From: Yan Yan evitayan@google.com
[ Upstream commit e03c3bba351f99ad932e8f06baa9da1afc418e02 ]
xfrm_migrate cannot handle address family change of an xfrm_state. The symptons are the xfrm_state will be migrated to a wrong address, and sending as well as receiving packets wil be broken.
This commit fixes it by breaking the original xfrm_state_clone method into two steps so as to update the props.family before running xfrm_init_state. As the result, xfrm_state's inner mode, outer mode, type and IP header length in xfrm_state_migrate can be updated with the new address family.
Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1885354
Signed-off-by: Yan Yan evitayan@google.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_state.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 5164dfe0aa09..2c17fbdd2366 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1421,9 +1421,6 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig,
memcpy(&x->mark, &orig->mark, sizeof(x->mark));
- if (xfrm_init_state(x) < 0) - goto error; - x->props.flags = orig->props.flags; x->props.extra_flags = orig->props.extra_flags;
@@ -1501,6 +1498,11 @@ struct xfrm_state *xfrm_state_migrate(struct xfrm_state *x, if (!xc) return NULL;
+ xc->props.family = m->new_family; + + if (xfrm_init_state(xc) < 0) + goto error; + memcpy(&xc->id.daddr, &m->new_daddr, sizeof(xc->id.daddr)); memcpy(&xc->props.saddr, &m->new_saddr, sizeof(xc->props.saddr));
From: Jakob Unterwurzacher jakob.unterwurzacher@theobroma-systems.com
[ Upstream commit 62966cbdda8a92f82d966a45aa671e788b2006f7 ]
There are signal integrity issues running the eMMC at 200MHz on Puma RK3399-Q7.
Similar to the work-around found for RK3399 Gru boards, lowering the frequency to 100MHz made the eMMC much more stable, so let's lower the frequency to 100MHz.
It might be possible to run at 150MHz as on RK3399 Gru boards but only 100MHz was extensively tested.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Jakob Unterwurzacher jakob.unterwurzacher@theobroma-systems.com Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 0d5679380b2a..70fe6013d17c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -484,6 +484,12 @@ vcc5v0_host_en: vcc5v0-host-en { };
&sdhci { + /* + * Signal integrity isn't great at 200MHz but 100MHz has proven stable + * enough. + */ + max-frequency = <100000000>; + bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe;
From: Corentin Labbe clabbe@baylibre.com
[ Upstream commit 3916c3619599a3970d3e6f98fb430b7c46266ada ]
crypto-controller had a typo, fix it. In the same time, rename it to just crypto
Signed-off-by: Corentin Labbe clabbe@baylibre.com Acked-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Link: https://lore.kernel.org/r/20220209120355.1985707-1-clabbe@baylibre.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3288.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 9adb58930c08..872e4e690beb 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -943,7 +943,7 @@ i2s: i2s@ff890000 { status = "disabled"; };
- crypto: cypto-controller@ff8a0000 { + crypto: crypto@ff8a0000 { compatible = "rockchip,rk3288-crypto"; reg = <0x0 0xff8a0000 0x0 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
From: Alexander Lobakin alobakin@pm.me
[ Upstream commit f2703def339c793674010cc9f01bfe4980231808 ]
After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following:
[ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done.
...for each but CPU 0/boot. Basic debug printks right before the mentioned line say:
[ 0.048170] CPU: 1, smt_mask:
So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS).
A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them:
[ 0.048433] CPU: 1, smt_mask: 0-1
[0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76...
Signed-off-by: Alexander Lobakin alobakin@pm.me Reviewed-by: Philippe Mathieu-Daudé f4bug@amsat.org Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/kernel/smp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 88be966d3e61..f057b0c34844 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -372,6 +372,9 @@ asmlinkage void start_secondary(void) cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy;
+ set_cpu_sibling_map(cpu); + set_cpu_core_map(cpu); + cpumask_set_cpu(cpu, &cpu_coherent_mask); notify_cpu_starting(cpu);
@@ -383,9 +386,6 @@ asmlinkage void start_secondary(void) /* The CPU is running and counters synchronised, now mark it online */ set_cpu_online(cpu, true);
- set_cpu_sibling_map(cpu); - set_cpu_core_map(cpu); - calculate_cpu_foreign_map();
/*
From: Julian Braha julianbraha@gmail.com
[ Upstream commit 11c57c3ba94da74c3446924260e34e0b1950b5d7 ]
Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :)
When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n]
This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE.
This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution.
Signed-off-by: Julian Braha julianbraha@gmail.com Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- lib/Kconfig | 1 - 1 file changed, 1 deletion(-)
diff --git a/lib/Kconfig b/lib/Kconfig index 8396c4cfa1ab..1a33e9365951 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -16,7 +16,6 @@ config BITREVERSE config HAVE_ARCH_BITREVERSE bool default n - depends on BITREVERSE help This option enables the use of hardware bit-reversal instructions on architectures which support such operations.
From: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com
[ Upstream commit c5048a7b2c23ab589f3476a783bd586b663eda5b ]
Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device.
Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@... Reported-by: Pavel Machek pavel@denx.de Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Pavel Machek pavel@denx.de Reviewed-by: Ulrich Hecht uli+renesas@fpond.eu Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/rcar/rcar_canfd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 786d852a70d5..a1634834b640 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -1602,15 +1602,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll, RCANFD_NAPI_WEIGHT); + spin_lock_init(&priv->tx_lock); + devm_can_led_init(ndev); + gpriv->ch[priv->channel] = priv; err = register_candev(ndev); if (err) { dev_err(&pdev->dev, "register_candev() failed, error %d\n", err); goto fail_candev; } - spin_lock_init(&priv->tx_lock); - devm_can_led_init(ndev); - gpriv->ch[priv->channel] = priv; dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel); return 0;
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit d4e26aaea7f82ba884dcb4acfe689406bc092dc3 ]
The function ioremap() in fs_init() can fail, so its return value should be checked.
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/firestream.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index e7cffd0cc361..3557ff9ecd82 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1692,6 +1692,8 @@ static int fs_init(struct fs_dev *dev) dev->hw_base = pci_resource_start(pci_dev, 0);
dev->base = ioremap(dev->hw_base, 0x1000); + if (!dev->base) + return 1;
reset_chip (dev);
From: Sreeramya Soratkal quic_ssramya@quicinc.com
[ Upstream commit e50b88c4f076242358b66ddb67482b96947438f2 ]
The wdev channel information is updated post channel switch only for the station mode and not for the other modes. Due to this, the P2P client still points to the old value though it moved to the new channel when the channel change is induced from the P2P GO.
Update the bss channel after CSA channel switch completion for P2P client interface as well.
Signed-off-by: Sreeramya Soratkal quic_ssramya@quicinc.com Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@qui... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/nl80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index bbc3c876a5d8..7085c54e6e50 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -14777,7 +14777,8 @@ void cfg80211_ch_switch_notify(struct net_device *dev, wdev->chandef = *chandef; wdev->preset_chandef = *chandef;
- if (wdev->iftype == NL80211_IFTYPE_STATION && + if ((wdev->iftype == NL80211_IFTYPE_STATION || + wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) && !WARN_ON(!wdev->current_bss)) wdev->current_bss->pub.channel = chandef->chan;
From: Eric Dumazet edumazet@google.com
[ Upstream commit e3d5ea2c011ecb16fb94c56a659364e6b30fac94 ]
If recv_actor() returns an incorrect value, tcp_read_sock() might loop forever.
Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: John Fastabend john.fastabend@gmail.com Acked-by: Jakub Sitnicki jakub@cloudflare.com Acked-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index c9f6f28e54f3..a0fd9ef2d2c6 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1657,11 +1657,13 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc, if (!copied) copied = used; break; - } else if (used <= len) { - seq += used; - copied += used; - offset += used; } + if (WARN_ON_ONCE(used > len)) + used = len; + seq += used; + copied += used; + offset += used; + /* If recv_actor drops the lock (e.g. TCP splice * receive) the skb pointer might be invalid when * getting here: tcp_collapse might have deleted it
From: Niels Dossche dossche.niels@gmail.com
[ Upstream commit f1fb205efb0ccca55626fd4ef38570dd16b44719 ]
seqno could be read as a stale value outside of the lock. The lock is already acquired to protect the modification of seqno against a possible race condition. Place the reading of this value also inside this locking to protect it against a possible race condition.
Signed-off-by: Niels Dossche dossche.niels@gmail.com Acked-by: Martin Habets habetsm.xilinx@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/mcdi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index 3df872f56289..040b52affe19 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -167,9 +167,9 @@ static void efx_mcdi_send_request(struct efx_nic *efx, unsigned cmd, /* Serialise with efx_mcdi_ev_cpl() and efx_mcdi_ev_death() */ spin_lock_bh(&mcdi->iface_lock); ++mcdi->seqno; + seqno = mcdi->seqno & SEQ_MASK; spin_unlock_bh(&mcdi->iface_lock);
- seqno = mcdi->seqno & SEQ_MASK; xflags = 0; if (mcdi->mode == MCDI_MODE_EVENTS) xflags |= MCDI_HEADER_XFLAGS_EVREQ;
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 8ccffe9ac3239e549beaa0a9d5e1a1eac94e866c ]
Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 299cefe6f94b..21e32d732c3f 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8234,7 +8234,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) rc = pci_set_consistent_dma_mask(pdev, persist_dma_mask); if (rc) { dev_err(&pdev->dev, - "pci_set_consistent_dma_mask failed, aborting\n"); + "dma_set_coherent_mask failed, aborting\n"); goto err_out_unmap; } } else if ((rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
From: Chengming Zhou zhouchengming@bytedance.com
[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test': userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use in this function); did you mean `MADV_RANDOM'? if (madvise(area_dst, test_pgsize, MADV_PAGEOUT)) ^~~~~~~~~~~~ MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is useful to fix tests build on systems without these definitions in glibc sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com Signed-off-by: Chengming Zhou zhouchengming@bytedance.com Reviewed-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/vm/userfaultfd.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 1963440f6725..b2c7043c0c30 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -60,6 +60,7 @@ #include <signal.h> #include <poll.h> #include <string.h> +#include <linux/mman.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/ioctl.h>
linux-stable-mirror@lists.linaro.org
-
Sasha Levin