The lirc config documented here https://www.blushingpenguin.com/mark/blog/?p=24 uses raw_codes for sending IR. Each key only has one pulse, which in fact is an index into the haup-ir-blaster.bin file. Changing the driver to LIRCCODE (although more accurate) breaks this configuration.

This code has been replaced completely in kernel v4.16 by a new driver, see commit acaa34bf06e9 ("media: rc: implement zilog transmitter"), and commit f95367a7b758 ("media: staging: remove lirc_zilog driver").

This reverts commit 89d8a2cc51d1f29ea24a0b44dde13253141190a0.

Fixes: 615cd3fe6ccc ("[media] media: lirc_dev: make better use of file->private_data")

Cc: stable@vger.kernel.org # v4.14-v4.15 Reported-by: Warren Sturm warren.sturm@gmail.com Tested-by: Warren Sturm warren.sturm@gmail.com Signed-off-by: Sean Young sean@mess.org --- drivers/staging/media/lirc/lirc_zilog.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c index 71af13bd0ebd..26dd32d5b5b2 100644 --- a/drivers/staging/media/lirc/lirc_zilog.c +++ b/drivers/staging/media/lirc/lirc_zilog.c @@ -288,7 +288,7 @@ static void release_ir_tx(struct kref *ref) struct IR_tx *tx = container_of(ref, struct IR_tx, ref); struct IR *ir = tx->ir;

- ir->l.features &= ~LIRC_CAN_SEND_LIRCCODE; + ir->l.features &= ~LIRC_CAN_SEND_PULSE; /* Don't put_ir_device(tx->ir) here, so our lock doesn't get freed */ ir->tx = NULL; kfree(tx); @@ -1267,14 +1267,14 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) if (!(features & LIRC_CAN_SEND_MASK)) return -ENOTTY;

- result = put_user(LIRC_MODE_LIRCCODE, uptr); + result = put_user(LIRC_MODE_PULSE, uptr); break; case LIRC_SET_SEND_MODE: if (!(features & LIRC_CAN_SEND_MASK)) return -ENOTTY;

result = get_user(mode, uptr); - if (!result && mode != LIRC_MODE_LIRCCODE) + if (!result && mode != LIRC_MODE_PULSE) return -EINVAL; break; default: @@ -1512,7 +1512,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) kref_init(&tx->ref); ir->tx = tx;

- ir->l.features |= LIRC_CAN_SEND_LIRCCODE; + ir->l.features |= LIRC_CAN_SEND_PULSE; mutex_init(&tx->client_lock); tx->c = client; tx->need_boot = 1;