3a0f75d4d896721819c63add ]
Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld: ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF'
Include .BTF section in vmlinux explicitly to fix the same.
Signed-off-by: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200220113132.857132-1-naveen.n.rao@linux.vnet.ib... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/vmlinux.lds.S | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 50d3650608558..c20510497c49d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -315,6 +315,12 @@ SECTIONS *(.branch_lt) }
+#ifdef CONFIG_DEBUG_INFO_BTF + .BTF : AT(ADDR(.BTF) - LOAD_OFFSET) { + *(.BTF) + } +#endif + .opd : AT(ADDR(.opd) - LOAD_OFFSET) { *(.opd) }
From: Kishon Vijay Abraham I kishon@ti.com
[ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ]
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI devices not described in the DT. Certain DRA7 platforms (e.g., DRA76) has RAM above 32-bit boundary (accessible with LPAE config) though the PCIe bridge will be able to access only 32-bits. Add 'dma-ranges' property in PCIe RC DT nodes to indicate the host bridge can access only 32 bits.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/dra7.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a1a928064b53d..f94064c687789 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -282,6 +282,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -319,6 +320,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>;
From: Thommy Jakobsson thommyj@gmail.com
[ Upstream commit 5dd8304981ecffa77bb72b1c57c4be5dfe6cfae9 ]
In the public interface for chipselect, there is always an entry commented as "Dummy generic FIFO entry" pushed down to the fifo right after the activate/deactivate command. The dummy entry is 0x0, irregardless if the intention was to activate or deactive the cs. This causes the cs line to glitch rather than beeing activated in the case when there was an activate command.
This has been observed on oscilloscope, and have caused problems for at least one specific flash device type connected to the qspi port. After the change the glitch is gone and cs goes active when intended.
The reason why this worked before (except for the glitch) was because when sending the actual data, the CS bits are once again set. Since most flashes uses mode 0, there is always a half clk period anyway for cs to clk active setup time. If someone would rely on timing from a chip_select call to a transfer_one, it would fail though.
It is unknown why the dummy entry was there in the first place, git log seems to be of no help in this case. The reference manual gives no indication of the necessity of this. In fact the lower 8 bits are a setup (or hold in case of deactivate) time expressed in cycles. So this should not be needed to fulfill any setup/hold timings.
Signed-off-by: Thommy Jakobsson thommyj@gmail.com Reviewed-by: Naga Sureshkumar Relli naga.sureshkumar.relli@xilinx.com Link: https://lore.kernel.org/r/20200224162643.29102-1-thommyj@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-zynqmp-gqspi.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index 18aeaceee2862..d26c0eda2d9ea 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -415,9 +415,6 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
- /* Dummy generic FIFO entry */ - zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0); - /* Manually start the generic FIFO command */ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]
Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe.
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Reviewed-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index e07cb1fe48604..5e202af7fbf53 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1775,8 +1775,9 @@ static int exynos_dsi_probe(struct platform_device *pdev) ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies), dsi->supplies); if (ret) { - dev_info(dev, "failed to get regulators: %d\n", ret); - return -EPROBE_DEFER; + if (ret != -EPROBE_DEFER) + dev_info(dev, "failed to get regulators: %d\n", ret); + return ret; }
dsi->clks = devm_kzalloc(dev,
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]
Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module:
Unable to handle kernel paging request at virtual address bf047978 pgd = (ptrval) [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f Internal error: Oops: 80f [#1] SMP ARM Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326 videodev: Linux video capture interface: v2.00 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm] LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm] ... Process systemd-udevd (pid: 212, stack limit = 0x(ptrval)) ... [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4) [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350) [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0) [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60) [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc) [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4) [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8) [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110) [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210) [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310) [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc) [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xd979bfa8 to 0xd979bff0) ... ---[ end trace db16efe05faab470 ]---
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Reviewed-by: Andrzej Hajda a.hajda@samsung.com Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 5e202af7fbf53..2b6c04acb24f5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1790,9 +1790,10 @@ static int exynos_dsi_probe(struct platform_device *pdev) dsi->clks[i] = devm_clk_get(dev, clk_names[i]); if (IS_ERR(dsi->clks[i])) { if (strcmp(clk_names[i], "sclk_mipi") == 0) { - strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME); - i--; - continue; + dsi->clks[i] = devm_clk_get(dev, + OLD_SCLK_MIPI_CLK_NAME); + if (!IS_ERR(dsi->clks[i])) + continue; }
dev_info(dev, "failed to get the clock: %s\n",
From: Daniel Axtens dja@axtens.net
[ Upstream commit 3745488e9d599916a0b40d45d3f30e3d4720288e ]
altera_get_note is called from altera_init, where key is kzalloc(33).
When the allocation functions are annotated to allow the compiler to see the sizes of objects, and with FORTIFY_SOURCE, we see:
In file included from drivers/misc/altera-stapl/altera.c:14:0: In function ‘strlcpy’, inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5: include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter __write_overflow(); ^~~~~~~~~~~~~~~~~~
That refers to this code in altera_get_note:
if (key != NULL) strlcpy(key, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i)])], length);
The error triggers because the length of 'key' is 33, but the copy uses length supplied as the 'length' parameter, which is always 256. Split the size parameter into key_len and val_len, and use the appropriate length depending on what is being copied.
Detected by compiler error, only compile-tested.
Cc: "Igor M. Liplianin" liplianin@netup.ru Signed-off-by: Daniel Axtens dja@axtens.net Link: https://lore.kernel.org/r/20200120074344.504-2-dja@axtens.net Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescook Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/altera-stapl/altera.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c index 494e263daa748..b7ee8043a133e 100644 --- a/drivers/misc/altera-stapl/altera.c +++ b/drivers/misc/altera-stapl/altera.c @@ -2126,8 +2126,8 @@ static int altera_execute(struct altera_state *astate, return status; }
-static int altera_get_note(u8 *p, s32 program_size, - s32 *offset, char *key, char *value, int length) +static int altera_get_note(u8 *p, s32 program_size, s32 *offset, + char *key, char *value, int keylen, int vallen) /* * Gets key and value of NOTE fields in the JBC file. * Can be called in two modes: if offset pointer is NULL, @@ -2184,7 +2184,7 @@ static int altera_get_note(u8 *p, s32 program_size, &p[note_table + (8 * i) + 4])];
if (value != NULL) - strlcpy(value, value_ptr, length); + strlcpy(value, value_ptr, vallen);
} } @@ -2203,13 +2203,13 @@ static int altera_get_note(u8 *p, s32 program_size, strlcpy(key, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i)])], - length); + keylen);
if (value != NULL) strlcpy(value, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i) + 4])], - length); + vallen);
*offset = i + 1; } @@ -2463,7 +2463,7 @@ int altera_init(struct altera_config *config, const struct firmware *fw) __func__, (format_version == 2) ? "Jam STAPL" : "pre-standardized Jam 1.1"); while (altera_get_note((u8 *)fw->data, fw->size, - &offset, key, value, 256) == 0) + &offset, key, value, 32, 256) == 0) printk(KERN_INFO "%s: NOTE "%s" = "%s"\n", __func__, key, value); }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin