Hi,

On 2018년 02월 19일 22:20, Hans de Goede wrote:

Sometimes (firmware bug?) the V5 boost GPIO is not configured as output by the BIOS, leading to the 5V boost convertor being permanently on,

Explicitly set the direction and drv flags rather then inheriting them from the firmware to fix this.

Fixes: 585cb239f4de ("extcon: intel-cht-wc: Disable external 5v boost ...") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Hans de Goede hdegoede@redhat.com

---

Changes in v2:

-Add Fixes tag and Cc: stable

drivers/extcon/extcon-intel-cht-wc.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c index 7c4bc8c44c3f..b7e9ea377d70 100644 --- a/drivers/extcon/extcon-intel-cht-wc.c +++ b/drivers/extcon/extcon-intel-cht-wc.c @@ -66,6 +66,8 @@ #define CHT_WC_VBUS_GPIO_CTLO 0x6e2d #define CHT_WC_VBUS_GPIO_CTLO_OUTPUT BIT(0) +#define CHT_WC_VBUS_GPIO_CTLO_DRV_OD BIT(4) +#define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT BIT(5) enum cht_wc_usb_id { USB_ID_OTG, @@ -183,14 +185,15 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext, { int ret, val;

• val = enable ? CHT_WC_VBUS_GPIO_CTLO_OUTPUT : 0;
• /*
  • The 5V boost converter is enabled through a gpio on the PMIC, since
  • there currently is no gpio driver we access the gpio reg directly.
  */
• ret = regmap_update_bits(ext->regmap, CHT_WC_VBUS_GPIO_CTLO,

• 		 CHT_WC_VBUS_GPIO_CTLO_OUTPUT, val);
  

• val = CHT_WC_VBUS_GPIO_CTLO_DRV_OD | CHT_WC_VBUS_GPIO_CTLO_DIR_OUT;
• if (enable)

• val |= CHT_WC_VBUS_GPIO_CTLO_OUTPUT;
  

• ret = regmap_write(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, val); if (ret) dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);

}

Applied it to extcon-fixes branch.